diff options
Diffstat (limited to 'INSTALL.md')
| -rw-r--r-- | INSTALL.md | 292 |
1 files changed, 160 insertions, 132 deletions
diff --git a/INSTALL.md b/INSTALL.md index 452b0ff252..2567b791e5 100644 --- a/INSTALL.md +++ b/INSTALL.md @@ -1,8 +1,12 @@ Building and Installing Erlang/OTP ================================== -Please read the whole file before attempting to build and install Erlang/OTP. -You can find more information about Open Source Erlang/OTP at: +Introduction +------------ + +This document describes how to build and install Erlang/OTP-%OTP-REL%. You +are advised to read the whole document before attempting to build and install +Erlang/OTP. You can find more information about Open Source Erlang/OTP at: <http://www.erlang.org/> @@ -10,24 +14,22 @@ The source code for Erlang/OTP can also be found in a Git repository: <http://github.com/erlang/otp> -Portability ------------ - Erlang/OTP should be possible to build from source on any Unix system, including Mac OS X. This document describes how to native compile Erlang/OTP on Unix. For detailed instructions on how to -* cross compile Erlang/OTP, see the [`$ERL_TOP/INSTALL-CROSS.md`] [1] +* cross compile Erlang/OTP, see the [$ERL_TOP/INSTALL-CROSS.md][] document. -* build Erlang/OTP on Windows, see the [`$ERL_TOP/INSTALL-WIN32.md`] [2] +* build Erlang/OTP on Windows, see the [$ERL_TOP/INSTALL-WIN32.md][] document. Binary releases for Windows can be found at <http://www.erlang.org/download.html>. -However, you are in any case advised to read this document first, since it -covers building Erlang/OTP in general as well as other important information. +Before reading the above mensioned documents you are in any case advised to +read this document first, since it covers building Erlang/OTP in general as +well as other important information. Daily Build and Test -------------------- @@ -44,9 +46,9 @@ At Ericsson we have a "Daily Build and Test" that runs on: * x86 * SuSE Linux/GNU 10.0, 10.1 * x86 - * x86_64 + * x86\_64 * SuSE Linux/GNU 11.0 - * x86_64 + * x86\_64 * Gentoo Linux/GNU 1.12.11.1 * x86 * MontaVista Linux/GNU 4.0.1 @@ -60,15 +62,15 @@ At Ericsson we have a "Daily Build and Test" that runs on: We also have the following "Daily Cross Builds": -* SuSE Linux/GNU 10.1 x86 -> SuSE Linux/GNU 10.1 x86_64 -* SuSE Linux/GNU 10.1 x86_64 -> Linux/GNU TILEPro64 +* SuSE Linux/GNU 10.1 x86 -> SuSE Linux/GNU 10.1 x86\_64 +* SuSE Linux/GNU 10.1 x86\_64 -> Linux/GNU TILEPro64 and the following "Daily Cross Build Tests": -* SuSE Linux/GNU 10.1 x86_64 +* SuSE Linux/GNU 10.1 x86\_64 -Versions Known *not* to Work ----------------------------- +Versions Known NOT to Work +-------------------------- * Suse linux 9.1 is shipped with a patched GCC version 3.3.3, having the rpm named `gcc-3.3.3-41`. That version has a serious optimization bug @@ -118,14 +120,15 @@ These are the tools you will need in order to unpack and build Erlang/OTP. ### Building ### -* GNU make -* GNU C compiler +* GNU `make` +* `gcc` -- GNU C compiler * Perl 5 -* GNU m4 -- If hipe (native code) support is enabled. -* ncurses (or termcap or termlib) -- The development headers and libraries - are needed, often known as ncurses-devel. (Use --without-termcap to build - without any of these libraries. Only the old shell (without any line - editing) can be used.) +* GNU `m4` -- If HiPE (native code) support is enabled. HiPE can be + disabled using `--disable-hipe` +* `ncurses`, `termcap`, or `termlib` -- The development headers and + libraries are needed, often known as `ncurses-devel`. Use + `--without-termcap` to build without any of these libraries. Note that + in this case only the old shell (without any line editing) can be used. * OpenSSL -- Optional, but needed for building the Erlang/OTP applications `ssl` and `crypto`. You need the "development package" of OpenSSL, i.e. including the header files. For building the application `ssl` the OpenSSL @@ -140,23 +143,21 @@ These are the tools you will need in order to unpack and build Erlang/OTP. * `sed` -- There seem to be some problems with some of the `sed` version on Solaris. Make sure `/bin/sed` or `/usr/bin/sed` is used on the Solaris platform. -* Flex -- Optional, headers and libraries are needed to build the flex +* `flex` -- Optional, headers and libraries are needed to build the `flex` scanner for the `megaco` application on Unix/Linux. -If you are building in a Git working directory you also have to have a GNU -`autoconf` of at least version 2.59. Autoconf is however not needed if you -build an unmodified version of the released source. - #### Building Documentation #### * `xsltproc` -- XSLT processor. A tool for applying XSLT stylesheets to XML documents. Can be downloaded from <http://xmlsoft.org/XSLT/xsltproc2.html>. -* `fop` -- Apache FOP print formatter (requires Java). Can be downloaded from - <http://xmlgraphics.apache.org/fop>. -* `Markdown.pl` -- Optional. This is a `perl` script that generates an - HTML version of a document written in Markdown notation. Can be - downloaded at <http://daringfireball.net/projects/markdown>. +* `fop` -- Apache FOP print formatter (requires Java). Can be downloaded + from <http://xmlgraphics.apache.org/fop>. + +#### Building in Git #### + +* GNU `autoconf` of at least version 2.59. Note that `autoconf` is not + needed when building an unmodified version of the released source. ### Installing ### @@ -165,12 +166,12 @@ build an unmodified version of the released source. How to Build and Install Erlang/OTP ----------------------------------- -The following instructions are for building using the source tar ball. +The following instructions are for building [the released source tar ball][]. The variable `$ERL_TOP` will be mentioned a lot of times. It refers to the top directory in the source tree. More information about `$ERL_TOP` -can be found in the "`make` and `$ERL_TOP`" section below. If you are -building in git you probably want to take a look at the "Building in Git" +can be found in the [make and $ERL_TOP][] section below. If you are +building in git you probably want to take a look at the [Building in Git][] section below before proceeding. ### Unpacking ### @@ -178,13 +179,16 @@ section below before proceeding. Step 1: Start by unpacking the Erlang/OTP distribution file with your GNU compatible TAR program. - $ gunzip -c otp_src_R13B04.tar.gz | tar xf - - $ zcat otp_src_R13B04.tar.gz | tar xf - + $ gunzip -c otp_src_%OTP-REL%.tar.gz | tar xf - + +alternatively: + + $ zcat otp_src_%OTP-REL%.tar.gz | tar xf - Step 2: Now cd into the base directory (`$ERL_TOP`). - $ cd otp_src_R13B04 + $ cd otp_src_%OTP-REL% ### Configuring ### @@ -208,8 +212,8 @@ To instead install in `<BaseDir>/{bin,lib/erlang}`, use the `--prefix=<BaseDir>` option. If you upgraded the source with some patch you may need to clean up -from previous builds before the new build. Do a `make clean`; see -"Caveats" below. +from previous builds before the new build. Before doing a `make clean`, +be sure to read the [Pre-built Source Release][] section below. ### Building ### @@ -237,46 +241,64 @@ type `./configure --help` or `./configure --help=recursive` for details. `./configure --help=recursive` will give help for all `configure` scripts in all applications. -One of the things you can specify is where Erlang/OTP should be installed: by -default Erlang/OTP will be installed in `/usr/local/{bin,lib/erlang}`; -to keep the same structure but install in a different place, `<Dir>` say, +One of the things you can specify is where Erlang/OTP should be installed. By +default Erlang/OTP will be installed in `/usr/local/{bin,lib/erlang}`. +To keep the same structure but install in a different place, `<Dir>` say, use the `--prefix` argument like this: `./configure --prefix=<Dir>`. Some of the available `configure` options are: - * `--prefix=PATH`: Specify installation prefix. - * `--{enable,disable}-threads`: Thread support (enabled by default if +* `--prefix=PATH` - Specify installation prefix. +* `--{enable,disable}-threads` - Thread support (enabled by default if possible) - * `--{enable,disable}-smp-support`: SMP support (enabled by default if +* `--{enable,disable}-smp-support` - SMP support (enabled by default if possible) - * `--{enable,disable}-kernel-poll`: Kernel poll support (enabled by default - if possible) - * `--{enable,disable}-hipe`: HiPE support (enabled by default on supported +* `--{enable,disable}-kernel-poll` - Kernel poll support (enabled by + default if possible) +* `--{enable,disable}-hipe` - HiPE