aboutsummaryrefslogtreecommitdiffstats
path: root/erts/doc/src
diff options
context:
space:
mode:
Diffstat (limited to 'erts/doc/src')
-rw-r--r--erts/doc/src/driver.xml39
-rw-r--r--erts/doc/src/driver_entry.xml6
-rw-r--r--erts/doc/src/epmd.xml19
-rw-r--r--erts/doc/src/erl.xml52
-rw-r--r--erts/doc/src/erl_driver.xml94
-rw-r--r--erts/doc/src/erl_nif.xml13
-rw-r--r--erts/doc/src/init.xml13
-rw-r--r--erts/doc/src/notes.xml49
-rw-r--r--erts/doc/src/run_erl.xml8
9 files changed, 206 insertions, 87 deletions
diff --git a/erts/doc/src/driver.xml b/erts/doc/src/driver.xml
index db455312ec..2b1ed398ee 100644
--- a/erts/doc/src/driver.xml
+++ b/erts/doc/src/driver.xml
@@ -63,7 +63,8 @@
<p>This is a simple driver for accessing a postgres
database using the libpq C client library. Postgres
is used because it's free and open source. For information
- on postgres, refer to the website www.postgres.org.</p>
+ on postgres, refer to the website
+ <url href="http://www.postgres.org">www.postgres.org</url>.</p>
<p>The driver is synchronous, it uses the synchronous calls of
the client library. This is only for simplicity, and is
generally not good, since it will
@@ -210,7 +211,7 @@ static void stop(ErlDrvData drv_data)
input data is a string paramater for <c><![CDATA[connect]]></c> and
<c><![CDATA[select]]></c>. The returned data consists of Erlang terms.</p>
<p>The functions <c><![CDATA[get_s]]></c> and <c><![CDATA[ei_x_to_new_binary]]></c> are
- utilities that is used to make the code shorter. <c><![CDATA[get_s]]></c>
+ utilities that are used to make the code shorter. <c><![CDATA[get_s]]></c>
duplicates the string and zero-terminates it, since the
postgres client library wants that. <c><![CDATA[ei_x_to_new_binary]]></c>
takes an <c><![CDATA[ei_x_buff]]></c> buffer and allocates a binary and
@@ -244,7 +245,7 @@ static int control(ErlDrvData drv_data, unsigned int command, char *buf,
return r;
}
]]></code>
- <p>In <c><![CDATA[do_connect]]></c> is where we log in to the database. If the connection
+ <p><c><![CDATA[do_connect]]></c> is where we log in to the database. If the connection
was successful we store the connection handle in our driver
data, and return ok. Otherwise, we return the error message
from postgres, and store <c><![CDATA[NULL]]></c> in the driver data.</p>
@@ -264,7 +265,7 @@ static int do_connect(const char *s, our_data_t* data, ei_x_buff* x)
}
]]></code>
<p>If we are connected (if the connection handle is not <c><![CDATA[NULL]]></c>),
- we log out from the database. We need to check if a we should
+ we log out from the database. We need to check if we should
encode an ok, since we might get here from the <c><![CDATA[stop]]></c>
function, which doesn't return data to the emulator.</p>
<code type="none"><![CDATA[
@@ -279,7 +280,7 @@ static int do_disconnect(our_data_t* data, ei_x_buff* x)
return 0;
}
]]></code>
- <p>We execute a query and encodes the result. Encoding is done
+ <p>We execute a query and encode the result. Encoding is done
in another C module, <c><![CDATA[pg_encode.c]]></c> which is also provided
as sample code.</p>
<code type="none"><![CDATA[
@@ -291,7 +292,7 @@ static int do_select(const char* s, our_data_t* data, ei_x_buff* x)
return 0;
}
]]></code>
- <p>Here we simply checks the result from postgres, and
+ <p>Here we simply check the result from postgres, and
if it's data we encode it as lists of lists with
column data. Everything from postgres is C strings,
so we just use <c><![CDATA[ei_x_encode_string]]></c> to send
@@ -392,7 +393,7 @@ disconnect(Port) ->
select(Port, Query) ->
binary_to_term(port_control(Port, ?DRV_SELECT, Query)).
