aboutsummaryrefslogtreecommitdiffstats
path: root/HOWTO/INSTALL.md
diff options
context:
space:
mode:
Diffstat (limited to 'HOWTO/INSTALL.md')
-rw-r--r--HOWTO/INSTALL.md806
1 files changed, 806 insertions, 0 deletions
diff --git a/HOWTO/INSTALL.md b/HOWTO/INSTALL.md
new file mode 100644
index 0000000000..8051bc4393
--- /dev/null
+++ b/HOWTO/INSTALL.md
@@ -0,0 +1,806 @@
+Building and Installing Erlang/OTP
+==================================
+
+Introduction
+------------
+
+This document describes how to build and install Erlang/OTP-%OTP-REL%. You
+are advised to read the whole document before attempting to build and install
+Erlang/OTP. You can find more information about Open Source Erlang/OTP at:
+
+ <http://www.erlang.org/>
+
+The source code for Erlang/OTP can also be found in a Git repository:
+
+ <http://github.com/erlang/otp>
+
+Erlang/OTP should be possible to build from source on any Unix system,
+including Mac OS X. This document describes how to native compile Erlang/OTP
+on Unix. For detailed instructions on how to
+
+* cross compile Erlang/OTP, see the [$ERL_TOP/HOWTO/INSTALL-CROSS.md][]
+ document.
+
+* build Erlang/OTP on Windows, see the [$ERL_TOP/HOWTO/INSTALL-WIN32.md][]
+ document.
+
+ Binary releases for Windows can be found at
+ <http://www.erlang.org/download.html>.
+
+Before reading the above mentioned documents you are in any case advised to
+read this document first, since it covers building Erlang/OTP in general as
+well as other important information.
+
+Daily Build and Test
+--------------------
+At Ericsson we have a "Daily Build and Test" that runs on:
+
+* Solaris 8, 9
+ * Sparc32
+ * Sparc64
+* Solaris 10
+ * Sparc32
+ * Sparc64
+ * x86
+* SuSE Linux/GNU 9.4, 10.1
+ * x86
+* SuSE Linux/GNU 10.0, 10.1, 11.0
+ * x86
+ * x86\_64
+* openSuSE 11.4 (Celadon)
+ * x86\_64 (valgrind)
+* Fedora 7
+ * PowerPC
+* Fedora 14
+ * x86\_64
+* Gentoo Linux/GNU 1.12.11.1
+ * x86
+* Ubuntu Linux/GNU 7.04, 10.04, 10.10, 11.0
+ * x86\_64
+* MontaVista Linux/GNU 4.0.1
+ * PowerPC
+* FreeBSD 8.2
+ * x86
+* OpenBSD 5.0
+ * x86\_64
+* Mac OS X 10.5.8 (Leopard), 10.6.0 (Snow Leopard), 10.7.3 (Lion)
+ * x86
+* Windows XP SP3, 2003, Vista, 7
+ * x86
+* Windows 7
+ * x86\_64
+
+We also have the following "Daily Cross Builds":
+
+* SuSE Linux/GNU 10.1 x86 -> SuSE Linux/GNU 10.1 x86\_64
+* SuSE Linux/GNU 10.1 x86\_64 -> Linux/GNU TILEPro64
+
+and the following "Daily Cross Build Tests":
+
+* SuSE Linux/GNU 10.1 x86\_64
+
+Versions Known NOT to Work
+--------------------------
+
+* Suse linux 9.1 is shipped with a patched GCC version 3.3.3, having the
+ rpm named `gcc-3.3.3-41`. That version has a serious optimization bug
+ that makes it unusable for building the Erlang emulator. Please
+ upgrade GCC to a newer version before building on Suse 9.1. Suse Linux
+ Enterprise edition 9 (SLES9) has `gcc-3.3.3-43` and is not affected.
+
+* `gcc-4.3.0` has a serious optimizer bug. It produces an Erlang emulator
+ that will crash immediately. The bug is supposed to be fixed in
+ `gcc-4.3.1`.
