diff options
Diffstat (limited to 'erts/emulator/sys/unix/sys_drivers.c')
-rw-r--r-- | erts/emulator/sys/unix/sys_drivers.c | 109 |
1 files changed, 63 insertions, 46 deletions
diff --git a/erts/emulator/sys/unix/sys_drivers.c b/erts/emulator/sys/unix/sys_drivers.c index 117855acf0..d0498f0bd5 100644 --- a/erts/emulator/sys/unix/sys_drivers.c +++ b/erts/emulator/sys/unix/sys_drivers.c @@ -1,7 +1,7 @@ /* * %CopyrightBegin% * - * Copyright Ericsson AB 1996-2017. All Rights Reserved. + * Copyright Ericsson AB 1996-2018. All Rights Reserved. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. @@ -685,7 +685,7 @@ static ErlDrvData spawn_start(ErlDrvPort port_num, char* name, /* we send the request to do the fork */ if ((res = writev(ofd[1], io_vector, iov_len > MAXIOV ? MAXIOV : iov_len)) < 0) { - if (errno == ERRNO_BLOCK) { + if (errno == ERRNO_BLOCK || errno == EINTR) { res = 0; } else { int err = errno; @@ -1257,6 +1257,8 @@ static int port_inp_failure(ErtsSysDriverData *dd, int res) } driver_failure_eof(dd->port_num); } else if (dd->ifd) { + if (dd->alive == -1) + errno = dd->status; erl_drv_init_ack(dd->port_num, ERL_DRV_ERROR_ERRNO); } else { driver_failure_posix(dd->port_num, err); @@ -1287,10 +1289,10 @@ static void ready_input(ErlDrvData e, ErlDrvEvent ready_fd) int res; if((res = read(ready_fd, &proto, sizeof(proto))) <= 0) { + if (res < 0 && (errno == ERRNO_BLOCK || errno == EINTR)) + return; /* hmm, child setup seems to have closed the pipe too early... we close the port as there is not much else we can do */ - if (res < 0 && errno == ERRNO_BLOCK) - return; driver_select(port_num, ready_fd, ERL_DRV_READ, 0); if (res == 0) errno = EPIPE; @@ -1424,7 +1426,7 @@ static void ready_input(ErlDrvData e, ErlDrvEvent ready_fd) continue; } else { /* The last message we got was split */ - char *buf = erts_alloc_fnf(ERTS_ALC_T_FD_ENTRY_BUF, h); + char *buf = erts_alloc_fnf(ERTS_ALC_T_FD_ENTRY_BUF, h); if (!buf) { errno = ENOMEM; port_inp_failure(dd, -1); @@ -1670,15 +1672,37 @@ static void forker_stop(ErlDrvData e) the port has been closed by the user. */ } +static ErlDrvSizeT forker_deq(ErlDrvPort port_num, ErtsSysForkerProto *proto) +{ + close(proto->u.start.fds[0]); + close(proto->u.start.fds[1]); + if (proto->u.start.fds[1] != proto->u.start.fds[2]) + close(proto->u.start.fds[2]); + + return driver_deq(port_num, sizeof(*proto)); +} + +static void forker_sigchld(Eterm port_id, int error) +{ + ErtsSysForkerProto *proto = erts_alloc(ERTS_ALC_T_DRV_CTRL_DATA, sizeof(*proto)); + proto->action = ErtsSysForkerProtoAction_SigChld; + proto->u.sigchld.error_number = error; + proto->u.sigchld.port_id = port_id; + + /* ideally this would be a port_command call, but as command is + already used by the spawn_driver, we use control instead. + Note that when using erl_drv_port_control it is an asynchronous + control. */ + erl_drv_port_control(port_id, 'S', (char*)proto, sizeof(*proto)); +} + static void forker_ready_input(ErlDrvData e, ErlDrvEvent fd) { int res; - ErtsSysForkerProto *proto; + ErtsSysForkerProto proto; - proto = erts_alloc(ERTS_ALC_T_DRV_CTRL_DATA, sizeof(*proto)); - - if ((res = read(fd, proto, sizeof(*proto))) < 0) { - if (errno == ERRNO_BLOCK) + if ((res = read(fd, &proto, sizeof(proto))) < 0) { + if (errno == ERRNO_BLOCK || errno == EINTR) return; erts_exit(ERTS_DUMP_EXIT, "Failed to read from erl_child_setup: %d\n", errno); } @@ -1686,10 +1710,10 @@ static void forker_ready_input(ErlDrvData e, ErlDrvEvent fd) if (res == 0) erts_exit(ERTS_DUMP_EXIT, "erl_child_setup closed\n"); - ASSERT(res == sizeof(*proto)); + ASSERT(res == sizeof(proto)); #ifdef FORKER_PROTO_START_ACK - if (proto->action == ErtsSysForkerProtoAction_StartAck) { + if (proto.action == ErtsSysForkerProtoAction_StartAck) { /* Ideally