diff options
Diffstat (limited to 'erts/doc/src/erlang.xml')
-rw-r--r-- | erts/doc/src/erlang.xml | 870 |
1 files changed, 725 insertions, 145 deletions
diff --git a/erts/doc/src/erlang.xml b/erts/doc/src/erlang.xml index 30e6751f41..3276bc34b0 100644 --- a/erts/doc/src/erlang.xml +++ b/erts/doc/src/erlang.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1996</year><year>2015</year> + <year>1996</year><year>2016</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -59,6 +59,12 @@ </datatype> <datatype> + <name name="message_queue_data"></name> + <desc><p>See <seealso marker="#process_flag_message_queue_data"><c>erlang:process_flag(message_queue_data, MQD)</c></seealso>.</p> + </desc> + </datatype> + + <datatype> <name name="timestamp"></name> <desc><p>See <seealso marker="#timestamp/0">erlang:timestamp/0</seealso>.</p> </desc> @@ -125,6 +131,17 @@ </note> </item> + <tag><c>perf_counter</c></tag> + <item><p>Symbolic representation of the performance counter + time unit used by the Erlang runtime system.</p> + + <p>The <c>perf_counter</c> time unit behaves much in the same way + as the <c>native</c> time unit. That is it might differ inbetween + run-time restarts. You get values of this type by calling + <seealso marker="kernel:os#perf_counter/0"><c>os:perf_counter()</c></seealso> + </p> + </item> + </taglist> <p>The <c>time_unit/0</c> type may be extended. Use @@ -1105,7 +1122,7 @@ <fsummary>Prints a term on standard output.</fsummary> <desc> <p>Prints a text representation of <c><anno>Term</anno></c> on the - standard output. On OSE, the term is printed to the ramlog.</p> + standard output.</p> <warning> <p>This BIF is intended for debugging only.</p> </warning> @@ -2596,6 +2613,48 @@ os_prompt% </pre> </func> <func> + <name name="match_spec_test" arity="3"/> + <fsummary>Test that a match specification works</fsummary> + <desc> + <p> + This function is a utility to test a match_spec used in calls to + <seealso marker="stdlib:ets#select/2">ets:select/2</seealso> and + <seealso marker="#trace_pattern/3">erlang:trace_pattern/3</seealso>. + The function both tests MatchSpec for "syntactic" correctness and + runs the match_spec against the object. If the match_spec contains + errors, the tuple {error, Errors} is returned where Errors is a list + of natural language descriptions of what was wrong with the match_spec. + </p> + <p> + If the <c><anno>Type</anno></c> is <c>table</c> the object to match + against should be a tuple. The function then returns + {ok,Result,[],Warnings} where Result is what would have been the + result in a real ets:select/2 call or false if the match_spec does + not match the object tuple. + </p> + + <p> + If <c><anno>Type</anno></c> is <c>trace</c> the object to match + against should be a list. The function returns + {ok, Result, Flags, Warnings} where Result is <c>true</c> if a trace + message should be emitted, <c>false</c> if a trace message should not + be emitted or the message term to be appended to the trace message. + Flags is a list containing all the trace flags that will be enabled, + at the moment this is only <c>return_trace</c>. + </p> + + <p> + This is a useful debugging and test tool, especially when writing complicated + match specifications. + </p> + <p> + See also + <seealso marker="stdlib:ets#test_ms/2">ets:test_ms/2</seealso>. + </p> + </desc> + </func> + + <func> <name name="max" arity="2"/> <fsummary>Returns the largest of two terms.</fsummary> <desc> @@ -4281,9 +4340,59 @@ os_prompt% </pre> <p>Returns the old value of the flag.</p> </desc> </func> - + <marker id="process_flag_message_queue_data"/> <func> <name name="process_flag" arity="2" clause_i="5"/> + <fsummary>Set process flag <c>message_queue_data</c> for the calling process</fsummary> + <type name="message_queue_data"/> + <desc> + <p>This flag determines how messages in the message queue + are stored. When the flag is:</p> + <taglist> + <tag><c>off_heap</c></tag> + <item><p> + <em>All</em> messages in the message queue will be stored + outside of the process heap. This implies that <em>no</em> + messages in the message queue will be part of a garbage + collection of the process. + </p></item> + <tag><c>on_heap</c></tag> + <item><p> + All messages in the message queue will eventually be + placed on heap. They may however temporarily be stored + off heap. This is how messages always have been stored + up until ERTS version 8.0. + </p></item> + <tag><c>mixed</c></tag> + <item><p> + Messages may be placed either on the heap or outside + of the heap. + </p></item> + </taglist> + <p> + The default <c>message_queue_data</c> process flag is determined + by the <seealso marker="erl#+hmqd"><c>+hmqd</c></seealso> + <c>erl</c> command line argument. + </p> + <p> + If the process potentially may get a hugh amount of messages, + you are recommended to set the flag to <c>off_heap</c>. This + since a garbage collection with lots of messages placed on + the heap may become extremly expensive and the process may + consume large amounts of memory. Performance of the + actual message passing is however generally better when not + using the <c>off_heap</c> flag. + </p> + <p> + When changing this flag messages will be moved. This work + has been initiated but not completed when this function + call returns. + </p> + <p>Returns the old value of the flag.</p> + </desc> + </func> + <func> + <name name="process_flag" arity="2" clause_i="6"/> <fsummary>Sets process flag <c>priority</c> for the calling process.</fsummary> <type name="priority_level"/> <desc> @@ -4357,7 +4466,7 @@ os_prompt% </pre> </func> <func> - <name name="process_flag" arity="2" clause_i="6"/> + <name name="process_flag" arity="2" clause_i="7"/> <fsummary>Sets process flag <c>save_calls</c> for the calling process.</fsummary> <desc> <p><c><anno>N</anno></c> must be an integer in the interval 0..10000. @@ -4388,7 +4497,7 @@ os_prompt% </pre> </func> <func> - <name name="process_flag" arity="2" clause_i="7"/> + <name name="process_flag" arity="2" clause_i="8"/> <fsummary>Sets process flag <c>sensitive</c> for the calling process.</fsummary> <desc> <p>Sets or clears flag <c>sensitive</c> for the current process. @@ -4442,6 +4551,7 @@ os_prompt% </pre> <type name="process_info_result_item"/> <type name="priority_level"/> <type name="stack_item"/> + <type name="message_queue_data" /> <desc> <p>Returns a list containing <c><anno>InfoTuple</anno></c>s with miscellaneous information about the process identified by @@ -4494,6 +4604,7 @@ os_prompt% </pre> <type name="process_info_result_item"/> <type name="stack_item"/> <type name="priority_level"/> + <type name="message_queue_data" /> <desc> <p>Returns information about the process identified by <c><anno>Pid</anno></c>, as specified by @@ -4585,6 +4696,17 @@ os_prompt% </pre> The content of <c><anno>GCInfo</anno></c> can be changed without prior notice.</p> </item> + <tag><c>{garbage_collection_info, <anno>GCInfo</anno>}</c></tag> + <item> + <p><c><anno>GCInfo</anno></c> is a list containing miscellaneous + detailed information about garbage collection for this process. + The content of <c><anno>GCInfo</anno></c> can be changed without + prior notice. + See <seealso marker="#gc_minor_start">gc_minor_start</seealso> in + <seealso marker="#trace/3">erlang:trace/3</seealso> for details about + what each item means. + </p> + </item> <tag><c>{group_leader, <anno>GroupLeader</anno>}</c></tag> <item> <p><c><anno>GroupLeader</anno></c> is group leader for the I/O of @@ -4662,6 +4784,15 @@ os_prompt% </pre> monitor by name, the list item is <c>{process, {<anno>RegName</anno>, <anno>Node</anno>}}</c>.