diff options
Diffstat (limited to 'erts/emulator/sys/unix/sys.c')
| -rw-r--r-- | erts/emulator/sys/unix/sys.c | 2124 |
1 files changed, 265 insertions, 1859 deletions
diff --git a/erts/emulator/sys/unix/sys.c b/erts/emulator/sys/unix/sys.c index a7ea4b2490..6fb86f6dda 100644 --- a/erts/emulator/sys/unix/sys.c +++ b/erts/emulator/sys/unix/sys.c @@ -1,18 +1,19 @@ /* * %CopyrightBegin% * - * Copyright Ericsson AB 1996-2013. All Rights Reserved. + * Copyright Ericsson AB 1996-2016. All Rights Reserved. * - * The contents of this file are subject to the Erlang Public License, - * Version 1.1, (the "License"); you may not use this file except in - * compliance with the License. You should have received a copy of the - * Erlang Public License along with this software. If not, it can be - * retrieved online at http://www.erlang.org/. + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at * - * Software distributed under the License is distributed on an "AS IS" - * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - * the License for the specific language governing rights and limitations - * under the License. + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. * * %CopyrightEnd% */ @@ -34,6 +35,7 @@ #include <termios.h> #include <ctype.h> #include <sys/utsname.h> +#include <sys/select.h> #ifdef ISC32 #include <sys/bsdtypes.h> @@ -47,7 +49,6 @@ #include <sys/ioctl.h> #endif -#define NEED_CHILD_SETUP_DEFINES #define ERTS_WANT_BREAK_HANDLING #define ERTS_WANT_GOT_SIGUSR1 #define WANT_NONBLOCKING /* must define this to pull in defs from sys.h */ @@ -65,7 +66,7 @@ #include "erl_mseg.h" extern char **environ; -static erts_smp_rwmtx_t environ_rwmtx; +erts_smp_rwmtx_t environ_rwmtx; #define MAX_VSIZE 16 /* Max number of entries allowed in an I/O * vector sock_sendv(). @@ -74,68 +75,12 @@ static erts_smp_rwmtx_t environ_rwmtx; * Don't need global.h, but bif_table.h (included by bif.h), * won't compile otherwise */ -#include "global.h" +#include "global.h" #include "bif.h" -#include "erl_sys_driver.h" #include "erl_check_io.h" #include "erl_cpu_topology.h" -#ifndef DISABLE_VFORK -#define DISABLE_VFORK 0 -#endif - -#ifdef USE_THREADS -# ifdef ENABLE_CHILD_WAITER_THREAD -# define CHLDWTHR ENABLE_CHILD_WAITER_THREAD -# else -# define CHLDWTHR 0 -# endif -#else -# define CHLDWTHR 0 -#endif -/* - * [OTP-3906] - * Solaris signal management gets confused when threads are used and a - * lot of child processes dies. The confusion results in that SIGCHLD - * signals aren't delivered to the emulator which in turn results in - * a lot of defunct processes in the system. - * - * The problem seems to appear when a signal is frequently - * blocked/unblocked at the same time as the signal is frequently - * propagated. The child waiter thread is a workaround for this problem. - * The SIGCHLD signal is always blocked (in all threads), and the child - * waiter thread fetches the signal by a call to sigwait(). See - * child_waiter(). - */ - -typedef struct ErtsSysReportExit_ ErtsSysReportExit; -struct ErtsSysReportExit_ { - ErtsSysReportExit *next; - Eterm port; - int pid; - int ifd; - int ofd; -#if CHLDWTHR && !defined(ERTS_SMP) - int status; -#endif -}; - -/* This data is shared by these drivers - initialized by spawn_init() */ -static struct driver_data { - ErlDrvPort port_num; - int ofd, packet_bytes; - ErtsSysReportExit *report_exit; - int pid; - int alive; - int status; -} *driver_data; /* indexed by fd */ - -static ErtsSysReportExit *report_exit_list; -#if CHLDWTHR && !defined(ERTS_SMP) -static ErtsSysReportExit *report_exit_transit_list; -#endif - extern int driver_interrupt(int, int); extern void do_break(void); @@ -147,26 +92,6 @@ extern void erts_sys_init_float(void); extern void erl_crash_dump(char* file, int line, char* fmt, ...); -#define DIR_SEPARATOR_CHAR '/' - -#if defined(DEBUG) -#define ERL_BUILD_TYPE_MARKER ".debug" -#elif defined(PURIFY) -#define ERL_BUILD_TYPE_MARKER ".purify" -#elif defined(QUANTIFY) -#define ERL_BUILD_TYPE_MARKER ".quantify" -#elif defined(PURECOV) -#define ERL_BUILD_TYPE_MARKER ".purecov" -#elif defined(VALGRIND) -#define ERL_BUILD_TYPE_MARKER ".valgrind" -#else /* opt */ -#define ERL_BUILD_TYPE_MARKER -#endif - -#define CHILD_SETUP_PROG_NAME "child_setup" ERL_BUILD_TYPE_MARKER -#if !DISABLE_VFORK -static char *child_setup_prog; -#endif #ifdef DEBUG static int debug_log = 0; @@ -190,54 +115,22 @@ static volatile int have_prepared_crash_dump; (have_prepared_crash_dump++) #endif -static erts_smp_atomic_t sys_misc_mem_sz; +erts_smp_atomic_t sys_misc_mem_sz; #if defined(ERTS_SMP) static void smp_sig_notify(char c); static int sig_notify_fds[2] = {-1, -1}; -#elif defined(USE_THREADS) -static int async_fd[2]; -#endif -#if CHLDWTHR || defined(ERTS_SMP) -erts_mtx_t chld_stat_mtx; -#endif -#if CHLDWTHR -static erts_tid_t child_waiter_tid; -/* chld_stat_mtx is used to protect against concurrent accesses - of the driver_data fields pid, alive, and status. */ -erts_cnd_t chld_stat_cnd; -static long children_alive; -#define CHLD_STAT_LOCK erts_mtx_lock(&chld_stat_mtx) -#define CHLD_STAT_UNLOCK erts_mtx_unlock(&chld_stat_mtx) -#define CHLD_STAT_WAIT erts_cnd_wait(&chld_stat_cnd, &chld_stat_mtx) -#define CHLD_STAT_SIGNAL erts_cnd_signal(&chld_stat_cnd) -#elif defined(ERTS_SMP) /* ------------------------------------------------- */ -#define CHLD_STAT_LOCK erts_mtx_lock(&chld_stat_mtx) -#define CHLD_STAT_UNLOCK erts_mtx_unlock(&chld_stat_mtx) - -#else /* ------------------------------------------------------------------- */ -#define CHLD_STAT_LOCK -#define CHLD_STAT_UNLOCK -static volatile int children_died; +#if !defined(ETHR_UNUSABLE_SIGUSRX) && defined(ERTS_THR_HAVE_SIG_FUNCS) +static int sig_suspend_fds[2] = {-1, -1}; +#define ERTS_SYS_SUSPEND_SIGNAL SIGUSR2 #endif +#endif -static struct fd_data { - char pbuf[4]; /* hold partial packet bytes */ - int psz; /* size of pbuf */ - char *buf; - char *cpos; - int sz; - int remain; /* for input on fd */ -} *fd_data; /* indexed by fd */ - -/* static FUNCTION(int, write_fill, (int, char*, int)); unused? */ -static void note_child_death(int, int); +jmp_buf erts_sys_sigsegv_jmp; -#if CHLDWTHR -static void* child_waiter(void *); -#endif +static int crashdump_companion_cube_fd = -1; /********************* General functions ****************************/ @@ -273,11 +166,11 @@ struct { int (*event)(ErlDrvPort, ErlDrvEvent, ErlDrvEventData); void (*check_io_as_interrupt)(void); void (*check_io_interrupt)(int); - void (*check_io_interrupt_tmd)(int, erts_short_time_t); + void (*check_io_interrupt_tmd)(int, ErtsMonotonicTime); void (*check_io)(int); Uint (*size)(void); Eterm (*info)(void *); - int (*check_io_debug)(void); + int (*check_io_debug)(ErtsCheckIoDebugInfo *); } io_func = {0}; @@ -299,9 +192,9 @@ Eterm erts_check_io_info(void *p) } int -erts_check_io_debug(void) +erts_check_io_debug(ErtsCheckIoDebugInfo *ip) { - return (*io_func.check_io_debug)(); + return (*io_func.check_io_debug)(ip); } @@ -379,9 +272,9 @@ erts_sys_schedule_interrupt(int set) #ifdef ERTS_SMP void -erts_sys_schedule_interrupt_timed(int set, erts_short_time_t msec) +erts_sys_schedule_interrupt_timed(int set, ErtsMonotonicTime timeout_time) { - ERTS_CHK_IO_INTR_TMD(set, msec); + ERTS_CHK_IO_INTR_TMD(set, timeout_time); } #endif @@ -409,15 +302,18 @@ void sys_tty_reset(int exit_code) #ifdef __tile__ /* Direct malloc to spread memory around the caches of multiple tiles. */ #include <malloc.h> +#if defined(MALLOC_USE_HASH) MALLOC_USE_HASH(1); #endif +#endif #ifdef USE_THREADS #ifdef ERTS_THR_HAVE_SIG_FUNCS + /* * Child thread inherits parents signal mask at creation. In order to - * guarantee that the main thread will receive all SIGINT, SIGCHLD, and + * guarantee that the main thread will receive all SIGINT, and * SIGUSR1 signals sent to the process, we block these signals in the * parent thread when creating a new thread. */ @@ -495,11 +391,14 @@ thr_create_prepare_child(void *vtcdp) void erts_sys_pre_init(void) { +#ifdef USE_THREADS + erts_thr_init_data_t eid = ERTS_THR_INIT_DATA_DEF_INITER; +#endif + erts_printf_add_cr_to_stdout = 1; erts_printf_add_cr_to_stderr = 1; + #ifdef USE_THREADS - { - erts_thr_init_data_t eid = ERTS_THR_INIT_DATA_DEF_INITER; eid.thread_create_child_func = thr_create_prepare_child; /* Before creation in parent */ @@ -510,29 +409,21 @@ erts_sys_pre_init(void) #ifdef ERTS_THR_HAVE_SIG_FUNCS sigemptyset(&thr_create_sigmask); sigaddset(&thr_create_sigmask, SIGINT); /* block interrupt */ - sigaddset(&thr_create_sigmask, SIGCHLD); /* block child signals */ sigaddset(&thr_create_sigmask, SIGUSR1); /* block user defined signal */ #endif erts_thr_init(&eid); - report_exit_list = NULL; - #ifdef ERTS_ENABLE_LOCK_COUNT erts_lcnt_init(); #endif -#if CHLDWTHR || defined(ERTS_SMP) - erts_mtx_init(&chld_stat_mtx, "child_status"); -#endif -#if CHLDWTHR -#ifndef ERTS_SMP - report_exit_transit_list = NULL; -#endif - erts_cnd_init(&chld_stat_cnd); - children_alive = 0; -#endif - } +#endif /* USE_THREADS */ + + erts_init_sys_time_sup(); + +#ifdef USE_THREADS + #ifdef ERTS_SMP erts_smp_atomic32_init_nob(&erts_break_requested, 0); erts_smp_atomic32_init_nob(&erts_got_sigusr1, 0); @@ -542,49 +433,42 @@ erts_sys_pre_init(void) erts_got_sigusr1 = 0; have_prepared_crash_dump = 0; #endif -#if !CHLDWTHR && !defined(ERTS_SMP) - children_died = 0; -#endif + #endif /* USE_THREADS */ + erts_smp_atomic_init_nob(&sys_misc_mem_sz, 0); + + { + /* + * Unfortunately we depend on fd 0,1,2 in the old shell code. + * So if for some reason we do not have those open when we start + * we have to open them here. Not doing this can cause the emulator + * to deadlock when reaping the fd_driver ports :( + */ + int fd; + /* Make sure fd 0 is open */ + if ((fd = open("/dev/null", O_RDONLY)) != 0) + close(fd); + /* Make sure fds 1 and 2 are open */ + while (fd < 3) { + fd = open("/dev/null", O_WRONLY); + } + close(fd); + } + + /* We need a file descriptor to close in the crashdump creation. + * We close this one to be sure we can get a fd for our real file ... + * so, we create one here ... a stone to carry all the way home. + */ + + crashdump_companion_cube_fd = open("/dev/null", O_RDONLY); + + /* don't lose it, there will be cake */ } void erl_sys_init(void) { -#if !DISABLE_VFORK - { - int res; - char bindir[MAXPATHLEN]; - size_t bindirsz = sizeof(bindir); - Uint csp_path_sz; - - res = erts_sys_getenv_raw("BINDIR", bindir, &bindirsz); - if (res != 0) { - if (res < 0) - erl_exit(-1, - "Environment variable BINDIR is not set\n"); - if (res > 0) - erl_exit(-1, - "Value of environment variable BINDIR is too large\n"); - } - if (bindir[0] != DIR_SEPARATOR_CHAR) - erl_exit(-1, - "Environment variable BINDIR does not contain an" - " absolute path\n"); - csp_path_sz = (strlen(bindir) - + 1 /* DIR_SEPARATOR_CHAR */ - + sizeof(CHILD_SETUP_PROG_NAME) - + 1); - child_setup_prog = erts_alloc(ERTS_ALC_T_CS_PROG_PATH, csp_path_sz); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, csp_path_sz); - erts_snprintf(child_setup_prog, csp_path_sz, - "%s%c%s", - bindir, - DIR_SEPARATOR_CHAR, - CHILD_SETUP_PROG_NAME); - } -#endif #ifdef USE_SETLINEBUF setlinebuf(stdout); @@ -604,39 +488,7 @@ erl_sys_init(void) /* signal handling */ -#ifdef SIG_SIGSET /* Old SysV */ -RETSIGTYPE (*sys_sigset(sig, func))() -int sig; -RETSIGTYPE (*func)(); -{ - return(sigset(sig, func)); -} -void sys_sigblock(int sig) -{ - sighold(sig); -} -void sys_sigrelease(int sig) -{ - sigrelse(sig); -} -#else /* !SIG_SIGSET */ -#ifdef SIG_SIGNAL /* Old BSD */ -RETSIGTYPE (*sys_sigset(sig, func))(int, int) -int sig; -RETSIGTYPE (*func)(); -{ - return(signal(sig, func)); -} -sys_sigblock(int sig) -{ - sigblock(sig); -} -sys_sigrelease(int sig) -{ - sigsetmask(sigblock(0) & ~sigmask(sig)); -} -#else /* !SIG_SIGNAL */ /* The True Way - POSIX!:-) */ -RETSIGTYPE (*sys_sigset(int sig, RETSIGTYPE (*func)(int)))(int) +SIGFUNC sys_signal(int sig, SIGFUNC func) { struct sigaction act, oact; @@ -669,36 +521,47 @@ void sys_sigrelease(int sig) sigaddset(&mask, sig); sigprocmask(SIG_UNBLOCK, &mask, (sigset_t *)NULL); } -#endif /* !SIG_SIGNAL */ -#endif /* !SIG_SIGSET */ -#if (0) /* not used? -- gordon */ -static void (*break_func)(); -static RETSIGTYPE break_handler(int sig) -{ -#ifdef QNX - /* Turn off SIGCHLD during break processing */ - sys_sigblock(SIGCHLD); -#endif - (*break_func)(); -#ifdef QNX - sys_sigrelease(SIGCHLD); -#endif +void erts_sys_sigsegv_handler(int signo) { + if (signo == SIGSEGV) { + longjmp(erts_sys_sigsegv_jmp, 1); + } +} + +/* + * Function returns 1 if we can read from all values in between + * start and stop. + */ +int +erts_sys_is_area_readable(char *start, char *stop) { + int fds[2]; + if (!pipe(fds)) { + /* We let write try to figure out if the pointers are readable */ + int res = write(fds[1], start, (char*)stop - (char*)start); + if (res == -1) { + close(fds[0]); + close(fds[1]); + return 0; + } + close(fds[0]); + close(fds[1]); + return 1; + } + return 0; + } -#endif /* 0 */ static ERTS_INLINE int prepare_crash_dump(int secs) { #define NUFBUF (3) - int i, max; + int i; char env[21]; /* enough to hold any 64-bit integer */ size_t envsz; DeclareTmpHeapNoproc(heap,NUFBUF); Port *heart_port; Eterm *hp = heap; Eterm list = NIL; - int heart_fd[2] = {-1,-1}; int has_heart = 0; UseTmpHeapNoproc(NUFBUF); @@ -721,43 +584,22 @@ prepare_crash_dump(int secs) alarm((unsigned int)secs); } - if (heart_port) { - /* hearts input fd - * We "know" drv_data is the in_fd since the port is started with read|write - */ - heart_fd[0] = (int)heart_port->drv_data; - heart_fd[1] = (int)driver_data[heart_fd[0]].ofd; - has_heart = 1; + /* close all viable sockets via emergency close callbacks. + * Specifically we want to close epmd sockets. + */ - list = CONS(hp, make_small(8), list); hp += 2; + erts_emergency_close_ports(); + if (heart_port) { + has_heart = 1; + list = CONS(hp, make_small(8), list); hp += 2; /* send to heart port, CMD = 8, i.e. prepare crash dump =o */ erts_port_output(NULL, ERTS_PORT_SIG_FLG_FORCE_IMM_CALL, heart_port, heart_port->common.id, list, NULL); } - /* Make sure we unregister at epmd (unknown fd) and get at least - one free filedescriptor (for erl_crash.dump) */ - - max = max_files; - if (max < 1024) - max = 1024; - for (i = 3; i < max; i++) { -#if defined(ERTS_SMP) - /* We don't want to close the signal notification pipe... */ - if (i == sig_notify_fds[0] || i == sig_notify_fds[1]) - continue; -#elif defined(USE_THREADS) - /* We don't want to close the async notification pipe... */ - if (i == async_fd[0] || i == async_fd[1]) - continue; -#endif - /* We don't want to close our heart yet ... */ - if (i == heart_fd[0] || i == heart_fd[1]) - continue; - - close(i); - } + /* Make sure we have a fd for our crashdump file. */ + close(crashdump_companion_cube_fd); envsz = sizeof(env); i = erts_sys_getenv__("ERL_CRASH_DUMP_NICE", env, &envsz); @@ -791,7 +633,7 @@ break_requested(void) fprintf(stderr,"break!\n"); #endif if (ERTS_BREAK_REQUESTED) - erl_exit(ERTS_INTR_EXIT, ""); + erts_exit(ERTS_INTR_EXIT, ""); ERTS_SET_BREAK_REQUESTED; ERTS_CHK_IO_AS_INTR(); /* Make sure we don't sleep in poll */ @@ -830,14 +672,28 @@ sigusr1_exit(void) } prepare_crash_dump(secs); - erl_exit(1, "Received SIGUSR1\n"); + erts_exit(ERTS_ERROR_EXIT, "Received SIGUSR1\n"); } #ifdef ETHR_UNUSABLE_SIGUSRX #warning "Unusable SIGUSR1 & SIGUSR2. Disabling use of these signals" -#endif -#ifndef ETHR_UNUSABLE_SIGUSRX +#else + +#ifdef ERTS_SYS_SUSPEND_SIGNAL +void +sys_thr_suspend(erts_tid_t tid) { + erts_thr_kill(tid, ERTS_SYS_SUSPEND_SIGNAL); +} + +void +sys_thr_resume(erts_tid_t tid) { + int i = 0, res; + do { + res = write(sig_suspend_fds[1],&i,sizeof(i)); + } while (res < 0 && errno == EAGAIN); +} +#endif #if (defined(SIG_SIGSET) || defined(SIG_SIGNAL)) static RETSIGTYPE user_signal1(void) @@ -852,27 +708,27 @@ static RETSIGTYPE user_signal1(int signum) #endif } -#ifdef QUANTIFY +#ifdef ERTS_SYS_SUSPEND_SIGNAL #if (defined(SIG_SIGSET) || defined(SIG_SIGNAL)) -static RETSIGTYPE user_signal2(void) +static RETSIGTYPE suspend_signal(void) #else -static RETSIGTYPE user_signal2(int signum) +static RETSIGTYPE suspend_signal(int signum) #endif { -#ifdef ERTS_SMP - smp_sig_notify('2'); -#else - quantify_save_data(); -#endif + int res; + int buf[1]; + do { + res = read(sig_suspend_fds[0], buf, sizeof(int)); + } while (res < 0 && errno == EINTR); } -#endif +#endif /* #ifdef ERTS_SYS_SUSPEND_SIGNAL */ #endif /* #ifndef ETHR_UNUSABLE_SIGUSRX */ static void quit_requested(void) { - erl_exit(ERTS_INTR_EXIT, ""); + erts_exit(ERTS_INTR_EXIT, ""); } #if (defined(SIG_SIGSET) || defined(SIG_SIGNAL)) @@ -890,9 +746,9 @@ static RETSIGTYPE do_quit(int signum) /* Disable break */ void erts_set_ignore_break(void) { - sys_sigset(SIGINT, SIG_IGN); - sys_sigset(SIGQUIT, SIG_IGN); - sys_sigset(SIGTSTP, SIG_IGN); + sys_signal(SIGINT, SIG_IGN); + sys_signal(SIGQUIT, SIG_IGN); + sys_signal(SIGTSTP, SIG_IGN); } /* Don't use ctrl-c for break handler but let it be @@ -915,65 +771,24 @@ void erts_replace_intr(void) { void init_break_handler(void) { - sys_sigset(SIGINT, request_break); + sys_signal(SIGINT, request_break); #ifndef ETHR_UNUSABLE_SIGUSRX - sys_sigset(SIGUSR1, user_signal1); -#ifdef QUANTIFY - sys_sigset(SIGUSR2, user_signal2); -#endif + sys_signal(SIGUSR1, user_signal1); #endif /* #ifndef ETHR_UNUSABLE_SIGUSRX */ - sys_sigset(SIGQUIT, do_quit); -} - -int sys_max_files(void) -{ - return(max_files); + sys_signal(SIGQUIT, do_quit); } -static void block_signals(void) +void sys_init_suspend_handler(void) { -#if !CHLDWTHR - sys_sigblock(SIGCHLD); -#endif -#ifndef ERTS_SMP - sys_sigblock(SIGINT); -#ifndef ETHR_UNUSABLE_SIGUSRX - sys_sigblock(SIGUSR1); -#endif +#ifdef ERTS_SYS_SUSPEND_SIGNAL + sys_signal(ERTS_SYS_SUSPEND_SIGNAL, suspend_signal); #endif } -static void unblock_signals(void) -{ - /* Update erl_child_setup.c if changed */ -#if !CHLDWTHR - sys_sigrelease(SIGCHLD); -#endif -#ifndef ERTS_SMP - sys_sigrelease(SIGINT); -#ifndef ETHR_UNUSABLE_SIGUSRX - sys_sigrelease(SIGUSR1); -#endif /* #ifndef ETHR_UNUSABLE_SIGUSRX */ -#endif -} -/************************** Time stuff **************************/ -#ifdef HAVE_GETHRTIME -#ifdef GETHRTIME_WITH_CLOCK_GETTIME - -SysHrTime sys_gethrtime(void) +int sys_max_files(void) { - struct timespec ts; - long long result; - if (clock_gettime(CLOCK_MONOTONIC,&ts) != 0) { - erl_exit(1,"Fatal, could not get clock_monotonic value!, " - "errno = %d\n", errno); - } - result = ((long long) ts.tv_sec) * 1000000000LL + - ((long long) ts.tv_nsec); - return (SysHrTime) result; + return(max_files); } -#endif -#endif /************************** OS info *******************************/ @@ -1062,1306 +877,6 @@ void fini_getenv_state(GETENV_STATE *state) erts_smp_rwmtx_runlock(&environ_rwmtx); } - -/************************** Port I/O *******************************/ - - - -/* I. Common stuff */ - -/* - * Decreasing the size of it below 16384 is not allowed. - */ - -/* II. The spawn/fd/vanilla drivers */ - -#define ERTS_SYS_READ_BUF_SZ (64*1024) - -/* Driver interfaces */ -static ErlDrvData spawn_start(ErlDrvPort, char*, SysDriverOpts*); -static ErlDrvData fd_start(ErlDrvPort, char*, SysDriverOpts*); -static ErlDrvSSizeT fd_control(ErlDrvData, unsigned int, char *, ErlDrvSizeT, - char **, ErlDrvSizeT); -static ErlDrvData vanilla_start(ErlDrvPort, char*, SysDriverOpts*); -static int spawn_init(void); -static void fd_stop(ErlDrvData); -static void stop(ErlDrvData); -static void ready_input(ErlDrvData, ErlDrvEvent); -static void ready_output(ErlDrvData, ErlDrvEvent); -static void output(ErlDrvData, char*, ErlDrvSizeT); -static void outputv(ErlDrvData, ErlIOVec*); -static void stop_select(ErlDrvEvent, void*); - -struct erl_drv_entry spawn_driver_entry = { - spawn_init, - spawn_start, - stop, - output, - ready_input, - ready_output, - "spawn", - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - ERL_DRV_EXTENDED_MARKER, - ERL_DRV_EXTENDED_MAJOR_VERSION, - ERL_DRV_EXTENDED_MINOR_VERSION, - ERL_DRV_FLAG_USE_PORT_LOCKING, - NULL, NULL, - stop_select -}; -struct erl_drv_entry fd_driver_entry = { - NULL, - fd_start, - fd_stop, - output, - ready_input, - ready_output, - "fd", - NULL, - NULL, - fd_control, - NULL, - outputv, - NULL, /* ready_async */ - NULL, /* flush */ - NULL, /* call */ - NULL, /* event */ - ERL_DRV_EXTENDED_MARKER, - ERL_DRV_EXTENDED_MAJOR_VERSION, - ERL_DRV_EXTENDED_MINOR_VERSION, - 0, /* ERL_DRV_FLAGs */ - NULL, /* handle2 */ - NULL, /* process_exit */ - stop_select -}; -struct erl_drv_entry vanilla_driver_entry = { - NULL, - vanilla_start, - stop, - output, - ready_input, - ready_output, - "vanilla", - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, - NULL, /* flush */ - NULL, /* call */ - NULL, /* event */ - ERL_DRV_EXTENDED_MARKER, - ERL_DRV_EXTENDED_MAJOR_VERSION, - ERL_DRV_EXTENDED_MINOR_VERSION, - 0, /* ERL_DRV_FLAGs */ - NULL, /* handle2 */ - NULL, /* process_exit */ - stop_select -}; - -/* Handle SIGCHLD signals. */ -#if (defined(SIG_SIGSET) || defined(SIG_SIGNAL)) -static RETSIGTYPE onchld(void) -#else -static RETSIGTYPE onchld(int signum) -#endif -{ -#if CHLDWTHR - ASSERT(0); /* We should *never* catch a SIGCHLD signal */ -#elif defined(ERTS_SMP) - smp_sig_notify('C'); -#else - children_died = 1; - ERTS_CHK_IO_AS_INTR(); /* Make sure we don't sleep in poll */ -#endif -} - -static int set_driver_data(ErlDrvPort port_num, - int ifd, - int ofd, - int packet_bytes, - int read_write, - int exit_status, - int pid) -{ - Port *prt; - ErtsSysReportExit *report_exit; - - if (!exit_status) - report_exit = NULL; - else { - report_exit = erts_alloc(ERTS_ALC_T_PRT_REP_EXIT, - sizeof(ErtsSysReportExit)); - report_exit->next = report_exit_list; - report_exit->port = erts_drvport2id(port_num); - report_exit->pid = pid; - report_exit->ifd = read_write & DO_READ ? ifd : -1; - report_exit->ofd = read_write & DO_WRITE ? ofd : -1; -#if CHLDWTHR && !defined(ERTS_SMP) - report_exit->status = 0; -#endif - report_exit_list = report_exit; - } - - prt = erts_drvport2port(port_num); - if (prt != ERTS_INVALID_ERL_DRV_PORT) - prt->os_pid = pid; - - if (read_write & DO_READ) { - driver_data[ifd].packet_bytes = packet_bytes; - driver_data[ifd].port_num = port_num; - driver_data[ifd].report_exit = report_exit; - driver_data[ifd].pid = pid; - driver_data[ifd].alive = 1; - driver_data[ifd].status = 0; - if (read_write & DO_WRITE) { - driver_data[ifd].ofd = ofd; - if (ifd != ofd) - driver_data[ofd] = driver_data[ifd]; /* structure copy */ - } else { /* DO_READ only */ - driver_data[ifd].ofd = -1; - } - (void) driver_select(port_num, ifd, (ERL_DRV_READ|ERL_DRV_USE), 1); - return(ifd); - } else { /* DO_WRITE only */ - driver_data[ofd].packet_bytes = packet_bytes; - driver_data[ofd].port_num = port_num; - driver_data[ofd].report_exit = report_exit; - driver_data[ofd].ofd = ofd; - driver_data[ofd].pid = pid; - driver_data[ofd].alive = 1; - driver_data[ofd].status = 0; - return(ofd); - } -} - -static int spawn_init() -{ - int i; -#if CHLDWTHR - erts_thr_opts_t thr_opts = ERTS_THR_OPTS_DEFAULT_INITER; - thr_opts.detached = 0; - thr_opts.suggested_stack_size = 0; /* Smallest possible */ -#endif - - sys_sigset(SIGPIPE, SIG_IGN); /* Ignore - we'll handle the write failure */ - driver_data = (struct driver_data *) - erts_alloc(ERTS_ALC_T_DRV_TAB, max_files * sizeof(struct driver_data)); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, - max_files * sizeof(struct driver_data)); - - for (i = 0; i < max_files; i++) - driver_data[i].pid = -1; - -#if CHLDWTHR - sys_sigblock(SIGCHLD); -#endif - - sys_sigset(SIGCHLD, onchld); /* Reap children */ - -#if CHLDWTHR - erts_thr_create(&child_waiter_tid, child_waiter, NULL, &thr_opts); -#endif - - return 1; -} - -static void close_pipes(int ifd[2], int ofd[2], int read_write) -{ - if (read_write & DO_READ) { - (void) close(ifd[0]); - (void) close(ifd[1]); - } - if (read_write & DO_WRITE) { - (void) close(ofd[0]); - (void) close(ofd[1]); - } -} - -static void init_fd_data(int fd, ErlDrvPort port_num) -{ - fd_data[fd].buf = NULL; - fd_data[fd].cpos = NULL; - fd_data[fd].remain = 0; - fd_data[fd].sz = 0; - fd_data[fd].psz = 0; -} - -static char **build_unix_environment(char *block) -{ - int i; - int j; - int len; - char *cp; - char **cpp; - char** old_env; - - ERTS_SMP_LC_ASSERT(erts_smp_lc_rwmtx_is_rlocked(&environ_rwmtx)); - - cp = block; - len = 0; - while (*cp != '\0') { - cp += strlen(cp) + 1; - len++; - } - old_env = environ; - while (*old_env++ != NULL) { - len++; - } - - cpp = (char **) erts_alloc_fnf(ERTS_ALC_T_ENVIRONMENT, - sizeof(char *) * (len+1)); - if (cpp == NULL) { - return NULL; - } - - cp = block; - len = 0; - while (*cp != '\0') { - cpp[len] = cp; - cp += strlen(cp) + 1; - len++; - } - - i = len; - for (old_env = environ; *old_env; old_env++) { - char* old = *old_env; - - for (j = 0; j < len; j++) { - char *s, *t; - - s = cpp[j]; - t = old; - while (*s == *t && *s != '=') { - s++, t++; - } - if (*s == '=' && *t == '=') { - break; - } - } - - if (j == len) { /* New version not found */ - cpp[len++] = old; - } - } - - for (j = 0; j < i; ) { - size_t last = strlen(cpp[j])-1; - if (cpp[j][last] == '=' && strchr(cpp[j], '=') == cpp[j]+last) { - cpp[j] = cpp[--len]; - if (len < i) { - i--; - } else { - j++; - } - } - else { - j++; - } - } - - cpp[len] = NULL; - return cpp; -} - -/* - [arndt] In most Unix systems, including Solaris 2.5, 'fork' allocates memory - in swap space for the child of a 'fork', whereas 'vfork' does not do this. - The natural call to use here is therefore 'vfork'. Due to a bug in - 'vfork' in Solaris 2.5 (apparently fixed in 2.6), using 'vfork' - can be dangerous in what seems to be these circumstances: - If the child code under a vfork sets the signal action to SIG_DFL - (or SIG_IGN) - for any signal which was previously set to a signal handler, the - state of the parent is clobbered, so that the later arrival of - such a signal yields a sigsegv in the parent. If the signal was - not set to a signal handler, but ignored, all seems to work. - If you change the forking code below, beware of this. - */ - -static ErlDrvData spawn_start(ErlDrvPort port_num, char* name, SysDriverOpts* opts) -{ -#define CMD_LINE_PREFIX_STR "exec " -#define CMD_LINE_PREFIX_STR_SZ (sizeof(CMD_LINE_PREFIX_STR) - 1) - - int ifd[2], ofd[2], len, pid, i; - char **volatile new_environ; /* volatile since a vfork() then cannot - cause 'new_environ' to be clobbered - in the parent process. */ - int saved_errno; - long res; - char *cmd_line; -#ifndef QNX - int unbind; -#endif -#if !DISABLE_VFORK - int no_vfork; - size_t no_vfork_sz = sizeof(no_vfork); - - no_vfork = (erts_sys_getenv_raw("ERL_NO_VFORK", - (char *) &no_vfork, - &no_vfork_sz) >= 0); -#endif - - switch (opts->read_write) { - case DO_READ: - if (pipe(ifd) < 0) - return ERL_DRV_ERROR_ERRNO; - if (ifd[0] >= max_files) { - close_pipes(ifd, ofd, opts->read_write); - errno = EMFILE; - return ERL_DRV_ERROR_ERRNO; - } - ofd[1] = -1; /* keep purify happy */ - break; - case DO_WRITE: - if (pipe(ofd) < 0) return ERL_DRV_ERROR_ERRNO; - if (ofd[1] >= max_files) { - close_pipes(ifd, ofd, opts->read_write); - errno = EMFILE; - return ERL_DRV_ERROR_ERRNO; - } - ifd[0] = -1; /* keep purify happy */ - break; - case DO_READ|DO_WRITE: - if (pipe(ifd) < 0) return ERL_DRV_ERROR_ERRNO; - errno = EMFILE; /* default for next two conditions */ - if (ifd[0] >= max_files || pipe(ofd) < 0) { - close_pipes(ifd, ofd, DO_READ); - return ERL_DRV_ERROR_ERRNO; - } - if (ofd[1] >= max_files) { - close_pipes(ifd, ofd, opts->read_write); - errno = EMFILE; - return ERL_DRV_ERROR_ERRNO; - } - break; - default: - ASSERT(0); - return ERL_DRV_ERROR_GENERAL; - } - - if (opts->spawn_type == ERTS_SPAWN_EXECUTABLE) { - /* started with spawn_executable, not with spawn */ - len = strlen(name); - cmd_line = (char *) erts_alloc_fnf(ERTS_ALC_T_TMP, len + 1); - if (!cmd_line) { - close_pipes(ifd, ofd, opts->read_write); - errno = ENOMEM; - return ERL_DRV_ERROR_ERRNO; - } - memcpy((void *) cmd_line,(void *) name, len); - cmd_line[len] = '\0'; - if (access(cmd_line,X_OK) != 0) { - int save_errno = errno; - erts_free(ERTS_ALC_T_TMP, cmd_line); - errno = save_errno; - return ERL_DRV_ERROR_ERRNO; - } - } else { - /* make the string suitable for giving to "sh" */ - len = strlen(name); - cmd_line = (char *) erts_alloc_fnf(ERTS_ALC_T_TMP, - CMD_LINE_PREFIX_STR_SZ + len + 1); - if (!cmd_line) { - close_pipes(ifd, ofd, opts->read_write); - errno = ENOMEM; - return ERL_DRV_ERROR_ERRNO; - } - memcpy((void *) cmd_line, - (void *) CMD_LINE_PREFIX_STR, - CMD_LINE_PREFIX_STR_SZ); - memcpy((void *) (cmd_line + CMD_LINE_PREFIX_STR_SZ), (void *) name, len); - cmd_line[CMD_LINE_PREFIX_STR_SZ + len] = '\0'; - } - - erts_smp_rwmtx_rlock(&environ_rwmtx); - - if (opts->envir == NULL) { - new_environ = environ; - } else if ((new_environ = build_unix_environment(opts->envir)) == NULL) { - erts_smp_rwmtx_runlock(&environ_rwmtx); - erts_free(ERTS_ALC_T_TMP, (void *) cmd_line); - errno = ENOMEM; - return ERL_DRV_ERROR_ERRNO; - } - -#ifndef QNX - /* Block child from SIGINT and SIGUSR1. Must be before fork() - to be safe. */ - block_signals(); - - CHLD_STAT_LOCK; - - unbind = erts_sched_bind_atfork_prepare(); - -#if !DISABLE_VFORK - /* See fork/vfork discussion before this function. */ - if (no_vfork) { -#endif - - DEBUGF(("Using fork\n")); - pid = fork(); - - if (pid == 0) { - /* The child! Setup child... */ - - if (erts_sched_bind_atfork_child(unbind) != 0) - goto child_error; - - /* OBSERVE! - * Keep child setup after vfork() (implemented below and in - * erl_child_setup.c) up to date if changes are made here. - */ - - if (opts->use_stdio) { - if (opts->read_write & DO_READ) { - /* stdout for process */ - if (dup2(ifd[1], 1) < 0) - goto child_error; - if(opts->redir_stderr) - /* stderr for process */ - if (dup2(ifd[1], 2) < 0) - goto child_error; - } - if (opts->read_write & DO_WRITE) - /* stdin for process */ - if (dup2(ofd[0], 0) < 0) - goto child_error; - } - else { /* XXX will fail if ofd[0] == 4 (unlikely..) */ - if (opts->read_write & DO_READ) - if (dup2(ifd[1], 4) < 0) - goto child_error; - if (opts->read_write & DO_WRITE) - if (dup2(ofd[0], 3) < 0) - goto child_error; - } - - for (i = opts->use_stdio ? 3 : 5; i < max_files; i++) - (void) close(i); - - if (opts->wd && chdir(opts->wd) < 0) - goto child_error; - -#if defined(USE_SETPGRP_NOARGS) /* SysV */ - (void) setpgrp(); -#elif defined(USE_SETPGRP) /* BSD */ - (void) setpgrp(0, getpid()); -#else /* POSIX */ - (void) setsid(); -#endif - - unblock_signals(); - - if (opts->spawn_type == ERTS_SPAWN_EXECUTABLE) { - if (opts->argv == NULL) { - execle(cmd_line,cmd_line,(char *) NULL, new_environ); - } else { - if (opts->argv[0] == erts_default_arg0) { - opts->argv[0] = cmd_line; - } - execve(cmd_line, opts->argv, new_environ); - if (opts->argv[0] == cmd_line) { - opts->argv[0] = erts_default_arg0; - } - } - } else { - execle("/bin/sh", "sh", "-c", cmd_line, (char *) NULL, new_environ); - } - child_error: - _exit(1); - } -#if !DISABLE_VFORK - } -#define ENOUGH_BYTES (44) - else { /* Use vfork() */ - char **cs_argv= erts_alloc(ERTS_ALC_T_TMP,(CS_ARGV_NO_OF_ARGS + 1)* - sizeof(char *)); - char fd_close_range[ENOUGH_BYTES]; /* 44 bytes are enough to */ - char dup2_op[CS_ARGV_NO_OF_DUP2_OPS][ENOUGH_BYTES]; /* hold any "%d:%d" string */ - /* on a 64-bit machine. */ - - /* Setup argv[] for the child setup program (implemented in - erl_child_setup.c) */ - i = 0; - if (opts->use_stdio) { - if (opts->read_write & DO_READ){ - /* stdout for process */ - erts_snprintf(&dup2_op[i++][0], ENOUGH_BYTES, "%d:%d", ifd[1], 1); - if(opts->redir_stderr) - /* stderr for process */ - erts_snprintf(&dup2_op[i++][0], ENOUGH_BYTES, "%d:%d", ifd[1], 2); - } - if (opts->read_write & DO_WRITE) - /* stdin for process */ - erts_snprintf(&dup2_op[i++][0], ENOUGH_BYTES, "%d:%d", ofd[0], 0); - } else { /* XXX will fail if ofd[0] == 4 (unlikely..) */ - if (opts->read_write & DO_READ) - erts_snprintf(&dup2_op[i++][0], ENOUGH_BYTES, "%d:%d", ifd[1], 4); - if (opts->read_write & DO_WRITE) - erts_snprintf(&dup2_op[i++][0], ENOUGH_BYTES, "%d:%d", ofd[0], 3); - } - for (; i < CS_ARGV_NO_OF_DUP2_OPS; i++) - strcpy(&dup2_op[i][0], "-"); - erts_snprintf(fd_close_range, ENOUGH_BYTES, "%d:%d", opts->use_stdio ? 