aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--HOWTO/INSTALL-CROSS.md8
-rw-r--r--HOWTO/INSTALL-WIN32.md10
-rw-r--r--HOWTO/INSTALL.md887
-rw-r--r--README.md11
-rw-r--r--system/doc/design_principles/applications.xml7
-rw-r--r--system/doc/installation_guide/Makefile8
-rw-r--r--system/doc/installation_guide/install-binary.xml127
-rw-r--r--system/doc/installation_guide/part.xml4
-rw-r--r--system/doc/installation_guide/verification.xml102
-rw-r--r--system/doc/installation_guide/xmlfiles.mk6
-rw-r--r--system/doc/system_principles/system_principles.xml9
11 files changed, 517 insertions, 662 deletions
diff --git a/HOWTO/INSTALL-CROSS.md b/HOWTO/INSTALL-CROSS.md
index 10f463c06d..af4b38f292 100644
--- a/HOWTO/INSTALL-CROSS.md
+++ b/HOWTO/INSTALL-CROSS.md
@@ -563,12 +563,6 @@ under the License.
%CopyrightEnd%
-Modifying This Document
------------------------
-
-Before modifying this document you need to have a look at the
-[$ERL_TOP/HOWTO/MARKDOWN.md][] document.
-
[$ERL_TOP/HOWTO/INSTALL.md]: INSTALL.md
@@ -576,6 +570,4 @@ Before modifying this document you need to have a look at the
[How to Build the Documentation]: INSTALL.md#The-ErlangOTP-Documentation_How-to-Build-the-Documentation
[cross configuration variables]: #Currently-Used-Configuration-Variables
[DESTDIR]: http://www.gnu.org/prep/standards/html_node/DESTDIR.html
- [$ERL_TOP/HOWTO/MARKDOWN.md]: MARKDOWN.md
-
[?TOC]: true
diff --git a/HOWTO/INSTALL-WIN32.md b/HOWTO/INSTALL-WIN32.md
index 94d3688f23..0387572dd3 100644
--- a/HOWTO/INSTALL-WIN32.md
+++ b/HOWTO/INSTALL-WIN32.md
@@ -1018,7 +1018,7 @@ Copyright and License
%CopyrightBegin%
-Copyright Ericsson AB 2003-2012. All Rights Reserved.
+Copyright Ericsson AB 2003-2014. All Rights Reserved.
The contents of this file are subject to the Erlang Public License,
Version 1.1, (the "License"); you may not use this file except in
@@ -1033,15 +1033,7 @@ under the License.
%CopyrightEnd%
-Modifying This Document
------------------------
-
-Before modifying this document you need to have a look at the
-[$ERL_TOP/HOWTO/MARKDOWN.md][] document.
-
-
[1]: http://www.erlang.org/faq.html "mailing lists"
- [$ERL_TOP/HOWTO/MARKDOWN.md]: MARKDOWN.md
[?TOC]: true
diff --git a/HOWTO/INSTALL.md b/HOWTO/INSTALL.md
index 368947b36c..f1bb8ec853 100644
--- a/HOWTO/INSTALL.md
+++ b/HOWTO/INSTALL.md
@@ -4,174 +4,109 @@ Building and Installing Erlang/OTP
Introduction
------------
-This document describes how to build and install Erlang/OTP-%OTP-REL%. You
-are advised to read the whole document before attempting to build and install
-Erlang/OTP. You can find more information about Open Source Erlang/OTP at:
+This document describes how to build and install Erlang/OTP-%OTP-REL%.
+Erlang/OTP should be possible to build from source on any Unix/Linux system,
+including OS X. You are advised to read the whole document
+before attempting to build and install Erlang/OTP.
- <http://www.erlang.org/>
+The source code can be downloaded from the official site of Erlang/OTP or GitHub.
+* <http://www.erlang.org>
+* <https://github.com/erlang/otp>
-The source code for Erlang/OTP can also be found in a Git repository:
-
- <http://github.com/erlang/otp>
-
-Erlang/OTP should be possible to build from source on any Unix system,
-including Mac OS X. This document describes how to native compile Erlang/OTP
-on Unix. For detailed instructions on how to
-
-* cross compile Erlang/OTP, see the [$ERL_TOP/HOWTO/INSTALL-CROSS.md][]
- document.
-
-* build Erlang/OTP on Windows, see the [$ERL_TOP/HOWTO/INSTALL-WIN32.md][]
- document.
+Required Utilities
+------------------
- Binary releases for Windows can be found at
- <http://www.erlang.org/download.html>.
+These are the tools you need in order to unpack and build Erlang/OTP.
-Before reading the above mentioned documents you are in any case advised to
-read this document first, since it covers building Erlang/OTP in general as
-well as other important information.
+> *WARNING*: Please have a look at the [Known platform issues][] chapter
+> before you start.
-Daily Build and Test
---------------------
-At Ericsson we have a "Daily Build and Test" that runs on:
-
-* Solaris 8, 9
- * Sparc32
- * Sparc64
-* Solaris 10
- * Sparc32
- * Sparc64
- * x86
-* SuSE Linux/GNU 9.4, 10.1
- * x86
-* SuSE Linux/GNU 10.0, 10.1, 11.0
- * x86
- * x86\_64
-* openSuSE 11.4 (Celadon)
- * x86\_64 (valgrind)
-* Fedora 7
- * PowerPC
-* Fedora 14
- * x86\_64
-* Gentoo Linux/GNU 1.12.11.1
- * x86
-* Ubuntu Linux/GNU 7.04, 10.04, 10.10, 11.0
- * x86\_64
-* MontaVista Linux/GNU 4.0.1
- * PowerPC
-* FreeBSD 8.2
- * x86
-* OpenBSD 5.0
- * x86\_64
-* Mac OS X 10.5.8 (Leopard), 10.7.3 (Lion), 10.9 (Mavericks)
- * x86
-* Windows XP SP3, 2003, Vista, 7
- * x86
-* Windows 7
- * x86\_64
+### Unpacking ###
-We also have the following "Daily Cross Builds":
+* GNU unzip, or a modern uncompress.
+* A TAR program that understands the GNU TAR format for long filenames.
-* SuSE Linux/GNU 10.1 x86 -> SuSE Linux/GNU 10.1 x86\_64
-* SuSE Linux/GNU 10.1 x86\_64 -> Linux/GNU TILEPro64
+### Building ###
-and the following "Daily Cross Build Tests":
+* GNU `make`
+* Compiler -- GNU C Compiler, `gcc` or the C compiler frontend for LLVM, `clang`.
+* Perl 5
+* GNU `m4` -- If HiPE (native code) support is enabled. HiPE can be
+ disabled using `--disable-hipe`
+* `ncurses`, `termcap`, or `termlib` -- The development headers and
+ libraries are needed, often known as `ncurses-devel`. Use
+ `--without-termcap` to build without any of these libraries. Note that
+ in this case only the old shell (without any line editing) can be used.
+* `sed` -- Stream Editor for basic text transformation.
-* SuSE Linux/GNU 10.1 x86\_64
+#### Building in Git ####
-Versions Known NOT to Work
---------------------------
+* GNU `autoconf` of at least version 2.59. Note that `autoconf` is not
+ needed when building an unmodified version of the released source.
-* Suse linux 9.1 is shipped with a patched GCC version 3.3.3, having the
- rpm named `gcc-3.3.3-41`. That version has a serious optimization bug
- that makes it unusable for building the Erlang emulator. Please
- upgrade GCC to a newer version before building on Suse 9.1. Suse Linux
- Enterprise edition 9 (SLES9) has `gcc-3.3.3-43` and is not affected.
+#### Building on OS X ####
-* `gcc-4.3.0` has a serious optimizer bug. It produces an Erlang emulator
- that will crash immediately. The bug is supposed to be fixed in
- `gcc-4.3.1`.
