aboutsummaryrefslogtreecommitdiffstats
path: root/xcomp
diff options
context:
space:
mode:
authorBjörn-Egil Dahlberg <[email protected]>2012-08-31 14:59:43 +0200
committerBjörn-Egil Dahlberg <[email protected]>2012-08-31 14:59:43 +0200
commit91f8f903ae866d06332a6f2ef968b419339e6003 (patch)
tree6ab98b4cd60c4b73be8452619bae86cf90a79723 /xcomp
parent87c5ea0577267fd17bcc572ab81bdac030dd8332 (diff)
parent2d03ab7ffde828d3b56f8b7738fd0c00d0f5b630 (diff)
downloadotp-91f8f903ae866d06332a6f2ef968b419339e6003.tar.gz
otp-91f8f903ae866d06332a6f2ef968b419339e6003.tar.bz2
otp-91f8f903ae866d06332a6f2ef968b419339e6003.zip
Merge branch 'maint'
Conflicts: lib/diameter/autoconf/vxworks/sed.general xcomp/README.md
Diffstat (limited to 'xcomp')
-rw-r--r--[l---------]xcomp/README.md560
-rw-r--r--xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf2
-rw-r--r--xcomp/erl-xcomp-mips-linux.conf2
-rw-r--r--xcomp/erl-xcomp-powerpc-dso-linux-gnu.conf2
-rw-r--r--xcomp/erl-xcomp-vars.sh2
-rw-r--r--xcomp/erl-xcomp-vxworks_ppc32.conf2
-rw-r--r--xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf2
-rw-r--r--xcomp/erl-xcomp.conf.template2
8 files changed, 566 insertions, 8 deletions
diff --git a/xcomp/README.md b/xcomp/README.md
index d08b3160ba..768efc9c7d 120000..100644
--- a/xcomp/README.md
+++ b/xcomp/README.md
@@ -1 +1,559 @@
-../HOWTO/INSTALL-CROSS.md \ No newline at end of file
+Cross Compiling Erlang/OTP
+==========================
+
+Introduction
+------------
+
+This document describes how to cross compile Erlang/OTP-%OTP-REL%. Note that
+the support for cross compiling Erlang/OTP should be considered as
+experimental. As far as we know, the %OTP-REL% release should cross compile
+fine, but since we currently have a very limited set of cross compilation
+environments to test with we cannot be sure. The cross compilation support
+will remain in an experimental state until we get a lot more cross compilation
+environments to test with.
+
+You are advised to read the whole document before attempting to cross
+compile Erlang/OTP. However, before reading this document, you should read
+the [$ERL_TOP/INSTALL.md][] document which describes building and installing
+Erlang/OTP in general. `$ERL_TOP` is the top directory in the source tree.
+
+### otp\_build Versus configure/make ###
+
+Building Erlang/OTP can be done either by using the `$ERL_TOP/otp_build`
+script, or by invoking `$ERL_TOP/configure` and `make` directly. Building using
+`otp_build` is easier since it involves fewer steps, but the `otp_build` build
+procedure is not as flexible as the `configure`/`make` build procedure. Note
+that `otp_build configure` will produce a default configuration that differs
+from what `configure` will produce by default. For example, currently
+`--disable-dynamic-ssl-lib` is added to the `configure` command line arguments
+unless `--enable-dynamic-ssl-lib` has been explicitly passed. The binary
+releases that we deliver are built using `otp_build`. The defaults used by
+`otp_build configure` may change at any time without prior notice.
+
+### Cross Configuration ###
+
+The `$ERL_TOP/xcomp/erl-xcomp.conf.template` file contains all available cross
+configuration variables and can be used as a template when creating a cross
+compilation configuration. All [cross configuration variables][] are also
+listed at the end of this document. For examples of working cross
+configurations see the `$ERL_TOP/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf`
+file and the `$ERL_TOP/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf` file. If the
+default behavior of a variable is satisfactory, the variable does not need to
+be set. However, the `configure` script will issue a warning when a default
+value is used. When a variable has been set, no warning will be issued.
