diff options
author | Magnus Lång <[email protected]> | 2017-03-16 16:39:26 +0100 |
---|---|---|
committer | Magnus Lång <[email protected]> | 2017-03-16 20:49:42 +0100 |
commit | d1d26f4bf9da3cc5eab4e918df771d67fe9e6bb5 (patch) | |
tree | f1d261bb46fff0908a071de80646859e19cb5809 /lib | |
parent | cf047293ecf6ea108a1e5a412743bfb5fe66e26f (diff) | |
download | otp-d1d26f4bf9da3cc5eab4e918df771d67fe9e6bb5.tar.gz otp-d1d26f4bf9da3cc5eab4e918df771d67fe9e6bb5.tar.bz2 otp-d1d26f4bf9da3cc5eab4e918df771d67fe9e6bb5.zip |
hipe: Add range splitter range_split
hipe_range_split is a complex live range splitter, more sophisticated
thatn hipe_restore_reuse, but still targeted specifically at temporaries
forced onto stack by being live over call instructions.
hipe_range_split partitions the control flow graph at call instructions,
like hipe_regalloc_prepass. Splitting decisions are made on a per
partition and per temporary basis.
There are three different ways in which hipe_range_split may choose to
split a temporary in a program partition:
* Mode1: Spill the temp before calls, and restore it after them
* Mode2: Spill the temp after definitions, restore it after calls
* Mode3: Spill the temp after definitions, restore it before uses
To pick which of these should be used for each temp×partiton pair,
hipe_range_split uses a cost function. The cost is simply the sum of the
cost of all expected stack accesses, and the cost for an individual
stack access is based on the probability weight of the basic block that
it resides in. This biases the range splitter so that it attempts moving
stack accesses from a functions hot path to the cold path.
hipe_bb_weights is used to compute the probability weights.
mode3 is effectively the same as what hipe_restore_reuse does. Because
of this, hipe_restore_reuse reuses the analysis pass of
hipe_restore_reuse in order to compute the minimal needed set of spills
and restores. The reason mode3 was introduced to hipe_range_split rather
than simply composing it with hipe_restore_reuse (by running both) is
that such a composition resulted in poor register allocation results due
to insufficiently strong move coalescing in the register allocator.
The cost function heuristic has a couple of tuning knobs:
* {range_split_min_gain, Gain} (default: 1.1, range: [0.0, inf))
The minimum proportional improvement that the cost of all stack
accesses to a temp must display in order for that temp to be split.
* {range_split_mode1_fudge, Factor} (default: 1.1, range: [0.0, inf))
Costs for mode1 are multiplied by this factor in order to discourage
it when it provides marginal benefits. The justification is that
mode1 causes temps to be live for longest, thus leading to higher
register pressure.
* {range_split_weight_power, Factor} (default: 2, range: (0.0, inf))
Adjusts how much effect the basic block weights have on the cost of a
stack access. A stack access in a block with weight 1.0 has cost 1.0,
a stack access in a block with weight 0.01 has cost 1/Factor.
Additionally, the option range_split_weights chooses whether the basic
block weights are used at all.
In the case that the input is very big, hipe_range_split automatically
falls back to hipe_restore_reuse only in order to keep compile times
under control. Note that this is not only because of hipe_range_split
being slow, but also due to the resulting program being slow to register
allocate, and is not as partitionable by hipe_regalloc_prepass.
hipe_restore_reuse, on the other hand, does not affect the programs
partitionability.
The hipe_range_split pass is controlled by a new option ra_range_split.
ra_range_split is added to o2, and ra_restore_reuse is disabled in o2.
Diffstat (limited to 'lib')
-rw-r--r-- | lib/hipe/main/hipe.app.src | 1 | ||||
-rw-r--r-- | lib/hipe/main/hipe.erl | 17 | ||||
-rw-r--r-- | lib/hipe/regalloc/Makefile | 1 | ||||
-rw-r--r-- | lib/hipe/regalloc/hipe_range_split.erl | 1187 | ||||
-rw-r--r-- | lib/hipe/regalloc/hipe_regalloc_loop.erl | 18 | ||||
-rw-r--r-- | lib/hipe/regalloc/hipe_restore_reuse.erl | 15 |
6 files changed, 1232 insertions, 7 deletions
diff --git a/lib/hipe/main/hipe.app.src b/lib/hipe/main/hipe.app.src index 01499472f4..de0b255c01 100644 --- a/lib/hipe/main/hipe.app.src +++ b/lib/hipe/main/hipe.app.src @@ -148,6 +148,7 @@ hipe_ppc_specific_fp, hipe_ppc_subst, hipe_profile, + hipe_range_split, hipe_reg_worklists, hipe_regalloc_loop, hipe_regalloc_prepass, diff --git a/lib/hipe/main/hipe.erl b/lib/hipe/main/hipe.erl index f3e7c0879e..19b4e8bfe2 100644 --- a/lib/hipe/main/hipe.erl +++ b/lib/hipe/main/hipe.erl @@ -1230,6 +1230,13 @@ option_text(regalloc) -> " optimistic - another variant of a coalescing allocator"; option_text(remove_comments) -> "Strip comments from intermediate code"; +option_text(ra_range_split) -> + "Split live ranges of temporaries live over call instructions\n" + "before performing register allocation.\n" + "Heuristically tries to move stack accesses to the cold path of function.\n" + "This range splitter is more sophisticated than 'ra_restore_reuse', but has\n" + "a significantly larger impact on compile time.\n" + "Should only be used with move coalescing register allocators."; option_text(ra_restore_reuse) -> "Split live ranges of temporaries such that straight-line\n" "code will not need to contain multiple restores from the same stack\n" @@ -1376,7 +1383,12 @@ opt_keys() -> pp_rtl_linear, ra_partitioned, ra_prespill, + ra_range_split, ra_restore_reuse, + range_split_min_gain, + range_split_mode1_fudge, + range_split_weight_power, + range_split_weights, regalloc, remove_comments, rtl_ssa, @@ -1436,7 +1448,8 @@ o1_opts(TargetArch) -> o2_opts(TargetArch) -> Common = [icode_type, icode_call_elim, % icode_ssa_struct_reuse, - rtl_lcm | (o1_opts(TargetArch) -- [rtl_ssapre])], + ra_range_split, range_split_weights, % XXX: Having defaults here is ugly + rtl_lcm | (o1_opts(TargetArch) -- [rtl_ssapre, ra_restore_reuse])], case TargetArch of T when T =:= amd64 orelse T =:= ppc64 -> % 64-bit targets [icode_range | Common]; @@ -1484,7 +1497,9 @@ opt_negations() -> {no_pp_rtl_ssapre, pp_rtl_ssapre}, {no_ra_partitioned, ra_partitioned}, {no_ra_prespill, ra_prespill}, + {no_ra_range_split, ra_range_split}, {no_ra_restore_reuse, ra_restore_reuse}, + {no_range_split_weights, range_split_weights}, {no_remove_comments, remove_comments}, {no_rtl_ssa, rtl_ssa}, {no_rtl_ssa_const_prop, rtl_ssa_const_prop}, diff --git a/lib/hipe/regalloc/Makefile b/lib/hipe/regalloc/Makefile index 73ac232f51..81a92e5d35 100644 --- a/lib/hipe/regalloc/Makefile +++ b/lib/hipe/regalloc/Makefile @@ -50,6 +50,7 @@ MODULES = hipe_ig hipe_ig_moves hipe_moves \ hipe_optimistic_regalloc \ hipe_coalescing_regalloc \ hipe_graph_coloring_regalloc \ + hipe_range_split \ hipe_regalloc_loop \ hipe_regalloc_prepass \ hipe_restore_reuse \ diff --git a/lib/hipe/regalloc/hipe_range_split.erl b/lib/hipe/regalloc/hipe_range_split.erl new file mode 100644 index 0000000000..39b086d9f7 --- /dev/null +++ b/lib/hipe/regalloc/hipe_range_split.erl @@ -0,0 +1,1187 @@ +%% -*- erlang-indent-level: 2 -*- +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%%@doc +%% TEMPORARY LIVE RANGE SPLITTING PASS +%% +%% Live range splitting is useful to allow a register allocator to allocate a +%% temporary to register for a part of its lifetime, even if it cannot be for +%% the entirety. This improves register allocation quality, at the cost of +%% making the allocation problem more time and memory intensive to solve. +%% +%% Optimal allocation can be achieved if all temporaries are split at every +%% program point (between all instructions), but this makes register allocation +%% infeasably slow in practice. Instead, this module uses heuristics to choose +%% which temporaries should have their live ranges split, and at which points. +%% +%% The range splitter only considers temps which are live during a call +%% instruction, since they're known to be spilled. The control-flow graph is +%% partitioned at call instructions and splitting decisions are made separately +%% for each partition. The register copy of a temp (if any) gets a separate name +%% in each partition. +%% +%% There are three different ways the range splitter may choose to split a +%% temporary in a program partition: +%% +%% * Mode1: Spill the temp before calls, and restore it after them +%% * Mode2: Spill the temp after definitions, restore it after calls +%% * Mode3: Spill the temp after definitions, restore it before uses +%% +%% To pick which of these should be used for each temp×partiton pair, the range +%% splitter uses a cost function. The cost is simply the sum of the cost of all +%% expected stack accesses, and the cost for an individual stack access is based +%% on the probability weight of the basic block that it resides in. This biases +%% the range splitter so that it attempts moving stack accesses from a functions +%% hot path to the cold path. +%% +%% The heuristic has a couple of tuning knobs, adjusting its preference for +%% different spilling modes, aggressiveness, and how much influence the basic +%% block probability weights have. +%% +%% Edge case not handled: Call instructions directly defining a pseudo. In that +%% case, if that pseudo has been selected for mode2 spills, no spill is inserted +%% after the call. +-module(hipe_range_split). + +-export([split/5]). + +-compile(inline). + +%% -define(DO_ASSERT, 1). +%% -define(DEBUG, 1). +-include("../main/hipe.hrl"). + +%% Heuristic tuning constants +-define(DEFAULT_MIN_GAIN, 1.1). % option: range_split_min_gain +-define(DEFAULT_MODE1_FUDGE, 1.1). % option: range_split_mode1_fudge +-define(DEFAULT_WEIGHT_POWER, 2). % option: range_split_weight_power +-define(WEIGHT_CONST_FUN(Power), math:log(Power)/math:log(100)). +-define(WEIGHT_FUN(Wt, Const), math:pow(Wt, Const)). +-define(HEUR_MAX_TEMPS, 20000). + +-type target_cfg() :: any(). +-type target_instr() :: any(). +-type target_temp() :: any(). +-type liveness() :: any(). +-type target_module() :: module(). +-type target_context() :: any(). +-type target() :: {target_module(), target_context()}. +-type liveset() :: ordsets:ordset(temp()). +-type temp() :: non_neg_integer(). +-type label() :: non_neg_integer(). + +-spec split(target_cfg(), liveness(), target_module(), target_context(), + comp_options()) + -> target_cfg(). +split(TCFG0, Liveness, TargetMod, TargetContext, Options) -> + Target = {TargetMod, TargetContext}, + NoTemps = number_of_temporaries(TCFG0, Target), + if NoTemps > ?HEUR_MAX_TEMPS -> + ?debug_msg("~w: Too many temps (~w), falling back on restore_reuse.~n", + [?MODULE, NoTemps]), + hipe_restore_reuse:split(TCFG0, Liveness, TargetMod, TargetContext); + true -> + Wts = compute_weights(TCFG0, TargetMod, TargetContext, Options), + {CFG0, Temps} = convert(TCFG0, Target), + Avail = avail_analyse(TCFG0, Liveness, Target), + Defs = def_analyse(CFG0, TCFG0), + RDefs = rdef_analyse(CFG0), + PLive = plive_analyse(CFG0), + {CFG, DUCounts, Costs, DSets0} = + scan(CFG0, Liveness, PLive, Wts, Defs, RDefs, Avail, Target), + {DSets, _} = hipe_dsets:to_map(DSets0), + Renames = decide(DUCounts, Costs, Target, Options), + rewrite(CFG, TCFG0, Target, Liveness, PLive, Defs, Avail, DSets, Renames, + Temps) + end. + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Internal program representation +%% +%% Second pass: Convert cfg to internal representation + +-record(cfg, { + rpo_labels :: [label()], + bbs :: #{label() => bb()} + }). +-type cfg() :: #cfg{}. + +cfg_bb(L, #cfg{bbs=BBS}) -> maps:get(L, BBS). + +cfg_postorder(#cfg{rpo_labels=RPO}) -> lists:reverse(RPO). + +-record(bb, { + code :: [code_elem()], + %% If the last instruction of code defines all allocatable registers + has_call :: boolean(), + succ :: [label()] + }). +-type bb() :: #bb{}. +-type code_elem() :: instr() | mode2_spills() | mode3_restores(). + +bb_code(#bb{code=Code}) -> Code. +bb_has_call(#bb{has_call=HasCall}) -> HasCall. +bb_succ(#bb{succ=Succ}) -> Succ. + +bb_butlast(#bb{code=Code}) -> + bb_butlast_1(Code). + +bb_butlast_1([_Last]) -> []; +bb_butlast_1([I|Is]) -> [I|bb_butlast_1(Is)]. + +bb_last(#bb{code=Code}) -> lists:last(Code). + +-record(instr, { + i :: target_instr(), + def :: ordsets:ordset(temp()), + use :: ordsets:ordset(temp()) + }). +-type instr() :: #instr{}. + +-record(mode2_spills, { + temps :: ordsets:ordset(temp()) + }). +-type mode2_spills() :: #mode2_spills{}. + +-record(mode3_restores, { + temps :: ordsets:ordset(temp()) + }). +-type mode3_restores() :: #mode3_restores{}. + +-spec convert(target_cfg(), target()) -> {cfg(), temps()}. +convert(CFG, Target) -> + RPO = reverse_postorder(CFG, Target), + {BBsList, Temps} = convert_bbs(RPO, CFG, Target, #{}, []), + {#cfg{rpo_labels = RPO, + bbs = maps:from_list(BBsList)}, + Temps}. + +convert_bbs([], _CFG, _Target, Temps, Acc) -> {Acc, Temps}; +convert_bbs([L|Ls], CFG, Target, Temps0, Acc) -> + Succs = hipe_gen_cfg:succ(CFG, L), + TBB = bb(CFG, L, Target), + TCode = hipe_bb:code(TBB), + {Code, Last, Temps} = convert_code(TCode, Target, Temps0, []), + HasCall = defines_all_alloc(Last#instr.i, Target), + BB = #bb{code = Code, + has_call = HasCall, + succ = Succs}, + convert_bbs(Ls, CFG, Target, Temps, [{L,BB}|Acc]). + +convert_code([], _Target, Temps, [Last|_]=Acc) -> + {lists:reverse(Acc), Last, Temps}; +convert_code([TI|TIs], Target, Temps0, Acc) -> + {TDef, TUse} = def_use(TI, Target), + I = #instr{i = TI, + def = ordsets:from_list(reg_names(TDef, Target)), + use = ordsets:from_list(reg_names(TUse, Target))}, + Temps = add_temps(TUse, Target, add_temps(TDef, Target, Temps0)), + convert_code(TIs, Target, Temps, [I|Acc]). + +-type temps() :: #{temp() => target_temp()}. +add_temps([], _Target, Temps) -> Temps; +add_temps([T|Ts], Target, Temps) -> + add_temps(Ts, Target, Temps#{reg_nr(T, Target) => T}). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Fourth pass: P({DEF}) lattice fwd dataflow (for eliding stores at SPILL +%% splits) +-type defsi() :: #{label() => defseti() | {call, defseti(), defseti()}}. +-type defs() :: #{label() => defsetf()}. + +-spec def_analyse(cfg(), target_cfg()) -> defs(). +def_analyse(CFG = #cfg{rpo_labels = RPO}, TCFG) -> + Defs0 = def_init(CFG), + def_dataf(RPO, TCFG, Defs0). + +-spec def_init(cfg()) -> defsi(). +def_init(#cfg{bbs = BBs}) -> + maps:from_list( + [begin + {L, case HasCall of + false -> def_init_scan(bb_code(BB), defseti_new()); + true -> + {call, def_init_scan(bb_butlast(BB), defseti_new()), + defseti_from_ordset((bb_last(BB))#instr.def)} + end} + end || {L, BB = #bb{has_call=HasCall}} <- maps:to_list(BBs)]). + +def_init_scan([], Defset) -> Defset; +def_init_scan([#instr{def=Def}|Is], Defset0) -> + Defset = defseti_add_ordset(Def, Defset0), + def_init_scan(Is, Defset). + +-spec def_dataf([label()], target_cfg(), defsi()) -> defs(). +def_dataf(Labels, TCFG, Defs0) -> + case def_dataf_once(Labels, TCFG, Defs0, 0) of + {Defs, 0} -> + def_finalise(Defs); + {Defs, _Changed} -> + def_dataf(Labels, TCFG, Defs) + end. + +-spec def_finalise(defsi()) -> defs(). +def_finalise(Defs) -> + maps:from_list([{K, defseti_finalise(BL)} + || {K, {call, BL, _}} <- maps:to_list(Defs)]). + +-spec def_dataf_once([label()], target_cfg(), defsi(), non_neg_integer()) + -> {defsi(), non_neg_integer()}. +def_dataf_once([], _TCFG, Defs, Changed) -> {Defs, Changed}; +def_dataf_once([L|Ls], TCFG, Defs0, Changed0) -> + AddPreds = + fun(Defset1) -> + lists:foldl(fun(P, Defset2) -> + defseti_union(defout(P, Defs0), Defset2) + end, Defset1, hipe_gen_cfg:pred(TCFG, L)) + end, + Defset = + case Defset0 = maps:get(L, Defs0) of + {call, Butlast, Defout} -> {call, AddPreds(Butlast), Defout}; + _ -> AddPreds(Defset0) + end, + Changed = case Defset =:= Defset0 of + true -> Changed0; + false -> Changed0+1 + end, + def_dataf_once(Ls, TCFG, Defs0#{L := Defset}, Changed). + +-spec defout(label(), defsi()) -> defseti(). +defout(L, Defs) -> + case maps:get(L, Defs) of + {call, _DefButLast, Defout} -> Defout; + Defout -> Defout + end. + +-spec defbutlast(label(), defs()) -> defsetf(). +defbutlast(L, Defs) -> maps:get(L, Defs). + +-spec defseti_new() -> defseti(). +-spec defseti_union(defseti(), defseti()) -> defseti(). +-spec defseti_add_ordset(ordset:ordset(temp()), defseti()) -> defseti(). +-spec defseti_from_ordset(ordset:ordset(temp())) -> defseti(). +-spec defseti_finalise(defseti()) -> defsetf(). +-spec defsetf_member(temp(), defsetf()) -> boolean(). +-spec defsetf_intersect_ordset(ordsets:ordset(temp()), defsetf()) + -> ordsets:ordset(temp()). + +-type defseti() :: bitord(). +defseti_new() -> bitord_new(). +defseti_union(A, B) -> bitord_union(A, B). +defseti_add_ordset(OS, D) -> defseti_union(defseti_from_ordset(OS), D). +defseti_from_ordset(OS) -> bitord_from_ordset(OS). +defseti_finalise(D) -> bitarr_from_bitord(D). + +-type defsetf() :: bitarr(). +defsetf_member(E, D) -> bitarr_get(E, D). + +defsetf_intersect_ordset([], _D) -> []; +defsetf_intersect_ordset([E|Es], D) -> + case bitarr_get(E, D) of + true -> [E|defsetf_intersect_ordset(Es,D)]; + false -> defsetf_intersect_ordset(Es,D) + end. + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Fifth pass: P({DEF}) lattice reverse dataflow (for eliding stores at defines +%% in mode2) +-type rdefsi() :: #{label() => + {call, rdefseti(), [label()]} + | {nocall, rdefseti(), rdefseti(), [label()]}}. +-type rdefs() :: #{label() => {final, rdefsetf(), [label()]}}. + +-spec rdef_analyse(cfg()) -> rdefs(). +rdef_analyse(CFG = #cfg{rpo_labels=RPO}) -> + Defs0 = rdef_init(CFG), + PO = rdef_postorder(RPO, CFG, []), + rdef_dataf(PO, Defs0). + +%% Filter out 'call' labels, since they don't change +-spec rdef_postorder([label()], cfg(), [label()]) -> [label()]. +rdef_postorder([], _CFG, Acc) -> Acc; +rdef_postorder([L|Ls], CFG, Acc) -> + case bb_has_call(cfg_bb(L, CFG)) of + true -> rdef_postorder(Ls, CFG, Acc); + false -> rdef_postorder(Ls, CFG, [L|Acc]) + end. + +-spec rdef_init(cfg()) -> rdefsi(). +rdef_init(#cfg{bbs = BBs}) -> + maps:from_list( + [{L, case HasCall of + true -> + Defin = rdef_init_scan(bb_butlast(BB), rdefseti_empty()), + {call, Defin, Succs}; + false -> + Gen = rdef_init_scan(bb_code(BB), rdefseti_empty()), + {nocall, Gen, rdefseti_top(), Succs} + end} + || {L, BB = #bb{has_call=HasCall, succ=Succs}} <- maps:to_list(BBs)]). + +-spec rdef_init_scan([instr()], rdefseti()) -> rdefseti(). +rdef_init_scan([], Defset) -> Defset; +rdef_init_scan([#instr{def=Def}|Is], Defset0) -> + Defset = rdefseti_add_ordset(Def, Defset0), + rdef_init_scan(Is, Defset). + +-spec rdef_dataf([label()], rdefsi()) -> rdefs(). +rdef_dataf(Labels, Defs0) -> + case rdef_dataf_once(Labels, Defs0, 0) of + {Defs, 0} -> + rdef_finalise(Defs); + {Defs, _Changed} -> + rdef_dataf(Labels, Defs) + end. + +-spec rdef_finalise(rdefsi()) -> rdefs(). +rdef_finalise(Defs) -> + maps:map(fun(L, V) -> + Succs = rsuccs_val(V), + Defout0 = rdefout_intersect(L, Defs, rdefseti_top()), + {final, rdefset_finalise(Defout0), Succs} + end, Defs). + +-spec rdef_dataf_once([label()], rdefsi(), non_neg_integer()) + -> {rdefsi(), non_neg_integer()}. +rdef_dataf_once([], Defs, Changed) -> {Defs, Changed}; +rdef_dataf_once([L|Ls], Defs0, Changed0) -> + #{L := {nocall, Gen, Defin0, Succs}} = Defs0, + Defin = rdefseti_union(Gen, rdefout_intersect(L, Defs0, Defin0)), + Defset = {nocall, Gen, Defin, Succs}, + Changed = case Defin =:= Defin0 of + true -> Changed0; + false -> Changed0+1 + end, + rdef_dataf_once(Ls, Defs0#{L := Defset}, Changed). + +-spec rdefin(label(), rdefsi()) -> rdefseti(). +rdefin(L, Defs) -> rdefin_val(maps:get(L, Defs)). +rdefin_val({nocall, _Gen, Defin, _Succs}) -> Defin; +rdefin_val({call, Defin, _Succs}) -> Defin. + +-spec rsuccs(label(), rdefsi()) -> [label()]. +rsuccs(L, Defs) -> rsuccs_val(maps:get(L, Defs)). +rsuccs_val({nocall, _Gen, _Defin, Succs}) -> Succs; +rsuccs_val({call, _Defin, Succs}) -> Succs. + +-spec rdefout(label(), rdefs()) -> rdefsetf(). +rdefout(L, Defs) -> + #{L := {final, Defout, _Succs}} = Defs, + Defout. + +-spec rdefout_intersect(label(), rdefsi(), rdefseti()) -> rdefseti(). +rdefout_intersect(L, Defs, Init) -> + lists:foldl(fun(S, Acc) -> + rdefseti_intersect(rdefin(S, Defs), Acc) + end, Init, rsuccs(L, Defs)). + +-type rdefseti() :: bitord() | top. +rdefseti_top() -> top. +rdefseti_empty() -> bitord_new(). +-spec rdefseti_from_ordset(ordsets:ordset(temp())) -> rdefseti(). +rdefseti_from_ordset(OS) -> bitord_from_ordset(OS). + +-spec rdefseti_add_ordset(ordsets:ordset(temp()), rdefseti()) -> rdefseti(). +rdefseti_add_ordset(_, top) -> top; % Should never happen in rdef_dataf +rdefseti_add_ordset(OS, D) -> rdefseti_union(rdefseti_from_ordset(OS), D). + +-spec rdefseti_union(rdefseti(), rdefseti()) -> rdefseti(). +rdefseti_union(top, _) -> top; +rdefseti_union(_, top) -> top; +rdefseti_union(A, B) -> bitord_union(A, B). + +-spec rdefseti_intersect(rdefseti(), rdefseti()) -> rdefseti(). +rdefseti_intersect(top, D) -> D; +rdefseti_intersect(D, top) -> D; +rdefseti_intersect(A, B) -> bitord_intersect(A, B). + +-type rdefsetf() :: {arr, bitarr()} | top. +-spec rdefset_finalise(rdefseti()) -> rdefsetf(). +rdefset_finalise(top) -> top; +rdefset_finalise(Ord) -> {arr, bitarr_from_bitord(Ord)}. + +%% rdefsetf_top() -> top. +rdefsetf_empty() -> {arr, bitarr_new()}. + +-spec rdefsetf_add_ordset(ordset:ordset(temp()), rdefsetf()) -> rdefsetf(). +rdefsetf_add_ordset(_, top) -> top; +rdefsetf_add_ordset(OS, {arr, Arr}) -> + {arr, lists:foldl(fun bitarr_set/2, Arr, OS)}. + +-spec rdef_step(instr(), rdefsetf()) -> rdefsetf(). +rdef_step(#instr{def=Def}, Defset) -> + %% ?ASSERT(not defines_all_alloc(I, Target)), + rdefsetf_add_ordset(Def, Defset). + +-spec ordset_subtract_rdefsetf(ordsets:ordset(temp()), rdefsetf()) + -> ordsets:ordset(temp()). +ordset_subtract_rdefsetf(_, top) -> []; +ordset_subtract_rdefsetf(OS, {arr, Arr}) -> + %% Lazy implementation; could do better if OS can grow + lists:filter(fun(E) -> not bitarr_get(E, Arr) end, OS). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Integer sets represented as bit sets +%% +%% Two representations; bitord() and bitarr() +-define(LIMB_IX_BITS, 11). +-define(LIMB_BITS, (1 bsl ?LIMB_IX_BITS)). +-define(LIMB_IX(Index), (Index bsr ?LIMB_IX_BITS)). +-define(BIT_IX(Index), (Index band (?LIMB_BITS - 1))). +-define(BIT_MASK(Index), (1 bsl ?BIT_IX(Index))). + +%% bitord(): fast at union/2 and can be compared for equality with '=:=' +-type bitord() :: orddict:orddict(non_neg_integer(), 0..((1 bsl ?LIMB_BITS)-1)). + +-spec bitord_new() -> bitord(). +bitord_new() -> []. + +-spec bitord_union(bitord(), bitord()) -> bitord(). +bitord_union(Lhs, Rhs) -> + orddict:merge(fun(_, L, R) -> L bor R end, Lhs, Rhs). + +-spec bitord_intersect(bitord(), bitord()) -> bitord(). +bitord_intersect([], _) -> []; +bitord_intersect(_, []) -> []; +bitord_intersect([{K, L}|Ls], [{K, R}|Rs]) -> + [{K, L band R} | bitord_intersect(Ls, Rs)]; +bitord_intersect([{LK, _}|Ls], [{RK, _}|_]=Rs) when LK < RK -> + bitord_intersect(Ls, Rs); +bitord_intersect([{LK, _}|_]=Ls, [{RK, _}|Rs]) when LK > RK -> + bitord_intersect(Ls, Rs). + +-spec bitord_from_ordset(ordsets:ordset(non_neg_integer())) -> bitord(). +bitord_from_ordset([]) -> []; +bitord_from_ordset([B|Bs]) -> + bitord_from_ordset_1(Bs, ?LIMB_IX(B), ?BIT_MASK(B)). + +bitord_from_ordset_1([B|Bs], Key, Val) when Key =:= ?LIMB_IX(B) -> + bitord_from_ordset_1(Bs, Key, Val bor ?BIT_MASK(B)); +bitord_from_ordset_1([B|Bs], Key, Val) -> + [{Key,Val} | bitord_from_ordset_1(Bs, ?LIMB_IX(B), ?BIT_MASK(B))]; +bitord_from_ordset_1([], Key, Val) -> [{Key, Val}]. + +%% bitarr(): fast (enough) at get/2 +-type bitarr() :: array:array(0..((1 bsl ?LIMB_BITS)-1)). + +-spec bitarr_new() -> bitarr(). +bitarr_new() -> array:new({default, 0}). + +-spec bitarr_get(non_neg_integer(), bitarr()) -> boolean(). +bitarr_get(Index, Array) -> + Limb = array:get(?LIMB_IX(Index), Array), + 0 =/= (Limb band ?BIT_MASK(Index)). + +-spec bitarr_set(non_neg_integer(), bitarr()) -> bitarr(). +bitarr_set(Index, Array) -> + Limb0 = array:get(?LIMB_IX(Index), Array), + Limb = Limb0 bor ?BIT_MASK(Index), + array:set(?LIMB_IX(Index), Limb, Array). + +-spec bitarr_from_bitord(bitord()) -> bitarr(). +bitarr_from_bitord(Ord) -> + array:from_orddict(Ord, 0). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Sixth pass: Partition-local liveness analysis +%% +%% As temps are not spilled when exiting a partition in mode2, only +%% partition-local uses need to be considered when deciding which temps need +%% restoring at partition entry. + +-type plive() :: #{label() => + {call, liveset(), [label()]} + | {nocall, {liveset(), liveset()}, liveset(), [label()]}}. + +-spec plive_analyse(cfg()) -> plive(). +plive_analyse(CFG) -> + Defs0 = plive_init(CFG), + PO = cfg_postorder(CFG), + plive_dataf(PO, Defs0). + +-spec plive_init(cfg()) -> plive(). +plive_init(#cfg{bbs = BBs}) -> + maps:from_list( + [begin + {L, case HasCall of + true -> + {Gen, _} = plive_init_scan(bb_code(BB)), + {call, Gen, Succs}; + false -> + GenKill = plive_init_scan(bb_code(BB)), + {nocall, GenKill, liveset_empty(), Succs} + end} + end || {L, BB = #bb{has_call=HasCall, succ=Succs}} <- maps:to_list(BBs)]). + +-spec plive_init_scan([instr()]) -> {liveset(), liveset()}. +plive_init_scan([]) -> {liveset_empty(), liveset_empty()}; +plive_init_scan([#instr{def=InstrKill, use=InstrGen}|Is]) -> + {Gen0, Kill0} = plive_init_scan(Is), + Gen1 = liveset_subtract(Gen0, InstrKill), + Gen = liveset_union(Gen1, InstrGen), + Kill1 = liveset_union(Kill0, InstrKill), + Kill = liveset_subtract(Kill1, InstrGen), + {Gen, Kill}. + +-spec plive_dataf([label()], plive()) -> plive(). +plive_dataf(Labels, PLive0) -> + case plive_dataf_once(Labels, PLive0, 0) of + {PLive, 0} -> PLive; + {PLive, _Changed} -> + plive_dataf(Labels, PLive) + end. + +-spec plive_dataf_once([label()], plive(), non_neg_integer()) -> + {plive(), non_neg_integer()}. +plive_dataf_once([], PLive, Changed) -> {PLive, Changed}; +plive_dataf_once([L|Ls], PLive0, Changed0) -> + Liveset = + case Liveset0 = maps:get(L, PLive0) of + {call, Livein, Succs} -> + {call, Livein, Succs}; + {nocall, {Gen, Kill} = GenKill, _OldLivein, Succs} -> + Liveout = pliveout(L, PLive0), + Livein = liveset_union(Gen, liveset_subtract(Liveout, Kill)), + {nocall, GenKill, Livein, Succs} + end, + Changed = case Liveset =:= Liveset0 of + true -> Changed0; + false -> Changed0+1 + end, + plive_dataf_once(Ls, PLive0#{L := Liveset}, Changed). + +-spec pliveout(label(), plive()) -> liveset(). +pliveout(L, PLive) -> + liveset_union([plivein(S, PLive) || S <- psuccs(L, PLive)]). + +-spec psuccs(label(), plive()) -> [label()]. +psuccs(L, PLive) -> psuccs_val(maps:get(L, PLive)). +psuccs_val({call, _Livein, Succs}) -> Succs; +psuccs_val({nocall, _GenKill, _Livein, Succs}) -> Succs. + +-spec plivein(label(), plive()) -> liveset(). +plivein(L, PLive) -> plivein_val(maps:get(L, PLive)). +plivein_val({call, Livein, _Succs}) -> Livein; +plivein_val({nocall, _GenKill, Livein, _Succs}) -> Livein. + +liveset_empty() -> ordsets:new(). +liveset_subtract(A, B) -> ordsets:subtract(A, B). +liveset_union(A, B) -> ordsets:union(A, B). +liveset_union(LivesetList) -> ordsets:union(LivesetList). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Third pass: Compute dataflow analyses required for placing mode3 +%% spills/restores. +%% Reuse analysis implementation in hipe_restore_reuse. +%% XXX: hipe_restore_reuse has it's own "rdef"; we would like to reuse that one +%% too. +-type avail() :: hipe_restore_reuse:avail(). + +-spec avail_analyse(target_cfg(), liveness(), target()) -> avail(). +avail_analyse(CFG, Liveness, Target) -> + hipe_restore_reuse:analyse(CFG, Liveness, Target). + +-spec mode3_split_in_block(label(), avail()) -> ordsets:ordset(temp()). +mode3_split_in_block(L, Avail) -> + hipe_restore_reuse:split_in_block(L, Avail). + +-spec mode3_block_renameset(label(), avail()) -> ordsets:ordset(temp()). +mode3_block_renameset(L, Avail) -> + hipe_restore_reuse:renamed_in_block(L, Avail). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Seventh pass +%% +%% Compute program space partitioning, collect information required by the +%% heuristic. +-type part_key() :: label(). +-type part_dsets() :: hipe_dsets:dsets(part_key()). +-type part_dsets_map() :: #{part_key() => part_key()}. +-type ducounts() :: #{part_key() => ducount()}. + +-spec scan(cfg(), liveness(), plive(), weights(), defs(), rdefs(), avail(), + target()) -> {cfg(), ducounts(), costs(), part_dsets()}. +scan(CFG0, Liveness, PLive, Weights, Defs, RDefs, Avail, Target) -> + #cfg{rpo_labels = Labels, bbs = BBs0} = CFG0, + CFG = CFG0#cfg{bbs=#{}}, % kill reference + DSets0 = hipe_dsets:new(Labels), + Costs0 = costs_new(), + {BBs, DUCounts0, Costs1, DSets1} = + scan_bbs(maps:to_list(BBs0), Liveness, PLive, Weights, Defs, RDefs, Avail, + Target, #{}, Costs0, DSets0, []), + {RLList, DSets2} = hipe_dsets:to_rllist(DSets1), + {Costs, DSets} = costs_map_roots(DSets2, Costs1), + DUCounts = collect_ducounts(RLList, DUCounts0, #{}), + {CFG#cfg{bbs=maps:from_list(BBs)}, DUCounts, Costs, DSets}. + +-spec collect_ducounts([{label(), [label()]}], ducounts(), ducounts()) + -> ducounts(). +collect_ducounts([], _, Acc) -> Acc; +collect_ducounts([{R,Ls}|RLs], DUCounts, Acc) -> + DUCount = lists:foldl( + fun(Key, FAcc) -> + ducount_merge(maps:get(Key, DUCounts, ducount_new()), FAcc) + end, ducount_new(), Ls), + collect_ducounts(RLs, DUCounts, Acc#{R => DUCount}). + +-spec scan_bbs([{label(), bb()}], liveness(), plive(), weights(), defs(), + rdefs(), avail(), target(), ducounts(), costs(), part_dsets(), + [{label(), bb()}]) + -> {[{label(), bb()}], ducounts(), costs(), part_dsets()}. +scan_bbs([], _Liveness, _PLive, _Weights, _Defs, _RDefs, _Avail, _Target, + DUCounts, Costs, DSets, Acc) -> + {Acc, DUCounts, Costs, DSets}; +scan_bbs([{L,BB}|BBs], Liveness, PLive, Weights, Defs, RDefs, Avail, Target, + DUCounts0, Costs0, DSets0, Acc) -> + Wt = weight(L, Weights), + {DSets, Costs5, EntryCode, ExitCode, RDefout, Liveout} = + case bb_has_call(BB) of + false -> + DSets1 = lists:foldl(fun(S, DS) -> hipe_dsets:union(L, S, DS) end, + DSets0, bb_succ(BB)), + {DSets1, Costs0, bb_code(BB), [], rdefout(L, RDefs), + liveout(Liveness, L, Target)}; + true -> + LastI = #instr{def=LastDef} = bb_last(BB), + LiveBefore = ordsets:subtract(liveout(Liveness, L, Target), LastDef), + %% We can omit the spill of a temp that has not been defined since the + %% last time it was spilled + SpillSet = defsetf_intersect_ordset(LiveBefore, defbutlast(L, Defs)), + Costs1 = costs_insert(exit, L, Wt, SpillSet, Costs0), + Costs4 = lists:foldl(fun({S, BranchWt}, Costs2) -> + SLivein = livein(Liveness, S, Target), + SPLivein = plivein(S, PLive), + SWt = weight_scaled(L, BranchWt, Weights), + Costs3 = costs_insert(entry1, S, SWt, SLivein, Costs2), + costs_insert(entry2, S, SWt, SPLivein, Costs3) + end, Costs1, branch_preds(LastI#instr.i, Target)), + {DSets0, Costs4, bb_butlast(BB), [LastI], rdefsetf_empty(), LiveBefore} + end, + Mode3Splits = mode3_split_in_block(L, Avail), + {RevEntryCode, Restored} = scan_bb_fwd(EntryCode, Mode3Splits, [], []), + {Code, DUCount, Mode2Spills} = + scan_bb(RevEntryCode, Wt, RDefout, Liveout, ducount_new(), [], ExitCode), + DUCounts = DUCounts0#{L => DUCount}, + M2SpillSet = ordsets:from_list(Mode2Spills), + Costs6 = costs_insert(spill, L, Wt, M2SpillSet, Costs5), + Mode3Renames = mode3_block_renameset(L, Avail), + Costs7 = costs_insert(restore, L, Wt, ordsets:intersection(M2SpillSet, Mode3Renames), Costs6), + Costs8 = costs_insert(restore, L, Wt, ordsets:from_list(Restored), Costs7), + Costs = add_unsplit_mode3_costs(DUCount, Mode3Renames, L, Costs8), + scan_bbs(BBs, Liveness, PLive, Weights, Defs, RDefs, Avail, Target, DUCounts, + Costs, DSets, [{L,BB#bb{code=Code}}|Acc]). + +-spec add_unsplit_mode3_costs(ducount(), ordsets:ordset(temp()), label(), costs()) + -> costs(). +add_unsplit_mode3_costs(DUCount, Mode3Renames, L, Costs) -> + Unsplit = orddict_without_ordset(Mode3Renames, + orddict:from_list(ducount_to_list(DUCount))), + add_unsplit_mode3_costs_1(Unsplit, L, Costs). + +-spec add_unsplit_mode3_costs_1([{temp(),float()}], label(), costs()) + -> costs(). +add_unsplit_mode3_costs_1([], _L, Costs) -> Costs; +add_unsplit_mode3_costs_1([{T,C}|Cs], L, Costs) -> + add_unsplit_mode3_costs_1(Cs, L, costs_insert(restore, L, C, [T], Costs)). + +%% @doc Returns a new orddict without keys in Set and their associated values. +-spec orddict_without_ordset(ordsets:ordset(K), orddict:orddict(K, V)) + -> orddict:orddict(K, V). +orddict_without_ordset([S|Ss], [{K,_}|_]=Dict) when S < K -> + orddict_without_ordset(Ss, Dict); +orddict_without_ordset([S|_]=Set, [D={K,_}|Ds]) when S > K -> + [D|orddict_without_ordset(Set, Ds)]; +orddict_without_ordset([_S|Ss], [{_K,_}|Ds]) -> % _S == _K + orddict_without_ordset(Ss, Ds); +orddict_without_ordset(_, []) -> []; +orddict_without_ordset([], Dict) -> Dict. + +%% Scans the code forward, collecting and inserting mode3 restores +-spec scan_bb_fwd([instr()], ordsets:ordset(temp()), ordsets:ordset(temp()), + [code_elem()]) + -> {[code_elem()], ordsets:ordset(temp())}. +scan_bb_fwd([], [], Restored, Acc) -> {Acc, Restored}; +scan_bb_fwd([I|Is], SplitHere0, Restored0, Acc0) -> + #instr{def=Def, use=Use} = I, + {ToRestore, SplitHere1} = + lists:partition(fun(R) -> lists:member(R, Use) end, SplitHere0), + SplitHere = lists:filter(fun(R) -> not lists:member(R, Def) end, SplitHere1), + Acc = + case ToRestore of + [] -> [I | Acc0]; + _ -> [I, #mode3_restores{temps=ToRestore} | Acc0] + end, + scan_bb_fwd(Is, SplitHere, ToRestore ++ Restored0, Acc). + +%% Scans the code backwards, collecting def/use counts and mode2 spills +-spec scan_bb([code_elem()], float(), rdefsetf(), liveset(), ducount(), + [temp()], [code_elem()]) + -> {[code_elem()], ducount(), [temp()]}. +scan_bb([], _Wt, _RDefout, _Liveout, DUCount, Spills, Acc) -> + {Acc, DUCount, Spills}; +scan_bb([I=#mode3_restores{}|Is], Wt, RDefout, Liveout, DUCount, Spills, Acc) -> + scan_bb(Is, Wt, RDefout, Liveout, DUCount, Spills, [I|Acc]); +scan_bb([I|Is], Wt, RDefout, Liveout, DUCount0, Spills0, Acc0) -> + #instr{def=Def,use=Use} = I, + DUCount = ducount_add(Use, Wt, ducount_add(Def, Wt, DUCount0)), + Livein = liveness_step(I, Liveout), + RDefin = rdef_step(I, RDefout), + %% The temps that would be spilled after I in mode 2 + NewSpills = ordset_subtract_rdefsetf( + ordsets:intersection(Def, Liveout), + RDefout), + ?ASSERT(NewSpills =:= (NewSpills -- Spills0)), + Spills = NewSpills ++ Spills0, + Acc1 = case NewSpills of + [] -> Acc0; + _ -> [#mode2_spills{temps=NewSpills}|Acc0] + end, + scan_bb(Is, Wt, RDefin, Livein, DUCount, Spills, [I|Acc1]). + +-spec liveness_step(instr(), liveset()) -> liveset(). +liveness_step(#instr{def=Def, use=Use}, Liveout) -> + ordsets:union(Use, ordsets:subtract(Liveout, Def)). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% First pass: compute basic-block weighting + +-type weights() :: no_bb_weights + | {hipe_bb_weights:bb_weights(), float()}. + +-spec weight(label(), weights()) -> float(). +weight(L, Weights) -> weight_scaled(L, 1.0, Weights). + +-spec compute_weights(target_cfg(), target_module(), target_context(), + comp_options()) -> weights(). +compute_weights(CFG, TargetMod, TargetContext, Options) -> + case proplists:get_bool(range_split_weights, Options) of + false -> no_bb_weights; + true -> + {hipe_bb_weights:compute(CFG, TargetMod, TargetContext), + ?WEIGHT_CONST_FUN(proplists:get_value(range_split_weight_power, + Options, ?DEFAULT_WEIGHT_POWER))} + end. + +-spec weight_scaled(label(), float(), weights()) -> float(). +weight_scaled(_L, _Scale, no_bb_weights) -> 1.0; +weight_scaled(L, Scale, {Weights, Const}) -> + Wt0 = hipe_bb_weights:weight(L, Weights) * Scale, + Wt = erlang:min(erlang:max(Wt0, 0.0000000000000000001), 10000.0), + ?WEIGHT_FUN(Wt, Const). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Heuristic splitting decision. +%% +%% Decide which temps to split, in which parts, and pick new names for them. +-type spill_mode() :: mode1 % Spill temps at partition exits + | mode2 % Spill temps at definitions + | mode3.% Spill temps at definitions, restore temps at uses +-type ren() :: #{temp() => {spill_mode(), temp()}}. +-type renames() :: #{label() => ren()}. + +-record(heur_par, { + mode1_fudge :: float(), + min_gain :: float() + }). +-type heur_par() :: #heur_par{}. + +-spec decide(ducounts(), costs(), target(), comp_options()) -> renames(). +decide(DUCounts, Costs, Target, Options) -> + Par = #heur_par{ + mode1_fudge = proplists:get_value(range_split_mode1_fudge, Options, + ?DEFAULT_MODE1_FUDGE), + min_gain = proplists:get_value(range_split_min_gain, Options, + ?DEFAULT_MIN_GAIN)}, + decide_parts(maps:to_list(DUCounts), Costs, Target, Par, #{}). + +-spec decide_parts([{part_key(), ducount()}], costs(), target(), + heur_par(), renames()) + -> renames(). +decide_parts([], _Costs, _Target, _Par, Acc) -> Acc; +decide_parts([{Part,DUCount}|Ps], Costs, Target, Par, Acc) -> + Spills = decide_temps(ducount_to_list(DUCount), Part, Costs, Target, Par, + #{}), + decide_parts(Ps, Costs, Target, Par, Acc#{Part => Spills}). + +-spec decide_temps([{temp(), float()}], part_key(), costs(), target(), + heur_par(), ren()) + -> ren(). +decide_temps([], _Part, _Costs, _Target, _Par, Acc) -> Acc; +decide_temps([{Temp, SpillGain}|Ts], Part, Costs, Target, Par, Acc0) -> + SpillCost1 = costs_query(Temp, entry1, Part, Costs) + + costs_query(Temp, exit, Part, Costs), + SpillCost2 = costs_query(Temp, entry2, Part, Costs) + + costs_query(Temp, spill, Part, Costs), + SpillCost3 = costs_query(Temp, restore, Part, Costs), + Acc = + %% SpillCost1 =:= 0.0 usually means the temp is local to the partition; + %% hence no need to split it + case (SpillCost1 =/= 0.0) %% maps:is_key(Temp, S) + andalso (not is_precoloured(Temp, Target)) + andalso ((Par#heur_par.min_gain*SpillCost1 < SpillGain) + orelse (Par#heur_par.min_gain*SpillCost2 < SpillGain) + orelse (Par#heur_par.min_gain*SpillCost3 < SpillGain)) + of + false -> Acc0; + true -> + Mode = + if Par#heur_par.mode1_fudge*SpillCost1 < SpillCost2, + Par#heur_par.mode1_fudge*SpillCost1 < SpillCost3 -> + mode1; + SpillCost2 < SpillCost3 -> + mode2; + true -> + mode3 + end, + Acc0#{Temp => {Mode, new_reg_nr(Target)}} + end, + decide_temps(Ts, Part, Costs, Target, Par, Acc). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Eighth pass: Rewrite program performing range splitting. + +-spec rewrite(cfg(), target_cfg(), target(), liveness(), plive(), defs(), + avail(), part_dsets_map(), renames(), temps()) + -> target_cfg(). +rewrite(#cfg{bbs=BBs}, TCFG, Target, Liveness, PLive, Defs, Avail, DSets, + Renames, Temps) -> + rewrite_bbs(maps:to_list(BBs), Target, Liveness, PLive, Defs, Avail, DSets, + Renames, Temps, TCFG). + +-spec rewrite_bbs([{label(), bb()}], target(), liveness(), plive(), defs(), + avail(), part_dsets_map(), renames(), temps(), target_cfg()) + -> target_cfg(). +rewrite_bbs([], _Target, _Liveness, _PLive, _Defs, _Avail, _DSets, _Renames, + _Temps, TCFG) -> + TCFG; +rewrite_bbs([{L,BB}|BBs], Target, Liveness, PLive, Defs, Avail, DSets, Renames, + Temps, TCFG0) -> + Code0Rev = lists:reverse(bb_code(BB)), + EntryRen = maps:get(maps:get(L,DSets), Renames), + M3Ren = mode3_block_renameset(L, Avail), + SubstFun = rewrite_subst_fun(Target, EntryRen, M3Ren), + Fun = fun(I) -> subst_temps(SubstFun, I, Target) end, + {Code, TCFG} = + case bb_has_call(BB) of + false -> + Code1 = rewrite_instrs(Code0Rev, Fun, EntryRen, M3Ren, Temps, Target, + []), + {Code1, TCFG0}; + true -> + CallI0 = hd(Code0Rev), + Succ = bb_succ(BB), + {CallTI, TCFG1} = inject_restores(Succ, Target, Liveness, PLive, DSets, + Renames, Temps, CallI0#instr.i, TCFG0), + Liveout1 = liveness_step(CallI0, liveout(Liveness, L, Target)), + Defout = defbutlast(L, Defs), + SpillMap = mk_spillmap(EntryRen, Liveout1, Defout, Temps, Target), + Code1 = rewrite_instrs(tl(Code0Rev), Fun, EntryRen, M3Ren, Temps, + Target, []), + Code2 = lift_spills(lists:reverse(Code1), Target, SpillMap, [CallTI]), + {Code2, TCFG1} + end, + TBB = hipe_bb:code_update(bb(TCFG, L, Target), Code), + rewrite_bbs(BBs, Target, Liveness, PLive, Defs, Avail, DSets, Renames, Temps, + update_bb(TCFG, L, TBB, Target)). + +-spec rewrite_instrs([code_elem()], rewrite_fun(), ren(), + ordsets:ordset(temp()), temps(), target(), + [target_instr()]) + -> [target_instr()]. +rewrite_instrs([], _Fun, _Ren, _M3Ren, _Temps, _Target, Acc) -> Acc; +rewrite_instrs([I|Is], Fun, Ren, M3Ren, Temps, Target, Acc0) -> + Acc = + case I of + #instr{i=TI} -> [Fun(TI)|Acc0]; + #mode2_spills{temps=Mode2Spills} -> + add_mode2_spills(Mode2Spills, Target, Ren, M3Ren, Temps, Acc0); + #mode3_restores{temps=Mode3Restores} -> + add_mode3_restores(Mode3Restores, Target, Ren, Temps, Acc0) + end, + rewrite_instrs(Is, Fun, Ren, M3Ren, Temps, Target, Acc). + +-spec add_mode2_spills(ordsets:ordset(temp()), target(), ren(), + ordsets:ordset(temp()), temps(), [target_instr()]) + -> [target_instr()]. +add_mode2_spills([], _Target, _Ren, _M3Ren, _Temps, Acc) -> Acc; +add_mode2_spills([R|Rs], Target, Ren, M3Ren, Temps, Acc0) -> + Acc = + case Ren of + #{R := {Mode, NewName}} when Mode =:= mode2; Mode =:= mode3 -> + case Mode =/= mode3 orelse lists:member(R, M3Ren) of + false -> Acc0; + true -> + #{R := T} = Temps, + SpillInstr = mk_move(update_reg_nr(NewName, T, Target), T, Target), + [SpillInstr|Acc0] + end; + #{} -> + Acc0 + end, + add_mode2_spills(Rs, Target, Ren, M3Ren, Temps, Acc). + +-spec add_mode3_restores(ordsets:ordset(temp()), target(), ren(), temps(), + [target_instr()]) + -> [target_instr()]. +add_mode3_restores([], _Target, _Ren, _Temps, Acc) -> Acc; +add_mode3_restores([R|Rs], Target, Ren, Temps, Acc) -> + case Ren of + #{R := {mode3, NewName}} -> + #{R := T} = Temps, + RestoreInstr = mk_move(T, update_reg_nr(NewName, T, Target), Target), + add_mode3_restores(Rs, Target, Ren, Temps, [RestoreInstr|Acc]); + #{} -> + add_mode3_restores(Rs, Target, Ren, Temps, Acc) + end. + +-type rewrite_fun() :: fun((target_instr()) -> target_instr()). +-type subst_fun() :: fun((target_temp()) -> target_temp()). +-spec rewrite_subst_fun(target(), ren(), ordsets:ordset(temp())) -> subst_fun(). +rewrite_subst_fun(Target, Ren, M3Ren) -> + fun(Temp) -> + Reg = reg_nr(Temp, Target), + case Ren of + #{Reg := {Mode, NewName}} -> + case Mode =/= mode3 orelse lists:member(Reg, M3Ren) of + false -> Temp; + true -> update_reg_nr(NewName, Temp, Target) + end; + #{} -> Temp + end + end. + +-type spillmap() :: [{temp(), target_instr()}]. +-spec mk_spillmap(ren(), liveset(), defsetf(), temps(), target()) + -> spillmap(). +mk_spillmap(Ren, Livein, Defout, Temps, Target) -> + [begin + Temp = maps:get(Reg, Temps), + {NewName, mk_move(update_reg_nr(NewName, Temp, Target), Temp, Target)} + end || {Reg, {mode1, NewName}} <- maps:to_list(Ren), + lists:member(Reg, Livein), defsetf_member(Reg, Defout)]. + +-spec mk_restores(ren(), liveset(), liveset(), temps(), target()) + -> [target_instr()]. +mk_restores(Ren, Livein, PLivein, Temps, Target) -> + [begin + Temp = maps:get(Reg, Temps), + mk_move(Temp, update_reg_nr(NewName, Temp, Target), Target) + end || {Reg, {Mode, NewName}} <- maps:to_list(Ren), + ( (Mode =:= mode1 andalso lists:member(Reg, Livein )) + orelse (Mode =:= mode2 andalso lists:member(Reg, PLivein)))]. + +-spec inject_restores([label()], target(), liveness(), plive(), + part_dsets_map(), renames(), temps(), target_instr(), + target_cfg()) + -> {target_instr(), target_cfg()}. +inject_restores([], _Target, _Liveness, _PLive, _DSets, _Renames, _Temps, CFTI, + TCFG) -> + {CFTI, TCFG}; +inject_restores([L|Ls], Target, Liveness, PLive, DSets, Renames, Temps, CFTI0, + TCFG0) -> + Ren = maps:get(maps:get(L,DSets), Renames), + Livein = livein(Liveness, L, Target), + PLivein = plivein(L, PLive), + {CFTI, TCFG} = + case mk_restores(Ren, Livein, PLivein, Temps, Target) of + [] -> {CFTI0, TCFG0}; % optimisation + Restores -> + RestBBLbl = new_label(Target), + Code = Restores ++ [mk_goto(L, Target)], + CFTI1 = redirect_jmp(CFTI0, L, RestBBLbl, Target), + TCFG1 = update_bb(TCFG0, RestBBLbl, hipe_bb:mk_bb(Code), Target), + {CFTI1, TCFG1} + end, + inject_restores(Ls, Target, Liveness, PLive, DSets, Renames, Temps, CFTI, + TCFG). + +%% Heuristic. Move spills up until we meet the edge of the BB or a definition of +%% that temp. +-spec lift_spills([target_instr()], target(), spillmap(), [target_instr()]) + -> [target_instr()]. +lift_spills([], _Target, SpillMap, Acc) -> + [SpillI || {_, SpillI} <- SpillMap] ++ Acc; +lift_spills([I|Is], Target, SpillMap0, Acc) -> + Def = reg_defines(I, Target), + {Spills0, SpillMap} = + lists:partition(fun({Reg,_}) -> lists:member(Reg, Def) end, SpillMap0), + Spills = [SpillI || {_, SpillI} <- Spills0], + lift_spills(Is, Target, SpillMap, [I|Spills ++ Acc]). + +reg_defines(I, Target) -> + reg_names(defines(I,Target), Target). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Costs ADT +%% +%% Keeps track of cumulative cost of spilling temps in particular partitions +%% using particular spill modes. +-type cost_map() :: #{[part_key()|temp()] => float()}. +-type cost_key() :: entry1 | entry2 | exit | spill | restore. +-record(costs, {entry1 = #{} :: cost_map() + ,entry2 = #{} :: cost_map() + ,exit = #{} :: cost_map() + ,spill = #{} :: cost_map() + ,restore = #{} :: cost_map() + }). +-type costs() :: #costs{}. + +-spec costs_new() -> costs(). +costs_new() -> #costs{}. + +-spec costs_insert(cost_key(), part_key(), float(), liveset(), costs()) + -> costs(). +costs_insert(entry1, A, Weight, Liveset, Costs=#costs{entry1=Entry1}) -> + Costs#costs{entry1=costs_insert_1(A, Weight, Liveset, Entry1)}; +costs_insert(entry2, A, Weight, Liveset, Costs=#costs{entry2=Entry2}) -> + Costs#costs{entry2=costs_insert_1(A, Weight, Liveset, Entry2)}; +costs_insert(exit, A, Weight, Liveset, Costs=#costs{exit=Exit}) -> + Costs#costs{exit=costs_insert_1(A, Weight, Liveset, Exit)}; +costs_insert(spill, A, Weight, Liveset, Costs=#costs{spill=Spill}) -> + Costs#costs{spill=costs_insert_1(A, Weight, Liveset, Spill)}; +costs_insert(restore, A, Weight, Liveset, Costs=#costs{restore=Restore}) -> + Costs#costs{restore=costs_insert_1(A, Weight, Liveset, Restore)}. + +costs_insert_1(A, Weight, Liveset, CostMap0) when is_float(Weight) -> + lists:foldl(fun(Live, CostMap1) -> + map_update_counter([A|Live], Weight, CostMap1) + end, CostMap0, Liveset). + +-spec