diff options
Diffstat (limited to 'lib/diameter/src/base/diameter_peer_fsm.erl')
-rw-r--r-- | lib/diameter/src/base/diameter_peer_fsm.erl | 225 |
1 files changed, 132 insertions, 93 deletions
diff --git a/lib/diameter/src/base/diameter_peer_fsm.erl b/lib/diameter/src/base/diameter_peer_fsm.erl index 7ee1e5fe59..1b0dc417e5 100644 --- a/lib/diameter/src/base/diameter_peer_fsm.erl +++ b/lib/diameter/src/base/diameter_peer_fsm.erl @@ -128,7 +128,12 @@ %% outgoing DPR; boolean says whether or not %% the request was sent explicitly with %% diameter:call/4. + codec :: #{string_decode := boolean(), + strict_mbit := boolean(), + rfc := 3588 | 6733, + ordered_encode := false}, strict :: boolean(), + ack = false :: boolean(), length_errors :: exit | handle | discard, incoming_maxlen :: integer() | infinity}). @@ -159,10 +164,7 @@ %% # start/3 %% --------------------------------------------------------------------------- --spec start(T, [Opt], {[diameter:service_opt()], - [node()], - module(), - #diameter_service{}}) +-spec start(T, [Opt], {map(), [node()], module(), #diameter_service{}}) -> {reference(), pid()} when T :: {connect|accept, diameter:transport_ref()}, Opt :: diameter:transport_opt(). @@ -221,9 +223,10 @@ i({Ack, WPid, {M, Ref} = T, Opts, {SvcOpts, Nodes, Dict0, Svc}}) -> erlang:monitor(process, WPid), wait(Ack, WPid), diameter_stats:reg(Ref), - diameter_codec:setopts([{common_dictionary, Dict0} | SvcOpts]), - {_,_} = Mask = proplists:get_value(sequence, SvcOpts), - Maxlen = proplists:get_value(incoming_maxlen, SvcOpts, 16#FFFFFF), + + #{sequence := Mask, incoming_maxlen := Maxlen} + = SvcOpts, + {[Cs,Ds], Rest} = proplists:split(Opts, [capabilities_cb, disconnect_cb]), putr(?CB_KEY, {Ref, [F || {_,F} <- Cs]}), putr(?DPR_KEY, [F || {_, F} <- Ds]), @@ -235,7 +238,7 @@ i({Ack, WPid, {M, Ref} = T, Opts, {SvcOpts, Nodes, Dict0, Svc}}) -> Tmo = proplists:get_value(capx_timeout, Opts, ?CAPX_TIMEOUT), Strictness = proplists:get_value(capx_strictness, Opts, true), - OnLengthErr = proplists:get_value(length_errors, Opts, exit), + LengthErr = proplists:get_value(length_errors, Opts, exit), {TPid, Addrs} = start_transport(T, Rest, Svc), @@ -247,9 +250,14 @@ i({Ack, WPid, {M, Ref} = T, Opts, {SvcOpts, Nodes, Dict0, Svc}}) -> dictionary = Dict0, mode = M, service = svc(Svc, Addrs), - length_errors = OnLengthErr, + length_errors = LengthErr, strict = Strictness, - incoming_maxlen = Maxlen}. + incoming_maxlen = Maxlen, + codec = maps:with([string_decode, + strict_mbit, + rfc, + ordered_encode], + SvcOpts#{ordered_encode => false})}. %% The transport returns its local ip addresses so that different %% transports on the same service can use different local addresses. %% The local addresses are put into Host-IP-Address avps here when @@ -359,7 +367,7 @@ handle_info(T, #state{} = State) -> %% Note that there's no guarantee that the service and transport %% capabilities are good enough to build a CER/CEA that can be -%% succesfully encoded. It's not checked at diameter:add_transport/2 +%% successfully encoded. It's not checked at diameter:add_transport/2 %% since this can be called before creating the service. %% terminate/2 @@ -442,9 +450,18 @@ transition({connection_timeout = T, TPid}, transition({connection_timeout, _}, _) -> ok; +%% Requests for acknowledgements to the transport. +transition({diameter, ack}, S) -> + S#state{ack = true}; + %% Incoming message from the transport. -transition({diameter, {recv, MsgT}}, S) -> - incoming(MsgT, S); +transition({diameter, {recv, Msg}}, S) -> + incoming(recv(Msg, S), S); + +%% Handler