diff options
Diffstat (limited to 'erts/doc/src/erl_driver.xml')
| -rw-r--r-- | erts/doc/src/erl_driver.xml | 326 |
1 files changed, 275 insertions, 51 deletions
diff --git a/erts/doc/src/erl_driver.xml b/erts/doc/src/erl_driver.xml index 2fb03954b6..b5df4ca0c8 100644 --- a/erts/doc/src/erl_driver.xml +++ b/erts/doc/src/erl_driver.xml @@ -37,15 +37,18 @@ <p>As of erts version 5.5.3 the driver interface has been extended (see <seealso marker="driver_entry#extended_marker">extended marker</seealso>). The extended interface introduce - <seealso marker="erl_driver#version_management">version management</seealso>, + <seealso marker="#version_management">version management</seealso>, the possibility to pass capability flags (see <seealso marker="driver_entry#driver_flags">driver flags</seealso>) to the runtime system at driver initialization, and some new driver API functions. </p> <note> - <p>Old drivers (compiled with an <c>erl_driver.h</c> from an - earlier erts version than 5.5.3) have to be recompiled - (but does not have to use the extended interface).</p> + <p>As of erts version 5.9 old drivers has to be recompiled + and has to use the extended interface. They also has to be + adjusted to the + <seealso marker="#rewrites_for_64_bits">64-bit capable driver interface. + </seealso> + </p> </note> <p>The driver calls back to the emulator, using the API functions declared in <c>erl_driver.h</c>. They are used for @@ -242,9 +245,9 @@ </p> </item> <tag>Adding / removing drivers</tag> - <item>A driver can add and later remove drivers.</item> + <item><p>A driver can add and later remove drivers.</p></item> <tag>Monitoring processes</tag> - <item>A driver can monitor a process that does not own a port.</item> + <item><p>A driver can monitor a process that does not own a port.</p></item> <tag><marker id="version_management">Version management</marker></tag> <item> <p>Version management is enabled for drivers that have set the @@ -268,15 +271,203 @@ versions differ, or if the major versions are equal and the minor version used by the driver is greater than the one used by the runtime system.</p> - <p>The emulator tries to check that a driver that doesn't use the - extended driver interface isn't incompatible when loading it. - It can, however, not make sure that it isn't incompatible. Therefore, - when loading a driver that doesn't use the extended driver - interface, there is a risk that it will be loaded also when - the driver is incompatible. When the driver uses the extended driver - interface, the emulator can verify that it isn't of an incompatible - driver version. You are therefore advised to use the extended driver - interface.</p> + <p>The emulator will refuse to load a driver that does not use + the extended driver interface since, + to allow for 64-bit capable drivers, + incompatible type changes for the callbacks + <seealso marker="driver_entry#output">output</seealso>, + <seealso marker="driver_entry#control">control</seealso> and + <seealso marker="driver_entry#call">call</seealso> + were introduced in release R15B. A driver written + with the old types would compile with warnings and when + called return garbage sizes to the emulator causing it + to read random memory and create huge incorrect result blobs.</p> + <p>Therefore it is not enough to just recompile drivers written with + version management for pre-R15B types; the types has to be changed + in the driver suggesting other rewrites especially regarding + size variables. Investigate all warnings when recompiling!</p> + <p>Also, the API driver functions <c>driver_output*</c>, + <c>driver_vec_to_buf</c>, <c>driver_alloc/realloc*</c> + and the <c>driver_*</c> queue functions were changed to have + larger length arguments and return values. This is a + lesser problem since code that passes smaller types + will get them auto converted in the calls and as long as + the driver does not handle sizes that overflow an <c>int</c> + all will work as before.