</p> </item> + <tag><c>{message_queue_data, <anno>MQD</anno>}</c></tag> + <item> + <p>Returns the current state of the <c>message_queue_data</c> + process flag. <c><anno>MQD</anno></c> is either <c>off_heap</c>, + <c>on_heap</c>, or <c>mixed</c>. For more information, see the + documentation of + <seealso marker="#process_flag_message_queue_data"><c>process_flag(message_queue_data, + MQD)</c></seealso>.</p> + </item> <tag><c>{priority, <anno>Level</anno>}</c></tag> <item> <p><c><anno>Level</anno></c> is the current priority level for @@ -4747,7 +4878,9 @@ os_prompt% </pre> <tag><c>{total_heap_size, <anno>Size</anno>}</c></tag> <item> <p><c><anno>Size</anno></c> is the total size, in words, of all heap - fragments of the process. This includes the process stack.</p> + fragments of the process. This includes the process stack and + any unreceived messages that are considered to be part of the + heap. </p> </item> <tag><c>{trace, <anno>InternalTraceFlags</anno>}</c></tag> <item> @@ -4804,6 +4937,12 @@ os_prompt% </pre> <seealso marker="kernel:code">code(3)</seealso>) and is not to be used elsewhere.</p> </warning> + <note> + <p>As from <c>ERTS</c> 8.0 (OTP 19), any lingering processes + that still execute the old code will be killed by this function. + In earlier versions, such incorrect use could cause much + more fatal failures, like emulator crash.</p> + </note> <p>Failure: <c>badarg</c> if there is no old code for <c><anno>Module</anno></c>.</p> </desc> @@ -5430,6 +5569,8 @@ true</pre> <name name="spawn_opt" arity="2"/> <fsummary>Creates a new process with a fun as entry point.</fsummary> <type name="priority_level"/> + <type name="message_queue_data" /> + <type name="spawn_opt_option" /> <desc> <p>Returns the process identifier (pid) of a new process started by the application of <c><anno>Fun</anno></c> @@ -5445,6 +5586,8 @@ true</pre> <name name="spawn_opt" arity="3"/> <fsummary>Creates a new process with a fun as entry point on a given node.</fsummary> <type name="priority_level"/> + <type name="message_queue_data" /> + <type name="spawn_opt_option" /> <desc> <p>Returns the process identifier (pid) of a new process started by the application of <c><anno>Fun</anno></c> to the @@ -5459,6 +5602,8 @@ true</pre> <name name="spawn_opt" arity="4"/> <fsummary>Creates a new process with a function as entry point.</fsummary> <type name="priority_level"/> + <type name="message_queue_data" /> + <type name="spawn_opt_option" /> <desc> <p>Works as <seealso marker="#spawn/3">spawn/3</seealso>, except that an @@ -5560,6 +5705,18 @@ true</pre> fine-tuning an application and to measure the execution time with various <c><anno>VSize</anno></c> values.</p> </item> + <tag><c>{message_queue_data, <anno>MQD</anno>}</c></tag> + <item> + <p>Sets the state of the <c>message_queue_data</c> process + flag. <c><anno>MQD</anno></c> should be either <c>off_heap</c>, + <c>on_heap</c>, or <c>mixed</c>. The default + <c>message_queue_data</c> process flag is determined by the + <seealso marker="erl#+hmqd"><c>+hmqd</c></seealso> <c>erl</c> + command line argument. For more information, see the + documentation of + <seealso marker="#process_flag_message_queue_data"><c>process_flag(message_queue_data, + <anno>MQD</anno>)</c></seealso>.</p> + </item> </taglist> </desc> </func> @@ -5568,6 +5725,8 @@ true</pre> <name name="spawn_opt" arity="5"/> <fsummary>Creates a new process with a function as entry point on a given node.</fsummary> <type name="priority_level"/> + <type name="message_queue_data" /> + <type name="spawn_opt_option" /> <desc> <p>Returns the process identifier (pid) of a new process started by the application @@ -5756,6 +5915,146 @@ true</pre> <func> <name name="statistics" arity="1" clause_i="6"/> + <fsummary>Information about microstate accounting.</fsummary> + <desc> + <marker id="statistics_microstate_accounting"></marker> + <p> + Microstate accounting can be used to measure how much time the Erlang + runtime system spends doing various tasks. It is designed to be as + lightweight as possible, but there will be some overhead when this + is enabled. Microstate accounting is meant to be a profiling tool + to help figure out performance bottlenecks. + To <c>start</c>/<c>stop</c>/<c>reset</c> microstate_accounting you use + the system_flag + <seealso marker="#system_flag_microstate_accounting"> + <c>microstate_accounting</c></seealso>. + </p> + <p> + <c>erlang:statistics(microstate_accounting)</c> returns a list of maps + representing some of the OS threads within ERTS. Each map contains + <c>type</c> and <c>id</c> fields that can be used to identify what + thread it is, and also a counters field that contains data about how + much time has been spent in the various states.</p> + <pre> +> <input>erlang:statistics(microstate_accounting).</input> +[#{counters => #{aux => 1899182914, + check_io => 2605863602, + emulator => 45731880463, + gc => 1512206910, + other => 5421338456, + port => 221631, + sleep => 5150294100}, + id => 1, + type => scheduler}|...] + </pre> + <p>The time unit is the same as returned by + <seealso marker="kernel:os#perf_counter/0"> + <c>os:perf_counter/0</c></seealso>. + So to convert it to milliseconds you could do something like this:</p> + <pre> +lists:map( + fun(#{ counters := Cnt } = M) -> + MsCnt = maps:map(fun(_K, PerfCount) -> + erlang:convert_time_unit(PerfCount, perf_counter, 1000) + end, Cnt), + M#{ counters := MsCnt } + end, erlang:statistics(microstate_accounting)). + </pre> + <p> + It is important to note that these values are not guaranteed to be + the exact time spent in each state. This is because of various + optimisation done in order to keep the overhead as small as possible. + </p> + + <p>Currently the following <c><anno>MSAcc_Thread_Type</anno></c> are available:</p> + <taglist> + <tag><c>scheduler</c></tag> + <item>The main execution threads that do most of the work.</item> + <tag><c>async</c></tag><item>Async threads are used by various + linked-in drivers (mainly the file drivers) do offload non-cpu + intensive work.</item> + <tag><c>aux</c></tag><item>Takes care of any work that is not + specifically assigned to a scheduler.</item> + </taglist> + <p>Currently the following <c><anno>MSAcc_Thread_State</anno></c>s are available. + All states are exclusive, meaning that a thread cannot be in two states + at once. So if you add the numbers of all counters in a thread + you will get the total run-time for that thread.</p> + <taglist> + <tag><c>aux</c></tag> + <item>Time spent handling auxiliary jobs.</item> + <tag><c>check_io</c></tag> + <item>Time spent checking for new I/O events.</item> + <tag><c>emulator</c></tag> + <item>Time spent executing erlang processes.</item> + <tag><c>gc</c></tag> + <item>Time spent doing garbage collection. When extra states are + enabled this is the time spent doing non-fullsweep garbage + collections.</item> + <tag><c>other</c></tag> + <item>Time spent doing unaccounted things.</item> + <tag><c>port</c></tag> + <item>Time spent executing ports.