+* Xcode -- Download and install via the Mac App Store.
+ Read about [Building on a Mac][] before proceeding.
-* FreeBSD had a bug which caused `kqueue`/`poll`/`select` to fail to detect
- that a `writev()` on a pipe has been made. This bug should have been fixed
- in FreeBSD 6.3 and FreeBSD 7.0. NetBSD and DragonFlyBSD probably have or
- have had the same bug. More information can be found at:
+### Installing ###
- * <http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/kern/sys_pipe.c>
- * <http://lists.freebsd.org/pipermail/freebsd-arch/2007-September/006790.html>
+* An `install` program that can take multiple file names.
-* `getcwd()` on Solaris 9 can cause an emulator crash. If you have
- async-threads enabled you can increase the stack size of the
- async-threads as a temporary workaround. See the `+a` command-line
- argument in the documentation of `erl(1)`. Without async-threads the
- emulator is not as vulnerable to this bug, but if you hit it without
- async-threads the only workaround available is to enable async-threads
- and increase the stack size of the async-threads. Sun has however
- released patches that fixes the issue:
- > Problem Description: 6448300 large mnttab can cause stack overrun
- > during Solaris 9 getcwd
+Optional Utilities
+------------------
- More information can be found at:
+Some applications are automatically skipped if the dependencies aren't met.
+Here is a list of utilities needed for those applications. You will
+also find the utilities needed for building the documentation.
- * <http://sunsolve.sun.com/search/document.do?assetkey=1-21-112874-40-1&searchclause=6448300>
- * <http://sunsolve.sun.com/search/document.do?assetkey=1-21-114432-29-1&searchclause=6448300>
+### Building ###
-Required Utilities
-------------------
+* OpenSSL -- The opensource toolkit for Secure Socket Layer
+ and Transport Layer Security.
+ Required for building the application `crypto`.
+ Further, `ssl` and `ssh` require a working crypto application and
+ will also be skipped if OpenSSL is missing. The `public_key`
+ application will available without `crypto`, but the functionality
+ will be very limited.
+
+ The development package of OpenSSL including the header files are needed as well
+ as the binary command program `openssl`. At least version 0.9.8 of OpenSSL is required.
+ Read more and download from <http://www.openssl.org>.
+* Oracle Java SE JDK -- The Java Development Kit (Standard Edition).
+ Required for building the application `jinterface` and parts of `ic` and `orber`.
+ At least version 1.5.0 of the JDK is required.
+
+ Download from <http://www.oracle.com/technetwork/java/javase/downloads>.
+ We have also tested with IBM's JDK 1.5.0.
+* X Windows -- Development headers and libraries are needed
+ to build the Erlang/OTP application `gs` on Unix/Linux.
+* `flex` -- Headers and libraries are needed to build the flex
+ scanner for the `megaco` application on Unix/Linux.
+* wxWidgets -- Toolkit for GUI applications.
+ Required for building the `wx` application. At least
+ version 3.0 of wxWidgets is required.
-These are the tools you will need in order to unpack and build Erlang/OTP.
+ Download from <http://sourceforge.net/projects/wxwindows/files/3.0.0/>
+ or get it from GitHub: <https://github.com/wxWidgets/wxWidgets>
-### Unpacking ###
+ Further instructions on wxWidgets, read [Building with wxErlang][].
-* GNU unzip, or a modern uncompress.
-* A TAR program that understands the GNU TAR format for long filenames
- (such as GNU TAR).
-### Building ###
-* GNU `make`
-* `gcc` -- GNU C compiler
-* Perl 5
-* GNU `m4` -- If HiPE (native code) support is enabled. HiPE can be
- disabled using `--disable-hipe`
-* `ncurses`, `termcap`, or `termlib` -- The development headers and
- libraries are needed, often known as `ncurses-devel`. Use
- `--without-termcap` to build without any of these libraries. Note that
- in this case only the old shell (without any line editing) can be used.
-* OpenSSL -- Optional, but needed for building the Erlang/OTP applications
- `ssl` and `crypto`. You need the "development package" of OpenSSL, i.e.
- including the header files. For building the application `ssl` the OpenSSL
- binary command program `openssl` is also needed. At least version 0.9.8
- of OpenSSL is required. Can be downloaded from <http://www.openssl.org>.
-* Sun Java jdk-1.5.0 or higher -- Optional but needed for building the
- Erlang/OTP application `jinterface` and parts of `ic` and `orber`. Can
- be downloaded from <http://java.sun.com>. We have also tested IBM's
- JDK 1.5.0.
-* X Windows -- Optional, but development headers and libraries are needed
- to build the Erlang/OTP application `gs` on Unix/Linux.
-* `sed` -- There seem to be some problems with some of the `sed` version on
- Solaris. Make sure `/bin/sed` or `/usr/bin/sed` is used on the Solaris
- platform.
-* `flex` -- Optional, headers and libraries are needed to build the `flex`
- scanner for the `megaco` application on Unix/Linux.
+### Building Documentation ###
-#### Building Documentation ####
+* `xsltproc` -- A command line XSLT processor.
-* `xsltproc` -- XSLT processor. A tool for applying XSLT stylesheets
- to XML documents. Can be downloaded from
+ A tool for applying XSLT stylesheets
+ to XML documents. Download xsltproc from
<http://xmlsoft.org/XSLT/xsltproc2.html>.
+
* `fop` -- Apache FOP print formatter (requires Java). Can be downloaded
from <http://xmlgraphics.apache.org/fop>.
-#### Building in Git ####
-* GNU `autoconf` of at least version 2.59. Note that `autoconf` is not
- needed when building an unmodified version of the released source.
-
-### Installing ###
-
-* An `install` program that can take multiple file names.
How to Build and Install Erlang/OTP
-----------------------------------
@@ -186,65 +121,205 @@ section below before proceeding.
### Unpacking ###
-Step 1: Start by unpacking the Erlang/OTP distribution file with your GNU
+Start by unpacking the Erlang/OTP distribution file with your GNU
compatible TAR program.
- $ gunzip -c otp_src_%OTP-VSN%.tar.gz | tar xf -
+ $ tar -zxf otp_src_%OTP-VSN%.tar.gz # Assuming bash/sh
-alternatively:
-
- $ zcat otp_src_%OTP-VSN%.tar.gz | tar xf -
-
-
-Step 2: Now cd into the base directory (`$ERL_TOP`).
+Now change directory into the base directory and set the `$ERL_TOP` variable.
$ cd otp_src_%OTP-VSN%
+ $ export ERL_TOP=`pwd` # Assuming bash/sh
### Configuring ###
-Step 3: On some platforms Perl may behave strangely if certain locales are
-set, so optionally you may need to set the LANG variable:
-
- # Bourne shell
- $ LANG=C; export LANG
+Run the following commands to configure the build:
-or
+ $ ./configure [ options ]
- # C-Shell
- $ setenv LANG C
+> *NOTE*: If you are building Erlang/OTP from git you will need to run `./otp_build autoconf` to generate
+> the configure scripts.
-Step 4: Run the following commands to configure the build:
+By default, Erlang/OTP release will be installed in `/usr/local/{bin,lib/erlang}`.
+If you for instance don't have the permission to install in the standard location,
+ you can install Erlang/OTP somewhere else. For example, to install in
+`/opt/erlang/%OTP-VSN%/{bin,lib/erlang}`, use the `--prefix=/opt/erlang/%OTP-VSN%` option.
- $ ./configure [ options ]
+On some platforms Perl may behave strangely if certain locales are
+set. If you get errors when building, try setting the LANG variable:
-If you are building it from git you will need to run `./otp_build autoconf` to generate configure file.
-By default, Erlang/OTP will be installed in `/usr/local/{bin,lib/erlang}`.
