diff options
Diffstat (limited to 'HOWTO')
-rw-r--r-- | HOWTO/INSTALL-ANDROID.md | 52 | ||||
-rw-r--r-- | HOWTO/INSTALL-CROSS.md | 18 | ||||
-rw-r--r-- | HOWTO/INSTALL-WIN32.md | 10 | ||||
-rw-r--r-- | HOWTO/INSTALL.md | 922 |
4 files changed, 559 insertions, 443 deletions
diff --git a/HOWTO/INSTALL-ANDROID.md b/HOWTO/INSTALL-ANDROID.md new file mode 100644 index 0000000000..31698d4ce3 --- /dev/null +++ b/HOWTO/INSTALL-ANDROID.md @@ -0,0 +1,52 @@ +Cross Compiling Erlang/OTP - ANDROID +==================================== + +Introduction +------------ + +This document describes how to cross compile Erlang OTP to Android/Rasberry Pi platforms. + +### Download and Install Android NDK ### + +https://developer.android.com/tools/sdk/ndk/index.html + +### Define System Variables ### + +export NDK_ROOT=/usr/local/android +export NDK_PLAT=android-9 +export PATH=$NDK_ROOT/toolchains/arm-linux-androideabi-4.8/prebuilt/darwin-x86_64/bin:$PATH + +### Configure OTP ### + +./otp_build configure \ + --xcomp-conf=./xcomp/erl-xcomp-arm-android.conf \ + --without-ssl + +### Compile OTP ### + +make noboot [-j4] + +### Make Release ### + +./otp_build release -a /usr/local/otp_R16B03_arm + +### Target Deployment ### + +Make a tarball out of /usr/local/otp_R16B03_arm and copy it to target device +(e.g. Raspberry Pi). Extract it and install + +./Install /usr/local/otp_R16B03_arm + +Android SDK (adb tool) is used to deploy OTP/Erlang to target device for +evaluation purpose only. + +adb push /usr/local/otp_R16B03_arm /mnt/sdcard/otp_R16B03_arm +adb shell + +### Known Issues ### + + * native inet:gethostbyname/1 return {error, nxdomain} on Raspberry PI. Use dns resolver to by-pass the issue (see http://www.erlang.org/doc/apps/erts/inet_cfg.html) + +### References ### + + The port derives some solutions from https://code.google.com/p/erlang4android/ diff --git a/HOWTO/INSTALL-CROSS.md b/HOWTO/INSTALL-CROSS.md index cb9d12e753..7f852860c9 100644 --- a/HOWTO/INSTALL-CROSS.md +++ b/HOWTO/INSTALL-CROSS.md @@ -537,7 +537,11 @@ When a variable has been set, no warning will be issued. * `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file -* `erl_xcomp_ose_LM_CONF` - OSE load module default configuration file +* `erl_xcomp_ose_BEAM_LM_CONF` - Beam OSE load module configuration file + +* `erl_xcomp_ose_EPMD_LM_CONF` - EPMD OSE load module configuration file + +* `erl_xcomp_ose_RUN_ERL_LM_CONF` - run_erl_lm OSE load module configuration file Copyright and License --------------------- @@ -559,19 +563,11 @@ under the License. %CopyrightEnd% -Modifying This Document ------------------------ - -Before modifying this document you need to have a look at the -[$ERL_TOP/HOWTO/MARKDOWN.md][] document. - [$ERL_TOP/HOWTO/INSTALL.md]: INSTALL.md - [Building in Git]: INSTALL.md#How-to-Build-and-Install-ErlangOTP_Building-in-Git - [How to Build the Documentation]: INSTALL.md#The-ErlangOTP-Documentation_How-to-Build-the-Documentation + [Building in Git]: INSTALL.md#How-to-Build-and-Install-ErlangOTP + [How to Build the Documentation]: INSTALL.md#How-to-Build-and-Install-ErlangOTP_How-to-Build-the-Documentation [cross configuration variables]: #Currently-Used-Configuration-Variables [DESTDIR]: http://www.gnu.org/prep/standards/html_node/DESTDIR.html - [$ERL_TOP/HOWTO/MARKDOWN.md]: MARKDOWN.md - [?TOC]: true diff --git a/HOWTO/INSTALL-WIN32.md b/HOWTO/INSTALL-WIN32.md index 94d3688f23..0387572dd3 100644 --- a/HOWTO/INSTALL-WIN32.md +++ b/HOWTO/INSTALL-WIN32.md @@ -1018,7 +1018,7 @@ Copyright and License %CopyrightBegin% -Copyright Ericsson AB 2003-2012. All Rights Reserved. +Copyright Ericsson AB 2003-2014. All Rights Reserved. The contents of this file are subject to the Erlang Public License, Version 1.1, (the "License"); you may not use this file except in @@ -1033,15 +1033,7 @@ under the License. %CopyrightEnd% -Modifying This Document ------------------------ - -Before modifying this document you need to have a look at the -[$ERL_TOP/HOWTO/MARKDOWN.md][] document. - - [1]: http://www.erlang.org/faq.html "mailing lists" - [$ERL_TOP/HOWTO/MARKDOWN.md]: MARKDOWN.md [?TOC]: true diff --git a/HOWTO/INSTALL.md b/HOWTO/INSTALL.md index bbde5bc08c..53b1b8cd8a 100644 --- a/HOWTO/INSTALL.md +++ b/HOWTO/INSTALL.md @@ -4,174 +4,109 @@ Building and Installing Erlang/OTP Introduction ------------ -This document describes how to build and install Erlang/OTP-%OTP-REL%. You -are advised to read the whole document before attempting to build and install -Erlang/OTP. You can find more information about Open Source Erlang/OTP at: +This document describes how to build and install Erlang/OTP-%OTP-REL%. +Erlang/OTP should be possible to build from source on any Unix/Linux system, +including OS X. You are advised to read the whole document +before attempting to build and install Erlang/OTP. - <http://www.erlang.org/> +The source code can be downloaded from the official site of Erlang/OTP or GitHub. +* <http://www.erlang.org> +* <https://github.com/erlang/otp> -The source code for Erlang/OTP can also be found in a Git repository: - - <http://github.com/erlang/otp> - -Erlang/OTP should be possible to build from source on any Unix system, -including Mac OS X. This document describes how to native compile Erlang/OTP -on Unix. For detailed instructions on how to - -* cross compile Erlang/OTP, see the [$ERL_TOP/HOWTO/INSTALL-CROSS.md][] - document. - -* build Erlang/OTP on Windows, see the [$ERL_TOP/HOWTO/INSTALL-WIN32.md][] - document. +Required Utilities +------------------ - Binary releases for Windows can be found at - <http://www.erlang.org/download.html>. +These are the tools you need in order to unpack and build Erlang/OTP. -Before reading the above mentioned documents you are in any case advised to -read this document first, since it covers building Erlang/OTP in general as -well as other important information. +> *WARNING*: Please have a look at the [Known platform issues][] chapter +> before you start. -Daily Build and Test --------------------- -At Ericsson we have a "Daily Build and Test" that runs on: - -* Solaris 8, 9 - * Sparc32 - * Sparc64 -* Solaris 10 - * Sparc32 - * Sparc64 - * x86 -* SuSE Linux/GNU 9.4, 10.1 - * x86 -* SuSE Linux/GNU 10.0, 10.1, 11.0 - * x86 - * x86\_64 -* openSuSE 11.4 (Celadon) - * x86\_64 (valgrind) -* Fedora 7 - * PowerPC -* Fedora 14 - * x86\_64 -* Gentoo Linux/GNU 1.12.11.1 - * x86 -* Ubuntu Linux/GNU 7.04, 10.04, 10.10, 11.0 - * x86\_64 -* MontaVista Linux/GNU 4.0.1 - * PowerPC -* FreeBSD 8.2 - * x86 -* OpenBSD 5.0 - * x86\_64 -* Mac OS X 10.5.8 (Leopard), 10.7.3 (Lion), 10.9 (Mavericks) - * x86 -* Windows XP SP3, 2003, Vista, 7 - * x86 -* Windows 7 - * x86\_64 +### Unpacking ### -We also have the following "Daily Cross Builds": +* GNU unzip, or a modern uncompress. +* A TAR program that understands the GNU TAR format for long filenames. -* SuSE Linux/GNU 10.1 x86 -> SuSE Linux/GNU 10.1 x86\_64 -* SuSE Linux/GNU 10.1 x86\_64 -> Linux/GNU TILEPro64 +### Building ### -and the following "Daily Cross Build Tests": +* GNU `make` +* Compiler -- GNU C Compiler, `gcc` or the C compiler frontend for LLVM, `clang`. +* Perl 5 +* GNU `m4` -- If HiPE (native code) support is enabled. HiPE can be + disabled using `--disable-hipe` +* `ncurses`, `termcap`, or `termlib` -- The development headers and + libraries are needed, often known as `ncurses-devel`. Use + `--without-termcap` to build without any of these libraries. Note that + in this case only the old shell (without any line editing) can be used. +* `sed` -- Stream Editor for basic text transformation. -* SuSE Linux/GNU 10.1 x86\_64 +#### Building in Git #### -Versions Known NOT to Work --------------------------- +* GNU `autoconf` of at least version 2.59. Note that `autoconf` is not + needed when building an unmodified version of the released source. -* Suse linux 9.1 is shipped with a patched GCC version 3.3.3, having the - rpm named `gcc-3.3.3-41`. That version has a serious optimization bug - that makes it unusable for building the Erlang emulator. Please - upgrade GCC to a newer version before building on Suse 9.1. Suse Linux - Enterprise edition 9 (SLES9) has `gcc-3.3.3-43` and is not affected. +#### Building on OS X #### -* `gcc-4.3.0` has a serious optimizer bug. It produces an Erlang emulator - that will crash immediately. The bug is supposed to be fixed in - `gcc-4.3.1`. +* Xcode -- Download and install via the Mac App Store. + Read about [Building on a Mac][] before proceeding. -* FreeBSD had a bug which caused `kqueue`/`poll`/`select` to fail to detect - that a `writev()` on a pipe has been made. This bug should have been fixed - in FreeBSD 6.3 and FreeBSD 7.0. NetBSD and DragonFlyBSD probably have or - have had the same bug. More information can be found at: +### Installing ### - * <http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/kern/sys_pipe.c> - * <http://lists.freebsd.org/pipermail/freebsd-arch/2007-September/006790.html> +* An `install` program that can take multiple file names. -* `getcwd()` on Solaris 9 can cause an emulator crash. If you have - async-threads enabled you can increase the stack size of the - async-threads as a temporary workaround. See the `+a` command-line - argument in the documentation of `erl(1)`. Without async-threads the - emulator is not as vulnerable to this bug, but if you hit it without - async-threads the only workaround available is to enable async-threads - and increase the stack size of the async-threads. Sun has however - released patches that fixes the issue: - > Problem Description: 6448300 large mnttab can cause stack overrun - > during Solaris 9 getcwd +Optional Utilities +------------------ - More information can be found at: +Some applications are automatically skipped if the dependencies aren't met. +Here is a list of utilities needed for those applications. You will +also find the utilities needed for building the documentation. - * <http://sunsolve.sun.com/search/document.do?assetkey=1-21-112874-40-1&searchclause=6448300> - * <http://sunsolve.sun.com/search/document.do?assetkey=1-21-114432-29-1&searchclause=6448300> +### Building ### -Required Utilities ------------------- +* OpenSSL -- The opensource toolkit for Secure Socket Layer + and Transport Layer Security. + Required for building the application `crypto`. + Further, `ssl` and `ssh` require a working crypto application and + will also be skipped if OpenSSL is missing. The `public_key` + application will available without `crypto`, but the functionality + will be very limited. + + The development package of OpenSSL including the header files are needed as well + as the binary command program `openssl`. At least version 0.9.8 of OpenSSL is required. + Read more and download from <http://www.openssl.org>. +* Oracle Java SE JDK -- The Java Development Kit (Standard Edition). + Required for building the application `jinterface` and parts of `ic` and `orber`. + At least version 1.5.0 of the JDK is required. + + Download from <http://www.oracle.com/technetwork/java/javase/downloads>. + We have also tested with IBM's JDK 1.5.0. +* X Windows -- Development headers and libraries are needed + to build the Erlang/OTP application `gs` on Unix/Linux. +* `flex` -- Headers and libraries are needed to build the flex + scanner for the `megaco` application on Unix/Linux. +* wxWidgets -- Toolkit for GUI applications. + Required for building the `wx` application. At least + version 3.0 of wxWidgets is required. -These are the tools you will need in order to unpack and build Erlang/OTP. + Download from <http://sourceforge.net/projects/wxwindows/files/3.0.0/> + or get it from GitHub: <https://github.com/wxWidgets/wxWidgets> -### Unpacking ### + Further instructions on wxWidgets, read [Building with wxErlang][]. -* GNU unzip, or a modern uncompress. -* A TAR program that understands the GNU TAR format for long filenames - (such as GNU TAR). -### Building ### -* GNU `make` -* `gcc` -- GNU C compiler -* Perl 5 -* GNU `m4` -- If HiPE (native code) support is enabled. HiPE can be - disabled using `--disable-hipe` -* `ncurses`, `termcap`, or `termlib` -- The development headers and - libraries are needed, often known as `ncurses-devel`. Use - `--without-termcap` to build without any of these libraries. Note that - in this case only the old shell (without any line editing) can be used. -* OpenSSL -- Optional, but needed for building the Erlang/OTP applications - `ssl` and `crypto`. You need the "development package" of OpenSSL, i.e. - including the header files. For building the application `ssl` the OpenSSL - binary command program `openssl` is also needed. At least version 0.9.8 - of OpenSSL is required. Can be downloaded from <http://www.openssl.org>. -* Sun Java jdk-1.5.0 or higher -- Optional but needed for building the - Erlang/OTP application `jinterface` and parts of `ic` and `orber`. Can - be downloaded from <http://java.sun.com>. We have also tested IBM's - JDK 1.5.0. -* X Windows -- Optional, but development headers and libraries are needed - to build the Erlang/OTP application `gs` on Unix/Linux. -* `sed` -- There seem to be some problems with some of the `sed` version on - Solaris. Make sure `/bin/sed` or `/usr/bin/sed` is used on the Solaris - platform. -* `flex` -- Optional, headers and libraries are needed to build the `flex` - scanner for the `megaco` application on Unix/Linux. +### Building Documentation ### -#### Building Documentation #### +* `xsltproc` -- A command line XSLT processor. -* `xsltproc` -- XSLT processor. A tool for applying XSLT stylesheets - to XML documents. Can be downloaded from + A tool for applying XSLT stylesheets + to XML documents. Download xsltproc from <http://xmlsoft.org/XSLT/xsltproc2.html>. + * `fop` -- Apache FOP print formatter (requires Java). Can be downloaded from <http://xmlgraphics.apache.org/fop>. -#### Building in Git #### -* GNU `autoconf` of at least version 2.59. Note that `autoconf` is not - needed when building an unmodified version of the released source. - -### Installing ### - -* An `install` program that can take multiple file names. How to Build and Install Erlang/OTP ----------------------------------- @@ -186,65 +121,205 @@ section below before proceeding. ### Unpacking ### -Step 1: Start by unpacking the Erlang/OTP distribution file with your GNU +Start by unpacking the Erlang/OTP distribution file with your GNU compatible TAR program. - $ gunzip -c otp_src_%OTP-VSN%.tar.gz | tar xf - + $ tar -zxf otp_src_%OTP-VSN%.tar.gz # Assuming bash/sh -alternatively: - - $ zcat otp_src_%OTP-VSN%.tar.gz | tar xf - - - -Step 2: Now cd into the base directory (`$ERL_TOP`). +Now change directory into the base directory and set the `$ERL_TOP` variable. $ cd otp_src_%OTP-VSN% + $ export ERL_TOP=`pwd` # Assuming bash/sh ### Configuring ### -Step 3: On some platforms Perl may behave strangely if certain locales are -set, so optionally you may need to set the LANG variable: - - # Bourne shell - $ LANG=C; export LANG +Run the following commands to configure the build: -or + $ ./configure [ options ] - # C-Shell - $ setenv LANG C +> *NOTE*: If you are building Erlang/OTP from git you will need to run `./otp_build autoconf` to generate +> the configure scripts. -Step 4: Run the following commands to configure the build: +By default, Erlang/OTP release will be installed in `/usr/local/{bin,lib/erlang}`. +If you for instance don't have the permission to install in the standard location, + you can install Erlang/OTP somewhere else. For example, to install in +`/opt/erlang/%OTP-VSN%/{bin,lib/erlang}`, use the `--prefix=/opt/erlang/%OTP-VSN%` option. - $ ./configure [ options ] +On some platforms Perl may behave strangely if certain locales are +set. If you get errors when building, try setting the LANG variable: -If you are building it from git you will need to run `autoconf` to generate configure file. -By default, Erlang/OTP will be installed in `/usr/local/{bin,lib/erlang}`. -To instead install in `<BaseDir>/{bin,lib/erlang}`, use the -`--prefix=<BaseDir>` option. + $ export LANG=C # Assuming bash/sh -If you upgraded the source with some patch you may need to clean up -from previous builds before the new build. Before doing a `make clean`, -be sure to read the [Pre-built Source Release][] section below. ### Building ### -Step 5: Build the Erlang/OTP package. +Build the Erlang/OTP release. $ make + +### Testing ### + +Before installation you should test whether your build is working properly +by running our smoke test. The smoke test is a subset of the complete Erlang/OTP test suites. +First you will need to build and release the test suites. + + $ make release_tests + +This creates an additional folder in `$ERL_TOP/release` called `tests`. +Now, it's time to start the smoke test. + + $ cd release/tests/test_server + $ $ERL_TOP/bin/erl -s ts install -s ts smoke_test batch -s init stop + +To verify that everything is ok you should open `$ERL_TOP/release/tests/test_server/index.html` +in your web browser and make sure that there are zero failed test cases. + +> *NOTE*: On builds without `crypto`, `ssl` and `ssh` there is a failed test case +> for undefined functions. Verify that the failed test case log only shows calls +> to skipped applications. + ### Installing ### -Step 6: Install then Erlang/OTP package +You are now ready to install the Erlang/OTP release! +The following command will install the release on your system. $ make install -### A Closer Look at the individual Steps ### -Let us go through them in some detail. +### Running ### + +You should now have a working release of Erlang/OTP! +Jump to [System Principles][] for instructions on running Erlang/OTP. + + +### How to Build the Documentation ### + +Make sure you're in the top directory in the source tree. + + $ cd $ERL_TOP + +If you have just built Erlang/OTP in the current source tree, you have +already ran `configure` and do not need to do this again; otherwise, run +`configure`. + + $ ./configure [Configure Args] + +When building the documentation you need a full Erlang/OTP-%OTP-VSN% system in +the `$PATH`. + + $ export PATH=$ERL_TOP/bin:$PATH # Assuming bash/sh + +Build the documentation. -#### Configuring #### + $ make docs + +#### Build Issues #### + +We have sometimes experienced problems with Oracle's `java` running