ose: Remove all code related to the OSE port

The OSE port is no longer supported and this commit removed it
and any changes related to it. The things that were general
improvements have been left in the code.

1 files changed, 0 insertions, 305 deletions

diff --git a/xcomp/erl-xcomp-sfk-linux-ose5.conf b/xcomp/erl-xcomp-sfk-linux-ose5.conf
deleted file mode 100644
index a4d64e5636..0000000000
--- a/xcomp/erl-xcomp-sfk-linux-ose5.conf
+++ /dev/null
@@ -1,305 +0,0 @@
-## -*-shell-script-*-
-##
-## %CopyrightBegin%
-##
-## Copyright Ericsson AB 2009-2012. All Rights Reserved.
-##
-## Licensed under the Apache License, Version 2.0 (the "License");
-## you may not use this file except in compliance with the License.
-## You may obtain a copy of the License at
-##
-##     http://www.apache.org/licenses/LICENSE-2.0
-##
-## Unless required by applicable law or agreed to in writing, software
-## distributed under the License is distributed on an "AS IS" BASIS,
-## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-## See the License for the specific language governing permissions and
-## limitations under the License.
-##
-## %CopyrightEnd%
-##
-## File: erl-xcomp-sfk-linux-ose5.conf
-## Author: Petre Pircalabu
-##
-## -----------------------------------------------------------------------------
-## When cross compiling Erlang/OTP using `otp_build', copy this file and set
-## the variables needed below. Then pass the path to the copy of this file as
-## an argument to `otp_build' in the configure stage:
-##   `otp_build configure --xcomp-conf=<FILE>'
-## -----------------------------------------------------------------------------
-
-## Note that you cannot define arbitrary variables in a cross compilation
-## configuration file. Only the ones listed below will be guaranteed to be
-## visible throughout the whole execution of all `configure' scripts. Other
-## variables needs to be defined as arguments to `configure' or exported in
-## the environment.
-
-## -- Variables needed for an OSE5 build ---------------------------------------
-OSEROOT="/vobs/ose5/system"
-HOST="linux"
-GCCVERSION="4.6.3"
-GCCROOT="${OSEROOT}/gcc_linux_x86_${GCCVERSION}"
-GCCTARGET="i386-elf"
-
-## -- Variables for `otp_build' Only -------------------------------------------
-
-## Variables in this section are only used, when configuring Erlang/OTP for
-## cross compilation using `$ERL_TOP/otp_build configure'.
-
-## *NOTE*! These variables currently have *no* effect if you configure using
-## the `configure' script directly.
-
-# * `erl_xcomp_build' - The build system used. This value will be passed as
-#   `--build=$erl_xcomp_build' argument to the `configure' script. It does
-#   not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full
-#   `CPU-VENDOR-OS' triplet will be created by
-#   `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess',
-#   the build system will be guessed using
-#   `$ERL_TOP/erts/autoconf/config.guess'.
-erl_xcomp_build=guess
-
-# * `erl_xcomp_host' - Cross host/target system to build for. This value will
-#   be passed as `--host=$erl_xcomp_host' argument to the `configure' script.
-#   It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The
-#   full `CPU-VENDOR-OS' triplet will be created by
-#   `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'.
-erl_xcomp_host="$GCCTARGET-ose"
-
-# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the
-#   `configure' script.
-erl_xcomp_configure_flags="--disable-threads --disable-smp-support --disable-kernel-poll --disable-hipe --without-termcap --without-javac --disable-dynamic-ssl-lib --disable-shared-zlib --without-ssl --enable-static-nifs --enable-static-nifs=$ERL_TOP/lib/asn1/priv/lib/powerpc-unknown-ose/asn1rt_nif.a"
-
-## -- Cross Compiler and Other Tools -------------------------------------------
-
-## If the cross compilation tools are prefixed by `<HOST>-' you probably do
-## not need to set these variables (where `<HOST>' is what has been passed as
-## `--host=<HOST>' argument to `configure').
-
-## All variables in this section can also be used when native compiling.
-
-# * `CC' - C compiler.
-CC="$GCCROOT/bin/$GCCTARGET-gcc"
-
-# * `CFLAGS' - C compiler flags.
-CFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800"
-
-# * `STATIC_CFLAGS' - Static C compiler flags.
