aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--erts/emulator/drivers/common/inet_drv.c119
-rw-r--r--erts/preloaded/ebin/prim_inet.beambin70908 -> 71452 bytes
-rw-r--r--erts/preloaded/src/prim_inet.erl20
-rw-r--r--lib/kernel/doc/src/gen_sctp.xml31
-rw-r--r--lib/kernel/doc/src/gen_tcp.xml6
-rw-r--r--lib/kernel/doc/src/gen_udp.xml17
-rw-r--r--lib/kernel/doc/src/inet.xml51
-rw-r--r--lib/kernel/src/gen_sctp.erl2
-rw-r--r--lib/kernel/src/gen_tcp.erl2
-rw-r--r--lib/kernel/src/gen_udp.erl2
-rw-r--r--lib/kernel/src/inet.erl14
-rw-r--r--lib/kernel/src/inet_int.hrl1
-rw-r--r--lib/kernel/test/gen_sctp_SUITE.erl125
-rw-r--r--lib/kernel/test/gen_tcp_misc_SUITE.erl114
-rw-r--r--lib/kernel/test/gen_udp_SUITE.erl106
15 files changed, 557 insertions, 53 deletions
diff --git a/erts/emulator/drivers/common/inet_drv.c b/erts/emulator/drivers/common/inet_drv.c
index 60db50e80a..7dcb191a83 100644
--- a/erts/emulator/drivers/common/inet_drv.c
+++ b/erts/emulator/drivers/common/inet_drv.c
@@ -86,6 +86,13 @@
#endif
typedef unsigned long long llu_t;
+#ifndef INT16_MIN
+#define INT16_MIN (-32768)
+#endif
+#ifndef INT16_MAX
+#define INT16_MAX (32767)
+#endif
+
#ifdef __WIN32__
#define STRNCASECMP strncasecmp
@@ -581,6 +588,7 @@ static int my_strncasecmp(const char *s1, const char *s2, size_t n)
#define INET_PASSIVE 0 /* false */
#define INET_ACTIVE 1 /* true */
#define INET_ONCE 2 /* true; active once then passive */
+#define INET_MULTI 3 /* true; active N then passive */
/* INET_REQ_GETSTATUS enumeration */
#define INET_F_OPEN 0x0001
@@ -925,6 +933,7 @@ typedef struct {
inet_async_op op_queue[INET_MAX_ASYNC]; /* call queue */
int active; /* 0 = passive, 1 = active, 2 = active once */
+ Sint16 active_count; /* counter for {active,N} */
int stype; /* socket type:
SOCK_STREAM/SOCK_DGRAM/SOCK_SEQPACKET */
int sprotocol; /* socket protocol:
@@ -1160,22 +1169,36 @@ static int packet_inet_output(udp_descriptor* udesc, HANDLE event);
static int async_ref = 0; /* async reference id generator */
#define NEW_ASYNC_ID() ((async_ref++) & 0xffff)
+/* check for transition from active to passive */
+#define INET_CHECK_ACTIVE_TO_PASSIVE(inet) \
+ do { \
+ if ((inet)->active == INET_ONCE) \
+ (inet)->active = INET_PASSIVE; \
+ else if ((inet)->active == INET_MULTI && --((inet)->active_count) == 0) { \
+ (inet)->active = INET_PASSIVE; \
+ packet_passive_message(inet); \
+ } \
+ } while (0)
static ErlDrvTermData am_ok;
static ErlDrvTermData am_tcp;
static ErlDrvTermData am_udp;
static ErlDrvTermData am_error;
+static ErlDrvTermData am_einval;
static ErlDrvTermData am_inet_async;
static ErlDrvTermData am_inet_reply;
static ErlDrvTermData am_timeout;
static ErlDrvTermData am_closed;
+static ErlDrvTermData am_tcp_passive;
static ErlDrvTermData am_tcp_closed;
static ErlDrvTermData am_tcp_error;
+static ErlDrvTermData am_udp_passive;
static ErlDrvTermData am_udp_error;
static ErlDrvTermData am_empty_out_q;
static ErlDrvTermData am_ssl_tls;
#ifdef HAVE_SCTP
static ErlDrvTermData am_sctp;
+static ErlDrvTermData am_sctp_passive;
static ErlDrvTermData am_sctp_error;
static ErlDrvTermData am_true;
static ErlDrvTermData am_false;
@@ -1185,6 +1208,7 @@ static ErlDrvTermData am_list;
static ErlDrvTermData am_binary;
static ErlDrvTermData am_active;
static ErlDrvTermData am_once;
+static ErlDrvTermData am_multi;
static ErlDrvTermData am_buffer;
static ErlDrvTermData am_linger;
static ErlDrvTermData am_recbuf;
@@ -3337,6 +3361,34 @@ static int packet_binary_message
}
/*
+** active mode message: send active-to-passive transition message
+** {tcp_passive, S} or
+** {udp_passive, S} or
+** {sctp_passive, S}
+*/
+ static int packet_passive_message(inet_descriptor* desc)
+ {
+ ErlDrvTermData spec[6];
+ int i = 0;
+
+ DEBUGF(("packet_passive_message(%ld):\r\n", (long)desc->port));
+
+ if (desc->sprotocol == IPPROTO_TCP)
+ i = LOAD_ATOM(spec, i, am_tcp_passive);
+ else {
+#ifdef HAVE_SCTP
+ i = LOAD_ATOM(spec, i, IS_SCTP(desc) ? am_sctp_passive : am_udp_passive);
+#else
+ i = LOAD_ATOM(spec, i, am_udp_passive);
+#endif
+ }
+ i = LOAD_PORT(spec, i, desc->dport);
+ i = LOAD_TUPLE(spec, i, 2);
+ ASSERT(i <= 6);
+ return erl_drv_output_term(desc->dport, spec, i);
+ }
+
+/*
** send active message {udp_error|sctp_error, S, Error}
*/
static int packet_error_message(udp_descriptor* udesc, int err)
@@ -3378,7 +3430,7 @@ static int tcp_reply_data(tcp_descriptor* desc, char* buf, int len)
int code;
const char* body = buf;
int bodylen = len;
-
+
packet_get_body(desc->inet.htype, &body, &bodylen);
if (desc->inet.deliver == INET_DELIVER_PORT) {
@@ -3396,8 +3448,7 @@ static int tcp_reply_data(tcp_descriptor* desc, char* buf, int len)
if (code < 0)
return code;
- if (desc->inet.active == INET_ONCE)