]]></code>
- <p>The api is simple: <c><![CDATA[connect/1]]></c> loads the driver, opens it
+ <p>The API is simple: <c><![CDATA[connect/1]]></c> loads the driver, opens it
and logs on to the database, returning the Erlang port
if successful, <c><![CDATA[select/2]]></c> sends a query to the driver,
and returns the result, <c><![CDATA[disconnect/1]]></c> closes the
@@ -417,7 +418,7 @@ select(Port, Query) ->
<p>Sometimes database queries can take long time to
complete, in our <c><![CDATA[pg_sync]]></c> driver, the emulator
halts while the driver is doing its job. This is
- often not acceptable, since no other Erlang processes
+ often not acceptable, since no other Erlang process
gets a chance to do anything. To improve on our
postgres driver, we reimplement it using the asynchronous
calls in LibPQ.</p>
@@ -472,7 +473,7 @@ typedef struct our_data_t {
whether the driver is waiting for a connection or waiting
for the result of a query. (This is needed since the entry
<c><![CDATA[ready_io]]></c> will be called both when connecting and
- when there is query result.)</p>
+ when there is a query result.)</p>
<code type="none"><![CDATA[
static int do_connect(const char *s, our_data_t* data)
{
@@ -571,7 +572,7 @@ static void ready_io(ErlDrvData drv_data, ErlDrvEvent event)
connection is successful, or error if it's not. If the
connection is not yet established, we simply return; <c><![CDATA[ready_io]]></c>
will be called again.</p>
- <p>If we have result from a connect, indicated that we have data in
+ <p>If we have a result from a connect, indicated by having data in
the <c><![CDATA[x]]></c> buffer, we no longer need to select on
output (<c><![CDATA[ready_output]]></c>), so we remove this by calling
<c><![CDATA[driver_select]]></c>.</p>
@@ -630,9 +631,9 @@ return_port_data(Port) ->
message queue. The function <c><![CDATA[return_port_data]]></c> above
receives data from the port. Since the data is in
binary format, we use <c><![CDATA[binary_to_term/1]]></c> to convert
- it to Erlang term. Note that the driver is opened in
- binary mode, <c><![CDATA[open_port/2]]></c> is called with the option
- <c><![CDATA[[binary]]]></c>. This means that data sent from the driver
+ it to an Erlang term. Note that the driver is opened in
+ binary mode (<c><![CDATA[open_port/2]]></c> is called with the option
+ <c><![CDATA[[binary]]]></c>). This means that data sent from the driver
to the emulator is sent as binaries. Without the <c><![CDATA[binary]]></c>
option, they would have been lists of integers.</p>
</section>
@@ -646,15 +647,15 @@ return_port_data(Port) ->
of a list of integers. For large lists (more than 100000
elements), this will take some time, so we will perform this
as an asynchronous task.</p>
- <p>The asynchronous api for drivers are quite complicated. First
+ <p>The asynchronous API for drivers is quite complicated. First
of all, the work must be prepared. In our example we do this
in <c><![CDATA[output]]></c>. We could have used <c><![CDATA[control]]></c> just as well,
but we want some variation in our examples. In our driver, we allocate
- a structure that contains all needed for the asynchronous task
+ a structure that contains anything that's needed for the asynchronous task
to do the work. This is done in the main emulator thread.
Then the asynchronous function is called from a driver thread,
- separate from the main emulator thread. Note that the driver-
- functions are not reentrant, so they shouldn't be used.
+ separate from the main emulator thread. Note that the driver-functions
+ are not reentrant, so they shouldn't be used.
Finally, after the function is completed, the driver callback
<c><![CDATA[ready_async]]></c> is called from the main emulator thread,
this is where we return the result to Erlang. (We can't
@@ -692,7 +693,7 @@ static ErlDrvEntry next_perm_driver_entry = {
be sent later from the <c><![CDATA[ready_async]]></c> call-back.</p>
<p>The <c><![CDATA[async_data]]></c> will be passed to the <c><![CDATA[do_perm]]></c> function.
We do not use a <c><![CDATA[async_free]]></c> function (the last argument to
- <c><![CDATA[driver_async]]></c>, it's only used if the task is cancelled
+ <c><![CDATA[driver_async]]></c>), it's only used if the task is cancelled
programmatically.</p>
<code type="none"><![CDATA[
struct our_async_data {
@@ -743,7 +744,7 @@ static void ready_async(ErlDrvData drv_data, ErlDrvThreadData async_data)
ErlDrvPort port = reinterpret_cast<ErlDrvPort>(drv_data);
our_async_data* d = reinterpret_cast<our_async_data*>(async_data);
int n = d->data.size(), result_n = n*2 + 3;
- ErlDrvTermData* result = new ErlDrvTermData[result_n], * rp = result;
+ ErlDrvTermData *result = new ErlDrvTermData[result_n], *rp = result;