+
+A cross configuration file can be passed to `otp_build configure` using the
+`--xcomp-conf` command line argument. Note that `configure` does not accept
+this command line argument. When using the `configure` script directly, pass
+the configuration variables as arguments to `configure` using a
+`<VARIABLE>=<VALUE>` syntax. Variables can also be passed as environment
+variables to `configure`. However, if you pass the configuration in the
+environment, make sure to unset all of these environment variables before
+invoking `make`; otherwise, the environment variables might set make variables
+in some applications, or parts of some applications, and you may end up with
+an erroneously configured build.
+
+### What can be Cross Compiled? ###
+
+All Erlang/OTP applications except the `wx` application can be cross compiled.
+The build of the `wx` driver will currently be automatically disabled when
+cross compiling.
+
+### Compatibility ###
+
+The build system, including cross compilation configuration variables used,
+may be subject to non backward compatible changes without prior notice.
+Current cross build system has been tested when cross compiling some Linux/GNU
+systems, but has only been partly tested for more esoteric platforms. The
+VxWorks example file is highly dependent on our environment and is here more
+or less only for internal use.
+
+### Patches ###
+
+Please submit any patches for cross compiling in a way consistent with this
+system. All input is welcome as we have a very limited set of cross compiling
+environments to test with. If a new configuration variable is needed, add it
+to `$ERL_TOP/xcomp/erl-xcomp.conf.template`, and use it in `configure.in`.
+Other files that might need to be updated are:
+
+- `$ERL_TOP/xcomp/erl-xcomp-vars.sh`
+- `$ERL_TOP/erl-build-tool-vars.sh`
+- `$ERL_TOP/erts/aclocal.m4`
+- `$ERL_TOP/xcomp/README.md`
+- `$ERL_TOP/xcomp/erl-xcomp-*.conf`
+
+Note that this might be an incomplete list of files that need to be updated.
+
+General information on how to submit patches can be found at:
+ <http://wiki.github.com/erlang/otp/submitting-patches>
+
+Build and Install Procedure
+---------------------------
+
+If you are building in Git, you want to read the [Building in Git][] section
+of [$ERL_TOP/INSTALL.md][] before proceeding.
+
+We will first go through the `configure`/`make` build procedure which people
+probably are most familiar with.
+
+### Building With configure/make Directly ###
+
+ (1)
+
+Change directory into the top directory of the Erlang/OTP source tree.
+
+ $ cd $ERL_TOP
+
+In order to compile Erlang code, a small Erlang bootstrap system has to be
+built, or an Erlang/OTP system of the same release as the one being built
+has to be provided in the `$PATH`. The Erlang/OTP for the target system will
+be built using this Erlang system, together with the cross compilation tools
+provided.
+
+If you want to build the documentation out of the same source tree as you are
+cross compiling in, you currently need a full Erlang/OTP system of the same
+release as the one being built for the build machine. If this is the case,
+build and install one for the build machine (or use one already built) and add
+it to the `$PATH` before cross building, and building the documentation. See
+the [How to Build the Documentation][] section in the [$ERL_TOP/INSTALL.md][]
+document for information on how to build the documentation.
+
+If you want to build using a compatible Erlang/OTP system in the `$PATH`,
+jump to (3).
+
+#### Building a Bootstrap System ####
+
+ (2)
+
+ $ ./configure --enable-bootstrap-only
+ $ make
+
+The `--enable-bootstrap-only` argument to `configure` isn't strictly necessary,
+but will speed things up. It will only run `configure` in applications
+necessary for the bootstrap, and will disable a lot of things not needed by
+the bootstrap system. If you run `configure` without `--enable-boostrap-only`
+you also have to run make as `make bootstrap`; otherwise, the whole system will
+be built.
+
+#### Cross Building the System ####
+
+ (3)
+
+ $ ./configure --host=<HOST> --build=<BUILD> [Other Config Args]
+ $ make
+
+`<HOST>` is the host/target system that you build for. It does not have to be
+a full `CPU-VENDOR-OS` triplet, but can be. The full `CPU-VENDOR-OS` triplet
+will be created by executing `$ERL_TOP/erts/autoconf/config.sub <HOST>`. If
+`config.sub` fails, you need to be more specific.
+
+`<BUILD>` should equal the `CPU-VENDOR-OS` triplet of the system that you
+build on. If you execute `$ERL_TOP/erts/autoconf/config.guess`, it will in
+most cases print the triplet you want to use for this.
