diff options
Diffstat (limited to 'erts/etc/unix/to_erl.c')
| -rw-r--r-- | erts/etc/unix/to_erl.c | 589 |
1 files changed, 3 insertions, 586 deletions
diff --git a/erts/etc/unix/to_erl.c b/erts/etc/unix/to_erl.c index b9e397cbf2..38a94ed9c3 100644 --- a/erts/etc/unix/to_erl.c +++ b/erts/etc/unix/to_erl.c @@ -16,592 +16,9 @@ * * %CopyrightEnd% */ -/* - * Module: to_erl.c - * - * This module implements a process that opens two specified FIFOs, one - * for reading and one for writing; reads from its stdin, and writes what - * it has read to the write FIF0; reads from the read FIFO, and writes to - * its stdout. - * - ________ _________ - | |--<-- pipe.r (fifo1) --<--| | - | to_erl | | run_erl | (parent) - |________|-->-- pipe.w (fifo2) -->--|_________| - ^ master pty - | - | slave pty - ____V____ - | | - | "erl" | (child) - |_________| - */ -#ifdef HAVE_CONFIG_H -# include "config.h" -#endif - -#include <sys/types.h> -#include <sys/stat.h> -#include <sys/time.h> -#include <sys/types.h> -#include <fcntl.h> -#include <unistd.h> -#include <stdio.h> -#include <stdlib.h> -#include <string.h> -#include <termios.h> -#include <dirent.h> -#include <signal.h> -#include <errno.h> -#ifdef HAVE_SYS_IOCTL_H -# include <sys/ioctl.h> -#endif - -#include "run_erl.h" -#include "safe_string.h" /* strn_cpy, strn_catf, sn_printf, etc. */ - -#if defined(O_NONBLOCK) -# define DONT_BLOCK_PLEASE O_NONBLOCK -#else -# define DONT_BLOCK_PLEASE O_NDELAY -# if !defined(EAGAIN) -# define EAGAIN -3898734 -# endif -#endif - -#ifdef HAVE_STRERROR -# define STRERROR(x) strerror(x) -#else -# define STRERROR(x) "" -#endif - -#define noDEBUG - -#define PIPE_DIR "/tmp/" -#define PIPE_STUBNAME "erlang.pipe" -#define PIPE_STUBLEN strlen(PIPE_STUBNAME) - -#ifdef DEBUG -#define STATUS(s) { fprintf(stderr, (s)); fflush(stderr); } -#else -#define STATUS(s) -#endif - -#ifndef FILENAME_MAX -#define FILENAME_MAX 250 -#endif - -static struct termios tty_smode, tty_rmode; -static int tty_eof = 0; -static int recv_sig = 0; -static int protocol_ver = RUN_ERL_LO_VER; /* assume lowest to begin with */ - -static int write_all(int fd, const char* buf, int len); -static int window_size_seq(char* buf, size_t bufsz); -static int version_handshake(char* buf, int len, int wfd); -#ifdef DEBUG -static void show_terminal_settings(struct termios *); -#endif - -static void handle_ctrlc(int sig) -{ - /* Reinstall the handler, and signal break flag */ - signal(SIGINT,handle_ctrlc); - recv_sig = SIGINT; -} - -static void handle_sigwinch(int sig) -{ - recv_sig = SIGWINCH; -} - -static void usage(char *pname) -{ - fprintf(stderr, "Usage: %s [-h|-F] [pipe_name|pipe_dir/]\n", pname); - fprintf(stderr, "\t-h\tThis help text.\n"); - fprintf(stderr, "\t-F\tForce connection even though pipe is locked by other to_erl process.