of an incoming request is telling of its existence. +transition({handler, Pid}, _) -> + put_route(Pid), + ok; %% Timeout when still in the same state ... transition({timeout = T, PS}, #state{state = PS}) -> @@ -458,7 +475,7 @@ transition({timeout, _}, _) -> transition({send, Msg}, S) -> outgoing(Msg, S); transition({send, Msg, Route}, S) -> - put_route(Route), + route_outgoing(Route), outgoing(Msg, S); %% Request for graceful shutdown at remove_transport, stop_service of @@ -487,12 +504,13 @@ transition({'DOWN', _, process, WPid, _}, transition({'DOWN', _, process, TPid, _}, #state{transport = TPid} = S) -> - start_next(S); + start_next(S#state{ack = false}); %% Transport has died after connection timeout, or handler process has %% died. -transition({'DOWN', _, process, Pid, _}, _) -> - erase_route(Pid), +transition({'DOWN', _, process, Pid, _}, #state{transport = TPid}) -> + is_reference(erase_route(Pid)) + andalso send(TPid, false), %% answer not forthcoming ok; %% State query. @@ -502,37 +520,56 @@ transition({state, Pid}, #state{state = S, transport = TPid}) -> %% Crash on anything unexpected. -%% put_route/1 -%% +%% route_outgoing/1 + %% Map identifiers in an outgoing request to be able to lookup the %% handler process when the answer is received. - -put_route({Pid, Ref, Seqs}) -> +route_outgoing({Pid, Ref, Seqs}) -> %% request MRef = monitor(process, Pid), put(Pid, Seqs), - put(Seqs, {Pid, Ref, MRef}). + put(Seqs, {Pid, Ref, MRef}); -%% get_route/1 +%% Remove a mapping made for an incoming request. +route_outgoing(Pid) + when is_pid(Pid) -> %% answer + MRef = erase_route(Pid), + undefined == MRef orelse demonitor(MRef). -get_route(#diameter_packet{header = #diameter_header{is_request = false}} - = Pkt) -> +%% put_route/1 + +%% Monitor on a handler process for an incoming request. +put_route(Pid) -> + MRef = monitor(process, Pid), + put(Pid, MRef). + +%% get_route/2 + +%% incoming answer +get_route(_, #diameter_packet{header = #diameter_header{is_request = false}} + = Pkt) -> Seqs = diameter_codec:sequence_numbers(Pkt), case erase(Seqs) of {Pid, Ref, MRef} -> demonitor(MRef), erase(Pid), {Pid, Ref, self()}; - undefined -> + undefined -> %% request unknown false end; -get_route(_) -> - false. +%% incoming request +get_route(Ack, _) -> + Ack. %% erase_route/1 erase_route(Pid) -> - erase(erase(Pid)). + case erase(Pid) of + {_,_} = Seqs -> + erase(Seqs); + T -> + T + end. %% capx/1 @@ -560,7 +597,8 @@ send_CER(#state{state = {'Wait-Conn-Ack', Tmo}, mode = {connect, Remote}, service = #diameter_service{capabilities = LCaps}, transport = TPid, - dictionary = Dict} + dictionary = Dict, + codec = Opts} = S) -> OH = LCaps#diameter_caps.origin_host, req_send_CER(OH, Remote) @@ -570,7 +608,7 @@ send_CER(#state{state = {'Wait-Conn-Ack', Tmo}, #diameter_packet{header = #diameter_header{end_to_end_id = Eid, hop_by_hop_id = Hid}} = Pkt - = encode(CER, Dict), + = encode(CER, Opts, Dict), incr(send, Pkt, Dict), send(TPid, Pkt), ?LOG(send, 'CER'), @@ -599,41 +637,36 @@ build_CER(#state{service = #diameter_service{capabilities = LCaps}, {ok, CER} = diameter_capx:build_CER(LCaps, Dict), CER. -%% encode/2 +%% encode/3 -encode(Rec, Dict) -> +encode(Rec, Opts, Dict) -> Seq = diameter_session:sequence({_,_} = getr(?SEQUENCE_KEY)), Hdr = #diameter_header{version = ?DIAMETER_VERSION, end_to_end_id = Seq, hop_by_hop_id = Seq}, - diameter_codec:encode(Dict, #diameter_packet{header = Hdr, - msg = Rec}). + diameter_codec:encode(Dict, Opts, #diameter_packet{header = Hdr, + msg = Rec}). %% incoming/2 -incoming({Msg, NPid}, S) -> - try recv(Msg, S) of - T -> - NPid ! {diameter, discard}, - T - catch - {?MODULE, Name, Pkt} -> - incoming(Name, Pkt, NPid, S) - end; +incoming({recv = T, Name, Pkt}, #state{parent = Pid, ack = Ack} = S) -> + Pid ! {T, self(), get_route(Ack, Pkt), Name, Pkt}, + rcv(Name, Pkt, S); -incoming(Msg, S) -> - try - recv(Msg, S) - catch - {?MODULE, Name, Pkt} -> - incoming(Name, Pkt, false, S) - end. +incoming(#diameter_header{is_request = R}, #state{transport = TPid, + ack = Ack}) -> + R andalso Ack andalso send(TPid, false), + ok; -%% incoming/4 +incoming(<<_:32, 1:1, _/bits>>, #state{ack = true} = S) -> + send(S#state.transport, false), + ok; -incoming(Name, Pkt, NPid, #state{parent = Pid} = S) -> - Pid ! {recv, self(), get_route(Pkt), Name, Pkt, NPid}, - rcv(Name, Pkt, S). +incoming(<<_/bits>>, _) -> + ok; + +incoming(T, _) -> + T. %% recv/2 @@ -658,18 +691,19 @@ recv1(_, #diameter_packet{header = H, bin = Bin}, #state{incoming_maxlen = M}) when M < size(Bin) -> - invalid(false, incoming_maxlen_exceeded, {size(Bin), H}); + invalid(false, incoming_maxlen_exceeded, {size(Bin), H}), + H; %% Ignore anything but an expected CER/CEA if so configured. This is %% non-standard behaviour. -recv1(Name, _, #state{state = {'Wait-CEA', _, _}, - strict = false}) +recv1(Name, #diameter_packet{header = H}, #state{state = {'Wait-CEA', _, _}, + strict = false}) when Name /= 'CEA' -> - ok; -recv1(Name, _, #state{state = recv_CER, - strict = false}) + H; +recv1(Name, #diameter_packet{header = H}, #state{state = recv_CER, + strict = false}) when Name /= 'CER' -> - ok; + H; %% Incoming request after outgoing DPR: discard. Don't discard DPR, so %% both ends don't do so when sending simultaneously. @@ -677,13 +711,15 @@ recv1(Name, #diameter_packet{header = #diameter_header{is_request = true} = H}, #state{dpr = {_,_,_}}) when Name /= 'DPR' -> - invalid(false, recv_after_outgoing_dpr, H); + invalid(false, recv_after_outgoing_dpr, H), + H; %% Incoming request after incoming DPR: discard. recv1(_, #diameter_packet{header = #diameter_header{is_request = true} = H}, #state{dpr = true}) -> - invalid(false, recv_after_incoming_dpr, H); + invalid(false, recv_after_incoming_dpr, H), + H; %% DPA with identifier mismatch, or in response to a DPR initiated by %% the service. @@ -701,7 +737,7 @@ recv1('DPA' = N, %% Any other message with a header and no length errors: send to the %% parent. recv1(Name, Pkt, #state{}) -> - throw({?MODULE, Name, Pkt}). + {recv, Name, Pkt}. %% recv/3 @@ -720,10 +756,12 @@ recv(#diameter_header{} #diameter_packet{bin = Bin}, #state{length_errors = E}) -> T = {size(Bin), bit_size(Bin) rem 8, H}, - invalid(E, message_length_mismatch, T); + invalid(E, message_length_mismatch, T), + Bin; recv(false, #diameter_packet{bin = Bin}, #state{length_errors = E}) -> - invalid(E, truncated_header, Bin). + invalid(E, truncated_header, Bin), + Bin. %% Note that counters here only count discarded messages. invalid(E, Reason, T) -> @@ -767,26 +805,23 @@ rcv('DPA' = N, = Pkt, #state{dictionary = Dict0, transport = TPid, - dpr = {X, Hid, Eid}}) -> + dpr = {X, Hid, Eid}, + codec = Opts}) -> ?LOG(recv, N), X orelse begin %% Only count DPA in response to a DPR sent by the %% service: explicit DPR is counted in the same way %% as other explicitly sent requests. incr(recv, H, Dict0), - incr_rc(recv, diameter_codec:decode(Dict0, Pkt), Dict0) + incr_rc(recv, diameter_codec:decode(Dict0, Opts, Pkt), Dict0) end, diameter_peer:close(TPid), {stop, N}; -%% Ignore anything else, an unsolicited