aboutsummaryrefslogtreecommitdiffstats
path: root/erts/emulator
diff options
context:
space:
mode:
Diffstat (limited to 'erts/emulator')
-rw-r--r--erts/emulator/internal_doc/CodeLoading.md186
-rw-r--r--erts/emulator/internal_doc/Tracing.md220
2 files changed, 406 insertions, 0 deletions
diff --git a/erts/emulator/internal_doc/CodeLoading.md b/erts/emulator/internal_doc/CodeLoading.md
new file mode 100644
index 0000000000..151b9cd57c
--- /dev/null
+++ b/erts/emulator/internal_doc/CodeLoading.md
@@ -0,0 +1,186 @@
+Non-Blocking Code Loading
+=========================
+
+Introduction
+------------
+
+Before OTP R16 when an Erlang code module was loaded, all other
+execution in the VM were halted while the load operation was carried
+out in single threaded mode. This might not be a big problem for
+initial loading of modules during VM boot, but it can be a severe
+problem for availability when upgrading modules or adding new code on
+a VM with running payload. This problem grows with the number of cores
+as both the time it takes to wait for all schedulers to stop increases
+as well as the potential amount of halted ongoing work.
+
+In OTP R16, modules are loaded without blocking the VM.
+Erlang processes may continue executing undisturbed in parallel during
+the entire load operation. The code loading is carried out by a normal
+Erlang process that is scheduled like all the others. The load
+operation is completed by making the loaded code visible to all
+processes in a consistent way with one single atomic
+instruction. Non-blocking code loading will improve real-time
+characteristics when modules are loaded/upgraded on a running SMP
+system.
+
+
+The Load Phases
+---------------
+
+The loading of a module is divided into two phases; a *prepare phase*
+and a *finishing phase*. The prepare phase contains reading the BEAM
+file format and all the preparations of the loaded code that can
+easily be done without interference with the running code. The
+finishing phase will make the loaded (and prepared) code accessible
+from the running code. Old module versions (replaced or deleted) will
+also be made inaccessible by the finishing phase.
+
+The prepare phase is designed to allow several "loader" processes to
+prepare separate modules in parallel while the finishing phase can
+only be done by one loader process at a time. A second loader process
+trying to enter finishing phase will be suspended until the first
+loader is done. This will only block the process, the scheduler is
+free to schedule other work while the second loader is waiting. (See
+`erts_try_seize_code_write_permission` and
+`erts_release_code_write_permission`).
+
+The ability to prepare several modules in parallel is not currently
+used as almost all code loading is serialized by the code_server
+process. The BIF interface is however prepared for this.
+
+ erlang:prepare_loading(Module, Code) -> LoaderState
+ erlang:finish_loading([LoaderState])
+
+The idea is that `prepare_loading` could be called in parallel for
+different modules and returns a "magic binary" containing the internal
+state of each prepared module. Function `finish_loading` could take a
+list of such states and do the finishing of all of them in one go.
+
+Currenlty we use the legacy BIF `erlang:load_module` which is now
+implemented in Erlang by calling the above two functions in
+sequence. Function `finish_loading` is limited to only accepts a list
+with one module state as we do not yet use the multi module loading
+feature.
+
+
+The Finishing Sequence
+----------------------
+
+During VM execution, code is accessed through a number of data
+structures. These *code access structures* are
+
+* Export table. One entry for every exported function.
+* Module table. One entry for each loaded module.
+* "beam_catches". Identifies jump destinations for catch instructions.
+* "beam_ranges". Map code address to function and line in source file.
+
+The most frequently used of these structures is the export table that
+is accessed in run time for every executed external function call to
+get the address of the callee. For performance reasons, we want to
+access all these structures without any overhead from thread
+synchronization. Earlier this was solved with an emergency break. Stop
+the entire VM to mutate these code access structures, otherwise treat
+them as read-only.