for (vector<int>::iterator i = d->data.begin();
i != d->data.end(); ++i) {
*rp++ = ERL_DRV_INT;
diff --git a/erts/doc/src/driver_entry.xml b/erts/doc/src/driver_entry.xml
index dfddbb18ea..8bdd154cb9 100644
--- a/erts/doc/src/driver_entry.xml
+++ b/erts/doc/src/driver_entry.xml
@@ -121,7 +121,7 @@ typedef struct erl_drv_entry {
the port */
void (*ready_input)(ErlDrvData drv_data, ErlDrvEvent event);
/* called when we have input from one of
- the driver's handles) */
+ the driver's handles */
void (*ready_output)(ErlDrvData drv_data, ErlDrvEvent event);
/* called when output is possible to one of
the driver's handles */
@@ -133,7 +133,7 @@ typedef struct erl_drv_entry {
int (*control)(ErlDrvData drv_data, unsigned int command, char *buf,
int len, char **rbuf, int rlen);
/* "ioctl" for drivers - invoked by
- port_control/3) */
+ port_control/3 */
void (*timeout)(ErlDrvData drv_data); /* Handling of timeout in driver */
void (*outputv)(ErlDrvData drv_data, ErlIOVec *ev);
/* called when we have output from erlang
@@ -146,7 +146,7 @@ typedef struct erl_drv_entry {
before 'stop' can be called */
int (*call)(ErlDrvData drv_data, unsigned int command, char *buf,
int len, char **rbuf, int rlen, unsigned int *flags);
- /* Works mostly like 'control', a syncronous
+ /* Works mostly like 'control', a synchronous
call into the driver. */
void (*event)(ErlDrvData drv_data, ErlDrvEvent event,
ErlDrvEventData event_data);
diff --git a/erts/doc/src/epmd.xml b/erts/doc/src/epmd.xml
index 474230cb38..8c3c1e5237 100644
--- a/erts/doc/src/epmd.xml
+++ b/erts/doc/src/epmd.xml
@@ -116,6 +116,16 @@
<p>These options are available when starting the actual name server. The name server is normally started automatically by the <c>erl</c> command (if not already available), but it can also be started at i.e. system start-up.</p>
<taglist>
+ <tag><c><![CDATA[-address List]]></c></tag>
+ <item>
+ <p>Let this instance of <c>epmd</c> listen only on the
+ comma-separated list of IP addresses and on the loopback address
+ (which is implicitely added to the list if it has not been
+ specified). This can also be set using the
+ <c><![CDATA[ERL_EPMD_ADDRESS]]></c> environment variable, see the
+ section <seealso marker="#environment_variables">Environment
+ variables</seealso> below.</p>
+ </item>
<tag><c><![CDATA[-port No]]></c></tag>
<item>
<p>Let this instance of epmd listen to another TCP port than
@@ -228,6 +238,15 @@
<marker id="environment_variables"></marker>
<title>Environment variables</title>
<taglist>
+ <tag><c><![CDATA[ERL_EPMD_ADDRESS]]></c></tag>
+ <item>
+ <p>This environment variable may be set to a comma-separated
+ list of IP addresses, in which case the <c>epmd</c> daemon
+ will listen only on the specified address(es) and on the
+ loopback address (which is implicitely added to the list if it
+ has not been specified). The default behaviour is to listen on
+ all available IP addresses.</p>
+ </item>
<tag><c><![CDATA[ERL_EPMD_PORT]]></c></tag>
<item>
<p>This environment variable can contain the port number epmd will use.
diff --git a/erts/doc/src/erl.xml b/erts/doc/src/erl.xml
index a66d273438..514ee5ffaf 100644
--- a/erts/doc/src/erl.xml
+++ b/erts/doc/src/erl.xml
@@ -1004,6 +1004,15 @@
add to the code path.
See <seealso marker="kernel:code">code(3)</seealso>.</p>
</item>
+ <tag><c><![CDATA[ERL_EPMD_ADDRESS]]></c></tag>
+ <item>
+ <p>This environment variable may be set to a comma-separated
+ list of IP addresses, in which case the
+ <seealso marker="epmd">epmd</seealso> daemon
+ will listen only on the specified address(es) and on the
+ loopback address (which is implicitely added to the list if it
+ has not been specified).</p>
+ </item>
<tag><c><![CDATA[ERL_EPMD_PORT]]></c></tag>
<item>
<p>This environment variable can contain the port number to use when
@@ -1016,6 +1025,49 @@
</section>
<section>
+ <marker id="configuration"></marker>
+ <title>Configuration</title>
+ <p>The standard Erlang/OTP system can be re-configured to change the default
+ behavior on start-up.</p>
+ <taglist>
+ <tag>The .erlang Start-up File</tag>
+ <item>
+ <p>When Erlang/OTP is started, the system searches for a file named .erlang
+ in the directory where Erlang/OTP is started. If not found, the user's home
+ directory is searched for an .erlang file.</p>
+ <p>If an .erlang file is found, it is assumed to contain valid Erlang expressions.
+ These expressions are evaluated as if they were input to the shell.</p>
+ <p>A typical .erlang file contains a set of search paths, for example:</p>
+ <code type="none"><![CDATA[
+ io:format("executing user profile in HOME/.erlang\n",[]).
+ code:add_path("/home/calvin/test/ebin").
+ code:add_path("/home/hobbes/bigappl-1.2/ebin").