-To instead install in `<BaseDir>/{bin,lib/erlang}`, use the
-`--prefix=<BaseDir>` option.
+ $ export LANG=C # Assuming bash/sh
-If you upgraded the source with some patch you may need to clean up
-from previous builds before the new build. Before doing a `make clean`,
-be sure to read the [Pre-built Source Release][] section below.
### Building ###
-Step 5: Build the Erlang/OTP package.
+Build the Erlang/OTP release.
$ make
+
+### Testing ###
+
+Before installation you should test whether your build is working properly
+by running our smoke test. The smoke test is a subset of the complete Erlang/OTP test suites.
+First you will need to build and release the test suites.
+
+ $ make release_tests
+
+This creates an additional folder in `$ERL_TOP/release` called `tests`.
+Now, it's time to start the smoke test.
+
+ $ cd release/tests/test_server
+ $ $ERL_TOP/bin/erl -s ts install -s ts smoke_test batch -s init stop
+
+To verify that everything is ok you should open `$ERL_TOP/release/tests/test_server/index.html`
+in your web browser and make sure that there are zero failed test cases.
+
+> *NOTE*: On builds without `crypto`, `ssl` and `ssh` there is a failed test case
+> for undefined functions. Verify that the failed test case log only shows calls
+> to skipped applications.
+
### Installing ###
-Step 6: Install then Erlang/OTP package
+You are now ready to install the Erlang/OTP release!
+The following command will install the release on your system.
$ make install
-### A Closer Look at the individual Steps ###
-Let us go through them in some detail.
+### Running ###
+
+You should now have a working release of Erlang/OTP!
+Jump to [System Principles][] for instructions on running Erlang/OTP.
+
+
+### How to Build the Documentation ###
+
+Make sure you're in the top directory in the source tree.
+
+ $ cd $ERL_TOP
+
+If you have just built Erlang/OTP in the current source tree, you have
+already ran `configure` and do not need to do this again; otherwise, run
+`configure`.
+
+ $ ./configure [Configure Args]
+
+When building the documentation you need a full Erlang/OTP-%OTP-VSN% system in
+the `$PATH`.
+
+ $ export PATH=$ERL_TOP/bin:$PATH # Assuming bash/sh
+
+Build the documentation.
-#### Configuring ####
+ $ make docs
+
+#### Build Issues ####
+
+We have sometimes experienced problems with Oracle's `java` running out of
+memory when running `fop`. Increasing the amount of memory available
+as follows has in our case solved the problem.
+
+ $ export FOP_OPTS="-Xmx<Installed amount of RAM in MB>m"
+
+More information can be found at
+* <http://xmlgraphics.apache.org/fop/0.95/running.html#memory>.
+
+
+### How to Install the Documentation ###
+
+The documentation can be installed either using the `install-docs` target,
+or using the `release_docs` target.
+
+* If you have installed Erlang/OTP using the `install` target, install
+ the documentation using the `install-docs` target. Install locations
+ determined by `configure` will be used. `$DESTDIR` can be used the
+ same way as when doing `make install`.
+
+ $ make install-docs
+
+* If you have installed Erlang/OTP using the `release` target, install
+ the documentation using the `release_docs` target. You typically want
+ to use the same `RELEASE_ROOT` as when invoking `make release`.
+
+ $ make release_docs RELEASE_ROOT=<release dir>
+
+
+### Accessing the Documentation ###
+
+After installation you can access the documentation by
+
+* Reading man pages. Make sure that `erl` is referring to the
+ installed version. For example `/usr/local/bin/erl`.
+ Try viewing at the man page for Mnesia
+
+ $ erl -man mnesia
+
+* Browsing the html pages by loading the page `/usr/local/lib/erlang/doc/erlang/index.html`
+ or `<BaseDir>/lib/erlang/doc/erlang/index.html` if the prefix option has been used.
+
+
+### How to Install the Pre-formatted Documentation ###
+
+Pre-formatted [html documentation][] and [man pages][] can be downloaded from
+* <http://www.erlang.org/download.html>.
+
+Extract the html archive in the installation directory.
+
+ $ cd <ReleaseDir>
+ $ tar -zxf otp_html_%OTP-VSN%.tar.gz
+
+For `erl -man <page>` to work the Unix manual pages have to be
+installed in the same way, i.e.
+
+ $ cd <ReleaseDir>
+ $ tar -zxf otp_man_%OTP-VSN%.tar.gz
+
+Where `<ReleaseDir>` is
+
+* `<PrefixDir>/lib/erlang` if you have installed Erlang/OTP using
+ `make install`.
+* `$DESTDIR<PrefixDir>/lib/erlang` if you have installed Erlang/OTP
+ using `make install DESTDIR=<TmpInstallDir>`.
+* `RELEASE_ROOT` if you have installed using
+ `make release RELEASE_ROOT=<ReleaseDir>`.
+
+
+Advanced configuration and build of Erlang/OTP
+----------------------------------------------
+
+If you want to tailor your Erlang/OTP build and installation, please read
+on for detailed information about the individual steps.
+
+### make and $ERL\_TOP ###
+
+All the makefiles in the entire directory tree use the environment
+variable `ERL_TOP` to find the absolute path of the installation. The
+`configure` script will figure this out and set it in the top level
+Makefile (which, when building, it will pass on). However, when
+developing it is sometimes convenient to be able to run make in a
+subdirectory. To do this you must set the `ERL_TOP` variable
+before you run make.
-Step 4 runs a configuration script created by the GNU autoconf utility, which
+For example, assume your GNU make program is called `make` and you
+want to rebuild the application `STDLIB`, then you could do:
+
+ $ cd lib/stdlib; env ERL_TOP=<Dir> make
+
+where `<Dir>` would be what you find `ERL_TOP` is set to in the top level
+Makefile.
+
+### otp\_build vs configure/make ###
+
+Building Erlang/OTP can be done either by using the `$ERL_TOP/otp_build`
+script, or by invoking `$ERL_TOP/configure` and `make` directly. Building using
+`otp_build` is easier since it involves fewer steps, but the `otp_build` build
+procedure is not as flexible as the `configure`/`make` build procedure. The binary
+releases for Windows that we deliver are built using `otp_build`.
+
+### Configuring ###
+
+The configure script is created by the GNU autoconf utility, which
checks for system specific features and then creates a number of makefiles.
The configure script allows you to customize a number of parameters;
@@ -260,10 +335,10 @@ use the `--prefix` argument like this: `./configure --prefix=<Dir>`.
Some of the available `configure` options are:
* `--prefix=PATH` - Specify installation prefix.
-* `--{enable,disable}-threads` - Thread support (enabled by default if
- possible)
+
+* `--{enable,disable}-threads` - Thread support. This is enabled by default if possible.
* `--{enable,disable}-smp-support` - SMP support (enabled by default if
- possible)
+ a usable POSIX thread library or native Windows threads is found)
* `--{enable,disable}-kernel-poll` - Kernel poll support (enabled by
default if possible)
* `--{enable,disable}-hipe` - HiPE support (enabled by default on supported
@@ -321,9 +396,9 @@ Some of the available `configure` options are:
to configure.
* `--without-$app` - By default all applications in Erlang/OTP will be included
in a release. If this is not wanted it is possible to specify that Erlang/OTP
- should be compiled without that applications, i.e. `--without-wx`. There is
- no automatic dependency handling inbetween applications. So if you disable
- an application that another depends on, you also have to disable the
+ should be compiled without one or more applications, i.e. `--without-wx`. There is
+ no automatic dependency handling between applications. If you disable
+ an application that another application depends on, you also have to disable the
dependant application.
* `--enable-dirty-schedulers` - Enable the **experimental** dirty schedulers
functionality. Note that the dirty schedulers functionality is experimental,
@@ -334,26 +409,133 @@ Some of the available `configure` options are:
If you or your system has special requirements please read the `Makefile` for
additional configuration information.
