diff options
Diffstat (limited to 'lib/diameter')
51 files changed, 2304 insertions, 904 deletions
diff --git a/lib/diameter/doc/src/diameter.xml b/lib/diameter/doc/src/diameter.xml index 00b54ffbc4..37e67d8630 100644 --- a/lib/diameter/doc/src/diameter.xml +++ b/lib/diameter/doc/src/diameter.xml @@ -21,7 +21,7 @@ <copyright> <year>2011</year> -<year>2014</year> +<year>2015</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -111,7 +111,7 @@ Defined in &dict_data_types;.</p> <tag><c>application_alias() = term()</c></tag> <item> <p> -A name identifying a Diameter application in +Name identifying a Diameter application in service configuration. Passed to &call; when sending requests defined by the application.</p> @@ -129,7 +129,7 @@ ExtraArgs = list() </pre> <p> -A module implementing the callback interface defined in &man_app;, +Module implementing the callback interface defined in &man_app;, along with any extra arguments to be appended to those documented. Note that extra arguments specific to an outgoing request can be @@ -156,7 +156,7 @@ Has one the following types.</p> <tag><c>{alias, &application_alias;}</c></tag> <item> <p> -A unique identifier for the application in the scope of the +Unique identifier for the application in the scope of the service. Defaults to the value of the <c>dictionary</c> option if unspecified.</p> @@ -165,7 +165,7 @@ unspecified.</p> <tag><c>{dictionary, atom()}</c></tag> <item> <p> -The name of an encode/decode module for the Diameter +Name of an encode/decode module for the Diameter messages defined by the application. These modules are generated from files whose format is documented in &man_dict;.</p> @@ -174,7 +174,7 @@ These modules are generated from files whose format is documented in <tag><c>{module, &application_module;}</c></tag> <item> <p> -The callback module with which messages of the Diameter application are +Callback module in which messages of the Diameter application are handled. See &man_app; for the required interface and semantics.</p> </item> @@ -182,7 +182,7 @@ See &man_app; for the required interface and semantics.</p> <tag><c>{state, term()}</c></tag> <item> <p> -The initial callback state. +Initial callback state. The prevailing state is passed to some &man_app; callbacks, which can then return a new state. @@ -192,7 +192,7 @@ Defaults to the value of the <c>alias</c> option if unspecified.</p> <tag><c>{call_mutates_state, true|false}</c></tag> <item> <p> -Specifies whether or not the &app_pick_peer; +Whether or not the &app_pick_peer; application callback can modify the application state. Defaults to <c>false</c> if unspecified.</p> @@ -209,7 +209,7 @@ probably avoid it.</p> <tag><c>{answer_errors, callback|report|discard}</c></tag> <item> <p> -Determines the manner in which incoming answer messages containing +Manner in which incoming answer messages containing decode errors are handled.</p> <p> @@ -233,7 +233,7 @@ Defaults to <c>discard</c> if unspecified.</p> <tag><c>{request_errors, answer_3xxx|answer|callback}</c></tag> <item> <p> -Determines the manner in which incoming requests are handled when an +Manner in which incoming requests are handled when an error other than 3007 (DIAMETER_APPLICATION_UNSUPPORTED, which cannot be associated with an application callback module), is detected.</p> @@ -293,7 +293,7 @@ Multiple options append to the argument list.</p> <tag><c>{filter, &peer_filter;}</c></tag> <item> <p> -A filter to apply to the list of available peers before passing it to +Filter to apply to the list of available peers before passing it to the &app_pick_peer; callback for the application in question. Multiple options are equivalent a single <c>all</c> filter on the corresponding list of filters. @@ -303,7 +303,7 @@ Defaults to <c>none</c>.</p> <tag><c>{timeout, &dict_Unsigned32;}</c></tag> <item> <p> -The number of milliseconds after which the request should +Number of milliseconds after which the request should timeout. Defaults to 5000.</p> </item> @@ -311,7 +311,7 @@ Defaults to 5000.</p> <tag><c>detach</c></tag> <item> <p> -Causes &call; to return <c>ok</c> as +Cause &call; to return <c>ok</c> as soon as the request in question has been encoded, instead of waiting for and returning the result from a subsequent &app_handle_answer; or @@ -427,7 +427,7 @@ configuration passed to &start_service; or &add_transport;.</p> <tag><c>peer_filter() = term()</c></tag> <item> <p> -A filter passed to &call; in order to select candidate peers for a +Filter passed to &call; in order to select candidate peers for a &app_pick_peer; callback. Has one of the following types.</p> @@ -674,7 +674,7 @@ connection establishment.</p> <tag><c>{'CEA', Result, Caps, Pkt}</c></tag> <item> <pre> -Result = integer() | atom() | {capabilities_cb, CB, ResultCode|discard} +Result = ResultCode | atom() | {capabilities_cb, CB, ResultCode|discard} Caps = #diameter_caps{} Pkt = #diameter_packet{} ResultCode = integer() @@ -742,7 +742,7 @@ info fields of forms other than the above.</p> <tag><c>service_name() = term()</c></tag> <item> <p> -The name of a service as passed to &start_service; and with which the +Name of a service as passed to &start_service; and with which the service is identified. There can be at most one service with a given name on a given node. Note that &make_ref; @@ -754,7 +754,7 @@ can be used to generate a service name that is somewhat unique.</p> <tag><c>service_opt()</c></tag> <item> <p> -An option passed to &start_service;. +Option passed to &start_service;. Can be any <c>&capability;</c> as well as the following.</p> <taglist> @@ -762,7 +762,7 @@ Can be any <c>&capability;</c> as well as the following.</p> <tag><c>{application, [&application_opt;]}</c></tag> <item> <p> -Defines a Diameter application supported by the service.</p> +A Diameter application supported by the service.</p> <p> A service must configure one tuple for each Diameter @@ -790,7 +790,7 @@ be matched by corresponding &capability; configuration, of | evaluable()}</c></tag> <item> <p> -Specifies the degree to which the service allows multiple transport +The degree to which the service allows multiple transport connections to the same peer, as identified by its Origin-Host at capabilities exchange.</p> @@ -816,7 +816,7 @@ Defaults to <c>nodes</c>.</p> <tag><c>{sequence, {H,N} | &evaluable;}</c></tag> <item> <p> -Specifies a constant value <c>H</c> for the topmost <c>32-N</c> bits of +A constant value <c>H</c> for the topmost <c>32-N</c> bits of of 32-bit End-to-End and Hop-by-Hop Identifiers generated by the service, either explicitly or as a return value of a function to be evaluated at &start_service;. @@ -851,7 +851,7 @@ outgoing requests.</p> <tag><c>{share_peers, boolean() | [node()] | evaluable()}</c></tag> <item> <p> -Specifies nodes to which peer connections established on the local +Nodes to which peer connections established on the local Erlang node are communicated. Shared peers become available in the remote candidates list passed to &app_pick_peer; callbacks on remote nodes whose services are @@ -890,7 +890,7 @@ of a single Diameter node across multiple Erlang nodes.</p> <tag><c>{spawn_opt, [term()]}</c></tag> <item> <p> -An options list passed to &spawn_opt; when spawning a process for an +Options list passed to &spawn_opt; when spawning a process for an incoming Diameter request, unless the transport in question specifies another value. Options <c>monitor</c> and <c>link</c> are ignored.</p> @@ -899,10 +899,34 @@ Options <c>monitor</c> and <c>link</c> are ignored.</p> Defaults to the empty list.</p> </item> +<marker id="string_decode"/> +<tag><c>{string_decode, boolean()}</c></tag> +<item> +<p> +Whether or not to decode AVPs of type &dict_OctetString; and its +derived types &dict_DiameterIdentity;, &dict_DiameterURI;, +&dict_IPFilterRule;, &dict_QoSFilterRule;, and &dict_UTF8String;. +If <c>true</c> then AVPs of these types are decoded to string(). +If <c>false</c> then values are retained as binary().</p> + +<p> +Defaults to <c>true</c>.</p> + +<warning> +<p> +This option should be set to <c>false</c> +since a sufficiently malicious peer can otherwise cause large amounts +of memory to be consumed when decoded Diameter messages are passed +between processes. +The default value is for backwards compatibility.</p> +</warning> + +</item> + <tag><c>{use_shared_peers, boolean() | [node()] | evaluable()}</c></tag> <item> <p> -Specifies nodes from which communicated peers are made available in +Nodes from which communicated peers are made available in the remote candidates list of &app_pick_peer; callbacks.</p> <p> @@ -942,7 +966,7 @@ each node from which requests are sent.</p> <tag><c>transport_opt()</c></tag> <item> <p> -An option passed to &add_transport;. +Option passed to &add_transport;. Has one of the following types.</p> <taglist> @@ -950,8 +974,7 @@ Has one of the following types.</p> <tag><c>{applications, [&application_alias;]}</c></tag> <item> <p> -The list of Diameter applications to which the transport should be -restricted. +Diameter applications to which the transport should be restricted. Defaults to all applications configured on the service in question. Applications not configured on the service in question are ignored.</p> @@ -984,7 +1007,7 @@ TLS is desired over TCP as implemented by &man_tcp;.</p> <tag><c>{capabilities_cb, &evaluable;}</c></tag> <item> <p> -A callback invoked upon reception of CER/CEA during capabilities +Callback invoked upon reception of CER/CEA during capabilities exchange in order to ask whether or not the connection should be accepted. Applied to the <c>&transport_ref;</c> and @@ -1032,7 +1055,7 @@ case the corresponding callbacks are applied until either all return <tag><c>{capx_timeout, &dict_Unsigned32;}</c></tag> <item> <p> -The number of milliseconds after which a transport process having an +Number of milliseconds after which a transport process having an established transport connection will be terminated if the expected capabilities exchange message (CER or CEA) is not received from the peer. For a connecting transport, the timing of connection attempts is @@ -1079,7 +1102,7 @@ transport.</p> <item> <p> -A callback invoked prior to terminating the transport process of a +Callback invoked prior to terminating the transport process of a transport connection having watchdog state <c>OKAY</c>. Applied to <c>application|service|transport</c> and the <c>&transport_ref;</c> and <c>&app_peer;</c> in question: @@ -1095,7 +1118,7 @@ The return value can have one of the following types.</p> <tag><c>{dpr, [option()]}</c></tag> <item> <p> -Causes Disconnect-Peer-Request to be sent to the peer, the transport +Send Disconnect-Peer-Request to the peer, the transport process being terminated following reception of Disconnect-Peer-Answer or timeout. An <c>option()</c> can be one of the following.</p> @@ -1104,7 +1127,7 @@ An <c>option()</c> can be one of the following.</p> <tag><c>{cause, 0|rebooting|1|busy|2|goaway}</c></tag> <item> <p> -The Disconnect-Cause to send, <c>REBOOTING</c>, <c>BUSY</c> and +Disconnect-Cause to send, <c>REBOOTING</c>, <c>BUSY</c> and <c>DO_NOT_WANT_TO_TALK_TO_YOU</c> respectively. Defaults to <c>rebooting</c> for <c>Reason=service|application</c> and <c>goaway</c> for <c>Reason=transport</c>.</p> @@ -1113,9 +1136,9 @@ Defaults to <c>rebooting</c> for <c>Reason=service|application</c> and <tag><c>{timeout, &dict_Unsigned32;}</c></tag> <item> <p> -The number of milliseconds after which the transport process is +Number of milliseconds after which the transport process is terminated if DPA has not been received. -Defaults to 1000.</p> +Defaults to the value of &dpa_timeout;.</p> </item> </taglist> </item> @@ -1129,7 +1152,7 @@ Equivalent to <c>{dpr, []}</c>.</p> <tag><c>close</c></tag> <item> <p> -Causes the transport process to be terminated without +Terminate the transport process without Disconnect-Peer-Request being sent to the peer.</p> </item> @@ -1152,11 +1175,34 @@ configured them.</p> Defaults to a single callback returning <c>dpr</c>.</p> </item> +<marker id="dpa_timeout"/> +<tag><c>{dpa_timeout, &dict_Unsigned32;}</c></tag> +<item> +<p> +Number of milliseconds after which a transport connection is +terminated following an outgoing DPR if DPA is not received.</p> + +<p> +Defaults to 1000.</p> +</item> + +<marker id="dpr_timeout"/> +<tag><c>{dpr_timeout, &dict_Unsigned32;}</c></tag> +<item> +<p> +Number of milliseconds after which a transport connection is +terminated following an incoming DPR if the peer does not close the +connection.</p> + +<p> +Defaults to 5000.</p> +</item> + <marker id="length_errors"/> <tag><c>{length_errors, exit|handle|discard}</c></tag> <item> <p> -Specifies how to deal with errors in the Message Length field of the +How to deal with errors in the Message Length field of the Diameter Header in an incoming message. An error in this context is that the length is not at least 20 bytes (the length of a Header), is not a multiple of 4 (a valid length) or @@ -1188,11 +1234,26 @@ See &man_tcp; for the behaviour of that module.