aboutsummaryrefslogtreecommitdiffstats
path: root/erts/doc/src/zlib.xml
diff options
context:
space:
mode:
Diffstat (limited to 'erts/doc/src/zlib.xml')
-rw-r--r--erts/doc/src/zlib.xml693
1 files changed, 392 insertions, 301 deletions
diff --git a/erts/doc/src/zlib.xml b/erts/doc/src/zlib.xml
index 0a641346d9..f8140544b7 100644
--- a/erts/doc/src/zlib.xml
+++ b/erts/doc/src/zlib.xml
@@ -4,7 +4,7 @@
<erlref>
<header>
<copyright>
- <year>2005</year><year>2013</year>
+ <year>2005</year><year>2017</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -30,13 +30,18 @@
<file>zlib.xml</file>
</header>
<module>zlib</module>
- <modulesummary>Zlib Compression interface.</modulesummary>
+ <modulesummary>zlib compression interface.</modulesummary>
<description>
- <p>The zlib module provides an API for the zlib library
- (http://www.zlib.org).
- It is used to compress and decompress data. The
- data format is described by RFCs 1950 to 1952.</p>
- <p>A typical (compress) usage looks like:</p>
+ <p>This module provides an API for the zlib library
+ (<url href="http://www.zlib.net">www.zlib.net</url>).
+ It is used to compress and decompress data.
+ The data format is described by
+ <url href="https://www.ietf.org/rfc/rfc1950.txt">RFC 1950</url>,
+ <url href="https://www.ietf.org/rfc/rfc1951.txt">RFC 1951</url>, and
+ <url href="https://www.ietf.org/rfc/rfc1952.txt">RFC 1952</url>.</p>
+
+ <p>A typical (compress) usage is as follows:</p>
+
<pre>
Z = zlib:open(),
ok = zlib:deflateInit(Z,default),
@@ -50,29 +55,25 @@ Last = zlib:deflate(Z, [], finish),
ok = zlib:deflateEnd(Z),
zlib:close(Z),
list_to_binary([Compressed|Last])</pre>
+
<p>In all functions errors, <c>{'EXIT',{Reason,Backtrace}}</c>,
- might be thrown, where <c>Reason</c> describes the
- error. Typical reasons are:</p>
+ can be thrown, where <c>Reason</c> describes the error.</p>
+
+ <p>Typical <c>Reasons</c>s:</p>
+
<taglist>
<tag><c>badarg</c></tag>
- <item>
- <p>Bad argument</p>
+ <item>Bad argument.
</item>
<tag><c>data_error</c></tag>
- <item>
- <p>The data contains errors</p>
+ <item>The data contains errors.
</item>
<tag><c>stream_error</c></tag>
- <item>
- <p>Inconsistent stream state</p>
- </item>
+ <item>Inconsistent stream state.</item>
<tag><c>einval</c></tag>
- <item>
- <p>Bad value or wrong function called</p>
- </item>
+ <item>Bad value or wrong function called.</item>
<tag><c>{need_dictionary,Adler32}</c></tag>
- <item>
- <p>See <c>inflate/2</c></p>
+ <item>See <seealso marker="#inflate/2"><c>inflate/2</c></seealso>.
</item>
</taglist>
</description>
@@ -81,7 +82,7 @@ list_to_binary([Compressed|Last])</pre>
<datatype>
<name name="zstream"/>
<desc>
- <p>A zlib stream, see <seealso marker="#open/0">open/0</seealso>.
+ <p>A zlib stream, see <seealso marker="#open/0"><c>open/0</c></seealso>.
</p>
</desc>
</datatype>
@@ -104,116 +105,144 @@ list_to_binary([Compressed|Last])</pre>
</desc>
</datatype>
</datatypes>
+
<funcs>
<func>
- <name name="open" arity="0"/>
- <fsummary>Open a stream and return a stream reference</fsummary>
+ <name name="adler32" arity="2"/>
+ <fsummary>Calculate the Adler checksum.</fsummary>
+ <desc>
+ <p>Calculates the Adler-32 checksum for <c><anno>Data</anno></c>.</p>
+ </desc>
+ </func>
+
+ <func>
+ <name name="adler32" arity="3"/>
+ <fsummary>Calculate the Adler checksum.</fsummary>
+ <desc>
+ <p>Updates a running Adler-32 checksum for <c><anno>Data</anno></c>.
