diff options
Diffstat (limited to 'erts/emulator/beam/benchmark.h')
| -rw-r--r-- | erts/emulator/beam/benchmark.h | 295 |
1 files changed, 0 insertions, 295 deletions
diff --git a/erts/emulator/beam/benchmark.h b/erts/emulator/beam/benchmark.h deleted file mode 100644 index 0272896f4f..0000000000 --- a/erts/emulator/beam/benchmark.h +++ /dev/null @@ -1,295 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 2002-2016. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -#ifndef __BENCHMARK_H__ -#define __BENCHMARK_H__ - -/* The define __BENCHMARK__ is the master switch to turn on and off - * benchmarking. This will enable the benchmark-BIFs in hipe_bif1.c. - * Documentation for the BIFs is in hipe_bif1.c, and that is where you - * will find the information about how to accually get some data out - * from these timers and counters. - */ -/* #define __BENCHMARK__ */ - -#ifdef __BENCHMARK__ -/* - * The defines below enables different parts of the benchmaring. - * Counters and timers that are disabled, always report zero in - * the BIFs. - */ - -/* BM_TIMERS keeps track of the time spent in diferent parts of the - * system. It only measures accual active time, not time spent in idle - * mode. Currently, the Solaris hrtime_t will be used. - * To add new timers look below. - */ -#define BM_TIMERS - -/* BM_COUNTERS count all kinds of events that occurs in the system. - * Among other things it counts the number of messages, then number of - * garbage collections, the number of processes spawned etc. - * To add new counters look below. - */ -#define BM_COUNTERS - -/* BM_MESSAGE_SIZES keeps a log of the size of all messages sent in - * the system. This introduce an overhead in time for the shared heap - * system since all message sizes have to be calculated at send. - */ -/* #define BM_MESSAGE_SIZES */ - -/* BM_HEAP_SIZES goes through all processes at garbage collection time - * to sum their allocated and used heap sizes. In anything else than a - * shared heap system, this will cost. - */ -/* #define BM_HEAP_SIZES */ - -/* BM_STATISTICS saves an entry in the file BM_STATISTICS_FILE. This - * is done for each erlang node at exit time. - */ -/* #define BM_STATISTICS */ - -#endif /* __BENCHMARK__ */ - - -#ifdef BM_STATISTICS -# define BM_STATISTICS_FILE "/tmp/erlang_statistics.joppe.log" -#endif /* BM_STATISTICS */ - - -/************ There are no more settings below this line *************/ - -/* - * Maintenance and how to add new stuff is documented by the code - * below ;-) - */ - -#ifdef BM_COUNTERS -/********************************************************************* - * To add new counters: - * - * Add the variable here AND in benchmark.c. Use the macro - * BM_COUNT(var) in the code where you want to increase it. - * - */ -extern unsigned long long processes_busy; -extern unsigned long long processes_spawned; -extern unsigned long long messages_sent; -extern unsigned long long messages_copied; -extern unsigned long long messages_ego; -extern unsigned long long minor_gc; -extern unsigned long long major_gc; - -#define BM_COUNT(var) (var)++; - -#define BM_EGO_COUNT(send,rec) { \ - if ((send) == (rec)) \ - BM_COUNT(messages_ego); } - -#define BM_LAZY_COPY_START long long gcs = minor_global_gc + major_global_gc; -#define BM_LAZY_COPY_STOP { gcs = (minor_global_gc + major_global_gc) - gcs; \ - if (gcs > gc_in_copy) gc_in_copy = gcs; } - -#else /* !BM_COUNTERS */ -# define BM_COUNT(var) -# define BM_EGO_COUNT(send,rec) -# define BM_LAZY_COPY_START -# define BM_LAZY_COPY_STOP -#endif /* BM_COUNTERS */ - - -#ifdef BM_TIMERS -/********************************************************************* - * To add new timers: - * - * Add the variable below using the form extern BM_TIMER_T blah_time. - * Also add them in benchmark.c using the macro NEW_TIMER(blah). Use - * the macro BM_SWAP_TIMER(from,blah) ... BM_SWAP_TIMER(blah,to) to - * start and stop the new timer. Note, that you have to know what - * timer is running at the place where you want to insert your new - * timer to be able to stop and start (from,to) it. - * - * You can use the macros BM_STOP_TIMER(blah) and BM_START_TIMER(blah) - * around code that should not be timed at all. As above, you have to - * know what timer to start and stop. The system timer is running at - * most places in the emulator. Only the garbage collector and the - * message sending has its own timers at the moment. - * - * The timer_time used when stopping timers is the time it takes to - * start and stop the timers, calculated in init_benchmarking(). If it - * is