diff options
Diffstat (limited to 'erts/preloaded/src/prim_file.erl')
| -rw-r--r-- | erts/preloaded/src/prim_file.erl | 190 |
1 files changed, 127 insertions, 63 deletions
diff --git a/erts/preloaded/src/prim_file.erl b/erts/preloaded/src/prim_file.erl index 43e6f6cd88..8e0790e74a 100644 --- a/erts/preloaded/src/prim_file.erl +++ b/erts/preloaded/src/prim_file.erl @@ -1,19 +1,19 @@ %% %% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2000-2009. All Rights Reserved. -%% +%% +%% Copyright Ericsson AB 2000-2011. All Rights Reserved. +%% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in %% compliance with the License. You should have received a copy of the %% Erlang Public License along with this software. If not, it can be %% retrieved online at http://www.erlang.org/. -%% +%% %% Software distributed under the License is distributed on an "AS IS" %% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See %% the License for the specific language governing rights and limitations %% under the License. -%% +%% %% %CopyrightEnd% %% -module(prim_file). @@ -25,7 +25,7 @@ %%% Interface towards a single file's contents. Uses ?FD_DRV. %% Generic file contents operations --export([open/2, close/1, sync/1, position/2, truncate/1, +-export([open/2, close/1, datasync/1, sync/1, advise/4, position/2, truncate/1, write/2, pwrite/2, pwrite/3, read/2, read_line/1, pread/2, pread/3, copy/3]). %% Specialized file operations @@ -64,7 +64,7 @@ -include("file.hrl"). -define(DRV, efile). --define(FD_DRV, efile). +-define(FD_DRV, "efile"). -define(LARGEFILESIZE, (1 bsl 63)). @@ -96,6 +96,8 @@ -define(FILE_IPREAD, 27). -define(FILE_ALTNAME, 28). -define(FILE_READ_LINE, 29). +-define(FILE_FDATASYNC, 30). +-define(FILE_ADVISE, 31). %% Driver responses -define(FILE_RESP_OK, 0). @@ -107,6 +109,8 @@ -define(FILE_RESP_LDATA, 6). -define(FILE_RESP_N2DATA, 7). -define(FILE_RESP_EOF, 8). +-define(FILE_RESP_FNAME, 9). +-define(FILE_RESP_ALL_DATA, 10). %% Open modes for the driver's open function. -define(EFILE_MODE_READ, 1). @@ -114,9 +118,10 @@ -define(EFILE_MODE_READ_WRITE, 3). -define(EFILE_MODE_APPEND, 4). -define(EFILE_COMPRESSED, 8). +-define(EFILE_MODE_EXCL, 16). %% Use this mask to get just the mode bits to be passed to the driver. --define(EFILE_MODE_MASK, 15). +-define(EFILE_MODE_MASK, 31). %% Seek modes for the driver's seek function. -define(EFILE_SEEK_SET, 0). @@ -130,6 +135,13 @@ %% IPREAD variants -define(IPREAD_S32BU_P32BU, 0). +%% POSIX file advises +-define(POSIX_FADV_NORMAL, 0). +-define(POSIX_FADV_RANDOM, 1). +-define(POSIX_FADV_SEQUENTIAL, 2). +-define(POSIX_FADV_WILLNEED, 3). +-define(POSIX_FADV_DONTNEED, 4). +-define(POSIX_FADV_NOREUSE, 5). %%%----------------------------------------------------------------- @@ -143,7 +155,7 @@ %% Opens a file using the driver port Port. Returns {error, Reason} %% | {ok, FileDescriptor} open(Port, File, ModeList) when is_port(Port), - is_list(File), + (is_list(File) orelse is_binary(File)), is_list(ModeList) -> case