+ If <c><anno>Data</anno></c> is the empty binary or the empty iolist,
+ this function returns the required initial value for the checksum.</p>
+ <p>Example:</p>
+ <pre>
+Crc = lists:foldl(fun(Data,Crc0) ->
+ zlib:adler32(Z, Crc0, Data),
+ end, zlib:adler32(Z,&lt;&lt; &gt;&gt;), Datas)</pre>
+ </desc>
+ </func>
+
+ <func>
+ <name name="adler32_combine" arity="4"/>
+ <fsummary>Combine two Adler-32 checksums.</fsummary>
<desc>
- <p>Open a zlib stream.</p>
+ <p>Combines two Adler-32 checksums into one. For two binaries or
+ iolists, <c>Data1</c> and <c>Data2</c> with sizes of <c>Size1</c>
+ and <c><anno>Size2</anno></c>, with Adler-32 checksums
+ <c><anno>Adler1</anno></c> and <c><anno>Adler2</anno></c>.</p>
+ <p>This function returns the <c><anno>Adler</anno></c> checksum of
+ <c>[Data1,Data2]</c>, requiring only <c><anno>Adler1</anno></c>,
+ <c><anno>Adler2</anno></c>, and <c><anno>Size2</anno></c>.</p>
</desc>
</func>
+
<func>
<name name="close" arity="1"/>
- <fsummary>Close a stream</fsummary>
+ <fsummary>Close a stream.</fsummary>
<desc>
<p>Closes the stream referenced by <c><anno>Z</anno></c>.</p>
</desc>
</func>
+
<func>
- <name name="deflateInit" arity="1"/>
- <fsummary>Initialize a session for compression</fsummary>
+ <name name="compress" arity="1"/>
+ <fsummary>Compress data with standard zlib functionality.</fsummary>
<desc>
- <p>Same as <c>zlib:deflateInit(<anno>Z</anno>, default)</c>.</p>
+ <p>Compresses data with zlib headers and checksum.</p>
</desc>
</func>
+
<func>
- <name name="deflateInit" arity="2"/>
- <fsummary>Initialize a session for compression</fsummary>
+ <name name="crc32" arity="1"/>
+ <fsummary>Get current CRC.</fsummary>
<desc>
- <p>Initialize a zlib stream for compression.</p>
- <p><c><anno>Level</anno></c> decides the compression level to be used, 0
- (<c>none</c>), gives no compression at all, 1
- (<c>best_speed</c>) gives best speed and 9
- (<c>best_compression</c>) gives best compression.</p>
+ <p>Gets the current calculated CRC checksum.</p>
</desc>
</func>
+
<func>
- <name name="deflateInit" arity="6"/>
- <fsummary>Initialize a session for compression</fsummary>
+ <name name="crc32" arity="2"/>
+ <fsummary>Calculate CRC.</fsummary>
<desc>
- <p>Initiates a zlib stream for compression.</p>
- <p>The <c><anno>Level</anno></c> parameter decides the compression level to be
- used, 0 (<c>none</c>), gives no compression at all, 1
- (<c>best_speed</c>) gives best speed and 9
- (<c>best_compression</c>) gives best compression.</p>
- <p>The <c><anno>Method</anno></c> parameter decides which compression method to use,
- currently the only supported method is <c>deflated</c>.</p>
- <p>The <c><anno>WindowBits</anno></c> parameter is the base two logarithm
- of the window size (the size of the history buffer). It
- should be in the range 8 through 15. Larger values
- of this parameter result in better compression at the
- expense of memory usage. The default value is 15 if
- <c>deflateInit/2</c>. A negative <c><anno>WindowBits</anno></c>
- value suppresses the zlib header (and checksum) from the
- stream. Note that the zlib source mentions this only as a
- undocumented feature.</p>
- <p>The <c><anno>MemLevel</anno></c> parameter specifies how much memory
- should be allocated for the internal compression
- state. <c><anno>MemLevel</anno></c>=1 uses minimum memory but is slow and
- reduces compression ratio; <c><anno>MemLevel</anno></c>=9 uses maximum
- memory for optimal speed. The default value is 8.</p>
- <p>The <c><anno>Strategy</anno></c> parameter is used to tune
- the compression algorithm. Use the value <c>default</c> for
- normal data, <c>filtered</c> for data produced by a filter (or
- predictor), <c>huffman_only</c> to force Huffman encoding
- only (no string match), or <c>rle</c> to limit match
- distances to one (run-length encoding). Filtered data
- consists mostly of small values with a somewhat random
- distribution. In this case, the compression algorithm is tuned
- to compress them better. The effect of <c>filtered</c>is to
- force more Huffman coding and less string matching; it is
- somewhat intermediate between <c>default</c> and
- <c>huffman_only</c>. <c>rle</c> is designed to be almost as
- fast as <c>huffman_only</c>, but give better compression for PNG
- image data. The <c><anno>Strategy</anno></c> parameter only
- affects the compression ratio but not the correctness of the
- compressed output even if it is not set appropriately.</p>
+ <p>Calculates the CRC checksum for <c><anno>Data</anno></c>.</p>
+ </desc>
+ </func>
+
+ <func>
+ <name name="crc32" arity="3"/>
+ <fsummary>Calculate CRC.</fsummary>
+ <desc>
+ <p>Updates a running CRC checksum for <c><anno>Data</anno></c>.
