Merge branch 'lukas/ose/master/OTP-11334'

* lukas/ose/master/OTP-11334: (71 commits)
  erts: Fix unix efile assert
  ose: Use -O2 when building
  ose: Expand OSE docs
  ose: Add dummy ttsl driver
  ose: Cleanup cleanup of mutex selection defines
  ose: Polish mmap configure checks
  ose: Add ose specific x-compile flags
  ose: Updating fd_driver and spawn_driver for OSE
  ose: Updating event and signal API for OSE
  ose: Cleanup of mutex selection defines
  win32: Compile erl_log.exe
  ose: Remove uneccesary define
  ose: Fix ssl configure test for osx
  erts: Fix sys_msg_dispatcher assert
  ose: Fix broken doc links
  ose: Thread priorities configurable from lmconf
  ose: Yielding the cpu is done "the OSE" way
  ose: Start using ppdata for tse key
  ose: Do not use spinlocks on OSE
  ose: Fix support for crypto
  ...

Conflicts:
	lib/crypto/c_src/crypto.c

4 files changed, 675 insertions, 1 deletions

diff --git a/xcomp/README.md b/xcomp/README.md
index 768efc9c7d..93cb51619c 100644
--- a/xcomp/README.md
+++ b/xcomp/README.md
@@ -522,6 +522,25 @@ When a variable has been set, no warning will be issued.
 *   `erl_xcomp_reliable_fpe` - `yes|no`. Defaults to `no`. If `yes`, the target
     system must have reliable floating point exceptions.
 
+*   `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1)
+
+*   `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2)
+
+*   `erl_xcomp_ose_OSEROOT` - OSE installation root directory
+
+*   `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution
+
+*   `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool
+
+*   `erl_xcomp_ose_LM_SET_CONF` - Sets the configuration for an OSE load module
+
+*   `erl_xcomp_ose_LM_ELF_SIZE` - Prints the section size information for an OSE load module
+
+*   `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file
+
+*   `erl_xcomp_ose_LM_CONF` - OSE load module default configuration file
+
+
 Copyright and License
 ---------------------
 
diff --git a/xcomp/erl-xcomp-powerpc-ose5.conf b/xcomp/erl-xcomp-powerpc-ose5.conf
new file mode 100644
index 0000000000..60b75b36c1
--- /dev/null
+++ b/xcomp/erl-xcomp-powerpc-ose5.conf
@@ -0,0 +1,351 @@
+## -*-shell-script-*-
+##
+## %CopyrightBegin%
+##
+## Copyright Ericsson AB 2009-2012. All Rights Reserved.
+##
+## The contents of this file are subject to the Erlang Public License,
+## Version 1.1, (the "License"); you may not use this file except in
+## compliance with the License. You should have received a copy of the
+## Erlang Public License along with this software. If not, it can be
+## retrieved online at http://www.erlang.org/.
+##
+## Software distributed under the License is distributed on an "AS IS"
+## basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+## the License for the specific language governing rights and limitations
+## under the License.
+##
+## %CopyrightEnd%
+##
+## File: erl-xcomp-sfk-linux-ose5.conf
+## Author: Petre Pircalabu
+##
+## -----------------------------------------------------------------------------
+## When cross compiling Erlang/OTP using `otp_build', copy this file and set
+## the variables needed below. Then pass the path to the copy of this file as
+## an argument to `otp_build' in the configure stage:
+##   `otp_build configure --xcomp-conf=<FILE>'
+## -----------------------------------------------------------------------------
+
+## Note that you cannot define arbitrary variables in a cross compilation
+## configuration file. Only the ones listed below will be guaranteed to be
+## visible throughout the whole execution of all `configure' scripts. Other
+## variables needs to be defined as arguments to `configure' or exported in
+## the environment.
