aboutsummaryrefslogtreecommitdiffstats
path: root/lib/diameter/src/base/diameter_service.erl
diff options
context:
space:
mode:
Diffstat (limited to 'lib/diameter/src/base/diameter_service.erl')
-rw-r--r--lib/diameter/src/base/diameter_service.erl1948
1 files changed, 207 insertions, 1741 deletions
diff --git a/lib/diameter/src/base/diameter_service.erl b/lib/diameter/src/base/diameter_service.erl
index 5015908582..a4b788af4e 100644
--- a/lib/diameter/src/base/diameter_service.erl
+++ b/lib/diameter/src/base/diameter_service.erl
@@ -24,29 +24,33 @@
-module(diameter_service).
-behaviour(gen_server).
+%% towards diameter_service_sup
+-export([start_link/1]).
+
+%% towards diameter
+-export([subscribe/1,
+ unsubscribe/1,
+ services/0,
+ info/2]).
+
+%% towards diameter_config
-export([start/1,
stop/1,
start_transport/2,
- stop_transport/2,
- info/2,
- call/4]).
+ stop_transport/2]).
-%% towards diameter_watchdog
--export([receive_message/4]).
+%% towards diameter_peer
+-export([whois/1]).
-%% service supervisor
--export([start_link/1]).
+%% towards diameter_traffic
+-export([find_incoming_app/4,
+ pick_peer/3]).
--export([subscribe/1,
- unsubscribe/1,
+%% test/debug
+-export([services/1,
subscriptions/1,
subscriptions/0,
- services/0,
- services/1,
- whois/1]).
-
-%% test/debug
--export([call_module/3,
+ call_module/3,
state/1,
uptime/1]).
@@ -58,9 +62,6 @@
terminate/2,
code_change/3]).
-%% Other callbacks.
--export([send/1]).
-
-include_lib("diameter/include/diameter.hrl").
-include("diameter_internal.hrl").
@@ -78,12 +79,8 @@
| ?WD_REOPEN.
-define(DEFAULT_TC, 30000). %% RFC 3588 ch 2.1
--define(DEFAULT_TIMEOUT, 5000). %% for outgoing requests
-define(RESTART_TC, 1000). %% if restart was this recent
--define(RELAY, ?DIAMETER_DICT_RELAY).
--define(BASE, ?DIAMETER_DICT_COMMON).
-
%% Used to be able to swap this with anything else dict-like but now
%% rely on the fact that a service's #state{} record does not change
%% in storing in it ?STATE table and not always going through the
@@ -91,10 +88,6 @@
%% a ?Dict don't change the handle to it.
-define(Dict, diameter_dict).
-%% Table containing outgoing requests for which a reply has yet to be
-%% received.
--define(REQUEST_TABLE, diameter_request).
-
%% Maintains state in a table. In contrast to previously, a service's
%% stat is not constant and is accessed outside of the service
%% process.
@@ -108,9 +101,14 @@
%% Workaround for dialyzer's lack of understanding of match specs.
-type match(T)
- :: T | '_' | '$1' | '$2' | '$3' | '$4'.
-
-%% State of service gen_server.
+ :: T | '_' | '$1' | '$2'.
+
+%% State of service gen_server. Note that the state term itself
+%% doesn't change, which is relevant for the stateless application
+%% callbacks since the state is retrieved from ?STATE_TABLE from
+%% outside the service process. The pid in the service record is used
+%% to determine whether or not we need to call the process for a
+%% pick_peer callback in the statefull case.
-record(state,
{id = now(),
service_name :: diameter:service_name(), %% key in ?STATE_TABLE
@@ -119,20 +117,17 @@
:: ets:tid(),
peerT = ets_new(peers) %% #peer{pid = TPid} at okay/reopen
:: ets:tid(),
- shared_peers = ?Dict:new(), %% Alias -> [{TPid, Caps}, ...]
- local_peers = ?Dict:new(), %% Alias -> [{TPid, Caps}, ...]
+ shared_peers = ?Dict:new() %% Alias -> [{TPid, Caps}, ...]
+ :: ets:tid(),
+ local_peers = ?Dict:new() %% Alias -> [{TPid, Caps}, ...]
+ :: ets:tid(),
monitor = false :: false | pid(), %% process to die with
options
:: [{sequence, diameter:sequence()} %% sequence mask
| {restrict_connections, diameter:restriction()}
| {share_peers, boolean()} %% broadcast peers to remote nodes?
| {use_shared_peers, boolean()}]}).%% use broadcasted peers?
-%% shared_peers reflects the peers broadcast from remote nodes. Note
-%% that the state term itself doesn't change, which is relevant for
-%% the stateless application callbacks since the state is retrieved
-%% from ?STATE_TABLE from outside the service process. The pid in the
-%% service record is used to determine whether or not we need to call
-%% the process for a pick_peer callback.
+%% shared_peers reflects the peers broadcast from remote nodes.
%% Record representing an RFC 3539 watchdog process implemented by
%% diameter_watchdog.
@@ -155,29 +150,6 @@
started = now(), %% at process start
watchdog :: pid()}). %% key into watchdogT
-%% Record stored in diameter_request for each outgoing request.
--record(request,
- {ref :: match(reference()), %% used to receive answer
- caller :: match(pid()), %% calling process
- handler :: match(pid()), %% request process
- transport :: match(pid()), %% peer process
- caps :: match(#diameter_caps{}), %% of connection
- packet :: match(#diameter_packet{})}). %% of request
-
-%% Record call/4 options are parsed into.
--record(options,
- {filter = none :: diameter:peer_filter(),
- extra = [] :: list(),
- timeout = ?DEFAULT_TIMEOUT :: 0..16#FFFFFFFF,
- detach = false :: boolean()}).
-
-%% Term passed back to receive_message/4 with every incoming message.
--record(recvdata,
- {peerT :: ets:tid(),
- service_name :: diameter:service_name(),
- apps :: [#diameter_app{}],
- sequence :: diameter:sequence()}).
-
%% ---------------------------------------------------------------------------
%% # start/1
%% ---------------------------------------------------------------------------
@@ -230,159 +202,17 @@ stop_transport(SvcName, [_|_] = Refs) ->
%% ---------------------------------------------------------------------------
info(SvcName, Item) ->
- case find_state(SvcName) of
- #state{} = S ->
+ case lookup_state(SvcName) of
+ [#state{} = S] ->
service_info(Item, S);
- false ->
+ [] ->
undefined
end.
-%% ---------------------------------------------------------------------------
-%% # receive_message/4
-%% ---------------------------------------------------------------------------
-
-%% Handle an incoming Diameter message in the watchdog process. This
-%% used to come through the service process but this avoids that
-%% becoming a bottleneck.
-
-receive_message(TPid, Pkt, Dict0, RecvData)
- when is_pid(TPid) ->
- #diameter_packet{header = #diameter_header{is_request = R}} = Pkt,
- recv(R,
- (not R) andalso lookup_request(Pkt, TPid),
- TPid,
- Pkt,
- Dict0,
- RecvData).
-
-%% Incoming request ...
-recv(true, false, TPid, Pkt, Dict0, RecvData) ->
- try
- spawn(fun() -> recv_request(TPid, Pkt, Dict0, RecvData) end)
- catch
- error: system_limit = E -> %% discard
- ?LOG({error, E}, now())
- end;
-
-%% ... answer to known request ...
-recv(false, #request{ref = Ref, handler = Pid} = Req, _, Pkt, Dict0, _) ->
- Pid ! {answer, Ref, Req, Dict0, Pkt};
-%% Note that failover could have happened prior to this message being
-%% received and triggering failback. That is, both a failover message
-%% and answer may be on their way to the handler process. In the worst
-%% case the request process gets notification of the failover and
-%% sends to the alternate peer before an answer arrives, so it's
-%% always the case that we can receive more than one answer after
-%% failover. The first answer received by the request process wins,
-%% any others are discarded.
-
-%% ... or not.
-recv(false, false, _, _, _, _) ->
- ok.
-
-%% ---------------------------------------------------------------------------
-%% # call/4
-%% ---------------------------------------------------------------------------
-
-call(SvcName, App, Msg, Options)
- when is_list(Options) ->
- Rec = make_options(Options),
- Ref = make_ref(),
- Caller = {self(), Ref},
- Fun = fun() -> exit({Ref, call(SvcName, App, Msg, Rec, Caller)}) end,
- try spawn_monitor(Fun) of
- {_, MRef} ->
- recv(MRef, Ref, Rec#options.detach, false)
- catch
- error: system_limit = E ->
- {error, E}
- end.
-
-%% Don't rely on gen_server:call/3 for the timeout handling since it
-%% makes no guarantees about not leaving a reply message in the
-%% mailbox if we catch its exit at timeout. It currently *can* do so,
-%% which is also undocumented.
-
-recv(MRef, _, true, true) ->
- erlang:demonitor(MRef, [flush]),
- ok;
-
-recv(MRef, Ref, Detach, Sent) ->
- receive
- Ref -> %% send has been attempted
- recv(MRef, Ref, Detach, true);
- {'DOWN', MRef, process, _, Reason} ->
- call_rc(Reason, Ref, Sent)
- end.
-
-%% call/5 has returned ...
-call_rc({Ref, Ans}, Ref, _) ->
- Ans;
-
-%% ... or not. In this case failure/encode are documented.
-call_rc(_, _, Sent) ->
- {error, choose(Sent, failure, encode)}.
-
-%% call/5
-%%
-%% In the process spawned for the outgoing request.
-
-call(SvcName, App, Msg, Opts, Caller) ->
- c(find_state(SvcName), App, Msg, Opts, Caller).
