diff options
Diffstat (limited to 'erts/emulator/sys/ose/sys.c')
| -rw-r--r-- | erts/emulator/sys/ose/sys.c | 1847 |
1 files changed, 0 insertions, 1847 deletions
diff --git a/erts/emulator/sys/ose/sys.c b/erts/emulator/sys/ose/sys.c deleted file mode 100644 index bcd0ffa0b6..0000000000 --- a/erts/emulator/sys/ose/sys.c +++ /dev/null @@ -1,1847 +0,0 @@ -/* - * %CopyrightBegin% - * - * Copyright Ericsson AB 1996-2013. All Rights Reserved. - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * %CopyrightEnd% - */ - -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif -#include "sys/time.h" -#include "time.h" -#include "sys/uio.h" -#include "termios.h" -#include "ctype.h" -#include "termios.h" - -#ifdef HAVE_FCNTL_H -#include "fcntl.h" -#endif - -#ifdef HAVE_SYS_IOCTL_H -#include "sys/ioctl.h" -#endif - -#define ERTS_WANT_BREAK_HANDLING -#define WANT_NONBLOCKING -#include "sys.h" -#include "erl_thr_progress.h" - -#ifdef USE_THREADS -#include "erl_threads.h" -#endif - -#include "erl_mseg.h" - -#include "unistd.h" -#include "efs.h" -#include "erl_printf.h" -#include "aio.h" -#include "pm.h" -#include "fcntl.h" - -/* Set the define to 1 to get some logging */ -#if 0 -#include "ramlog.h" -#define LOG(output) ramlog_printf output -#else -#define LOG(output) -#endif - -extern char **environ; -static erts_smp_rwmtx_t environ_rwmtx; -static PROCESS sig_proxy_pid = 0; - -#define MAX_VSIZE 16 /* Max number of entries allowed in an I/O - * vector sock_sendv(). - */ -/* - * Don't need global.h, but bif_table.h (included by bif.h), - * won't compile otherwise - */ -#include "global.h" -#include "bif.h" - -#include "erl_sys_driver.h" -#include "erl_check_io.h" -#include "erl_cpu_topology.h" - -/* The priority for reader/writer processes */ -#define FD_PROC_PRI get_pri(current_process()) - -typedef struct ErtsSysReportExit_ ErtsSysReportExit; -struct ErtsSysReportExit_ { - ErtsSysReportExit *next; - Eterm port; - int pid; - int ifd; - int ofd; - ErlDrvEvent attach_event; - ErlDrvEvent input_event; - ErlDrvEvent output_event; -}; - -/* This data is shared by these drivers - initialized by spawn_init() */ -static struct driver_data { - ErlDrvPort port_num; - int ofd; - int ifd; - int packet_bytes; - ErtsSysReportExit *report_exit; - int pid; - int alive; - int status; - ErlDrvEvent input_event; - ErlDrvEvent output_event; - struct aiocb aiocb; - FmHandle handle; - char *install_handle; -} *driver_data; /* indexed by fd */ - -struct async { - SIGSELECT signo; - ErlDrvTermData port; - ErlDrvTermData proc; - PROCESS spid; - PROCESS target; - Uint32 ref; -}; - -static ErtsSysReportExit *report_exit_list; -static ERTS_INLINE void report_exit_status(ErtsSysReportExit *rep, int status); - -extern int driver_interrupt(int, int); -extern void do_break(void); - -extern void erl_sys_args(int*, char**); - -/* The following two defs should probably be moved somewhere else */ - -extern void erts_sys_init_float(void); - -extern void erl_crash_dump(char* file, int line, char* fmt, ...); - -#define DIR_SEPARATOR_CHAR '/' - -#if defined(DEBUG) -#define ERL_BUILD_TYPE_MARKER ".debug" -#else /* opt */ -#define ERL_BUILD_TYPE_MARKER -#endif - -#define CHILD_SETUP_PROG_NAME "child_setup" ERL_BUILD_TYPE_MARKER - -#ifdef DEBUG -static int debug_log = 0; -#endif - -#ifdef ERTS_SMP -static erts_smp_atomic32_t have_prepared_crash_dump; -#define ERTS_PREPARED_CRASH_DUMP \ - ((int) erts_smp_atomic32_xchg_nob(&have_prepared_crash_dump, 1)) -#else -static volatile int have_prepared_crash_dump; -#define ERTS_PREPARED_CRASH_DUMP \ - (have_prepared_crash_dump++) -#endif - -static erts_smp_atomic_t sys_misc_mem_sz; - -#if defined(ERTS_SMP) -erts_mtx_t chld_stat_mtx; -#endif - -#if defined(ERTS_SMP) /* ------------------------------------------------- */ -#define CHLD_STAT_LOCK erts_mtx_lock(&chld_stat_mtx) -#define CHLD_STAT_UNLOCK erts_mtx_unlock(&chld_stat_mtx) - -#else /* ------------------------------------------------------------------- */ -#define CHLD_STAT_LOCK -#define CHLD_STAT_UNLOCK -static volatile int children_died; -#endif - -#define SET_AIO(REQ,FD,SIZE,BUFF) \ - memset(&(REQ),0,sizeof(REQ)); \ - (REQ).aio_fildes = FD; \ - (REQ).aio_offset = FM_POSITION_CURRENT; \ - (REQ).aio_nbytes = SIZE; \ - (REQ).aio_buf = BUFF; \ - (REQ).aio_sigevent.sigev_notify = SIGEV_NONE - -/* the first sizeof(struct aiocb *) bytes of the write buffer - * will contain the pointer to the aiocb struct, this needs - * to be freed between asynchronous writes. - * A write of 0 bytes is ignored. */ -#define WRITE_AIO(FD,SIZE,BUFF) do { \ - if (SIZE > 0) { \ - struct aiocb *write_req = driver_alloc(sizeof(struct aiocb)); \ - char *write_buff = driver_alloc((sizeof(char)*SIZE)+1+ \ - (sizeof(struct aiocb *))); \ - *(struct aiocb **)write_buff = (struct aiocb *)write_req; \ - write_buff += sizeof(struct aiocb *); \ - memcpy(write_buff,BUFF,SIZE+1); \ - SET_AIO(*write_req,FD,SIZE,write_buff); \ - if (aio_write(write_req)) \ - ramlog_printf("%s:%d: write failed with %d\n", \ - __FILE__,__LINE__,errno); \ - } \ -} while(0) - -/* free the write_buffer and write_req - * created in the WRITE_AIO() request macro */ -#define FREE_AIO(ptr) do { \ - struct aiocb *aiocb_ptr; \ - char *buffer_ptr; \ - aiocb_ptr = *(struct aiocb **)((ptr)-sizeof(struct aiocb *)); \ - buffer_ptr = (((char*)ptr)-sizeof(struct aiocb *)); \ - driver_free(aiocb_ptr); \ - driver_free(buffer_ptr); \ -} while(0) - -#define DISPATCH_AIO(sig) do { \ - if (aio_dispatch(sig)) \ - ramlog_printf("%s:%d: dispatch failed with %d\n", \ - __FILE__,__LINE__,errno); \ - } while(0) - -#define AIO_PIPE_SIZE 1024 - -/* debug print macros */ -#define DEBUG_RES 0 - -#ifdef DEBUG_RES -#define DEBUG_CHECK_RES(actual, expected) \ - do { \ - if (actual != expected ) { \ - ramlog_printf("Result check failed" \ - " got: 0x%08x expected:0x%08x\nat: %s:%d\n", \ - actual, expected, __FILE__, __LINE__); \ - abort(); /* This might perhaps be too harsh? */ \ - } \ - } while(0) -#else -#define DEBUG_CHECK_RES -#endif - -static struct fd_data { - char pbuf[4]; /* hold partial packet bytes */ - int psz; /* size of pbuf */ - char *buf; - char *cpos; - int sz; - int remain; /* for input on fd */ -} *fd_data; /* indexed by fd */ - -/********************* General functions ****************************/ - -/* This is used by both the drivers and general I/O, must be set early */ -static int max_files = -1; - -/* - * a few variables used by the break handler - */ -#ifdef ERTS_SMP -erts_smp_atomic32_t erts_break_requested; -#define ERTS_SET_BREAK_REQUESTED \ - erts_smp_atomic32_set_nob(&erts_break_requested, (erts_aint32_t) 1) -#define ERTS_UNSET_BREAK_REQUESTED \ - erts_smp_atomic32_set_nob(&erts_break_requested, (erts_aint32_t) 0) -#else -volatile int erts_break_requested = 0; -#define ERTS_SET_BREAK_REQUESTED (erts_break_requested = 1) -#define ERTS_UNSET_BREAK_REQUESTED (erts_break_requested = 0) -#endif -/* set early so the break handler has access to initial mode */ -static struct termios initial_tty_mode; -static int replace_intr = 0; -/* assume yes initially, ttsl_init will clear it */ -int using_oldshell = 1; -static PROCESS get_signal_proxy_pid(void); - -static void -init_check_io(void) -{ - erts_init_check_io(); - max_files = erts_check_io_max_files(); -} - -#ifdef ERTS_POLL_NEED_ASYNC_INTERRUPT_SUPPORT -#define ERTS_CHK_IO_AS_INTR() erts_check_io_async_sig_interrupt() -#else -#define ERTS_CHK_IO_AS_INTR() erts_check_io_interrupt(1) -#endif -#define ERTS_CHK_IO_INTR erts_check_io_interrupt -#define ERTS_CHK_IO_INTR_TMD erts_check_io_interrupt_timed -#define ERTS_CHK_IO erts_check_io -#define ERTS_CHK_IO_SZ erts_check_io_size - - -void -erts_sys_schedule_interrupt(int set) -{ - ERTS_CHK_IO_INTR(set); -} - -#ifdef ERTS_SMP -void -erts_sys_schedule_interrupt_timed(int set, ErtsMonotonicTime timeout_time) -{ - ERTS_CHK_IO_INTR_TMD(set, timeout_time); -} -#endif - -Uint -erts_sys_misc_mem_sz(void) -{ - Uint res = ERTS_CHK_IO_SZ(); - res += erts_smp_atomic_read_mb(&sys_misc_mem_sz); - return res; -} - -/* - * reset the terminal to the original settings on exit - */ -void sys_tty_reset(int exit_code) -{ - if (using_oldshell && !replace_intr) { - SET_BLOCKING(0); - } - else if (isatty(0)) { - tcsetattr(0,TCSANOW,&initial_tty_mode); - } -} - -#ifdef USE_THREADS - -typedef struct { - int sched_bind_data; -} erts_thr_create_data_t; - -/* - * thr_create_prepare() is called in parent thread before thread creation. - * Returned value is passed as argument to thr_create_cleanup(). - */ -static void * -thr_create_prepare(void) -{ - erts_thr_create_data_t *tcdp; - - tcdp = erts_alloc(ERTS_ALC_T_TMP, sizeof(erts_thr_create_data_t)); - - tcdp->sched_bind_data = erts_sched_bind_atthrcreate_prepare(); - - return (void *) tcdp; -} - - -/* thr_create_cleanup() is called in parent thread after thread creation. */ -static void -thr_create_cleanup(void *vtcdp) -{ - erts_thr_create_data_t *tcdp = (erts_thr_create_data_t *) vtcdp; - - erts_sched_bind_atthrcreate_parent(tcdp->sched_bind_data); - - erts_free(ERTS_ALC_T_TMP, tcdp); -} - -static void -thr_create_prepare_child(void *vtcdp) -{ - erts_thr_create_data_t *tcdp = (erts_thr_create_data_t *) vtcdp; - -#ifdef ERTS_ENABLE_LOCK_COUNT - erts_lcnt_thread_setup(); -#endif - - erts_sched_bind_atthrcreate_child(tcdp->sched_bind_data); -} - -#endif /* #ifdef USE_THREADS */ - -/* The two functions below are stolen from win_con.c - They have to use malloc/free/realloc directly becasue - we want to do able to do erts_printf very early on. - */ -#define VPRINTF_BUF_INC_SIZE 128 -static erts_dsprintf_buf_t * -grow_vprintf_buf(erts_dsprintf_buf_t *dsbufp, size_t need) -{ - char *buf; - size_t size; - - ASSERT(dsbufp); - - if (!dsbufp->str) { - size = (((need + VPRINTF_BUF_INC_SIZE - 1) - / VPRINTF_BUF_INC_SIZE) - * VPRINTF_BUF_INC_SIZE); - buf = (char *) malloc(size * sizeof(char)); - } - else { - size_t free_size = dsbufp->size - dsbufp->str_len; - - if (need <= free_size) - return dsbufp; - - size = need - free_size + VPRINTF_BUF_INC_SIZE; - size = (((size + VPRINTF_BUF_INC_SIZE - 1) - / VPRINTF_BUF_INC_SIZE) - * VPRINTF_BUF_INC_SIZE); - size += dsbufp->size; - buf = (char *) realloc((void *) dsbufp->str, - size * sizeof(char)); - } - if (!buf) - return NULL; - if (buf != dsbufp->str) - dsbufp->str = buf; - dsbufp->size = size; - return dsbufp; -} - -static int erts_sys_ramlog_printf(char *format, va_list arg_list) -{ - int res,i; - erts_dsprintf_buf_t dsbuf = ERTS_DSPRINTF_BUF_INITER(grow_vprintf_buf); - res = erts_vdsprintf(&dsbuf, format, arg_list); - if (res >= 0) { - for (i = 0; i < dsbuf.str_len; i+= 50) - /* We print 50 characters at a time because otherwise - the ramlog looks broken */ - ramlog_printf("%.