\n"); -} - -int main(int argc, char **argv) -{ - char FIFO1[FILENAME_MAX], FIFO2[FILENAME_MAX]; - int i, len, wfd, rfd; - fd_set readfds; - char buf[BUFSIZ]; - char pipename[FILENAME_MAX]; - int pipeIx = 1; - int force_lock = 0; - int got_some = 0; - - if (argc >= 2 && argv[1][0]=='-') { - switch (argv[1][1]) { - case 'h': - usage(argv[0]); - exit(1); - case 'F': - force_lock = 1; - break; - default: - fprintf(stderr,"Invalid option '%s'\n",argv[1]); - exit(1); - } - pipeIx = 2; - } - -#ifdef DEBUG - fprintf(stderr, "%s: pid is : %d\n", argv[0], (int)getpid()); -#endif - - strn_cpy(pipename, sizeof(pipename), - (argv[pipeIx] ? argv[pipeIx] : PIPE_DIR)); - - if(*pipename && pipename[strlen(pipename)-1] == '/') { - /* The user wishes us to find a pipe name in the specified */ - /* directory */ - int highest_pipe_num = 0; - DIR *dirp; - struct dirent *direntp; - - dirp = opendir(pipename); - if(!dirp) { - fprintf(stderr, "Can't access pipe directory %s: %s\n", pipename, strerror(errno)); - exit(1); - } - - /* Check the directory for existing pipes */ - - while((direntp=readdir(dirp)) != NULL) { - if(strncmp(direntp->d_name,PIPE_STUBNAME,PIPE_STUBLEN)==0) { - int num = atoi(direntp->d_name+PIPE_STUBLEN+1); - if(num > highest_pipe_num) - highest_pipe_num = num; - } - } - closedir(dirp); - strn_catf(pipename, sizeof(pipename), (highest_pipe_num?"%s.%d":"%s"), - PIPE_STUBNAME, highest_pipe_num); - } /* if */ - - /* read FIFO */ - sn_printf(FIFO1,sizeof(FIFO1),"%s.r",pipename); - /* write FIFO */ - sn_printf(FIFO2,sizeof(FIFO2),"%s.w",pipename); - - /* Check that nobody is running to_erl on this pipe already */ - if ((wfd = open (FIFO1, O_WRONLY|DONT_BLOCK_PLEASE, 0)) >= 0) { - /* Open as server succeeded -- to_erl is already running! */ - close(wfd); - fprintf(stderr, "Another to_erl process already attached to pipe " - "%s.\n", pipename); - if (force_lock) { - fprintf(stderr, "But we proceed anyway by force (-F).\n"); - } - else { - exit(1); - } - } - - if ((rfd = open (FIFO1, O_RDONLY|DONT_BLOCK_PLEASE, 0)) < 0) { -#ifdef DEBUG - fprintf(stderr, "Could not open FIFO %s for reading.\n", FIFO1); -#endif - fprintf(stderr, "No running Erlang on pipe %s: %s\n", pipename, strerror(errno)); - exit(1); - } -#ifdef DEBUG - fprintf(stderr, "to_erl: %s opened for reading\n", FIFO1); -#endif - - if ((wfd = open (FIFO2, O_WRONLY|DONT_BLOCK_PLEASE, 0)) < 0) { -#ifdef DEBUG - fprintf(stderr, "Could not open FIFO %s for writing.\n", FIFO2); -#endif - fprintf(stderr, "No running Erlang on pipe %s: %s\n", pipename, strerror(errno)); - close(rfd); - exit(1); - } -#ifdef DEBUG - fprintf(stderr, "to_erl: %s opened for writing\n", FIFO2); -#endif - - fprintf(stderr, "Attaching to %s (^D to exit)\n\n", pipename); - - /* Set break handler to our handler */ - signal(SIGINT,handle_ctrlc); - - /* - * Save the current state of the terminal, and set raw mode. - */ - if (tcgetattr(0, &tty_rmode) , 0) { - fprintf(stderr, "Cannot get terminals current mode\n"); - exit(-1); - } - tty_smode = tty_rmode; - tty_eof = '\004'; /* Ctrl+D to exit */ -#ifdef DEBUG - show_terminal_settings(&tty_rmode); -#endif - tty_smode.c_iflag = - 1*BRKINT |/*Signal interrupt on break.*/ - 1*IGNPAR |/*Ignore characters with parity errors.*/ - 1*ISTRIP |/*Strip character.*/ - 0; - -#if 0 -0*IGNBRK |/*Ignore break condition.*/ -0*PARMRK |/*Mark parity errors.*/ -0*INPCK |/*Enable input parity check.