Merge branch 'master' into sverk/master/halt-INT_MIN

1 files changed, 0 insertions, 1694 deletions

diff --git a/lib/test_server/doc/src/notes.xml b/lib/test_server/doc/src/notes.xml
deleted file mode 100644
index b48bda94d0..0000000000
--- a/lib/test_server/doc/src/notes.xml
+++ /dev/null
@@ -1,1694 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE chapter SYSTEM "chapter.dtd">
-
-<chapter>
-  <header>
-    <copyright>
-      <year>2004</year><year>2013</year>
-      <holder>Ericsson AB. All Rights Reserved.</holder>
-    </copyright>
-    <legalnotice>
-      Licensed under the Apache License, Version 2.0 (the "License");
-      you may not use this file except in compliance with the License.
-      You may obtain a copy of the License at
- 
-          http://www.apache.org/licenses/LICENSE-2.0
-
-      Unless required by applicable law or agreed to in writing, software
-      distributed under the License is distributed on an "AS IS" BASIS,
-      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-      See the License for the specific language governing permissions and
-      limitations under the License.
-
-    </legalnotice>
-
-    <title>APPLICATION Release Notes</title>
-    <prepared>Peter Andersson</prepared>
-    <responsible>Peter Andersson</responsible>
-    <docno></docno>
-    <approved></approved>
-    <checked></checked>
-    <date>2007-11-30</date>
-    <rev>A</rev>
-    <file>notes.xml</file>
-  </header>
-
-<section><title>Test_Server 3.9.1</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    When generating Makefile from Makefile.src,
-	    ts_lib:get_arg/4 earlier removed all spaces in the
-	    extracted argument. The code was probably meant for
-	    removing leading and trailing spaces only, and is now
-	    corrected to do so.</p>
-          <p>
-	    Own Id: OTP-13015</p>
-        </item>
-        <item>
-          <p>
-	    With the Common Test 'create_priv_dir' start option set
-	    to 'auto_per_tc', the name of the priv directory for a
-	    configuration function could clash with the name of the
-	    priv directory for a test case, which would cause Test
-	    Server failure. This error has been corrected.</p>
-          <p>
-	    Own Id: OTP-13181</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.9</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    The status of an aborted test due to test suite
-	    compilation error has changed from 'auto_skipped' to
-	    'failed'. This affects both the textual log file, event
-	    handling and CT hook callbacks. The logging of
-	    compilation failures has also been improved, especially
-	    in the case of multiple test suites failing compilation.</p>
-          <p>
-	    Own Id: OTP-10816</p>
-        </item>
-        <item>
-          <p>
-	    The Test Server source code parser (erl2html2) failed to
-	    handle the macro tuple in the syntax tree returned by
-	    epp_dodger. This error has been corrected.</p>
-          <p>
-	    Own Id: OTP-12740</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    The Test Server application has been marked as obsolete
-	    and will be removed from OTP in the next major release
-	    (OTP 19.0).</p>
-          <p>
-	    Own Id: OTP-10923 Aux Id: OTP-12705 </p>
-        </item>
-        <item>
-          <p>
-	    When running OTP tests using the ts interface, it is now
-	    possible to specify so called test categories per OTP
-	    application. A test category is represented by a CT test
-	    specification and defines an arbitrary subset of existing
-	    test suites, groups and cases. Examples of test
-	    categories are 'smoke' (smoke tests) and 'bench'
-	    (benchmarks). (Call ts:help() for more info). Also,
-	    functions for reading terms from the current test
-	    specification during test, ct:get_testspec_terms/0 and
-	    ct:get_testspec_terms/1, have been implemented.</p>
-          <p>
-	    Own Id: OTP-11962</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.8.1</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    If the last expression in a test case causes a timetrap
-	    timeout, the stack trace is ignored and not printed to
-	    the test case log file. This happens because the
-	    {Suite,TestCase,Line} info is not available in the stack
-	    trace in this scenario, due to tail call elimination.
-	    Common Test has been modified to handle this situation by
-	    inserting a {Suite,TestCase,last_expr} tuple in the
-	    correct place and printing the stack trace as expected.</p>
-          <p>
-	    Own Id: OTP-12697 Aux Id: seq12848 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.8</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    When installing test suites in a cross compilation
-	    environment, ts_install was not able to read the values
-	    of the environment variables specified in the
-	    configuration file. This has been fixed.</p>
-          <p>
-	    Own Id: OTP-11441</p>
-        </item>
-        <item>
-          <p>
-	    Printouts by means of ct:log/2/3 or ct:pal/2/3 from the
-	    hook functions on_tc_fail/2 and on_tc_skip/2 would (quite
-	    unexpectedly) end up in the "unexpected i/o" log file
-	    instead of in the test case log file. This behaviour has
-	    been changed so that now, all printouts (including stdio
-	    printouts) from these hook functions will be routed to
-	    the test case log file.</p>
-          <p>
-	    Own Id: OTP-12468</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    The format of the information printed on top of the test
-	    case (and configuration function) log file has been
-	    slightly modified, mainly in order to make the start
-	    configuration data easier to read and interpret.</p>
-          <p>
-	    Own Id: OTP-12518 Aux Id: seq12808 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.7.2</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    The source code to html code generator in Test Server
-	    (and Common Test) would fail to generate anchors in the
-	    html code for functions with non-expandable macros,
-	    resulting in bad html links to such functions. This
-	    correction lets the code generator ignore macros that
-	    can't be expanded (i.e. not pre-process them), so that
-	    correct anchors will always be produced.</p>
-          <p>
-	    Own Id: OTP-11766 Aux Id: seq12556 </p>
-        </item>
-        <item>
-          <p>
-	    Make sure to install .hrl files when needed</p>
-          <p>
-	    Own Id: OTP-12197</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Distribute <c>autoconf</c> helpers to applications at
-	    build time instead of having multiple identical copies
-	    committed in the repository.</p>
-          <p>
-	    Own Id: OTP-12348</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.7.1</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    The mechanism for running code cover analysis with
-	    common_test has been improved. Earlier, if a test run
-	    consisted of multiple tests, cover would be started and
-	    stopped for each test. This would give "intermediate"
-	    cover logs available from the "Coverage log" link on the
-	    test suite result pages. To accumulate cover data over
-	    all tests, the 'export' option had to be used in the
-	    cover spec file. This was not well documented, and the
-	    functionality was quite confusing.</p>
-          <p>
-	    Using the 'nodes' option in the cover spec file would
-	    fail when the test run consisted of multiple tests, since
-	    the specified nodes would only be included in the cover
-	    analysis of the first test.</p>
-          <p>