</p> </note> </item> +<tag><c>{pool_size, pos_integer()}</c></tag> +<item> +<p> +Number of transport processes to start. +For a listening transport, determines the size of the pool of +accepting transport processes, a larger number being desirable for +processing multiple concurrent peer connection attempts. +For a connecting transport, determines the number of connections to +the peer in question that will be attempted to be establshed: +the &service_opt;: <c>restrict_connections</c> should also be +configured on the service in question to allow multiple connections to +the same peer.</p> + +</item> + <marker id="spawn_opt"/> <tag><c>{spawn_opt, [term()]}</c></tag> <item> <p> -An options list passed to &spawn_opt; when spawning a process for an +Options passed to &spawn_opt; when spawning a process for an incoming Diameter request. Options <c>monitor</c> and <c>link</c> are ignored.</p> @@ -1205,7 +1266,7 @@ Defaults to the list configured on the service if not specified.</p> <tag><c>{transport_config, term(), &dict_Unsigned32; | infinity}</c></tag> <item> <p> -A term passed as the third argument to the &transport_start; function of +Term passed as the third argument to the &transport_start; function of the relevant &transport_module; in order to start a transport process. Defaults to the empty list if unspecified.</p> @@ -1233,7 +1294,7 @@ To listen on both SCTP and TCP, define one transport for each.</p> <tag><c>{transport_module, atom()}</c></tag> <item> <p> -A module implementing a transport process as defined in &man_transport;. +Module implementing a transport process as defined in &man_transport;. Defaults to <c>diameter_tcp</c> if unspecified.</p> <p> @@ -1253,7 +1314,7 @@ corresponding timeout (see below) or all fail.</p> <tag><c>{watchdog_config, [{okay|suspect, non_neg_integer()}]}</c></tag> <item> <p> -Specifies configuration that alters the behaviour of the watchdog +Configuration that alters the behaviour of the watchdog state machine. On key <c>okay</c>, the non-negative number of answered DWR messages before transitioning from REOPEN to OKAY. @@ -1308,7 +1369,7 @@ in predicate functions passed to &remove_transport;.</p> <tag><c>transport_ref() = reference()</c></tag> <item> <p> -An reference returned by &add_transport; that +Reference returned by &add_transport; that identifies the configuration.</p> </item> @@ -1737,6 +1798,14 @@ connection might look as follows.</p> The information presented here is as in the <c>connect</c> case except that the client connections are grouped under an <c>accept</c> tuple.</p> +<p> +Whether or not the &transport_opt; <c>pool_size</c> affects the format +of the listing in the case of a connecting transport, since a value +greater than 1 implies multiple transport processes for the same +<c>&transport_ref;</c>, as in the listening case. +The format in this case is similar to the listening case, with a +<c>pool</c> tuple in place of an <c>accept</c> tuple.</p> + </item> <tag><c>connections</c></tag> diff --git a/lib/diameter/doc/src/diameter_dict.xml b/lib/diameter/doc/src/diameter_dict.xml index 810a146b88..9db9bcffde 100644 --- a/lib/diameter/doc/src/diameter_dict.xml +++ b/lib/diameter/doc/src/diameter_dict.xml @@ -529,6 +529,11 @@ answer record and passed to a &app_handle_request; callback upon reception of an incoming request.</p> <p> +In cases in which there is a choice between list() and binary() types +for OctetString() and derived types, the representation is determined +by the value of &mod_string_decode;.</p> + +<p> <em>Basic AVP Data Formats</em></p> <marker id="OctetString"/> @@ -541,7 +546,7 @@ callback upon reception of an incoming request.</p> <marker id="Grouped"/> <pre> -OctetString() = [0..255] +OctetString() = string() | binary() Integer32() = -2147483647..2147483647 Integer64() = -9223372036854775807..9223372036854775807 Unsigned32() = 0..4294967295 @@ -603,7 +608,7 @@ and <c>{{2104,2,26},{9,42,23}}</c> (both inclusive) can be encoded.</p> <marker id="UTF8String"/> <pre> -UTF8String() = [integer()] +UTF8String() = [integer()] | binary() </pre> <p> diff --git a/lib/diameter/doc/src/seealso.ent b/lib/diameter/doc/src/seealso.ent index 44541afb9b..4e205ffad7 100644 --- a/lib/diameter/doc/src/seealso.ent +++ b/lib/diameter/doc/src/seealso.ent @@ -4,7 +4,7 @@ %CopyrightBegin% -Copyright Ericsson AB 2012-2014. All Rights Reserved. +Copyright Ericsson AB 2012-2015. All Rights Reserved. The contents of this file are subject to the Erlang Public License, Version 1.1, (the "License"); you may not use this file except in @@ -64,11 +64,14 @@ significant. <!ENTITY capabilities_cb '<seealso marker="#capabilities_cb">capabilities_cb</seealso>'> <!ENTITY capx_timeout '<seealso marker="#capx_timeout">capx_timeout</seealso>'> <!ENTITY disconnect_cb '<seealso marker="#disconnect_cb">disconnect_cb</seealso>'> +<!ENTITY dpa_timeout '<seealso marker="#dpa_timeout">dpa_timeout</seealso>'> <!ENTITY transport_config '<seealso marker="#transport_config">transport_config</seealso>'> <!ENTITY transport_module '<seealso marker="#transport_module">transport_module</seealso>'> <!ENTITY connect_timer '<seealso marker="#connect_timer">connect_timer</seealso>'> <!ENTITY watchdog_timer '<seealso marker="#watchdog_timer">watchdog_timer</seealso>'> +<!ENTITY mod_string_decode '<seealso marker="diameter#service_opt">diameter:service_opt()</seealso> <seealso marker="diameter#string_decode">string_decode</seealso>'> + <!-- diameter_app --> <!ENTITY app_handle_answer '<seealso marker="diameter_app#Mod:handle_answer-4">handle_answer/4</seealso>'> @@ -102,6 +105,9 @@ significant. <!ENTITY dict_Address '<seealso marker="diameter_dict#DATA_TYPES">Address()</seealso>'> <!ENTITY dict_DiameterIdentity '<seealso marker="diameter_dict#DATA_TYPES">DiameterIdentity()</seealso>'> +<!ENTITY dict_DiameterURI '<seealso marker="diameter_dict#DATA_TYPES">DiameterURI()</seealso>'> +<!ENTITY dict_IPFilterRule '<seealso marker="diameter_dict#DATA_TYPES">IPFilterRule()</seealso>'> +<!ENTITY dict_QoSFilterRule '<seealso marker="diameter_dict#DATA_TYPES">QoSFilterRule()</seealso>'> <!ENTITY dict_Grouped '<seealso marker="diameter_dict#DATA_TYPES">Grouped()</seealso>'> <!ENTITY dict_OctetString '<seealso marker="diameter_dict#DATA_TYPES">OctetString()</seealso>'> <!ENTITY dict_Time '<seealso marker="diameter_dict#DATA_TYPES">Time()</seealso>'> diff --git a/lib/diameter/examples/code/GNUmakefile b/lib/diameter/examples/code/GNUmakefile index 98e36a99e3..81f1da5a39 100644 --- a/lib/diameter/examples/code/GNUmakefile +++ b/lib/diameter/examples/code/GNUmakefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2010-2012. All Rights Reserved. +# Copyright Ericsson AB 2010-2015. All Rights Reserved. # # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in @@ -20,7 +20,7 @@ EXAMPLES = client server relay # redirect proxy CALLBACKS = $(EXAMPLES:%=%_cb) -MODULES = peer $(EXAMPLES) $(EXAMPLES:%=%_cb) +MODULES = node $(EXAMPLES) $(EXAMPLES:%=%_cb) BEAM = $(MODULES:%=%.beam) diff --git a/lib/diameter/examples/code/client.erl b/lib/diameter/examples/code/client.erl index 46eb4a55db..844c9cdbdd 100644 --- a/lib/diameter/examples/code/client.erl +++ b/lib/diameter/examples/code/client.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -38,9 +38,10 @@ -module(client). -include_lib("diameter/include/diameter.hrl"). --include_lib("diameter/include/diameter_gen_base_rfc3588.hrl"). +-include_lib("diameter/include/diameter_gen_base_rfc6733.hrl"). -export([start/1, %% start a service + start/2, %% connect/2, %% add a connecting transport call/1, %% send using the record encoding cast/1, %% send using the list encoding and detached @@ -50,17 +51,14 @@ %% both the record and list encoding here, one detached and one not, %% is just for demonstration purposes. -%% Convenience functions using the default service name, ?SVC_NAME. +%% Convenience functions using the default service name. -export([start/0, connect/1, stop/0, call/0, cast/0]). --define(SVC_NAME, ?MODULE). --define(APP_ALIAS, ?MODULE). --define(CALLBACK_MOD, client_cb). - +-define(DEF_SVC_NAME, ?MODULE). -define(L, atom_to_list). %% The service configuration. As in the server example, a client @@ -70,27 +68,40 @@ {'Origin-Realm', "example.com"}, {'Vendor-Id', 0}, {'Product-Name', "Client"}, - {'Auth-Application-Id', [?DIAMETER_APP_ID_COMMON]}, - {application, [{alias, ?APP_ALIAS}, - {dictionary, ?DIAMETER_DICT_COMMON}, - {module, ?CALLBACK_MOD}]}]). + {'Auth-Application-Id', [0]}, + {string_decode, false}, + {application, [{alias, common}, + {dictionary, diameter_gen_base_rfc6733}, + {module, client_cb}]}]). %% start/1 start(Name) when is_atom(Name) -> - peer:start(Name, ?SERVICE(Name)). + start(Name, []); + +start(Opts) + when is_list(Opts) -> + start(?DEF_SVC_NAME, Opts). + +%% start/0 start() -> - start(?SVC_NAME). + start(?DEF_SVC_NAME). + +%% start/2 + +start(Name, Opts) -> + node:start(Name, Opts ++ [T || {K,_} = T <- ?SERVICE(Name), + false == lists:keymember(K, 1, Opts)]). %% connect/2 connect(Name, T) -> - peer:connect(Name, T). + node:connect(Name, T). connect(T) -> - connect(?SVC_NAME, T). + connect(?DEF_SVC_NAME, T). %% call/1 @@ -99,10 +110,10 @@ call(Name) -> RAR = #diameter_base_RAR{'Session-Id' = SId, 'Auth-Application-Id' = 0, 'Re-Auth-Request-Type' = 0}, - diameter:call(Name, ?APP_ALIAS, RAR, []). + diameter:call(Name, common, RAR, []). call() -> - call(?SVC_NAME). + call(?DEF_SVC_NAME). %% cast/1 @@ -111,15 +122,15 @@ cast(Name) -> RAR = ['RAR', {'Session-Id', SId}, {'Auth-Application-Id', 0}, {'Re-Auth-Request-Type', 1}], - diameter:call(Name, ?APP_ALIAS, RAR, [detach]). + diameter:call(Name, common, RAR, [detach]). cast() -> - cast(?SVC_NAME). + cast(?DEF_SVC_NAME). %% stop/1 stop(Name) -> - peer:stop(Name). + node:stop(Name). stop() -> - stop(?SVC_NAME). + stop(?DEF_SVC_NAME). diff --git a/lib/diameter/examples/code/node.erl b/lib/diameter/examples/code/node.erl new file mode 100644 index 0000000000..4fe9007059 --- /dev/null +++ b/lib/diameter/examples/code/node.erl @@ -0,0 +1,174 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%% +%% A library module used by the example Diameter nodes. Does little +%% more than provide an alternate/simplified transport configuration. +%% + +-module(node). + +-export([start/2, + listen/2, + connect/2, + stop/1]). + +-type protocol() + :: tcp | sctp. + +-type ip_address() + :: default + | inet:ip_address(). + +-type server_transport() + :: protocol() + | {protocol(), ip_address(), non_neg_integer()}. + +-type server_opts() + :: server_transport() + | {server_transport(), [diameter:transport_opt()]} + | [diameter:transport_opt()]. + +-type client_transport() + :: protocol() | any + | {protocol() | any, ip_address(), non_neg_integer()} + | {protocol() | any, ip_address(), ip_address(), non_neg_integer()}. + +-type client_opts() + :: client_transport() + | {client_transport(), [diameter:transport_opt()]} + | [diameter:transport_opt()]. + +%% The server_transport() and client_transport() config is just +%% convenience: arbitrary options can be specifed as a +%% [diameter:transport_opt()]. + +-define(DEFAULT_PORT, 3868). + +%% --------------------------------------------------------------------------- +%% Interface functions +%% --------------------------------------------------------------------------- + +%% start/2 + +-spec start(diameter:service_name(), [diameter:service_opt()]) + -> ok + | {error, term()}. + +start(Name, Opts) + when is_atom(Name), is_list(Opts) -> + diameter:start_service(Name, Opts). + +%% connect/2 + +-spec connect(diameter:service_name(), client_opts()) + -> {ok, diameter:transport_ref()} + | {error, term()}. + +connect(Name, Opts) + when is_list(Opts) -> + diameter:add_transport(Name, {connect, Opts}); + +connect(Name, {T, Opts}) -> + connect(Name, Opts ++ client_opts(T)); + +connect(Name, T) -> + connect(Name, [{connect_timer, 5000} | client_opts(T)]). + +%% listen/2 + +-spec listen(diameter:service_name(), server_opts()) + -> {ok, diameter:transport_ref()} + | {error, term()}. + +listen(Name, Opts) + when is_list(Opts) -> + diameter:add_transport(Name, {listen, Opts}); + +listen(Name, {T, Opts}) -> + listen(Name, Opts ++ server_opts(T)); + +listen(Name, T) -> + listen(Name, server_opts(T)). + +%% stop/1 + +-spec stop(diameter:service_name()) + -> ok + | {error, term()}. + +stop(Name) -> + diameter:stop_service(Name). + +%% --------------------------------------------------------------------------- +%% Internal functions +%% --------------------------------------------------------------------------- + +%% server_opts/1 +%% +%% Return transport options for a listening transport. + +server_opts({T, Addr, Port}) -> + [{transport_module, tmod(T)}, + {transport_config, [{reuseaddr, true}, + {ip, addr(Addr)}, + {port, Port}]}]; + +server_opts(T) -> + server_opts({T, loopback, ?DEFAULT_PORT}). + +%% client_opts/1 +%% +%% Return transport options for a connecting transport. + +client_opts({T, LA, RA, RP}) + when T == all; %% backwards compatibility + T == any -> + [[S, {C,Os}], T] = [client_opts({P, LA, RA, RP}) || P <- [sctp,tcp]], + [S, {C,Os,2000} | T]; + +client_opts({T, LA, RA, RP}) -> + [{transport_module, tmod(T)}, + {transport_config, [{raddr, addr(RA)}, + {rport, RP}, + {reuseaddr, true} + | ip(LA)]}]; + +client_opts({T, RA, RP}) -> + client_opts({T, default, RA, RP}); + +client_opts(T) -> + client_opts({T, loopback, loopback, ?DEFAULT_PORT}). + +%% --------------------------------------------------------------------------- + +tmod(tcp) -> diameter_tcp; +tmod(sctp) -> diameter_sctp. + +ip(default) -> + []; +ip(loopback) -> + [{ip, {127,0,0,1}}]; +ip(Addr) -> + [{ip, Addr}]. + +addr(loopback) -> + {127,0,0,1}; +addr(A) -> + A. diff --git a/lib/diameter/examples/code/peer.erl b/lib/diameter/examples/code/peer.erl deleted file mode 100644 index 7519abfb2c..0000000000 --- a/lib/diameter/examples/code/peer.erl +++ /dev/null @@ -1,150 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% - -%% -%% A library module that factors out commonality in the example -%% Diameter peers. -%% - --module(peer). - --include_lib("diameter/include/diameter.hrl"). --include_lib("diameter/include/diameter_gen_base_rfc3588.hrl"). - --export([start/2, - listen/2, - connect/2, - stop/1]). - --type service_name() - :: term(). - --type protocol() - :: tcp | sctp. - --type ip_address() - :: default - | inet:ip_address(). - --type server_config() - :: protocol() - | {protocol(), ip_address(), non_neg_integer()}. - --type client_config() - :: protocol() - | {protocol(), ip_address(), non_neg_integer()} - | {protocol(), ip_address(), ip_address(), non_neg_integer()}. - --define(DEFAULT_PORT, 3868). - -%% --------------------------------------------------------------------------- -%% Interface functions -%% --------------------------------------------------------------------------- - -%% start/2 - --spec start(service_name(), list()) - -> ok - | {error, term()}. - -start(Name, Opts) - when is_atom(Name), is_list(Opts) -> - diameter:start_service(Name, Opts). - -%% connect/2 - --spec connect(service_name(), client_config()) - -> {ok, reference()} - | {error, term()}. - -connect(Name, T) -> - diameter:add_transport(Name, {connect, [{connect_timer, 5000} - | client(T)]}). - -%% listen/2 - --spec listen(service_name(), server_config()) - -> {ok, reference()} - | {error, term()}. - -listen(Name, T) -> - diameter:add_transport(Name, {listen, server(T)}). - -%% stop/1 - --spec stop(service_name()) - -> ok - | {error, term()}. - -stop(Name) -> - diameter:stop_service(Name). - -%% --------------------------------------------------------------------------- -%% Internal functions -%% --------------------------------------------------------------------------- - -%% server/1 -%% -%% Return config for a listening transport. - -server({T, Addr, Port}) -> - [{transport_module, tmod(T)}, - {transport_config, [{reuseaddr, true}, - {ip, addr(Addr)}, - {port, Port}]}]; - -server(T) -> - server({T, loopback, ?DEFAULT_PORT}). - -%% client/1 -%% -%% Return config for a connecting transport. - -client({all, LA, RA, RP}) -> - [[M,{K,C}], T] - = [client({P, LA, RA, RP}) || P <- [sctp,tcp]], - [M, {K,C,2000} | T]; - -client({T, LA, RA, RP}) -> - [{transport_module, tmod(T)}, - {transport_config, [{raddr, addr(RA)}, - {rport, RP}, - {reuseaddr, true} - | ip(LA)]}]; - -client({T, RA, RP}) -> - client({T, default, RA, RP}); - -client(T) -> - client({T, loopback, loopback, ?DEFAULT_PORT}). - -tmod(tcp) -> diameter_tcp; -tmod(sctp) -> diameter_sctp. - -ip(default) -> - []; -ip(loopback) -> - [{ip, {127,0,0,1}}]; -ip(Addr) -> - [{ip, Addr}]. - -addr(loopback) -> - {127,0,0,1}; -addr(A) -> - A. diff --git a/lib/diameter/examples/code/relay.erl b/lib/diameter/examples/code/relay.erl index d3438f83f3..7bc46dc68d 100644 --- a/lib/diameter/examples/code/relay.erl +++ b/lib/diameter/examples/code/relay.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2012. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -31,10 +31,8 @@ -module(relay). --include_lib("diameter/include/diameter.hrl"). --include_lib("diameter/include/diameter_gen_base_rfc3588.hrl"). - -export([start/1, + start/2, listen/2, connect/2, stop/1]). @@ -44,49 +42,56 @@ connect/1, stop/0]). --define(APP_ALIAS, ?MODULE). --define(SVC_NAME, ?MODULE). --define(CALLBACK_MOD, relay_cb). +-define(DEF_SVC_NAME, ?MODULE). %% The service configuration. -define(SERVICE(Name), [{'Origin-Host', atom_to_list(Name) ++ ".example.com"}, {'Origin-Realm', "example.com"}, {'Vendor-Id', 193}, {'Product-Name', "RelayAgent"}, - {'Auth-Application-Id', [?DIAMETER_APP_ID_RELAY]}, - {application, [{alias, ?MODULE}, - {dictionary, ?DIAMETER_DICT_RELAY}, - {module, ?CALLBACK_MOD}]}]). + {'Auth-Application-Id', [16#FFFFFFFF]}, + {string_decode, false}, + {application, [{alias, relay}, + {dictionary, diameter_relay}, + {module, relay_cb}]}]). %% start/1 start(Name) when is_atom(Name) -> - peer:start(Name, ?SERVICE(Name)). + start(Name, []). + +%% start/1 start() -> - start(?SVC_NAME). + start(?DEF_SVC_NAME). + +%% start/2 + +start(Name, Opts) -> + node:start(Name, Opts ++ [T || {K,_} = T <- ?SERVICE(Name), + false == lists:keymember(K, 1, Opts)]). %% listen/2 listen(Name, T) -> - peer:listen(Name, T). + node:listen(Name, T). listen(T) -> - listen(?SVC_NAME, T). + listen(?DEF_SVC_NAME, T). %% connect/2 connect(Name, T) -> - peer:connect(Name, T). + node:connect(Name, T). connect(T) -> - connect(?SVC_NAME, T). + connect(?DEF_SVC_NAME, T). %% stop/1 stop(Name) -> - peer:stop(Name). + node:stop(Name). stop() -> - stop(?SVC_NAME). + stop(?DEF_SVC_NAME). diff --git a/lib/diameter/examples/code/server.erl b/lib/diameter/examples/code/server.erl index 3959461cec..f32cec594c 100644 --- a/lib/diameter/examples/code/server.erl +++ b/lib/diameter/examples/code/server.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2012. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -34,21 +34,17 @@ -module(server). --include_lib("diameter/include/diameter.hrl"). --include_lib("diameter/include/diameter_gen_base_rfc3588.hrl"). - -export([start/1, %% start a service + start/2, %% listen/2, %% add a listening transport stop/1]). %% stop a service -%% Convenience functions using the default service name, ?SVC_NAME. +%% Convenience functions using the default service name. -export([start/0, listen/1, stop/0]). --define(SVC_NAME, ?MODULE). --define(APP_ALIAS, ?MODULE). --define(CALLBACK_MOD, server_cb). +-define(DEF_SVC_NAME, ?MODULE). %% The service configuration. In a server supporting multiple Diameter %% applications each application may have its own, although they could all @@ -57,32 +53,46 @@ {'Origin-Realm', "example.com"}, {'Vendor-Id', 193}, {'Product-Name', "Server"}, - {'Auth-Application-Id', [?DIAMETER_APP_ID_COMMON]}, - {application, [{alias, ?APP_ALIAS}, - {dictionary, ?DIAMETER_DICT_COMMON}, - {module, ?CALLBACK_MOD}]}]). + {'Auth-Application-Id', [0]}, + {restrict_connections, false}, + {string_decode, false}, + {application, [{alias, common}, + {dictionary, diameter_gen_base_rfc6733}, + {module, server_cb}]}]). %% start/1 start(Name) when is_atom(Name) -> - peer:start(Name, ?SERVICE(Name)). + start(Name, []); + +start(Opts) + when is_list(Opts) -> + start(?DEF_SVC_NAME, Opts). + +%% start/0 start() -> - start(?SVC_NAME). + start(?DEF_SVC_NAME). + +%% start/2 + +start(Name, Opts) -> + node:start(Name, Opts ++ [T || {K,_} = T <- ?SERVICE(Name), + false == lists:keymember(K, 1, Opts)]). %% listen/2 listen(Name, T) -> - peer:listen(Name, T). + node:listen(Name, T). listen(T) -> - listen(?SVC_NAME, T). + listen(?DEF_SVC_NAME, T). %% stop/1 stop(Name) -> - peer:stop(Name). + node:stop(Name). stop() -> - stop(?SVC_NAME). + stop(?DEF_SVC_NAME). diff --git a/lib/diameter/examples/code/server_cb.erl b/lib/diameter/examples/code/server_cb.erl index 9d8d395d06..071e152493 100644 --- a/lib/diameter/examples/code/server_cb.erl +++ b/lib/diameter/examples/code/server_cb.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -24,7 +24,7 @@ -module(server_cb). -include_lib("diameter/include/diameter.hrl"). --include_lib("diameter/include/diameter_gen_base_rfc3588.hrl"). +-include_lib("diameter/include/diameter_gen_base_rfc6733.hrl"). %% diameter callbacks -export([peer_up/3, diff --git a/lib/diameter/include/diameter_gen.hrl b/lib/diameter/include/diameter_gen.hrl index bc25f7d472..8272904856 100644 --- a/lib/diameter/include/diameter_gen.hrl +++ b/lib/diameter/include/diameter_gen.hrl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -25,6 +25,9 @@ -define(THROW(T), throw({?MODULE, T})). +%% Tag common to generated dictionaries. +-define(TAG, diameter_gen). + %% Key to a value in the process dictionary that determines whether or %% not an unrecognized AVP setting the M-bit should be regarded as an %% error or not. See is_strict/0. @@ -48,13 +51,20 @@ %% dictionary. putr(K,V) -> - put({?MODULE, K}, V). + put({?TAG, K}, V). getr(K) -> - get({?MODULE, K}). + case get({?TAG, K}) of + undefined -> + V = erase({?MODULE, K}), %% written in old code + V == undefined orelse putr(K,V), + V; + V -> + V + end. eraser(K) -> - erase({?MODULE, K}). + erase({?TAG, K}). %% --------------------------------------------------------------------------- %% # encode_avps/2 @@ -313,12 +323,20 @@ d(Name, Avp, Acc) -> %% decode is packed into 'AVP'. Mod = dict(Failed), %% Dictionary to decode in. + %% On decode, a Grouped AVP is represented as a #diameter_avp{} + %% list with AVP as head and component AVPs as tail. On encode, + %% data can be a list of component AVPs. + try Mod:avp(decode, Data, AvpName) of V -> {Avps, T} = Acc, {H, A} = ungroup(V, Avp), {[H | Avps], pack_avp(Name, A, T)} catch + throw: {?TAG, {grouped, RC, ComponentAvps}} -> + {Avps, {Rec, Errors}} = Acc, + A = trim(Avp), + {[[A | trim(ComponentAvps)] | Avps], {Rec, [{RC, A} | Errors]}}; error: Reason -> d(undefined == Failed orelse is_failed(), Reason, @@ -338,6 +356,10 @@ d(Name, Avp, Acc) -> trim(#diameter_avp{data = <<0:1, Bin/binary>>} = Avp) -> Avp#diameter_avp{data = Bin}; +trim(Avps) + when is_list(Avps) -> + lists:map(fun trim/1, Avps); + trim(Avp) -> Avp. @@ -582,22 +604,37 @@ value(_, Avp) -> %% # grouped_avp/3 %% --------------------------------------------------------------------------- --spec grouped_avp(decode, avp_name(), binary()) +-spec grouped_avp(decode, avp_name(), bitstring()) -> {avp_record(), [avp()]}; (encode, avp_name(), avp_record() | avp_values()) -> binary() | no_return(). +%% Length error induced by diameter_codec:collect_avps/1. +grouped_avp(decode, _Name, <<0:1, _/binary>>) -> + throw({?TAG, {grouped, 5014, []}}); + grouped_avp(decode, Name, Data) -> - {Rec, Avps, []} = decode_avps(Name, diameter_codec:collect_avps(Data)), - {Rec, Avps}; -%% A failed match here will result in 5004. Note that this is the only -%% AVP type that doesn't just return the decoded record, also -%% returning the list of component AVP's. + grouped_decode(Name, diameter_codec:collect_avps(Data)); grouped_avp(encode, Name, Data) -> encode_avps(Name, Data). +%% grouped_decode/2 +%% +%% Note that Grouped is the only AVP type that doesn't just return a +%% decoded value, also returning the list of component diameter_avp +%% records. + +grouped_decode(_Name, {Error, Acc}) -> + {RC, Avp} = Error, + throw({?TAG, {grouped, RC, [Avp | Acc]}}); + +grouped_decode(Name, ComponentAvps) -> + {Rec, Avps, Es} = decode_avps(Name, ComponentAvps), + [] == Es orelse throw({?TAG, {grouped, 5004, Avps}}), %% decode failure + {Rec, Avps}. + %% --------------------------------------------------------------------------- %% # empty_group/1 %% --------------------------------------------------------------------------- diff --git a/lib/diameter/src/base/diameter.erl b/lib/diameter/src/base/diameter.erl index d74e091e11..67dfc7bdbf 100644 --- a/lib/diameter/src/base/diameter.erl +++ b/lib/diameter/src/base/diameter.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -306,6 +306,7 @@ call(SvcName, App, Message) -> | {restrict_connections, restriction()} | {sequence, sequence() | evaluable()} | {share_peers, remotes()} + | {string_decode, boolean()} | {use_shared_peers, remotes()} | {spawn_opt, list()}. @@ -337,11 +338,14 @@ call(SvcName, App, Message) -> :: {transport_module, atom()} | {transport_config, any()} | {transport_config, any(), 'Unsigned32'() | infinity} + | {pool_size, pos_integer()} | {applications, [app_alias()]} | {capabilities, [capability()]} | {capabilities_cb, evaluable()} | {capx_timeout, 'Unsigned32'()} | {disconnect_cb, evaluable()} + | {dpr_timeout, 'Unsigned32'()} + | {dpa_timeout, 'Unsigned32'()} | {length_errors, exit | handle | discard} | {connect_timer, 'Unsigned32'()} | {watchdog_timer, 'Unsigned32'() | {module(), atom(), list()}} diff --git a/lib/diameter/src/base/diameter_capx.erl b/lib/diameter/src/base/diameter_capx.erl index 93548ecafd..7dc61f229f 100644 --- a/lib/diameter/src/base/diameter_capx.erl +++ b/lib/diameter/src/base/diameter_capx.