*/ -0*INLCR |/*Map NL to CR on input.*/ -0*IGNCR |/*Ignore CR.*/ -0*ICRNL |/*Map CR to NL on input.*/ -0*IUCLC |/*Map upper-case to lower-case on input.*/ -0*IXON |/*Enable start/stop output control.*/ -0*IXANY |/*Enable any character to restart output.*/ -0*IXOFF |/*Enable start/stop input control.*/ -0*IMAXBEL|/*Echo BEL on input line too long.*/ -#endif - - tty_smode.c_oflag = - 1*OPOST |/*Post-process output.*/ - 1*ONLCR |/*Map NL to CR-NL on output.*/ -#ifdef XTABS - 1*XTABS |/*Expand tabs to spaces. (Linux)*/ -#endif -#ifdef OXTABS - 1*OXTABS |/*Expand tabs to spaces. (FreeBSD)*/ -#endif -#ifdef NL0 - 1*NL0 |/*Select newline delays*/ -#endif -#ifdef CR0 - 1*CR0 |/*Select carriage-return delays*/ -#endif -#ifdef TAB0 - 1*TAB0 |/*Select horizontal tab delays*/ -#endif -#ifdef BS0 - 1*BS0 |/*Select backspace delays*/ -#endif -#ifdef VT0 - 1*VT0 |/*Select vertical tab delays*/ -#endif -#ifdef FF0 - 1*FF0 |/*Select form feed delays*/ -#endif - 0; - -#if 0 -0*OLCUC |/*Map lower case to upper on output.*/ -0*OCRNL |/*Map CR to NL on output.*/ -0*ONOCR |/*No CR output at column 0.*/ -0*ONLRET |/*NL performs CR function.*/ -0*OFILL |/*Use fill characters for delay.*/ -0*OFDEL |/*Fill is DEL, else NULL.*/ -0*NL1 | -0*CR1 | -0*CR2 | -0*CR3 | -0*TAB1 | -0*TAB2 | -0*TAB3 |/*Expand tabs to spaces.*/ -0*BS1 | -0*VT1 | -0*FF1 | -#endif - - /* JALI: removed setting the tty_smode.c_cflag flags, since this is not */ - /* advisable if this is a *real* terminal, such as the console. In fact */ - /* this may hang the entire machine, deep, deep down (signalling break */ - /* or toggling the abort switch doesn't help) */ - - tty_smode.c_lflag = - 0; - -#if 0 -0*ISIG |/*Enable signals.*/ -0*ICANON |/*Canonical input (erase and kill processing).*/ -0*XCASE |/*Canonical upper/lower presentation.*/ -0*ECHO |/*Enable echo.*/ -0*ECHOE |/*Echo erase character as BS-SP-BS.*/ -0*ECHOK |/*Echo NL after kill character.*/ -0*ECHONL |/*Echo NL.*/ -0*NOFLSH |/*Disable flush after interrupt or quit.*/ -0*TOSTOP |/*Send SIGTTOU for background output.*/ -0*ECHOCTL|/*Echo control characters as ^char, delete as ^?.*/ -0*ECHOPRT|/*Echo erase character as character erased.*/ -0*ECHOKE |/*BS-SP-BS erase entire line on line kill.*/ -0*FLUSHO |/*Output is being flushed.*/ -0*PENDIN |/*Retype pending input at next read or input character.*/ -0*IEXTEN |/*Enable extended (implementation-defined) functions.*/ -#endif - - tty_smode.c_cc[VMIN] =0;/* Note that VMIN is the same as VEOF! */ - tty_smode.c_cc[VTIME] =0;/* Note that VTIME is the same as VEOL! */ - tty_smode.c_cc[VINTR] =3; - - tcsetattr(0, TCSADRAIN, &tty_smode); - -#ifdef DEBUG - show_terminal_settings(&tty_smode); -#endif - /* - * "Write a ^R to the FIFO which causes the other end to redisplay - * the input line." - * This does not seem to work as was intended in old comment above. - * However, this control character is now (R12B-3) used by run_erl - * to trigger the version handshaking between to_erl and run_erl - * at the start of every new to_erl-session. - */ - - if (write(wfd, "\014", 1) < 0) { - fprintf(stderr, "Error in writing ^R to FIFO.