- desc->inet.active = INET_PASSIVE;
+ INET_CHECK_ACTIVE_TO_PASSIVE(INETP(desc));
return code;
}
@@ -3424,8 +3475,7 @@ tcp_reply_binary_data(tcp_descriptor* desc, ErlDrvBinary* bin, int offs, int len
}
if (code < 0)
return code;
- if (desc->inet.active == INET_ONCE)
- desc->inet.active = INET_PASSIVE;
+ INET_CHECK_ACTIVE_TO_PASSIVE(INETP(desc));
return code;
}
@@ -3448,8 +3498,7 @@ packet_reply_binary_data(inet_descriptor* desc, unsigned int hsz,
code = packet_binary_message(desc, bin, offs, len, extra);
if (code < 0)
return code;
- if (desc->active == INET_ONCE)
- desc->active = INET_PASSIVE;
+ INET_CHECK_ACTIVE_TO_PASSIVE(desc);
return code;
}
}
@@ -3494,6 +3543,7 @@ sock_init(void) /* May be called multiple times. */
#ifdef HAVE_SCTP
static void inet_init_sctp(void) {
INIT_ATOM(sctp);
+ INIT_ATOM(sctp_passive);
INIT_ATOM(sctp_error);
INIT_ATOM(true);
INIT_ATOM(false);
@@ -3503,6 +3553,7 @@ static void inet_init_sctp(void) {
INIT_ATOM(binary);
INIT_ATOM(active);
INIT_ATOM(once);
+ INIT_ATOM(multi);
INIT_ATOM(buffer);
INIT_ATOM(linger);
INIT_ATOM(recbuf);
@@ -3628,12 +3679,15 @@ static int inet_init()
INIT_ATOM(tcp);
INIT_ATOM(udp);
INIT_ATOM(error);
+ INIT_ATOM(einval);
INIT_ATOM(inet_async);
INIT_ATOM(inet_reply);
INIT_ATOM(timeout);
INIT_ATOM(closed);
+ INIT_ATOM(tcp_passive);
INIT_ATOM(tcp_closed);
INIT_ATOM(tcp_error);
+ INIT_ATOM(udp_passive);
INIT_ATOM(udp_error);
INIT_ATOM(empty_out_q);
INIT_ATOM(ssl_tls);
@@ -5508,8 +5562,25 @@ static int inet_set_opts(inet_descriptor* desc, char* ptr, int len)
case INET_LOPT_ACTIVE:
DEBUGF(("inet_set_opts(%ld): s=%d, ACTIVE=%d\r\n",
- (long)desc->port, desc->s,ival));
+ (long)desc->port, desc->s, ival));
desc->active = ival;
+ if (desc->active == INET_MULTI) {
+ long ac = desc->active_count;
+ Sint16 nval = get_int16(ptr);
+ ptr += 2;
+ len -= 2;
+ ac += nval;
+ if (ac > INT16_MAX || ac < INT16_MIN)
+ return -1;
+ desc->active_count += nval;
+ if (desc->active_count < 0)
+ desc->active_count = 0;
+ if (desc->active_count == 0) {
+ desc->active = INET_PASSIVE;
+ packet_passive_message(desc);
+ }
+ } else
+ desc->active_count = 0;
if ((desc->stype == SOCK_STREAM) && (desc->active != INET_PASSIVE) &&
(desc->state == INET_STATE_CLOSED)) {
tcp_closed_message((tcp_descriptor *) desc);
@@ -5820,7 +5891,8 @@ static int inet_set_opts(inet_descriptor* desc, char* ptr, int len)
/* XXX fprintf(stderr,"desc->htype == %d, old_htype == %d,
desc->active == %d, old_active == %d\r\n",(int)desc->htype,
(int) old_htype, (int) desc->active, (int) old_active );*/
- return 1+(desc->htype == old_htype && desc->active == INET_ONCE);
+ return 1+(desc->htype == old_htype &&
+ (desc->active == INET_ONCE || desc->active == INET_MULTI));
}
return 0;
}
@@ -5953,6 +6025,21 @@ static int sctp_set_opts(inet_descriptor* desc, char* ptr, int len)
case INET_LOPT_ACTIVE:
desc->active = get_int32(curr); curr += 4;
+ if (desc->active == INET_MULTI) {
+ long ac = desc->active_count;
+ Sint16 nval = get_int16(curr); curr += 2;
+ ac += nval;
+ if (ac > INT16_MAX || ac < INT16_MIN)
+ return -1;
+ desc->active_count += nval;
+ if (desc->active_count < 0)
+ desc->active_count = 0;
+ if (desc->active_count == 0) {
+ desc->active = INET_PASSIVE;
+ packet_passive_message(desc);
+ }
+ } else
+ desc->active_count = 0;
res = 0;
continue;
@@ -6475,6 +6562,11 @@ static ErlDrvSSizeT inet_fill_opts(inet_descriptor* desc,
case INET_LOPT_ACTIVE:
*ptr++ = opt;
put_int32(desc->active, ptr);
+ if (desc->active == INET_MULTI) {
+ PLACE_FOR(2,ptr);
+ put_int16(desc->active_count, ptr);
+ ptr += 2;
+ }
continue;
case INET_LOPT_PACKET:
*ptr++ = opt;
@@ -6847,7 +6939,10 @@ static ErlDrvSSizeT sctp_fill_opts(inet_descriptor* desc,
}
case INET_LOPT_ACTIVE:
{
- PLACE_FOR(spec, i, 2*LOAD_ATOM_CNT + LOAD_TUPLE_CNT);
+ if (desc->active == INET_MULTI)
+ PLACE_FOR(spec, i, LOAD_ATOM_CNT + LOAD_INT_CNT + LOAD_TUPLE_CNT);
+ else
+ PLACE_FOR(spec, i, 2*LOAD_ATOM_CNT + LOAD_TUPLE_CNT);
i = LOAD_ATOM (spec, i, am_active);
switch (desc->active)
{
@@ -6860,6 +6955,9 @@ static ErlDrvSSizeT sctp_fill_opts(inet_descriptor* desc,
case INET_ONCE :
{ i = LOAD_ATOM (spec, i, am_once); break; }
+ case INET_MULTI :
+ { i = LOAD_INT(spec, i, desc->active_count); break; }
+
default: ASSERT (0);
}
i = LOAD_TUPLE (spec, i, 2);
@@ -7656,6 +7754,7 @@ static ErlDrvData inet_start(ErlDrvPort port, int size, int protocol)
socket */
desc->deliver = INET_DELIVER_TERM; /* standard term format */
desc->active = INET_PASSIVE; /* start passive */
+ desc->active_count = 0;
desc->oph = NULL;
desc->opt = NULL;
diff --git a/erts/preloaded/ebin/prim_inet.beam b/erts/preloaded/ebin/prim_inet.beam
index 2be5ae1d96..deed86816e 100644
--- a/erts/preloaded/ebin/prim_inet.beam
