diff options
Diffstat (limited to 'lib/dialyzer/test/opaque_SUITE_data/src/recrec/cerl.erl')
| -rw-r--r-- | lib/dialyzer/test/opaque_SUITE_data/src/recrec/cerl.erl | 4602 |
1 files changed, 4602 insertions, 0 deletions
diff --git a/lib/dialyzer/test/opaque_SUITE_data/src/recrec/cerl.erl b/lib/dialyzer/test/opaque_SUITE_data/src/recrec/cerl.erl new file mode 100644 index 0000000000..a4fdbfd5f0 --- /dev/null +++ b/lib/dialyzer/test/opaque_SUITE_data/src/recrec/cerl.erl @@ -0,0 +1,4602 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2001-2016. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% + +%% ===================================================================== +%% @doc Core Erlang abstract syntax trees. +%% +%% <p> This module defines an abstract data type for representing Core +%% Erlang source code as syntax trees.</p> +%% +%% <p>A recommended starting point for the first-time user is the +%% documentation of the function <a +%% href="#type-1"><code>type/1</code></a>.</p> +%% +%% <h3><b>NOTES:</b></h3> +%% +%% <p>This module deals with the composition and decomposition of +%% <em>syntactic</em> entities (as opposed to semantic ones); its +%% purpose is to hide all direct references to the data structures +%% used to represent these entities. With few exceptions, the +%% functions in this module perform no semantic interpretation of +%% their inputs, and in general, the user is assumed to pass +%% type-correct arguments - if this is not done, the effects are not +%% defined.</p> +%% +%% <p>Currently, the internal data structure used is the same as +%% the record-based data structures used traditionally in the Beam +%% compiler.</p> +%% +%% <p>The internal representations of abstract syntax trees are +%% subject to change without notice, and should not be documented +%% outside this module. Furthermore, we do not give any guarantees on +%% how an abstract syntax tree may or may not be represented, <em>with +%% the following exceptions</em>: no syntax tree is represented by a +%% single atom, such as <code>none</code>, by a list constructor +%% <code>[X | Y]</code>, or by the empty list <code>[]</code>. This +%% can be relied on when writing functions that operate on syntax +%% trees.</p> +%% +%% @type cerl(). An abstract Core Erlang syntax tree. +%% +%% <p>Every abstract syntax tree has a <em>type</em>, given by the +%% function <a href="#type-1"><code>type/1</code></a>. In addition, +%% each syntax tree has a list of <em>user annotations</em> (cf. <a +%% href="#get_ann-1"><code>get_ann/1</code></a>), which are included +%% in the Core Erlang syntax.</p> + +-module(cerl). + +-export([abstract/1, add_ann/2, alias_pat/1, alias_var/1, + ann_abstract/2, ann_c_alias/3, ann_c_apply/3, ann_c_atom/2, + ann_c_call/4, ann_c_case/3, ann_c_catch/2, ann_c_char/2, + ann_c_clause/3, ann_c_clause/4, ann_c_cons/3, ann_c_float/2, + ann_c_fname/3, ann_c_fun/3, ann_c_int/2, ann_c_let/4, + ann_c_letrec/3, ann_c_module/4, ann_c_module/5, ann_c_nil/1, + ann_c_cons_skel/3, ann_c_tuple_skel/2, ann_c_primop/3, + ann_c_receive/2, ann_c_receive/4, ann_c_seq/3, ann_c_string/2, + ann_c_try/6, ann_c_tuple/2, ann_c_values/2, ann_c_var/2, + ann_make_data/3, ann_make_list/2, ann_make_list/3, + ann_make_data_skel/3, ann_make_tree/3, apply_args/1, + apply_arity/1, apply_op/1, atom_lit/1, atom_name/1, atom_val/1, + c_alias/2, c_apply/2, c_atom/1, c_call/3, c_case/2, c_catch/1, + c_char/1, c_clause/2, c_clause/3, c_cons/2, c_float/1, + c_fname/2, c_fun/2, c_int/1, c_let/3, c_letrec/2, c_module/3, + c_module/4, c_nil/0, c_cons_skel/2, c_tuple_skel/1, c_primop/2, + c_receive/1, c_receive/3, c_seq/2, c_string/1, c_try/5, + c_tuple/1, c_values/1, c_var/1, call_args/1, call_arity/1, + call_module/1, call_name/1, case_arg/1, case_arity/1, + case_clauses/1, catch_body/1, char_lit/1, char_val/1, + clause_arity/1, clause_body/1, clause_guard/1, clause_pats/1, + clause_vars/1, concrete/1, cons_hd/1, cons_tl/1, copy_ann/2, + data_arity/1, data_es/1, data_type/1, float_lit/1, float_val/1, + fname_arity/1, fname_id/1, fold_literal/1, from_records/1, + fun_arity/1, fun_body/1, fun_vars/1, get_ann/1, int_lit/1, + int_val/1, is_c_alias/1, is_c_apply/1, is_c_atom/1, + is_c_call/1, is_c_case/1, is_c_catch/1, is_c_char/1, + is_c_clause/1, is_c_cons/1, is_c_float/1, is_c_fname/1, + is_c_fun/1, is_c_int/1, is_c_let/1, is_c_letrec/1, is_c_list/1, + is_c_module/1, is_c_nil/1, is_c_primop/1, is_c_receive/1, + is_c_seq/1, is_c_string/1, is_c_try/1, is_c_tuple/1, + is_c_values/1, is_c_var/1, is_data/1, is_leaf/1, is_literal/1, + is_literal_term/1, is_print_char/1, is_print_string/1, + let_arg/1, let_arity/1, let_body/1, let_vars/1, letrec_body/1, + letrec_defs/1, letrec_vars/1, list_elements/1, list_length/1, + make_data/2, make_list/1, make_list/2, make_data_skel/2, + make_tree/2, meta/1, module_attrs/1, module_defs/1, + module_exports/1, module_name/1, module_vars/1, + pat_list_vars/1, pat_vars/1, primop_args/1, primop_arity/1, + primop_name/1, receive_action/1, receive_clauses/1, + receive_timeout/1, seq_arg/1, seq_body/1, set_ann/2, + string_lit/1, string_val/1, subtrees/1, to_records/1, + try_arg/1, try_body/1, try_vars/1, try_evars/1, try_handler/1, + tuple_arity/1, tuple_es/1, type/1, unfold_literal/1, + update_c_alias/3, update_c_apply/3, update_c_call/4, + update_c_case/3, update_c_catch/2, update_c_clause/4, + update_c_cons/3, update_c_cons_skel/3, update_c_fname/2, + update_c_fname/3, update_c_fun/3, update_c_let/4, + update_c_letrec/3, update_c_module/5, update_c_primop/3, + update_c_receive/4, update_c_seq/3, update_c_try/6, + update_c_tuple/2, update_c_tuple_skel/2, update_c_values/2, + update_c_var/2, update_data/3, update_list/2, update_list/3, + update_data_skel/3, update_tree/2, update_tree/3, + values_arity/1, values_es/1, var_name/1, c_binary/1, + update_c_binary/2, ann_c_binary/2, is_c_binary/1, + binary_segments/1, c_bitstr/3, c_bitstr/4, c_bitstr/5, + update_c_bitstr/5, update_c_bitstr/6, ann_c_bitstr/5, + ann_c_bitstr/6, is_c_bitstr/1, bitstr_val/1, bitstr_size/1, + bitstr_bitsize/1, bitstr_unit/1, bitstr_type/1, bitstr_flags/1, + + %% keep map exports here for now + c_map_pattern/1, + is_c_map/1, + is_c_map_pattern/1, + map_es/1, + map_arg/1, + update_c_map/3, + c_map/1, is_c_map_empty/1, + ann_c_map/2, ann_c_map/3, + ann_c_map_pattern/2, + map_pair_op/1,map_pair_key/1,map_pair_val/1, + update_c_map_pair/4, + c_map_pair/2, c_map_pair_exact/2, + ann_c_map_pair/4 + ]). + +-export_type([c_binary/0, c_bitstr/0, c_call/0, c_clause/0, c_cons/0, c_fun/0, + c_let/0, c_literal/0, c_map/0, c_map_pair/0, + c_module/0, c_tuple/0, + c_values/0, c_var/0, cerl/0, + anns/0, attrs/0, defs/0, litval/0, var_name/0]). + +-include("core_parse.hrl"). + +-type c_alias() :: #c_alias{}. +-type c_apply() :: #c_apply{}. +-type c_binary() :: #c_binary{}. +-type c_bitstr() :: #c_bitstr{}. +-type c_call() :: #c_call{}. +-type c_case() :: #c_case{}. +-type c_catch() :: #c_catch{}. +-type c_clause() :: #c_clause{}. +-type c_cons() :: #c_cons{}. +-type c_fun() :: #c_fun{}. +-type c_let() :: #c_let{}. +-type c_letrec() :: #c_letrec{}. +-type c_literal() :: #c_literal{}. +-type c_map() :: #c_map{}. +-type c_map_pair() :: #c_map_pair{}. +-type c_module() :: #c_module{}. +-type c_primop() :: #c_primop{}. +-type c_receive() :: #c_receive{}. +-type c_seq() :: #c_seq{}. +-type c_try() :: #c_try{}. +-type c_tuple() :: #c_tuple{}. +-type c_values() :: #c_values{}. +-type c_var() :: #c_var{}. + +-type cerl() :: c_alias() | c_apply() | c_binary() | c_bitstr() + | c_call() | c_case() | c_catch() | c_clause() | c_cons() + | c_fun() | c_let() | c_letrec() | c_literal() + | c_map() | c_map_pair() + | c_module() | c_primop() | c_receive() | c_seq() + | c_try() | c_tuple() | c_values() | c_var(). + +-type anns() :: [term()]. +-type attr() :: {c_literal(), c_literal()}. +-type attrs() :: [attr()]. +-type def() :: {c_var(), c_fun()}. +-type defs() :: [def()]. + +-type litval() :: atom() | bitstring() | map() | number() + | string() | tuple() | [litval()]. + +-type var_name() :: integer() | atom() | {atom(), arity()}. + + +%% ===================================================================== +%% Representation (general) +%% +%% All nodes are represented by tuples of arity 2 or (generally) +%% greater, whose first element is an atom which uniquely identifies the +%% type of the node, and whose second element is a (proper) list of +%% annotation terms associated with the node - this is by default empty. +%% +%% For most node constructor functions, there are analogous functions +%% named 'ann_...', taking one extra argument 'As' (always the first +%% argument), specifying an annotation list at node creation time. +%% Similarly, there are also functions named 'update_...', taking one +%% extra argument 'Old', specifying a node from which all fields not +%% explicitly given as arguments should be copied (generally, this is +%% the annotation field only). +%% ===================================================================== + +%% @spec type(Node::cerl()) -> atom() +%% +%% @doc Returns the type tag of <code>Node</code>. Current node types +%% are: +%% +%% <p><center><table border="1"> +%% <tr> +%% <td>alias</td> +%% <td>apply</td> +%% <td>binary</td> +%% <td>bitstr</td> +%% <td>call</td> +%% <td>case</td> +%% <td>catch</td> +%% <td>clause</td> +%% </tr><tr> +%% <td>cons</td> +%% <td>fun</td> +%% <td>let</td> +%% <td>letrec</td> +%% <td>literal</td> +%% <td>map</td> +%% <td>map_pair</td> +%% <td>module</td> +%% </tr><tr> +%% <td>primop</td> +%% <td>receive</td> +%% <td>seq</td> +%% <td>try</td> +%% <td>tuple</td> +%% <td>values</td> +%% <td>var</td> +%% </tr> +%% </table></center></p> +%% +%% <p>Note: The name of the primary constructor function for a node +%% type is always the name of the type itself, prefixed by +%% "<code>c_</code>"; recognizer predicates are correspondingly +%% prefixed by "<code>is_c_</code>". Furthermore, to simplify +%% preservation of annotations (cf. <code>get_ann/1</code>), there are +%% analogous constructor functions prefixed by "<code>ann_c_</code>" +%% and "<code>update_c_</code>", for setting the annotation list of +%% the new node to either a specific value or to the annotations of an +%% existing node, respectively.</p> +%% +%% @see abstract/1 +%% @see c_alias/2 +%% @see c_apply/2 +%% @see c_binary/1 +%% @see c_bitstr/5 +%% @see c_call/3 +%% @see c_case/2 +%% @see c_catch/1 +%% @see c_clause/3 +%% @see c_cons/2 +%% @see c_fun/2 +%% @see c_let/3 +%% @see c_letrec/2 +%% @see c_module/3 +%% @see c_primop/2 +%% @see c_receive/1 +%% @see c_seq/2 +%% @see c_try/5 +%% @see c_tuple/1 +%% @see c_values/1 +%% @see c_var/1 +%% @see get_ann/1 +%% @see to_records/1 +%% @see from_records/1 +%% @see data_type/1 +%% @see subtrees/1 +%% @see meta/1 + +-type ctype() :: 'alias' | 'apply' | 'binary' | 'bitrst' | 'call' | 'case' + | 'catch' | 'clause' | 'cons' | 'fun' | 'let' | 'letrec' + | 'literal' | 'map' | 'map_pair' | 'module' | 'primop' + | 'receive' | 'seq' | 'try' | 'tuple' | 'values' | 'var'. + +-spec type(cerl()) -> ctype(). + +type(#c_alias{}) -> alias; +type(#c_apply{}) -> apply; +type(#c_binary{}) -> binary; +type(#c_bitstr{}) -> bitstr; +type(#c_call{}) -> call; +type(#c_case{}) -> 'case'; +type(#c_catch{}) -> 'catch'; +type(#c_clause{}) -> clause; +type(#c_cons{}) -> cons; +type(#c_fun{}) -> 'fun'; +type(#c_let{}) -> 'let'; +type(#c_letrec{}) -> letrec; +type(#c_literal{}) -> literal; +type(#c_map{}) -> map; +type(#c_map_pair{}) -> map_pair; +type(#c_module{}) -> module; +type(#c_primop{}) -> primop; +type(#c_receive{}) -> 'receive'; +type(#c_seq{}) -> seq; +type(#c_try{}) -> 'try'; +type(#c_tuple{}) -> tuple; +type(#c_values{}) -> values; +type(#c_var{}) -> var. + + +%% @spec is_leaf(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is a leaf node, +%% otherwise <code>false</code>. The current leaf node types are +%% <code>literal</code> and <code>var</code>. +%% +%% <p>Note: all literals (cf. <code>is_literal/1</code>) are leaf +%% nodes, even if they represent structured (constant) values such as +%% <code>{foo, [bar, baz]}</code>. Also note that variables are leaf +%% nodes but not literals.</p> +%% +%% @see type/1 +%% @see is_literal/1 + +-spec is_leaf(cerl()) -> boolean(). + +is_leaf(Node) -> + case type(Node) of + literal -> true; + var -> true; + _ -> false + end. + + +%% @spec get_ann(cerl()) -> anns() +%% +%% @doc Returns the list of user annotations associated with a syntax +%% tree node. For a newly created node, this is the empty list. The +%% annotations may be any terms. +%% +%% @see set_ann/2 + +-spec get_ann(cerl()) -> anns(). + +get_ann(Node) -> + element(2, Node). + + +%% @spec set_ann(Node::cerl(), Annotations::anns()) -> cerl() +%% +%% @doc Sets the list of user annotations of <code>Node</code> to +%% <code>Annotations</code>. +%% +%% @see get_ann/1 +%% @see add_ann/2 +%% @see copy_ann/2 + +-spec set_ann(cerl(), anns()) -> cerl(). + +set_ann(Node, List) -> + setelement(2, Node, List). + + +%% @spec add_ann(Annotations::anns(), Node::cerl()) -> cerl() +%% +%% @doc Appends <code>Annotations</code> to the list of user +%% annotations of <code>Node</code>. +%% +%% <p>Note: this is equivalent to <code>set_ann(Node, Annotations ++ +%% get_ann(Node))</code>, but potentially more efficient.</p> +%% +%% @see get_ann/1 +%% @see set_ann/2 + +-spec add_ann(anns(), cerl()) -> cerl(). + +add_ann(Terms, Node) -> + set_ann(Node, Terms ++ get_ann(Node)). + + +%% @spec copy_ann(Source::cerl(), Target::cerl()) -> cerl() +%% +%% @doc Copies the list of user annotations from <code>Source</code> +%% to <code>Target</code>. +%% +%% <p>Note: this is equivalent to <code>set_ann(Target, +%% get_ann(Source))</code>, but potentially more efficient.</p> +%% +%% @see get_ann/1 +%% @see set_ann/2 + +-spec copy_ann(cerl(), cerl()) -> cerl(). + +copy_ann(Source, Target) -> + set_ann(Target, get_ann(Source)). + + +%% @spec abstract(Term::litval()) -> cerl() +%% +%% @doc Creates a syntax tree corresponding to an Erlang term. +%% <code>Term</code> must be a literal term, i.e., one that can be +%% represented as a source code literal. Thus, it may not contain a +%% process identifier, port, reference or function value as a subterm. +%% +%% <p>Note: This is a constant time operation.</p> +%% +%% @see ann_abstract/2 +%% @see concrete/1 +%% @see is_literal/1 +%% @see is_literal_term/1 + +-spec abstract(litval()) -> c_literal(). + +abstract(T) -> + #c_literal{val = T}. + + +%% @spec ann_abstract(Annotations::anns(), Term::litval()) -> cerl() +%% @see abstract/1 + +-spec ann_abstract(anns(), litval()) -> c_literal(). + +ann_abstract(As, T) -> + #c_literal{val = T, anno = As}. + + +%% @spec is_literal_term(Term::term()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Term</code> can be +%% represented as a literal, otherwise <code>false</code>. This +%% function takes time proportional to the size of <code>Term</code>. +%% +%% @see abstract/1 + +-spec is_literal_term(term()) -> boolean(). + +is_literal_term(T) when is_integer(T) -> true; +is_literal_term(T) when is_float(T) -> true; +is_literal_term(T) when is_atom(T) -> true; +is_literal_term([]) -> true; +is_literal_term([H | T]) -> + is_literal_term(H) andalso is_literal_term(T); +is_literal_term(T) when is_tuple(T) -> + is_literal_term_list(tuple_to_list(T)); +is_literal_term(B) when is_bitstring(B) -> true; +is_literal_term(M) when is_map(M) -> + is_literal_term_list(maps:to_list(M)); +is_literal_term(_) -> + false. + +-spec is_literal_term_list([term()]) -> boolean(). + +is_literal_term_list([T | Ts]) -> + case is_literal_term(T) of + true -> + is_literal_term_list(Ts); + false -> + false + end; +is_literal_term_list([]) -> + true. + + +%% @spec concrete(Node::c_literal()) -> litval() +%% +%% @doc Returns the Erlang term represented by a syntax tree. An +%% exception is thrown if <code>Node</code> does not represent a +%% literal term. +%% +%% <p>Note: This is a constant time operation.