-	    The repeated compilation and analysis of the same modules
-	    was also very time consuming.</p>
-          <p>
-	    To overcome these problems, ct will now only cover
-	    compile and analyze modules once per test run, i.e. once
-	    for each cover spec file. The log file is available via a
-	    new button on the top level index page. The old "Coverage
-	    log" links on the test suite result pages still exist,
-	    but they all point to the same log containing the
-	    accumulated result.</p>
-          <p>
-	    Own Id: OTP-11971</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.7</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Application upgrade (appup) files are corrected for the
-	    following applications: </p>
-          <p>
-	    <c>asn1, common_test, compiler, crypto, debugger,
-	    dialyzer, edoc, eldap, erl_docgen, et, eunit, gs, hipe,
-	    inets, observer, odbc, os_mon, otp_mibs, parsetools,
-	    percept, public_key, reltool, runtime_tools, ssh,
-	    syntax_tools, test_server, tools, typer, webtool, wx,
-	    xmerl</c></p>
-          <p>
-	    A new test utility for testing appup files is added to
-	    test_server. This is now used by most applications in
-	    OTP.</p>
-          <p>
-	    (Thanks to Tobias Schlager)</p>
-          <p>
-	    Own Id: OTP-11744</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Calls to erlang:open_port/2 with 'spawn' are updated to
-	    handle space in the command path.</p>
-          <p>
-	    Own Id: OTP-10842</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.6.4</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-	    <p>The way Common Test handles skipping of test cases has
-	    been updated. In previous versions, returning
-	    <c>{skip,Reason}</c> from a configuration function (such
-	    as init_per_suite or init_per_group), resulted in all
-	    affected test cases getting skipped with status
-	    <c>auto_skipped</c>. This was inappropriate, since this
-	    status is supposed to be used to inform that Common Test
-	    has taken the initiative to skip something (e.g. a test
-	    case group if init_per_group failed). Therefore, in this
-	    version of Common Test, whenever the user skips a suite,
-	    group, or individual test case (by means of a
-	    configuration function or test specification term), the
-	    affected test cases get the status <c>user_skipped</c>
-	    instead.</p> <p>This update has meant a few changes that
-	    may affect Common Test users in various ways:</p> <list>
-	    <item>The test results and statistics will be affected,
-	    which is important to know when running regression tests
-	    and comparing results to previous test runs.</item>
-	    <item>Users that read or parse the textual log file
-	    <c>suite.log</c> will notice that an auto skipped
-	    function is now reported as <c>auto_skipped</c> rather
-	    than <c>skipped</c> as before.</item> <item>When
-	    <c>require</c> fails in an info function (such as suite/0
-	    or group/1), all affected configuration functions and
-	    test cases are marked as <c>auto_skipped</c>.</item>
-	    <item>If Common Test detects an error in the test suite
-	    (such as e.g. an invalid all/0 function), all affected
-	    configuration functions and test cases are marked as
-	    <c>auto_skipped</c>.</item> <item>If a repeated test run
-	    session reaches a deadline with <c>force_stop</c>
-	    enabled, all remaining test cases are marked as
-	    <c>auto_skipped</c> rather than <c>user_skipped</c> as
-	    before.</item> <item>The event messages that Common Test
-	    generates during test runs have been affected by this
-	    update. For details see OTP-11524.</item> </list>
-          <p>
-	    Own Id: OTP-11305 Aux Id: OTP-11524 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.6.3</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Test Server installed an error handler (test_server_h)
-	    only to be able to write the name of the current test
-	    case to stdout whenever it received an error- or progress
-	    report. This functionality was not useful and has been
-	    removed. The built-in Common Test hook, cth_log_redirect,
-	    has instead been improved to now also tag all error- and
-	    progress reports in the log with suite-, group-, and/or
-	    test case name.</p>
-          <p>
-	    Own Id: OTP-11263 Aux Id: seq12251 </p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    A new log, the "Pre- and Post Test I/O Log", has been
-	    introduced, which makes it possible to capture error- and
-	    progress reports, as well as printouts made with ct:log/2
-	    and ct:pal/2, before and after a test run. (Some minor
-	    improvements of the logging system have been made at the
-	    same time). Links to the new log are found on the Common
-	    Test Framework Log page. The Common Test User's Guide has
-	    been updated with information about the new log and also
-	    with a new section on how to synchronize external
-	    applications with Common Test by means of the CT Hook
-	    init and terminate functions.</p>
-          <p>
-	    Own Id: OTP-11272</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Known Bugs and Problems</title>
-      <list>
-        <item>
-          <p>
-	    Test Server: Report auto_skipped in major log.</p>
-          <p>
-	    Own Id: OTP-11297</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.6.2</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Some unused code related to remote targets is removed,
-	    and documentation is updated.</p>
-          <p>
-	    Own Id: OTP-10607 Aux Id: kunagi-338 [249] </p>
-        </item>
-        <item>
-          <p>
-	    A bug in test_server_gl caused io requests containing
-	    invalid data (i.e. not unicode:chardata()) to hang, since
-	    no io reply was sent. This has been corrected.</p>
-          <p>
-	    Own Id: OTP-10991</p>
-        </item>
-        <item>
-          <p>
-	    Common Test would, in case of timetrap error, print a
-	    warning in the log if end_per_testcase wasn't implemented
-	    in the suite, even though it's an optional function. This
-	    printout has been removed.</p>
-          <p>
-	    Own Id: OTP-11052</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    The '-force_stop' flag to use with time-limited repeats
-	    of test runs can now be used with a new 'skip_rest'
-	    option which causes the rest of the test cases in the
-	    ongoing test job to be skipped when the time limit is
-	    reached. E.g. 'ct_run -spec xxx -duration 010000
-	    -force_stop skip_rest'</p>
-          <p>
-	    Own Id: OTP-10856 Aux Id: OTP-10832 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.6.1</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    The unicode update of test_server for R16A introduced a
-	    few potential errors when logging to files. Sometimes ~tp
-	    or ~ts was used for formatting also when writing to files
-	    that were not opened with the {encoding,utf8} option. If
-	    then the argument contained unicode characters above 255,
-	    the file descriptor would crash. This has been corrected
-	    by the following modifications:</p> <list> <item> Since the
-	    'unexpected_io' log file is used only when the test case
-	    HTML file is not available (e.g. between test cases),
-	    this file is now also a HTML file and as other
-	    test_server HTML logs it is always UTF-8 encoded </item>
-	    <item> Since it is possible to change which information
-	    is going to which log file (with
-	    test_server_ctrl:set_levels/3), we do not have full
-	    control over which information is written to which file.