</item> + <tag><c>sleep</c></tag> + <item>Time spent sleeping.</item> + </taglist> + <p>It is possible to add more fine grained <c><anno>MSAcc_Thread_State</anno></c>s + through configure. + (e.g. <c>./configure --with-microstate-accounting=extra</c>). + Enabling these states will cause a performance degradation when + microstate accounting is turned off and increase the overhead when + it is turned on.</p> + <taglist> + <tag><c>alloc</c></tag> + <item>Time spent managing memory. Without extra states this time is + spread out over all other states.</item> + <tag><c>bif</c></tag> + <item>Time spent in bifs. Without extra states this time is part of + the <c>emulator</c> state.</item> + <tag><c>busy_wait</c></tag> + <item>Time spent busy waiting. This is also the state where a + scheduler no longer reports that it is active when using + <seealso marker="#statistics_scheduler_wall_time"> + <c>erlang:statistics(scheduler_wall_time)</c></seealso>. + So if you add all other states but this and sleep and then divide that + by all time in the thread you should get something very similar to the + scheduler_wall_time fraction. Without extra states this time is part + of the <c>other</c> state.</item> + <tag><c>ets</c></tag> + <item>Time spent executing ETS bifs. Without extra states this time is + part of the <c>emulator</c> state.</item> + <tag><c>gc_full</c></tag> + <item>Time spent doing fullsweep garbage collection. Without extra + states this time is part of the <c>gc</c> state.</item> + <tag><c>nif</c></tag> + <item>Time spent in nifs. Without extra states this time is part of + the <c>emulator</c> state.</item> + <tag><c>send</c></tag> + <item>Time spent sending messages (processes only). Without extra + states this time is part of the <c>emulator</c> state.</item> + <tag><c>timers</c></tag> + <item>Time spent managing timers. Without extra states this time is + part of the <c>other</c> state.</item> + </taglist> + <p>There is a utility module called + <seealso marker="runtime_tools:msacc"><c>msacc</c></seealso> in + runtime_tools that can be used to more easily analyse these + statistics.</p> + + <p> + Returns <c>undefined</c> if the system flag + <seealso marker="#system_flag_microstate_accounting"> + <c>microstate_accounting</c></seealso> + is turned off. + </p> + <p>The list of thread information is unsorted and may appear in + different order between calls.</p> + <note><p>The threads and states are subject to change without any + prior notice.</p></note> + </desc> + </func> + <func> + <name name="statistics" arity="1" clause_i="7"/> <fsummary>Information about reductions.</fsummary> <desc> <marker id="statistics_reductions"></marker> @@ -5773,7 +6072,7 @@ true</pre> </func> <func> - <name name="statistics" arity="1" clause_i="7"/> + <name name="statistics" arity="1" clause_i="8"/> <fsummary>Information about the run-queues.</fsummary> <desc><marker id="statistics_run_queue"></marker> <p> @@ -5789,7 +6088,7 @@ true</pre> </func> <func> - <name name="statistics" arity="1" clause_i="8"/> + <name name="statistics" arity="1" clause_i="9"/> <fsummary>Information about the run-queue lengths.</fsummary> <desc><marker id="statistics_run_queue_lengths"></marker> <p> @@ -5809,7 +6108,7 @@ true</pre> </func> <func> - <name name="statistics" arity="1" clause_i="9"/> + <name name="statistics" arity="1" clause_i="10"/> <fsummary>Information about runtime.</fsummary> <desc> <p>Returns information about runtime, in milliseconds.</p> @@ -5824,7 +6123,7 @@ true</pre> </func> <func> - <name name="statistics" arity="1" clause_i="10"/> + <name name="statistics" arity="1" clause_i="11"/> <fsummary>Information about each schedulers work time.</fsummary> <desc> <marker id="statistics_scheduler_wall_time"></marker> @@ -5895,7 +6194,7 @@ ok </func> <func> - <name name="statistics" arity="1" clause_i="11"/> + <name name="statistics" arity="1" clause_i="12"/> <fsummary>Information about active processes and ports.</fsummary> <desc><marker id="statistics_total_active_tasks"></marker> <p> @@ -5913,7 +6212,7 @@ ok </func> <func> - <name name="statistics" arity="1" clause_i="12"/> + <name name="statistics" arity="1" clause_i="13"/> <fsummary>Information about the run-queue lengths.</fsummary> <desc><marker id="statistics_total_run_queue_lengths"></marker> <p> @@ -5932,7 +6231,7 @@ ok </func> <func> - <name name="statistics" arity="1" clause_i="13"/> + <name name="statistics" arity="1" clause_i="14"/> <fsummary>Information about wall clock.</fsummary> <desc> <p>Returns information about wall clock. <c>wall_clock</c> can @@ -6166,6 +6465,17 @@ ok <func> <name name="system_flag" arity="2" clause_i="5"/> + <fsummary>Set system flag microstate_accounting</fsummary> + <desc><p><marker id="system_flag_microstate_accounting"></marker> + Turns on/off microstate accounting measurements. By passing reset it is possible to reset + all counters to 0.</p> + <p>For more information see, + <seealso marker="#statistics_microstate_accounting">erlang:statistics(microstate_accounting)</seealso>. + </p> + </desc> + </func> + <func> + <name name="system_flag" arity="2" clause_i="6"/> <fsummary>Sets system flag <c>min_heap_size</c>.</fsummary> <desc> <p>Sets the default minimum heap size for processes. The size @@ -6180,7 +6490,7 @@ ok </func> <func> - <name name="system_flag" arity="2" clause_i="6"/> + <name name="system_flag" arity="2" clause_i="7"/> <fsummary>Sets system flag <c>min_bin_vheap_size</c>.</fsummary> <desc> <p>Sets the default minimum binary virtual heap size for @@ -6197,45 +6507,57 @@ ok </func> <func> - <name name="system_flag" arity="2" clause_i="7"/> + <name name="system_flag" arity="2" clause_i="8"/> <fsummary>Sets system flag <c>multi_scheduling</c>.</fsummary> <desc> <p><marker id="system_flag_multi_scheduling"></marker> If multi-scheduling is enabled, more than one scheduler thread is used by the emulator. Multi-scheduling can be - blocked. When multi-scheduling is blocked, only - one scheduler thread schedules Erlang processes.</p> + blocked in two different ways. Either all schedulers but + one is blocked, or all <em>normal</em> schedulers but + one is blocked. When only normal schedulers are blocked + dirty schedulers are free to continue to schedule + processes.</p> <p>If <c><anno>BlockState</anno> =:= block</c>, multi-scheduling is - blocked. If <c><anno>BlockState</anno> =:= unblock</c> and no one + blocked. That is, one and only one scheduler thread will + execute. If <c><anno>BlockState</anno> =:= unblock</c> and no one else blocks multi-scheduling, and this process has blocked only once, multi-scheduling is unblocked.</p> - <p>One process can block multi-scheduling multiple times. - If a process has blocked multiple times, it must - unblock exactly as many times as it has blocked before it - has released its multi-scheduling block. If a process that - has blocked multi-scheduling exits, it releases its - blocking of multi-scheduling.</p> + <p>If <c><anno>BlockState</anno> =:= block_normal</c>, normal + multi-scheduling is blocked. That is, only one normal scheduler + thread will execute, but multiple dirty schedulers may execute. + If <c><anno>BlockState</anno> =:= unblock_normal</c> and no one + else blocks normal multi-scheduling, and this process has + blocked only once, normal multi-scheduling is unblocked.