diff options
Diffstat (limited to 'lib/diameter/test/diameter_relay_SUITE.erl')
-rw-r--r-- | lib/diameter/test/diameter_relay_SUITE.erl | 368 |
1 files changed, 368 insertions, 0 deletions
diff --git a/lib/diameter/test/diameter_relay_SUITE.erl b/lib/diameter/test/diameter_relay_SUITE.erl new file mode 100644 index 0000000000..03f1115496 --- /dev/null +++ b/lib/diameter/test/diameter_relay_SUITE.erl @@ -0,0 +1,368 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%% +%% Tests of traffic between seven Diameter nodes connected as follows. +%% +%% --- SERVER1.REALM2 +%% / +%% ---- RELAY.REALM2 ---- SERVER2.REALM2 +%% / | +%% CLIENT.REALM1 | +%% \ | +%% ---- RELAY.REALM3 ---- SERVER1.REALM3 +%% \ +%% --- SERVER2.REALM3 +%% + +-module(diameter_relay_SUITE). + +-export([suite/0, + all/0, + groups/0, + init_per_group/2, + end_per_group/2]). + +%% testcases +-export([start/1, + start_services/1, + connect/1, + send1/1, + send2/1, + send3/1, + send4/1, + send_loop/1, + send_timeout_1/1, + send_timeout_2/1, + disconnect/1, + stop_services/1, + stop/1]). + +%% diameter callbacks +-export([peer_up/3, + peer_down/3, + pick_peer/4, + prepare_request/3, + prepare_retransmit/3, + handle_answer/4, + handle_error/4, + handle_request/3]). + +-ifdef(DIAMETER_CT). +-include("diameter_gen_base_rfc3588.hrl"). +-else. +-include_lib("diameter/include/diameter_gen_base_rfc3588.hrl"). +-endif. + +-include_lib("diameter/include/diameter.hrl"). +-include("diameter_ct.hrl"). + +%% =========================================================================== + +-define(util, diameter_util). + +-define(ADDR, {127,0,0,1}). + +-define(CLIENT, "CLIENT.REALM1"). +-define(RELAY1, "RELAY.REALM2"). +-define(SERVER1, "SERVER1.REALM2"). +-define(SERVER2, "SERVER2.REALM2"). +-define(RELAY2, "RELAY.REALM3"). +-define(SERVER3, "SERVER1.REALM3"). +-define(SERVER4, "SERVER2.REALM3"). + +-define(SERVICES, [?CLIENT, + ?RELAY1, ?RELAY2, + ?SERVER1, ?SERVER2, ?SERVER3, ?SERVER4]). + +-define(DICT_COMMON, ?DIAMETER_DICT_COMMON). +-define(DICT_RELAY, ?DIAMETER_DICT_RELAY). + +-define(APP_ALIAS, the_app). +-define(APP_ID, ?DICT_COMMON:id()). + +%% Config for diameter:start_service/2. +-define(SERVICE(Host, Dict), + [{'Origin-Host', Host}, + {'Origin-Realm', realm(Host)}, + {'Host-IP-Address', [?ADDR]}, + {'Vendor-Id', 12345}, + {'Product-Name', "OTP/diameter"}, + {'Acct-Application-Id', [Dict:id()]}, + {application, [{alias, ?APP_ALIAS}, + {dictionary, Dict}, + {module, ?MODULE}, + {answer_errors, callback}]}]). + +-define(SUCCESS, 2001). +-define(LOOP_DETECTED, 3005). +-define(UNABLE_TO_DELIVER, 3002). + +-define(LOGOUT, ?'DIAMETER_BASE_TERMINATION-CAUSE_DIAMETER_LOGOUT'). +-define(AUTHORIZE_ONLY, ?'DIAMETER_BASE_RE-AUTH-REQUEST-TYPE_AUTHORIZE_ONLY'). + +%% =========================================================================== + +suite() -> + [{timetrap, {seconds, 10}}]. + +all() -> + [start, start_services, connect] + ++ tc() + ++ [{group, all}, + disconnect, + stop_services, + stop]. + +groups() -> + [{all, [parallel], tc()}]. + +init_per_group(_, Config) -> + Config. + +end_per_group(_, _) -> + ok. + +%% Traffic