</p> + </item> + </taglist> + </section> + + <section> + <marker id="rewrites_for_64_bits"/> + <title> + REWRITES FOR 64-BIT DRIVER INTERFACE + </title> + <p> + For erts-5.9 two new integer types + <seealso marker="#ErlDrvSizeT">ErlDrvSizeT</seealso> and + <seealso marker="#ErlDrvSSizeT">ErlDrvSSizeT</seealso> + were introduced that can hold 64-bit sizes if necessary. + </p> + <p> + To not update a driver and just recompile it probably works + when building for a 32-bit machine creating a false sense of security. + Hopefully that will generate many important warnings. + But when recompiling the same driver later on for a 64-bit machine + there <em>will</em> be warnings and almost certainly crashes. + So it is a BAD idea to postpone updating the driver and + not fixing the warnings! + </p> + <p> + When recompiling with <c>gcc</c> use the <c>-Wstrict-prototypes</c> + flag to get better warnings. Try to find a similar flag if you + are using some other compiler. + </p> + <p> + Here follows a checklist for rewriting a pre erts-5.9 driver, + most important first. + </p> + <taglist> + <tag>Return types for driver callbacks</tag> + <item> + <p> + Rewrite driver callback + <c><seealso marker="driver_entry#control">control</seealso></c> + to use return type <c>ErlDrvSSizeT</c> instead of <c>int</c>. + </p> + <p> + Rewrite driver callback + <c><seealso marker="driver_entry#call">call</seealso></c> + to use return type <c>ErlDrvSSizeT</c> instead of <c>int</c>. + </p> + <note> + <p> + These changes are essential to not crash the emulator + or worse cause malfunction. + Without them a driver may return garbage in the high 32 bits + to the emulator causing it to build a huge result from random + bytes either crashing on memory allocation or succeeding with + a random result from the driver call. + </p> + </note> + </item> + <tag>Arguments to driver callbacks</tag> + <item> + <p> + Driver callback + <c><seealso marker="driver_entry#output">output</seealso></c> + now gets <c>ErlDrvSizeT</c> as 3:rd argument instead + of previously <c>int</c>. + </p> + <p> + Driver callback + <c><seealso marker="driver_entry#control">control</seealso></c> + now gets <c>ErlDrvSizeT</c> as 4:th and 6:th arguments instead + of previously <c>int</c>. + </p> + <p> + Driver callback + <c><seealso marker="driver_entry#call">call</seealso></c> + now gets <c>ErlDrvSizeT</c> as 4:th and 6:th arguments instead + of previously <c>int</c>. + </p> + <p> + Sane compiler's calling conventions probably make these changes + necessary only for a driver to handle data chunks that require + 64-bit size fields (mostly larger than 2 GB since that is what + an <c>int</c> of 32 bits can hold). But it is possible to think + of non-sane calling conventions that would make the driver + callbacks mix up the arguments causing malfunction. + </p> + <note> + <p> + The argument type change is from signed to unsigned which + may cause problems for e.g. loop termination conditions or + error conditions if you just change the types all over the place. + </p> + </note> + </item> + <tag>Larger <c>size</c> field in <c>ErlIOVec</c></tag> + <item> + <p> + The <c>size</c> field in + <seealso marker="#ErlIOVec"><c>ErlIOVec</c></seealso> + has been changed to <c>ErlDrvSizeT</c> from <c>int</c>. + Check all code that use that field. + </p> + <p> + Automatic type casting probably makes these changes necessary only + for a driver that encounters sizes larger than 32 bits. + </p> + <note> + <p> + The <c>size</c> field changed from signed to unsigned which + may cause problems for e.g. loop termination conditions or + error conditions if you just change the types all over the place. + </p> + </note> + </item> + <tag>Arguments and return values in the driver API</tag> + <item> + <p> + Many driver API functions has changed argument type + and/or return value to <c>ErlDrvSizeT</c> from mostly <c>int</c>. + Automatic type casting probably makes these changes necessary