-
-c(#state{service_name = SvcName, options = [{_, Mask} | _]} = S,
- App,
- Msg,
- Opts,
- Caller) ->
- case find_transport(App, Msg, Opts, S) of
- {_,_,_} = T ->
- send_request(T, Mask, Msg, Opts, Caller, SvcName);
- false ->
- {error, no_connection};
- {error, _} = No ->
- No
- end;
-
-c(false, _, _, _, _) ->
- {error, no_service}.
-
-%% find_state/1
-
-find_state(SvcName) ->
- fs(ets:lookup(?STATE_TABLE, SvcName)).
-
-fs([#state{} = S]) ->
- S;
-
-fs([]) ->
- false.
-
-%% make_options/1
-
-make_options(Options) ->
- lists:foldl(fun mo/2, #options{}, Options).
-
-mo({timeout, T}, Rec)
- when is_integer(T), 0 =< T ->
- Rec#options{timeout = T};
-
-mo({filter, F}, #options{filter = none} = Rec) ->
- Rec#options{filter = F};
-mo({filter, F}, #options{filter = {all, Fs}} = Rec) ->
- Rec#options{filter = {all, [F | Fs]}};
-mo({filter, F}, #options{filter = F0} = Rec) ->
- Rec#options{filter = {all, [F0, F]}};
-
-mo({extra, L}, #options{extra = X} = Rec)
- when is_list(L) ->
- Rec#options{extra = X ++ L};
-
-mo(detach, Rec) ->
- Rec#options{detach = true};
+%% lookup_state/1
-mo(T, _) ->
- ?ERROR({invalid_option, T}).
+lookup_state(SvcName) ->
+ ets:lookup(?STATE_TABLE, SvcName).
%% ---------------------------------------------------------------------------
%% # subscribe/1
@@ -422,6 +252,78 @@ whois(SvcName) ->
undefined
end.
+%% ---------------------------------------------------------------------------
+%% # pick_peer/3
+%% ---------------------------------------------------------------------------
+
+-spec pick_peer(SvcName, AppOrAlias, Opts)
+ -> {{TPid, Caps, App}, Mask}
+ | false
+ | {error, term()}
+ when SvcName :: diameter:service_name(),
+ AppOrAlias :: {alias, diameter:app_alias()} | #diameter_app{},
+ Opts :: tuple(),
+ TPid :: pid(),
+ Caps :: #diameter_caps{},
+ App :: #diameter_app{},
+ Mask :: diameter:sequence().
+
+pick_peer(SvcName, App, Opts) ->
+ pick(lookup_state(SvcName), App, Opts).
+
+pick([], _, _) ->
+ {error, no_service};
+
+pick([S], App, Opts) ->
+ pick(S, App, Opts);
+
+pick(#state{service = #diameter_service{applications = Apps}}
+ = S,
+ {alias, Alias},
+ Opts) -> %% initial call from diameter:call/4
+ pick(S, find_outgoing_app(Alias, Apps), Opts);
+
+pick(_, false, _) ->
+ false;
+
+pick(#state{options = [{_, Mask} | _]}
+ = S,
+ #diameter_app{module = ModX, dictionary = Dict}
+ = App0,
+ {DestF, Filter, Xtra}) ->
+ App = App0#diameter_app{module = ModX ++ Xtra},
+ [_,_] = RealmAndHost = diameter_lib:eval([DestF, Dict]),
+ case pick_peer(App, RealmAndHost, Filter, S) of
+ {TPid, Caps} ->
+ {{TPid, Caps, App}, Mask};
+ false = No ->
+ No
+ end.
+
+%% ---------------------------------------------------------------------------
+%% # find_incoming_app/4
+%% ---------------------------------------------------------------------------
+
+-spec find_incoming_app(PeerT, TPid, Id, Apps)
+ -> {#diameter_app{}, #diameter_caps{}} %% connection and suitable app
+ | #diameter_caps{} %% connection but no suitable app
+ | false %% no connection
+ when PeerT :: ets:tid(),
+ TPid :: pid(),
+ Id :: non_neg_integer(),
+ Apps :: [#diameter_app{}].
+
+find_incoming_app(PeerT, TPid, Id, Apps) ->
+ try ets:lookup(PeerT, TPid) of
+ [#peer{} = P] ->
+ find_incoming_app(P, Id, Apps);
+ [] -> %% transport has gone down
+ false
+ catch
+ error: badarg -> %% service has gone down (and taken table with it)
+ false
+ end.
+
%% ===========================================================================
%% ===========================================================================
@@ -580,13 +482,6 @@ transition({tc_timeout, T}, S) ->
tc_timeout(T, S),
ok;
-%% Request process is telling us it may have missed a failover message
-%% after a transport went down and the service process looked up
-%% outstanding requests.
-transition({failover, TRef, Seqs}, _) ->
- failover(TRef, Seqs),
- ok;
-
transition(Req, S) ->
unexpected(handle_info, [Req], S),
ok.
@@ -630,8 +525,6 @@ unexpected(F, A, #state{service_name = Name}) ->
?UNEXPECTED(F, A ++ [Name]).
cb(#diameter_app{module = [_|_] = M}, F, A) ->
- eval(M, F, A);
-cb([_|_] = M, F, A) ->
eval(M, F, A).
eval([M|X], F, A) ->
@@ -639,14 +532,12 @@ eval([M|X], F, A) ->
%% Callback with state.
-state_cb(#diameter_app{mutable = false, init_state = S}, {ModX, F, A}) ->
+state_cb(#diameter_app{module = ModX, mutable = false, init_state = S},
+ pick_peer = F,
+ A) ->
eval(ModX, F, A ++ [S]);
-state_cb(#diameter_app{mutable = true, alias = Alias}, {_,_,_} = MFA) ->
- state_cb(MFA, Alias);
-
-state_cb({ModX,F,A}, Alias)
- when is_list(ModX) ->
+state_cb(#diameter_app{module = ModX, alias = Alias}, F, A) ->
eval(ModX, F, A ++ [mod_state(Alias)]).
choose(true, X, _) -> X;
@@ -840,12 +731,11 @@ start(Ref, Type, Opts, #state{watchdogT = WatchdogT,
#diameter_service{applications = Apps}
= Svc
= merge_service(Opts, Svc0),
- Pid = s(Type, Ref, {#recvdata{service_name = SvcName,
- peerT = PeerT,
- apps = Apps,
- sequence
- = {_,_}
- = proplists:get_value(sequence, SvcOpts)},
+ {_,_} = Mask = proplists:get_value(sequence, SvcOpts),
+ Pid = s(Type, Ref, {diameter_traffic:make_recvdata([SvcName,
+ PeerT,
+ Apps,
+ Mask]),
Opts,
SvcOpts,
Svc}),
@@ -1001,7 +891,7 @@ connection_up(Extra,
service = #diameter_service{applications = Apps}}
= S) ->
insert(WatchdogT, Wd#watchdog{state = ?WD_OKAY}),
- request_peer_up(TPid),
+ diameter_traffic:peer_up(TPid),
insert_local_peer(SApps, {{TPid, Caps}, {SvcName, Apps}}, LDict),
report_status(up, Wd, Pr, S, Extra).
@@ -1013,13 +903,57 @@ ilp({Id, Alias}, {TC, SA}, LDict) ->
?Dict:append(Alias, TC, LDict).
init_conn(Id, Alias, {TPid, _} = TC, {SvcName, Apps}) ->
- #diameter_app{module = ModX,
- id = Id} %% assert
+ #diameter_app{id = Id} %% assert
+ = App
= find_app(Alias, Apps),
- peer_cb({ModX, peer_up, [SvcName, TC]}, Alias)
+ peer_cb(App, peer_up, [SvcName, TC])
orelse exit(TPid, kill). %% fake transport failure
+%% ---------------------------------------------------------------------------
+%% # find_incoming_app/3
+%% ---------------------------------------------------------------------------
+
+%% No one should be sending the relay identifier.
+find_incoming_app(#peer{caps = Caps}, ?APP_ID_RELAY, _) ->
+ Caps;
+
+find_incoming_app(Peer, Id, Apps)
+ when is_integer(Id) ->
+ find_incoming_app(Peer, [Id, ?APP_ID_RELAY], Apps);
+
+%% Note that the apps represented in SApps may be a strict subset of
+%% those in Apps.
+find_incoming_app(#peer{apps = SApps, caps = Caps}, Ids, Apps) ->
+ case keyfind(Ids, 1, SApps) of
+ {_Id, Alias} ->
+ {#diameter_app{} = find_app(Alias, Apps), Caps};
+ false ->
+ Caps
+ end.
+
+%% keyfind/3
+
+keyfind([], _, _) ->
+ false;
+keyfind([Key | Rest], Pos, L) ->
+ case lists:keyfind(Key, Pos, L) of
+ false ->
+ keyfind(Rest, Pos, L);
+ T ->
+ T
+ end.
+
+%% find_outgoing_app/2
+
+find_outgoing_app(Alias, Apps) ->
+ case find_app(Alias, Apps) of
+ #diameter_app{id = ?APP_ID_RELAY} ->
+ false;
+ A ->
+ A
+ end.
+
%% find_app/2
find_app(Alias, Apps) ->
@@ -1027,14 +961,15 @@ find_app(Alias, Apps) ->
%% Don't bring down the service (and all associated connections)
%% regardless of what happens.
-peer_cb(MFA, Alias) ->
- try state_cb(MFA, Alias) of
+peer_cb(App, F, A) ->
+ try state_cb(App, F, A) of
ModS ->
- mod_state(Alias, ModS),
+ mod_state(App#diameter_app.alias, ModS),
true
catch
E:R ->
- diameter_lib:error_report({failure, {E, R, Alias, ?STACK}}, MFA),
+ diameter_lib:error_report({failure, {E, R, ?STACK}},
+ {App, F, A}),
false
end.