+ If <c><anno>Data</anno></c> is the empty binary or the empty iolist,
+ this function returns the required initial value for the CRC.</p>
+ <p>Example:</p>
+ <pre>
+Crc = lists:foldl(fun(Data,Crc0) ->
+ zlib:crc32(Z, Crc0, Data),
+ end, zlib:crc32(Z,&lt;&lt; &gt;&gt;), Datas)</pre>
+ </desc>
+ </func>
+
+ <func>
+ <name name="crc32_combine" arity="4"/>
+ <fsummary>Combine two CRCs.</fsummary>
+ <desc>
+ <p>Combines two CRC checksums into one. For two binaries or iolists,
+ <c>Data1</c> and <c>Data2</c> with sizes of <c>Size1</c> and
+ <c><anno>Size2</anno></c>, with CRC checksums <c><anno>CRC1</anno></c>
+ and <c><anno>CRC2</anno></c>.</p>
+ <p>This function returns the <c><anno>CRC</anno></c> checksum of
+ <c>[Data1,Data2]</c>, requiring only <c><anno>CRC1</anno></c>,
+ <c><anno>CRC2</anno></c>, and <c><anno>Size2</anno></c>.</p>
</desc>
</func>
+
<func>
<name name="deflate" arity="2"/>
- <fsummary>Compress data</fsummary>
+ <fsummary>Compress data.</fsummary>
<desc>
<p>Same as <c>deflate(<anno>Z</anno>, <anno>Data</anno>, none)</c>.</p>
</desc>
</func>
+
<func>
<name name="deflate" arity="3"/>
- <fsummary>Compress data</fsummary>
+ <fsummary>Compress data.</fsummary>
<desc>
- <p><c>deflate/3</c> compresses as much data as possible, and
- stops when the input buffer becomes empty. It may introduce
+ <p>Compresses as much data as possible, and
+ stops when the input buffer becomes empty. It can introduce
some output latency (reading input without producing any
output) except when forced to flush.</p>
- <p>If the parameter <c><anno>Flush</anno></c> is set to <c>sync</c>, all
+ <p>If <c><anno>Flush</anno></c> is set to <c>sync</c>, all
pending output is flushed to the output buffer and the
output is aligned on a byte boundary, so that the
decompressor can get all input data available so far.
- Flushing may degrade compression for some compression algorithms and so
- it should be used only when necessary.</p>
- <p>If <c><anno>Flush</anno></c> is set to <c>full</c>, all output is flushed as with
- <c>sync</c>, and the compression state is reset so that decompression can
- restart from this point if previous compressed data has been damaged or if
- random access is desired. Using <c>full</c> too often can seriously degrade
- the compression.</p>
- <p>If the parameter <c><anno>Flush</anno></c> is set to <c>finish</c>,
- pending input is processed, pending output is flushed and
- <c>deflate/3</c> returns. Afterwards the only possible
- operations on the stream are <c>deflateReset/1</c> or <c>deflateEnd/1</c>.</p>
- <p><c><anno>Flush</anno></c> can be set to <c>finish</c> immediately after
- <c>deflateInit</c> if all compression is to be done in one step.</p>
+ Flushing can degrade compression for some compression algorithms;
+ thus, use it only when necessary.</p>
+ <p>If <c><anno>Flush</anno></c> is set to <c>full</c>, all output is
+ flushed as with <c>sync</c>, and the compression state is reset so
+ that decompression can restart from this point if previous compressed
+ data has been damaged or if random access is desired. Using
+ <c>full</c> too often can seriously degrade the compression.</p>
+ <p>If <c><anno>Flush</anno></c> is set to <c>finish</c>,
+ pending input is processed, pending output is flushed, and
+ <c>deflate/3</c> returns. Afterwards the only possible operations
+ on the stream are
+ <seealso marker="#deflateReset/1"><c>deflateReset/1</c></seealso> or
+ <seealso marker="#deflateEnd/1"><c>deflateEnd/1</c></seealso>.</p>
+ <p><c><anno>Flush</anno></c> can be set to <c>finish</c> immediately
+ after <seealso marker="#deflateInit/1"><c>deflateInit</c></seealso>
+ if all compression is to be done in one step.</p>
+ <p>Example:</p>
<pre>
-
zlib:deflateInit(Z),
B1 = zlib:deflate(Z,Data),
B2 = zlib:deflate(Z,&lt;&lt; &gt;&gt;,finish),
@@ -221,116 +250,243 @@ zlib:deflateEnd(Z),
list_to_binary([B1,B2])</pre>
</desc>
</func>
+
<func>
- <name name="deflateSetDictionary" arity="2"/>
- <fsummary>Initialize the compression dictionary</fsummary>
+ <name name="deflateEnd" arity="1"/>
+ <fsummary>End deflate session.</fsummary>
<desc>
- <p>Initializes the compression dictionary from the given byte
- sequence without producing any compressed output. This
- function must be called immediately after
- <c>deflateInit/[1|2|6]</c> or <c>deflateReset/1</c>, before