DPA in particular. Note that -%% dpa_timeout deals with the case in which the peer sends the wrong -%% identifiers in DPA. -rcv(N, #diameter_packet{header = H}, _) - when N == 'CER'; - N == 'CEA'; - N == 'DPR'; - N == 'DPA' -> +%% Ignore an unsolicited DPA in particular. Note that dpa_timeout +%% deals with the case in which the peer sends the wrong identifiers +%% in DPA. +rcv('DPA' = N, #diameter_packet{header = H}, _) -> ?LOG(ignored, N), %% Note that these aren't counted in the normal recv counter. diameter_stats:incr({diameter_codec:msg_id(H), recv, ignored}), @@ -839,7 +874,7 @@ outgoing(#diameter_packet{header = #diameter_header{application_id = 0, invalid(false, dpr_after_dpr, H) %% DPR sent: discard end; -%% Explict CER or DWR: discard. These are sent by us. +%% Explicit CER or DWR: discard. These are sent by us. outgoing(#diameter_packet{header = #diameter_header{application_id = 0, cmd_code = C, is_request = true} @@ -875,15 +910,21 @@ header(Bin) -> %% DWR %% Incoming CER or DPR. handle_request(Name, - #diameter_packet{header = H} = Pkt, - #state{dictionary = Dict0} = S) -> + #diameter_packet{header = H} + = Pkt, + #state{dictionary = Dict0, + codec = Opts} + = S) -> ?LOG(recv, Name), incr(recv, H, Dict0), - send_answer(Name, diameter_codec:decode(Dict0, Pkt), S). + send_answer(Name, diameter_codec:decode(Dict0, Opts, Pkt), S). %% send_answer/3 -send_answer(Type, ReqPkt, #state{transport = TPid, dictionary = Dict} = S) -> +send_answer(Type, ReqPkt, #state{transport = TPid, + dictionary = Dict, + codec = Opts} + = S) -> incr_error(recv, ReqPkt, Dict), #diameter_packet{header = H, @@ -902,7 +943,7 @@ send_answer(Type, ReqPkt, #state{transport = TPid, dictionary = Dict} = S) -> msg = Msg, transport_data = TD}, - AnsPkt = diameter_codec:encode(Dict, Pkt), + AnsPkt = diameter_codec:encode(Dict, Opts, Pkt), incr(send, AnsPkt, Dict), incr_rc(send, AnsPkt, Dict), @@ -929,8 +970,6 @@ build_answer('CER', = Pkt, #state{dictionary = Dict0} = S) -> - diameter_codec:setopts([{string_decode, false}]), - {SupportedApps, RCaps, CEA} = recv_CER(CER, S), [RC, IS] = Dict0:'#get-'(['Result-Code', 'Inband-Security-Id'], CEA), @@ -1131,18 +1170,16 @@ recv_CER(CER, #state{service = Svc, dictionary = Dict}) -> handle_CEA(#diameter_packet{header = H} = Pkt, #state{dictionary = Dict0, - service = #diameter_service{capabilities = LCaps}} + service = #diameter_service{capabilities = LCaps}, + codec = Opts} = S) -> incr(recv, H, Dict0), #diameter_packet{} = DPkt - = diameter_codec:decode(Dict0, Pkt), - - diameter_codec:setopts([{string_decode, false}]), + = diameter_codec:decode(Dict0, Opts, Pkt), RC = result_code(incr_rc(recv, DPkt, Dict0)), - {SApps, IS, RCaps} = recv_CEA(DPkt, S), #diameter_caps{origin_host = {OH, DH}} @@ -1330,8 +1367,9 @@ dpr([], [Reason | _], S) -> -record(opts, {cause, timeout}). -send_dpr(Reason, Opts, #state{dictionary = Dict, - service = #diameter_service{capabilities = Caps}} +send_dpr(Reason, DprOpts, #state{dictionary = Dict, + service = #diameter_service{capabilities = Caps}, + codec = Opts} = S) -> #opts{cause = Cause, timeout = Tmo} = lists:foldl(fun opt/2, @@ -1340,7 +1378,7 @@ send_dpr(Reason, Opts, #state{dictionary = Dict, _ -> ?REBOOT end, timeout = dpa_timeout()}, - Opts), + DprOpts), #diameter_caps{origin_host = {OH, _}, origin_realm = {OR, _}} = Caps, @@ -1348,6 +1386,7 @@ send_dpr(Reason, Opts, #state{dictionary = Dict, Pkt = encode(['DPR', {'Origin-Host', OH}, {'Origin-Realm', OR}, {'Disconnect-Cause', Cause}], + Opts, Dict), send_dpr(false, Pkt, Tmo, S). |