-#STATIC_CFLAGS=
-
-# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
-#   search path for the shared libraries. Note that this actually is a
-#   linker flag, but it needs to be passed via the compiler.
-#CFLAG_RUNTIME_LIBRARY_PATH=
-
-# * `CPP' - C pre-processor.
-#CPP=
-
-# * `CPPFLAGS' - C pre-processor flags.
-CPPFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800"
-
-# * `CXX' - C++ compiler.
-#CXX=
-
-# * `CXXFLAGS' - C++ compiler flags.
-CXXFLAGS="-g -fno-strict-aliasing -ansi -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/gcc "
-
-# * `LD' - Linker.
-LD="$GCCROOT/bin/$GCCTARGET-ld"
-
-# * `LDFLAGS' - Linker flags.
-LDFLAGS="-Wl,-ecrt0_lm -Wl,-T,$ERL_TOP/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf"
-
-# * `LIBS' - Libraries.
-LIBS="$OSEROOT/lib/x86/libcrt.a $OSEROOT/lib/x86/libm.a $GCCROOT/lib/gcc/$GCCTARGET/$GCCVERSION/libgcc.a"
-
-## -- *D*ynamic *E*rlang *D*river Linking --
-
-## *NOTE*! Either set all or none of the `DED_LD*' variables.
-
-# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers.
-#DED_LD=
-
-# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'.
-#DED_LDFLAGS=
-
-# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
-#   search path for shared libraries when linking with `DED_LD'.
-#DED_LD_FLAG_RUNTIME_LIBRARY_PATH=
-
-## -- Large File Support --
-
-## *NOTE*! Either set all or none of the `LFS_*' variables.
-
-# * `LFS_CFLAGS' - Large file support C compiler flags.
-#LFS_CFLAGS=
-
-# * `LFS_LDFLAGS' - Large file support linker flags.
-#LFS_LDFLAGS=
-
-# * `LFS_LIBS' - Large file support libraries.
-#LFS_LIBS=
-
-## -- Other Tools --
-
-# * `RANLIB' - `ranlib' archive index tool.
-RANLIB="$GCCROOT/bin/$GCCTARGET-ranlib"
-
-# * `AR' - `ar' archiving tool.
-AR="$GCCROOT/bin/$GCCTARGET-ar"
-
-# * `STRIP' - `strip
-STRIP="$GCCROOT/bin/$GCCTARGET-strip"
-
-# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is
-#   currently used for finding out large file support flags to use, and
-#   on Linux systems for finding out if we have an NPTL thread library or
-#   not.
-#GETCONF=
-
-## -- Cross System Root Locations ----------------------------------------------
-
-# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross
-#   compilation environment. Currently, the `crypto', `odbc', `ssh' and
-#   `ssl' applications need the system root. These applications will be
-#   skipped if the system root has not been set. The system root might be
-#   needed for other things too. If this is the case and the system root
-#   has not been set, `configure' will fail and request you to set it.
-erl_xcomp_sysroot="$OSEROOT"
-
-# * `erl_xcomp_isysroot' - The absolute path to the system root for includes
-#   of the cross compilation environment. If not set, this value defaults
-#   to `$erl_xcomp_sysroot', i.e., only set this value if the include system
-#   root path is not the same as the system root path.
-erl_xcomp_isysroot="$OSEROOT/include"
-
-## -- Optional Feature, and Bug Tests ------------------------------------------
-
-## These tests cannot (always) be done automatically when cross compiling. You
-## usually do not need to set these variables. Only set these if you really
-## know what you are doing.
-
-## Note that some of these values will override results of tests performed
-## by `configure', and some will not be used until `configure' is sure that
-## it cannot figure the result out.
-
-## The `configure' script will issue a warning when a default value is used.
-## When a variable has been set, no warning will be issued.
-
-# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes',
-#   the target system must have a working `__after_morecore_hook' that can be
-#   used for tracking used `malloc()' implementations core memory usage.
-#   This is currently only used by unsupported features.
-#erl_xcomp_after_morecore_hook=
-
-# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system
-#   must be big endian. If `no', little endian. This can often be
-#   automatically detected, but not always. If not automatically detected,
-#   `configure' will fail unless this variable is set. Since no default
-#   value is used, `configure' will try to figure this out automatically.
