diff options
Diffstat (limited to 'erts/emulator/test/port_trace_SUITE.erl')
-rw-r--r-- | erts/emulator/test/port_trace_SUITE.erl | 645 |
1 files changed, 645 insertions, 0 deletions
diff --git a/erts/emulator/test/port_trace_SUITE.erl b/erts/emulator/test/port_trace_SUITE.erl new file mode 100644 index 0000000000..a1986397a8 --- /dev/null +++ b/erts/emulator/test/port_trace_SUITE.erl @@ -0,0 +1,645 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 1999-2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% + + +-module(port_trace_SUITE). + +-export([all/0, suite/0,init_per_suite/1, end_per_suite/1, + init_per_group/2,end_per_group/2, + init_per_testcase/2,end_per_testcase/2]). +-export([port_specs/1, ports/1, open_close/1, + command/1, control/1, connect/1, call/1, + output/1, output2/1, output_binary/1, + outputv/1, set_timer/1, failure_eof/1, + failure_atom/1, failure_posix/1, + failure/1, output_term/1, + driver_output_term/1, + send_term/1, driver_send_term/1, + driver_remote_send_term/1]). + +-define(ECHO_DRV_NOOP, 0). +-define(ECHO_DRV_OUTPUT, 1). +-define(ECHO_DRV_OUTPUT2, 2). +-define(ECHO_DRV_OUTPUT_BINARY, 3). +-define(ECHO_DRV_OUTPUTV, 4). +-define(ECHO_DRV_SET_TIMER, 5). +-define(ECHO_DRV_FAILURE_EOF, 6). +-define(ECHO_DRV_FAILURE_ATOM, 7). +-define(ECHO_DRV_FAILURE_POSIX, 8). +-define(ECHO_DRV_FAILURE, 9). +-define(ECHO_DRV_OUTPUT_TERM, 10). +-define(ECHO_DRV_DRIVER_OUTPUT_TERM, 11). +-define(ECHO_DRV_SEND_TERM, 12). +-define(ECHO_DRV_DRIVER_SEND_TERM, 13). +-define(ECHO_DRV_SAVE_CALLER, 14). +-define(ECHO_DRV_REMOTE_SEND_TERM, 15). + +suite() -> [{ct_hooks,[ts_install_cth]}, + {timetrap, {minutes, 2}}]. + +all() -> + [port_specs, ports, open_close, + command, control, connect, call, + output, output2, output_binary, + outputv, set_timer, failure_eof, + failure_atom, failure_posix, + failure, output_term, + driver_output_term, + send_term, driver_send_term, + driver_remote_send_term]. + +init_per_suite(Config) -> + Config. + +end_per_suite(_Config) -> + ok. + +init_per_group(_GroupName, Config) -> + Config. + +end_per_group(_GroupName, Config) -> + Config. + + +init_per_testcase(Func, Config) when is_atom(Func), is_list(Config) -> + erlang:trace(all, false, [all]), + os:unsetenv("OUTPUTV"), + reload_drv(Config), + Config. + +end_per_testcase(_Func, _Config) -> + erlang:trace(all, false, [all]), + ok. + +%% Test the first argument of trace/3 +port_specs(_Config) -> + + S = self(), + + Tracer = fun F() -> + receive + stop -> + ok; + M -> + S ! M, + F() + end + end, + + Test = fun(TraceSpec, Info1, Info2) -> + {TracerPid,Ref} = spawn_monitor(Tracer), + Prt1 = erlang:open_port({spawn, echo_drv}, [binary]), + erlang:trace(TraceSpec, true, ['receive', {tracer, TracerPid}]), + %% We disable trace messages from the testcase process + erlang:trace(self(), false, ['receive']), + Prt2 = erlang:open_port({spawn, echo_drv}, [binary]), + + InfoCheck = + fun(Info, Prt) -> + if + Info -> + {tracer, TracerPid} = erlang:trace_info(Prt, tracer), + {flags,['receive']} = erlang:trace_info(Prt, flags); + not Info -> + {tracer,[]} = erlang:trace_info(Prt, tracer), + {flags,[]} = erlang:trace_info(Prt, flags) + end + end, + InfoCheck(Info1, Prt1), + InfoCheck(Info2, Prt2), + + %% These may create trace messages + erlang:port_command(Prt1, <<?ECHO_DRV_NOOP>>), + erlang:port_command(Prt2, <<?ECHO_DRV_NOOP>>), + + %% Test what happens when the tracer dies + trace_delivered(), + TracerPid ! stop, + receive {'DOWN', Ref, process, TracerPid, normal} -> ok end, + + %% These should not generate any trace messages + erlang:port_command(Prt1, <<?ECHO_DRV_NOOP>>), + erlang:port_command(Prt2, <<?ECHO_DRV_NOOP>>), + + InfoCheck(false, Prt1), + InfoCheck(false, Prt2), + + erlang:port_close(Prt1), + erlang:port_close(Prt2), + erlang:trace(all, false, [all]), + {Prt1, Prt2} + end, + + {_Prt11, Prt12} = Test(new, false, true), + [{trace, Prt12, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}] + = flush(Prt12), + + {_Prt21, Prt22} = Test(new_ports, false, true), + [{trace, Prt22, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}] + = flush(Prt22), + + {Prt31, _Prt32} = Test(existing, true, false), + [{trace, Prt31, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}] + = flush(Prt31), + + {Prt41, _Prt42} = Test(existing_ports, true, false), + [{trace, Prt41, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}] + = flush(Prt41), + + {Prt51, Prt52} = Test(all, true, true), + [{trace, Prt51, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}] + = flush(Prt51), + [{trace, Prt52, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}] + = flush(Prt52), + + {Prt61, Prt62} = Test(ports, true, true), + [{trace, Prt61, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}] + = flush(Prt61), + [{trace, Prt62, 'receive', {S, {command,<<?ECHO_DRV_NOOP>>}}}] + = flush(Prt62), + + ok. + +%% Test that the 'ports' trace flag works +ports(_Config) -> + + {Prt, S} = trace_and_open([ports],[binary]), + + [{trace, Prt, open, S, echo_drv}, + {trace, Prt, getting_linked, S}] = flush(), + + register(?MODULE, Prt), + unregister(?MODULE), + register(?MODULE, Prt), + + [{trace,Prt,register,port_trace_SUITE}, + {trace,Prt,unregister,port_trace_SUITE}, + {trace,Prt,register,port_trace_SUITE}] = flush(), + + unlink(Prt), + link(Prt), + + [{trace,Prt,getting_unlinked,S}, + {trace,Prt,getting_linked,S}] = flush(), + + erlang:port_close(Prt), + + [{trace,Prt,closed,normal}, + {trace,Prt,unregister,port_trace_SUITE}, + {trace,Prt,unlink,S}] = flush(), + + ok. + +%% Test that port_close and ! close generate correct trace messages +open_close(_Config) -> + + S = trace_ports([send,'receive']), + + Prt = erlang:open_port({spawn, echo_drv}, [binary]), + erlang:port_close(Prt), + [{trace, Prt, 'receive', {S, close}}] = flush(), + + Prt2 = erlang:open_port({spawn, echo_drv}, [binary]), + Prt2 ! {S, close}, + recv({Prt2, closed}), + [{trace, Prt2, 'receive', {S, close}}, + {trace, Prt2, send, closed, S}] = flush(), + + catch erlang:port_close(Prt2), + [] = flush(), + + ok. + +%% Test that port_command and ! command generate correct trace messages +command(Config) -> + + Flags = [send,'receive'], + S = trace_ports(Flags), + Prt = erlang:open_port({spawn, echo_drv}, [binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_NOOP:8>>), + [{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_NOOP:8>>}}}] = flush(), + + erlang:port_command(Prt, [?ECHO_DRV_NOOP, <<0:8>>]), + [{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_NOOP:8,0:8>>}}}] = flush(), + + Prt ! {S, {command, <<?ECHO_DRV_NOOP:8>>}}, + [{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_NOOP:8>>}}}] = flush(), + + OutputMsg = <<?ECHO_DRV_NOOP:8,0:(8*512)>>, + Prt ! {S, {command, OutputMsg}}, + [{trace, Prt, 