not there, the time it takes to do this will accually be - * substantial compared to some small times in the system we want to - * meassure (send time in shared heap for instance). - */ - -/* (Assuming Solaris) */ - -#define BM_TIMER_T ErtsMonotonicTime -#define BM_START_TIMER(t) system_clock = ERTS_MONOTONIC_TO_NSEC(erts_os_monotonic_time()) -#define BM_STOP_TIMER(t) do { \ - BM_TIMER_T tmp = (ERTS_MONOTONIC_TO_NSEC(erts_os_monotonic_time()) - system_clock) - timer_time; \ - t##_time += (tmp > 0 ? tmp : 0); \ -} while(0) - -#define BM_TIME_PRINTER(str,time) do { \ - int min,sec,milli,micro; \ - BM_TIMER_T tmp; \ - tmp = (time) / 1000; \ - micro = tmp % 1000; \ - tmp /= 1000; \ - milli = tmp % 1000; \ - tmp /= 1000; \ - sec = tmp % 60; \ - min = tmp / 60; \ - erts_fprintf(file,str": %d:%02d.%03d %03d\n",min,sec,milli,micro); \ -} while(0) - -extern BM_TIMER_T system_clock; - -extern BM_TIMER_T timer_time; -extern BM_TIMER_T system_time; -extern BM_TIMER_T gc_time; -extern BM_TIMER_T minor_gc_time; -extern BM_TIMER_T major_gc_time; -extern BM_TIMER_T minor_global_gc_time; -extern BM_TIMER_T major_global_gc_time; -extern BM_TIMER_T send_time; -extern BM_TIMER_T copy_time; -extern BM_TIMER_T size_time; -extern BM_TIMER_T max_minor_time; -extern BM_TIMER_T max_major_time; -extern BM_TIMER_T max_global_minor_time; -extern BM_TIMER_T max_global_major_time; -extern BM_TIMER_T misc0_time; -extern BM_TIMER_T misc1_time; -extern BM_TIMER_T misc2_time; - -#define MAX_PAUSE_TIME 500000 -extern unsigned long local_pause_times[MAX_PAUSE_TIME]; -extern unsigned long pause_times[MAX_PAUSE_TIME]; -extern unsigned long pause_times_old[MAX_PAUSE_TIME]; - -#define MMU_INTERVAL 5 /* milli seconds */ -extern BM_TIMER_T mmu_counter; -extern BM_TIMER_T mmu; - -#define BM_NEW_TIMER(t) BM_TIMER_T t##_time = 0; -#define BM_RESET_TIMER(t) t##_time = 0; -#define BM_SWAP_TIMER(t1,t2) do { BM_STOP_TIMER(t1); BM_START_TIMER(t2); } while(0) -#define BM_MMU_INIT() do { \ - BM_TIMER_T gc = gc_time; \ - while (gc > 0) { \ - if (gc > MMU_INTERVAL) { \ - gc -= MMU_INTERVAL - mmu_counter; \ - erts_printf("%d\n",(int)((mmu / MMU_INTERVAL) * 100)); \ - mmu_counter = 0; mmu = 0; \ - } else { \ - mmu_counter += gc; \ - if (mmu_counter >= MMU_INTERVAL) { \ - mmu_counter -= MMU_INTERVAL; \ - erts_printf("%d\n",(int)((mmu / MMU_INTERVAL) * 100)); \ - mmu = 0; \ - } \ - gc = 0; \ - } \ - } \ - BM_RESET_TIMER(system); \ - BM_RESET_TIMER(send); \ - BM_RESET_TIMER(copy); \ - BM_RESET_TIMER(size); \ -} while(0) - -#define BM_MMU_READ() do { \ - BM_TIMER_T mut = system_time + send_time + copy_time + size_time; \ - while (mut > 0) { \ - if (mut > MMU_INTERVAL) { \ - BM_TIMER_T tmp = MMU_INTERVAL - mmu_counter; \ - mmu += tmp; mut -= tmp; \ - erts_printf("%d\n",(int)((mmu / MMU_INTERVAL) * 100)); \ - mmu_counter = 0; mmu = 0; \ - } else { \ - mmu_counter += mut; mmu += mut; \ - if (mmu_counter >= MMU_INTERVAL) { \ - mmu_counter -= MMU_INTERVAL; \ - mmu -= mmu_counter; \ - erts_printf("%d\n",(int)((mmu / MMU_INTERVAL) * 100)); \ - mmu = mmu_counter; \ - } \ - mut = 0; \ - } \ - } \ -} while(0) - -#else /* !BM_TIMERS */ -# define BM_NEW_TIMER(t) -# define BM_START_TIMER(t) -# define BM_STOP_TIMER(t) -# define BM_RESET_TIMER(t) -# define BM_SWAP_TIMER(t1,t2) -# define BM_TIME_PRINTER(str,time) -# define BM_MMU_INIT() -# define BM_MMU_READ() -#endif /* BM_TIMERS */ - -#ifdef BM_HEAP_SIZES -extern unsigned long long max_used_heap; -extern unsigned long long max_allocated_heap; -extern unsigned long long max_used_global_heap; -extern unsigned long long max_allocated_global_heap; -#endif /* BM_HEAP_SIZES */ - -#ifdef BM_MESSAGE_SIZES -extern unsigned long long words_sent; -extern unsigned long long words_copied; -extern unsigned long long words_prealloc; -extern unsigned long long message_sizes[1000]; - -#define BM_MESSAGE_COPIED(size) { \ - words_copied += size; \ - BM_COUNT(messages_copied); } - -#define BM_PREALLOC_DATA(size) { \ - words_prealloc += size; } - -#define BM_MESSAGE(mess,send,rec) { \ - Uint msize = size_object(mess); \ - words_sent += msize; \ - if (msize < 1000) \ - message_sizes[msize]++; \ - else \ - message_sizes[999]++; \ - BM_EGO_COUNT(send,rec); \ - BM_COUNT(messages_sent); } - -#else /* !BM_MESSAGE_SIZES */ - -#define BM_MESSAGE_COPIED(size) BM_COUNT(messages_copied); -#define BM_PREALLOC_DATA(size) -#define BM_MESSAGE(mess,send,rec) { \ - BM_EGO_COUNT(send,rec); \ - BM_COUNT(messages_sent); } - -#endif /* BM_MESSAGE_SIZES */ - -void init_benchmarking(void); -void save_statistics(void); - -#endif /* _BENCHMARK_H_ */ |