-	    This means that any printout could be written to the
-	    'major' log file (suite.log), which was earlier encoded
-	    as latin1. To avoid crashing this file descriptor due to
-	    unicode strings, the 'major' log file is now also encoded
-	    in UTF-8 (possible incopatibility). </item> <item> The
-	    cross_cover.info file is no longer a text file which can
-	    be read with file:consult/1, instead it is written as a
-	    pure binary file using term_to_binary when writing and
-	    binary_to_term when reading. </item> <item> The encoding
-	    of the file named 'last_name', which only content is the
-	    path to the last run.&lt;timestamp&gt; directory, is now
-	    dependent on the file name mode of the VM. If file names
-	    are expected to be unicode, then the 'last_name' file is
-	    UTF-8 encoded, else it is latin1 encoded. </item> </list>
-          <p>
-	    Also, ~tp has been changed back to ~p unless it is
-	    somehow likely that the argument includes strings. It is
-	    not obvious that this is the correct thing to do, but
-	    some decission had to be taken...</p>
-          <p>
-	    Own Id: OTP-10780</p>
-        </item>
-        <item>
-          <p>
-	    Using the force_stop flag/option to interrupt a test run
-	    caused a crash in Common Test. This problem has been
-	    solved.</p>
-          <p>
-	    Own Id: OTP-10832</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.6</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Line numbering of erlang files that were not correctly
-	    indented could be wrong after coverting to html with
-	    erl2html2:convert/[2,3] (the source code pointed to from
-	    the test case). This has been corrected.</p>
-          <p>
-	    Also, there are now link targets for each line and not
-	    only for each 10th line, and link targets for functions
-	    now include the arity and not only the function name
-	    (e.g. func/1 has a link target "func-1").</p>
-          <p>
-	    Own Id: OTP-9710 Aux Id: seq11945, kunagi-201 [112] </p>
-        </item>
-        <item>
-          <p>
-	    Severe errors detected by <c>test_server</c> (e.g. if log
-	    files directories cannot be created) will now be reported
-	    to <c>common_test</c> and noted in the <c>common_test</c>
-	    logs.</p>
-          <p>
-	    Own Id: OTP-9769 Aux Id: kunagi-202 [113] </p>
-        </item>
-        <item>
-          <p>
-	    The earlier undocumented cross cover feature for
-	    accumulating cover data over multiple tests has now been
-	    fixed and documented.</p>
-          <p>
-	    Own Id: OTP-9870 Aux Id: kunagi-206 [117] </p>
-        </item>
-        <item>
-          <p>
-	    If the test suite itself was included in code coverage
-	    analysis, then the test_server would not manage to set
-	    data_dir correctly for the test. This has been corrected.</p>
-          <p>
-	    Own Id: OTP-9956 Aux Id: kunagi-207 [118] </p>
-        </item>
-        <item>
-          <p>
-	    Any call to test_server:break/1 should cancel all active
-	    timetramps. However, in some cases
-	    Suite:end_per_testcase/2 is executed on a different
-	    process than the test case itself, and if
-	    test_server:break/1 was called from there, the timetraps
-	    were not cancelled. This has been corrected.</p>
-          <p>
-	    Own Id: OTP-10046 Aux Id: kunagi-174 [85] </p>
-        </item>
-        <item>
-	    <p>When a test case failed because of a timetrap time
-	    out, the <c>Config</c> data for the case was lost in the
-	    following call to <c>end_per_testcase/2</c>, and also in
-	    calls to the CT Hook function
-	    <c>post_end_per_testcase/4</c>. This problem has been
-	    solved and the <c>Config</c> data is now correctly passed
-	    to the above functions after a timetrap timeout
-	    failure.</p>
-          <p>
-	    Own Id: OTP-10070 Aux Id: kunagi-175 [86] </p>
-        </item>
-        <item>
-	    <p>In test_server, the same process would supervise the
-	    currently running test case and be group leader (and IO
-	    server) for the test case. Furthermore, when running
-	    parallel test cases, new temporary supervisor/group
-	    leader processes were spawned and the process that was
-	    group leader for sequential test cases would not be
-	    active. That would lead to several problems:</p>
-	    <p>* Processes started by init_per_suite will inherit the
-	    group leader of the init_per_suite process (and that
-	    group leader would not process IO requests when parallel
-	    test cases was running). If later a parallel test case
-	    caused such a processto print using (for example)
-	    io:format/2, the calling would hang.</p>
-	    <p>* Similarly, if a process was spawned from a parallel
-	    test case, it would inherit the temporary group leader
-	    for that parallel test case. If that spawned process
-	    later - when the group of parallel tests have finished -
-	    attempted to print something, its group leader would be
-	    dead and there would be <c>badarg</c> exception.</p>
-	    <p>Those problems have been solved by having group
-	    leaders separate from the processes that supervises the
-	    test cases, and keeping temporary group leader process
-	    for parallel test cases alive until no more process in
-	    the system use them as group leaders.</p>
