aboutsummaryrefslogtreecommitdiffstats
path: root/lib/diameter/src/base/diameter_traffic.erl
diff options
context:
space:
mode:
Diffstat (limited to 'lib/diameter/src/base/diameter_traffic.erl')
-rw-r--r--lib/diameter/src/base/diameter_traffic.erl1634
1 files changed, 1634 insertions, 0 deletions
diff --git a/lib/diameter/src/base/diameter_traffic.erl b/lib/diameter/src/base/diameter_traffic.erl
new file mode 100644
index 0000000000..c8c508fd3b
--- /dev/null
+++ b/lib/diameter/src/base/diameter_traffic.erl
@@ -0,0 +1,1634 @@
+%%
+%% %CopyrightBegin%
+%%
+%% Copyright Ericsson AB 2013. All Rights Reserved.
+%%
+%% The contents of this file are subject to the Erlang Public License,
+%% Version 1.1, (the "License"); you may not use this file except in
+%% compliance with the License. You should have received a copy of the
+%% Erlang Public License along with this software. If not, it can be
+%% retrieved online at http://www.erlang.org/.
+%%
+%% Software distributed under the License is distributed on an "AS IS"
+%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+%% the License for the specific language governing rights and limitations
+%% under the License.
+%%
+%% %CopyrightEnd%
+%%
+
+%%
+%% Implements the handling of incoming and outgoing Diameter messages
+%% except CER/CEA, DWR/DWA and DPR/DPA. That is, the messages that a
+%% diameter client sends of receives.
+%%
+
+-module(diameter_traffic).
+
+%% towards diameter
+-export([send_request/4]).
+
+%% towards diameter_watchdog
+-export([receive_message/4]).
+
+%% towards diameter_service
+-export([make_recvdata/1,
+ peer_up/1,
+ peer_down/1,
+ failover/1,
+ pending/1]).
+
+%% Other callbacks.
+-export([send/1]). %% send from remote node
+
+-include_lib("diameter/include/diameter.hrl").
+-include("diameter_internal.hrl").
+
+-define(RELAY, ?DIAMETER_DICT_RELAY).
+-define(BASE, ?DIAMETER_DICT_COMMON). %% Note: the RFC 3588 dictionary
+
+-define(DEFAULT_TIMEOUT, 5000). %% for outgoing requests
+
+%% Table containing outgoing requests for which a reply has yet to be
+%% received.
+-define(REQUEST_TABLE, diameter_request).
+
+%% Workaround for dialyzer's lack of understanding of match specs.
+-type match(T)
+ :: T | '_' | '$1' | '$2' | '$3' | '$4'.
+
+%% Record diameter:call/4 options are parsed into.
+-record(options,
+ {filter = none :: diameter:peer_filter(),
+ extra = [] :: list(),
+ timeout = ?DEFAULT_TIMEOUT :: 0..16#FFFFFFFF,
+ detach = false :: boolean()}).
+
+%% Term passed back to receive_message/4 with every incoming message.
+-record(recvdata,
+ {peerT :: ets:tid(),
+ service_name :: diameter:service_name(),
+ apps :: [#diameter_app{}],
+ sequence :: diameter:sequence()}).
+
+%% Record stored in diameter_request for each outgoing request.
+-record(request,
+ {ref :: match(reference()), %% used to receive answer
+ caller :: match(pid()), %% calling process
+ handler :: match(pid()), %% request process
+ transport :: match(pid()), %% peer process
+ caps :: match(#diameter_caps{}), %% of connection
+ packet :: match(#diameter_packet{})}). %% of request
+
+%% ---------------------------------------------------------------------------
+%% # make_recvdata/1
+%% ---------------------------------------------------------------------------
+
+make_recvdata([SvcName, PeerT, Apps, Mask | _]) ->
+ #recvdata{service_name = SvcName,
+ peerT = PeerT,
+ apps = Apps,
+ sequence = Mask}.
+%% Take a list so that the caller (diameter_service) can be upgraded
+%% first if new members are added. Note that receive_message/4 might
+%% still get an old term from any watchdog started in old code.
+
+%% ---------------------------------------------------------------------------
+%% peer_up/1
+%% ---------------------------------------------------------------------------
+
+%% Insert an element that is used to detect whether or not there has
+%% been a failover when inserting an outgoing request.
+peer_up(TPid) ->
+ ets:insert(?REQUEST_TABLE, {TPid}).
+
+%% ---------------------------------------------------------------------------
+%% peer_down/1
+%% ---------------------------------------------------------------------------
+
+peer_down(TPid) ->
+ ets:delete(?REQUEST_TABLE, TPid),
+ failover(TPid).
+
+%% ---------------------------------------------------------------------------
+%% pending/1
+%% ---------------------------------------------------------------------------
+
+pending(TPids) ->
+ MatchSpec = [{{'$1',
+ #request{caller = '$2',
+ handler = '$3',
+ transport = '$4',
+ _ = '_'},
+ '_'},
+ [?ORCOND([{'==', T, '$4'} || T <- TPids])],
+ [{{'$1', [{{caller, '$2'}},
+ {{handler, '$3'}},
+ {{transport, '$4'}}]}}]}],
+
+ try
+ ets:select(?REQUEST_TABLE, MatchSpec)
+ catch
+ error: badarg -> [] %% service has gone down
+ end.
+
+%% ---------------------------------------------------------------------------
+%% # receive_message/4
+%%
+%% Handle an incoming Diameter message.
+%% ---------------------------------------------------------------------------
+
+%% Handle an incoming Diameter message in the watchdog process. This
+%% used to come through the service process but this avoids that
+%% becoming a bottleneck.
+
+receive_message(TPid, Pkt, Dict0, RecvData)
+ when is_pid(TPid) ->
+ #diameter_packet{header = #diameter_header{is_request = R}} = Pkt,
+ recv(R,
+ (not R) andalso lookup_request(Pkt, TPid),
+ TPid,
+ Pkt,
+ Dict0,
+ RecvData).
+
+%% Incoming request ...
+recv(true, false, TPid, Pkt, Dict0, RecvData) ->
+ try
+ spawn(fun() -> recv_request(TPid, Pkt, Dict0, RecvData) end)
+ catch
+ error: system_limit = E -> %% discard
+ ?LOG({error, E}, now())
+ end;
+
+%% ... answer to known request ...
+recv(false, #request{ref = Ref, handler = Pid} = Req, _, Pkt, Dict0, _) ->
+ Pid ! {answer, Ref, Req, Dict0, Pkt};
+%% Note that failover could have happened prior to this message being
+%% received and triggering failback. That is, both a failover message
+%% and answer may be on their way to the handler process. In the worst
+%% case the request process gets notification of the failover and
+%% sends to the alternate peer before an answer arrives, so it's
+%% always the case that we can receive more than one answer after
+%% failover. The first answer received by the request process wins,
+%% any others are discarded.
+
+%% ... or not.
+recv(false, false, _, _, _, _) ->
+ ok.
+
+%% ---------------------------------------------------------------------------
+%% recv_request/4
+%% ---------------------------------------------------------------------------
+
+recv_request(TPid,
+ #diameter_packet{header = #diameter_header{application_id = Id}}
+ = Pkt,
+ Dict0,
+ #recvdata{peerT = PeerT, apps = Apps}
+ = RecvData) ->
+ recv_request(diameter_service:find_incoming_app(PeerT, TPid, Id, Apps),
+ TPid,
+ Pkt,
+ Dict0,
+ RecvData).