</p> +%% +%% @see abstract/1 +%% @see is_literal/1 + +%% Because the normal tuple and list constructor operations always +%% return a literal if the arguments are literals, 'concrete' and +%% 'is_literal' never need to traverse the structure. + +-spec concrete(c_literal()) -> litval(). + +concrete(#c_literal{val = V}) -> + V. + + +%% @spec is_literal(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> represents a +%% literal term, otherwise <code>false</code>. This function returns +%% <code>true</code> if and only if the value of +%% <code>concrete(Node)</code> is defined. +%% +%% <p>Note: This is a constant time operation.</p> +%% +%% @see abstract/1 +%% @see concrete/1 +%% @see fold_literal/1 + +-spec is_literal(cerl()) -> boolean(). + +is_literal(#c_literal{}) -> + true; +is_literal(_) -> + false. + + +%% @spec fold_literal(Node::cerl()) -> cerl() +%% +%% @doc Assures that literals have a compact representation. This is +%% occasionally useful if <code>c_cons_skel/2</code>, +%% <code>c_tuple_skel/1</code> or <code>unfold_literal/1</code> were +%% used in the construction of <code>Node</code>, and you want to revert +%% to the normal "folded" representation of literals. If +%% <code>Node</code> represents a tuple or list constructor, its +%% elements are rewritten recursively, and the node is reconstructed +%% using <code>c_cons/2</code> or <code>c_tuple/1</code>, respectively; +%% otherwise, <code>Node</code> is not changed. +%% +%% @see is_literal/1 +%% @see c_cons_skel/2 +%% @see c_tuple_skel/1 +%% @see c_cons/2 +%% @see c_tuple/1 +%% @see unfold_literal/1 + +-spec fold_literal(cerl()) -> cerl(). + +fold_literal(Node) -> + case type(Node) of + tuple -> + update_c_tuple(Node, fold_literal_list(tuple_es(Node))); + cons -> + update_c_cons(Node, fold_literal(cons_hd(Node)), + fold_literal(cons_tl(Node))); + _ -> + Node + end. + +fold_literal_list([E | Es]) -> + [fold_literal(E) | fold_literal_list(Es)]; +fold_literal_list([]) -> + []. + + +%% @spec unfold_literal(Node::cerl()) -> cerl() +%% +%% @doc Assures that literals have a fully expanded representation. If +%% <code>Node</code> represents a literal tuple or list constructor, its +%% elements are rewritten recursively, and the node is reconstructed +%% using <code>c_cons_skel/2</code> or <code>c_tuple_skel/1</code>, +%% respectively; otherwise, <code>Node</code> is not changed. The {@link +%% fold_literal/1} can be used to revert to the normal compact +%% representation. +%% +%% @see is_literal/1 +%% @see c_cons_skel/2 +%% @see c_tuple_skel/1 +%% @see c_cons/2 +%% @see c_tuple/1 +%% @see fold_literal/1 + +-spec unfold_literal(cerl()) -> cerl(). + +unfold_literal(Node) -> + case type(Node) of + literal -> + copy_ann(Node, unfold_concrete(concrete(Node))); + _ -> + Node + end. + +unfold_concrete(Val) -> + case Val of + _ when is_tuple(Val) -> + c_tuple_skel(unfold_concrete_list(tuple_to_list(Val))); + [H|T] -> + c_cons_skel(unfold_concrete(H), unfold_concrete(T)); + _ -> + abstract(Val) + end. + +unfold_concrete_list([E | Es]) -> + [unfold_concrete(E) | unfold_concrete_list(Es)]; +unfold_concrete_list([]) -> + []. + + +%% --------------------------------------------------------------------- + +%% @spec c_module(Name::c_literal(), Exports, Definitions) -> c_module() +%% +%% Exports = [c_var()] +%% Definitions = defs() +%% +%% @equiv c_module(Name, Exports, [], Definitions) + +-spec c_module(c_literal(), [c_var()], defs()) -> c_module(). + +c_module(Name, Exports, Defs) -> + #c_module{name = Name, exports = Exports, attrs = [], defs = Defs}. + + +%% @spec c_module(Name::c_literal(), Exports, Attributes, Definitions) -> +%% c_module() +%% +%% Exports = [c_var()] +%% Attributes = attrs() +%% Definitions = defs() +%% +%% @doc Creates an abstract module definition. The result represents +%% <pre> +%% module <em>Name</em> [<em>E1</em>, ..., <em>Ek</em>] +%% attributes [<em>K1</em> = <em>T1</em>, ..., +%% <em>Km</em> = <em>Tm</em>] +%% <em>V1</em> = <em>F1</em> +%% ... +%% <em>Vn</em> = <em>Fn</em> +%% end</pre> +%% +%% if <code>Exports</code> = <code>[E1, ..., Ek]</code>, +%% <code>Attributes</code> = <code>[{K1, T1}, ..., {Km, Tm}]</code>, +%% and <code>Definitions</code> = <code>[{V1, F1}, ..., {Vn, +%% Fn}]</code>. +%% +%% <p><code>Name</code> and all the <code>Ki</code> must be atom +%% literals, and all the <code>Ti</code> must be constant literals. All +%% the <code>Vi</code> and <code>Ei</code> must have type +%% <code>var</code> and represent function names. All the +%% <code>Fi</code> must have type <code>'fun'</code>.</p> +%% +%% @see c_module/3 +%% @see module_name/1 +%% @see module_exports/1 +%% @see module_attrs/1 +%% @see module_defs/1 +%% @see module_vars/1 +%% @see ann_c_module/4 +%% @see ann_c_module/5 +%% @see update_c_module/5 +%% @see c_atom/1 +%% @see c_var/1 +%% @see c_fun/2 +%% @see is_literal/1 + +-spec c_module(c_literal(), [c_var()], attrs(), defs()) -> c_module(). + +c_module(Name, Exports, Attrs, Defs) -> + #c_module{name = Name, exports = Exports, attrs = Attrs, defs = Defs}. + + +%% @spec ann_c_module(As::anns(), Name::c_literal(), Exports, +%% Definitions) -> c_module() +%% +%% Exports = [c_var()] +%% Definitions = defs() +%% +%% @see c_module/3 +%% @see ann_c_module/5 + +-spec ann_c_module(anns(), c_literal(), [c_var()], defs()) -> c_module(). + +ann_c_module(As, Name, Exports, Defs) -> + #c_module{name = Name, exports = Exports, attrs = [], defs = Defs, + anno = As}. + + +%% @spec ann_c_module(As::anns(), Name::c_literal(), Exports, +%% Attributes, Definitions) -> c_module() +%% +%% Exports = [c_var()] +%% Attributes = attrs() +%% Definitions = defs() +%% +%% @see c_module/4 +%% @see ann_c_module/4 + +-spec ann_c_module(anns(), c_literal(), [c_var()], attrs(), defs()) -> + c_module(). + +ann_c_module(As, Name, Exports, Attrs, Defs) -> + #c_module{name = Name, exports = Exports, attrs = Attrs, defs = Defs, + anno = As}. + + +%% @spec update_c_module(Old::cerl(), Name::c_literal(), Exports, +%% Attributes, Definitions) -> c_module() +%% +%% Exports = [c_var()] +%% Attributes = attrs() +%% Definitions = defs() +%% +%% @see c_module/4 + +-spec update_c_module(c_module(), c_literal(), [c_var()], attrs(), defs()) -> + c_module(). + +update_c_module(Node, Name, Exports, Attrs, Defs) -> + #c_module{name = Name, exports = Exports, attrs = Attrs, defs = Defs, + anno = get_ann(Node)}. + + +%% @spec is_c_module(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% module definition, otherwise <code>false</code>. +%% +%% @see type/1 + +-spec is_c_module(cerl()) -> boolean(). + +is_c_module(#c_module{}) -> + true; +is_c_module(_) -> + false. + + +%% @spec module_name(Node::c_module()) -> c_literal() +%% +%% @doc Returns the name subtree of an abstract module definition. +%% +%% @see c_module/4 + +-spec module_name(c_module()) -> c_literal(). + +module_name(Node) -> + Node#c_module.name. + + +%% @spec module_exports(Node::c_module()) -> [c_var()] +%% +%% @doc Returns the list of exports subtrees of an abstract module +%% definition. +%% +%% @see c_module/4 + +-spec module_exports(c_module()) -> [c_var()]. + +module_exports(Node) -> + Node#c_module.exports. + + +%% @spec module_attrs(Node::c_module()) -> [{cerl(), cerl()}] +%% +%% @doc Returns the list of pairs of attribute key/value subtrees of +%% an abstract module definition. +%% +%% @see c_module/4 + +-spec module_attrs(c_module()) -> attrs(). + +module_attrs(Node) -> + Node#c_module.attrs. + + +%% @spec module_defs(Node::c_module()) -> defs() +%% +%% @doc Returns the list of function definitions of an abstract module +%% definition. +%% +%% @see c_module/4 + +-spec module_defs(c_module()) -> defs(). + +module_defs(Node) -> + Node#c_module.defs. + + +%% @spec module_vars(Node::c_module()) -> [c_var()] +%% +%% @doc Returns the list of left-hand side function variable subtrees +%% of an abstract module definition. +%% +%% @see c_module/4 + +-spec module_vars(c_module()) -> [c_var()]. + +module_vars(Node) -> + [F || {F, _} <- module_defs(Node)]. + + +%% --------------------------------------------------------------------- + +%% @spec c_int(Value::integer()) -> c_literal() +%% +%% @doc Creates an abstract integer literal. The lexical +%% representation is the canonical decimal numeral of +%% <code>Value</code>. +%% +%% @see ann_c_int/2 +%% @see is_c_int/1 +%% @see int_val/1 +%% @see int_lit/1 +%% @see c_char/1 + +-spec c_int(integer()) -> c_literal(). + +c_int(Value) -> + #c_literal{val = Value}. + + +%% @spec ann_c_int(As::anns(), Value::integer()) -> c_literal() +%% @see c_int/1 + +-spec ann_c_int(anns(), integer()) -> c_literal(). + +ann_c_int(As, Value) -> + #c_literal{val = Value, anno = As}. + + +%% @spec is_c_int(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> represents an +%% integer literal, otherwise <code>false</code>. +%% @see c_int/1 + +-spec is_c_int(cerl()) -> boolean(). + +is_c_int(#c_literal{val = V}) when is_integer(V) -> + true; +is_c_int(_) -> + false. + + +%% @spec int_val(c_literal()) -> integer() +%% +%% @doc Returns the value represented by an integer literal node. +%% @see c_int/1 + +-spec int_val(c_literal()) -> integer(). + +int_val(Node) -> + Node#c_literal.val. + + +%% @spec int_lit(c_literal()) -> string() +%% +%% @doc Returns the numeral string represented by an integer literal +%% node. +%% @see c_int/1 + +-spec int_lit(c_literal()) -> string(). + +int_lit(Node) -> + integer_to_list(int_val(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_float(Value::float()) -> c_literal() +%% +%% @doc Creates an abstract floating-point literal. The lexical +%% representation is the decimal floating-point numeral of +%% <code>Value</code>. +%% +%% @see ann_c_float/2 +%% @see is_c_float/1 +%% @see float_val/1 +%% @see float_lit/1 + +%% Note that not all floating-point numerals can be represented with +%% full precision. + +-spec c_float(float()) -> c_literal(). + +c_float(Value) -> + #c_literal{val = Value}. + + +%% @spec ann_c_float(As::anns(), Value::float()) -> c_literal() +%% @see c_float/1 + +-spec ann_c_float(anns(), float()) -> c_literal(). + +ann_c_float(As, Value) -> + #c_literal{val = Value, anno = As}. + + +%% @spec is_c_float(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> represents a +%% floating-point literal, otherwise <code>false</code>. +%% @see c_float/1 + +-spec is_c_float(cerl()) -> boolean(). + +is_c_float(#c_literal{val = V}) when is_float(V) -> + true; +is_c_float(_) -> + false. + + +%% @spec float_val(c_literal()) -> float() +%% +%% @doc Returns the value represented by a floating-point literal +%% node. +%% @see c_float/1 + +-spec float_val(c_literal()) -> float(). + +float_val(Node) -> + Node#c_literal.val. + + +%% @spec float_lit(c_literal()) -> string() +%% +%% @doc Returns the numeral string represented by a floating-point +%% literal node. +%% @see c_float/1 + +-spec float_lit(c_literal()) -> string(). + +float_lit(Node) -> + float_to_list(float_val(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_atom(Name) -> c_literal() +%% Name = atom() | string() +%% +%% @doc Creates an abstract atom literal. The print name of the atom +%% is the character sequence represented by <code>Name</code>. +%% +%% <p>Note: passing a string as argument to this function causes a +%% corresponding atom to be created for the internal representation.</p> +%% +%% @see ann_c_atom/2 +%% @see is_c_atom/1 +%% @see atom_val/1 +%% @see atom_name/1 +%% @see atom_lit/1 + +-spec c_atom(atom() | string()) -> c_literal(). + +c_atom(Name) when is_atom(Name) -> + #c_literal{val = Name}; +c_atom(Name) -> + #c_literal{val = list_to_atom(Name)}. + + +%% @spec ann_c_atom(As::anns(), Name) -> cerl() +%% Name = atom() | string() +%% @see c_atom/1 + +-spec ann_c_atom(anns(), atom() | string()) -> c_literal(). + +ann_c_atom(As, Name) when is_atom(Name) -> + #c_literal{val = Name, anno = As}; +ann_c_atom(As, Name) -> + #c_literal{val = list_to_atom(Name), anno = As}. + + +%% @spec is_c_atom(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> represents an +%% atom literal, otherwise <code>false</code>. +%% +%% @see c_atom/1 + +-spec is_c_atom(cerl()) -> boolean(). + +is_c_atom(#c_literal{val = V}) when is_atom(V) -> + true; +is_c_atom(_) -> + false. + +%% @spec atom_val(c_literal()) -> atom() +%% +%% @doc Returns the value represented by an abstract atom. +%% +%% @see c_atom/1 + +-spec atom_val(c_literal()) -> atom(). + +atom_val(Node) -> + Node#c_literal.val. + + +%% @spec atom_name(c_literal()) -> string() +%% +%% @doc Returns the printname of an abstract atom. +%% +%% @see c_atom/1 + +-spec atom_name(c_literal()) -> string(). + +atom_name(Node) -> + atom_to_list(atom_val(Node)). + + +%% @spec atom_lit(cerl()) -> string() +%% +%% @doc Returns the literal string represented by an abstract +%% atom. This always includes surrounding single-quote characters. +%% +%% <p>Note that an abstract atom may have several literal +%% representations, and that the representation yielded by this +%% function is not fixed; e.g., +%% <code>atom_lit(c_atom("a\012b"))</code> could yield the string +%% <code>"\'a\\nb\'"</code>.</p> +%% +%% @see c_atom/1 + +%% TODO: replace the use of the unofficial 'write_string/2'. + +-spec atom_lit(cerl()) -> nonempty_string(). + +atom_lit(Node) -> + io_lib:write_string(atom_name(Node), $'). %' stupid Emacs. + + +%% --------------------------------------------------------------------- + +%% @spec c_char(Value) -> c_literal() +%% +%% Value = char() | integer() +%% +%% @doc Creates an abstract character literal. If the local +%% implementation of Erlang defines <code>char()</code> as a subset of +%% <code>integer()</code>, this function is equivalent to +%% <code>c_int/1</code>. Otherwise, if the given value is an integer, +%% it will be converted to the character with the corresponding +%% code. The lexical representation of a character is +%% "<code>$<em>Char</em></code>", where <code>Char</code> is a single +%% printing character or an escape sequence. +%% +%% @see c_int/1 +%% @see c_string/1 +%% @see ann_c_char/2 +%% @see is_c_char/1 +%% @see char_val/1 +%% @see char_lit/1 +%% @see is_print_char/1 + +-spec c_char(non_neg_integer()) -> c_literal(). + +c_char(Value) when is_integer(Value), Value >= 0 -> + #c_literal{val = Value}. + + +%% @spec ann_c_char(As::anns(), Value::char()) -> c_literal() +%% @see c_char/1 + +-spec ann_c_char(anns(), char()) -> c_literal(). + +ann_c_char(As, Value) -> + #c_literal{val = Value, anno = As}. + + +%% @spec is_c_char(Node::c_literal()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> may represent a +%% character literal, otherwise <code>false</code>. +%% +%% <p>If the local implementation of Erlang defines +%% <code>char()</code> as a subset of <code>integer()</code>, then +%% <code>is_c_int(<em>Node</em>)</code> will also yield +%% <code>true</code>.