*s",dsbuf.str_len-50 < 0?dsbuf.str_len:50,dsbuf.str+i); - } - if (dsbuf.str) - free((void *) dsbuf.str); - return res; -} - -void -erts_sys_pre_init(void) -{ - erts_printf_add_cr_to_stdout = 1; - erts_printf_add_cr_to_stderr = 1; -#ifdef USE_THREADS - { - erts_thr_init_data_t eid = ERTS_THR_INIT_DATA_DEF_INITER; - - eid.thread_create_child_func = thr_create_prepare_child; - /* Before creation in parent */ - eid.thread_create_prepare_func = thr_create_prepare; - /* After creation in parent */ - eid.thread_create_parent_func = thr_create_cleanup, - - erts_thr_init(&eid); - - report_exit_list = NULL; - -#ifdef ERTS_ENABLE_LOCK_COUNT - erts_lcnt_init(); -#endif - -#if defined(ERTS_SMP) - erts_mtx_init(&chld_stat_mtx, "child_status"); -#endif - } -#ifdef ERTS_SMP - erts_smp_atomic32_init_nob(&erts_break_requested, 0); - erts_smp_atomic32_init_nob(&have_prepared_crash_dump, 0); -#else - erts_break_requested = 0; - have_prepared_crash_dump = 0; -#endif -#if !defined(ERTS_SMP) - children_died = 0; -#endif -#endif /* USE_THREADS */ - - erts_printf_stdout_func = erts_sys_ramlog_printf; - - erts_smp_atomic_init_nob(&sys_misc_mem_sz, 0); -} - -void -erl_sys_init(void) -{ - -#ifdef USE_SETLINEBUF - setlinebuf(stdout); -#else - setvbuf(stdout, (char *)NULL, _IOLBF, BUFSIZ); -#endif - - erts_sys_init_float(); - - /* we save this so the break handler can set and reset it properly */ - /* also so that we can reset on exit (break handler or not) */ - if (isatty(0)) { - tcgetattr(0,&initial_tty_mode); - } - tzset(); /* Required at least for NetBSD with localtime_r() */ -} - -static ERTS_INLINE int -prepare_crash_dump(int secs) -{ -#define NUFBUF (3) - int i, max; - char env[21]; /* enough to hold any 64-bit integer */ - size_t envsz; - /*DeclareTmpHeapNoproc(heap,NUFBUF);*/ - /*Eterm *hp = heap;*/ - /*Eterm list = NIL;*/ - int has_heart = 0; - - UseTmpHeapNoproc(NUFBUF); - - if (ERTS_PREPARED_CRASH_DUMP) - return 0; /* We have already been called */ - - - /* Positive secs means an alarm must be set - * 0 or negative means no alarm - * - * Set alarm before we try to write to a port - * we don't want to hang on a port write with - * no alarm. - * - */ - -#if 0 /*ose TBD!!!*/ - if (secs >= 0) { - alarm((unsigned int)secs); - } -#endif - - /* Make sure we unregister at epmd (unknown fd) and get at least - one free filedescriptor (for erl_crash.dump) */ - - max = max_files; - if (max < 1024) - max = 1024; - for (i = 3; i < max; i++) { - close(i); - } - - envsz = sizeof(env); - i = erts_sys_getenv__("ERL_CRASH_DUMP_NICE", env, &envsz); - if (i >= 0) { - int nice_val; - nice_val = i != 0 ? 0 : atoi(env); - if (nice_val > 39) { - nice_val = 39; - } - set_pri(nice_val); - } - - UnUseTmpHeapNoproc(NUFBUF); -#undef NUFBUF - return has_heart; -} - -int erts_sys_prepare_crash_dump(int secs) -{ - return prepare_crash_dump(secs); -} - -static ERTS_INLINE void -break_requested(void) -{ - /* - * just set a flag - checked for and handled by - * scheduler threads erts_check_io() (not signal handler). - */ -#ifdef DEBUG - fprintf(stderr,"break!\n"); -#endif - if (ERTS_BREAK_REQUESTED) - erl_exit(ERTS_INTR_EXIT, ""); - - ERTS_SET_BREAK_REQUESTED; - ERTS_CHK_IO_AS_INTR(); /* Make sure we don't sleep in poll */ -} - -/* Disable break */ -void erts_set_ignore_break(void) { - -} - -/* Don't use ctrl-c for break handler but let it be - used by the shell instead (see user_drv.erl) */ -void erts_replace_intr(void) { - struct termios mode; - - if (isatty(0)) { - tcgetattr(0, &mode); - - /* here's an example of how to replace ctrl-c with ctrl-u */ - /* mode.c_cc[VKILL] = 0; - mode.c_cc[VINTR] = CKILL; */ - - mode.c_cc[VINTR] = 0; /* disable ctrl-c */ - tcsetattr(0, TCSANOW, &mode); - replace_intr = 1; - } -} - -void init_break_handler(void) -{ - -} - -int sys_max_files(void) -{ - return(max_files); -} - - -/************************** OS info *******************************/ - -/* Used by erlang:info/1. */ -/* (This code was formerly in drv.XXX/XXX_os_drv.c) */ - -char os_type[] = "ose"; - -void -os_flavor(char* namebuf, /* Where to return the name. */ - unsigned size) /* Size of name buffer. */ -{ -#if 0 - struct utsname uts; /* Information about the system. */ - char* s; - - (void) uname(&uts); - for (s = uts.sysname; *s; s++) { - if (isupper((int) *s)) { - *s = tolower((int) *s); - } - } - strcpy(namebuf, uts.sysname); -#else - strncpy(namebuf, "release", size); -#endif -} - -void -os_version(pMajor, pMinor, pBuild) -int* pMajor; /* Pointer to major version. */ -int* pMinor; /* Pointer to minor version. */ -int* pBuild; /* Pointer to build number. */ -{ - *pMajor = 5; - *pMinor = 7; - *pBuild = 0; -} - -void init_getenv_state(GETENV_STATE *state) -{ - erts_smp_rwmtx_rlock(&environ_rwmtx); - *state = NULL; -} - -char **environ; /*ose - needs replacement*/ - -char *getenv_string(GETENV_STATE *state0) -{ - char **state = (char **) *state0; - char *cp; - - ERTS_SMP_LC_ASSERT(erts_smp_lc_rwmtx_is_rlocked(&environ_rwmtx)); - - if (state == NULL) - state = environ; - - cp = *state++; - *state0 = (GETENV_STATE) state; - - return cp; -} - -void fini_getenv_state(GETENV_STATE *state) -{ - *state = NULL; - erts_smp_rwmtx_runlock(&environ_rwmtx); -} - - -/************************** Port I/O *******************************/ - -/* I. Common stuff */ - -union SIGNAL { - SIGSELECT sig_no; - struct FmReadPtr fm_read_reply; - struct FmWritePtr fm_write_reply; - struct async async; -}; - -/* II. The spawn/fd drivers */ - -/* - * Decreasing the size of it below 16384 is not allowed. - */ -#define ERTS_SYS_READ_BUF_SZ (64*1024) - -/* Driver interfaces */ -static ErlDrvData spawn_start(ErlDrvPort, char*, SysDriverOpts*); -static ErlDrvData fd_start(ErlDrvPort, char*, SysDriverOpts*); -static ErlDrvSSizeT fd_control(ErlDrvData, unsigned int, char *, ErlDrvSizeT, - char **, ErlDrvSizeT); -static int spawn_init(void); -static void fd_stop(ErlDrvData); -static void erl_stop(ErlDrvData); -static void ready_input(ErlDrvData, ErlDrvEvent); -static void ready_output(ErlDrvData, ErlDrvEvent); -static void output(ErlDrvData, char*, ErlDrvSizeT); -static void