+
+%% recv_request/5
+
+recv_request({#diameter_app{id = Id, dictionary = Dict} = App, Caps},
+ TPid,
+ Pkt,
+ Dict0,
+ RecvData) ->
+ recv_R(App,
+ TPid,
+ Caps,
+ Dict0,
+ RecvData,
+ diameter_codec:decode(Id, Dict, Pkt));
+%% Note that the decode is different depending on whether or not Id is
+%% ?APP_ID_RELAY.
+
+%% DIAMETER_APPLICATION_UNSUPPORTED 3007
+%% A request was sent for an application that is not supported.
+
+recv_request(#diameter_caps{} = Caps, TPid, Pkt, Dict0, _) ->
+ As = collect_avps(Pkt),
+ protocol_error(3007, TPid, Caps, Dict0, Pkt#diameter_packet{avps = As});
+
+recv_request(false, _, _, _, _) -> %% transport has gone down
+ ok.
+
+collect_avps(Pkt) ->
+ case diameter_codec:collect_avps(Pkt) of
+ {_Bs, As} ->
+ As;
+ As ->
+ As
+ end.
+
+%% recv_R/6
+
+%% Wrong number of bits somewhere in the message: reply.
+%%
+%% DIAMETER_INVALID_AVP_BITS 3009
+%% A request was received that included an AVP whose flag bits are
+%% set to an unrecognized value, or that is inconsistent with the
+%% AVP's definition.
+%%
+recv_R(_App,
+ TPid,
+ Caps,
+ Dict0,
+ _RecvData,
+ #diameter_packet{errors = [Bs | _]} = Pkt)
+ when is_bitstring(Bs) ->
+ protocol_error(3009, TPid, Caps, Dict0, Pkt);
+
+%% Either we support this application but don't recognize the command
+%% or we're a relay and the command isn't proxiable.
+%%
+%% DIAMETER_COMMAND_UNSUPPORTED 3001
+%% The Request contained a Command-Code that the receiver did not
+%% recognize or support. This MUST be used when a Diameter node
+%% receives an experimental command that it does not understand.
+%%
+recv_R(#diameter_app{id = Id},
+ TPid,
+ Caps,
+ Dict0,
+ _RecvData,
+ #diameter_packet{header = #diameter_header{is_proxiable = P},
+ msg = M}
+ = Pkt)
+ when ?APP_ID_RELAY /= Id, undefined == M;
+ ?APP_ID_RELAY == Id, not P ->
+ protocol_error(3001, TPid, Caps, Dict0, Pkt);
+
+%% Error bit was set on a request.
+%%
+%% DIAMETER_INVALID_HDR_BITS 3008
+%% A request was received whose bits in the Diameter header were
+%% either set to an invalid combination, or to a value that is
+%% inconsistent with the command code's definition.
+%%
+recv_R(_App,
+ TPid,
+ Caps,
+ Dict0,
+ _RecvData,
+ #diameter_packet{header = #diameter_header{is_error = true}}
+ = Pkt) ->
+ protocol_error(3008, TPid, Caps, Dict0, Pkt);
+
+%% A message in a locally supported application or a proxiable message
+%% in the relay application. Don't distinguish between the two since
+%% each application has its own callback config. That is, the user can
+%% easily distinguish between the two cases.
+recv_R(App, TPid, Caps, Dict0, RecvData, Pkt) ->
+ request_cb(App, TPid, Caps, Dict0, RecvData, examine(Pkt)).
+
+%% Note that there may still be errors but these aren't protocol
+%% (3xxx) errors that lead to an answer-message.
+
+request_cb(App,
+ TPid,
+ Caps,
+ Dict0,
+ #recvdata{service_name = SvcName}
+ = RecvData,
+ Pkt) ->
+ request_cb(cb(App, handle_request, [Pkt, SvcName, {TPid, Caps}]),
+ App,
+ TPid,
+ Caps,
+ Dict0,
+ RecvData,
+ [],
+ Pkt).
+
+%% examine/1
+%%
+%% Look for errors in a decoded message. Length errors result in
+%% decode failure in diameter_codec.
+
+examine(#diameter_packet{header = #diameter_header{version
+ = ?DIAMETER_VERSION}}
+ = Pkt) ->
+ Pkt;
+
+%% DIAMETER_UNSUPPORTED_VERSION 5011
+%% This error is returned when a request was received, whose version
+%% number is unsupported.
+
+examine(#diameter_packet{errors = Es} = Pkt) ->
+ Pkt#diameter_packet{errors = [5011 | Es]}.
+%% It's odd/unfortunate that this isn't a protocol error.
+
+%% request_cb/8
+
+%% A reply may be an answer-message, constructed either here or by
+%% the handle_request callback. The header from the incoming request
+%% is passed into the encode so that it can retrieve the relevant
+%% command code in this case. It will also then ignore Dict and use
+%% the base encoder.
+request_cb({reply, Ans},
+ #diameter_app{dictionary = Dict},
+ TPid,
+ _Caps,
+ Dict0,
+ _RecvData,
+ Fs,
+ Pkt) ->
+ reply(Ans, dict(Dict, Dict0, Ans), TPid, Fs, Pkt);
+
+%% An 3xxx result code, for which the E-bit is set in the header.
+request_cb({protocol_error, RC},
+ _App,
+ TPid,
+ Caps,
+ Dict0,
+ _RecvData,
+ Fs,
+ Pkt)
+ when 3000 =< RC, RC < 4000 ->
+ protocol_error(RC, TPid, Caps, Dict0, Fs, Pkt);
+
+%% RFC 3588 says we must reply 3001 to anything unrecognized or
+%% unsupported. 'noreply' is undocumented (and inappropriately named)
+%% backwards compatibility for this, protocol_error the documented
+%% alternative.
+request_cb(noreply,
+ _App,
+ TPid,
+ Caps,
+ Dict0,
+ _RecvData,
+ Fs,
+ Pkt) ->
+ protocol_error(3001, TPid, Caps, Dict0, Fs, Pkt);
+
+%% Relay a request to another peer. This is equivalent to doing an
+%% explicit call/4 with the message in question except that (1) a loop
+%% will be detected by examining Route-Record AVP's, (3) a
+%% Route-Record AVP will be added to the outgoing request and (3) the
+%% End-to-End Identifier will default to that in the
+%% #diameter_header{} without the need for an end_to_end_identifier
+%% option.
+%%
+%% relay and proxy are similar in that they require the same handling
+%% with respect to Route-Record and End-to-End identifier. The
+%% difference is that a proxy advertises specific applications, while
+%% a relay advertises the relay application. If a callback doesn't
+%% want to distinguish between the cases in the callback return value
+%% then 'resend' is a neutral alternative.
+%%
+request_cb({A, Opts},
+ #diameter_app{id = Id}
+ = App,
+ TPid,
+ Caps,
+ Dict0,
+ RecvData,
+ Fs,
+ Pkt)
+ when A == relay, Id == ?APP_ID_RELAY;
+ A == proxy, Id /= ?APP_ID_RELAY;
+ A == resend ->
+ resend(Opts, App, TPid, Caps, Dict0, RecvData, Fs, Pkt);
+
+request_cb(discard, _, _, _, _, _, _, _) ->
+ ok;
+
+request_cb({eval_packet, RC, F}, App, TPid, Caps, Dict0, RecvData, Fs, Pkt) ->
+ request_cb(RC, App, TPid, Caps, Dict0, RecvData, [F|Fs], Pkt);
+
+request_cb({eval, RC, F}, App, TPid, Caps, Dict0, RecvData, Fs, Pkt) ->
+ request_cb(RC, App, TPid, Caps, Dict0, RecvData, Fs, Pkt),
+ diameter_lib:eval(F).