</p> +%% +%% @see c_char/1 +%% @see is_print_char/1 + +-spec is_c_char(c_literal()) -> boolean(). + +is_c_char(#c_literal{val = V}) when is_integer(V), V >= 0 -> + is_char_value(V); +is_c_char(_) -> + false. + + +%% @spec is_print_char(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> may represent a +%% "printing" character, otherwise <code>false</code>. (Cf. +%% <code>is_c_char/1</code>.) A "printing" character has either a +%% given graphical representation, or a "named" escape sequence such +%% as "<code>\n</code>". Currently, only ISO 8859-1 (Latin-1) +%% character values are recognized. +%% +%% @see c_char/1 +%% @see is_c_char/1 + +-spec is_print_char(cerl()) -> boolean(). + +is_print_char(#c_literal{val = V}) when is_integer(V), V >= 0 -> + is_print_char_value(V); +is_print_char(_) -> + false. + + +%% @spec char_val(c_literal()) -> char() +%% +%% @doc Returns the value represented by an abstract character literal. +%% +%% @see c_char/1 + +-spec char_val(c_literal()) -> char(). + +char_val(Node) -> + Node#c_literal.val. + + +%% @spec char_lit(c_literal()) -> string() +%% +%% @doc Returns the literal string represented by an abstract +%% character. This includes a leading <code>$</code> +%% character. Currently, all characters that are not in the set of ISO +%% 8859-1 (Latin-1) "printing" characters will be escaped. +%% +%% @see c_char/1 + +-spec char_lit(c_literal()) -> nonempty_string(). + +char_lit(Node) -> + io_lib:write_char(char_val(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_string(Value::string()) -> c_literal() +%% +%% @doc Creates an abstract string literal. Equivalent to creating an +%% abstract list of the corresponding character literals +%% (cf. <code>is_c_string/1</code>), but is typically more +%% efficient. The lexical representation of a string is +%% "<code>"<em>Chars</em>"</code>", where <code>Chars</code> is a +%% sequence of printing characters or spaces. +%% +%% @see c_char/1 +%% @see ann_c_string/2 +%% @see is_c_string/1 +%% @see string_val/1 +%% @see string_lit/1 +%% @see is_print_string/1 + +-spec c_string(string()) -> c_literal(). + +c_string(Value) -> + #c_literal{val = Value}. + + +%% @spec ann_c_string(As::anns(), Value::string()) -> c_literal() +%% @see c_string/1 + +-spec ann_c_string(anns(), string()) -> c_literal(). + +ann_c_string(As, Value) -> + #c_literal{val = Value, anno = As}. + + +%% @spec is_c_string(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> may represent a +%% string literal, otherwise <code>false</code>. Strings are defined +%% as lists of characters; see <code>is_c_char/1</code> for details. +%% +%% @see c_string/1 +%% @see is_c_char/1 +%% @see is_print_string/1 + +-spec is_c_string(cerl()) -> boolean(). + +is_c_string(#c_literal{val = V}) -> + is_char_list(V); +is_c_string(_) -> + false. + + +%% @spec is_print_string(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> may represent a +%% string literal containing only "printing" characters, otherwise +%% <code>false</code>. See <code>is_c_string/1</code> and +%% <code>is_print_char/1</code> for details. Currently, only ISO +%% 8859-1 (Latin-1) character values are recognized. +%% +%% @see c_string/1 +%% @see is_c_string/1 +%% @see is_print_char/1 + +-spec is_print_string(cerl()) -> boolean(). + +is_print_string(#c_literal{val = V}) -> + is_print_char_list(V); +is_print_string(_) -> + false. + + +%% @spec string_val(cerl()) -> string() +%% +%% @doc Returns the value represented by an abstract string literal. +%% +%% @see c_string/1 + +-spec string_val(c_literal()) -> string(). + +string_val(Node) -> + Node#c_literal.val. + + +%% @spec string_lit(cerl()) -> string() +%% +%% @doc Returns the literal string represented by an abstract string. +%% This includes surrounding double-quote characters +%% <code>"..."</code>. Currently, characters that are not in the set +%% of ISO 8859-1 (Latin-1) "printing" characters will be escaped, +%% except for spaces. +%% +%% @see c_string/1 + +-spec string_lit(c_literal()) -> nonempty_string(). + +string_lit(Node) -> + io_lib:write_string(string_val(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_nil() -> cerl() +%% +%% @doc Creates an abstract empty list. The result represents +%% "<code>[]</code>". The empty list is traditionally called "nil". +%% +%% @see ann_c_nil/1 +%% @see is_c_list/1 +%% @see c_cons/2 + +-spec c_nil() -> c_literal(). + +c_nil() -> + #c_literal{val = []}. + + +%% @spec ann_c_nil(As::anns()) -> cerl() +%% @see c_nil/0 + +-spec ann_c_nil(anns()) -> c_literal(). + +ann_c_nil(As) -> + #c_literal{val = [], anno = As}. + + +%% @spec is_c_nil(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% empty list, otherwise <code>false</code>. + +-spec is_c_nil(cerl()) -> boolean(). + +is_c_nil(#c_literal{val = []}) -> + true; +is_c_nil(_) -> + false. + + +%% --------------------------------------------------------------------- + +%% @spec c_cons(Head::cerl(), Tail::cerl()) -> cerl() +%% +%% @doc Creates an abstract list constructor. The result represents +%% "<code>[<em>Head</em> | <em>Tail</em>]</code>". Note that if both +%% <code>Head</code> and <code>Tail</code> have type +%% <code>literal</code>, then the result will also have type +%% <code>literal</code>, and annotations on <code>Head</code> and +%% <code>Tail</code> are lost. +%% +%% <p>Recall that in Erlang, the tail element of a list constructor is +%% not necessarily a list.</p> +%% +%% @see ann_c_cons/3 +%% @see update_c_cons/3 +%% @see c_cons_skel/2 +%% @see is_c_cons/1 +%% @see cons_hd/1 +%% @see cons_tl/1 +%% @see is_c_list/1 +%% @see c_nil/0 +%% @see list_elements/1 +%% @see list_length/1 +%% @see make_list/2 + +%% *Always* collapse literals. + +-spec c_cons(cerl(), cerl()) -> c_literal() | c_cons(). + +c_cons(#c_literal{val = Head}, #c_literal{val = Tail}) -> + #c_literal{val = [Head | Tail]}; +c_cons(Head, Tail) -> + #c_cons{hd = Head, tl = Tail}. + + +%% @spec ann_c_cons(As::anns(), Head::cerl(), Tail::cerl()) -> cerl() +%% @see c_cons/2 + +-spec ann_c_cons(anns(), cerl(), cerl()) -> c_literal() | c_cons(). + +ann_c_cons(As, #c_literal{val = Head}, #c_literal{val = Tail}) -> + #c_literal{val = [Head | Tail], anno = As}; +ann_c_cons(As, Head, Tail) -> + #c_cons{hd = Head, tl = Tail, anno = As}. + + +%% @spec update_c_cons(Old::cerl(), Head::cerl(), Tail::cerl()) -> +%% cerl() +%% @see c_cons/2 + +-spec update_c_cons(c_literal() | c_cons(), cerl(), cerl()) -> + c_literal() | c_cons(). + +update_c_cons(Node, #c_literal{val = Head}, #c_literal{val = Tail}) -> + #c_literal{val = [Head | Tail], anno = get_ann(Node)}; +update_c_cons(Node, Head, Tail) -> + #c_cons{hd = Head, tl = Tail, anno = get_ann(Node)}. + + +%% @spec c_cons_skel(Head::cerl(), Tail::cerl()) -> c_cons() +%% +%% @doc Creates an abstract list constructor skeleton. Does not fold +%% constant literals, i.e., the result always has type +%% <code>cons</code>, representing "<code>[<em>Head</em> | +%% <em>Tail</em>]</code>". +%% +%% <p>This function is occasionally useful when it is necessary to have +%% annotations on the subnodes of a list constructor node, even when the +%% subnodes are constant literals. Note however that +%% <code>is_literal/1</code> will yield <code>false</code> and +%% <code>concrete/1</code> will fail if passed the result from this +%% function.</p> +%% +%% <p><code>fold_literal/1</code> can be used to revert a node to the +%% normal-form representation.</p> +%% +%% @see ann_c_cons_skel/3 +%% @see update_c_cons_skel/3 +%% @see c_cons/2 +%% @see is_c_cons/1 +%% @see is_c_list/1 +%% @see c_nil/0 +%% @see is_literal/1 +%% @see fold_literal/1 +%% @see concrete/1 + +%% *Never* collapse literals. + +-spec c_cons_skel(cerl(), cerl()) -> c_cons(). + +c_cons_skel(Head, Tail) -> + #c_cons{hd = Head, tl = Tail}. + + +%% @spec ann_c_cons_skel(As::anns(), Head::cerl(), Tail::cerl()) -> +%% c_cons() +%% @see c_cons_skel/2 + +-spec ann_c_cons_skel(anns(), cerl(), cerl()) -> c_cons(). + +ann_c_cons_skel(As, Head, Tail) -> + #c_cons{hd = Head, tl = Tail, anno = As}. + + +%% @spec update_c_cons_skel(Old::cerl(), Head::cerl(), Tail::cerl()) -> +%% c_cons() +%% @see c_cons_skel/2 + +-spec update_c_cons_skel(c_cons() | c_literal(), cerl(), cerl()) -> c_cons(). + +update_c_cons_skel(Node, Head, Tail) -> + #c_cons{hd = Head, tl = Tail, anno = get_ann(Node)}. + + +%% @spec is_c_cons(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% list constructor, otherwise <code>false</code>. + +-spec is_c_cons(cerl()) -> boolean(). + +is_c_cons(#c_cons{}) -> + true; +is_c_cons(#c_literal{val = [_ | _]}) -> + true; +is_c_cons(_) -> + false. + + +%% @spec cons_hd(cerl()) -> cerl() +%% +%% @doc Returns the head subtree of an abstract list constructor. +%% +%% @see c_cons/2 + +-spec cons_hd(c_cons() | c_literal()) -> cerl(). + +cons_hd(#c_cons{hd = Head}) -> + Head; +cons_hd(#c_literal{val = [Head | _]}) -> + #c_literal{val = Head}. + + +%% @spec cons_tl(c_cons() | c_literal()) -> cerl() +%% +%% @doc Returns the tail subtree of an abstract list constructor. +%% +%% <p>Recall that the tail does not necessarily represent a proper +%% list.</p> +%% +%% @see c_cons/2 + +-spec cons_tl(c_cons() | c_literal()) -> cerl(). + +cons_tl(#c_cons{tl = Tail}) -> + Tail; +cons_tl(#c_literal{val = [_ | Tail]}) -> + #c_literal{val = Tail}. + + +%% @spec is_c_list(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> represents a +%% proper list, otherwise <code>false</code>. A proper list is either +%% the empty list <code>[]</code>, or a cons cell <code>[<em>Head</em> | +%% <em>Tail</em>]</code>, where recursively <code>Tail</code> is a +%% proper list. +%% +%% <p>Note: Because <code>Node</code> is a syntax tree, the actual +%% run-time values corresponding to its subtrees may often be partially +%% or completely unknown. Thus, if <code>Node</code> represents e.g. +%% "<code>[... | Ns]</code>" (where <code>Ns</code> is a variable), then +%% the function will return <code>false</code>, because it is not known +%% whether <code>Ns</code> will be bound to a list at run-time. If +%% <code>Node</code> instead represents e.g. "<code>[1, 2, 3]</code>" or +%% "<code>[A | []]</code>", then the function will return +%% <code>true</code>.</p> +%% +%% @see c_cons/2 +%% @see c_nil/0 +%% @see list_elements/1 +%% @see list_length/1 + +-spec is_c_list(cerl()) -> boolean(). + +is_c_list(#c_cons{tl = Tail}) -> + is_c_list(Tail); +is_c_list(#c_literal{val = V}) -> + is_proper_list(V); +is_c_list(_) -> + false. + +is_proper_list([_ | Tail]) -> + is_proper_list(Tail); +is_proper_list([]) -> + true; +is_proper_list(_) -> + false. + +%% @spec list_elements(c_cons() | c_literal()) -> [cerl()] +%% +%% @doc Returns the list of element subtrees of an abstract list. +%% <code>Node</code> must represent a proper list. E.g., if +%% <code>Node</code> represents "<code>[<em>X1</em>, <em>X2</em> | +%% [<em>X3</em>, <em>X4</em> | []]</code>", then +%% <code>list_elements(Node)</code> yields the list <code>[X1, X2, X3, +%% X4]</code>. +%% +%% @see c_cons/2 +%% @see c_nil/0 +%% @see is_c_list/1 +%% @see list_length/1 +%% @see make_list/2 + +-spec list_elements(c_cons() | c_literal()) -> [cerl()]. + +list_elements(#c_cons{hd = Head, tl = Tail}) -> + [Head | list_elements(Tail)]; +list_elements(#c_literal{val = V}) -> + abstract_list(V). + +abstract_list([X | Xs]) -> + [abstract(X) | abstract_list(Xs)]; +abstract_list([]) -> + []. + + +%% @spec list_length(Node::c_cons() | c_literal()) -> integer() +%% +%% @doc Returns the number of element subtrees of an abstract list. +%% <code>Node</code> must represent a proper list. E.g., if +%% <code>Node</code> represents "<code>[X1 | [X2, X3 | [X4, X5, +%% X6]]]</code>", then <code>list_length(Node)</code> returns the +%% integer 6. +%% +%% <p>Note: this is equivalent to +%% <code>length(list_elements(Node))</code>, but potentially more +%% efficient.</p> +%% +%% @see c_cons/2 +%% @see c_nil/0 +%% @see is_c_list/1 +%% @see list_elements/1 + +-spec list_length(c_cons() | c_literal()) -> non_neg_integer(). + +list_length(L) -> + list_length(L, 0). + +list_length(#c_cons{tl = Tail}, A) -> + list_length(Tail, A + 1); +list_length(#c_literal{val = V}, A) -> + A + length(V). + + +%% @spec make_list(List) -> Node +%% @equiv make_list(List, none) + +-spec make_list([cerl()]) -> cerl(). + +make_list(List) -> + ann_make_list([], List). + + +%% @spec make_list(List::[cerl()], Tail) -> cerl() +%% +%% Tail = cerl() | none +%% +%% @doc Creates an abstract list from the elements in <code>List</code> +%% and the optional <code>Tail</code>. If <code>Tail</code> is +%% <code>none</code>, the result will represent a nil-terminated list, +%% otherwise it represents "<code>[... | <em>Tail</em>]</code>". +%% +%% @see c_cons/2 +%% @see c_nil/0 +%% @see ann_make_list/3 +%% @see update_list/3 +%% @see list_elements/1 + +-spec make_list([cerl()], cerl() | 'none') -> cerl(). + +make_list(List, Tail) -> + ann_make_list([], List, Tail). + + +%% @spec update_list(Old::cerl(), List::[cerl()]) -> cerl() +%% @equiv update_list(Old, List, none) + +-spec update_list(cerl(), [cerl()]) -> cerl(). + +update_list(Node, List) -> + ann_make_list(get_ann(Node), List). + + +%% @spec update_list(Old::cerl(), List::[cerl()], Tail) -> cerl() +%% +%% Tail = cerl() | none +%% +%% @see make_list/2 +%% @see update_list/2 + +-spec update_list(cerl(), [cerl()], cerl() | 'none') -> cerl(). + +update_list(Node, List, Tail) -> + ann_make_list(get_ann(Node), List, Tail). + + +%% @spec ann_make_list(As::anns(), List::[cerl()]) -> cerl() +%% @equiv ann_make_list(As, List, none) + +-spec ann_make_list(anns(), [cerl()]) -> cerl(). + +ann_make_list(As, List) -> + ann_make_list(As, List, none). + + +%% @spec ann_make_list(As::anns(), List::[cerl()], Tail) -> cerl() +%% +%% Tail = cerl() | none +%% +%% @see make_list/2 +%% @see ann_make_list/2 + +-spec ann_make_list(anns(), [cerl()], cerl() | 'none') -> cerl(). + +ann_make_list(As, [H | T], Tail) -> + ann_c_cons(As, H, make_list(T, Tail)); % `c_cons' folds literals +ann_make_list(As, [], none) -> + ann_c_nil(As); +ann_make_list(_, [], Node) -> + Node. + + +%% --------------------------------------------------------------------- +%% maps + +%% @spec is_c_map(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% map constructor, otherwise <code>false</code>. + +-spec is_c_map(cerl()) -> boolean(). + +is_c_map(#c_map{}) -> + true; +is_c_map(#c_literal{val = V}) when is_map(V) -> + true; +is_c_map(_) -> + false. + +-spec map_es(c_map() | c_literal()) -> [c_map_pair()]. + +map_es(#c_literal{anno=As,val=M}) when is_map(M) -> + [ann_c_map_pair(As, + #c_literal{anno=As,val='assoc'}, + #c_literal{anno=As,val=K}, + #c_literal{anno=As,val=V}) || {K,V} <- maps:to_list(M)]; +map_es(#c_map{es = Es}) -> + Es. + +-spec map_arg(c_map() | c_literal()) -> c_map() | c_literal(). + +map_arg(#c_literal{anno=As,val=M}) when is_map(M) -> + #c_literal{anno=As,val=#{}}; +map_arg(#c_map{arg=M}) -> + M. + +-spec c_map([c_map_pair()]) -> c_map(). + +c_map(Pairs) -> + ann_c_map([], Pairs). + +-spec c_map_pattern([c_map_pair()]) -> c_map(). + +c_map_pattern(Pairs) -> + #c_map{es=Pairs, is_pat=true}. + +-spec ann_c_map_pattern([term()], [c_map_pair()]) -> c_map(). + +ann_c_map_pattern(As, Pairs) -> + #c_map{anno=As, es=Pairs, is_pat=true}. + +-spec is_c_map_empty(c_map() | c_literal()) -> boolean(). + +is_c_map_empty(#c_map{ es=[] }) -> true; +is_c_map_empty(#c_literal{val=M}) when is_map(M),map_size(M) =:= 0 -> true; +is_c_map_empty(_) -> false. + +-spec is_c_map_pattern(c_map()) -> boolean(). + +is_c_map_pattern(#c_map{is_pat=IsPat}) -> + IsPat. + +-spec ann_c_map([term()], [c_map_pair()]) -> c_map() | c_literal(). + +ann_c_map(As, Es) -> + ann_c_map(As, #c_literal{val=#{}}, Es). + +-spec ann_c_map(anns(), c_map() | c_literal(), [c_map_pair()]) -> c_map() | c_literal(). + +ann_c_map(As, #c_literal{val=M}, Es) when