cases run when services are started and connections +%% established. +tc() -> + [send1, + send2, + send3, + send4, + send_loop, + send_timeout_1, + send_timeout_2]. + +%% =========================================================================== +%% start/stop testcases + +start(_Config) -> + ok = diameter:start(). + +start_services(_Config) -> + [S1,S2,S3,S4] = [server(N, ?DICT_COMMON) || N <- [?SERVER1, + ?SERVER2, + ?SERVER3, + ?SERVER4]], + [R1,R2] = [server(N, ?DICT_RELAY) || N <- [?RELAY1, ?RELAY2]], + + ok = diameter:start_service(?CLIENT, ?SERVICE(?CLIENT, ?DICT_COMMON)), + + {save_config, [{?RELAY1, [S1,S2,R2]}, + {?RELAY2, [S3,S4]}, + {?CLIENT, [R1,R2]}]}. + +connect(Config) -> + {_, Conns} = proplists:get_value(saved_config, Config), + + ?util:write_priv(Config, + "cfg", + lists:flatmap(fun({CN,Ss}) -> connect(CN, Ss) end, + Conns)). + +disconnect(Config) -> + lists:foreach(fun({{CN,CR},{SN,SR}}) -> ?util:disconnect(CN,CR,SN,SR) end, + ?util:read_priv(Config, "cfg")). + +stop_services(_Config) -> + [] = [{H,T} || H <- ?SERVICES, + T <- [diameter:stop_service(H)], + T /= ok]. + +stop(_Config) -> + ok = diameter:stop(). + +%% ---------------------------------------- + +server(Name, Dict) -> + ok = diameter:start_service(Name, ?SERVICE(Name, Dict)), + {Name, ?util:listen(Name, tcp)}. + +connect(Name, Refs) -> + [{{Name, ?util:connect(Name, tcp, LRef)}, T} || {_, LRef} = T <- Refs]. + +%% =========================================================================== +%% traffic testcases + +%% Send an STR intended for a specific server and expect success. +send1(_Config) -> + call(?SERVER1). +send2(_Config) -> + call(?SERVER2). +send3(_Config) -> + call(?SERVER3). +send4(_Config) -> + call(?SERVER4). + +%% Send an ASR that loops between the relays and expect the loop to +%% be detected. +send_loop(_Config) -> + Req = ['ASR', {'Destination-Realm', realm(?SERVER1)}, + {'Destination-Host', ?SERVER1}, + {'Auth-Application-Id', ?APP_ID}], + #'diameter_base_answer-message'{'Result-Code' = ?LOOP_DETECTED} + = call(Req, [{filter, realm}]). + +%% Send a RAR that is incorrectly routed and then discarded and expect +%% different results depending on whether or not we or the relay +%% timeout first. +send_timeout_1(_Config) -> + #'diameter_base_answer-message'{'Result-Code' = ?UNABLE_TO_DELIVER} + = send_timeout(7000). +send_timeout_2(_Config) -> + {error, timeout} = send_timeout(3000). + +send_timeout(Tmo) -> + Req = ['RAR', {'Destination-Realm', realm(?SERVER1)}, + {'Destination-Host', ?SERVER1}, + {'Auth-Application-Id', ?APP_ID}, + {'Re-Auth-Request-Type', ?AUTHORIZE_ONLY}], + call(Req, [{filter, realm}, {timeout, Tmo}]). + +%% =========================================================================== + +realm(Host) -> + tl(lists:dropwhile(fun(C) -> C /= $. end, Host)). + +call(Server) -> + Realm = realm(Server), + Req = ['STR', {'Destination-Realm', Realm}, + {'Destination-Host', [Server]}, + {'Termination-Cause', ?LOGOUT}, + {'Auth-Application-Id', ?APP_ID}], + #diameter_base_STA{'Result-Code' = ?SUCCESS, + 