diff options
Diffstat (limited to 'erts')
-rw-r--r-- | erts/emulator/drivers/common/inet_drv.c | 141 | ||||
-rw-r--r-- | erts/preloaded/ebin/prim_inet.beam | bin | 73092 -> 72748 bytes | |||
-rw-r--r-- | erts/preloaded/src/prim_inet.erl | 16 |
3 files changed, 143 insertions, 14 deletions
diff --git a/erts/emulator/drivers/common/inet_drv.c b/erts/emulator/drivers/common/inet_drv.c index 10ef20fc82..119d6c097d 100644 --- a/erts/emulator/drivers/common/inet_drv.c +++ b/erts/emulator/drivers/common/inet_drv.c @@ -835,6 +835,10 @@ static int my_strncasecmp(const char *s1, const char *s2, size_t n) #define TCP_ADDF_PENDING_SHUT_RDWR 32 /* Call shutdown(sock, SHUT_RDWR) when queue empties */ #define TCP_ADDF_PENDING_SHUTDOWN \ (TCP_ADDF_PENDING_SHUT_WR | TCP_ADDF_PENDING_SHUT_RDWR) +#define TCP_ADDF_SHOW_ECONNRESET 64 /* Tell user about incoming RST */ +#define TCP_ADDF_DELAYED_ECONNRESET 128 /* An ECONNRESET error occured on send or shutdown */ +#define TCP_ADDF_SHUTDOWN_WR_DONE 256 /* A shutdown(sock, SHUT_WR) or SHUT_RDWR was made */ +#define TCP_ADDF_LINGER_ZERO 512 /* Discard driver queue on port close */ /* *_REQ_* replies */ #define INET_REP_ERROR 0 @@ -879,6 +883,7 @@ static int my_strncasecmp(const char *s1, const char *s2, size_t n) #define INET_LOPT_MSGQ_HIWTRMRK 36 /* set local msgq high watermark */ #define INET_LOPT_MSGQ_LOWTRMRK 37 /* set local msgq low watermark */ #define INET_LOPT_NETNS 38 /* Network namespace pathname */ +#define INET_LOPT_TCP_SHOW_ECONNRESET 39 /* tell user about incoming RST */ /* SCTP options: a separate range, from 100: */ #define SCTP_OPT_RTOINFO 100 #define SCTP_OPT_ASSOCINFO 101 @@ -6138,7 +6143,12 @@ static int inet_set_opts(inet_descriptor* desc, char* ptr, int len) desc->active_count = 0; if ((desc->stype == SOCK_STREAM) && (desc->active != INET_PASSIVE) && (desc->state == INET_STATE_CLOSED)) { - tcp_closed_message((tcp_descriptor *) desc); + tcp_descriptor *tdesc = (tcp_descriptor *) desc; + if (tdesc->tcp_add_flags & TCP_ADDF_DELAYED_ECONNRESET) { + tdesc->tcp_add_flags &= ~TCP_ADDF_DELAYED_ECONNRESET; + tcp_error_message(tdesc, ECONNRESET); + } + tcp_closed_message(tdesc); if (desc->exitf) { driver_exit(desc->port, 0); return 0; /* Give up on this socket, descriptor lost */ @@ -6255,6 +6265,16 @@ static int inet_set_opts(inet_descriptor* desc, char* ptr, int len) continue; #endif + case INET_LOPT_TCP_SHOW_ECONNRESET: + if (desc->sprotocol == IPPROTO_TCP) { + tcp_descriptor* tdesc = (tcp_descriptor*) desc; + if (ival) + tdesc->tcp_add_flags |= TCP_ADDF_SHOW_ECONNRESET; + else + tdesc->tcp_add_flags &= ~TCP_ADDF_SHOW_ECONNRESET; + } + continue; + case INET_OPT_REUSEADDR: #ifdef __WIN32__ continue; /* Bjorn says */ @@ -6299,6 +6319,13 @@ static int inet_set_opts(inet_descriptor* desc, char* ptr, int len) arg_sz = sizeof(li_val); DEBUGF(("inet_set_opts(%ld): s=%d, SO_LINGER=%d,%d", (long)desc->port, desc->s, li_val.l_onoff,li_val.l_linger)); + if (desc->sprotocol == IPPROTO_TCP) { + tcp_descriptor* tdesc = (tcp_descriptor*) desc; + if (li_val.l_onoff && li_val.l_linger == 0) + tdesc->tcp_add_flags |= TCP_ADDF_LINGER_ZERO; + else + tdesc->tcp_add_flags &= ~TCP_ADDF_LINGER_ZERO; + } break; case INET_OPT_PRIORITY: @@ -7234,6 +7261,17 @@ static ErlDrvSSizeT inet_fill_opts(inet_descriptor* desc, continue; #endif + case INET_LOPT_TCP_SHOW_ECONNRESET: + if (desc->sprotocol == IPPROTO_TCP) { + tcp_descriptor* tdesc = (tcp_descriptor*) desc; + *ptr++ = opt; + ival = !!