aboutsummaryrefslogtreecommitdiffstats
path: root/erts
diff options
context:
space:
mode:
Diffstat (limited to 'erts')
-rw-r--r--erts/configure.in30
-rw-r--r--erts/doc/src/crash_dump.xml5
-rw-r--r--erts/doc/src/erl.xml3
-rw-r--r--erts/doc/src/erl_driver.xml3
-rw-r--r--erts/emulator/beam/erl_alloc.types5
-rw-r--r--erts/emulator/beam/erl_bif_port.c15
-rw-r--r--erts/emulator/drivers/unix/ttsl_drv.c166
-rw-r--r--erts/emulator/drivers/win32/ttsl_drv.c16
-rw-r--r--erts/emulator/sys/unix/sys.c253
-rw-r--r--erts/emulator/test/port_SUITE.erl51
-rw-r--r--erts/etc/unix/etp-commands.in33
-rw-r--r--erts/etc/win32/Install.c2
-rw-r--r--erts/etc/win32/erl.c2
13 files changed, 532 insertions, 52 deletions
diff --git a/erts/configure.in b/erts/configure.in
index c8b96c50f0..766e35fb2b 100644
--- a/erts/configure.in
+++ b/erts/configure.in
@@ -3988,7 +3988,7 @@ dnl If set to --with-ssl=PATH we use that path as the prefix, i.e. we
dnl use "PATH/include" and "PATH/lib".
AC_SUBST(SSL_INCLUDE)
-AC_SUBST(SSL_ROOT)
+AC_SUBST(SSL_INCDIR)
AC_SUBST(SSL_LIBDIR)
AC_SUBST(SSL_CRYPTO_LIBNAME)
AC_SUBST(SSL_SSL_LIBNAME)
@@ -4082,6 +4082,15 @@ AS_HELP_STRING([--with-ssl=PATH], [specify location of OpenSSL include and lib])
AS_HELP_STRING([--with-ssl], [use SSL (default)])
AS_HELP_STRING([--without-ssl], [don't use SSL]))
+AC_ARG_WITH(ssl-incl,
+AS_HELP_STRING([--with-ssl-incl=PATH], [location of OpenSSL include dir, if different than specified by --with-ssl=PATH]),
+[
+case X$with_ssl in
+ X | Xyes | Xno) AC_MSG_ERROR([--with-ssl-incl=PATH set without --with-ssl=PATH]);;
+esac
+],
+[with_ssl_incl=$with_ssl]) #default
+
AC_ARG_ENABLE(dynamic-ssl-lib,
AS_HELP_STRING([--disable-dynamic-ssl-lib],
[disable using dynamic openssl libraries]),
@@ -4196,7 +4205,7 @@ case "$erl_xcomp_without_sysroot-$with_ssl" in
dir="$erl_xcomp_sysroot$rdir"
if test -f "$erl_xcomp_isysroot$rdir/include/openssl/opensslv.h"; then
is_real_ssl=yes
- SSL_ROOT="$dir"
+ SSL_INCDIR="$dir"
if test "x$MIXED_CYGWIN" = "xyes" -o "x$MIXED_MSYS" = "xyes"; then
if test -f "$dir/lib/VC/libeay32.lib"; then
SSL_RUNTIME_LIBDIR="$rdir/lib/VC"
@@ -4326,8 +4335,8 @@ case "$erl_xcomp_without_sysroot-$with_ssl" in
# Trust OpenBSD to have everything the in the correct locations.
ssl_found=yes
ssl_linkable=yes
- SSL_ROOT="$erl_xcomp_sysroot/usr"
- AC_MSG_RESULT([$SSL_ROOT])
+ SSL_INCDIR="$erl_xcomp_sysroot/usr"
+ AC_MSG_RESULT([$SSL_INCDIR])
SSL_RUNTIME_LIB="/usr/lib"
SSL_LIB="$erl_xcomp_sysroot/usr/lib"
SSL_BINDIR="/usr/sbin"
@@ -4394,7 +4403,10 @@ dnl so it is - be adoptable
if test ! -d "$with_ssl" ; then
AC_MSG_ERROR(Invalid path to option --with-ssl=PATH)
fi
- SSL_ROOT="$with_ssl"
+ if test ! -d "$with_ssl_incl" ; then
+ AC_MSG_ERROR(Invalid path to option --with-ssl-incl=PATH)
+ fi
+ SSL_INCDIR="$with_ssl_incl"
SSL_CRYPTO_LIBNAME=crypto
SSL_SSL_LIBNAME=ssl
if test "x$MIXED_CYGWIN" = "xyes" -o "x$MIXED_MSYS" = "xyes" && test -d "$with_ssl/lib/VC"; then
@@ -4444,12 +4456,12 @@ dnl so it is - be adoptable
elif test '!' -f ${SSL_LIBDIR}/lib${SSL_CRYPTO_LIBNAME}.so -a '!' -f "$SSL_LIBDIR/lib${SSL_CRYPTO_LIBNAME}.dylib"; then
SSL_STATIC_ONLY=yes
fi
- SSL_INCLUDE="-I$with_ssl/include"
+ SSL_INCLUDE="-I$with_ssl_incl/include"
SSL_APP=ssl
CRYPTO_APP=crypto
SSH_APP=ssh
if test "$cross_compiling" = "yes"; then
- SSL_RUNTIME_LIBDIR=`echo "$SSL_LIBDIR" | sed -n "s|^$erl_xcomp_sysroot\(.*\)\$|\1|p"`
+ SSL_RUNTIME_LIBDIR=`echo "$SSL_LIBDIR" | sed -n "s|^$erl_xcomp_sysroot\(/*\)\(.*\)\$|/\2|p"`
else
SSL_RUNTIME_LIBDIR="$SSL_LIBDIR"
fi
@@ -4507,8 +4519,8 @@ if test "x$SSL_APP" != "x" ; then
SSL_KRB5_INCLUDE=
if test "x$ssl_krb5_enabled" = "xyes" ; then
AC_MSG_CHECKING(for krb5.h in standard locations)
- for dir in $extra_dir "$SSL_ROOT/include" "$SSL_ROOT/include/openssl" \
- "$SSL_ROOT/include/kerberos" \
+ for dir in $extra_dir "$SSL_INCDIR/include" "$SSL_INCDIR/include/openssl" \
+ "$SSL_INCDIR/include/kerberos" \
"$erl_xcomp_isysroot/cygdrive/c/kerberos/include" \
"$erl_xcomp_isysroot/usr/local/kerberos/include" \
"$erl_xcomp_isysroot/usr/kerberos/include" \
diff --git a/erts/doc/src/crash_dump.xml b/erts/doc/src/crash_dump.xml
index d3de29b876..2b5fc877c3 100644
--- a/erts/doc/src/crash_dump.xml
+++ b/erts/doc/src/crash_dump.xml
@@ -115,8 +115,9 @@
sockets/pipes can be used simultaneously by Erlang (due to
limitations in the Unix <c><![CDATA[select]]></c> call). The number of
open regular files is not affected by this.</item>