'receive', {S, {command, OutputMsg}}}] = flush(), + + close(Prt, Flags), + + os:putenv("OUTPUTV","true"), + reload_drv(Config), + + Prt2 = erlang:open_port({spawn, echo_drv}, [binary]), + OutputvMsg = [<<0:8>>,<<0:(8*512)>>,<<0:(8*256)>>,<<0:8>>], + + erlang:port_command(Prt2, OutputvMsg), + [{trace, Prt2, 'receive', {S, {command, OutputvMsg}}}] = flush(), + + Prt2 ! {S, {command, OutputvMsg}}, + [{trace, Prt2, 'receive', {S, {command, OutputvMsg}}}] = flush(), + + close(Prt2, Flags), + + os:unsetenv("OUTPUTV"), + + ok. + +%% Test that port_control generate correct trace messages +control(_Config) -> + + Flags = [send,'receive'], + {Prt, S} = trace_and_open(Flags,[binary]), + + [0] = erlang:port_control(Prt, 1, <<?ECHO_DRV_NOOP:8, 0:8>>), + [{trace, Prt, 'receive', {S, {control, {1, <<?ECHO_DRV_NOOP:8, 0:8>>}}}}, + {trace, Prt, send, {Prt, {control, <<0:8>>}}, S}] = flush(), + + [0] = erlang:port_control(Prt, (1 bsl 32) - 1, <<?ECHO_DRV_NOOP:8, 0:8>>), + [{trace, Prt, 'receive', {S, {control, {(1 bsl 32) - 1, <<?ECHO_DRV_NOOP:8, 0:8>>}}}}, + {trace, Prt, send, {Prt, {control, <<0:8>>}}, S}] = flush(), + + Msg = <<?ECHO_DRV_NOOP:8, 0:(8*512)>>, + Pat = lists:duplicate(512, 0), + Pat = erlang:port_control(Prt, 1, Msg), + [{trace, Prt, 'receive', {S, {control, {1, Msg}}}}, + {trace, Prt, send, {Prt, {control, <<0:(8*512)>>}}, S}] = flush(), + + close(Prt, Flags), + + ok. + +%% Test that port_connect and ! connect generate correct trace messages +%% This includes that the proper getting_linked messages are sent +connect(_Config) -> + + + {Prt, S} = trace_and_open([send, 'receive', ports],[binary]), + + flush(), + + {Pid,Ref} = spawn_monitor( + fun() -> + receive + go -> + Prt ! {self(), {connect, S}}, + receive {Prt, connected} -> unlink(Prt) end + end + end), + erlang:trace(Pid, true, [send, 'receive', procs]), + + erlang:port_connect(Prt, Pid), + unlink(Prt), + + [{trace,Prt,getting_linked,Pid}, + {trace,Prt,'receive',{S,{connect,Pid}}}, + {trace,Prt,send,{Prt,connected},S}, + {trace,Prt,getting_unlinked, S}] = flush(Prt), + + [{trace,Pid,getting_linked,Prt}] = flush(), + + Pid ! go, + recv({'DOWN',Ref,process,Pid,normal}), + + [{trace,Prt,'receive',{Pid,{connect,S}}}, + {trace,Prt,send,{Prt,connected},Pid}, + {trace,Prt,getting_unlinked,Pid}] = flush(Prt), + + [{trace,Pid,'receive',go}, + {trace,Pid,send,{Pid,{connect,S}}, Prt}, + {trace,Pid,'receive',{Prt,connected}}, + {trace,Pid,unlink,Prt}, + {trace,Pid,exit,normal}] = flush(), + + erlang:port_close(Prt), + [{trace, Prt, 'receive', {S, close}}, + {trace, Prt, closed, normal}] = flush(), + ok. + +%% Test that port_call generate correct trace messages +call(_Config) -> + + Flags = [send,'receive'], + {Prt, S} = trace_and_open(Flags,[binary]), + + Test = fun(Msg) -> + BinMsg = term_to_binary(Msg), + + Msg = erlang:port_call(Prt, 0, Msg), + [{trace, Prt, 'receive', {S, {call, {0, BinMsg}}}}, + {trace, Prt, send, {Prt, {call, BinMsg}}, S}] = flush() + end, + + Test({hello, world, make_ref()}), + Test({hello, world, lists:seq(1,1000)}), + + close(Prt, Flags), + + ok. + +%% Test that driver_output generate correct trace messages +output(_Config) -> + + Flags = [send], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_OUTPUT, 123456:32>>), + recv({Prt,{data,<<123456:32>>}}), + + [{trace, Prt, send, {Prt, {data, <<123456:32>>}}, S}] = flush(), + + close(Prt, Flags), + + ok. + +%% Test that driver_output2 generate correct trace messages +output2(_Config) -> + + Flags = [send], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_OUTPUT2, 123456:32>>), + recv({Prt,{data,[$a|<<123456:32>>]}}), + [{trace, Prt, send, {Prt, {data, [$a|<<123456:32>>]}}, S}] = flush(), + + close(Prt, Flags), + + ok. + +%% Test that driver_output_binary generate correct trace messages +output_binary(_Config) -> + + Flags = [send], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_OUTPUT_BINARY, 0, 123456:32>>), + recv({Prt,{data,[$a|<<123456:32>>]}}), + [{trace, Prt, send, {Prt, {data, [$a|<<123456:32>>]}}, S}] = flush(), + + close(Prt, Flags), + + ok. + +%% Test that driver_outputv generate correct trace messages +outputv(_Config) -> + + Flags = [send], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_OUTPUTV, 123456:32>>), + recv({Prt,{data,[$a|<<123456:32>>]}}), + + [{trace, Prt, send, {Prt, {data, [$a|<<123456:32>>]}}, S}] = flush(), + + erlang:port_close(Prt), + [] = flush(), + + ok. + +%% Test that driver_set_timer generate correct trace messages +set_timer(_Config) -> + + Flags = [send,'receive'], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_SET_TIMER>>), + timer:sleep(100), + [{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_SET_TIMER>>}}}, + {trace, Prt, 'receive', timeout}] = flush(), + + close(Prt, Flags), + + ok. + +%% Test that driver_failure* generate correct trace messages +failure_eof(_Config) -> + + Flags = [send,'receive', ports], + S = trace_ports(Flags), + + Prt = erlang:open_port({spawn, echo_drv}, [eof, binary]), + [{trace, Prt, open, S, echo_drv}, + {trace, Prt, getting_linked, S}] = flush(), + + erlang:port_command(Prt, <<?ECHO_DRV_FAILURE_EOF>>), + recv({Prt,eof}), + [{trace, Prt, 'receive', {S, {command, <<?ECHO_DRV_FAILURE_EOF>>}}}, + {trace, Prt, send, {Prt, eof}, S}] = flush(), + + close(Prt, Flags), + + %% Run same test without eof option + failure_test(<<?ECHO_DRV_FAILURE_EOF>>, normal). + +failure_atom(_Config) -> + failure_test(<<?ECHO_DRV_FAILURE_ATOM, "failure\0">>, failure). +failure_posix(_Config) -> + failure_test(<<?ECHO_DRV_FAILURE_POSIX>>, eagain). +failure(_Config) -> + failure_test(<<?ECHO_DRV_FAILURE, 1>>, 1). + +failure_test(Failure, Reason) -> + + {Prt, S} = trace_and_open([send, 'receive', ports],[binary]), + + [{trace, Prt, open, S, echo_drv}, + {trace, Prt, getting_linked, S}] = flush(), + + process_flag(trap_exit, true), + erlang:port_command(Prt, Failure), + try + recv({'EXIT',Prt,Reason}) + after + process_flag(trap_exit, false) + end, + [{trace, Prt, 'receive', {S, {command, Failure}}}, + {trace, Prt, closed, Reason}, + {trace, Prt, unlink, S}] = flush(), + + ok. + +%% Test that erl_drv_output_term generate correct trace messages +output_term(_Config) -> + + Flags = [send], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_OUTPUT_TERM, 123456:32>>), + recv({echo, Prt, <<123456:32>>}), + [{trace, Prt, send, {echo, Prt, <<123456:32>>}, S}] = flush(), + + close(Prt, Flags), + + ok. + +%% Test that driver_output_term generate correct trace messages +driver_output_term(_Config) -> + + Flags = [send], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_DRIVER_OUTPUT_TERM, 123456:32>>), + recv({echo, Prt, <<123456:32>>}), + [{trace, Prt, send, {echo, Prt, <<123456:32>>}, S}] = flush(), + + close(Prt, Flags), + + ok. + +%% Test that erl_drv_send_term generate correct trace messages +send_term(_Config) -> + + Flags = [send], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_SEND_TERM, 