@@ -1054,7 +989,7 @@ connection_down(#watchdog{state = ?WD_OKAY,
= S) ->
report_status(down, Wd, Pr, S, []),
remove_local_peer(SApps, {{TPid, Caps}, {SvcName, Apps}}, LDict),
- request_peer_down(TPid);
+ diameter_traffic:peer_down(TPid);
connection_down(#watchdog{}, #peer{}, _) ->
ok;
@@ -1081,11 +1016,11 @@ rlp({Id, Alias}, {TC, SA}, LDict) ->
?Dict:store(Alias, lists:delete(TC, L), LDict).
down_conn(Id, Alias, TC, {SvcName, Apps}) ->
- #diameter_app{module = ModX,
- id = Id} %% assert
+ #diameter_app{id = Id} %% assert
+ = App
= find_app(Alias, Apps),
- peer_cb({ModX, peer_down, [SvcName, TC]}, Alias).
+ peer_cb(App, peer_down, [SvcName, TC]).
%% ---------------------------------------------------------------------------
%% # watchdog_down/2
@@ -1253,10 +1188,10 @@ call_module(Mod, Req, From, #state{service
{reply, {error, Reason}, S}
end.
-cm([#diameter_app{module = ModX, alias = Alias}], Req, From, Svc) ->
- MFA = {ModX, handle_call, [Req, From, Svc]},
+cm([#diameter_app{alias = Alias} = App], Req, From, Svc) ->
+ Args = [Req, From, Svc],
- try state_cb(MFA, Alias) of
+ try state_cb(App, handle_call, Args) of
{noreply = T, ModS} ->
mod_state(Alias, ModS),
T;
@@ -1264,11 +1199,13 @@ cm([#diameter_app{module = ModX, alias = Alias}], Req, From, Svc) ->
mod_state(Alias, ModS),
{T, RC};
T ->
- diameter_lib:error_report({invalid, T}, MFA),
+ diameter_lib:error_report({invalid, T},
+ {App, handle_call, Args}),
invalid
catch
E: Reason ->
- diameter_lib:error_report({failure, {E, Reason, ?STACK}}, MFA),
+ diameter_lib:error_report({failure, {E, Reason, ?STACK}},
+ {App, handle_call, Args}),
failure
end;
@@ -1279,1335 +1216,6 @@ cm([_,_|_], _, _, _) ->
multiple.
%% ---------------------------------------------------------------------------
-%% # send_request/6
-%% ---------------------------------------------------------------------------
-
-%% Send an outgoing request in its dedicated process.
-%%
-%% Note that both encode of the outgoing request and of the received
-%% answer happens in this process. It's also this process that replies
-%% to the caller. The service process only handles the state-retaining
-%% callbacks.
-%%
-%% The module field of the #diameter_app{} here includes any extra
-%% arguments passed to diameter:call/4.
-
-send_request({TPid, Caps, App}
- = Transport,
- Mask,
- Msg,
- Opts,
- Caller,
- SvcName) ->
- Pkt = make_prepare_packet(Mask, Msg),
-
- send_req(cb(App, prepare_request, [Pkt, SvcName, {TPid, Caps}]),
- Pkt,
- Transport,
- Opts,
- Caller,
- SvcName,
- []).
-
-send_req({send, Msg}, Pkt, Transport, Opts, Caller, SvcName, Fs) ->
- send_req(make_request_packet(Msg, Pkt),
- Transport,
- Opts,
- Caller,
- SvcName,
- Fs);
-
-send_req({discard, Reason} , _, _, _, _, _, _) ->
- {error, Reason};
-
-send_req(discard, _, _, _, _, _, _) ->
- {error, discarded};
-
-send_req({eval_packet, RC, F}, Pkt, T, Opts, Caller, SvcName, Fs) ->
- send_req(RC, Pkt, T, Opts, Caller, SvcName, [F|Fs]);
-
-send_req(E, _, {_, _, App}, _, _, _, _) ->
- ?ERROR({invalid_return, prepare_request, App, E}).
-
-%% make_prepare_packet/2
-%%
-%% Turn an outgoing request as passed to call/4 into a diameter_packet
-%% record in preparation for a prepare_request callback.
-
-make_prepare_packet(_, Bin)
- when is_binary(Bin) ->
- #diameter_packet{header = diameter_codec:decode_header(Bin),
- bin = Bin};
-
-make_prepare_packet(Mask, #diameter_packet{msg = [#diameter_header{} = Hdr
- | Avps]}
- = Pkt) ->
- Pkt#diameter_packet{msg = [make_prepare_header(Mask, Hdr) | Avps]};
-
-make_prepare_packet(Mask, #diameter_packet{header = Hdr} = Pkt) ->
- Pkt#diameter_packet{header = make_prepare_header(Mask, Hdr)};
-
-make_prepare_packet(Mask, Msg) ->
- make_prepare_packet(Mask, #diameter_packet{msg = Msg}).
-
-%% make_prepare_header/2
-
-make_prepare_header(Mask, undefined) ->
- Seq = diameter_session:sequence(Mask),
- make_prepare_header(#diameter_header{end_to_end_id = Seq,
- hop_by_hop_id = Seq});
-
-make_prepare_header(Mask, #diameter_header{end_to_end_id = undefined,
- hop_by_hop_id = undefined}
- = H) ->
- Seq = diameter_session:sequence(Mask),
- make_prepare_header(H#diameter_header{end_to_end_id = Seq,
- hop_by_hop_id = Seq});
-
-make_prepare_header(Mask, #diameter_header{end_to_end_id = undefined} = H) ->
- Seq = diameter_session:sequence(Mask),
- make_prepare_header(H#diameter_header{end_to_end_id = Seq});
-
-make_prepare_header(Mask, #diameter_header{hop_by_hop_id = undefined} = H) ->
- Seq = diameter_session:sequence(Mask),
- make_prepare_header(H#diameter_header{hop_by_hop_id = Seq});
-
-make_prepare_header(_, Hdr) ->
- make_prepare_header(Hdr).
-
-%% make_prepare_header/1
-
-make_prepare_header(#diameter_header{version = undefined} = Hdr) ->
- make_prepare_header(Hdr#diameter_header{version = ?DIAMETER_VERSION});
-
-make_prepare_header(#diameter_header{} = Hdr) ->
- Hdr;
-
-make_prepare_header(T) ->
- ?ERROR({invalid_header, T}).
-
-%% make_request_packet/2
-%%
-%% Reconstruct a diameter_packet from the return value of
-%% prepare_request or prepare_retransmit callback.
-
-make_request_packet(Bin, _)
- when is_binary(Bin) ->
- make_prepare_packet(false, Bin);
-
-make_request_packet(#diameter_packet{msg = [#diameter_header{} | _]}
- = Pkt,
- _) ->
- Pkt;
-
-%% Returning a diameter_packet with no header from a prepare_request
-%% or prepare_retransmit callback retains the header passed into it.
-%% This is primarily so that the end to end and hop by hop identifiers
-%% are retained.
-make_request_packet(#diameter_packet{header = Hdr} = Pkt,
- #diameter_packet{header = Hdr0}) ->
- Pkt#diameter_packet{header = fold_record(Hdr0, Hdr)};
-
-make_request_packet(Msg, Pkt) ->
- Pkt#diameter_packet{msg = Msg}.
-
-%% fold_record/2
-
-fold_record(undefined, R) ->
- R;
-fold_record(Rec, R) ->
- diameter_lib:fold_tuple(2, Rec, R).
-
-%% send_req/6
-
-send_req(Pkt0,
- {TPid, Caps, #diameter_app{dictionary = Dict} = App},
- Opts,
- {Pid, Ref},
- SvcName,
- Fs) ->
- Pkt = encode(Dict, Pkt0, Fs),
-
- #options{timeout = Timeout}
- = Opts,
-
- Req = #request{ref = Ref,
- caller = Pid,
- handler = self(),
- transport = TPid,
- caps = Caps,
- packet = Pkt0},
-
- try
- TRef = send_request(TPid, Pkt, Req, SvcName, Timeout),
- Pid ! Ref, %% tell caller a send has been attempted
- handle_answer(SvcName,
- App,
- recv_answer(Timeout, SvcName, App, Opts, {TRef, Req}))
- after
- erase_requests(Pkt)
- end.
-
-%% recv_answer/5
-
-recv_answer(Timeout, SvcName, App, Opts, {TRef, #request{ref = Ref}
- = Req}) ->
- %% Matching on TRef below ensures we ignore messages that pertain
- %% to a previous transport prior to failover. The answer message
- %% includes the #request{} since it's not necessarily Req; that
- %% is, from the last peer to which we've transmitted.
- receive
- {answer = A, Ref, Rq, Dict0, Pkt} -> %% Answer from peer
- {A, Rq, Dict0, Pkt};
- {timeout = Reason, TRef, _} -> %% No timely reply
- {error, Req, Reason};
- {failover, TRef} -> %% Service says peer has gone down
- retransmit(Req, App, Opts, find_state(SvcName), Timeout)
- end.
-
-%% Note that failover starts a new timer and that expiry of an old
-%% timer value is ignored. This means that an answer could be accepted
-%% from a peer after timeout in the case of failover.
-
-retransmit(Req, App, Opts, #state{service_name = SvcName} = S, Timeout) ->
- rt(find_transport(Req, App, Opts, S), Req, Opts, SvcName, Timeout);
-
-retransmit(Req, _, _, false, _) -> %% service has gone down
- {error, Req, failover}.