+
+Pass the cross compilation variables as command line arguments to `configure`
+using a `<VARIABLE>=<VALUE>` syntax.
+
+> *NOTE*: You can *not* pass a configuration file using the `--xcomp-conf`
+> argument when you invoke `configure` directly. The `--xcomp-conf` argument
+> can only be passed to `otp_build configure`.
+
+`make` will verify that the Erlang/OTP system used when building is of the
+same release as the system being built, and will fail if this is not the case.
+It is possible, however not recommended, to force the cross compilation even
+though the wrong Erlang/OTP system is used. This by invoking `make` like this:
+`make ERL_XCOMP_FORCE_DIFFERENT_OTP=yes`.
+
+> *WARNING*: Invoking `make ERL_XCOMP_FORCE_DIFFERENT_OTP=yes` might fail,
+> silently produce suboptimal code, or silently produce erroneous code.
+
+#### Installing ####
+
+You can either install using the installation paths determined by `configure`
+(4), or install manually using (5).
+
+##### Installing Using Paths Determined by configure #####
+
+ (4)
+
+ $ make install DESTDIR=<TEMPORARY_PREFIX>
+
+`make install` will install at a location specified when doing `configure`.
+`configure` arguments specifying where the installation should reside are for
+example: `--prefix`, `--exec-prefix`, `--libdir`, `--bindir`, etc. By default
+it will install under `/usr/local`. You typically do not want to install your
+cross build under `/usr/local` on your build machine. Using [DESTDIR][]
+will cause the installation paths to be prefixed by `$DESTDIR`. This makes it
+possible to install and package the installation on the build machine without
+having to place the installation in the same directory on the build machine as
+it should be executed from on the target machine.
+
+When `make install` has finished, change directory into `$DESTDIR`, package
+the system, move it to the target machine, and unpack it. Note that the
+installation will only be working on the target machine at the location
+determined by `configure`.
+
+##### Installing Manually #####
+
+ (5)
+
+ $ make release RELEASE_ROOT=<RELEASE_DIR>
+
+`make release` will copy what you have built for the target machine to
+`<RELEASE_DIR>`. The `Install` script will not be run. The content of
+`<RELEASE_DIR>` is what by default ends up in `/usr/local/lib/erlang`.
+
+The `Install` script used when installing Erlang/OTP requires common Unix
+tools such as `sed` to be present in your `$PATH`. If your target system
+does not have such tools, you need to run the `Install` script on your
+build machine before packaging Erlang/OTP. The `Install` script should
+currently be invoked as follows in the directory where it resides
+(the top directory):
+
+ $ ./Install [-cross] [-minimal|-sasl] <ERL_ROOT>
+
+where:
+
+* `-minimal` Creates an installation that starts up a minimal amount
+ of applications, i.e., only `kernel` and `stdlib` are started. The
+ minimal system is normally enough, and is what `make install` uses.
+* `-sasl` Creates an installation that also starts up the `sasl`
+ application.
+* `-cross` For cross compilation. Informs the install script that it
+ is run on the build machine.
+* `<ERL_ROOT>` - The absolute path to the Erlang installation to use
+ at run time. This is often the same as the current working directory,
+ but does not have to be. It can follow any other path through the file
+ system to the same directory.
+
+If neither `-minimal`, nor `-sasl` is passed as argument you will be
+prompted.
+
+You can now either do:
+
+ (6)
+
+* Decide where the installation should be located on the target machine,
+ run the `Install` script on the build machine, and package the installed
+ installation. The installation just need to be unpacked at the right
+ location on the target machine:
+
+ $ cd <RELEASE_DIR>
+ $ ./Install -cross [-minimal|-sasl] <ABSOLUTE_INSTALL_DIR_ON_TARGET>
+
+or:
+
+ (7)
+
+* Package the installation in `<RELEASE_DIR>`, place it wherever you want
+ on your target machine, and run the `Install` script on your target
+ machine:
+
+ $ cd <ABSOLUTE_INSTALL_DIR_ON_TARGET>
+ $ ./Install [-minimal|-sasl] <ABSOLUTE_INSTALL_DIR_ON_TARGET>
+
+### Building With the otp\_build Script ###
+
+ (8)
+
+ $ cd $ERL_TOP
+
+ (9)
+
+ $ ./otp_build configure --xcomp-conf=<FILE> [Other Config Args]
+
+alternatively:
+
+ $ ./otp_build configure --host=<HOST> --build=<BUILD> [Other Config Args]
+
+If you have your cross compilation configuration in a file, pass it using the
+`--xcomp-conf=<FILE>` command line argument. If not, pass `--host=<HOST>`,
+`--build=<BUILD>`, and the configuration variables using a `<VARIABLE>=<VALUE>`
+syntax on the command line (same as in (3)). Note that `<HOST>` and `<BUILD>`
+have to be passed one way or the other; either by using `erl_xcomp_host=<HOST>`
+and `erl_xcomp_build=<BUILD>` in the configuration file, or by using the
+`--host=<HOST>`, and `--build=<BUILD>` command line arguments.