</p> + <p>One process can block multi-scheduling as well as normal + multi-scheduling multiple times. If a process has blocked + multiple times, it must unblock exactly as many times as it + has blocked before it has released its multi-scheduling + block. If a process that has blocked multi-scheduling or normal + multi scheduling exits, it automatically releases its blocking + of multi-scheduling and normal multi-scheduling.</p> <p>The return values are <c>disabled</c>, <c>blocked</c>, - or <c>enabled</c>. The returned value describes the - state just after the call to + <c>blocked_normal</c>, or <c>enabled</c>. The returned value + describes the state just after the call to <c>erlang:system_flag(multi_scheduling, <anno>BlockState</anno>)</c> has been made. For information about the return values, see <seealso marker="#system_info_multi_scheduling">erlang:system_info(multi_scheduling)</seealso>.</p> - <note><p>Blocking of multi-scheduling is normally not needed. - If you feel that you need to block multi-scheduling, - consider it a few more times again. Blocking multi-scheduling - is only to be used as a last resort, as it is most likely - a <em>very inefficient</em> way to solve the problem.</p> + <note><p>Blocking of multi-scheduling and normal multi-scheduling + is normally not needed. If you feel that you need to use these + features, consider it a few more times again. Blocking + multi-scheduling is only to be used as a last resort, as it is + most likely a <em>very inefficient</em> way to solve the problem.</p> </note> <p>See also <seealso marker="#system_info_multi_scheduling">erlang:system_info(multi_scheduling)</seealso>, + <seealso marker="#system_info_normal_multi_scheduling_blockers">erlang:system_info(normal_multi_scheduling_blockers)</seealso>, <seealso marker="#system_info_multi_scheduling_blockers">erlang:system_info(multi_scheduling_blockers)</seealso>, and <seealso marker="#system_info_schedulers">erlang:system_info(schedulers)</seealso>.</p> </desc> </func> <func> - <name name="system_flag" arity="2" clause_i="8"/> + <name name="system_flag" arity="2" clause_i="9"/> <fsummary>Sets system flag <c>scheduler_bind_type</c>.</fsummary> <type name="scheduler_bind_type"/> <desc> @@ -6353,7 +6675,7 @@ ok </func> <func> - <name name="system_flag" arity="2" clause_i="9"/> + <name name="system_flag" arity="2" clause_i="10"/> <fsummary>Sets system flag <c>scheduler_wall_time</c>.</fsummary> <desc><p><marker id="system_flag_scheduler_wall_time"></marker> Turns on or off scheduler wall time measurements.</p> @@ -6363,7 +6685,7 @@ ok </func> <func> - <name name="system_flag" arity="2" clause_i="10"/> + <name name="system_flag" arity="2" clause_i="11"/> <fsummary>Sets system flag <c>schedulers_online</c>.</fsummary> <desc> <p><marker id="system_flag_schedulers_online"></marker> @@ -6388,7 +6710,7 @@ ok </func> <func> - <name name="system_flag" arity="2" clause_i="11"/> + <name name="system_flag" arity="2" clause_i="12"/> <fsummary>Sets system flag <c>trace_control_word</c>.</fsummary> <desc> <p>Sets the value of the node trace control word to @@ -6727,6 +7049,7 @@ ok <name name="system_info" arity="1" clause_i="65"/> <name name="system_info" arity="1" clause_i="66"/> <name name="system_info" arity="1" clause_i="67"/> + <name name="system_info" arity="1" clause_i="68"/> <fsummary>Information about the system.</fsummary> <desc> <p>Returns various information about the current system @@ -7062,6 +7385,16 @@ ok where <c><anno>MinHeapSize</anno></c> is the current system-wide minimum heap size for spawned processes.</p> </item> + <tag><marker id="system_info_message_queue_data"><c>message_queue_data</c></marker></tag> + <item> + <p>Returns the default value of the <c>message_queue_data</c> + process flag which is either <c>off_heap</c>, <c>on_heap</c>, or <c>mixed</c>. + This default is set by the <c>erl</c> command line argument + <seealso marker="erl#+hmqd"><c>+hmqd</c></seealso>. For more information on the + <c>message_queue_data</c> process flag, see documentation of + <seealso marker="#process_flag_message_queue_data"><c>process_flag(message_queue_data, + MQD)</c></seealso>.</p> + </item> <tag><c>min_bin_vheap_size</c></tag> <item> <p>Returns <c>{min_bin_vheap_size, @@ -7081,7 +7414,8 @@ ok <tag><c>multi_scheduling</c></tag> <item> <marker id="system_info_multi_scheduling"></marker> - <p>Returns <c>disabled</c>, <c>blocked</c>, or <c>enabled</c>:</p> + <p>Returns <c>disabled</c>, <c>blocked</c>, <c>blocked_normal</c>, + or <c>enabled</c>:</p> <taglist> <tag><c>disabled</c></tag> <item> @@ -7092,14 +7426,22 @@ ok <tag><c>blocked</c></tag> <item> <p>The emulator has more than one scheduler thread, - but all scheduler threads except one are blocked, - that is, only one scheduler thread schedules + but all scheduler threads except one are blocked. + That is, only one scheduler thread schedules Erlang processes and executes Erlang code.</p> </item> + <tag><c>blocked_normal</c></tag> + <item> + <p>The emulator has more than one scheduler thread, + but all normal scheduler threads except one are + blocked. Note that dirty schedulers are not + blocked, and may schedule Erlang processes and + execute native code.</p> + </item> <tag><c>enabled</c></tag> <item> <p>The emulator has more than one scheduler thread, - and no scheduler threads are blocked, that is, + and no scheduler threads are blocked. That is, all available scheduler threads schedule Erlang processes and execute Erlang code.</p> </item> @@ -7107,6 +7449,7 @@ ok <p>See also <seealso marker="#system_flag_multi_scheduling">erlang:system_flag(multi_scheduling, BlockState)</seealso>, <seealso marker="#system_info_multi_scheduling_blockers">erlang:system_info(multi_scheduling_blockers)</seealso>, + <seealso marker="#system_info_normal_multi_scheduling_blockers">erlang:system_info(normal_multi_scheduling_blockers)</seealso>, and <seealso marker="#system_info_schedulers">erlang:system_info(schedulers)</seealso>.</p> </item> @@ -7123,6 +7466,8 @@ ok <p>See also <seealso marker="#system_flag_multi_scheduling">erlang:system_flag(multi_scheduling, BlockState)</seealso>, <seealso marker="#system_info_multi_scheduling">erlang:system_info(multi_scheduling)</seealso>, + <seealso marker="#system_info_normal_multi_scheduling_blockers">erlang:system_info(normal_multi_scheduling_blockers)</seealso>, + and <seealso marker="#system_info_schedulers">erlang:system_info(schedulers)</seealso>.</p> </item> @@ -7132,7 +7477,25 @@ ok used by the runtime system. It is on the form "<major ver>.<minor ver>".</p> </item> - <tag><c>otp_release</c></tag> + <tag><c>normal_multi_scheduling_blockers</c></tag> + <item> + <marker id="system_info_normal_multi_scheduling_blockers"></marker> + <p>Returns a list of <c><anno>Pid</anno></c>s when + normal multi-scheduling is blocked (i.e. all normal schedulers + but one is blocked), otherwise the empty list is returned. + The <c><anno>Pid</anno></c>s in the list represent all the + processes currently blocking normal multi-scheduling. + A <c><anno>Pid</anno></c> occurs only once in the list, even if + the corresponding process has blocked multiple times.