-
-rt({_,_,App} = Transport, Req, Opts, SvcName, Timeout) ->
- try retransmit(Transport, Req, SvcName, Timeout) of
- T -> recv_answer(Timeout, SvcName, App, Opts, T)
- catch
- ?FAILURE(Reason) -> {error, Req, Reason}
- end;
-
-rt(_, Req, _, _, _) -> %% no alternate peer
- {error, Req, failover}.
-
-%% handle_error/4
-
-handle_error(App,
- #request{packet = Pkt,
- transport = TPid,
- caps = Caps},
- Reason,
- SvcName) ->
- cb(App, handle_error, [Reason, msg(Pkt), SvcName, {TPid, Caps}]).
-
-msg(#diameter_packet{msg = undefined, bin = Bin}) ->
- Bin;
-msg(#diameter_packet{msg = Msg}) ->
- Msg.
-
-%% encode/3
-
-encode(Dict, Pkt, Fs) ->
- P = encode(Dict, Pkt),
- eval_packet(P, Fs),
- P.
-
-%% encode/2
-
-%% Note that prepare_request can return a diameter_packet containing a
-%% header or transport_data. Even allow the returned record to contain
-%% an encoded binary. This isn't the usual case and doesn't properly
-%% support retransmission but is useful for test.
-
-%% A message to be encoded.
-encode(Dict, #diameter_packet{bin = undefined} = Pkt) ->
- diameter_codec:encode(Dict, Pkt);
-
-%% An encoded binary: just send.
-encode(_, #diameter_packet{} = Pkt) ->
- Pkt.
-
-%% send_request/5
-
-send_request(TPid, #diameter_packet{bin = Bin} = Pkt, Req, SvcName, Timeout)
- when node() == node(TPid) ->
- %% Store the outgoing request before sending to avoid a race with
- %% reply reception.
- TRef = store_request(TPid, Bin, Req, Timeout, SvcName),
- send(TPid, Pkt),
- TRef;
-
-%% Send using a remote transport: spawn a process on the remote node
-%% to relay the answer.
-send_request(TPid, #diameter_packet{} = Pkt, Req, SvcName, Timeout) ->
- TRef = erlang:start_timer(Timeout, self(), timeout),
- T = {TPid, Pkt, Req, SvcName, Timeout, TRef},
- spawn(node(TPid), ?MODULE, send, [T]),
- TRef.
-
-%% send/1
-
-send({TPid, Pkt, #request{handler = Pid} = Req, SvcName, Timeout, TRef}) ->
- Ref = send_request(TPid,
- Pkt,
- Req#request{handler = self()},
- SvcName,
- Timeout),
- Pid ! reref(receive T -> T end, Ref, TRef).
-
-reref({T, Ref, R}, Ref, TRef) ->
- {T, TRef, R};
-reref(T, _, _) ->
- T.
-
-%% send/2
-
-send(Pid, Pkt) ->
- Pid ! {send, Pkt}.
-
-%% retransmit/4
-
-retransmit({TPid, Caps, App}
- = Transport,
- #request{packet = Pkt0}
- = Req,
- SvcName,
- Timeout) ->
- have_request(Pkt0, TPid) %% Don't failover to a peer we've
- andalso ?THROW(timeout), %% already sent to.
-
- #diameter_packet{header = Hdr0} = Pkt0,
- Hdr = Hdr0#diameter_header{is_retransmitted = true},
- Pkt = Pkt0#diameter_packet{header = Hdr},
-
- retransmit(cb(App, prepare_retransmit, [Pkt, SvcName, {TPid, Caps}]),
- Transport,
- Req#request{packet = Pkt},
- SvcName,
- Timeout,
- []).
-
-retransmit({send, Msg},
- Transport,
- #request{packet = Pkt}
- = Req,
- SvcName,
- Timeout,
- Fs) ->
- resend_request(make_request_packet(Msg, Pkt),
- Transport,
- Req,
- SvcName,
- Timeout,
- Fs);
-
-retransmit({discard, Reason}, _, _, _, _, _) ->
- ?THROW(Reason);
-
-retransmit(discard, _, _, _, _, _) ->
- ?THROW(discarded);
-
-retransmit({eval_packet, RC, F}, Transport, Req, SvcName, Timeout, Fs) ->
- retransmit(RC, Transport, Req, SvcName, Timeout, [F|Fs]);
-
-retransmit(T, {_, _, App}, _, _, _, _) ->
- ?ERROR({invalid_return, prepare_retransmit, App, T}).
-
-resend_request(Pkt0,
- {TPid, Caps, #diameter_app{dictionary = Dict}},
- Req0,
- SvcName,
- Tmo,
- Fs) ->
- Pkt = encode(Dict, Pkt0, Fs),
-
- Req = Req0#request{transport = TPid,
- packet = Pkt0,
- caps = Caps},
-
- ?LOG(retransmission, Req),
- TRef = send_request(TPid, Pkt, Req, SvcName, Tmo),
- {TRef, Req}.
-
-%% store_request/5
-
-store_request(TPid, Bin, Req, Timeout, SvcName) ->
- Seqs = diameter_codec:sequence_numbers(Bin),
- TRef = erlang:start_timer(Timeout, self(), timeout),
- ets:insert(?REQUEST_TABLE, {Seqs, Req, TRef}),
- ets:member(?REQUEST_TABLE, TPid)
- orelse failover(whois(SvcName), TRef, Seqs),
- TRef.
-
-%% Induce failover for a request that was stored after a transport
-%% went down and which the service may have missed.
-failover(Pid, TRef, Seqs) ->
- is_pid(Pid) andalso (Pid ! {failover, TRef, Seqs}).
-
-%% lookup_request/2
-
-lookup_request(Msg, TPid)
- when is_pid(TPid) ->
- lookup(Msg, TPid, '_');
-
-lookup_request(Msg, TRef)
- when is_reference(TRef) ->
- lookup(Msg, '_', TRef).
-
-lookup(Msg, TPid, TRef) ->
- Seqs = diameter_codec:sequence_numbers(Msg),
- Spec = [{{Seqs, #request{transport = TPid, _ = '_'}, TRef},
- [],
- ['$_']}],
- case ets:select(?REQUEST_TABLE, Spec) of
- [{_, Req, _}] ->
- Req;
- [] ->
- false
- end.
-
-%% erase_requests/1
-
-erase_requests(Pkt) ->
- ets:delete(?REQUEST_TABLE, diameter_codec:sequence_numbers(Pkt)).
-
-%% match_requests/1
-
-match_requests(TPid) ->
- Pat = {'_', #request{transport = TPid, _ = '_'}, '_'},
- ets:select(?REQUEST_TABLE, [{Pat, [], ['$_']}]).
-
-%% have_request/2
-
-have_request(Pkt, TPid) ->
- Seqs = diameter_codec:sequence_numbers(Pkt),
- Pat = {Seqs, #request{transport = TPid, _ = '_'}, '_'},
- '$end_of_table' /= ets:select(?REQUEST_TABLE, [{Pat, [], ['$_']}], 1).
-
-%% request_peer_up/1
-
-%% Insert an element that is used to detect whether or not there has
-%% been a failover when inserting an outgoing request.
-request_peer_up(TPid) ->
- ets:insert(?REQUEST_TABLE, {TPid}).
-
-%% request_peer_down/1
-
-request_peer_down(TPid) ->
- ets:delete(?REQUEST_TABLE, TPid),
- lists:foreach(fun failover/1, match_requests(TPid)).
-%% Note that a request process can store its request after failover
-%% notifications are sent here: store_request/4 sends the notification
-%% in that case.
-
-%% ---------------------------------------------------------------------------
-%% recv_request/4
-%% ---------------------------------------------------------------------------
-
-recv_request(TPid, Pkt, Dict0, #recvdata{peerT = PeerT} = RecvData) ->
- try ets:lookup(PeerT, TPid) of
- [Pr] ->
- recv_request(Pr, TPid, Pkt, Dict0, RecvData);
- [] -> %% transport has gone down
- ok
- catch
- error: badarg -> %% service has gone down (and taken table with it)
- ok
- end.
-
-%% recv_request/5
-
-recv_request(#peer{apps = SApps, caps = Caps},
- TPid,
- Pkt,
- Dict0,
- RecvData) ->
- #diameter_packet{header = #diameter_header{application_id = Id}}
- = Pkt,
-
- recv_request(find_recv_app(Id, SApps),
- TPid,
- Caps,
- Pkt,
- Dict0,
- RecvData).
-
-%% find_recv_app/2
-
-%% No one should be sending the relay identifier.
-find_recv_app(?APP_ID_RELAY, _) ->
- false;
-
-%% With any other id, must either support it or be a relay.
-find_recv_app(Id, SApps) ->
- keyfind([Id, ?APP_ID_RELAY], 1, SApps).
-
-%% keyfind/3
-
-keyfind([], _, _) ->
- false;
-keyfind([Key | Rest], Pos, L) ->
- case lists:keyfind(Key, Pos, L) of
- false ->
- keyfind(Rest, Pos, L);
- T ->
- T
- end.
-
-%% recv_request/6
-
-recv_request({Id, Alias}, TPid, Caps, Pkt, Dict0, RecvData) ->
- #diameter_app{dictionary = Dict}
- = App
- = find_app(Alias, RecvData#recvdata.apps),
- recv_req(App,
- TPid,
- Caps,
- Dict0,
- RecvData,
- diameter_codec:decode(Id, Dict, Pkt));
-%% Note that the decode is different depending on whether or not Id is
-%% ?APP_ID_RELAY.
-
-%% DIAMETER_APPLICATION_UNSUPPORTED 3007
-%% A request was sent for an application that is not supported.