+
+`otp_build configure` will configure both for the boostrap system on the
+build machine and the cross host system.
+
+ (10)
+
+ $ ./otp_build boot -a
+
+`otp_build boot -a` will first build a bootstrap system for the build machine
+and then do the cross build of the system.
+
+ (11)
+
+ $ ./otp_build release -a <RELEASE_DIR>
+
+`otp_build release -a` will do the same as (5), and you will after this have
+to do a manual install either by doing (6), or (7).
+
+Testing the cross compiled system
+--------------------------------------
+Some of the tests that come with erlang use native code to test. This means
+that when cross compiling erlang you also have to cross compile test suites
+in order to run tests on the target host. To do this you first have to release
+the tests as usual.
+
+ $ make release_tests
+
+or
+
+ $ ./otp_build tests
+
+The tests will be released into `$ERL_TOP/release/tests`. After releasing the
+tests you have to install the tests on the build machine. You supply the same
+xcomp file as to `./otp_build` in (9).
+
+ $ cd $ERL_TOP/release/tests/test_server/
+ $ $ERL_TOP/bootstrap/bin/erl -eval 'ts:install([{xcomp,"<FILE>"}])' -s ts compile_testcases -s init stop
+
+You should get a lot of printouts as the testcases are compiled. Once done you
+should copy the entire `$ERL_TOP/release/tests` folder to the cross host system.
+
+Then go to the cross host system and setup the erlang installed in (4) or (5)
+to be in your `$PATH`. Then go to what previously was
+`$ERL_TOP/release/tests/test_server` and issue the following command.
+
+ $ erl -s ts install -s ts run all_tests -s init stop
+
+The configure should be skipped and all tests should hopefully pass. For more
+details about how to use ts run `erl -s ts help -s init stop`
+
+Currently Used Configuration Variables
+--------------------------------------
+
+Note that you cannot define arbitrary variables in a cross compilation
+configuration file. Only the ones listed below will be guaranteed to be
+visible throughout the whole execution of all `configure` scripts. Other
+variables needs to be defined as arguments to `configure` or exported in
+the environment.
+
+### Variables for otp\_build Only ###
+
+Variables in this section are only used, when configuring Erlang/OTP for
+cross compilation using `$ERL_TOP/otp_build configure`.
+
+> *NOTE*: These variables currently have *no* effect if you configure using
+> the `configure` script directly.
+
+* `erl_xcomp_build` - The build system used. This value will be passed as
+ `--build=$erl_xcomp_build` argument to the `configure` script. It does
+ not have to be a full `CPU-VENDOR-OS` triplet, but can be. The full
+ `CPU-VENDOR-OS` triplet will be created by
+ `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build`. If set to `guess`,
+ the build system will be guessed using
+ `$ERL_TOP/erts/autoconf/config.guess`.
+
+* `erl_xcomp_host` - Cross host/target system to build for. This value will
+ be passed as `--host=$erl_xcomp_host` argument to the `configure` script.
+ It does not have to be a full `CPU-VENDOR-OS` triplet, but can be. The
+ full `CPU-VENDOR-OS` triplet will be created by
+ `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host`.
+
+* `erl_xcomp_configure_flags` - Extra configure flags to pass to the
+ `configure` script.
+
+### Cross Compiler and Other Tools ###
+
+If the cross compilation tools are prefixed by `<HOST>-` you probably do
+not need to set these variables (where `<HOST>` is what has been passed as
+`--host=<HOST>` argument to `configure`).
+
+All variables in this section can also be used when native compiling.