+
+%% dict/3
+
+%% An incoming answer, not yet decoded.
+dict(Dict, Dict0, #diameter_packet{header
+ = #diameter_header{is_request = false,
+ is_error = E},
+ msg = undefined}) ->
+ if E -> Dict0; true -> Dict end;
+
+dict(Dict, Dict0, [Msg]) ->
+ dict(Dict, Dict0, Msg);
+
+dict(Dict, Dict0, #diameter_packet{msg = Msg}) ->
+ dict(Dict, Dict0, Msg);
+
+dict(_Dict, Dict0, ['answer-message' | _]) ->
+ Dict0;
+
+dict(Dict, Dict0, Rec) ->
+ try
+ 'answer-message' = Dict0:rec2msg(element(1,Rec)),
+ Dict0
+ catch
+ error:_ -> Dict
+ end.
+
+%% protocol_error/6
+
+protocol_error(RC, TPid, Caps, Dict0, Fs, Pkt) ->
+ #diameter_caps{origin_host = {OH,_},
+ origin_realm = {OR,_}}
+ = Caps,
+ #diameter_packet{avps = Avps, errors = Es}
+ = Pkt,
+
+ ?LOG({error, RC}, Pkt),
+ reply(answer_message({OH, OR, RC}, Dict0, Avps),
+ Dict0,
+ TPid,
+ Fs,
+ Pkt#diameter_packet{errors = [RC | Es]}).
+%% Note that reply/5 may set the result code once more. It's set in
+%% answer_message/3 in case reply/5 doesn't.
+
+%% protocol_error/5
+
+protocol_error(RC, TPid, Caps, Dict0, Pkt) ->
+ protocol_error(RC, TPid, Caps, Dict0, [], Pkt).
+
+%% resend/7
+%%
+%% Resend a message as a relay or proxy agent.
+
+resend(Opts,
+ #diameter_app{}
+ = App,
+ TPid,
+ #diameter_caps{origin_host = {OH,_}}
+ = Caps,
+ Dict0,
+ RecvData,
+ Fs,
+ #diameter_packet{avps = Avps}
+ = Pkt) ->
+ {Code, _Flags, Vid} = Dict0:avp_header('Route-Record'),
+ resend(is_loop(Code, Vid, OH, Dict0, Avps),
+ Opts,
+ App,
+ TPid,
+ Caps,
+ Dict0,
+ RecvData,
+ Fs,
+ Pkt).
+
+%% DIAMETER_LOOP_DETECTED 3005
+%% An agent detected a loop while trying to get the message to the
+%% intended recipient. The message MAY be sent to an alternate peer,
+%% if one is available, but the peer reporting the error has
+%% identified a configuration problem.
+
+resend(true, _Opts, _App, TPid, Caps, Dict0, _RecvData, Fs, Pkt) ->
+ protocol_error(3005, TPid, Caps, Dict0, Fs, Pkt);
+
+%% 6.1.8. Relaying and Proxying Requests
+%%
+%% A relay or proxy agent MUST append a Route-Record AVP to all requests
+%% forwarded. The AVP contains the identity of the peer the request was
+%% received from.
+
+resend(false,
+ Opts,
+ App,
+ TPid,
+ #diameter_caps{origin_host = {_,OH}}
+ = Caps,
+ Dict0,
+ #recvdata{service_name = SvcName,
+ sequence = Mask},
+ Fs,
+ #diameter_packet{header = Hdr0,
+ avps = Avps}
+ = Pkt) ->
+ Route = #diameter_avp{data = {Dict0, 'Route-Record', OH}},
+ Seq = diameter_session:sequence(Mask),
+ Hdr = Hdr0#diameter_header{hop_by_hop_id = Seq},
+ Msg = [Hdr, Route | Avps],
+ resend(send_request(SvcName, App, Msg, Opts), TPid, Caps, Dict0, Fs, Pkt).
+%% The incoming request is relayed with the addition of a
+%% Route-Record. Note the requirement on the return from call/4 below,
+%% which places a requirement on the value returned by the
+%% handle_answer callback of the application module in question.
+%%
+%% Note that there's nothing stopping the request from being relayed
+%% back to the sender. A pick_peer callback may want to avoid this but
+%% a smart peer might recognize the potential loop and choose another
+%% route. A less smart one will probably just relay the request back
+%% again and force us to detect the loop. A pick_peer that wants to
+%% avoid this can specify filter to avoid the possibility.
+%% Eg. {neg, {host, OH} where #diameter_caps{origin_host = {OH, _}}.
+%%
+%% RFC 6.3 says that a relay agent does not modify Origin-Host but
+%% says nothing about a proxy. Assume it should behave the same way.
+
+%% resend/6
+%%
+%% Relay a reply to a relayed request.
+
+%% Answer from the peer: reset the hop by hop identifier and send.
+resend(#diameter_packet{bin = B}
+ = Pkt,
+ TPid,
+ _Caps,
+ _Dict0,
+ Fs,
+ #diameter_packet{header = #diameter_header{hop_by_hop_id = Id},
+ transport_data = TD}) ->
+ P = Pkt#diameter_packet{bin = diameter_codec:hop_by_hop_id(Id, B),
+ transport_data = TD},
+ eval_packet(P, Fs),
+ send(TPid, P);
+%% TODO: counters
+
+%% Or not: DIAMETER_UNABLE_TO_DELIVER.
+resend(_, TPid, Caps, Dict0, Fs, Pkt) ->
+ protocol_error(3002, TPid, Caps, Dict0, Fs, Pkt).
+
+%% is_loop/5
+%%
+%% Is there a Route-Record AVP with our Origin-Host?
+
+is_loop(Code,
+ Vid,
+ Bin,
+ _Dict0,
+ [#diameter_avp{code = Code, vendor_id = Vid, data = Bin} | _]) ->
+ true;
+
+is_loop(_, _, _, _, []) ->
+ false;
+
+is_loop(Code, Vid, OH, Dict0, [_ | Avps])
+ when is_binary(OH) ->
+ is_loop(Code, Vid, OH, Dict0, Avps);
+
+is_loop(Code, Vid, OH, Dict0, Avps) ->
+ is_loop(Code, Vid, Dict0:avp(encode, OH, 'Route-Record'), Dict0, Avps).
+
+%% reply/5
+%%
+%% Send a locally originating reply.
+
+%% Skip the setting of Result-Code and Failed-AVP's below. This is
+%% currently undocumented.
+reply([Msg], Dict, TPid, Fs, Pkt)
+ when is_list(Msg);
+ is_tuple(Msg) ->
+ reply(Msg, Dict, TPid, Fs, Pkt#diameter_packet{errors = []});
+
+%% No errors or a diameter_header/avp list.
+reply(Msg, Dict, TPid, Fs, #diameter_packet{errors = Es} = ReqPkt)
+ when [] == Es;
+ is_record(hd(Msg), diameter_header) ->
+ Pkt = encode(Dict, make_answer_packet(Msg, ReqPkt), Fs),
+ incr(send, Pkt, Dict, TPid), %% count result codes in sent answers
+ send(TPid, Pkt);
+
+%% Or not: set Result-Code and Failed-AVP AVP's.
+reply(Msg, Dict, TPid, Fs, #diameter_packet{errors = [H|_] = Es} = Pkt) ->
+ reply(rc(Msg, rc(H), [A || {_,A} <- Es], Dict),
+ Dict,
+ TPid,
+ Fs,
+ Pkt#diameter_packet{errors = []}).