+ io:format(".erlang rc finished\n",[]).
+ ]]></code>
+ </item>
+ <tag>user_default and shell_default</tag>
+ <item>
+ <p>Functions in the shell which are not prefixed by a module name are assumed
+ to be functional objects (Funs), built-in functions (BIFs), or belong to the
+ module user_default or shell_default.</p>
+ <p>To include private shell commands, define them in a module user_default and
+ add the following argument as the first line in the .erlang file.</p>
+ <code type="none"><![CDATA[
+ code:load_abs("..../user_default").
+ ]]></code>
+ </item>
+ <tag>erl</tag>
+ <item>
+ <p>If the contents of .erlang are changed and a private version of
+ user_default is defined, it is possible to customize the Erlang/OTP environment.
+ More powerful changes can be made by supplying command line arguments in the
+ start-up script erl. Refer to erl(1) and <seealso marker="init">init(3)</seealso>
+ for further information.</p>
+ </item>
+ </taglist>
+ </section>
+
+ <section>
<title>SEE ALSO</title>
<p><seealso marker="init">init(3)</seealso>,
<seealso marker="erl_prim_loader">erl_prim_loader(3)</seealso>,
diff --git a/erts/doc/src/erl_driver.xml b/erts/doc/src/erl_driver.xml
index 497a2fa01d..066a2a4b92 100644
--- a/erts/doc/src/erl_driver.xml
+++ b/erts/doc/src/erl_driver.xml
@@ -56,16 +56,16 @@
instance is connected to an Erlang port. Every port has a port
owner process. Communication with the port is normally done
through the port owner process.</p>
- <p>Most of the functions takes the <c>port</c> handle as an
+ <p>Most of the functions take the <c>port</c> handle as an
argument. This identifies the driver instance. Note that this
port handle must be stored by the driver, it is not given when
the driver is called from the emulator (see
<seealso marker="driver_entry#emulator">driver_entry</seealso>).</p>
- <p>Some of the functions takes a parameter of type
+ <p>Some of the functions take a parameter of type
<c>ErlDrvBinary</c>, a driver binary. It should be both
- allocated and freed by the caller. Using a binary directly avoid
+ allocated and freed by the caller. Using a binary directly avoids
one extra copying of data.</p>
- <p>Many of the output functions has a "header buffer", with
+ <p>Many of the output functions have a "header buffer", with
<c>hbuf</c> and <c>hlen</c> parameters. This buffer is sent as a
list before the binary (or list, depending on port mode) that is
sent. This is convenient when matching on messages received from
@@ -92,7 +92,7 @@
with SMP support without being rewritten if driver
level locking is used.</p>
<note>
- <p>It is assumed that drivers does not access other drivers. If
+ <p>It is assumed that drivers do not access other drivers. If
drivers should access each other they have to provide their own
mechanism for thread safe synchronization. Such "inter driver
communication" is strongly discouraged.</p>
@@ -113,12 +113,12 @@
call-backs may be made from different threads.</p>
</note>
<p>Most functions in this API are <em>not</em> thread-safe, i.e.,
- they may <em>not</em> be called from an arbitrary thread. Function
+ they may <em>not</em> be called from an arbitrary thread. Functions
that are not documented as thread-safe may only be called from
driver call-backs or function calls descending from a driver
call-back call. Note that driver call-backs may be called from
different threads. This, however, is not a problem for any
- functions in this API, since the emulator have control over
+ function in this API, since the emulator has control over
these threads.</p>
<note>
<p>Functions not explicitly documented as thread-safe are
@@ -155,10 +155,10 @@
more information.</p>
</item>
<tag>Output functions</tag>
- <item>With the output functions, the driver sends data back
+ <item>With the output functions, the driver sends data back to
the emulator. They will be received as messages by the port owner
process, see <c>open_port/2</c>. The vector function and the
- function taking a driver binary is faster, because that avoid
+ function taking a driver binary are faster, because they avoid
copying the data buffer. There is also a fast way of sending
terms from the driver, without going through the binary term
format.</item>
@@ -193,14 +193,14 @@
use functionality from the POSIX thread API or the Windows
native thread API.
</p>
- <p>The Erlang driver thread API only return error codes when it is
+ <p>The Erlang driver thread API only returns error codes when it is
reasonable to recover from an error condition. If it isn't reasonable
to recover from an error condition, the whole runtime system is
terminated. For example, if a create mutex operation fails, an error
code is returned, but if a lock operation on a mutex fails, the
whole runtime system is terminated.
</p>
- <p>Note that there exist no "condition variable wait with timeout" in
+ <p>Note that there exists no "condition variable wait with timeout" in
the Erlang driver thread API. This is due to issues with
<c>pthread_cond_timedwait()</c>. When the system clock suddenly
is changed, it isn't always guaranteed that you will wake up from
@@ -241,7 +241,7 @@
to give you better error reports.