+++ b/erts/preloaded/ebin/prim_inet.beam
Binary files differ
diff --git a/erts/preloaded/src/prim_inet.erl b/erts/preloaded/src/prim_inet.erl
index fa621681f3..69eed716ff 100644
--- a/erts/preloaded/src/prim_inet.erl
+++ b/erts/preloaded/src/prim_inet.erl
@@ -1237,7 +1237,8 @@ type_opt_1(buffer) -> int;
type_opt_1(active) ->
{enum,[{false, ?INET_PASSIVE},
{true, ?INET_ACTIVE},
- {once, ?INET_ONCE}]};
+ {once, ?INET_ONCE},
+ {multi, ?INET_MULTI}]};
type_opt_1(packet) ->
{enum,[{0, ?TCP_PB_RAW},
{1, ?TCP_PB_1},
@@ -1716,11 +1717,14 @@ encode_opt_val(Opts) ->
Reason -> {error,Reason}
end.
+%% {active, once} and {active, N} are specially optimized because they will
+%% be used for every packet or every N packets, not only once when
+%% initializing the socket. Measurements show that this optimization is
+%% worthwhile.
enc_opt_val([{active,once}|Opts], Acc) ->
- %% Specially optimized because {active,once} will be used for
- %% every packet, not only once when initializing the socket.
- %% Measurements show that this optimization is worthwhile.
enc_opt_val(Opts, [<<?INET_LOPT_ACTIVE:8,?INET_ONCE:32>>|Acc]);
+enc_opt_val([{active,N}|Opts], Acc) when is_integer(N), N < 32768, N >= -32768 ->
+ enc_opt_val(Opts, [<<?INET_LOPT_ACTIVE:8,?INET_MULTI:32,N:16>>|Acc]);
enc_opt_val([{raw,P,O,B}|Opts], Acc) ->
enc_opt_val(Opts, Acc, raw, {P,O,B});
enc_opt_val([{Opt,Val}|Opts], Acc) ->
@@ -1810,6 +1814,14 @@ dec_opt_val([]) -> [].
dec_opt_val(Buf, raw, Type) ->
{{P,O,B},T} = dec_value(Type, Buf),
[{raw,P,O,B}|dec_opt_val(T)];
+dec_opt_val(Buf, active, Type) ->
+ case dec_value(Type, Buf) of
+ {multi,[M0,M1|T]} ->
+ <<N:16>> = list_to_binary([M0,M1]),
+ [{active,N}|dec_opt_val(T)];
+ {Val,T} ->
+ [{active,Val}|dec_opt_val(T)]
+ end;
dec_opt_val(Buf, Opt, Type) ->
{Val,T} = dec_value(Type, Buf),
[{Opt,Val}|dec_opt_val(T)].
diff --git a/lib/kernel/doc/src/gen_sctp.xml b/lib/kernel/doc/src/gen_sctp.xml
index dacea7a239..986260638d 100644
--- a/lib/kernel/doc/src/gen_sctp.xml
+++ b/lib/kernel/doc/src/gen_sctp.xml
@@ -496,9 +496,11 @@
orthogonal to the sets of TCP, UDP and generic INET options:
only those options which are explicitly listed below are allowed
for SCTP sockets. Options can be set on the socket using
- <c>gen_sctp:open/1,2</c> or <c>inet:setopts/2</c>,
- retrieved using <c>inet:getopts/2</c>, and when calling
- <c>gen_sctp:connect/4,5</c> options can be changed.</p>
+ <seealso marker="#open/1"><c>gen_sctp:open/1,2</c></seealso>
+ or <seealso marker="inet#setopts/2"><c>inet:setopts/2</c></seealso>,
+ retrieved using <seealso marker="inet#getopts/2"><c>inet:getopts/2</c></seealso>,
+ and when calling <seealso marker="#connect/4"><c>gen_sctp:connect/4,5</c></seealso>
+ options can be changed.</p>
<marker id="option-binary"></marker>
<marker id="option-list"></marker>
<taglist>
@@ -507,7 +509,7 @@
<p>Determines the type of data returned from <c>gen_sctp:recv/1,2</c>.</p>
<marker id="option-active"></marker>
</item>
- <tag><c>{active, true|false|once}</c></tag>
+ <tag><c>{active, true|false|once|N}</c></tag>
<item>
<list type="bulleted">
<item>
@@ -524,11 +526,28 @@
</item>
<item>
<p>If <c>once</c>, only one message is automatically placed
- in the message queue, after that the mode is automatically
- re-set to passive. This provides flow control as well as
+ in the message queue, and after that the mode is automatically
+ reset to passive. This provides flow control as well as
the possibility for the receiver to listen for its incoming
SCTP data interleaved with other inter-process messages.</p>
</item>
+ <item>
+ <p>If <c>active</c> is specified as an integer <c>N</c> in the
+ range -32768 to 32767 (inclusive), then that number is added to
+ the socket's count of the number of data messages to be
+ delivered to the controlling process. If the result of the
+ addition would be negative, the count is set to 0. Once the
+ count reaches 0, either through the delivery of messages or by
+ being explicitly set with <seealso
+ marker="inet#setopts/2">inet:setopts/2</seealso>, the socket's
+ mode is automatically reset to passive (<c>{active,
+ false}</c>) mode. When a socket in this active mode transitions to
+ passive mode, the message <c>{sctp_passive, Socket}</c> is sent
+ to the controlling process to notify it that if it wants to
+ receive more data messages from the socket, it must call
+ <seealso marker="inet#setopts/2">inet:setopts/2</seealso> to set
+ the socket back into an active mode.</p>
+ </item>
</list>
</item>
<tag><c>{tos, integer()}</c></tag>
diff --git a/lib/kernel/doc/src/gen_tcp.xml b/lib/kernel/doc/src/gen_tcp.xml
index 7afd73f4bf..dbd0d3c815 100644
--- a/lib/kernel/doc/src/gen_tcp.xml
+++ b/lib/kernel/doc/src/gen_tcp.xml