+
+eval_packet(Pkt, Fs) ->
+ lists:foreach(fun(F) -> diameter_lib:eval([F,Pkt]) end, Fs).
+
+%% make_answer_packet/2
+
+%% A reply message clears the R and T flags and retains the P flag.
+%% The E flag will be set at encode. 6.2 of 3588 requires the same P
+%% flag on an answer as on the request. A #diameter_packet{} returned
+%% from a handle_request callback can circumvent this by setting its
+%% own header values.
+make_answer_packet(#diameter_packet{header = Hdr,
+ msg = Msg,
+ transport_data = TD},
+ #diameter_packet{header = ReqHdr}) ->
+ Hdr0 = ReqHdr#diameter_header{version = ?DIAMETER_VERSION,
+ is_request = false,
+ is_error = undefined,
+ is_retransmitted = false},
+ #diameter_packet{header = fold_record(Hdr0, Hdr),
+ msg = Msg,
+ transport_data = TD};
+
+%% Binaries and header/avp lists are sent as-is.
+make_answer_packet(Bin, #diameter_packet{transport_data = TD})
+ when is_binary(Bin) ->
+ #diameter_packet{bin = Bin,
+ transport_data = TD};
+make_answer_packet([#diameter_header{} | _] = Msg,
+ #diameter_packet{transport_data = TD}) ->
+ #diameter_packet{msg = Msg,
+ transport_data = TD};
+
+%% Otherwise, preserve transport_data.
+make_answer_packet(Msg, #diameter_packet{transport_data = TD} = Pkt) ->
+ make_answer_packet(#diameter_packet{msg = Msg, transport_data = TD}, Pkt).
+
+%% rc/1
+
+rc({RC, _}) ->
+ RC;
+rc(RC) ->
+ RC.
+
+%% rc/4
+
+rc(#diameter_packet{msg = Rec} = Pkt, RC, Failed, DictT) ->
+ Pkt#diameter_packet{msg = rc(Rec, RC, Failed, DictT)};
+
+rc(Rec, RC, Failed, DictT)
+ when is_integer(RC) ->
+ set(Rec,
+ lists:append([rc(Rec, {'Result-Code', RC}, DictT),
+ failed_avp(Rec, Failed, DictT)]),
+ DictT).
+
+%% Reply as name and tuple list ...
+set([_|_] = Ans, Avps, _) ->
+ Ans ++ Avps; %% Values nearer tail take precedence.
+
+%% ... or record.
+set(Rec, Avps, Dict) ->
+ Dict:'#set-'(Avps, Rec).
+
+%% rc/3
+%%
+%% Turn the result code into a list if its optional and only set it if
+%% the arity is 1 or {0,1}. In other cases (which probably shouldn't
+%% exist in practise) we can't know what's appropriate.
+
+rc([MsgName | _], {'Result-Code' = K, RC} = T, Dict) ->
+ case Dict:avp_arity(MsgName, 'Result-Code') of
+ 1 -> [T];
+ {0,1} -> [{K, [RC]}];
+ _ -> []
+ end;
+
+rc(Rec, T, Dict) ->
+ rc([Dict:rec2msg(element(1, Rec))], T, Dict).
+
+%% failed_avp/3
+
+failed_avp(_, [] = No, _) ->
+ No;
+
+failed_avp(Rec, Failed, Dict) ->
+ [fa(Rec, [{'AVP', Failed}], Dict)].
+
+%% Reply as name and tuple list ...
+fa([MsgName | Values], FailedAvp, Dict) ->
+ R = Dict:msg2rec(MsgName),
+ try
+ Dict:'#info-'(R, {index, 'Failed-AVP'}),
+ {'Failed-AVP', [FailedAvp]}
+ catch
+ error: _ ->
+ Avps = proplists:get_value('AVP', Values, []),
+ A = #diameter_avp{name = 'Failed-AVP',
+ value = FailedAvp},
+ {'AVP', [A|Avps]}
+ end;
+
+%% ... or record.
+fa(Rec, FailedAvp, Dict) ->
+ try
+ {'Failed-AVP', [FailedAvp]}
+ catch
+ error: _ ->
+ Avps = Dict:'get-'('AVP', Rec),
+ A = #diameter_avp{name = 'Failed-AVP',
+ value = FailedAvp},
+ {'AVP', [A|Avps]}
+ end.
+
+%% 3. Diameter Header
+%%
+%% E(rror) - If set, the message contains a protocol error,
+%% and the message will not conform to the ABNF
+%% described for this command. Messages with the 'E'
+%% bit set are commonly referred to as error
+%% messages. This bit MUST NOT be set in request
+%% messages. See Section 7.2.
+
+%% 3.2. Command Code ABNF specification
+%%
+%% e-bit = ", ERR"
+%% ; If present, the 'E' bit in the Command
+%% ; Flags is set, indicating that the answer
+%% ; message contains a Result-Code AVP in
+%% ; the "protocol error" class.
+
+%% 7.1.3. Protocol Errors
+%%
+%% Errors that fall within the Protocol Error category SHOULD be treated
+%% on a per-hop basis, and Diameter proxies MAY attempt to correct the
+%% error, if it is possible. Note that these and only these errors MUST
+%% only be used in answer messages whose 'E' bit is set.
+
+%% Thus, only construct answers to protocol errors. Other errors
+%% require an message-specific answer and must be handled by the
+%% application.
+
+%% 6.2. Diameter Answer Processing
+%%
+%% When a request is locally processed, the following procedures MUST be
+%% applied to create the associated answer, in addition to any
+%% additional procedures that MAY be discussed in the Diameter
+%% application defining the command:
+%%
+%% - The same Hop-by-Hop identifier in the request is used in the
+%% answer.
+%%
+%% - The local host's identity is encoded in the Origin-Host AVP.
+%%
+%% - The Destination-Host and Destination-Realm AVPs MUST NOT be
+%% present in the answer message.
+%%
+%% - The Result-Code AVP is added with its value indicating success or
+%% failure.
+%%
+%% - If the Session-Id is present in the request, it MUST be included
+%% in the answer.
+%%
+%% - Any Proxy-Info AVPs in the request MUST be added to the answer
+%% message, in the same order they were present in the request.
+%%
+%% - The 'P' bit is set to the same value as the one in the request.
+%%
+%% - The same End-to-End identifier in the request is used in the
+%% answer.
+%%
+%% Note that the error messages (see Section 7.3) are also subjected to
+%% the above processing rules.
+
+%% 7.3. Error-Message AVP
+%%
+%% The Error-Message AVP (AVP Code 281) is of type UTF8String. It MAY
+%% accompany a Result-Code AVP as a human readable error message. The
+%% Error-Message AVP is not intended to be useful in real-time, and
+%% SHOULD NOT be expected to be parsed by network entities.
+
+%% answer_message/3
+
+answer_message({OH, OR, RC}, Dict0, Avps) ->
+ {Code, _, Vid} = Dict0:avp_header('Session-Id'),
+ ['answer-message', {'Origin-Host', OH},
+ {'Origin-Realm', OR},
+ {'Result-Code', RC}
+ | session_id(Code, Vid, Dict0, Avps)].
+
+session_id(Code, Vid, Dict0, Avps)
+ when is_list(Avps) ->
+ try
+ {value, #diameter_avp{data = D}} = find_avp(Code, Vid, Avps),
+ [{'Session-Id', [Dict0:avp(decode, D, 'Session-Id')]}]
+ catch
+ error: _ ->
+ []
+ end.