\n"); - } - - /* - * read and write - */ - while (1) { - FD_ZERO(&readfds); - FD_SET(0, &readfds); - FD_SET(rfd, &readfds); - if (select(rfd + 1, &readfds, NULL, NULL, NULL) < 0) { - if (recv_sig) { - FD_ZERO(&readfds); - } - else { - fprintf(stderr, "Error in select.\n"); - break; - } - } - len = 0; - - /* - * Read from terminal and write to FIFO - */ - if (recv_sig) { - switch (recv_sig) { - case SIGINT: - fprintf(stderr, "[Break]\n\r"); - buf[0] = '\003'; - len = 1; - break; - case SIGWINCH: - len = window_size_seq(buf,sizeof(buf)); - break; - default: - fprintf(stderr,"Unexpected signal: %u\n",recv_sig); - } - recv_sig = 0; - } - else if (FD_ISSET(0, &readfds)) { - len = read(0, buf, sizeof(buf)); - if (len <= 0) { - close(rfd); - close(wfd); - if (len < 0) { - fprintf(stderr, "Error in reading from stdin.\n"); - } else { - fprintf(stderr, "[EOF]\n\r"); - } - break; - } - /* check if there is an eof character in input */ - for (i = 0; i < len && buf[i] != tty_eof; i++); - if (buf[i] == tty_eof) { - fprintf(stderr, "[Quit]\n\r"); - break; - } - } - - if (len) { -#ifdef DEBUG - if(write(1, buf, len)); -#endif - if (write_all(wfd, buf, len) != len) { - fprintf(stderr, "Error in writing to FIFO.\n"); - close(rfd); - close(wfd); - break; - } - STATUS("\" OK\r\n"); - } - - /* - * Read from FIFO, write to terminal. - */ - if (FD_ISSET(rfd, &readfds)) { - STATUS("FIFO read: "); - len = read(rfd, buf, BUFSIZ); - if (len < 0 && errno == EAGAIN) { - /* - * No data this time, but the writing end of the FIFO is still open. - * Do nothing. - */ - ; - } else if (len <= 0) { - /* - * Either an error or end of file. In either case, break out - * of the loop. - */ - close(rfd); - close(wfd); - if (len < 0) { - fprintf(stderr, "Error in reading from FIFO.\n"); - } else - fprintf(stderr, "[End]\n\r"); - break; - } else { - if (!got_some) { - if ((len=version_handshake(buf,len,wfd)) < 0) { - close(rfd); - close(wfd); - break; - } - if (protocol_ver >= 1) { - /* Tell run_erl size of terminal window */ - signal(SIGWINCH, handle_sigwinch); - raise(SIGWINCH); - } - got_some = 1; - } - - /* - * We successfully read at least one character. Write what we got. - */ - STATUS("Terminal write: \""); - if (write_all(1, buf, len) != len) { - fprintf(stderr, "Error in writing to terminal.\n"); - close(rfd); - close(wfd); - break; - } - STATUS("\" OK\r\n"); - } - } - } - - /* - * Reset terminal characterstics - * XXX - */ - tcsetattr(0, TCSADRAIN, &tty_rmode); - return 0; -} - -/* Call write() until entire buffer has been written or error. - * Return len or -1. - */ -static int write_all(int fd, const char* buf, int len) -{ - int left = len; - int written; - while (left) { - written = write(fd,buf,left); - if (written < 0) { - return -1; - } - left -= written; - buf += written; - } - return len; -} - -static int window_size_seq(char* buf, size_t bufsz) -{ -#ifdef TIOCGWINSZ - struct winsize ws; - static const char prefix[] = "\033_"; - static const char suffix[] = "\033\\"; - /* This Esc sequence is called "Application Program Command" - and seems suitable to use for