-	    <p>Also, a new <c>unexpected_io.log</c> log file
-	    (reachable from the summary page of each test suite) has
-	    been introduced. All unexpected IO will be printed into
-	    it(for example, IO to a group leader for a parallel test
-	    case that has finished).</p>
-          <p>
-	    Own Id: OTP-10101 Aux Id: OTP-10125 </p>
-        </item>
-        <item>
-          <p>
-	    The stability of <c>common_test</c> and
-	    <c>test_server</c> when running test cases in parallel
-	    has been improved.</p>
-          <p>
-	    Own Id: OTP-10480 Aux Id: kunagi-318 [229] </p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Added a general framework for executing benchmarks of
-	    Erlang/OTP. Benchmarks for the Erlang VM and mnesia have
-	    been incorporated in the framework. </p>
-          <p>
-	    For details about how to add more benchmarks see
-	    $ERL_TOP/HOWTO/BENCHMARKS.md in the source distribution.</p>
-          <p>
-	    Own Id: OTP-10156</p>
-        </item>
-        <item>
-          <p>
-	    Update common test modules to handle Unicode:</p> <list>
-	    <item> Use UTF-8 encoding for all HTML files, except the
-	    HTML version of the test suite generated with
-	    erl2html2:convert, which will have the same encoding as
-	    the original test suite (.erl) file. </item> <item>
-	    Encode link targets in HTML files with
-	    test_server_ctrl:uri_encode/1. </item> <item> Use unicode
-	    modifier 't' with ~s when appropriate. </item> <item> Use
-	    unicode:characters_to_list and
-	    unicode:characters_to_binary for conversion between
-	    binaries and strings instead of binary_to_list and
-	    list_to_binary. </item> </list>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.5.3</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    test_server_h will now recognize info_reports written by
-	    ct connection handlers (according to the description in
-	    cth_conn_log) and ignore them as they will be completely
-	    handled by by ct_conn_log_h.</p>
-          <p>
-	    Earlier test_server_h would print a tag (testcase name)
-	    before forwarding the report to error_logger_tty_h. This
-	    would cause lots of tags in the log with no info report
-	    following (since error_logger_tty_h did not handle them).</p>
-          <p>
-	    Own Id: OTP-10571</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Known Bugs and Problems</title>
-      <list>
-        <item>
-          <p>
-	    Restore Config data if lost when test case fails.</p>
-          <p>
-	    Own Id: OTP-10070 Aux Id: kunagi-175 [86] </p>
-        </item>
-        <item>
-          <p>
-	    IO server error in test_server.</p>
-          <p>
-	    Own Id: OTP-10125 Aux Id: OTP-10101, kunagi-177 [88] </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.5.2</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    The documentation has been updated with the latest
-	    changes for the test_server_ctrl:report/2 function.</p>
-          <p>
-	    Own Id: OTP-10086 Aux Id: seq12066 </p>
-        </item>
-        <item>
-          <p>
-	    The ct:get_status/0 function failed to report status if a
-	    parallel test case group was running at the time of the
-	    call. This has been fixed and the return value for the
-	    function has been updated. Please see the ct reference
-	    manual for details.</p>
-          <p>
-	    Own Id: OTP-10172</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    It is now possible to sort the HTML tables by clicking on
-	    the header elements. In order to reset a sorted table,
-	    the browser window should simply be refreshed. This
-	    feature requires that the browser supports javascript,
-	    and has javascript execution enabled. If the 'ct_run
-	    -basic_html' flag is used, no javascript code is included
-	    in the generated HTML code.</p>
-          <p>
-	    Own Id: OTP-9896 Aux Id: seq12034, OTP-9835 </p>
-        </item>
-        <item>
-          <p>
-	    Verbosity levels for log printouts has been added. This
-	    makes it possible to specify preferred verbosity for
-	    different categories of log printouts, as well as general
-	    printouts (such as standard IO), to allow control over
-	    which strings get printed and which get ignored. New
-	    versions of the Common Test logging functions, ct:log,
-	    ct:pal and ct:print, have been introduced, with a new
-	    Importance argument added. The Importance value is
-	    compared to the verbosity level at runtime. More
-	    information can be found in the chapter about Logging in
-	    the Common Test User's Guide.</p>
-          <p>
-	    Own Id: OTP-10067 Aux Id: seq12050 </p>
-        </item>
-        <item>
-          <p>
-	    The Erlang/OTP test runner ts has been extended to allow
-	    cross compilation of test suites. To cross compile the
-	    test suites first follow the normal cross compilation
-	    procedures and release the tests on the build host. Then
-	    install ts using an xcomp specification file and compile
-	    test suites using ts:compile_testcases/0. For more
-	    details see $ERL_TOP/xcomp/README.md.</p>
-          <p>
-	    Own Id: OTP-10074</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.5.1</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    After a test case timeout or abortion, the