</p>
</item>
- <tag>Adding / remove drivers</tag>
+ <tag>Adding / removing drivers</tag>
<item>A driver can add and later remove drivers.</item>
<tag>Monitoring processes</tag>
<item>A driver can monitor a process that does not own a port.</item>
@@ -262,7 +262,7 @@
could, under rare circumstances, mean that drivers have to
be slightly modified. If so, this will of course be documented.
<c>ERL_DRV_EXTENDED_MINOR_VERSION</c> will be incremented when
- new features are added. The runtime system use the minor version
+ new features are added. The runtime system uses the minor version
of the driver to determine what features to use.
The runtime system will refuse to load a driver if the major
versions differ, or if the major versions are equal and the
@@ -273,7 +273,7 @@
It can, however, not make sure that it isn't incompatible. Therefore,
when loading a driver that doesn't use the extended driver
interface, there is a risk that it will be loaded also when
- the driver is incompatible. When the driver use the extended driver
+ the driver is incompatible. When the driver uses the extended driver
interface, the emulator can verify that it isn't of an incompatible
driver version. You are therefore advised to use the extended driver
interface.</p>
@@ -309,7 +309,7 @@ typedef struct ErlDrvSysInfo {
<seealso marker="#driver_system_info">driver_system_info()</seealso>
will write the system information when passed a reference to
a <c>ErlDrvSysInfo</c> structure. A description of the
- fields in the structure follow:
+ fields in the structure follows:
</p>
<taglist>
<tag><c>driver_major_version</c></tag>
@@ -347,14 +347,6 @@ typedef struct ErlDrvSysInfo {
<item>A value <c>!= 0</c> if the runtime system has SMP support;
otherwise, <c>0</c>.
</item>
- <tag><c>thread_support</c></tag>
- <item>A value <c>!= 0</c> if the runtime system has thread support;
- otherwise, <c>0</c>.
- </item>
- <tag><c>smp_support</c></tag>
- <item>A value <c>!= 0</c> if the runtime system has SMP support;
- otherwise, <c>0</c>.
- </item>
<tag><c>async_threads</c></tag>
<item>The number of async threads in the async thread pool used
by <seealso marker="#driver_async">driver_async()</seealso>
@@ -401,8 +393,8 @@ typedef struct ErlDrvBinary {
<seealso marker="#driver_binary_dec_refc">driver_binary_dec_refc()</seealso>.</p>
</note>
<p>Some driver calls, such as <c>driver_enq_binary</c>,
- increments the driver reference count, and others, such as
- <c>driver_deq</c> decrements it.</p>
+ increment the driver reference count, and others, such as
+ <c>driver_deq</c> decrement it.</p>
<p>Using a driver binary instead of a normal buffer, is often
faster, since the emulator doesn't need to copy the data,
only the pointer is used.</p>
@@ -415,7 +407,7 @@ typedef struct ErlDrvBinary {
<c>driver_outputv</c> calls, and in the queue. Also the
driver call-back <seealso marker="driver_entry#outputv">outputv</seealso> uses driver
binaries.</p>
- <p>If the driver of some reason or another, wants to keep a
+ <p>If the driver for some reason or another, wants to keep a
driver binary around, in a static variable for instance, the
reference count should be incremented,
and the binary can later be freed in the <seealso marker="driver_entry#stop">stop</seealso> call-back, with
@@ -423,7 +415,7 @@ typedef struct ErlDrvBinary {
<p>Note that since a driver binary is shared by the driver and
the emulator, a binary received from the emulator or sent to
the emulator, must not be changed by the driver.</p>
- <p>From erts version 5.5 (OTP release R11B), orig_bytes is
+ <p>Since erts version 5.5 (OTP release R11B), orig_bytes is
guaranteed to be properly aligned for storage of an array of
doubles (usually 8-byte aligned).</p>
</item>
@@ -447,7 +439,7 @@ typedef struct ErlIOVec {
int vsize;
int size;
SysIOVec* iov;
- >ErlDrvBinary** binv;
+ ErlDrvBinary** binv;
} ErlIOVec;
</code>
<p>The I/O vector used by the emulator and drivers, is a list
@@ -495,17 +487,17 @@ typedef struct ErlIOVec {
Currently, the only port specific data that the emulator
associates with the port data lock is the driver queue.</p>
<p>Normally a driver instance does not have a port data lock. If
- the driver instance want to use a port data lock, it has to
+ the driver instance wants to use a port data lock, it has to
create the port data lock by calling
<seealso marker="#driver_pdl_create">driver_pdl_create()</seealso>.