our own customized stuff. */ - - if (ioctl(STDIN_FILENO, TIOCGWINSZ, &ws) == 0) { - int len = sn_printf(buf, bufsz, "%swinsize=%u,%u%s", - prefix, ws.ws_col, ws.ws_row, suffix); - return len; - } -#endif /* TIOCGWINSZ */ - return 0; -} - -/* to_erl run_erl - * | | - * |---------- '\022' -------->| (session start) - * | | - * |<---- "[run_erl v1-0]" ----| (version interval) - * | | - * |--- Esc_"version=1"Esc\ -->| (common version) - * | | - */ -static int version_handshake(char* buf, int len, int wfd) -{ - unsigned re_high=0, re_low; - char *end = find_str(buf,len,"]\n"); - - if (end && sscanf(buf,"[run_erl v%u-%u",&re_high,&re_low)==2) { - char wbuf[30]; - int wlen; - - if (re_low > RUN_ERL_HI_VER || re_high < RUN_ERL_LO_VER) { - fprintf(stderr,"Incompatible versions: to_erl=v%u-%u run_erl=v%u-%u\n", - RUN_ERL_HI_VER, RUN_ERL_LO_VER, re_high, re_low); - return -1; - } - /* Choose highest common version */ - protocol_ver = re_high < RUN_ERL_HI_VER ? re_high : RUN_ERL_HI_VER; - - wlen = sn_printf(wbuf, sizeof(wbuf), "\033_version=%u\033\\", - protocol_ver); - if (write_all(wfd, wbuf, wlen) < 0) { - fprintf(stderr,"Failed to send version handshake\n"); - return -1; - } - end += 2; - len -= (end-buf); - memmove(buf,end,len); - - } - else { /* we assume old run_erl without version handshake */ - protocol_ver = 0; - } - - if (re_high != RUN_ERL_HI_VER) { - fprintf(stderr,"run_erl has different version, " - "using common protocol level %u\n", protocol_ver); - } - - return len; -} - -#ifdef DEBUG -#define S(x) ((x) > 0 ? 1 : 0) +#include "to_erl_common.h" -static void show_terminal_settings(struct termios *t) -{ - fprintf(stderr,"c_iflag:\n"); - fprintf(stderr,"Signal interrupt on break: BRKINT %d\n", S(t->c_iflag & BRKINT)); - fprintf(stderr,"Map CR to NL on input: ICRNL %d\n", S(t->c_iflag & ICRNL)); - fprintf(stderr,"Ignore break condition: IGNBRK %d\n", S(t->c_iflag & IGNBRK)); - fprintf(stderr,"Ignore CR: IGNCR %d\n", S(t->c_iflag & IGNCR)); - fprintf(stderr,"Ignore char with par. err's: IGNPAR %d\n", S(t->c_iflag & IGNPAR)); - fprintf(stderr,"Map NL to CR on input: INLCR %d\n", S(t->c_iflag & INLCR)); - fprintf(stderr,"Enable input parity check: INPCK %d\n", S(t->c_iflag & INPCK)); - fprintf(stderr,"Strip character ISTRIP %d\n", S(t->c_iflag & ISTRIP)); - fprintf(stderr,"Enable start/stop input ctrl IXOFF %d\n", S(t->c_iflag & IXOFF)); - fprintf(stderr,"ditto output ctrl IXON %d\n", S(t->c_iflag & IXON)); - fprintf(stderr,"Mark parity errors PARMRK %d\n", S(t->c_iflag & PARMRK)); - fprintf(stderr,"\n"); - fprintf(stderr,"c_oflag:\n"); - fprintf(stderr,"Perform output processing OPOST %d\n", S(t->c_oflag & OPOST)); - fprintf(stderr,"\n"); - fprintf(stderr,"c_cflag:\n"); - fprintf(stderr,"Ignore modem status lines CLOCAL %d\n", S(t->c_cflag & CLOCAL)); - fprintf(stderr,"\n"); - fprintf(stderr,"c_local:\n"); - fprintf(stderr,"Enable echo ECHO %d\n", S(t->c_lflag & ECHO)); - fprintf(stderr,"\n"); - fprintf(stderr,"c_cc:\n"); - fprintf(stderr,"c_cc[VEOF] %d\n", t->c_cc[VEOF]); +int main(int argc,char **argv) { + return to_erl(argc,argv); } -#endif |