-#### Building ####
-Step 5 builds the Erlang/OTP system. On a fast computer, this will take about
-5 minutes. After completion of this step, you should have a working
-Erlang/OTP system which you can try by typing `bin/erl`. This should start
-up Erlang/OTP and give you a prompt:
+### Building ###
+
+Building Erlang/OTP on a relatively fast computer takes approximately
+5 minutes. To speed it up, you can utilize parallel make with the `-j<num_jobs>` option.
+
+ $ export MAKEFLAGS=-j8 # Assuming bash/sh
+ $ make
+
+If you've upgraded the source with a patch you may need to clean up from previous
+builds before the new build.
+Make sure to read the [Pre-built Source Release][] section below before doing a `make clean`.
+
+#### Within Git ####
+
+When building in a Git working directory you also have to have a GNU `autoconf`
+of at least version 2.59 on your system, because you need to generate the
+`configure` scripts before you can start building.
+
+The `configure` scripts are generated by invoking `./otp_build autoconf` in
+the `$ERL_TOP` directory. The `configure` scripts also have to be regenerated
+when a `configure.in` or `aclocal.m4` file has been modified. Note that when
+checking out a branch a `configure.in` or `aclocal.m4` file may change
+content, and you may therefore have to regenerate the `configure` scripts
+when checking out a branch. Regenerated `configure` scripts imply that you
+have to run `configure` and build again.
+
+> *NOTE*: Running `./otp_build autoconf` is **not** needed when building
+> an unmodified version of the released source.
+
+Other useful information can be found at our GitHub wiki:
+* <http://wiki.github.com/erlang/otp>
+
+#### OS X (Darwin) ####
+
+Make sure that the command `hostname` returns a valid fully qualified host
+name (this is configured in `/etc/hostconfig`). Otherwise you might experience
+problems when running distributed systems.
+
+If you develop linked-in drivers (shared library) you need to link using
+`gcc` and the flags `-bundle -flat_namespace -undefined suppress`. You also
+include `-fno-common` in `CFLAGS` when compiling. Use `.so` as the library
+suffix.
+
+If you have Xcode 4.3, or later, you will also need to download
+"Command Line Tools" via the Downloads preference pane in Xcode.
+
+#### Building with wxErlang ####
+
+Be aware that the wxWidgets-3.0 is a new release of wxWidgets, it is not as matured
+as the old releases and the OS X port still lags behind the other ports.
+
+Configure and build wxWidgets (on Mavericks - 10.9):
+
+ $ ./configure --with-cocoa --prefix=/usr/local
+ or without support for old versions and with static libs
+ $ ./configure --with-cocoa --prefix=/usr/local --with-macosx-version-min=10.9 --disable-shared
+ $ make
+ $ sudo make install
+ $ export PATH=/usr/local/bin:$PATH
+
+Check that you got the correct wx-config
+
+ $ which wx-config && wx-config --version-full
+
+Build Erlang/OTP
+
+ $ export PATH=/usr/local/bin:$PATH
+ $ cd $ERL_TOP
+ $ ./configure --enable-shared-zlib
+ $ make
+ $ sudo make install
+
+
+#### Pre-built Source Release ####
+
+The source release is delivered with a lot of platform independent
+build results already pre-built. If you want to remove these pre-built
+files, invoke `./otp_build remove_prebuilt_files` from the `$ERL_TOP`
+directory. After you have done this, you can build exactly the same way
+as before, but the build process will take a much longer time.
+
+> *WARNING*: Doing `make clean` in an arbitrary directory of the source
+> tree, may remove files needed for bootstrapping the build.
+>
+> Doing `./otp_build save_bootstrap` from the `$ERL_TOP` directory before
+> doing `make clean` will ensure that it will be possible to build after
+> doing `make clean`. `./otp_build save_bootstrap` will be invoked
+> automatically when `make` is invoked from `$ERL_TOP` with either the
+> `clean` target, or the default target. It is also automatically invoked
+> if `./otp_build remove_prebuilt_files` is invoked.
+
+#### How to Build a Debug Enabled Erlang RunTime System ####
+
+After completing all the normal building steps described above a debug
+enabled runtime system can be built. To do this you have to change
+directory to `$ERL_TOP/erts/emulator`.
+
+In this directory execute:
+
+ $ make debug FLAVOR=$FLAVOR
+
+where `$FLAVOR` is either `plain` or `smp`. The flavor options will
+produce a beam.debug and beam.smp.debug executable respectively. The
+files are installed along side with the normal (opt) versions `beam.smp`
+and `beam`.
+
+To start the debug enabled runtime system execute:
+
+ $ $ERL_TOP/bin/cerl -debug
- $ bin/erl
- Erlang/OTP %OTP-REL% [erts-%ERTS-VSN%] [source] [smp:4:4] [async-threads:0] [kernel-poll:false]
+The debug enabled runtime system features lock violation checking,
+assert checking and various sanity checks to help a developer ensure
+correctness. Some of these features can be enabled on a normal beam
+using appropriate configure options.
- Eshell V%ERTS-VSN% (abort with ^G)
- 1> _
+There are other types of runtime systems that can be built as well
+using the similar steps just described.
-#### Installing ####
+ $ make $TYPE FLAVOR=$FLAVOR
+
+where `$TYPE` is `opt`, `gcov`, `gprof`, `debug`, `valgrind`, or `lcnt`.
+These different beam types are useful for debugging and profiling
+purposes.
-Step 6 is optional. It installs Erlang/OTP at a standardized location (if you
-change your mind about where you wish to install you can rerun step 4,
-without having to do step 5 again).
-##### Alternative Installation Procedures #####
+### Installing ###
* Staged install using [DESTDIR][]. You can perform the install
phase in a temporary directory and later move the installation into
@@ -435,7 +617,7 @@ without having to do step 5 again).
if you want to try the system out, running test suites, etc, before doing
the real install without `EXTRA_PREFIX`.
-### Symbolic Links in --bindir ###
+#### Symbolic Links in --bindir ####
When doing `make install` and the default installation prefix is used,
relative symbolic links will be created from `/usr/local/bin` to all public
@@ -449,156 +631,10 @@ passed to `configure`. One can force relative, or absolute links by passing
phase. Note that such a request might cause a failure if the request cannot
be satisfied.
-### Pre-built Source Release ###
-
-The source release is delivered with a lot of platform independent
-build results already pre-built. If you want to remove these pre-built
-files, invoke `./otp_build remove_prebuilt_files` from the `$ERL_TOP`
-directory. After you have done this, you can build exactly the same way
-as before, but the build process will take a much longer time.
-
-> *WARNING*: Doing `make clean` in an arbitrary directory of the source
-> tree, may remove files needed for bootstrapping the build.
->
-> Doing `./otp_build save_bootstrap` from the `$ERL_TOP` directory before
-> doing `make clean` will ensure that it will be possible to build after
-> doing `make clean`. `./otp_build save_bootstrap` will be invoked
-> automatically when `make` is invoked from `$ERL_TOP` with either the
-> `clean` target, or the default target. It is also automatically invoked
-> if `./otp_build remove_prebuilt_files` is invoked.
-
-### Building in Git ###
-
-When building in a Git working directory you also have to have a GNU `autoconf`
-of at least version 2.59 on your system, because you need to generate the
-`configure` scripts before you can start building.
-
-The `configure` scripts are generated by invoking `./otp_build autoconf` in
-the `$ERL_TOP` directory. The `configure` scripts also have to be regenerated
-when a `configure.in` or `aclocal.m4` file has been modified. Note that when
-checking out a branch a `configure.in` or `aclocal.m4` file may change
-content, and you may therefore have to regenerate the `configure` scripts
-when checking out a branch. Regenerated `configure` scripts imply that you
-have to run `configure` and build again.