stop_select(ErlDrvEvent, void*); - -static PROCESS -get_signal_proxy_pid(void) { - union SIGNAL *sig; - SIGSELECT any_sig[] = {1,ERTS_SIGNAL_OSE_DRV_ATTACH}; - - if (!sig_proxy_pid) { - sig = alloc(sizeof(union SIGNAL), ERTS_SIGNAL_OSE_DRV_ATTACH); - hunt("ose_signal_driver_proxy", 0, NULL, &sig); - sig = receive(any_sig); - sig_proxy_pid = sender(&sig); - free_buf(&sig); - } - ASSERT(sig_proxy_pid); - return sig_proxy_pid; -} - -static ErlDrvOseEventId -resolve_signal(union SIGNAL* sig) { - switch(sig->sig_no) { - - case FM_READ_PTR_REPLY: - return (ErlDrvOseEventId)sig->fm_read_reply.handle; - - case FM_WRITE_PTR_REPLY: - return (ErlDrvOseEventId)sig->fm_write_reply.handle; - - case ERTS_SIGNAL_OSE_DRV_ATTACH: - return (ErlDrvOseEventId)sig->async.target; - - default: - break; - } - return (ErlDrvOseEventId)-1; -} - -struct erl_drv_entry spawn_driver_entry = { - spawn_init, - spawn_start, - NULL, /* erl_stop, */ - output, - ready_input, - ready_output, - "spawn", - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - ERL_DRV_EXTENDED_MARKER, - ERL_DRV_EXTENDED_MAJOR_VERSION, - ERL_DRV_EXTENDED_MINOR_VERSION, - ERL_DRV_FLAG_USE_PORT_LOCKING, - NULL, NULL, - stop_select -}; -struct erl_drv_entry fd_driver_entry = { - NULL, - fd_start, - fd_stop, - output, - ready_input, - ready_output, - "fd", - NULL, - NULL, - fd_control, - NULL, - NULL, - NULL, /* ready_async */ - NULL, /* flush */ - NULL, /* call */ - NULL, /* event */ - ERL_DRV_EXTENDED_MARKER, - ERL_DRV_EXTENDED_MAJOR_VERSION, - ERL_DRV_EXTENDED_MINOR_VERSION, - 0, /* ERL_DRV_FLAGs */ - NULL, /* handle2 */ - NULL, /* process_exit */ - stop_select -}; - -static void -set_spawn_fd(int local_fd, int remote_fd, PROCESS remote_pid) { - PROCESS vm_pid; - FmHandle handle; - char env_val[55]; - char env_name[10]; - EfsStatus efs_res; - - /* get pid of pipevm and handle of chosen fd */ - efs_res = efs_examine_fd(local_fd, FLIB_FD_VMPID, &vm_pid, 0); - DEBUG_CHECK_RES(efs_res, EFS_SUCCESS); - - /* setup the file descriptor to buffer per line */ - efs_res = efs_config_fd(local_fd, FLIB_FD_BUFMODE, FM_BUFF_LINE, - FLIB_FD_BUFSIZE, 80, 0); - DEBUG_CHECK_RES(efs_res, EFS_SUCCESS); - - /* duplicate handle and set spawn pid owner */ - efs_res = efs_dup_to(local_fd, remote_pid, &handle); - DEBUG_CHECK_RES(efs_res, EFS_SUCCESS); - - sprintf(env_name, "FD%d", remote_fd); - - /* Syntax of the environment variable: - * "FD#" "<pid of pipevm>,<handle>,<buffer mode>,<buff size>,<omode>" */ - sprintf(env_val, "0x%lx,0x%lx,%lu,%lu,0x%x", - vm_pid, handle, - FM_BUFF_LINE, 80, - O_APPEND); - - set_env(remote_pid, env_name, env_val); -} - -static ErlDrvData -set_driver_data(ErlDrvPort port_num, - int ifd, - int ofd, - int packet_bytes, - int read_write, - int exit_status, - PROCESS pid) -{ - Port *prt; - ErtsSysReportExit *report_exit; - - prt = erts_drvport2port(port_num); - if (prt != ERTS_INVALID_ERL_DRV_PORT) { - prt->os_pid = pid; - } - - /* READ */ - if (read_write & DO_READ) { - EfsStatus res = efs_examine_fd(ifd, FLIB_FD_HANDLE, - &driver_data[ifd].handle, 0); - if (res != EFS_SUCCESS) - ramlog_printf("%s:%d: efs_examine_fd(%d) failed with %d\n", - __FILE__,__LINE__,ifd,errno); - driver_data[ifd].ifd = ifd; - driver_data[ifd].packet_bytes = packet_bytes; - driver_data[ifd].port_num = port_num; - driver_data[ifd].pid = pid; - - /* async read struct */ - memset(&driver_data[ifd].aiocb, 0, sizeof(struct aiocb)); - driver_data[ifd].aiocb.aio_buf = driver_alloc(AIO_PIPE_SIZE); - driver_data[ifd].aiocb.aio_fildes = ifd; - driver_data[ifd].aiocb.aio_nbytes = (packet_bytes?packet_bytes:AIO_PIPE_SIZE); - driver_data[ifd].alive = 1; - driver_data[ifd].status = 0; - driver_data[ifd].input_event = - erl_drv_ose_event_alloc(FM_READ_PTR_REPLY, - driver_data[ifd].handle, resolve_signal, - &driver_data[ifd].ifd); - - /* READ & WRITE */ - if (read_write & DO_WRITE) { - driver_data[ifd].ofd = ofd; - efs_examine_fd(ofd, FLIB_FD_HANDLE, &driver_data[ofd].handle, 0); - - driver_data[ifd].output_event = - erl_drv_ose_event_alloc(FM_WRITE_PTR_REPLY, - driver_data[ofd].handle, resolve_signal, - &driver_data[ofd].ofd); - driver_data[ofd].pid = pid; - if (ifd != ofd) { - driver_data[ofd] = driver_data[ifd]; - driver_data[ofd].aiocb.aio_buf = NULL; - } - } - else { /* READ ONLY */ - driver_data[ifd].ofd = -1; - } - - /* enable input event */ - (void) driver_select(port_num, driver_data[ifd].input_event, - (ERL_DRV_READ | ERL_DRV_USE), 1); - - if (aio_read(&driver_data[ifd].aiocb)) - ramlog_printf("%s:%d: aio_read(%d) failed with %d\n", - __FILE__,__LINE__,ifd,errno); - } - else { /* WRITE ONLY */ - efs_examine_fd(ofd, FLIB_FD_HANDLE, &driver_data[ofd].handle, 0); - driver_data[ofd].packet_bytes = packet_bytes; - driver_data[ofd].port_num = port_num; - driver_data[ofd].ofd = ofd; - driver_data[ofd].pid = pid; - driver_data[ofd].alive = 1; - driver_data[ofd].status = 0; - driver_data[ofd].output_event = - erl_drv_ose_event_alloc(FM_WRITE_PTR_REPLY, driver_data[ofd].handle, - resolve_signal, &driver_data[ofd].ofd); - driver_data[ofd].input_event = driver_data[ofd].output_event; - } - - /* this is used for spawned load modules, and is needed - * to properly uninstall them */ - if (exit_status) { - struct PmProgramInfo *info; - int install_handle_size; - union SIGNAL *sig; - PmStatus pm_status; - report_exit = erts_alloc(ERTS_ALC_T_PRT_REP_EXIT, - sizeof(ErtsSysReportExit)); - report_exit->next = report_exit_list; - report_exit->port = erts_drvport2id(port_num); - report_exit->pid = pid; - report_exit->ifd = (read_write & DO_READ) ? ifd : -1; - report_exit->ofd = (read_write & DO_WRITE) ? ofd : -1; - report_exit_list = report_exit; - report_exit->attach_event = - erl_drv_ose_event_alloc(ERTS_SIGNAL_OSE_DRV_ATTACH, pid, - resolve_signal, &driver_data[ifd].ifd); - - /* setup ifd and ofd report exit */ - driver_data[ifd].report_exit = report_exit; - driver_data[ofd].report_exit = report_exit; - - pm_status = ose_pm_program_info(pid, &info); - DEBUG_CHECK_RES(pm_status, PM_SUCCESS); - - install_handle_size = strlen(info->install_handle)+1; - driver_data[ifd].install_handle = driver_alloc(install_handle_size); - strcpy(driver_data[ifd].install_handle, - info->install_handle); - - free_buf((union SIGNAL **)&info); - - sig = alloc(sizeof(struct async), ERTS_SIGNAL_OSE_DRV_ATTACH); - sig->async.target = pid; - send(&sig, get_signal_proxy_pid()); - - /* this event will trigger when we receive an attach signal - * from the recently dead load module */ - (void)driver_select(port_num,report_exit->attach_event, DO_READ, 1); - } - else { - report_exit = NULL; - } - - /* the return value is the pointer to the driver_data struct we created - * in this function, it will be used in the drivers input - * and output functions */ - return (ErlDrvData)((!(read_write & DO_READ) && read_write & DO_WRITE) - ? &driver_data[ofd] - : &driver_data[ifd]); -} - -static int spawn_init() -{ - int i; - - driver_data = (struct driver_data *) - erts_alloc(ERTS_ALC_T_DRV_TAB, max_files * sizeof(struct driver_data)); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, - max_files * sizeof(struct driver_data)); - - for (i = 0; i < max_files; i++) - driver_data[i].pid = -1; - - return 1; -} - -static void -init_fd_data(int fd, ErlDrvPort port_num) -{ - fd_data[fd].buf = NULL; - fd_data[fd].cpos = NULL; - fd_data[fd].remain = 0; - fd_data[fd].sz = 0; - fd_data[fd].psz = 0; -} - -/* FIXME write a decent text on pipes on ose */ -static ErlDrvData -spawn_start(ErlDrvPort port_num, char* name, SysDriverOpts* opts) -{ - int ifd[2]; - int ofd[2]; - static uint32_t ticker = 1; - PmStatus pm_status; - OSDOMAIN domain = PM_NEW_DOMAIN; - PROCESS progpid, mainbid, mainpid; - char *handle = NULL; - struct PmProgramInfo *info; - char *args = NULL; - char *tmp_handle; - ErlDrvData res = (ErlDrvData)-1; - int handle_size; - char *ptr; - - - args = driver_alloc(strlen(name)+1); - strcpy(args, name); - /* We need to handle name in three parts - * - install handle (must be unique) - * - install binary (needed for ose_pm_install_load_module()) - * - full path (as argument to the spawned applications env.var - */ - - /* full path including arguments */ - args = driver_alloc(strlen(name)+1); - strcpy(args, name); - - /* handle path */ - tmp_handle = strrchr(name, '/'); - if (tmp_handle == NULL) { - tmp_handle = name; - } - else { - tmp_handle++; - } - - /* handle args */ - ptr = strchr(tmp_handle, ' '); - if (ptr != NULL) { - *ptr = '\0'; - handle_size = ptr - tmp_handle; - } - else { - handle_size = strlen(name)+1; - } - - /* make room for ticker */ - handle_size += (ticker<10)?3:((ticker<100)?4:5); - handle = driver_alloc(handle_size); - - do { - snprintf(handle, handle_size, "%s_%d", tmp_handle, ticker); - pm_status = ose_pm_install_load_module(0, "ELF", name, handle, - 0, 0, NULL); - ticker++; - } while (pm_status == PM_EINSTALL_HANDLE_ALREADY_INSTALLED); - - if (pm_status != PM_SUCCESS) { - errno = ENOSYS; /* FIXME add comment */ - return ERL_DRV_ERROR_ERRNO; - } - - /* Create Program */ - pm_status = ose_pm_create_program(&domain, handle, 0, 0, - NULL, &progpid, &mainbid); - DEBUG_CHECK_RES(pm_status, PM_SUCCESS); - - /* Get the mainpid from the newly created program */ - pm_status = ose_pm_program_info(progpid, &info); - DEBUG_CHECK_RES(pm_status, PM_SUCCESS); - - mainpid = info->main_process; - free_buf ((union SIGNAL **)&info); - - /* pipevm needs to be started - * pipe will return 0 if success, -1 if not, - * errno will be set */ - if (pipe(ifd) != 0 || pipe(ofd) != 0) { - DEBUG_CHECK_RES(0, -1); - ASSERT(0); - } - - /* setup driver data */ - res = set_driver_data(port_num, ofd[0], ifd[1], opts->packet_bytes, - opts->read_write, 1 /* opts->exit_status */, progpid); - - /* init the fd_data array for read/write */ - init_fd_data(ofd[0], port_num); - init_fd_data(ifd[1], port_num); - - /* setup additional configurations - * for the spawned applications environment */ - if (args != NULL) { - set_env(progpid, "ARGV", args); - } - set_env(mainbid, "EFS_RESOLVE_TMO", 0); - set_spawn_fd(ifd[0], 0, mainpid); - set_spawn_fd(ofd[1], 1, mainpid); - set_spawn_fd(ofd[1], 2, mainpid); - - /* start the spawned program */ - pm_status = ose_pm_start_program(mainbid); - DEBUG_CHECK_RES(pm_status, PM_SUCCESS); - - /* close unused fd's */ - close(ifd[0]); - close(ofd[1]); - - if (handle) { - driver_free(handle); - } - - return (ErlDrvData)res; -} - -#define FD_DEF_HEIGHT 24 -#define FD_DEF_WIDTH 80 -/* Control op */ -#define FD_CTRL_OP_GET_WINSIZE 100 - -static int fd_get_window_size(int fd, Uint32 *width, Uint32 *height) -{ -#ifdef TIOCGWINSZ - struct winsize ws; - if (ioctl(fd,TIOCGWINSZ,&ws) == 0) { - *width = (Uint32) ws.ws_col; - *height = (Uint32) ws.ws_row; - return 0; - } -#endif - return -1; -} - -static ErlDrvSSizeT fd_control(ErlDrvData drv_data, - unsigned int command, - char *buf, ErlDrvSizeT len, - char **rbuf, ErlDrvSizeT rlen) -{ - struct driver_data *data = (struct driver_data *)drv_data; - char resbuff[2*sizeof(Uint32)]; - switch (command) { - case FD_CTRL_OP_GET_WINSIZE: - { - Uint32 w,h; - if (fd_get_window_size(data->ifd,&w,&h)) - return 0; - memcpy(resbuff,&w,sizeof(Uint32)); - memcpy(resbuff+sizeof(Uint32),&h,sizeof(Uint32)); - } - break; - default: - return 0; - } - if (rlen < 2*sizeof(Uint32)) { - *rbuf = driver_alloc(2*sizeof(Uint32)); - } - memcpy(*rbuf,resbuff,2*sizeof(Uint32)); - return 2*sizeof(Uint32); -} - -static ErlDrvData fd_start(ErlDrvPort port_num, char* name, - SysDriverOpts* opts) -{ - ErlDrvData res; - - CHLD_STAT_LOCK; - if (opts->read_write & DO_READ) { - init_fd_data(opts->ifd, port_num); - } - if (opts->read_write & DO_WRITE) { - init_fd_data(opts->ofd, port_num); - } - res = set_driver_data(port_num, opts->ifd, opts->ofd, - opts->packet_bytes, - opts->read_write, 0, -1); - CHLD_STAT_UNLOCK; - return res; -} - -static void clear_fd_data(int fd) -{ - if (fd_data[fd].sz > 0) { - erts_free(ERTS_ALC_T_FD_ENTRY_BUF, (void *) fd_data[fd].buf); - ASSERT(erts_smp_atomic_read_nob(&sys_misc_mem_sz) >= fd_data[fd].sz); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, -1*fd_data[fd].sz); - } - fd_data[fd].buf = NULL; - fd_data[fd].sz = 0; - fd_data[fd].remain = 0; - fd_data[fd].cpos = NULL; - fd_data[fd].psz = 0; -} - -static void nbio_stop_fd(ErlDrvPort prt, ErlDrvEvent ev) -{ - int *fd; - driver_select(prt,ev,DO_READ|DO_WRITE,0); - erl_drv_ose_event_fetch(ev, NULL, NULL, (void **)&fd); - clear_fd_data(*fd); - SET_BLOCKING(*fd); -} - -static void fd_stop(ErlDrvData drv_data) /* Does not close the fds */ -{ - struct driver_data *data = (struct driver_data *)drv_data; - - if (data->ofd != -1) { - if (data->ifd != data->ofd) { /* read and write */ - nbio_stop_fd(data->port_num, data->input_event); - nbio_stop_fd(data->port_num, data->output_event); - } - else { /* write only */ - nbio_stop_fd(data->port_num, data->output_event); - } - } - else { /* read only */ - nbio_stop_fd(data->port_num, data->input_event); - } -} - - -static void erl_stop(ErlDrvData drv_data) -{ - struct driver_data *data = (struct driver_data *)drv_data; - - CHLD_STAT_LOCK; - data->pid = -1; - CHLD_STAT_UNLOCK; - - if (data->ofd != -1) { - if (data->ifd != data->ofd) { /* read and write */ - nbio_stop_fd(data->port_num, data->input_event); - nbio_stop_fd(data->port_num, data->output_event); - } - else { /* write only */ - nbio_stop_fd(data->port_num, data->output_event); - } - } - else { /* read only */ - nbio_stop_fd(data->port_num, data->input_event); - } - close(data->ifd); - close(data->ofd); -} - -/* The parameter e is a pointer to the driver_data structure - * related to the fd to be used as output */ -static void output(ErlDrvData drv_data, char* buf, ErlDrvSizeT len) -{ - ErlDrvSizeT sz; - char lb[4]; - char* lbp; - struct driver_data *data = (struct driver_data *)drv_data; - - if (((data->packet_bytes == 2) && - (len > 0xffff)) || (data->packet_bytes == 1 && len > 0xff)) { - driver_failure_posix(data->port_num, EINVAL); - return; /* -1; */ - } - put_int32(len, lb); - lbp = lb + (4-(data->packet_bytes)); - - if ((sz = driver_sizeq(data->port_num)) > 0) { - if (data->packet_bytes != 0) { - driver_enq(data->port_num, lbp, data->packet_bytes); - } - driver_enq(data->port_num, buf, len); - - if (sz + len + data->packet_bytes >= (1 << 13)) - set_busy_port(data->port_num, 1); - } - else { - char *pbbuf; - if (data->packet_bytes != 0) { - pbbuf = malloc(len + data->packet_bytes); - int i; - for (i = 0; i < data->packet_bytes; i++) { - *pbbuf++ = *lbp++; - } - strncpy(pbbuf, buf, len); - pbbuf -= data->packet_bytes; - } - driver_select(data->port_num, data->output_event, - ERL_DRV_WRITE|ERL_DRV_USE, 1); - WRITE_AIO(data->ofd, - (data->packet_bytes ? len+data->packet_bytes : len), - (data->packet_bytes ? pbbuf : buf)); - if (data->packet_bytes != 0) free(pbbuf); - } - return; /* 0; */ -} - -/* This function is being run when we in recieve - * either a read of 0 bytes, or the attach signal from a dying - * spawned load module */ -static int port_inp_failure(ErlDrvPort port_num, ErlDrvEvent ready_fd, int res) - /* Result: 0 (eof) or -1 (error) */ -{ - int *fd; - SIGSELECT sig_no; - ASSERT(res <= 0); - - erl_drv_ose_event_fetch(ready_fd,&sig_no, NULL, (void **)&fd); - /* As we need to handle two signals, we do this in two steps */ - if (driver_data[*fd].alive) { - report_exit_status(driver_data[*fd].report_exit, 0); /* status? */ - } - else { - driver_select(port_num,ready_fd,DO_READ|DO_WRITE,0); - clear_fd_data(*fd); - driver_report_exit(driver_data[*fd].port_num, driver_data[*fd].status); - /* As we do not really know if the spawn has crashed or exited nicely - * we do not check the result status of the following call.. FIXME - * can we handle this in a better way? */ - ose_pm_uninstall_load_module(driver_data[*fd].install_handle); - driver_free(driver_data[*fd].install_handle); - driver_free((void *)driver_data[*fd].aiocb.aio_buf); - - close(*fd); - } - - return 0; -} - -/* The parameter e is a pointer to the driver_data structure - * related to the fd to be used as output. - * ready_fd is the event that triggered this call to ready_input */ -static void ready_input(ErlDrvData drv_data, ErlDrvEvent ready_fd) -{ - int res; - Uint h; - char *buf; - union SIGNAL *sig; - struct driver_data *data = (struct driver_data *)drv_data; - - sig = erl_drv_ose_get_signal(ready_fd); - ASSERT(sig); - - - while (sig) { - /* If we've recieved an attach signal, we need to handle - * it in port_inp_failure */ - if (sig->sig_no == ERTS_SIGNAL_OSE_DRV_ATTACH) { - port_inp_failure(data->port_num, ready_fd, 0); - } - else { - res = sig->fm_read_reply.actual; - if (res == 0) { - port_inp_failure(data->port_num, ready_fd, res); - break; - } - - if (data->packet_bytes == 0) { - if (res < 0) { - if ((errno != EINTR) && (errno != ERRNO_BLOCK)) { - port_inp_failure(data->port_num, ready_fd, res); - } - } - else