+
+## -- Variables needed for an OSE5 build ---------------------------------------
+OSEROOT="/vobs/ose5/system"
+HOST="linux"
+
+GCCVERSION="4.4.3"
+GCCROOT="${OSEROOT}/gcc_linux_powerpc_${GCCVERSION}"
+
+OSEDEBUG="no"
+OSESSL="no"
+
+case ${GCCVERSION} in
+4.4.3)
+   GCCTARGET="powerpc-eabi"
+   ;;
+4.6.3)
+   GCCTARGET="powerpc-ose-eabi"
+   ;;
+*)
+   echo "Error: Unknown GCCVERSION: ${GCCVERSION}"
+   exit 1
+esac
+
+if [ ${OSEDEBUG} != "yes" ];
+then
+OPT_LEVEL="-O2"
+else
+OPT_LEVEL=""
+fi
+
+if [ ${OSESSL} = "yes" ];
+then
+## If your crypto is not in OSEROOT then you have to use --with-ssl to
+## point to the correct place. Also CRYPTO_LIB_PATH has to be modified to
+## point there as well.
+CRYPTO_CONFIG_OPTION="--disable-dynamic-ssl-lib"
+CRYPTO_NIF_PATH=",$ERL_TOP/lib/crypto/priv/lib/powerpc-unknown-ose/crypto.a"
+CRYPTO_LIB_PATH="${OSEROOT}/lib/powerpc/libsslcrypto.a"
+else
+CRYPTO_CONFIG_OPTION="--without-ssl"
+CRYPTO_NIF_PATH=""
+CRYPTO_LIB_PATH=""
+fi
+
+
+## -- Variables for `otp_build' Only -------------------------------------------
+
+## Variables in this section are only used, when configuring Erlang/OTP for
+## cross compilation using `$ERL_TOP/otp_build configure'.
+
+## *NOTE*! These variables currently have *no* effect if you configure using
+## the `configure' script directly.
+
+# * `erl_xcomp_build' - The build system used. This value will be passed as
+#   `--build=$erl_xcomp_build' argument to the `configure' script. It does
+#   not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full
+#   `CPU-VENDOR-OS' triplet will be created by
+#   `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess',
+#   the build system will be guessed using
+#   `$ERL_TOP/erts/autoconf/config.guess'.
+erl_xcomp_build=guess
+
+# * `erl_xcomp_host' - Cross host/target system to build for. This value will
+#   be passed as `--host=$erl_xcomp_host' argument to the `configure' script.
+#   It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The
+#   full `CPU-VENDOR-OS' triplet will be created by
+#   `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'.
+erl_xcomp_host="powerpc-ose"
+
+disabled_apps="--without-erl_interface --without-os_mon --without-megaco --without-observer --without-wx --without-appmon --without-cosEvent --without-cosEventDomain --without-cosFileTransfer --without-cosNotification --without-cosProperty --without-cosTime --without-cosTransactions --without-debugger --without-dialyzer --without-edoc --without-erl_docgen --without-eunit --without-gs --without-hipe --without-ic --without-orber --without-pman --without-toolbar --without-tv --without-webtool --without-typer"
+
+# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the
+#   `configure' script.
+erl_xcomp_configure_flags="${CRYPTO_CONFIG_OPTION} --disable-kernel-poll --disable-hipe --without-termcap --without-javac ${disabled_apps} --enable-static-nifs=$ERL_TOP/lib/asn1/priv/lib/powerpc-unknown-ose/asn1rt_nif.a${CRYPTO_NIF_PATH}"
+
+## -- Cross Compiler and Other Tools -------------------------------------------
+
+## If the cross compilation tools are prefixed by `<HOST>-' you probably do
+## not need to set these variables (where `<HOST>' is what has been passed as
+## `--host=<HOST>' argument to `configure').
+
+## All variables in this section can also be used when native compiling.
+
+# * `CC' - C compiler.
+CC="$GCCROOT/bin/$GCCTARGET-gcc"
+
+# * `CFLAGS' - C compiler flags.
+CFLAGS="-msoft-float -g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -mpowerpc -nostdlib -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DBIG_ENDIAN  -DCF_CONF_SIZE=0x800 ${OPT_LEVEL}"
+
+
+# * `STATIC_CFLAGS' - Static C compiler flags.
+#STATIC_CFLAGS=
+
+# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
+#   search path for the shared libraries. Note that this actually is a
+#   linker flag, but it needs to be passed via the compiler.