costs_map_roots(part_dsets(), costs()) -> {costs(), part_dsets()}. +costs_map_roots(DSets0, Costs) -> + {Entry1, DSets1} = costs_map_roots_1(DSets0, Costs#costs.entry1), + {Entry2, DSets2} = costs_map_roots_1(DSets1, Costs#costs.entry2), + {Exit, DSets3} = costs_map_roots_1(DSets2, Costs#costs.exit), + {Spill, DSets4} = costs_map_roots_1(DSets3, Costs#costs.spill), + {Restore, DSets} = costs_map_roots_1(DSets4, Costs#costs.restore), + {#costs{entry1=Entry1,entry2=Entry2,exit=Exit,spill=Spill,restore=Restore}, + DSets}. + +costs_map_roots_1(DSets0, CostMap) -> + {NewEs, DSets} = lists:mapfoldl(fun({[A|T], Wt}, DSets1) -> + {AR, DSets2} = hipe_dsets:find(A, DSets1), + {{[AR|T], Wt}, DSets2} + end, DSets0, maps:to_list(CostMap)), + {maps_from_list_merge(NewEs, fun erlang:'+'/2, #{}), DSets}. + +maps_from_list_merge([], _MF, Acc) -> Acc; +maps_from_list_merge([{K,V}|Ps], MF, Acc) -> + maps_from_list_merge(Ps, MF, case Acc of + #{K := OV} -> Acc#{K := MF(V, OV)}; + #{} -> Acc#{K => V} + end). + +-spec costs_query(temp(), cost_key(), part_key(), costs()) -> float(). +costs_query(Temp, entry1, Part, #costs{entry1=Entry1}) -> + costs_query_1(Temp, Part, Entry1); +costs_query(Temp, entry2, Part, #costs{entry2=Entry2}) -> + costs_query_1(Temp, Part, Entry2); +costs_query(Temp, exit, Part, #costs{exit=Exit}) -> + costs_query_1(Temp, Part, Exit); +costs_query(Temp, spill, Part, #costs{spill=Spill}) -> + costs_query_1(Temp, Part, Spill); +costs_query(Temp, restore, Part, #costs{restore=Restore}) -> + costs_query_1(Temp, Part, Restore). + +costs_query_1(Temp, Part, CostMap) -> + Key = [Part|Temp], + case CostMap of + #{Key := Wt} -> Wt; + #{} -> 0.0 + end. + +-spec map_update_counter(Key, number(), #{Key => number(), OK => OV}) + -> #{Key := number(), OK => OV}. +map_update_counter(Key, Incr, Map) -> + case Map of + #{Key := Orig} -> Map#{Key := Orig + Incr}; + #{} -> Map#{Key => Incr} + end. + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Def and use counting ADT +-type ducount() :: #{temp() => float()}. + +-spec ducount_new() -> ducount(). +ducount_new() -> #{}. + +-spec ducount_add([temp()], float(), ducount()) -> ducount(). +ducount_add([], _Weight, DUCount) -> DUCount; +ducount_add([T|Ts], Weight, DUCount0) -> + DUCount = + case DUCount0 of + #{T := Count} -> DUCount0#{T := Count + Weight}; + #{} -> DUCount0#{T => Weight} + end, + ducount_add(Ts, Weight, DUCount). + +ducount_to_list(DUCount) -> maps:to_list(DUCount). + +-spec ducount_merge(ducount(), ducount()) -> ducount(). +ducount_merge(DCA, DCB) when map_size(DCA) < map_size(DCB) -> + ducount_merge_1(ducount_to_list(DCA), DCB); +ducount_merge(DCA, DCB) when map_size(DCA) >= map_size(DCB) -> + ducount_merge_1(ducount_to_list(DCB), DCA). + +ducount_merge_1([], DUCount) -> DUCount; +ducount_merge_1([{T,AC}|Ts], DUCount0) -> + DUCount = + case DUCount0 of + #{T := BC} -> DUCount0#{T := AC + BC}; + #{} -> DUCount0#{T => AC} + end, + ducount_merge_1(Ts, DUCount). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Target module interface functions +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +-define(TGT_IFACE_0(N), N( {M,C}) -> M:N( C)). +-define(TGT_IFACE_1(N), N(A1, {M,C}) -> M:N(A1, C)). +-define(TGT_IFACE_2(N), N(A1,A2, {M,C}) -> M:N(A1,A2, C)). +-define(TGT_IFACE_3(N), N(A1,A2,A3,{M,C}) -> M:N(A1,A2,A3,C)). + +?TGT_IFACE_2(bb). +?TGT_IFACE_1(def_use). +?TGT_IFACE_1(defines). +?TGT_IFACE_1(defines_all_alloc). +?TGT_IFACE_1(is_precoloured). +?TGT_IFACE_1(mk_goto). +?TGT_IFACE_2(mk_move). +?TGT_IFACE_0(new_label). +?TGT_IFACE_0(new_reg_nr). +?TGT_IFACE_1(number_of_temporaries). +?TGT_IFACE_3(redirect_jmp). +?TGT_IFACE_1(reg_nr). +?TGT_IFACE_1(reverse_postorder). +?TGT_IFACE_2(subst_temps). +?TGT_IFACE_3(update_bb). +?TGT_IFACE_2(update_reg_nr). + +branch_preds(Instr, {TgtMod,TgtCtx}) -> + merge_sorted_preds(lists:keysort(1, TgtMod:branch_preds(Instr, TgtCtx))). + +livein(Liveness, L, Target={TgtMod,TgtCtx}) -> + ordsets:from_list(reg_names(TgtMod:livein(Liveness, L, TgtCtx), Target)). + +liveout(Liveness, L, Target={TgtMod,TgtCtx}) -> + ordsets:from_list(reg_names(TgtMod:liveout(Liveness, L, TgtCtx), Target)). + +merge_sorted_preds([]) -> []; +merge_sorted_preds([{L, P1}, {L, P2}|LPs]) -> + merge_sorted_preds([{L, P1+P2}|LPs]); +merge_sorted_preds([LP|LPs]) -> [LP|merge_sorted_preds(LPs)]. + +reg_names(Regs, {TgtMod,TgtCtx}) -> + [TgtMod:reg_nr(X,TgtCtx) || X <- Regs]. diff --git a/lib/hipe/regalloc/hipe_regalloc_loop.erl b/lib/hipe/regalloc/hipe_regalloc_loop.erl index 5d32073437..29ef3adcc2 100644 --- a/lib/hipe/regalloc/hipe_regalloc_loop.erl +++ b/lib/hipe/regalloc/hipe_regalloc_loop.erl @@ -99,11 +99,19 @@ call_allocator(CFG, Liveness, SpillLimit, SpillIndex, Options, RegAllocMod, TargetCtx, Options) end. -do_range_split(CFG0, Liveness, TgtMod, TgtCtx, Options) -> - case proplists:get_bool(ra_restore_reuse, Options) of +do_range_split(CFG0, Liveness0, TgtMod, TgtCtx, Options) -> + {CFG2, Liveness1} = + case proplists:get_bool(ra_restore_reuse, Options) of + true -> + CFG1 = hipe_restore_reuse:split(CFG0, Liveness0, TgtMod, TgtCtx), + {CFG1, TgtMod:analyze(CFG1, TgtCtx)}; + false -> + {CFG0, Liveness0} + end, + case proplists:get_bool(ra_range_split, Options) of true -> - CFG1 = hipe_restore_reuse:split(CFG0, Liveness, TgtMod, TgtCtx), - {CFG1, TgtMod:analyze(CFG1, TgtCtx)}; + CFG3 = hipe_range_split:split(CFG2, Liveness1, TgtMod, TgtCtx, Options), + {CFG3, TgtMod:analyze(CFG3, TgtCtx)}; false -> - {CFG0, Liveness} + {CFG2, Liveness1} end. diff --git a/lib/hipe/regalloc/hipe_restore_reuse.erl b/lib/hipe/regalloc/hipe_restore_reuse.erl index 2d8dea2a2c..2158bd185e 100644 --- a/lib/hipe/regalloc/hipe_restore_reuse.erl +++ b/lib/hipe/regalloc/hipe_restore_reuse.erl @@ -36,6 +36,14 @@ -export([split/4]). +%% Exports for hipe_range_split, which uses restore_reuse as one possible spill +%% "mode" +-export([analyse/3 + ,renamed_in_block/2 + ,split_in_block/2 + ]). +-export_type([avail/0]). + -compile(inline). %% -define(DO_ASSERT, 1). @@ -59,7 +67,7 @@ split(CFG, Liveness, TargetMod, TargetContext) -> rewrite(CFG, Target, Avail). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% --type avail() :: #{label() => avail_bb()}. +-opaque avail() :: #{label() => avail_bb()}. -record(avail_bb, { %% Blocks where HasCall is true are considered to have too high @@ -332,6 +340,11 @@ rewrite([L|Ls], Target, Avail, Input0, CFG0) -> Input1, CFG1), rewrite(Ls, Target, Avail, Input, CFG). +-spec renamed_in_block(label(), avail()) -> ordsets:ordset(reg()). +renamed_in_block(L, Avail) -> + ordsets:union([avail_self(L, Avail), want_in(L, Avail), + want_out(L, Avail)]). + -spec split_in_block(label(), avail()) -> ordsets:ordset(reg()). split_in_block(L, Avail) -> ordsets:subtract(ordsets:union(avail_self(L, Avail), want_out(L, Avail)), |