- <item>"Received SIGUSR1" - The SIGUSR1 signal was sent to the
- Erlang machine (Unix only).</item>
+ <item>"Received SIGUSR1" - Sending the SIGUSR1 signal to a
+ Erlang machine (Unix only) forces a crash dump. This slogan reflects
+ that the Erlang machine crash-dumped due to receiving that signal.</item>
<item>"Kernel pid terminated (<em>Who</em>)
(<em>Exit-reason</em>)" - The kernel supervisor has detected
a failure, usually that the <c><![CDATA[application_controller]]></c>
diff --git a/erts/doc/src/erl.xml b/erts/doc/src/erl.xml
index 141754e4f9..d11f6b0c6d 100644
--- a/erts/doc/src/erl.xml
+++ b/erts/doc/src/erl.xml
@@ -525,7 +525,8 @@
core dump and no crash dump if an internal error is detected.</p>
<p>Calling <c>erlang:halt/1</c> with a string argument will still
- produce a crash dump.</p>
+ produce a crash dump. On Unix systems, sending an emulator process
+ a SIGUSR1 signal will also force a crash dump.</p>
</item>
<tag><marker id="+e"><c><![CDATA[+e Number]]></c></marker></tag>
<item>
diff --git a/erts/doc/src/erl_driver.xml b/erts/doc/src/erl_driver.xml
index 4a1aab75c7..77fc906aca 100644
--- a/erts/doc/src/erl_driver.xml
+++ b/erts/doc/src/erl_driver.xml
@@ -2033,7 +2033,8 @@ ERL_DRV_MAP int sz
entry function is called. If <c>ready_async</c> is null in
the driver entry, the <c>async_free</c> function is called
instead.</p>
- <p>The return value is a handle to the asynchronous task.</p>
+ <p>The return value is -1 if the <c>driver_async</c> call
+ fails.</p>
<note>
<p>As of erts version 5.5.4.3 the default stack size for
threads in the async-thread pool is 16 kilowords,
diff --git a/erts/emulator/beam/erl_alloc.types b/erts/emulator/beam/erl_alloc.types
index 029ac09b26..61def65235 100644
--- a/erts/emulator/beam/erl_alloc.types
+++ b/erts/emulator/beam/erl_alloc.types
@@ -267,7 +267,6 @@ type CODE_IX_LOCK_Q SHORT_LIVED SYSTEM code_ix_lock_q
type PROC_INTERVAL LONG_LIVED SYSTEM process_interval
type BUSY_CALLER_TAB SHORT_LIVED SYSTEM busy_caller_table
type BUSY_CALLER SHORT_LIVED SYSTEM busy_caller
-type PORT_DATA_HEAP STANDARD SYSTEM port_data_heap
type PROC_SYS_TSK SHORT_LIVED PROCESSES proc_sys_task
type PROC_SYS_TSK_QS SHORT_LIVED PROCESSES proc_sys_task_queues
@@ -364,6 +363,7 @@ type NLINK_SH STANDARD_LOW PROCESSES nlink_sh
type AINFO_REQ STANDARD_LOW SYSTEM alloc_info_request
type SCHED_WTIME_REQ STANDARD_LOW SYSTEM sched_wall_time_request
type GC_INFO_REQ STANDARD_LOW SYSTEM gc_info_request
+type PORT_DATA_HEAP STANDARD_LOW SYSTEM port_data_heap
+else # "fullword"
@@ -383,6 +383,7 @@ type NLINK_SH FIXED_SIZE PROCESSES nlink_sh
type AINFO_REQ SHORT_LIVED SYSTEM alloc_info_request
type SCHED_WTIME_REQ SHORT_LIVED SYSTEM sched_wall_time_request
type GC_INFO_REQ SHORT_LIVED SYSTEM gc_info_request
+type PORT_DATA_HEAP STANDARD SYSTEM port_data_heap
+endif
@@ -414,6 +415,8 @@ type CS_PROG_PATH LONG_LIVED SYSTEM cs_prog_path
type ENVIRONMENT TEMPORARY SYSTEM environment
type PUTENV_STR SYSTEM SYSTEM putenv_string
type PRT_REP_EXIT STANDARD SYSTEM port_report_exit
+type SYS_BLOCKING STANDARD SYSTEM sys_blocking
+type SYS_WRITE_BUF TEMPORARY SYSTEM sys_write_buf
+endif
diff --git a/erts/emulator/beam/erl_bif_port.c b/erts/emulator/beam/erl_bif_port.c
index afb33c1cdb..64bd598ba6 100644
--- a/erts/emulator/beam/erl_bif_port.c
+++ b/erts/emulator/beam/erl_bif_port.c
@@ -493,8 +493,8 @@ void
erts_cleanup_port_data(Port *prt)
{
ASSERT(erts_atomic32_read_nob(&prt->state) & ERTS_PORT_SFLGS_INVALID_LOOKUP);
- cleanup_old_port_data(erts_smp_atomic_read_nob(&prt->data));
- erts_smp_atomic_set_nob(&prt->data, (erts_aint_t) THE_NON_VALUE);
+ cleanup_old_port_data(erts_smp_atomic_xchg_nob(&prt->data,
+ (erts_aint_t) NULL));
}
Uint
@@ -554,6 +554,7 @@ BIF_RETTYPE port_set_data_2(BIF_ALIST_2)
hp = &pdhp->heap[0];
pdhp->off_heap.first = NULL;
pdhp->off_heap.overhead = 0;
+ pdhp->hsize = hsize;
pdhp->data = copy_struct(BIF_ARG_2, hsize, &hp, &pdhp->off_heap);
data = (erts_aint_t) pdhp;
ASSERT((data & 0x3) == 0);
@@ -561,8 +562,14 @@ BIF_RETTYPE port_set_data_2(BIF_ALIST_2)
data = erts_smp_atomic_xchg_wb(&prt->data, data);
+ if (data == (erts_aint_t)NULL) {
+ /* Port terminated by racing thread */
+ data = erts_smp_atomic_xchg_wb(&prt->data, data);
+ ASSERT(data != (erts_aint_t)NULL);
+ cleanup_old_port_data(data);
+ BIF_ERROR(BIF_P, BADARG);
+ }
cleanup_old_port_data(data);
-
BIF_RET(am_true);
}
@@ -581,6 +588,8 @@ BIF_RETTYPE port_get_data_1(BIF_ALIST_1)