-
-recv_request(false, TPid, Caps, Pkt, Dict0, _) ->
- As = collect_avps(Pkt),
- protocol_error(3007, TPid, Caps, Dict0, Pkt#diameter_packet{avps = As}).
-
-collect_avps(Pkt) ->
- case diameter_codec:collect_avps(Pkt) of
- {_Bs, As} ->
- As;
- As ->
- As
- end.
-
-%% recv_req/6
-
-%% Wrong number of bits somewhere in the message: reply.
-%%
-%% DIAMETER_INVALID_AVP_BITS 3009
-%% A request was received that included an AVP whose flag bits are
-%% set to an unrecognized value, or that is inconsistent with the
-%% AVP's definition.
-%%
-recv_req(_App,
- TPid,
- Caps,
- Dict0,
- _RecvData,
- #diameter_packet{errors = [Bs | _]} = Pkt)
- when is_bitstring(Bs) ->
- protocol_error(3009, TPid, Caps, Dict0, Pkt);
-
-%% Either we support this application but don't recognize the command
-%% or we're a relay and the command isn't proxiable.
-%%
-%% DIAMETER_COMMAND_UNSUPPORTED 3001
-%% The Request contained a Command-Code that the receiver did not
-%% recognize or support. This MUST be used when a Diameter node
-%% receives an experimental command that it does not understand.
-%%
-recv_req(#diameter_app{id = Id},
- TPid,
- Caps,
- Dict0,
- _RecvData,
- #diameter_packet{header = #diameter_header{is_proxiable = P},
- msg = M}
- = Pkt)
- when ?APP_ID_RELAY /= Id, undefined == M;
- ?APP_ID_RELAY == Id, not P ->
- protocol_error(3001, TPid, Caps, Dict0, Pkt);
-
-%% Error bit was set on a request.
-%%
-%% DIAMETER_INVALID_HDR_BITS 3008
-%% A request was received whose bits in the Diameter header were
-%% either set to an invalid combination, or to a value that is
-%% inconsistent with the command code's definition.
-%%
-recv_req(_App,
- TPid,
- Caps,
- Dict0,
- _RecvData,
- #diameter_packet{header = #diameter_header{is_error = true}}
- = Pkt) ->
- protocol_error(3008, TPid, Caps, Dict0, Pkt);
-
-%% A message in a locally supported application or a proxiable message
-%% in the relay application. Don't distinguish between the two since
-%% each application has its own callback config. That is, the user can
-%% easily distinguish between the two cases.
-recv_req(App, TPid, Caps, Dict0, RecvData, Pkt) ->
- request_cb(App, TPid, Caps, Dict0, RecvData, examine(Pkt)).
-
-%% Note that there may still be errors but these aren't protocol
-%% (3xxx) errors that lead to an answer-message.
-
-request_cb(App,
- TPid,
- Caps,
- Dict0,
- #recvdata{service_name = SvcName}
- = RecvData,
- Pkt) ->
- request_cb(cb(App, handle_request, [Pkt, SvcName, {TPid, Caps}]),
- App,
- TPid,
- Caps,
- Dict0,
- RecvData,
- [],
- Pkt).
-
-%% examine/1
-%%
-%% Look for errors in a decoded message. Length errors result in
-%% decode failure in diameter_codec.
-
-examine(#diameter_packet{header = #diameter_header{version
- = ?DIAMETER_VERSION}}
- = Pkt) ->
- Pkt;
-
-%% DIAMETER_UNSUPPORTED_VERSION 5011
-%% This error is returned when a request was received, whose version
-%% number is unsupported.
-
-examine(#diameter_packet{errors = Es} = Pkt) ->
- Pkt#diameter_packet{errors = [5011 | Es]}.
-%% It's odd/unfortunate that this isn't a protocol error.
-
-%% request_cb/8
-
-%% A reply may be an answer-message, constructed either here or by
-%% the handle_request callback. The header from the incoming request
-%% is passed into the encode so that it can retrieve the relevant
-%% command code in this case. It will also then ignore Dict and use
-%% the base encoder.
-request_cb({reply, Ans},
- #diameter_app{dictionary = Dict},
- TPid,
- _Caps,
- Dict0,
- _RecvData,
- Fs,
- Pkt) ->
- reply(Ans, dict(Dict, Dict0, Ans), TPid, Fs, Pkt);
-
-%% An 3xxx result code, for which the E-bit is set in the header.
-request_cb({protocol_error, RC},
- _App,
- TPid,
- Caps,
- Dict0,
- _RecvData,
- Fs,
- Pkt)
- when 3000 =< RC, RC < 4000 ->
- protocol_error(RC, TPid, Caps, Dict0, Fs, Pkt);
-
-%% RFC 3588 says we must reply 3001 to anything unrecognized or
-%% unsupported. 'noreply' is undocumented (and inappropriately named)
-%% backwards compatibility for this, protocol_error the documented
-%% alternative.
-request_cb(noreply,
- _App,
- TPid,
- Caps,
- Dict0,
- _RecvData,
- Fs,
- Pkt) ->
- protocol_error(3001, TPid, Caps, Dict0, Fs, Pkt);
-
-%% Relay a request to another peer. This is equivalent to doing an
-%% explicit call/4 with the message in question except that (1) a loop
-%% will be detected by examining Route-Record AVP's, (3) a
-%% Route-Record AVP will be added to the outgoing request and (3) the
-%% End-to-End Identifier will default to that in the
-%% #diameter_header{} without the need for an end_to_end_identifier
-%% option.
-%%
-%% relay and proxy are similar in that they require the same handling
-%% with respect to Route-Record and End-to-End identifier. The
-%% difference is that a proxy advertises specific applications, while
-%% a relay advertises the relay application. If a callback doesn't
-%% want to distinguish between the cases in the callback return value
-%% then 'resend' is a neutral alternative.
-%%
-request_cb({A, Opts},
- #diameter_app{id = Id}
- = App,
- TPid,
- Caps,
- Dict0,
- RecvData,
- Fs,
- Pkt)
- when A == relay, Id == ?APP_ID_RELAY;
- A == proxy, Id /= ?APP_ID_RELAY;
- A == resend ->
- resend(Opts, App, TPid, Caps, Dict0, RecvData, Fs, Pkt);
-
-request_cb(discard, _, _, _, _, _, _, _) ->
- ok;
-
-request_cb({eval_packet, RC, F}, App, TPid, Caps, Dict0, RecvData, Fs, Pkt) ->
- request_cb(RC, App, TPid, Caps, Dict0, RecvData, [F|Fs], Pkt);
-
-request_cb({eval, RC, F}, App, TPid, Caps, Dict0, RecvData, Fs, Pkt) ->
- request_cb(RC, App, TPid, Caps, Dict0, RecvData, Fs, Pkt),
- diameter_lib:eval(F).
-
-%% dict/3
-
-%% An incoming answer, not yet decoded.
-dict(Dict, Dict0, #diameter_packet{header
- = #diameter_header{is_request = false,
- is_error = E},
- msg = undefined}) ->
- if E -> Dict0; true -> Dict end;
-
-dict(Dict, Dict0, [Msg]) ->
- dict(Dict, Dict0, Msg);
-
-dict(Dict, Dict0, #diameter_packet{msg = Msg}) ->
- dict(Dict, Dict0, Msg);
-
-dict(_Dict, Dict0, ['answer-message' | _]) ->
- Dict0;
-
-dict(Dict, Dict0, Rec) ->
- try
- 'answer-message' = Dict0:rec2msg(element(1,Rec)),
- Dict0
- catch
- error:_ -> Dict
- end.
-
-%% protocol_error/6
-
-protocol_error(RC, TPid, Caps, Dict0, Fs, Pkt) ->
- #diameter_caps{origin_host = {OH,_},
- origin_realm = {OR,_}}
- = Caps,
- #diameter_packet{avps = Avps, errors = Es}
- = Pkt,
-
- ?LOG({error, RC}, Pkt),
- reply(answer_message({OH, OR, RC}, Dict0, Avps),
- Dict0,
- TPid,
- Fs,
- Pkt#diameter_packet{errors = [RC | Es]}).
-%% Note that reply/5 may set the result code once more. It's set in
-%% answer_message/3 in case reply/5 doesn't.
-
-%% protocol_error/5
-
-protocol_error(RC, TPid, Caps, Dict0, Pkt) ->
- protocol_error(RC, TPid, Caps, Dict0, [], Pkt).
-
-%% resend/7
-%%
-%% Resend a message as a relay or proxy agent.
-
-resend(Opts,
- #diameter_app{}
- = App,
- TPid,
- #diameter_caps{origin_host = {OH,_}}
- = Caps,
- Dict0,
- RecvData,
- Fs,
- #diameter_packet{avps = Avps}
- = Pkt) ->
- {Code, _Flags, Vid} = Dict0:avp_header('Route-Record'),
- resend(is_loop(Code, Vid, OH, Dict0, Avps),
- Opts,
- App,
- TPid,
- Caps,
- Dict0,
- RecvData,
- Fs,
- Pkt).
-
-%% DIAMETER_LOOP_DETECTED 3005
-%% An agent detected a loop while trying to get the message to the
-%% intended recipient. The message MAY be sent to an alternate peer,
-%% if one is available, but the peer reporting the error has
-%% identified a configuration problem.
-
-resend(true, _Opts, _App, TPid, Caps, Dict0, _RecvData, Fs, Pkt) ->
- protocol_error(3005, TPid, Caps, Dict0, Fs, Pkt);
-
-%% 6.1.8. Relaying and Proxying Requests
-%%
-%% A relay or proxy agent MUST append a Route-Record AVP to all requests
-%% forwarded. The AVP contains the identity of the peer the request was
-%% received from.