+
+%% find_avp/3
+
+find_avp(Code, Vid, Avps)
+ when is_integer(Code), (undefined == Vid orelse is_integer(Vid)) ->
+ find(fun(A) -> is_avp(Code, Vid, A) end, Avps).
+
+%% The final argument here could be a list of AVP's, depending on the case,
+%% but we're only searching at the top level.
+is_avp(Code, Vid, #diameter_avp{code = Code, vendor_id = Vid}) ->
+ true;
+is_avp(_, _, _) ->
+ false.
+
+find(_, []) ->
+ false;
+find(Pred, [H|T]) ->
+ case Pred(H) of
+ true ->
+ {value, H};
+ false ->
+ find(Pred, T)
+ end.
+
+%% 7. Error Handling
+%%
+%% There are certain Result-Code AVP application errors that require
+%% additional AVPs to be present in the answer. In these cases, the
+%% Diameter node that sets the Result-Code AVP to indicate the error
+%% MUST add the AVPs. Examples are:
+%%
+%% - An unrecognized AVP is received with the 'M' bit (Mandatory bit)
+%% set, causes an answer to be sent with the Result-Code AVP set to
+%% DIAMETER_AVP_UNSUPPORTED, and the Failed-AVP AVP containing the
+%% offending AVP.
+%%
+%% - An AVP that is received with an unrecognized value causes an
+%% answer to be returned with the Result-Code AVP set to
+%% DIAMETER_INVALID_AVP_VALUE, with the Failed-AVP AVP containing the
+%% AVP causing the error.
+%%
+%% - A command is received with an AVP that is omitted, yet is
+%% mandatory according to the command's ABNF. The receiver issues an
+%% answer with the Result-Code set to DIAMETER_MISSING_AVP, and
+%% creates an AVP with the AVP Code and other fields set as expected
+%% in the missing AVP. The created AVP is then added to the Failed-
+%% AVP AVP.
+%%
+%% The Result-Code AVP describes the error that the Diameter node
+%% encountered in its processing. In case there are multiple errors,
+%% the Diameter node MUST report only the first error it encountered
+%% (detected possibly in some implementation dependent order). The
+%% specific errors that can be described by this AVP are described in
+%% the following section.
+
+%% 7.5. Failed-AVP AVP
+%%
+%% The Failed-AVP AVP (AVP Code 279) is of type Grouped and provides
+%% debugging information in cases where a request is rejected or not
+%% fully processed due to erroneous information in a specific AVP. The
+%% value of the Result-Code AVP will provide information on the reason
+%% for the Failed-AVP AVP.
+%%
+%% The possible reasons for this AVP are the presence of an improperly
+%% constructed AVP, an unsupported or unrecognized AVP, an invalid AVP
+%% value, the omission of a required AVP, the presence of an explicitly
+%% excluded AVP (see tables in Section 10), or the presence of two or
+%% more occurrences of an AVP which is restricted to 0, 1, or 0-1
+%% occurrences.
+%%
+%% A Diameter message MAY contain one Failed-AVP AVP, containing the
+%% entire AVP that could not be processed successfully. If the failure
+%% reason is omission of a required AVP, an AVP with the missing AVP
+%% code, the missing vendor id, and a zero filled payload of the minimum
+%% required length for the omitted AVP will be added.
+
+%% incr/4
+%%
+%% Increment a stats counter for an incoming or outgoing message.
+
+%% Outgoing message as binary: don't count. (Sending binaries is only
+%% partially supported.)
+incr(_, #diameter_packet{msg = undefined}, _, _) ->
+ ok;
+
+incr(recv = D, #diameter_packet{header = H, errors = [_|_]}, _, TPid) ->
+ incr(TPid, {diameter_codec:msg_id(H), D, error});
+
+incr(Dir, Pkt, Dict, TPid) ->
+ #diameter_packet{header = #diameter_header{is_error = E}
+ = Hdr,
+ msg = Rec}
+ = Pkt,
+
+ RC = int(get_avp_value(Dict, 'Result-Code', Rec)),
+ PE = is_protocol_error(RC),
+
+ %% Check that the E bit is set only for 3xxx result codes.
+ (not (E orelse PE))
+ orelse (E andalso PE)
+ orelse x({invalid_error_bit, RC}, answer, [Dir, Pkt]),
+
+ irc(TPid, Hdr, Dir, rc_counter(Dict, Rec, RC)).
+
+irc(_, _, _, undefined) ->
+ false;
+
+irc(TPid, Hdr, Dir, Ctr) ->
+ incr(TPid, {diameter_codec:msg_id(Hdr), Dir, Ctr}).
+
+%% incr/2
+
+incr(TPid, Counter) ->
+ diameter_stats:incr(Counter, TPid, 1).
+
+%% error_counter/2
+
+%% RFC 3588, 7.6:
+%%
+%% All Diameter answer messages defined in vendor-specific
+%% applications MUST include either one Result-Code AVP or one
+%% Experimental-Result AVP.
+%%
+%% Maintain statistics assuming one or the other, not both, which is
+%% surely the intent of the RFC.
+
+rc_counter(Dict, Rec, undefined) ->
+ rcc(get_avp_value(Dict, 'Experimental-Result', Rec));
+rc_counter(_, _, RC) ->
+ {'Result-Code', RC}.
+
+%% Outgoing answers may be in any of the forms messages can be sent
+%% in. Incoming messages will be records. We're assuming here that the
+%% arity of the result code AVP's is 0 or 1.
+
+rcc([{_,_,N} = T | _])
+ when is_integer(N) ->
+ T;
+rcc({_,_,N} = T)
+ when is_integer(N) ->
+ T;
+rcc(_) ->
+ undefined.
+
+%% Extract the first good looking integer. There's no guarantee
+%% that what we're looking for has arity 1.
+int([N|_])
+ when is_integer(N) ->
+ N;
+int(N)
+ when is_integer(N) ->
+ N;
+int(_) ->
+ undefined.
+
+is_protocol_error(RC) ->
+ 3000 =< RC andalso RC < 4000.
+
+-spec x(any(), atom(), list()) -> no_return().
+
+%% Warn and exit request process on errors in an incoming answer.
+x(Reason, F, A) ->
+ diameter_lib:warning_report(Reason, {?MODULE, F, A}),
+ x(Reason).
+
+x(T) ->
+ exit(T).
+
+%% ---------------------------------------------------------------------------
+%% # send_request/4
+%%
+%% Handle an outgoing Diameter request.
+%% ---------------------------------------------------------------------------
+
+send_request(SvcName, AppOrAlias, Msg, Options)
+ when is_list(Options) ->
+ Rec = make_options(Options),
+ Ref = make_ref(),
+ Caller = {self(), Ref},
+ ReqF = fun() ->
+ exit({Ref, send_R(SvcName, AppOrAlias, Msg, Rec, Caller)})
+ end,
+ try spawn_monitor(ReqF) of
+ {_, MRef} ->
+ recv_A(MRef, Ref, Rec#options.detach, false)
+ catch
+ error: system_limit = E ->
+ {error, E}
+ end.
+%% The R in send_R is because Diameter request are usually given short
+%% names of the form XXR. (eg. CER, DWR, etc.) Similarly, answers have
+%% names of the form XXA.
+
+%% Don't rely on gen_server:call/3 for the timeout handling since it
+%% makes no guarantees about not leaving a reply message in the
+%% mailbox if we catch its exit at timeout. It currently *can* do so,
+%% which is also undocumented.