BIF_ERROR(BIF_P, BADARG);
data = erts_smp_atomic_read_ddrb(&prt->data);
+ if (data == (erts_aint_t)NULL)
+ BIF_ERROR(BIF_P, BADARG); /* Port terminated by racing thread */
if ((data & 0x3) != 0) {
res = (Eterm) (UWord) data;
diff --git a/erts/emulator/drivers/unix/ttsl_drv.c b/erts/emulator/drivers/unix/ttsl_drv.c
index 491e0a090e..be2fee1f25 100644
--- a/erts/emulator/drivers/unix/ttsl_drv.c
+++ b/erts/emulator/drivers/unix/ttsl_drv.c
@@ -32,6 +32,10 @@ static ErlDrvData ttysl_start(ErlDrvPort, char*);
#ifdef HAVE_TERMCAP /* else make an empty driver that can not be opened */
+#ifndef WANT_NONBLOCKING
+#define WANT_NONBLOCKING
+#endif
+
#include "sys.h"
#include <ctype.h>
#include <stdlib.h>
@@ -39,6 +43,7 @@ static ErlDrvData ttysl_start(ErlDrvPort, char*);
#include <string.h>
#include <signal.h>
#include <fcntl.h>
+#include <limits.h>
#include <locale.h>
#include <unistd.h>
#include <termios.h>
@@ -57,6 +62,14 @@ static ErlDrvData ttysl_start(ErlDrvPort, char*);
#include <langinfo.h>
#endif
+#if defined IOV_MAX
+#define MAXIOV IOV_MAX
+#elif defined UIO_MAXIOV
+#define MAXIOV UIO_MAXIOV
+#else
+#define MAXIOV 16
+#endif
+
#define TRUE 1
#define FALSE 0
@@ -80,12 +93,15 @@ static volatile int cols_needs_update = FALSE;
#define OP_INSC 2
#define OP_DELC 3
#define OP_BEEP 4
+#define OP_PUTC_SYNC 5
/* Control op */
#define CTRL_OP_GET_WINSIZE 100
#define CTRL_OP_GET_UNICODE_STATE 101
#define CTRL_OP_SET_UNICODE_STATE 102
-
+/* We use 1024 as the buf size as that was the default buf size of FILE streams
+ on all platforms that I checked. */
+#define TTY_BUFFSIZE 1024
static int lbuf_size = BUFSIZ;
static Uint32 *lbuf; /* The current line buffer */
@@ -113,13 +129,19 @@ static int lpos; /* The current "cursor position" in the line buf
/* Main interface functions. */
static void ttysl_stop(ErlDrvData);
static void ttysl_from_erlang(ErlDrvData, char*, ErlDrvSizeT);
+static void ttysl_to_tty(ErlDrvData, ErlDrvEvent);
+static void ttysl_flush_tty(ErlDrvData);
static void ttysl_from_tty(ErlDrvData, ErlDrvEvent);
static void ttysl_stop_select(ErlDrvEvent, void*);
static Sint16 get_sint16(char*);
static ErlDrvPort ttysl_port;
static int ttysl_fd;
-static FILE *ttysl_out;
+static int ttysl_terminate = 0;
+static int ttysl_send_ok = 0;
+static ErlDrvBinary *putcbuf;
+static int putcpos;
+static int putclen;
/* Functions that work on the line buffer. */
static int start_lbuf(void);
@@ -201,22 +223,22 @@ struct erl_drv_entry ttsl_driver_entry = {
IF_IMPL(ttysl_stop),
IF_IMPL(ttysl_from_erlang),
IF_IMPL(ttysl_from_tty),
- NULL,
- "tty_sl",
- NULL,
- NULL,
+ IF_IMPL(ttysl_to_tty),
+ "tty_sl", /* driver_name */
+ NULL, /* finish */
+ NULL, /* handle */
IF_IMPL(ttysl_control),
NULL, /* timeout */
NULL, /* outputv */
NULL, /* ready_async */
- NULL, /* flush */
+ IF_IMPL(ttysl_flush_tty),
NULL, /* call */
NULL, /* event */
ERL_DRV_EXTENDED_MARKER,
ERL_DRV_EXTENDED_MAJOR_VERSION,
ERL_DRV_EXTENDED_MINOR_VERSION,
0, /* ERL_DRV_FLAGs */
- NULL,
+ NULL, /* handle2 */
NULL, /* process_exit */
IF_IMPL(ttysl_stop_select)
};
@@ -296,8 +318,7 @@ static ErlDrvData ttysl_start(ErlDrvPort port, char* buf)
return ERL_DRV_ERROR_GENERAL;
}
- /* Open the terminal and set the terminal */
- ttysl_out = fdopen(ttysl_fd, "w");
+ SET_NONBLOCKING(ttysl_fd);
#ifdef PRIMITIVE_UTF8_CHECK
setlocale(LC_CTYPE, ""); /* Set international environment,
@@ -400,12 +421,14 @@ static void ttysl_stop(ErlDrvData ttysl_data)
stop_lbuf();
stop_termcap();
tty_reset(ttysl_fd);
- driver_select(ttysl_port, (ErlDrvEvent)(UWord)ttysl_fd, ERL_DRV_READ|ERL_DRV_USE, 0);
+ driver_select(ttysl_port, (ErlDrvEvent)(UWord)ttysl_fd,
+ ERL_DRV_WRITE|ERL_DRV_READ|ERL_DRV_USE, 0);
sys_sigset(SIGCONT, SIG_DFL);
sys_sigset(SIGWINCH, SIG_DFL);
}
ttysl_port = (ErlDrvPort)-1;
ttysl_fd = -1;
+ ttysl_terminate = 0;
/* return TRUE; */
}
@@ -650,10 +673,26 @@ static int check_buf_size(byte *s, int n)
static void ttysl_from_erlang(ErlDrvData ttysl_data, char* buf, ErlDrvSizeT count)
{
+ ErlDrvSizeT sz;
+
+ sz = driver_sizeq(ttysl_port);
+
+ putclen = count > TTY_BUFFSIZE ? TTY_BUFFSIZE : count;
+ putcbuf = driver_alloc_binary(putclen);
+ putcpos = 0;
+
if (lpos > MAXSIZE)
put_chars((byte*)"\n", 1);
switch (buf[0]) {
+ case OP_PUTC_SYNC:
+ /* Using sync means that we have to send an ok to the
+ controlling process for each command call. We delay
+ sending ok if the driver queue exceeds a certain size.