+
+The solution in R16 is instead to *replicate* the code access
+structures. We have one set of active structures read by the running
+code. When new code is loaded the active structures are copied, the
+copy is updated to include the newly loaded module and then a switch
+is made to make the updated copy the new active set. The active set is
+identified by a single global atomic variable
+`the_active_code_index`. The switch can thus be made by a single
+atomic write operation. The running code have to read this atomic
+variable when using the active access structures, which means one
+atomic read operation per external function call for example. The
+performance penalty from this extra atomic read is however very small
+as it can be done without any memory barriers at all (as described
+below). With this solution we also preserve the transactional feature
+of a load operation. Running code will never see the intermediate
+result of a half loaded module.
+
+The finishing phase is carried out in the following sequence by the
+BIF `erlang:finish_loading`:
+
+1. Seize exclusive code write permission (suspend process if needed
+ until we get it).
+
+2. Make a full copy of all the active access structures. This copy is
+ called the staging area and is identified by the global atomic
+ variable `the_staging_code_index`.
+
+3. Update all access structures in the staging area to include the
+ newly prepared module.
+
+4. Schedule a thread progress event. That is a time in the future when
+ all schedulers have yielded and executed a full memory barrier.
+
+5. Suspend the loader process.
+
+6. After thread progress, commit the staging area by assigning
+ `the_staging_code_index` to `the_active_code_index`.
+
+7. Release the code write permission allowing other processes to stage
+ new code.
+
+8. Resume the loader process allowing it to return from
+ `erlang:finish_loading`.
+
+
+### Thread Progress
+
+The waiting for thread progress in 4-6 is necessary in order for
+processes to read `the_active_code_index` atomic during normal
+execution without any expensive memory barriers. When we write a new
+value into `the_active_code_index` in step 6, we know that all
+schedulers will see an updated and consistent view of all the new
+active access structures once they become reachable through
+`the_active_code_index`.
+
+The total lack of memory barrier when reading `the_active_code_index`
+has one interesting consequence however. Different processes may see
+the new code at different point in time depending on when different
+cores happen to refresh their hardware caches. This may sound unsafe
+but it actually does not matter. The only property we must guarantee
+is that the ability to see the new code must spread with process
+communication. After receiving a message that was triggered by new
+code, the receiver must be guaranteed to also see the new code. This
+will be guaranteed as all types of process communication involves
+memory barriers in order for the receiver to be sure to read what the
+sender has written. This implicit memory barrier will then also make
+sure that the receiver reads the new value of `the_active_code_index`
+and thereby also sees the new code. This is true for all kinds of
+inter process communication (TCP, ETS, process name registering,
+tracing, drivers, NIFs, etc) not just Erlang messages.
+
+### Code Index Reuse
+
+To optimize the copy operation in step 2, code access structures are
+reused. In current solution we have three sets of code access
+structures, identified by a code index of 0, 1 and 2. These indexes
+are used in a round robin fashion. Instead of having to initialize a
+completely new copy of all access structures for every load operation
+we just have to update with the changes that have happened since the
+last two code load operations. We could get by with only two code
+indexes (0 and 1), but that would require yet another round of waiting
+for thread progress before step 2 in the `finish_loading` sequence. We
+cannot start reusing a code index as staging area until we know that
+no lingering scheduler thread is still using it as the active code
+index. With three generations of code indexes, the waiting for thread
+progress in step 4-6 will give this guarantee for us. Thread progress
+will wait for all running schedulers to reschedule at least one
+time. No ongoing execution reading code access structures reached from
+an old value of `the_active_code_index` can exist after a second round
+of thread progress.
+
+The design choice between two or three generations of code access
+structures is a trade-off between memory consumption and code loading
+latency.
+
+### A Consistent Code View
+
+Some native BIFs may need to get a consistent snapshot view of the
+active code. To do this it is important to only read
+`the_active_code_index` one time and then use that index value for all
+code accessing during the BIF. If a load operation is executed in
+parallel, reading `the_active_code_index` a second time might result
+in a different value, and thereby a different view of the code.
diff --git a/erts/emulator/internal_doc/Tracing.md b/erts/emulator/internal_doc/Tracing.md
new file mode 100644
index 0000000000..30bc5327a7
--- /dev/null
+++ b/erts/emulator/internal_doc/Tracing.md
@@ -0,0 +1,220 @@
+Non-blocking trace setting
+==========================
+
+Introduction
+------------
+
+Before OTP R16 when trace settings were changed by `erlang:trace_pattern`,
+all other execution in the VM were halted while the trace operation
+was carried out in single threaded mode. Similar to code loading, this
+can impose a severe problem for availability that grows with the
+number of cores.