we would like to not have to ack each Start command being sent over the uds, but it would seem that some operating systems (only observed on FreeBSD) @@ -1699,28 +1723,15 @@ static void forker_ready_input(ErlDrvData e, ErlDrvEvent fd) ErlDrvPort port_num = (ErlDrvPort)e; int vlen; SysIOVec *iov = driver_peekq(port_num, &vlen); - ErtsSysForkerProto *proto = (ErtsSysForkerProto *)iov[0].iov_base; - - close(proto->u.start.fds[0]); - close(proto->u.start.fds[1]); - if (proto->u.start.fds[1] != proto->u.start.fds[2]) - close(proto->u.start.fds[2]); + ErtsSysForkerProto *qproto = (ErtsSysForkerProto *)iov[0].iov_base; - driver_deq(port_num, sizeof(*proto)); - - if (driver_sizeq(port_num) > 0) + if (forker_deq(port_num, qproto)) driver_select(port_num, forker_fd, ERL_DRV_WRITE|ERL_DRV_USE, 1); } else #endif { - ASSERT(proto->action == ErtsSysForkerProtoAction_SigChld); - - /* ideally this would be a port_command call, but as command is - already used by the spawn_driver, we use control instead. - Note that when using erl_drv_port_control it is an asynchronous - control. */ - erl_drv_port_control(proto->u.sigchld.port_id, 'S', - (char*)proto, sizeof(*proto)); + ASSERT(proto.action == ErtsSysForkerProtoAction_SigChld); + forker_sigchld(proto.u.sigchld.port_id, proto.u.sigchld.error_number); } } @@ -1730,7 +1741,8 @@ static void forker_ready_output(ErlDrvData e, ErlDrvEvent fd) ErlDrvPort port_num = (ErlDrvPort)e; #ifndef FORKER_PROTO_START_ACK - while (driver_sizeq(port_num) > 0) { + int loops = 10; + while (driver_sizeq(port_num) > 0 && --loops) { #endif int vlen; SysIOVec *iov = driver_peekq(port_num, &vlen); @@ -1738,20 +1750,24 @@ static void forker_ready_output(ErlDrvData e, ErlDrvEvent fd) ASSERT(iov[0].iov_len >= (sizeof(*proto))); if (sys_uds_write(forker_fd, (char*)proto, sizeof(*proto), proto->u.start.fds, 3, 0) < 0) { - if (errno == ERRNO_BLOCK) + if (errno == ERRNO_BLOCK || errno == EINTR) { return; - erts_exit(ERTS_DUMP_EXIT, "Failed to write to erl_child_setup: %d\n", errno); + } else if (errno == EMFILE) { + forker_sigchld(proto->u.start.port_id, errno); + if (forker_deq(port_num, proto) == 0) + driver_select(port_num, forker_fd, ERL_DRV_WRITE, 0); + return; + } else { + erts_exit(ERTS_DUMP_EXIT, "Failed to write to erl_child_setup: %d\n", errno); + } } #ifndef FORKER_PROTO_START_ACK - close(proto->u.start.fds[0]); - close(proto->u.start.fds[1]); - if (proto->u.start.fds[1] != proto->u.start.fds[2]) - close(proto->u.start.fds[2]); - driver_deq(port_num, sizeof(*proto)); + if (forker_deq(port_num, proto) == 0) + driver_select(port_num, forker_fd, ERL_DRV_WRITE, 0); } -#endif - +#else driver_select(port_num, forker_fd, ERL_DRV_WRITE, 0); +#endif } static ErlDrvSSizeT forker_control(ErlDrvData e, unsigned int cmd, char *buf, @@ -1777,20 +1793,21 @@ static ErlDrvSSizeT forker_control(ErlDrvData e, unsigned int cmd, char *buf, if ((res = sys_uds_write(forker_fd, (char*)proto, sizeof(*proto), proto->u.start.fds, 3, 0)) < 0) { - if (errno == ERRNO_BLOCK) { + if (errno == ERRNO_BLOCK || errno == EINTR) { driver_select(port_num, forker_fd, ERL_DRV_WRITE|ERL_DRV_USE, 1); return 0; + } else if (errno == EMFILE) { + forker_sigchld(proto->u.start.port_id, errno); + forker_deq(port_num, proto); + return 0; + } else { + erts_exit(ERTS_DUMP_EXIT, "Failed to write to erl_child_setup: %d\n", errno); } - erts_exit(ERTS_DUMP_EXIT, "Failed to write to erl_child_setup: %d\n", errno); } #ifndef FORKER_PROTO_START_ACK ASSERT(res == sizeof(*proto)); - close(proto->u.start.fds[0]); - close(proto->u.start.fds[1]); - if (proto->u.start.fds[1] != proto->u.start.fds[2]) - close(proto->u.start.fds[2]); - driver_deq(port_num, sizeof(*proto)); + forker_deq(port_num, proto); #endif return 0; |