3 : 5, max_files-1); - - cs_argv[CS_ARGV_PROGNAME_IX] = child_setup_prog; - cs_argv[CS_ARGV_WD_IX] = opts->wd ? opts->wd : "."; - cs_argv[CS_ARGV_UNBIND_IX] = erts_sched_bind_atvfork_child(unbind); - cs_argv[CS_ARGV_FD_CR_IX] = fd_close_range; - for (i = 0; i < CS_ARGV_NO_OF_DUP2_OPS; i++) - cs_argv[CS_ARGV_DUP2_OP_IX(i)] = &dup2_op[i][0]; - - if (opts->spawn_type == ERTS_SPAWN_EXECUTABLE) { - int num = 0; - int j = 0; - if (opts->argv != NULL) { - for(; opts->argv[num] != NULL; ++num) - ; - } - cs_argv = erts_realloc(ERTS_ALC_T_TMP,cs_argv, (CS_ARGV_NO_OF_ARGS + 1 + num + 1) * sizeof(char *)); - cs_argv[CS_ARGV_CMD_IX] = "-"; - cs_argv[CS_ARGV_NO_OF_ARGS] = cmd_line; - if (opts->argv != NULL) { - for (;opts->argv[j] != NULL; ++j) { - if (opts->argv[j] == erts_default_arg0) { - cs_argv[CS_ARGV_NO_OF_ARGS + 1 + j] = cmd_line; - } else { - cs_argv[CS_ARGV_NO_OF_ARGS + 1 + j] = opts->argv[j]; - } - } - } - cs_argv[CS_ARGV_NO_OF_ARGS + 1 + j] = NULL; - } else { - cs_argv[CS_ARGV_CMD_IX] = cmd_line; /* Command */ - cs_argv[CS_ARGV_NO_OF_ARGS] = NULL; - } - DEBUGF(("Using vfork\n")); - pid = vfork(); - - if (pid == 0) { - /* The child! */ - - /* Observe! - * OTP-4389: The child setup program (implemented in - * erl_child_setup.c) will perform the necessary setup of the - * child before it execs to the user program. This because - * vfork() only allow an *immediate* execve() or _exit() in the - * child. - */ - execve(child_setup_prog, cs_argv, new_environ); - _exit(1); - } - erts_free(ERTS_ALC_T_TMP,cs_argv); - } -#undef ENOUGH_BYTES -#endif - - erts_sched_bind_atfork_parent(unbind); - - if (pid == -1) { - saved_errno = errno; - CHLD_STAT_UNLOCK; - erts_smp_rwmtx_runlock(&environ_rwmtx); - erts_free(ERTS_ALC_T_TMP, (void *) cmd_line); - unblock_signals(); - close_pipes(ifd, ofd, opts->read_write); - errno = saved_errno; - return ERL_DRV_ERROR_ERRNO; - } -#else /* QNX */ - if (opts->use_stdio) { - if (opts->read_write & DO_READ) - qnx_spawn_options.iov[1] = ifd[1]; /* stdout for process */ - if (opts->read_write & DO_WRITE) - qnx_spawn_options.iov[0] = ofd[0]; /* stdin for process */ - } - else { - if (opts->read_write & DO_READ) - qnx_spawn_options.iov[4] = ifd[1]; - if (opts->read_write & DO_WRITE) - qnx_spawn_options.iov[3] = ofd[0]; - } - /* Close fds on exec */ - for (i = 3; i < max_files; i++) - fcntl(i, F_SETFD, 1); - - qnx_spawn_options.flags = _SPAWN_SETSID; - if ((pid = spawnl(P_NOWAIT, "/bin/sh", "/bin/sh", "-c", cmd_line, - (char *) 0)) < 0) { - erts_free(ERTS_ALC_T_TMP, (void *) cmd_line); - reset_qnx_spawn(); - erts_smp_rwmtx_runlock(&environ_rwmtx); - close_pipes(ifd, ofd, opts->read_write); - return ERL_DRV_ERROR_GENERAL; - } - reset_qnx_spawn(); -#endif /* QNX */ - - erts_free(ERTS_ALC_T_TMP, (void *) cmd_line); - - if (new_environ != environ) - erts_free(ERTS_ALC_T_ENVIRONMENT, (void *) new_environ); - - if (opts->read_write & DO_READ) - (void) close(ifd[1]); - if (opts->read_write & DO_WRITE) - (void) close(ofd[0]); - - if (opts->read_write & DO_READ) { - SET_NONBLOCKING(ifd[0]); - init_fd_data(ifd[0], port_num); - } - if (opts->read_write & DO_WRITE) { - SET_NONBLOCKING(ofd[1]); - init_fd_data(ofd[1], port_num); - } - - res = set_driver_data(port_num, ifd[0], ofd[1], opts->packet_bytes, - opts->read_write, opts->exit_status, pid); - /* Don't unblock SIGCHLD until now, since the call above must - first complete putting away the info about our new subprocess. */ - unblock_signals(); - -#if CHLDWTHR - ASSERT(children_alive >= 0); - - if (!(children_alive++)) - CHLD_STAT_SIGNAL; /* Wake up child waiter thread if no children - was alive before we fork()ed ... */ -#endif - /* Don't unlock chld_stat_mtx until now of the same reason as above */ - CHLD_STAT_UNLOCK; - - erts_smp_rwmtx_runlock(&environ_rwmtx); - - return (ErlDrvData)res; -#undef CMD_LINE_PREFIX_STR -#undef CMD_LINE_PREFIX_STR_SZ -} - -#ifdef QNX -static reset_qnx_spawn() -{ - int i; - - /* Reset qnx_spawn_options */ - qnx_spawn_options.flags = 0; - qnx_spawn_options.iov[0] = 0xff; - qnx_spawn_options.iov[1] = 0xff; - qnx_spawn_options.iov[2] = 0xff; - qnx_spawn_options.iov[3] = 0xff; -} -#endif - -#define FD_DEF_HEIGHT 24 -#define FD_DEF_WIDTH 80 -/* Control op */ -#define FD_CTRL_OP_GET_WINSIZE 100 - -static int fd_get_window_size(int fd, Uint32 *width, Uint32 *height) -{ -#ifdef TIOCGWINSZ - struct winsize ws; - if (ioctl(fd,TIOCGWINSZ,&ws) == 0) { - *width = (Uint32) ws.ws_col; - *height = (Uint32) ws.ws_row; - return 0; - } -#endif - return -1; -} - -static ErlDrvSSizeT fd_control(ErlDrvData drv_data, - unsigned int command, - char *buf, ErlDrvSizeT len, - char **rbuf, ErlDrvSizeT rlen) -{ - int fd = (int)(long)drv_data; - char resbuff[2*sizeof(Uint32)]; - switch (command) { - case FD_CTRL_OP_GET_WINSIZE: - { - Uint32 w,h; - if (fd_get_window_size(fd,&w,&h)) - return 0; - memcpy(resbuff,&w,sizeof(Uint32)); - memcpy(resbuff+sizeof(Uint32),&h,sizeof(Uint32)); - } - break; - default: - return 0; - } - if (rlen < 2*sizeof(Uint32)) { - *rbuf = driver_alloc(2*sizeof(Uint32)); - } - memcpy(*rbuf,resbuff,2*sizeof(Uint32)); - return 2*sizeof(Uint32); -} - -static ErlDrvData fd_start(ErlDrvPort port_num, char* name, - SysDriverOpts* opts) -{ - ErlDrvData res; - - if (((opts->read_write & DO_READ) && opts->ifd >= max_files) || - ((opts->read_write & DO_WRITE) && opts->ofd >= max_files)) - return ERL_DRV_ERROR_GENERAL; - - /* - * Historical: - * - * "Note about nonblocking I/O. - * - * At least on Solaris, setting the write end of a TTY to nonblocking, - * will set the input end to nonblocking as well (and vice-versa). - * If erl is run in a pipeline like this: cat | erl - * the input end of the TTY will be the standard input of cat. - * And cat is not prepared to handle nonblocking I/O." - * - * Actually, the reason for this is not that the tty itself gets set - * in non-blocking mode, but that the "input end" (cat's stdin) and - * the "output end" (erlang's stdout) are typically the "same" file - * descriptor, dup()'ed from a single fd by one of this process' - * ancestors. - * - * The workaround for this problem used to be a rather bad kludge, - * interposing an extra process ("internal cat") between erlang's - * stdout and the original stdout, allowing erlang to set its stdout - * in non-blocking mode without affecting the stdin of the preceding - * process in the pipeline - and being a kludge, it caused all kinds - * of weird problems. - * - * So, this is the current logic: - * - * The only reason to set non-blocking mode on the output fd at all is - * if it's something that can cause a write() to block, of course, - * i.e. primarily if it points to a tty, socket, pipe, or fifo. - * - * If we don't set non-blocking mode when we "should" have, and output - * becomes blocked, the entire runtime system will be suspended - this - * is normally bad of course, and can happen fairly "easily" - e.g. user - * hits ^S on tty - but doesn't necessarily happen. - * - * If we do set non-blocking mode when we "shouldn't" have, the runtime - * system will end up seeing EOF on the input fd (due to the preceding - * process dying), which typically will cause the entire runtime system - * to terminate immediately (due to whatever erlang process is seeing - * the EOF taking it as a signal to halt the system). This is *very* bad. - * - * I.e. we should take a conservative approach, and only set non- - * blocking mode when we a) need to, and b) are reasonably certain - * that it won't be a problem. And as in the example above, the problem - * occurs when input fd and output fd point to different "things". - * - * However, determining that they are not just the same "type" of - * "thing", but actually the same instance of that type of thing, is - * unreasonably complex in many/most cases. - * - * Also, with pipes, sockets, and fifos it's far from obvious that the - * user *wants* non-blocking output: If you're running erlang inside - * some complex pipeline, you're probably not running a real-time system - * that must never stop, but rather *want* it to suspend if the output - * channel is "full". - * - * So, the bottom line: We will only set the output