out of +memory when running `fop`. Increasing the amount of memory available +as follows has in our case solved the problem. + + $ export FOP_OPTS="-Xmx<Installed amount of RAM in MB>m" + +More information can be found at +* <http://xmlgraphics.apache.org/fop/0.95/running.html#memory>. + + +### How to Install the Documentation ### + +The documentation can be installed either using the `install-docs` target, +or using the `release_docs` target. + +* If you have installed Erlang/OTP using the `install` target, install + the documentation using the `install-docs` target. Install locations + determined by `configure` will be used. `$DESTDIR` can be used the + same way as when doing `make install`. + + $ make install-docs + +* If you have installed Erlang/OTP using the `release` target, install + the documentation using the `release_docs` target. You typically want + to use the same `RELEASE_ROOT` as when invoking `make release`. + + $ make release_docs RELEASE_ROOT=<release dir> + + +### Accessing the Documentation ### + +After installation you can access the documentation by + +* Reading man pages. Make sure that `erl` is referring to the + installed version. For example `/usr/local/bin/erl`. + Try viewing at the man page for Mnesia + + $ erl -man mnesia + +* Browsing the html pages by loading the page `/usr/local/lib/erlang/doc/erlang/index.html` + or `<BaseDir>/lib/erlang/doc/erlang/index.html` if the prefix option has been used. + + +### How to Install the Pre-formatted Documentation ### + +Pre-formatted [html documentation][] and [man pages][] can be downloaded from +* <http://www.erlang.org/download.html>. + +Extract the html archive in the installation directory. + + $ cd <ReleaseDir> + $ tar -zxf otp_html_%OTP-VSN%.tar.gz + +For `erl -man <page>` to work the Unix manual pages have to be +installed in the same way, i.e. + + $ cd <ReleaseDir> + $ tar -zxf otp_man_%OTP-VSN%.tar.gz + +Where `<ReleaseDir>` is + +* `<PrefixDir>/lib/erlang` if you have installed Erlang/OTP using + `make install`. +* `$DESTDIR<PrefixDir>/lib/erlang` if you have installed Erlang/OTP + using `make install DESTDIR=<TmpInstallDir>`. +* `RELEASE_ROOT` if you have installed using + `make release RELEASE_ROOT=<ReleaseDir>`. + + +Advanced configuration and build of Erlang/OTP +---------------------------------------------- + +If you want to tailor your Erlang/OTP build and installation, please read +on for detailed information about the individual steps. + +### make and $ERL\_TOP ### + +All the makefiles in the entire directory tree use the environment +variable `ERL_TOP` to find the absolute path of the installation. The +`configure` script will figure this out and set it in the top level +Makefile (which, when building, it will pass on). However, when +developing it is sometimes convenient to be able to run make in a +subdirectory. To do this you must set the `ERL_TOP` variable +before you run make. -Step 4 runs a configuration script created by the GNU autoconf utility, which +For example, assume your GNU make program is called `make` and you +want to rebuild the application `STDLIB`, then you could do: + + $ cd lib/stdlib; env ERL_TOP=<Dir> make + +where `<Dir>` would be what you find `ERL_TOP` is set to in the top level +Makefile. + +### otp\_build vs configure/make ### + +Building Erlang/OTP can be done either by using the `$ERL_TOP/otp_build` +script, or by invoking `$ERL_TOP/configure` and `make` directly. Building using +`otp_build` is easier since it involves fewer steps, but the `otp_build` build +procedure is not as flexible as the `configure`/`make` build procedure. The binary +releases for Windows that we deliver are built using `otp_build`. + +### Configuring ### + +The configure script is created by the GNU autoconf utility, which checks for system specific features and then creates a number of makefiles. The configure script allows you to customize a number of parameters; @@ -260,10 +335,10 @@ use the `--prefix` argument like this: `./configure --prefix=<Dir>`. Some of the available `configure` options are: * `--prefix=PATH` - Specify installation prefix. -* `--{enable,disable}-threads` - Thread support (enabled by default if - possible) + +* `--{enable,disable}-threads` - Thread support. This is enabled by default if possible. * `--{enable,disable}-smp-support` - SMP support (enabled by default if - possible) + a usable POSIX thread library or native Windows threads is found) * `--{enable,disable}-kernel-poll` - Kernel poll support (enabled by default if possible) * `--{enable,disable}-hipe` - HiPE support (enabled by default on supported @@ -290,7 +365,7 @@ Some of the available `configure` options are: * `--{with,without}-javac` - Java compiler (without implies that the `jinterface` application won't be built) * `--{enable,disable}-dynamic-ssl-lib` - Dynamic OpenSSL libraries -* `--{enable,disable}-shared-zlib` - Shared zlib library +* `--{enable,disable}-builtin-zlib` - Use the built-in source for zlib. * `--with-ssl=PATH` - Specify location of OpenSSL include and lib * `--{with,without}-ssl` - OpenSSL (without implies that the `crypto`, `ssh`, and `ssl` won't be built) @@ -310,7 +385,7 @@ Some of the available `configure` options are: * `--enable-static-{nifs,drivers}` - To allow usage of nifs and drivers on OSs that do not support dynamic linking of libraries it is possible to statically link nifs and drivers with the main Erlang VM binary. This is done by passing - a comma seperated list to the archives that you want to statically link. e.g. + a comma separated list to the archives that you want to statically link. e.g. `--enable-static-nifs=/home/$USER/my_nif.a`. The path has to be absolute and the name of the archive has to be the same as the module, i.e. `my_nif` in the example above. This is also true for drivers, but then it is the driver name @@ -321,9 +396,9 @@ Some of the available `configure` options are: to configure. * `--without-$app` - By default all applications in Erlang/OTP will be included in a release. If this is not wanted it is possible to specify that Erlang/OTP - should be compiled without that applications, i.e. `--without-wx`. There is - no automatic dependency handling inbetween applications. So if you disable - an application that another depends on, you also have to disable the + should be compiled without one or more applications, i.e. `--without-wx`. There is + no automatic dependency handling between applications. If you disable + an application that another application depends on, you also have to disable the dependant application. * `--enable-dirty-schedulers` - Enable the **experimental** dirty schedulers functionality. Note that the dirty schedulers functionality is experimental, @@ -334,26 +409,162 @@ Some of the available `configure` options are: If you or your system has special requirements please read the `Makefile` for additional configuration information. -#### Building #### +#### Atomic Memory Operations and the VM #### + +The VM with SMP support makes quite a heavy use of atomic memory operations. +An implementation providing native atomic memory operations is therefore very +important when building Erlang/OTP. By default the VM will refuse to build +if native atomic memory operations are not available. + +Erlang/OTP itself provides implementations of native atomic memory operations +that can be used when compiling with a `gcc` compatible compiler on 32-bit +and 64-bit x86, 32-bit and 64-bit SPARC V9, and 32-bit PowerPC. When compiling +with a `gcc` compatible compiler on other architectures, the VM may be able to +make use of native atomic operations using the `__sync_*` primitives, but this +should only be used as a last resort since this wont give you optimal +performance. When compiling on Windows using a MicroSoft Visual C++ compiler +native atomic memory operations are provided by Windows APIs. + +You are recommended to use the native atomic implementation provided by +Erlang/OTP, or the API provided by Windows. If these do not provide native +atomics on your platform, you are recommended to build and install +[libatomic_ops][] before building Erlang/OTP. The `libatomic_ops` library +provides native atomic memory operations for a variety of platforms and +compilers. When building Erlang/OTP you need to inform the build system of +where the `libatomic_ops` library is installed using the +`--with-libatomic_ops=PATH` configure switch. + +### Building ### + +Building Erlang/OTP on a relatively fast computer takes approximately +5 minutes. To speed it up, you can utilize parallel make with the `-j<num_jobs>` option. + + $ export MAKEFLAGS=-j8 # Assuming bash/sh + $ make + +If you've upgraded the source with a patch you may need to clean up from previous +builds before the new build. +Make sure to read the [Pre-built Source Release][] section below before doing a `make clean`. + +#### Within Git #### + +When building in a Git working directory you also have to have a GNU `autoconf` +of at least version 2.59 on your system, because you need to generate the +`configure` scripts before you can start building. + +The `configure` scripts are generated by invoking `./otp_build autoconf` in +the `$ERL_TOP` directory. The `configure` scripts also have to be regenerated +when a `configure.in` or `aclocal.m4` file has been modified. Note that when +checking out a branch a `configure.in` or `aclocal.m4` file may change +content, and you may therefore have to regenerate the `configure` scripts +when checking out a branch. Regenerated `configure` scripts imply that you +have to run `configure` and build again. + +> *NOTE*: Running `./otp_build autoconf` is **not** needed when building +> an unmodified version of the released source. + +Other useful information can be found at our GitHub wiki: +* <http://wiki.github.com/erlang/otp> + +#### OS X (Darwin) #### + +Make sure that the command `hostname` returns a valid fully qualified host +name (this is configured in `/etc/hostconfig`). Otherwise you might experience +problems when running distributed systems. + +If you develop linked-in drivers (shared library) you need to link using +`gcc` and the flags `-bundle -flat_namespace -undefined suppress`. You also +include `-fno-common` in `CFLAGS` when compiling. Use `.so` as the library +suffix. + +If you have Xcode 4.3, or later, you will also need to download +"Command Line Tools" via the Downloads preference pane in Xcode. + +#### Building with wxErlang #### + +If you want to build the `wx` application, you will need to get wxWidgets-3.0 +(`wxWidgets-3.0.0.tar.bz2` from <http://sourceforge.net/projects/wxwindows/files/3.0.0/>) or get it from github with bug fixes: + + $ git clone --branch WX_3_0_branch [email protected]:wxWidgets/wxWidgets.git + +Be aware that the wxWidgets-3.0 is a new release of wxWidgets, it is not as +mature as the old releases and the OS X port still lags behind the other ports. -Step 5 builds the Erlang/OTP system. On a fast computer, this will take about -5 minutes. After completion of this step, you should have a working -Erlang/OTP system which you can try by typing `bin/erl`. This should start -up Erlang/OTP and give you a prompt: +Configure and build wxWidgets (on Mavericks - 10.9): - $ bin/erl - Erlang/OTP %OTP-REL% [erts-%ERTS-VSN%] [source] [smp:4:4] [async-threads:0] [kernel-poll:false] + $ ./configure --with-cocoa --prefix=/usr/local + or without support for old versions and with static libs + $ ./configure --with-cocoa --prefix=/usr/local --with-macosx-version-min=10.9 --disable-shared + $ make + $ sudo make install + $ export PATH=/usr/local/bin:$PATH - Eshell V%ERTS-VSN% (abort with ^G) - 1> _ +Check that you got the correct wx-config -#### Installing #### + $ which wx-config && wx-config --version-full -Step 6 is optional. It installs Erlang/OTP at a standardized location (if you -change your mind about where you wish to install you can rerun step 4, -without having to do step 5 again). +Build Erlang/OTP + + $ export PATH=/usr/local/bin:$PATH + $ cd $ERL_TOP + $ ./configure + $ make + $ sudo make install -##### Alternative Installation Procedures ##### + +#### Pre-built Source Release #### + +The source