<em>NOTE</em>: Once the port data lock has been created, every
- access to data associated with the port data lock have to be done
+ access to data associated with the port data lock has to be done
while having the port data lock locked. The port data lock is
locked, and unlocked, respectively, by use of
<seealso marker="#driver_pdl_lock">driver_pdl_lock()</seealso>, and
<seealso marker="#driver_pdl_unlock">driver_pdl_unlock()</seealso>.</p>
<p>A port data lock is reference counted, and when the reference
- count reach zero, it will be destroyed. The emulator will at
+ count reaches zero, it will be destroyed. The emulator will at
least increment the reference count once when the lock is
created and decrement it once when the port associated with
the lock terminates. The emulator will also increment the
@@ -545,7 +537,7 @@ typedef struct ErlIOVec {
</p>
<taglist>
<tag>suggested_stack_size</tag>
- <item>A suggestion, in kilo-words, on how large stack to use. A value less
+ <item>A suggestion, in kilo-words, on how large a stack to use. A value less
than zero means default size.
</item>
</taglist>
@@ -648,7 +640,7 @@ typedef struct ErlIOVec {
opened.</p>
<p>The data is queued in the port owner process' message
queue. Note that this does not yield to the emulator. (Since
- the driver and the emulator runs in the same thread.)</p>
+ the driver and the emulator run in the same thread.)</p>
<p>The parameter <c>buf</c> points to the data to send, and
<c>len</c> is the number of bytes.</p>
<p>The return value for all output functions is 0. (Unless the
@@ -749,7 +741,7 @@ typedef struct ErlIOVec {
function <seealso marker="driver_entry#emulator">timeout</seealso> is called.</p>
<p>Note that there is only one timer on each driver instance;
setting a new timer will replace an older one.</p>
- <p>Return value i 0 (-1 only when the <c>timeout</c> driver
+ <p>Return value is 0 (-1 only when the <c>timeout</c> driver
function is <c>NULL</c>).</p>
</desc>
</func>
@@ -799,20 +791,20 @@ typedef struct ErlIOVec {
event object must be a socket or pipe (or other object that
<c>select</c>/<c>poll</c> can use).
On windows, the Win32 API function <c>WaitForMultipleObjects</c>
- is used. This places other restriction on the event object.
+ is used. This places other restrictions on the event object.
Refer to the Win32 SDK documentation.</p>
<p>The <c>on</c> parameter should be <c>1</c> for setting events
and <c>0</c> for clearing them.</p>
- <p>The <c>mode</c> argument is bitwise-or combination of
+ <p>The <c>mode</c> argument is a bitwise-or combination of
<c>ERL_DRV_READ</c>, <c>ERL_DRV_WRITE</c> and <c>ERL_DRV_USE</c>.
- The first two specifies whether to wait for read events and/or write
+ The first two specify whether to wait for read events and/or write
events. A fired read event will call
<seealso marker="driver_entry#ready_input">ready_input</seealso>
while a fired write event will call
<seealso marker="driver_entry#ready_output">ready_output</seealso>.
</p>
<note>
- <p>Some OS (Windows) does not differ between read and write events.
+ <p>Some OS (Windows) do not differentiate between read and write events.
The call-back for a fired event then only depends on the value of <c>mode</c>.</p>
</note>
<p><c>ERL_DRV_USE</c> specifies if we are using the event object or if we want to close it.
@@ -834,9 +826,9 @@ typedef struct ErlIOVec {
as before. But it is recommended to update them to use <c>ERL_DRV_USE</c> and
<c>stop_select</c> to make sure that event objects are closed in a safe way.</p>
</note>
- <p>The return value is 0 (Failure, -1, only if the
+ <p>The return value is 0 (failure, -1, only if the
<c>ready_input</c>/<c>ready_output</c> is
- <c>NULL</c>.</p>
+ <c>NULL</c>).</p>
</desc>
</func>
<func>
@@ -1076,7 +1068,7 @@ typedef struct ErlIOVec {
array of <c>SysIOVec</c>s. It also returns the number of
elements in <c>vlen</c>. This is the only way to get data
out of the queue.</p>
- <p>Nothing is remove from the queue by this function, that must be done
