diff options
Diffstat (limited to 'erts/emulator/drivers/unix')
| -rw-r--r-- | erts/emulator/drivers/unix/ttsl_drv.c | 178 |
1 files changed, 159 insertions, 19 deletions
diff --git a/erts/emulator/drivers/unix/ttsl_drv.c b/erts/emulator/drivers/unix/ttsl_drv.c index 491e0a090e..a5960716f2 100644 --- a/erts/emulator/drivers/unix/ttsl_drv.c +++ b/erts/emulator/drivers/unix/ttsl_drv.c @@ -32,6 +32,10 @@ static ErlDrvData ttysl_start(ErlDrvPort, char*); #ifdef HAVE_TERMCAP /* else make an empty driver that can not be opened */ +#ifndef WANT_NONBLOCKING +#define WANT_NONBLOCKING +#endif + #include "sys.h" #include <ctype.h> #include <stdlib.h> @@ -39,6 +43,7 @@ static ErlDrvData ttysl_start(ErlDrvPort, char*); #include <string.h> #include <signal.h> #include <fcntl.h> +#include <limits.h> #include <locale.h> #include <unistd.h> #include <termios.h> @@ -57,6 +62,14 @@ static ErlDrvData ttysl_start(ErlDrvPort, char*); #include <langinfo.h> #endif +#if defined IOV_MAX +#define MAXIOV IOV_MAX +#elif defined UIO_MAXIOV +#define MAXIOV UIO_MAXIOV +#else +#define MAXIOV 16 +#endif + #define TRUE 1 #define FALSE 0 @@ -80,12 +93,15 @@ static volatile int cols_needs_update = FALSE; #define OP_INSC 2 #define OP_DELC 3 #define OP_BEEP 4 +#define OP_PUTC_SYNC 5 /* Control op */ #define CTRL_OP_GET_WINSIZE 100 #define CTRL_OP_GET_UNICODE_STATE 101 #define CTRL_OP_SET_UNICODE_STATE 102 - +/* We use 1024 as the buf size as that was the default buf size of FILE streams + on all platforms that I checked. */ +#define TTY_BUFFSIZE 1024 static int lbuf_size = BUFSIZ; static Uint32 *lbuf; /* The current line buffer */ @@ -113,13 +129,19 @@ static int lpos; /* The current "cursor position" in the line buf /* Main interface functions. */ static void ttysl_stop(ErlDrvData); static void ttysl_from_erlang(ErlDrvData, char*, ErlDrvSizeT); +static void ttysl_to_tty(ErlDrvData, ErlDrvEvent); +static void ttysl_flush_tty(ErlDrvData); static void ttysl_from_tty(ErlDrvData, ErlDrvEvent); static void ttysl_stop_select(ErlDrvEvent, void*); static Sint16 get_sint16(char*); static ErlDrvPort ttysl_port; static int ttysl_fd; -static FILE *ttysl_out; +static int ttysl_terminate = 0; +static int ttysl_send_ok = 0; +static ErlDrvBinary *putcbuf; +static int putcpos; +static int putclen; /* Functions that work on the line buffer. */ static int start_lbuf(void); @@ -201,22 +223,22 @@ struct erl_drv_entry ttsl_driver_entry = { IF_IMPL(ttysl_stop), IF_IMPL(ttysl_from_erlang), IF_IMPL(ttysl_from_tty), - NULL, - "tty_sl", - NULL, - NULL, + IF_IMPL(ttysl_to_tty), + "tty_sl", /* driver_name */ + NULL, /* finish */ + NULL, /* handle */ IF_IMPL(ttysl_control), NULL, /* timeout */ NULL, /* outputv */ NULL, /* ready_async */ - NULL, /* flush */ + IF_IMPL(ttysl_flush_tty), NULL, /* call */ NULL, /* event */ ERL_DRV_EXTENDED_MARKER, ERL_DRV_EXTENDED_MAJOR_VERSION, ERL_DRV_EXTENDED_MINOR_VERSION, 0, /* ERL_DRV_FLAGs */ - NULL, + NULL, /* handle2 */ NULL, /* process_exit */ IF_IMPL(ttysl_stop_select) }; @@ -296,8 +318,7 @@ static ErlDrvData ttysl_start(ErlDrvPort port, char* buf) return ERL_DRV_ERROR_GENERAL; } - /* Open the terminal and set the terminal */ - ttysl_out = fdopen(ttysl_fd, "w"); + SET_NONBLOCKING(ttysl_fd); #ifdef PRIMITIVE_UTF8_CHECK setlocale(LC_CTYPE, ""); /* Set international environment, @@ -317,8 +338,8 @@ static ErlDrvData ttysl_start(ErlDrvPort port, char* buf) } #endif DEBUGLOG(("utf8_mode is %s\n",(utf8_mode) ? "on" : "off")); - sys_sigset(SIGCONT, cont); - sys_sigset(SIGWINCH, winch); + sys_signal(SIGCONT, cont); + sys_signal(SIGWINCH, winch); driver_select(port, (ErlDrvEvent)(UWord)ttysl_fd, ERL_DRV_READ|ERL_DRV_USE, 1); ttysl_port = port; @@ -400,12 +421,14 @@ static void ttysl_stop(ErlDrvData ttysl_data) stop_lbuf(); stop_termcap(); tty_reset(ttysl_fd); - driver_select(ttysl_port, (ErlDrvEvent)(UWord)ttysl_fd, ERL_DRV_READ|ERL_DRV_USE, 0); - sys_sigset(SIGCONT, SIG_DFL); - sys_sigset(SIGWINCH, SIG_DFL); + driver_select(ttysl_port, (ErlDrvEvent)(UWord)ttysl_fd, + ERL_DRV_WRITE|ERL_DRV_READ|ERL_DRV_USE, 0); + sys_signal(SIGCONT, SIG_DFL); + sys_signal(SIGWINCH, SIG_DFL); } ttysl_port = (ErlDrvPort)-1; ttysl_fd = -1; + ttysl_terminate = 0; /* return TRUE; */ } @@ -650,10 +673,26 @@ static int check_buf_size(byte *s, int n) static void ttysl_from_erlang(ErlDrvData ttysl_data, char* buf, ErlDrvSizeT count) { + ErlDrvSizeT sz; + + sz = driver_sizeq(ttysl_port); + + putclen = count > TTY_BUFFSIZE ? TTY_BUFFSIZE : count; + putcbuf = driver_alloc_binary(putclen); + putcpos = 0; + if (lpos > MAXSIZE) put_chars((byte*)"\n", 1); switch (buf[0]) { + case OP_PUTC_SYNC: + /* Using sync means that we have to send an ok to the + controlling process for each command call. We delay + sending ok if the driver queue exceeds a certain size. + We do not set ourselves as a busy port, as this + could be very bad for user_drv, if it gets blocked on + the port_command. */ + /* fall through */ case OP_PUTC: DEBUGLOG(("OP: Putc(%lu)",(unsigned long) count-1)); if (check_buf_size((byte*)buf+1, count-1) == 0) @@ -678,10 +717,104 @@ static void ttysl_from_erlang(ErlDrvData ttysl_data, char* buf, ErlDrvSizeT coun /* Unknown op, just ignore. */ break; } - fflush(ttysl_out); + + driver_enq_bin(ttysl_port,putcbuf,0,putcpos); + + if (sz == 0) { + for (;;) { + int written, qlen; + SysIOVec *iov; + + iov = driver_peekq(ttysl_port,&qlen); + if (iov) + written = writev(ttysl_fd, iov, qlen > MAXIOV ? MAXIOV : qlen); + else + written = 0; + if (written < 0) { + if (errno == EAGAIN) { + driver_select(ttysl_port,(ErlDrvEvent)(long)ttysl_fd, + ERL_DRV_USE|ERL_DRV_WRITE,1); + break; + } else { + /* we ignore all other errors */ + break; + } + } else { + if (driver_deq(ttysl_port, written) == 0) + break; + } + } + } + + if (buf[0] == OP_PUTC_SYNC) { + if (driver_sizeq(ttysl_port) > TTY_BUFFSIZE && !ttysl_terminate) { + /* We delay sending the ack until the buffer has been consumed */ + ttysl_send_ok = 1; + } else { + ErlDrvTermData spec[] = { + ERL_DRV_PORT, driver_mk_port(ttysl_port), + ERL_DRV_ATOM, driver_mk_atom("ok"), + ERL_DRV_TUPLE, 2 + }; + ASSERT(ttysl_send_ok == 0); + erl_drv_output_term(driver_mk_port(ttysl_port), spec, + sizeof(spec) / sizeof(spec[0])); + } + } + return; /* TRUE; */ } +static void ttysl_to_tty(ErlDrvData ttysl_data, ErlDrvEvent fd) { + for (;;) { + int written, qlen; + SysIOVec *iov; + ErlDrvSizeT sz; + + iov = driver_peekq(ttysl_port,&qlen); + if (iov) + written = writev(ttysl_fd, iov, qlen > MAXIOV ? MAXIOV : qlen); + else + written = 0; + if (written < 0) { + if (errno == EAGAIN) { + break; + } else { + /* we ignore all other errors */ + } + } else { + sz = driver_deq(ttysl_port, written); + if (sz < TTY_BUFFSIZE && ttysl_send_ok) { + ErlDrvTermData spec[] = { + ERL_DRV_PORT, driver_mk_port(ttysl_port), + ERL_DRV_ATOM, driver_mk_atom("ok"), + ERL_DRV_TUPLE, 2 + }; + ttysl_send_ok = 0; + erl_drv_output_term(driver_mk_port(ttysl_port), spec, + sizeof(spec) / sizeof(spec[0])); + } + if (sz == 0) { + driver_select(ttysl_port,(ErlDrvEvent)(long)ttysl_fd, + ERL_DRV_WRITE,0); + if (ttysl_terminate) + /* flush has been called, which means we should terminate + when queue is empty. This will not send any exit + message */ + driver_failure_atom(ttysl_port, "normal"); + break; + } + } + } + + return; +} + +static void ttysl_flush_tty(ErlDrvData ttysl_data) { + ttysl_terminate = 1; + return; +} + static void ttysl_from_tty(ErlDrvData ttysl_data, ErlDrvEvent fd) { byte b[1024]; @@ -1070,7 +1203,14 @@ static int write_buf(Uint32 *s, int n) /* The basic procedure for outputting one character. */ static int outc(int c) { - return (int)putc(c, ttysl_out); + putcbuf->orig_bytes[putcpos++] = c; + if (putcpos == putclen) { + driver_enq_bin(ttysl_port,putcbuf,0,putclen); + putcpos = 0; + putclen = TTY_BUFFSIZE; + putcbuf = driver_alloc_binary(BUFSIZ); + } + return 1; } static int move_cursor(int from, int to) @@ -1318,11 +1458,11 @@ static RETSIGTYPE suspend(int sig) exit(1); } - sys_sigset(sig, SIG_DFL); /* Set signal handler to default */ + sys_signal(sig, SIG_DFL); /* Set signal handler to default */ sys_sigrelease(sig); /* Allow 'sig' to come through */ kill(getpid(), sig); /* Send ourselves the signal */ sys_sigblock(sig); /* Reset to old mask */ - sys_sigset(sig, suspend); /* Reset signal handler */ + sys_signal(sig, suspend); /* Reset signal handler */ if (tty_set(ttysl_fd) < 0) { fprintf(stderr,"Can't set tty raw \n"); |