aboutsummaryrefslogtreecommitdiffstats
path: root/erts/doc/src/start_erl.xml
diff options
context:
space:
mode:
Diffstat (limited to 'erts/doc/src/start_erl.xml')
-rw-r--r--erts/doc/src/start_erl.xml224
1 files changed, 125 insertions, 99 deletions
diff --git a/erts/doc/src/start_erl.xml b/erts/doc/src/start_erl.xml
index fe808f7737..4887d4606e 100644
--- a/erts/doc/src/start_erl.xml
+++ b/erts/doc/src/start_erl.xml
@@ -4,20 +4,21 @@
<comref>
<header>
<copyright>
- <year>1998</year><year>2013</year>
+ <year>1998</year><year>2016</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
- The contents of this file are subject to the Erlang Public License,
- Version 1.1, (the "License"); you may not use this file except in
- compliance with the License. You should have received a copy of the
- Erlang Public License along with this software. If not, it can be
- retrieved online at http://www.erlang.org/.
-
- Software distributed under the License is distributed on an "AS IS"
- basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
- the License for the specific language governing rights and limitations
- under the License.
+ Licensed under the Apache License, Version 2.0 (the "License");
+ you may not use this file except in compliance with the License.
+ You may obtain a copy of the License at
+
+ http://www.apache.org/licenses/LICENSE-2.0
+
+ Unless required by applicable law or agreed to in writing, software
+ distributed under the License is distributed on an "AS IS" BASIS,
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ See the License for the specific language governing permissions and
+ limitations under the License.
</legalnotice>
@@ -27,117 +28,142 @@
<docno></docno>
<approved></approved>
<checked></checked>
- <date>98-08-05</date>
+ <date>1998-08-05</date>
<rev></rev>
<file>start_erl.xml</file>
</header>
<com>start_erl</com>
- <comsummary>Start Erlang for embedded systems on Windows NT&reg;</comsummary>
+ <comsummary>Start Erlang for embedded systems on Windows systems.</comsummary>
<description>
- <p>This describes the <c><![CDATA[start_erl]]></c> program specific to Windows
- NT. Although there exists programs with the same name on other
- platforms, their functionality is not the same.</p>
- <p>The <c><![CDATA[start_erl]]></c> program is distributed both in compiled
+ <p>The <c><![CDATA[start_erl]]></c> program is specific to
+ Windows NT/2000/XP (and later versions of Windows).
+ Although there are programs with the same name on other
+ platforms, their functionality is different.</p>
+
+ <p>This program is distributed both in compiled
form (under &lt;Erlang root&gt;\\erts-&lt;version&gt;\\bin) and
- in source form (under &lt;Erlang
- root&gt;\\erts-&lt;version&gt;\\src).
- The purpose of the source code is to make it possible to easily
- customize the program for local needs, such as cyclic restart
- detection etc. There is also a "make"-file, written for the
- <c><![CDATA[nmake]]></c> program distributed with Microsoft&reg; Visual
- C++&reg;. The program can however be compiled with
- any Win32 C compiler (possibly with slight modifications).</p>
- <p>The purpose of the program is to aid release handling on
- Windows NT&reg;. The program should be called by the
+ in source form (under &lt;Erlang root&gt;\\erts-&lt;version&gt;\\src).
+ The purpose of the source code is to ease customization of the
+ program for local needs, such as cyclic restart
+ detection. There is also a "make"-file, written for the
+ <c><![CDATA[nmake]]></c> program distributed with Microsoft Visual
+ C++. This program can, however, be compiled with
+ any Win32 C compiler (possibly with minor modifications).</p>
+
+ <p>This program aids release handling on Windows systems.
+ The program is to be called by the
<c><![CDATA[erlsrv]]></c> program, read up the release data file
- start_erl.data and start Erlang. Certain options to start_erl
- are added and removed by the release handler during upgrade with
- emulator restart (more specifically the <c><![CDATA[-data]]></c> option).</p>
+ <c>start_erl.data</c>, and start Erlang. Some options to
+ <c>start_erl</c> are added and removed by the release handler
+ during upgrade with emulator restart (more specifically option
+ <c><![CDATA[-data]]></c>).</p>
</description>
+
<funcs>
<func>
<name>start_erl [&lt;erl options>] ++ [&lt;start_erl options>]</name>
- <fsummary>Start the Erlang emulator with the correct release data</fsummary>
+ <fsummary>Start the Erlang emulator with the correct release data.