+#CFLAG_RUNTIME_LIBRARY_PATH=
+
+# * `CPP' - C pre-processor.
+CPP="$GCCROOT/bin/$GCCTARGET-cpp"
+
+# * `CPPFLAGS' - C pre-processor flags.
+CPPFLAGS="-msoft-float -g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -mpowerpc -nostdlib -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DBIG_ENDIAN -DCF_CONF_SIZE=0x800 ${OPT_LEVEL}"
+
+
+# * `CXX' - C++ compiler.
+CXX="$GCCROOT/bin/$GCCTARGET-g++"
+
+# * `CXXFLAGS' - C++ compiler flags.
+CXXFLAGS="-msoft-float -g -fno-strict-aliasing -ansi -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/gcc ${OPT_LEVEL}"
+
+# * `LD' - Linker.
+LD="${GCCROOT}/bin/${GCCTARGET}-ld"
+
+# * `LDFLAGS' - Linker flags.
+LDFLAGS="-Wl,-ecrt0_lm -Wl,-T,${ERL_TOP}/erts/emulator/sys/ose/gcc_${GCCVERSION}_lm_ppc.lcf"
+
+# * `LIBS' - Libraries.
+LIBS="${OSEROOT}/lib/powerpc/libcrt.a ${OSEROOT}/lib/powerpc/libm.a ${GCCROOT}/lib/gcc/${GCCTARGET}/${GCCVERSION}/nof/libgcc.a ${CRYPTO_LIB_PATH}"
+
+## -- *D*ynamic *E*rlang *D*river Linking --
+
+## *NOTE*! Either set all or none of the `DED_LD*' variables.
+
+# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers.
+DED_LD=
+
+# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'.
+DED_LDFLAGS=
+
+# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
+#   search path for shared libraries when linking with `DED_LD'.
+DED_LD_FLAG_RUNTIME_LIBRARY_PATH=
+
+## -- Large File Support --
+
+## *NOTE*! Either set all or none of the `LFS_*' variables.
+
+# * `LFS_CFLAGS' - Large file support C compiler flags.
+#LFS_CFLAGS=
+
+# * `LFS_LDFLAGS' - Large file support linker flags.
+#LFS_LDFLAGS=
+
+# * `LFS_LIBS' - Large file support libraries.
+#LFS_LIBS=
+
+## -- Other Tools --
+
+# * `RANLIB' - `ranlib' archive index tool.
+RANLIB="$GCCROOT/bin/$GCCTARGET-ranlib"
+
+# * `AR' - `ar' archiving tool.
+AR="$GCCROOT/bin/$GCCTARGET-ar"
+
+# * `STRIP' - `strip
+STRIP="$GCCROOT/bin/$GCCTARGET-strip"
+
+# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is
+#   currently used for finding out large file support flags to use, and
+#   on Linux systems for finding out if we have an NPTL thread library or
+#   not.
+#GETCONF=
+
+## -- Cross System Root Locations ----------------------------------------------
+
+# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross
+#   compilation environment. Currently, the `crypto', `odbc', `ssh' and
+#   `ssl' applications need the system root. These applications will be
+#   skipped if the system root has not been set. The system root might be
+#   needed for other things too. If this is the case and the system root
+#   has not been set, `configure' will fail and request you to set it.
+erl_xcomp_sysroot="$OSEROOT"
+
+# * `erl_xcomp_isysroot' - The absolute path to the system root for includes
+#   of the cross compilation environment. If not set, this value defaults
+#   to `$erl_xcomp_sysroot', i.e., only set this value if the include system
+#   root path is not the same as the system root path.
+#erl_xcomp_isysroot="$OSEROOT"
+
+## -- Optional Feature, and Bug Tests ------------------------------------------
+
+## These tests cannot (always) be done automatically when cross compiling. You
+## usually do not need to set these variables. Only set these if you really
+## know what you are doing.
+
+## Note that some of these values will override results of tests performed
+## by `configure', and some will not be used until `configure' is sure that
+## it cannot figure the result out.
+
+## The `configure' script will issue a warning when a default value is used.
+## When a variable has been set, no warning will be issued.
