diff options
Diffstat (limited to 'lib/common_test/test/ct_hooks_SUITE_data')
3 files changed, 33 insertions, 43 deletions
diff --git a/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/ct_scope_per_tc_cth_SUITE.erl b/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/ct_scope_per_tc_cth_SUITE.erl index d400348354..404fb33476 100644 --- a/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/ct_scope_per_tc_cth_SUITE.erl +++ b/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/ct_scope_per_tc_cth_SUITE.erl @@ -1,7 +1,7 @@ %%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 2010-2016. All Rights Reserved.
+%% Copyright Ericsson AB 2010-2018. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -29,7 +29,6 @@ %% Test server callback functions
%%--------------------------------------------------------------------
-%% @doc
%% Config - [tuple()]
%% A list of key/value pairs, holding the test case configuration.
%%
@@ -38,27 +37,23 @@ %% Note: This function is free to add any key/value pairs to the Config
%% variable, but should NOT alter/remove any existing entries.
%%
-%% @spec init_per_suite(Config) -> Config
-%% @end
+%% -spec init_per_suite(Config) -> Config
%%--------------------------------------------------------------------
init_per_suite(Config) ->
Config.
%%--------------------------------------------------------------------
-%% @doc
%% Config - [tuple()]
%% A list of key/value pairs, holding the test case configuration.
%%
%% Cleanup after the whole suite
%%
-%% @spec end_per_suite(Config) -> _
-%% @end
+%% -spec end_per_suite(Config) -> _
%%--------------------------------------------------------------------
end_per_suite(_Config) ->
ok.
%%--------------------------------------------------------------------
-%% @doc
%% Case - atom()
%% Name of the test case that is about to be run.
%% Config - [tuple()]
@@ -70,14 +65,12 @@ end_per_suite(_Config) -> %% variable, but should NOT alter/remove any existing entries.
%% Initiation before each test case
%%
-%% @spec init_per_testcase(TestCase, Config) -> Config
-%% @end
+%% -spec init_per_testcase(TestCase, Config) -> Config
%%--------------------------------------------------------------------
init_per_testcase(_TestCase, Config) ->
[{ct_hooks,[empty_cth]}|Config].
%%--------------------------------------------------------------------
-%% @doc
%% Case - atom()
%% Name of the test case that is about to be run.
%% Config - [tuple()]
@@ -85,22 +78,19 @@ init_per_testcase(_TestCase, Config) -> %%
%% Cleanup after each test case
%%
-%% @spec end_per_testcase(TestCase, Config) -> _
-%% @end
+%% -spec end_per_testcase(TestCase, Config) -> _
%%--------------------------------------------------------------------
end_per_testcase(_TestCase, _Config) ->
ok.
%%--------------------------------------------------------------------
-%% @doc
%% TestCases - [Case]
%% Case - atom()
%% Name of a test case.
%%
%% Returns a list of all test cases in this test suite
%%
-%% @spec all() -> TestCases
-%% @end
+%% -spec all() -> TestCases
%%--------------------------------------------------------------------
all() ->
[test_case].