+
+* `CC` - C compiler.
+
+* `CFLAGS` - C compiler flags.
+
+* `STATIC_CFLAGS` - Static C compiler flags.
+
+* `CFLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library
+ search path for the shared libraries. Note that this actually is a
+ linker flag, but it needs to be passed via the compiler.
+
+* `CPP` - C pre-processor.
+
+* `CPPFLAGS` - C pre-processor flags.
+
+* `CXX` - C++ compiler.
+
+* `CXXFLAGS` - C++ compiler flags.
+
+* `LD` - Linker.
+
+* `LDFLAGS` - Linker flags.
+
+* `LIBS` - Libraries.
+
+#### Dynamic Erlang Driver Linking ####
+
+> *NOTE*: Either set all or none of the `DED_LD*` variables.
+
+* `DED_LD` - Linker for Dynamically loaded Erlang Drivers.
+
+* `DED_LDFLAGS` - Linker flags to use with `DED_LD`.
+
+* `DED_LD_FLAG_RUNTIME_LIBRARY_PATH` - This flag should set runtime library
+ search path for shared libraries when linking with `DED_LD`.
+
+#### Large File Support ####
+
+> *NOTE*: Either set all or none of the `LFS_*` variables.
+
+* `LFS_CFLAGS` - Large file support C compiler flags.
+
+* `LFS_LDFLAGS` - Large file support linker flags.
+
+* `LFS_LIBS` - Large file support libraries.
+
+#### Other Tools ####
+
+* `RANLIB` - `ranlib` archive index tool.
+
+* `AR` - `ar` archiving tool.
+
+* `GETCONF` - `getconf` system configuration inspection tool. `getconf` is
+ currently used for finding out large file support flags to use, and
+ on Linux systems for finding out if we have an NPTL thread library or
+ not.
+
+### Cross System Root Locations ###
+
+* `erl_xcomp_sysroot` - The absolute path to the system root of the cross
+ compilation environment. Currently, the `crypto`, `odbc`, `ssh` and
+ `ssl` applications need the system root. These applications will be
+ skipped if the system root has not been set. The system root might be
+ needed for other things too. If this is the case and the system root
+ has not been set, `configure` will fail and request you to set it.
+
+* `erl_xcomp_isysroot` - The absolute path to the system root for includes
+ of the cross compilation environment. If not set, this value defaults
+ to `$erl_xcomp_sysroot`, i.e., only set this value if the include system
+ root path is not the same as the system root path.
+
+### Optional Feature, and Bug Tests ###
+
+These tests cannot (always) be done automatically when cross compiling. You
+usually do not need to set these variables.
+
+> *WARNING*: Setting these variables wrong may cause hard to detect
+> runtime errors. If you need to change these values, *really* make sure
+> that the values are correct.
+
+> *NOTE*: Some of these values will override results of tests performed
+> by `configure`, and some will not be used until `configure` is sure that
+> it cannot figure the result out.
+
+The `configure` script will issue a warning when a default value is used.
+When a variable has been set, no warning will be issued.
+
+* `erl_xcomp_after_morecore_hook` - `yes|no`. Defaults to `no`. If `yes`,
+ the target system must have a working `__after_morecore_hook` that can be
+ used for tracking used `malloc()` implementations core memory usage.
+ This is currently only used by unsupported features.
+
+* `erl_xcomp_bigendian` - `yes|no`. No default. If `yes`, the target system
+ must be big endian. If `no`, little endian. This can often be
+ automatically detected, but not always. If not automatically detected,
+ `configure` will fail unless this variable is set. Since no default
+ value is used, `configure` will try to figure this out automatically.
+
+* `erl_xcomp_double_middle` - `yes|no`. Defaults to `no`.
+ If `yes`, the target system must have doubles in "middle-endian" format. If
+ `no`, it has "regular" endianness.
+
+* `erl_xcomp_clock_gettime_cpu_time` - `yes|no`. Defaults to `no`. If `yes`,
+ the target system must have a working `clock_gettime()` implementation
+ that can be used for retrieving process CPU time.
+
+* `erl_xcomp_getaddrinfo` - `yes|no`. Defaults to `no`. If `yes`, the target
+ system must have a working `getaddrinfo()` implementation that can
+ handle both IPv4 and IPv6.