is_map(M) -> + fold_map_pairs(As,Es,M); +ann_c_map(As, M, Es) -> + #c_map{arg=M, es=Es, anno=As}. + +fold_map_pairs(As,[],M) -> #c_literal{anno=As,val=M}; +%% M#{ K => V} +fold_map_pairs(As,[#c_map_pair{op=#c_literal{val=assoc},key=Ck,val=Cv}=E|Es],M) -> + case is_lit_list([Ck,Cv]) of + true -> + [K,V] = lit_list_vals([Ck,Cv]), + fold_map_pairs(As,Es,maps:put(K,V,M)); + false -> + #c_map{arg=#c_literal{val=M,anno=As}, es=[E|Es], anno=As} + end; +%% M#{ K := V} +fold_map_pairs(As,[#c_map_pair{op=#c_literal{val=exact},key=Ck,val=Cv}=E|Es],M) -> + case is_lit_list([Ck,Cv]) of + true -> + [K,V] = lit_list_vals([Ck,Cv]), + case maps:is_key(K,M) of + true -> fold_map_pairs(As,Es,maps:put(K,V,M)); + false -> + #c_map{arg=#c_literal{val=M,anno=As}, es=[E|Es], anno=As } + end; + false -> + #c_map{arg=#c_literal{val=M,anno=As}, es=[E|Es], anno=As } + end. + +-spec update_c_map(c_map(), cerl(), [cerl()]) -> c_map() | c_literal(). + +update_c_map(#c_map{is_pat=true}=Old, M, Es) -> + Old#c_map{arg=M, es=Es}; +update_c_map(#c_map{is_pat=false}=Old, M, Es) -> + ann_c_map(get_ann(Old), M, Es). + +map_pair_key(#c_map_pair{key=K}) -> K. +map_pair_val(#c_map_pair{val=V}) -> V. +map_pair_op(#c_map_pair{op=Op}) -> Op. + +-spec c_map_pair(cerl(), cerl()) -> c_map_pair(). + +c_map_pair(Key,Val) -> + #c_map_pair{op=#c_literal{val=assoc},key=Key,val=Val}. + +-spec c_map_pair_exact(cerl(), cerl()) -> c_map_pair(). + +c_map_pair_exact(Key,Val) -> + #c_map_pair{op=#c_literal{val=exact},key=Key,val=Val}. + +-spec ann_c_map_pair(anns(), cerl(), cerl(), cerl()) -> + c_map_pair(). + +ann_c_map_pair(As,Op,K,V) -> + #c_map_pair{op = Op, key = K, val = V, anno = As}. + +update_c_map_pair(Old,Op,K,V) -> + #c_map_pair{op = Op, key = K, val = V, anno = get_ann(Old)}. + + +%% --------------------------------------------------------------------- + +%% @spec c_tuple(Elements::[cerl()]) -> cerl() +%% +%% @doc Creates an abstract tuple. If <code>Elements</code> is +%% <code>[E1, ..., En]</code>, the result represents +%% "<code>{<em>E1</em>, ..., <em>En</em>}</code>". Note that if all +%% nodes in <code>Elements</code> have type <code>literal</code>, or if +%% <code>Elements</code> is empty, then the result will also have type +%% <code>literal</code> and annotations on nodes in +%% <code>Elements</code> are lost. +%% +%% <p>Recall that Erlang has distinct 1-tuples, i.e., <code>{X}</code> +%% is always distinct from <code>X</code> itself.</p> +%% +%% @see ann_c_tuple/2 +%% @see update_c_tuple/2 +%% @see is_c_tuple/1 +%% @see tuple_es/1 +%% @see tuple_arity/1 +%% @see c_tuple_skel/1 + +%% *Always* collapse literals. + +-spec c_tuple([cerl()]) -> c_tuple() | c_literal(). + +c_tuple(Es) -> + case is_lit_list(Es) of + false -> + #c_tuple{es = Es}; + true -> + #c_literal{val = list_to_tuple(lit_list_vals(Es))} + end. + + +%% @spec ann_c_tuple(As::anns(), Elements::[cerl()]) -> cerl() +%% @see c_tuple/1 + +-spec ann_c_tuple(anns(), [cerl()]) -> c_tuple() | c_literal(). + +ann_c_tuple(As, Es) -> + case is_lit_list(Es) of + false -> + #c_tuple{es = Es, anno = As}; + true -> + #c_literal{val = list_to_tuple(lit_list_vals(Es)), anno = As} + end. + + +%% @spec update_c_tuple(Old::cerl(), Elements::[cerl()]) -> cerl() +%% @see c_tuple/1 + +-spec update_c_tuple(c_tuple() | c_literal(), [cerl()]) -> c_tuple() | c_literal(). + +update_c_tuple(Node, Es) -> + case is_lit_list(Es) of + false -> + #c_tuple{es = Es, anno = get_ann(Node)}; + true -> + #c_literal{val = list_to_tuple(lit_list_vals(Es)), + anno = get_ann(Node)} + end. + + +%% @spec c_tuple_skel(Elements::[cerl()]) -> cerl() +%% +%% @doc Creates an abstract tuple skeleton. Does not fold constant +%% literals, i.e., the result always has type <code>tuple</code>, +%% representing "<code>{<em>E1</em>, ..., <em>En</em>}</code>", if +%% <code>Elements</code> is <code>[E1, ..., En]</code>. +%% +%% <p>This function is occasionally useful when it is necessary to have +%% annotations on the subnodes of a tuple node, even when all the +%% subnodes are constant literals. Note however that +%% <code>is_literal/1</code> will yield <code>false</code> and +%% <code>concrete/1</code> will fail if passed the result from this +%% function.</p> +%% +%% <p><code>fold_literal/1</code> can be used to revert a node to the +%% normal-form representation.</p> +%% +%% @see ann_c_tuple_skel/2 +%% @see update_c_tuple_skel/2 +%% @see c_tuple/1 +%% @see tuple_es/1 +%% @see is_c_tuple/1 +%% @see is_literal/1 +%% @see fold_literal/1 +%% @see concrete/1 + +%% *Never* collapse literals. + +-spec c_tuple_skel([cerl()]) -> c_tuple(). + +c_tuple_skel(Es) -> + #c_tuple{es = Es}. + + +%% @spec ann_c_tuple_skel(As::anns(), Elements::[cerl()]) -> cerl() +%% @see c_tuple_skel/1 + +-spec ann_c_tuple_skel(anns(), [cerl()]) -> c_tuple(). + +ann_c_tuple_skel(As, Es) -> + #c_tuple{es = Es, anno = As}. + + +%% @spec update_c_tuple_skel(Old::cerl(), Elements::[cerl()]) -> cerl() +%% @see c_tuple_skel/1 + +-spec update_c_tuple_skel(c_tuple(), [cerl()]) -> c_tuple(). + +update_c_tuple_skel(Old, Es) -> + #c_tuple{es = Es, anno = get_ann(Old)}. + + +%% @spec is_c_tuple(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% tuple, otherwise <code>false</code>. +%% +%% @see c_tuple/1 + +-spec is_c_tuple(cerl()) -> boolean(). + +is_c_tuple(#c_tuple{}) -> + true; +is_c_tuple(#c_literal{val = V}) when is_tuple(V) -> + true; +is_c_tuple(_) -> + false. + + +%% @spec tuple_es(cerl()) -> [cerl()] +%% +%% @doc Returns the list of element subtrees of an abstract tuple. +%% +%% @see c_tuple/1 + +-spec tuple_es(c_tuple() | c_literal()) -> [cerl()]. + +tuple_es(#c_tuple{es = Es}) -> + Es; +tuple_es(#c_literal{val = V}) -> + make_lit_list(tuple_to_list(V)). + + +%% @spec tuple_arity(Node::cerl()) -> integer() +%% +%% @doc Returns the number of element subtrees of an abstract tuple. +%% +%% <p>Note: this is equivalent to <code>length(tuple_es(Node))</code>, +%% but potentially more efficient.</p> +%% +%% @see tuple_es/1 +%% @see c_tuple/1 + +-spec tuple_arity(c_tuple() | c_literal()) -> non_neg_integer(). + +tuple_arity(#c_tuple{es = Es}) -> + length(Es); +tuple_arity(#c_literal{val = V}) when is_tuple(V) -> + tuple_size(V). + + +%% --------------------------------------------------------------------- + +%% @spec c_var(Name::var_name()) -> cerl() +%% +%% var_name() = integer() | atom() | {atom(), arity()} +%% +%% @doc Creates an abstract variable. A variable is identified by its +%% name, given by the <code>Name</code> parameter. +%% +%% <p>If a name is given by a single atom, it should either be a +%% "simple" atom which does not need to be single-quoted in Erlang, or +%% otherwise its print name should correspond to a proper Erlang +%% variable, i.e., begin with an uppercase character or an +%% underscore. Names on the form <code>{A, N}</code> represent +%% function name variables "<code><em>A</em>/<em>N</em></code>"; these +%% are special variables which may be bound only in the function +%% definitions of a module or a <code>letrec</code>. They may not be +%% bound in <code>let</code> expressions and cannot occur in clause +%% patterns. The atom <code>A</code> in a function name may be any +%% atom; the integer <code>N</code> must be nonnegative. The functions +%% <code>c_fname/2</code> etc. are utilities for handling function +%% name variables.</p> +%% +%% <p>When printing variable names, they must have the form of proper +%% Core Erlang variables and function names. E.g., a name represented +%% by an integer such as <code>42</code> could be formatted as +%% "<code>_42</code>", an atom <code>'Xxx'</code> simply as +%% "<code>Xxx</code>", and an atom <code>foo</code> as +%% "<code>_foo</code>". However, one must assure that any two valid +%% distinct names are never mapped to the same strings. Tuples such +%% as <code>{foo, 2}</code> representing function names can simply by +%% formatted as "<code>'foo'/2</code>", with no risk of conflicts.</p> +%% +%% @see ann_c_var/2 +%% @see update_c_var/2 +%% @see is_c_var/1 +%% @see var_name/1 +%% @see c_fname/2 +%% @see c_module/4 +%% @see c_letrec/2 + +-spec c_var(var_name()) -> c_var(). + +c_var(Name) -> + #c_var{name = Name}. + + +%% @spec ann_c_var(As::anns(), Name::var_name()) -> c_var() +%% +%% @see c_var/1 + +-spec ann_c_var(anns(), var_name()) -> c_var(). + +ann_c_var(As, Name) -> + #c_var{name = Name, anno = As}. + +%% @spec update_c_var(Old::cerl(), Name::var_name()) -> c_var() +%% +%% @see c_var/1 + +-spec update_c_var(c_var(), var_name()) -> c_var(). + +update_c_var(Node, Name) -> + #c_var{name = Name, anno = get_ann(Node)}. + + +%% @spec is_c_var(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% variable, otherwise <code>false</code>. +%% +%% @see c_var/1 + +-spec is_c_var(cerl()) -> boolean(). + +is_c_var(#c_var{}) -> + true; +is_c_var(_) -> + false. + + +%% @spec c_fname(Name::atom(), Arity::arity()) -> c_var() +%% @equiv c_var({Name, Arity}) +%% @see fname_id/1 +%% @see fname_arity/1 +%% @see is_c_fname/1 +%% @see ann_c_fname/3 +%% @see update_c_fname/3 + +-spec c_fname(atom(), arity()) -> c_var(). + +c_fname(Atom, Arity) -> + c_var({Atom, Arity}). + + +%% @spec ann_c_fname(As::anns(), Name::atom(), Arity::arity()) -> c_var() +%% +%% @equiv ann_c_var(As, {Atom, Arity}) +%% @see c_fname/2 + +-spec ann_c_fname(anns(), atom(), arity()) -> c_var(). + +ann_c_fname(As, Atom, Arity) -> + ann_c_var(As, {Atom, Arity}). + + +%% @spec update_c_fname(Old::c_var(), Name::atom()) -> c_var() +%% @doc Like <code>update_c_fname/3</code>, but takes the arity from +%% <code>Node</code>. +%% @see update_c_fname/3 +%% @see c_fname/2 + +-spec update_c_fname(c_var(), atom()) -> c_var(). + +update_c_fname(#c_var{name = {_, Arity}, anno = As}, Atom) -> + #c_var{name = {Atom, Arity}, anno = As}. + + +%% @spec update_c_fname(Old::var(), Name::atom(), Arity::arity()) -> c_var() +%% +%% @equiv update_c_var(Old, {Atom, Arity}) +%% @see update_c_fname/2 +%% @see c_fname/2 + +-spec update_c_fname(c_var(), atom(), arity()) -> c_var(). + +update_c_fname(Node, Atom, Arity) -> + update_c_var(Node, {Atom, Arity}). + + +%% @spec is_c_fname(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% function name variable, otherwise <code>false</code>. +%% +%% @see c_fname/2 +%% @see c_var/1 +%% @see var_name/1 + +-spec is_c_fname(cerl()) -> boolean(). + +is_c_fname(#c_var{name = {A, N}}) when is_atom(A), is_integer(N), N >= 0 -> + true; +is_c_fname(_) -> + false. + + +%% @spec var_name(c_var()) -> var_name() +%% +%% @doc Returns the name of an abstract variable. +%% +%% @see c_var/1 + +-spec var_name(c_var()) -> var_name(). + +var_name(Node) -> + Node#c_var.name. + + +%% @spec fname_id(c_var()) -> atom() +%% +%% @doc Returns the identifier part of an abstract function name +%% variable. +%% +%% @see fname_arity/1 +%% @see c_fname/2 + +-spec fname_id(c_var()) -> atom(). + +fname_id(#c_var{name={A,_}}) -> + A. + + +%% @spec fname_arity(c_var()) -> arity() +%% +%% @doc Returns the arity part of an abstract function name variable. +%% +%% @see fname_id/1 +%% @see c_fname/2 + +-spec fname_arity(c_var()) -> arity(). + +fname_arity(#c_var{name={_,N}}) -> + N. + + +%% --------------------------------------------------------------------- + +%% @spec c_values(Elements::[cerl()]) -> c_values() +%% +%% @doc Creates an abstract value list. If <code>Elements</code> is +%% <code>[E1, ..., En]</code>, the result represents +%% "<code><<em>E1</em>, ..., <em>En</em>></code>". +%% +%% @see ann_c_values/2 +%% @see update_c_values/2 +%% @see is_c_values/1 +%% @see values_es/1 +%% @see values_arity/1 + +-spec c_values([cerl()]) -> c_values(). + +c_values(Es) -> + #c_values{es = Es}. + + +%% @spec ann_c_values(As::anns(), Elements::[cerl()]) -> c_values() +%% @see c_values/1 + +-spec ann_c_values(anns(), [cerl()]) -> c_values(). + +ann_c_values(As, Es) -> + #c_values{es = Es, anno = As}. + + +%% @spec update_c_values(Old::cerl(), Elements::[cerl()]) -> c_values() +%% @see c_values/1 + +-spec update_c_values(c_values(), [cerl()]) -> c_values(). + +update_c_values(Node, Es) -> + #c_values{es = Es, anno = get_ann(Node)}. + + +%% @spec is_c_values(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% value list; otherwise <code>false</code>. +%% +%% @see c_values/1 + +-spec is_c_values(cerl()) -> boolean(). + +is_c_values(#c_values{}) -> + true; +is_c_values(_) -> + false. + + +%% @spec values_es(c_values()) -> [cerl()] +%% +%% @doc Returns the list of element subtrees of an abstract value +%% list. +%% +%% @see c_values/1 +%% @see values_arity/1 + +-spec values_es(c_values()) -> [cerl()]. + +values_es(Node) -> + Node#c_values.es. + + +%% @spec values_arity(Node::c_values()) -> non_neg_integer() +%% +%% @doc Returns the number of element subtrees of an abstract value +%% list. +%% +%% <p>Note: This is equivalent to +%% <code>length(values_es(Node))</code>, but potentially more +%% efficient.</p> +%% +%% @see c_values/1 +%% @see values_es/1 + +-spec values_arity(c_values()) -> non_neg_integer(). + +values_arity(Node) -> + length(values_es(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_binary(Segments::[c_bitstr()]) -> c_binary() +%% +%% @doc Creates an abstract binary-template. A binary object is a +%% sequence of 8-bit bytes. It is specified by zero or more bit-string +%% template <em>segments</em> of arbitrary lengths (in number of bits), +%% such that the sum of the lengths is evenly divisible by 8. If +%% <code>Segments</code> is <code>[S1, ..., Sn]</code>, the result +%% represents "<code>#{<em>S1</em>, ..., <em>Sn</em>}#</code>". All the +%% <code>Si</code> must have type <code>bitstr</code>. +%% +%% @see ann_c_binary/2 +%% @see update_c_binary/2 +%% @see is_c_binary/1 +%% @see binary_segments/1 +%% @see c_bitstr/5 + +-spec c_binary([c_bitstr()]) -> c_binary(). + +c_binary(Segments) -> + #c_binary{segments = Segments}. + + +%% @spec ann_c_binary(As::anns(), Segments::[c_bitstr()]) -> c_binary() +%% @see c_binary/1 + +-spec ann_c_binary(anns(), [c_bitstr()]) -> c_binary(). + +ann_c_binary(As, Segments) -> + #c_binary{segments = Segments, anno = As}. + + +%% @spec update_c_binary(Old::cerl(), Segments::[c_bitstr()]) -> cerl() +%% @see c_binary/1 + +-spec update_c_binary(c_binary(), [c_bitstr()]) -> c_binary(). + +update_c_binary(Node, Segments) -> + #c_binary{segments = Segments, anno = get_ann(Node)}. + + +%% @spec is_c_binary(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% binary-template; otherwise <code>false</code>. +%% +%% @see c_binary/1 + +-spec is_c_binary(cerl()) -> boolean(). + +is_c_binary(#c_binary{}) -> + true; +is_c_binary(_) -> + false. + + +%% @spec binary_segments(cerl()) -> [c_bitstr()] +%% +%% @doc Returns the list of segment subtrees of an abstract +%% binary-template. +%% +%% @see c_binary/1 +%% @see c_bitstr/5 + +-spec binary_segments(c_binary()) -> [c_bitstr()]. + +binary_segments(Node) -> + Node#c_binary.segments. + + +%% @spec c_bitstr(Value::cerl(), Size::cerl(), Unit::cerl(), +%% Type::cerl(), Flags::cerl()) -> c_bitstr() +%% +%% @doc Creates an abstract bit-string template. These can only occur as +%% components of an abstract binary-template (see {@link c_binary/1}). +%% The result represents "<code>#<<em>Value</em>>(<em>Size</em>, +%% <em>Unit</em>, <em>Type</em>, <em>Flags</em>)</code>", where +%% <code>Unit</code> must represent a positive integer constant, +%% <code>Type</code> must represent a constant atom (one of +%% <code>'integer'</code>, <code>'float'</code>, or +%% <code>'binary'</code>), and <code>Flags</code> must represent a +%% constant list <code>"[<em>F1</em>, ..., <em>Fn</em>]"</code> where +%% all the <code>Fi</code> are