diff --git a/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/cth_log_SUITE.erl b/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/cth_log_SUITE.erl index bd1ac54781..eda190b682 100644 --- a/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/cth_log_SUITE.erl +++ b/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/cth_log_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2018. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -124,6 +124,6 @@ gen() -> gen_loop(N) -> ct:log("Logger iteration: ~p", [N]), error_logger:error_report(N), - error_logger:info_report(progress, N), + error_logger:info_report(N), ct:sleep(150), gen_loop(N+1). diff --git a/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl b/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl index 324f1dc80a..60488e84c6 100644 --- a/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl +++ b/lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2017. All Rights Reserved. +%% Copyright Ericsson AB 2010-2018. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -18,9 +18,9 @@ %% %CopyrightEnd% %% -%%% @doc Common Test Example Suite Callback module. +%%% Common Test Example Suite Callback module. %%% -%%% <p>This module gives an example of a common test CTH (Common Test Hook). +%%% This module gives an example of a common test CTH (Common Test Hook). %%% There are many ways to add a CTH to a test run, you can do it either in %%% the command line using -ct_hook, in a test spec using %%% {ct_hook,M} or in the suite it self by returning ct_hook @@ -31,7 +31,7 @@ %%% it will be stopped after end_per_suite and so on. See terminate %%% documentation for a table describing the scoping machanics. %%% -%%% All of callbacks except init/1 in a CTH are optional.</p> +%%% All of callbacks except init/1 in a CTH are optional. -module(empty_cth). @@ -74,8 +74,8 @@ -record(state, { id = ?MODULE :: term()}). -%% @doc Called after groups/0. -%% you can change the return value in this function. +%% Called after groups/0. +%% You can change the return value in this function. -spec post_groups(Suite :: atom(), Groups :: list()) -> list(). post_groups(Suite,Groups) -> gen_event:notify( @@ -85,8 +85,8 @@ post_groups(Suite,Groups) -> ct:log("~w:post_groups(~w) called", [?MODULE,Suite]), Groups. -%% @doc Called after all/0. -%% you can change the return value in this function. +%% Called after all/0. +%% You can change the return value in this function. -spec post_all(Suite :: atom(), Tests :: list(), Groups :: term()) -> @@ -99,7 +99,7 @@ post_all(Suite,Tests,Groups) -> ct:log("~w:post_all(~w) called", [?MODULE,Suite]), Tests. -%% @doc Always called before any other callback function. Use this to initiate +%% Always called before any other callback function. Use this to initiate %% any common state. It should return an state for this CTH. -spec init(Id :: term(), Opts :: proplists:proplist()) -> {ok, State :: #state{}}. @@ -109,7 +109,7 @@ init(Id, Opts) -> ct:log("~w:init called", [?MODULE]), {ok,Opts}. -%% @doc The ID is used to uniquly identify an CTH instance, if two CTH's +%% The ID is used to uniquly identify an CTH instance, if two CTH's %% return the same ID the seconds CTH is ignored. This function should NOT %% have any side effects as it might be called multiple times by common test. -spec id(Opts :: proplists:proplist()) -> @@ -120,7 +120,7 @@ id(Opts) -> ct:log("~w:id called", [?MODULE]), ct_test_support:unique_timestamp(). -%% @doc Called before init_per_suite is called. Note that this callback is +%% Called before init_per_suite is called. Note that this callback is %% only called if the CTH is added before init_per_suite is run (eg. in a test %% specification, suite/0 function etc). %% You can change the config in the this function. @@ -136,7 +136,7 @@ pre_init_per_suite(Suite,Config,State) -> ct:log("~w:pre_init_per_suite(~w) called", [?MODULE,Suite]), {Config, State}. -%% @doc Called after init_per_suite. +%% Called after init_per_suite. %% you can change the return value in this function. -spec post_init_per_suite(Suite :: atom(), Config :: config(), @@ -151,7 +151,7 @@ post_init_per_suite(Suite,Config,Return,State) -> ct:log("~w:post_init_per_suite(~w) called", [?MODULE,Suite]), {Return, State}. -%% @doc Called before end_per_suite. The config/state can be changed here, +%% Called before end_per_suite. The config/state can be changed here, %% though it will only affect the *end_per_suite function. -spec pre_end_per_suite(Suite :: atom(), Config :: config() | skip_or_fail(), @@ -165,7 +165,7 @@ pre_end_per_suite(Suite,Config,State) -> ct:log("~w:pre_end_per_suite(~w) called", [?MODULE,Suite]), {Config, State}. -%% @doc