release is delivered with a lot of platform independent +build results already pre-built. If you want to remove these pre-built +files, invoke `./otp_build remove_prebuilt_files` from the `$ERL_TOP` +directory. After you have done this, you can build exactly the same way +as before, but the build process will take a much longer time. + +> *WARNING*: Doing `make clean` in an arbitrary directory of the source +> tree, may remove files needed for bootstrapping the build. +> +> Doing `./otp_build save_bootstrap` from the `$ERL_TOP` directory before +> doing `make clean` will ensure that it will be possible to build after +> doing `make clean`. `./otp_build save_bootstrap` will be invoked +> automatically when `make` is invoked from `$ERL_TOP` with either the +> `clean` target, or the default target. It is also automatically invoked +> if `./otp_build remove_prebuilt_files` is invoked. + +#### How to Build a Debug Enabled Erlang RunTime System #### + +After completing all the normal building steps described above a debug +enabled runtime system can be built. To do this you have to change +directory to `$ERL_TOP/erts/emulator`. + +In this directory execute: + + $ make debug FLAVOR=$FLAVOR + +where `$FLAVOR` is either `plain` or `smp`. The flavor options will +produce a beam.debug and beam.smp.debug executable respectively. The +files are installed along side with the normal (opt) versions `beam.smp` +and `beam`. + +To start the debug enabled runtime system execute: + + $ $ERL_TOP/bin/cerl -debug + +The debug enabled runtime system features lock violation checking, +assert checking and various sanity checks to help a developer ensure +correctness. Some of these features can be enabled on a normal beam +using appropriate configure options. + +There are other types of runtime systems that can be built as well +using the similar steps just described. + + $ make $TYPE FLAVOR=$FLAVOR + +where `$TYPE` is `opt`, `gcov`, `gprof`, `debug`, `valgrind`, or `lcnt`. +These different beam types are useful for debugging and profiling +purposes. + + +### Installing ### * Staged install using [DESTDIR][]. You can perform the install phase in a temporary directory and later move the installation into @@ -435,7 +646,7 @@ without having to do step 5 again). if you want to try the system out, running test suites, etc, before doing the real install without `EXTRA_PREFIX`. -### Symbolic Links in --bindir ### +#### Symbolic Links in --bindir #### When doing `make install` and the default installation prefix is used, relative symbolic links will be created from `/usr/local/bin` to all public @@ -449,156 +660,10 @@ passed to `configure`. One can force relative, or absolute links by passing phase. Note that such a request might cause a failure if the request cannot be satisfied. -### Pre-built Source Release ### - -The source release is delivered with a lot of platform independent -build results already pre-built. If you want to remove these pre-built -files, invoke `./otp_build remove_prebuilt_files` from the `$ERL_TOP` -directory. After you have done this, you can build exactly the same way -as before, but the build process will take a much longer time. - -> *WARNING*: Doing `make clean` in an arbitrary directory of the source -> tree, may remove files needed for bootstrapping the build. -> -> Doing `./otp_build save_bootstrap` from the `$ERL_TOP` directory before -> doing `make clean` will ensure that it will be possible to build after -> doing `make clean`. `./otp_build save_bootstrap` will be invoked -> automatically when `make` is invoked from `$ERL_TOP` with either the -> `clean` target, or the default target. It is also automatically invoked -> if `./otp_build remove_prebuilt_files` is invoked. - -### Building in Git ### - -When building in a Git working directory you also have to have a GNU `autoconf` -of at least version 2.59 on your system, because you need to generate the -`configure` scripts before you can start building. - -The `configure` scripts are generated by invoking `./otp_build autoconf` in -the `$ERL_TOP` directory. The `configure` scripts also have to be regenerated -when a `configure.in` or `aclocal.m4` file has been modified. Note that when -checking out a branch a `configure.in` or `aclocal.m4` file may change -content, and you may therefore have to regenerate the `configure` scripts -when checking out a branch. Regenerated `configure` scripts imply that you -have to run `configure` and build again. - -> *NOTE*: Running `./otp_build autoconf` is **not** needed when building -> an unmodified version of the released source. - -Other useful information can be found at our github wiki: -<http://wiki.github.com/erlang/otp> - -### make and $ERL\_TOP ### - -All the makefiles in the entire directory tree use the environment -variable `ERL_TOP` to find the absolute path of the installation. The -`configure` script will figure this out and set it in the top level -Makefile (which, when building, it will pass on). However, when -developing it is sometimes convenient to be able to run make in a -subdirectory. To do this you must set the `ERL_TOP` variable -before you run make. - -For example, assume your GNU make program is called `make` and you -want to rebuild the application `STDLIB`, then you could do: - - $ cd lib/stdlib; env ERL_TOP=<Dir> make - -where `<Dir>` would be what you find `ERL_TOP` is set to in the top level -Makefile. - -The Erlang/OTP Documentation ----------------------------- - -### How to Build the Documentation ### - -Before you can build the documentation you need to either [native build][] -or [cross build][] the Erlang/OTP system. After this you can build the -documentation as follows. - - $ cd $ERL_TOP - $ make docs - -The documentation can be installed either using the `install-docs` target, -or using the `release_docs` target. - -* If you have installed Erlang/OTP using the `install` target, install - the documentation using the `install-docs` target. Install locations - determined by `configure` will be used. `$DESTDIR` can be used the - same way as when doing `make