doc: Correct errors introduced by Editorial changes

Fix some older errors as well.

9 files changed, 28 insertions, 28 deletions

diff --git a/system/doc/design_principles/statem.xml b/system/doc/design_principles/statem.xml
index f785ca9650..57e47431b8 100644
--- a/system/doc/design_principles/statem.xml
+++ b/system/doc/design_principles/statem.xml
@@ -33,7 +33,7 @@
   <p>
     This section is to be read with the
     <seealso marker="stdlib:gen_statem"><c>gen_statem(3)</c></seealso>
-    manual page in <c>STDLIB</c>, where all interface functions and callback
+    manual page in STDLIB, where all interface functions and callback
     functions are described in detail.
   </p>
   <note>
@@ -310,7 +310,7 @@ start_link(Code) ->
           as <c>{global,Name}</c>, then the <c>gen_statem</c> is
           registered using
           <seealso marker="kernel:global#register_name/2"><c>global:register_name/2</c></seealso>
-          in <c>Kernel</c>.
+          in Kernel.
         </p>
       </item>
       <item>
diff --git a/system/doc/efficiency_guide/advanced.xml b/system/doc/efficiency_guide/advanced.xml
index 016302fe50..eee2648f34 100644
--- a/system/doc/efficiency_guide/advanced.xml
+++ b/system/doc/efficiency_guide/advanced.xml
@@ -156,7 +156,7 @@
 	<seealso marker="erts:erl#max_processes"><c>+P</c></seealso>
 	command-line flag in the
 	<seealso marker="erts:erl"><c>erl(1)</c></seealso>
-	manual page in <c>erts</c>.</cell>
+	manual page in ERTS.</cell>
       </row>
       <row>
 	<cell>Known nodes</cell>
@@ -236,7 +236,7 @@
 	<seealso marker="erts:erl#max_ports"><c>+Q</c></seealso>
 	command-line flag in the
 	<seealso marker="erts:erl"><c>erl(1)</c></seealso> manual page
-	in <c>erts</c>.</cell>
+	in ERTS.</cell>
       </row>
       <row>
 	<cell><marker id="files_sockets"></marker>Open files and
diff --git a/system/doc/efficiency_guide/profiling.xml b/system/doc/efficiency_guide/profiling.xml
index 1f3d503170..bf50a03fa6 100644
--- a/system/doc/efficiency_guide/profiling.xml
+++ b/system/doc/efficiency_guide/profiling.xml
@@ -128,7 +128,7 @@
       performance impact. Using <c>fprof</c> is just a matter of
       calling a few library functions, see the
       <seealso marker="tools:fprof">fprof</seealso> manual page in
-      <c>tools</c> .<c>fprof</c> was introduced in R8.</p>
+      Tools .<c>fprof</c> was introduced in R8.</p>
     </section>
 
     <section>
@@ -138,7 +138,7 @@
       and in which function calls this time has been spent. Time is
       shown as percentage of total time and absolute time. For more
       information, see the <seealso marker="tools:eprof">eprof</seealso>
-      manual page in <c>tools</c>.</p>
+      manual page in Tools.</p>
     </section>
 
     <section>
@@ -152,7 +152,7 @@
       optimization. Using <c>cover</c> is just a matter of calling a
       few library functions, see the
       <seealso marker="tools:cover">cover</seealso> manual page in
-      <c>tools</c>.</p>
+      Tools.</p>
     </section>
 
     <section>
@@ -165,7 +165,7 @@
       any modules to profile (compared with <c>cover</c>).
       For more information, see the
       <seealso marker="tools:cprof">cprof</seealso> manual page in
-      <c>tools</c>.</p>
+      Tools.</p>
     </section>
 
     <section>
diff --git a/system/doc/embedded/embedded_nt.xml b/system/doc/embedded/embedded_nt.xml
index a1a4b90f3c..8e05100585 100644
--- a/system/doc/embedded/embedded_nt.xml
+++ b/system/doc/embedded/embedded_nt.xml
@@ -62,7 +62,7 @@
       <p>For Windows NT running on standard PCs with ISA and/or PCI bus,
         an extension card with a hardware watchdog can be installed.</p>
       <p>For more information, see the <c>heart(3)</c> manual page in
-        <c>kernel</c>.</p>
+        Kernel.</p>
     </section>
   </section>
 