open_mode(ModeList) of {Mode, _Portopts, _Setopts} -> @@ -155,10 +167,11 @@ open(_,_,_) -> {error, badarg}. %% Opens a file. Returns {error, Reason} | {ok, FileDescriptor}. -open(File, ModeList) when is_list(File), is_list(ModeList) -> +open(File, ModeList) when (is_list(File) orelse is_binary(File)), + is_list(ModeList) -> case open_mode(ModeList) of {Mode, Portopts, Setopts} -> - open_int({?FD_DRV, Portopts}, File, Mode, Setopts); + open_int({?FD_DRV, Portopts},File, Mode, Setopts); Reason -> {error, Reason} end; @@ -186,7 +199,7 @@ open_int({Driver, Portopts}, File, Mode, Setopts) -> end; open_int(Port, File, Mode, Setopts) -> M = Mode band ?EFILE_MODE_MASK, - case drv_command(Port, [<<?FILE_OPEN, M:32>>, File, 0]) of + case drv_command(Port, [<<?FILE_OPEN, M:32>>, pathname(File)]) of {ok, Number} -> open_int_setopts(Port, Number, Setopts); Error -> @@ -220,7 +233,35 @@ close(#file_descriptor{module = ?MODULE, data = {Port, _}}) -> close(Port) when is_port(Port) -> drv_close(Port). +-define(ADVISE(Offs, Len, Adv), + <<?FILE_ADVISE, Offs:64/signed, Len:64/signed, + Adv:32/signed>>). +%% Returns {error, Reason} | ok. +advise(#file_descriptor{module = ?MODULE, data = {Port, _}}, + Offset, Length, Advise) -> + case Advise of + normal -> + Cmd = ?ADVISE(Offset, Length, ?POSIX_FADV_NORMAL), + drv_command(Port, Cmd); + random -> + Cmd = ?ADVISE(Offset, Length, ?POSIX_FADV_RANDOM), + drv_command(Port, Cmd); + sequential -> + Cmd = ?ADVISE(Offset, Length, ?POSIX_FADV_SEQUENTIAL), + drv_command(Port, Cmd); + will_need -> + Cmd = ?ADVISE(Offset, Length, ?POSIX_FADV_WILLNEED), + drv_command(Port, Cmd); + dont_need -> + Cmd = ?ADVISE(Offset, Length, ?POSIX_FADV_DONTNEED), + drv_command(Port, Cmd); + no_reuse -> + Cmd = ?ADVISE(Offset, Length, ?POSIX_FADV_NOREUSE), + drv_command(Port, Cmd); + _ -> + {error, einval} + end. %% Returns {error, Reason} | ok. write(#file_descriptor{module = ?MODULE, data = {Port, _}}, Bytes) -> @@ -292,6 +333,9 @@ pwrite(#file_descriptor{module = ?MODULE}, _, _) -> {error, badarg}. +%% Returns {error, Reason} | ok. +datasync(#file_descriptor{module = ?MODULE, data = {Port, _}}) -> + drv_command(Port, [?FILE_FDATASYNC]). %% Returns {error, Reason} | ok. sync(#file_descriptor{module = ?MODULE, data = {Port, _}}) -> @@ -448,7 +492,7 @@ ipread_s32bu_p32bu(#file_descriptor{module = ?MODULE, data = {_, _}}, %% Returns {ok, Contents} | {error, Reason} -read_file(File) -> +read_file(File) when (is_list(File) orelse is_binary(File)) -> case drv_open(?FD_DRV, [binary]) of {ok, Port} -> Result = read_file(Port, File), @@ -456,11 +500,14 @@ read_file(File) -> Result; {error, _} = Error -> Error - end. + end; +read_file(_) -> + {error, badarg}. %% Takes a Port opened with open/1. -read_file(Port, File) when is_port(Port) -> - Cmd = [?FILE_READ_FILE | File], +read_file(Port, File) when is_port(Port), + (is_list(File) orelse is_binary(File)) -> + Cmd = [?FILE_READ_FILE | pathname(File)], case