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -50,7 +50,8 @@ -export([build_CER/2, recv_CER/3, recv_CEA/3, - make_caps/2]). + make_caps/2, + binary_caps/1]). -include_lib("diameter/include/diameter.hrl"). -include("diameter_internal.hrl"). @@ -115,7 +116,8 @@ mk_caps(Caps0, Opts) -> -define(SC(K,F), set_cap({K, Val}, {Caps, #diameter_caps{F = false} = C}) -> - {Caps#diameter_caps{F = cap(K, Val)}, C#diameter_caps{F = true}}). + {Caps#diameter_caps{F = cap(K, copy(Val))}, + C#diameter_caps{F = true}}). ?SC('Origin-Host', origin_host); ?SC('Origin-Realm', origin_realm); @@ -375,10 +377,10 @@ capx_to_caps(CEX, Dict) -> 'Firmware-Revision', 'AVP'], CEX), - #diameter_caps{origin_host = OH, - origin_realm = OR, + #diameter_caps{origin_host = copy(OH), + origin_realm = copy(OR), vendor_id = VId, - product_name = PN, + product_name = copy(PN), origin_state_id = OSI, host_ip_address = IP, supported_vendor_id = SV, @@ -389,6 +391,32 @@ capx_to_caps(CEX, Dict) -> firmware_revision = FR, avp = X}. +%% Copy binaries to avoid retaining a reference to a large binary +%% containing AVPs we aren't interested in. +copy(B) + when is_binary(B) -> + binary:copy(B); + +copy(T) -> + T. + +%% binary_caps/1 +%% +%% Encode stringish capabilities with {string_decode, false}. + +binary_caps(Caps) -> + lists:foldl(fun bcaps/2, Caps, [#diameter_caps.origin_host, + #diameter_caps.origin_realm, + #diameter_caps.product_name]). + +bcaps(N, Caps) -> + case element(N, Caps) of + undefined -> + Caps; + V -> + setelement(N, Caps, iolist_to_binary(V)) + end. + %% --------------------------------------------------------------------------- %% --------------------------------------------------------------------------- diff --git a/lib/diameter/src/base/diameter_codec.erl b/lib/diameter/src/base/diameter_codec.erl index a2b04bfd63..15a4c5e86f 100644 --- a/lib/diameter/src/base/diameter_codec.erl +++ b/lib/diameter/src/base/diameter_codec.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -22,6 +22,8 @@ -export([encode/2, decode/2, decode/3, + setopts/1, + getopt/1, collect_avps/1, decode_header/1, sequence_numbers/1, @@ -59,6 +61,50 @@ %% +-+-+-+-+-+-+-+-+-+-+-+-+- %%% --------------------------------------------------------------------------- +%%% # setopts/1 +%%% # getopt/1 +%%% --------------------------------------------------------------------------- + +%% These functions are a compromise in the same vein as the use of the +%% process dictionary in diameter_gen.hrl in generated codec modules. +%% Instead of rewriting the entire dictionary generation to pass +%% encode/decode options around, the calling process sets them by +%% calling setopts/1. At current, the only option is whether or not to +%% decode binaries as strings, which is used by diameter_types. + +setopts(Opts) + when is_list(Opts) -> + lists:foreach(fun setopt/1, Opts). + +%% Decode stringish types to string()? The default true is for +%% backwards compatibility. +setopt({string_decode = K, false = B}) -> + setopt(K, B); + +%% Regard anything but the generated RFC 3588 dictionary as modern. +%% This affects the interpretation of defaults during the decode +%% of values of type DiameterURI, this having changed from RFC 3588. +%% (So much for backwards compatibility.) +setopt({common_dictionary, diameter_gen_base_rfc3588}) -> + setopt(rfc, 3588); + +setopt(_) -> + ok. + +setopt(Key, Value) -> + put({diameter, Key}, Value). + +getopt(Key) -> + case get({diameter, Key}) of + undefined when Key == string_decode -> + true; + undefined when Key == rfc -> + 6733; + V -> + V + end. + +%%% --------------------------------------------------------------------------- %%% # encode/2 %%% --------------------------------------------------------------------------- @@ -90,7 +136,7 @@ encode(Mod, Msg) -> msg = Msg}). e(_, #diameter_packet{msg = [#diameter_header{} = Hdr | As]} = Pkt) -> - try encode_avps(As) of + try encode_avps(reorder(As)) of Avps -> Length = size(Avps) + 20, @@ -183,26 +229,50 @@ values(Avps) -> %% Message as a list of #diameter_avp{} ... encode_avps(_, _, [#diameter_avp{} | _] = Avps) -> - encode_avps(reorder(Avps, [], Avps)); + encode_avps(reorder(Avps)); %% ... or as a tuple list or record. encode_avps(Mod, MsgName, Values) -> Mod:encode_avps(MsgName, Values). %% reorder/1 +%% +%% Reorder AVPs for the relay case using the index field of +%% diameter_avp records. Decode populates this field in collect_avps +%% and presents AVPs in reverse order. A relay then sends the reversed +%% list with a Route-Record AVP prepended. The goal here is just to do +%% lists:reverse/1 in Grouped AVPs and the outer list, but only in the +%% case there are indexed AVPs at all, so as not to reverse lists that +%% have been explicilty sent (unindexed, in the desired order) as a +%% diameter_avp list. The effect is the same as lists:keysort/2, but +%% only on the cases we expect, not a general sort. + +reorder(Avps) -> + case reorder(Avps, []) of + false -> + Avps; + Sorted -> + Sorted + end. + +%% reorder/3 -reorder([#diameter_avp{index = 0} | _] = Avps, Acc, _) -> +%% In case someone has reversed the list already. (Not likely.) +reorder([#diameter_avp{index = 0} | _] = Avps, Acc) -> Avps ++ Acc; -reorder([#diameter_avp{index = N} = A | Avps], Acc, _) +%% Assume indexed AVPs are in reverse order. +reorder([#diameter_avp{index = N} = A | Avps], Acc) when is_integer(N) -> lists:reverse(Avps, [A | Acc]); -reorder([H | T], Acc, Avps) -> - reorder(T, [H | Acc], Avps); +%% An unindexed AVP. +reorder([H | T], Acc) -> + reorder(T, [H | Acc]); -reorder([], Acc, _) -> - Acc. +%% No indexed members. +reorder([], _) -> + false. %% encode_avps/1 @@ -390,6 +460,9 @@ sequence_numbers(#diameter_packet{bin = Bin}) sequence_numbers(#diameter_packet{header = #diameter_header{} = H}) -> sequence_numbers(H); +sequence_numbers(#diameter_packet{msg = [#diameter_header{} = H | _]}) -> + sequence_numbers(H); + sequence_numbers(#diameter_header{hop_by_hop_id = H, end_to_end_id = E}) -> {H,E}; @@ -561,14 +634,14 @@ split_data(Bin, Len) -> <<Data:Len/binary, _:Pad/binary, Rest/binary>> -> {Data, Rest}; _ -> - %% Header length points past the end of the message. As - %% stated in the 6733 text above, it's sufficient to - %% return a zero-filled minimal payload if this is a - %% request. Do this (in cases that we know the type) by - %% inducing a decode failure and letting the dictionary's - %% decode (in diameter_gen) deal with it. Here we don't - %% know type. If the type isn't known, then the decode - %% just strips the extra bit. + %% Header length points past the end of the message, or + %% doesn't span the header. As stated in the 6733 text + %% above, it's sufficient to return a zero-filled minimal + %% payload if this is a request. Do this (in cases that we + %% know the type) by inducing a decode failure and letting + %% the dictionary's decode (in diameter_gen) deal with it. + %% Here we don't know type. If the type isn't known, then + %% the decode just strips the extra bit. {<<0:1, Bin/binary>>, <<>>} end. @@ -582,6 +655,8 @@ split_data(Bin, Len) -> %% dictionary doesn't know about specific AVP's. %% Grouped AVP whose components need packing ... +pack_avp([#diameter_avp{} = A | Avps]) -> + pack_avp(A#diameter_avp{data = Avps}); pack_avp(#diameter_avp{data = [#diameter_avp{} | _] = Avps} = A) -> pack_avp(A#diameter_avp{data = encode_avps(Avps)}); diff --git a/lib/diameter/src/base/diameter_config.erl b/lib/diameter/src/base/diameter_config.erl index dd1c9b73bb..0d0304bf33 100644 --- a/lib/diameter/src/base/diameter_config.erl +++ b/lib/diameter/src/base/diameter_config.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -35,10 +35,11 @@ %% -module(diameter_config). --compile({no_auto_import, [monitor/2]}). - -behaviour(gen_server). +-compile({no_auto_import, [monitor/2, now/0]}). +-import(diameter_lib, [now/0]). + -export([start_service/2, stop_service/1, add_transport/2, @@ -531,7 +532,10 @@ opt({applications, As}) -> opt({capabilities, Os}) -> is_list(Os) andalso ok == encode_CER(Os); -opt({capx_timeout, Tmo}) -> +opt({K, Tmo}) + when K == capx_timeout; + K == dpr_timeout; + K == dpa_timeout -> ?IS_UINT32(Tmo); opt({length_errors, T}) -> @@ -554,6 +558,9 @@ opt({watchdog_config, L}) -> opt({spawn_opt, Opts}) -> is_list(Opts); +opt({pool_size, N}) -> + is_integer(N) andalso 0 < N; + %% Options that we can't validate. opt({K, _}) when K == transport_config; @@ -638,13 +645,23 @@ make_config(SvcName, Opts) -> {false, monitor}, {?NOMASK, sequence}, {nodes, restrict_connections}, + {true, string_decode}, {[], spawn_opt}]), + D = proplists:get_value(string_decode, SvcOpts, true), + #service{name = SvcName, rec = #diameter_service{applications = Apps, - capabilities = Caps}, + capabilities = binary_caps(Caps, D)}, options = SvcOpts}. +binary_caps(Caps, true) -> + Caps; +binary_caps(Caps, false) -> + diameter_capx:binary_caps(Caps). + +%% make_opts/2 + make_opts(Opts, Defs) -> Known = [{K, get_opt(K, Opts, D)} || {D,K} <- Defs], Unknown = Opts -- Known, @@ -663,7 +680,8 @@ opt(K, false = B) opt(K, true = B) when K == share_peers; - K == use_shared_peers -> + K == use_shared_peers; + K == string_decode -> B; opt(restrict_connections, T) diff --git a/lib/diameter/src/base/diameter_lib.erl b/lib/diameter/src/base/diameter_lib.erl index 5b3a2063f8..3f327f3653 100644 --- a/lib/diameter/src/base/diameter_lib.erl +++ b/lib/diameter/src/base/diameter_lib.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -18,12 +18,18 @@ %% -module(diameter_lib). +-compile({no_auto_import, [now/0]}). -export([info_report/2, error_report/2, warning_report/2, + now/0, + timestamp/1, now_diff/1, + micro_diff/1, + micro_diff/2, time/1, + seed/0, eval/1, eval_name/1, get_stacktrace/0, @@ -31,6 +37,8 @@ spawn_opts/2, wait/1, fold_tuple/3, + fold_n/3, + for_n/2, log/4]). %% --------------------------------------------------------------------------- @@ -90,13 +98,51 @@ fmt(T) -> end. %% --------------------------------------------------------------------------- +%% # now/0 +%% --------------------------------------------------------------------------- + +-type timestamp() :: {non_neg_integer(), 0..999999, 0..999999}. +-type now() :: integer() %% monotonic time + | timestamp(). + +-spec now() + -> now(). + +%% Use monotonic time if it exists, fall back to erlang:now() +%% otherwise. + +now() -> + try + erlang:monotonic_time() + catch + error: undef -> erlang:now() + end. + +%% --------------------------------------------------------------------------- +%% # timestamp/1 +%% --------------------------------------------------------------------------- + +-spec timestamp(NowT :: now()) + -> timestamp(). + +timestamp({_,_,_} = T) -> %% erlang:now() + T; + +timestamp(MonoT) -> %% monotonic time + MicroSecs = monotonic_to_microseconds(MonoT + erlang:time_offset()), + Secs = MicroSecs div 1000000, + {Secs div 1000000, Secs rem 1000000, MicroSecs rem 1000000}. + +monotonic_to_microseconds(MonoT) -> + erlang:convert_time_unit(MonoT, native, micro_seconds). + +%% --------------------------------------------------------------------------- %% # now_diff/1 %% --------------------------------------------------------------------------- --spec now_diff(NowT) +-spec now_diff(NowT :: now()) -> {Hours, Mins, Secs, MicroSecs} - when NowT :: {non_neg_integer(), 0..999999, 0..999999}, - Hours :: non_neg_integer(), + when Hours :: non_neg_integer(), Mins :: 0..59, Secs :: 0..59, MicroSecs :: 0..999999. @@ -104,8 +150,37 @@ fmt(T) -> %% Return timer:now_diff(now(), NowT) as an {H, M, S, MicroS} tuple %% instead of as integer microseconds. -now_diff({_,_,_} = Time) -> - time(timer:now_diff(now(), Time)). +now_diff(Time) -> + time(micro_diff(Time)). + +%% --------------------------------------------------------------------------- +%% # micro_diff/1 +%% --------------------------------------------------------------------------- + +-spec micro_diff(NowT :: now()) + -> MicroSecs + when MicroSecs :: non_neg_integer(). + +micro_diff({_,_,_} = T0) -> + timer:now_diff(erlang:now(), T0); + +micro_diff(T0) -> %% monotonic time + monotonic_to_microseconds(erlang:monotonic_time() - T0). + +%% --------------------------------------------------------------------------- +%% # micro_diff/2 +%% --------------------------------------------------------------------------- + +-spec micro_diff(T1 :: now(), T0 :: now()) + -> MicroSecs + when MicroSecs :: non_neg_integer(). + +micro_diff(T1, T0) + when is_integer(T1), is_integer(T0) -> %% monotonic time + monotonic_to_microseconds(T1 - T0); + +micro_diff(T1, T0) -> %% at least one erlang:now() + timer:now_diff(timestamp(T1), timestamp(T0)). %% --------------------------------------------------------------------------- %% # time/1 @@ -115,7 +190,7 @@ now_diff({_,_,_} = Time) -> -spec time(NowT | Diff) -> {Hours, Mins, Secs, MicroSecs} - when NowT :: {non_neg_integer(), 0..999999, 0..999999}, + when NowT :: timestamp(), Diff :: non_neg_integer(), Hours :: non_neg_integer(), Mins :: 0..59, @@ -134,6 +209,27 @@ time(Micro) -> %% elapsed time {H, M, S, Micro rem 1000000}. %% --------------------------------------------------------------------------- +%% # seed/0 +%% --------------------------------------------------------------------------- + +-spec seed() + -> {timestamp(), {integer(), integer(), integer()}}. + +%% Return an argument for random:seed/1. + +seed() -> + T = now(), + {timestamp(T), seed(T)}. + +%% seed/1 + +seed({_,_,_} = T) -> + T; + +seed(T) -> %% monotonic time + {erlang:phash2(node()), T, erlang:unique_integer()}. + +%% --------------------------------------------------------------------------- %% # eval/1 %% %% Evaluate a function in various forms. @@ -247,17 +343,19 @@ opts(HeapSize, Opts) -> %% # wait/1 %% --------------------------------------------------------------------------- --spec wait([pid()]) +-spec wait([pid() | reference()]) -> ok. wait(L) -> - down([erlang:monitor(process, P) || P <- L]). + lists:foreach(fun down/1, L). -down([]) -> - ok; -down([MRef|T]) -> - receive {'DOWN', MRef, process, _, _} -> ok end, - down(T). +down(Pid) + when is_pid(Pid) -> + down(monitor(process, Pid)); + +down(MRef) + when is_reference(MRef) -> + receive {'DOWN', MRef, process, _, _} = T -> T end. %% --------------------------------------------------------------------------- %% # fold_tuple/3 @@ -290,6 +388,35 @@ ft(Value, {Idx, T}) -> setelement(Idx, T, Value). %% --------------------------------------------------------------------------- +%% # fold_n/3 +%% --------------------------------------------------------------------------- + +-spec fold_n(F, Acc0, N) + -> term() + when F :: fun((non_neg_integer(), term()) -> term()), + Acc0 :: term(), + N :: non_neg_integer(). + +fold_n(F, Acc, N) + when is_integer(N), 0 < N -> + fold_n(F, F(N, Acc), N-1); + +fold_n(_, Acc, _) -> + Acc. + +%% --------------------------------------------------------------------------- +%% # for_n/2 +%% --------------------------------------------------------------------------- + +-spec for_n(F, N) + -> non_neg_integer() + when F :: fun((non_neg_integer()) -> term()), + N :: non_neg_integer(). + +for_n(F, N) -> + fold_n(fun(M,A) -> F(M), A+1 end, 0, N). + +%% --------------------------------------------------------------------------- %% # log/4 %% %% Called to have something to trace on for happenings of interest. diff --git a/lib/diameter/src/base/diameter_peer.erl b/lib/diameter/src/base/diameter_peer.erl index e5d4b28766..89b63c8a92 100644 --- a/lib/diameter/src/base/diameter_peer.erl +++ b/lib/diameter/src/base/diameter_peer.