+ We do not set ourselves as a busy port, as this
+ could be very bad for user_drv, if it gets blocked on
+ the port_command. */
+ /* fall through */
case OP_PUTC:
DEBUGLOG(("OP: Putc(%lu)",(unsigned long) count-1));
if (check_buf_size((byte*)buf+1, count-1) == 0)
@@ -678,10 +717,104 @@ static void ttysl_from_erlang(ErlDrvData ttysl_data, char* buf, ErlDrvSizeT coun
/* Unknown op, just ignore. */
break;
}
- fflush(ttysl_out);
+
+ driver_enq_bin(ttysl_port,putcbuf,0,putcpos);
+
+ if (sz == 0) {
+ for (;;) {
+ int written, qlen;
+ SysIOVec *iov;
+
+ iov = driver_peekq(ttysl_port,&qlen);
+ if (iov)
+ written = writev(ttysl_fd, iov, qlen > MAXIOV ? MAXIOV : qlen);
+ else
+ written = 0;
+ if (written < 0) {
+ if (errno == EAGAIN) {
+ driver_select(ttysl_port,(ErlDrvEvent)(long)ttysl_fd,
+ ERL_DRV_USE|ERL_DRV_WRITE,1);
+ break;
+ } else {
+ /* we ignore all other errors */
+ break;
+ }
+ } else {
+ if (driver_deq(ttysl_port, written) == 0)
+ break;
+ }
+ }
+ }
+
+ if (buf[0] == OP_PUTC_SYNC) {
+ if (driver_sizeq(ttysl_port) > TTY_BUFFSIZE && !ttysl_terminate) {
+ /* We delay sending the ack until the buffer has been consumed */
+ ttysl_send_ok = 1;
+ } else {
+ ErlDrvTermData spec[] = {
+ ERL_DRV_PORT, driver_mk_port(ttysl_port),
+ ERL_DRV_ATOM, driver_mk_atom("ok"),
+ ERL_DRV_TUPLE, 2
+ };
+ ASSERT(ttysl_send_ok == 0);
+ erl_drv_output_term(driver_mk_port(ttysl_port), spec,
+ sizeof(spec) / sizeof(spec[0]));
+ }
+ }
+
return; /* TRUE; */
}
+static void ttysl_to_tty(ErlDrvData ttysl_data, ErlDrvEvent fd) {
+ for (;;) {
+ int written, qlen;
+ SysIOVec *iov;
+ ErlDrvSizeT sz;
+
+ iov = driver_peekq(ttysl_port,&qlen);
+ if (iov)
+ written = writev(ttysl_fd, iov, qlen > MAXIOV ? MAXIOV : qlen);
+ else
+ written = 0;
+ if (written < 0) {
+ if (errno == EAGAIN) {
+ break;
+ } else {
+ /* we ignore all other errors */
+ }
+ } else {
+ sz = driver_deq(ttysl_port, written);
+ if (sz < TTY_BUFFSIZE && ttysl_send_ok) {
+ ErlDrvTermData spec[] = {
+ ERL_DRV_PORT, driver_mk_port(ttysl_port),
+ ERL_DRV_ATOM, driver_mk_atom("ok"),
+ ERL_DRV_TUPLE, 2
+ };
+ ttysl_send_ok = 0;
+ erl_drv_output_term(driver_mk_port(ttysl_port), spec,
+ sizeof(spec) / sizeof(spec[0]));
+ }
+ if (sz == 0) {
+ driver_select(ttysl_port,(ErlDrvEvent)(long)ttysl_fd,
+ ERL_DRV_WRITE,0);
+ if (ttysl_terminate)
+ /* flush has been called, which means we should terminate
+ when queue is empty. This will not send any exit
+ message */
+ driver_failure_atom(ttysl_port, "normal");
+ break;
+ }
+ }
+ }
+
+ return;
+}
+
+static void ttysl_flush_tty(ErlDrvData ttysl_data) {
+ ttysl_terminate = 1;
+ return;
+}
+
static void ttysl_from_tty(ErlDrvData ttysl_data, ErlDrvEvent fd)
{
byte b[1024];
@@ -1070,7 +1203,14 @@ static int write_buf(Uint32 *s, int n)
/* The basic procedure for outputting one character. */
static int outc(int c)
{
- return (int)putc(c, ttysl_out);
+ putcbuf->orig_bytes[putcpos++] = c;
+ if (putcpos == putclen) {
+ driver_enq_bin(ttysl_port,putcbuf,0,putclen);
+ putcpos = 0;
+ putclen = TTY_BUFFSIZE;
+ putcbuf = driver_alloc_binary(BUFSIZ);
+ }
+ return 1;
}
static int move_cursor(int from, int to)
diff --git a/erts/emulator/drivers/win32/ttsl_drv.c b/erts/emulator/drivers/win32/ttsl_drv.c
index 502cb58dfa..851c336a11 100644
--- a/erts/emulator/drivers/win32/ttsl_drv.c
+++ b/erts/emulator/drivers/win32/ttsl_drv.c
@@ -46,6 +46,7 @@ static int rows; /* Number of rows available. */
#define OP_INSC 2
#define OP_DELC 3
#define OP_BEEP 4
+#define OP_PUTC_SYNC 5
/* Control op */
#define CTRL_OP_GET_WINSIZE 100
@@ -458,6 +459,7 @@ static void ttysl_from_erlang(ErlDrvData ttysl_data, char* buf, ErlDrvSizeT coun
switch (buf[0]) {
case OP_PUTC:
+ case OP_PUTC_SYNC:
DEBUGLOG(("OP: Putc(%I64u)",(unsigned long long)count-1));
if (check_buf_size((byte*)buf+1, count-1) == 0)
return;
@@ -481,6 +483,20 @@ static void ttysl_from_erlang(ErlDrvData ttysl_data, char* buf, ErlDrvSizeT coun
/* Unknown op, just ignore. */
break;
}
+
+ if (buf[0] == OP_PUTC_SYNC) {
+ /* On windows we do a blocking write to the tty so we just
+ send the ack immidiately. If at some point in the future
+ someone has a problem with tty output being blocking
+ this has to be changed. */
+ ErlDrvTermData spec[] = {
+ ERL_DRV_PORT, driver_mk_port(ttysl_port),
+ ERL_DRV_ATOM, driver_mk_atom("ok"),
+ ERL_DRV_TUPLE, 2
+ };
+ erl_drv_output_term(driver_mk_port(ttysl_port), spec,
+ sizeof(spec) / sizeof(spec[0]));
+ }
return;
}
diff --git a/erts/emulator/sys/unix/sys.c b/erts/emulator/sys/unix/sys.c
index 0d677d5f34..5de0c281c4 100644
--- a/erts/emulator/sys/unix/sys.c
+++ b/erts/emulator/sys/unix/sys.c