fd non-blocking if - * it points to a tty, and either a) the input fd also points to a tty, - * or b) we can make sure that setting the output fd non-blocking - * doesn't interfere with someone else's input, via a somewhat milder - * kludge than the above. - * - * Also keep in mind that while this code is almost exclusively run as - * a result of an erlang open_port({fd,0,1}, ...), that isn't the only - * case - it can be called with any old pre-existing file descriptors, - * the relations between which (if they're even two) we can only guess - * at - still, we try our best... - */ - - if (opts->read_write & DO_READ) { - init_fd_data(opts->ifd, port_num); - } - if (opts->read_write & DO_WRITE) { - init_fd_data(opts->ofd, port_num); - - /* If we don't have a read end, all bets are off - no non-blocking. */ - if (opts->read_write & DO_READ) { - - if (isatty(opts->ofd)) { /* output fd is a tty:-) */ - - if (isatty(opts->ifd)) { /* input fd is also a tty */ - - /* To really do this "right", we should also check that - input and output fd point to the *same* tty - but - this seems like overkill; ttyname() isn't for free, - and this is a very common case - and it's hard to - imagine a scenario where setting non-blocking mode - here would cause problems - go ahead and do it. */ - - SET_NONBLOCKING(opts->ofd); - - } else { /* output fd is a tty, input fd isn't */ - - /* This is a "problem case", but also common (see the - example above) - i.e. it makes sense to try a bit - harder before giving up on non-blocking mode: Try to - re-open the tty that the output fd points to, and if - successful replace the original one with the "new" fd - obtained this way, and set *that* one in non-blocking - mode. (Yes, this is a kludge.) - - However, re-opening the tty may fail in a couple of - (unusual) cases: - - 1) The name of the tty (or an equivalent one, i.e. - same major/minor number) can't be found, because - it actually lives somewhere other than /dev (or - wherever ttyname() looks for it), and isn't - equivalent to any of those that do live in the - "standard" place - this should be *very* unusual. - - 2) Permissions on the tty don't allow us to open it - - it's perfectly possible to have an fd open to an - object whose permissions wouldn't allow us to open - it. This is not as unusual as it sounds, one case - is if the user has su'ed to someone else (not - root) - we have a read/write fd open to the tty - (because it has been inherited all the way down - here), but we have neither read nor write - permission for the tty. - - In these cases, we finally give up, and don't set the - output fd in non-blocking mode. */ - - char *tty; - int nfd; - - if ((tty = ttyname(opts->ofd)) != NULL && - (nfd = open(tty, O_WRONLY)) != -1) { - dup2(nfd, opts->ofd); - close(nfd); - SET_NONBLOCKING(opts->ofd); - } - } - } - } - } - CHLD_STAT_LOCK; - res = (ErlDrvData)(long)set_driver_data(port_num, opts->ifd, opts->ofd, - opts->packet_bytes, - opts->read_write, 0, -1); - CHLD_STAT_UNLOCK; - return res; -} - -static void clear_fd_data(int fd) -{ - if (fd_data[fd].sz > 0) { - erts_free(ERTS_ALC_T_FD_ENTRY_BUF, (void *) fd_data[fd].buf); - ASSERT(erts_smp_atomic_read_nob(&sys_misc_mem_sz) >= fd_data[fd].sz); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, -1*fd_data[fd].sz); - } - fd_data[fd].buf = NULL; - fd_data[fd].sz = 0; - fd_data[fd].remain = 0; - fd_data[fd].cpos = NULL; - fd_data[fd].psz = 0; -} - -static void nbio_stop_fd(ErlDrvPort prt, int fd) -{ - driver_select(prt,fd,DO_READ|DO_WRITE,0); - clear_fd_data(fd); - SET_BLOCKING(fd); -} - -static void fd_stop(ErlDrvData fd) /* Does not close the fds */ -{ - int ofd; - - nbio_stop_fd(driver_data[(int)(long)fd].port_num, (int)(long)fd); - ofd = driver_data[(int)(long)fd].ofd; - if (ofd != (int)(long)fd && ofd != -1) - nbio_stop_fd(driver_data[(int)(long)fd].port_num, (int)(long)ofd); -} - -static ErlDrvData vanilla_start(ErlDrvPort port_num, char* name, - SysDriverOpts* opts) -{ - int flags, fd; - ErlDrvData res; - - flags = (opts->read_write == DO_READ ? O_RDONLY : - opts->read_write == DO_WRITE ? O_WRONLY|O_CREAT|O_TRUNC : - O_RDWR|O_CREAT); - if ((fd = open(name, flags, 0666)) < 0) - return ERL_DRV_ERROR_GENERAL; - if (fd >= max_files) { - close(fd); - return ERL_DRV_ERROR_GENERAL; - } - SET_NONBLOCKING(fd); - init_fd_data(fd, port_num); - - CHLD_STAT_LOCK; - res = (ErlDrvData)(long)set_driver_data(port_num, fd, fd, - opts->packet_bytes, - opts->read_write, 0, -1); - CHLD_STAT_UNLOCK; - return res; -} - -/* Note that driver_data[fd].ifd == fd if the port was opened for reading, */ -/* otherwise (i.e. write only) driver_data[fd].ofd = fd. */ - -static void stop(ErlDrvData fd) -{ - ErlDrvPort prt; - int ofd; - - prt = driver_data[(int)(long)fd].port_num; - nbio_stop_fd(prt, (int)(long)fd); - - ofd = driver_data[(int)(long)fd].ofd; - if (ofd != (int)(long)fd && (int)(long)ofd != -1) - nbio_stop_fd(prt, ofd); - else - ofd = -1; - - CHLD_STAT_LOCK; - - /* Mark as unused. */ - driver_data[(int)(long)fd].pid = -1; - - CHLD_STAT_UNLOCK; - - /* SMP note: Close has to be last thing done (open file descriptors work - as locks on driver_data[] entries) */ - driver_select(prt, (int)(long)fd, ERL_DRV_USE, 0); /* close(fd); */ - if (ofd >= 0) { - driver_select(prt, (int)(long)ofd, ERL_DRV_USE, 0); /* close(ofd); */ - } -} - -static void outputv(ErlDrvData e, ErlIOVec* ev) -{ - int fd = (int)(long)e; - ErlDrvPort ix = driver_data[fd].port_num; - int pb = driver_data[fd].packet_bytes; - int ofd = driver_data[fd].ofd; - ssize_t n; - ErlDrvSizeT sz; - char lb[4]; - char* lbp; - ErlDrvSizeT len = ev->size; - - /* (len > ((unsigned long)-1 >> (4-pb)*8)) */ - /* if (pb >= 0 && (len & (((ErlDrvSizeT)1 << (pb*8))) - 1) != len) {*/ - if (((pb == 2) && (len > 0xffff)) || (pb == 1 && len > 0xff)) { - driver_failure_posix(ix, EINVAL); - return; /* -1; */ - } - /* Handles 0 <= pb <= 4 only */ - put_int32((Uint32) len, lb); - lbp = lb + (4-pb); - - ev->iov[0].iov_base = lbp; - ev->iov[0].iov_len = pb; - ev->size += pb; - if ((sz = driver_sizeq(ix)) > 0) { - driver_enqv(ix, ev, 0); - if (sz + ev->size >= (1 << 13)) - set_busy_port(ix, 1); - } - else { - int vsize = ev->vsize > MAX_VSIZE ? MAX_VSIZE : ev->vsize; - - n = writev(ofd, (const void *) (ev->iov), vsize); - if (n == ev->size) - return; /* 0;*/ - if (n < 0) { - if ((errno != EINTR) && (errno != ERRNO_BLOCK)) { - driver_failure_posix(ix, errno); - return; /* -1;*/ - } - n = 0; - } - driver_enqv(ix, ev, n); /* n is the skip value */ - driver_select(ix, ofd, ERL_DRV_WRITE|ERL_DRV_USE, 1); - } - /* return 0;*/ -} - - -static void output(ErlDrvData e, char* buf, ErlDrvSizeT len) -{ - int fd = (int)(long)e; - ErlDrvPort ix = driver_data[fd].port_num; - int pb = driver_data[fd].packet_bytes; - int ofd = driver_data[fd].ofd; - ssize_t n; - ErlDrvSizeT sz; - char lb[4]; - char* lbp; - struct iovec iv[2]; - - /* (len > ((unsigned long)-1 >> (4-pb)*8)) */ - if (((pb == 2) && (len > 0xffff)) || (pb == 1 && len > 0xff)) { - driver_failure_posix(ix, EINVAL); - return; /* -1; */ - } - put_int32(len, lb); - lbp = lb + (4-pb); - - if ((sz = driver_sizeq(ix)) > 0) { - driver_enq(ix, lbp, pb); - driver_enq(ix, buf, len); - if (sz + len + pb >= (1 << 13)) - set_busy_port(ix, 1); - } - else { - iv[0].iov_base = lbp; - iv[0].iov_len = pb; /* should work for pb=0 */ - iv[1].iov_base = buf; - iv[1].iov_len = len; - n = writev(ofd, iv, 2); - if (n == pb+len) - return; /* 0; */ - if (n < 0) { - if ((errno != EINTR) && (errno != ERRNO_BLOCK)) { - driver_failure_posix(ix, errno); - return; /* -1; */ - } - n = 0; - } - if (n < pb) { - driver_enq(ix, lbp+n, pb-n); - driver_enq(ix, buf, len); - } - else { - n -= pb; - driver_enq(ix, buf+n, len-n); - } - driver_select(ix, ofd, ERL_DRV_WRITE|ERL_DRV_USE, 1); - } - return; /* 0; */ -} - -static int port_inp_failure(ErlDrvPort port_num, int ready_fd, int res) - /* Result: 0 (eof) or -1 (error) */ -{ - int err = errno; - - ASSERT(res <= 0); - (void) driver_select(port_num, ready_fd, ERL_DRV_READ|ERL_DRV_WRITE, 0); - clear_fd_data(ready_fd); - if (res == 