The R13B03 release.OTP_R13B03

1 files changed, 367 insertions, 0 deletions

diff --git a/system/AD.sgml b/system/AD.sgml
new file mode 100644
index 0000000000..e7fc9755ed
--- /dev/null
+++ b/system/AD.sgml
@@ -0,0 +1,367 @@
+<!doctype report PUBLIC "-//Stork//DTD report//EN">
+
+<report>
+  <header>
+    <title>AMENDMENT DIRECTIVE, OTP</title> 
+    <prepared>ETX/B/SFP Kenneth Lundin, Lars Thors&#233;n, Morgan Eriksson</prepared>
+    <responsible></responsible>
+    <docno>1/177 82 - APN 181 01</docno>
+    <approved>ETX/B/SF Torbj&ouml;rn Johnson</approved>
+    <checked></checked>
+    <date>961023</date>
+    <rev>I</rev>
+    <file>tr1c.sgml</file>
+  </header>
+  
+<section>
+<title>Introduction</title>
+<p>
+<section><title>Purpose</title>
+<p>
+This update release, OTP P1H, contains a fix for the erl_call problems in OTP P1G.
+</section>
+
+<section><title>Revision History</title>
+<p>
+Rev.A:Kenneth Lundin 1996-05-31<br> 
+Rev.B:Lars Thors&#233;n 1996-06-04<br>
+Rev.C:Kenneth Lundin 1996-06-14<br>
+Rev.D:Kenneth Lundin 1996-08-28<br>
+Rev.E:Lars Thors&#233;n 1996-09-12<br>
+Rev.F:Kenneth Lundin 1996-09-13<br>
+Rev.G:Morgan Ericsson 1996-10-08<br>
+Rev.H:Kenneth Lundin 1996-10-14<br>
+Rev.I:Morgan Eriksson 1996-10-23<br>
+<p>
+The exact changes between revisions of this document can be generated from our ClearCase repository upon request , or a simple unix "diff" can be used.
+</section>
+</section>
+<section><title>Product Identities</title>
+<p>
+<table>
+<row>
+<cell><b>Product Name</b></cell>
+<cell><b>Product Number</b></cell>
+<cell><b>R-state</b></cell>
+</row>
+<row>
+<cell>OTP</cell>
+<cell>APN 181 01</cell>
+<cell>P1H</cell>
+</row>
+<row>
+<cell>ERTS (sunos4)</cell>
+<cell>CXC 138 10/1</cell>
+<cell>P1G</cell>
+</row>
+<row>
+<cell>ERTS (sunos5)</cell>
+<cell>CXC 138 10/2</cell>
+<cell>P1G</cell>
+</row>
+<row>
+<cell>SASL (BOS) (sunos4)</cell>
+<cell>CXC 138 11/1</cell>
+<cell>P1D</cell>
+</row>
+<row>
+<cell>SASL (BOS) (sunos5)</cell>
+<cell>CXC 138 11/2</cell>
+<cell>P1D</cell>
+</row>
+<row>
+<cell>MNESIA</cell>
+<cell>CXC 138 12/1</cell>
+<cell>P1E</cell>
+</row>
+<row>
+<cell>SNMPEA</cell>
+<cell>CXC 138 13/1</cell>
+<cell>P1D</cell>
+</row>
+<row>
+<cell>ERLDEV (Compiler & Debugger)</cell>
+<cell>CXC 138 15/1</cell>
+<cell>P1C</cell>
+</row>
+<row>
+<cell>DEVTOOLS (sunos4)</cell>
+<cell>CXC 138 16/1</cell>
+<cell>P1D</cell>
+</row>
+<row>
+<cell>DEVTOOLS (sunos5)</cell>
+<cell>CXC 138 16/2</cell>
+<cell>P1D</cell>
+</row>
+<row>
+<cell>XLATETOOLS (sunos4)</cell>
+<cell>CXC 138 17/1</cell>
+<cell>P1D</cell>
+</row>
+<row>
+<cell>XLATETOOLS (sunos5)</cell>
+<cell>CXC 138 17/2</cell>
+<cell>P1D</cell>
+</row>
+<row>
+<cell>CPO Solaris (XNTP)</cell>
+<cell>CXC 138 46/1</cell>
+<cell>P1A</cell>
+</row>
+</table>
+</section>
+<section><title>Document Survey</title>
+<p>
+<table>
+<row>
+<cell><b>Document name</b></cell>