@@ -34,6 +34,7 @@
#include <termios.h>
#include <ctype.h>
#include <sys/utsname.h>
+#include <sys/select.h>
#ifdef ISC32
#include <sys/bsdtypes.h>
@@ -91,8 +92,10 @@ static erts_smp_rwmtx_t environ_rwmtx;
# else
# define CHLDWTHR 0
# endif
+# define FDBLOCK 1
#else
# define CHLDWTHR 0
+# define FDBLOCK 0
#endif
/*
* [OTP-3906]
@@ -121,6 +124,15 @@ struct ErtsSysReportExit_ {
#endif
};
+/* Used by the fd driver iff the fd could not be set to non-blocking */
+typedef struct ErtsSysBlocking_ {
+ ErlDrvPDL pdl;
+ int res;
+ int err;
+ unsigned int pkey;
+} ErtsSysBlocking;
+
+
/* This data is shared by these drivers - initialized by spawn_init() */
static struct driver_data {
ErlDrvPort port_num;
@@ -129,6 +141,8 @@ static struct driver_data {
int pid;
int alive;
int status;
+ int terminating;
+ ErtsSysBlocking *blocking;
} *driver_data; /* indexed by fd */
static ErtsSysReportExit *report_exit_list;
@@ -1108,11 +1122,16 @@ void fini_getenv_state(GETENV_STATE *state)
/* Driver interfaces */
static ErlDrvData spawn_start(ErlDrvPort, char*, SysDriverOpts*);
static ErlDrvData fd_start(ErlDrvPort, char*, SysDriverOpts*);
+#if FDBLOCK
+static void fd_async(void *);
+static void fd_ready_async(ErlDrvData drv_data, ErlDrvThreadData thread_data);
+#endif
static ErlDrvSSizeT fd_control(ErlDrvData, unsigned int, char *, ErlDrvSizeT,
char **, ErlDrvSizeT);
static ErlDrvData vanilla_start(ErlDrvPort, char*, SysDriverOpts*);
static int spawn_init(void);
static void fd_stop(ErlDrvData);
+static void fd_flush(ErlDrvData);
static void stop(ErlDrvData);
static void ready_input(ErlDrvData, ErlDrvEvent);
static void ready_output(ErlDrvData, ErlDrvEvent);
@@ -1157,8 +1176,12 @@ struct erl_drv_entry fd_driver_entry = {
fd_control,
NULL,
outputv,
- NULL, /* ready_async */
- NULL, /* flush */
+#if FDBLOCK
+ fd_ready_async, /* ready_async */
+#else
+ NULL,
+#endif
+ fd_flush, /* flush */
NULL, /* call */
NULL, /* event */
ERL_DRV_EXTENDED_MARKER,
@@ -1212,13 +1235,28 @@ static RETSIGTYPE onchld(int signum)
#endif
}
+static int set_blocking_data(struct driver_data *dd) {
+
+ dd->blocking = erts_alloc(ERTS_ALC_T_SYS_BLOCKING, sizeof(ErtsSysBlocking));
+
+ erts_smp_atomic_add_nob(&sys_misc_mem_sz, sizeof(ErtsSysBlocking));
+
+ dd->blocking->pdl = driver_pdl_create(dd->port_num);
+ dd->blocking->res = 0;
+ dd->blocking->err = 0;
+ dd->blocking->pkey = driver_async_port_key(dd->port_num);
+
+ return 1;
+}
+
static int set_driver_data(ErlDrvPort port_num,
int ifd,
int ofd,
int packet_bytes,
int read_write,
int exit_status,
- int pid)
+ int pid,
+ int is_blocking)
{
Port *prt;
ErtsSysReportExit *report_exit;
@@ -1250,8 +1288,13 @@ static int set_driver_data(ErlDrvPort port_num,
driver_data[ifd].pid = pid;
driver_data[ifd].alive = 1;
driver_data[ifd].status = 0;
+ driver_data[ifd].terminating = 0;
+ driver_data[ifd].blocking = NULL;
if (read_write & DO_WRITE) {
driver_data[ifd].ofd = ofd;
+ if (is_blocking && FDBLOCK)
+ if (!set_blocking_data(driver_data+ifd))
+ return -1;
if (ifd != ofd)
driver_data[ofd] = driver_data[ifd]; /* structure copy */
} else { /* DO_READ only */
@@ -1267,6 +1310,11 @@ static int set_driver_data(ErlDrvPort port_num,
driver_data[ofd].pid = pid;
driver_data[ofd].alive = 1;
driver_data[ofd].status = 0;
+ driver_data[ofd].terminating = 0;
+ driver_data[ofd].blocking = NULL;
+ if (is_blocking && FDBLOCK)
+ if (!set_blocking_data(driver_data+ofd))
+ return -1;
return(ofd);
}
}
@@ -1276,6 +1324,7 @@ static int spawn_init()
int i;
#if CHLDWTHR
erts_thr_opts_t thr_opts = ERTS_THR_OPTS_DEFAULT_INITER;
+
thr_opts.detached = 0;
thr_opts.suggested_stack_size = 0; /* Smallest possible */
#endif
@@ -1755,7 +1804,7 @@ static ErlDrvData spawn_start(ErlDrvPort port_num, char* name, SysDriverOpts* op
}
res = set_driver_data(port_num, ifd[0], ofd[1], opts->packet_bytes,
- opts->read_write, opts->exit_status, pid);
+ opts->read_write, opts->exit_status, pid, 0);
/* Don't unblock SIGCHLD until now, since the call above must
first complete putting away the info about our new subprocess. */
unblock_signals();
@@ -1840,6 +1889,7 @@ static ErlDrvData fd_start(ErlDrvPort port_num, char* name,
SysDriverOpts* opts)
{
ErlDrvData res;
+ int non_blocking = 0;
if (((opts->read_write & DO_READ) && opts->ifd >= max_files) ||
((opts->read_write & DO_WRITE) && opts->ofd >= max_files))
@@ -1912,6 +1962,20 @@ static ErlDrvData fd_start(ErlDrvPort port_num, char* name,
* case - it can be called with any old pre-existing file descriptors,
* the relations between which (if they're even two) we can only guess
* at - still, we try our best...