0) { - if (driver_data[ready_fd].report_exit) { - CHLD_STAT_LOCK; - - if (driver_data[ready_fd].alive) { - /* - * We have eof and want to report exit status, but the process - * hasn't exited yet. When it does report_exit_status() will - * driver_select() this fd which will make sure that we get - * back here with driver_data[ready_fd].alive == 0 and - * driver_data[ready_fd].status set. - */ - CHLD_STAT_UNLOCK; - return 0; - } - else { - int status = driver_data[ready_fd].status; - CHLD_STAT_UNLOCK; - - /* We need not be prepared for stopped/continued processes. */ - if (WIFSIGNALED(status)) - status = 128 + WTERMSIG(status); - else - status = WEXITSTATUS(status); - - driver_report_exit(driver_data[ready_fd].port_num, status); - } - } - driver_failure_eof(port_num); - } else { - driver_failure_posix(port_num, err); - } - return 0; -} - -/* fd is the drv_data that is returned from the */ -/* initial start routine */ -/* ready_fd is the descriptor that is ready to read */ - -static void ready_input(ErlDrvData e, ErlDrvEvent ready_fd) -{ - int fd = (int)(long)e; - ErlDrvPort port_num; - int packet_bytes; - int res; - Uint h; - - port_num = driver_data[fd].port_num; - packet_bytes = driver_data[fd].packet_bytes; - - if (packet_bytes == 0) { - byte *read_buf = (byte *) erts_alloc(ERTS_ALC_T_SYS_READ_BUF, - ERTS_SYS_READ_BUF_SZ); - res = read(ready_fd, read_buf, ERTS_SYS_READ_BUF_SZ); - if (res < 0) { - if ((errno != EINTR) && (errno != ERRNO_BLOCK)) - port_inp_failure(port_num, ready_fd, res); - } - else if (res == 0) - port_inp_failure(port_num, ready_fd, res); - else - driver_output(port_num, (char*) read_buf, res); - erts_free(ERTS_ALC_T_SYS_READ_BUF, (void *) read_buf); - } - else if (fd_data[ready_fd].remain > 0) { /* We try to read the remainder */ - /* space is allocated in buf */ - res = read(ready_fd, fd_data[ready_fd].cpos, - fd_data[ready_fd].remain); - if (res < 0) { - if ((errno != EINTR) && (errno != ERRNO_BLOCK)) - port_inp_failure(port_num, ready_fd, res); - } - else if (res == 0) { - port_inp_failure(port_num, ready_fd, res); - } - else if (res == fd_data[ready_fd].remain) { /* we're done */ - driver_output(port_num, fd_data[ready_fd].buf, - fd_data[ready_fd].sz); - clear_fd_data(ready_fd); - } - else { /* if (res < fd_data[ready_fd].remain) */ - fd_data[ready_fd].cpos += res; - fd_data[ready_fd].remain -= res; - } - } - else if (fd_data[ready_fd].remain == 0) { /* clean fd */ - byte *read_buf = (byte *) erts_alloc(ERTS_ALC_T_SYS_READ_BUF, - ERTS_SYS_READ_BUF_SZ); - /* We make one read attempt and see what happens */ - res = read(ready_fd, read_buf, ERTS_SYS_READ_BUF_SZ); - if (res < 0) { - if ((errno != EINTR) && (errno != ERRNO_BLOCK)) - port_inp_failure(port_num, ready_fd, res); - } - else if (res == 0) { /* eof */ - port_inp_failure(port_num, ready_fd, res); - } - else if (res < packet_bytes - fd_data[ready_fd].psz) { - memcpy(fd_data[ready_fd].pbuf+fd_data[ready_fd].psz, - read_buf, res); - fd_data[ready_fd].psz += res; - } - else { /* if (res >= packet_bytes) */ - unsigned char* cpos = read_buf; - int bytes_left = res; - - while (1) { - int psz = fd_data[ready_fd].psz; - char* pbp = fd_data[ready_fd].pbuf + psz; - - while(bytes_left && (psz < packet_bytes)) { - *pbp++ = *cpos++; - bytes_left--; - psz++; - } - - if (psz < packet_bytes) { - fd_data[ready_fd].psz = psz; - break; - } - fd_data[ready_fd].psz = 0; - - switch (packet_bytes) { - case 1: h = get_int8(fd_data[ready_fd].pbuf); break; - case 2: h = get_int16(fd_data[ready_fd].pbuf); break; - case 4: h = get_int32(fd_data[ready_fd].pbuf); break; - default: ASSERT(0); return; /* -1; */ - } - - if (h <= (bytes_left)) { - driver_output(port_num, (char*) cpos, h); - cpos += h; - bytes_left -= h; - continue; - } - else { /* The last message we got was split */ - char *buf = erts_alloc_fnf(ERTS_ALC_T_FD_ENTRY_BUF, h); - if (!buf) { - errno = ENOMEM; - port_inp_failure(port_num, ready_fd, -1); - } - else { - erts_smp_atomic_add_nob(&sys_misc_mem_sz, h); - sys_memcpy(buf, cpos, bytes_left); - fd_data[ready_fd].buf = buf; - fd_data[ready_fd].sz = h; - fd_data[ready_fd].remain = h - bytes_left; - fd_data[ready_fd].cpos = buf + bytes_left; - } - break; - } - } - } - erts_free(ERTS_ALC_T_SYS_READ_BUF, (void *) read_buf); - } -} - - -/* fd is the drv_data that is returned from the */ -/* initial start routine */ -/* ready_fd is the descriptor that is ready to read */ - -static void ready_output(ErlDrvData e, ErlDrvEvent ready_fd) -{ - int fd = (int)(long)e; - ErlDrvPort ix = driver_data[fd].port_num; - int n; - struct iovec* iv; - int vsize; - - - if ((iv = (struct iovec*) driver_peekq(ix, &vsize)) == NULL) { - driver_select(ix, ready_fd, ERL_DRV_WRITE, 0); - return; /* 0; */ - } - vsize = vsize > MAX_VSIZE ? MAX_VSIZE : vsize; - if ((n = writev(ready_fd, iv, vsize)) > 0) { - if (driver_deq(ix, n) == 0) - set_busy_port(ix, 0); - } - else if (n < 0) { - if (errno == ERRNO_BLOCK || errno == EINTR) - return; /* 0; */ - else { - int res = errno; - driver_select(ix, ready_fd, ERL_DRV_WRITE, 0); - driver_failure_posix(ix, res); - return; /* -1; */ - } - } - return; /* 0; */ -} - -static void stop_select(ErlDrvEvent fd, void* _) -{ - close((int)fd); -} - - void erts_do_break_handling(void) { struct termios temp_mode; @@ -2489,13 +1004,19 @@ erts_sys_getenv(char *key, char *value, size_t *size) return res; } +int +erts_sys_unsetenv(char *key) +{ + int res; + erts_smp_rwmtx_rwlock(&environ_rwmtx); + res = unsetenv(key); + erts_smp_rwmtx_rwunlock(&environ_rwmtx); + return res; +} + void sys_init_io(void) { - fd_data = (struct fd_data *) - erts_alloc(ERTS_ALC_T_FD_TAB, max_files * sizeof(struct fd_data)); - erts_smp_atomic_add_nob(&sys_misc_mem_sz, - max_files * sizeof(struct fd_data)); } #if (0) /* unused? */ @@ -2524,6 +1045,52 @@ void erts_sys_alloc_init(void) { } +#if ERTS_HAVE_ERTS_SYS_ALIGNED_ALLOC +void *erts_sys_aligned_alloc(UWord alignment, UWord size) +{ +#ifdef HAVE_POSIX_MEMALIGN + void *ptr = NULL; + int error; + ASSERT(alignment && (alignment & (alignment-1)) == 0); /* power of 2 */ + error = posix_memalign(&ptr, (size_t) alignment, (size_t) size); +#if HAVE_ERTS_MSEG + if (error || !ptr) { + erts_mseg_clear_cache(); + error = posix_memalign(&ptr, (size_t) alignment, (size_t) size); + } +#endif + if (error) { + errno = error; + return NULL; + } + if (!ptr) + errno = ENOMEM; + ASSERT(!ptr || (((UWord) ptr) & (alignment - 1)) == 0); + return ptr; +#else +# error "Missing erts_sys_aligned_alloc() implementation" +#endif +} + +void erts_sys_aligned_free(UWord alignment, void *ptr) +{ + ASSERT(alignment && (alignment & (alignment-1)) == 0); /* power of 2 */ + free(ptr); +} + +void *erts_sys_aligned_realloc(UWord alignment, void *ptr, UWord size, UWord old_size) +{ + void *new_ptr = erts_sys_aligned_alloc(alignment, size); + if (new_ptr) { + UWord copy_size = old_size < size ? old_size : size; + sys_memcpy(new_ptr, ptr, (size_t) copy_size); + erts_sys_aligned_free(alignment, ptr); + } + return new_ptr; +} + +#endif + void *erts_sys_alloc(ErtsAlcType_t t, void *x, Uint sz) { void *res = malloc((size_t) sz); @@ -2574,33 +1141,43 @@ void sys_preload_end(Preload* p) /* Nothing */ } -/* Read a key from console (?) */ - +/* Read a key from console, used by break.c + Here we assume that all schedulers are stopped so that erl_poll + does not interfere with the select below. +*/ int sys_get_key(fd) int fd; { - int c; + int c, ret; unsigned char rbuf[64]; + fd_set fds; fflush(stdout); /* Flush query ??? */ - if ((c = read(fd,rbuf,64)) <= 0) { - return c; + FD_ZERO(&fds); + FD_SET(fd,&fds); + + ret = select(fd+1, &fds, NULL, NULL, NULL); + + if (ret == 1) { + do { + c = read(fd,rbuf,64); + } while (c < 0 && errno == EAGAIN); + if (c <= 0) + return c; } return rbuf[0]; } -#ifdef DEBUG - extern int erts_initialized; void -erl_assert_error(char* expr, char* file, int line) +erl_assert_error(const char* expr, const char* func, const char* file, int line) { fflush(stdout); - fprintf(stderr, "Assertion failed: %s in %s, line %d\n", - expr, file, line); + fprintf(stderr, "%s:%d:%s() Assertion