(tdesc->tcp_add_flags & TCP_ADDF_SHOW_ECONNRESET); + put_int32(ival, ptr); + } else { + TRUNCATE_TO(0,ptr); + } + continue; + case INET_OPT_PRIORITY: #ifdef SO_PRIORITY type = SO_PRIORITY; @@ -9077,6 +9115,11 @@ static tcp_descriptor* tcp_inet_copy(tcp_descriptor* desc,SOCKET s, copy_desc->low = desc->low; copy_desc->send_timeout = desc->send_timeout; copy_desc->send_timeout_close = desc->send_timeout_close; + + if (desc->tcp_add_flags & TCP_ADDF_SHOW_ECONNRESET) + copy_desc->tcp_add_flags |= TCP_ADDF_SHOW_ECONNRESET; + else + copy_desc->tcp_add_flags &= ~TCP_ADDF_SHOW_ECONNRESET; /* The new port will be linked and connected to the original caller */ port = driver_create_port(port, owner, "tcp_inet", (ErlDrvData) copy_desc); @@ -9438,7 +9481,11 @@ static ErlDrvSSizeT tcp_inet_ctl(ErlDrvData e, unsigned int cmd, if (desc->tcp_add_flags & TCP_ADDF_DELAYED_CLOSE_RECV) { desc->tcp_add_flags &= ~(TCP_ADDF_DELAYED_CLOSE_RECV| TCP_ADDF_DELAYED_CLOSE_SEND); - return ctl_reply(INET_REP_ERROR, "closed", 6, rbuf, rsize); + if (desc->tcp_add_flags & TCP_ADDF_DELAYED_ECONNRESET) { + desc->tcp_add_flags &= ~TCP_ADDF_DELAYED_ECONNRESET; + return ctl_reply(INET_REP_ERROR, "econnreset", 10, rbuf, rsize); + } else + return ctl_reply(INET_REP_ERROR, "closed", 6, rbuf, rsize); } return ctl_error(ENOTCONN, rbuf, rsize); } @@ -9499,6 +9546,8 @@ static ErlDrvSSizeT tcp_inet_ctl(ErlDrvData e, unsigned int cmd, return ctl_reply(INET_REP_OK, NULL, 0, rbuf, rsize); } if (IS_SOCKET_ERROR(sock_shutdown(INETP(desc)->s, how))) { + if (how != TCP_SHUT_RD) + desc->tcp_add_flags |= TCP_ADDF_SHUTDOWN_WR_DONE; return ctl_error(sock_errno(), rbuf, rsize); } else { return ctl_reply(INET_REP_OK, NULL, 0, rbuf, rsize); @@ -9633,7 +9682,13 @@ static void tcp_inet_commandv(ErlDrvData e, ErlIOVec* ev) if (!IS_CONNECTED(INETP(desc))) { if (desc->tcp_add_flags & TCP_ADDF_DELAYED_CLOSE_SEND) { desc->tcp_add_flags &= ~TCP_ADDF_DELAYED_CLOSE_SEND; - inet_reply_error_am(INETP(desc), am_closed); + if (desc->tcp_add_flags & TCP_ADDF_DELAYED_ECONNRESET) { + /* Don't clear flag. Leave it enabled for the next receive + * operation. + */ + inet_reply_error(INETP(desc), ECONNRESET); + } else + inet_reply_error_am(INETP(desc), am_closed); } else inet_reply_error(INETP(desc), ENOTCONN); @@ -9652,6 +9707,8 @@ static void tcp_inet_flush(ErlDrvData e) /* Discard send queue to avoid hanging port (OTP-7615) */ tcp_clear_output(desc); } + if (desc->tcp_add_flags & TCP_ADDF_LINGER_ZERO) + tcp_clear_output(desc); } static void tcp_inet_process_exit(ErlDrvData e, ErlDrvMonitor *monitorp) @@ -10014,7 +10071,10 @@ static int tcp_recv(tcp_descriptor* desc, int request_len) int err = sock_errno(); if (err == ECONNRESET) { DEBUGF((" => detected close (connreset)\r\n")); - return tcp_recv_closed(desc); + if (desc->tcp_add_flags & TCP_ADDF_SHOW_ECONNRESET) + return tcp_recv_error(desc, err); + else + return tcp_recv_closed(desc); } if (err == ERRNO_BLOCK) { DEBUGF((" => would block\r\n")); @@ -10226,7 +10286,19 @@ static void tcp_inet_event(ErlDrvData