-
-> *NOTE*: Running `./otp_build autoconf` is **not** needed when building
-> an unmodified version of the released source.
-
-Other useful information can be found at our github wiki:
-<http://wiki.github.com/erlang/otp>
-
-### make and $ERL\_TOP ###
-
-All the makefiles in the entire directory tree use the environment
-variable `ERL_TOP` to find the absolute path of the installation. The
-`configure` script will figure this out and set it in the top level
-Makefile (which, when building, it will pass on). However, when
-developing it is sometimes convenient to be able to run make in a
-subdirectory. To do this you must set the `ERL_TOP` variable
-before you run make.
-
-For example, assume your GNU make program is called `make` and you
-want to rebuild the application `STDLIB`, then you could do:
-
- $ cd lib/stdlib; env ERL_TOP=<Dir> make
-
-where `<Dir>` would be what you find `ERL_TOP` is set to in the top level
-Makefile.
-
-The Erlang/OTP Documentation
-----------------------------
-
-### How to Build the Documentation ###
-
-Before you can build the documentation you need to either [native build][]
-or [cross build][] the Erlang/OTP system. After this you can build the
-documentation as follows.
-
- $ cd $ERL_TOP
- $ make docs
-
-The documentation can be installed either using the `install-docs` target,
-or using the `release_docs` target.
-
-* If you have installed Erlang/OTP using the `install` target, install
- the documentation using the `install-docs` target. Install locations
- determined by `configure` will be used. `$DESTDIR` can be used the
- same way as when doing `make install`.
-
- $ make install-docs
-
-* If you have installed Erlang/OTP using the `release` target, install
- the documentation using the `release_docs` target. You typically want
- to use the same `RELEASE_ROOT` as when invoking `make release`.
-
- $ make release_docs RELEASE_ROOT=<release dir>
-
-#### Build Issues ####
-
-We have sometimes experienced problems with Sun's `java` running out of
-memory when running `fop`. Increasing the amount of memory available
-as follows has in our case solved the problem.
-
- $ export FOP_OPTS="-Xmx<Installed amount of RAM in MB>m"
-
-More information can be found at
-<http://xmlgraphics.apache.org/fop/0.95/running.html#memory>.
-
-### How to Install the Pre-formatted Documentation ###
-
-Pre-formatted [html documentation][] and [man pages][] can be downloaded at
-<http://www.erlang.org/download.html>.
-
-For some graphical tools to find the on-line help you have to install
-the HTML documentation on top of the installed OTP applications, i.e.
-
- $ cd <ReleaseDir>
- $ gunzip -c otp_html_%OTP-VSN%.tar.gz | tar xf -
-
-For `erl -man <page>` to work the Unix manual pages have to be
-installed in the same way, i.e.
-
- $ cd <ReleaseDir>
- $ gunzip -c otp_man_%OTP-VSN%.tar.gz | tar xf -
-
-Where `<ReleaseDir>` is
-
-* `<PrefixDir>/lib/erlang` if you have installed Erlang/OTP using
- `make install`.
-* `$DESTDIR<PrefixDir>/lib/erlang` if you have installed Erlang/OTP
- using `make install DESTDIR=<TmpInstallDir>`.
-* `RELEASE_ROOT` if you have installed using
- `make release RELEASE_ROOT=<ReleaseDir>`.
-
-Support for SMP (Symmetric Multi Processing)
---------------------------------------------
-
-An emulator with SMP support will be built by default on most platforms
-if a usable POSIX thread library or native Windows threads is found.
-You can force building of an SMP emulator, by using
-`./configure --enable-smp-support`. However, if configure does not
-automatically enable SMP support, the build is very likely to fail.
+### Running ###
-Use `./configure --disable-smp-support` if you for some reason do not
-want to have the emulator with SMP support built.
-
-If SMP support is enabled, support for threaded I/O will also be turned on
-(also in the emulator without SMP support).
-
-The `erl` command will automatically start the SMP emulator if the
-computer has more than one logical processor. You can force a start
-of the emulator with SMP support by passing `-smp enable` as
-command line arguments to erl, and you can force a start of the
-emulator without SMP support by passing `-smp disable`.
-
-GS (Graphic System)
--------------------
-
-GS now Tcl/Tk 8.4. It will be searched for when starting GS.
-
-Using HiPE
-----------
+#### Using HiPE ####
HiPE supports the following system configurations:
@@ -619,12 +655,12 @@ HiPE supports the following system configurations:
* FreeBSD: FreeBSD 6.1 and 6.2 in 32-bit and 64-bit modes should work.
- * MacOSX/Darwin: Darwin 9.8.0 in 32-bit mode should work.
+ * OS X/Darwin: Darwin 9.8.0 in 32-bit mode should work.
* PowerPC: All 32-bit 6xx/7xx(G3)/74xx(G4) processors should work. 32-bit
mode on 970 (G5) and POWER5 processors should work.
- * Linux (Yellow Dog) and Mac OSX 10.4 are supported.
+ * Linux (Yellow Dog) and OS X 10.4 are supported.
* SPARC: All UltraSPARC processors running 32-bit user code should work.
@@ -643,11 +679,11 @@ HiPE is automatically enabled on the following systems:
* x86 in 32-bit mode: Linux, Solaris, FreeBSD
* x86 in 64-bit mode: Linux, Solaris, FreeBSD
-* PowerPC: Linux, MacOSX
+* PowerPC: Linux, Mac OSX
* SPARC: Linux
* ARM: Linux
-On other supported systems you need to `./configure --enable-hipe`.
+On other supported systems, see [Advanced Configure][] on how to enable HiPE.
If you are running on a platform supporting HiPE and if you have not disabled
HiPE, you can compile a module into native code like this from the Erlang
@@ -659,7 +695,7 @@ or
1> c(Module, [native|OtherOptions]).
-Using the erlc program, write like this:
+Using the erlc program, write like this
$ erlc +native Module.erl
@@ -674,88 +710,103 @@ Use `hipe:help_options/0` to print out the available options.
1> hipe:help_options().
-Mac OS X (Darwin)
------------------
-
-Make sure that the command `hostname` returns a valid fully qualified host
-name (this is configured in `/etc/hostconfig`).
-
-If you develop linked-in drivers (shared library) you need to link using
-`gcc` and the flags `-bundle -flat_namespace -undefined suppress`. You also
-include `-fno-common` in `CFLAGS` when compiling. Use `.so` as the library
-suffix.
-
-Install `Xcode` from the `AppStore` if it is not already installed.
-
-If you have Xcode 4.3, or later, you will also need to download
-"Command Line Tools" via the Downloads preference pane in Xcode.
-
-### Building with wxErlang ###
+#### Running with GS ####
-If you want to build the `wx` application, you will need to get wxWidgets-3.0 (or later)
-(`wxWidgets-3.0.0.tar.bz2` from <http://sourceforge.net/projects/wxwindows/files/3.0.0/>)
-or get it from github:
- $ git clone [email protected]:wxWidgets/wxWidgets.git
+The `gs` application requires the GUI toolkit Tcl/Tk to run. At least
+version 8.4 is required.
-Be aware that the wxWidgets-3.0 is a new release of wxWidgets, it is not as matured
-as the old releases and the MacOsX port still lags behind the other ports.
-
-Configure and build wxWidgets (on Mavericks - 10.9):
- $ ./configure --with-cocoa --prefix=/usr/local
- or without support for old versions and with static libs
- $ ./configure --with-cocoa --prefix=/usr/local --with-macosx-version-min=10.9 --disable-shared
- $ make
- $ sudo make install
- $ export PATH=/usr/local/bin:$PATH
+Known platform issues
+---------------------
-Check that you got the correct wx-config
+* Suse linux 9.1 is shipped with a patched GCC version 3.3.3, having the
+ rpm named `gcc-3.3.3-41`. That version has a serious optimization bug
+ that makes it unusable for building the Erlang emulator. Please
+ upgrade GCC to a newer version before building on Suse 9.1. Suse Linux
+ Enterprise edition 9 (SLES9) has `gcc-3.3.3-43` and is not affected.