-	    end_per_testcase function executes on a new dedicated
-	    process. The group leader for this process should be set
-	    to the IO server for the test case, which was not done
-	    properly. The result of this error was that no warnings
-	    about end_per_testcase failing or timing out were ever
-	    printed in the test case log. Also, help functions such
-	    as e.g. test_server:stop_node/1, attempting to
-	    synchronize with the IO server, would hang. The fault has
-	    been corrected.</p>
-          <p>
-	    Own Id: OTP-9666</p>
-        </item>
-        <item>
-          <p>
-	    A deadlock situation could occur if Common Test is
-	    forwarding error_handler printouts to Test Server at the
-	    same time a new test case is starting. This error has
-	    been fixed.</p>
-          <p>
-	    Own Id: OTP-9894</p>
-        </item>
-        <item>
-          <p>
-	    When a test case was killed because of a timetrap
-	    timeout, the current location (suite, case and line) was
-	    not printed correctly in the log files. This has been
-	    corrected.</p>
-          <p>
-	    Own Id: OTP-9930 Aux Id: seq12002 </p>
-        </item>
-        <item>
-          <p>
-	    Test Server and Common Test would add new error handlers
-	    with each test run and fail to remove previously added
-	    ones. In the case of Test Server, this would only happen
-	    if SASL was not running on the test node. This has been
-	    fixed.</p>
-          <p>
-	    Own Id: OTP-9941 Aux Id: seq12009 </p>
-        </item>
-        <item>
-          <p>
-	    If a test case process was terminated due to an exit
-	    signal from a linked process, Test Server failed to
-	    report the correct name of the suite and case to the
-	    framework. This has been corrected.</p>
-          <p>
-	    Own Id: OTP-9958 Aux Id: OTP-9855 </p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    A new optional feature has been introduced that enables
-	    Common Test to generate priv_dir directory names that are
-	    unique for each test case or config function. The name of
-	    the option/flag is 'create_priv_dir' and it can be set to
-	    value 'auto_per_run' (which is the default, existing,
-	    behaviour), or 'auto_per_tc' or 'manual_per_tc'. If
-	    'auto_per_tc' is used, Test Server creates a dedicated
-	    priv_dir automatically for each test case (which can be
-	    very expensive in case of many and/or repeated cases). If
-	    'manual_per_tc' is used, the user needs to create the
-	    priv_dir explicitly by calling the new function
-	    ct:make_priv_dir/0.</p>
-          <p>
-	    Own Id: OTP-9659 Aux Id: seq11930 </p>
-        </item>
-        <item>
-          <p>
-	    A column for test case group name has been added to the
-	    suite overview HTML log file.</p>
-          <p>
-	    Own Id: OTP-9730 Aux Id: seq11952 </p>
-        </item>
-        <item>
-          <p>
-	    It is now possible to use the post_end_per_testcase CT
-	    hook function to print a comment for a test case in the
-	    overview log file, even if the test case gets killed by a
-	    timetrap or unknown exit signal, or if the
-	    end_per_testcase function times out.</p>
-          <p>
-	    Own Id: OTP-9855 Aux Id: seq11979 </p>
-        </item>
-        <item>
-          <p>
-	    Common Test will now print error information (with a time
-	    stamp) in the test case log file immediately when a test
-	    case fails. This makes it easier to see when, in time,
-	    the fault actually occured, and aid the job of locating
-	    relevant trace and debug printouts in the log.</p>
-          <p>
-	    Own Id: OTP-9904 Aux Id: seq11985, OTP-9900 </p>
-        </item>
-        <item>
-          <p>
-	    Test Server has been modified to check the SASL
-	    errlog_type parameter when receiving an error logger
-	    event, so that it doesn't print reports of type that the
-	    user has disabled.</p>
-          <p>
-	    Own Id: OTP-9955 Aux Id: seq12013 </p>
-        </item>
-        <item>
-          <p>
-	    If an application cannot be found by ts it is
-	    automatically skipped when testing.</p>
-          <p>
-	    Own Id: OTP-9971</p>
-        </item>
-        <item>
-          <p>
-	    By specifying a user defined function ({M,F,A} or fun) as
-	    timetrap value, either by means of an info function or by
-	    calling ct:timetrap/1, it is now possible to set a
-	    timetrap that will be triggered when the user function
-	    returns.</p>
-          <p>
-	    Own Id: OTP-9988 Aux Id: OTP-9501, seq11894 </p>
-        </item>
-        <item>
-          <p>
-	    If the optional configuration functions init_per_suite/1
-	    and end_per_suite/1 are not implemented in the test
-	    suite, local Common Test versions of these functions are
-	    called instead, and will be displayed in the overview log
-	    file. Any printouts made by the pre- or
-	    post_init_per_suite and pre- or post_end_per_suite hook
-	    functions are saved in the log files for these functions.</p>
-          <p>
-	    Own Id: OTP-9992</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.5</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    The test case group info function has been implemented in
-	    Common Test. Before execution of a test case group, a
-	    call is now made to <c>TestSuite:group(GroupName)</c>.