+
+# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes',
+#   the target system must have a working `__after_morecore_hook' that can be
+#   used for tracking used `malloc()' implementations core memory usage.
+#   This is currently only used by unsupported features.
+#erl_xcomp_after_morecore_hook=
+
+# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system
+#   must be big endian. If `no', little endian. This can often be
+#   automatically detected, but not always. If not automatically detected,
+#   `configure' will fail unless this variable is set. Since no default
+#   value is used, `configure' will try to figure this out automatically.
+#erl_xcomp_bigendian=
+
+# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the
+#   target system must have doubles in "middle-endian" format. If
+#   `no`, it has "regular" endianness. This can often be automatically
+#   detected, but not always. If not automatically detected,
+#   `configure` will fail unless this variable is set. Since no
+#   default value is used, `configure` will try to figure this out
+#   automatically.
+#erl_xcomp_double_middle_endian
+
+# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes',
+#   the target system must have a working `clock_gettime()' implementation
+#   that can be used for retrieving process CPU time.
+#erl_xcomp_clock_gettime_cpu_time=
+
+# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target
+#   system must have a working `getaddrinfo()' implementation that can
+#   handle both IPv4 and IPv6.
+#erl_xcomp_getaddrinfo=
+
+# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes',
+#   the target system must have a working `gethrvtime()' implementation and
+#   is used with procfs `ioctl()'.
+#erl_xcomp_gethrvtime_procfs_ioctl=
+
+# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the
+#   target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation
+#   that can be used on `brk' and `sbrk' symbols used by the `malloc()'
+#   implementation in use, and by this track the `malloc()' implementations
+#   core memory usage. This is currently only used by unsupported features.
+#erl_xcomp_dlsym_brk_wrappers=
+
+# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target
+#   system must have a working `kqueue()' implementation that returns a file
+#   descriptor which can be used by `poll()' and/or `select()'. If `no' and
+#   the target system has not got `epoll()' or `/dev/poll', the kernel-poll
+#   feature will be disabled.
+#erl_xcomp_kqueue=
+
+# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on
+#   Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on
+#   the target system must work. This variable is recommended to be set to
+#   `no' on Linux systems with kernel versions less than 2.6.
+#erl_xcomp_linux_clock_gettime_correction=
+
+# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise,
+#   `no'. If `yes', the target system must have NPTL (Native POSIX Thread
+#   Library). Older Linux systems have LinuxThreads instead of NPTL (Linux
+#   kernel versions typically less than 2.6).
+#erl_xcomp_linux_nptl=
+
+# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux;
+#   otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target
+#   system. `sigaltstack()' on Linux kernel versions less than 2.4 are
+#   broken.
+#erl_xcomp_linux_usable_sigaltstack=
+
+# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes',
+#   the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old
+#   LinuxThreads thread libraries (Linux kernel versions typically less than
+#   2.2) used these signals and made them unusable by the ERTS.
+#erl_xcomp_linux_usable_sigusrx=
+
+# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise,
+#   `yes'. If `yes', the target system must have a working `poll()'
+#   implementation that also can handle devices. If `no', `select()' will be
+#   used instead of `poll()'.
+erl_xcomp_poll=no
+
+# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target
+#   system must have a `putenv()' implementation that stores a copy of the
+#   key/value pair.
+#erl_xcomp_putenv_copy=
+
+# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target
+#   system must have reliable floating point exceptions.