+ *
+ * Added note OTP 18: Some systems seem to use stdout/stderr to log data
+ * using unix pipes, so we cannot allow the system to block on a write.
+ * Therefore we use an async thread to write the data to fd's that could
+ * not be set to non-blocking. When no async threads are available we
+ * fall back on the old behaviour.
+ *
+ * Also the guarantee about what is delivered to the OS has changed.
+ * Pre 18 the fd driver did no flushing of data before terminating.
+ * Now it does. This is because we want to be able to guarantee that things
+ * such as escripts and friends really have outputted all data before
+ * terminating. This could potentially block the termination of the system
+ * for a very long time, but if the user wants to terminate fast she should
+ * use erlang:halt with flush=false.
*/
if (opts->read_write & DO_READ) {
@@ -1934,6 +1998,7 @@ static ErlDrvData fd_start(ErlDrvPort port_num, char* name,
imagine a scenario where setting non-blocking mode
here would cause problems - go ahead and do it. */
+ non_blocking = 1;
SET_NONBLOCKING(opts->ofd);
} else { /* output fd is a tty, input fd isn't */
@@ -1976,6 +2041,7 @@ static ErlDrvData fd_start(ErlDrvPort port_num, char* name,
(nfd = open(tty, O_WRONLY)) != -1) {
dup2(nfd, opts->ofd);
close(nfd);
+ non_blocking = 1;
SET_NONBLOCKING(opts->ofd);
}
}
@@ -1984,8 +2050,9 @@ static ErlDrvData fd_start(ErlDrvPort port_num, char* name,
}
CHLD_STAT_LOCK;
res = (ErlDrvData)(long)set_driver_data(port_num, opts->ifd, opts->ofd,
- opts->packet_bytes,
- opts->read_write, 0, -1);
+ opts->packet_bytes,
+ opts->read_write, 0, -1,
+ !non_blocking);
CHLD_STAT_UNLOCK;
return res;
}
@@ -2011,14 +2078,30 @@ static void nbio_stop_fd(ErlDrvPort prt, int fd)
SET_BLOCKING(fd);
}
-static void fd_stop(ErlDrvData fd) /* Does not close the fds */
+static void fd_stop(ErlDrvData ev) /* Does not close the fds */
{
int ofd;
+ int fd = (int)(long)ev;
+ ErlDrvPort prt = driver_data[fd].port_num;
- nbio_stop_fd(driver_data[(int)(long)fd].port_num, (int)(long)fd);
- ofd = driver_data[(int)(long)fd].ofd;
- if (ofd != (int)(long)fd && ofd != -1)
- nbio_stop_fd(driver_data[(int)(long)fd].port_num, (int)(long)ofd);
+#if FDBLOCK
+ if (driver_data[fd].blocking) {
+ erts_free(ERTS_ALC_T_SYS_BLOCKING,driver_data[fd].blocking);
+ driver_data[fd].blocking = NULL;
+ erts_smp_atomic_add_nob(&sys_misc_mem_sz, -1*sizeof(ErtsSysBlocking));
+ }
+#endif
+
+ nbio_stop_fd(prt, fd);
+ ofd = driver_data[fd].ofd;
+ if (ofd != fd && ofd != -1)
+ nbio_stop_fd(prt, ofd);
+}
+
+static void fd_flush(ErlDrvData fd)
+{
+ if (!driver_data[(int)(long)fd].terminating)
+ driver_data[(int)(long)fd].terminating = 1;
}
static ErlDrvData vanilla_start(ErlDrvPort port_num, char* name,
@@ -2041,8 +2124,8 @@ static ErlDrvData vanilla_start(ErlDrvPort port_num, char* name,
CHLD_STAT_LOCK;
res = (ErlDrvData)(long)set_driver_data(port_num, fd, fd,
- opts->packet_bytes,
- opts->read_write, 0, -1);
+ opts->packet_bytes,
+ opts->read_write, 0, -1, 0);
CHLD_STAT_UNLOCK;
return res;
}
@@ -2079,6 +2162,7 @@ static void stop(ErlDrvData fd)
}
}
+/* used by fd_driver */
static void outputv(ErlDrvData e, ErlIOVec* ev)
{
int fd = (int)(long)e;
@@ -2104,12 +2188,21 @@ static void outputv(ErlDrvData e, ErlIOVec* ev)
ev->iov[0].iov_base = lbp;
ev->iov[0].iov_len = pb;
ev->size += pb;
+
+ if (driver_data[fd].blocking && FDBLOCK)
+ driver_pdl_lock(driver_data[fd].blocking->pdl);
+
if ((sz = driver_sizeq(ix)) > 0) {
driver_enqv(ix, ev, 0);
+
+ if (driver_data[fd].blocking && FDBLOCK)
+ driver_pdl_unlock(driver_data[fd].blocking->pdl);
+
if (sz + ev->size >= (1 << 13))
set_busy_port(ix, 1);
}
- else {
+ else if (!driver_data[fd].blocking || !FDBLOCK) {
+ /* We try to write directly if the fd in non-blocking */
int vsize = ev->vsize > MAX_VSIZE ? MAX_VSIZE : ev->vsize;
n = writev(ofd, (const void *) (ev->iov), vsize);
@@ -2125,10 +2218,22 @@ static void outputv(ErlDrvData e, ErlIOVec* ev)
driver_enqv(ix, ev, n); /* n is the skip value */
driver_select(ix, ofd, ERL_DRV_WRITE|ERL_DRV_USE, 1);
}
+#if FDBLOCK
+ else {
+ if (ev->size != 0) {
+ driver_enqv(ix, ev, 0);
+ driver_pdl_unlock(driver_data[fd].blocking->pdl);
+ driver_async(ix, &driver_data[fd].blocking->pkey,
