diff options
Diffstat (limited to 'erts/emulator/hipe/hipe_mode_switch.c')
-rw-r--r-- | erts/emulator/hipe/hipe_mode_switch.c | 140 |
1 files changed, 111 insertions, 29 deletions
diff --git a/erts/emulator/hipe/hipe_mode_switch.c b/erts/emulator/hipe/hipe_mode_switch.c index 9243e029f6..ed95045292 100644 --- a/erts/emulator/hipe/hipe_mode_switch.c +++ b/erts/emulator/hipe/hipe_mode_switch.c @@ -2,7 +2,7 @@ * %CopyrightBegin% * - * Copyright Ericsson AB 2001-2014. All Rights Reserved. + * Copyright Ericsson AB 2001-2016. All Rights Reserved. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. @@ -59,6 +59,7 @@ * TODO: check PCB consistency at native BIF calls */ int hipe_modeswitch_debug = 0; +extern BeamInstr beam_exit[]; #define HIPE_DEBUG 0 @@ -173,6 +174,33 @@ void hipe_mode_switch_init(void) make_catch(beam_catches_cons(hipe_beam_pc_throw, BEAM_CATCHES_NIL)); hipe_mfa_info_table_init(); + +#if (defined(__i386__) || defined(__x86_64__)) && defined(__linux__) + /* Verify that the offset of c-p->hipe does not change. + The ErLLVM hipe backend depends on it being in a specific + position. Kostis et al has promised to fix this in upstream + llvm by OTP 20, so it should be possible to remove these asserts + after that. */ + ERTS_CT_ASSERT(sizeof(ErtsPTabElementCommon) == + (sizeof(Eterm) + /* id */ + sizeof(((ErtsPTabElementCommon*)0)->refc) + + sizeof(ErtsTracer) + /* tracer */ + sizeof(Uint) + /* trace_flags */ + sizeof(erts_smp_atomic_t) + /* timer */ + sizeof(((ErtsPTabElementCommon*)0)->u))); + + ERTS_CT_ASSERT(offsetof(Process, hipe) == + (sizeof(ErtsPTabElementCommon) + /* common */ + sizeof(Eterm*) + /* htop */ + sizeof(Eterm*) + /* stop */ + sizeof(Eterm*) + /* heap */ + sizeof(Eterm*) + /* hend */ + sizeof(Uint) + /* heap_sz */ + sizeof(Uint) + /* min_heap_size */ + sizeof(Uint) + /* min_vheap_size */ + sizeof(volatile unsigned long))); /* fp_exception */ +#endif + } void hipe_set_call_trap(Uint *bfun, void *nfun, int is_closure) @@ -196,7 +224,7 @@ hipe_push_beam_trap_frame(Process *p, Eterm reg[], unsigned arity) ASSERT(!(p->flags & F_DISABLE_GC)); if ((p->stop - 2) < p->htop) { DPRINTF("calling gc to increase BEAM stack size"); - p->fcalls -= erts_garbage_collect(p, 2, reg, arity); + erts_garbage_collect(p, 2, reg, arity); ASSERT(!((p->stop - 2) < p->htop)); } p->stop -= 2; @@ -218,15 +246,37 @@ static __inline__ void hipe_pop_beam_trap_frame(Process *p) Process *hipe_mode_switch(Process *p, unsigned cmd, Eterm reg[]) { unsigned result; -#if NR_ARG_REGS > 5 - /* When NR_ARG_REGS > 5, we need to protect the process' input - reduction count (which BEAM stores in def_arg_reg[5]) from - being clobbered by the arch glue code. */ Eterm reds_in = p->def_arg_reg[5]; -#endif -#if NR_ARG_REGS > 4 - Eterm o_reds = p->def_arg_reg[4]; -#endif + /* + * Process is in the normal case scheduled out when reduction + * count reach zero. When "save calls" is enabled reduction + * count is subtracted with CONTEXT_REDS, i.e. initial reduction + * count will be zero or less and process is scheduled out + * when -CONTEXT_REDS is reached. + * + * HiPE does not support the "save calls" feature, so we switch + * to using a positive reduction counter when executing in + * hipe mode, but need to restore the "save calls" when + * returning to beam. We also need to hide the save calls buffer + * from