support (enabled by default on supported platforms) - * `--enable-darwin-universal`: Build universal binaries on darwin i386. - * `--enable-darwin-64bit`: Build 64bit binaries on darwin - * `--enable-m64-build`: Build 64bit binaries using the -m64 flag to (g)cc - * `--enable-m32-build`: Build 32bit binaries using the -m32 flag to (g)cc - * `--{with,without}-termcap`: termcap (without implies that only the old +* `--enable-darwin-universal` - Build universal binaries on darwin i386. +* `--enable-darwin-64bit` - Build 64-bit binaries on darwin +* `--enable-m64-build` - Build 64-bit binaries using the `-m64` flag to + `(g)cc` +* `--enable-m32-build` - Build 32-bit binaries using the `-m32` flag to + `(g)cc` +* `--{with,without}-termcap` - termcap (without implies that only the old Erlang shell can be used) - * `--with-javac=JAVAC`: Specify Java compiler to use - * `--{with,without}-javac`: Java compiler (without implies that the - `jinterface` application won't be built). - * `--{enable,disable}-dynamic-ssl-lib`: Dynamic OpenSSL libraries - * `--{enable,disable}-shared-zlib`: Shared zlib library - * `--with-ssl=PATH`: Specify location of OpenSSL include and lib - * `--{with,without}-ssl`: OpenSSL (without implies that the `crypto`, `ssh`, - and `ssl` won't be built) - -If you or your system has special requirements please read the -Makefile for additional configuration information. +* `--with-javac=JAVAC` - Specify Java compiler to use +* `--{with,without}-javac` - Java compiler (without implies that the + `jinterface` application won't be built) +* `--{enable,disable}-dynamic-ssl-lib` - Dynamic OpenSSL libraries +* `--{enable,disable}-shared-zlib` - Shared zlib library +* `--with-ssl=PATH` - Specify location of OpenSSL include and lib +* `--{with,without}-ssl` - OpenSSL (without implies that the `crypto`, + `ssh`, and `ssl` won't be built) +* `--enable-ethread-pre-pentium4-compatibility` - Enable compatibility with + x86 processors before pentium 4 (back to 486) in the ethread library. If + not passed the ethread library (part of the runtime system) will use + instructions that first appeared on the pentium 4 processor when building + for x86. +* `--with-libatomic_ops=PATH` - Use the `libatomic_ops` library for atomic + memory accesses. If `configure` should inform you about no native atomic + implementation available, you typically want to try using the + `libatomic_ops` library. It can be downloaded from + <http://www.hpl.hp.com/research/linux/atomic_ops/>. + +If you or your system has special requirements please read the `Makefile` for +additional configuration information. #### Building #### Step 5 builds the Erlang/OTP system. On a fast computer, this will take about 5 minutes. After completion of this step, you should have a working Erlang/OTP system which you can try by typing `bin/erl`. This should start -up Erlang/OTP and give you a prompt. +up Erlang/OTP and give you a prompt: + + $ bin/erl + Erlang %OTP-REL% (erts-%ERTS-VSN%) [source] [smp:4:4] [rq:4] [async-threads:0] [kernel-poll:false] + + Eshell V%ERTS-VSN% (abort with ^G) + 1> _ #### Installing #### @@ -286,7 +308,7 @@ without having to do step 5 again). ##### Alternative Installation Procedures ##### -* Staged install using [`DESTDIR`] [3]. You can perform the install +* Staged install using [DESTDIR][]. You can perform the install phase in a temporary directory and later move the installation into its correct location by use of the `DESTDIR` variable: @@ -366,7 +388,7 @@ without having to do step 5 again). if you want to try the system out, running test suites, etc, before doing the real install without `EXTRA_PREFIX`. -### Symbolic Links in `--bindir` ### +### Symbolic Links in --bindir ### When doing `make install` and the default installation prefix is used, relative symbolic links will be created from `/usr/local/bin` to all public @@ -380,6 +402,24 @@ passed to `configure`. One can force relative, or absolute links by passing phase. Note that such a request might cause a failure if the request cannot be satisfied. +### Pre-built Source Release ### + +The source release is delivered with a lot of platform independent +build results already pre-built. If you want to remove these pre-built +files, invoke `./otp_build remove_prebuilt_files` from the `$ERL_TOP` +directory. After you have done this, you can build exactly the same way +as before, but the build process will take a much longer time. + +> *WARNING*: Doing `make clean` in an arbitrary directory of the source +> tree, may remove files needed for bootstrapping the build. +> +> Doing `./otp_build save_bootstrap` from the `$ERL_TOP` directory before +> doing `make clean` will ensure that it will be possible to build after +> doing `make clean`. `./otp_build save_bootstrap` will be invoked +> automatically when `make` is invoked from `$ERL_TOP` with either the +> `clean` target, or the default target. It is also automatically invoked +> if `./otp_build remove_prebuilt_files` is invoked. + ### Building in Git ### When building in a Git working directory you also have to have a GNU `autoconf` @@ -394,32 +434,13 @@ content, and you may therefore have to regenerate the `configure` scripts when checking out a branch. Regenerated `configure` scripts imply that you have to run `configure` and build again. -Note that running `./otp_build autoconf` is **not** needed when building an -unmodified version the released source. +> *NOTE*: Running `./otp_build autoconf` is **not** needed when building +> an unmodified version the released source. Other useful information can be found at our github wiki: <http://wiki.github.com/erlang/otp> -Pre-built Source Tree ---------------------- - -The source tree is delivered with a lot of platform independent -build results already pre-built. If you want to remove these pre-built -files, invoke `./otp_build remove_prebuilt_files` from the `$ERL_TOP` -directory. After you have done this, you can build exactly the same way -as before, but the build process will take a much longer time. - -*NOTE*: Doing `make clean` in an arbitrary directory of the source tree, -may remove files needed for bootstrapping the build. Doing -`./otp_build save_bootstrap` from the `$ERL_TOP` directory before -doing `make clean` will ensure that it will be possible to build after -doing `make clean`. `./otp_build save_bootstrap` will be invoked -automatically when `make` is invoked from `$ERL_TOP` with either the -`clean` target, or the default target. It is also automatically invoked -if `./otp_build remove_prebuilt_files` is invoked. - -`make` and `$ERL_TOP` ---------------------- +### make and $ERL\_TOP ### All the makefiles in the entire directory tree use the environment variable `ERL_TOP` to find the absolute path of the installation. The @@ -437,8 +458,10 @@ want to rebuild the application `STDLIB`, then you could do: where `<Dir>` would be what you find `ERL_TOP` is set to in the top level Makefile. -How to Build the Erlang/OTP Documentation ------------------------------------------ +The Erlang/OTP Documentation +---------------------------- + +### How to Build the Documentation ### $ cd $ERL_TOP @@ -448,19 +471,10 @@ already ran `configure` and do not need to do this again; otherwise, run $ ./configure [Configure Args] -When building the documentation you need a full Erlang/OTP-R13B04 system in +When building the documentation you need a full Erlang/OTP-%OTP-REL% system in the `$PATH`. - $ export PATH=<Erlang/OTP-R13B04 bin dir>:$PATH # Assuming bash/sh - -This document as well as some other documents have been written using -Markdown notation. HTML versions of these documents are created and included -in the HTML documentation if the environment variable `MD2HTML` is set to a -command that generates HTML on `stdout` for a Markdown document passed as -argument. This is a last minute hack, which will be handled in a better way -in the future. We currently set `MD2HTML` as follows. - - $ export MD2HTML="perl <path to script>/Markdown.pl --html4tags" + $ export PATH=<Erlang/OTP-%OTP-REL% bin dir>:$PATH # Assuming bash/sh Build the documentation. @@ -478,13 +492,13 @@ or using the `release_docs` target. * If you have installed Erlang/OTP using the `release` target, install the documentation using the `release_docs` target. You typically want - to use the same RELEASE_ROOT as when invoking `make release`. + to use the same `RELEASE_ROOT` as when invoking `make release`. $ make release_docs RELEASE_ROOT=<release dir> -### Build Issues ### +#### Build Issues #### -We have sometimes experienced problems with suns `java` running out of +We have sometimes experienced problems with Sun's `java` running out of memory when running `fop`. Increasing the amount of memory available as follows has in our case solved the problem. @@ -493,23 +507,22 @@ as follows has in our case solved the problem. More information can be found at <http://xmlgraphics.apache.org/fop/0.95/running.html#memory>. -How to Install the Pre-formatted Erlang/OTP Documentation ---------------------------------------------------------- +### How to Install the Pre-formatted Documentation ### -Pre-formatted documentation can be downloaded at +Pre-formatted [html documentation][] and [man pages][] can be downloaded at <http://www.erlang.org/download.html>. For some graphical tools to find the on-line help you have to install the HTML documentation on top of the installed OTP applications, i.e. $ cd <ReleaseDir> - $ gunzip -c otp_html_R13B04.tar.gz | tar xf - + $ gunzip -c otp_html_%OTP-REL%.tar.gz | tar xf - For `erl -man <page>` to work the Unix manual pages have to be installed in the same way, i.e. $ cd <ReleaseDir> - $ gunzip -c otp_man_R13B04.tar.gz | tar xf - + $ gunzip -c otp_man_%OTP-REL%.tar.gz | tar xf - Where `<ReleaseDir>` is @@ -620,7 +633,7 @@ To add hipe options, write like this from the Erlang shell: 1> c(Module, [native,{hipe,HipeOptions}|MoreOptions]). -Use hipe:help_options/0 to print out the available options. +Use `hipe:help_options/0` to print out the available options. 1> hipe:help_options(). @@ -702,6 +715,7 @@ purposes. Authors ------- + Authors are mostly listed in the application's `AUTHORS` files, that is `$ERL_TOP/lib/*/AUTHORS` and `$ERL_TOP/erts/AUTHORS`, not in the individual source files. @@ -709,30 +723,44 @@ not in the individual source files. Copyright and License --------------------- -> %CopyrightBegin% -> -> Copyright Ericsson AB 1998-2010. All Rights Reserved. -> -> The contents of this file are subject to the Erlang Public License, -> Version 1.1, (the "License"); you may not use this file except in -> compliance with the License. You should have received a copy of the -> Erlang Public License along with this software. If not, it can be -> retrieved online at http://www.erlang.org/. -> -> Software distributed under the License is distributed on an "AS IS" -> basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -> the License for the specific language governing rights and limitations -> under the License. -> -> %CopyrightEnd% +%CopyrightBegin% + +Copyright Ericsson AB 1998-2010. All Rights Reserved. + +The contents of this file are subject to the Erlang Public License, +Version 1.1, (the "License"); you may not use this file except in +compliance with the License. You should have received a copy of the +Erlang Public License along with this software. If not, it can be +retrieved online at http://www.erlang.org/. + +Software distributed under the License is distributed on an "AS IS" +basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +the License for the specific language governing rights and limitations +under the License. + +%CopyrightEnd% More Information ---------------- More information can be found at <http://www.erlang.org>. +Modifying This Document +----------------------- + +Before modifying this document you need to have a look at the +`$ERL_TOP/README.md.txt` document. + + + [$ERL_TOP/INSTALL-CROSS.md]: INSTALL-CROSS + [$ERL_TOP/INSTALL-WIN32.md]: INSTALL-WIN32 + [DESTDIR]: http://www.gnu.org/prep/standards/html_node/DESTDIR.html + [Building in Git]: #How-to-Build-and-Install-ErlangOTP_Building-in-Git + [Pre-built Source Release]: #How-to-Build-and-Install-ErlangOTP_Prebuilt-Source-Release + [make and $ERL_TOP]: #How-to-Build-and-Install-ErlangOTP_make-and-ERLTOP + [html documentation]: http://www.erlang.org/download/otp_doc_html_%OTP-REL%.tar.gz + [man pages]: http://www.erlang.org/download/otp_doc_man_%OTP-REL%.tar.gz + [the released source tar ball]: http://www.erlang.org/download/otp_src_%OTP-REL%.tar.gz - [1]: INSTALL-CROSS.html "$ERL_TOP/INSTALL-CROSS.md" - [2]: INSTALL-WIN32.html "$ERL_TOP/INSTALL-WIN32.md" - [3]: http://www.gnu.org/prep/standards/html_node/DESTDIR.html "DESTDIR" + [?TOC]: true |