drv_command(Port, Cmd) of {error, enomem} -> %% It could possibly help to do a @@ -471,12 +518,14 @@ read_file(Port, File) when is_port(Port) -> drv_command(Port, Cmd); Result -> Result - end. + end; +read_file(_,_) -> + {error, badarg}. %% Returns {error, Reason} | ok. -write_file(File, Bin) -> +write_file(File, Bin) when (is_list(File) orelse is_binary(File)) -> case open(File, [binary, write]) of {ok, Handle} -> Result = write(Handle, Bin), @@ -484,8 +533,10 @@ write_file(File, Bin) -> Result; Error -> Error - end. - + end; +write_file(_, _) -> + {error, badarg}. + %%%----------------------------------------------------------------- @@ -498,7 +549,7 @@ write_file(File, Bin) -> %% Returns {ok, Port}, the Port should be used as first argument in all %% the following functions. Returns {error, Reason} upon failure. start() -> - try erlang:open_port({spawn, atom_to_list(?DRV)}, []) of + try erlang:open_port({spawn, atom_to_list(?DRV)}, [binary]) of Port -> {ok, Port} catch @@ -555,7 +606,7 @@ get_cwd(_, _) -> {error, badarg}. get_cwd_int(Drive) -> - get_cwd_int({?DRV, []}, Drive). + get_cwd_int({?DRV, [binary]}, Drive). get_cwd_int(Port, Drive) -> drv_command(Port, <<?FILE_PWD, Drive>>). @@ -565,7 +616,7 @@ get_cwd_int(Port, Drive) -> %% set_cwd/{1,2} set_cwd(Dir) -> - set_cwd_int({?DRV, []}, Dir). + set_cwd_int({?DRV, [binary]}, Dir). set_cwd(Port, Dir) when is_port(Port) -> set_cwd_int(Port, Dir). @@ -591,89 +642,88 @@ set_cwd_int(Port, Dir0) -> end), %% Dir is now either a string or an EXIT tuple. %% An EXIT tuple will fail in the following catch. - drv_command(Port, [?FILE_CHDIR, Dir, 0]). + drv_command(Port, [?FILE_CHDIR, pathname(Dir)]). %% delete/{1,2} delete(File) -> - delete_int({?DRV, []}, File). + delete_int({?DRV, [binary]}, File). delete(Port, File) when is_port(Port) -> delete_int(Port, File). delete_int(Port, File) -> - drv_command(Port, [?FILE_DELETE, File, 0]). + drv_command(Port, [?FILE_DELETE, pathname(File)]). %% rename/{2,3} rename(From, To) -> - rename_int({?DRV, []}, From, To). + rename_int({?DRV, [binary]}, From, To). rename(Port, From, To) when is_port(Port) -> rename_int(Port, From, To). rename_int(Port, From, To) -> - drv_command(Port, [?FILE_RENAME, From, 0, To, 0]). + drv_command(Port, [?FILE_RENAME, pathname(From), pathname(To)]). %% make_dir/{1,2} make_dir(Dir) -> - make_dir_int({?DRV, []}, Dir). + make_dir_int({?DRV, [binary]}, Dir). make_dir(Port, Dir) when is_port(Port) -> make_dir_int(Port, Dir). make_dir_int(Port, Dir) -> - drv_command(Port, [?FILE_MKDIR, Dir, 0]). + drv_command(Port, [?FILE_MKDIR, pathname(Dir)]). %% del_dir/{1,2} del_dir(Dir) -> - del_dir_int({?DRV, []}, Dir). + del_dir_int({?DRV, [binary]}, Dir). del_dir(Port, Dir) when is_port(Port) -> del_dir_int(Port, Dir). del_dir_int(Port, Dir) -> - drv_command(Port, [?FILE_RMDIR, Dir, 0]). + drv_command(Port, [?FILE_RMDIR, pathname(Dir)]). %% read_file_info/{1,2} read_file_info(File) -> - read_file_info_int({?DRV, []}, File). + read_file_info_int({?DRV, [binary]}, File). read_file_info(Port, File) when