failed: %s\n", + file, line, func, expr); fflush(stderr); #if !defined(ERTS_SMP) && 0 /* Writing a crashdump from a failed assertion when smp support @@ -2615,6 +1192,8 @@ erl_assert_error(char* expr, char* file, int line) abort(); } +#ifdef DEBUG + void erl_debug(char* fmt, ...) { @@ -2631,179 +1210,6 @@ erl_debug(char* fmt, ...) #endif /* DEBUG */ -static ERTS_INLINE void -report_exit_status(ErtsSysReportExit *rep, int status) -{ - Port *pp; -#ifdef ERTS_SMP - CHLD_STAT_UNLOCK; - pp = erts_thr_id2port_sflgs(rep->port, - ERTS_PORT_SFLGS_INVALID_DRIVER_LOOKUP); - CHLD_STAT_LOCK; -#else - pp = erts_id2port_sflgs(rep->port, - NULL, - 0, - ERTS_PORT_SFLGS_INVALID_DRIVER_LOOKUP); -#endif - if (pp) { - if (rep->ifd >= 0) { - driver_data[rep->ifd].alive = 0; - driver_data[rep->ifd].status = status; - (void) driver_select(ERTS_Port2ErlDrvPort(pp), - rep->ifd, - (ERL_DRV_READ|ERL_DRV_USE), - 1); - } - if (rep->ofd >= 0) { - driver_data[rep->ofd].alive = 0; - driver_data[rep->ofd].status = status; - (void) driver_select(ERTS_Port2ErlDrvPort(pp), - rep->ofd, - (ERL_DRV_WRITE|ERL_DRV_USE), - 1); - } -#ifdef ERTS_SMP - erts_thr_port_release(pp); -#else - erts_port_release(pp); -#endif - } - erts_free(ERTS_ALC_T_PRT_REP_EXIT, rep); -} - -#if !CHLDWTHR /* ---------------------------------------------------------- */ - -#define ERTS_REPORT_EXIT_STATUS report_exit_status - -static int check_children(void) -{ - int res = 0; - int pid; - int status; - -#ifndef ERTS_SMP - if (children_died) -#endif - { - sys_sigblock(SIGCHLD); - CHLD_STAT_LOCK; - while ((pid = waitpid(-1, &status, WNOHANG)) > 0) - note_child_death(pid, status); -#ifndef ERTS_SMP - children_died = 0; -#endif - CHLD_STAT_UNLOCK; - sys_sigrelease(SIGCHLD); - res = 1; - } - return res; -} - -#ifdef ERTS_SMP - -void -erts_check_children(void) -{ - (void) check_children(); -} - -#endif - -#elif CHLDWTHR && defined(ERTS_SMP) /* ------------------------------------- */ - -#define ERTS_REPORT_EXIT_STATUS report_exit_status - -#define check_children() (0) - - -#else /* CHLDWTHR && !defined(ERTS_SMP) ------------------------------------ */ - -#define ERTS_REPORT_EXIT_STATUS initiate_report_exit_status - -static ERTS_INLINE void -initiate_report_exit_status(ErtsSysReportExit *rep, int status) -{ - rep->next = report_exit_transit_list; - rep->status = status; - report_exit_transit_list = rep; - erts_sys_schedule_interrupt(1); -} - -static int check_children(void) -{ - int res; - ErtsSysReportExit *rep; - CHLD_STAT_LOCK; - rep = report_exit_transit_list; - res = rep != NULL; - while (rep) { - ErtsSysReportExit *curr_rep = rep; - rep = rep->next; - report_exit_status(curr_rep, curr_rep->status); - } - report_exit_transit_list = NULL; - CHLD_STAT_UNLOCK; - return res; -} - -#endif /* ------------------------------------------------------------------ */ - -static void note_child_death(int pid, int status) -{ - ErtsSysReportExit **repp = &report_exit_list; - ErtsSysReportExit *rep = report_exit_list; - - while (rep) { - if (pid == rep->pid) { - *repp = rep->next; - ERTS_REPORT_EXIT_STATUS(rep, status); - break; - } - repp = &rep->next; - rep = rep->next; - } -} - -#if CHLDWTHR - -static void * -child_waiter(void *unused) -{ - int pid; - int status; - -#ifdef ERTS_ENABLE_LOCK_CHECK - erts_lc_set_thread_name("child waiter"); -#endif - - while(1) { -#ifdef DEBUG - int waitpid_errno; -#endif - pid = waitpid(-1, &status, 0); -#ifdef DEBUG - waitpid_errno = errno; -#endif - CHLD_STAT_LOCK; - if (pid < 0) { - ASSERT(waitpid_errno == ECHILD); - } - else { - children_alive--; - ASSERT(children_alive >= 0); - note_child_death(pid, status); - } - while (!children_alive) - CHLD_STAT_WAIT; /* Wait for children to wait on... :) */ - CHLD_STAT_UNLOCK; - } - - return NULL; -} - -#endif - /* * Called from schedule() when it runs out of runnable processes, * or when Erlang code has performed INPUT_REDUCTIONS reduction @@ -2812,13 +1218,8 @@ child_waiter(void *unused) void erl_sys_schedule(int runnable) { -#ifdef ERTS_SMP ERTS_CHK_IO(!runnable); -#else - ERTS_CHK_IO(runnable ? 0 : !check_children()); -#endif ERTS_SMP_LC_ASSERT(!erts_thr_progress_is_blocking()); - (void) check_children(); } @@ -2846,10 +1247,6 @@ smp_sig_notify(char c) static void * signal_dispatcher_thread_func(void *unused) { -#if !CHLDWTHR - int initialized = 0; - int notify_check_children = 0; -#endif #ifdef ERTS_ENABLE_LOCK_CHECK erts_lc_set_thread_name("signal_dispatcher"); #endif @@ -2861,7 +1258,7 @@ signal_dispatcher_thread_func(void *unused) if (res < 0) { if (errno == EINTR) continue; - erl_exit(ERTS_ABORT_EXIT, + erts_exit(ERTS_ABORT_EXIT, "signal-dispatcher thread got unexpected error: %s (%d)\n", erl_errno_id(errno), errno); @@ -2887,19 +1284,7 @@ signal_dispatcher_thread_func(void *unused) */ switch (buf[i]) { case 0: /* Emulator initialized */ -#if !CHLDWTHR - initialized = 1; - if (!notify_check_children) -#endif - break; -#if !CHLDWTHR - case 'C': /* SIGCHLD */ - if (initialized) - erts_smp_notify_check_children_needed(); - else - notify_check_children = 1; - break; -#endif + break; case 'I': /* SIGINT */ break_requested(); break; @@ -2909,15 +1294,8 @@ signal_dispatcher_thread_func(void *unused) case '1': /* SIGUSR1 */ sigusr1_exit(); break; -#ifdef QUANTIFY - case '2': /* SIGUSR2 */ - quantify_save_data(); /* Might take a substantial amount of - time, but this is a test/debug - build */ - break; -#endif default: - erl_exit(ERTS_ABORT_EXIT, + erts_exit(ERTS_ABORT_EXIT, "signal-dispatcher thread received unknown " "signal notification: '%c'\n", buf[i]); @@ -2933,9 +1311,10 @@ init_smp_sig_notify(void) { erts_smp_thr_opts_t thr_opts = ERTS_SMP_THR_OPTS_DEFAULT_INITER; thr_opts.detached = 1; + thr_opts.name = "sys_sig_dispatcher"; if (pipe(sig_notify_fds) < 0) { - erl_exit(ERTS_ABORT_EXIT, + erts_exit(ERTS_ABORT_EXIT, "Failed to create signal-dispatcher pipe: %s (%d)\n", erl_errno_id(errno), errno); @@ -2947,6 +1326,19 @@ init_smp_sig_notify(void) NULL, &thr_opts); } + +static void +init_smp_sig_suspend(void) { +#ifdef ERTS_SYS_SUSPEND_SIGNAL + if (pipe(sig_suspend_fds) < 0) { + erts_exit(ERTS_ABORT_EXIT, + "Failed to create sig_suspend pipe: %s (%d)\n", + erl_errno_id(errno), + errno); + } +#endif +} + #ifdef __DARWIN__ int erts_darwin_main_thread_pipe[2]; @@ -2956,7 +1348,7 @@ static void initialize_darwin_main_thread_pipes(void) { if (pipe(erts_darwin_main_thread_pipe) < 0 || pipe(erts_darwin_main_thread_result_pipe) < 0) { - erl_exit(1,"Fatal error initializing Darwin main thread stealing"); + erts_exit(ERTS_ERROR_EXIT,"Fatal error initializing Darwin main thread stealing"); } } @@ -2974,9 +1366,11 @@ erts_sys_main_thread(void) #endif smp_sig_notify(0); /* Notify initialized */ - while (1) { - /* Wait for a signal to arrive... */ + + /* Wait for a signal to arrive... */ + #ifdef __DARWIN__ + while (1) { /* * The wx driver needs to be able to steal the main thread for Cocoa to * work properly. @@ -2991,12 +1385,24 @@ erts_sys_main_thread(void) void* (*func)(void*); void* arg; void *resp; - read(erts_darwin_main_thread_pipe[0],&func,sizeof(void* (*)(void*))); - read(erts_darwin_main_thread_pipe[0],&arg, sizeof(void*)); + res = read(erts_darwin_main_thread_pipe[0],&func,sizeof(void* (*)(void*))); + if (res != sizeof(void* (*)(void*))) + break; + res = read(erts_darwin_main_thread_pipe[0],&arg,sizeof(void*)); + if (res != sizeof(void*)) + break; resp = (*func)(arg); write(erts_darwin_main_thread_result_pipe[1],&resp,sizeof(void *)); } -#else + + if (res == -1 && errno != EINTR) + break; + } + /* Something broke with the main thread pipe, so we ignore it for now. + Most probably erts has closed this pipe and is about to exit. */ +#endif /* #ifdef __DARWIN__ */ + + while (1) { #ifdef DEBUG int res = #else @@ -3005,7 +1411,6 @@ erts_sys_main_thread(void) select(0, NULL, NULL, NULL, NULL); ASSERT(res < 0); ASSERT(errno == EINTR); -#endif } } @@ -3097,6 +1502,7 @@ erl_sys_args(int* argc, char** argv) #ifdef ERTS_SMP init_smp_sig_notify(); + init_smp_sig_suspend(); #endif /* Handled arguments have been marked with NULL. Slide arguments |