+
+recv_A(MRef, _, true, true) ->
+ erlang:demonitor(MRef, [flush]),
+ ok;
+
+recv_A(MRef, Ref, Detach, Sent) ->
+ receive
+ Ref -> %% send has been attempted
+ recv_A(MRef, Ref, Detach, true);
+ {'DOWN', MRef, process, _, Reason} ->
+ answer_rc(Reason, Ref, Sent)
+ end.
+
+%% send_R/5 has returned ...
+answer_rc({Ref, Ans}, Ref, _) ->
+ Ans;
+
+%% ... or not. Note that failure/encode are documented return values.
+answer_rc(_, _, Sent) ->
+ {error, choose(Sent, failure, encode)}.
+
+%% send_R/5
+%%
+%% In the process spawned for the outgoing request.
+
+send_R(SvcName, AppOrAlias, Msg, Opts, Caller) ->
+ case pick_peer(SvcName, AppOrAlias, Msg, Opts) of
+ {{_,_,_} = Transport, Mask} ->
+ send_request(Transport, Mask, Msg, Opts, Caller, SvcName);
+ false ->
+ {error, no_connection};
+ {error, _} = No ->
+ No
+ end.
+
+%% make_options/1
+
+make_options(Options) ->
+ lists:foldl(fun mo/2, #options{}, Options).
+
+mo({timeout, T}, Rec)
+ when is_integer(T), 0 =< T ->
+ Rec#options{timeout = T};
+
+mo({filter, F}, #options{filter = none} = Rec) ->
+ Rec#options{filter = F};
+mo({filter, F}, #options{filter = {all, Fs}} = Rec) ->
+ Rec#options{filter = {all, [F | Fs]}};
+mo({filter, F}, #options{filter = F0} = Rec) ->
+ Rec#options{filter = {all, [F0, F]}};
+
+mo({extra, L}, #options{extra = X} = Rec)
+ when is_list(L) ->
+ Rec#options{extra = X ++ L};
+
+mo(detach, Rec) ->
+ Rec#options{detach = true};
+
+mo(T, _) ->
+ ?ERROR({invalid_option, T}).
+
+%% ---------------------------------------------------------------------------
+%% # send_request/6
+%% ---------------------------------------------------------------------------
+
+%% Send an outgoing request in its dedicated process.
+%%
+%% Note that both encode of the outgoing request and of the received
+%% answer happens in this process. It's also this process that replies
+%% to the caller. The service process only handles the state-retaining
+%% callbacks.
+%%
+%% The module field of the #diameter_app{} here includes any extra
+%% arguments passed to diameter:call/4.
+
+send_request({TPid, Caps, App}
+ = Transport,
+ Mask,
+ Msg,
+ Opts,
+ Caller,
+ SvcName) ->
+ Pkt = make_prepare_packet(Mask, Msg),
+
+ send_R(cb(App, prepare_request, [Pkt, SvcName, {TPid, Caps}]),
+ Pkt,
+ Transport,
+ Opts,
+ Caller,
+ SvcName,
+ []).
+
+send_R({send, Msg}, Pkt, Transport, Opts, Caller, SvcName, Fs) ->
+ send_R(make_request_packet(Msg, Pkt),
+ Transport,
+ Opts,
+ Caller,
+ SvcName,
+ Fs);
+
+send_R({discard, Reason} , _, _, _, _, _, _) ->
+ {error, Reason};
+
+send_R(discard, _, _, _, _, _, _) ->
+ {error, discarded};
+
+send_R({eval_packet, RC, F}, Pkt, T, Opts, Caller, SvcName, Fs) ->
+ send_R(RC, Pkt, T, Opts, Caller, SvcName, [F|Fs]);
+
+send_R(E, _, {_, _, App}, _, _, _, _) ->
+ ?ERROR({invalid_return, prepare_request, App, E}).
+
+%% make_prepare_packet/2
+%%
+%% Turn an outgoing request as passed to call/4 into a diameter_packet
+%% record in preparation for a prepare_request callback.
+
+make_prepare_packet(_, Bin)
+ when is_binary(Bin) ->
+ #diameter_packet{header = diameter_codec:decode_header(Bin),
+ bin = Bin};
+
+make_prepare_packet(Mask, #diameter_packet{msg = [#diameter_header{} = Hdr
+ | Avps]}
+ = Pkt) ->
+ Pkt#diameter_packet{msg = [make_prepare_header(Mask, Hdr) | Avps]};
+
+make_prepare_packet(Mask, #diameter_packet{header = Hdr} = Pkt) ->
+ Pkt#diameter_packet{header = make_prepare_header(Mask, Hdr)};
+
+make_prepare_packet(Mask, Msg) ->
+ make_prepare_packet(Mask, #diameter_packet{msg = Msg}).
+
+%% make_prepare_header/2
+
+make_prepare_header(Mask, undefined) ->
+ Seq = diameter_session:sequence(Mask),
+ make_prepare_header(#diameter_header{end_to_end_id = Seq,
+ hop_by_hop_id = Seq});
+
+make_prepare_header(Mask, #diameter_header{end_to_end_id = undefined,
+ hop_by_hop_id = undefined}
+ = H) ->
+ Seq = diameter_session:sequence(Mask),
+ make_prepare_header(H#diameter_header{end_to_end_id = Seq,
+ hop_by_hop_id = Seq});
+
+make_prepare_header(Mask, #diameter_header{end_to_end_id = undefined} = H) ->
+ Seq = diameter_session:sequence(Mask),
+ make_prepare_header(H#diameter_header{end_to_end_id = Seq});
+
+make_prepare_header(Mask, #diameter_header{hop_by_hop_id = undefined} = H) ->
+ Seq = diameter_session:sequence(Mask),
+ make_prepare_header(H#diameter_header{hop_by_hop_id = Seq});
+
+make_prepare_header(_, Hdr) ->
+ make_prepare_header(Hdr).
+
+%% make_prepare_header/1
+
+make_prepare_header(#diameter_header{version = undefined} = Hdr) ->
+ make_prepare_header(Hdr#diameter_header{version = ?DIAMETER_VERSION});
+
+make_prepare_header(#diameter_header{} = Hdr) ->
+ Hdr;
+
+make_prepare_header(T) ->
+ ?ERROR({invalid_header, T}).
+
+%% make_request_packet/2
+%%
+%% Reconstruct a diameter_packet from the return value of
+%% prepare_request or prepare_retransmit callback.
+
+make_request_packet(Bin, _)
+ when is_binary(Bin) ->
+ make_prepare_packet(false, Bin);
+
+make_request_packet(#diameter_packet{msg = [#diameter_header{} | _]}
+ = Pkt,
+ _) ->
+ Pkt;
+
+%% Returning a diameter_packet with no header from a prepare_request
+%% or prepare_retransmit callback retains the header passed into it.
+%% This is primarily so that the end to end and hop by hop identifiers
+%% are retained.
+make_request_packet(#diameter_packet{header = Hdr} = Pkt,
+ #diameter_packet{header = Hdr0}) ->
+ Pkt#diameter_packet{header = fold_record(Hdr0, Hdr)};
+
+make_request_packet(Msg, Pkt) ->
+ Pkt#diameter_packet{msg = Msg}.
+
+%% fold_record/2
+
+fold_record(undefined, R) ->
+ R;
+fold_record(Rec, R) ->
+ diameter_lib:fold_tuple(2, Rec, R).