@@ -72,7 +72,7 @@
       to install the Erlang process as a Windows system service.
       This service can start after Windows NT has booted.</p>
     <p>For more information, see the <c>erlsrv</c> manual page
-      in <c>erts</c>.</p>
+      in ERTS.</p>
   </section>
 </chapter>
 
diff --git a/system/doc/embedded/embedded_solaris.xml b/system/doc/embedded/embedded_solaris.xml
index f8febcc546..eaa334fb39 100644
--- a/system/doc/embedded/embedded_solaris.xml
+++ b/system/doc/embedded/embedded_solaris.xml
@@ -190,7 +190,7 @@ esac</pre>
         the onboard hardware watchdog can be activated,
 	provided a VME bus driver is added to the operating system
         (see also Installation Problems).</p>
-      <p>See also the <c>heart(3)</c> manual page in <c>kernel</c>.</p>
+      <p>See also the <c>heart(3)</c> manual page in Kernel.</p>
     </section>
 
     <section>
@@ -206,7 +206,7 @@ esac</pre>
       <pre>
         chown 0 /usr/sbin/reboot
         chmod 4755 /usr/sbin/reboot</pre>
-      <p>See also the <c>heart(3)</c> manual page in <c>kernel</c>.</p>
+      <p>See also the <c>heart(3)</c> manual page in Kernel.</p>
     </section>
 
     <section>
@@ -413,8 +413,8 @@ chown root mod_syslog]]></code>
     <section>
       <title>Related Documents</title>
       <p>See the <c>os_mon(3)</c> application,
-      the <c>application(3)</c> manual page in <c>kernel</c>,
-      and the <c>erl(1)</c> manual page in <c>erts</c>.</p>
+      the <c>application(3)</c> manual page in Kernel,
+      and the <c>erl(1)</c> manual page in ERTS.</p>
     </section>
   </section>
 
@@ -474,7 +474,7 @@ chown root mod_syslog]]></code>
         default, it must be called <c>start</c> and reside in
         <c><![CDATA[<ERL_INSTALL_DIR>/bin]]></c>. Another start
 	program can be used, by using configuration parameter
-	<c>start_prg</c> in application <c>sasl</c>.</p>
+	<c>start_prg</c> in application SASL.</p>
       <p>The start program must call <c>run_erl</c> as shown below.
         It must also take an optional parameter, which defaults to
         <c><![CDATA[<ERL_INSTALL_DIR>/releases/start_erl.data]]></c>.</p>
@@ -484,7 +484,7 @@ chown root mod_syslog]]></code>
       <p>The <c><![CDATA[<RELDIR>]]></c> directory is where new release
         packets are installed, and where the release handler keeps
 	information about releases. For more information, see the
-	<c>release_handler(3)</c> manual page in <c>sasl</c>.</p>
+	<c>release_handler(3)</c> manual page in SASL.</p>
       <p>The following script illustrates the default behaviour of the
         program:</p>
       <code type="none"><![CDATA[
@@ -624,7 +624,7 @@ export RELDIR
 exec $BINDIR/erlexec -boot $RELDIR/$VSN/start -config $RELDIR/$VSN/sys $*</code>
 
       <p>If a diskless and/or read-only client node with the
-        <c>sasl</c> configuration parameter <c>static_emulator</c> set
+        SASL configuration parameter <c>static_emulator</c> set
         to <c>true</c> is about to start, the <c>-boot</c> and
         <c>-config</c> flags must be changed.</p>
 	<p>As such a client cannot
diff --git a/system/doc/embedded/starting.xml b/system/doc/embedded/starting.xml
index 720383e8ac..11bf9b412a 100644
--- a/system/doc/embedded/starting.xml
+++ b/system/doc/embedded/starting.xml
@@ -69,7 +69,7 @@
         default, it must be called <c>start</c> and reside in
         <c><![CDATA[<ERL_INSTALL_DIR>/bin]]></c>.  Another start program can be
         used, by using the configuration parameter <c>start_prg</c> in
-        the application <c>sasl</c>.</p>
+        application SASL.</p>
       <p>The start program must call <c>run_erl</c> as shown below.
         It must also take an optional parameter which defaults to
         <c><![CDATA[<ERL_INSTALL_DIR>/bin/start_erl.data]]></c>.
@@ -80,8 +80,8 @@
         </p>
       <p>The <c><![CDATA[<RELDIR>]]></c> directory is where new release packets
         are installed, and where the release handler keeps information
-        about releases.  See <c>release_handler(3)</c> in the
-        application <c>sasl</c> for further information.
+        about releases.  See <c>release_handler(3)</c> in
+        application SASL for further information.
         </p>
       <p>The following script illustrates the default behaviour of the
         program.
@@ -228,7 +228,7 @@ export PROGNAME
 export RELDIR
 