+
+* FreeBSD had a bug which caused `kqueue`/`poll`/`select` to fail to detect
+ that a `writev()` on a pipe has been made. This bug should have been fixed
+ in FreeBSD 6.3 and FreeBSD 7.0. NetBSD and DragonFlyBSD probably have or
+ have had the same bug. More information can be found at:
+
+ * <http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/kern/sys_pipe.c>
+ * <http://lists.freebsd.org/pipermail/freebsd-arch/2007-September/006790.html>
+
+* `getcwd()` on Solaris 9 can cause an emulator crash. If you have
+ async-threads enabled you can increase the stack size of the
+ async-threads as a temporary workaround. See the `+a` command-line
+ argument in the documentation of `erl(1)`. Without async-threads the
+ emulator is not as vulnerable to this bug, but if you hit it without
+ async-threads the only workaround available is to enable async-threads
+ and increase the stack size of the async-threads. Sun has however
+ released patches that fixes the issue:
+
+ > Problem Description: 6448300 large mnttab can cause stack overrun
+ > during Solaris 9 getcwd
+
+ More information can be found at:
+
+ * <http://sunsolve.sun.com/search/document.do?assetkey=1-21-112874-40-1&searchclause=6448300>
+ * <http://sunsolve.sun.com/search/document.do?assetkey=1-21-114432-29-1&searchclause=6448300>
+
+Required Utilities
+------------------
+
+These are the tools you will need in order to unpack and build Erlang/OTP.
+
+### Unpacking ###
+
+* GNU unzip, or a modern uncompress.
+* A TAR program that understands the GNU TAR format for long filenames
+ (such as GNU TAR).
+
+### Building ###
+
+* GNU `make`
+* `gcc` -- GNU C compiler
+* Perl 5
+* GNU `m4` -- If HiPE (native code) support is enabled. HiPE can be
+ disabled using `--disable-hipe`
+* `ncurses`, `termcap`, or `termlib` -- The development headers and
+ libraries are needed, often known as `ncurses-devel`. Use
+ `--without-termcap` to build without any of these libraries. Note that
+ in this case only the old shell (without any line editing) can be used.
+* OpenSSL -- Optional, but needed for building the Erlang/OTP applications
+ `ssl` and `crypto`. You need the "development package" of OpenSSL, i.e.
+ including the header files. For building the application `ssl` the OpenSSL
+ binary command program `openssl` is also needed. At least version 0.9.8
+ of OpenSSL is required. Can be downloaded from <http://www.openssl.org>.
+* Sun Java jdk-1.5.0 or higher -- Optional but needed for building the
+ Erlang/OTP application `jinterface` and parts of `ic` and `orber`. Can
+ be downloaded from <http://java.sun.com>. We have also tested IBM's
+ JDK 1.5.0.
+* X Windows -- Optional, but development headers and libraries are needed
+ to build the Erlang/OTP application `gs` on Unix/Linux.
+* `sed` -- There seem to be some problems with some of the `sed` version on
+ Solaris. Make sure `/bin/sed` or `/usr/bin/sed` is used on the Solaris
+ platform.
+* `flex` -- Optional, headers and libraries are needed to build the `flex`
+ scanner for the `megaco` application on Unix/Linux.
+
+#### Building Documentation ####
+
+* `xsltproc` -- XSLT processor. A tool for applying XSLT stylesheets
+ to XML documents. Can be downloaded from
+ <http://xmlsoft.org/XSLT/xsltproc2.html>.
+* `fop` -- Apache FOP print formatter (requires Java). Can be downloaded
+ from <http://xmlgraphics.apache.org/fop>.
+
+#### Building in Git ####
+
+* GNU `autoconf` of at least version 2.59. Note that `autoconf` is not
+ needed when building an unmodified version of the released source.
+
+### Installing ###
+
+* An `install` program that can take multiple file names.
+
+How to Build and Install Erlang/OTP
+-----------------------------------
+
+The following instructions are for building [the released source tar ball][].
+
+The variable `$ERL_TOP` will be mentioned a lot of times. It refers to
+the top directory in the source tree. More information about `$ERL_TOP`
+can be found in the [make and $ERL_TOP][] section below. If you are
+building in git you probably want to take a look at the [Building in Git][]
+section below before proceeding.