123456:32>>), + recv({echo, Prt, <<123456:32>>}), + [{trace, Prt, send, {echo, Prt, <<123456:32>>}, S}] = flush(), + + {Pid, Ref} = spawn_monitor(fun() -> erlang:port_command(Prt, <<?ECHO_DRV_SAVE_CALLER>>) end), + recv({'DOWN',Ref,process,Pid,normal}), + erlang:port_command(Prt, <<?ECHO_DRV_SEND_TERM, 123456:32>>), + [{trace, Prt, send_to_non_existing_process, {echo, Prt, <<123456:32>>}, Pid}] = flush(), + + close(Prt, Flags), + + ok. + +%% Test that driver_send_term generate correct trace messages +driver_send_term(_Config) -> + + Flags = [send], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_DRIVER_SEND_TERM, 123456:32>>), + recv({echo, Prt, <<123456:32>>}), + [{trace, Prt, send, {echo, Prt, <<123456:32>>}, S}] = flush(), + + {Pid, Ref} = spawn_monitor(fun() -> erlang:port_command(Prt, <<?ECHO_DRV_SAVE_CALLER>>) end), + recv({'DOWN',Ref,process,Pid,normal}), + erlang:port_command(Prt, <<?ECHO_DRV_SEND_TERM, 123456:32>>), + [{trace, Prt, send_to_non_existing_process, {echo, Prt, <<123456:32>>}, Pid}] = flush(), + + close(Prt, Flags), + + ok. + +%% Test that driver_send_term from non-scheduler thread does not +%% generate trace messages. +driver_remote_send_term(_Config) -> + + Flags = [send], + {Prt, S} = trace_and_open(Flags,[binary]), + + erlang:port_command(Prt, <<?ECHO_DRV_REMOTE_SEND_TERM, 123456:32>>), + recv({echo, Prt, <<123456:32>>}), + [] = flush(), + + Pid = spawn_link( + fun() -> + erlang:port_command(Prt, <<?ECHO_DRV_SAVE_CALLER>>), + S ! ok, + receive M -> S ! M end + end), + recv(ok), + erlang:trace(Pid, true, ['receive']), + + erlang:port_command(Prt, <<?ECHO_DRV_REMOTE_SEND_TERM, 123456:32>>), + recv({echo, Prt, <<123456:32>>}), + [{trace, Pid, 'receive', {echo, Prt, <<123456:32>>}}] = flush(), + + close(Prt, Flags), + + ok. + +%%%%%%%%%%%%%%%%%%% +%% Helper functions +%%%%%%%%%%%%%%%%%%% + +trace_ports(TraceFlags) -> + erlang:trace(new_ports, true, TraceFlags), + self(). + +trace_and_open(TraceFlags, OpenFlags) -> + S = self(), + Ports = proplists:get_value(ports, TraceFlags), + [trace_ports(TraceFlags) || Ports], + Prt = erlang:open_port({spawn, echo_drv}, OpenFlags), + [erlang:trace(Prt, true, TraceFlags) || Ports == undefined], + {Prt, S}. + +close(Prt, Flags) -> + Recv = proplists:get_value('receive', Flags), + Ports = proplists:get_value(ports, Flags), + S = self(), + + erlang:port_close(Prt), + + if Recv, Ports -> + [{trace, Prt, 'receive', {S, close}}, + {trace, Prt, closed, normal}, + {trace, Prt, unlink, S}] = flush(); + Recv -> + [{trace, Prt, 'receive', {S, close}}] = flush(); + Ports -> + [{trace, Prt, closed, normal}, + {trace, Prt, unlink, S}] = flush(); + true -> + [] = flush() + end. + +trace_delivered() -> + Ref = erlang:trace_delivered(all), + receive {trace_delivered, all, Ref} -> ok end. + +flush() -> + flush(all). +flush(From) -> + trace_delivered(), + f(From). + +f(From) -> + receive + M when From =:= all; element(2, M) == From -> + [M | f(From)] + after 0 -> + [] + end. + +recv(Msg) -> + receive Msg -> ok after 1000 -> ct:fail({did_not_get_data,Msg,flush()}) end. + +load_drv(Config) -> + Path = proplists:get_value(data_dir, Config), + case erl_ddll:load_driver(Path, echo_drv) of + ok -> ok; + {error, Error} = Res -> + io:format("~s\n", [erl_ddll:format_error(Error)]), + ct:fail(Res) + end. + +reload_drv(Config) -> + erl_ddll:unload_driver(echo_drv), + load_drv(Config). |