@@ -148,6 +148,12 @@ do_recv(Sock, Bs) ->
as messages:</p>
<code type="none">
{tcp, Socket, Data}</code>
+ <p>If the socket is in <c>{active, N}</c> mode (see <seealso marker="inet#setopts/2">
+ inet:setopts/2</seealso> for details) and its message counter
+ drops to 0, the following message is delivered to indicate that the
+ socket has transitioned to passive (<c>{active, false}</c>) mode:</p>
+ <code type="none">
+{tcp_passive, Socket}</code>
<p>If the socket is closed, the following message is delivered:</p>
<code type="none">
{tcp_closed, Socket}</code>
diff --git a/lib/kernel/doc/src/gen_udp.xml b/lib/kernel/doc/src/gen_udp.xml
index faca31e928..503725fe18 100644
--- a/lib/kernel/doc/src/gen_udp.xml
+++ b/lib/kernel/doc/src/gen_udp.xml
@@ -145,14 +145,23 @@
<seealso marker="inet#setopts/2">inet:setopts/2</seealso>.</p>
</item>
</taglist>
- <p>The returned socket <c><anno>Socket</anno></c> is used to send packets
- from this port with <c>send/4</c>. When UDP packets arrive at
- the opened port, they are delivered as messages:</p>
+ <p>The returned socket <c><anno>Socket</anno></c> is used to send
+ packets from this port with <c>send/4</c>. When UDP packets arrive
+ at the opened port, if the socket is in an active mode the packets
+ are delivered as messages to the controlling process:</p>
<code type="none">
{udp, Socket, IP, InPortNo, Packet}</code>
- <p>Note that arriving UDP packets that are longer than
+ <p>If the socket is not in an active mode, data can be
+ retrieved via the <seealso marker="#recv/2">recv/2,3</seealso> calls.
+ Note that arriving UDP packets that are longer than
the receive buffer option specifies, might be truncated
without warning.</p>
+ <p>When a socket in <c>{active, N}</c> mode (see <seealso marker="inet#setopts/2">
+ inet:setopts/2</seealso> for details) transitions to passive
+ (<c>{active, false}</c>) mode, the controlling process is notified by a
+ message of the following form:</p>
+ <code type="none">
+{udp_passive, Socket}</code>
<p><c>IP</c> and <c>InPortNo</c> define the address from which
<c>Packet</c> came. <c>Packet</c> is a list of bytes if
the option <c>list</c> was specified. <c>Packet</c> is a
diff --git a/lib/kernel/doc/src/inet.xml b/lib/kernel/doc/src/inet.xml
index e1b0b34888..fb8bf32978 100644
--- a/lib/kernel/doc/src/inet.xml
+++ b/lib/kernel/doc/src/inet.xml
@@ -456,47 +456,66 @@ fe80::204:acff:fe17:bf38
<p>Sets one or more options for a socket. The following options
are available:</p>
<taglist>
- <tag><c>{active, true | false | once}</c></tag>
+ <tag><c>{active, true | false | once | N}</c></tag>
<item>
<p>If the value is <c>true</c>, which is the default,
everything received from the socket will be sent as
messages to the receiving process. If the value is
<c>false</c> (passive mode), the process must explicitly
- receive incoming data by calling <c>gen_tcp:recv/2,3</c>
- or <c>gen_udp:recv/2,3</c> (depending on the type of
- socket).</p>
+ receive incoming data by calling
+ <seealso marker="gen_tcp#recv/2"><c>gen_tcp:recv/2,3</c></seealso>,
+ <seealso marker="gen_udp#recv/2"><c>gen_udp:recv/2,3</c></seealso>
+ or <seealso marker="gen_sctp#recv/1"><c>gen_sctp:recv/1,2</c></seealso>
+ (depending on the type of socket).</p>
<p>If the value is <c>once</c> (<c>{active, once}</c>),
<em>one</em> data message from the socket will be sent
to the process. To receive one more message,
<c>setopts/2</c> must be called again with the
<c>{active, once}</c> option.</p>
- <p>When using <c>{active, once}</c>, the socket changes
- behaviour automatically when data is received. This can
- sometimes be confusing in combination with connection
- oriented sockets (i.e. <c>gen_tcp</c>) as a socket with
- <c>{active, false}</c> behaviour reports closing
+ <p>If the value is an integer <c>N</c> in the range -32768 to 32767
+ (inclusive), the value is added to the socket's count of data
+ messages sent to the controlling process. A socket's default
+ message count is 0. If a negative value is specified and its
+ magnitude is equal to or greater than the socket's current
+ message count, the socket's message count is set to 0. Once
+ the socket's message count reaches 0, either due to sending
+ received data messages to the process or by being explicitly set,
+ the process is then notified by a special message, specific to
+ the type of socket, that the socket has entered passive
+ mode. Once the socket enters passive mode, to receive more
+ messages <c>setopts/2</c> must be called again to set the
+ socket back into an active mode.</p>
+ <p>When using <c>{active, once}</c> or <c>{active, N}</c>, the
+ socket changes behaviour automatically when data is received.