-#erl_xcomp_bigendian=
-
-# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the
-#   target system must have doubles in "middle-endian" format. If
-#   `no`, it has "regular" endianness. This can often be automatically
-#   detected, but not always. If not automatically detected,
-#   `configure` will fail unless this variable is set. Since no
-#   default value is used, `configure` will try to figure this out
-#   automatically.
-#erl_xcomp_double_middle_endian
-
-# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes',
-#   the target system must have a working `clock_gettime()' implementation
-#   that can be used for retrieving process CPU time.
-#erl_xcomp_clock_gettime_cpu_time=
-
-# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target
-#   system must have a working `getaddrinfo()' implementation that can
-#   handle both IPv4 and IPv6.
-#erl_xcomp_getaddrinfo=
-
-# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes',
-#   the target system must have a working `gethrvtime()' implementation and
-#   is used with procfs `ioctl()'.
-#erl_xcomp_gethrvtime_procfs_ioctl=
-
-# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the
-#   target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation
-#   that can be used on `brk' and `sbrk' symbols used by the `malloc()'
-#   implementation in use, and by this track the `malloc()' implementations
-#   core memory usage. This is currently only used by unsupported features.
-#erl_xcomp_dlsym_brk_wrappers=
-
-# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target
-#   system must have a working `kqueue()' implementation that returns a file
-#   descriptor which can be used by `poll()' and/or `select()'. If `no' and
-#   the target system has not got `epoll()' or `/dev/poll', the kernel-poll
-#   feature will be disabled.
-#erl_xcomp_kqueue=
-
-# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on
-#   Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on
-#   the target system must work. This variable is recommended to be set to
-#   `no' on Linux systems with kernel versions less than 2.6.
-#erl_xcomp_linux_clock_gettime_correction=
-
-# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise,
-#   `no'. If `yes', the target system must have NPTL (Native POSIX Thread
-#   Library). Older Linux systems have LinuxThreads instead of NPTL (Linux
-#   kernel versions typically less than 2.6).
-#erl_xcomp_linux_nptl=
-
-# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux;
-#   otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target
-#   system. `sigaltstack()' on Linux kernel versions less than 2.4 are
-#   broken.
-#erl_xcomp_linux_usable_sigaltstack=
-
-# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes',
-#   the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old
-#   LinuxThreads thread libraries (Linux kernel versions typically less than
-#   2.2) used these signals and made them unusable by the ERTS.
-#erl_xcomp_linux_usable_sigusrx=
-
-# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise,
-#   `yes'. If `yes', the target system must have a working `poll()'
-#   implementation that also can handle devices. If `no', `select()' will be
-#   used instead of `poll()'.
-erl_xcomp_poll=no
-
-# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target
-#   system must have a `putenv()' implementation that stores a copy of the
-#   key/value pair.
-#erl_xcomp_putenv_copy=
-
-# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target
-#   system must have reliable floating point exceptions.
-#erl_xcomp_reliable_fpe=
-
-# * `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1)
-erl_xcomp_ose_ldflags_pass1="-r --no-omagic"
-
-# * `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2)
-erl_xcomp_ose_ldflags_pass2="-n --emit-relocs -ecrt0_lm --no-omagic"
-
-# * `erl_xcomp_ose_OSEROOT` - OSE installation root directory
-erl_xcomp_ose_OSEROOT="$OSEROOT"
-
-# * `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution
-erl_xcomp_ose_STRIP="$GCCROOT/bin/$GCCTARGET-strip"
-
-# * `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool
-erl_xcomp_ose_LM_POST_LINK="$OSEROOT/bin/$HOST/lm_post_link"
-
-# * `erl_xcomp_ose_LM_SET_CONF` - OSE load module configuration tool
-erl_xcomp_ose_LM_SET_CONF="$OSEROOT/bin/$HOST/lm_set_conf"
-
-# * `erl_xcomp_ose_LM_GET_CONF` - OSE load module elf size tool
-erl_xcomp_ose_LM_ELF_SIZE="$OSEROOT/bin/$HOST/lm_elf_size"
-
-# * `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file
-erl_xcomp_ose_LM_LCF="${ERL_TOP}/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf"
-
-# * `erl_xcomp_ose_LM_CONF` - OSE load module default configuration file
-erl_xcomp_ose_LM_CONF="${ERL_TOP}/erts/emulator/sys/ose/default.lmconf"
-
-## -----------------------------------------------------------------------------