only + for a driver that encounters sizes larger than 32 bits. + </p> + <taglist> + <tag><seealso marker="#driver_output">driver_output</seealso></tag> + <item>3:rd argument</item> + <tag><seealso marker="#driver_output2">driver_output2</seealso></tag> + <item>3:rd and 5:th arguments</item> + <tag> + <seealso marker="#driver_output_binary">driver_output_binary</seealso> + </tag> + <item>3:rd 5:th and 6:th arguments</item> + <tag><seealso marker="#driver_outputv">driver_outputv</seealso></tag> + <item>3:rd and 5:th arguments</item> + <tag> + <seealso marker="#driver_vec_to_buf">driver_vec_to_buf</seealso> + </tag> + <item>3:rd argument and return value</item> + <tag><seealso marker="#driver_alloc">driver_alloc</seealso></tag> + <item>1:st argument</item> + <tag><seealso marker="#driver_realloc">driver_realloc</seealso></tag> + <item>2:nd argument</item> + <tag> + <seealso marker="#driver_alloc_binary">driver_alloc_binary</seealso> + </tag> + <item>1:st argument</item> + <tag> + <seealso marker="#driver_realloc_binary">driver_realloc_binary</seealso> + </tag> + <item>2:nd argument</item> + <tag><seealso marker="#driver_enq">driver_enq</seealso></tag> + <item>3:rd argument</item> + <tag><seealso marker="#driver_pushq">driver_pushq</seealso></tag> + <item>3:rd argument</item> + <tag><seealso marker="#driver_deq">driver_deq</seealso></tag> + <item>2:nd argument and return value</item> + <tag><seealso marker="#driver_sizeq">driver_sizeq</seealso></tag> + <item>return value</item> + <tag><seealso marker="#driver_enq_bin">driver_enq_bin</seealso></tag> + <item>3:rd and 4:th argument</item> + <tag><seealso marker="#driver_pushq_bin">driver_pushq_bin</seealso></tag> + <item>3:rd and 4:th argument</item> + <tag><seealso marker="#driver_enqv">driver_enqv</seealso></tag> + <item>3:rd argument</item> + <tag><seealso marker="#driver_pushqv">driver_pushqv</seealso></tag> + <item>3:rd argument</item> + <tag><seealso marker="#driver_peekqv">driver_peekqv</seealso></tag> + <item>return value</item> + </taglist> + <note> + <p> + This is a change from signed to unsigned which + may cause problems for e.g. loop termination conditions and + error conditions if you just change the types all over the place. + </p> + </note> </item> </taglist> </section> @@ -285,7 +476,11 @@ <title>DATA TYPES</title> <taglist> - <tag><marker id="ErlDrvSysInfo"/>ErlDrvSysInfo</tag> + <tag><marker id="ErlDrvSizeT"/>ErlDrvSizeT</tag> + <item><p>An unsigned integer type to be used as <c>size_t</c></p></item> + <tag><marker id="ErlDrvSSizeT"/>ErlDrvSSizeT</tag> + <item><p>A signed integer type the size of <c>ErlDrvSizeT</c></p></item> + <tag><marker id="ErlDrvSysInfo"/>ErlDrvSysInfo</tag> <item> <p/> <code type="none"> @@ -332,12 +527,12 @@ typedef struct ErlDrvSysInfo { <tag><c>erts_version</c></tag> <item>A string containing the version number of the runtime system (the same as returned by - <seealso marker="erts:erlang#system_info_version">erlang:system_info(version)</seealso>). + <seealso marker="erlang#system_info_version">erlang:system_info(version)</seealso>). </item> <tag><c>otp_release</c></tag> <item>A string containing the OTP release number (the same as returned by - <seealso marker="erts:erlang#system_info_otp_release">erlang:system_info(otp_release)</seealso>). + <seealso marker="erlang#system_info_otp_release">erlang:system_info(otp_release)</seealso>). </item> <tag><c>thread_support</c></tag> <item>A value <c>!