-
-resend(false,
- Opts,
- App,
- TPid,
- #diameter_caps{origin_host = {_,OH}}
- = Caps,
- Dict0,
- #recvdata{service_name = SvcName,
- sequence = Mask},
- Fs,
- #diameter_packet{header = Hdr0,
- avps = Avps}
- = Pkt) ->
- Route = #diameter_avp{data = {Dict0, 'Route-Record', OH}},
- Seq = diameter_session:sequence(Mask),
- Hdr = Hdr0#diameter_header{hop_by_hop_id = Seq},
- Msg = [Hdr, Route | Avps],
- resend(call(SvcName, App, Msg, Opts), TPid, Caps, Dict0, Fs, Pkt).
-%% The incoming request is relayed with the addition of a
-%% Route-Record. Note the requirement on the return from call/4 below,
-%% which places a requirement on the value returned by the
-%% handle_answer callback of the application module in question.
-%%
-%% Note that there's nothing stopping the request from being relayed
-%% back to the sender. A pick_peer callback may want to avoid this but
-%% a smart peer might recognize the potential loop and choose another
-%% route. A less smart one will probably just relay the request back
-%% again and force us to detect the loop. A pick_peer that wants to
-%% avoid this can specify filter to avoid the possibility.
-%% Eg. {neg, {host, OH} where #diameter_caps{origin_host = {OH, _}}.
-%%
-%% RFC 6.3 says that a relay agent does not modify Origin-Host but
-%% says nothing about a proxy. Assume it should behave the same way.
-
-%% resend/6
-%%
-%% Relay a reply to a relayed request.
-
-%% Answer from the peer: reset the hop by hop identifier and send.
-resend(#diameter_packet{bin = B}
- = Pkt,
- TPid,
- _Caps,
- _Dict0,
- Fs,
- #diameter_packet{header = #diameter_header{hop_by_hop_id = Id},
- transport_data = TD}) ->
- P = Pkt#diameter_packet{bin = diameter_codec:hop_by_hop_id(Id, B),
- transport_data = TD},
- eval_packet(P, Fs),
- send(TPid, P);
-%% TODO: counters
-
-%% Or not: DIAMETER_UNABLE_TO_DELIVER.
-resend(_, TPid, Caps, Dict0, Fs, Pkt) ->
- protocol_error(3002, TPid, Caps, Dict0, Fs, Pkt).
-
-%% is_loop/5
-%%
-%% Is there a Route-Record AVP with our Origin-Host?
-
-is_loop(Code,
- Vid,
- Bin,
- _Dict0,
- [#diameter_avp{code = Code, vendor_id = Vid, data = Bin} | _]) ->
- true;
-
-is_loop(_, _, _, _, []) ->
- false;
-
-is_loop(Code, Vid, OH, Dict0, [_ | Avps])
- when is_binary(OH) ->
- is_loop(Code, Vid, OH, Dict0, Avps);
-
-is_loop(Code, Vid, OH, Dict0, Avps) ->
- is_loop(Code, Vid, Dict0:avp(encode, OH, 'Route-Record'), Dict0, Avps).
-
-%% reply/5
-%%
-%% Send a locally originating reply.
-
-%% Skip the setting of Result-Code and Failed-AVP's below. This is
-%% currently undocumented.
-reply([Msg], Dict, TPid, Fs, Pkt)
- when is_list(Msg);
- is_tuple(Msg) ->
- reply(Msg, Dict, TPid, Fs, Pkt#diameter_packet{errors = []});
-
-%% No errors or a diameter_header/avp list.
-reply(Msg, Dict, TPid, Fs, #diameter_packet{errors = Es} = ReqPkt)
- when [] == Es;
- is_record(hd(Msg), diameter_header) ->
- Pkt = encode(Dict, make_answer_packet(Msg, ReqPkt), Fs),
- incr(send, Pkt, Dict, TPid), %% count result codes in sent answers
- send(TPid, Pkt);
-
-%% Or not: set Result-Code and Failed-AVP AVP's.
-reply(Msg, Dict, TPid, Fs, #diameter_packet{errors = [H|_] = Es} = Pkt) ->
- reply(rc(Msg, rc(H), [A || {_,A} <- Es], Dict),
- Dict,
- TPid,
- Fs,
- Pkt#diameter_packet{errors = []}).
-
-eval_packet(Pkt, Fs) ->
- lists:foreach(fun(F) -> diameter_lib:eval([F,Pkt]) end, Fs).
-
-%% make_answer_packet/2
-
-%% A reply message clears the R and T flags and retains the P flag.
-%% The E flag will be set at encode. 6.2 of 3588 requires the same P
-%% flag on an answer as on the request. A #diameter_packet{} returned
-%% from a handle_request callback can circumvent this by setting its
-%% own header values.
-make_answer_packet(#diameter_packet{header = Hdr,
- msg = Msg,
- transport_data = TD},
- #diameter_packet{header = ReqHdr}) ->
- Hdr0 = ReqHdr#diameter_header{version = ?DIAMETER_VERSION,
- is_request = false,
- is_error = undefined,
- is_retransmitted = false},
- #diameter_packet{header = fold_record(Hdr0, Hdr),
- msg = Msg,
- transport_data = TD};
-
-%% Binaries and header/avp lists are sent as-is.
-make_answer_packet(Bin, #diameter_packet{transport_data = TD})
- when is_binary(Bin) ->
- #diameter_packet{bin = Bin,
- transport_data = TD};
-make_answer_packet([#diameter_header{} | _] = Msg,
- #diameter_packet{transport_data = TD}) ->
- #diameter_packet{msg = Msg,
- transport_data = TD};
-
-%% Otherwise, preserve transport_data.
-make_answer_packet(Msg, #diameter_packet{transport_data = TD} = Pkt) ->
- make_answer_packet(#diameter_packet{msg = Msg, transport_data = TD}, Pkt).
-
-%% rc/1
-
-rc({RC, _}) ->
- RC;
-rc(RC) ->
- RC.
-
-%% rc/4
-
-rc(#diameter_packet{msg = Rec} = Pkt, RC, Failed, DictT) ->
- Pkt#diameter_packet{msg = rc(Rec, RC, Failed, DictT)};
-
-rc(Rec, RC, Failed, DictT)
- when is_integer(RC) ->
- set(Rec,
- lists:append([rc(Rec, {'Result-Code', RC}, DictT),
- failed_avp(Rec, Failed, DictT)]),
- DictT).
-
-%% Reply as name and tuple list ...
-set([_|_] = Ans, Avps, _) ->
- Ans ++ Avps; %% Values nearer tail take precedence.
-
-%% ... or record.
-set(Rec, Avps, Dict) ->
- Dict:'#set-'(Avps, Rec).
-
-%% rc/3
-%%
-%% Turn the result code into a list if its optional and only set it if
-%% the arity is 1 or {0,1}. In other cases (which probably shouldn't
-%% exist in practise) we can't know what's appropriate.
-
-rc([MsgName | _], {'Result-Code' = K, RC} = T, Dict) ->
- case Dict:avp_arity(MsgName, 'Result-Code') of
- 1 -> [T];
- {0,1} -> [{K, [RC]}];
- _ -> []
- end;
-
-rc(Rec, T, Dict) ->
- rc([Dict:rec2msg(element(1, Rec))], T, Dict).
-
-%% failed_avp/3
-
-failed_avp(_, [] = No, _) ->
- No;
-
-failed_avp(Rec, Failed, Dict) ->
- [fa(Rec, [{'AVP', Failed}], Dict)].
-
-%% Reply as name and tuple list ...
-fa([MsgName | Values], FailedAvp, Dict) ->
- R = Dict:msg2rec(MsgName),
- try
- Dict:'#info-'(R, {index, 'Failed-AVP'}),
- {'Failed-AVP', [FailedAvp]}
- catch
- error: _ ->
- Avps = proplists:get_value('AVP', Values, []),
- A = #diameter_avp{name = 'Failed-AVP',
- value = FailedAvp},
- {'AVP', [A|Avps]}
- end;
-
-%% ... or record.
-fa(Rec, FailedAvp, Dict) ->
- try
- {'Failed-AVP', [FailedAvp]}
- catch
- error: _ ->
- Avps = Dict:'get-'('AVP', Rec),
- A = #diameter_avp{name = 'Failed-AVP',
- value = FailedAvp},
- {'AVP', [A|Avps]}
- end.
-
-%% 3. Diameter Header
-%%
-%% E(rror) - If set, the message contains a protocol error,
-%% and the message will not conform to the ABNF
-%% described for this command. Messages with the 'E'
-%% bit set are commonly referred to as error
-%% messages. This bit MUST NOT be set in request
-%% messages. See Section 7.2.
-
-%% 3.2. Command Code ABNF specification
-%%
-%% e-bit = ", ERR"
-%% ; If present, the 'E' bit in the Command
-%% ; Flags is set, indicating that the answer
-%% ; message contains a Result-Code AVP in
-%% ; the "protocol error" class.
-
-%% 7.1.3. Protocol Errors
-%%
-%% Errors that fall within the Protocol Error category SHOULD be treated
-%% on a per-hop basis, and Diameter proxies MAY attempt to correct the
-%% error, if it is possible. Note that these and only these errors MUST
-%% only be used in answer messages whose 'E' bit is set.
-
-%% Thus, only construct answers to protocol errors. Other errors
-%% require an message-specific answer and must be handled by the
-%% application.
-
-%% 6.2. Diameter Answer Processing
-%%
-%% When a request is locally processed, the following procedures MUST be
-%% applied to create the associated answer, in addition to any
-%% additional procedures that MAY be discussed in the Diameter
-%% application defining the command:
-%%
-%% - The same Hop-by-Hop identifier in the request is used in the
-%% answer.