-	    The function returns a list of test properties, e.g. to
-	    specify timetrap values, require configuration data, etc
-	    (analogue to the test suite- and test case info
-	    function). The scope of the properties set by
-	    <c>group(GroupName)</c> is all test cases and sub-groups
-	    of group <c>GroupName</c>.</p>
-          <p>
-	    Own Id: OTP-9235</p>
-        </item>
-        <item>
-          <p>
-	    The look of the HTML log files generated by Common Test
-	    and Test Server has been improved (and made easier to
-	    customize) by means of a CSS file.</p>
-          <p>
-	    Own Id: OTP-9706</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Known Bugs and Problems</title>
-      <list>
-        <item>
-          <p>
-	    Fix problems in CT/TS due to line numbers in exceptions.</p>
-          <p>
-	    Own Id: OTP-9203</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.4.5</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    An error in how comments are colored in the test suite
-	    overview html log file has been corrected. As result, a
-	    new framework callback function, format_comment/1, has
-	    been introduced.</p>
-          <p>
-	    Own Id: OTP-9237</p>
-        </item>
-        <item>
-          <p>
-	    Test Server did not release SASL TTY handlers
-	    (sasl_report_tty_h and error_logger_tty_h) properly after
-	    each test run. This error has been fixed.</p>
-          <p>
-	    Own Id: OTP-9311</p>
-        </item>
-        <item>
-          <p>
-	    Automatically generated init- and end-configuration
-	    functions for test case groups caused incorrect execution
-	    order of test cases. This has been corrected.</p>
-          <p>
-	    Own Id: OTP-9369</p>
-        </item>
-        <item>
-          <p>
-	    If ct:log/2 was called with bad arguments, this could
-	    cause the Common Test IO handling process to crash. This
-	    fault has been corrected.</p>
-          <p>
-	    Own Id: OTP-9371 Aux Id: OTP-8933 </p>
-        </item>
-        <item>
-          <p>
-	    A bug has been fixed that made Test Server call the
-	    end_tc/3 framework function with an incorrect module name
-	    as first argument.</p>
-          <p>
-	    Own Id: OTP-9379 Aux Id: seq11863 </p>
-        </item>
-        <item>
-          <p>
-	    If end_per_testcase caused a timetrap timeout, the actual
-	    test case status was discarded and the test case logged
-	    as successful (even if the case had actually failed
-	    before the call to end_per_testcase). This fault has been
-	    fixed.</p>
-          <p>
-	    Own Id: OTP-9397</p>
-        </item>
-        <item>
-          <p>
-	    If a timetrap timeout occured during execution of of a
-	    function in a lib module (i.e. a function called directly
-	    or indirectly from a test case), the Suite argument in
-	    the end_tc/3 framework callback function would not
-	    correctly contain the name of the test suite, but the lib
-	    module. (This would only happen if the lib module was
-	    compiled with ct.hrl included). This error has been
-	    solved.</p>
-          <p>
-	    Own Id: OTP-9398</p>
-        </item>
-        <item>
-          <p>
-	    Add a proplist() type</p>
-          <p>
-	    Recently I was adding specs to an API and found that
-	    there is no canonical proplist() type defined. (Thanks to
-	    Ryan Zezeski)</p>
-          <p>
-	    Own Id: OTP-9499</p>
-        </item>
-        <item>
-	    <p> XML files have been corrected. </p>
-          <p>
-	    Own Id: OTP-9550 Aux Id: OTP-9541 </p>
-        </item>
-        <item>
-          <p>
-	    If a test suite would start with a test case group
-	    defined without the init_per_group/2 and end_per_group/2
-	    function, init_per_suite/1 would not execute initially
-	    and logging of the test run would fail. This error has
-	    been fixed.</p>
-          <p>
-	    Own Id: OTP-9584</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    A new option, 'logopts', has been introduced, to make it
-	    possible to modify some aspects of the logging behaviour
-	    in Common Test (or Test Server). For example, whenever an
-	    io printout is made, test_server adds newline (\n) to the
-	    end of the output string. This may not always be a
-	    preferred action and can therefore be disabled by means
-	    of "ct_run ... -logopts no_nl" (or ct:run_test([...,
-	    {logopts,[no_nl]}])). A new framework callback function,
-	    get_logopts/0, has been introduced (see the ct_framework
-	    module for details).</p>
-          <p>
-	    Own Id: OTP-9372 Aux Id: OTP-9396 </p>
-        </item>
-        <item>
-          <p>
-	    A new option, 'logopts', has been introduced, to make it
-	    possible to modify some aspects of the logging behaviour
-	    in Common Test (or Test Server). For example, if the html
-	    version of the test suite source code should not be
-	    generated during the test run (and consequently be
-	    unavailable in the log file system), the feature may be
-	    disabled by means of "ct_run ... -logopts no_src" (or
-	    ct:run_test([..., {logopts,[no_src]}])). A new framework
-	    callback function, get_logopts/0, has been introduced
-	    (see the ct_framework module for details).</p>
-          <p>
-	    Own Id: OTP-9396 Aux Id: seq11869, OTP-9372 </p>
-        </item>
-        <item>
-          <p>
-	    It is now possible to use a tuple {M,F,A}, or a fun, as
-	    timetrap specification in the suite info function or test
-	    case info functions. The function must return a valid
-	    timeout value, as documented in the common_test man page
-	    and in the User's Guide.</p>
-          <p>
-	    Own Id: OTP-9501 Aux Id: seq11894 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.4.4</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    It was previously not possible to use timetrap value
-	    'infinity' with ct:timetrap/1. This has been fixed.</p>
-          <p>
-	    Own Id: OTP-9159</p>
-        </item>
-        <item>
-          <p>
-	    A bug that made it impossible to cancel the previous
-	    timetrap when calling ct:timetrap/1 has been corrected.</p>
-          <p>
-	    Own Id: OTP-9233 Aux Id: OTP-9159 </p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    When running tests with auto-compilation disabled, Common
-	    Test could only display the test suite source code on
-	    html format in the test case log if the source file was
-	    located in the same directory as the pre-compiled suite.
-	    This has been modified so that Common Test now tries to
-	    locate the source file by means of the test suite module
-	    info (Suite:module_info/1). As a result, a suite may now
-	    be compiled to a different output directory (e.g.
-	    $MYTEST/bin) than the source code directory (e.g.