+ This can sometimes be confusing in combination with
+ connection-oriented sockets (i.e. <c>gen_tcp</c>) as a socket
+ with <c>{active, false}</c> behaviour reports closing
differently than a socket with <c>{active, true}</c>
behaviour. To make programming easier, a socket where
the peer closed and this was detected while in
<c>{active, false}</c> mode, will still generate the
message
- <c>{tcp_closed,Socket}</c> when set to <c>{active, once}</c> or <c>{active, true}</c> mode. It is therefore
+ <c>{tcp_closed,Socket}</c> when set to <c>{active, once}</c>,
+ <c>{active, true}</c> or <c>{active, N}</c> mode. It is therefore
safe to assume that the message
<c>{tcp_closed,Socket}</c>, possibly followed by socket
port termination (depending on the <c>exit_on_close</c>
option) will eventually appear when a socket changes
back and forth between <c>{active, true}</c> and
- <c>{active, false}</c> mode. However,
+ <c>{active, false}</c> mode. However,
<em>when</em> peer closing is detected is all up to the
underlying TCP/IP stack and protocol.</p>
- <p>Note that <c>{active,true}</c> mode provides no flow
+ <p>Note that <c>{active, true}</c> mode provides no flow
control; a fast sender could easily overflow the
- receiver with incoming messages. Use active mode only if
+ receiver with incoming messages. The same is true of
+ <c>{active, N}</c> mode while the message count is greater
+ than zero. Use active mode only if
your high-level protocol provides its own flow control
(for instance, acknowledging received messages) or the
- amount of data exchanged is small. <c>{active,false}</c>
- mode or use of the <c>{active, once}</c> mode provides
- flow control; the other side will not be able send
+ amount of data exchanged is small. <c>{active, false}</c>
+ mode, use of the <c>{active, once}</c> mode or <c>{active, N}</c>
+ mode with values of <c>N</c> appropriate for the application
+ provides flow control; the other side will not be able send
faster than the receiver can read.</p>
</item>
diff --git a/lib/kernel/src/gen_sctp.erl b/lib/kernel/src/gen_sctp.erl
index 0d005eb651..23a698f9b2 100644
--- a/lib/kernel/src/gen_sctp.erl
+++ b/lib/kernel/src/gen_sctp.erl
@@ -36,7 +36,7 @@
-type assoc_id() :: term().
-type option() ::
- {active, true | false | once} |
+ {active, true | false | once | -32768..32767} |
{buffer, non_neg_integer()} |
{dontroute, boolean()} |
{high_msgq_watermark, pos_integer()} |
diff --git a/lib/kernel/src/gen_tcp.erl b/lib/kernel/src/gen_tcp.erl
index 96026aa428..bc8ffbe5e3 100644
--- a/lib/kernel/src/gen_tcp.erl
+++ b/lib/kernel/src/gen_tcp.erl
@@ -30,7 +30,7 @@
-include("file.hrl").
-type option() ::
- {active, true | false | once} |
+ {active, true | false | once | -32768..32767} |
{buffer, non_neg_integer()} |
{delay_send, boolean()} |
{deliver, port | term} |
diff --git a/lib/kernel/src/gen_udp.erl b/lib/kernel/src/gen_udp.erl
index e82b11d2ef..70dceb3679 100644
--- a/lib/kernel/src/gen_udp.erl
+++ b/lib/kernel/src/gen_udp.erl
@@ -26,7 +26,7 @@
-include("inet_int.hrl").
-type option() ::
- {active, true | false | once} |
+ {active, true | false | once | -32768..32767} |
{add_membership, {inet:ip_address(), inet:ip_address()}} |
{broadcast, boolean()} |
{buffer, non_neg_integer()} |
diff --git a/lib/kernel/src/inet.erl b/lib/kernel/src/inet.erl
index 9cfd3819f0..7261d6486f 100644
--- a/lib/kernel/src/inet.erl
+++ b/lib/kernel/src/inet.erl
@@ -667,6 +667,9 @@ con_opt([Opt | Opts], R, As) ->
false ->
{error, badarg}
end;
+ {active,N} when is_integer(N), N < 32768, N >= -32768 ->
+ NOpts = lists:keydelete(active, 1, R#connect_opts.opts),
+ con_opt(Opts, R#connect_opts { opts = [{active,N}|NOpts] }, As);
{Name,Val} when is_atom(Name) -> con_add(Name, Val, R, Opts, As);
_ -> {error, badarg}
end;
@@ -733,6 +736,9 @@ list_opt([Opt | Opts], R, As) ->
false ->
{error, badarg}
end;
+ {active,N} when is_integer(N), N < 32768, N >= -32768 ->
+ NOpts = lists:keydelete(active, 1, R#listen_opts.opts),
+ list_opt(Opts, R#listen_opts { opts = [{active,N}|NOpts] }, As);
{Name,Val} when is_atom(Name) -> list_add(Name, Val, R, Opts, As);
_ -> {error, badarg}
end;
@@ -787,6 +793,9 @@ udp_opt([Opt | Opts], R, As) ->
false ->
{error, badarg}
end;
+ {active,N} when is_integer(N), N < 32768, N >= -32768 ->
+ NOpts = lists:keydelete(active, 1, R#udp_opts.opts),
+ udp_opt(Opts, R#udp_opts { opts = [{active,N}|NOpts] }, As);
{Name,Val} when is_atom(Name) -> udp_add(Name, Val, R, Opts, As);
_ -> {error, badarg}
end;
@@ -805,7 +814,7 @@ udp_add(Name, Val, R, Opts, As) ->
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Currently supported options include:
% (*) {mode, list|binary} or just list|binary
-% (*) {active, true|false|once}
+% (*) {active, true|false|once|N}
% (*) {sctp_module, inet_sctp|inet6_sctp} or just inet|inet6
% (*) options set via setsockopt.
% The full list is below in sctp_options/0 .