-%%
-%% - The local host's identity is encoded in the Origin-Host AVP.
-%%
-%% - The Destination-Host and Destination-Realm AVPs MUST NOT be
-%% present in the answer message.
-%%
-%% - The Result-Code AVP is added with its value indicating success or
-%% failure.
-%%
-%% - If the Session-Id is present in the request, it MUST be included
-%% in the answer.
-%%
-%% - Any Proxy-Info AVPs in the request MUST be added to the answer
-%% message, in the same order they were present in the request.
-%%
-%% - The 'P' bit is set to the same value as the one in the request.
-%%
-%% - The same End-to-End identifier in the request is used in the
-%% answer.
-%%
-%% Note that the error messages (see Section 7.3) are also subjected to
-%% the above processing rules.
-
-%% 7.3. Error-Message AVP
-%%
-%% The Error-Message AVP (AVP Code 281) is of type UTF8String. It MAY
-%% accompany a Result-Code AVP as a human readable error message. The
-%% Error-Message AVP is not intended to be useful in real-time, and
-%% SHOULD NOT be expected to be parsed by network entities.
-
-%% answer_message/3
-
-answer_message({OH, OR, RC}, Dict0, Avps) ->
- {Code, _, Vid} = Dict0:avp_header('Session-Id'),
- ['answer-message', {'Origin-Host', OH},
- {'Origin-Realm', OR},
- {'Result-Code', RC}
- | session_id(Code, Vid, Dict0, Avps)].
-
-session_id(Code, Vid, Dict0, Avps)
- when is_list(Avps) ->
- try
- {value, #diameter_avp{data = D}} = find_avp(Code, Vid, Avps),
- [{'Session-Id', [Dict0:avp(decode, D, 'Session-Id')]}]
- catch
- error: _ ->
- []
- end.
-
-%% find_avp/3
-
-find_avp(Code, Vid, Avps)
- when is_integer(Code), (undefined == Vid orelse is_integer(Vid)) ->
- find(fun(A) -> is_avp(Code, Vid, A) end, Avps).
-
-%% The final argument here could be a list of AVP's, depending on the case,
-%% but we're only searching at the top level.
-is_avp(Code, Vid, #diameter_avp{code = Code, vendor_id = Vid}) ->
- true;
-is_avp(_, _, _) ->
- false.
-
-find(_, []) ->
- false;
-find(Pred, [H|T]) ->
- case Pred(H) of
- true ->
- {value, H};
- false ->
- find(Pred, T)
- end.
-
-%% 7. Error Handling
-%%
-%% There are certain Result-Code AVP application errors that require
-%% additional AVPs to be present in the answer. In these cases, the
-%% Diameter node that sets the Result-Code AVP to indicate the error
-%% MUST add the AVPs. Examples are:
-%%
-%% - An unrecognized AVP is received with the 'M' bit (Mandatory bit)
-%% set, causes an answer to be sent with the Result-Code AVP set to
-%% DIAMETER_AVP_UNSUPPORTED, and the Failed-AVP AVP containing the
-%% offending AVP.
-%%
-%% - An AVP that is received with an unrecognized value causes an
-%% answer to be returned with the Result-Code AVP set to
-%% DIAMETER_INVALID_AVP_VALUE, with the Failed-AVP AVP containing the
-%% AVP causing the error.
-%%
-%% - A command is received with an AVP that is omitted, yet is
-%% mandatory according to the command's ABNF. The receiver issues an
-%% answer with the Result-Code set to DIAMETER_MISSING_AVP, and
-%% creates an AVP with the AVP Code and other fields set as expected
-%% in the missing AVP. The created AVP is then added to the Failed-
-%% AVP AVP.
-%%
-%% The Result-Code AVP describes the error that the Diameter node
-%% encountered in its processing. In case there are multiple errors,
-%% the Diameter node MUST report only the first error it encountered
-%% (detected possibly in some implementation dependent order). The
-%% specific errors that can be described by this AVP are described in
-%% the following section.
-
-%% 7.5. Failed-AVP AVP
-%%
-%% The Failed-AVP AVP (AVP Code 279) is of type Grouped and provides
-%% debugging information in cases where a request is rejected or not
-%% fully processed due to erroneous information in a specific AVP. The
-%% value of the Result-Code AVP will provide information on the reason
-%% for the Failed-AVP AVP.
-%%
-%% The possible reasons for this AVP are the presence of an improperly
-%% constructed AVP, an unsupported or unrecognized AVP, an invalid AVP
-%% value, the omission of a required AVP, the presence of an explicitly
-%% excluded AVP (see tables in Section 10), or the presence of two or
-%% more occurrences of an AVP which is restricted to 0, 1, or 0-1
-%% occurrences.
-%%
-%% A Diameter message MAY contain one Failed-AVP AVP, containing the
-%% entire AVP that could not be processed successfully. If the failure
-%% reason is omission of a required AVP, an AVP with the missing AVP
-%% code, the missing vendor id, and a zero filled payload of the minimum
-%% required length for the omitted AVP will be added.
-
-%% ---------------------------------------------------------------------------
-%% # handle_answer/3
-%% ---------------------------------------------------------------------------
-
-%% Process an answer message in call-specific process.
-
-handle_answer(SvcName, App, {error, Req, Reason}) ->
- handle_error(App, Req, Reason, SvcName);
-
-handle_answer(SvcName,
- #diameter_app{dictionary = Dict}
- = App,
- {answer, Req, Dict0, Pkt}) ->
- Mod = dict(Dict, Dict0, Pkt),
- answer(examine(diameter_codec:decode(Mod, Pkt)),
- SvcName,
- Mod,
- App,
- Req).
-
-%% We don't really need to do a full decode if we're a relay and will
-%% just resend with a new hop by hop identifier, but might a proxy
-%% want to examine the answer?
-
-answer(Pkt, SvcName, Dict, App, #request{transport = TPid} = Req) ->
- try
- incr(recv, Pkt, Dict, TPid)
- of
- _ -> answer(Pkt, SvcName, App, Req)
- catch
- exit: {invalid_error_bit, _} = E ->
- answer(Pkt#diameter_packet{errors = [E]}, SvcName, App, Req)
- end.
-
-answer(Pkt,
- SvcName,
- #diameter_app{module = ModX,
- options = [{answer_errors, AE} | _]},
- Req) ->
- a(Pkt, SvcName, ModX, AE, Req).
-
-a(#diameter_packet{errors = Es}
- = Pkt,
- SvcName,
- ModX,
- AE,
- #request{transport = TPid,
- caps = Caps,
- packet = P})
- when [] == Es;
- callback == AE ->
- cb(ModX, handle_answer, [Pkt, msg(P), SvcName, {TPid, Caps}]);
-
-a(Pkt, SvcName, _, report, Req) ->
- x(errors, handle_answer, [SvcName, Req, Pkt]);
-
-a(Pkt, SvcName, _, discard, Req) ->
- x({errors, handle_answer, [SvcName, Req, Pkt]}).
-
-%% Note that we don't check that the application id in the answer's
-%% header is what we expect. (TODO: Does the rfc says anything about
-%% this?)
-
-%% incr/4
-%%
-%% Increment a stats counter for an incoming or outgoing message.
-
-%% Outgoing message as binary: don't yet count. (TODO)
-incr(_, #diameter_packet{msg = undefined}, _, _) ->
- ok;
-
-incr(recv = D, #diameter_packet{header = H, errors = [_|_]}, _, TPid) ->
- incr(TPid, {diameter_codec:msg_id(H), D, error});
-
-incr(Dir, Pkt, Dict, TPid) ->
- #diameter_packet{header = #diameter_header{is_error = E}
- = Hdr,
- msg = Rec}
- = Pkt,
-
- RC = int(get_avp_value(Dict, 'Result-Code', Rec)),
- PE = is_protocol_error(RC),
-
- %% Check that the E bit is set only for 3xxx result codes.
- (not (E orelse PE))
- orelse (E andalso PE)
- orelse x({invalid_error_bit, RC}, answer, [Dir, Pkt]),
-
- irc(TPid, Hdr, Dir, rc_counter(Dict, Rec, RC)).
-
-irc(_, _, _, undefined) ->
- false;
-
-irc(TPid, Hdr, Dir, Ctr) ->
- incr(TPid, {diameter_codec:msg_id(Hdr), Dir, Ctr}).
-
-%% incr/2
-
-incr(TPid, Counter) ->
- diameter_stats:incr(Counter, TPid, 1).
-
-%% error_counter/2
-
-%% RFC 3588, 7.6:
-%%
-%% All Diameter answer messages defined in vendor-specific
-%% applications MUST include either one Result-Code AVP or one
-%% Experimental-Result AVP.
-%%
-%% Maintain statistics assuming one or the other, not both, which is
-%% surely the intent of the RFC.
-
-rc_counter(Dict, Rec, undefined) ->
- er(get_avp_value(Dict, 'Experimental-Result', Rec));
-rc_counter(_, _, RC) ->
- {'Result-Code', RC}.
-
-%% Outgoing answers may be in any of the forms messages can be sent
-%% in. Incoming messages will be records. We're assuming here that the
-%% arity of the result code AVP's is 0 or 1.
-
-er([{_,_,N} = T | _])
- when is_integer(N) ->
- T;
-er({_,_,N} = T)
- when is_integer(N) ->
- T;
-er(_) ->
- undefined.
-
-%% Extract the first good looking integer. There's no guarantee
-%% that what we're looking for has arity 1.
-int([N|_])
- when is_integer(N) ->
- N;
-int(N)
- when is_integer(N) ->
- N;
-int(_) ->
- undefined.
-
-is_protocol_error(RC) ->
- 3000 =< RC andalso RC < 4000.