+
+* `erl_xcomp_gethrvtime_procfs_ioctl` - `yes|no`. Defaults to `no`. If `yes`,
+ the target system must have a working `gethrvtime()` implementation and
+ is used with procfs `ioctl()`.
+
+* `erl_xcomp_dlsym_brk_wrappers` - `yes|no`. Defaults to `no`. If `yes`, the
+ target system must have a working `dlsym(RTLD_NEXT, <S>)` implementation
+ that can be used on `brk` and `sbrk` symbols used by the `malloc()`
+ implementation in use, and by this track the `malloc()` implementations
+ core memory usage. This is currently only used by unsupported features.
+
+* `erl_xcomp_kqueue` - `yes|no`. Defaults to `no`. If `yes`, the target
+ system must have a working `kqueue()` implementation that returns a file
+ descriptor which can be used by `poll()` and/or `select()`. If `no` and
+ the target system has not got `epoll()` or `/dev/poll`, the kernel-poll
+ feature will be disabled.
+
+* `erl_xcomp_linux_clock_gettime_correction` - `yes|no`. Defaults to `yes` on
+ Linux; otherwise, `no`. If `yes`, `clock_gettime(CLOCK_MONOTONIC, _)` on
+ the target system must work. This variable is recommended to be set to
+ `no` on Linux systems with kernel versions less than 2.6.
+
+* `erl_xcomp_linux_nptl` - `yes|no`. Defaults to `yes` on Linux; otherwise,
+ `no`. If `yes`, the target system must have NPTL (Native POSIX Thread
+ Library). Older Linux systems have LinuxThreads instead of NPTL (Linux
+ kernel versions typically less than 2.6).
+
+* `erl_xcomp_linux_usable_sigaltstack` - `yes|no`. Defaults to `yes` on Linux;
+ otherwise, `no`. If `yes`, `sigaltstack()` must be usable on the target
+ system. `sigaltstack()` on Linux kernel versions less than 2.4 are
+ broken.
+
+* `erl_xcomp_linux_usable_sigusrx` - `yes|no`. Defaults to `yes`. If `yes`,
+ the `SIGUSR1` and `SIGUSR2` signals must be usable by the ERTS. Old
+ LinuxThreads thread libraries (Linux kernel versions typically less than
+ 2.2) used these signals and made them unusable by the ERTS.
+
+* `erl_xcomp_poll` - `yes|no`. Defaults to `no` on Darwin/MacOSX; otherwise,
+ `yes`. If `yes`, the target system must have a working `poll()`
+ implementation that also can handle devices. If `no`, `select()` will be
+ used instead of `poll()`.
+
+* `erl_xcomp_putenv_copy` - `yes|no`. Defaults to `no`. If `yes`, the target
+ system must have a `putenv()` implementation that stores a copy of the
+ key/value pair.
+
+* `erl_xcomp_reliable_fpe` - `yes|no`. Defaults to `no`. If `yes`, the target
+ system must have reliable floating point exceptions.
+
+Copyright and License
+---------------------
+
+%CopyrightBegin%
+
+Copyright Ericsson AB 2009-2012. All Rights Reserved.
+
+The contents of this file are subject to the Erlang Public License,
+Version 1.1, (the "License"); you may not use this file except in
+compliance with the License. You should have received a copy of the
+Erlang Public License along with this software. If not, it can be
+retrieved online at http://www.erlang.org/.
+
+Software distributed under the License is distributed on an "AS IS"
+basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+the License for the specific language governing rights and limitations
+under the License.
+
+%CopyrightEnd%
+
+Modifying This Document
+-----------------------
+
+Before modifying this document you need to have a look at the
+`$ERL_TOP/README.md.txt` document.
+
+
+
+ [$ERL_TOP/INSTALL.md]: INSTALL
+ [Building in Git]: INSTALL#How-to-Build-and-Install-ErlangOTP_Building-in-Git
+ [How to Build the Documentation]: INSTALL#The-ErlangOTP-Documentation_How-to-Build-the-Documentation
+ [cross configuration variables]: #Currently-Used-Configuration-Variables
+ [DESTDIR]: http://www.gnu.org/prep/standards/html_node/DESTDIR.html
+
+ [?TOC]: true
diff --git a/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf b/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf
index 287cb787d9..84bf735ff2 100644
--- a/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf
+++ b/xcomp/erl-xcomp-TileraMDE2.0-tilepro.conf
@@ -2,7 +2,7 @@
##
## %CopyrightBegin%
##
-## Copyright Ericsson AB 2009-2010. All Rights Reserved.