@@ -867,6 +876,9 @@ sctp_opt([Opt|Opts], Mod, R, As) ->
false ->
{error, badarg}
end;
+ {active,N} when is_integer(N), N < 32768, N >= -32768 ->
+ NOpts = lists:keydelete(active, 1, R#sctp_opts.opts),
+ sctp_opt(Opts, Mod, R#sctp_opts { opts = [{active,N}|NOpts] }, As);
{Name,Val} -> sctp_opt (Opts, Mod, R, As, Name, Val);
_ -> {error,badarg}
end;
diff --git a/lib/kernel/src/inet_int.hrl b/lib/kernel/src/inet_int.hrl
index 18a4a61b2f..024a5fd3b6 100644
--- a/lib/kernel/src/inet_int.hrl
+++ b/lib/kernel/src/inet_int.hrl
@@ -46,6 +46,7 @@
-define(INET_PASSIVE, 0).
-define(INET_ACTIVE, 1).
-define(INET_ONCE, 2). % Active once then passive
+-define(INET_MULTI, 3). % Active N then passive
%% state codes (getstatus, INET_REQ_GETSTATUS)
-define(INET_F_OPEN, 16#0001).
diff --git a/lib/kernel/test/gen_sctp_SUITE.erl b/lib/kernel/test/gen_sctp_SUITE.erl
index e89cb44797..6dad52395b 100644
--- a/lib/kernel/test/gen_sctp_SUITE.erl
+++ b/lib/kernel/test/gen_sctp_SUITE.erl
@@ -35,8 +35,9 @@
open_unihoming_ipv6_socket/1,
open_multihoming_ipv6_socket/1,
open_multihoming_ipv4_and_ipv6_socket/1,
- basic_stream/1, xfer_stream_min/1, peeloff_active_once/1,
- peeloff_active_true/1, buffers/1]).
+ basic_stream/1, xfer_stream_min/1, active_n/1,
+ peeloff_active_once/1, peeloff_active_true/1, peeloff_active_n/1,
+ buffers/1]).
suite() -> [{ct_hooks,[ts_install_cth]}].
@@ -46,9 +47,9 @@ all() ->
open_multihoming_ipv4_socket,
open_unihoming_ipv6_socket,
open_multihoming_ipv6_socket,
- open_multihoming_ipv4_and_ipv6_socket,
+ open_multihoming_ipv4_and_ipv6_socket, active_n,
basic_stream, xfer_stream_min, peeloff_active_once,
- peeloff_active_true, buffers].
+ peeloff_active_true, peeloff_active_n, buffers].
groups() ->
[].
@@ -767,6 +768,106 @@ implicit_inet6(S1, Addr) ->
end,
?line ok = gen_sctp:close(S2).
+active_n(doc) ->
+ "Verify {active,N} socket management";
+active_n(suite) ->
+ [];
+active_n(Config) when is_list(Config) ->
+ N = 3,
+ S1 = ok(gen_sctp:open([{active,N}])),
+ [{active,N}] = ok(inet:getopts(S1, [active])),
+ ok = inet:setopts(S1, [{active,-N}]),
+ receive
+ {sctp_passive, S1} -> ok
+ after
+ 5000 ->
+ exit({error,sctp_passive_failure})
+ end,
+ [{active,false}] = ok(inet:getopts(S1, [active])),
+ ok = inet:setopts(S1, [{active,0}]),
+ receive
+ {sctp_passive, S1} -> ok
+ after
+ 5000 ->
+ exit({error,sctp_passive_failure})
+ end,
+ ok = inet:setopts(S1, [{active,32767}]),
+ {error,einval} = inet:setopts(S1, [{active,1}]),
+ {error,einval} = inet:setopts(S1, [{active,-32769}]),
+ ok = inet:setopts(S1, [{active,-32768}]),
+ receive
+ {sctp_passive, S1} -> ok
+ after
+ 5000 ->
+ exit({error,sctp_passive_failure})
+ end,
+ [{active,false}] = ok(inet:getopts(S1, [active])),
+ ok = inet:setopts(S1, [{active,N}]),
+ ok = inet:setopts(S1, [{active,true}]),
+ [{active,true}] = ok(inet:getopts(S1, [active])),
+ receive
+ _ -> exit({error,active_n})
+ after
+ 0 ->
+ ok
+ end,
+ ok = inet:setopts(S1, [{active,N}]),
+ ok = inet:setopts(S1, [{active,once}]),
+ [{active,once}] = ok(inet:getopts(S1, [active])),
+ receive
+ _ -> exit({error,active_n})
+ after
+ 0 ->
+ ok
+ end,
+ {error,einval} = inet:setopts(S1, [{active,32768}]),
+ ok = inet:setopts(S1, [{active,false}]),
+ [{active,false}] = ok(inet:getopts(S1, [active])),
+ ok = gen_sctp:listen(S1, true),
+ S1Port = ok(inet:port(S1)),
+ S2 = ok(gen_sctp:open(0, [{active,false}])),
+ Assoc = ok(gen_sctp:connect(S2, "localhost", S1Port, [])),
+ ok = inet:setopts(S1, [{active,N}]),
+ [{active,N}] = ok(inet:getopts(S1, [active])),
+ LoopFun = fun(Count, Count, _Fn) ->
+ receive
+ {sctp_passive,S1} ->
+ ok
+ after
+ 5000 ->
+ exit({error,timeout})
+ end;
+ (I, Count, Fn) ->
+ Msg = list_to_binary("message "++integer_to_list(I)),
+ ok = gen_sctp:send(S2, Assoc, 0, Msg),
+ receive
+ {sctp,S1,_,_,{[SR],Msg}} when is_record(SR, sctp_sndrcvinfo) ->
+ Fn(I+1, Count, Fn);
+ {sctp,S1,_,_,_} ->
+ %% ignore non-data messages
+ ok = inet:setopts(S1, [{active,1}]),
+ Fn(I, Count, Fn);
+ Other ->
+ exit({unexpected, Other})
+ after
+ 5000 ->
+ exit({error,timeout})
+ end
+ end,
+ ok = LoopFun(1, N, LoopFun),
+ S3 = ok(gen_sctp:open([{active,0}])),
+ receive
+ {sctp_passive,S3} ->
+ [{active,false}] = ok(inet:getopts(S3, [active]))
+ after
+ 5000 ->
+ exit({error,udp_passive})
+ end,
+ ok = gen_sctp:close(S3),
+ ok = gen_sctp:close(S2),
+ ok = gen_sctp:close(S1),
+ ok.