-
--spec x(any(), atom(), list()) -> no_return().
-
-%% Warn and exit request process on errors in an incoming answer.
-x(Reason, F, A) ->
- diameter_lib:warning_report(Reason, {?MODULE, F, A}),
- x(Reason).
-
-x(T) ->
- exit(T).
-
-%% ---------------------------------------------------------------------------
-%% # failover/1-2
-%% ---------------------------------------------------------------------------
-
-%% Failover as a consequence of request_peer_down/1: inform the
-%% request process.
-failover({_, Req, TRef}) ->
- #request{handler = Pid,
- packet = #diameter_packet{msg = M}}
- = Req,
- M /= undefined andalso (Pid ! {failover, TRef}).
-%% Failover is not performed when msg = binary() since sending
-%% pre-encoded binaries is only partially supported. (Mostly for
-%% test.)
-
-%% Failover as a consequence of store_request/4.
-failover(TRef, Seqs)
- when is_reference(TRef) ->
- case lookup_request(Seqs, TRef) of
- #request{} = Req ->
- failover({Seqs, Req, TRef});
- false ->
- ok
- end.
-
-%% ---------------------------------------------------------------------------
%% # report_status/5
%% ---------------------------------------------------------------------------
@@ -2693,152 +1301,19 @@ rpd(Pid, Alias, PDict) ->
?Dict:update(Alias, fun(Ps) -> lists:keydelete(Pid, 1, Ps) end, PDict).
%% ---------------------------------------------------------------------------
-%% find_transport/4
-%%
-%% Return: {TransportPid, #diameter_caps{}, #diameter_app{}}
-%% | false
-%% | {error, Reason}
-%% ---------------------------------------------------------------------------
-
-%% Initial call, from an arbitrary process.
-find_transport({alias, Alias},
- Msg,
- Opts,
- #state{service = #diameter_service{applications = Apps}}
- = S) ->
- find_transport(find_send_app(Alias, Apps), Msg, Opts, S);
-
-%% Relay or proxy send.
-find_transport(#diameter_app{module = ModX, dictionary = Dict}
- = App,
- Msg,
- #options{filter = Filter,
- extra = Xtra},
- S) ->
- pick_peer(App#diameter_app{module = ModX ++ Xtra},
- get_destination(Dict, Msg),
- Filter,
- S);
-
-%% Retransmission after failover.
-find_transport(#request{packet = #diameter_packet{msg = Msg}},
- #diameter_app{dictionary = Dict}
- = App,
- #options{filter = Filter},
- S)
- when Msg /= undefined -> %% retransmission of binaries is unsupported
- pick_peer(App,
- get_destination(Dict, Msg),
- Filter,
- S);
-
-find_transport(_, _, _, _) ->
- false.
-
-find_send_app(Alias, Apps) ->
- case find_app(Alias, Apps) of
- #diameter_app{id = ?APP_ID_RELAY} ->
- false;
- #diameter_app{} = A ->
- A;
- false = No ->
- No
- end.
-
-%% get_destination/2
-
-get_destination(Dict, Msg) ->
- [str(get_avp_value(Dict, 'Destination-Realm', Msg)),
- str(get_avp_value(Dict, 'Destination-Host', Msg))].
-
-%% This is not entirely correct. The avp could have an arity 1, in
-%% which case an empty list is a DiameterIdentity of length 0 rather
-%% than the list of no values we treat it as by mapping to undefined.
-%% This behaviour is documented.
-str([]) ->
- undefined;
-str(T) ->
- T.
-
-%% get_avp_value/3
-%%
-%% Find an AVP in a message of one of three forms:
-%%
-%% - a message record (as generated from a .dia spec) or
-%% - a list of an atom message name followed by 2-tuple, avp name/value pairs.
-%% - a list of a #diameter_header{} followed by #diameter_avp{} records,
-%%
-%% In the first two forms a dictionary module is used at encode to
-%% identify the type of the AVP and its arity in the message in
-%% question. The third form allows messages to be sent as is, without
-%% a dictionary, which is needed in the case of relay agents, for one.
-
-%% Messages will be header/avps list as a relay and the only AVP's we
-%% look for are in the common dictionary. This is required since the
-%% relay dictionary doesn't inherit the common dictionary (which maybe
-%% it should).
-get_avp_value(?RELAY, Name, Msg) ->
- get_avp_value(?BASE, Name, Msg);
-
-%% Message sent as a header/avps list, probably a relay case but not
-%% necessarily.
-get_avp_value(Dict, Name, [#diameter_header{} | Avps]) ->
- try
- {Code, _, VId} = Dict:avp_header(Name),
- [A|_] = lists:dropwhile(fun(#diameter_avp{code = C, vendor_id = V}) ->
- C /= Code orelse V /= VId
- end,
- Avps),
- avp_decode(Dict, Name, A)
- catch
- error: _ ->
- undefined
- end;
-
-%% Outgoing message as a name/values list.
-get_avp_value(_, Name, [_MsgName | Avps]) ->
- case lists:keyfind(Name, 1, Avps) of
- {_, V} ->
- V;
- _ ->
- undefined
- end;
-
-%% Message is typically a record but not necessarily.
-get_avp_value(Dict, Name, Rec) ->
- try
- Dict:'#get-'(Name, Rec)
- catch
- error:_ ->
- undefined
- end.
-
-avp_decode(Dict, Name, #diameter_avp{value = undefined,
- data = Bin}) ->
- Dict:avp(decode, Bin, Name);
-avp_decode(_, _, #diameter_avp{value = V}) ->
- V.
-
-%% ---------------------------------------------------------------------------
-%% # pick_peer/4
-%%
-%% Return: {TransportPid, #diameter_caps{}, App}
-%% | false
-%% | {error, Reason}
+%% pick_peer/4
%% ---------------------------------------------------------------------------
-%% Find transports to a given realm/host.
-
pick_peer(#diameter_app{alias = Alias}
= App,
- [_Realm ,_Host] = RH,
+ RealmAndHost,
Filter,
#state{local_peers = L,
shared_peers = S,
service_name = SvcName,
service = #diameter_service{pid = Pid}}) ->
- pick_peer(peers(Alias, RH, Filter, L),
- peers(Alias, RH, Filter, S),
+ pick_peer(peers(Alias, RealmAndHost, Filter, L),
+ peers(Alias, RealmAndHost, Filter, S),
Pid,
SvcName,
App).
@@ -2851,7 +1326,12 @@ pick_peer([], [], _, _, _) ->
%% App state is mutable but we're not in the service process: go there.
pick_peer(Local, Remote, Pid, _SvcName, #diameter_app{mutable = true} = App)
when self() /= Pid ->
- call_service(Pid, {pick_peer, Local, Remote, App});
+ case call_service(Pid, {pick_peer, Local, Remote, App}) of
+ {TPid, _} = T when is_pid(TPid) ->
+ T;
+ {error, _} ->
+ false
+ end;
%% App state isn't mutable or it is and we're in the service process:
%% do the deed.
@@ -2859,19 +1339,18 @@ pick_peer(Local,
Remote,
_Pid,
SvcName,
- #diameter_app{module = ModX,
- alias = Alias,
+ #diameter_app{alias = Alias,
init_state = S,
mutable = M}
= App) ->
- MFA = {ModX, pick_peer, [Local, Remote, SvcName]},
+ Args = [Local, Remote, SvcName],
- try state_cb(App, MFA) of
- {ok, {TPid, #diameter_caps{} = Caps}} when is_pid(TPid) ->
- {TPid, Caps, App};
- {{TPid, #diameter_caps{} = Caps}, ModS} when is_pid(TPid), M ->
+ try state_cb(App, pick_peer, Args) of
+ {ok, {TPid, #diameter_caps{}} = T} when is_pid(TPid) ->
+ T;
+ {{TPid, #diameter_caps{}} = T, ModS} when is_pid(TPid), M ->
mod_state(Alias, ModS),
- {TPid, Caps, App};
+ T;
{false = No, ModS} when M ->
mod_state(Alias, ModS),
No;
@@ -2879,15 +1358,17 @@ pick_peer(Local,
No;
false = No ->
No;
- {{TPid, #diameter_caps{} = Caps}, S} when is_pid(TPid) ->
- {TPid, Caps, App}; %% Accept returned state in the immutable
+ {{TPid, #diameter_caps{}} = T, S} when is_pid(TPid) ->
+ T; %% Accept returned state in the immutable
{false = No, S} -> %% case as long it isn't changed.
No;
T ->
- diameter_lib:error_report({invalid, T, App}, MFA)
+ diameter_lib:error_report({invalid, T, App},
+ {App, pick_peer, Args})
catch
E: Reason ->
- diameter_lib:error_report({failure, {E, Reason, ?STACK}}, MFA)
+ diameter_lib:error_report({failure, {E, Reason, ?STACK}},
+ {App, pick_peer, Args})
end.
%% peers/4
@@ -3258,22 +1739,7 @@ mk_app(#diameter_app{} = A) ->
%% One entry for each outgoing request whose answer is outstanding.
info_pending(#state{} = S) ->
- MatchSpec = [{{'$1',
- #request{caller = '$2',
- handler = '$3',
- transport = '$4',
- _ = '_'},
- '_'},
- [?ORCOND([{'==', T, '$2'} || T <- transports(S)])],
- [{{'$1', [{{caller, '$2'}},
- {{handler, '$3'}},
- {{transport, '$4'}}]}}]}],
-
- try
- ets:select(?REQUEST_TABLE, MatchSpec)
- catch
- error: badarg -> [] %% service has gone down
- end.
+ diameter_traffic:pending(transports(S)).
%% info_connections/1
%%