+ fd_async, driver_data+fd, NULL);
+ } else {
+ driver_pdl_unlock(driver_data[fd].blocking->pdl);
+ }
+ }
+#endif
/* return 0;*/
}
-
+/* Used by spawn_driver and vanilla driver */
static void output(ErlDrvData e, char* buf, ErlDrvSizeT len)
{
int fd = (int)(long)e;
@@ -2191,6 +2296,23 @@ static int port_inp_failure(ErlDrvPort port_num, int ready_fd, int res)
ASSERT(res <= 0);
(void) driver_select(port_num, ready_fd, ERL_DRV_READ|ERL_DRV_WRITE, 0);
clear_fd_data(ready_fd);
+
+ if (driver_data[ready_fd].blocking && FDBLOCK) {
+ driver_pdl_lock(driver_data[ready_fd].blocking->pdl);
+ if (driver_sizeq(driver_data[ready_fd].port_num) > 0) {
+ driver_pdl_unlock(driver_data[ready_fd].blocking->pdl);
+ /* We have stuff in the output queue, so we just
+ set the state to terminating and wait for fd_async_ready
+ to terminate the port */
+ if (res == 0)
+ driver_data[ready_fd].terminating = 2;
+ else
+ driver_data[ready_fd].terminating = -err;
+ return 0;
+ }
+ driver_pdl_unlock(driver_data[ready_fd].blocking->pdl);
+ }
+
if (res == 0) {
if (driver_data[ready_fd].report_exit) {
CHLD_STAT_LOCK;
@@ -2241,6 +2363,7 @@ static void ready_input(ErlDrvData e, ErlDrvEvent ready_fd)
port_num = driver_data[fd].port_num;
packet_bytes = driver_data[fd].packet_bytes;
+
if (packet_bytes == 0) {
byte *read_buf = (byte *) erts_alloc(ERTS_ALC_T_SYS_READ_BUF,
ERTS_SYS_READ_BUF_SZ);
@@ -2364,6 +2487,8 @@ static void ready_output(ErlDrvData e, ErlDrvEvent ready_fd)
if ((iv = (struct iovec*) driver_peekq(ix, &vsize)) == NULL) {
driver_select(ix, ready_fd, ERL_DRV_WRITE, 0);
+ if (driver_data[fd].terminating)
+ driver_failure_atom(driver_data[fd].port_num,"normal");
return; /* 0; */
}
vsize = vsize > MAX_VSIZE ? MAX_VSIZE : vsize;
@@ -2389,6 +2514,82 @@ static void stop_select(ErlDrvEvent fd, void* _)
close((int)fd);
}
+#if FDBLOCK
+
+static void
+fd_async(void *async_data)
+{
+ int res;
+ struct driver_data *dd = (struct driver_data*)async_data;
+ SysIOVec *iov0;
+ SysIOVec *iov;
+ int iovlen;
+ int iovcnt;
+ int p;
+ /* much of this code is stolen from efile_drv:invoke_writev */
+ driver_pdl_lock(dd->blocking->pdl);
+ iov0 = driver_peekq(dd->port_num, &iovlen);
+ /* Calculate iovcnt */
+ for (p = 0, iovcnt = 0; iovcnt < iovlen;
+ p += iov0[iovcnt++].iov_len)
+ ;
+ iov = erts_alloc_fnf(ERTS_ALC_T_SYS_WRITE_BUF,
+ sizeof(SysIOVec)*iovcnt);
+ if (!iov) {
+ res = -1;
+ errno = ENOMEM;
+ erts_free(ERTS_ALC_T_SYS_WRITE_BUF, iov);
+ driver_pdl_unlock(dd->blocking->pdl);
+ } else {
+ memcpy(iov,iov0,iovcnt*sizeof(SysIOVec));
+ driver_pdl_unlock(dd->blocking->pdl);
+
+ res = writev(dd->ofd, iov, iovlen);
+
+ erts_free(ERTS_ALC_T_SYS_WRITE_BUF, iov);
+ }
+ dd->blocking->res = res;
+ dd->blocking->err = errno;
+}
+
+void fd_ready_async(ErlDrvData drv_data,
+ ErlDrvThreadData thread_data) {
+ struct driver_data *dd = (struct driver_data *)thread_data;
+ ErlDrvPort port_num = dd->port_num;
+
+ ASSERT(dd->blocking);
+ ASSERT(dd == (driver_data + (int)(long)drv_data));
+
+ if (dd->blocking->res > 0) {
+ driver_pdl_lock(dd->blocking->pdl);
+ if (driver_deq(port_num, dd->blocking->res) == 0) {
+ driver_pdl_unlock(dd->blocking->pdl);
+ set_busy_port(port_num, 0);
+ if (dd->terminating) {
+ /* The port is has been ordered to terminate
+ from either fd_flush or port_inp_failure */
+ if (dd->terminating == 1)
+ driver_failure_atom(port_num, "normal");
+ else if (dd->terminating == 2)
+ driver_failure_eof(port_num);
+ else if (dd->terminating < 0)
+ driver_failure_posix(port_num, -dd->terminating);
+ return; /* -1; */
+ }
+ } else {
+ driver_pdl_unlock(dd->blocking->pdl);
+ /* still data left to write in queue */
+ driver_async(port_num, &dd->blocking->pkey, fd_async, dd, NULL);
+ return /* 0; */;
+ }
+ } else if (dd->blocking->res < 0) {
+ driver_failure_posix(port_num, dd->blocking->err);
+ return; /* -1; */
+ }
+ return; /* 0; */
+}
+
+#endif
void erts_do_break_handling(void)
{
@@ -2658,18 +2859,30 @@ void sys_preload_end(Preload* p)
/* Nothing */
}
-/* Read a key from console (?) */
-
+/* Read a key from console, used by break.c
+ Here we assume that all schedulers are stopped so that erl_poll
+ does not interfere with the select below.