atoms. +%% +%% @see c_binary/1 +%% @see ann_c_bitstr/6 +%% @see update_c_bitstr/6 +%% @see is_c_bitstr/1 +%% @see bitstr_val/1 +%% @see bitstr_size/1 +%% @see bitstr_unit/1 +%% @see bitstr_type/1 +%% @see bitstr_flags/1 + +-spec c_bitstr(cerl(), cerl(), cerl(), cerl(), cerl()) -> c_bitstr(). + +c_bitstr(Val, Size, Unit, Type, Flags) -> + #c_bitstr{val = Val, size = Size, unit = Unit, type = Type, + flags = Flags}. + + +%% @spec c_bitstr(Value::cerl(), Size::cerl(), Type::cerl(), +%% Flags::cerl()) -> c_bitstr() +%% @equiv c_bitstr(Value, Size, abstract(1), Type, Flags) + +-spec c_bitstr(cerl(), cerl(), cerl(), cerl()) -> c_bitstr(). + +c_bitstr(Val, Size, Type, Flags) -> + c_bitstr(Val, Size, abstract(1), Type, Flags). + + +%% @spec c_bitstr(Value::cerl(), Type::cerl(), +%% Flags::cerl()) -> c_bitstr() +%% @equiv c_bitstr(Value, abstract(all), abstract(1), Type, Flags) + +-spec c_bitstr(cerl(), cerl(), cerl()) -> c_bitstr(). + +c_bitstr(Val, Type, Flags) -> + c_bitstr(Val, abstract(all), abstract(1), Type, Flags). + + +%% @spec ann_c_bitstr(As::anns(), Value::cerl(), Size::cerl(), +%% Unit::cerl(), Type::cerl(), Flags::cerl()) -> cerl() +%% @see c_bitstr/5 +%% @see ann_c_bitstr/5 + +-spec ann_c_bitstr(anns(), cerl(), cerl(), cerl(), cerl(), cerl()) -> + c_bitstr(). + +ann_c_bitstr(As, Val, Size, Unit, Type, Flags) -> + #c_bitstr{val = Val, size = Size, unit = Unit, type = Type, + flags = Flags, anno = As}. + +%% @spec ann_c_bitstr(As::anns(), Value::cerl(), Size::cerl(), +%% Type::cerl(), Flags::cerl()) -> c_bitstr() +%% @equiv ann_c_bitstr(As, Value, Size, abstract(1), Type, Flags) + +-spec ann_c_bitstr(anns(), cerl(), cerl(), cerl(), cerl()) -> c_bitstr(). + +ann_c_bitstr(As, Value, Size, Type, Flags) -> + ann_c_bitstr(As, Value, Size, abstract(1), Type, Flags). + + +%% @spec update_c_bitstr(Old::c_bitstr(), Value::cerl(), Size::cerl(), +%% Unit::cerl(), Type::cerl(), Flags::cerl()) -> c_bitstr() +%% @see c_bitstr/5 +%% @see update_c_bitstr/5 + +-spec update_c_bitstr(c_bitstr(), cerl(), cerl(), cerl(), cerl(), cerl()) -> + c_bitstr(). + +update_c_bitstr(Node, Val, Size, Unit, Type, Flags) -> + #c_bitstr{val = Val, size = Size, unit = Unit, type = Type, + flags = Flags, anno = get_ann(Node)}. + + +%% @spec update_c_bitstr(Old::c_bitstr(), Value::cerl(), Size::cerl(), +%% Type::cerl(), Flags::cerl()) -> c_bitstr() +%% @equiv update_c_bitstr(Node, Value, Size, abstract(1), Type, Flags) + +-spec update_c_bitstr(c_bitstr(), cerl(), cerl(), cerl(), cerl()) -> c_bitstr(). + +update_c_bitstr(Node, Value, Size, Type, Flags) -> + update_c_bitstr(Node, Value, Size, abstract(1), Type, Flags). + +%% @spec is_c_bitstr(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% bit-string template; otherwise <code>false</code>. +%% +%% @see c_bitstr/5 + +-spec is_c_bitstr(cerl()) -> boolean(). + +is_c_bitstr(#c_bitstr{}) -> + true; +is_c_bitstr(_) -> + false. + + +%% @spec bitstr_val(c_bitstr()) -> cerl() +%% +%% @doc Returns the value subtree of an abstract bit-string template. +%% +%% @see c_bitstr/5 + +-spec bitstr_val(c_bitstr()) -> cerl(). + +bitstr_val(Node) -> + Node#c_bitstr.val. + + +%% @spec bitstr_size(c_bitstr()) -> cerl() +%% +%% @doc Returns the size subtree of an abstract bit-string template. +%% +%% @see c_bitstr/5 + +-spec bitstr_size(c_bitstr()) -> cerl(). + +bitstr_size(Node) -> + Node#c_bitstr.size. + + +%% @spec bitstr_bitsize(c_bitstr()) -> any | all | utf | integer() +%% +%% @doc Returns the total size in bits of an abstract bit-string +%% template. If the size field is an integer literal, the result is the +%% product of the size and unit values; if the size field is the atom +%% literal <code>all</code>, the atom <code>all</code> is returned. +%% If the size is not a literal, the atom <code>any</code> is returned. +%% +%% @see c_bitstr/5 + +-spec bitstr_bitsize(c_bitstr()) -> 'all' | 'any' | 'utf' | non_neg_integer(). + +bitstr_bitsize(Node) -> + Size = Node#c_bitstr.size, + case is_literal(Size) of + true -> + case concrete(Size) of + all -> + all; + undefined -> + %% just an assertion below + "utf" ++ _ = atom_to_list(concrete(Node#c_bitstr.type)), + utf; + S when is_integer(S) -> + S * concrete(Node#c_bitstr.unit) + end; + false -> + any + end. + + +%% @spec bitstr_unit(c_bitstr()) -> cerl() +%% +%% @doc Returns the unit subtree of an abstract bit-string template. +%% +%% @see c_bitstr/5 + +-spec bitstr_unit(c_bitstr()) -> cerl(). + +bitstr_unit(Node) -> + Node#c_bitstr.unit. + + +%% @spec bitstr_type(c_bitstr()) -> cerl() +%% +%% @doc Returns the type subtree of an abstract bit-string template. +%% +%% @see c_bitstr/5 + +-spec bitstr_type(c_bitstr()) -> cerl(). + +bitstr_type(Node) -> + Node#c_bitstr.type. + + +%% @spec bitstr_flags(c_bitstr()) -> cerl() +%% +%% @doc Returns the flags subtree of an abstract bit-string template. +%% +%% @see c_bitstr/5 + +-spec bitstr_flags(c_bitstr()) -> cerl(). + +bitstr_flags(Node) -> + Node#c_bitstr.flags. + + +%% --------------------------------------------------------------------- + +%% @spec c_fun(Variables::[c_var()], Body::cerl()) -> c_fun() +%% +%% @doc Creates an abstract fun-expression. If <code>Variables</code> +%% is <code>[V1, ..., Vn]</code>, the result represents "<code>fun +%% (<em>V1</em>, ..., <em>Vn</em>) -> <em>Body</em></code>". All the +%% <code>Vi</code> must have type <code>var</code>. +%% +%% @see ann_c_fun/3 +%% @see update_c_fun/3 +%% @see is_c_fun/1 +%% @see fun_vars/1 +%% @see fun_body/1 +%% @see fun_arity/1 + +-spec c_fun([c_var()], cerl()) -> c_fun(). + +c_fun(Variables, Body) -> + #c_fun{vars = Variables, body = Body}. + + +%% @spec ann_c_fun(As::anns(), Variables::[c_var()], Body::cerl()) -> +%% c_fun() +%% @see c_fun/2 + +-spec ann_c_fun(anns(), [c_var()], cerl()) -> c_fun(). + +ann_c_fun(As, Variables, Body) -> + #c_fun{vars = Variables, body = Body, anno = As}. + + +%% @spec update_c_fun(Old::c_fun(), Variables::[c_var()], +%% Body::cerl()) -> c_fun() +%% @see c_fun/2 + +-spec update_c_fun(c_fun(), [c_var()], cerl()) -> c_fun(). + +update_c_fun(Node, Variables, Body) -> + #c_fun{vars = Variables, body = Body, anno = get_ann(Node)}. + + +%% @spec is_c_fun(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% fun-expression, otherwise <code>false</code>. +%% +%% @see c_fun/2 + +-spec is_c_fun(cerl()) -> boolean(). + +is_c_fun(#c_fun{}) -> + true; % Now this is fun! +is_c_fun(_) -> + false. + + +%% @spec fun_vars(c_fun()) -> [c_var()] +%% +%% @doc Returns the list of parameter subtrees of an abstract +%% fun-expression. +%% +%% @see c_fun/2 +%% @see fun_arity/1 + +-spec fun_vars(c_fun()) -> [c_var()]. + +fun_vars(Node) -> + Node#c_fun.vars. + + +%% @spec fun_body(c_fun()) -> cerl() +%% +%% @doc Returns the body subtree of an abstract fun-expression. +%% +%% @see c_fun/2 + +-spec fun_body(c_fun()) -> cerl(). + +fun_body(Node) -> + Node#c_fun.body. + + +%% @spec fun_arity(Node::c_fun()) -> arity() +%% +%% @doc Returns the number of parameter subtrees of an abstract +%% fun-expression. +%% +%% <p>Note: this is equivalent to <code>length(fun_vars(Node))</code>, +%% but potentially more efficient.</p> +%% +%% @see c_fun/2 +%% @see fun_vars/1 + +-spec fun_arity(c_fun()) -> arity(). + +fun_arity(Node) -> + length(fun_vars(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_seq(Argument::cerl(), Body::cerl()) -> c_seq() +%% +%% @doc Creates an abstract sequencing expression. The result +%% represents "<code>do <em>Argument</em> <em>Body</em></code>". +%% +%% @see ann_c_seq/3 +%% @see update_c_seq/3 +%% @see is_c_seq/1 +%% @see seq_arg/1 +%% @see seq_body/1 + +-spec c_seq(cerl(), cerl()) -> c_seq(). + +c_seq(Argument, Body) -> + #c_seq{arg = Argument, body = Body}. + + +%% @spec ann_c_seq(As::anns(), Argument::cerl(), Body::cerl()) -> c_seq() +%% +%% @see c_seq/2 + +-spec ann_c_seq(anns(), cerl(), cerl()) -> c_seq(). + +ann_c_seq(As, Argument, Body) -> + #c_seq{arg = Argument, body = Body, anno = As}. + + +%% @spec update_c_seq(Old::c_seq(), Argument::cerl(), Body::cerl()) -> +%% c_seq() +%% @see c_seq/2 + +-spec update_c_seq(c_seq(), cerl(), cerl()) -> c_seq(). + +update_c_seq(Node, Argument, Body) -> + #c_seq{arg = Argument, body = Body, anno = get_ann(Node)}. + + +%% @spec is_c_seq(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% sequencing expression, otherwise <code>false</code>. +%% +%% @see c_seq/2 + +-spec is_c_seq(cerl()) -> boolean(). + +is_c_seq(#c_seq{}) -> + true; +is_c_seq(_) -> + false. + + +%% @spec seq_arg(c_seq()) -> cerl() +%% +%% @doc Returns the argument subtree of an abstract sequencing +%% expression. +%% +%% @see c_seq/2 + +-spec seq_arg(c_seq()) -> cerl(). + +seq_arg(Node) -> + Node#c_seq.arg. + + +%% @spec seq_body(c_seq()) -> cerl() +%% +%% @doc Returns the body subtree of an abstract sequencing expression. +%% +%% @see c_seq/2 + +-spec seq_body(c_seq()) -> cerl(). + +seq_body(Node) -> + Node#c_seq.body. + + +%% --------------------------------------------------------------------- + +%% @spec c_let(Variables::[c_var()], Argument::cerl(), Body::cerl()) -> +%% c_let() +%% +%% @doc Creates an abstract let-expression. If <code>Variables</code> +%% is <code>[V1, ..., Vn]</code>, the result represents "<code>let +%% <<em>V1</em>, ..., <em>Vn</em>> = <em>Argument</em> in +%% <em>Body</em></code>". All the <code>Vi</code> must have type +%% <code>var</code>. +%% +%% @see ann_c_let/4 +%% @see update_c_let/4 +%% @see is_c_let/1 +%% @see let_vars/1 +%% @see let_arg/1 +%% @see let_body/1 +%% @see let_arity/1 + +-spec c_let([c_var()], cerl(), cerl()) -> c_let(). + +c_let(Variables, Argument, Body) -> + #c_let{vars = Variables, arg = Argument, body = Body}. + + +%% ann_c_let(As, Variables, Argument, Body) -> c_let() +%% @see c_let/3 + +-spec ann_c_let(anns(), [c_var()], cerl(), cerl()) -> c_let(). + +ann_c_let(As, Variables, Argument, Body) -> + #c_let{vars = Variables, arg = Argument, body = Body, anno = As}. + + +%% update_c_let(Old, Variables, Argument, Body) -> c_let() +%% @see c_let/3 + +-spec update_c_let(c_let(), [c_var()], cerl(), cerl()) -> c_let(). + +update_c_let(Node, Variables, Argument, Body) -> + #c_let{vars = Variables, arg = Argument, body = Body, + anno = get_ann(Node)}. + + +%% @spec is_c_let(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% let-expression, otherwise <code>false</code>. +%% +%% @see c_let/3 + +-spec is_c_let(cerl()) -> boolean(). + +is_c_let(#c_let{}) -> + true; +is_c_let(_) -> + false. + + +%% @spec let_vars(c_let()) -> [c_var()] +%% +%% @doc Returns the list of left-hand side variables of an abstract +%% let-expression. +%% +%% @see c_let/3 +%% @see let_arity/1 + +-spec let_vars(c_let()) -> [c_var()]. + +let_vars(Node) -> + Node#c_let.vars. + + +%% @spec let_arg(c_let()) -> cerl() +%% +%% @doc Returns the argument subtree of an abstract let-expression. +%% +%% @see c_let/3 + +-spec let_arg(c_let()) -> cerl(). + +let_arg(Node) -> + Node#c_let.arg. + + +%% @spec let_body(c_let()) -> cerl() +%% +%% @doc Returns the body subtree of an abstract let-expression. +%% +%% @see c_let/3 + +-spec let_body(c_let()) -> cerl(). + +let_body(Node) -> + Node#c_let.body. + + +%% @spec let_arity(Node::c_let()) -> non_neg_integer() +%% +%% @doc Returns the number of left-hand side variables of an abstract +%% let-expression. +%% +%% <p>Note: this is equivalent to <code>length(let_vars(Node))</code>, +%% but potentially more efficient.</p> +%% +%% @see c_let/3 +%% @see let_vars/1 + +-spec let_arity(c_let()) -> non_neg_integer(). + +let_arity(Node) -> + length(let_vars(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_letrec(Definitions::defs(), Body::cerl()) -> c_letrec() +%% +%% @doc Creates an abstract letrec-expression. If +%% <code>Definitions</code> is <code>[{V1, F1}, ..., {Vn, Fn}]</code>, +%% the result represents "<code>letrec <em>V1</em> = <em>F1</em> +%% ... <em>Vn</em> = <em>Fn</em> in <em>Body</em></code>. All the +%% <code>Vi</code> must have type <code>var</code> and represent +%% function names. All the <code>Fi</code> must have type +%% <code>'fun'</code>. +%% +%% @see ann_c_letrec/3 +%% @see update_c_letrec/3 +%% @see is_c_letrec/1 +%% @see letrec_defs/1 +%% @see letrec_body/1 +%% @see letrec_vars/1 + +-spec c_letrec(defs(), cerl()) -> c_letrec(). + +c_letrec(Defs, Body) -> + #c_letrec{defs = Defs, body = Body}. + + +%% @spec ann_c_letrec(As::anns(), Definitions::defs(), +%% Body::cerl()) -> c_letrec() +%% @see c_letrec/2 + +-spec ann_c_letrec(anns(), defs(), cerl()) -> c_letrec(). + +ann_c_letrec(As, Defs, Body) -> + #c_letrec{defs = Defs, body = Body, anno = As}. + + +%% @spec update_c_letrec(Old::c_letrec(), Definitions::defs(), +%% Body::cerl()) -> c_letrec() +%% @see c_letrec/2 + +-spec update_c_letrec(c_letrec(), defs(), cerl()) -> c_letrec(). + +update_c_letrec(Node, Defs, Body) -> + #c_letrec{defs = Defs, body = Body, anno = get_ann(Node)}. + + +%% @spec is_c_letrec(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% letrec-expression, otherwise <code>false</code>. +%% +%% @see c_letrec/2 + +-spec is_c_letrec(cerl()) -> boolean(). + +is_c_letrec(#c_letrec{}) -> + true; +is_c_letrec(_) -> + false. + + +%% @spec letrec_defs(Node::c_letrec()) -> defs() +%% +%% @doc Returns the list of definitions of an abstract +%% letrec-expression. If <code>Node</code> represents "<code>letrec +%% <em>V1</em> = <em>F1</em> ... <em>Vn</em> = <em>Fn</em> in +%% <em>Body</em></code>", the returned value is <code>[{V1, F1}, ..., +%% {Vn, Fn}]</code>. +%% +%% @see c_letrec/2 + +-spec letrec_defs(c_letrec()) -> defs(). + +letrec_defs(Node) -> + Node#c_letrec.defs. + + +%% @spec letrec_body(c_letrec()) -> cerl() +%% +%% @doc Returns the body subtree of an abstract letrec-expression. +%% +%% @see c_letrec/2 + +-spec letrec_body(c_letrec()) -> cerl(). + +letrec_body(Node) -> + Node#c_letrec.body. + + +%% @spec letrec_vars(c_letrec()) -> [cerl()] +%% +%% @doc Returns the list of left-hand side function variable subtrees +%% of a letrec-expression. If <code>Node</code> represents +%% "<code>letrec <em>V1</em> = <em>F1</em> ... <em>Vn</em> = +%% <em>Fn</em> in <em>Body</em></code>", the returned value is +%% <code>[V1, ..., Vn]</code>. +%% +%% @see c_letrec/2 + +-spec letrec_vars(c_letrec()) -> [cerl()]. + +letrec_vars(Node) -> + [F || {F, _} <- letrec_defs(Node)]. + + +%% --------------------------------------------------------------------- + +%% @spec c_case(Argument::cerl(), Clauses::[cerl()]) -> c_case() +%% +%% @doc Creates an abstract case-expression. If <code>Clauses</code> +%% is <code>[C1, ..., Cn]</code>, the result represents "<code>case +%% <em>Argument</em> of <em>C1</em> ... <em>Cn</em> +%% end</code>". <code>Clauses</code> must not be empty. +%% +%% @see ann_c_case/3 +%% @see update_c_case/3 +%% @see is_c_case/1 +%% @see c_clause/3 +%% @see case_arg/1 +%% @see case_clauses/1 +%% @see case_arity/1 + +-spec c_case(cerl(), [cerl()]) -> c_case(). + +c_case(Expr, Clauses) -> + #c_case{arg = Expr, clauses = Clauses}. + + +%% @spec ann_c_case(As::anns(), Argument::cerl(), +%% Clauses::[cerl()]) -> c_case() +%% @see c_case/2 + +-spec ann_c_case(anns(), cerl(), [cerl()]) -> c_case(). + +ann_c_case(As, Expr, Clauses) -> + #c_case{arg = Expr, clauses = Clauses, anno = As}. + + +%% @spec update_c_case(Old::cerl(), Argument::cerl(), +%% Clauses::[cerl()]) -> c_case() +%% @see c_case/2 + +-spec update_c_case(c_case(), cerl(), [cerl()]) -> c_case(). + +update_c_case(Node, Expr, Clauses) -> + #c_case{arg = Expr, clauses = Clauses, anno = get_ann(Node)}. + + +%% is_c_case(Node) -> boolean() +%% +%% Node = cerl() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% case-expression; otherwise <code>false</code>. +%% +%% @see c_case/2 + +-spec is_c_case(cerl()) -> boolean(). + +is_c_case(#c_case{}) -> + true; +is_c_case(_) -> + false. + + +%% @spec case_arg(c_case()) -> cerl() +%% +%% @doc Returns the argument subtree of an abstract case-expression. +%% +%% @see c_case/2 + +-spec case_arg(c_case()) -> cerl(). + +case_arg(Node) -> + Node#c_case.arg. + + +%% @spec case_clauses(c_case()) -> [cerl()] +%% +%% @doc Returns the list of clause subtrees of an abstract +%% case-expression. +%% +%% @see c_case/2 +%% @see case_arity/1 + +-spec case_clauses(c_case()) -> [cerl()]. + +case_clauses(Node) -> + Node#c_case.clauses. + + +%% @spec case_arity(Node::c_case()) -> non_neg_integer() +%% +%% @doc Equivalent to +%% <code>clause_arity(hd(case_clauses(Node)))</code>, but potentially +%% more efficient. +%% +%% @see c_case/2 +%% @see case_clauses/1 +%% @see clause_arity/1 + +-spec case_arity(c_case()) -> non_neg_integer(). + +case_arity(Node) -> + clause_arity(hd(case_clauses(Node))). + + +%% --------------------------------------------------------------------- + +%% @spec c_clause(Patterns::[cerl()], Body::cerl()) -> c_clause() +%% @equiv c_clause(Patterns, c_atom(true), Body) +%% @see c_atom/1 + +-spec c_clause([cerl()], cerl()) -> c_clause(). + +c_clause(Patterns, Body) -> + c_clause(Patterns, c_atom(true), Body). + + +%% @spec c_clause(Patterns::[cerl()], Guard::cerl(), Body::cerl()) -> +%% c_clause() +%% +%% @doc Creates an an abstract clause. If <code>Patterns</code> is +%% <code>[P1, ..., Pn]</code>, the result represents +%% "<code><<em>P1</em>, ..., <em>Pn</em>> when <em>Guard</em> -> +%% <em>Body</em></code>". +%% +%% @see c_clause/2 +%% @see ann_c_clause/4 +%% @see update_c_clause/4 +%% @see is_c_clause/1 +%% @see c_case/2 +%% @see c_receive/3 +%% @see clause_pats/1 +%% @see clause_guard/1 +%% @see clause_body/1 +%% @see clause_arity/1 +%% @see clause_vars/1 + +-spec c_clause([cerl()], cerl(), cerl()) -> c_clause(). + +c_clause(Patterns, Guard, Body) -> + #c_clause{pats = Patterns, guard = Guard, body = Body}. + + +%% @spec ann_c_clause(As::anns(), Patterns::[cerl()], +%% Body::cerl()) -> c_clause() +%% @equiv ann_c_clause(As, Patterns, c_atom(true), Body) +%% @see c_clause/3 + +-spec ann_c_clause(anns(), [cerl()], cerl()) -> c_clause(). + +ann_c_clause(As, Patterns, Body) -> + ann_c_clause(As, Patterns, c_atom(true), Body). + + +%% @spec ann_c_clause(As::anns(), Patterns::[cerl()], Guard::cerl(), +%% Body::cerl()) -> c_clause() +%% @see ann_c_clause/3 +%% @see c_clause/3 + +-spec ann_c_clause(anns(), [cerl()], cerl(), cerl()) -> c_clause(). + +ann_c_clause(As, Patterns, Guard, Body) -> + #c_clause{pats = Patterns, guard = Guard, body = Body, anno = As}. + + +%% @spec update_c_clause(Old::c_clause(), Patterns::[cerl()], +%% Guard::cerl(), Body::cerl()) -> c_clause() +%% @see c_clause/3 + +-spec update_c_clause(c_clause(), [cerl()], cerl(), cerl()) -> c_clause(). + +update_c_clause(Node, Patterns, Guard, Body) -> + #c_clause{pats = Patterns, guard = Guard, body = Body, + anno = get_ann(Node)}. + + +%% @spec is_c_clause(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% clause, otherwise <code>false</code>. +%% +%% @see c_clause/3 + +-spec is_c_clause(cerl()) -> boolean(). + +is_c_clause(#c_clause{}) -> + true; +is_c_clause(_) -> + false. + + +%% @spec clause_pats(c_clause()) -> [cerl()] +%% +%% @doc Returns the list of pattern subtrees of an abstract clause. +%% +%% @see c_clause/3 +%% @see clause_arity/1 + +-spec clause_pats(c_clause()) -> [cerl()]. + +clause_pats(Node) -> + Node#c_clause.pats. + + +%% @spec clause_guard(c_clause()) -> cerl() +%% +%% @doc Returns the guard subtree of an abstract clause. +%% +%% @see c_clause/3 + +-spec clause_guard(c_clause()) -> cerl(). + +clause_guard(Node) -> + Node#c_clause.guard. + + +%% @spec clause_body(c_clause()) -> cerl() +%% +%% @doc Returns the body subtree of an abstract clause. +%% +%% @see c_clause/3 + +-spec clause_body(c_clause()) -> cerl(). + +clause_body(Node) -> + Node#c_clause.body. + + +%% @spec clause_arity(Node::c_clause()) -> non_neg_integer() +%% +%% @doc Returns the number of pattern subtrees of an abstract clause. +%% +%% <p>Note: this is equivalent to +%% <code>length(clause_pats(Node))</code>, but potentially more +%% efficient.</p> +%% +%% @see c_clause/3 +%% @see clause_pats/1 + +-spec clause_arity(c_clause()) -> non_neg_integer(). + +clause_arity(Node) -> + length(clause_pats(Node)). + + +%% @spec clause_vars(c_clause()) -> [cerl()] +%% +%% @doc Returns the list of all abstract variables in the patterns of +%% an abstract clause. The order of listing is not defined. +%% +%% @see c_clause/3 +%% @see pat_list_vars/1 + +-spec clause_vars(c_clause()) -> [cerl()]. + +clause_vars(Clause) -> + pat_list_vars(clause_pats(Clause)). + + +%% @spec pat_vars(Pattern::cerl()) -> [cerl()] +%% +%% @doc Returns the list of all abstract variables in a pattern. An +%% exception is thrown if <code>Node</code> does not represent a +%% well-formed Core Erlang clause pattern. The order of listing is not +%% defined. +%% +%% @see pat_list_vars/1 +%% @see clause_vars/1 + +-spec pat_vars(cerl()) -> [cerl()]. + +pat_vars(Node) -> + pat_vars(Node, []). + +pat_vars(Node, Vs) -> + case type(Node) of + var -> + [Node | Vs]; + literal -> + Vs; + cons -> + pat_vars(cons_hd(Node), pat_vars(cons_tl(Node), Vs)); + tuple -> + pat_list_vars(tuple_es(Node), Vs); + map -> + pat_list_vars(map_es(Node), Vs); + map_pair -> + %% map_pair_key is not a pattern var, excluded + pat_list_vars([map_pair_op(Node),map_pair_val(Node)],Vs); + binary -> + pat_list_vars(binary_segments(Node), Vs); + bitstr -> + %% bitstr_size is not a pattern var, excluded + pat_vars(bitstr_val(Node), Vs); + alias -> + pat_vars(alias_pat(Node), [alias_var(Node) | Vs]) + end. + + +%% @spec pat_list_vars(Patterns::[cerl()]) -> [cerl()] +%% +%% @doc Returns the list of all abstract variables in the given +%% patterns. An exception is thrown if some element in +%% <code>Patterns</code> does not represent a well-formed Core Erlang +%% clause pattern. The order of listing is not defined. +%% +%% @see pat_vars/1 +%% @see clause_vars/1 + +-spec pat_list_vars([cerl()]) -> [cerl()]. + +pat_list_vars(Ps) -> + pat_list_vars(Ps, []). + +pat_list_vars([P | Ps], Vs) -> + pat_list_vars(Ps, pat_vars(P, Vs)); +pat_list_vars([], Vs) -> + Vs. + + +%% --------------------------------------------------------------------- + +%% @spec c_alias(Variable::c_var(), Pattern::cerl()) -> c_alias() +%% +%% @doc Creates an abstract pattern alias. The result represents +%% "<code><em>Variable</em> = <em>Pattern</em></code>". +%% +%% @see ann_c_alias/3 +%% @see update_c_alias/3 +%% @see is_c_alias/1 +%% @see alias_var/1 +%% @see alias_pat/1 +%% @see c_clause/3 + +-spec c_alias(c_var(), cerl()) -> c_alias(). + +c_alias(Var, Pattern) -> + #c_alias{var = Var, pat = Pattern}. + + +%% @spec ann_c_alias(As::anns(), Variable::c_var(), +%% Pattern::cerl()) -> c_alias() +%% @see c_alias/2 + +-spec ann_c_alias(anns(), c_var(), cerl()) -> c_alias(). + +ann_c_alias(As, Var, Pattern) -> + #c_alias{var = Var, pat = Pattern, anno = As}. + + +%% @spec update_c_alias(Old::cerl(), Variable::c_var(), +%% Pattern::cerl()) -> c_alias() +%% @see c_alias/2 + +-spec update_c_alias(c_alias(), c_var(), cerl()) -> c_alias(). + +update_c_alias(Node, Var, Pattern) -> + #c_alias{var = Var, pat = Pattern, anno = get_ann(Node)}. + + +%% @spec is_c_alias(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% pattern alias, otherwise <code>false</code>. +%% +%% @see c_alias/2 + +-spec is_c_alias(cerl()) -> boolean(). + +is_c_alias(#c_alias{}) -> + true; +is_c_alias(_) -> + false. + + +%% @spec alias_var(c_alias()) -> c_var() +%% +%% @doc Returns the variable subtree of an abstract pattern alias. +%% +%% @see c_alias/2 + +-spec alias_var(c_alias()) -> c_var(). + +alias_var(Node) -> + Node#c_alias.var. + + +%% @spec alias_pat(c_alias()) -> cerl() +%% +%% @doc Returns the pattern subtree of an abstract pattern alias. +%% +%% @see c_alias/2 + +-spec alias_pat(c_alias()) -> cerl(). + +alias_pat(Node) -> + Node#c_alias.pat. + + +%% --------------------------------------------------------------------- + +%% @spec c_receive(Clauses::[cerl()]) -> c_receive() +%% @equiv c_receive(Clauses, c_atom(infinity), c_atom(true)) +%% @see c_atom/1 + +-spec c_receive([cerl()]) -> c_receive(). + +c_receive(Clauses) -> + c_receive(Clauses, c_atom(infinity), c_atom(true)). + + +%% @spec c_receive(Clauses::[cerl()], Timeout::cerl(), +%% Action::cerl()) -> c_receive() +%% +%% @doc Creates an abstract receive-expression. If +%% <code>Clauses</code> is <code>[C1, ..., Cn]</code>, the result +%% represents "<code>receive <em>C1</em> ... <em>Cn</em> after +%% <em>Timeout</em> -> <em>Action</em> end</code>". +%% +%% @see c_receive/1 +%% @see ann_c_receive/4 +%% @see update_c_receive/4 +%% @see is_c_receive/1 +%% @see receive_clauses/1 +%% @see receive_timeout/1 +%% @see receive_action/1 + +-spec c_receive([cerl()], cerl(), cerl()) -> c_receive(). + +c_receive(Clauses, Timeout, Action) -> + #c_receive{clauses = Clauses, timeout = Timeout, action = Action}. + + +%% @spec ann_c_receive(As::anns(), Clauses::[cerl()]) -> c_receive() +%% @equiv ann_c_receive(As, Clauses, c_atom(infinity), c_atom(true)) +%% @see c_receive/3 +%% @see c_atom/1 + +-spec ann_c_receive(anns(), [cerl()]) -> c_receive(). + +ann_c_receive(As, Clauses) -> + ann_c_receive(As, Clauses, c_atom(infinity), c_atom(true)). + + +%% @spec ann_c_receive(As::anns(), Clauses::[cerl()], +%% Timeout::cerl(), Action::cerl()) -> c_receive() +%% @see ann_c_receive/2 +%% @see c_receive/3 + +-spec ann_c_receive(anns(), [cerl()], cerl(), cerl()) -> c_receive(). + +ann_c_receive(As, Clauses, Timeout, Action) -> + #c_receive{clauses = Clauses, timeout = Timeout, action = Action, + anno = As}. + + +%% @spec update_c_receive(Old::cerl(), Clauses::[cerl()], +%% Timeout::cerl(), Action::cerl()) -> c_receive() +%% @see c_receive/3 + +-spec update_c_receive(c_receive(), [cerl()], cerl(), cerl()) -> c_receive(). + +update_c_receive(Node, Clauses, Timeout, Action) -> + #c_receive{clauses = Clauses, timeout = Timeout, action = Action, + anno = get_ann(Node)}. + + +%% @spec is_c_receive(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% receive-expression, otherwise <code>false</code>. +%% +%% @see c_receive/3 + +-spec is_c_receive(cerl()) -> boolean(). + +is_c_receive(#c_receive{}) -> + true; +is_c_receive(_) -> + false. + + +%% @spec receive_clauses(c_receive()) -> [cerl()] +%% +%% @doc Returns the list of clause subtrees of an abstract +%% receive-expression. +%% +%% @see c_receive/3 + +-spec receive_clauses(c_receive()) -> [cerl()]. + +receive_clauses(Node) -> + Node#c_receive.clauses. + + +%% @spec receive_timeout(c_receive()) -> cerl() +%% +%% @doc Returns the timeout subtree of an abstract receive-expression. +%% +%% @see c_receive/3 + +-spec receive_timeout(c_receive()) -> cerl(). + +receive_timeout(Node) -> + Node#c_receive.timeout. + + +%% @spec receive_action(c_receive()) -> cerl() +%% +%% @doc Returns the action subtree of an abstract receive-expression. +%% +%% @see c_receive/3 + +-spec receive_action(c_receive()) -> cerl(). + +receive_action(Node) -> + Node#c_receive.action. + + +%% --------------------------------------------------------------------- + +%% @spec c_apply(Operator::c_var(), Arguments::[cerl()]) -> c_apply() +%% +%% @doc Creates an abstract function application. If +%% <code>Arguments</code> is <code>[A1, ..., An]</code>, the result +%% represents "<code>apply <em>Operator</em>(<em>A1</em>, ..., +%% <em>An</em>)</code>". +%% +%% @see ann_c_apply/3 +%% @see update_c_apply/3 +%% @see is_c_apply/1 +%% @see apply_op/1 +%% @see apply_args/1 +%% @see apply_arity/1 +%% @see c_call/3 +%% @see c_primop/2 + +-spec c_apply(c_var(), [cerl()]) -> c_apply(). + +c_apply(Operator, Arguments) -> + #c_apply{op = Operator, args = Arguments}. + + +%% @spec ann_c_apply(As::anns(), Operator::c_var(), +%% Arguments::[cerl()]) -> c_apply() +%% @see c_apply/2 + +-spec ann_c_apply(anns(), c_var(), [cerl()]) -> c_apply(). + +ann_c_apply(As, Operator, Arguments) -> + #c_apply{op = Operator, args = Arguments, anno = As}. + + +%% @spec update_c_apply(Old::c_apply(), Operator::cerl(), +%% Arguments::[cerl()]) -> c_apply() +%% @see c_apply/2 + +-spec update_c_apply(c_apply(), c_var(), [cerl()]) -> c_apply(). + +update_c_apply(Node, Operator, Arguments) -> + #c_apply{op = Operator, args = Arguments, anno = get_ann(Node)}. + + +%% @spec is_c_apply(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% function application, otherwise <code>false</code>. +%% +%% @see c_apply/2 + +-spec is_c_apply(cerl()) -> boolean(). + +is_c_apply(#c_apply{}) -> + true; +is_c_apply(_) -> + false. + + +%% @spec apply_op(c_apply()) -> c_var() +%% +%% @doc Returns the operator subtree of an abstract function +%% application. +%% +%% @see c_apply/2 + +-spec apply_op(c_apply()) -> c_var(). + +apply_op(Node) -> + Node#c_apply.op. + + +%% @spec apply_args(c_apply()) -> [cerl()] +%% +%% @doc Returns the list of argument subtrees of an abstract function +%% application. +%% +%% @see c_apply/2 +%% @see apply_arity/1 + +-spec apply_args(c_apply()) -> [cerl()]. + +apply_args(Node) -> + Node#c_apply.args. + + +%% @spec apply_arity(Node::c_apply()) -> arity() +%% +%% @doc Returns the number of argument subtrees of an abstract +%% function application. +%% +%% <p>Note: this is equivalent to +%% <code>length(apply_args(Node))</code>, but potentially more +%% efficient.</p> +%% +%% @see c_apply/2 +%% @see apply_args/1 + +-spec apply_arity(c_apply()) -> arity(). + +apply_arity(Node) -> + length(apply_args(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_call(Module::cerl(), Name::cerl(), Arguments::[cerl()]) -> +%% c_call() +%% +%% @doc Creates an abstract inter-module call. If +%% <code>Arguments</code> is <code>[A1, ..., An]</code>, the result +%% represents "<code>call <em>Module</em>:<em>Name</em>(<em>A1</em>, +%% ..., <em>An</em>)</code>". +%% +%% @see ann_c_call/4 +%% @see update_c_call/4 +%% @see is_c_call/1 +%% @see call_module/1 +%% @see call_name/1 +%% @see call_args/1 +%% @see call_arity/1 +%% @see c_apply/2 +%% @see c_primop/2 + +-spec c_call(cerl(), cerl(), [cerl()]) -> c_call(). + +c_call(Module, Name, Arguments) -> + #c_call{module = Module, name = Name, args = Arguments}. + + +%% @spec ann_c_call(As::anns(), Module::cerl(), Name::cerl(), +%% Arguments::[cerl()]) -> c_call() +%% @see c_call/3 + +-spec ann_c_call(anns(), cerl(), cerl(), [cerl()]) -> c_call(). + +ann_c_call(As, Module, Name, Arguments) -> + #c_call{module = Module, name = Name, args = Arguments, anno = As}. + + +%% @spec update_c_call(Old::cerl(), Module::cerl(), Name::cerl(), +%% Arguments::[cerl()]) -> c_call() +%% @see c_call/3 + +-spec update_c_call(cerl(), cerl(), cerl(), [cerl()]) -> c_call(). + +update_c_call(Node, Module, Name, Arguments) -> + #c_call{module = Module, name = Name, args = Arguments, + anno = get_ann(Node)}. + + +%% @spec is_c_call(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% inter-module call expression; otherwise <code>false</code>. +%% +%% @see c_call/3 + +-spec is_c_call(cerl()) -> boolean(). + +is_c_call(#c_call{}) -> + true; +is_c_call(_) -> + false. + + +%% @spec call_module(c_call()) -> cerl() +%% +%% @doc Returns the module subtree of an abstract inter-module call. +%% +%% @see c_call/3 + +-spec call_module(c_call()) -> cerl(). + +call_module(Node) -> + Node#c_call.module. + + +%% @spec call_name(c_call()) -> cerl() +%% +%% @doc Returns the name subtree of an abstract inter-module call. +%% +%% @see c_call/3 + +-spec call_name(c_call()) -> cerl(). + +call_name(Node) -> + Node#c_call.name. + + +%% @spec call_args(c_call()) -> [cerl()] +%% +%% @doc Returns the list of argument subtrees of an abstract +%% inter-module call. +%% +%% @see c_call/3 +%% @see call_arity/1 + +-spec call_args(c_call()) -> [cerl()]. + +call_args(Node) -> + Node#c_call.args. + + +%% @spec call_arity(Node::c_call()) -> arity() +%% +%% @doc Returns the number of argument subtrees of an abstract +%% inter-module call. +%% +%% <p>Note: this is equivalent to +%% <code>length(call_args(Node))</code>, but potentially more +%% efficient.