+
+%% send_R/6
+
+send_R(Pkt0,
+ {TPid, Caps, #diameter_app{dictionary = Dict} = App},
+ Opts,
+ {Pid, Ref},
+ SvcName,
+ Fs) ->
+ Pkt = encode(Dict, Pkt0, Fs),
+
+ #options{timeout = Timeout}
+ = Opts,
+
+ Req = #request{ref = Ref,
+ caller = Pid,
+ handler = self(),
+ transport = TPid,
+ caps = Caps,
+ packet = Pkt0},
+
+ try
+ TRef = send_request(TPid, Pkt, Req, SvcName, Timeout),
+ Pid ! Ref, %% tell caller a send has been attempted
+ handle_answer(SvcName,
+ App,
+ recv_A(Timeout, SvcName, App, Opts, {TRef, Req}))
+ after
+ erase_requests(Pkt)
+ end.
+
+%% recv_A/5
+
+recv_A(Timeout, SvcName, App, Opts, {TRef, #request{ref = Ref} = Req}) ->
+ %% Matching on TRef below ensures we ignore messages that pertain
+ %% to a previous transport prior to failover. The answer message
+ %% includes the #request{} since it's not necessarily Req; that
+ %% is, from the last peer to which we've transmitted.
+ receive
+ {answer = A, Ref, Rq, Dict0, Pkt} -> %% Answer from peer
+ {A, Rq, Dict0, Pkt};
+ {timeout = Reason, TRef, _} -> %% No timely reply
+ {error, Req, Reason};
+ {failover, TRef} -> %% Service says peer has gone down
+ retransmit(pick_peer(SvcName, App, Req, Opts),
+ Req,
+ Opts,
+ SvcName,
+ Timeout)
+ end.
+
+%% handle_answer/3
+
+handle_answer(SvcName, App, {error, Req, Reason}) ->
+ handle_error(App, Req, Reason, SvcName);
+
+handle_answer(SvcName,
+ #diameter_app{dictionary = Dict}
+ = App,
+ {answer, Req, Dict0, Pkt}) ->
+ Mod = dict(Dict, Dict0, Pkt),
+ answer(examine(diameter_codec:decode(Mod, Pkt)),
+ SvcName,
+ Mod,
+ App,
+ Req).
+
+%% We don't really need to do a full decode if we're a relay and will
+%% just resend with a new hop by hop identifier, but might a proxy
+%% want to examine the answer?
+
+answer(Pkt, SvcName, Dict, App, #request{transport = TPid} = Req) ->
+ try
+ incr(recv, Pkt, Dict, TPid)
+ of
+ _ -> answer(Pkt, SvcName, App, Req)
+ catch
+ exit: {invalid_error_bit, _} = E ->
+ answer(Pkt#diameter_packet{errors = [E]}, SvcName, App, Req)
+ end.
+
+answer(Pkt,
+ SvcName,
+ #diameter_app{module = ModX,
+ options = [{answer_errors, AE} | _]},
+ Req) ->
+ a(Pkt, SvcName, ModX, AE, Req).
+
+a(#diameter_packet{errors = Es}
+ = Pkt,
+ SvcName,
+ ModX,
+ AE,
+ #request{transport = TPid,
+ caps = Caps,
+ packet = P})
+ when [] == Es;
+ callback == AE ->
+ cb(ModX, handle_answer, [Pkt, msg(P), SvcName, {TPid, Caps}]);
+
+a(Pkt, SvcName, _, report, Req) ->
+ x(errors, handle_answer, [SvcName, Req, Pkt]);
+
+a(Pkt, SvcName, _, discard, Req) ->
+ x({errors, handle_answer, [SvcName, Req, Pkt]}).
+
+%% Note that we don't check that the application id in the answer's
+%% header is what we expect. (TODO: Does the rfc says anything about
+%% this?)
+
+%% Note that failover starts a new timer and that expiry of an old
+%% timer value is ignored. This means that an answer could be accepted
+%% from a peer after timeout in the case of failover.
+
+retransmit({{_,_,App} = Transport, _Mask}, Req, Opts, SvcName, Timeout) ->
+ try retransmit(Transport, Req, SvcName, Timeout) of
+ T -> recv_A(Timeout, SvcName, App, Opts, T)
+ catch
+ ?FAILURE(Reason) -> {error, Req, Reason}
+ end;
+
+retransmit(_, Req, _, _, _) -> %% no alternate peer
+ {error, Req, failover}.
+
+%% pick_peer/4
+
+%% Retransmission after failover: call-specific arguments have already
+%% been appended in App.
+pick_peer(SvcName,
+ App,
+ #request{packet = #diameter_packet{msg = Msg}},
+ Opts) ->
+ pick_peer(SvcName, App, Msg, Opts#options{extra = []});
+
+pick_peer(_, _, undefined, _) ->
+ false;
+
+pick_peer(SvcName,
+ AppOrAlias,
+ Msg,
+ #options{filter = Filter, extra = Xtra}) ->
+ diameter_service:pick_peer(SvcName,
+ AppOrAlias,
+ {fun(D) -> get_destination(D, Msg) end,
+ Filter,
+ Xtra}).
+
+%% handle_error/4
+
+handle_error(App,
+ #request{packet = Pkt,
+ transport = TPid,
+ caps = Caps},
+ Reason,
+ SvcName) ->
+ cb(App, handle_error, [Reason, msg(Pkt), SvcName, {TPid, Caps}]).
+
+msg(#diameter_packet{msg = undefined, bin = Bin}) ->
+ Bin;
+msg(#diameter_packet{msg = Msg}) ->
+ Msg.
+
+%% encode/3
+
+encode(Dict, Pkt, Fs) ->
+ P = encode(Dict, Pkt),
+ eval_packet(P, Fs),
+ P.
+
+%% encode/2
+
+%% Note that prepare_request can return a diameter_packet containing a
+%% header or transport_data. Even allow the returned record to contain
+%% an encoded binary. This isn't the usual case and doesn't properly
+%% support retransmission but is useful for test.
+
+%% A message to be encoded.
+encode(Dict, #diameter_packet{bin = undefined} = Pkt) ->
+ diameter_codec:encode(Dict, Pkt);
+
+%% An encoded binary: just send.
+encode(_, #diameter_packet{} = Pkt) ->
+ Pkt.
+
+%% send_request/5
+
+send_request(TPid, #diameter_packet{bin = Bin} = Pkt, Req, _SvcName, Timeout)
+ when node() == node(TPid) ->
+ %% Store the outgoing request before sending to avoid a race with
+ %% reply reception.
+ TRef = store_request(TPid, Bin, Req, Timeout),
+ send(TPid, Pkt),
+ TRef;
+
+%% Send using a remote transport: spawn a process on the remote node
+%% to relay the answer.
+send_request(TPid, #diameter_packet{} = Pkt, Req, SvcName, Timeout) ->
+ TRef = erlang:start_timer(Timeout, self(), TPid),
+ T = {TPid, Pkt, Req, SvcName, Timeout, TRef},
+ spawn(node(TPid), ?MODULE, send, [T]),
+ TRef.
+
+%% send/1
+
+send({TPid, Pkt, #request{handler = Pid} = Req, SvcName, Timeout, TRef}) ->
+ Ref = send_request(TPid,
+ Pkt,
+ Req#request{handler = self()},
+ SvcName,
+ Timeout),
+ Pid ! reref(receive T -> T end, Ref, TRef).
+
+reref({T, Ref, R}, Ref, TRef) ->
+ {T, TRef, R};
+reref(T, _, _) ->
+ T.
+
+%% send/2
+
+send(Pid, Pkt) ->
+ Pid ! {send, Pkt}.
