aboutsummaryrefslogtreecommitdiffstats
path: root/system/README.unixware
diff options
context:
space:
mode:
authorErlang/OTP <[email protected]>2009-11-20 14:54:40 +0000
committerErlang/OTP <[email protected]>2009-11-20 14:54:40 +0000
commit84adefa331c4159d432d22840663c38f155cd4c1 (patch)
treebff9a9c66adda4df2106dfd0e5c053ab182a12bd /system/README.unixware
downloadotp-84adefa331c4159d432d22840663c38f155cd4c1.tar.gz
otp-84adefa331c4159d432d22840663c38f155cd4c1.tar.bz2
otp-84adefa331c4159d432d22840663c38f155cd4c1.zip
The R13B03 release.OTP_R13B03
Diffstat (limited to 'system/README.unixware')
-rw-r--r--system/README.unixware201
1 files changed, 201 insertions, 0 deletions
diff --git a/system/README.unixware b/system/README.unixware
new file mode 100644
index 0000000000..b9f9433723
--- /dev/null
+++ b/system/README.unixware
@@ -0,0 +1,201 @@
+
+OTP R4B b1 UnixWare Release Notes
+------------------------------------
+
+Kent Boortz
+
+This is an *unsupported* release of OTP to UnixWare 2.1.2.
+In fact, it should not be considered a release or a product at all,
+it is a demo what a real release could look like.
+
+Questions should be directed directly to
+
+ Kent Boortz
+
+Changes or problems:
+
+ * There is no documentation as part of this release.
+ Use the R5B documentation that comes with the
+ Solaris release.
+
+ * To run older graphical tools based on 'pxw' like
+ 'xerl' and 'interpreter' you have to add
+ "/usr/X/lib" to your LD_LIBRARY_PATH.
+
+ * The OTP test cases looks reasonable well considering the
+ short time I had to do the port. The tests of the base
+ system gives equal results than on Solaris. There are
+ some problems with the 'ic' application (CORBA) and there
+ may be some 'mnesia' problems (the tests where not completed
+ when I wrote this note)
+
+ * OTP normally try to handle IP host name lookups
+ by itself, parsing /etc/hosts and other configuration
+ files. This is done because the normal calls like
+ gethostbyname() is blocking. In this UnixWare port
+ the normal gethostbyname() is used and if a reply
+ from the name server takes some time this may block
+ the OTP system from doing other tasks (it may be the
+ case that it doesn't block the whole system, it may
+ just keep other Erlang processes that do DNS lookups
+ waiting, I'm not sure).
+
+ * The erl_interface library support varios types of threading
+ This is not supported in the OTP UnixWare release.
+
+ * If you use gcc you compile and link dynamic drivers with
+
+ gcc -fPIC -c foo.c
+ ld -G -t text -o foo.so foo.o
+
+ With the UnixWare C compiler I belive it will be
+
+ gcc -KPIC -c foo.c
+ ld -G -t text -o foo.so foo.o
+
+ * The default shell limits was a problem when I was running
+ some large tests. These limits can be changed by building
+ a new kernel. To enable unlimited use of virtual memory
+ and data you do as root
+
+ % /etc/conf/bin/idtune SDATLIM 0x7FFFFFFF
+ % /etc/conf/bin/idtune HDATLIM 0x7FFFFFFF
+ % /etc/conf/bin/idtune SVMMLIM 0x7FFFFFFF
+ % /etc/conf/bin/idtune HVMMLIM 0x7FFFFFFF
+ % /etc/conf/bin/idbuild
+
+ When you reboot a new kernel will be built.
+
+ * I didn't give the system enough swap space. You can add
+ swap on an ordinary file. To add about 100 MB more swap
+ you do as root
+
+ % dd < /dev/zero > /moreswap bs=512 count=200000
+ % swap -a /moreswap 0 200000
+
+ The first line will create a 100 MB file on the root partition
+ and the second line will add this file as swap space. Note that
+ the "swap" command is a bit buggy and may hang. Reboot UnixWare
+ and try again.
