diff options
Diffstat (limited to 'lib/crypto/doc')
-rw-r--r-- | lib/crypto/doc/src/Makefile | 18 | ||||
-rw-r--r-- | lib/crypto/doc/src/crypto.xml | 165 | ||||
-rw-r--r-- | lib/crypto/doc/src/engine_load.xml | 110 | ||||
-rw-r--r-- | lib/crypto/doc/src/usersguide.xml | 6 |
4 files changed, 264 insertions, 35 deletions
diff --git a/lib/crypto/doc/src/Makefile b/lib/crypto/doc/src/Makefile index 9c503b8fe0..937bb1419f 100644 --- a/lib/crypto/doc/src/Makefile +++ b/lib/crypto/doc/src/Makefile @@ -9,11 +9,11 @@ # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. -# +# # The Initial Developer of the Original Code is Ericsson Utvecklings AB. # Portions created by Ericsson are Copyright 1999, Ericsson Utvecklings # AB. All Rights Reserved.'' -# +# # $Id$ # include $(ERL_TOP)/make/target.mk @@ -39,12 +39,12 @@ XML_REF3_FILES = crypto.xml XML_REF6_FILES = crypto_app.xml XML_PART_FILES = release_notes.xml usersguide.xml -XML_CHAPTER_FILES = notes.xml licenses.xml fips.xml +XML_CHAPTER_FILES = notes.xml licenses.xml fips.xml engine_load.xml BOOK_FILES = book.xml XML_FILES = $(BOOK_FILES) $(XML_APPLICATION_FILES) $(XML_REF3_FILES) $(XML_REF6_FILES) \ - $(XML_PART_FILES) $(XML_CHAPTER_FILES) + $(XML_PART_FILES) $(XML_CHAPTER_FILES) GIF_FILES = @@ -63,9 +63,9 @@ HTML_REF_MAN_FILE = $(HTMLDIR)/index.html TOP_PDF_FILE = $(PDFDIR)/$(APPLICATION)-$(VSN).pdf # ---------------------------------------------------- -# FLAGS +# FLAGS # ---------------------------------------------------- -XML_FLAGS += +XML_FLAGS += # ---------------------------------------------------- # Targets @@ -73,7 +73,6 @@ XML_FLAGS += $(HTMLDIR)/%.gif: %.gif $(INSTALL_DATA) $< $@ - docs: pdf html man $(TOP_PDF_FILE): $(XML_FILES) @@ -86,7 +85,7 @@ man: $(MAN3_FILES) $(MAN6_FILES) gifs: $(GIF_FILES:%=$(HTMLDIR)/%) -debug opt valgrind: +debug opt valgrind: clean clean_docs clean_tex: rm -rf $(HTMLDIR)/* @@ -97,7 +96,7 @@ clean clean_docs clean_tex: # ---------------------------------------------------- # Release Target -# ---------------------------------------------------- +# ---------------------------------------------------- include $(ERL_TOP)/make/otp_release_targets.mk release_docs_spec: docs @@ -114,4 +113,3 @@ release_docs_spec: docs release_spec: - diff --git a/lib/crypto/doc/src/crypto.xml b/lib/crypto/doc/src/crypto.xml index 5b2c46a004..c0f85945a7 100644 --- a/lib/crypto/doc/src/crypto.xml +++ b/lib/crypto/doc/src/crypto.xml @@ -11,7 +11,7 @@ Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at - + http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software @@ -19,7 +19,6 @@ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. - </legalnotice> <title>crypto</title> @@ -68,11 +67,11 @@ <section> <title>DATA TYPES </title> - - <code>key_value() = integer() | binary() </code> + + <code>key_value() = integer() | binary() </code> <p>Always <c>binary()</c> when used as return value</p> - <code>rsa_public() = [key_value()] = [E, N] </code> + <code>rsa_public() = [key_value()] = [E, N] </code> <p> Where E is the public exponent and N is public modulus. </p> <code>rsa_private() = [key_value()] = [E, N, D] | [E, N, D, P1, P2, E1, E2, C] </code> @@ -85,7 +84,7 @@ <code>dss_public() = [key_value()] = [P, Q, G, Y] </code> <p>Where P, Q and G are the dss parameters and Y is the public key.</p> - <code>dss_private() = [key_value()] = [P, Q, G, X] </code> + <code>dss_private() = [key_value()] = [P, Q, G, X] </code> <p>Where P, Q and G are the dss parameters and X is the private key.