+ </fsummary>
<desc>
- <p>The <c><![CDATA[start_erl]]></c> program in its original form
+ <p>The <c><![CDATA[start_erl]]></c> program in its original form
recognizes the following options:</p>
<taglist>
- <tag>++</tag>
- <item>Mandatory, delimits start_erl options from normal Erlang
- options. Everything on the command line <em>before</em> the
- <c><![CDATA[++]]></c> is interpreted as options to be sent to the
- <c><![CDATA[erl]]></c> program. Everything <em>after</em><c><![CDATA[++]]></c> is
- interpreted as options to <c><![CDATA[start_erl]]></c> itself.</item>
- <tag>-reldir &lt;release root&gt;</tag>
-
- <item>Mandatory if the environment variable
- <c><![CDATA[RELDIR]]></c> is not specified and no
- <c>-rootdir</c> option is given. Tells start_erl where the
- root of the release tree is placed in the file-system (typically
- &lt;Erlang root&gt;\\releases). The
- <c><![CDATA[start_erl.data]]></c> file is expected to be
- placed in this directory (if not otherwise specified). If
- only the <c>-rootdir</c> option is given, the directory is
- assumed to be &lt;Erlang root&gt;\\releases.</item>
-
- <tag>-rootdir &lt;Erlang root directory&gt;</tag>
-
- <item>Mandatory if <c>-reldir</c> is not given and there is
- no <c><![CDATA[RELDIR]]></c> in the environment. This
- specifies the Erlang installation root directory (under
- which the <c>lib</c>, <c>releases</c> and
- <c>erts-&lt;Version&gt;</c> directories are placed). If only
- <c>-reldir</c> (or the environment variable
- <c><![CDATA[RELDIR]]></c>) is given, the Erlang root is assumed to
- be the directory exactly one level above the release
- directory.</item>
-
- <tag>-data &lt;data file name&gt;</tag>
- <item>Optional, specifies another data file than start_erl.data
- in the &lt;release root&gt;. It is specified relative to the
- &lt;release root&gt; or absolute (including drive letter
- etc.). This option is used by the release handler during
- upgrade and should not be used during normal
- operation. The release data file should not normally be
- named differently.</item>
- <tag>-bootflags &lt;boot flags file name&gt;</tag>
- <item>Optional, specifies a file name relative to actual release
- directory (that is the subdirectory of &lt;release
- root&gt; where the <c><![CDATA[.boot]]></c> file etc. are placed).
- The contents of this file is appended to the command line
- when Erlang is started. This makes it easy to start the
- emulator with different options for different releases.</item>
+ <tag><c>++</c></tag>
+ <item>
+ <p>Mandatory. Delimits <c>start_erl</c> options from normal Erlang
+ options. Everything on the command line <em>before</em>
+ <c><![CDATA[++]]></c> is interpreted as options to be sent to the
+ <c><![CDATA[erl]]></c> program. Everything <em>after</em>
+ <c><![CDATA[++]]></c> is interpreted as options to
+ <c><![CDATA[start_erl]]></c> itself.</p>
+ </item>
+ <tag><c>-reldir &lt;release root&gt;</c></tag>
+ <item>
+ <p>Mandatory if environment variable
+ <c><![CDATA[RELDIR]]></c> is not specified and no
+ <c>-rootdir</c> option is specified. Tells <c>start_erl</c> where
+ the root of the release tree is located in the file system
+ (typically &lt;Erlang root&gt;\\releases). The
+ <c><![CDATA[start_erl.data]]></c> file is expected to be
+ located in this directory (unless otherwise specified). If
+ only option <c>-rootdir</c> is specified, the directory is
+ assumed to be &lt;Erlang root&gt;\\releases.</p>
+ </item>
+ <tag><c>-rootdir &lt;Erlang root directory&gt;</c></tag>
+ <item>
+ <p>Mandatory if <c>-reldir</c> is not specified and no
+ <c><![CDATA[RELDIR]]></c> exists in the environment. This
+ specifies the Erlang installation root directory (under
+ which the <c>lib</c>, <c>releases</c>, and
+ <c>erts-&lt;Version&gt;</c> directories are located). If only
+ <c>-reldir</c> (or environment variable <c><![CDATA[RELDIR]]></c>)
+ is specified, the Erlang root is assumed to
+ be the directory exactly one level above the release
+ directory.</p>
+ </item>
+ <tag><c>-data &lt;data file name&gt;</c></tag>
+ <item>
+ <p>Optional. Specifies another data file than <c>start_erl.data</c>
+ in the &lt;release root&gt;. It is specified relative to the
+ &lt;release root&gt; or absolute (including drive letter, and so
+ on). This option is used by the release handler during
+ upgrade and is not to be used during normal
+ operation. Normally the release data file is not to be
+ named differently.</p>
+ </item>
+ <tag><c>-bootflags &lt;boot flags file name&gt;</c></tag>
+ <item>
+ <p>Optional. Specifies a file name relative to the release
+ directory (that is, the subdirectory of &lt;release root&gt;
+ where the <c><![CDATA[.boot]]></c> file and others are located).