+## Copyright Ericsson AB 2009-2012. All Rights Reserved.
##
## The contents of this file are subject to the Erlang Public License,
## Version 1.1, (the "License"); you may not use this file except in
diff --git a/xcomp/erl-xcomp-mips-linux.conf b/xcomp/erl-xcomp-mips-linux.conf
index 2195b7d6e9..e031bdcd26 100644
--- a/xcomp/erl-xcomp-mips-linux.conf
+++ b/xcomp/erl-xcomp-mips-linux.conf
@@ -2,7 +2,7 @@
##
## %CopyrightBegin%
##
-## Copyright Ericsson AB 2010. All Rights Reserved.
+## Copyright Ericsson AB 2010-2012. All Rights Reserved.
##
## The contents of this file are subject to the Erlang Public License,
## Version 1.1, (the "License"); you may not use this file except in
diff --git a/xcomp/erl-xcomp-powerpc-dso-linux-gnu.conf b/xcomp/erl-xcomp-powerpc-dso-linux-gnu.conf
index 735c986486..0e0c2f2337 100644
--- a/xcomp/erl-xcomp-powerpc-dso-linux-gnu.conf
+++ b/xcomp/erl-xcomp-powerpc-dso-linux-gnu.conf
@@ -2,7 +2,7 @@
##
## %CopyrightBegin%
##
-## Copyright Ericsson AB 2009-2010. All Rights Reserved.
+## Copyright Ericsson AB 2009-2012. All Rights Reserved.
##
## The contents of this file are subject to the Erlang Public License,
## Version 1.1, (the "License"); you may not use this file except in
diff --git a/xcomp/erl-xcomp-vars.sh b/xcomp/erl-xcomp-vars.sh
index 168b25262a..eccdff47e3 100644
--- a/xcomp/erl-xcomp-vars.sh
+++ b/xcomp/erl-xcomp-vars.sh
@@ -1,7 +1,7 @@
#
# %CopyrightBegin%
#
-# Copyright Ericsson AB 2010. All Rights Reserved.
+# Copyright Ericsson AB 2010-2012. All Rights Reserved.
#
# The contents of this file are subject to the Erlang Public License,
# Version 1.1, (the "License"); you may not use this file except in
diff --git a/xcomp/erl-xcomp-vxworks_ppc32.conf b/xcomp/erl-xcomp-vxworks_ppc32.conf
index bea4b3e374..7424cee496 100644
--- a/xcomp/erl-xcomp-vxworks_ppc32.conf
+++ b/xcomp/erl-xcomp-vxworks_ppc32.conf
@@ -2,7 +2,7 @@
##
## %CopyrightBegin%
##
-## Copyright Ericsson AB 2009-2010. All Rights Reserved.
+## Copyright Ericsson AB 2009-2012. All Rights Reserved.
##
## The contents of this file are subject to the Erlang Public License,
## Version 1.1, (the "License"); you may not use this file except in
diff --git a/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf b/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf
index de9118ae30..d5b9d8c469 100644
--- a/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf
+++ b/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf
@@ -2,7 +2,7 @@
##
## %CopyrightBegin%
##
-## Copyright Ericsson AB 2010. All Rights Reserved.
+## Copyright Ericsson AB 2010-2012. All Rights Reserved.
##
## The contents of this file are subject to the Erlang Public License,
## Version 1.1, (the "License"); you may not use this file except in
diff --git a/xcomp/erl-xcomp.conf.template b/xcomp/erl-xcomp.conf.template
index c215f0fb13..7d70332cef 100644
--- a/xcomp/erl-xcomp.conf.template
+++ b/xcomp/erl-xcomp.conf.template
@@ -2,7 +2,7 @@
##
## %CopyrightBegin%
##
-## Copyright Ericsson AB 2009-2010. All Rights Reserved.
+## Copyright Ericsson AB 2009-2012. All Rights Reserved.
##
## The contents of this file are subject to the Erlang Public License,
## Version 1.1, (the "License"); you may not use this file except in