+<cell><b>Document number</b></cell>
+<cell>Rev</cell>
+</row>
+<row>
+<cell>Systems Overview</cell>
+<cell>1551-APN 181 01</cell>
+<cell>A</cell>
+</row>
+<row>
+<cell>Erlang Tools Introduction</cell>
+<cell>EPK-95:030/1</cell>
+<cell>A</cell>
+</row>
+<row>
+<cell>Erlang Tools User's Guide</cell>
+<cell>EPK-95:030/2</cell>
+<cell>A</cell>
+</row>
+<row>
+<cell>Erlang Tools</cell>
+<cell>EPK-95:030/3</cell>
+<cell>A</cell>
+</row>
+<row>
+<cell>Distributed Erlang User's Guide</cell>
+<cell>EPK-95:030/4</cell>
+<cell>A</cell>
+</row>
+<row>
+<cell>Erlang Tools Examples</cell>
+<cell>EPK-95:030/5</cell>
+<cell>A</cell>
+</row>
+
+<row>
+<cell>User's Guide to the Erlang Interface Library</cell>
+<cell>3/1553-CNA 121 16</cell>
+<cell>A</cell>
+</row>
+<row>
+<cell>Erlang Interface Library Examples</cell>
+<cell>1/198 17-CNA 121 16</cell>
+<cell>A</cell>
+</row>
+<row>
+<cell>Programmer's Guide to the Erlang Interface Library</cell>
+<cell>2/198 17-CNA 121 16</cell>
+<cell>A</cell>
+</row>
+
+<row>
+<cell>OTP Erlang User's guide</cell>
+<cell>1553-CNA 121 17</cell>
+<cell>A</cell>
+</row>
+
+<row>
+<cell>The Mnesia Query Language Mnemosyne</cell>
+<cell>1553-CNA 121 18</cell>
+<cell>A</cell>
+</row>
+
+<row>
+<cell>SNMPEA User's Guide</cell>
+<cell>1553-CNA 121 19</cell>
+<cell>A</cell>
+</row>
+
+<row>
+<cell>SNMPEA Reference Guide</cell>
+<cell>1551-CNA 121 19</cell>
+<cell>A</cell>
+</row>
+
+<row>
+<cell>User's Guide to the Interface Generator</cell>
+<cell>1553-CNA 121 38</cell>
+<cell>A</cell>
+</row>
+
+</table>
+
+<p>
+A complete browseable document survey is available at the OTP WWW-server http://otp.ericsson.se and can also be found in the release at $OTP_ROOT/doc/all.html when the 
+release file is un-tar:ed at $OTP_ROOT.
+</section>
+<section><title>Implemented Change requests</title>
+<p>
+-
+</section>
+<section><title>Implemented Trouble Reports</title>
+<p>
+<table>
+<row>
+<cell><b>Block</b></cell>
+<cell><b>TR id</b></cell>
+<cell><b>Slogan</b></cell>
+</row>
+<row>
+<cell>ERTS</cell>
+<cell>-</cell>
+<cell>
+erl_call crashes (Segmentation fault) has now been fixed
+</cell>
+</row>
+</table>
+</section>
+<section><title>Installation Instructions</title>
+<p>
+The release is delivered as a compressed tar-file <b>otp_APN18101_P1H.&lt;target&gt;.tar.Z</b>, where &lt;target&gt; is substituted with <b>sunos4</b> or <b>sunos5</b>.
+<p>
+Then the following steps shall be performed at installation time:
+</p>
+<list>
+<item><p>Create a new directory $OTP_INSTALL_DIR where OTP can be installed.
+<code>
+mkdir $OTP_INSTALL_DIR
+cd $OTP_INSTALL_DIR
+uncompress $XXX/otp_APN18101_P1H.<target>.tar.Z
+tar xvfp  $XXX/otp_APN18101_P1H.<target>.tar
+</code>
+</item>
+<item><p>Run the OTP installscript and answer the questions.
+<code>
+./Install $OTP_INSTALL_DIR
+</code>
+<p>
+The Install command will ask a number of questions during the installation.