+ <p>Nothing is removed from the queue by this function, that must be done
with <c>driver_deq</c>.</p>
<p>The returned array is suitable to use with the Unix system
call <c>writev</c>.</p>
@@ -1209,7 +1201,7 @@ typedef struct ErlIOVec {
<fsummary>Stop monitoring a process from a driver</fsummary>
<desc>
<marker id="driver_demonitor_process"></marker>
- <p>This function cancels an monitor created earlier. </p>
+ <p>This function cancels a monitor created earlier. </p>
<p>The function returns 0 if a monitor was removed and &gt; 0
if the monitor did no longer exist.</p>
</desc>
@@ -1326,7 +1318,7 @@ typedef struct ErlIOVec {
<p>This function signals to erlang that the driver has
encountered an EOF and should be closed, unless the port was
opened with the <c>eof</c> option, in that case eof is sent
- to the port. Otherwise, the port is close and an
+ to the port. Otherwise, the port is closed and an
<c>'EXIT'</c> message is sent to the port owner process.</p>
<p>The return value is 0.</p>
</desc>
@@ -1349,8 +1341,8 @@ typedef struct ErlIOVec {
(<c>driver_failure</c>).</p>
<p>The driver should fail only when in severe error situations,
when the driver cannot possibly keep open, for instance
- buffer allocation gets out of memory. Normal errors is more
- appropriate to handle with sending error codes with
+ buffer allocation gets out of memory. For normal errors
+ it is more appropriate to send error codes with
<c>driver_output</c>.</p>
<p>The return value is 0.</p>
</desc>
@@ -1371,7 +1363,7 @@ typedef struct ErlIOVec {
<p>This function returns the process id of the process that
made the current call to the driver. The process id can be
used with <c>driver_send_term</c> to send back data to the
- caller. <c>driver_caller()</c> only return valid data
+ caller. <c>driver_caller()</c> only returns valid data
when currently executing in one of the following driver
callbacks:</p>
<taglist>
@@ -1409,7 +1401,7 @@ typedef struct ErlIOVec {
tuple, the elements are given first, and then the tuple
term, with a count. Likewise for lists.</p>
<p>A tuple must be specified with the number of elements. (The
- elements precedes the <c>ERL_DRV_TUPLE</c> term.)</p>
+ elements precede the <c>ERL_DRV_TUPLE</c> term.)</p>
<p>A list must be specified with the number of elements,
including the tail, which is the last term preceding
<c>ERL_DRV_LIST</c>.</p>
@@ -1518,7 +1510,7 @@ ERL_DRV_EXT2TERM char *buf, ErlDrvUInt len
};
driver_output_term(port, spec, sizeof(spec) / sizeof(spec[0]));
]]></code>
- <p>If you want to pass a binary and doesn't already have the content
+ <p>If you want to pass a binary and don't already have the content
of the binary in an <c>ErlDrvBinary</c>, you can benefit from using
<c>ERL_DRV_BUF2BINARY</c> instead of creating an <c>ErlDrvBinary</c>
via <c>driver_alloc_binary()</c> and then pass the binary via
@@ -1565,7 +1557,7 @@ ERL_DRV_EXT2TERM char *buf, ErlDrvUInt len
<em>other</em> processes than the port owner process. The
<c>receiver</c> parameter specifies the process to receive
the data.</p>
- <p>The parameters <c>term</c> and <c>n</c> does the same thing
+ <p>The parameters <c>term</c> and <c>n</c> do the same thing
as in <seealso marker="#driver_output_term">driver_output_term</seealso>.</p>
<p>This function is only thread-safe when the emulator with SMP
support is used.</p>
@@ -1660,7 +1652,7 @@ ERL_DRV_EXT2TERM char *buf, ErlDrvUInt len
<desc>
<marker id="driver_lock_driver"></marker>
<p>This function locks the driver used by the port <c>port</c>
- in memory for the rest of the emulator process
+ in memory for the rest of the emulator process'
lifetime. After this call, the driver behaves as one of Erlang's
statically linked in drivers.</p>
</desc>
@@ -1904,7 +1896,7 @@ ERL_DRV_EXT2TERM char *buf, ErlDrvUInt len
corresponding to one of the involved thread identifiers
has terminated since the thread identifier was saved,
the result of <c>erl_drv_equal_tids()</c> might not give
- expected result.
+ the expected result.