Called after end_per_suite. Note that the config cannot be +%% Called after end_per_suite. Note that the config cannot be %% changed here, only the status of the suite. -spec post_end_per_suite(Suite :: atom(), Config :: config(), @@ -180,7 +180,7 @@ post_end_per_suite(Suite,Config,Return,State) -> ct:log("~w:post_end_per_suite(~w) called", [?MODULE,Suite]), {Return, State}. -%% @doc Called before each init_per_group. +%% Called before each init_per_group. %% You can change the config in this function. -spec pre_init_per_group(Suite :: atom(), Group :: atom(), @@ -195,7 +195,7 @@ pre_init_per_group(Suite,Group,Config,State) -> ct:log("~w:pre_init_per_group(~w,~w) called", [?MODULE,Suite,Group]), {Config, State}. -%% @doc Called after each init_per_group. +%% Called after each init_per_group. %% You can change the return value in this function. -spec post_init_per_group(Suite :: atom(), Group :: atom(), @@ -211,7 +211,7 @@ post_init_per_group(Suite,Group,Config,Return,State) -> ct:log("~w:post_init_per_group(~w,~w) called", [?MODULE,Suite,Group]), {Return, State}. -%% @doc Called after each end_per_group. The config/state can be changed here, +%% Called after each end_per_group. The config/state can be changed here, %% though it will only affect the *end_per_group functions. -spec pre_end_per_group(Suite :: atom(), Group :: atom(), @@ -226,7 +226,7 @@ pre_end_per_group(Suite,Group,Config,State) -> ct:log("~w:pre_end_per_group(~w~w) called", [?MODULE,Suite,Group]), {Config, State}. -%% @doc Called after each end_per_group. Note that the config cannot be +%% Called after each end_per_group. Note that the config cannot be %% changed here, only the status of the group. -spec post_end_per_group(Suite :: atom(), Group :: atom(), @@ -242,7 +242,7 @@ post_end_per_group(Suite,Group,Config,Return,State) -> ct:log("~w:post_end_per_group(~w,~w) called", [?MODULE,Suite,Group]), {Return, State}. -%% @doc Called before init_per_testcase/2 for each test case. +%% Called before init_per_testcase/2 for each test case. %% You can change the config in this function. -spec pre_init_per_testcase(Suite :: atom(), TC :: atom(), @@ -257,7 +257,7 @@ pre_init_per_testcase(Suite,TC,Config,State) -> ct:log("~w:pre_init_per_testcase(~w,~w) called", [?MODULE,Suite,TC]), {Config, State}. -%% @doc Called after init_per_testcase/2, and before the test case. +%% Called after init_per_testcase/2, and before the test case. -spec post_init_per_testcase(Suite :: atom(), TC :: atom(), Config :: config(), @@ -272,7 +272,7 @@ post_init_per_testcase(Suite,TC,Config,Return,State) -> ct:log("~w:post_init_per_testcase(~w,~w) called", [?MODULE,Suite,TC]), {Return, State}. -%% @doc Called before end_per_testacse/2. No skip or fail allowed here, +%% Called before end_per_testacse/2. No skip or fail allowed here, %% only config additions. -spec pre_end_per_testcase(Suite :: atom(), TC :: atom(), @@ -287,7 +287,7 @@ pre_end_per_testcase(Suite,TC,Config,State) -> ct:log("~w:pre_end_per_testcase(~w,~w) called", [?MODULE,Suite,TC]), {Config, State}. -%% @doc Called after end_per_testcase/2 for each test case. Note that +%% Called after end_per_testcase/2 for each test case. Note that %% the config cannot be changed here, only the status of the test case. -spec post_end_per_testcase(Suite :: atom(), TC :: atom(), @@ -303,7 +303,7 @@ post_end_per_testcase(Suite,TC,Config,Return,State) -> ct:log("~w:post_end_per_testcase(~w,~w) called", [?MODULE,Suite,TC]), {Return, State}. -%% @doc Called after post_init_per_suite, post_end_per_suite, post_init_per_group, +%% Called after post_init_per_suite, post_end_per_suite, post_init_per_group, %% post_end_per_group and post_end_per_tc if the suite, group or test case failed. %% This function should be used for extra cleanup which might be needed. %% It is not possible to modify the config or the status of the test run. @@ -320,7 +320,7 @@ on_tc_fail(Suite, TC, Reason, State) -> ct:log("~w:on_tc_fail(~w,~w) called", [?MODULE,Suite,TC]), State. -%% @doc Called when a test case is skipped by either user action +%% Called when a test case is skipped by either user action %% or due to an init function failing. Test case can be %% end_per_suite, init_per_group, end_per_group and the actual test cases. -spec on_tc_skip(Suite :: atom(), @@ -338,7 +338,7 @@ on_tc_skip(Suite, TC, Reason, State) -> ct:log("~w:on_tc_skip(~w,~w) called", [?MODULE,Suite,TC]), State. -%% @doc Called when the scope of the CTH is done, this depends on +%% Called when the scope of the CTH is done, this depends on %% when the CTH was specified. This translation table describes when this %% function is called. %% |