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -18,9 +18,11 @@ %% -module(diameter_peer). - -behaviour(gen_server). +-compile({no_auto_import, [now/0]}). +-import(diameter_lib, [now/0]). + %% Interface towards transport modules ... -export([recv/2, up/1, @@ -230,12 +232,22 @@ recv(Pid, Pkt) -> %% # send/2 %% --------------------------------------------------------------------------- -send(Pid, #diameter_packet{transport_data = undefined, - bin = Bin}) -> - send(Pid, Bin); +send(Pid, Msg) -> + ifc_send(Pid, {send, strip(Msg)}). + +%% Send only binary when possible. +strip(#diameter_packet{transport_data = undefined, + bin = Bin}) -> + Bin; + +%% Strip potentially large message terms. +strip(#diameter_packet{transport_data = T, + bin = Bin}) -> + #diameter_packet{transport_data = T, + bin = Bin}; -send(Pid, Pkt) -> - ifc_send(Pid, {send, Pkt}). +strip(Msg) -> + Msg. %% --------------------------------------------------------------------------- %% # close/1 @@ -324,7 +336,6 @@ code_change(_OldVsn, State, _Extra) -> {ok, State}. %% --------------------------------------------------------- -%% INTERNAL FUNCTIONS %% --------------------------------------------------------- %% ifc_send/2 diff --git a/lib/diameter/src/base/diameter_peer_fsm.erl b/lib/diameter/src/base/diameter_peer_fsm.erl index ee6e7dd89e..aac2685514 100644 --- a/lib/diameter/src/base/diameter_peer_fsm.erl +++ b/lib/diameter/src/base/diameter_peer_fsm.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -63,6 +63,8 @@ %% Keys in process dictionary. -define(CB_KEY, cb). %% capabilities callback -define(DPR_KEY, dpr). %% disconnect callback +-define(DPA_KEY, dpa). %% timeout for incoming DPA, or shutdown after + %% outgoing DPA -define(REF_KEY, ref). %% transport_ref() -define(Q_KEY, q). %% transport start queue -define(START_KEY, start). %% start of connected transport @@ -82,18 +84,26 @@ N == ?GOAWAY; N == goaway; N == ?BUSY; N == busy). -%% RFC 3588: +%% RFC 6733: %% %% Timeout An application-defined timer has expired while waiting %% for some event. %% --define(EVENT_TIMEOUT, 10000). + %% Default timeout for reception of CER/CEA. +-define(CAPX_TIMEOUT, 10000). -%% Default timeout for DPA in response to DPR. A bit short but the -%% timeout used to be hardcoded. (So it could be worse.) +%% Default timeout for DPA to be received in response to an outgoing +%% DPR. A bit short but the timeout used to be hardcoded. (So it could +%% be worse.) -define(DPA_TIMEOUT, 1000). +%% Default timeout for the connection to be closed by the peer +%% following an outgoing DPA in response to an incoming DPR. It's the +%% recipient of DPA that should close the connection according to the +%% RFC. +-define(DPR_TIMEOUT, 5000). + -type uint32() :: diameter:'Unsigned32'(). -record(state, @@ -107,8 +117,14 @@ transport :: pid(), %% transport process dictionary :: module(), %% common dictionary service :: #diameter_service{}, - dpr = false :: false | {uint32(), uint32()}, - %% | hop by hop and end to end identifiers + dpr = false :: false + | true %% DPR received, DPA sent + | {uint32(), uint32()} %% set in old code + | {boolean(), uint32(), uint32()}, + %% hop by hop and end to end identifiers in + %% outgoing DPR; boolean says whether or not + %% the request was sent explicitly with + %% diameter:call/4. length_errors :: exit | handle | discard}). %% There are non-3588 states possible as a consequence of 5.6.1 of the @@ -138,7 +154,8 @@ %% # start/3 %% --------------------------------------------------------------------------- --spec start(T, [Opt], {diameter:sequence(), +-spec start(T, [Opt], {[diameter:service_opt()] + | diameter:sequence(), %% from old code [node()], module(), #diameter_service{}}) @@ -177,18 +194,25 @@ init(T) -> proc_lib:init_ack({ok, self()}), gen_server:enter_loop(?MODULE, [], i(T)). -i({Ack, WPid, {M, Ref} = T, Opts, {Mask, Nodes, Dict0, Svc}}) -> +i({Ack, WPid, T, Opts, {{_,_} = Mask, Nodes, Dict0, Svc}}) -> %% from old code + i({Ack, WPid, T, Opts, {[{sequence, Mask}], Nodes, Dict0, Svc}}); + +i({Ack, WPid, {M, Ref} = T, Opts, {SvcOpts, Nodes, Dict0, Svc}}) -> erlang:monitor(process, WPid), wait(Ack, WPid), diameter_stats:reg(Ref), + diameter_codec:setopts([{common_dictionary, Dict0} | SvcOpts]), + {_,_} = Mask = proplists:get_value(sequence, SvcOpts), {[Cs,Ds], Rest} = proplists:split(Opts, [capabilities_cb, disconnect_cb]), putr(?CB_KEY, {Ref, [F || {_,F} <- Cs]}), putr(?DPR_KEY, [F || {_, F} <- Ds]), putr(?REF_KEY, Ref), putr(?SEQUENCE_KEY, Mask), putr(?RESTRICT_KEY, Nodes), + putr(?DPA_KEY, {proplists:get_value(dpr_timeout, Opts, ?DPR_TIMEOUT), + proplists:get_value(dpa_timeout, Opts, ?DPA_TIMEOUT)}), - Tmo = proplists:get_value(capx_timeout, Opts, ?EVENT_TIMEOUT), + Tmo = proplists:get_value(capx_timeout, Opts, ?CAPX_TIMEOUT), OnLengthErr = proplists:get_value(length_errors, Opts, exit), {TPid, Addrs} = start_transport(T, Rest, Svc), @@ -212,9 +236,12 @@ wait(Ref, Pid) -> Ref -> ok; {'DOWN', _, process, Pid, _} = D -> - exit({shutdown, D}) + x(D) end. +x(T) -> + exit({shutdown, T}). + start_transport(T, Opts, #diameter_service{capabilities = LCaps} = Svc) -> Addrs0 = LCaps#diameter_caps.host_ip_address, start_transport(Addrs0, {T, Opts, Svc}). @@ -226,7 +253,7 @@ start_transport(Addrs0, T) -> q_next(TPid, Addrs0, Tmo, Data), {TPid, Addrs}; {error, No} -> - exit({shutdown, {no_connection, No}}) + x({no_connection, No}) end. svc(#diameter_service{capabilities = LCaps0} = Svc, Addrs) -> @@ -333,6 +360,9 @@ eraser(Key) -> %% transition/2 +transition(T, #state{dpr = {Hid, Eid}} = S) -> %% DPR sent from old code + transition(T, S#state{dpr = {false, Hid, Eid}}); + %% Connection to peer. transition({diameter, {TPid, connected, Remote}}, #state{transport = TPid, @@ -397,9 +427,8 @@ transition({timeout, _}, _) -> ok; %% Outgoing message. -transition({send, Msg}, #state{transport = TPid}) -> - send(TPid, Msg), - ok; +transition({send, Msg}, S) -> + outgoing(Msg, S); %% Request for graceful shutdown at remove_transport, stop_service of %% application shutdown. @@ -408,7 +437,8 @@ transition({shutdown, Pid, Reason}, #state{parent = Pid, dpr = false} = S) -> transition({shutdown, Pid, _}, #state{parent = Pid}) -> ok; -%% DPA reception has timed out. +%% DPA reception has timed out, or peer has not closed the connection +%% as a result of outgoing DPA. transition(dpa_timeout, _) -> stop; @@ -516,12 +546,9 @@ encode(Rec, Dict) -> recv(#diameter_packet{header = #diameter_header{} = Hdr} = Pkt, - #state{parent = Pid, - dictionary = Dict0} + #state{dictionary = Dict0} = S) -> - Name = diameter_codec:msg_name(Dict0, Hdr), - Pid ! {recv, self(), Name, Pkt}, - rcv(Name, Pkt, S); + recv1(diameter_codec:msg_name(Dict0, Hdr), Pkt, S); recv(#diameter_packet{header = undefined, bin = Bin} @@ -532,6 +559,41 @@ recv(#diameter_packet{header = undefined, recv(Bin, S) -> recv(#diameter_packet{bin = Bin}, S). +%% recv1/3 + +%% Incoming request after outgoing DPR: discard. Don't discard DPR, so +%% both ends don't do so when sending simultaneously. +recv1(Name, + #diameter_packet{header = #diameter_header{is_request = true} = H}, + #state{dpr = {_,_,_}}) + when Name /= 'DPR' -> + invalid(false, recv_after_outgoing_dpr, H); + +%% Incoming request after incoming DPR: discard. +recv1(_, + #diameter_packet{header = #diameter_header{is_request = true} = H}, + #state{dpr = true}) -> + invalid(false, recv_after_incoming_dpr, H); + +%% DPA with identifier mismatch, or in response to a DPR initiated by +%% the service. +recv1('DPA' = N, + #diameter_packet{header = #diameter_header{hop_by_hop_id = Hid, + end_to_end_id = Eid}} + = Pkt, + #state{dpr = {X,H,E}} + = S) + when H /= Hid; + E /= Eid; + not X -> + rcv(N, Pkt, S); + +%% Any other message with a header and no length errors: send to the +%% parent. +recv1(Name, Pkt, #state{parent = Pid} = S) -> + Pid ! {recv, self(), Name, Pkt}, + rcv(Name, Pkt, S). + %% recv/3 recv(#diameter_header{length = Len} @@ -588,7 +650,7 @@ rcv(Name, _, #state{state = PS}) rcv('DPR' = N, Pkt, S) -> handle_request(N, Pkt, S); -%% DPA in response to DPR and with the expected identifiers. +%% DPA in response to DPR, with the expected identifiers. rcv('DPA' = N, #diameter_packet{header = #diameter_header{end_to_end_id = Eid, hop_by_hop_id = Hid} @@ -596,14 +658,21 @@ rcv('DPA' = N, = Pkt, #state{dictionary = Dict0, transport = TPid, - dpr = {Hid, Eid}}) -> + dpr = {X, Hid, Eid}}) -> ?LOG(recv, N), - incr(recv, H, Dict0), - incr_rc(recv, diameter_codec:decode(Dict0, Pkt), Dict0), + X orelse begin + %% Only count DPA in response to a DPR sent by the + %% service: explicit DPR is counted in the same way + %% as other explicitly sent requests. + incr(recv, H, Dict0), + incr_rc(recv, diameter_codec:decode(Dict0, Pkt), Dict0) + end, diameter_peer:close(TPid), {stop, N}; -%% Ignore anything else, an unsolicited DPA in particular. +%% Ignore anything else, an unsolicited DPA in particular. Note that +%% dpa_timeout deals with the case in which the peer sends the wrong +%% identifiers in DPA. rcv(N, #diameter_packet{header = H}, _) when N == 'CER'; N == 'CEA'; @@ -637,9 +706,61 @@ incr_error(Dir, Pkt, Dict0) -> %% Msg here could be a #diameter_packet or a binary depending on who's %% sending. In particular, the watchdog will send DWR as a binary %% while messages coming from clients will be in a #diameter_packet. + send(Pid, Msg) -> diameter_peer:send(Pid, Msg). +%% outgoing/2 + +%% Explicit DPR. +outgoing(#diameter_packet{header = #diameter_header{application_id = 0, + cmd_code = 282, + is_request = true} + = H} + = Pkt, + #state{dpr = T, + parent = Pid} + = S) -> + if T == false -> + inform_dpr(Pid), + send_dpr(true, Pkt, dpa_timeout(), S); + T == true -> + invalid(false, dpr_after_dpa, H); %% DPA sent: discard + true -> + invalid(false, dpr_after_dpr, H) %% DPR sent: discard + end; + +%% Explict CER or DWR: discard. These are sent by us. +outgoing(#diameter_packet{header = #diameter_header{application_id = 0, + cmd_code = C, + is_request = true} + = H}, + _) + when 257 == C; %% CER + 280 == C -> %% DWR + invalid(false, invalid_request, H); + +%% DPR not sent: send. +outgoing(Msg, #state{transport = TPid, dpr = false}) -> + send(TPid, Msg), + ok; + +%% Outgoing answer: send. +outgoing(#diameter_packet{header = #diameter_header{is_request = false}} + = Pkt, + #state{transport = TPid}) -> + send(TPid, Pkt), + ok; + +%% Outgoing request: discard. +outgoing(Msg, #state{dpr = {_,_,_}}) -> + invalid(false, send_after_dpr, header(Msg)). + +header(#diameter_packet{header = H}) -> + H; +header(Bin) -> %% DWR + diameter_codec:decode_header(Bin). + %% handle_request/3 %% %% Incoming CER or DPR. @@ -699,6 +820,8 @@ build_answer('CER', = Pkt, #state{dictionary = Dict0} = S) -> + diameter_codec:setopts([{string_decode, false}]), + {SupportedApps, RCaps, CEA} = recv_CER(CER, S), [RC, IS] = Dict0:'#get-'(['Result-Code', 'Inband-Security-Id'], CEA), @@ -731,7 +854,7 @@ build_answer(Type, errors = Es} = Pkt, S) -> - {RC, FailedAVP} = result_code(H, Es), + {RC, FailedAVP} = result_code(Type, H, Es), {answer(Type, RC, FailedAVP, S), post(Type, RC, Pkt, S)}. inband_security([]) -> @@ -748,8 +871,16 @@ cea(CEA, RC, Dict0) -> post('CER' = T, RC, Pkt, S) -> {T, caps(S), {RC, Pkt}}; -post('DPR' = T, _, _, #state{parent = Pid}) -> - [fun(S) -> Pid ! {T, self()}, S end]. +post('DPR', _, _, #state{parent = Pid}) -> + [fun(S) -> dpr_timer(), inform_dpr(Pid), dpr(S) end]. + +dpr(#state{dpr = false} = S) -> %% not awaiting DPA + S#state{dpr = true}; %% DPR received +dpr(S) -> %% DPR already sent or received + S. + +inform_dpr(Pid) -> + Pid ! {'DPR', self()}. %% tell watchdog to die with us rejected({capabilities_cb, _F, Reason}, T, S) -> rejected(Reason, T, S); @@ -798,6 +929,19 @@ set(['answer-message' | _] = Ans, FailedAvp) -> set([_|_] = Ans, FailedAvp) -> Ans ++ FailedAvp. +%% result_code/3 + +%% Be lenient with errors in DPR since there's no reason to be +%% otherwise. Rejecting may cause the peer to missinterpret the error +%% as meaning that the connection should not be closed, which may well +%% lead to more problems than any errors in the DPR. + +result_code('DPR', _, _) -> + {2001, []}; + +result_code('CER', H, Es) -> + result_code(H, Es). + %% result_code/2 result_code(#diameter_header{is_error = true}, _) -> @@ -886,6 +1030,8 @@ handle_CEA(#diameter_packet{header = H} = DPkt = diameter_codec:decode(Dict0, Pkt), + diameter_codec:setopts([{string_decode, false}]), + RC = result_code(incr_rc(recv, DPkt, Dict0)), {SApps, IS, RCaps} = recv_CEA(DPkt, S), @@ -1026,7 +1172,7 @@ close(Reason) -> %% dpr/2 %% -%% The RFC isn't clear on whether DPR should be send in a non-Open +%% The RFC isn't clear on whether DPR should be sent in a non-Open %% state. The Peer State Machine transitions it documents aren't %% exhaustive (no Stop in Wait-I-CEA for example) so assume it's up to %% the implementation and transition to Closed (ie. die) if we haven't @@ -1042,7 +1188,7 @@ dpr(Reason, #state{state = 'Open', Peer = {self(), Caps}, dpr(CBs, [Reason, Ref, Peer], S); -%% Connection is open, DPR already sent. +%% Connection is open, DPR already sent or received. dpr(_, #state{state = 'Open'}) -> ok; @@ -1073,10 +1219,9 @@ dpr([CB|Rest], [Reason | _] = Args, S) -> dpr([], [Reason | _], S) -> send_dpr(Reason, [], S). --record(opts, {cause, timeout = ?DPA_TIMEOUT}). +-record(opts, {cause, timeout}). -send_dpr(Reason, Opts, #state{transport = TPid, - dictionary = Dict, +send_dpr(Reason, Opts, #state{dictionary = Dict, service = #diameter_service{capabilities = Caps}} = S) -> #opts{cause = Cause, timeout = Tmo} @@ -1085,24 +1230,37 @@ send_dpr(Reason, Opts, #state{transport = TPid, transport -> ?GOAWAY; _ -> ?REBOOT end, - timeout = ?DPA_TIMEOUT}, + timeout = dpa_timeout()}, Opts), #diameter_caps{origin_host = {OH, _}, origin_realm = {OR, _}} = Caps, - #diameter_packet{header = #diameter_header{end_to_end_id = Eid, - hop_by_hop_id = Hid}} - = Pkt - = encode(['DPR', {'Origin-Host', OH}, + Pkt = encode(['DPR', {'Origin-Host', OH}, {'Origin-Realm', OR}, {'Disconnect-Cause', Cause}], Dict), - incr(send, Pkt, Dict), + send_dpr(false, Pkt, Tmo, S). + +%% send_dpr/4 + +send_dpr(X, + #diameter_packet{header = #diameter_header{end_to_end_id = Eid, + hop_by_hop_id = Hid}} + = Pkt, + Tmo, + #state{transport = TPid, + dictionary = Dict} + = S) -> + %% Only count DPR sent by the service: explicit DPR is counted in + %% the same way as other explicitly sent requests. + X orelse incr(send, Pkt, Dict), send(TPid, Pkt), dpa_timer(Tmo), ?LOG(send, 'DPR'), - S#state{dpr = {Hid, Eid}}. + S#state{dpr = {X, Hid, Eid}}. + +%% opt/2 opt({timeout, Tmo}, Rec) when ?IS_TIMEOUT(Tmo) -> @@ -1125,6 +1283,27 @@ cause(N) -> dpa_timer(Tmo) -> erlang:send_after(Tmo, self(), dpa_timeout). +dpa_timeout() -> + dpa_timeout(getr(?DPA_KEY)). + +dpa_timeout({_, Tmo}) -> + Tmo; +dpa_timeout(undefined) -> %% set in old code + ?DPA_TIMEOUT; +dpa_timeout(Tmo) -> %% ditto + Tmo. + +dpr_timer() -> + dpa_timer(dpr_timeout()). + +dpr_timeout() -> + dpr_timeout(getr(?DPA_KEY)). + +dpr_timeout({Tmo, _}) -> + Tmo; +dpr_timeout(_) -> %% set in old code + ?DPR_TIMEOUT. + %% register_everywhere/1 %% %% Register a term and ensure it's not registered elsewhere. Note that diff --git a/lib/diameter/src/base/diameter_reg.erl b/lib/diameter/src/base/diameter_reg.erl index 3197c1aee1..f785777874 100644 --- a/lib/diameter/src/base/diameter_reg.erl +++ b/lib/diameter/src/base/diameter_reg.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -22,10 +22,11 @@ %% -module(diameter_reg). --compile({no_auto_import, [monitor/2]}). - -behaviour(gen_server). +-compile({no_auto_import, [monitor/2, now/0]}). +-import(diameter_lib, [now/0]). + -export([add/1, add_new/1, del/1, diff --git a/lib/diameter/src/base/diameter_service.erl b/lib/diameter/src/base/diameter_service.erl index 76b05a2ad4..a01bcdd4e7 100644 --- a/lib/diameter/src/base/diameter_service.erl +++ b/lib/diameter/src/base/diameter_service.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -24,6 +24,9 @@ -module(diameter_service). -behaviour(gen_server). +-compile({no_auto_import, [now/0]}). +-import(diameter_lib, [now/0]). + %% towards diameter_service_sup -export([start_link/1]). @@ -127,7 +130,8 @@ :: [{sequence, diameter:sequence()} %% sequence mask | {share_peers, diameter:remotes()} %% broadcast to | {use_shared_peers, diameter:remotes()} %% use from - | {restrict_connections, diameter:restriction()}]}). + | {restrict_connections, diameter:restriction()} + | {string_decode, boolean()}]}). %% shared_peers reflects the peers broadcast from remote nodes. %% Record representing an RFC 3539 watchdog process implemented by @@ -258,16 +262,22 @@ whois(SvcName) -> %% --------------------------------------------------------------------------- -spec pick_peer(SvcName, AppOrAlias, Opts) - -> {{TPid, Caps, App}, Mask} - | false - | {error, term()} + -> {{TPid, Caps, App}, Mask, SvcOpts} + | false %% no selection + | {error, no_service} when SvcName :: diameter:service_name(), - AppOrAlias :: {alias, diameter:app_alias()} | #diameter_app{}, - Opts :: tuple(), + AppOrAlias :: #diameter_app{} + | {alias, diameter:app_alias()}, + Opts :: {fun((Dict :: module()) -> [term()]), + diameter:peer_filter(), + Xtra :: list()}, TPid :: pid(), Caps :: #diameter_caps{}, App :: #diameter_app{}, - Mask :: diameter:sequence(). + Mask :: diameter:sequence(), + SvcOpts :: [diameter:service_opt()]. +%% Extract Mask in the returned tuple so that diameter_traffic doesn't +%% need to know about the ordering of SvcOpts used here. pick_peer(SvcName, App, Opts) -> pick(lookup_state(SvcName), App, Opts). @@ -284,10 +294,10 @@ pick(#state{service = #diameter_service{applications = Apps}} Opts) -> %% initial call from diameter:call/4 pick(S, find_outgoing_app(Alias, Apps), Opts); -pick(_, false, _) -> - false; +pick(_, false = No, _) -> + No; -pick(#state{options = [{_, Mask} | _]} +pick(#state{options = [{_, Mask} | SvcOpts]} = S, #diameter_app{module = ModX, dictionary = Dict} = App0, @@ -296,7 +306,7 @@ pick(#state{options = [{_, Mask} | _]} [_,_] = RealmAndHost = diameter_lib:eval([DestF, Dict]), case pick_peer(App, RealmAndHost, Filter, S) of {TPid, Caps} -> - {{TPid, Caps, App}, Mask}; + {{TPid, Caps, App}, Mask, SvcOpts}; false = No -> No end. @@ -610,8 +620,9 @@ st(#watchdog{ref = Ref, pid = Pid}, Refs) -> %% st/3 st(#watchdog{pid = Pid}, Reason, Acc) -> + MRef = monitor(process, Pid), Pid ! {shutdown, self(), Reason}, - [Pid | Acc]. + [MRef | Acc]. %% --------------------------------------------------------------------------- %% # call_service/2 @@ -686,7 +697,8 @@ service_options(Opts) -> {restrict_connections, proplists:get_value(restrict_connections, Opts, ?RESTRICT)}, - {spawn_opt, proplists:get_value(spawn_opt, Opts, [])}]. + {spawn_opt, proplists:get_value(spawn_opt, Opts, [])}, + {string_decode, proplists:get_value(string_decode, Opts, true)}]. %% The order of options is significant since we match against the list. mref(false = No) -> @@ -765,8 +777,9 @@ reason(failure) -> start(Ref, {T, Opts}, S) when T == connect; T == listen -> + N = proplists:get_value(pool_size, Opts, 1), try - {ok, start(Ref, type(T), Opts, S)} + {ok, start(Ref, type(T), Opts, N, S)} catch ?FAILURE(Reason) -> {error, Reason} @@ -784,26 +797,44 @@ type(connect = T) -> T. %% start/4 -start(Ref, Type, Opts, #state{watchdogT = WatchdogT, - peerT = PeerT, - options = SvcOpts, - service_name = SvcName, - service = Svc0}) +start(Ref, Type, Opts, State) -> + start(Ref, Type, Opts, 1, State). + +%% start/5 + +start(Ref, Type, Opts, N, #state{watchdogT = WatchdogT, + peerT = PeerT, + options = SvcOpts, + service_name = SvcName, + service = Svc0}) when Type == connect; Type == accept -> #diameter_service{applications = Apps} - = Svc + = Svc1 = merge_service(Opts, Svc0), - {_,_} = Mask = proplists:get_value(sequence, SvcOpts), - RecvData = diameter_traffic:make_recvdata([SvcName, PeerT, Apps, Mask]), - Pid = s(Type, Ref, {{spawn_opts([Opts, SvcOpts]), RecvData}, - Opts, - SvcOpts, - Svc}), - insert(WatchdogT, #watchdog{pid = Pid, - type = Type, - ref = Ref, - options = Opts}), + Svc = binary_caps(Svc1, proplists:get_value(string_decode, SvcOpts, true)), + RecvData = diameter_traffic:make_recvdata([SvcName, + PeerT, + Apps, + SvcOpts]), + T = {{spawn_opts([Opts, SvcOpts]), RecvData}, Opts, SvcOpts, Svc}, + Rec = #watchdog{type = Type, + ref = Ref, + options = Opts}, + diameter_lib:fold_n(fun(_,A) -> + [wd(Type, Ref, T, WatchdogT, Rec) | A] + end, + [], + N). + +binary_caps(Svc, true) -> + Svc; +binary_caps(#diameter_service{capabilities = Caps} = Svc, false) -> + Svc#diameter_service{capabilities = diameter_capx:binary_caps(Caps)}. + +wd(Type, Ref, T, WatchdogT, Rec) -> + Pid = start_watchdog(Type, Ref, T), + insert(WatchdogT, Rec#watchdog{pid = Pid}), Pid. %% Note that the service record passed into the watchdog is the merged @@ -816,7 +847,7 @@ spawn_opts(Optss) -> T /= link, T /= monitor]. -s(Type, Ref, T) -> +start_watchdog(Type, Ref, T) -> {_MRef, Pid} = diameter_watchdog:start({Type, Ref}, T), Pid. @@ -837,7 +868,7 @@ ms({applications, As}, #diameter_service{applications = Apps} = S) %% The fact that all capabilities can be configured on the transports %% means that the service doesn't necessarily represent a single -%% locally implemented Diameter peer as identified by Origin-Host: a +%% locally implemented Diameter node as identified by Origin-Host: a %% transport can configure its own Origin-Host. This means that the %% service little more than a placeholder for default capabilities %% plus a list of applications that individual transports can choose @@ -1185,7 +1216,7 @@ connect_timer(Opts, Def0) -> %% continuous restarted in case of faulty config or other problems. tc(Time, Tc) -> choose(Tc > ?RESTART_TC - orelse timer:now_diff(now(), Time) > 1000*?RESTART_TC, + orelse diameter_lib:micro_diff(Time) > 1000*?RESTART_TC, Tc, ?RESTART_TC). @@ -1718,31 +1749,43 @@ info_transport(S) -> [], PeerD). -%% Only a config entry for a listening transport: use it. -transport([[{type, listen}, _] = L]) -> - L ++ [{accept, []}]; - -%% Only one config or peer entry for a connecting transport: use it. -transport([[{type, connect} | _] = L]) -> - L; +%% Single config entry. Distinguish between pool_size config or not on +%% a connecting transport for backwards compatibility: with the option +%% the form is similar to the listening case, with connections grouped +%% in a pool tuple (for lack of a better name), without as before. +transport([[{type, Type}, {options, Opts}] = L]) + when Type == listen; + Type == connect -> + L ++ [{K, []} || [{_,K}] <- [keys(Type, Opts)]]; %% Peer entries: discard config. Note that the peer entries have %% length at least 3. transport([[_,_] | L]) -> transport(L); -%% Possibly many peer entries for a listening transport. Note that all -%% have the same options by construction, which is not terribly space -%% efficient. -transport([[{type, accept}, {options, Opts} | _] | _] = Ls) -> - [{type, listen}, +%% Multiple tranports. Note that all have the same options by +%% construction, which is not terribly space efficient. +transport([[{type, Type}, {options, Opts} | _] | _] = Ls) -> + transport(keys(Type, Opts), Ls). + +%% Group transports in an accept or pool tuple ... +transport([{Type, Key}], [[{type, _}, {options, Opts} | _] | _] = Ls) -> + [{type, Type}, {options, Opts}, - {accept, [lists:nthtail(2,L) || L <- Ls]}]. + {Key, [tl(tl(L)) || L <- Ls]}]; + +%% ... or not: there can only be one. +transport([], [L]) -> + L. + +keys(connect = T, Opts) -> + [{T, pool} || lists:keymember(pool_size, 1, Opts)]; +keys(_, _) -> + [{listen, accept}]. peer_dict(#state{watchdogT = WatchdogT, peerT = PeerT}, Dict0) -> try ets:tab2list(WatchdogT) of - L -> - lists:foldl(fun(T,A) -> peer_acc(PeerT, A, T) end, Dict0, L) + L -> lists:foldl(fun(T,A) -> peer_acc(PeerT, A, T) end, Dict0, L) catch error: badarg -> Dict0 %% service has gone down end. diff --git a/lib/diameter/src/base/diameter_service_sup.erl b/lib/diameter/src/base/diameter_service_sup.erl index 153fff902f..e3177f0083 100644 --- a/lib/diameter/src/base/diameter_service_sup.erl +++ b/lib/diameter/src/base/diameter_service_sup.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -58,7 +58,7 @@ init([]) -> ChildSpec = {Mod, {Mod, start_link, []}, temporary, - 1000, + 5000, worker, [Mod]}, {ok, {Flags, [ChildSpec]}}. diff --git a/lib/diameter/src/base/diameter_session.erl b/lib/diameter/src/base/diameter_session.erl index 3b236f109a..c5ea0428b5 100644 --- a/lib/diameter/src/base/diameter_session.erl +++ b/lib/diameter/src/base/diameter_session.erl @@ -157,8 +157,8 @@ session_id(Host) -> %% --------------------------------------------------------------------------- init() -> - Now = now(), - random:seed(Now), + {Now, Seed} = diameter_lib:seed(), + random:seed(Seed), Time = time32(Now), Seq = (?INT32 band (Time bsl 20)) bor (random:uniform(1 bsl 20) - 1), ets:insert(diameter_sequence, [{origin_state_id, Time}, diff --git a/lib/diameter/src/base/diameter_stats.erl b/lib/diameter/src/base/diameter_stats.erl index 8353613d32..64ea082be0 100644 --- a/lib/diameter/src/base/diameter_stats.erl +++ b/lib/diameter/src/base/diameter_stats.