+
+In OTP R16, trace breakpoints are set in the code without blocking the
+VM. Erlang processes may continue executing undisturbed in parallel
+during the entire operation. The same base technique is used as for
+code loading. A staging area of breakpoints is prepared and then made
+active with a single atomic operation.
+
+
+Redesign of Breakpoint Wheel
+----------------------------
+
+To make it easier to manage breakpoints without single threaded mode a
+redesign of the breakpoint mechanism has been made. The old
+"breakpoint wheel" data structure was a circular double-linked list of
+breakpoints for each instrumented function. It was invented before the
+SMP emulator. To support it in the SMP emulator, is was essentially
+expanded to one breakpoint wheel per scheduler. As more breakpoint
+types have been added, the implementation have become messy and hard
+to understand and maintain.
+
+In the new design the old wheel was dropped and instead replaced by
+one struct (`GenericBp`) to hold the data for all types of breakpoints
+for each instrumented function. A bit-flag field is used to indicate
+what different type of break actions that are enabled.
+
+
+Same Same but Different
+-----------------------
+Even though `trace_pattern` use the same technique as the non-blocking
+code loading with replicated generations of data structures and an
+atomic switch, the implementations are quite separate from each
+other. One initial idea was to use the existing mechanism of code
+loading to do a dummy load operation that would make a copy of the
+affected modules. That copy could then be instrumented with
+breakpoints before making it reachable with the same atomic switch as
+done for code loading. This approach seems straight forward but has a
+number of shortcomings, one being the large memory footprint when many
+modules are instrumented. Another problem is how execution will reach
+the new instrumented code. Normally loaded code can only be reached
+through external functions calls. Trace settings must be activated
+instantaneously without the need of external function calls.
+
+The choosen solution is instead for tracing to use the technique of
+replication applied on the data structures for breakpoints. Two
+generations of breakpoints are kept and indentified by index of 0 and
+1. The global atomic variables `erts_active_bp_index` will determine
+which generation of breakpoints running code will use.
+
+### Atomicy Without Atomic Operations
+
+Not using the code loading generations (or any other code duplication)
+means that `trace_pattern` must at some point write to the active beam
+code in order for running processes to reach the staged breakpoints
+structures. This can be done with one single atomic write operation
+per instrumented function. The beam instruction words are however read
+with normal memory loads and not through the atomic API. The only
+guarantee we need is that the written instruction word is seen as
+atomic. Either fully written or not at all. This is true for word
+aligned write operation on all hardware architectures we use.
+
+
+Adding a new Breakpoint
+-----------------------
+This is a simplified sequence describing what `trace_pattern` goes
+through when adding a new breakpoint.
+
+1. Seize exclusive code write permission (suspend process until we get it).
+
+2. Allocate breakpoint structure `GenericBp` including both generations.
+ Set the active part as disabled with a zeroed flagfield. Save the original
+ instruction word in the breakpoint.
+
+3. Write a pointer to the breakpoint at offset -4 from the first
+ instruction "func_info" header.
+
+4. Set the staging part of the breakpoint as enabled with specified
+ breakpoint data.
+
+5. Wait for thread progress.
+
+6. Write a `op_i_generic_breakpoint` as the first instruction for the function.
+ This instruction will execute the breakpoint that it finds at offset -4.
+
+7. Wait for thread progress.
+
+8. Commit the breadpoint by switching `erts_active_bp_index`.
+
+9. Wait for thread progress.
+
+10. Prepare for next call to `trace_pattern` by updating the new staging part
+ (the old active) of the breakpoint to be identic to the the new active part.
+
+11. Release code write permission and return from `trace_pattern`.