</p> <code>srp_public() = key_value() </code> @@ -109,15 +108,16 @@ <code>ecdh_private() = key_value() </code> - <code>ecdh_params() = ec_named_curve() | ec_explicit_curve()</code> + <code>ecdh_params() = ec_named_curve() | ec_explicit_curve()</code> <code>ec_explicit_curve() = - {ec_field(), Prime :: key_value(), Point :: key_value(), Order :: integer(), CoFactor :: none | integer()} </code> + {ec_field(), Prime :: key_value(), Point :: key_value(), Order :: integer(), + CoFactor :: none | integer()} </code> <code>ec_field() = {prime_field, Prime :: integer()} | {characteristic_two_field, M :: integer(), Basis :: ec_basis()}</code> - <code>ec_basis() = {tpbasis, K :: non_neg_integer()} | + <code>ec_basis() = {tpbasis, K :: non_neg_integer()} | {ppbasis, K1 :: non_neg_integer(), K2 :: non_neg_integer(), K3 :: non_neg_integer()} | onbasis</code> @@ -138,14 +138,14 @@ <code>stream_cipher() = rc4 | aes_ctr </code> - <code>block_cipher() = aes_cbc | aes_cfb8 | aes_cfb128 | aes_ige256 | blowfish_cbc | + <code>block_cipher() = aes_cbc | aes_cfb8 | aes_cfb128 | aes_ige256 | blowfish_cbc | blowfish_cfb64 | des_cbc | des_cfb | des3_cbc | des3_cfb | des_ede3 | rc2_cbc </code> - <code>aead_cipher() = aes_gcm | chacha20_poly1305 </code> + <code>aead_cipher() = aes_gcm | chacha20_poly1305 </code> - <code>stream_key() = aes_key() | rc4_key() </code> + <code>stream_key() = aes_key() | rc4_key() </code> - <code>block_key() = aes_key() | blowfish_key() | des_key()| des3_key() </code> + <code>block_key() = aes_key() | blowfish_key() | des_key()| des3_key() </code> <code>aes_key() = iodata() </code> <p>Key length is 128, 192 or 256 bits</p> @@ -174,13 +174,17 @@ Note that both md4 and md5 are recommended only for compatibility with existing applications. </p> <code> cipher_algorithms() = aes_cbc | aes_cfb8 | aes_cfb128 | aes_ctr | aes_gcm | - aes_ige256 | blowfish_cbc | blowfish_cfb64 | chacha20_poly1305 | des_cbc | des_cfb | - des3_cbc | des3_cfb | des_ede3 | rc2_cbc | rc4 </code> - <code> mac_algorithms() = hmac | cmac</code> - <code> public_key_algorithms() = rsa |dss | ecdsa | dh | ecdh | ec_gf2m</code> + aes_ige256 | blowfish_cbc | blowfish_cfb64 | chacha20_poly1305 | des_cbc | + des_cfb | des3_cbc | des3_cfb | des_ede3 | rc2_cbc | rc4 </code> + <code> mac_algorithms() = hmac | cmac</code> + <code> public_key_algorithms() = rsa |dss | ecdsa | dh | ecdh | ec_gf2m</code> <p>Note that ec_gf2m is not strictly a public key algorithm, but a restriction on what curves are supported with ecdsa and ecdh. </p> + <code>engine_method_type() = engine_method_rsa | engine_method_dsa | engine_method_dh | + engine_method_rand | engine_method_ecdh | engine_method_ecdsa | + engine_method_ciphers | engine_method_digests | engine_method_store | + engine_method_pkey_meths | engine_method_pkey_asn1_meths</code> </section> @@ -261,13 +265,13 @@ is not supported by the underlying OpenSSL implementation.</p> </desc> </func> - + <func> <name>bytes_to_integer(Bin) -> Integer </name> <fsummary>Convert binary representation, of an integer, to an Erlang integer.</fsummary> <type> <v>Bin = binary() - as returned by crypto functions</v> - + <v>Integer = integer() </v> </type> <desc> @@ -439,7 +443,7 @@ </type> <desc> <p>Updates the HMAC represented by <c>Context</c> using the given <c>Data</c>. <c>Context</c> - must have been generated using an HMAC init function (such as + must have been generated using an HMAC init function (such as <seealso marker="#hmac_init-2">hmac_init</seealso>). <c>Data</c> can be any length. <c>NewContext</c> must be passed into the next call to <c>hmac_update</c> or to one of the functions <seealso marker="#hmac_final-1">hmac_final</seealso> and @@ -594,7 +598,7 @@ </p> </desc> </func> - + <func> <name>private_encrypt(Type, PlainText, PrivateKey, Padding) -> CipherText</name> <fsummary>Encrypts PlainText using the private Key.</fsummary> @@ -905,6 +909,124 @@ _FloatValue = rand:uniform(). % [0.0; 1.0[</pre> </desc> </func> + <!