- any call of <c>deflate/3</c>. The compressor and
- decompressor must use exactly the same dictionary (see
- <c>inflateSetDictionary/2</c>). The adler checksum of the
- dictionary is returned.</p>
+ <p>Ends the deflate session and cleans all data used. Notice that this
+ function throws a <c>data_error</c> exception if the last call to
+ <seealso marker="#deflate/3"><c>deflate/3</c></seealso>
+ was not called with <c>Flush</c> set to <c>finish</c>.</p>
</desc>
</func>
+
<func>
- <name name="deflateReset" arity="1"/>
- <fsummary>Reset the deflate session</fsummary>
+ <name name="deflateInit" arity="1"/>
+ <fsummary>Initialize a session for compression.</fsummary>
<desc>
- <p>This function is equivalent to <c>deflateEnd/1</c>
- followed by <c>deflateInit/[1|2|6]</c>, but does not free
- and reallocate all the internal compression state. The
- stream will keep the same compression level and any other
- attributes.</p>
+ <p>Same as <c>zlib:deflateInit(<anno>Z</anno>, default)</c>.</p>
+ </desc>
+ </func>
+
+ <func>
+ <name name="deflateInit" arity="2"/>
+ <fsummary>Initialize a session for compression.</fsummary>
+ <desc>
+ <p>Initializes a zlib stream for compression.</p>
+ <p><c><anno>Level</anno></c> decides the compression level to be
+ used:</p>
+ <list type="bulleted">
+ <item>0 (<c>none</c>), gives no compression</item>
+ <item>1 (<c>best_speed</c>) gives best speed</item>
+ <item>9 (<c>best_compression</c>) gives best compression</item>
+ </list>
+ </desc>
+ </func>
+
+ <func>
+ <name name="deflateInit" arity="6"/>
+ <fsummary>Initialize a session for compression.</fsummary>
+ <desc>
+ <p>Initiates a zlib stream for compression.</p>
+ <taglist>
+ <tag><c><anno>Level</anno></c></tag>
+ <item>
+ <p>Compression level to use:</p>
+ <list type="bulleted">
+ <item>0 (<c>none</c>), gives no compression</item>
+ <item>1 (<c>best_speed</c>) gives best speed</item>
+ <item>9 (<c>best_compression</c>) gives best compression</item>
+ </list>
+ </item>
+ <tag><c><anno>Method</anno></c></tag>
+ <item>
+ <p>Compression method to use, currently the only supported method
+ is <c>deflated</c>.</p>
+ </item>
+ <tag><c><anno>WindowBits</anno></c></tag>
+ <item>
+ <p>The base two logarithm of the window size (the size of the
+ history buffer). It is to be in the range 8 through 15. Larger
+ values result in better compression at the expense of memory
+ usage. Defaults to 15 if <seealso marker="#deflateInit/2">
+ <c>deflateInit/2</c></seealso> is used. A negative
+ <c><anno>WindowBits</anno></c> value suppresses the zlib header
+ (and checksum) from the stream. Notice that the zlib source
+ mentions this only as a undocumented feature.</p>
+ <warning>
+ <p>Due to a known bug in the underlying zlib library, <c>WindowBits</c> values 8 and -8
+ do not work as expected. In zlib versions before 1.2.9 values
+ 8 and -8 are automatically changed to 9 and -9. <em>From zlib version 1.2.9
+ value -8 is rejected</em> causing <c>zlib:deflateInit/6</c> to fail
+ (8 is still changed to 9). It also seem possible that future versions
+ of zlib may fix this bug and start accepting 8 and -8 as is.</p>
+ <p>Conclusion: Avoid values 8 and -8 unless you know your zlib version supports them.</p>
+ </warning>
+ </item>
+ <tag><c><anno>MemLevel</anno></c></tag>
+ <item>
+ <p>Specifies how much memory is to be allocated for the internal
+ compression state: <c><anno>MemLevel</anno></c>=1 uses minimum
+ memory but is slow and reduces compression ratio;
+ <c><anno>MemLevel</anno></c>=9 uses maximum memory for optimal
+ speed. Defaults to 8.</p>
+ </item>
+ <tag><c><anno>Strategy</anno></c></tag>
+ <item>
+ <p>Tunes the compression algorithm. Use the following values:</p>
+ <list type="bulleted">
+ <item><c>default</c> for normal data</item>
+ <item><c>filtered</c> for data produced by a filter (or
+ predictor)</item>
+ <item><c>huffman_only</c> to force Huffman encoding only
+ (no string match)</item>
+ <item><c>rle</c> to limit match distances to one (run-length
+ encoding)</item>
+ </list>
+ <p>Filtered data consists mostly of small values with a somewhat
+ random distribution. In this case, the compression algorithm is
+ tuned to compress them better. The effect of <c>filtered</c> is to
+ force more Huffman coding and less string matching; it is somewhat
+ intermediate between <c>default</c> and <c>huffman_only</c>.