</p> + <p>See also + <seealso marker="#system_flag_multi_scheduling">erlang:system_flag(multi_scheduling, BlockState)</seealso>, + <seealso marker="#system_info_multi_scheduling">erlang:system_info(multi_scheduling)</seealso>, + <seealso marker="#system_info_multi_scheduling_blockers">erlang:system_info(multi_scheduling_blockers)</seealso>, + + and + <seealso marker="#system_info_schedulers">erlang:system_info(schedulers)</seealso>.</p> + </item> + <tag><marker id="system_info_otp_release"><c>otp_release</c></marker></tag> <item> <marker id="system_info_otp_release"></marker> <p>Returns a string containing the OTP release number of the @@ -7373,6 +7736,7 @@ ok <seealso marker="#system_info_scheduler_id">erlang:system_info(scheduler_id)</seealso>, <seealso marker="#system_flag_multi_scheduling">erlang:system_flag(multi_scheduling, BlockState)</seealso>, <seealso marker="#system_info_multi_scheduling">erlang:system_info(multi_scheduling)</seealso>, + <seealso marker="#system_info_normal_multi_scheduling_blockers">erlang:system_info(normal_multi_scheduling_blockers)</seealso> and <seealso marker="#system_info_multi_scheduling_blockers">erlang:system_info(multi_scheduling_blockers)</seealso>.</p> </item> @@ -7604,7 +7968,7 @@ ok <c>stack_size</c>, <c>mbuf_size</c>, <c>old_heap_size</c>, and <c>old_heap_block_size</c>. These tuples are explained in the description of trace message - <seealso marker="#gc_start">gc_start</seealso> (see + <seealso marker="#gc_minor_start">gc_minor_start</seealso> (see <seealso marker="#trace/3">erlang:trace/3</seealso>). New tuples can be added, and the order of the tuples in the <c>Info</c> list can be changed at any time without @@ -8027,22 +8391,47 @@ timestamp() -> <c><anno>How</anno> == false</c>) the trace flags in <c><anno>FlagList</anno></c> for the process or processes represented by - <c><anno>PidSpec</anno></c>.</p> - <p><c><anno>PidSpec</anno></c> is either a process identifier - (pid) for a local process, or one of the following atoms:</p> + <c><anno>PidPortSpec</anno></c>.</p> + <p><c><anno>PidPortSpec</anno></c> is either a process identifier + (pid) for a local process, a port identifier, + or one of the following atoms:</p> <taglist> + <tag><c>all</c></tag> + <item> + <p>All currently existing processes and ports and all that + will be created in the future.</p> + </item> + <tag><c>processes</c></tag> + <item> + <p>All currently existing processes and all that will be created in the future.</p> + </item> + <tag><c>ports</c></tag> + <item> + <p>All currently existing ports and all that will be created in the future.</p> + </item> <tag><c>existing</c></tag> <item> + <p>All currently existing processes and ports.</p> + </item> + <tag><c>existing_processes</c></tag> + <item> <p>All currently existing processes.</p> </item> + <tag><c>existing_ports</c></tag> + <item> + <p>All currently existing ports.</p> + </item> <tag><c>new</c></tag> <item> - <p>All processes that are created in the future.</p> + <p>All processes and ports that will be created in the future.</p> </item> - <tag><c>all</c></tag> + <tag><c>new_processes</c></tag> + <item> + <p>All processes that will be created in the future.</p> + </item> + <tag><c>new_ports</c></tag> <item> - <p>All currently existing processes and all processes that - are created in the future.</p> + <p>All ports that will be created in the future.</p> </item> </taglist> <p><c><anno>FlagList</anno></c> can contain any number of the @@ -8051,35 +8440,28 @@ timestamp() -> <taglist> <tag><c>all</c></tag> <item> - <p>Sets all trace flags except <c>{tracer, Tracer}</c> and + <p>Sets all trace flags except <c>tracer</c> and <c>cpu_timestamp</c>, which are in their nature different than the others.</p> </item> <tag><c>send</c></tag> <item> <p>Traces sending of messages.</p> - <p>Message tags: <c>send</c> and - <c>send_to_non_existing_process</c>.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_send">send</seealso></c> and + <c><seealso marker="#trace_3_trace_messages_send_to_non_existing_process">send_to_non_existing_process</seealso></c>.</p> </item> <tag><c>'receive'</c></tag> <item> <p>Traces receiving of messages.</p> - <p>Message tags: <c>'receive'</c>.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_receive">'receive'</seealso></c>.</p> </item> - <tag><c>procs</c></tag> - <item> - <p>Traces process-related events.</p> - <p>Message tags: <c>spawn</c>, <c>exit</c>, - <c>register</c>, <c>unregister</c>, <c>link</c>, - <c>unlink</c>, <c>getting_linked</c>, and - <c>getting_unlinked</c>.</p> - </item> - <tag><c>call</c></tag> +<tag><c>call</c></tag> <item> <p>Traces certain function calls. Specify which function calls to trace by calling <seealso marker="#trace_pattern/3">erlang:trace_pattern/3</seealso>.</p> - <p>Message tags: <c>call</c> and <c>return_from</c>.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_call">call</seealso></c> and + <c><seealso marker="#trace_3_trace_messages_return_from">return_from</seealso></c>.</p> </item> <tag><c>silent</c></tag> <item> @@ -8097,8 +8479,9 @@ timestamp() -> specification function <c>{silent,Bool}</c>, giving a high degree of control of which functions with which arguments that trigger the trace.</p> - <p>Message tags: <c>call</c>, <c>return_from</c>, and - <c>return_to</c>. Or rather, the absence of.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_call">call</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_return_from">return_from</seealso></c>, and + <c><seealso marker="#trace_3_trace_messages_return_to">return_to</seealso></c>. Or rather, the absence of.</p> </item> <tag><c>return_to</c></tag> <item> @@ -8119,23 +8502,63 @@ timestamp() -> <p>To get trace messages containing return values from functions, use the <c>{return_trace}</c> match specification action instead.</p> - <p>Message tags: <c>return_to</c>.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_return_to">return_to</seealso></c>.</p> + </item> + <tag><c>procs</c></tag> + <item> + <p>Traces process-related events.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_spawn">spawn</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_spawned">spawned</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_exit">exit</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_register">register</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_unregister">unregister</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_link">link</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_unlink">unlink</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_getting_linked">getting_linked</seealso></c>, and + <c><seealso marker="#trace_3_trace_messages_getting_unlinked">getting_unlinked</seealso></c>.</p> + </item> + <tag><c>ports</c></tag> + <item> + <p>Traces port-related events.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_open">open</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_closed">closed</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_register">register</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_unregister">unregister</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_getting_linked">getting_linked</seealso></c>, and + <c><seealso marker="#trace_3_trace_messages_getting_unlinked">getting_unlinked</seealso></c>.</p> </item> <tag><c>running</c></tag> <item> <p>Traces scheduling of processes.</p> - <p>Message tags: <c>in</c> and <c>out</c>.