-- Engine functions --> + <func> + <name>engine_get_all_methods() -> Result</name> + <fsummary>Return list of all possible engine methods</fsummary> + <type> + <v>Result = [EngineMethod::atom()]</v> + </type> + <desc> + <p> + Returns a list of all possible engine methods. + </p> + <p> + May throw exception notsup in case there is + no engine support in the underlying OpenSSL implementation. + </p> + <p> + See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso> + in the User's Guide. + </p> + </desc> + </func> + + <func> + <name>engine_load(EngineId, PreCmds, PostCmds) -> Result</name> + <fsummary>Dynamical load an encryption engine</fsummary> + <type> + <v>EngineId = unicode:chardata()</v> + <v>PreCmds, PostCmds = [{unicode:chardata(), unicode:chardata()}]</v> + <v>Result = {ok, Engine::term()} | {error, Reason::term()}</v> + </type> + <desc> + <p> + Loads the OpenSSL engine given by <c>EngineId</c> if it is available and then returns ok and + an engine handle. This function is the same as calling <c>engine_load/4</c> with + <c>EngineMethods</c> set to a list of all the possible methods. An error tuple is + returned if the engine can't be loaded. + </p> + <p> + The function throws a badarg if the parameters are in wrong format. + It may also throw the exception notsup in case there is + no engine support in the underlying OpenSSL implementation. + </p> + <p> + See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso> + in the User's Guide. + </p> + </desc> + </func> + + <func> + <name>engine_load(EngineId, PreCmds, PostCmds, EngineMethods) -> Result</name> + <fsummary>Dynamical load an encryption engine</fsummary> + <type> + <v>EngineId = unicode:chardata()</v> + <v>PreCmds, PostCmds = [{unicode:chardata(), unicode:chardata()}]</v> + <v>EngineMethods = [engine_method_type()]</v> + <v>Result = {ok, Engine::term()} | {error, Reason::term()}</v> + </type> + <desc> + <p> + Loads the OpenSSL engine given by <c>EngineId</c> if it is available and then returns ok and + an engine handle. An error tuple is returned if the engine can't be loaded. + </p> + <p> + The function throws a badarg if the parameters are in wrong format. + It may also throw the exception notsup in case there is + no engine support in the underlying OpenSSL implementation. + </p> + <p> + See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso> + in the User's Guide. + </p> + </desc> + </func> + + <func> + <name>engine_unload(Engine) -> Result</name> + <fsummary>Dynamical load an encryption engine</fsummary> + <type> + <v>Engine = term()</v> + <v>Result = ok | {error, Reason::term()}</v> + </type> + <desc> + <p> + Unloads the OpenSSL engine given by <c>EngineId</c>. + An error tuple is returned if the engine can't be unloaded. + </p> + <p> + The function throws a badarg if the parameter is in wrong format. + It may also throw the exception notsup in case there is + no engine support in the underlying OpenSSL implementation. + </p> + <p> + See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso> + in the User's Guide. + </p> + </desc> + </func> + + <func> + <name>engine_list() -> Result</name> + <fsummary>List the known engine ids</fsummary> + <type> + <v>Result = [EngineId::unicode:chardata()]</v> + </type> + <desc> + <p>List the id's of all engines in OpenSSL's internal list.</p> + <p> + It may also throw the exception notsup in case there is + no engine support in the underlying OpenSSL implementation. + </p> + <p> + See also the chapter <seealso marker="crypto:engine_load#engine_load">Engine Load</seealso> + in the User's Guide. + </p> + </desc> + </func> + </funcs> <!-- Maybe put this in the users guide --> @@ -979,4 +1101,3 @@ _FloatValue = rand:uniform(). % [0.0; 1.0[</pre> <!