diff options
Diffstat (limited to 'erts/emulator/sys/unix/sys_drivers.c')
-rw-r--r-- | erts/emulator/sys/unix/sys_drivers.c | 135 |
1 files changed, 81 insertions, 54 deletions
diff --git a/erts/emulator/sys/unix/sys_drivers.c b/erts/emulator/sys/unix/sys_drivers.c index 872c3a80b1..664d677ebd 100644 --- a/erts/emulator/sys/unix/sys_drivers.c +++ b/erts/emulator/sys/unix/sys_drivers.c @@ -685,7 +685,7 @@ static ErlDrvData spawn_start(ErlDrvPort port_num, char* name, /* we send the request to do the fork */ if ((res = writev(ofd[1], io_vector, iov_len > MAXIOV ? MAXIOV : iov_len)) < 0) { - if (errno == ERRNO_BLOCK) { + if (errno == ERRNO_BLOCK || errno == EINTR) { res = 0; } else { int err = errno; @@ -732,7 +732,8 @@ static ErlDrvData spawn_start(ErlDrvPort port_num, char* name, proto->u.start.fds[1] = ifd[1]; proto->u.start.fds[2] = stderrfd; proto->u.start.port_id = opts->exit_status ? erts_drvport2id(port_num) : THE_NON_VALUE; - if (erl_drv_port_control(forker_port, 'S', (char*)proto, sizeof(*proto))) { + if (erl_drv_port_control(forker_port, ERTS_FORKER_DRV_CONTROL_MAGIC_NUMBER, + (char*)proto, sizeof(*proto))) { /* The forker port has been killed, we close both fd's which will make open_port throw an epipe error */ close(ofd[0]); @@ -759,6 +760,9 @@ static ErlDrvSSizeT spawn_control(ErlDrvData e, unsigned int cmd, char *buf, ErtsSysDriverData *dd = (ErtsSysDriverData*)e; ErtsSysForkerProto *proto = (ErtsSysForkerProto *)buf; + if (cmd != ERTS_SPAWN_DRV_CONTROL_MAGIC_NUMBER) + return -1; + ASSERT(len == sizeof(*proto)); ASSERT(proto->action == ErtsSysForkerProtoAction_SigChld); @@ -799,6 +803,8 @@ static ErlDrvSSizeT fd_control(ErlDrvData drv_data, { int fd = (int)(long)drv_data; char resbuff[2*sizeof(Uint32)]; + + command -= ERTS_TTYSL_DRV_CONTROL_MAGIC_NUMBER; switch (command) { case FD_CTRL_OP_GET_WINSIZE: { @@ -810,7 +816,7 @@ static ErlDrvSSizeT fd_control(ErlDrvData drv_data, } break; default: - return 0; + return -1; } if (rlen < 2*sizeof(Uint32)) { *rbuf = driver_alloc(2*sizeof(Uint32)); @@ -998,12 +1004,10 @@ static void clear_fd_data(ErtsSysFdData *fdd) fdd->psz = 0; } -static void nbio_stop_fd(ErlDrvPort prt, ErtsSysFdData *fdd) +static void nbio_stop_fd(ErlDrvPort prt, ErtsSysFdData *fdd, int use) { - driver_select(prt, abs(fdd->fd), DO_READ|DO_WRITE, 0); clear_fd_data(fdd); SET_BLOCKING(abs(fdd->fd)); - } static void fd_stop(ErlDrvData ev) /* Does not close the fds */ @@ -1020,11 +1024,13 @@ static void fd_stop(ErlDrvData ev) /* Does not close the fds */ if (dd->ifd) { sz += sizeof(ErtsSysFdData); - nbio_stop_fd(prt, dd->ifd); + driver_select(prt, abs(dd->ifd->fd), ERL_DRV_USE_NO_CALLBACK|DO_READ|DO_WRITE, 0); + nbio_stop_fd(prt, dd->ifd, 1); } if (dd->ofd && dd->ofd != dd->ifd) { sz += sizeof(ErtsSysFdData); - nbio_stop_fd(prt, dd->ofd); + driver_select(prt, abs(dd->ofd->fd), ERL_DRV_USE_NO_CALLBACK|DO_WRITE, 0); + nbio_stop_fd(prt, dd->ofd, 1); } erts_free(ERTS_ALC_T_DRV_TAB, dd); @@ -1070,12 +1076,12 @@ static void stop(ErlDrvData ev) ErlDrvPort prt = dd->port_num; if (dd->ifd) { - nbio_stop_fd(prt, dd->ifd); + nbio_stop_fd(prt, dd->ifd, 0); driver_select(prt, abs(dd->ifd->fd), ERL_DRV_USE, 0); /* close(ifd); */ } if (dd->ofd && dd->ofd != dd->ifd) { - nbio_stop_fd(prt, dd->ofd); + nbio_stop_fd(prt, dd->ofd, 0); driver_select(prt, abs(dd->ofd->fd), ERL_DRV_USE, 0); /* close(ofd); */ } @@ -1257,6 +1263,8 @@ static int port_inp_failure(ErtsSysDriverData *dd, int res) } driver_failure_eof(dd->port_num); } else if (dd->ifd) { + if (dd->alive == -1) + errno = dd->status; erl_drv_init_ack(dd->port_num, ERL_DRV_ERROR_ERRNO); } else { driver_failure_posix(dd->port_num, err); @@ -1287,10 +1295,10 @@ static void ready_input(ErlDrvData e, ErlDrvEvent ready_fd) int res; if((res = read(ready_fd, &proto, sizeof(proto))) <= 0) { + if (res < 0 && (errno == ERRNO_BLOCK || errno == EINTR)) + return; /* hmm, child setup seems to have closed the pipe too early... we close the port as there is not much else we can do */ - if (res < 0 && errno == ERRNO_BLOCK) - return; driver_select(port_num, ready_fd, ERL_DRV_READ, 0); if (res == 0) errno = EPIPE; @@ -1424,7 +1432,7 @@ static void ready_input(ErlDrvData e, ErlDrvEvent ready_fd) continue; } else { /* The last message we got was split */ - char *buf = erts_alloc_fnf(ERTS_ALC_T_FD_ENTRY_BUF, h); + char *buf = erts_alloc_fnf(ERTS_ALC_T_FD_ENTRY_BUF, h); if (!buf) { errno = ENOMEM; port_inp_failure(dd, -1); @@ -1670,15 +1678,38 @@ static void forker_stop(ErlDrvData e) the port has been closed by the user. */ } +static ErlDrvSizeT forker_deq(ErlDrvPort port_num, ErtsSysForkerProto *proto) +{ + close(proto->u.start.fds[0]); + close(proto->u.start.fds[1]); + if (proto->u.start.fds[1] != proto->u.start.fds[2]) + close(proto->u.start.fds[2]); + + return driver_deq(port_num, sizeof(*proto)); +} + +static void forker_sigchld(Eterm port_id, int error) +{ + ErtsSysForkerProto *proto = erts_alloc(ERTS_ALC_T_DRV_CTRL_DATA, sizeof(*proto)); + proto->action = ErtsSysForkerProtoAction_SigChld; + proto->u.sigchld.error_number = error; + proto->u.sigchld.port_id = port_id; + + /* ideally this would be a port_command call, but as command is + already used by the spawn_driver, we use control instead. + Note that when using erl_drv_port_control it is an asynchronous + control. */ + erl_drv_port_control(port_id, ERTS_SPAWN_DRV_CONTROL_MAGIC_NUMBER, + (char*)proto, sizeof(*proto)); +} + static void forker_ready_input(ErlDrvData e, ErlDrvEvent fd) { int res; - ErtsSysForkerProto *proto; + ErtsSysForkerProto proto; - proto = erts_alloc(ERTS_ALC_T_DRV_CTRL_DATA, sizeof(*proto)); - - if ((res = read(fd, proto, sizeof(*proto))) < 0) { - if (errno == ERRNO_BLOCK) + if ((res = read(fd, &proto, sizeof(proto))) < 0) { + if (errno == ERRNO_BLOCK || errno == EINTR) return; erts_exit(ERTS_DUMP_EXIT, "Failed to read from erl_child_setup: %d\n", errno); } @@ -1686,10 +1717,10 @@ static void forker_ready_input(ErlDrvData e, ErlDrvEvent fd) if (res == 0) erts_exit(ERTS_DUMP_EXIT, "erl_child_setup closed\n"); - ASSERT(res == sizeof(*proto)); + ASSERT(res == sizeof(proto)); #ifdef FORKER_PROTO_START_ACK - if (proto->action == ErtsSysForkerProtoAction_StartAck) { + if (proto.action == ErtsSysForkerProtoAction_StartAck) { /* Ideally we would like to not have to ack each Start command being sent over the uds, but it would seem that some operating systems (only observed on FreeBSD) @@ -1699,28 +1730,15 @@ static void forker_ready_input(ErlDrvData e, ErlDrvEvent fd) ErlDrvPort port_num = (ErlDrvPort)e; int vlen; SysIOVec *iov = driver_peekq(port_num, &vlen); - ErtsSysForkerProto *proto = (ErtsSysForkerProto *)iov[0].iov_base; - - close(proto->u.start.fds[0]); - close(proto->u.start.fds[1]); - if (proto->u.start.fds[1] != proto->u.start.fds[2]) - close(proto->u.start.fds[2]); - - driver_deq(port_num, sizeof(*proto)); + ErtsSysForkerProto *qproto = (ErtsSysForkerProto *)iov[0].iov_base; - if (driver_sizeq(port_num) > 0) + if (forker_deq(port_num, qproto)) driver_select(port_num, forker_fd, ERL_DRV_WRITE|ERL_DRV_USE, 1); } else #endif { - ASSERT(proto->action == ErtsSysForkerProtoAction_SigChld); - - /* ideally this would be a port_command call, but as command is - already used by the spawn_driver, we use control instead. - Note that when using erl_drv_port_control it is an asynchronous - control. */ - erl_drv_port_control(proto->u.sigchld.port_id, 'S', - (char*)proto, sizeof(*proto)); + ASSERT(proto.action == ErtsSysForkerProtoAction_SigChld); + forker_sigchld(proto.u.sigchld.port_id, proto.u.sigchld.error_number); } } @@ -1730,7 +1748,8 @@ static void forker_ready_output(ErlDrvData e, ErlDrvEvent fd) ErlDrvPort port_num = (ErlDrvPort)e; #ifndef FORKER_PROTO_START_ACK - while (driver_sizeq(port_num) > 0) { + int loops = 10; + while (driver_sizeq(port_num) > 0 && --loops) { #endif int vlen; SysIOVec *iov = driver_peekq(port_num, &vlen); @@ -1738,20 +1757,24 @@ static void forker_ready_output(ErlDrvData e, ErlDrvEvent fd) ASSERT(iov[0].iov_len >= (sizeof(*proto))); if (sys_uds_write(forker_fd, (char*)proto, sizeof(*proto), proto->u.start.fds, 3, 0) < 0) { - if (errno == ERRNO_BLOCK) + if (errno == ERRNO_BLOCK || errno == EINTR) { return; - erts_exit(ERTS_DUMP_EXIT, "Failed to write to erl_child_setup: %d\n", errno); + } else if (errno == EMFILE) { + forker_sigchld(proto->u.start.port_id, errno); + if (forker_deq(port_num, proto) == 0) + driver_select(port_num, forker_fd, ERL_DRV_WRITE, 0); + return; + } else { + erts_exit(ERTS_DUMP_EXIT, "Failed to write to erl_child_setup: %d\n", errno); + } } #ifndef FORKER_PROTO_START_ACK - close(proto->u.start.fds[0]); - close(proto->u.start.fds[1]); - if (proto->u.start.fds[1] != proto->u.start.fds[2]) - close(proto->u.start.fds[2]); - driver_deq(port_num, sizeof(*proto)); + if (forker_deq(port_num, proto) == 0) + driver_select(port_num, forker_fd, ERL_DRV_WRITE, 0); } -#endif - +#else driver_select(port_num, forker_fd, ERL_DRV_WRITE, 0); +#endif } static ErlDrvSSizeT forker_control(ErlDrvData e, unsigned int cmd, char *buf, @@ -1762,6 +1785,9 @@ static ErlDrvSSizeT forker_control(ErlDrvData e, unsigned int cmd, char *buf, ErlDrvPort port_num = (ErlDrvPort)e; int res; + if (cmd != ERTS_FORKER_DRV_CONTROL_MAGIC_NUMBER) + return -1; + if (first_call) { /* * Do driver_select here when schedulers and their pollsets have started. @@ -1777,20 +1803,21 @@ static ErlDrvSSizeT forker_control(ErlDrvData e, unsigned int cmd, char *buf, if ((res = sys_uds_write(forker_fd, (char*)proto, sizeof(*proto), proto->u.start.fds, 3, 0)) < 0) { - if (errno == ERRNO_BLOCK) { + if (errno == ERRNO_BLOCK || errno == EINTR) { driver_select(port_num, forker_fd, ERL_DRV_WRITE|ERL_DRV_USE, 1); return 0; + } else if (errno == EMFILE) { + forker_sigchld(proto->u.start.port_id, errno); + forker_deq(port_num, proto); + return 0; + } else { + erts_exit(ERTS_DUMP_EXIT, "Failed to write to erl_child_setup: %d\n", errno); } - erts_exit(ERTS_DUMP_EXIT, "Failed to write to erl_child_setup: %d\n", errno); } #ifndef FORKER_PROTO_START_ACK ASSERT(res == sizeof(*proto)); - close(proto->u.start.fds[0]); - close(proto->u.start.fds[1]); - if (proto->u.start.fds[1] != proto->u.start.fds[2]) - close(proto->u.start.fds[2]); - driver_deq(port_num, sizeof(*proto)); + forker_deq(port_num, proto); #endif return 0; |