+
+### Unpacking ###
+
+Step 1: Start by unpacking the Erlang/OTP distribution file with your GNU
+compatible TAR program.
+
+ $ gunzip -c otp_src_%OTP-REL%.tar.gz | tar xf -
+
+alternatively:
+
+ $ zcat otp_src_%OTP-REL%.tar.gz | tar xf -
+
+
+Step 2: Now cd into the base directory (`$ERL_TOP`).
+
+ $ cd otp_src_%OTP-REL%
+
+### Configuring ###
+
+Step 3: On some platforms Perl may behave strangely if certain locales are
+set, so optionally you may need to set the LANG variable:
+
+ # Bourne shell
+ $ LANG=C; export LANG
+
+or
+
+ # C-Shell
+ $ setenv LANG C
+
+Step 4: Run the following commands to configure the build:
+
+ $ ./configure [ options ]
+
+By default, Erlang/OTP will be installed in `/usr/local/{bin,lib/erlang}`.
+To instead install in `<BaseDir>/{bin,lib/erlang}`, use the
+`--prefix=<BaseDir>` option.
+
+If you upgraded the source with some patch you may need to clean up
+from previous builds before the new build. Before doing a `make clean`,
+be sure to read the [Pre-built Source Release][] section below.
+
+### Building ###
+
+Step 5: Build the Erlang/OTP package.
+
+ $ make
+
+### Installing ###
+
+Step 6: Install then Erlang/OTP package
+
+ $ make install
+
+### A Closer Look at the individual Steps ###
+
+Let us go through them in some detail.
+
+#### Configuring ####
+
+Step 4 runs a configuration script created by the GNU autoconf utility, which
+checks for system specific features and then creates a number of makefiles.
+
+The configure script allows you to customize a number of parameters;
+type `./configure --help` or `./configure --help=recursive` for details.
+`./configure --help=recursive` will give help for all `configure` scripts in
+all applications.
+
+One of the things you can specify is where Erlang/OTP should be installed. By
+default Erlang/OTP will be installed in `/usr/local/{bin,lib/erlang}`.
+To keep the same structure but install in a different place, `<Dir>` say,
+use the `--prefix` argument like this: `./configure --prefix=<Dir>`.
+
+Some of the available `configure` options are:
+
+* `--prefix=PATH` - Specify installation prefix.
+* `--{enable,disable}-threads` - Thread support (enabled by default if
+ possible)
+* `--{enable,disable}-smp-support` - SMP support (enabled by default if
+ possible)
+* `--{enable,disable}-kernel-poll` - Kernel poll support (enabled by
+ default if possible)
+* `--{enable,disable}-hipe` - HiPE support (enabled by default on supported
+ platforms)
+* `--enable-darwin-universal` - Build universal binaries on darwin i386.
+* `--enable-darwin-64bit` - Build 64-bit binaries on darwin
+* `--enable-m64-build` - Build 64-bit binaries using the `-m64` flag to
+ `(g)cc`
+* `--enable-m32-build` - Build 32-bit binaries using the `-m32` flag to
+ `(g)cc`
+* `--{with,without}-termcap` - termcap (without implies that only the old
+ Erlang shell can be used)
+* `--with-javac=JAVAC` - Specify Java compiler to use
+* `--{with,without}-javac` - Java compiler (without implies that the
+ `jinterface` application won't be built)
+* `--{enable,disable}-dynamic-ssl-lib` - Dynamic OpenSSL libraries
+* `--{enable,disable}-shared-zlib` - Shared zlib library
+* `--with-ssl=PATH` - Specify location of OpenSSL include and lib
+* `--{with,without}-ssl` - OpenSSL (without implies that the `crypto`,
+ `ssh`, and `ssl` won't be built)
+* `--with-libatomic_ops=PATH` - Use the `libatomic_ops` library for atomic
+ memory accesses. If `configure` should inform you about no native atomic
+ implementation available, you typically want to try using the
+ `libatomic_ops` library. It can be downloaded from
+ <http://www.hpl.hp.com/research/linux/atomic_ops/>.
+
+If you or your system has special requirements please read the `Makefile` for
+additional configuration information.