+ <c>rle</c> is designed to be almost as fast as
+ <c>huffman_only</c>, but gives better compression for PNG image
+ data.</p>
+ <p><c><anno>Strategy</anno></c> affects only the compression ratio,
+ but not the correctness of the compressed output even if it is not
+ set appropriately.</p>
+ </item>
+ </taglist>
</desc>
</func>
+
<func>
<name name="deflateParams" arity="3"/>
- <fsummary>Dynamicly update deflate parameters</fsummary>
+ <fsummary>Dynamicly update deflate parameters.</fsummary>
<desc>
- <p>Dynamically update the compression level and compression
- strategy. The interpretation of <c><anno>Level</anno></c> and
- <c><anno>Strategy</anno></c> is as in <c>deflateInit/6</c>. This can be
+ <p>Dynamically updates the compression level and compression
+ strategy. The interpretation of <c><anno>Level</anno></c> and
+ <c><anno>Strategy</anno></c> is as in
+ <seealso marker="#deflateInit/6"><c>deflateInit/6</c></seealso>.
+ This can be
used to switch between compression and straight copy of the
input data, or to switch to a different kind of input data
requiring a different strategy. If the compression level is
changed, the input available so far is compressed with the
- old level (and may be flushed); the new level will take
- effect only at the next call of <c>deflate/3</c>.</p>
- <p>Before the call of <c>deflateParams</c>, the stream state must be set as for
- a call of <c>deflate/3</c>, since the currently available input may have to
- be compressed and flushed.</p>
+ old level (and can be flushed); the new level takes
+ effect only at the next call of
+ <seealso marker="#deflate/3"><c>deflate/3</c></seealso>.</p>
+ <p>Before the call of <c>deflateParams</c>, the stream state must be
+ set as for a call of <c>deflate/3</c>, as the currently available
+ input may have to be compressed and flushed.</p>
</desc>
</func>
+
<func>
- <name name="deflateEnd" arity="1"/>
- <fsummary>End deflate session</fsummary>
+ <name name="deflateReset" arity="1"/>
+ <fsummary>Reset the deflate session.</fsummary>
+ <desc>
+ <p>Equivalent to
+ <seealso marker="#deflateEnd/1"><c>deflateEnd/1</c></seealso>
+ followed by
+ <seealso marker="#deflateInit/1"><c>deflateInit/1,2,6</c></seealso>,
+ but does not free and reallocate all the internal compression state.
+ The stream keeps the same compression level and any other
+ attributes.</p>
+ </desc>
+ </func>
+
+ <func>
+ <name name="deflateSetDictionary" arity="2"/>
+ <fsummary>Initialize the compression dictionary.</fsummary>
<desc>
- <p>End the deflate session and cleans all data used.
- Note that this function will throw an <c>data_error</c>
- exception if the last call to
- <c>deflate/3</c> was not called with <c>Flush</c> set to
- <c>finish</c>.</p>
+ <p>Initializes the compression dictionary from the specified byte
+ sequence without producing any compressed output.</p>
+ <p>This function must be called immediately after
+ <seealso marker="#deflateInit/1"><c>deflateInit/1,2,6</c></seealso> or
+ <seealso marker="#deflateReset/1"><c>deflateReset/1</c></seealso>,
+ before any call of
+ <seealso marker="#deflate/3"><c>deflate/3</c></seealso>.
+ The compressor and decompressor must use the same dictionary (see
+ <seealso marker="#inflateSetDictionary/2">
+ <c>inflateSetDictionary/2</c></seealso>).</p>
+ <p>The Adler checksum of the dictionary is returned.</p>
</desc>
</func>
+
<func>
- <name name="inflateInit" arity="1"/>
- <fsummary>Initialize a session for decompression</fsummary>
+ <name name="getBufSize" arity="1"/>
+ <fsummary>Get buffer size.</fsummary>
<desc>
- <p>Initialize a zlib stream for decompression.</p>
+ <p>Gets the size of the intermediate buffer.</p>
</desc>
</func>
+
<func>
- <name name="inflateInit" arity="2"/>
- <fsummary>Initialize a session for decompression</fsummary>
+ <name name="gunzip" arity="1"/>
+ <fsummary>Uncompress data with gz header.</fsummary>
<desc>
- <p>Initialize decompression session on zlib stream.</p>
- <p>The <c><anno>WindowBits</anno></c> parameter is the base two logarithm
- of the maximum window size (the size of the history buffer).
- It should be in the range 8 through 15.
- The default value is 15 if <c>inflateInit/1</c> is used.
- If a compressed stream with a larger window size is
- given as input, inflate() will throw the <c>data_error</c>
- exception. A negative <c><anno>WindowBits</anno></c> value makes zlib ignore the
- zlib header (and checksum) from the stream. Note that the zlib
- source mentions this only as a undocumented feature.</p>
+ <p>Uncompresses data with gz headers and checksum.</p>
</desc>
</func>
+
+ <func>
+ <name name="gzip" arity="1"/>
+ <fsummary>Compress data with gz header.</fsummary>
+ <desc>
+ <p>Compresses data with gz headers and checksum.</p>
+ </desc>
+ </func>
+
<func>
<name name="inflate" arity="2"/>
- <fsummary>Decompress data</fsummary>
+ <fsummary>Decompress data.</fsummary>
<desc>
- <p><c>inflate/2</c> decompresses as much data as possible.