+
basic_stream(doc) ->
"Hello world stream socket";
basic_stream(suite) ->
@@ -941,6 +1042,14 @@ peeloff_active_true(suite) ->
peeloff_active_true(Config) ->
peeloff(Config, [{active,true}]).
+peeloff_active_n(doc) ->
+ "Peel off an SCTP stream socket ({active,N})";
+peeloff_active_n(suite) ->
+ [];
+
+peeloff_active_n(Config) ->
+ peeloff(Config, [{active,1}]).
+
peeloff(Config, SockOpts) when is_list(Config) ->
?line Addr = {127,0,0,1},
?line Stream = 0,
@@ -1519,7 +1628,13 @@ s_loop(Socket, Timeout, Parent, Handler, State) ->
end.
again(Socket) ->
- inet:setopts(Socket, [{active,once}]).
+ receive
+ {sctp_passive,Socket} ->
+ [{active, false}] = ok(inet:getopts(Socket, [active])),
+ ok = inet:setopts(Socket,[{active,1}])
+ after 0 ->
+ ok = inet:setopts(Socket, [{active,once}])
+ end.
gb_push(Key, Val, GBT) ->
case gb_trees:lookup(Key, GBT) of
diff --git a/lib/kernel/test/gen_tcp_misc_SUITE.erl b/lib/kernel/test/gen_tcp_misc_SUITE.erl
index ee271fbdfa..ee8bfcceb1 100644
--- a/lib/kernel/test/gen_tcp_misc_SUITE.erl
+++ b/lib/kernel/test/gen_tcp_misc_SUITE.erl
@@ -25,7 +25,7 @@
-export([all/0, suite/0,groups/0,init_per_suite/1, end_per_suite/1,
init_per_group/2,end_per_group/2,
controlling_process/1, controlling_process_self/1,
- no_accept/1, close_with_pending_output/1,
+ no_accept/1, close_with_pending_output/1, active_n/1,
data_before_close/1, iter_max_socks/1, get_status/1,
passive_sockets/1, accept_closed_by_other_process/1,
init_per_testcase/2, end_per_testcase/2,
@@ -70,7 +70,7 @@ suite() -> [{ct_hooks,[ts_install_cth]}].
all() ->
[controlling_process, controlling_process_self, no_accept,
close_with_pending_output, data_before_close,
- iter_max_socks, passive_sockets,
+ iter_max_socks, passive_sockets, active_n,
accept_closed_by_other_process, otp_3924, closed_socket,
shutdown_active, shutdown_passive, shutdown_pending,
default_options, http_bad_packet, busy_send,
@@ -407,6 +407,114 @@ send_loop(Sock, Data, Left) ->
ok = gen_tcp:send(Sock, Data),
send_loop(Sock, Data, Left-1).
+%% Test {active,N} option
+active_n(doc) ->
+ ["Verify operation of the {active,N} option."];
+active_n(suite) -> [];
+active_n(Config) when is_list(Config) ->
+ N = 3,
+ LS = ok(gen_tcp:listen(0, [{active,N}])),
+ [{active,N}] = ok(inet:getopts(LS, [active])),
+ ok = inet:setopts(LS, [{active,-N}]),
+ receive
+ {tcp_passive, LS} -> ok
+ after
+ 5000 ->
+ exit({error,tcp_passive_failure})
+ end,
+ [{active,false}] = ok(inet:getopts(LS, [active])),
+ ok = inet:setopts(LS, [{active,0}]),
+ receive
+ {tcp_passive, LS} -> ok
+ after
+ 5000 ->
+ exit({error,tcp_passive_failure})
+ end,
+ ok = inet:setopts(LS, [{active,32767}]),
+ {error,einval} = inet:setopts(LS, [{active,1}]),
+ {error,einval} = inet:setopts(LS, [{active,-32769}]),
+ ok = inet:setopts(LS, [{active,-32768}]),
+ receive
+ {tcp_passive, LS} -> ok
+ after
+ 5000 ->
+ exit({error,tcp_passive_failure})
+ end,
+ [{active,false}] = ok(inet:getopts(LS, [active])),
+ ok = inet:setopts(LS, [{active,N}]),
+ ok = inet:setopts(LS, [{active,true}]),
+ [{active,true}] = ok(inet:getopts(LS, [active])),
+ receive
+ _ -> exit({error,active_n})
+ after
+ 0 ->
+ ok
+ end,
+ ok = inet:setopts(LS, [{active,N}]),
+ ok = inet:setopts(LS, [{active,once}]),
+ [{active,once}] = ok(inet:getopts(LS, [active])),
+ receive
+ _ -> exit({error,active_n})
+ after
+ 0 ->
+ ok
+ end,
+ {error,einval} = inet:setopts(LS, [{active,32768}]),
+ ok = inet:setopts(LS, [{active,false}]),
+ [{active,false}] = ok(inet:getopts(LS, [active])),
+ Port = ok(inet:port(LS)),
+ C = ok(gen_tcp:connect("localhost", Port, [{active,N}])),
+ [{active,N}] = ok(inet:getopts(C, [active])),
+ S = ok(gen_tcp:accept(LS)),
+ ok = inet:setopts(S, [{active,N}]),
+ [{active,N}] = ok(inet:getopts(S, [active])),
+ repeat(3,
+ fun(I) ->
+ Msg = "message "++integer_to_list(I),
+ ok = gen_tcp:send(C, Msg),
+ receive
+ {tcp,S,Msg} ->
+ ok = gen_tcp:send(S, Msg)
+ after
+ 5000 ->
+ exit({error,timeout})
+ end,
+ receive
+ {tcp,C,Msg} ->
+ ok
+ after
+ 5000 ->
+ exit({error,timeout})
+ end
+ end),
+ receive
+ {tcp_passive,S} ->
+ [{active,false}] = ok(inet:getopts(S, [active]))
+ after
+ 5000 ->
+ exit({error,tcp_passive})
+ end,
+ receive
+ {tcp_passive,C} ->
+ [{active,false}] = ok(inet:getopts(C, [active]))
+ after
+ 5000 ->
+ exit({error,tcp_passive})
+ end,
+ LS2 = ok(gen_tcp:listen(0, [{active,0}])),
+ receive
+ {tcp_passive,LS2} ->
+ [{active,false}] = ok(inet:getopts(LS2, [active]))
+ after
+ 5000 ->
+ exit({error,tcp_passive})
+ end,
+ ok = gen_tcp:close(LS2),
+ ok = gen_tcp:close(C),
+ ok = gen_tcp:close(S),
+ ok = gen_tcp:close(LS),
+ ok.