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_in_proc">in</seealso></c> and + <c><seealso marker="#trace_3_trace_messages_out_proc">out</seealso></c>.</p> </item> <tag><c>exiting</c></tag> <item> <p>Traces scheduling of exiting processes.</p> - <p>Message tags: <c>in_exiting</c>, <c>out_exiting</c>, and - <c>out_exited</c>.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_in_exiting_proc">in_exiting</seealso></c>, + <c><seealso marker="#trace_3_trace_messages_out_exiting_proc">out_exiting</seealso></c>, and + <c><seealso marker="#trace_3_trace_messages_out_exited_proc">out_exited</seealso></c>.</p> + </item> + <tag><c>running_procs</c></tag> + <item> + <p>Traces scheduling of processes just like <c>running</c>. + However this option also includes schedule events when the + process executes within the context of a port without + being scheduled out itself.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_in_proc">in</seealso></c> and + <c><seealso marker="#trace_3_trace_messages_out_proc">out</seealso></c>.</p> + </item> + <tag><c>running_ports</c></tag> + <item> + <p>Traces scheduling of ports.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_in_port">in</seealso></c> and + <c><seealso marker="#trace_3_trace_messages_out_port">out</seealso></c>.</p> </item> <tag><c>garbage_collection</c></tag> <item> <p>Traces garbage collections of processes.</p> - <p>Message tags: <c>gc_start</c> and <c>gc_end</c>.</p> + <p>Message tags: <c><seealso marker="#trace_3_trace_messages_gc_minor_start">gc_minor_start</seealso></c> and <c><seealso marker="#trace_3_trace_messages_gc_minor_end">gc_minor_end</seealso></c>.</p> </item> <tag><c>timestamp</c></tag> <item> @@ -8150,8 +8573,8 @@ timestamp() -> in CPU time, not wall clock time. That is, <c>cpu_timestamp</c> will not be used if <c>monotonic_timestamp</c>, or <c>strict_monotonic_timestamp</c> is enabled. - Only allowed with <c>PidSpec==all</c>. If the host - machine OS does not support high-resolution + Only allowed with <c><anno>PidPortSpec</anno>==all</c>. If the + host machine OS does not support high-resolution CPU time measurements, <c>trace/3</c> exits with <c>badarg</c>. Notice that most OS do not synchronize this value across cores, so be prepared @@ -8163,8 +8586,8 @@ timestamp() -> <seealso marker="time_correction#Erlang_Monotonic_Time">Erlang monotonic time</seealso> time-stamp in all trace messages. The time-stamp (Ts) has the same format and value as produced by - <c>erlang:monotonic_time(nano_seconds)</c>. This flag overrides - the <c>cpu_timestamp</c> flag.</p> + <c><seealso marker="#monotonic_time-1">erlang:monotonic_time(nano_seconds)</seealso></c>. + This flag overrides the <c>cpu_timestamp</c> flag.</p> </item> <tag><c>strict_monotonic_timestamp</c></tag> <item> @@ -8173,9 +8596,9 @@ timestamp() -> monotonic time</seealso> and a monotonically increasing integer in all trace messages. The time-stamp (Ts) has the same format and value as produced by - <c>{erlang:monotonic_time(nano_seconds), - erlang:unique_integer([monotonic])}</c>. This flag overrides - the <c>cpu_timestamp</c> flag.</p> + <c>{<seealso marker="#monotonic_time-1">erlang:monotonic_time(nano_seconds)</seealso>, + <seealso marker="#unique_integer-1">erlang:unique_integer([monotonic])</seealso>}</c>. + This flag overrides the <c>cpu_timestamp</c> flag.</p> </item> <tag><c>arity</c></tag> <item> @@ -8209,12 +8632,20 @@ timestamp() -> <item> <p>Specifies where to send the trace messages. <c>Tracer</c> must be the process identifier of a local process - or the port identifier - of a local port. If this flag is not given, trace - messages are sent to the process that called - <c>erlang:trace/3</c>.</p> + or the port identifier of a local port.</p> + </item> + <tag><c>{tracer, TracerModule, TracerState}</c></tag> + <item> + <p>Specifies that a tracer module should be called + instead of sending a trace message. The tracer module + can then ignore or change the trace message. For more details + on how to write a tracer module see + <seealso marker="erts:erl_tracer"><c>erl_tracer</c></seealso> + </p> </item> </taglist> + <p>If no <c>tracer</c> is given, the calling process + will be receiving all of the trace messages</p> <p>The effect of combining <c>set_on_first_link</c> with <c>set_on_link</c> is the same as having <c>set_on_first_link</c> alone. Likewise for @@ -8235,21 +8666,36 @@ timestamp() -> the other one will become active.</p> <marker id="trace_3_trace_messages"></marker> <taglist> - <tag><c>{trace, Pid, 'receive', Msg}</c></tag> + <tag> + <marker id="trace_3_trace_messages_send"></marker> + <c>{trace, PidPort, send, Msg, To}</c> + </tag> <item> - <p>When <c>Pid</c> receives message <c>Msg</c>.</p> - </item> - <tag><c>{trace, Pid, send, Msg, To}</c></tag> - <item> - <p>When <c>Pid</c> sends message <c>Msg</c> to + <p>When <c>PidPort</c> sends message <c>Msg</c> to process <c>To</c>.</p> </item> - <tag><c>{trace, Pid, send_to_non_existing_process, Msg, To}</c></tag> + <tag> + <marker id="trace_3_trace_messages_send_to_non_existing_process"></marker> + <c>{trace, PidPort, send_to_non_existing_process, Msg, To}</c> + </tag> <item> - <p>When <c>Pid</c> sends message <c>Msg</c> to + <p>When <c>PidPort</c> sends message <c>Msg</c> to the non-existing process <c>To</c>.</p> </item> - <tag><c>{trace, Pid, call, {M, F, Args}}</c></tag> + <tag> + <marker id="trace_3_trace_messages_receive"></marker> + <c>{trace, PidPort, 'receive', Msg}</c> + </tag> + <item> + <p>When <c>PidPort</c> receives message <c>Msg</c>. + If <c>Msg</c> is set to timeout, then a receive + statement may have timedout, or the process received + a message with the payload <c>timeout</c>.</p> + </item> + <tag> + <marker id="trace_3_trace_messages_call"></marker> + <c>{trace, Pid, call, {M, F, Args}}</c> + </tag> <item> <p>When <c>Pid</c> calls a traced function. The return values of calls are never supplied, only the call and its @@ -8258,7 +8704,10 @@ timestamp() -> change the contents of this message, so that <c>Arity</c> is specified instead of <c>Args</c>.</p> </item> - <tag><c>{trace, Pid, return_to, {M, F, Arity}}</c></tag> + <tag> + <marker id="trace_3_trace_messages_return_to"></marker> + <c>{trace, Pid, return_to, {M, F, Arity}}</c> + </tag> <item> <p>When <c>Pid</c> returns <em>to</em> the specified function. This trace message is sent if both @@ -8270,76 +8719,175 @@ timestamp() -> (that is, the functions match specification matched, and <c>{message, false}</c> was not an action).</p> </item> - <tag><c>{trace, Pid, return_from, {M, F, Arity}, ReturnValue}</c></tag> + <tag> + <marker id="trace_3_trace_messages_return_from"></marker> + <c>{trace, Pid, return_from, {M, F, Arity}, ReturnValue}</c> + </tag> <item> <p>When <c>Pid</c> returns <em>from</em> the specified function. This trace message is sent if flag <c>call</c> is set, and the function has a match specification with a <c>return_trace</c> or <c>exception_trace</c> action.</p> </item> - <tag><c>{trace, Pid, exception_from, {M, F, Arity}, {Class, Value}}</c></tag> + <tag> + <marker id="trace_3_trace_messages_exception_from"></marker> + <c>{trace, Pid, exception_from, {M, F, Arity}, {Class, Value}}</c> + </tag> <item> <p>When <c>Pid</c> exits <em>from</em> the specified function because of an exception. This trace message is sent if flag <c>call</c> is set, and the function has a match specification with an <c>exception_trace</c> action.