- It may introduce some output latency (reading
+ <p>Decompresses as much data as possible.
+ It can introduce some output latency (reading
input without producing any output).</p>
<p>If a preset dictionary is needed at this point (see
- <c>inflateSetDictionary</c> below), <c>inflate/2</c> throws a
- <c>{need_dictionary,Adler}</c> exception where <c>Adler</c> is
- the adler32 checksum of the dictionary chosen by the
- compressor.</p>
+ <seealso marker="#inflateSetDictionary/2">
+ <c>inflateSetDictionary/2</c></seealso>), <c>inflate/2</c> throws a
+ <c>{need_dictionary,Adler}</c> exception, where <c>Adler</c> is
+ the Adler-32 checksum of the dictionary chosen by the compressor.</p>
+ </desc>
+ </func>
+
+ <func>
+ <name name="inflateChunk" arity="1"/>
+ <fsummary>Read next uncompressed chunk.</fsummary>
+ <desc>
+ <p>Reads the next chunk of uncompressed data, initialized by
+ <seealso marker="#inflateChunk/2"><c>inflateChunk/2</c></seealso>.</p>
+ <p>This function is to be repeatedly called, while it returns
+ <c>{more, Decompressed}</c>.</p>
</desc>
</func>
+
<func>
<name name="inflateChunk" arity="2"/>
- <fsummary>Decompress data with limited output size</fsummary>
+ <fsummary>Decompress data with limited output size.</fsummary>
<desc>
- <p>Like <c>inflate/2</c>, but decompress no more data than
- will fit in the buffer configured via <c>setBufSize/2</c>.
+ <p>Like <seealso marker="#inflate/2"><c>inflate/2</c></seealso>,
+ but decompresses no more data than will fit in the buffer configured
+ through <seealso marker="#setBufSize/2"><c>setBufSize/2</c></seealso>.
Is is useful when decompressing a stream with a high compression
- ratio such that a small amount of compressed input may expand up to
- 1000 times.
- It returns <c>{more, Decompressed}</c>, when there is more output
- available, and <c>inflateChunk/1</c> should be used to read it.
- It may introduce some output latency (reading
+ ratio, such that a small amount of compressed input can expand up to
+ 1000 times.</p>
+ <p>This function returns <c>{more, Decompressed}</c>, when there is
+ more output available, and
+ <seealso marker="#inflateChunk/1"><c>inflateChunk/1</c></seealso>
+ is to be used to read it.</p>
+ <p>This function can introduce some output latency (reading
input without producing any output).</p>
<p>If a preset dictionary is needed at this point (see
- <c>inflateSetDictionary</c> below), <c>inflateChunk/2</c> throws a
- <c>{need_dictionary,Adler}</c> exception where <c>Adler</c> is
- the adler32 checksum of the dictionary chosen by the
- compressor.</p>
-
+ <seealso marker="#inflateSetDictionary/2">
+ <c>inflateSetDictionary/2</c></seealso>), this function throws a
+ <c>{need_dictionary,Adler}</c> exception, where <c>Adler</c> is
+ the Adler-32 checksum of the dictionary chosen by the compressor.</p>
+ <p>Example:</p>
<pre>
walk(Compressed, Handler) ->
Z = zlib:open(),
@@ -345,191 +501,126 @@ loop(Z, Handler, {more, Uncompressed}) ->
Handler(Uncompressed),
loop(Z, Handler, zlib:inflateChunk(Z));
loop(Z, Handler, Uncompressed) ->
- Handler(Uncompressed).
- </pre>
- </desc>
- </func>
- <func>
- <name name="inflateChunk" arity="1"/>
- <fsummary>Read next uncompressed chunk</fsummary>
- <desc>
- <p>Read next chunk of uncompressed data, initialized by
- <c>inflateChunk/2</c>.</p>
- <p>This function should be repeatedly called, while it returns
- <c>{more, Decompressed}</c>.</p>
- </desc>
- </func>
- <func>
- <name name="inflateSetDictionary" arity="2"/>
- <fsummary>Initialize the decompression dictionary</fsummary>
- <desc>
- <p>Initializes the decompression dictionary from the given
- uncompressed byte sequence. This function must be called
- immediately after a call of <c>inflate/2</c> if this call
- threw a <c>{need_dictionary,Adler}</c> exception.