BIFs. We do that by moving the saved calls buf to + * suspended saved calls buf. + * + * Beam has initial reduction count in stored in p->def_arg_reg[5]. + * + * Beam expects -neg_o_reds to be found in p->def_arg_reg[4] + * on return to beam. + */ + + { + struct saved_calls *scb = ERTS_PROC_SET_SAVED_CALLS_BUF(p, NULL); + if (scb) { + reds_in += CONTEXT_REDS; + p->fcalls += CONTEXT_REDS; + ERTS_PROC_SET_SUSPENDED_SAVED_CALLS_BUF(p, scb); + } + } + + p->flags |= F_HIPE_MODE; /* inform bifs where we are comming from... */ p->i = NULL; /* Set current_function to undefined. stdlib hibernate tests rely on it. */ @@ -481,12 +531,25 @@ Process *hipe_mode_switch(Process *p, unsigned cmd, Eterm reg[]) erts_smp_proc_unlock(p, ERTS_PROC_LOCKS_MSG_RECEIVE); do_schedule: { -#if !(NR_ARG_REGS > 5) - int reds_in = p->def_arg_reg[5]; + struct saved_calls *scb; + + scb = ERTS_PROC_SET_SUSPENDED_SAVED_CALLS_BUF(p, NULL); + if (scb) + ERTS_PROC_SET_SAVED_CALLS_BUF(p, scb); + + /* The process may have died while it was executing, + if so we return out from native code to the interpreter */ + if (erts_smp_atomic32_read_nob(&p->state) & ERTS_PSFLG_EXITING) + p->i = beam_exit; +#ifdef DEBUG + ASSERT(p->debug_reds_in == reds_in); #endif + p->flags &= ~F_HIPE_MODE; + ERTS_SMP_UNREQ_PROC_MAIN_LOCK(p); - p = schedule(p, reds_in - p->fcalls); + p = erts_schedule(NULL, p, reds_in - p->fcalls); ERTS_SMP_REQ_PROC_MAIN_LOCK(p); + ASSERT(!(p->flags & F_HIPE_MODE)); #ifdef ERTS_SMP p->hipe_smp.have_receive_locks = 0; reg = p->scheduler_data->x_reg_array; @@ -501,28 +564,32 @@ Process *hipe_mode_switch(Process *p, unsigned cmd, Eterm reg[]) reg[i] = argp[i]; } { -#if !(NR_ARG_REGS > 5) - Eterm reds_in; -#endif -#if !(NR_ARG_REGS > 4) - Eterm o_reds; -#endif + struct saved_calls *scb; reds_in = p->fcalls; - o_reds = 0; - if (ERTS_PROC_GET_SAVED_CALLS_BUF(p)) { - o_reds = reds_in; - reds_in = 0; - p->fcalls = 0; - } - p->def_arg_reg[4] = o_reds; p->def_arg_reg[5] = reds_in; +#ifdef DEBUG + p->debug_reds_in = reds_in; +#endif if (p->i == hipe_beam_pc_resume) { + p->flags |= F_HIPE_MODE; /* inform bifs where we are comming from... */ + scb = ERTS_PROC_SET_SAVED_CALLS_BUF(p, NULL); + if (scb) + ERTS_PROC_SET_SUSPENDED_SAVED_CALLS_BUF(p, scb); p->i = NULL; p->arity = 0; goto do_resume; } + + scb = ERTS_PROC_GET_SAVED_CALLS_BUF(p); + if (!scb) + p->def_arg_reg[4] = 0; + else { + p->def_arg_reg[4] = CONTEXT_REDS; + p->fcalls = -CONTEXT_REDS + reds_in; + } } + HIPE_CHECK_PCB(p); result = HIPE_MODE_SWITCH_RES_CALL_BEAM; p->def_arg_reg[3] = result; @@ -562,14 +629,29 @@ Process *hipe_mode_switch(Process *p, unsigned cmd, Eterm reg[]) default: erts_exit(ERTS_ERROR_EXIT, "hipe_mode_switch: result %#x\r\n", result); } + + { + struct saved_calls *scb = ERTS_PROC_SET_SUSPENDED_SAVED_CALLS_BUF(p, NULL); + if (!scb) + p->def_arg_reg[4] = 0; + else { + p->def_arg_reg[4] = CONTEXT_REDS; + p->fcalls -= CONTEXT_REDS; + ERTS_PROC_SET_SAVED_CALLS_BUF(p, scb); + } + } + HIPE_CHECK_PCB(p); p->def_arg_reg[3] = result; -#if NR_ARG_REGS > 4 - p->def_arg_reg[4] = o_reds; -#endif #if NR_ARG_REGS > 5 + /* + * When NR_ARG_REGS > 5, we need to protect the process' input + * reduction count (which BEAM stores in def_arg_reg[5]) from + * being clobbered by the arch glue code. + */ p->def_arg_reg[5] = reds_in; #endif + p->flags &= ~F_HIPE_MODE; return p; } |