 exec $BINDIR/erlexec -boot $RELDIR/$VSN/start -config $RELDIR/$VSN/sys $*      </code>
-      <p>If a diskless and/or read-only client node with the <c>sasl</c>
+      <p>If a diskless and/or read-only client node with the SASL
         configuration parameter <c>static_emulator</c> set to <c>true</c>
         is about to start the <c>-boot</c> and <c>-config</c> flags must be
         changed. As such a client can not read a new <c>start_erl.data</c>
diff --git a/system/doc/oam/oam_intro.xml b/system/doc/oam/oam_intro.xml
index cdcb6e3111..8b8d69e638 100644
--- a/system/doc/oam/oam_intro.xml
+++ b/system/doc/oam/oam_intro.xml
@@ -178,7 +178,7 @@
     <section>
       <title>MIB Structure</title>
       <p>The top-level OTP MIB is called <c>OTP-REG</c> and it is
-      included in the <c>sasl</c> application. All other OTP MIBs
+      included in the SASL application. All other OTP MIBs
       import some objects from this MIB.</p>
 
       <p>Each MIB is contained in one application. The MIB text
@@ -188,7 +188,7 @@
       <c><![CDATA[include/<MIB>.hrl]]></c>, and the compiled MIBs
       are stored under <c><![CDATA[priv/mibs/<MIB>.bin]]></c>.
       For example, the <c>OTP-MIB</c> is included in the
-      <c>sasl</c> application:</p>
+      SASL application:</p>
 
       <code type="none">
 sasl-1.3/mibs/OTP-MIB.mib
@@ -211,11 +211,11 @@ snmp:c("MY-MIB", [{il, ["sasl/priv/mibs"]}]).</code>
 
       <p>The following MIBs are defined in the OTP system:</p>
       <list type="bulleted">
-	<item><p><c>OTP-REG)</c> (in <c>sasl</c>) contains the top-level
+	<item><p><c>OTP-REG)</c> (in SASL) contains the top-level
 	OTP registration objects, used by all other MIBs.</p></item>
-	<item><p><c>OTP-TC</c> (in <c>sasl</c>) contains the general
+	<item><p><c>OTP-TC</c> (in SASL) contains the general
 	Textual Conventions, which can be used by any other MIB.</p></item>
-	<item><p><c>OTP-MIB</c> (in <c>sasl</c>) contains objects for
+	<item><p><c>OTP-MIB</c> (in SASL) contains objects for
 	instrumentation of the Erlang nodes, the Erlang machines,
 	and the applications in the system.</p></item>
 	<item><p><c>OTP-OS-MON-MIB</c> (in <c>oc_mon</c>) contains
diff --git a/system/doc/programming_examples/records.xml b/system/doc/programming_examples/records.xml
index da346dd0b3..074aa636b4 100644
--- a/system/doc/programming_examples/records.xml
+++ b/system/doc/programming_examples/records.xml
@@ -93,7 +93,7 @@ person</pre>
       at compile time, not at runtime. For details on records
       in the shell, see the
       <seealso marker="stdlib:shell">shell(3)</seealso>
-      manual page in <c>stdlib</c>.</p>
+      manual page in STDLIB.</p>
   </section>
 
   <section>
diff --git a/system/doc/reference_manual/typespec.xml b/system/doc/reference_manual/typespec.xml
index f17e5df277..1899efd5f3 100644
--- a/system/doc/reference_manual/typespec.xml
+++ b/system/doc/reference_manual/typespec.xml
@@ -47,7 +47,7 @@
     <list type="bulleted">
       <item>To document function interfaces</item>
       <item>To provide more information for bug detection tools,
-      such as <c>Dialyzer</c></item>
+      such as Dialyzer</item>
       <item>To be exploited by documentation tools, such as EDoc, for
       generating program documentation of various forms</item>
     </list>