+
+#### Building ####
+
+Step 5 builds the Erlang/OTP system. On a fast computer, this will take about
+5 minutes. After completion of this step, you should have a working
+Erlang/OTP system which you can try by typing `bin/erl`. This should start
+up Erlang/OTP and give you a prompt:
+
+ $ bin/erl
+ Erlang %OTP-REL% (erts-%ERTS-VSN%) [source] [smp:4:4] [rq:4] [async-threads:0] [kernel-poll:false]
+
+ Eshell V%ERTS-VSN% (abort with ^G)
+ 1> _
+
+#### Installing ####
+
+Step 6 is optional. It installs Erlang/OTP at a standardized location (if you
+change your mind about where you wish to install you can rerun step 4,
+without having to do step 5 again).
+
+##### Alternative Installation Procedures #####
+
+* Staged install using [DESTDIR][]. You can perform the install
+ phase in a temporary directory and later move the installation into
+ its correct location by use of the `DESTDIR` variable:
+
+ $ make DESTDIR=<tmp install dir> install
+
+ The installation will be created in a location prefixed by `$DESTDIR`.
+ It can, however, not be run from there. It needs to be moved into the
+ correct location before it can be run. If `DESTDIR` have not been set
+ but `INSTALL_PREFIX` has been set, `DESTDIR` will be set to
+ `INSTALL_PREFIX`. Note that `INSTALL_PREFIX` in pre R13B04 was buggy
+ and behaved as `EXTRA_PREFIX` (see below). There are lots of areas of
+ use for an installation procedure using `DESTDIR`, e.g. when creating
+ a package, cross compiling, etc. Here is an example where the
+ installation should be located under `/opt/local`:
+
+ $ ./configure --prefix=/opt/local
+ $ make
+ $ make DESTDIR=/tmp/erlang-build install
+ $ cd /tmp/erlang-build/opt/local
+ $ # gnu-tar is used in this example
+ $ tar -zcf /home/me/my-erlang-build.tgz *
+ $ su -
+ Password: *****
+ $ cd /opt/local
+ $ tar -zxf /home/me/my-erlang-build.tgz
+
+* Install using the `release` target. Instead of doing `make install` you
+ can create the installation in whatever directory you like using the
+ `release` target and run the `Install` script yourself. `RELEASE_ROOT`
+ is used for specifying the directory where the installation should be
+ created. This is what by default ends up under `/usr/local/lib/erlang`
+ if you do the install using `make install`. All installation paths
+ provided in the `configure` phase are ignored, as well as `DESTDIR`,
+ and `INSTALL_PREFIX`. If you want links from a specific `bin` directory
+ to the installation you have to set those up yourself. An example where
+ Erlang/OTP should be located at `/home/me/OTP`:
+
+ $ ./configure
+ $ make
+ $ make RELEASE_ROOT=/home/me/OTP release
+ $ cd /home/me/OTP
+ $ ./Install -minimal /home/me/OTP
+ $ mkdir -p /home/me/bin
+ $ cd /home/me/bin
+ $ ln -s /home/me/OTP/bin/erl erl
+ $ ln -s /home/me/OTP/bin/erlc erlc
+ $ ln -s /home/me/OTP/bin/escript escript
+ ...
+
+ The `Install` script should currently be invoked as follows in the
+ directory where it resides (the top directory):
+
+ $ ./Install [-cross] [-minimal|-sasl] <ERL_ROOT>
+
+ where:
+
+ * `-minimal` Creates an installation that starts up a minimal amount
+ of applications, i.e., only `kernel` and `stdlib` are started. The
+ minimal system is normally enough, and is what `make install` uses.
+ * `-sasl` Creates an installation that also starts up the `sasl`
+ application.
+ * `-cross` For cross compilation. Informs the install script that it
+ is run on the build machine.
+ * `<ERL_ROOT>` - The absolute path to the Erlang installation to use
+ at run time. This is often the same as the current working directory,
+ but does not have to be. It can follow any other path through the
+ file system to the same directory.
+
+ If neither `-minimal`, nor `-sasl` is passed as argument you will be
+ prompted.
+
+* Test install using `EXTRA_PREFIX`. The content of the `EXTRA_PREFIX`
+ variable will prefix all installation paths when doing `make install`.