-	    $MYTEST/src), without the source-code-to-html generation
-	    being affected.</p>
-          <p>
-	    Own Id: OTP-9138</p>
-        </item>
-        <item>
-          <p>
-	    It is now possible to return a tuple {fail,Reason} from
-	    init_per_testcase/2. The result is that the associated
-	    test case gets logged as failed without ever executing.</p>
-          <p>
-	    Own Id: OTP-9160 Aux Id: seq11502 </p>
-        </item>
-        <item>
-          <p>
-	    Added DragonflyBSD check in test_server configure.</p>
-          <p>
-	    Own Id: OTP-9249</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.4.3</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Updated the ts*.config files to contain information
-	    relevant to testing Erlang/OTP in an open source
-	    environment.</p>
-          <p>
-	    Own Id: OTP-9017</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Alpha release of Common Test Hooks (CTH). CTHs allow the
-	    users of common test to abtract out common behaviours
-	    from test suites in a much more elegant and flexible way
-	    than was possible before. Note that the addition of this
-	    feature may introduce minor changes in the undocumented
-	    behaviour of the interface inbetween common_test and
-	    test_server.</p>
-          <p>
-	    *** POTENTIAL INCOMPATIBILITY ***</p>
-          <p>
-	    Own Id: OTP-8851</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.4.2</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-	    <p>Miscellaneous updates</p>
-          <p>
-	    Own Id: OTP-8976</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.4.1</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Returning {return_group_result,failed} from end_per_group
-	    in a group that is part of a sequence, did not cause the
-	    proceeding cases (or groups) to get skipped. This has
-	    been fixed.</p>
-          <p>
-	    Own Id: OTP-8753 Aux Id: seq11644 </p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Common Test has been updated to handle start options and
-	    test specification terms for test case groups (and test
-	    cases in groups). Also, an option named 'label', has been
-	    added that associates the test run with a name that
-	    Common Test prints in the overview HTML logs.</p>
-          <p>
-	    Own Id: OTP-8725 Aux Id: OTP-8727 </p>
-        </item>
-        <item>
-          <p>
-	    It is now possible to skip all tests in a suite, or a
-	    group, by returning {fail,Reason} from the end_tc/5
-	    framework function for init_per_suite, or init_per_group.</p>
-          <p>
-	    Own Id: OTP-8805 Aux Id: seq11664 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.4</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    Returning {fail,Reason} from the framework end_tc
-	    function was not handled properly by Test Server for all
-	    test suite functions.</p>
-          <p>
-	    Own Id: OTP-8492 Aux Id: seq11502 </p>
-        </item>
-        <item>
-          <p>
-	    If the framework end_tc function would hang and get
-	    aborted by Test Server, there was no indication of
-	    failure in the logs. This has been fixed.</p>
-          <p>
-	    Own Id: OTP-8682 Aux Id: seq11504 </p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    It is now possible for the Test Server framework end_tc
-	    function to change the status of the test case from ok or
-	    auto-skipped to failed by returning {fail,Reason}.</p>
-          <p>
-	    Own Id: OTP-8495 Aux Id: seq11502 </p>
-        </item>
-        <item>
-          <p>
-	    Test Server will now call the end_per_testcase/2 function
-	    even if the test case has been terminated explicitly
-	    (with abort_current_testcase/1), or after a timetrap
-	    timeout. Under these circumstances the return value of
-	    end_per_testcase is completely ignored. Therefore the
-	    function will not be able to change the reason for test
-	    case termination by returning {fail,Reason}, nor will it
-	    be able to save data with {save_config,Data}.</p>
-          <p>
-	    Own Id: OTP-8500 Aux Id: seq11521 </p>
-        </item>
-        <item>
-          <p>
-	    Previously, a repeat property of a test case group
-	    specified the number of times the group should be
-	    repeated after the main test run. I.e. {repeat,N} would
-	    case the group to execute 1+N times. To be consistent
-	    with the behaviour of the run_test repeat option, this
-	    has been changed. N now specifies the absolute number of
-	    executions instead.</p>
-          <p>
-	    Own Id: OTP-8689 Aux Id: seq11502 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.3.6</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    The Test Server parse transform did not handle bit string
-	    comprehensions. This has been fixed.</p>
-          <p>
-	    Own Id: OTP-8458 Aux Id: OTP-8311 </p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    The tc_status value in the Config list for a test case
-	    that has failed because of a timetrap timeout, has
-	    changed from {tc_status,timeout} to
-	    {tc_status,timetrap_timeout}.</p>
-          <p>
-	    Own Id: OTP-8302</p>
-        </item>
-        <item>
-	    <p>The documentation is now possible to build in an open
-	    source environment after a number of bugs are fixed and
-	    some features are added in the documentation build
-	    process. </p>
-	    <p>- The arity calculation is updated.</p>
-	    <p>- The module prefix used in the function names for
-	    bif's are removed in the generated links so the links
-	    will look like
-	    "http://www.erlang.org/doc/man/erlang.html#append_element-2"
-	    instead of
-	    "http://www.erlang.org/doc/man/erlang.html#erlang:append_element-2".</p>
-	    <p>- Enhanced the menu positioning in the html
-	    documentation when a new page is loaded.</p>
-	    <p>- A number of corrections in the generation of man
-	    pages (thanks to Sergei Golovan)</p>
-	    <p>- The legal notice is taken from the xml book file so
-	    OTP's build process can be used for non OTP
-	    applications.</p>
-          <p>
-	    Own Id: OTP-8343</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.3.5</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    If the init_per_testcase/2 function fails, the test case
-	    now gets marked and counted as auto skipped, not user
-	    skipped (which would previously happen).</p>
-          <p>
-	    Own Id: OTP-8289</p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    The documentation is now built with open source tools
-	    (xsltproc and fop) that exists on most platforms. One
-	    visible change is that the frames are removed.</p>
-          <p>
-	    Own Id: OTP-8201</p>
-        </item>
-        <item>
-          <p>
-	    It is now possible to fail a test case from the
-	    end_per_testcase/2 function, by returning {fail,Reason}.</p>
-          <p>
-	    Own Id: OTP-8284</p>
-        </item>
-        <item>
-          <p>
-	    It is now possible to fail a test case by having the
-	    end_tc/3 framework function return {fail,Reason} for the
-	    test case.</p>
-          <p>
-	    Own Id: OTP-8285</p>
-        </item>
-        <item>
-          <p>
-	    The test_server framework API (e.g. the end_tc/3
-	    function) has been modified. See the test_server_ctrl
-	    documentation for details.</p>
-          <p>
-	    Own Id: OTP-8286 Aux Id: OTP-8285, OTP-8287 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.3.4</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    When running a suite starting with a test case group,
-	    Test Server crashed if init_per_suite/1 exited or
-	    returned skip. This has been fixed.</p>
-          <p>
-	    Own Id: OTP-8105 Aux Id: OTP-8089 </p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Various updates and fixes in Common Test and Test Server.</p>
-          <p>
-	    Own Id: OTP-8045 Aux Id: OTP-8089,OTP-8105,OTP-8163 </p>
-        </item>
-        <item>
-          <p>
-	    Errors in coverage data collection and analysis were
-	    difficult to detect. The logging has been improved so
-	    that more information about e.g. imported and missing
-	    modules is printed to the html log files.</p>
-          <p>
-	    Own Id: OTP-8163 Aux Id: seq11374 </p>
-        </item>
-        <item>
-          <p>
-	    The Common Test HTML overview pages have been improved.