- The dictionary chosen by the
- compressor can be determined from the Adler value thrown
- by the call to <c>inflate/2</c>. The compressor and decompressor
- must use exactly the same dictionary (see <c>deflateSetDictionary/2</c>).</p>
- <p>Example:</p>
- <pre>
-unpack(Z, Compressed, Dict) ->
- case catch zlib:inflate(Z, Compressed) of
- {'EXIT',{{need_dictionary,DictID},_}} ->
- zlib:inflateSetDictionary(Z, Dict),
- Uncompressed = zlib:inflate(Z, []);
- Uncompressed ->
- Uncompressed
- end.</pre>
- </desc>
- </func>
- <func>
- <name name="inflateReset" arity="1"/>
- <fsummary>>Reset the inflate session</fsummary>
- <desc>
- <p>This function is equivalent to <c>inflateEnd/1</c> followed
- by <c>inflateInit/1</c>, but does not free and reallocate all
- the internal decompression state. The stream will keep
- attributes that may have been set by <c>inflateInit/[1|2]</c>.</p>
+ Handler(Uncompressed).</pre>
</desc>
</func>
+
<func>
<name name="inflateEnd" arity="1"/>
- <fsummary>End inflate session</fsummary>
+ <fsummary>End inflate session.</fsummary>
<desc>
- <p>End the inflate session and cleans all data used. Note
- that this function will throw a <c>data_error</c> exception
+ <p>Ends the inflate session and cleans all data used. Notice
+ that this function throws a <c>data_error</c> exception
if no end of stream was found (meaning that not all data
has been uncompressed).</p>
</desc>
</func>
+
<func>
- <name name="setBufSize" arity="2"/>
- <fsummary>Set buffer size</fsummary>
- <desc>
- <p>Sets the intermediate buffer size.</p>
- </desc>
- </func>
- <func>
- <name name="getBufSize" arity="1"/>
- <fsummary>Get buffer size</fsummary>
- <desc>
- <p>Get the size of intermediate buffer.</p>
- </desc>
- </func>
- <func>
- <name name="crc32" arity="1"/>
- <fsummary>Get current CRC</fsummary>
- <desc>
- <p>Get the current calculated CRC checksum.</p>
- </desc>
- </func>
- <func>
- <name name="crc32" arity="2"/>
- <fsummary>Calculate CRC</fsummary>
- <desc>
- <p>Calculate the CRC checksum for <c><anno>Data</anno></c>.</p>
- </desc>
- </func>
- <func>
- <name name="crc32" arity="3"/>
- <fsummary>Calculate CRC</fsummary>
+ <name name="inflateInit" arity="1"/>
+ <fsummary>Initialize a session for decompression.</fsummary>
<desc>
- <p>Update a running CRC checksum for <c><anno>Data</anno></c>.
- If <c><anno>Data</anno></c> is the empty binary or the empty iolist, this function returns
- the required initial value for the crc.</p>
- <pre>
-Crc = lists:foldl(fun(Data,Crc0) ->
- zlib:crc32(Z, Crc0, Data),
- end, zlib:crc32(Z,&lt;&lt; &gt;&gt;), Datas)</pre>
+ <p>Initializes a zlib stream for decompression.</p>
</desc>
</func>
+
<func>
- <name name="crc32_combine" arity="4"/>
- <fsummary>Combine two CRC's</fsummary>
+ <name name="inflateInit" arity="2"/>
+ <fsummary>Initialize a session for decompression.</fsummary>
<desc>
- <p>Combine two CRC checksums into one. For two binaries or iolists,
- <c>Data1</c> and <c>Data2</c> with sizes of <c>Size1</c> and
- <c><anno>Size2</anno></c>, with CRC checksums <c><anno>CRC1</anno></c> and
- <c><anno>CRC2</anno></c>. <c>crc32_combine/4</c> returns the <c><anno>CRC</anno></c>
- checksum of <c>[Data1,Data2]</c>, requiring
- only <c><anno>CRC1</anno></c>, <c><anno>CRC2</anno></c>, and <c><anno>Size2</anno></c>.
- </p>
+ <p>Initializes a decompression session on zlib stream.</p>
+ <p><c><anno>WindowBits</anno></c> is the base two logarithm
+ of the maximum window size (the size of the history buffer).
+ It is to be in the range 8 through 15. Default to 15 if
+ <seealso marker="#inflateInit/1"><c>inflateInit/1</c></seealso>
+ is used.</p>
+ <p>If a compressed stream with a larger window size is specified as
+ input, <seealso marker="#inflate/2"><c>inflate/2</c></seealso>
+ throws the <c>data_error</c> exception.</p>
+ <p>A negative <c><anno>WindowBits</anno></c> value makes zlib
+ ignore the zlib header (and checksum) from the stream. Notice that
+ the zlib source mentions this only as a undocumented feature.</p>
</desc>
</func>
+
<func>
- <name name="adler32" arity="2"/>
- <fsummary>Calculate the adler checksum</fsummary>
+ <name name="inflateReset" arity="1"/>
+ <fsummary>>Reset the inflate session.</fsummary>
<desc>
- <p>Calculate the Adler-32 checksum for <c><anno>Data</anno></c>.</p>
+ <p>Equivalent to
+ <seealso marker="#inflateEnd/1"><c>inflateEnd/1</c></seealso>
+ followed by
+ <seealso marker="#inflateInit/1"><c>inflateInit/1</c></seealso>,
+ but does not free and reallocate all the internal decompression state.