= 0</c> if the runtime system has thread support; @@ -351,12 +546,12 @@ typedef struct ErlDrvSysInfo { <item>The number of async threads in the async thread pool used by <seealso marker="#driver_async">driver_async()</seealso> (the same as returned by - <seealso marker="erts:erlang#system_info_thread_pool_size">erlang:system_info(thread_pool_size)</seealso>). + <seealso marker="erlang#system_info_thread_pool_size">erlang:system_info(thread_pool_size)</seealso>). </item> <tag><c>scheduler_threads</c></tag> <item>The number of scheduler threads used by the runtime system (the same as returned by - <seealso marker="erts:erlang#system_info_schedulers">erlang:system_info(schedulers)</seealso>). + <seealso marker="erlang#system_info_schedulers">erlang:system_info(schedulers)</seealso>). </item> <tag><c>nif_major_version</c></tag> <item>The value of <c>ERL_NIF_MAJOR_VERSION</c> when the runtime system was compiled. @@ -371,7 +566,7 @@ typedef struct ErlDrvSysInfo { <p/> <code type="none"> typedef struct ErlDrvBinary { - int orig_size; + ErlDrvSint orig_size; char orig_bytes[]; } ErlDrvBinary; </code> @@ -423,7 +618,7 @@ typedef struct ErlDrvBinary { <item> <p>The <c>ErlDrvData</c> is a handle to driver-specific data, passed to the driver call-backs. It is a pointer, and is - most often casted to a specific pointer in the driver.</p> + most often type casted to a specific pointer in the driver.</p> </item> <tag>SysIOVec</tag> <item> @@ -437,7 +632,7 @@ typedef struct ErlDrvBinary { <code type="none"> typedef struct ErlIOVec { int vsize; - int size; + ErlDrvSizeT size; SysIOVec* iov; ErlDrvBinary** binv; } ErlIOVec; @@ -630,7 +825,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_output(ErlDrvPort port, char *buf, int len)</nametext></name> + <name><ret>int</ret><nametext>driver_output(ErlDrvPort port, char *buf, ErlDrvSizeT len)</nametext></name> <fsummary>Send data from driver to port owner</fsummary> <desc> <marker id="driver_output"></marker> @@ -650,7 +845,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_output2(ErlDrvPort port, char *hbuf, int hlen, char *buf, int len)</nametext></name> + <name><ret>int</ret><nametext>driver_output2(ErlDrvPort port, char *hbuf, ErlDrvSizeT hlen, char *buf, ErlDrvSizeT len)</nametext></name> <fsummary>Send data and binary data to port owner</fsummary> <desc> <marker id="driver_output2"></marker> @@ -665,7 +860,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_output_binary(ErlDrvPort port, char *hbuf, int hlen, ErlDrvBinary* bin, int offset, int len)</nametext></name> + <name><ret>int</ret><nametext>driver_output_binary(ErlDrvPort port, char *hbuf, ErlDrvSizeT hlen, ErlDrvBinary* bin, ErlDrvSizeT offset, ErlDrvSizeT len)</nametext></name> <fsummary>Send data from a driver binary to port owner</fsummary> <desc> <marker id="driver_output_binary"></marker> @@ -688,7 +883,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_outputv(ErlDrvPort port, char* hbuf, int hlen, ErlIOVec *ev, int skip)</nametext></name> + <name><ret>int</ret><nametext>driver_outputv(ErlDrvPort port, char* hbuf, ErlDrvSizeT hlen, ErlIOVec *ev, ErlDrvSizeT skip)</nametext></name> <fsummary>Send vectorized data to port owner</fsummary> <desc> <marker id="driver_outputv"></marker> @@ -711,7 +906,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_vec_to_buf(ErlIOVec *ev, char *buf, int len)</nametext></name> + <name><ret>ErlDrvSizeT</ret><nametext>driver_vec_to_buf(ErlIOVec *ev, char *buf, ErlDrvSizeT len)</nametext></name> <fsummary>Collect data segments into a buffer</fsummary> <desc> <marker id="driver_vec_to_buf"></marker> @@ -738,7 +933,7 @@ typedef struct ErlIOVec { <c>time</c> parameter is the time in milliseconds before the timer expires.</p> <p>When the timer reaches 0 and expires, the driver entry - function <seealso marker="driver_entry#emulator">timeout</seealso> is called.</p> + function <seealso marker="driver_entry#timeout">timeout</seealso> is called.</p> <p>Note that there is only one timer on each driver instance; setting a new timer will replace an older one.