aboutsummaryrefslogtreecommitdiffstats
path: root/lib/diameter/src/app
diff options
context:
space:
mode:
Diffstat (limited to 'lib/diameter/src/app')
-rw-r--r--lib/diameter/src/app/diameter_service.erl83
1 files changed, 34 insertions, 49 deletions
diff --git a/lib/diameter/src/app/diameter_service.erl b/lib/diameter/src/app/diameter_service.erl
index 0569d595b9..6498143e2e 100644
--- a/lib/diameter/src/app/diameter_service.erl
+++ b/lib/diameter/src/app/diameter_service.erl
@@ -1688,9 +1688,9 @@ recv_request({Id, Alias}, T, TPid, Apps, Caps, Pkt) ->
%% DIAMETER_APPLICATION_UNSUPPORTED 3007
%% A request was sent for an application that is not supported.
-recv_request(false, {_, OH, OR}, TPid, _, _, Pkt) ->
- ?LOG({error, application}, Pkt),
- reply(answer_message({OH, OR, 3007}, collect_avps(Pkt)), ?BASE, TPid, Pkt).
+recv_request(false, T, TPid, _, _, Pkt) ->
+ As = collect_avps(Pkt),
+ protocol_error(3007, T, TPid, Pkt#diameter_packet{avps = As}).
collect_avps(Pkt) ->
case diameter_codec:collect_avps(Pkt) of
@@ -1709,13 +1709,9 @@ collect_avps(Pkt) ->
%% set to an unrecognized value, or that is inconsistent with the
%% AVP's definition.
%%
-recv_request({_, OH, OR}, {TPid, _}, _, #diameter_packet{errors = [Bs | _],
- bin = Bin,
- avps = Avps}
- = Pkt)
+recv_request(T, {TPid, _}, _, #diameter_packet{errors = [Bs | _]} = Pkt)
when is_bitstring(Bs) ->
- ?LOG({error, invalid_avp_bits}, Bin),
- reply(answer_message({OH, OR, 3009}, Avps), ?BASE, TPid, Pkt);
+ protocol_error(3009, T, TPid, Pkt);
%% Either we support this application but don't recognize the command
%% or we're a relay and the command isn't proxiable.
@@ -1725,18 +1721,15 @@ recv_request({_, OH, OR}, {TPid, _}, _, #diameter_packet{errors = [Bs | _],
%% recognize or support. This MUST be used when a Diameter node
%% receives an experimental command that it does not understand.
%%
-recv_request({_, OH, OR},
+recv_request(T,
{TPid, _},
#diameter_app{id = Id},
#diameter_packet{header = #diameter_header{is_proxiable = P},
- msg = M,
- avps = Avps,
- bin = Bin}
+ msg = M}
= Pkt)
when ?APP_ID_RELAY /= Id, undefined == M;
?APP_ID_RELAY == Id, not P ->
- ?LOG({error, command_unsupported}, Bin),
- reply(answer_message({OH, OR, 3001}, Avps), ?BASE, TPid, Pkt);
+ protocol_error(3001, T, TPid, Pkt);
%% Error bit was set on a request.
%%
@@ -1745,15 +1738,12 @@ recv_request({_, OH, OR},
%% either set to an invalid combination, or to a value that is
%% inconsistent with the command code's definition.
%%
-recv_request({_, OH, OR},
+recv_request(T,
{TPid, _},
_,
- #diameter_packet{header = #diameter_header{is_error = true},
- avps = Avps,
- bin = Bin}
+ #diameter_packet{header = #diameter_header{is_error = true}}
= Pkt) ->
- ?LOG({error, error_bit}, Bin),
- reply(answer_message({OH, OR, 3008}, Avps), ?BASE, TPid, Pkt);
+ protocol_error(3008, T, TPid, Pkt);
%% A message in a locally supported application or a proxiable message
%% in the relay application. Don't distinguish between the two since
@@ -1881,7 +1871,7 @@ resend(true, _, _, T, {TPid, _}, Pkt) -> %% Route-Record loop
resend(false,
Opts,
App,
- {SvcName, _, _},
+ {SvcName, _, _} = T,
{TPid, #diameter_caps{origin_host = {_, OH}}},
#diameter_packet{header = Hdr0,
avps = Avps}
@@ -1890,46 +1880,41 @@ resend(false,
Seq = diameter_session:sequence(),
Hdr = Hdr0#diameter_header{hop_by_hop_id = Seq},
Msg = [Hdr, Route | Avps],
- %% Filter sender as ineligible receiver.
- reply(call(SvcName, App, Msg, [{filter, {neg, {host, OH}}} | Opts]),
- TPid,
- Pkt).
+ resend(call(SvcName, App, Msg, Opts), T, TPid, Pkt).
%% The incoming request is relayed with the addition of a
-%% Route-Record. Note the requirement on the return from call/4.
-%% This places a requirement on the values returned by the
-%% handle_answer and handle_error callbacks of the application module
-%% in question.
+%% Route-Record. Note the requirement on the return from call/4 below,
+%% which places a requirement on the value returned by the
+%% handle_answer callback of the application module in question.
+%%
+%% Note that there's nothing stopping the request from being relayed
+%% back to the sender. A pick_peer callback may want to avoid this but
+%% a smart peer might recognize the potential loop and choose another
+%% route. A less smart one will probably just relay the request back
+%% again and force us to detect the loop. A pick_peer that wants to
+%% avoid this can specify filter to avoid the possibility.
+%% Eg. {neg, {host, OH} where #diameter_caps{origin_host = {OH, _}}.
%%
%% RFC 6.3 says that a relay agent does not modify Origin-Host but
%% says nothing about a proxy. Assume it should behave the same way.
-%% reply/3
+%% resend/4
%%
%% Relay a reply to a relayed request.
%% Answer from the peer: reset the hop by hop identifier and send.
-reply(#diameter_packet{bin = B}
- = Pkt,
- TPid,
- #diameter_packet{header = #diameter_header{hop_by_hop_id = Id},
- transport_data = TD}) ->
+resend(#diameter_packet{bin = B}
+ = Pkt,
+ _,
+ TPid,
+ #diameter_packet{header = #diameter_header{hop_by_hop_id = Id},
+ transport_data = TD}) ->
send(TPid, Pkt#diameter_packet{bin = diameter_codec:hop_by_hop_id(Id, B),
transport_data = TD});
%% TODO: counters
-%% Not. Ignoring the error feels harsh but there is no appropriate
-%% Result-Code for a protocol error (which this isn't really anyway)
-%% and the RFC doesn't provide any guidance how to act. A weakness
-%% here is that we don't deal well with a decode error: the request
-%% will simply timeout on the peer's end. Better would be to just send
-%% the answer (with modified hop by hop identifier) on regardless, at
-%% least in the relay case in which there's no examination of the
-%% answer. In the proxy case it's not clear that the callback won't
-%% examine the answer. Just be quiet here since a decode error causes
-%% the request process to crash (or not depending on the error and
-%% config and/or handle_answer callback).
-reply(_, _, _) ->
- ok.
+%% Or not: DIAMETER_UNABLE_TO_DELIVER.
+resend(_, T, TPid, Pkt) ->
+ protocol_error(3002, T, TPid, Pkt).
%% is_loop/4
%%