+ Note that `EXTRA_PREFIX` is similar to `DESTDIR`, but it does *not* have
+ the same effect as `DESTDIR`. The installation can and have to be run
+ from the location specified by `EXTRA_PREFIX`. That is, it can be useful
+ if you want to try the system out, running test suites, etc, before doing
+ the real install without `EXTRA_PREFIX`.
+
+### Symbolic Links in --bindir ###
+
+When doing `make install` and the default installation prefix is used,
+relative symbolic links will be created from `/usr/local/bin` to all public
+Erlang/OTP executables in `/usr/local/lib/erlang/bin`. The installation phase
+will try to create relative symbolic links as long as `--bindir` and the
+Erlang bin directory, located under `--libdir`, both have `--exec-prefix` as
+prefix. Where `--exec-prefix` defaults to `--prefix`. `--prefix`,
+`--exec-prefix`, `--bindir`, and `--libdir` are all arguments that can be
+passed to `configure`. One can force relative, or absolute links by passing
+`BINDIR_SYMLINKS=relative|absolute` as arguments to `make` during the install
+phase. Note that such a request might cause a failure if the request cannot
+be satisfied.
+
+### Pre-built Source Release ###
+
+The source release is delivered with a lot of platform independent
+build results already pre-built. If you want to remove these pre-built
+files, invoke `./otp_build remove_prebuilt_files` from the `$ERL_TOP`
+directory. After you have done this, you can build exactly the same way
+as before, but the build process will take a much longer time.
+
+> *WARNING*: Doing `make clean` in an arbitrary directory of the source
+> tree, may remove files needed for bootstrapping the build.
+>
+> Doing `./otp_build save_bootstrap` from the `$ERL_TOP` directory before
+> doing `make clean` will ensure that it will be possible to build after
+> doing `make clean`. `./otp_build save_bootstrap` will be invoked
+> automatically when `make` is invoked from `$ERL_TOP` with either the
+> `clean` target, or the default target. It is also automatically invoked
+> if `./otp_build remove_prebuilt_files` is invoked.
+
+### Building in Git ###
+
+When building in a Git working directory you also have to have a GNU `autoconf`
+of at least version 2.59 on your system, because you need to generate the
+`configure` scripts before you can start building.
+
+The `configure` scripts are generated by invoking `./otp_build autoconf` in
+the `$ERL_TOP` directory. The `configure` scripts also have to be regenerated
+when a `configure.in` or `aclocal.m4` file has been modified. Note that when
+checking out a branch a `configure.in` or `aclocal.m4` file may change
+content, and you may therefore have to regenerate the `configure` scripts
+when checking out a branch. Regenerated `configure` scripts imply that you
+have to run `configure` and build again.
+
+> *NOTE*: Running `./otp_build autoconf` is **not** needed when building
+> an unmodified version of the released source.
+
+Other useful information can be found at our github wiki:
+<http://wiki.github.com/erlang/otp>
+
+### make and $ERL\_TOP ###
+
+All the makefiles in the entire directory tree use the environment
+variable `ERL_TOP` to find the absolute path of the installation. The
+`configure` script will figure this out and set it in the top level
+Makefile (which, when building, it will pass on). However, when
+developing it is sometimes convenient to be able to run make in a
+subdirectory. To do this you must set the `ERL_TOP` variable
+before you run make.
+
+For example, assume your GNU make program is called `make` and you
+want to rebuild the application `STDLIB`, then you could do:
+
+ $ cd lib/stdlib; env ERL_TOP=<Dir> make
+
+where `<Dir>` would be what you find `ERL_TOP` is set to in the top level
+Makefile.
+
+The Erlang/OTP Documentation
+----------------------------
+
+### How to Build the Documentation ###
+
+ $ cd $ERL_TOP
+
+If you have just built Erlang/OTP in the current source tree, you have
+already ran `configure` and do not need to do this again; otherwise, run
+`configure`.
+
+ $ ./configure [Configure Args]
+
+When building the documentation you need a full Erlang/OTP-%OTP-REL% system in
+the `$PATH`.