- $ which wx-config
+* `gcc-4.3.0` has a serious optimizer bug. It produces an Erlang emulator
+ that will crash immediately. The bug is supposed to be fixed in
+ `gcc-4.3.1`.
-### Finish up ###
+* FreeBSD had a bug which caused `kqueue`/`poll`/`select` to fail to detect
+ that a `writev()` on a pipe has been made. This bug should have been fixed
+ in FreeBSD 6.3 and FreeBSD 7.0. NetBSD and DragonFlyBSD probably have or
+ have had the same bug. More information can be found at:
-Build Erlang
+ * <http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/kern/sys_pipe.c>
+ * <http://lists.freebsd.org/pipermail/freebsd-arch/2007-September/006790.html>
- $ export PATH=/usr/local/bin:$PATH
- $ cd $ERL_TOP
- $ ./configure --enable-shared-zlib
- $ make
- $ sudo make install
+* `getcwd()` on Solaris 9 can cause an emulator crash. If you have
+ async-threads enabled you can increase the stack size of the
+ async-threads as a temporary workaround. See the `+a` command-line
+ argument in the documentation of `erl(1)`. Without async-threads the
+ emulator is not as vulnerable to this bug, but if you hit it without
+ async-threads the only workaround available is to enable async-threads
+ and increase the stack size of the async-threads. Oracle has however
+ released patches that fixes the issue:
-How to Build a Debug Enabled Erlang RunTime System
---------------------------------------------------
+ > Problem Description: 6448300 large mnttab can cause stack overrun
+ > during Solaris 9 getcwd
-After completing all the normal building steps described above a debug
-enabled runtime system can be built. To do this you have to change
-directory to `$ERL_TOP/erts/emulator`.
+ More information can be found at:
+ * <https://getupdates.oracle.com/readme/112874-40>
+ * <https://getupdates.oracle.com/readme/114432-29>
-In this directory execute:
+* `sed` on Solaris seem to have some problems. For example on
+ Solaris 8, the BSD `sed` and XPG4 `sed` should be avoided.
+ Make sure `/bin/sed` or `/usr/bin/sed` is used on the Solaris
+ platform.
- $ make debug FLAVOR=$FLAVOR
-where `$FLAVOR` is either `plain` or `smp`. The flavor options will
-produce a beam.debug and beam.smp.debug executable respectively. The
-files are installed along side with the normal (opt) versions `beam.smp`
-and `beam`.
+Daily Build and Test
+--------------------
+At Ericsson we have a "Daily Build and Test" that runs on:
-To start the debug enabled runtime system execute:
+* Solaris 8, 9
+ * Sparc32
+ * Sparc64
+* Solaris 10
+ * Sparc32
+ * Sparc64
+ * x86
+* SuSE Linux/GNU 9.4, 10.1
+ * x86
+* SuSE Linux/GNU 10.0, 10.1, 11.0
+ * x86
+ * x86\_64
+* openSuSE 11.4 (Celadon)
+ * x86\_64 (valgrind)
+* Fedora 7
+ * PowerPC
+* Fedora 16
+ * x86\_64
+* Gentoo Linux/GNU 1.12.11.1
+ * x86
+* Ubuntu Linux/GNU 7.04, 10.04, 10.10, 11.04, 12.04
+ * x86\_64
+* MontaVista Linux/GNU 4.0.1
+ * PowerPC
+* FreeBSD 10.0
+ * x86
+* OpenBSD 5.4
+ * x86\_64
+* OS X 10.5.8 (Leopard), 10.7.5 (Lion), 10.9.1 (Mavericks)
+ * x86
+* Windows XP SP3, 2003, Vista, 7
+ * x86
+* Windows 7
+ * x86\_64
- $ $ERL_TOP/bin/cerl -debug
+We also have the following "Daily Cross Builds":
-The debug enabled runtime system features lock violation checking,
-assert checking and various sanity checks to help a developer ensure
-correctness. Some of these features can be enabled on a normal beam
-using appropriate configure options.
+* SuSE Linux/GNU 10.1 x86 -> SuSE Linux/GNU 10.1 x86\_64
+* SuSE Linux/GNU 10.1 x86\_64 -> Linux/GNU TILEPro64
-There are other types of runtime systems that can be built as well
-using the similar steps just described.
+and the following "Daily Cross Build Tests":
- $ make $TYPE FLAVOR=$FLAVOR
+* SuSE Linux/GNU 10.1 x86\_64
-where `$TYPE` is `opt`, `gcov`, `gprof`, `debug`, `valgrind`, or `lcnt`.
-These different beam types are useful for debugging and profiling
-purposes.
Authors
-------
@@ -764,6 +815,7 @@ Authors are mostly listed in the application's `AUTHORS` files,
that is `$ERL_TOP/lib/*/AUTHORS` and `$ERL_TOP/erts/AUTHORS`,
not in the individual source files.
+
Copyright and License
---------------------
@@ -784,30 +836,25 @@ under the License.
%CopyrightEnd%
-More Information
-----------------
-
-More information can be found at <http://www.erlang.org>.
-Modifying This Document
------------------------
-
-Before modifying this document you need to have a look at the
-[$ERL_TOP/HOWTO/MARKDOWN.md][] document.
[$ERL_TOP/HOWTO/INSTALL-CROSS.md]: INSTALL-CROSS.md
[$ERL_TOP/HOWTO/INSTALL-WIN32.md]: INSTALL-WIN32.md
[DESTDIR]: http://www.gnu.org/prep/standards/html_node/DESTDIR.html
- [Building in Git]: #How-to-Build-and-Install-ErlangOTP_Building-in-Git
- [Pre-built Source Release]: #How-to-Build-and-Install-ErlangOTP_Prebuilt-Source-Release
- [make and $ERL_TOP]: #How-to-Build-and-Install-ErlangOTP_make-and-ERLTOP
+ [Building in Git]: #Advanced-configuration-and-build-of-ErlangOTP_Building_Within-Git
+ [Advanced Configure]: #Advanced-configuration-and-build-of-ErlangOTP_Configuring
+ [Pre-built Source Release]: #Advanced-configuration-and-build-of-ErlangOTP_Building_Prebuilt-Source-Release
+ [make and $ERL_TOP]: #Advanced-configuration-and-build-of-ErlangOTP_make-and-ERLTOP
[html documentation]: http://www.erlang.org/download/otp_doc_html_%OTP-VSN%.tar.gz
[man pages]: http://www.erlang.org/download/otp_doc_man_%OTP-VSN%.tar.gz
[the released source tar ball]: http://www.erlang.org/download/otp_src_%OTP-VSN%.tar.gz
+ [System Principles]: ../system_principles/system_principles
+ [Known platform issues]: #Known-platform-issues
[native build]: #How-to-Build-and-Install-ErlangOTP
[cross build]: INSTALL-CROSS.md
- [$ERL_TOP/HOWTO/MARKDOWN.md]: MARKDOWN.md
-
- [?TOC]: true
+ [Required Utilities]: #Required-Utilities
+ [Optional Utilities]: #Optional-Utilities
+ [Building on a Mac]: #Advanced-configuration-and-build-of-ErlangOTP_Building_OS-X-Darwin
+ [Building with wxErlang]: #Advanced-configuration-and-build-of-ErlangOTP_Building_Building-with-wxErlang
diff --git a/README.md b/README.md
index a6a4f11be8..bf80b6391b 100644
--- a/README.md
+++ b/README.md
@@ -12,6 +12,15 @@ middle-ware to develop these systems. It includes its own distributed
database, applications to interface towards other languages, debugging
and release handling tools.