install`. - - $ make install-docs - -* If you have installed Erlang/OTP using the `release` target, install - the documentation using the `release_docs` target. You typically want - to use the same `RELEASE_ROOT` as when invoking `make release`. - - $ make release_docs RELEASE_ROOT=<release dir> -#### Build Issues #### +### Running ### -We have sometimes experienced problems with Sun's `java` running out of -memory when running `fop`. Increasing the amount of memory available -as follows has in our case solved the problem. - - $ export FOP_OPTS="-Xmx<Installed amount of RAM in MB>m" - -More information can be found at -<http://xmlgraphics.apache.org/fop/0.95/running.html#memory>. - -### How to Install the Pre-formatted Documentation ### - -Pre-formatted [html documentation][] and [man pages][] can be downloaded at -<http://www.erlang.org/download.html>. - -For some graphical tools to find the on-line help you have to install -the HTML documentation on top of the installed OTP applications, i.e. - - $ cd <ReleaseDir> - $ gunzip -c otp_html_%OTP-VSN%.tar.gz | tar xf - - -For `erl -man <page>` to work the Unix manual pages have to be -installed in the same way, i.e. - - $ cd <ReleaseDir> - $ gunzip -c otp_man_%OTP-VSN%.tar.gz | tar xf - - -Where `<ReleaseDir>` is - -* `<PrefixDir>/lib/erlang` if you have installed Erlang/OTP using - `make install`. -* `$DESTDIR<PrefixDir>/lib/erlang` if you have installed Erlang/OTP - using `make install DESTDIR=<TmpInstallDir>`. -* `RELEASE_ROOT` if you have installed using - `make release RELEASE_ROOT=<ReleaseDir>`. - -Support for SMP (Symmetric Multi Processing) --------------------------------------------- - -An emulator with SMP support will be built by default on most platforms -if a usable POSIX thread library or native Windows threads is found. - -You can force building of an SMP emulator, by using -`./configure --enable-smp-support`. However, if configure does not -automatically enable SMP support, the build is very likely to fail. - -Use `./configure --disable-smp-support` if you for some reason do not -want to have the emulator with SMP support built. - -If SMP support is enabled, support for threaded I/O will also be turned on -(also in the emulator without SMP support). - -The `erl` command will automatically start the SMP emulator if the -computer has more than one logical processor. You can force a start -of the emulator with SMP support by passing `-smp enable` as -command line arguments to erl, and you can force a start of the -emulator without SMP support by passing `-smp disable`. - -GS (Graphic System) -------------------- - -GS now Tcl/Tk 8.4. It will be searched for when starting GS. - -Using HiPE ----------- +#### Using HiPE #### HiPE supports the following system configurations: @@ -619,12 +684,12 @@ HiPE supports the following system configurations: * FreeBSD: FreeBSD 6.1 and 6.2 in 32-bit and 64-bit modes should work. - * MacOSX/Darwin: Darwin 9.8.0 in 32-bit mode should work. + * OS X/Darwin: Darwin 9.8.0 in 32-bit mode should work. * PowerPC: All 32-bit 6xx/7xx(G3)/74xx(G4) processors should work. 32-bit mode on 970 (G5) and POWER5 processors should work. - * Linux (Yellow Dog) and Mac OSX 10.4 are supported. + * Linux (Yellow Dog) and OS X 10.4 are supported. * SPARC: All UltraSPARC processors running 32-bit user code should work. @@ -643,11 +708,11 @@ HiPE is automatically enabled on the following systems: * x86 in 32-bit mode: Linux, Solaris, FreeBSD * x86 in 64-bit mode: Linux, Solaris, FreeBSD -* PowerPC: Linux, MacOSX +* PowerPC: Linux, Mac OSX * SPARC: Linux * ARM: Linux -On other supported systems you need to `./configure --enable-hipe`. +On other supported systems, see [Advanced Configure][] on how to enable HiPE. If you are running on a platform supporting HiPE and if you have not disabled HiPE, you can compile a module into native code like this from the Erlang @@ -659,7 +724,7 @@ or 1> c(Module, [native|OtherOptions]). -Using the erlc program, write like this: +Using the erlc program, write like this $ erlc +native Module.erl @@ -674,88 +739,102 @@ Use `hipe:help_options/0` to print out the available options. 1> hipe:help_options(). -Mac OS X (Darwin) ------------------ - -Make sure that the command `hostname` returns a valid fully qualified host -name (this is configured in `/etc/hostconfig`). - -If you develop linked-in drivers (shared library) you need to link using -`gcc` and the flags `-bundle -flat_namespace -undefined suppress`. You also -include `-fno-common` in `CFLAGS` when compiling. Use `.so` as the library -suffix. - -Install `Xcode` from the `AppStore` if it is not already installed. - -If you have Xcode 4.3, or later, you will also need to download -"Command Line Tools" via the Downloads preference pane in Xcode. - -### Building with wxErlang ### +#### Running with GS #### -If you want to build the `wx` application, you will need to get wxWidgets-3.0 (or later) -(`wxWidgets-3.0.0.tar.bz2` from <http://sourceforge.net/projects/wxwindows/files/3.0.0/>) -or get it from github: - $ git clone [email protected]:wxWidgets/wxWidgets.git +The `gs` application requires the GUI toolkit Tcl/Tk to run. At least +version 8.4 is required. -Be aware that the wxWidgets-3.0 is a new release of wxWidgets, it is not as matured -as the old releases and the MacOsX port still lags behind the other ports. - -Configure and build wxWidgets (on Mavericks - 10.9): - - $ ./configure --with-cocoa --prefix=/usr/local - or without support for old versions and with static libs - $ ./configure --with-cocoa --prefix=/usr/local --with-macosx-version-min=10.9 --disable-shared - $ make - $ sudo make install - $ export PATH=/usr/local/bin:$PATH +Known platform issues +--------------------- -Check that you got the correct wx-config +* Suse linux 9.1 is shipped with a patched GCC version 3.3.3, having the + rpm named `gcc-3.3.3-41`. That version has a serious optimization bug + that makes it unusable for building the Erlang emulator. Please + upgrade GCC to a newer version before building on Suse 9.1. Suse Linux + Enterprise edition 9 (SLES9) has `gcc-3.3.3-43` and is not affected. - $ which wx-config +* `gcc-4.3.0` has a serious optimizer bug. It produces an Erlang emulator + that will crash immediately. The bug is supposed to be fixed in + `gcc-4.3.1`. -### Finish up ### +* FreeBSD had a bug which caused `kqueue`/`poll`/`select` to fail to detect + that a `writev()` on a pipe has been made. This bug should have been fixed + in FreeBSD 6.3 and FreeBSD 7.0. NetBSD and DragonFlyBSD probably have or + have had the same bug. More information can be found at: -Build Erlang + * <http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/kern/sys_pipe.c> + * <http://lists.freebsd.org/pipermail/freebsd-arch/2007-September/006790.html> - $ export PATH=/usr/local/bin:$PATH - $ cd $ERL_TOP - $ ./configure --enable-shared-zlib - $ make - $ sudo make install +* `getcwd()` on Solaris 9 can cause an emulator crash. If you have + async-threads enabled you can increase the stack size of the + async-threads as a temporary workaround. See the `+a` command-line + argument in the documentation of `erl(1)`. Without async-threads the + emulator is not as vulnerable to this bug, but if you hit it without + async-threads the only workaround available is to enable async-threads + and increase the stack size of the async-threads. Oracle has however + released patches that fixes the issue: -How to Build a Debug Enabled Erlang RunTime System --------------------------------------------------- + > Problem Description: 6448300 large mnttab can cause stack overrun + > during Solaris 9 getcwd -After completing all the normal building steps described above a debug -enabled runtime system can be built. To do this you have to change -directory to `$ERL_TOP/erts/emulator`. + More information can be found at: + * <https://getupdates.oracle.com/readme/112874-40> + * <https://getupdates.oracle.com/readme/114432-29> -In this directory execute: +* `sed` on Solaris seem to have some problems. For example on + Solaris 8, the BSD `sed` and XPG4 `sed` should be avoided. + Make sure `/bin/sed` or `/usr/bin/sed` is used on the Solaris + platform. - $ make debug FLAVOR=$FLAVOR -where `$FLAVOR` is either `plain` or `smp`. The flavor options will -produce a beam.debug and beam.smp.debug executable respectively. The -files are installed along side with the normal (opt) versions `beam.smp` -and `beam`. +Daily Build and Test +-------------------- +At Ericsson we have a "Daily Build and Test" that runs on: -To start the debug enabled runtime system execute: +* Solaris 8, 9 + * Sparc32 + * Sparc64 +* Solaris 10 + * Sparc32 + * Sparc64 + * x86 +* SuSE Linux/GNU 9.4, 10.1 + * x86 +* SuSE Linux/GNU 10.0, 10.1, 11.0 + * x86 + * x86\_64 +* openSuSE 11.4 (Celadon) + * x86\_64 (valgrind) +* Fedora 7 + * PowerPC +* Fedora 16 + * x86\_64 +* Gentoo Linux/GNU 1.12.11.1 + * x86 +* Ubuntu Linux/GNU 7.04, 10.04, 10.10, 11.04, 12.04 + * x86\_64 +* MontaVista Linux/GNU 4.0.1 + * PowerPC +* FreeBSD 10.0 + * x86 +* OpenBSD 5.4 + * x86\_64 +* OS X 10.5.8 (Leopard), 10.7.5 (Lion), 10.9.1 (Mavericks) + * x86 +* Windows XP SP3, 2003, Vista, 7 + * x86 +* Windows 7 + * x86\_64 - $ $ERL_TOP/bin/cerl -debug +We also have the following "Daily Cross Builds": -The debug enabled runtime system features lock violation checking, -assert checking and various sanity checks to help a developer ensure -correctness. Some of these features can be enabled on a normal beam -using appropriate configure options. +* SuSE Linux/GNU 10.1 x86 -> SuSE Linux/GNU 10.1 x86\_64 +* SuSE Linux/GNU 10.1 x86\_64 -> Linux/GNU TILEPro64 -There are other types of runtime systems that can be built as well -using the similar steps just described. +and the following "Daily Cross Build Tests": - $ make $TYPE FLAVOR=$FLAVOR +* SuSE Linux/GNU 10.1 x86\_64 -where `$TYPE` is `opt`, `gcov`, `gprof`, `debug`, `valgrind`, or `lcnt`. -These different beam types are useful for debugging and profiling -purposes. Authors ------- @@ -764,6 +843,7 @@ Authors are mostly listed in the application's `AUTHORS` files, that is `$ERL_TOP/lib/*/AUTHORS` and `$ERL_TOP/erts/AUTHORS`, not in the individual source files. + Copyright and License --------------------- @@ -784,30 +864,26 @@ under the License. %CopyrightEnd% -More Information ----------------- - -More information can be found at <http://www.erlang.org>. -Modifying This Document ------------------------ - -Before modifying this document you need to have a look at the -[$ERL_TOP/HOWTO/MARKDOWN.md][] document. [$ERL_TOP/HOWTO/INSTALL-CROSS.md]: INSTALL-CROSS.md [$ERL_TOP/HOWTO/INSTALL-WIN32.md]: INSTALL-WIN32.md [DESTDIR]: http://www.gnu.org/prep/standards/html_node/DESTDIR.html - [Building in Git]: #How-to-Build-and-Install-ErlangOTP_Building-in-Git - [Pre-built Source Release]: #How-to-Build-and-Install-ErlangOTP_Prebuilt-Source-Release - [make and $ERL_TOP]: #How-to-Build-and-Install-ErlangOTP_make-and-ERLTOP + [Building in Git]: #Advanced-configuration-and-build-of-ErlangOTP_Building_Within-Git + [Advanced Configure]: #Advanced-configuration-and-build-of-ErlangOTP_Configuring + [Pre-built Source Release]: #Advanced-configuration-and-build-of-ErlangOTP_Building_Prebuilt-Source-Release + [make and $ERL_TOP]: #Advanced-configuration-and-build-of-ErlangOTP_make-and-ERLTOP [html documentation]: http://www.erlang.org/download/otp_doc_html_%OTP-VSN%.tar.gz [man pages]: http://www.erlang.org/download/otp_doc_man_%OTP-VSN%.tar.gz [the released source tar ball]: http://www.erlang.org/download/otp_src_%OTP-VSN%.tar.gz + [System Principles]: ../system_principles/system_principles + [Known platform issues]: #Known-platform-issues [native build]: #How-to-Build-and-Install-ErlangOTP [cross build]: INSTALL-CROSS.md - [$ERL_TOP/HOWTO/MARKDOWN.md]: MARKDOWN.md - - [?TOC]: true + [Required Utilities]: #Required-Utilities + [Optional Utilities]: #Optional-Utilities + [Building on a Mac]: #Advanced-configuration-and-build-of-ErlangOTP_Building_OS-X-Darwin + [Building with wxErlang]: #Advanced-configuration-and-build-of-ErlangOTP_Building_Building-with-wxErlang + [libatomic_ops]: https://github.com/ivmai/libatomic_ops/ |