+
+ $ export PATH=<Erlang/OTP-%OTP-REL% bin dir>:$PATH # Assuming bash/sh
+
+Build the documentation.
+
+ $ make docs
+
+The documentation can be installed either using the `install-docs` target,
+or using the `release_docs` target.
+
+* If you have installed Erlang/OTP using the `install` target, install
+ the documentation using the `install-docs` target. Install locations
+ determined by `configure` will be used. `$DESTDIR` can be used the
+ same way as when doing `make install`.
+
+ $ make install-docs
+
+* If you have installed Erlang/OTP using the `release` target, install
+ the documentation using the `release_docs` target. You typically want
+ to use the same `RELEASE_ROOT` as when invoking `make release`.
+
+ $ make release_docs RELEASE_ROOT=<release dir>
+
+#### Build Issues ####
+
+We have sometimes experienced problems with Sun's `java` running out of
+memory when running `fop`. Increasing the amount of memory available
+as follows has in our case solved the problem.
+
+ $ export FOP_OPTS="-Xmx<Installed amount of RAM in MB>m"
+
+More information can be found at
+<http://xmlgraphics.apache.org/fop/0.95/running.html#memory>.
+
+### How to Install the Pre-formatted Documentation ###
+
+Pre-formatted [html documentation][] and [man pages][] can be downloaded at
+<http://www.erlang.org/download.html>.
+
+For some graphical tools to find the on-line help you have to install
+the HTML documentation on top of the installed OTP applications, i.e.
+
+ $ cd <ReleaseDir>
+ $ gunzip -c otp_html_%OTP-REL%.tar.gz | tar xf -
+
+For `erl -man <page>` to work the Unix manual pages have to be
+installed in the same way, i.e.
+
+ $ cd <ReleaseDir>
+ $ gunzip -c otp_man_%OTP-REL%.tar.gz | tar xf -
+
+Where `<ReleaseDir>` is
+
+* `<PrefixDir>/lib/erlang` if you have installed Erlang/OTP using
+ `make install`.
+* `$DESTDIR<PrefixDir>/lib/erlang` if you have installed Erlang/OTP
+ using `make install DESTDIR=<TmpInstallDir>`.
+* `RELEASE_ROOT` if you have installed using
+ `make release RELEASE_ROOT=<ReleaseDir>`.
+
+Support for SMP (Symmetric Multi Processing)
+--------------------------------------------
+
+An emulator with SMP support will be built by default on most platforms
+if a usable POSIX thread library or native Windows threads is found.
+
+You can force building of an SMP emulator, by using
+`./configure --enable-smp-support`. However, if configure does not
+automatically enable SMP support, the build is very likely to fail.
+
+Use `./configure --disable-smp-support` if you for some reason do not
+want to have the emulator with SMP support built.
+
+If SMP support is enabled, support for threaded I/O will also be turned on
+(also in the emulator without SMP support).
+
+The `erl` command will automatically start the SMP emulator if the
+computer has more than one logical processor. You can force a start
+of the emulator with SMP support by passing `-smp enable` as
+command line arguments to erl, and you can force a start of the
+emulator without SMP support by passing `-smp disable`.
+
+GS (Graphic System)
+-------------------
+
+GS now Tcl/Tk 8.4. It will be searched for when starting GS.
+
+Using HiPE
+----------
+
+HiPE supports the following system configurations:
+
+* x86: All 32-bit and 64-bit mode processors should work.
+
+ * Linux: Fedora Core is supported. Both 32-bit and 64-bit modes are
+ supported.
+
+ NPTL glibc is strongly preferred, or a LinuxThreads
+ glibc configured for "floating stacks". Old non-floating
+ stacks glibcs have a fundamental problem that makes HiPE
+ support and threads support mutually exclusive.
+
+ * Solaris: Solaris 10 (32-bit and 64-bit) and 9 (32-bit) are supported.
+ The build requires a version of the GNU C compiler (gcc)
+ that has been configured to use the GNU assembler (gas).
+ Sun's x86 assembler is emphatically **not** supported.
+
+ * FreeBSD: FreeBSD 6.1 and 6.2 in 32-bit and 64-bit modes should work.