+ERTS and BEAM
+-------------
+**BEAM** is the name of the virtual machine where all Erlang code is executed.
+Every compiled Erlang file has the suffix .beam. The virtual machine
+is sometimes referred to as the emulator.
+
+**ERTS** is the Erlang Runtime System where the BEAM, kernel and
+standard libraries amongst others are included.
+
More information can be found at [erlang.org] [1].
Building and Installing
@@ -57,7 +66,7 @@ Copyright and License
> %CopyrightBegin%
>
-> Copyright Ericsson AB 2010-2012. All Rights Reserved.
+> Copyright Ericsson AB 2010-2014. All Rights Reserved.
>
> The contents of this file are subject to the Erlang Public License,
> Version 1.1, (the "License"); you may not use this file except in
diff --git a/system/doc/design_principles/applications.xml b/system/doc/design_principles/applications.xml
index 228ca1f2bf..7b030115df 100644
--- a/system/doc/design_principles/applications.xml
+++ b/system/doc/design_principles/applications.xml
@@ -4,7 +4,7 @@
<chapter>
<header>
<copyright>
- <year>1997</year><year>2013</year>
+ <year>1997</year><year>2014</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -157,8 +157,9 @@ ch_app:stop([])</code>
all applications have dependencies to at least <c>kernel</c>
and <c>stdlib</c>.</item>
</taglist>
- <p>The syntax and contents of of the application resource file
- are described in detail in <c>app(4)</c>.</p>
+ <note><p>The syntax and contents of of the application resource file
+ are described in detail in the<seealso marker="kernel:app">
+ Application resource file reference</seealso>.</p></note>
</section>
<section>
diff --git a/system/doc/installation_guide/Makefile b/system/doc/installation_guide/Makefile
index 6923f52d8a..83210bd21f 100644
--- a/system/doc/installation_guide/Makefile
+++ b/system/doc/installation_guide/Makefile
@@ -1,7 +1,7 @@
#
# %CopyrightBegin%
#
-# Copyright Ericsson AB 1996-2012. All Rights Reserved.
+# Copyright Ericsson AB 1996-2014. All Rights Reserved.
#
# The contents of this file are subject to the Erlang Public License,
# Version 1.1, (the "License"); you may not use this file except in
@@ -58,8 +58,7 @@ XML_FILES = \
GENERATED_XML_FILES = \
INSTALL.xml \
INSTALL-CROSS.xml \
- INSTALL-WIN32.xml \
- MARKDOWN.xml
+ INSTALL-WIN32.xml
# ----------------------------------------------------
@@ -74,8 +73,7 @@ REDIRECT_HTML_DIR = $(HTMLDIR)/source
REDIRECT_HTML_FILES = \
$(REDIRECT_HTML_DIR)/INSTALL.html \
$(REDIRECT_HTML_DIR)/INSTALL-CROSS.html \
- $(REDIRECT_HTML_DIR)/INSTALL-WIN32.html \
- $(REDIRECT_HTML_DIR)/MARKDOWN.html
+ $(REDIRECT_HTML_DIR)/INSTALL-WIN32.html
# ----------------------------------------------------
# FLAGS
diff --git a/system/doc/installation_guide/install-binary.xml b/system/doc/installation_guide/install-binary.xml
index 07027a39f6..af7dab6e44 100644
--- a/system/doc/installation_guide/install-binary.xml
+++ b/system/doc/installation_guide/install-binary.xml
@@ -4,7 +4,7 @@
<chapter>
<header>
<copyright>
- <year>2000</year><year>2013</year>
+ <year>2000</year><year>2014</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -31,117 +31,40 @@
<rev>C</rev>
<file>install-binary.xml</file>
</header>
-
- <section>
- <title>UNIX</title>
-
- <section>
- <title>Introduction</title>
- <p>The system is delivered as a single compressed tar file.</p>
- <p>To browse the on-line HTML documentation, Netscape or an equivalent
- browser supporting frames is needed.</p>
- </section>
-
- <section>
- <title>Installation Procedure</title>
- <p>When installed, the entire system, except for a small start-up
- script, resides in a single directory tree. The location of this
- directory tree can be chosen arbitrarily by the installer, and it
- does not need to be in the user's <c>$PATH</c>. The only requirements
- are that the file system where it is placed has enough free space,
- and that the users who run Erlang/OTP have read access to it. In the
- example below, the directory tree is assumed to be located at
- <c>/usr/local/erlang</c>, which is here called the <em>top-level directory</em>.</p>
- <p>It is assumed that you have the compressed tar file, the name of
- which is <c><![CDATA[<PREFIX>.tar.gz]]></c>, where <c><![CDATA[<PREFIX>]]></c> is a string
- denoting the particular Erlang/OTP release, e.g.
- <c>otp_LXA_11930_sunos5_R9B</c>.</p>
- <p>Wherever the string <c><![CDATA[<PREFIX>]]></c> is used below, it should
- be replaced by the actual name prefix of the compressed tar file.</p>
- <p>The tape archive file does not have one single directory in which
- all other files are rooted. Therefore the tape archive file must be
- extracted into an empty (newly created) directory.</p>
- <list type="ordered">
- <item>
- <p>If the <em>top-level directory</em> does not already exist,
- create it:</p>
- <pre>
-mkdir /usr/local/erlang</pre>
- </item>
- <item>
- <p>Change the current directory to the <em>top level directory</em>:</p>
- <pre>
-cd /usr/local/erlang</pre>
- </item>
- <item>
- <p>Create the <em>installation directory</em> with an appropriate
- name. For example:</p>
- <pre>
-mkdir otp_r7b</pre>
- </item>
- <item>
- <p>Change to the <em>installation directory</em>, e.g.</p>
- <pre>
-cd otp_r7b</pre>
- </item>
- <item>
- <p>Assuming the compressed tar file resides in the directory
- <c><![CDATA[<SOME-DIR>]]></c>,. extract the compressed tar file into the
- current directory:</p>
- <pre>
-gunzip -c &lt;SOME-DIR&gt;/&lt;PREFIX&gt;.tar.gz | tar xfp -</pre>
- </item>
- <item>
- <p>Read the <c>README</c> file in the installation directory for
- last minute updates, before proceeding.</p>
- </item>
- <item>
- <p>Run the <c>Install</c> script in the installation directory,
- with the absolute path of the installation directory as argument,</p>
- <pre>
-./Install /usr/local/erlang/otp_r7b</pre>
- <p>and supply answers to the prompts.</p>
- <p>In most cases, there is a default answer in square brackets
- (<c>[]</c>). If the default is satisfactory, just press
- <c><![CDATA[<Return>]]></c>. In general you are only prompted for one thing:</p>
- <list type="bulleted">
- <item>
- <p>"Do you want to use a minimal system startup instead of the
- SASL startup?" <br></br>
-
- In a minimal system, only the Kernel and STDLIB applications
- are loaded and started. If the SASL startup is used, the SASL
- application is included as well. Normally, the minimal system
- is enough.</p>
- </item>
- </list>
- </item>
- <item>
- <p>Make Erlang/OTP available for users, either by putting the path
- <c>/usr/local/erlang/otp_r7b/bin</c> in users <c>$PATH</c>
- variable, or link the executable
- <c>/usr/local/erlang/otp_r7b/bin/erl</c> accordingly, e.g.:</p>
- <pre>
-ln -s /usr/local/erlang/otp_r7b/bin/erl /usr/local/bin/erl </pre>
- </item>
- </list>
- </section>
- </section>
-
<section>
<title>Windows</title>
<section>
<title>Introduction</title>
- <p>The system is delivered as a single <c>.exe</c> file.</p>
- <p>To browse the on-line HTML documentation, Netscape or an equivalent
- browser supporting frames is needed.</p>
+ <p>The system is delivered as a Windows Installer executable.