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -22,9 +22,11 @@ %% -module(diameter_stats). - -behaviour(gen_server). +-compile({no_auto_import, [now/0]}). +-import(diameter_lib, [now/0]). + -export([reg/2, reg/1, incr/3, incr/1, read/1, diff --git a/lib/diameter/src/base/diameter_sup.erl b/lib/diameter/src/base/diameter_sup.erl index e5afd23dcd..4ede4086d8 100644 --- a/lib/diameter/src/base/diameter_sup.erl +++ b/lib/diameter/src/base/diameter_sup.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -64,7 +64,7 @@ spec(Mod) -> {Mod, {Mod, start_link, []}, permanent, - 1000, + infinity, supervisor, [Mod]}. diff --git a/lib/diameter/src/base/diameter_sync.erl b/lib/diameter/src/base/diameter_sync.erl index ce2db4b3a2..90eabece3d 100644 --- a/lib/diameter/src/base/diameter_sync.erl +++ b/lib/diameter/src/base/diameter_sync.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -27,6 +27,9 @@ -module(diameter_sync). -behaviour(gen_server). +-compile({no_auto_import, [now/0]}). +-import(diameter_lib, [now/0]). + -export([call/4, call/5, cast/4, cast/5, carp/1, carp/2]). diff --git a/lib/diameter/src/base/diameter_traffic.erl b/lib/diameter/src/base/diameter_traffic.erl index 3b62afca47..784f9ca08f 100644 --- a/lib/diameter/src/base/diameter_traffic.erl +++ b/lib/diameter/src/base/diameter_traffic.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2013-2014. All Rights Reserved. +%% Copyright Ericsson AB 2013-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -77,7 +77,8 @@ {peerT :: ets:tid(), service_name :: diameter:service_name(), apps :: [#diameter_app{}], - sequence :: diameter:sequence()}). + sequence :: diameter:sequence(), + codec :: list()}). %% Record stored in diameter_request for each outgoing request. -record(request, @@ -92,11 +93,16 @@ %% # make_recvdata/1 %% --------------------------------------------------------------------------- -make_recvdata([SvcName, PeerT, Apps, Mask | _]) -> +make_recvdata([SvcName, PeerT, Apps, {_,_} = Mask | _]) -> %% from old code + make_recvdata([SvcName, PeerT, Apps, [{sequence, Mask}]]); + +make_recvdata([SvcName, PeerT, Apps, SvcOpts | _]) -> + {_,_} = Mask = proplists:get_value(sequence, SvcOpts), #recvdata{service_name = SvcName, peerT = PeerT, apps = Apps, - sequence = Mask}. + sequence = Mask, + codec = [T || {K,_} = T <- SvcOpts, K == string_decode]}. %% --------------------------------------------------------------------------- %% peer_up/1 @@ -162,24 +168,28 @@ incr_error(Dir, Id, TPid) -> %% incr_rc/4 %% --------------------------------------------------------------------------- --spec incr_rc(send|recv, Pkt, TPid, Dict0) +-spec incr_rc(send|recv, Pkt, TPid, DictT) -> {Counter, non_neg_integer()} | Reason when Pkt :: #diameter_packet{}, TPid :: pid(), - Dict0 :: module(), + DictT :: module() | {module(), module(), module()}, Counter :: {'Result-Code', integer()} | {'Experimental-Result', integer(), integer()}, Reason :: atom(). -incr_rc(Dir, Pkt, TPid, Dict0) -> +incr_rc(Dir, Pkt, TPid, {Dict, _, _} = DictT) -> try - incr_result(Dir, Pkt, TPid, {Dict0, Dict0, Dict0}) + incr_result(Dir, Pkt, TPid, DictT) catch exit: {E,_} when E == no_result_code; E == invalid_error_bit -> + incr(TPid, {msg_id(Pkt#diameter_packet.header, Dict), Dir, E}), E - end. + end; + +incr_rc(Dir, Pkt, TPid, Dict0) -> + incr_rc(Dir, Pkt, TPid, {Dict0, Dict0, Dict0}). %% --------------------------------------------------------------------------- %% pending/1 @@ -266,8 +276,11 @@ recv_request(TPid, #diameter_packet{header = #diameter_header{application_id = Id}} = Pkt, Dict0, - #recvdata{peerT = PeerT, apps = Apps} + #recvdata{peerT = PeerT, + apps = Apps, + codec = Opts} = RecvData) -> + diameter_codec:setopts([{common_dictionary, Dict0} | Opts]), send_A(recv_R(diameter_service:find_incoming_app(PeerT, TPid, Id, Apps), TPid, Pkt, @@ -275,7 +288,13 @@ recv_request(TPid, RecvData), TPid, Dict0, - RecvData). + RecvData); + +recv_request(TPid, Pkt, Dict0, RecvData) -> %% from old code + recv_request(TPid, + Pkt, + Dict0, + #recvdata{} = erlang:append_element(RecvData, [])). %% recv_R/5 @@ -592,7 +611,7 @@ resend(false, Route = #diameter_avp{data = {Dict0, 'Route-Record', OH}}, Seq = diameter_session:sequence(Mask), Hdr = Hdr0#diameter_header{hop_by_hop_id = Seq}, - Msg = [Hdr, Route | Avps], + Msg = [Hdr, Route | Avps], %% reordered at encode resend(send_request(SvcName, App, Msg, Opts), Caps, Dict0, Pkt). %% The incoming request is relayed with the addition of a %% Route-Record. Note the requirement on the return from call/4 below, @@ -678,7 +697,7 @@ local(Msg, TPid, {Dict, AppDict, Dict0} = DictT, Fs, ReqPkt) -> reset(make_answer_packet(Msg, ReqPkt), Dict, Dict0), Fs), incr(send, Pkt, TPid, AppDict), - incr_result(send, Pkt, TPid, DictT), %% count outgoing + incr_rc(send, Pkt, TPid, DictT), %% count outgoing send(TPid, Pkt). %% reset/3 @@ -1221,10 +1240,9 @@ answer_rc(_, _, Sent) -> send_R(SvcName, AppOrAlias, Msg, Opts, Caller) -> case pick_peer(SvcName, AppOrAlias, Msg, Opts) of - {{_,_,_} = Transport, Mask} -> + {Transport, Mask, SvcOpts} -> + diameter_codec:setopts(SvcOpts), send_request(Transport, Mask, Msg, Opts, Caller, SvcName); - false -> - {error, no_connection}; {error, _} = No -> No end. @@ -1286,6 +1304,8 @@ send_request({TPid, Caps, App} SvcName, []). +%% send_R/7 + send_R({send, Msg}, Pkt, Transport, Opts, Caller, SvcName, Fs) -> send_R(make_request_packet(Msg, Pkt), Transport, @@ -1388,6 +1408,21 @@ make_request_packet(#diameter_packet{header = Hdr} = Pkt, make_request_packet(Msg, Pkt) -> Pkt#diameter_packet{msg = Msg}. +%% make_retransmit_packet/2 + +make_retransmit_packet(#diameter_packet{msg = [#diameter_header{} = Hdr + | Avps]} + = Pkt) -> + Pkt#diameter_packet{msg = [make_retransmit_header(Hdr) | Avps]}; + +make_retransmit_packet(#diameter_packet{header = Hdr} = Pkt) -> + Pkt#diameter_packet{header = make_retransmit_header(Hdr)}. + +%% make_retransmit_header/1 + +make_retransmit_header(Hdr) -> + Hdr#diameter_header{is_retransmitted = true}. + %% fold_record/2 fold_record(undefined, R) -> @@ -1531,7 +1566,9 @@ a(Hdr, SvcName, discard) -> %% timer value is ignored. This means that an answer could be accepted %% from a peer after timeout in the case of failover. -retransmit({{_,_,App} = Transport, _Mask}, Req, Opts, SvcName, Timeout) -> +%% retransmit/5 + +retransmit({{_,_,App} = Transport, _, _}, Req, Opts, SvcName, Timeout) -> try retransmit(Transport, Req, SvcName, Timeout) of T -> recv_A(Timeout, SvcName, App, Opts, T) catch @@ -1552,17 +1589,26 @@ pick_peer(SvcName, pick_peer(SvcName, App, Msg, Opts#options{extra = []}); pick_peer(_, _, undefined, _) -> - false; + {error, no_connection}; pick_peer(SvcName, AppOrAlias, Msg, #options{filter = Filter, extra = Xtra}) -> - diameter_service:pick_peer(SvcName, - AppOrAlias, - {fun(D) -> get_destination(D, Msg) end, - Filter, - Xtra}). + pick(diameter_service:pick_peer(SvcName, + AppOrAlias, + {fun(D) -> get_destination(D, Msg) end, + Filter, + Xtra})). + +pick({{_,_,_} = Transport, Mask}) -> %% from old code; dialyzer complains + {Transport, Mask, []}; %% about this + +pick(false) -> + {error, no_connection}; + +pick(T) -> + T. %% handle_error/4 @@ -1660,8 +1706,14 @@ recv(TPid, Pid, TRef, Ref) -> %% send/2 -send(Pid, Pkt) -> - Pid ! {send, Pkt}. +send(Pid, Pkt) -> %% Strip potentially large message terms. + #diameter_packet{header = H, + bin = Bin, + transport_data = T} + = Pkt, + Pid ! {send, #diameter_packet{header = H, + bin = Bin, + transport_data = T}}. %% retransmit/4 @@ -1674,9 +1726,7 @@ retransmit({TPid, Caps, App} have_request(Pkt0, TPid) %% Don't failover to a peer we've andalso ?THROW(timeout), %% already sent to. - #diameter_packet{header = Hdr0} = Pkt0, - Hdr = Hdr0#diameter_header{is_retransmitted = true}, - Pkt = Pkt0#diameter_packet{header = Hdr}, + Pkt = make_retransmit_packet(Pkt0), retransmit(cb(App, prepare_retransmit, [Pkt, SvcName, {TPid, Caps}]), Transport, diff --git a/lib/diameter/src/base/diameter_types.erl b/lib/diameter/src/base/diameter_types.erl index ca3338be5f..fe7613541c 100644 --- a/lib/diameter/src/base/diameter_types.erl +++ b/lib/diameter/src/base/diameter_types.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -75,7 +75,7 @@ %% message indicating this error MUST include the offending AVPs %% within a Failed-AVP AVP. %% --define(INVALID_LENGTH(Bin), erlang:error({'DIAMETER', 5014, Bin})). +-define(INVALID_LENGTH(Bitstr), erlang:error({'DIAMETER', 5014, Bitstr})). %% ------------------------------------------------------------------------- %% 3588, 4.2. Basic AVP Data Formats @@ -90,7 +90,12 @@ 'OctetString'(decode, Bin) when is_binary(Bin) -> - binary_to_list(Bin); + case diameter_codec:getopt(string_decode) of + true -> + binary_to_list(Bin); + _ -> + Bin + end; 'OctetString'(decode, B) -> ?INVALID_LENGTH(B); @@ -298,21 +303,29 @@ 'OctetString'(M, lists:duplicate(0,7)); 'DiameterURI'(encode, #diameter_uri{type = Type, - fqdn = D, - port = P, + fqdn = DN, + port = PN, transport = T, - protocol = Prot} - = U) -> - S = lists:append([atom_to_list(Type), "://", D, - ":", integer_to_list(P), + protocol = P}) + when (Type == 'aaa' orelse Type == 'aaas'), + is_integer(PN), + 0 =< PN, + (T == tcp orelse T == sctp orelse T == udp), + (P == diameter orelse P == radius orelse P == 'tacacs+'), + (P /= diameter orelse T /= udp) -> + iolist_to_binary([atom_to_list(Type), "://", DN, + ":", integer_to_list(PN), ";transport=", atom_to_list(T), - ";protocol=", atom_to_list(Prot)]), - U = scan_uri(S), %% assert - list_to_binary(S); + ";protocol=", atom_to_list(P)]); +%% Don't omit defaults since they're dependent on whether RFC 3588 or +%% 6733 is being followed. For one, we don't know this at encode; for +%% two (more importantly), we don't know how the peer will interpret +%% defaults, so it's best to be explicit. Interpret defaults on decode +%% since there's no choice. 'DiameterURI'(encode, Str) -> Bin = iolist_to_binary(Str), - #diameter_uri{} = scan_uri(Bin), %% type check + #diameter_uri{} = scan_uri(Bin), %% assert Bin. %% -------------------- @@ -321,7 +334,6 @@ 'IPFilterRule'(encode = M, zero) -> 'OctetString'(M, lists:duplicate(0,33)); -%% TODO: parse grammar. 'IPFilterRule'(M, X) -> 'OctetString'(M, X). @@ -331,7 +343,6 @@ 'QoSFilterRule'(encode = M, zero = X) -> 'IPFilterRule'(M, X); -%% TODO: parse grammar. 'QoSFilterRule'(M, X) -> 'OctetString'(M, X). @@ -339,7 +350,13 @@ 'UTF8String'(decode, Bin) when is_binary(Bin) -> - tl([0|_] = unicode:characters_to_list([0, Bin])); %% assert list return + case diameter_codec:getopt(string_decode) of + true -> + %% assert list return + tl([0|_] = unicode:characters_to_list([0, Bin])); + false -> + <<_/binary>> = unicode:characters_to_binary(Bin) + end; 'UTF8String'(decode, B) -> ?INVALID_LENGTH(B); @@ -507,55 +524,87 @@ msb(false) -> ?TIME_2036. %% %% aaa-protocol = ( "diameter" / "radius" / "tacacs+" ) -scan_uri(Bin) - when is_binary(Bin) -> - scan_uri(binary_to_list(Bin)); -scan_uri("aaa://" ++ Rest) -> - scan_fqdn(Rest, #diameter_uri{type = aaa}); -scan_uri("aaas://" ++ Rest) -> - scan_fqdn(Rest, #diameter_uri{type = aaas}). - -scan_fqdn(S, U) -> - {[_|_] = F, Rest} = lists:splitwith(fun is_fqdn/1, S), - scan_opt_port(Rest, U#diameter_uri{fqdn = F}). - -scan_opt_port(":" ++ S, U) -> - {[_|_] = P, Rest} = lists:splitwith(fun is_digit/1, S), - scan_opt_transport(Rest, U#diameter_uri{port = list_to_integer(P)}); -scan_opt_port(S, U) -> - scan_opt_transport(S, U). - -scan_opt_transport(";transport=" ++ S, U) -> - {P, Rest} = transport(S), - scan_opt_protocol(Rest, U#diameter_uri{transport = P}); -scan_opt_transport(S, U) -> - scan_opt_protocol(S, U). - -scan_opt_protocol(";protocol=" ++ S, U) -> - {P, ""} = protocol(S), - U#diameter_uri{protocol = P}; -scan_opt_protocol("", U) -> - U. - -transport("tcp" ++ S) -> - {tcp, S}; -transport("sctp" ++ S) -> - {sctp, S}; -transport("udp" ++ S) -> - {udp, S}. - -protocol("diameter" ++ S) -> - {diameter, S}; -protocol("radius" ++ S) -> - {radius, S}; -protocol("tacacs+" ++ S) -> - {'tacacs+', S}. - -is_fqdn(C) -> - is_digit(C) orelse is_alpha(C) orelse C == $. orelse C == $-. - -is_alpha(C) -> - ($a =< C andalso C =< $z) orelse ($A =< C andalso C =< $Z). - -is_digit(C) -> - $0 =< C andalso C =< $9. +%% RFC 6733, 4.3.1, changes the defaults: +%% +%% "aaa://" FQDN [ port ] [ transport ] [ protocol ] +%% +%% ; No transport security +%% +%% "aaas://" FQDN [ port ] [ transport ] [ protocol ] +%% +%% ; Transport security used +%% +%% FQDN = < Fully Qualified Domain Name > +%% +%% port = ":" 1*DIGIT +%% +%% ; One of the ports used to listen for +%% ; incoming connections. +%% ; If absent, the default Diameter port +%% ; (3868) is assumed if no transport +%% ; security is used and port 5658 when +%% ; transport security (TLS/TCP and DTLS/SCTP) +%% ; is used. +%% +%% transport = ";transport=" transport-protocol +%% +%% ; One of the transports used to listen +%% ; for incoming connections. If absent, +%% ; the default protocol is assumed to be TCP. +%% ; UDP MUST NOT be used when the aaa-protocol +%% ; field is set to diameter. +%% +%% transport-protocol = ( "tcp" / "sctp" / "udp" ) +%% +%% protocol = ";protocol=" aaa-protocol +%% +%% ; If absent, the default AAA protocol +%% ; is Diameter. +%% +%% aaa-protocol = ( "diameter" / "radius" / "tacacs+" ) + +scan_uri(Bin) -> + RE = "^(aaas?)://" + "([-a-zA-Z0-9.]