</p></note>
<p>This function is thread-safe.</p>
</desc>
diff --git a/erts/doc/src/erl_nif.xml b/erts/doc/src/erl_nif.xml
index 4bbd4e2a54..cdce4ec0b8 100644
--- a/erts/doc/src/erl_nif.xml
+++ b/erts/doc/src/erl_nif.xml
@@ -688,6 +688,10 @@ typedef enum {
<fsummary>Determine if a term is an empty list</fsummary>
<desc><p>Return true if <c>term</c> is an empty list.</p></desc>
</func>
+ <marker id="enif_is_exception"/><func><name><ret>int</ret><nametext>enif_is_exception(ErlNifEnv* env, ERL_NIF_TERM term)</nametext></name>
+ <fsummary>Determine if a term is an exception</fsummary>
+ <desc><p>Return true if <c>term</c> is an exception.</p></desc>
+ </func>
<func><name><ret>int</ret><nametext>enif_is_fun(ErlNifEnv* env, ERL_NIF_TERM term)</nametext></name>
<fsummary>Determine if a term is a fun</fsummary>
<desc><p>Return true if <c>term</c> is a fun.</p></desc>
@@ -738,7 +742,14 @@ typedef enum {
</func>
<func><name><ret>ERL_NIF_TERM</ret><nametext>enif_make_badarg(ErlNifEnv* env)</nametext></name>
<fsummary>Make a badarg exception.</fsummary>
- <desc><p>Make a badarg exception to be returned from a NIF.</p></desc>
+ <desc><p>Make a badarg exception to be returned from a NIF, and set
+ an associated exception reason in <c>env</c>. If
+ <c>enif_make_badarg</c> is called, the term it returns <em>must</em>
+ be returned from the function that called it. No other return value
+ is allowed. Also, the term returned from <c>enif_make_badarg</c> may
+ be passed only to
+ <seealso marker="#enif_is_exception">enif_is_exception</seealso> and
+ not to any other NIF API function.</p></desc>
</func>
<func><name><ret>ERL_NIF_TERM</ret><nametext>enif_make_binary(ErlNifEnv* env, ErlNifBinary* bin)</nametext></name>
<fsummary>Make a binary term.</fsummary>
diff --git a/erts/doc/src/init.xml b/erts/doc/src/init.xml
index 33364c709a..0e828389f6 100644
--- a/erts/doc/src/init.xml
+++ b/erts/doc/src/init.xml
@@ -67,19 +67,6 @@
</desc>
</func>
<func>
- <name>get_args() -> [Arg]</name>
- <fsummary>Get all non-flag command line arguments</fsummary>
- <type>
- <v>Arg = atom()</v>
- </type>
- <desc>
- <p>Returns any plain command line arguments as a list of atoms
- (possibly empty). It is recommended that
- <c>get_plain_arguments/1</c> is used instead, because of
- the limited length of atoms.</p>
- </desc>
- </func>
- <func>
<name>get_argument(Flag) -> {ok, Arg} | error</name>
<fsummary>Get the values associated with a command line user flag</fsummary>
<type>
diff --git a/erts/doc/src/notes.xml b/erts/doc/src/notes.xml
index 102fa43c1f..f5607945a8 100644
--- a/erts/doc/src/notes.xml
+++ b/erts/doc/src/notes.xml
@@ -30,6 +30,55 @@
</header>
<p>This document describes the changes made to the ERTS application.</p>
+<section><title>Erts 5.8.3.2</title>
+
+ <section><title>Known Bugs and Problems</title>
+ <list>
+ <item>
+ <p>
+ Fix halfword emulator bug in <c>ets:select_delete</c> for
+ <c>ordered_set</c> that caused emulator to crash.</p>
+ <p>
+ Own Id: OTP-9258 Aux Id: seq11836 </p>
+ </item>
+ </list>
+ </section>
+
+</section>
+
+<section><title>Erts 5.8.3.1</title>
+
+ <section><title>Fixed Bugs and Malfunctions</title>
+ <list>
+ <item>
+ <p>
+ Ets table type ordered_set could order large integer keys
+ wrongly on pure 64bit platforms. This is now corrected.</p>
+ <p>
+ Own Id: OTP-9181</p>
+ </item>
+ <item>
+ <p>
+ The status of a process was unnecessarily set to waiting
+ before a process was enqueued in a run queue. This bug
+ was harmless up until OTP-R14B01. In OTP-R14B02
+ <c>erlang:hibernate/3</c> was fixed (OTP-9125). After the
+ introduction of OTP-9125, the previously harmless process
+ status bug sometimes caused erroneous badarg exceptions
+ from <c>process_info()</c>.</p>
+ <p>
+ OTP-9125 also introduced a thread unsafe access to the
+ status field of a process which now also have been fixed.</p>
+ <p>
+ *** INCOMPATIBILITY with noxs ***</p>
+ <p>
+ Own Id: OTP-9197</p>
+ </item>
+ </list>
+ </section>
+
+</section>
+
<section><title>Erts 5.8.3</title>
<section><title>Fixed Bugs and Malfunctions</title>
diff --git a/erts/doc/src/run_erl.xml b/erts/doc/src/run_erl.xml
index 7bf7f559c5..da08859c7b 100644
--- a/erts/doc/src/run_erl.xml
+++ b/erts/doc/src/run_erl.xml
@@ -144,6 +144,14 @@
<item>The size (in bytes) of a log file before switching to a
new log file. Default is 100000, minimum is 1000 and maximum is
approximately 2^30.</item>
+ <tag>RUN_ERL_DISABLE_FLOWCNTRL</tag>
+ <item>If defined, disables input and output flow control for the pty opend by run_erl.
+ Useful if you want to remove any risk of accidentally blocking the flow control
+ by hit Ctrl-S (instead of Ctrl-D to detach).
+ Which may result in blocking of the entire beam process
+ and in the case of running heart as supervisor
+ even the heart process will be blocked when writing log message to terminal.
+ Leaving the heart process unable to do its work.</item>
</taglist>
</section>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 20:43:40 +0000