+
+
+The code write permission "lock" seized in step 1 is the same as used
+by code loading. This will ensure that only one process at a time can
+stage new trace settings but it will also prevent concurrent code
+loading and make sure we see a consistent view of the beam code during
+the entire sequence.
+
+Between step 6 and 8, runninng processes might execute the written
+`op_i_generic_breakpoint` instruction. They will get the breakpoint
+structure written in step 3, read `erts_active_bp_index` and execute
+the corresponding part of the breakpoint. Before the switch in step 8
+becomes visible they will however execute the disabled part of the
+breakpoint structure and do nothing other than executing the saved
+original instruction.
+
+
+To Updating and Remove Breakpoints
+----------------------------------
+
+The above sequence did only describe adding a new breakpoint. We do
+basically the same sequence to update the settings of an existing
+breakpoint except step 2,3 and 6 can be skipped as it has already been
+done.
+
+To remove a breakpoint some more steps are needed. The idea is to
+first stage the breakpoint as disabled, do the switch, wait for thread
+progress and then remove the disabled breakpoint by restoring the
+original beam instruction.
+
+Here is a more complete sequence that contains both adding, updating
+and removing breakpoints.
+
+1. Seize exclusive code write permission (suspend process until we get it).
+
+2. Allocate new breakpoint structures with a disabled active part and
+ the original beam instruction. Write a pointer to the breakpoint in
+ "func_info" header at offset -4.
+
+3. Update the staging part of all affected breakpoints. Disable
+ breakpoints that are to be removed.
+
+4. Wait for thread progress.
+
+5. Write a `op_i_generic_breakpoint` as the first instruction for all
+ functions with new breakpoints.
+
+6. Wait for thread progress.
+
+7. Commit all staged breadpoints by switching `erts_active_bp_index`.
+
+8. Wait for thread progress.
+
+
+9. Restore original beam instruction for disabled breakpoints.
+
+10. Wait for thread progress.
+
+11. Prepare for next call to `trace_pattern` by updating the new
+ staging area (the old active) for all enabled breakpoints.
+
+12. Deallocate disabled breakpoint structures.
+
+13. Release code write permission and return from `trace_pattern`.
+
+
+### All that Waiting for Thread Progress
+
+There are four rounds of waiting for thread progress in the above
+sequence. In the code loading sequence we sacrificed memory overhead
+of three generations to avoid a second round of thread progress. The
+latency of `trace_pattern` should not be such a big problem for
+however, as it is normally not called in a rapid sequence.
+
+The waiting in step 4 is to make sure all threads will see an updated
+view of the breakpoint structures once they become reachable through
+the `op_i_generic_breakpoint` instruction written in step 5.
+
+The waiting in step 6 is to make the activation of the new trace
+settings "as atomic as possible". Different cores might see the new
+value of `erts_active_bp_index` at different times as it is read
+without any memory barrier. But this is the best we can do without
+more expensive thread synchronization.
+
+The waiting in step 8 is to make sure we dont't restore the original
+bream instructions for disabled breakpoints until we know that no
+thread is still accessing the old enabled part of a disabled
+breakpoint.
+
+The waiting in step 10 is to make sure no lingering thread is still
+accessing disabled breakpoint structures to be deallocated in step
+12.
+
+
+Global Tracing
+--------------
+
+Call tracing with `global` option only affects external function
+calls. This was earlier handled by inserting a special trace
+instruction in export entries without the use of breakpoints. With the
+new non-blocking tracing we want to avoid special handling for global
+tracing and make use of the staging and atomic switching within the
+breakpoint mechanism. The solution was to create the same type of
+breakpoint structure for a global call trace. The difference to local
+tracing is that we insert the `op_i_generic_breakpoint` instruction
+(with its pointer at offset -4) in the export entry rather than in the
+code.
+
+
+Future work
+-----------
+
+We still go to single threaded mode when new code is loaded for a
+module that is traced, or when loading code when there is a default
+trace pattern set. That is not impossible to fix, but that requires
+much closer cooperation between tracing BIFs and the loader BIFs.