'Origin-Host' = Server, + 'Origin-Realm' = Realm} + = call(Req, [{filter, realm}]). + +call(Req, Opts) -> + diameter:call(?CLIENT, ?APP_ALIAS, Req, Opts). + +set([H|T], Vs) -> + [H | Vs ++ T]. + +%% =========================================================================== +%% diameter callbacks + +%% peer_up/3 + +peer_up(_SvcName, _Peer, State) -> + State. + +%% peer_down/3 + +peer_down(_SvcName, _Peer, State) -> + State. + +%% pick_peer/4 + +pick_peer([Peer | _], _, Svc, _State) + when Svc == ?RELAY1; + Svc == ?RELAY2; + Svc == ?CLIENT -> + {ok, Peer}. + +%% prepare_request/3 + +prepare_request(Pkt, Svc, _Peer) + when Svc == ?RELAY1; + Svc == ?RELAY2 -> + {send, Pkt}; + +prepare_request(Pkt, ?CLIENT, {_Ref, Caps}) -> + {send, prepare(Pkt, Caps)}. + +prepare(#diameter_packet{msg = Req}, Caps) -> + #diameter_caps{origin_host = {OH, _}, + origin_realm = {OR, _}} + = Caps, + set(Req, [{'Session-Id', diameter:session_id(OH)}, + {'Origin-Host', OH}, + {'Origin-Realm', OR}]). + +%% prepare_retransmit/3 + +prepare_retransmit(_Pkt, false, _Peer) -> + discard. + +%% handle_answer/4 + +%% A relay must return Pkt. +handle_answer(Pkt, _Req, Svc, _Peer) + when Svc == ?RELAY1; + Svc == ?RELAY2 -> + Pkt; + +handle_answer(Pkt, _Req, ?CLIENT, _Peer) -> + #diameter_packet{msg = Rec, errors = []} = Pkt, + Rec. + +%% handle_error/4 + +handle_error(Reason, _Req, _Svc, _Peer) -> + {error, Reason}. + +%% handle_request/3 + +handle_request(Pkt, OH, {_Ref, #diameter_caps{origin_host = {OH,_}} = Caps}) + when OH /= ?CLIENT -> + request(Pkt, Caps). + +%% RELAY1 routes any ASR or RAR to RELAY2 ... +request(#diameter_packet{header = #diameter_header{cmd_code = C}}, + #diameter_caps{origin_host = {?RELAY1, _}}) + when C == 274; %% ASR + C == 258 -> %% RAR + {relay, [{filter, {realm, realm(?RELAY2)}}]}; + +%% ... which in turn routes it back. Expect diameter to either answer +%% either with DIAMETER_LOOP_DETECTED/DIAMETER_UNABLE_TO_COMPLY. +request(#diameter_packet{header = #diameter_header{cmd_code = 274}}, + #diameter_caps{origin_host = {?RELAY2, _}}) -> + {relay, [{filter, {host, ?RELAY1}}]}; +request(#diameter_packet{header = #diameter_header{cmd_code = 258}}, + #diameter_caps{origin_host = {?RELAY2, _}}) -> + discard; + +%% Other request to a relay: send on to one of the servers in the +%% same realm. +request(_Pkt, #diameter_caps{origin_host = {OH, _}}) + when OH == ?RELAY1; + OH == ?RELAY2 -> + {relay, [{filter, {all, [host, realm]}}]}; + +%% Request received by a server: answer. +request(#diameter_packet{msg = #diameter_base_STR{'Session-Id' = SId, + 'Origin-Host' = Host, + 'Origin-Realm' = Realm, + 'Route-Record' = Route}}, + #diameter_caps{origin_host = {OH, _}, + origin_realm = {OR, _}}) -> + %% The request should have the Origin-Host/Realm of the original + %% sender. + R = realm(?CLIENT), + {?CLIENT, R} = {Host, Realm}, + %% A relay appends the identity of the peer that a request was + %% received from to the Route-Record avp. + [?CLIENT] = Route, + {reply, #diameter_base_STA{'Result-Code' = ?SUCCESS, + 'Session-Id' = SId, + 'Origin-Host' = OH, + 'Origin-Realm' = OR}}. |