-- </p> --> <!-- </section> --> </erlref> - diff --git a/lib/crypto/doc/src/engine_load.xml b/lib/crypto/doc/src/engine_load.xml new file mode 100644 index 0000000000..e5c3f5d561 --- /dev/null +++ b/lib/crypto/doc/src/engine_load.xml @@ -0,0 +1,110 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2017</year><year>2017</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + </legalnotice> + <title>Engine Load</title> + <prepared>Lars Thorsén</prepared> + <date>2017-08-22</date> + <file>engine_load.xml</file> + </header> + <p> + <marker id="engine_load"></marker> + This chapter describes the support for loading encryption engines in the crypto application. + </p> + + <section> + <title>Background</title> + <p> + OpenSSL exposes an Engine API, which makes it possible to plug in alternative + implementations for some or all of the cryptographic operations implemented by OpenSSL. + When configured appropriately, OpenSSL calls the engine's implementation of these + operations instead of its own. + </p> + <p> + Typically, OpenSSL engines provide a hardware implementation of specific cryptographic + operations. The hardware implementation usually offers improved performance over its + software-based counterpart, which is known as cryptographic acceleration. + </p> + </section> + + <section> + <title>Use Cases</title> + <section> + <title>Dynamically load an engine from default directory</title> + <p> + If the engine is located in the OpenSSL/LibreSSL installation <c>engines</c> directory. + </p> + <code> +1> {ok, Engine} = crypto:engine_load(<<"otp_test_engine">>, [], []). + {ok, #Ref}</code> + <note> + <p>The file name requirement on the engine dynamic library can differ between SSL versions.</p> + </note> + </section> + + <section> + <title>Load an engine with the dynamic engine</title> + <p> + Load an engine with the help of the dynamic engine by giving the path to the library. + </p> + <code> + 2> {ok, Engine} = crypto:engine_load(<<"dynamic">>, + [{<<"SO_PATH">>, + <<"/some/path/otp_test_engine.so">>}, + {<<"ID">>, <<"MD5">>}, + <<"LOAD">>], + []). + {ok, #Ref}</code> + <note> + <p>The dynamic engine is not supported in LibreSSL from version 2.2.1</p> + </note> + </section> + + <section> + <title>Load an engine and replace some methods</title> + <p> + Load an engine with the help of the dynamic engine and just + replace some engine methods. + </p> + <code> + 3> Methods = crypto:engine_get_all_methods() -- [engine_method_dh,engine_method_rand, +engine_method_ciphers,engine_method_digests, engine_method_store, +engine_method_pkey_meths, engine_method_pkey_asn1_meths]. +[engine_method_rsa,engine_method_dsa, + engine_method_ecdh,engine_method_ecdsa] + 4> {ok, Engine} = crypto:engine_load(<<"dynamic">>, + [{<<"SO_PATH">>, + <<"/some/path/otp_test_engine.so">>}, + {<<"ID">>, <<"MD5">>}, + <<"LOAD">>], + [], + Methods). + {ok, #Ref}</code> + </section> + + <section> + <title>List all engines currently loaded</title> + <code> + 5> crypto:engine_list(). +[<<"dynamic">>, <<"MD5">>]</code> + </section> + + </section> +</chapter> diff --git a/lib/crypto/doc/src/usersguide.xml b/lib/crypto/doc/src/usersguide.xml index 7971aefff4..f637a1db79 100644 --- a/lib/crypto/doc/src/usersguide.xml +++ b/lib/crypto/doc/src/usersguide.xml @@ -11,7 +11,7 @@ Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at - + http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software @@ -19,7 +19,7 @@ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License. - + </legalnotice> <title>Crypto User's Guide</title> @@ -48,5 +48,5 @@ </description> <xi:include href="licenses.xml"/> <xi:include href="fips.xml"/> + <xi:include href="engine_load.xml"/> </part> - |