+#erl_xcomp_reliable_fpe=
+# * `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1)
+erl_xcomp_ose_ldflags_pass1="-r --no-omagic"
+
+# * `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2)
+erl_xcomp_ose_ldflags_pass2="-n --emit-relocs -ecrt0_lm --no-omagic"
+
+# * `erl_xcomp_ose_OSEROOT` - OSE installation root directory
+erl_xcomp_ose_OSEROOT="${OSEROOT}"
+
+# * `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution
+erl_xcomp_ose_STRIP="${GCCROOT}/bin/${GCCTARGET}-strip"
+
+# * `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool
+erl_xcomp_ose_LM_POST_LINK="${OSEROOT}/bin/${HOST}/lm_post_link"
+
+# * `erl_xcomp_ose_LM_SET_CONF` - Sets the configuration for an OSE load module
+erl_xcomp_ose_LM_SET_CONF="${OSEROOT}/bin/${HOST}/lm_set_conf"
+
+# * `erl_xcomp_ose_LM_ELF_SIZE` - OSE load module elf size tool
+erl_xcomp_ose_LM_ELF_SIZE="${OSEROOT}/bin/${HOST}/lm_elf_size"
+
+# * `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file
+erl_xcomp_ose_LM_LCF="${ERL_TOP}/erts/emulator/sys/ose/gcc_${GCCVERSION}_lm_ppc.lcf"
+
+# * `erl_xcomp_ose_LM_CONF` - OSE load module default configuration file
+erl_xcomp_ose_LM_CONF="${ERL_TOP}/erts/emulator/sys/ose/default.lmconf"
+
+# * `erl_xcomp_ose_CONFD` - OSE confd source file
+erl_xcomp_ose_CONFD="${OSEROOT}/src/ose_confd.c"
+
+# * `erl_xcomp_ose_CRT0_LM` - OSE crt0 lm source file
+erl_xcomp_ose_CRT0_LM="${OSEROOT}/src/crt0_lm.c"
+
+
+## -----------------------------------------------------------------------------
diff --git a/xcomp/erl-xcomp-sfk-linux-ose5.conf b/xcomp/erl-xcomp-sfk-linux-ose5.conf
new file mode 100644
index 0000000000..a9c06f3cb4
--- /dev/null
+++ b/xcomp/erl-xcomp-sfk-linux-ose5.conf
@@ -0,0 +1,304 @@
+## -*-shell-script-*-
+##
+## %CopyrightBegin%
+##
+## Copyright Ericsson AB 2009-2012. All Rights Reserved.
+##
+## The contents of this file are subject to the Erlang Public License,
+## Version 1.1, (the "License"); you may not use this file except in
+## compliance with the License. You should have received a copy of the
+## Erlang Public License along with this software. If not, it can be
+## retrieved online at http://www.erlang.org/.
+##
+## Software distributed under the License is distributed on an "AS IS"
+## basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+## the License for the specific language governing rights and limitations
+## under the License.
+##
+## %CopyrightEnd%
+##
+## File: erl-xcomp-sfk-linux-ose5.conf
+## Author: Petre Pircalabu
+##
+## -----------------------------------------------------------------------------
+## When cross compiling Erlang/OTP using `otp_build', copy this file and set
+## the variables needed below. Then pass the path to the copy of this file as
+## an argument to `otp_build' in the configure stage:
+##   `otp_build configure --xcomp-conf=<FILE>'
+## -----------------------------------------------------------------------------
+
+## Note that you cannot define arbitrary variables in a cross compilation
+## configuration file. Only the ones listed below will be guaranteed to be
+## visible throughout the whole execution of all `configure' scripts. Other
+## variables needs to be defined as arguments to `configure' or exported in
+## the environment.
+
+## -- Variables needed for an OSE5 build ---------------------------------------
+OSEROOT="/vobs/ose5/system"
+HOST="linux"
+GCCVERSION="4.6.3"
+GCCROOT="${OSEROOT}/gcc_linux_x86_${GCCVERSION}"
+GCCTARGET="i386-elf"
+
+## -- Variables for `otp_build' Only -------------------------------------------
+
+## Variables in this section are only used, when configuring Erlang/OTP for
+## cross compilation using `$ERL_TOP/otp_build configure'.
+
+## *NOTE*! These variables currently have *no* effect if you configure using
+## the `configure' script directly.
+
+# * `erl_xcomp_build' - The build system used. This value will be passed as
+#   `--build=$erl_xcomp_build' argument to the `configure' script. It does
+#   not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full
+#   `CPU-VENDOR-OS' triplet will be created by
+#   `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess',
+#   the build system will be guessed using
+#   `$ERL_TOP/erts/autoconf/config.guess'.
+erl_xcomp_build=guess
+
+# * `erl_xcomp_host' - Cross host/target system to build for. This value will
+#   be passed as `--host=$erl_xcomp_host' argument to the `configure' script.