+
-define(OTP_3924_MAX_DELAY, 100).
%% Taken out of the blue, but on intra host connections
%% I expect propagation of a close to be quite fast
@@ -2659,3 +2767,5 @@ oct_aloop(S,X,Times) ->
gen_tcp:close(S),
closed
end.
+
+ok({ok,V}) -> V.
diff --git a/lib/kernel/test/gen_udp_SUITE.erl b/lib/kernel/test/gen_udp_SUITE.erl
index 4cc6018614..6bb41999c5 100644
--- a/lib/kernel/test/gen_udp_SUITE.erl
+++ b/lib/kernel/test/gen_udp_SUITE.erl
@@ -33,7 +33,7 @@
init_per_group/2,end_per_group/2]).
-export([init_per_testcase/2, end_per_testcase/2]).
--export([send_to_closed/1,
+-export([send_to_closed/1, active_n/1,
buffer_size/1, binary_passive_recv/1, bad_address/1,
read_packets/1, open_fd/1, connect/1, implicit_inet6/1]).
@@ -42,7 +42,7 @@ suite() -> [{ct_hooks,[ts_install_cth]}].
all() ->
[send_to_closed, buffer_size, binary_passive_recv,
bad_address, read_packets, open_fd, connect,
- implicit_inet6].
+ implicit_inet6, active_n].
groups() ->
[].
@@ -465,6 +465,108 @@ open_fd(Config) when is_list(Config) ->
?t:fail(io_lib:format("~w", [flush()]))
end.
+active_n(Config) when is_list(Config) ->
+ N = 3,
+ S1 = ok(gen_udp:open(0, [{active,N}])),
+ [{active,N}] = ok(inet:getopts(S1, [active])),
+ ok = inet:setopts(S1, [{active,-N}]),
+ receive
+ {udp_passive, S1} -> ok
+ after
+ 5000 ->
+ exit({error,udp_passive_failure})
+ end,
+ [{active,false}] = ok(inet:getopts(S1, [active])),
+ ok = inet:setopts(S1, [{active,0}]),
+ receive
+ {udp_passive, S1} -> ok
+ after
+ 5000 ->
+ exit({error,udp_passive_failure})
+ end,
+ ok = inet:setopts(S1, [{active,32767}]),
+ {error,einval} = inet:setopts(S1, [{active,1}]),
+ {error,einval} = inet:setopts(S1, [{active,-32769}]),
+ ok = inet:setopts(S1, [{active,-32768}]),
+ receive
+ {udp_passive, S1} -> ok
+ after
+ 5000 ->
+ exit({error,udp_passive_failure})
+ end,
+ [{active,false}] = ok(inet:getopts(S1, [active])),
+ ok = inet:setopts(S1, [{active,N}]),
+ ok = inet:setopts(S1, [{active,true}]),
+ [{active,true}] = ok(inet:getopts(S1, [active])),
+ receive
+ _ -> exit({error,active_n})
+ after
+ 0 ->
+ ok
+ end,
+ ok = inet:setopts(S1, [{active,N}]),
+ ok = inet:setopts(S1, [{active,once}]),
+ [{active,once}] = ok(inet:getopts(S1, [active])),
+ receive
+ _ -> exit({error,active_n})
+ after
+ 0 ->
+ ok
+ end,
+ {error,einval} = inet:setopts(S1, [{active,32768}]),
+ ok = inet:setopts(S1, [{active,false}]),
+ [{active,false}] = ok(inet:getopts(S1, [active])),
+ S1Port = ok(inet:port(S1)),
+ S2 = ok(gen_udp:open(0, [{active,N}])),
+ S2Port = ok(inet:port(S2)),
+ [{active,N}] = ok(inet:getopts(S2, [active])),
+ ok = inet:setopts(S1, [{active,N}]),
+ [{active,N}] = ok(inet:getopts(S1, [active])),
+ lists:foreach(
+ fun(I) ->
+ Msg = "message "++integer_to_list(I),
+ ok = gen_udp:send(S2, "localhost", S1Port, Msg),
+ receive
+ {udp,S1,_,S2Port,Msg} ->
+ ok = gen_udp:send(S1, "localhost", S2Port, Msg)
+ after
+ 5000 ->
+ exit({error,timeout})
+ end,
+ receive
+ {udp,S2,_,S1Port,Msg} ->
+ ok
+ after
+ 5000 ->
+ exit({error,timeout})
+ end
+ end, lists:seq(1,N)),
+ receive
+ {udp_passive,S1} ->
+ [{active,false}] = ok(inet:getopts(S1, [active]))
+ after
+ 5000 ->
+ exit({error,udp_passive})
+ end,
+ receive
+ {udp_passive,S2} ->
+ [{active,false}] = ok(inet:getopts(S2, [active]))
+ after
+ 5000 ->
+ exit({error,udp_passive})
+ end,
+ S3 = ok(gen_udp:open(0, [{active,0}])),
+ receive
+ {udp_passive,S3} ->
+ [{active,false}] = ok(inet:getopts(S3, [active]))
+ after
+ 5000 ->
+ exit({error,udp_passive})
+ end,
+ ok = gen_udp:close(S3),
+ ok = gen_udp:close(S2),
+ ok = gen_udp:close(S1),
+ ok.
%
% Utils
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-08 00:55:12 +0000