e, ErlDrvEvent event) if (netEv.lNetworkEvents & FD_CLOSE) { /* error in err = netEv.iErrorCode[FD_CLOSE_BIT] */ DEBUGF(("Detected close in %s, line %d\r\n", __FILE__, __LINE__)); - tcp_recv_closed(desc); + if (desc->tcp_add_flags & TCP_ADDF_SHOW_ECONNRESET) { + err = netEv.iErrorCode[FD_CLOSE_BIT]; + if (err == ECONNRESET) + tcp_recv_error(desc, err); + else if (err == ECONNABORTED && IS_CONNECTED(INETP(desc))) { + /* translate this error to ECONNRESET */ + tcp_recv_error(desc, ECONNRESET); + } + else + tcp_recv_closed(desc); + } + else + tcp_recv_closed(desc); } DEBUGF(("tcp_inet_event(%ld) }\r\n", (long)desc->inet.port)); return; @@ -10535,6 +10607,9 @@ static int tcp_inet_input(tcp_descriptor* desc, HANDLE event) static int tcp_send_or_shutdown_error(tcp_descriptor* desc, int err) { + int show_econnreset = (err == ECONNRESET + && desc->tcp_add_flags & TCP_ADDF_SHOW_ECONNRESET); + /* * If the port is busy, we must do some clean-up before proceeding. */ @@ -10550,14 +10625,21 @@ static int tcp_send_or_shutdown_error(tcp_descriptor* desc, int err) /* * We used to handle "expected errors" differently from unexpected ones. - * Now we handle all errors in the same way. We just have to distinguish - * between passive and active sockets. + * Now we handle all errors in the same way (unless the show_econnreset + * socket option is enabled). We just have to distinguish between passive + * and active sockets. */ DEBUGF(("driver_failure_eof(%ld) in %s, line %d\r\n", (long)desc->inet.port, __FILE__, __LINE__)); if (desc->inet.active) { - tcp_closed_message(desc); - inet_reply_error_am(INETP(desc), am_closed); + if (show_econnreset) { + tcp_error_message(desc, err); + tcp_closed_message(desc); + inet_reply_error(INETP(desc), err); + } else { + tcp_closed_message(desc); + inet_reply_error_am(INETP(desc), am_closed); + } if (desc->inet.exitf) driver_exit(desc->inet.port, 0); else @@ -10569,7 +10651,10 @@ static int tcp_send_or_shutdown_error(tcp_descriptor* desc, int err) erl_inet_close(INETP(desc)); if (desc->inet.caller) { - inet_reply_error_am(INETP(desc), am_closed); + if (show_econnreset) + inet_reply_error(INETP(desc), err); + else + inet_reply_error_am(INETP(desc), am_closed); } else { /* No blocking send op to reply to right now. @@ -10586,12 +10671,46 @@ static int tcp_send_or_shutdown_error(tcp_descriptor* desc, int err) * in the receive operation. */ desc->tcp_add_flags |= TCP_ADDF_DELAYED_CLOSE_RECV; + + if (show_econnreset) { + /* Return {error, econnreset} instead of {error, closed} + * on send or receive operations. + */ + desc->tcp_add_flags |= TCP_ADDF_DELAYED_ECONNRESET; + } } return -1; } static int tcp_send_error(tcp_descriptor* desc, int err) { + /* EPIPE errors usually occur in one of three ways: + * 1. We write to a socket when we've already shutdown() the write side. On + * Windows the error returned for this is ESHUTDOWN rather than EPIPE. + * 2. The TCP peer sends us an RST through no fault of our own (perhaps + * by aborting the connection using SO_LINGER) and we then attempt + * to write to the socket. On Linux and Windows we would actually + * receive an ECONNRESET error for this, but on the BSDs, Darwin, + * Illumos and presumably Solaris, it's an EPIPE. + * 3. We cause