+ Get it from our <url href="http://www.erlang.org/download.html">download page</url>.</p>
</section>
<section>
- <title>Installation Procedure</title>
+ <title>Installation</title>
<p>The installation procedure is is automated. Double-click the
<c>.exe</c> file icon and follow the instructions.</p>
</section>
+ <section>
+ <title>Verification</title>
+ <list type="bulleted">
+ <item>
+ <p>Start Erlang/OTP by double-clicking on the Erlang shortcut icon on the
+ desktop.</p>
+ <p>Expect a command line window to pop up with an output looking something like this:</p>
+ <pre>
+ Erlang/OTP 17 [erts-6.0] [64-bit] [smp:2:2]
+
+ Eshell V6.0 (abort with ^G)
+ 1></pre>
+ </item>
+ <item>
+ <p>Exit by entering the command <c>halt()</c>,</p>
+ <pre>
+ 2> <input>halt().</input></pre>
+ <p>which will close the Erlang/OTP shell. </p>
+ </item>
+ </list>
+ </section>
</section>
</chapter>
diff --git a/system/doc/installation_guide/part.xml b/system/doc/installation_guide/part.xml
index 19808fd165..02bf98db7c 100644
--- a/system/doc/installation_guide/part.xml
+++ b/system/doc/installation_guide/part.xml
@@ -4,7 +4,7 @@
<part xmlns:xi="http://www.w3.org/2001/XInclude">
<header>
<copyright>
- <year>2000</year><year>2013</year>
+ <year>2000</year><year>2014</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -32,9 +32,7 @@
<p>How to install Erlang/OTP on UNIX or Windows.</p>
</description>
<xi:include href="install-binary.xml"/>
- <xi:include href="verification.xml"/>
<xi:include href="INSTALL.xml"/>
<xi:include href="INSTALL-CROSS.xml"/>
<xi:include href="INSTALL-WIN32.xml"/>
- <xi:include href="MARKDOWN.xml"/>
</part> \ No newline at end of file
diff --git a/system/doc/installation_guide/verification.xml b/system/doc/installation_guide/verification.xml
deleted file mode 100644
index 391ddfb7b8..0000000000
--- a/system/doc/installation_guide/verification.xml
+++ /dev/null
@@ -1,102 +0,0 @@
-<?xml version="1.0" encoding="utf-8" ?>
-<!DOCTYPE chapter SYSTEM "chapter.dtd">
-
-<chapter>
- <header>
- <copyright>
- <year>2000</year><year>2013</year>
- <holder>Ericsson AB. All Rights Reserved.</holder>
- </copyright>
- <legalnotice>
- The contents of this file are subject to the Erlang Public License,
- Version 1.1, (the "License"); you may not use this file except in
- compliance with the License. You should have received a copy of the
- Erlang Public License along with this software. If not, it can be
- retrieved online at http://www.erlang.org/.
-
- Software distributed under the License is distributed on an "AS IS"
- basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- the License for the specific language governing rights and limitations
- under the License.
-
- </legalnotice>
-
- <title>Installation Verification</title>
- <prepared>Peter H&ouml;gfeldt</prepared>
- <responsible>Peter H&ouml;gfeldt</responsible>
- <docno></docno>
- <approved>(Peter H&ouml;gfeldt</approved>
- <checked></checked>
- <date>1997-05-26</date>
- <rev>C</rev>
- <file>verification.xml</file>
- </header>
- <p>This chapter is about verifying your installation by performing
- a few simple tests to see that your system is properly installed.</p>
-
- <section>
- <title>UNIX</title>
- <list type="bulleted">
- <item>
- <p>Start Erlang/OTP from the command line,</p>
- <pre>
- unix> erl</pre>
- <p>Expect the following output:</p>
- <pre>
- Erlang (BEAM) emulator version 5.0.1 [threads]
-
- Eshell V5.0.1 (abort with ^G)
- 1></pre>
- </item>
- <item>
- <p>Start the GS-based toolbar from the Erlang shell, </p>
- <pre>
- 1> <input>toolbar:start().</input></pre>
- <p>and check that the toolbar window pops up.
- </p>
- <p><em>Note:</em> The trailing full stop (<c>"."</c>) is an end marker
- for all commands in the Erlang shell, and must be entered for a
- command to begin execution.</p>
- </item>
- <item>
- <p>Exit by entering the command <c>halt()</c>,</p>
- <pre>
- 2> <input>halt().</input></pre>
- <p>which should end both the toolbar window and the command line window. </p>
- </item>
- </list>
- </section>
-
- <section>
- <title>Windows</title>
- <list type="bulleted">
- <item>
- <p>Start Erlang/OTP by double-clicking on the Erlang shortcut icon on the
- desktop.</p>
- <p>Expect a command line window to pop up with the following output,</p>
- <pre>
- Erlang (BEAM) emulator version 5.0.1 [threads]
-
- Eshell V5.0.1 (abort with ^G)
- 1></pre>
- </item>
- <item>
- <p>Start the GS-based toolbar from the Erlang shell, </p>
- <pre>
- 1> <input>toolbar:start().</input></pre>
- <p>and check that the toolbar window pops up.
- </p>
- <p><em>Note:</em> The trailing full stop (<c>"."</c>) is an end marker
- for all commands in the Erlang shell, and must be entered for a
- command to begin execution.</p>
- </item>
- <item>
- <p>Exit by entering the command <c>halt()</c>,</p>
- <pre>
- 2> <input>halt().</input></pre>
- <p>which should end both the toolbar window and the command line window. </p>
- </item>
- </list>
- </section>
-</chapter>
-
diff --git a/system/doc/installation_guide/xmlfiles.mk b/system/doc/installation_guide/xmlfiles.mk
index 3995c607af..c443334cd7 100644
--- a/system/doc/installation_guide/xmlfiles.mk
+++ b/system/doc/installation_guide/xmlfiles.mk
@@ -1,7 +1,7 @@
#
# %CopyrightBegin%
#
-# Copyright Ericsson AB 2009-2013. All Rights Reserved.
+# Copyright Ericsson AB 2009-2014. All Rights Reserved.
#
# The contents of this file are subject to the Erlang Public License,
# Version 1.1, (the "License"); you may not use this file except in
@@ -18,8 +18,6 @@
#
INST_GUIDE_CHAPTER_FILES = \
install-binary.xml \
- verification.xml \
INSTALL.xml \
INSTALL-CROSS.xml \
- INSTALL-WIN32.xml \
- MARKDOWN.xml
+ INSTALL-WIN32.xml
diff --git a/system/doc/system_principles/system_principles.xml b/system/doc/system_principles/system_principles.xml
index 4f2202fdd1..70c69b1dab 100644
--- a/system/doc/system_principles/system_principles.xml
+++ b/system/doc/system_principles/system_principles.xml
@@ -4,7 +4,7 @@
<chapter>
<header>
<copyright>
- <year>1996</year><year>2013</year>
+ <year>1996</year><year>2014</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -34,13 +34,12 @@
<p>An Erlang runtime system is started with the command <c>erl</c>:</p>
<pre>
% <input>erl</input>
-Erlang (BEAM) emulator version 5.2.3.5 [hipe] [threads:0]
+Erlang/OTP 17 [erts-6.0] [hipe] [smp:8:8]
-Eshell V5.2.3.5 (abort with ^G)
+Eshell V6.0 (abort with ^G)
1> </pre>
<p><c>erl</c> understands a number of command line arguments, see
- <c>erl(1)</c>. A number of them are also described in this
- chapter.</p>
+ <c>erl(1)</c>. A number of them are also described in this chapter.</p>
<p>Application programs can access the values of the command line
arguments by calling one of the functions
<c>init:get_argument(Key)</c>, or <c>init:get_arguments()</c>.