+
+ * MacOSX/Darwin: Darwin 9.8.0 in 32-bit mode should work.
+
+* PowerPC: All 32-bit 6xx/7xx(G3)/74xx(G4) processors should work. 32-bit
+ mode on 970 (G5) and POWER5 processors should work.
+
+ * Linux (Yellow Dog) and Mac OSX 10.4 are supported.
+
+* SPARC: All UltraSPARC processors running 32-bit user code should work.
+
+ * Solaris 9 is supported. The build requires a `gcc` that has been
+ configured to use Sun's assembler and linker. Using the GNU assembler
+ but Sun's linker has been known to cause problems.
+
+ * Linux (Aurora) is supported.
+
+* ARM: ARMv5TE (i.e. XScale) processors should work. Both big-endian and
+ little-endian modes are supported.
+
+ * Linux is supported.
+
+HiPE is automatically enabled on the following systems:
+
+* x86 in 32-bit mode: Linux, Solaris, FreeBSD
+* x86 in 64-bit mode: Linux, Solaris, FreeBSD
+* PowerPC: Linux, MacOSX
+* SPARC: Linux
+* ARM: Linux
+
+On other supported systems you need to `./configure --enable-hipe`.
+
+If you are running on a platform supporting HiPE and if you have not disabled
+HiPE, you can compile a module into native code like this from the Erlang
+shell:
+
+ 1> c(Module, native).
+
+or
+
+ 1> c(Module, [native|OtherOptions]).
+
+Using the erlc program, write like this:
+
+ $ erlc +native Module.erl
+
+The native code will be placed into the beam file and automatically loaded
+when the beam file is loaded.
+
+To add hipe options, write like this from the Erlang shell:
+
+ 1> c(Module, [native,{hipe,HipeOptions}|MoreOptions]).
+
+Use `hipe:help_options/0` to print out the available options.
+
+ 1> hipe:help_options().
+
+Mac OS X (Darwin)
+-----------------
+
+Make sure that the command `hostname` returns a valid fully qualified host
+name (this is configured in `/etc/hostconfig`).
+
+If you develop linked-in drivers (shared library) you need to link using
+`gcc` and the flags `-bundle -flat_namespace -undefined suppress`. You also
+include `-fno-common` in `CFLAGS` when compiling. Use `.so` as the library
+suffix.
+
+Use the `--enable-darwin-64bit` configure flag to build a 64-bit
+binaries on Mac OS X.
+
+Building a fast Erlang VM on Mac OS Lion
+----------------------------------------
+
+Starting with Xcode 4.2, Apple no longer includes a "real" `gcc`
+compiler (not based on the LLVM). Building with `llvm-gcc` or `clang`
+will work, but the performance of the Erlang run-time system will not
+be the best possible.
+
+Note that if you have `gcc-4.2` installed and included in `PATH`
+(from a previous version of Xcode), `configure` will automatically
+make sure that `gcc-4.2` will be used to compile `beam_emu.c`
+(the source file most in need of `gcc`).
+
+If you don't have `gcc-4.2.` and want to build a run-time system with
+the best possible performance, do like this:
+
+Install Xcode from the AppStore if it is not already installed.
+
+If you have Xcode 4.3, or later, you will also need to download
+"Command Line Tools" via the Downloads preference pane in Xcode.
+
+Some tools may still be lacking or out-of-date, we recommend using
+[Homebrew](https://github.com/mxcl/homebrew/wiki/installation) or
+Macports to update those tools.
+
+Install MacPorts (<http://www.macports.org/>). Then:
+
+ $ sudo port selfupdate
+ $ sudo port install gcc45 +universal
+
+### Building with wxErlang ###
+
+If you want to build the `wx` application, you will need to get wxWidgets-2.9.4 (or later)
+(`wxWidgets-2.9.4.tar.bz2` from <http://sourceforge.net/projects/wxwindows/files/2.9.4/>)
+or get it from github:
+ $ git clone [email protected]:wxWidgets/wxWidgets.git
+
+Be aware that the wxWidgets-2.9 branch is a development branch of wxWidgets and the MacOsX
+port still lags behind the other ports.