</p> </item> - <tag><c>{trace, Pid, spawn, Pid2, {M, F, Args}}</c></tag> + <tag> + <marker id="trace_3_trace_messages_spawn"></marker> + <c>{trace, Pid, spawn, Pid2, {M, F, Args}}</c> + </tag> <item> <p>When <c>Pid</c> spawns a new process <c>Pid2</c> with the specified function call as entry point.</p> <p><c>Args</c> is supposed to be the argument list, but can be any term if the spawn is erroneous.</p> </item> - <tag><c>{trace, Pid, exit, Reason}</c></tag> + <tag> + <marker id="trace_3_trace_messages_spawned"></marker> + <c>{trace, Pid, spawned, Pid2, {M, F, Args}}</c> + </tag> + <item> + <p>When <c>Pid</c> is spawned by process <c>Pid2</c> with + the specified function call as entry point.</p> + <p><c>Args</c> is supposed to be the argument list, + but can be any term if the spawn is erroneous.</p> + </item> + <tag> + <marker id="trace_3_trace_messages_exit"></marker> + <c>{trace, Pid, exit, Reason}</c> + </tag> <item> <p>When <c>Pid</c> exits with reason <c>Reason</c>.</p> </item> - <tag><c>{trace, Pid, link, Pid2}</c></tag> + <tag> + <marker id="trace_3_trace_messages_register"></marker> + <c>{trace, PidPort, register, RegName}</c> + </tag> + <item> + <p>When <c>PidPort</c> gets the name <c>RegName</c> registered.</p> + </item> + <tag> + <marker id="trace_3_trace_messages_unregister"></marker> + <c>{trace, PidPort, unregister, RegName}</c> + </tag> + <item> + <p>When <c>PidPort</c> gets the name <c>RegName</c> unregistered. + This is done automatically when a registered + process or port exits.</p> + </item> + <tag> + <marker id="trace_3_trace_messages_link"></marker> + <c>{trace, Pid, link, Pid2}</c> + </tag> <item> <p>When <c>Pid</c> links to a process <c>Pid2</c>.</p> </item> - <tag><c>{trace, Pid, unlink, Pid2}</c></tag> + <tag> + <marker id="trace_3_trace_messages_unlink"></marker> + <c>{trace, Pid, unlink, Pid2}</c> + </tag> <item> <p>When <c>Pid</c> removes the link from a process <c>Pid2</c>.</p> </item> - <tag><c>{trace, Pid, getting_linked, Pid2}</c></tag> + <tag> + <marker id="trace_3_trace_messages_getting_linked"></marker> + <c>{trace, PidPort, getting_linked, Pid2}</c> + </tag> <item> - <p>When <c>Pid</c> gets linked to a process <c>Pid2</c>.</p> + <p>When <c>PidPort</c> gets linked to a process <c>Pid2</c>.</p> </item> - <tag><c>{trace, Pid, getting_unlinked, Pid2}</c></tag> + <tag> + <marker id="trace_3_trace_messages_getting_unlinked"></marker> + <c>{trace, PidPort, getting_unlinked, Pid2}</c> + </tag> <item> - <p>When <c>Pid</c> gets unlinked from a process <c>Pid2</c>.</p> + <p>When <c>PidPort</c> gets unlinked from a process <c>Pid2</c>.</p> </item> - <tag><c>{trace, Pid, register, RegName}</c></tag> + <tag> + <marker id="trace_3_trace_messages_exit"></marker> + <c>{trace, Pid, exit, Reason}</c> + </tag> <item> - <p>When <c>Pid</c> gets the name <c>RegName</c> registered.</p> + <p>When <c>Pid</c> exits with reason <c>Reason</c>.</p> </item> - <tag><c>{trace, Pid, unregister, RegName}</c></tag> + <tag> + <marker id="trace_3_trace_messages_open"></marker> + <c>{trace, Port, open, Pid, Driver}</c> + </tag> <item> - <p>When <c>Pid</c> gets the name <c>RegName</c> unregistered. - This is done automatically when a registered - process exits.</p> + <p>When <c>Pid</c> opens a new port <c>Port</c> with + the running the <c>Driver</c>.</p> + <p><c>Driver</c> is the name of the driver as an atom.</p> </item> - <tag><c>{trace, Pid, in, {M, F, Arity} | 0}</c></tag> + <tag> + <marker id="trace_3_trace_messages_closed"></marker> + <c>{trace, Port, closed, Reason}</c> + </tag> + <item> + <p>When <c>Port</c> closed with <c>Reason</c>.</p> + </item> + <tag> + <marker id="trace_3_trace_messages_in_proc"></marker> + <marker id="trace_3_trace_messages_in_exiting_proc"></marker> + <c>{trace, Pid, in | in_exiting, {M, F, Arity} | 0}</c> + </tag> <item> <p>When <c>Pid</c> is scheduled to run. The process runs in function <c>{M, F, Arity}</c>. On some rare occasions, the current function cannot be determined, then the last element is <c>0</c>.</p> </item> - <tag><c>{trace, Pid, out, {M, F, Arity} | 0}</c></tag> + <tag> + <marker id="trace_3_trace_messages_out_proc"></marker> + <marker id="trace_3_trace_messages_out_exiting_proc"></marker> + <marker id="trace_3_trace_messages_out_exited_proc"></marker> + <c>{trace, Pid, out | out_exiting | out_exited, {M, F, Arity} | 0}</c> + </tag> <item> <p>When <c>Pid</c> is scheduled out. The process was running in function {M, F, Arity}. On some rare occasions, the current function cannot be determined, then the last element is <c>0</c>.</p> </item> - <tag><c>{trace, Pid, gc_start, Info}</c></tag> + <tag> + <marker id="trace_3_trace_messages_in_port"></marker> + <c>{trace, Port, in, Command | 0}</c> + </tag> + <item> + <p>When <c>Port</c> is scheduled to run. <c>Command</c> is the + first thing the port will execute, it may however run several + commands before being scheduled out. On some rare + occasions, the current function cannot be determined, + then the last element is <c>0</c>.</p> + <p>The possible commands are: <c>call | close | command | connect | control | flush | info | link | open | unlink</c></p> + </item> + <tag> + <marker id="trace_3_trace_messages_out_port"></marker> + <c>{trace, Port, out, Command | 0}</c> + </tag> + <item> + <p>When <c>Port</c> is scheduled out. The last command run + was <c>Command</c>. On some rare occasions, + the current function cannot be determined, then the last + element is <c>0</c>. <c>Command</c> can contain the same + commands as <c>in</c> + </p> + </item> + <tag> + <marker id="trace_3_trace_messages_gc_minor_start"></marker> + <c>{trace, Pid, gc_minor_start, Info}</c> + </tag> <item> - <marker id="gc_start"></marker> - <p>Sent when garbage collection is about to be started. + <marker id="gc_minor_start"></marker> + <p>Sent when a young garbage collection is about to be started. <c>Info</c> is a list of two-element tuples, where the first element is a key, and the second is the value. Do not depend on any order of the tuples. @@ -8378,26 +8926,46 @@ timestamp() -> </taglist> <p>All sizes are in words.</p> </item> - <tag><c>{trace, Pid, gc_end, Info}</c></tag> + <tag> + <marker id="trace_3_trace_messages_gc_minor_end"></marker> + <c>{trace, Pid, gc_minor_end, Info}</c> + </tag> <item> - <p>Sent when garbage collection is finished. <c>Info</c> - contains the same kind of list as in message <c>gc_start</c>, + <p>Sent when young garbage collection is finished. <c>Info</c> + contains the same kind of list as in message <c>gc_minor_start</c>, but the sizes reflect the new sizes after garbage collection.</p> </item> + <tag> + <marker id="trace_3_trace_messages_gc_major_start"></marker> + <c>{trace, Pid, gc_major_start, Info}</c> + </tag> + <item> + <p>Sent when fullsweep garbage collection is about to be started. <c>Info</c> + contains the same kind of list as in message <c>gc_minor_start</c>.</p> + </item> + <tag> + <marker id="trace_3_trace_messages_gc_major_end"></marker> + <c>{trace, Pid, gc_major_end, Info}</c> + </tag> + <item> + <p>Sent when fullsweep garbage collection is finished. <c>Info</c> + contains the same kind of list as in message <c>gc_minor_start</c> + but the sizes reflect the new sizes after a fullsweep garbage collection.