-	    It is now possible to see if a test case has been skipped
-	    explicitly or because a configuration function has
-	    failed. Also, the history page (all_runs.html) now has
-	    scrolling text displaying the test names. The old format
-	    (showing names as a truncated string) can still be
-	    generated by means of the flag/option 'basic_html'.</p>
-          <p>
-	    Own Id: OTP-8177</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.3.2</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Various corrections and improvements of Common Test and
-	    Test Server.</p>
-          <p>
-	    Own Id: OTP-7981</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.3.1</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Minor updates and corrections.</p>
-          <p>
-	    Own Id: OTP-7897</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.3</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    The conf case in Test Server has been extended with
-	    properties that make it possible to execute test cases in
-	    parallel, in sequence and in shuffled order. It is now
-	    also possible to repeat test cases according to different
-	    criterias. The properties can be combined, making it
-	    possible to e.g. repeat a conf case a certain number of
-	    times and execute the test cases in different (random)
-	    order every time. The properties are specified in a list
-	    in the conf case definition: {conf, Properties, InitCase,
-	    TestCases, EndCase}. The available properties are:
-	    parallel, sequence, shuffle, repeat, repeat_until_all_ok,
-	    repeat_until_any_ok, repeat_until_any_fail,
-	    repeat_until_all_fail.</p>
-          <p>
-	    Own Id: OTP-7511 Aux Id: OTP-7839 </p>
-        </item>
-        <item>
-	    <p>The test server starts Cover on nodes of the same
-	    version as the test server itself only.</p>
-          <p>
-	    Own Id: OTP-7699</p>
-        </item>
-        <item>
-          <p>
-	    The Erlang mode for Emacs has been updated with new and
-	    modified skeletons for Common Test and TS. Syntax for
-	    test case groups in Common Test (and conf cases with
-	    properties in TS) has been added and a new minimal Common
-	    Test suite skeleton has been introduced.</p>
-          <p>
-	    Own Id: OTP-7856</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-<section><title>Test_Server 3.2.4.1</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-            The step functionality in Common Test (based on
-            interaction with Debugger) was broken. This has been
-            fixed, and some new step features have also been added.
-            Please see the Common Test User's Guide for details.</p>
-          <p>
-            Own Id: OTP-7800 Aux Id: seq11106 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.2.4</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Miscellaneous updates.</p>
-          <p>
-	    Own Id: OTP-7527</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.2.3</title>
-
-    <section><title>Fixed Bugs and Malfunctions</title>
-      <list>
-        <item>
-          <p>
-	    When a testcase terminated due to a timetrap, io sent to
-	    the group leader from framework:end_tc/3 (using
-	    ct:pal/2/3 or ct:log/2/3) would cause deadlock. This has
-	    been fixed.</p>
-          <p>
-	    Own Id: OTP-7447 Aux Id: seq11010 </p>
-        </item>
-      </list>
-    </section>
-
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Various updates and improvements, plus some minor bug
-	    fixes, have been implemented in Common Test and Test
-	    Server.</p>
-          <p>
-	    Own Id: OTP-7112</p>
-        </item>
-        <item>
-          <p>
-	    It is now possible, by means of the new function
-	    ct:abort_current_testcase/1 or
-	    test_server_ctrl:abort_current_testcase/1, to abort the
-	    currently executing test case.</p>
-          <p>
-	    Own Id: OTP-7518 Aux Id: OTP-7112 </p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.2.2</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-	    <p><c>erlang:system_info/1</c> now accepts the
-	    <c>logical_processors</c>, and <c>debug_compiled</c>
-	    arguments. For more info see the, <c>erlang(3)</c>
-	    documentation.</p> <p>The scale factor returned by
-	    <c>test_server:timetrap_scale_factor/0</c> is now also
-	    effected if the emulator uses a larger amount of
-	    scheduler threads than the amount of logical processors
-	    on the system. </p>
-          <p>
-	    Own Id: OTP-7175</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.2.1</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    When init_per_suite or end_per_suite terminated due to
-	    runtime failure, test_server failed to format the line
-	    number information properly and crashed. This error has
-	    now been fixed.</p>
-          <p>
-	    Own Id: OTP-7091</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-<section><title>Test_Server 3.2.0</title>
-
-    <section><title>Improvements and New Features</title>
-      <list>
-        <item>
-          <p>
-	    Test Server is a portable test server for automated
-	    application testing. The server can run test suites on
-	    local or remote targets and log progress and results to
-	    HTML pages. The main purpose of Test Server is to act as
-	    engine inside customized test tools. A callback interface
-	    for such framework applications is provided.</p>
-          <p>
-	    Own Id: OTP-6989</p>
-        </item>
-      </list>
-    </section>
-
-</section>
-
-</chapter>
-