the TCP peer to send us an RST by writing to a socket + * after we receive a FIN from them. Our first write will be + * successful, but if the they have closed the connection (rather + * than just shutting down the write side of it) this will cause their + * OS to send us an RST. Then, when we attempt to write to the socket + * a second time, we will get an EPIPE error. On Windows we get an + * ECONNABORTED. + * + * What we are going to do here is to treat all EPIPE messages that aren't + * of type 1 as ECONNRESET errors. This will allow users who have the + * show_econnreset socket option enabled to receive {error, econnreset} on + * both send and recv operations to indicate that an RST has been received. + */ +#ifdef __WIN_32__ + if (err == ECONNABORTED) + err = ECONNRESET; +#endif + if (err == EPIPE && !(desc->tcp_add_flags & TCP_ADDF_SHUTDOWN_WR_DONE)) + err = ECONNRESET; return tcp_send_or_shutdown_error(desc, err); } @@ -10811,6 +10930,8 @@ static void tcp_shutdown_async(tcp_descriptor* desc) TCP_SHUT_WR : TCP_SHUT_RDWR; if (IS_SOCKET_ERROR(sock_shutdown(INETP(desc)->s, how))) tcp_shutdown_error(desc, sock_errno()); + else + desc->tcp_add_flags |= TCP_ADDF_SHUTDOWN_WR_DONE; } #ifdef __OSE__ diff --git a/erts/preloaded/ebin/prim_inet.beam b/erts/preloaded/ebin/prim_inet.beam Binary files differindex 6729f06b79..5a188be3ba 100644 --- a/erts/preloaded/ebin/prim_inet.beam +++ b/erts/preloaded/ebin/prim_inet.beam diff --git a/erts/preloaded/src/prim_inet.erl b/erts/preloaded/src/prim_inet.erl index 622e1be869..5e0b38aa68 100644 --- a/erts/preloaded/src/prim_inet.erl +++ b/erts/preloaded/src/prim_inet.erl @@ -146,11 +146,16 @@ shutdown_1(S, How) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% close(S) when is_port(S) -> - case subscribe(S, [subs_empty_out_q]) of - {ok, [{subs_empty_out_q,N}]} when N > 0 -> - close_pend_loop(S, N); %% wait for pending output to be sent + case getopt(S, linger) of + {ok,{true,0}} -> + close_port(S); _ -> - close_port(S) + case subscribe(S, [subs_empty_out_q]) of + {ok, [{subs_empty_out_q,N}]} when N > 0 -> + close_pend_loop(S, N); %% wait for pending output to be sent + _ -> + close_port(S) + end end. close_pend_loop(S, N) -> @@ -1140,6 +1145,7 @@ enc_opt(delay_send) -> ?INET_LOPT_TCP_DELAY_SEND; enc_opt(packet_size) -> ?INET_LOPT_PACKET_SIZE; enc_opt(read_packets) -> ?INET_LOPT_READ_PACKETS; enc_opt(netns) -> ?INET_LOPT_NETNS; +enc_opt(show_econnreset) -> ?INET_LOPT_TCP_SHOW_ECONNRESET; enc_opt(raw) -> ?INET_OPT_RAW; % Names of SCTP opts: enc_opt(sctp_rtoinfo) -> ?SCTP_OPT_RTOINFO; @@ -1197,6 +1203,7 @@ dec_opt(?INET_LOPT_TCP_DELAY_SEND) -> delay_send; dec_opt(?INET_LOPT_PACKET_SIZE) -> packet_size; dec_opt(?INET_LOPT_READ_PACKETS) -> read_packets; dec_opt(?INET_LOPT_NETNS) -> netns; +dec_opt(?INET_LOPT_TCP_SHOW_ECONNRESET) -> show_econnreset; dec_opt(?INET_OPT_RAW) -> raw; dec_opt(I) when is_integer(I) -> undefined. @@ -1296,6 +1303,7 @@ type_opt_1(delay_send) -> bool; type_opt_1(packet_size) -> uint; type_opt_1(read_packets) -> uint; type_opt_1(netns) -> binary; +type_opt_1(show_econnreset) -> bool; %% %% SCTP options (to be set). If the type is a record type, the corresponding %% record signature is returned, otherwise, an "elementary" type tag |