if (res == 0) { - /* read of 0 bytes, eof, otherside of pipe is assumed dead */ - port_inp_failure(data->port_num, ready_fd, res); - break; - } - else { - buf = driver_alloc(res); - memcpy(buf, (void *)data->aiocb.aio_buf, res); - driver_select(data->port_num, data->output_event, - ERL_DRV_WRITE|ERL_DRV_USE, 1); - driver_output(data->port_num, (char*) buf, res); - driver_free(buf); - } - /* clear the previous read */ - memset(data->aiocb.aio_buf, 0, res); - - /* issue a new read */ - DISPATCH_AIO(sig); - aio_read(&data->aiocb); - } - else if (data->packet_bytes && fd_data[data->ifd].remain > 0) { - /* we've read a partial package, or a header */ - - if (res == fd_data[data->ifd].remain) { /* we are done! */ - char *buf = data->aiocb.aio_buf; - int i; - - /* do we have anything buffered? */ - if (fd_data[data->ifd].buf != NULL) { - memcpy(fd_data[data->ifd].buf + fd_data[data->ifd].sz, - buf, res); - buf = fd_data[data->ifd].buf; - } - - fd_data[data->ifd].sz += res; - driver_output(data->port_num, buf, (fd_data[data->ifd].sz>0?fd_data[data->ifd].sz:res)); - clear_fd_data(data->ifd); - - /* clear the previous read */ - memset(data->aiocb.aio_buf, 0, res); - - /* issue a new read */ - DISPATCH_AIO(sig); - data->aiocb.aio_nbytes = data->packet_bytes; - - if (data->aiocb.aio_buf == NULL) { - port_inp_failure(data->port_num, ready_fd, -1); - } - aio_read(&data->aiocb); - } - else if(res < fd_data[data->ifd].remain) { /* received part of a package */ - if (fd_data[data->ifd].sz == 0) { - - fd_data[data->ifd].sz += res; - memcpy(fd_data[data->ifd].buf, data->aiocb.aio_buf, res); - fd_data[data->ifd].remain -= res; - } - else { - memcpy(fd_data[data->ifd].buf + fd_data[data->ifd].sz, - data->aiocb.aio_buf, res); - fd_data[data->ifd].sz += res; - fd_data[data->ifd].remain -= res; - } - /* clear the previous read */ - memset(data->aiocb.aio_buf, 0, res); - - /* issue a new read */ - DISPATCH_AIO(sig); - data->aiocb.aio_nbytes = fd_data[data->ifd].remain; - - if (data->aiocb.aio_buf == NULL) { - port_inp_failure(data->port_num, ready_fd, -1); - } - aio_read(&data->aiocb); - } - } - else if (data->packet_bytes && fd_data[data->ifd].remain == 0) { /* we've recieved a header */ - - /* analyze the header FIXME */ - switch (data->packet_bytes) { - case 1: h = get_int8(data->aiocb.aio_buf); break; - case 2: h = get_int16(data->aiocb.aio_buf); break; - case 4: h = get_int32(data->aiocb.aio_buf); break; - } - - fd_data[data->ifd].buf = erts_alloc_fnf(ERTS_ALC_T_FD_ENTRY_BUF, h + data->packet_bytes); - fd_data[data->ifd].remain = ((h + data->packet_bytes) - res); - - /* clear the previous read */ - memset(data->aiocb.aio_buf, 0, data->packet_bytes); - - /* issue a new read */ - DISPATCH_AIO(sig); - data->aiocb.aio_nbytes = h; - - if (data->aiocb.aio_buf == NULL) { - port_inp_failure(data->port_num, ready_fd, -1); - } - aio_read(&data->aiocb); - } - } - sig = erl_drv_ose_get_signal(ready_fd); - } -} - - -/* The parameter e is a pointer to the driver_data structure - * related to the fd to be used as output. - * ready_fd is the event that triggered this call to ready_input */ -static void ready_output(ErlDrvData drv_data, ErlDrvEvent ready_fd) -{ - SysIOVec *iov; - int vlen; - int res; - union SIGNAL *sig; - struct driver_data *data = (struct driver_data *)drv_data; - - sig = erl_drv_ose_get_signal(ready_fd); - ASSERT(sig); - - while (sig != NULL) { - if (sig->fm_write_reply.actual <= 0) { - int status; - - status = efs_status_to_errno(sig->fm_write_reply.status); - driver_select(data->port_num, ready_fd, ERL_DRV_WRITE, 0); - DISPATCH_AIO(sig); - FREE_AIO(sig->fm_write_reply.buffer); - - driver_failure_posix(data->port_num, status); - } - else { /* written bytes > 0 */ - iov = driver_peekq(data->port_num, &vlen); - if (vlen > 0) { - DISPATCH_AIO(sig); - FREE_AIO(sig->fm_write_reply.buffer); - res = driver_deq(data->port_num, iov[0].iov_len); - if (res > 0) { - iov = driver_peekq(data->port_num, &vlen); - WRITE_AIO(data->ofd, iov[0].iov_len, iov[0].iov_base); - } - } - else if (vlen == 0) { - DISPATCH_AIO(sig); - FREE_AIO(sig->fm_write_reply.buffer); - } - - } - sig = erl_drv_ose_get_signal(ready_fd); - } -} - -static void stop_select(ErlDrvEvent ready_fd, void* _) -{ - int *fd; - erl_drv_ose_event_fetch(ready_fd, NULL, NULL, (void **)&fd); - erl_drv_ose_event_free(ready_fd); - close(*fd); -} - - -void erts_do_break_handling(void) -{ - struct termios temp_mode; - int saved = 0; - - /* - * Most functions that do_break() calls are intentionally not thread safe; - * therefore, make sure that all threads but this one are blocked before - * proceeding! - */ - erts_smp_thr_progress_block(); - - /* during break we revert to initial settings */ - /* this is done differently for oldshell */ - if (using_oldshell && !replace_intr) { - SET_BLOCKING(1); - } - else if (isatty(0)) { - tcgetattr(0,&temp_mode); - tcsetattr(0,TCSANOW,&initial_tty_mode); - saved = 1; - } - - /* call the break handling function, reset the flag */ - do_break(); - - fflush(stdout); - - /* after break we go back to saved settings */ - if (using_oldshell && !replace_intr) { - SET_NONBLOCKING(1); - } - else if (saved) { - tcsetattr(0,TCSANOW,&temp_mode); - } - - erts_smp_thr_progress_unblock(); -} - -static pid_t -getpid(void) -{ - return get_bid(current_process()); -} - -int getpagesize(void) -{ - return 1024; -} - - -/* Fills in the systems representation of the jam/beam process identifier. -** The Pid is put in STRING representation in the supplied buffer, -** no interpretatione of this should be done by the rest of the -** emulator. The buffer should be at least 21 bytes long. -*/ -void sys_get_pid(char *buffer, size_t buffer_size){ - pid_t p = getpid(); - /* Assume the pid is scalar and can rest in an unsigned long... */ - erts_snprintf(buffer, buffer_size, "%lu",(unsigned long) p); -} - -int -erts_sys_putenv_raw(char *key, char *value) { - return erts_sys_putenv(key, value); -} -int -erts_sys_putenv(char *key, char *value) -{ - int res; - - erts_smp_rwmtx_rwlock(&environ_rwmtx); - res = set_env(get_bid(current_process()), key, - value); - erts_smp_rwmtx_rwunlock(&environ_rwmtx); - return res; -} - - -int -erts_sys_unsetenv(char *key) -{ - int res; - - erts_smp_rwmtx_rwlock(&environ_rwmtx); - res = set_env(get_bid(current_process()),key,NULL); - erts_smp_rwmtx_rwunlock(&environ_rwmtx); - - return res; -} - -int -erts_sys_getenv__(char *key, char *value, size_t *size) -{ - int res; - char *orig_value = get_env(get_bid(current_process()), key); - if (!orig_value) - res = -1; - else { - size_t len = sys_strlen(orig_value); - if (len >= *size) { - *size = len + 1; - res = 1; - } - else { - *size = len; - sys_memcpy((void *) value, (void *) orig_value, len+1); - res = 0; - } - free_buf((union SIGNAL **)&orig_value); - } - return res; -} - -int -erts_sys_getenv_raw(char *key, char *value, size_t *size) { - return erts_sys_getenv(key, value, size); -} - -/* - * erts_sys_getenv - * returns: - * -1, if environment key is not set with a value - * 0, if environment key is set and value fits into buffer res - * 1, if environment key is set but does not fit into buffer res - * res is set with the needed buffer res value - */ - -int -erts_sys_getenv(char *key, char *value, size_t *size) -{ - int res; - erts_smp_rwmtx_rlock(&environ_rwmtx); - res = erts_sys_getenv__(key, value, size); - erts_smp_rwmtx_runlock(&environ_rwmtx); - return res; -} - -void -sys_init_io(void) -{ - fd_data = (struct fd_data *) - erts_alloc(ERTS_ALC_T_FD_TAB, max_files * sizeof(struct fd_data)); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, - max_files * sizeof(struct fd_data)); -} - -extern const char pre_loaded_code[]; -extern Preload pre_loaded[]; - -void erts_sys_alloc_init(void) -{ -} - -void *erts_sys_alloc(ErtsAlcType_t t, void *x, Uint sz) -{ - void *res = malloc((size_t) sz); -#if HAVE_ERTS_MSEG - if (!res) { - erts_mseg_clear_cache(); - return malloc((size_t) sz); - } -#endif - return res; -} - -void *erts_sys_realloc(ErtsAlcType_t t, void *x, void *p, Uint sz) -{ - void *res = realloc(p, (size_t) sz); -#if HAVE_ERTS_MSEG - if (!res) { - erts_mseg_clear_cache(); - return realloc(p, (size_t) sz); - } -#endif - return res; -} - -void erts_sys_free(ErtsAlcType_t t, void *x, void *p) -{ - free(p); -} - -/* Return a pointer to a vector of names of preloaded modules */ - -Preload* -sys_preloaded(void) -{ - return pre_loaded; -} - -/* Return a pointer to preloaded code for module "module" */ -unsigned char* -sys_preload_begin(Preload* p) -{ - return p->code; -} - -/* Clean up if allocated */ -void sys_preload_end(Preload* p) -{ - /* Nothing */ -} - -/* Read a key from console (?) */ - -int sys_get_key(fd) -int fd; -{ - int c; - unsigned char rbuf[64]; - - fflush(stdout); /* Flush query ??? */ - - if ((c = read(fd,rbuf,64)) <= 0) { - return c; - } - - return rbuf[0]; -} - - -#ifdef DEBUG - -extern int erts_initialized; -void -erl_assert_error(const char* expr, const char* func, - const char* file, int line) -{ - fflush(stdout); - fprintf(stderr, "%s:%d:%s() Assertion failed: %s\n", - file, line, func, expr); - fflush(stderr); - ramlog_printf("%s:%d:%s() Assertion failed: %s\n", - file, line, func, expr); - - abort(); -} - -void -erl_debug(char* fmt, ...) -{ - char sbuf[1024]; /* Temporary buffer. */ - va_list va; - - if (debug_log) { - va_start(va, fmt); - vsprintf(sbuf, fmt, va); - va_end(va); - fprintf(stderr, "%s", sbuf); - } -} - -#endif /* DEBUG */ - -static ERTS_INLINE void -report_exit_status(ErtsSysReportExit *rep, int status) -{ - if (rep->ifd >= 0) { - driver_data[rep->ifd].alive = 0; - driver_data[rep->ifd].status = status; - } - if (rep->ofd >= 0) { - driver_data[rep->ofd].alive = 0; - driver_data[rep->ofd].status = status; - } - - erts_free(ERTS_ALC_T_PRT_REP_EXIT, rep); -} - -#define ERTS_REPORT_EXIT_STATUS report_exit_status - -/* - * Called from schedule() when it runs out of runnable processes, - * or when Erlang code has performed INPUT_REDUCTIONS reduction - * steps. runnable == 0 iff there are no runnable Erlang processes. - */ -void -erl_sys_schedule(int runnable) -{ - ASSERT(get_fsem(current_process()) == 0); -#ifdef ERTS_SMP - ASSERT(erts_get_scheduler_data()->no == 1); - ERTS_CHK_IO(!runnable); -#else - ERTS_CHK_IO( 1 ); -#endif - ASSERT(get_fsem(current_process()) == 0); - ERTS_SMP_LC_ASSERT(!erts_thr_progress_is_blocking()); -} - - -#ifdef ERTS_SMP - -void -erts_sys_main_thread(void) -{ - erts_thread_disable_fpe(); - - /* Become signal receiver thread... */ -#ifdef ERTS_ENABLE_LOCK_CHECK - erts_lc_set_thread_name("signal_receiver"); -#endif - - while (1) { - static const SIGSELECT sigsel[] = {0}; - union SIGNAL *msg = receive(sigsel); - - fprintf(stderr,"Main thread got message %d from 0x%x!!\r\n", - msg->sig_no, sender(&msg)); - free_buf(&msg); - } -} - -#endif /* ERTS_SMP */ - -void -erl_sys_args(int* argc, char** argv) -{ - int i, j; - - erts_smp_rwmtx_init(&environ_rwmtx, "environ"); - - init_check_io(); - - /* Handled arguments have been marked with NULL. Slide arguments - not handled towards the beginning of argv. */ - for (i = 0, j = 0; i < *argc; i++) { - if (argv[i]) - argv[j++] = argv[i]; - } - *argc = j; - -} |