</p> + </item> </taglist> - <p>If the tracing process dies, the flags are silently - removed.</p> - <p>Only one process can trace a particular process. Therefore, + <p>If the tracing process/port dies or the tracer module returns + <c>remove</c>, the flags are silently removed.</p> + <p>Each process can only be traced by one tracer. Therefore, attempts to trace an already traced process fail.</p> <p>Returns: A number indicating the number of processes that - matched <c><anno>PidSpec</anno></c>. - If <c><anno>PidSpec</anno></c> is a process + matched <c><anno>PidPortSpec</anno></c>. + If <c><anno>PidPortSpec</anno></c> is a process identifier, the return value is <c>1</c>. - If <c><anno>PidSpec</anno></c> + If <c><anno>PidPortSpec</anno></c> is <c>all</c> or <c>existing</c>, the return value is - the number of processes running, excluding tracer processes. - If <c><anno>PidSpec</anno></c> is <c>new</c>, the return value is + the number of processes running. + If <c><anno>PidPortSpec</anno></c> is <c>new</c>, the return value is <c>0</c>.</p> <p>Failure: <c>badarg</c> if the specified arguments are not supported. For example, <c>cpu_timestamp</c> is not @@ -8409,7 +8977,11 @@ timestamp() -> <name name="trace_delivered" arity="1"/> <fsummary>Notification when trace has been delivered.</fsummary> <desc> - <p>The delivery of trace messages is dislocated on the time-line + <p>The delivery of trace messages (generated by + <seealso marker="#trace/3"><c>erlang:trace/3</c></seealso>, + <seealso marker="kernel:seq_trace"><c>seq_trace</c></seealso> or + <seealso marker="#system_profile/2"><c>erlang:system_profile/2</c></seealso>) + is dislocated on the time-line compared to other events in the system. If you know that <c><anno>Tracee</anno></c> has passed some specific point in its execution, @@ -8430,13 +9002,16 @@ timestamp() -> has not been traced by someone, but if this is the case, <em>no</em> trace messages have been delivered when the <c>trace_delivered</c> message arrives.</p> - <p>Notice that that <c><anno>Tracee</anno></c> must refer + <p>Notice that <c><anno>Tracee</anno></c> must refer to a process currently, or previously existing on the same node as the caller of <c>erlang:trace_delivered(<anno>Tracee</anno>)</c> resides on. The special <c><anno>Tracee</anno></c> atom <c>all</c> - denotes all processes - that currently are traced in the node.</p> + denotes all processes that currently are traced in the node.</p> + <p>When used together with an <seealso marker="erts:erl_tracer"> + Tracer Module</seealso> any message sent in the trace callback + is guaranteed to have reached it's recipient before the + <c>trace_delivered</c> message is sent.</p> <p>Example: Process <c>A</c> is <c><anno>Tracee</anno></c>, port <c>B</c> is tracer, and process <c>C</c> is the port owner of <c>B</c>. <c>C</c> wants to close <c>B</c> when @@ -8459,12 +9034,15 @@ timestamp() -> <type name="trace_info_flag"/> <type name="trace_match_spec"/> <desc> - <p>Returns trace information about a process or function.</p> - <p>To get information about a process, - <c><anno>PidOrFunc</anno></c> is to - be a process identifier (pid) or the atom <c>new</c>. - The atom <c>new</c> means that the default trace state for - processes to be created is returned.</p> + <p>Returns trace information about a port, process or function.</p> + <p>To get information about a port or process, + <c><anno>PidPortOrFunc</anno></c> is to + be a process identifier (pid), port identifier or one of + the atoms <c>new</c>, <c>new_processes</c>, <c>new_ports</c>. + The atom <c>new</c> or <c>new_processes</c> means that the default trace + state for processes to be created is returned. The atom <c>new_ports</c> + means that the default trace state for ports to be created is returned. + </p> <p>The following <c>Item</c>s are valid:</p> <taglist> <tag><c>flags</c></tag> @@ -8474,19 +9052,22 @@ timestamp() -> traces are enabled, and one or more of the followings atoms if traces are enabled: <c>send</c>, <c>'receive'</c>, <c>set_on_spawn</c>, <c>call</c>, - <c>return_to</c>, <c>procs</c>, <c>set_on_first_spawn</c>, - <c>set_on_link</c>, <c>running</c>, + <c>return_to</c>, <c>procs</c>, <c>ports</c>, <c>set_on_first_spawn</c>, + <c>set_on_link</c>, <c>running</c>, <c>running_procs</c>, + <c>running_ports</c>, <c>silent</c>, <c>exiting</c> + <c>monotonic_timestamp</c>, <c>strict_monotonic_timestamp</c>, <c>garbage_collection</c>, <c>timestamp</c>, and <c>arity</c>. The order is arbitrary.</p> </item> <tag><c>tracer</c></tag> <item> - <p>Returns the identifier for process or port tracing this + <p>Returns the identifier for process, port or a tuple containing + the tracer module and tracer state tracing this process. If this process is not being traced, the return value is <c>[]</c>.</p> </item> </taglist> - <p>To get information about a function, <c>PidOrFunc</c> is to + <p>To get information about a function, <c><anno>PidPortOrFunc</anno></c> is to be the three-element tuple <c>{Module, Function, Arity}</c> or the atom <c>on_load</c>. No wild cards are allowed. Returns <c>undefined</c> if the function does not exist, or @@ -8510,8 +9091,8 @@ timestamp() -> </item> <tag><c>meta</c></tag> <item> - <p>Returns the meta-trace tracer process or port for this - function, if it has one. If the function is not + <p>Returns the meta-trace tracer process, port or trace module + for this function, if it has one. If the function is not meta-traced, the returned value is <c>false</c>. If the function is meta-traced but has once detected that the tracer process is invalid, the returned value is [].</p> @@ -8554,7 +9135,7 @@ timestamp() -> <c>Value</c> is the requested information as described earlier. If a pid for a dead process was given, or the name of a non-existing function, <c>Value</c> is <c>undefined</c>.</p> - <p>If <c><anno>PidOrFunc</anno></c> is <c>on_load</c>, the information + <p>If <c><anno>PidPortOrFunc</anno></c> is <c>on_load</c>, the information returned refers to the default value for code that will be loaded.</p> </desc> @@ -8679,13 +9260,12 @@ timestamp() -> the process, a <c>return_to</c> message is also sent when this function returns to its caller.</p> </item> - <tag><c>meta | {meta, <anno>Pid</anno>}</c></tag> + <tag><c>meta | {meta, <anno>Pid</anno>} | {meta, <anno>TracerModule</anno>, <anno>TracerState</anno>}</c> + </tag> <item> <p>Turns on or off meta-tracing for all types of function - calls. Trace messages are sent to the tracer process - or port <c><anno>Pid</anno></c> whenever any of the specified - functions are called, regardless of how they are called. - If no <c><anno>Pid</anno></c> is specified, + calls. Trace messages are sent to the tracer whenever any of + the specified functions are called. If no tracer is specified, <c>self()</c> is used as a default tracer process.</p> <p>Meta-tracing traces all processes and does not care about the process trace flags set by <c>trace/3</c>, @@ -8693,7 +9273,7 @@ timestamp() -> <c>[call, timestamp]</c>.</p> <p>The match specification function <c>{return_trace}</c> works with meta-trace and sends its trace message to the - same tracer process.</p> + same tracer.</p> </item> <tag><c>call_count</c></tag> <item> |