</p> <p>Return value is 0 (-1 only when the <c>timeout</c> driver @@ -832,7 +1027,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>void *</ret><nametext>driver_alloc(size_t size)</nametext></name> + <name><ret>void *</ret><nametext>driver_alloc(ErlDrvSizeT size)</nametext></name> <fsummary>Allocate memory</fsummary> <desc> <marker id="driver_alloc"></marker> @@ -846,7 +1041,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>void *</ret><nametext>driver_realloc(void *ptr, size_t size)</nametext></name> + <name><ret>void *</ret><nametext>driver_realloc(void *ptr, ErlDrvSizeT size)</nametext></name> <fsummary>Resize an allocated memory block</fsummary> <desc> <marker id="driver_realloc"></marker> @@ -872,7 +1067,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>ErlDrvBinary*</ret><nametext>driver_alloc_binary(int size)</nametext></name> + <name><ret>ErlDrvBinary*</ret><nametext>driver_alloc_binary(ErlDrvSizeT size)</nametext></name> <fsummary>Allocate a driver binary</fsummary> <desc> <marker id="driver_alloc_binary"></marker> @@ -892,7 +1087,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>ErlDrvBinary*</ret><nametext>driver_realloc_binary(ErlDrvBinary *bin, int size)</nametext></name> + <name><ret>ErlDrvBinary*</ret><nametext>driver_realloc_binary(ErlDrvBinary *bin, ErlDrvSizeT size)</nametext></name> <fsummary>Resize a driver binary</fsummary> <desc> <marker id="driver_realloc_binary"></marker> @@ -958,7 +1153,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_enq(ErlDrvPort port, char* buf, int len)</nametext></name> + <name><ret>int</ret><nametext>driver_enq(ErlDrvPort port, char* buf, ErlDrvSizeT len)</nametext></name> <fsummary>Enqueue data in the driver queue</fsummary> <desc> <marker id="driver_enq"></marker> @@ -982,7 +1177,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_pushq(ErlDrvPort port, char* buf, int len)</nametext></name> + <name><ret>int</ret><nametext>driver_pushq(ErlDrvPort port, char* buf, ErlDrvSizeT len)</nametext></name> <fsummary>Push data at the head of the driver queue</fsummary> <desc> <marker id="driver_pushq"></marker> @@ -997,7 +1192,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_deq(ErlDrvPort port, int size)</nametext></name> + <name><ret>ErlDrvSizeT</ret><nametext>driver_deq(ErlDrvPort port, ErlDrvSizeT size)</nametext></name> <fsummary>Dequeue data from the head of the driver queue</fsummary> <desc> <marker id="driver_deq"></marker> @@ -1013,7 +1208,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_sizeq(ErlDrvPort port)</nametext></name> + <name><ret>ErlDrvSizeT</ret><nametext>driver_sizeq(ErlDrvPort port)</nametext></name> <fsummary>Return the size of the driver queue</fsummary> <desc> <marker id="driver_sizeq"></marker> @@ -1026,7 +1221,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_enq_bin(ErlDrvPort port, ErlDrvBinary *bin, int offset, int len)</nametext></name> + <name><ret>int</ret><nametext>driver_enq_bin(ErlDrvPort port, ErlDrvBinary *bin, ErlDrvSizeT offset, ErlDrvSizeT len)</nametext></name> <fsummary>Enqueue binary in the driver queue</fsummary> <desc> <marker id="driver_enq_bin"></marker> @@ -1043,7 +1238,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_pushq_bin(ErlDrvPort port, ErlDrvBinary *bin, int offset, int len)</nametext></name> + <name><ret>int</ret><nametext>driver_pushq_bin(ErlDrvPort port, ErlDrvBinary *bin, ErlDrvSizeT offset, ErlDrvSizeT len)</nametext></name> <fsummary>Push binary at the head of the driver queue</fsummary> <desc> <marker id="driver_pushq_bin"></marker> @@ -1060,13 +1255,35 @@ typedef struct ErlIOVec { </desc> </func> <func> + <name><ret>ErlDrvSizeT</ret><nametext>driver_peekqv(ErlDrvPort port, ErlIOVec *ev)</nametext></name> + <fsummary>Get the driver queue as an IO vector</fsummary> + <desc> + <marker id="driver_peekqv"></marker> + <p> + This function retrieves the driver queue into a supplied + <c>ErlIOVec</c> <c>ev</c>. It also returns the queue size. + This is one of two ways to get data out of the queue. + </p> + <p> + If <c>ev</c> is <c>NULL</c> all ones i.e. <c>-1</c> type cast to + <c>ErlDrvSizeT</c> is returned. + </p> + <p>Nothing is removed from the queue by this function, that must be done + with <c>driver_deq</c>.</p> + <p>This function can be called from an arbitrary thread if a + <seealso marker="#ErlDrvPDL">port data lock</seealso> + associated with the <c>port</c> is locked by the calling + thread during the call.