+ The contents of this file is appended to the command line
+ when Erlang is started. This makes it easy to start the
+ emulator with different options for different releases.</p>
+ </item>
</taglist>
</desc>
</func>
</funcs>
<section>
- <title>NOTES</title>
- <p>As the source code is distributed, it can easily be modified to
- accept other options. The program must still accept the
- <c><![CDATA[-data]]></c> option with the semantics described above for the
- release handler to work correctly.</p>
- <p>The Erlang emulator is found by examining the registry keys for
- the emulator version specified in the release data file. The new
- emulator needs to be properly installed before the upgrade for
- this to work.</p>
- <p>Although the program is located together with files specific to
- emulator version, it is not expected to be specific to the
- emulator version. The release handler does <em>not</em> change the
- <c><![CDATA[-machine]]></c> option to <c><![CDATA[erlsrv]]></c> during emulator restart.
- Place the (possibly customized) <c><![CDATA[start_erl]]></c> program so that
- it is not overwritten during upgrade. </p>
- <p>The <c><![CDATA[erlsrv]]></c> program's default options are not
- sufficient for release handling. The machine <c><![CDATA[erlsrv]]></c>
- starts should be specified as the <c><![CDATA[start_erl]]></c> program and
- the arguments should contain the <c><![CDATA[++]]></c> followed by desired
- options.</p>
+ <title>Notes</title>
+ <list type="bulleted">
+ <item>
+ <p>As the source code is distributed, it can easily be modified to
+ accept other options. The program must still accept option
+ <c><![CDATA[-data]]></c> with the semantics described above for the
+ release handler to work correctly.</p>
+ </item>
+ <item>
+ <p>The Erlang emulator is found by examining the registry keys for
+ the emulator version specified in the release data file. The new
+ emulator must be properly installed before the upgrade for
+ this to work.</p>
+ </item>
+ <item>
+ <p>Although the program is located together with files specific to the
+ emulator version, it is not expected to be specific to the
+ emulator version. The release handler does <em>not</em> change option
+ <c><![CDATA[-machine]]></c> to <c><![CDATA[erlsrv]]></c> during
+ emulator restart. Locate the (possibly customized)
+ <c><![CDATA[start_erl]]></c> program so that it is not overwritten
+ during upgrade.</p>
+ </item>
+ <item>
+ <p>The default options of the <c><![CDATA[erlsrv]]></c> program are not
+ sufficient for release handling. The machine started by
+ <c><![CDATA[erlsrv]]></c> is be specified as the
+ <c><![CDATA[start_erl]]></c> program and the arguments are to contain
+ <c><![CDATA[++]]></c> followed by the desired options.</p>
+ </item>
+ </list>
</section>
<section>
- <title>SEE ALSO</title>
- <p>erlsrv(1), release_handler(3)</p>
+ <title>See Also</title>
+ <p><seealso marker="erlsrv"><c>erlsrv(1)</c></seealso>,
+ <seealso marker="sasl:release_handler">
+ <c>release_handler(3)</c></seealso></p>
</section>
</comref>