+#   It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The
+#   full `CPU-VENDOR-OS' triplet will be created by
+#   `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'.
+erl_xcomp_host="$GCCTARGET-ose"
+
+# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the
+#   `configure' script.
+erl_xcomp_configure_flags="--disable-threads --disable-smp-support --disable-kernel-poll --disable-hipe --without-termcap --without-javac --disable-dynamic-ssl-lib --disable-shared-zlib --without-ssl --enable-static-nifs --enable-static-nifs=$ERL_TOP/lib/asn1/priv/lib/powerpc-unknown-ose/asn1rt_nif.a"
+
+## -- Cross Compiler and Other Tools -------------------------------------------
+
+## If the cross compilation tools are prefixed by `<HOST>-' you probably do
+## not need to set these variables (where `<HOST>' is what has been passed as
+## `--host=<HOST>' argument to `configure').
+
+## All variables in this section can also be used when native compiling.
+
+# * `CC' - C compiler.
+CC="$GCCROOT/bin/$GCCTARGET-gcc"
+
+# * `CFLAGS' - C compiler flags.
+CFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800"
+
+# * `STATIC_CFLAGS' - Static C compiler flags.
+#STATIC_CFLAGS=
+
+# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
+#   search path for the shared libraries. Note that this actually is a
+#   linker flag, but it needs to be passed via the compiler.
+#CFLAG_RUNTIME_LIBRARY_PATH=
+
+# * `CPP' - C pre-processor.
+#CPP=
+
+# * `CPPFLAGS' - C pre-processor flags.
+CPPFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800"
+
+# * `CXX' - C++ compiler.
+#CXX=
+
+# * `CXXFLAGS' - C++ compiler flags.
+CXXFLAGS="-g -fno-strict-aliasing -ansi -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/gcc "
+
+# * `LD' - Linker.
+LD="$GCCROOT/bin/$GCCTARGET-ld"
+
+# * `LDFLAGS' - Linker flags.
+LDFLAGS="-Wl,-ecrt0_lm -Wl,-T,$ERL_TOP/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf"
+
+# * `LIBS' - Libraries.
+LIBS="$OSEROOT/lib/x86/libcrt.a $OSEROOT/lib/x86/libm.a $GCCROOT/lib/gcc/$GCCTARGET/$GCCVERSION/libgcc.a"
+
+## -- *D*ynamic *E*rlang *D*river Linking --
+
+## *NOTE*! Either set all or none of the `DED_LD*' variables.
+
+# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers.
+#DED_LD=
+
+# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'.
+#DED_LDFLAGS=
+
+# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library
+#   search path for shared libraries when linking with `DED_LD'.
+#DED_LD_FLAG_RUNTIME_LIBRARY_PATH=
+
+## -- Large File Support --
+
+## *NOTE*! Either set all or none of the `LFS_*' variables.
+
+# * `LFS_CFLAGS' - Large file support C compiler flags.
+#LFS_CFLAGS=
+
+# * `LFS_LDFLAGS' - Large file support linker flags.
+#LFS_LDFLAGS=
+
+# * `LFS_LIBS' - Large file support libraries.
+#LFS_LIBS=
+
+## -- Other Tools --
+
+# * `RANLIB' - `ranlib' archive index tool.
+RANLIB="$GCCROOT/bin/$GCCTARGET-ranlib"
+
+# * `AR' - `ar' archiving tool.
+AR="$GCCROOT/bin/$GCCTARGET-ar"
+
+# * `STRIP' - `strip
+STRIP="$GCCROOT/bin/$GCCTARGET-strip"
+
+# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is
+#   currently used for finding out large file support flags to use, and
+#   on Linux systems for finding out if we have an NPTL thread library or
+#   not.
+#GETCONF=
+
+## -- Cross System Root Locations ----------------------------------------------
+
+# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross
+#   compilation environment. Currently, the `crypto', `odbc', `ssh' and
+#   `ssl' applications need the system root. These applications will be
+#   skipped if the system root has not been set. The system root might be
+#   needed for other things too. If this is the case and the system root
+#   has not been set, `configure' will fail and request you to set it.