is_port(Port) -> read_file_info_int(Port, File). read_file_info_int(Port, File) -> - drv_command(Port, [?FILE_FSTAT, File, 0]). + drv_command(Port, [?FILE_FSTAT, pathname(File)]). %% altname/{1,2} altname(File) -> - altname_int({?DRV, []}, File). + altname_int({?DRV, [binary]}, File). altname(Port, File) when is_port(Port) -> altname_int(Port, File). altname_int(Port, File) -> - drv_command(Port, [?FILE_ALTNAME, File, 0]). - + drv_command(Port, [?FILE_ALTNAME, pathname(File)]). %% write_file_info/{2,3} write_file_info(File, Info) -> - write_file_info_int({?DRV, []}, File, Info). + write_file_info_int({?DRV, [binary]}, File, Info). write_file_info(Port, File, Info) when is_port(Port) -> write_file_info_int(Port, File, Info). @@ -699,72 +749,72 @@ write_file_info_int(Port, date_to_bytes(Atime), date_to_bytes(Mtime), date_to_bytes(Ctime), - File, 0]). + pathname(File)]). %% make_link/{2,3} make_link(Old, New) -> - make_link_int({?DRV, []}, Old, New). + make_link_int({?DRV, [binary]}, Old, New). make_link(Port, Old, New) when is_port(Port) -> make_link_int(Port, Old, New). make_link_int(Port, Old, New) -> - drv_command(Port, [?FILE_LINK, Old, 0, New, 0]). + drv_command(Port, [?FILE_LINK, pathname(Old), pathname(New)]). %% make_symlink/{2,3} make_symlink(Old, New) -> - make_symlink_int({?DRV, []}, Old, New). + make_symlink_int({?DRV, [binary]}, Old, New). make_symlink(Port, Old, New) when is_port(Port) -> make_symlink_int(Port, Old, New). make_symlink_int(Port, Old, New) -> - drv_command(Port, [?FILE_SYMLINK, Old, 0, New, 0]). + drv_command(Port, [?FILE_SYMLINK, pathname(Old), pathname(New)]). %% read_link/{2,3} read_link(Link) -> - read_link_int({?DRV, []}, Link). + read_link_int({?DRV, [binary]}, Link). read_link(Port, Link) when is_port(Port) -> read_link_int(Port, Link). read_link_int(Port, Link) -> - drv_command(Port, [?FILE_READLINK, Link, 0]). + drv_command(Port, [?FILE_READLINK, pathname(Link)]). %% read_link_info/{2,3} read_link_info(Link) -> - read_link_info_int({?DRV, []}, Link). + read_link_info_int({?DRV, [binary]}, Link). read_link_info(Port, Link) when is_port(Port) -> read_link_info_int(Port, Link). read_link_info_int(Port, Link) -> - drv_command(Port, [?FILE_LSTAT, Link, 0]). + drv_command(Port, [?FILE_LSTAT, pathname(Link)]). %% list_dir/{1,2} list_dir(Dir) -> - list_dir_int({?DRV, []}, Dir). + list_dir_int({?DRV, [binary]}, Dir). list_dir(Port, Dir) when is_port(Port) -> list_dir_int(Port, Dir). list_dir_int(Port, Dir) -> - drv_command(Port, [?FILE_READDIR, Dir, 0], []). + drv_command(Port, [?FILE_READDIR, pathname(Dir)], []). @@ -782,7 +832,7 @@ drv_open(Driver, Portopts) -> {ok, Port} catch error:Reason -> - {error,Reason} + {error, Reason} end. @@ -814,9 +864,9 @@ drv_command(Port, Command) -> drv_command(Port, Command, R) when is_binary(Command) -> drv_command(Port, Command, true, R); drv_command(Port, Command, R) -> - try erlang:iolist_to_binary(Command) of - Bin -> - drv_command(Port, Bin, true, R) + try erlang:iolist_size(Command) of + _ -> + drv_command(Port, Command, true, R) catch error:Reason -> {error, Reason} @@ -918,6 +968,8 @@ open_mode([compressed|Rest], Mode, Portopts, Setopts) -> open_mode([append|Rest], Mode, Portopts, Setopts) -> open_mode(Rest, Mode bor ?EFILE_MODE_APPEND bor ?EFILE_MODE_WRITE, Portopts, Setopts); +open_mode([exclusive|Rest], Mode, Portopts, Setopts) -> + open_mode(Rest, Mode bor ?EFILE_MODE_EXCL, Portopts, Setopts); open_mode([delayed_write|Rest], Mode, Portopts, Setopts) -> open_mode([{delayed_write, 64*1024, 2000}|Rest], Mode, Portopts, Setopts); @@ -983,16 +1035,14 @@ lseek_position(_) -> translate_response(?FILE_RESP_OK, []) -> ok; -translate_response(?FILE_RESP_OK, Data) -> - {ok, Data}; translate_response(?FILE_RESP_ERROR, List) when is_list(List) -> {error, list_to_atom(List)}; translate_response(?FILE_RESP_NUMBER, List) -> {N, []} = get_uint64(List), {ok, N}; translate_response(?FILE_RESP_DATA, List) -> - {N, Data} = get_uint64(List), - {ok, {N, Data}}; + {_N, _Data} = ND = get_uint64(List), + {ok, ND}; translate_response(?FILE_RESP_INFO, List) when is_list(List) -> {ok, transform_info_ints(get_uint32s(List))}; translate_response(?FILE_RESP_NUMERR, L0) -> @@ -1031,6 +1081,14 @@ translate_response(?FILE_RESP_N2DATA = X, L0) when is_list(L0) -> end; translate_response(?FILE_RESP_EOF, []) -> eof; +translate_response(?FILE_RESP_FNAME, []) -> + ok; +translate_response(?FILE_RESP_FNAME, Data) when is_binary(Data) -> + {ok, prim_file:internal_native2name(Data)}; +translate_response(?FILE_RESP_FNAME, Data) -> + {ok, Data}; +translate_response(?FILE_RESP_ALL_DATA, Data) -> + {ok, Data}; translate_response(X, Data) -> {error, {bad_response_from_port, [X | Data]}}. @@ -1077,14 +1135,14 @@ date_to_bytes(undefined) -> date_to_bytes({{Y, Mon, D}, {H, Min, S}}) -> <<Y:32, Mon:32, D:32, H:32, Min:32, S:32>>. -% uint64([[X1, X2, X3, X4] = Y1 | [X5, X6, X7, X8] = Y2]) -> -% (uint32(Y1) bsl 32) bor uint32(Y2). +%% uint64([[X1, X2, X3, X4] = Y1 | [X5, X6, X7, X8] = Y2]) -> +%% (uint32(Y1) bsl 32) bor uint32(Y2). -% uint64(X1, X2, X3, X4, X5, X6, X7, X8) -> -% (uint32(X1, X2, X3, X4) bsl 32) bor uint32(X5, X6, X7, X8). +%% uint64(X1, X2, X3, X4, X5, X6, X7, X8) -> +%% (uint32(X1, X2, X3, X4) bsl 32) bor uint32(X5, X6, X7, X8). -% uint32([X1,X2,X3,X4]) -> -% (X1 bsl 24) bor (X2 bsl 16) bor (X3 bsl 8) bor X4. +%% uint32([X1,X2,X3,X4]) -> +%% (X1 bsl 24) bor (X2 bsl 16) bor (X3 bsl 8) bor X4. uint32(X1,X2,X3,X4) -> (X1 bsl 24) bor (X2 bsl 16) bor (X3 bsl 8) bor X4. @@ -1166,3 +1224,9 @@ lists_split([Hd | Tl], N, Rev) -> reverse(X) -> lists:reverse(X, []). reverse(L, T) -> lists:reverse(L, T). + +% Will add zero termination too +% The 'EXIT' tuple from a bad argument will eventually generate an error +% in list_to_binary, which is caught and generates the {error,badarg} return +pathname(File) -> + (catch prim_file:internal_name2native(File)). |