+
+Configure and build wxMac:
+
+ $ ./configure --with-cocoa --prefix=/usr/local
+ $ make
+ $ sudo make install
+ $ export PATH=/usr/local/bin:$PATH
+
+Check that you got the correct wx-config
+
+ $ which wx-config
+
+### Finish up ###
+
+Build Erlang with the MacPorts GCC as the main compiler (using `clang`
+for the Objective-C Cocoa code in the `wx` application):
+
+ $ export PATH=/usr/local/bin:$PATH
+ $ cd $ERL_TOP
+ $ CC=/opt/local/bin/gcc-mp-4.5 CXX=/opt/local/bin/g++-mp-4.5 ./configure --enable-darwin-64bit
+ $ make
+ $ sudo make install
+
+How to Build a Debug Enabled Erlang RunTime System
+--------------------------------------------------
+
+After completing all the normal building steps described above a debug
+enabled runtime system can be built. To do this you have to change
+directory to `$ERL_TOP/erts/emulator`.
+
+In this directory execute:
+
+ $ make debug FLAVOR=$FLAVOR
+
+where `$FLAVOR` is either `plain` or `smp`. The flavor options will
+produce a beam.debug and beam.smp.debug executable respectively. The
+files are installed along side with the normal (opt) versions `beam.smp`
+and `beam`.
+
+To start the debug enabled runtime system execute:
+
+ $ $ERL_TOP/bin/cerl -debug
+
+The debug enabled runtime system features lock violation checking,
+assert checking and various sanity checks to help a developer ensure
+correctness. Some of these features can be enabled on a normal beam
+using appropriate configure options.
+
+There are other types of runtime systems that can be built as well
+using the similar steps just described.
+
+ $ make $TYPE FLAVOR=$FLAVOR
+
+where `$TYPE` is `opt`, `gcov`, `gprof`, `debug`, `valgrind`, or `lcnt`.
+These different beam types are useful for debugging and profiling
+purposes.
+
+Authors
+-------
+
+Authors are mostly listed in the application's `AUTHORS` files,
+that is `$ERL_TOP/lib/*/AUTHORS` and `$ERL_TOP/erts/AUTHORS`,
+not in the individual source files.
+
+Copyright and License
+---------------------
+
+%CopyrightBegin%
+
+Copyright Ericsson AB 1998-2013. All Rights Reserved.
+
+The contents of this file are subject to the Erlang Public License,
+Version 1.1, (the "License"); you may not use this file except in
+compliance with the License. You should have received a copy of the
+Erlang Public License along with this software. If not, it can be
+retrieved online at http://www.erlang.org/.
+
+Software distributed under the License is distributed on an "AS IS"
+basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+the License for the specific language governing rights and limitations
+under the License.
+
+%CopyrightEnd%
+
+More Information
+----------------
+
+More information can be found at <http://www.erlang.org>.
+
+Modifying This Document
+-----------------------
+
+Before modifying this document you need to have a look at the
+[$ERL_TOP/HOWTO/MARKDOWN.md][] document.
+
+
+
+ [$ERL_TOP/HOWTO/INSTALL-CROSS.md]: INSTALL-CROSS.md
+ [$ERL_TOP/HOWTO/INSTALL-WIN32.md]: INSTALL-WIN32.md
+ [DESTDIR]: http://www.gnu.org/prep/standards/html_node/DESTDIR.html
+ [Building in Git]: #How-to-Build-and-Install-ErlangOTP_Building-in-Git
+ [Pre-built Source Release]: #How-to-Build-and-Install-ErlangOTP_Prebuilt-Source-Release
+ [make and $ERL_TOP]: #How-to-Build-and-Install-ErlangOTP_make-and-ERLTOP
+ [html documentation]: http://www.erlang.org/download/otp_doc_html_%OTP-REL%.tar.gz
+ [man pages]: http://www.erlang.org/download/otp_doc_man_%OTP-REL%.tar.gz
+ [the released source tar ball]: http://www.erlang.org/download/otp_src_%OTP-REL%.tar.gz
+ [$ERL_TOP/HOWTO/MARKDOWN.md]: MARKDOWN.md
+
+ [?TOC]: true