+ The stream will keep attributes that could have been set by
+ <c>inflateInit/1,2</c>.</p>
</desc>
</func>
+
<func>
- <name name="adler32" arity="3"/>
- <fsummary>Calculate the adler checksum</fsummary>
+ <name name="inflateSetDictionary" arity="2"/>
+ <fsummary>Initialize the decompression dictionary.</fsummary>
<desc>
- <p>Update a running Adler-32 checksum for <c><anno>Data</anno></c>.
- If <c><anno>Data</anno></c> is the empty binary or the empty iolist, this function returns
- the required initial value for the checksum.</p>
+ <p>Initializes the decompression dictionary from the specified
+ uncompressed byte sequence. This function must be called
+ immediately after a call of
+ <seealso marker="#inflate/2"><c>inflate/2</c></seealso>
+ if this call threw a <c>{need_dictionary,Adler}</c> exception.
+ The dictionary chosen by the compressor can be determined from the
+ Adler value thrown by the call to <c>inflate/2</c>.
+ The compressor and decompressor must use the same dictionary (see
+ <seealso marker="#deflateSetDictionary/2">
+ <c>deflateSetDictionary/2</c></seealso>).</p>
+ <p>Example:</p>
<pre>
-Crc = lists:foldl(fun(Data,Crc0) ->
- zlib:adler32(Z, Crc0, Data),
- end, zlib:adler32(Z,&lt;&lt; &gt;&gt;), Datas)</pre>
+unpack(Z, Compressed, Dict) ->
+ case catch zlib:inflate(Z, Compressed) of
+ {'EXIT',{{need_dictionary,DictID},_}} ->
+ zlib:inflateSetDictionary(Z, Dict),
+ Uncompressed = zlib:inflate(Z, []);
+ Uncompressed ->
+ Uncompressed
+ end.</pre>
</desc>
</func>
+
<func>
- <name name="adler32_combine" arity="4"/>
- <fsummary>Combine two Adler-32 checksums</fsummary>
+ <name name="open" arity="0"/>
+ <fsummary>Open a stream and return a stream reference.</fsummary>
<desc>
- <p>Combine two Adler-32 checksums into one. For two binaries or iolists,
- <c>Data1</c> and <c>Data2</c> with sizes of <c>Size1</c> and
- <c><anno>Size2</anno></c>, with Adler-32 checksums <c><anno>Adler1</anno></c> and
- <c><anno>Adler2</anno></c>. <c>adler32_combine/4</c> returns the <c><anno>Adler</anno></c>
- checksum of <c>[Data1,Data2]</c>, requiring
- only <c><anno>Adler1</anno></c>, <c><anno>Adler2</anno></c>, and <c><anno>Size2</anno></c>.
- </p>
+ <p>Opens a zlib stream.</p>
</desc>
</func>
+
<func>
- <name name="compress" arity="1"/>
- <fsummary>Compress data with standard zlib functionality</fsummary>
+ <name name="setBufSize" arity="2"/>
+ <fsummary>Set buffer size.</fsummary>
<desc>
- <p>Compress data (with zlib headers and checksum).</p>
+ <p>Sets the intermediate buffer size.</p>
</desc>
</func>
+
<func>
<name name="uncompress" arity="1"/>
- <fsummary>Uncompress data with standard zlib functionality</fsummary>
+ <fsummary>Uncompress data with standard zlib functionality.</fsummary>
<desc>
- <p>Uncompress data (with zlib headers and checksum).</p>
- </desc>
- </func>
- <func>
- <name name="zip" arity="1"/>
- <fsummary>Compress data without the zlib headers</fsummary>
- <desc>
- <p>Compress data (without zlib headers and checksum).</p>
+ <p>Uncompresses data with zlib headers and checksum.</p>
</desc>
</func>
+
<func>
<name name="unzip" arity="1"/>
- <fsummary>Uncompress data without the zlib headers</fsummary>
+ <fsummary>Uncompress data without the zlib headers.</fsummary>
<desc>
- <p>Uncompress data (without zlib headers and checksum).</p>
- </desc>
- </func>
- <func>
- <name name="gzip" arity="1"/>
- <fsummary>Compress data with gz header</fsummary>
- <desc>
- <p>Compress data (with gz headers and checksum).</p>
+ <p>Uncompresses data without zlib headers and checksum.</p>
</desc>
</func>
+
<func>
- <name name="gunzip" arity="1"/>
- <fsummary>Uncompress data with gz header</fsummary>
+ <name name="zip" arity="1"/>
+ <fsummary>Compress data without the zlib headers.</fsummary>
<desc>
- <p>Uncompress data (with gz headers and checksum).</p>
+ <p>Compresses data without zlib headers and checksum.</p>
</desc>
</func>
</funcs>