+erl_xcomp_sysroot="$OSEROOT"
+
+# * `erl_xcomp_isysroot' - The absolute path to the system root for includes
+#   of the cross compilation environment. If not set, this value defaults
+#   to `$erl_xcomp_sysroot', i.e., only set this value if the include system
+#   root path is not the same as the system root path.
+erl_xcomp_isysroot="$OSEROOT/include"
+
+## -- Optional Feature, and Bug Tests ------------------------------------------
+
+## These tests cannot (always) be done automatically when cross compiling. You
+## usually do not need to set these variables. Only set these if you really
+## know what you are doing.
+
+## Note that some of these values will override results of tests performed
+## by `configure', and some will not be used until `configure' is sure that
+## it cannot figure the result out.
+
+## The `configure' script will issue a warning when a default value is used.
+## When a variable has been set, no warning will be issued.
+
+# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes',
+#   the target system must have a working `__after_morecore_hook' that can be
+#   used for tracking used `malloc()' implementations core memory usage.
+#   This is currently only used by unsupported features.
+#erl_xcomp_after_morecore_hook=
+
+# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system
+#   must be big endian. If `no', little endian. This can often be
+#   automatically detected, but not always. If not automatically detected,
+#   `configure' will fail unless this variable is set. Since no default
+#   value is used, `configure' will try to figure this out automatically.
+#erl_xcomp_bigendian=
+
+# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the
+#   target system must have doubles in "middle-endian" format. If
+#   `no`, it has "regular" endianness. This can often be automatically
+#   detected, but not always. If not automatically detected,
+#   `configure` will fail unless this variable is set. Since no
+#   default value is used, `configure` will try to figure this out
+#   automatically.
+#erl_xcomp_double_middle_endian
+
+# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes',
+#   the target system must have a working `clock_gettime()' implementation
+#   that can be used for retrieving process CPU time.
+#erl_xcomp_clock_gettime_cpu_time=
+
+# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target
+#   system must have a working `getaddrinfo()' implementation that can
+#   handle both IPv4 and IPv6.
+#erl_xcomp_getaddrinfo=
+
+# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes',
+#   the target system must have a working `gethrvtime()' implementation and
+#   is used with procfs `ioctl()'.
+#erl_xcomp_gethrvtime_procfs_ioctl=
+
+# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the
+#   target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation
+#   that can be used on `brk' and `sbrk' symbols used by the `malloc()'
+#   implementation in use, and by this track the `malloc()' implementations
+#   core memory usage. This is currently only used by unsupported features.
+#erl_xcomp_dlsym_brk_wrappers=
+
+# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target
+#   system must have a working `kqueue()' implementation that returns a file
+#   descriptor which can be used by `poll()' and/or `select()'. If `no' and
+#   the target system has not got `epoll()' or `/dev/poll', the kernel-poll
+#   feature will be disabled.
+#erl_xcomp_kqueue=
+
+# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on
+#   Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on
+#   the target system must work. This variable is recommended to be set to
+#   `no' on Linux systems with kernel versions less than 2.6.
+#erl_xcomp_linux_clock_gettime_correction=
+
+# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise,
+#   `no'. If `yes', the target system must have NPTL (Native POSIX Thread
+#   Library). Older Linux systems have LinuxThreads instead of NPTL (Linux
+#   kernel versions typically less than 2.6).
+#erl_xcomp_linux_nptl=
+
+# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux;
+#   otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target
+#   system. `sigaltstack()' on Linux kernel versions less than 2.4 are
+#   broken.
+#erl_xcomp_linux_usable_sigaltstack=
+
+# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes',
+#   the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old
+#   LinuxThreads thread libraries (Linux kernel versions typically less than
+#   2.2) used these signals and made them unusable by the ERTS.
+#erl_xcomp_linux_usable_sigusrx=
+
+# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise,
+#   `yes'. If `yes', the target system must have a working `poll()'
+#   implementation that also can handle devices. If `no', `select()' will be
+#   used instead of `poll()'.
+erl_xcomp_poll=no
+
+# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target
+#   system must have a `putenv()' implementation that stores a copy of the
+#   key/value pair.