+*/
int sys_get_key(fd)
int fd;
{
- int c;
+ int c, ret;
unsigned char rbuf[64];
+ fd_set fds;
fflush(stdout); /* Flush query ??? */
- if ((c = read(fd,rbuf,64)) <= 0) {
- return c;
+ FD_ZERO(&fds);
+ FD_SET(fd,&fds);
+
+ ret = select(fd+1, &fds, NULL, NULL, NULL);
+
+ if (ret == 1) {
+ do {
+ c = read(fd,rbuf,64);
+ } while (c < 0 && errno == EAGAIN);
+ if (c <= 0)
+ return c;
}
return rbuf[0];
diff --git a/erts/emulator/test/port_SUITE.erl b/erts/emulator/test/port_SUITE.erl
index 738d60b8a4..1bb4cb3637 100644
--- a/erts/emulator/test/port_SUITE.erl
+++ b/erts/emulator/test/port_SUITE.erl
@@ -90,6 +90,7 @@
mix_up_ports/1, otp_5112/1, otp_5119/1, otp_6224/1,
exit_status_multi_scheduling_block/1, ports/1,
spawn_driver/1, spawn_executable/1, close_deaf_port/1,
+ port_setget_data/1,
unregister_name/1, parallelism_option/1]).
-export([do_iter_max_ports/2]).
@@ -115,6 +116,7 @@ all() ->
mix_up_ports, otp_5112, otp_5119,
exit_status_multi_scheduling_block, ports, spawn_driver,
spawn_executable, close_deaf_port, unregister_name,
+ port_setget_data,
parallelism_option].
groups() ->
@@ -2339,6 +2341,55 @@ close_deaf_port_1(N, Cmd) ->
{comment, "Could not spawn more than " ++ integer_to_list(N) ++ " OS processes."}
end.
+%% Test undocumented port_set_data/2 and port_get_data/1
+%% Hammer from multiple processes a while
+%% and then abrubtly close the port (OTP-12208).
+port_setget_data(Config) when is_list(Config) ->
+ ok = load_driver(?config(data_dir, Config), "echo_drv"),
+ Port = erlang:open_port({spawn_driver, "echo_drv"}, []),
+
+ NSched = erlang:system_info(schedulers_online),
+ PRs = lists:map(fun(I) ->
+ spawn_opt(fun() -> port_setget_data_hammer(Port,1) end,
+ [monitor, {scheduler, I rem NSched}])
+ end,
+ lists:seq(1,10)),
+ receive after 100 -> ok end,
+ Papa = self(),
+ lists:foreach(fun({Pid,_}) -> Pid ! {Papa,prepare_for_close} end, PRs),
+ lists:foreach(fun({Pid,_}) ->
+ receive {Pid,prepare_for_close} -> ok end
+ end,
+ PRs),
+ port_close(Port),
+ lists:foreach(fun({Pid,Ref}) ->
+ receive {'DOWN', Ref, process, Pid, normal} -> ok end
+ end,
+ PRs),
+ ok.
+
+port_setget_data_hammer(Port, N) ->
+ Rand = random:uniform(3),
+ try case Rand of
+ 1 -> true = erlang:port_set_data(Port, atom);
+ 2 -> true = erlang:port_set_data(Port, {1,2,3});
+ 3 -> erlang:port_get_data(Port)
+ end
+ catch
+ error:badarg ->
+ true = get(prepare_for_close),
+ io:format("~p did ~p rounds before port closed\n", [self(), N]),
+ exit(normal)
+ end,
+ receive {Papa, prepare_for_close} ->
+ put(prepare_for_close, true),
+ Papa ! {self(),prepare_for_close}
+ after 0 ->
+ ok
+ end,
+ port_setget_data_hammer(Port, N+1).
+
+
wait_until(Fun) ->
case catch Fun() of
true ->
diff --git a/erts/etc/unix/etp-commands.in b/erts/etc/unix/etp-commands.in
index ee27770e51..1a723ad936 100644
--- a/erts/etc/unix/etp-commands.in
+++ b/erts/etc/unix/etp-commands.in
@@ -3561,6 +3561,39 @@ document etp-carrier-blocks
%---------------------------------------------------------------------------
end
+define etp-address-to-beam-opcode
+ set $etp_i = 0
+ set $etp_min_diff = ((UWord)1 << (sizeof(UWord)*8 - 1))
+ set $etp_min_opcode = -1
+ set $etp_addr = (UWord) ($arg0)
+
+ while $etp_i < num_instructions && $etp_min_diff > 0
+ if ($etp_addr - (UWord)beam_ops[$etp_i]) < $etp_min_diff
+ set $etp_min_diff = $etp_addr - (UWord)beam_ops[$etp_i]
+ set $etp_min_opcode = $etp_i
+ end
+ set $etp_i = $etp_i + 1
+ end
+ if $etp_min_diff == 0
+ printf "Address %p is start of '%s'\n", $etp_addr, opc[$etp_min_opcode].name
+ else
+ if $etp_min_opcode >= 0
+ printf "Address is %ld bytes into opcode '%s' at %p\n", $etp_min_diff, opc[$etp_min_opcode].name, beam_ops[$etp_min_opcode]
+ else
+ printf "Invalid opcode address\n"
+ end
+ end
+end
+
+document etp-address-to-beam-opcode
+%---------------------------------------------------------------------------
+% Get beam opcode from a native instruction address (within process_main())
+% Arg: Instructon pointer value
+%
+% Does not work with NO_JUMP_TABLE
+%---------------------------------------------------------------------------
+end
+
############################################################################
# Toolbox parameter handling
diff --git a/erts/etc/win32/Install.c b/erts/etc/win32/Install.c
index 500fd166f8..9d85d642ab 100644
--- a/erts/etc/win32/Install.c
+++ b/erts/etc/win32/Install.c
@@ -80,7 +80,7 @@ int wmain(int argc, wchar_t **argv)
}
}
if (root == NULL) {
- if (module = NULL) {
+ if (module == NULL) {
fprintf(stderr, "Cannot GetModuleHandle()\n");
exit(1);
}
diff --git a/erts/etc/win32/erl.c b/erts/etc/win32/erl.c
index 1d116bf36e..772b668586 100644
--- a/erts/etc/win32/erl.c
+++ b/erts/etc/win32/erl.c
@@ -264,7 +264,7 @@ static void get_parameters(void)
int len;
- if (module = NULL) {
+ if (module == NULL) {
error("Cannot GetModuleHandle()");
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-29 05:22:32 +0000