+
+%% retransmit/4
+
+retransmit({TPid, Caps, App}
+ = Transport,
+ #request{packet = Pkt0}
+ = Req,
+ SvcName,
+ Timeout) ->
+ have_request(Pkt0, TPid) %% Don't failover to a peer we've
+ andalso ?THROW(timeout), %% already sent to.
+
+ #diameter_packet{header = Hdr0} = Pkt0,
+ Hdr = Hdr0#diameter_header{is_retransmitted = true},
+ Pkt = Pkt0#diameter_packet{header = Hdr},
+
+ retransmit(cb(App, prepare_retransmit, [Pkt, SvcName, {TPid, Caps}]),
+ Transport,
+ Req#request{packet = Pkt},
+ SvcName,
+ Timeout,
+ []).
+
+retransmit({send, Msg},
+ Transport,
+ #request{packet = Pkt}
+ = Req,
+ SvcName,
+ Timeout,
+ Fs) ->
+ resend_request(make_request_packet(Msg, Pkt),
+ Transport,
+ Req,
+ SvcName,
+ Timeout,
+ Fs);
+
+retransmit({discard, Reason}, _, _, _, _, _) ->
+ ?THROW(Reason);
+
+retransmit(discard, _, _, _, _, _) ->
+ ?THROW(discarded);
+
+retransmit({eval_packet, RC, F}, Transport, Req, SvcName, Timeout, Fs) ->
+ retransmit(RC, Transport, Req, SvcName, Timeout, [F|Fs]);
+
+retransmit(T, {_, _, App}, _, _, _, _) ->
+ ?ERROR({invalid_return, prepare_retransmit, App, T}).
+
+resend_request(Pkt0,
+ {TPid, Caps, #diameter_app{dictionary = Dict}},
+ Req0,
+ SvcName,
+ Tmo,
+ Fs) ->
+ Pkt = encode(Dict, Pkt0, Fs),
+
+ Req = Req0#request{transport = TPid,
+ packet = Pkt0,
+ caps = Caps},
+
+ ?LOG(retransmission, Req),
+ TRef = send_request(TPid, Pkt, Req, SvcName, Tmo),
+ {TRef, Req}.
+
+%% store_request/4
+
+store_request(TPid, Bin, Req, Timeout) ->
+ Seqs = diameter_codec:sequence_numbers(Bin),
+ TRef = erlang:start_timer(Timeout, self(), timeout),
+ ets:insert(?REQUEST_TABLE, {Seqs, Req, TRef}),
+ ets:member(?REQUEST_TABLE, TPid)
+ orelse (self() ! {failover, TRef}), %% failover/1 may have missed
+ TRef.
+
+%% lookup_request/2
+
+lookup_request(Msg, TPid) ->
+ Seqs = diameter_codec:sequence_numbers(Msg),
+ Spec = [{{Seqs, #request{transport = TPid, _ = '_'}, '_'},
+ [],
+ ['$_']}],
+ case ets:select(?REQUEST_TABLE, Spec) of
+ [{_, Req, _}] ->
+ Req;
+ [] ->
+ false
+ end.
+
+%% erase_requests/1
+
+erase_requests(Pkt) ->
+ ets:delete(?REQUEST_TABLE, diameter_codec:sequence_numbers(Pkt)).
+
+%% match_requests/1
+
+match_requests(TPid) ->
+ Pat = {'_', #request{transport = TPid, _ = '_'}, '_'},
+ ets:select(?REQUEST_TABLE, [{Pat, [], ['$_']}]).
+
+%% have_request/2
+
+have_request(Pkt, TPid) ->
+ Seqs = diameter_codec:sequence_numbers(Pkt),
+ Pat = {Seqs, #request{transport = TPid, _ = '_'}, '_'},
+ '$end_of_table' /= ets:select(?REQUEST_TABLE, [{Pat, [], ['$_']}], 1).
+
+%% ---------------------------------------------------------------------------
+%% # failover/1-2
+%% ---------------------------------------------------------------------------
+
+failover(TPid)
+ when is_pid(TPid) ->
+ lists:foreach(fun failover/1, match_requests(TPid));
+%% Note that a request process can store its request after failover
+%% notifications are sent here: store_request/4 sends the notification
+%% in that case.
+
+%% Failover as a consequence of request_peer_down/1: inform the
+%% request process.
+failover({_, Req, TRef}) ->
+ #request{handler = Pid,
+ packet = #diameter_packet{msg = M}}
+ = Req,
+ M /= undefined andalso (Pid ! {failover, TRef}).
+%% Failover is not performed when msg = binary() since sending
+%% pre-encoded binaries is only partially supported. (Mostly for
+%% test.)
+
+%% get_destination/2
+
+get_destination(Dict, Msg) ->
+ [str(get_avp_value(Dict, D, Msg)) || D <- ['Destination-Realm',
+ 'Destination-Host']].
+
+%% This is not entirely correct. The avp could have an arity 1, in
+%% which case an empty list is a DiameterIdentity of length 0 rather
+%% than the list of no values we treat it as by mapping to undefined.
+%% This behaviour is documented.
+str([]) ->
+ undefined;
+str(T) ->
+ T.
+
+%% get_avp_value/3
+%%
+%% Find an AVP in a message of one of three forms:
+%%
+%% - a message record (as generated from a .dia spec) or
+%% - a list of an atom message name followed by 2-tuple, avp name/value pairs.
+%% - a list of a #diameter_header{} followed by #diameter_avp{} records,
+%%
+%% In the first two forms a dictionary module is used at encode to
+%% identify the type of the AVP and its arity in the message in
+%% question. The third form allows messages to be sent as is, without
+%% a dictionary, which is needed in the case of relay agents, for one.
+
+%% Messages will be header/avps list as a relay and the only AVP's we
+%% look for are in the common dictionary. This is required since the
+%% relay dictionary doesn't inherit the common dictionary (which maybe
+%% it should).
+get_avp_value(?RELAY, Name, Msg) ->
+ get_avp_value(?BASE, Name, Msg);
+
+%% Message sent as a header/avps list, probably a relay case but not
+%% necessarily.
+get_avp_value(Dict, Name, [#diameter_header{} | Avps]) ->
+ try
+ {Code, _, VId} = Dict:avp_header(Name),
+ [A|_] = lists:dropwhile(fun(#diameter_avp{code = C, vendor_id = V}) ->
+ C /= Code orelse V /= VId
+ end,
+ Avps),
+ avp_decode(Dict, Name, A)
+ catch
+ error: _ ->
+ undefined
+ end;
+
+%% Outgoing message as a name/values list.
+get_avp_value(_, Name, [_MsgName | Avps]) ->
+ case lists:keyfind(Name, 1, Avps) of
+ {_, V} ->
+ V;
+ _ ->
+ undefined
+ end;
+
+%% Message is typically a record but not necessarily.
+get_avp_value(Dict, Name, Rec) ->
+ try
+ Dict:'#get-'(Name, Rec)
+ catch
+ error:_ ->
+ undefined
+ end.
+
+avp_decode(Dict, Name, #diameter_avp{value = undefined,
+ data = Bin}) ->
+ Dict:avp(decode, Bin, Name);
+avp_decode(_, _, #diameter_avp{value = V}) ->
+ V.
+
+cb(#diameter_app{module = [_|_] = M}, F, A) ->
+ eval(M, F, A);
+cb([_|_] = M, F, A) ->
+ eval(M, F, A).
+
+eval([M|X], F, A) ->
+ apply(M, F, A ++ X).
+
+choose(true, X, _) -> X;
+choose(false, _, X) -> X.
+