+
+Internel notes on build the release
+
+ * If the network addresses are changed you enter single user
+ mode by hitting a key after the "Booting UnixWare..." and
+ the beep. At the prompt
+
+ BOOT# Hit return only to clear line
+ BOOT# INITSTATE=S
+ BOOT# go
+
+ This will put you into single user mode. Find out ip address,
+ default router and DNS server. At the shell prompt
+
+ # /usr/local/bin/tcsh
+ # setenv TERM vt100
+ # cd /etc
+ # vi resolv.conf
+ < edit and save with :x! >
+ # cd /etc/inet
+ # vi hosts
+ < edit and save with :x! >
+ # vi config
+ < edit and save with :x! >
+ # cd /
+ # shutdown now
+
+ Now it should be possible to restart in single user mode.
+ It may still have long timeouts because the NIS information
+ is wrong. As root you do
+
+ # ypinit -c
+
+ and type in "arda" as NIS domain and "gandalf.du.uab.ericsson.se"
+ as NIS server.
+
+ * Prebuilding the release. Create a view with the -ncaexported option.
+ See "http://otp/product/internal/test/doc/howto/export_view.html".
+ Build a solaris release (optionally using a boostrap compiler)
+
+ # cd /clearcase/otp/erts/autoconf; cm -V; cd ..
+ # cm -V opt EMULATOR=jam BUILD_ALL=1 >& LOG.1
+
+ * Create the directories for mount points and mount the view on
+ the UnixWare machine.
+
+ # mkdir -p /clearcase/otp; cd /clearcase/otp
+ # mkdir erts internal_tools libraries system tools
+
+ Use s script like
+
+ #!/bin/sh
+ HOST=$1
+ VIEW=$2
+ MOUNT=$HOST:/view/$VIEW/clearcase/otp
+
+ mount -F nfs $MOUNT/erts $DIR/erts
+ mount -F nfs $MOUNT/libraries $DIR/libraries
+ mount -F nfs $MOUNT/tools $DIR/tools
+ mount -F nfs $MOUNT/internal_tools $DIR/internal_tools
+ mount -F nfs $MOUNT/system $DIR/system
+
+ to mount the ClearCase VOBs.
+
+ * Building the
+ * Building the
+
+ "/usr/X/lib" to your LD_LIBRARY_PATH.
+
+ Had to patch the file
+
+ /usr/local/lib/g++-include/_G_config.h
+
+ not to define _G_HAVE_SYS_CDEFS 1
+
+ Problems with pxw yacc
+
+ yacc -dv -b i386-univel-sysv4.2MP/y parse.y
+ UX:yacc: ERROR: Illegal option -- b
+ UX:yacc: TO FIX: Usage: yacc [-wvVdlt] [-Q(y/n)] [-p driver_file] file
+ gmake[6]: *** [i386-univel-sysv4.2MP/y.tab.c] Error 1
+
+ Create some symbolic links (until got compiled libs for UnixWare)
+
+ # cd crypt/src/ssleay
+ # ln -s elibcrypto.so.i386-pc-solaris2.5.1 elibcrypto.so.i386-univel-sysv4.2MP
+ # cd ssl/src/ssleay
+ # ln -s i386-pc-solaris2.5.1 i386-univel-sysv4.2MP
+
+ Run
+
+ # ntpdate super.du.uab.ericsson.se
+
+ now and then to set the time on the machine.
+
+
+ Disabled HAVE_MULTICAST_SUPPORT from "drv/inet_drv.c", should be set in configure
+
+ UnixWare want two arguments to 'ln'
+
+ SkunkWare gcc, ln, tar, ..... required, make sure PATH points out them first
+
+ The emulator has to be linked with "gcc -r -Wl,-Bexport " to be linkable
+ with dynamic libraries.
+
+ Tcl/Tk was compiled from
+
+ tcl7.6p2plus.tar.gz
+ tk4.2p2plus.tar.gz
+
+ and the make-files where changed, see
+
+ (not needed it seems, if not using gcc at least)
+
+
+ VILL HA "-ly -ll" BARA PA PXW ???????
+
+ You can view the limits of the Unix processes in
+
+ /etc/conf/mtune.d/proc
+