</p> +%% +%% @see c_call/3 +%% @see call_args/1 + +-spec call_arity(c_call()) -> arity(). + +call_arity(Node) -> + length(call_args(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_primop(Name::c_literal(), Arguments::[cerl()]) -> c_primop() +%% +%% @doc Creates an abstract primitive operation call. If +%% <code>Arguments</code> is <code>[A1, ..., An]</code>, the result +%% represents "<code>primop <em>Name</em>(<em>A1</em>, ..., +%% <em>An</em>)</code>". <code>Name</code> must be an atom literal. +%% +%% @see ann_c_primop/3 +%% @see update_c_primop/3 +%% @see is_c_primop/1 +%% @see primop_name/1 +%% @see primop_args/1 +%% @see primop_arity/1 +%% @see c_apply/2 +%% @see c_call/3 + +-spec c_primop(c_literal(), [cerl()]) -> c_primop(). + +c_primop(Name, Arguments) -> + #c_primop{name = Name, args = Arguments}. + + +%% @spec ann_c_primop(As::anns(), Name::c_literal(), +%% Arguments::[cerl()]) -> c_primop() +%% @see c_primop/2 + +-spec ann_c_primop(anns(), c_literal(), [cerl()]) -> c_primop(). + +ann_c_primop(As, Name, Arguments) -> + #c_primop{name = Name, args = Arguments, anno = As}. + + +%% @spec update_c_primop(Old::cerl(), Name::c_literal(), +%% Arguments::[cerl()]) -> c_primop() +%% @see c_primop/2 + +-spec update_c_primop(cerl(), c_literal(), [cerl()]) -> c_primop(). + +update_c_primop(Node, Name, Arguments) -> + #c_primop{name = Name, args = Arguments, anno = get_ann(Node)}. + + +%% @spec is_c_primop(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% primitive operation call, otherwise <code>false</code>. +%% +%% @see c_primop/2 + +-spec is_c_primop(cerl()) -> boolean(). + +is_c_primop(#c_primop{}) -> + true; +is_c_primop(_) -> + false. + + +%% @spec primop_name(c_primop()) -> c_literal() +%% +%% @doc Returns the name subtree of an abstract primitive operation +%% call. +%% +%% @see c_primop/2 + +-spec primop_name(c_primop()) -> c_literal(). + +primop_name(Node) -> + Node#c_primop.name. + + +%% @spec primop_args(c_primop()) -> [cerl()] +%% +%% @doc Returns the list of argument subtrees of an abstract primitive +%% operation call. +%% +%% @see c_primop/2 +%% @see primop_arity/1 + +-spec primop_args(c_primop()) -> [cerl()]. + +primop_args(Node) -> + Node#c_primop.args. + + +%% @spec primop_arity(Node::c_primop()) -> arity() +%% +%% @doc Returns the number of argument subtrees of an abstract +%% primitive operation call. +%% +%% <p>Note: this is equivalent to +%% <code>length(primop_args(Node))</code>, but potentially more +%% efficient.</p> +%% +%% @see c_primop/2 +%% @see primop_args/1 + +-spec primop_arity(c_primop()) -> arity(). + +primop_arity(Node) -> + length(primop_args(Node)). + + +%% --------------------------------------------------------------------- + +%% @spec c_try(Argument::cerl(), Variables::[c_var()], Body::cerl(), +%% ExceptionVars::[c_var()], Handler::cerl()) -> c_try() +%% +%% @doc Creates an abstract try-expression. If <code>Variables</code> is +%% <code>[V1, ..., Vn]</code> and <code>ExceptionVars</code> is +%% <code>[X1, ..., Xm]</code>, the result represents "<code>try +%% <em>Argument</em> of <<em>V1</em>, ..., <em>Vn</em>> -> +%% <em>Body</em> catch <<em>X1</em>, ..., <em>Xm</em>> -> +%% <em>Handler</em></code>". All the <code>Vi</code> and <code>Xi</code> +%% must have type <code>var</code>. +%% +%% @see ann_c_try/6 +%% @see update_c_try/6 +%% @see is_c_try/1 +%% @see try_arg/1 +%% @see try_vars/1 +%% @see try_body/1 +%% @see c_catch/1 + +-spec c_try(cerl(), [c_var()], cerl(), [c_var()], cerl()) -> c_try(). + +c_try(Expr, Vs, Body, Evs, Handler) -> + #c_try{arg = Expr, vars = Vs, body = Body, + evars = Evs, handler = Handler}. + + +%% @spec ann_c_try(As::[term()], Expression::cerl(), +%% Variables::[c_var()], Body::cerl(), +%% EVars::[c_var()], Handler::cerl()) -> c_try() +%% @see c_try/5 + +-spec ann_c_try(anns(), cerl(), [c_var()], cerl(), [c_var()], cerl()) -> + c_try(). + +ann_c_try(As, Expr, Vs, Body, Evs, Handler) -> + #c_try{arg = Expr, vars = Vs, body = Body, + evars = Evs, handler = Handler, anno = As}. + + +%% @spec update_c_try(Old::c_try(), Expression::cerl(), +%% Variables::[c_var()], Body::cerl(), +%% EVars::[c_var()], Handler::cerl()) -> cerl() +%% @see c_try/5 + +-spec update_c_try(c_try(), cerl(), [c_var()], cerl(), [c_var()], cerl()) -> + c_try(). + +update_c_try(Node, Expr, Vs, Body, Evs, Handler) -> + #c_try{arg = Expr, vars = Vs, body = Body, + evars = Evs, handler = Handler, anno = get_ann(Node)}. + + +%% @spec is_c_try(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% try-expression, otherwise <code>false</code>. +%% +%% @see c_try/5 + +-spec is_c_try(cerl()) -> boolean(). + +is_c_try(#c_try{}) -> + true; +is_c_try(_) -> + false. + + +%% @spec try_arg(c_try()) -> cerl() +%% +%% @doc Returns the expression subtree of an abstract try-expression. +%% +%% @see c_try/5 + +-spec try_arg(c_try()) -> cerl(). + +try_arg(Node) -> + Node#c_try.arg. + + +%% @spec try_vars(c_try()) -> [c_var()] +%% +%% @doc Returns the list of success variable subtrees of an abstract +%% try-expression. +%% +%% @see c_try/5 + +-spec try_vars(c_try()) -> [c_var()]. + +try_vars(Node) -> + Node#c_try.vars. + + +%% @spec try_body(c_try()) -> cerl() +%% +%% @doc Returns the success body subtree of an abstract try-expression. +%% +%% @see c_try/5 + +-spec try_body(c_try()) -> cerl(). + +try_body(Node) -> + Node#c_try.body. + + +%% @spec try_evars(c_try()) -> [c_var()] +%% +%% @doc Returns the list of exception variable subtrees of an abstract +%% try-expression. +%% +%% @see c_try/5 + +-spec try_evars(c_try()) -> [c_var()]. + +try_evars(Node) -> + Node#c_try.evars. + + +%% @spec try_handler(c_try()) -> cerl() +%% +%% @doc Returns the exception body subtree of an abstract +%% try-expression. +%% +%% @see c_try/5 + +-spec try_handler(c_try()) -> cerl(). + +try_handler(Node) -> + Node#c_try.handler. + + +%% --------------------------------------------------------------------- + +%% @spec c_catch(Body::cerl()) -> c_catch() +%% +%% @doc Creates an abstract catch-expression. The result represents +%% "<code>catch <em>Body</em></code>". +%% +%% <p>Note: catch-expressions can be rewritten as try-expressions, and +%% will eventually be removed from Core Erlang.</p> +%% +%% @see ann_c_catch/2 +%% @see update_c_catch/2 +%% @see is_c_catch/1 +%% @see catch_body/1 +%% @see c_try/5 + +-spec c_catch(cerl()) -> c_catch(). + +c_catch(Body) -> + #c_catch{body = Body}. + + +%% @spec ann_c_catch(As::anns(), Body::cerl()) -> c_catch() +%% @see c_catch/1 + +-spec ann_c_catch(anns(), cerl()) -> c_catch(). + +ann_c_catch(As, Body) -> + #c_catch{body = Body, anno = As}. + + +%% @spec update_c_catch(Old::c_catch(), Body::cerl()) -> c_catch() +%% @see c_catch/1 + +-spec update_c_catch(c_catch(), cerl()) -> c_catch(). + +update_c_catch(Node, Body) -> + #c_catch{body = Body, anno = get_ann(Node)}. + + +%% @spec is_c_catch(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> is an abstract +%% catch-expression, otherwise <code>false</code>. +%% +%% @see c_catch/1 + +-spec is_c_catch(cerl()) -> boolean(). + +is_c_catch(#c_catch{}) -> + true; +is_c_catch(_) -> + false. + + +%% @spec catch_body(Node::c_catch()) -> cerl() +%% +%% @doc Returns the body subtree of an abstract catch-expression. +%% +%% @see c_catch/1 + +-spec catch_body(c_catch()) -> cerl(). + +catch_body(Node) -> + Node#c_catch.body. + + +%% --------------------------------------------------------------------- + +%% @spec to_records(Tree::cerl()) -> record(record_types()) +%% +%% @doc Translates an abstract syntax tree to a corresponding explicit +%% record representation. The records are defined in the file +%% "<code>cerl.hrl</code>". +%% +%% @see type/1 +%% @see from_records/1 + +-spec to_records(cerl()) -> cerl(). + +to_records(Node) -> + Node. + +%% @spec from_records(Tree::record(record_types())) -> cerl() +%% +%% record_types() = c_alias | c_apply | c_binary | c_bitstr | c_call | +%% c_case | c_catch | c_clause | c_cons | c_fun | +%% c_let | c_letrec | c_literal | c_map | c_map_pair | +%% c_module | c_primop | c_receive | c_seq | +%% c_try | c_tuple | c_values | c_var +%% +%% @doc Translates an explicit record representation to a +%% corresponding abstract syntax tree. The records are defined in the +%% file "<code>core_parse.hrl</code>". +%% +%% @see type/1 +%% @see to_records/1 + +-spec from_records(cerl()) -> cerl(). + +from_records(Node) -> + Node. + + +%% --------------------------------------------------------------------- + +%% @spec is_data(Node::cerl()) -> boolean() +%% +%% @doc Returns <code>true</code> if <code>Node</code> represents a +%% data constructor, otherwise <code>false</code>. Data constructors +%% are cons cells, tuples, and atomic literals. +%% +%% @see data_type/1 +%% @see data_es/1 +%% @see data_arity/1 + +-spec is_data(cerl()) -> boolean(). + +is_data(#c_literal{}) -> + true; +is_data(#c_cons{}) -> + true; +is_data(#c_tuple{}) -> + true; +is_data(_) -> + false. + + +%% @spec data_type(Node::cerl()) -> dtype() +%% +%% dtype() = cons | tuple | {atomic, Value} +%% Value = integer() | float() | atom() | [] +%% +%% @doc Returns a type descriptor for a data constructor +%% node. (Cf. <code>is_data/1</code>.) This is mainly useful for +%% comparing types and for constructing new nodes of the same type +%% (cf. <code>make_data/2</code>). If <code>Node</code> represents an +%% integer, floating-point number, atom or empty list, the result is +%% <code>{atomic, Value}</code>, where <code>Value</code> is the value +%% of <code>concrete(Node)</code>, otherwise the result is either +%% <code>cons</code> or <code>tuple</code>. +%% +%% <p>Type descriptors can be compared for equality or order (in the +%% Erlang term order), but remember that floating-point values should +%% in general never be tested for equality.</p> +%% +%% @see is_data/1 +%% @see make_data/2 +%% @see type/1 +%% @see concrete/1 + +-type value() :: integer() | float() | atom() | []. +-type dtype() :: 'cons' | 'tuple' | {'atomic', value()}. +-type c_lct() :: c_literal() | c_cons() | c_tuple(). + +-spec data_type(c_lct()) -> dtype(). + +data_type(#c_literal{val = V}) -> + case V of + [_ | _] -> + cons; + _ when is_tuple(V) -> + tuple; + _ -> + {atomic, V} + end; +data_type(#c_cons{}) -> + cons; +data_type(#c_tuple{}) -> + tuple. + +%% @spec data_es(Node::cerl()) -> [cerl()] +%% +%% @doc Returns the list of subtrees of a data constructor node. If +%% the arity of the constructor is zero, the result is the empty list. +%% +%% <p>Note: if <code>data_type(Node)</code> is <code>cons</code>, the +%% number of subtrees is exactly two. If <code>data_type(Node)</code> +%% is <code>{atomic, Value}</code>, the number of subtrees is +%% zero.</p> +%% +%% @see is_data/1 +%% @see data_type/1 +%% @see data_arity/1 +%% @see make_data/2 + +-spec data_es(c_lct()) -> [cerl()]. + +data_es(#c_literal{val = V}) -> + case V of + [Head | Tail] -> + [#c_literal{val = Head}, #c_literal{val = Tail}]; + _ when is_tuple(V) -> + make_lit_list(tuple_to_list(V)); + _ -> + [] + end; +data_es(#c_cons{hd = H, tl = T}) -> + [H, T]; +data_es(#c_tuple{es = Es}) -> + Es. + +%% @spec data_arity(Node::cerl()) -> non_neg_integer() +%% +%% @doc Returns the number of subtrees of a data constructor +%% node. This is equivalent to <code>length(data_es(Node))</code>, but +%% potentially more efficient. +%% +%% @see is_data/1 +%% @see data_es/1 + +-spec data_arity(c_lct()) -> non_neg_integer(). + +data_arity(#c_literal{val = V}) -> + case V of + [_ | _] -> + 2; + _ when is_tuple(V) -> + tuple_size(V); + _ -> + 0 + end; +data_arity(#c_cons{}) -> + 2; +data_arity(#c_tuple{es = Es}) -> + length(Es). + + +%% @spec make_data(Type::dtype(), Elements::[cerl()]) -> cerl() +%% +%% @doc Creates a data constructor node with the specified type and +%% subtrees. (Cf. <code>data_type/1</code>.) An exception is thrown +%% if the length of <code>Elements</code> is invalid for the given +%% <code>Type</code>; see <code>data_es/1</code> for arity constraints +%% on constructor types. +%% +%% @see data_type/1 +%% @see data_es/1 +%% @see ann_make_data/3 +%% @see update_data/3 +%% @see make_data_skel/2 + +-spec make_data(dtype(), [cerl()]) -> c_lct(). + +make_data(CType, Es) -> + ann_make_data([], CType, Es). + + +%% @spec ann_make_data(As::anns(), Type::dtype(), +%% Elements::[cerl()]) -> cerl() +%% @see make_data/2 + +-spec ann_make_data(anns(), dtype(), [cerl()]) -> c_lct(). + +ann_make_data(As, {atomic, V}, []) -> #c_literal{val = V, anno = As}; +ann_make_data(As, cons, [H, T]) -> ann_c_cons(As, H, T); +ann_make_data(As, tuple, Es) -> ann_c_tuple(As, Es). + +%% @spec update_data(Old::cerl(), Type::dtype(), +%% Elements::[cerl()]) -> cerl() +%% @see make_data/2 + +-spec update_data(cerl(), dtype(), [cerl()]) -> c_lct(). + +update_data(Node, CType, Es) -> + ann_make_data(get_ann(Node), CType, Es). + + +%% @spec make_data_skel(Type::dtype(), Elements::[cerl()]) -> cerl() +%% +%% @doc Like <code>make_data/2</code>, but analogous to +%% <code>c_tuple_skel/1</code> and <code>c_cons_skel/2</code>. +%% +%% @see ann_make_data_skel/3 +%% @see update_data_skel/3 +%% @see make_data/2 +%% @see c_tuple_skel/1 +%% @see c_cons_skel/2 + +-spec make_data_skel(dtype(), [cerl()]) -> c_lct(). + +make_data_skel(CType, Es) -> + ann_make_data_skel([], CType, Es). + + +%% @spec ann_make_data_skel(As::anns(), Type::dtype(), +%% Elements::[cerl()]) -> cerl() +%% @see make_data_skel/2 + +-spec ann_make_data_skel(anns(), dtype(), [cerl()]) -> c_lct(). + +ann_make_data_skel(As, {atomic, V}, []) -> #c_literal{val = V, anno = As}; +ann_make_data_skel(As, cons, [H, T]) -> ann_c_cons_skel(As, H, T); +ann_make_data_skel(As, tuple, Es) -> ann_c_tuple_skel(As, Es). + + +%% @spec update_data_skel(Old::cerl(), Type::dtype(), +%% Elements::[cerl()]) -> cerl() +%% @see make_data_skel/2 + +-spec update_data_skel(cerl(), dtype(), [cerl()]) -> c_lct(). + +update_data_skel(Node, CType, Es) -> + ann_make_data_skel(get_ann(Node), CType, Es). + + +%% --------------------------------------------------------------------- + +%% @spec subtrees(Node::cerl()) -> [[cerl()]] +%% +%% @doc Returns the grouped list of all subtrees of a node. If +%% <code>Node</code> is a leaf node (cf. <code>is_leaf/1</code>), this +%% is the empty list, otherwise the result is always a nonempty list, +%% containing the lists of subtrees of <code>Node</code>, in +%% left-to-right order as they occur in the printed program text, and +%% grouped by category. Often, each group contains only a single +%% subtree. +%% +%% <p>Depending on the type of <code>Node</code>, the size of some +%% groups may be variable (e.g., the group consisting of all the +%% elements of a tuple), while others always contain the same number +%% of elements - usually exactly one (e.g., the group containing the +%% argument expression of a case-expression). Note, however, that the +%% exact structure of the returned list (for a given node type) should +%% in general not be depended upon, since it might be subject to +%% change without notice.