+<b>OBS!</b> When installing on a system where DNS is not used you 
+should answer <b>NO</b> on the question "WILL YOU USE DNS?"
+</item>
+<item><p>Prepare the OTP man pages.
+<code>
+mkdir man/cat1 man/cat3
+./format_man_pages
+</code>
+<item><p>Update the erl_interface library with ranlib (sunos4 only).
+<code>
+cd $OTP_INSTALL_DIR/usr/lib
+ranlib liberl_interface.a
+</code>
+</item>
+</list>
+<p>
+Add $OTP_INSTALL_DIR/bin to the path variable and $OTP_INSTALL_DIR/man to the MANPATH variable.
+<p>
+Where <b>$XXX</b> denotes the path at which otp_APN18101_P1H.&lt;target&gt;.tar resides.
+
+<section><title>Separate (optional) Installation of XNTP (Network Time Protocol)</title>
+<p>
+XNTP (Network Time Protocol) <b>for use in an embedded system running Sunos5</b> is
+delivered in this release. The XNTP resides in the tar-file xntp_CXC_13846_P1A.sunos5.tar.Z and  can be fetched with Netscape from the same place as the other OTP deliverables.
+<list>
+<item><p>Create a new directory $XNTP_DIR where the XNTP distribution can be loaded.
+<code>
+mkdir $XNTP_DIR
+cd $XNTP_DIR
+uncompress $XXX/xntp_CXC_13846_P1A.sunos5.tar.Z
+tar xvf $XXX/xntp_CXC_13846_P1A.sunos5.tar.Z
+</code>
+</item>
+<item><p>Read the README-file which is included, below follows information which
+is partly the same as can be found at the end of the README file.</item>
+<item><p>Note, the xntp3.5a.export subdirectory is not needed for installation.
+
+<p>Create a suitable configuration file based on the samples in the
+'config' directory, and copy it to /etc/ntp.conf.</item>
+
+<item><p>Create a directory for the binaries and copy them there:<br>
+<code>
+mkdir -p /opt/xntp/bin
+cp bin/* /opt/xntp/bin
+</code>
+<p>Note!, if you prefer another installation directory for the binaries, you have to edit one line in the "Run Commands" script xntp (located in the init directory):
+<code>
+BINDIR=<your new bindir>;
+</code>
+</item>
+
+<item><p>Install the "Run Commands" script:<br>
+<code>
+cp init/xntp /etc/init.d/xntp<br>
+ln /etc/init.d/xntp /etc/rc0.d/K57xntp
+ln /etc/init.d/xntp /etc/rc1.d/K57xntp
+ln /etc/init.d/xntp /etc/rc2.d/S78xntp
+</code>
+</item>
+
+<item><p>Modify the /etc/system file (you probably want to save the original):<br>
+<code>
+cat init/system >> /etc/system
+</code>
+</item>
+
+</list> 
+<p>
+Where <b>$XXX</b> denotes the path at which xntp_CXC13846_P1A.sunos5.tar.Z resides.
+</section>
+</section>
+
+<section><title>Some useful notes</title>
+<p>
+To make it possible to browse Framemaker documents through Netscape the files
+.mime.types and .mailcap should be modified (see below). The modifications
+can be made as systems defaults if they are placed in e.g /usr/local/lib/netscape (see Netscape Handbook for details) or as personal defaults if placed in the
+users $HOME directory.
+<p>
+.mime.types
+<p>
+<pre>
+application/x-maker  fm
+</pre>
+<p>
+
+.mailcap
+<p>
+<pre>
+application/x-maker;	fmclient -f %s
+</pre>
+</section>
+<section><title>Known problems in this release</title>
+<p>
+<list>
+<item><p>In the manual-page for module code, the returned value of the function
+which is described to be String but in reality it is an Atom (for compatibility
+reasons). In the next release the return type will however be String as it says
+in the manual-page.</item>
+<item><p>On SunOS4.x platforms, the format_man_pages script (executed as a part of installation) will cause following error messages for missing manual sections:
+<p><code>opendir:man{2,4,5,6,7,8,l,n}: No such file or directory</code>
+<p>These messages should be ignored.
+</item>
+
+</list>
+</section>
+<section><title>References</title>
+<p>
+<i>Nothing to reference</i>
+
+</section>
+</report>
+
+
+
+
+
+
+
+
+