</p> + </desc> + </func> + <func> <name><ret>SysIOVec*</ret><nametext>driver_peekq(ErlDrvPort port, int *vlen)</nametext></name> <fsummary>Get the driver queue as a vector</fsummary> <desc> <marker id="driver_peekq"></marker> <p>This function retrieves the driver queue as a pointer to an array of <c>SysIOVec</c>s. It also returns the number of - elements in <c>vlen</c>. This is the only way to get data + elements in <c>vlen</c>. This is one of two ways to get data out of the queue.</p> <p>Nothing is removed from the queue by this function, that must be done with <c>driver_deq</c>.</p> @@ -1079,7 +1296,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_enqv(ErlDrvPort port, ErlIOVec *ev, int skip)</nametext></name> + <name><ret>int</ret><nametext>driver_enqv(ErlDrvPort port, ErlIOVec *ev, ErlDrvSizeT skip)</nametext></name> <fsummary>Enqueue vector in the driver queue</fsummary> <desc> <marker id="driver_enqv"></marker> @@ -1095,7 +1312,7 @@ typedef struct ErlIOVec { </desc> </func> <func> - <name><ret>int</ret><nametext>driver_pushqv(ErlDrvPort port, ErlIOVec *ev, int skip)</nametext></name> + <name><ret>int</ret><nametext>driver_pushqv(ErlDrvPort port, ErlIOVec *ev, ErlDrvSizeT skip)</nametext></name> <fsummary>Push vector at the head of the driver queue</fsummary> <desc> <marker id="driver_pushqv"></marker> @@ -1494,7 +1711,7 @@ ERL_DRV_EXT2TERM char *buf, ErlDrvUInt len term encoded with the <seealso marker="erl_ext_dist">external format</seealso>, i.e., a term that has been encoded by - <seealso marker="erts:erlang#term_to_binary/2">erlang:term_to_binary</seealso>, + <seealso marker="erlang#term_to_binary/2">erlang:term_to_binary</seealso>, <seealso marker="erl_interface:ei">erl_interface</seealso>, etc. For example, if <c>binp</c> is a pointer to an <c>ErlDrvBinary</c> that contains the term <c>{17, 4711}</c> encoded with the @@ -1638,12 +1855,19 @@ ERL_DRV_EXT2TERM char *buf, ErlDrvUInt len <fsummary>Cancel an asynchronous call</fsummary> <desc> <marker id="driver_async_cancel"></marker> - <p>This function cancels an asynchronous operation, by removing - it from the queue. Only functions in the queue can be - cancelled; if a function is executing, it's too late to - cancel it. The <c>async_free</c> function is also called.</p> - <p>The return value is 1 if the operation was removed from the - queue, otherwise 0.</p> + <p>This function used to cancel a scheduled asynchronous operation, + if it was still in the queue. It returned 1 if it succeeded, and + 0 if it failed.</p> + <p>Since it could not guarantee success, it was more or less useless. + The user had to implement synchronization of cancellation anyway. + It also unnecessarily complicated the implementation. Therefore, + as of OTP-R15B <c>driver_async_cancel()</c> is deprecated, and + scheduled for removal in OTP-R16. It will currently always fail, + and return 0.</p> + <warning><p><c>driver_async_cancel()</c> is deferred and will + be removed in the OTP-R16 release.</p> + </warning> + </desc> </func> <func> @@ -1687,7 +1911,7 @@ ERL_DRV_EXT2TERM char *buf, ErlDrvUInt len The driver defined handle is normally created in the <seealso marker="driver_entry#start">driver start call-back</seealso> when a port is created via - <seealso marker="erts:erlang#open_port/2">erlang:open_port/2</seealso>. </item> + <seealso marker="erlang#open_port/2">erlang:open_port/2</seealso>. </item> </taglist> <p>The caller of <c>driver_create_port()</c> is allowed to manipulate the newly created port when <c>driver_create_port()</c> @@ -2455,7 +2679,7 @@ ERL_DRV_EXT2TERM char *buf, ErlDrvUInt len <title>SEE ALSO</title> <p><seealso marker="driver_entry">driver_entry(3)</seealso>, <seealso marker="kernel:erl_ddll">erl_ddll(3)</seealso>, - <seealso marker="erts:erlang">erlang(3)</seealso></p> + <seealso marker="erlang">erlang(3)</seealso></p> <p>An Alternative Distribution Driver (ERTS User's Guide Ch. 3)</p> </section> |