</p> +%% +%% <p>The function <code>subtrees/1</code> and the constructor functions +%% <code>make_tree/2</code> and <code>update_tree/2</code> can be a +%% great help if one wants to traverse a syntax tree, visiting all its +%% subtrees, but treat nodes of the tree in a uniform way in most or all +%% cases. Using these functions makes this simple, and also assures that +%% your code is not overly sensitive to extensions of the syntax tree +%% data type, because any node types not explicitly handled by your code +%% can be left to a default case.</p> +%% +%% <p>For example: +%% <pre> +%% postorder(F, Tree) -> +%% F(case subtrees(Tree) of +%% [] -> Tree; +%% List -> update_tree(Tree, +%% [[postorder(F, Subtree) +%% || Subtree <- Group] +%% || Group <- List]) +%% end). +%% </pre> +%% maps the function <code>F</code> on <code>Tree</code> and all its +%% subtrees, doing a post-order traversal of the syntax tree. (Note +%% the use of <code>update_tree/2</code> to preserve annotations.) For +%% a simple function like: +%% <pre> +%% f(Node) -> +%% case type(Node) of +%% atom -> atom("a_" ++ atom_name(Node)); +%% _ -> Node +%% end. +%% </pre> +%% the call <code>postorder(fun f/1, Tree)</code> will yield a new +%% representation of <code>Tree</code> in which all atom names have +%% been extended with the prefix "a_", but nothing else (including +%% annotations) has been changed.</p> +%% +%% @see is_leaf/1 +%% @see make_tree/2 +%% @see update_tree/2 + +-spec subtrees(cerl()) -> [[cerl()]]. + +subtrees(T) -> + case is_leaf(T) of + true -> + []; + false -> + case type(T) of + values -> + [values_es(T)]; + binary -> + [binary_segments(T)]; + bitstr -> + [[bitstr_val(T)], [bitstr_size(T)], + [bitstr_unit(T)], [bitstr_type(T)], + [bitstr_flags(T)]]; + cons -> + [[cons_hd(T)], [cons_tl(T)]]; + tuple -> + [tuple_es(T)]; + map -> + [map_es(T)]; + map_pair -> + [[map_pair_op(T)],[map_pair_key(T)],[map_pair_val(T)]]; + 'let' -> + [let_vars(T), [let_arg(T)], [let_body(T)]]; + seq -> + [[seq_arg(T)], [seq_body(T)]]; + apply -> + [[apply_op(T)], apply_args(T)]; + call -> + [[call_module(T)], [call_name(T)], + call_args(T)]; + primop -> + [[primop_name(T)], primop_args(T)]; + 'case' -> + [[case_arg(T)], case_clauses(T)]; + clause -> + [clause_pats(T), [clause_guard(T)], + [clause_body(T)]]; + alias -> + [[alias_var(T)], [alias_pat(T)]]; + 'fun' -> + [fun_vars(T), [fun_body(T)]]; + 'receive' -> + [receive_clauses(T), [receive_timeout(T)], + [receive_action(T)]]; + 'try' -> + [[try_arg(T)], try_vars(T), [try_body(T)], + try_evars(T), [try_handler(T)]]; + 'catch' -> + [[catch_body(T)]]; + letrec -> + Es = unfold_tuples(letrec_defs(T)), + [Es, [letrec_body(T)]]; + module -> + As = unfold_tuples(module_attrs(T)), + Es = unfold_tuples(module_defs(T)), + [[module_name(T)], module_exports(T), As, Es] + end + end. + + +%% @spec update_tree(Old::cerl(), Groups::[[cerl()]]) -> cerl() +%% +%% @doc Creates a syntax tree with the given subtrees, and the same +%% type and annotations as the <code>Old</code> node. This is +%% equivalent to <code>ann_make_tree(get_ann(Node), type(Node), +%% Groups)</code>, but potentially more efficient. +%% +%% @see update_tree/3 +%% @see ann_make_tree/3 +%% @see get_ann/1 +%% @see type/1 + +-spec update_tree(cerl(), [[cerl()],...]) -> cerl(). + +update_tree(Node, Gs) -> + ann_make_tree(get_ann(Node), type(Node), Gs). + + +%% @spec update_tree(Old::cerl(), Type::ctype(), Groups::[[cerl()]]) -> +%% cerl() +%% +%% @doc Creates a syntax tree with the given type and subtrees, and +%% the same annotations as the <code>Old</code> node. This is +%% equivalent to <code>ann_make_tree(get_ann(Node), Type, +%% Groups)</code>, but potentially more efficient. +%% +%% @see update_tree/2 +%% @see ann_make_tree/3 +%% @see get_ann/1 + +-spec update_tree(cerl(), ctype(), [[cerl()],...]) -> cerl(). + +update_tree(Node, Type, Gs) -> + ann_make_tree(get_ann(Node), Type, Gs). + + +%% @spec make_tree(Type::ctype(), Groups::[[cerl()]]) -> cerl() +%% +%% @doc Creates a syntax tree with the given type and subtrees. +%% <code>Type</code> must be a node type name +%% (cf. <code>type/1</code>) that does not denote a leaf node type +%% (cf. <code>is_leaf/1</code>). <code>Groups</code> must be a +%% <em>nonempty</em> list of groups of syntax trees, representing the +%% subtrees of a node of the given type, in left-to-right order as +%% they would occur in the printed program text, grouped by category +%% as done by <code>subtrees/1</code>. +%% +%% <p>The result of <code>ann_make_tree(get_ann(Node), type(Node), +%% subtrees(Node))</code> (cf. <code>update_tree/2</code>) represents +%% the same source code text as the original <code>Node</code>, +%% assuming that <code>subtrees(Node)</code> yields a nonempty +%% list. However, it does not necessarily have the exact same data +%% representation as <code>Node</code>.</p> +%% +%% @see ann_make_tree/3 +%% @see type/1 +%% @see is_leaf/1 +%% @see subtrees/1 +%% @see update_tree/2 + +-spec make_tree(ctype(), [[cerl()],...]) -> cerl(). + +make_tree(Type, Gs) -> + ann_make_tree([], Type, Gs). + + +%% @spec ann_make_tree(As::anns(), Type::ctype(), +%% Groups::[[cerl()]]) -> cerl() +%% +%% @doc Creates a syntax tree with the given annotations, type and +%% subtrees. See <code>make_tree/2</code> for details. +%% +%% @see make_tree/2 + +-spec ann_make_tree(anns(), ctype(), [[cerl()],...]) -> cerl(). + +ann_make_tree(As, values, [Es]) -> ann_c_values(As, Es); +ann_make_tree(As, binary, [Ss]) -> ann_c_binary(As, Ss); +ann_make_tree(As, bitstr, [[V],[S],[U],[T],[Fs]]) -> + ann_c_bitstr(As, V, S, U, T, Fs); +ann_make_tree(As, cons, [[H], [T]]) -> ann_c_cons(As, H, T); +ann_make_tree(As, tuple, [Es]) -> ann_c_tuple(As, Es); +ann_make_tree(As, map, [Es]) -> ann_c_map(As, Es); +ann_make_tree(As, map, [[A], Es]) -> ann_c_map(As, A, Es); +ann_make_tree(As, map_pair, [[Op], [K], [V]]) -> ann_c_map_pair(As, Op, K, V); +ann_make_tree(As, 'let', [Vs, [A], [B]]) -> ann_c_let(As, Vs, A, B); +ann_make_tree(As, seq, [[A], [B]]) -> ann_c_seq(As, A, B); +ann_make_tree(As, apply, [[Op], Es]) -> ann_c_apply(As, Op, Es); +ann_make_tree(As, call, [[M], [N], Es]) -> ann_c_call(As, M, N, Es); +ann_make_tree(As, primop, [[N], Es]) -> ann_c_primop(As, N, Es); +ann_make_tree(As, 'case', [[A], Cs]) -> ann_c_case(As, A, Cs); +ann_make_tree(As, clause, [Ps, [G], [B]]) -> ann_c_clause(As, Ps, G, B); +ann_make_tree(As, alias, [[V], [P]]) -> ann_c_alias(As, V, P); +ann_make_tree(As, 'fun', [Vs, [B]]) -> ann_c_fun(As, Vs, B); +ann_make_tree(As, 'receive', [Cs, [T], [A]]) -> + ann_c_receive(As, Cs, T, A); +ann_make_tree(As, 'try', [[E], Vs, [B], Evs, [H]]) -> + ann_c_try(As, E, Vs, B, Evs, H); +ann_make_tree(As, 'catch', [[B]]) -> ann_c_catch(As, B); +ann_make_tree(As, letrec, [Es, [B]]) -> + ann_c_letrec(As, fold_tuples(Es), B); +ann_make_tree(As, module, [[N], Xs, Es, Ds]) -> + ann_c_module(As, N, Xs, fold_tuples(Es), fold_tuples(Ds)). + + +%% --------------------------------------------------------------------- + +%% @spec meta(Tree::cerl()) -> cerl() +%% +%% @doc Creates a meta-representation of a syntax tree. The result +%% represents an Erlang expression "<code><em>MetaTree</em></code>" +%% which, if evaluated, will yield a new syntax tree representing the +%% same source code text as <code>Tree</code> (although the actual +%% data representation may be different). The expression represented +%% by <code>MetaTree</code> is <em>implementation independent</em> +%% with regard to the data structures used by the abstract syntax tree +%% implementation. +%% +%% <p>Any node in <code>Tree</code> whose node type is +%% <code>var</code> (cf. <code>type/1</code>), and whose list of +%% annotations (cf. <code>get_ann/1</code>) contains the atom +%% <code>meta_var</code>, will remain unchanged in the resulting tree, +%% except that exactly one occurrence of <code>meta_var</code> is +%% removed from its annotation list.</p> +%% +%% <p>The main use of the function <code>meta/1</code> is to transform +%% a data structure <code>Tree</code>, which represents a piece of +%% program code, into a form that is <em>representation independent +%% when printed</em>. E.g., suppose <code>Tree</code> represents a +%% variable named "V". Then (assuming a function <code>print/1</code> +%% for printing syntax trees), evaluating +%% <code>print(abstract(Tree))</code> - simply using +%% <code>abstract/1</code> to map the actual data structure onto a +%% syntax tree representation - would output a string that might look +%% something like "<code>{var, ..., 'V'}</code>", which is obviously +%% dependent on the implementation of the abstract syntax trees. This +%% could e.g. be useful for caching a syntax tree in a file. However, +%% in some situations like in a program generator generator (with two +%% "generator"), it may be unacceptable. Using +%% <code>print(meta(Tree))</code> instead would output a +%% <em>representation independent</em> syntax tree generating +%% expression; in the above case, something like +%% "<code>cerl:c_var('V')</code>".</p> +%% +%% <p>The implementation tries to generate compact code with respect +%% to literals and lists.</p> +%% +%% @see abstract/1 +%% @see type/1 +%% @see get_ann/1 + +-spec meta(cerl()) -> cerl(). + +meta(Node) -> + %% First of all we check for metavariables: + case type(Node) of + var -> + case lists:member(meta_var, get_ann(Node)) of + false -> + meta_0(var, Node); + true -> + %% A meta-variable: remove the first found + %% 'meta_var' annotation, but otherwise leave + %% the node unchanged. + set_ann(Node, lists:delete(meta_var, get_ann(Node))) + end; + Type -> + meta_0(Type, Node) + end. + +meta_0(Type, Node) -> + case get_ann(Node) of + [] -> + meta_1(Type, Node); + As -> + meta_call(set_ann, [meta_1(Type, Node), abstract(As)]) + end. + +meta_1(literal, Node) -> + %% We handle atomic literals separately, to get a bit + %% more compact code. For the rest, we use 'abstract'. + case concrete(Node) of + V when is_atom(V) -> + meta_call(c_atom, [Node]); + V when is_integer(V) -> + meta_call(c_int, [Node]); + V when is_float(V) -> + meta_call(c_float, [Node]); + [] -> + meta_call(c_nil, []); + _ -> + meta_call(abstract, [Node]) + end; +meta_1(var, Node) -> + %% A normal variable or function name. + meta_call(c_var, [abstract(var_name(Node))]); +meta_1(values, Node) -> + meta_call(c_values, + [make_list(meta_list(values_es(Node)))]); +meta_1(binary, Node) -> + meta_call(c_binary, + [make_list(meta_list(binary_segments(Node)))]); +meta_1(bitstr, Node) -> + meta_call(c_bitstr, + [meta(bitstr_val(Node)), + meta(bitstr_size(Node)), + meta(bitstr_unit(Node)), + meta(bitstr_type(Node)), + meta(bitstr_flags(Node))]); +meta_1(cons, Node) -> + %% The list is split up if some sublist has annotatations. If + %% we get exactly one element, we generate a 'c_cons' call + %% instead of 'make_list' to reconstruct the node. + case split_list(Node) of + {[H], Node1} -> + meta_call(c_cons, [meta(H), meta(Node1)]); + {L, Node1} -> + meta_call(make_list, + [make_list(meta_list(L)), meta(Node1)]) + end; +meta_1(tuple, Node) -> + meta_call(c_tuple, + [make_list(meta_list(tuple_es(Node)))]); +meta_1('let', Node) -> + meta_call(c_let, + [make_list(meta_list(let_vars(Node))), + meta(let_arg(Node)), meta(let_body(Node))]); +meta_1(seq, Node) -> + meta_call(c_seq, + [meta(seq_arg(Node)), meta(seq_body(Node))]); +meta_1(apply, Node) -> + meta_call(c_apply, + [meta(apply_op(Node)), + make_list(meta_list(apply_args(Node)))]); +meta_1(call, Node) -> + meta_call(c_call, + [meta(call_module(Node)), meta(call_name(Node)), + make_list(meta_list(call_args(Node)))]); +meta_1(primop, Node) -> + meta_call(c_primop, + [meta(primop_name(Node)), + make_list(meta_list(primop_args(Node)))]); +meta_1('case', Node) -> + meta_call(c_case, + [meta(case_arg(Node)), + make_list(meta_list(case_clauses(Node)))]); +meta_1(clause, Node) -> + meta_call(c_clause, + [make_list(meta_list(clause_pats(Node))), + meta(clause_guard(Node)), + meta(clause_body(Node))]); +meta_1(alias, Node) -> + meta_call(c_alias, + [meta(alias_var(Node)), meta(alias_pat(Node))]); +meta_1('fun', Node) -> + meta_call(c_fun, + [make_list(meta_list(fun_vars(Node))), + meta(fun_body(Node))]); +meta_1('receive', Node) -> + meta_call(c_receive, + [make_list(meta_list(receive_clauses(Node))), + meta(receive_timeout(Node)), + meta(receive_action(Node))]); +meta_1('try', Node) -> + meta_call(c_try, + [meta(try_arg(Node)), + make_list(meta_list(try_vars(Node))), + meta(try_body(Node)), + make_list(meta_list(try_evars(Node))), + meta(try_handler(Node))]); +meta_1('catch', Node) -> + meta_call(c_catch, [meta(catch_body(Node))]); +meta_1(letrec, Node) -> + meta_call(c_letrec, + [make_list([c_tuple([meta(N), meta(F)]) + || {N, F} <- letrec_defs(Node)]), + meta(letrec_body(Node))]); +meta_1(module, Node) -> + meta_call(c_module, + [meta(module_name(Node)), + make_list(meta_list(module_exports(Node))), + make_list([c_tuple([meta(A), meta(V)]) + || {A, V} <- module_attrs(Node)]), + make_list([c_tuple([meta(N), meta(F)]) + || {N, F} <- module_defs(Node)])]). + +meta_call(F, As) -> + c_call(c_atom(?MODULE), c_atom(F), As). + +meta_list([T | Ts]) -> + [meta(T) | meta_list(Ts)]; +meta_list([]) -> + []. + +split_list(Node) -> + split_list(set_ann(Node, []), []). + +split_list(Node, L) -> + A = get_ann(Node), + case type(Node) of + cons when A =:= [] -> + split_list(cons_tl(Node), [cons_hd(Node) | L]); + _ -> + {lists:reverse(L), Node} + end. + + +%% --------------------------------------------------------------------- + +%% General utilities + +is_lit_list([#c_literal{} | Es]) -> + is_lit_list(Es); +is_lit_list([_ | _]) -> + false; +is_lit_list([]) -> + true. + +lit_list_vals([#c_literal{val = V} | Es]) -> + [V | lit_list_vals(Es)]; +lit_list_vals([]) -> + []. + +-spec make_lit_list([litval()]) -> [c_literal()]. + +make_lit_list([V | Vs]) -> + [#c_literal{val = V} | make_lit_list(Vs)]; +make_lit_list([]) -> + []. + +%% The following tests are the same as done by 'io_lib:char_list' and +%% 'io_lib:printable_list', respectively, but for a single character. + +is_char_value(V) when V >= $\000, V =< $\377 -> true; +is_char_value(_) -> false. + +is_print_char_value(V) when V >= $\040, V =< $\176 -> true; +is_print_char_value(V) when V >= $\240, V =< $\377 -> true; +is_print_char_value(V) when V =:= $\b -> true; +is_print_char_value(V) when V =:= $\d -> true; +is_print_char_value(V) when V =:= $\e -> true; +is_print_char_value(V) when V =:= $\f -> true; +is_print_char_value(V) when V =:= $\n -> true; +is_print_char_value(V) when V =:= $\r -> true; +is_print_char_value(V) when V =:= $\s -> true; +is_print_char_value(V) when V =:= $\t -> true; +is_print_char_value(V) when V =:= $\v -> true; +is_print_char_value(V) when V =:= $\" -> true; +is_print_char_value(V) when V =:= $\' -> true; %' stupid Emacs. +is_print_char_value(V) when V =:= $\\ -> true; +is_print_char_value(_) -> false. + +is_char_list([V | Vs]) when is_integer(V) -> + is_char_value(V) andalso is_char_list(Vs); +is_char_list([]) -> + true; +is_char_list(_) -> + false. + +is_print_char_list([V | Vs]) when is_integer(V) -> + is_print_char_value(V) andalso is_print_char_list(Vs); +is_print_char_list([]) -> + true; +is_print_char_list(_) -> + false. + +unfold_tuples([{X, Y} | Ps]) -> + [X, Y | unfold_tuples(Ps)]; +unfold_tuples([]) -> + []. + +fold_tuples([X, Y | Es]) -> + [{X, Y} | fold_tuples(Es)]; +fold_tuples([]) -> + []. |