+#erl_xcomp_putenv_copy=
+
+# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target
+#   system must have reliable floating point exceptions.
+#erl_xcomp_reliable_fpe=
+
+# * `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1)
+erl_xcomp_ose_ldflags_pass1="-r --no-omagic"
+
+# * `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2)
+erl_xcomp_ose_ldflags_pass2="-n --emit-relocs -ecrt0_lm --no-omagic"
+
+# * `erl_xcomp_ose_OSEROOT` - OSE installation root directory
+erl_xcomp_ose_OSEROOT="$OSEROOT"
+
+# * `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution
+erl_xcomp_ose_STRIP="$GCCROOT/bin/$GCCTARGET-strip"
+
+# * `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool
+erl_xcomp_ose_LM_POST_LINK="$OSEROOT/bin/$HOST/lm_post_link"
+
+# * `erl_xcomp_ose_LM_SET_CONF` - OSE load module configuration tool
+erl_xcomp_ose_LM_SET_CONF="$OSEROOT/bin/$HOST/lm_set_conf"
+
+# * `erl_xcomp_ose_LM_GET_CONF` - OSE load module elf size tool
+erl_xcomp_ose_LM_ELF_SIZE="$OSEROOT/bin/$HOST/lm_elf_size"
+
+# * `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file
+erl_xcomp_ose_LM_LCF="${ERL_TOP}/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf"
+
+# * `erl_xcomp_ose_LM_CONF` - OSE load module default configuration file
+erl_xcomp_ose_LM_CONF="${ERL_TOP}/erts/emulator/sys/ose/default.lmconf"
+
+## -----------------------------------------------------------------------------
diff --git a/xcomp/erl-xcomp-vars.sh b/xcomp/erl-xcomp-vars.sh
index 337e0fb809..c5e245b4b6 100644
--- a/xcomp/erl-xcomp-vars.sh
+++ b/xcomp/erl-xcomp-vars.sh
@@ -26,4 +26,4 @@
 #    and precious variables in $ERL_TOP/erts/aclocal.m4.
 #
 
-erl_xcomp_vars="erl_xcomp_sysroot erl_xcomp_isysroot erl_xcomp_bigendian erl_xcomp_double_middle_endian erl_xcomp_linux_clock_gettime_correction erl_xcomp_linux_nptl erl_xcomp_linux_usable_sigusrx erl_xcomp_linux_usable_sigaltstack erl_xcomp_poll erl_xcomp_kqueue erl_xcomp_putenv_copy erl_xcomp_reliable_fpe erl_xcomp_getaddrinfo erl_xcomp_gethrvtime_procfs_ioctl erl_xcomp_clock_gettime_cpu_time erl_xcomp_after_morecore_hook erl_xcomp_dlsym_brk_wrappers erl_xcomp_posix_memalign"
+erl_xcomp_vars="erl_xcomp_sysroot erl_xcomp_isysroot erl_xcomp_bigendian erl_xcomp_double_middle_endian erl_xcomp_linux_clock_gettime_correction erl_xcomp_linux_nptl erl_xcomp_linux_usable_sigusrx erl_xcomp_linux_usable_sigaltstack erl_xcomp_poll erl_xcomp_kqueue erl_xcomp_putenv_copy erl_xcomp_reliable_fpe erl_xcomp_getaddrinfo erl_xcomp_gethrvtime_procfs_ioctl erl_xcomp_clock_gettime_cpu_time erl_xcomp_after_morecore_hook erl_xcomp_dlsym_brk_wrappers erl_xcomp_posix_memalign erl_xcomp_ose_ldflags_pass1 erl_xcomp_ose_ldflags_pass2 erl_xcomp_ose_OSEROOT erl_xcomp_ose_STRIP erl_xcomp_ose_LM_POST_LINK erl_xcomp_ose_LM_SET_CONF erl_xcomp_ose_LM_GET_CONF erl_xcomp_ose_LM_ELF_SIZE erl_xcomp_ose_LM_LCF erl_xcomp_ose_LM_CONF erl_xcomp_ose_CONFD erl_xcomp_ose_CRT0_LM"