+)" + "(:([0-9]+))?" + "(;transport=(tcp|sctp|udp))?" + "(;protocol=(diameter|radius|tacacs\\+))?$", + {match, [A, DN, PN, T, P]} = re:run(Bin, + RE, + [{capture, [1,2,4,6,8], binary}]), + Type = to_atom(A), + {PN0, T0} = defaults(diameter_codec:getopt(rfc), Type), + #diameter_uri{type = Type, + fqdn = from_bin(DN), + port = to_int(PN, PN0), + transport = to_atom(T, T0), + protocol = to_atom(P, diameter)}. + +%% Choose defaults based on the RFC, since 6733 has changed them. +defaults(3588, _) -> + {3868, sctp}; +defaults(6733, aaa) -> + {3868, tcp}; +defaults(6733, aaas) -> + {5658, tcp}. + +from_bin(B) -> + case diameter_codec:getopt(string_decode) of + true -> + binary_to_list(B); + false -> + B + end. + +to_int(<<>>, N) -> + N; +to_int(B, _) -> + binary_to_integer(B). + +to_atom(<<>>, A) -> + A; +to_atom(B, _) -> + to_atom(B). + +to_atom(B) -> + binary_to_atom(B, latin1). diff --git a/lib/diameter/src/base/diameter_watchdog.erl b/lib/diameter/src/base/diameter_watchdog.erl index b7f2d24941..de9c4bca33 100644 --- a/lib/diameter/src/base/diameter_watchdog.erl +++ b/lib/diameter/src/base/diameter_watchdog.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -122,15 +122,18 @@ i({Ack, T, Pid, {RecvData, = Svc}}) -> erlang:monitor(process, Pid), wait(Ack, Pid), - random:seed(now()), - putr(restart, {T, Opts, Svc}), %% save seeing it in trace - putr(dwr, dwr(Caps)), %% + {_, Seed} = diameter_lib:seed(), + random:seed(Seed), + putr(restart, {T, Opts, Svc, SvcOpts}), %% save seeing it in trace + putr(dwr, dwr(Caps)), %% {_,_} = Mask = proplists:get_value(sequence, SvcOpts), Restrict = proplists:get_value(restrict_connections, SvcOpts), Nodes = restrict_nodes(Restrict), Dict0 = common_dictionary(Apps), + diameter_codec:setopts([{common_dictionary, Dict0}, + {string_decode, false}]), #watchdog{parent = Pid, - transport = start(T, Opts, Mask, Nodes, Dict0, Svc), + transport = start(T, Opts, SvcOpts, Nodes, Dict0, Svc), tw = proplists:get_value(watchdog_timer, Opts, ?DEFAULT_TW_INIT), @@ -165,11 +168,11 @@ config({okay, N}, Rec) when ?IS_NATURAL(N) -> Rec#config{okay = N}. -%% start/5 +%% start/6 -start(T, Opts, Mask, Nodes, Dict0, Svc) -> +start(T, Opts, SvcOpts, Nodes, Dict0, Svc) -> {_MRef, Pid} - = diameter_peer_fsm:start(T, Opts, {Mask, Nodes, Dict0, Svc}), + = diameter_peer_fsm:start(T, Opts, {SvcOpts, Nodes, Dict0, Svc}), Pid. %% common_dictionary/1 @@ -319,7 +322,7 @@ code_change(_, State, _) -> %% expiry; or another watchdog is saying the same after reestablishing %% a connection previously had by this one. transition(close, #watchdog{}) -> - {{accept, _}, _, _} = getr(restart), %% assert + {accept, _} = role(), %% assert stop; %% Service is asking for the peer to be taken down gracefully. @@ -332,8 +335,9 @@ transition({shutdown = T, Pid, Reason}, #watchdog{parent = Pid, send(TPid, {T, self(), Reason}), S#watchdog{shutdown = true}; -%% Transport is telling us that DPA has been sent in response to DPR: -%% its death should lead to ours. +%% Transport is telling us that DPA has been sent in response to DPR, +%% or that DPR has been explicitly sent: transport death should lead +%% to ours. transition({'DPR', TPid}, #watchdog{transport = TPid} = S) -> S#watchdog{shutdown = true}; @@ -368,7 +372,7 @@ transition({open, TPid, Hosts, _} = Open, restrict = {_,R}, config = #config{suspect = OS}} = S) -> - case okay(getr(restart), Hosts, R) of + case okay(role(), Hosts, R) of okay -> set_watchdog(S#watchdog{status = okay, num_dwa = OS}); @@ -422,7 +426,7 @@ transition({'DOWN', _, process, TPid, _Reason} = D, = S0) -> S = S0#watchdog{pending = false, transport = undefined}, - {{M,_}, _, _} = getr(restart), + {M,_} = role(), %% Close an accepting watchdog immediately if there's no %% restriction on the number of connections to the same peer: the @@ -489,7 +493,7 @@ encode(dwa, Dict0, #diameter_packet{header = H, transport_data = TD} %% okay/3 -okay({{accept, Ref}, _, _}, Hosts, Restrict) -> +okay({accept, Ref}, Hosts, Restrict) -> T = {?MODULE, connection, Ref, Hosts}, diameter_reg:add(T), if Restrict -> @@ -500,7 +504,7 @@ okay({{accept, Ref}, _, _}, Hosts, Restrict) -> %% Register before matching so that at least one of two registering %% processes will match the other. -okay({{connect, _}, _, _}, _, _) -> +okay({connect, _}, _, _) -> okay. %% okay/2 @@ -515,6 +519,11 @@ okay(C) -> [_|_] = [send(P, close) || {_,P} <- C, self() /= P], reopen. +%% role/0 + +role() -> + element(1, getr(restart)). + %% set_watchdog/1 set_watchdog(#watchdog{tw = TwInit, @@ -549,7 +558,7 @@ send_watchdog(#watchdog{pending = false, ?LOG(send, 'DWR'), S#watchdog{pending = true}. -%% Dont' count encode errors since we don't expect any on DWR/DWA. +%% Don't count encode errors since we don't expect any on DWR/DWA. %% recv/3 @@ -571,11 +580,18 @@ rcv('DWR', Pkt, #watchdog{transport = TPid, DPkt = diameter_codec:decode(Dict0, Pkt), diameter_traffic:incr(recv, DPkt, TPid, Dict0), diameter_traffic:incr_error(recv, DPkt, TPid, Dict0), - EPkt = encode(dwa, Dict0, Pkt), + #diameter_packet{header = H, + transport_data = T, + bin = Bin} + = EPkt + = encode(dwa, Dict0, Pkt), diameter_traffic:incr(send, EPkt, TPid, Dict0), diameter_traffic:incr_rc(send, EPkt, TPid, Dict0), - send(TPid, {send, EPkt}), + %% Strip potentially large message terms. + send(TPid, {send, #diameter_packet{header = H, + transport_data = T, + bin = Bin}}), ?LOG(send, 'DWA'); rcv('DWA', Pkt, #watchdog{transport = TPid, @@ -590,9 +606,10 @@ rcv('DWA', Pkt, #watchdog{transport = TPid, rcv(N, _, _) when N == 'CER'; N == 'CEA'; - N == 'DPR'; - N == 'DPA' -> + N == 'DPR' -> false; +%% DPR can be sent explicitly with diameter:call/4. Only the +%% corresponding DPAs arrive here. rcv(_, Pkt, #watchdog{transport = TPid, dictionary = Dict0, @@ -793,26 +810,28 @@ restart(S) -> %% reconnect has won race with timeout %% state down rather then initial when receiving notification of an %% open connection. -restart({{connect, _} = T, Opts, Svc}, +restart({T, Opts, Svc}, S) -> %% put in old code + restart({T, Opts, Svc, []}, S); + +restart({{connect, _} = T, Opts, Svc, SvcOpts}, #watchdog{parent = Pid, - sequence = Mask, restrict = {R,_}, dictionary = Dict0} = S) -> send(Pid, {reconnect, self()}), Nodes = restrict_nodes(R), - S#watchdog{transport = start(T, Opts, Mask, Nodes, Dict0, Svc), + S#watchdog{transport = start(T, Opts, SvcOpts, Nodes, Dict0, Svc), restrict = {R, lists:member(node(), Nodes)}}; %% No restriction on the number of connections to the same peer: just %% die. Note that a state machine never enters state REOPEN in this %% case. -restart({{accept, _}, _, _}, #watchdog{restrict = {_, false}}) -> +restart({{accept, _}, _, _, _}, #watchdog{restrict = {_, false}}) -> stop; %% 'DOWN' was in old code: 'close' was not sent %% Otherwise hang around until told to die, either by the service or %% by another watchdog. -restart({{accept, _}, _, _}, S) -> +restart({{accept, _}, _, _, _}, S) -> S. %% Don't currently use Opts/Svc in the accept case. diff --git a/lib/diameter/src/diameter.appup.src b/lib/diameter/src/diameter.appup.src index 881d25b5fb..a54eb24031 100644 --- a/lib/diameter/src/diameter.appup.src +++ b/lib/diameter/src/diameter.appup.src @@ -2,7 +2,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -59,7 +59,32 @@ {"1.7.1", [{load_module, diameter_traffic}, %% 17.3 {load_module, diameter_watchdog}, {load_module, diameter_peer_fsm}, - {load_module, diameter_service}]} + {load_module, diameter_service}]}, + {"1.8", [{load_module, diameter_lib}, %% 17.4 + {load_module, diameter_peer}, + {load_module, diameter_reg}, + {load_module, diameter_session}, + {load_module, diameter_stats}, + {load_module, diameter_sync}, + {load_module, diameter_capx}, + {load_module, diameter_codec}, + {load_module, diameter_types}, + {load_module, diameter_traffic}, + {load_module, diameter_service}, + {load_module, diameter_peer_fsm}, + {load_module, diameter_watchdog}, + {load_module, diameter_tcp}, + {load_module, diameter_sctp}, + {load_module, diameter_config}, + {load_module, diameter}, + {load_module, diameter_gen_base_rfc6733}, + {load_module, diameter_gen_acct_rfc6733}, + {load_module, diameter_gen_base_rfc3588}, + {load_module, diameter_gen_base_accounting}, + {load_module, diameter_gen_relay}, + {update, diameter_transport_sup, supervisor}, + {update, diameter_service_sup, supervisor}, + {update, diameter_sup, supervisor}]} ], [ {"0.9", [{restart_application, diameter}]}, @@ -101,6 +126,31 @@ {"1.7.1", [{load_module, diameter_service}, {load_module, diameter_peer_fsm}, {load_module, diameter_watchdog}, - {load_module, diameter_traffic}]} + {load_module, diameter_traffic}]}, + {"1.8", [{update, diameter_sup, supervisor}, + {update, diameter_service_sup, supervisor}, + {update, diameter_transport_sup, supervisor}, + {load_module, diameter_gen_relay}, + {load_module, diameter_gen_base_accounting}, + {load_module, diameter_gen_base_rfc3588}, + {load_module, diameter_gen_acct_rfc6733}, + {load_module, diameter_gen_base_rfc6733}, + {load_module, diameter}, + {load_module, diameter_config}, + {load_module, diameter_sctp}, + {load_module, diameter_tcp}, + {load_module, diameter_watchdog}, + {load_module, diameter_peer_fsm}, + {load_module, diameter_service}, + {load_module, diameter_traffic}, + {load_module, diameter_types}, + {load_module, diameter_codec}, + {load_module, diameter_capx}, + {load_module, diameter_sync}, + {load_module, diameter_stats}, + {load_module, diameter_session}, + {load_module, diameter_reg}, + {load_module, diameter_peer}, + {load_module, diameter_lib}]} ] }. diff --git a/lib/diameter/src/modules.mk b/lib/diameter/src/modules.mk index a2a7a51892..c9dd4e683a 100644 --- a/lib/diameter/src/modules.mk +++ b/lib/diameter/src/modules.mk @@ -1,7 +1,7 @@ # %CopyrightBegin% # -# Copyright Ericsson AB 2010-2014. All Rights Reserved. +# Copyright Ericsson AB 2010-2015. All Rights Reserved. # # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in @@ -94,7 +94,7 @@ BINS = \ # Released files relative to ../examples. EXAMPLES = \ code/GNUmakefile \ - code/peer.erl \ + code/node.erl \ code/client.erl \ code/client_cb.erl \ code/server.erl \ diff --git a/lib/diameter/src/transport/diameter_sctp.erl b/lib/diameter/src/transport/diameter_sctp.erl index 32e7aaca39..2c8d6f0a14 100644 --- a/lib/diameter/src/transport/diameter_sctp.erl +++ b/lib/diameter/src/transport/diameter_sctp.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -18,9 +18,11 @@ %% -module(diameter_sctp). - -behaviour(gen_server). +-compile({no_auto_import, [now/0]}). +-import(diameter_lib, [now/0]). + %% interface -export([start/3]). @@ -37,7 +39,8 @@ code_change/3, terminate/2]). --export([info/1]). %% service_info callback +-export([listener/1,%% diameter_sync callback + info/1]). %% service_info callback -export([ports/0, ports/1]). @@ -99,22 +102,31 @@ -record(listener, {ref :: reference(), socket :: gen_sctp:sctp_socket(), - count = 0 :: uint(), + count = 0 :: uint(), %% attached transport processes tmap = ets:new(?MODULE, []) :: ets:tid(), %% {MRef, Pid|AssocId}, {AssocId, Pid} pending = {0, ets:new(?MODULE, [ordered_set])}, tref :: reference(), accept :: [match()]}). %% Field tmap is used to map an incoming message or event to the -%% relevent transport process. Field pending implements a queue of -%% transport processes to which an association has been assigned (at -%% comm_up and written into tmap) but for which diameter hasn't yet -%% spawned a transport process: a short-lived state of affairs as a -%% new transport is spawned as a consequence of a peer being taken up, -%% transport processes being spawned by the listener on demand. In -%% case diameter starts a transport before comm_up on a new -%% association, pending is set to an improper list with the spawned -%% transport as head and the queue as tail. +%% relevant transport process. Field pending implements two queues: +%% the first of transport-to-be processes to which an association has +%% been assigned (at comm_up and written into tmap) but for which +%% diameter hasn't yet spawned a transport process, a short-lived +%% state of affairs as a new transport is spawned as a consequence of +%% a peer being taken up, transport processes being spawned by the +%% listener on demand; the second of started transport processes that +%% have not yet been assigned an association. +%% +%% When diameter calls start/3, the transport process is either taken +%% from the first queue or spawned and placed in the second queue +%% until an association is established. When an association is +%% established, a controlling process is either taken from the second +%% queue or spawned and placed in the first queue. Thus, there are +%% only elements in one queue at a time, so share an ets table queue +%% and tag it with a positive length if it contains the first queue, a +%% negative length if it contains the second queue. The case -1 is +%% handled differently for backwards compatibility reasons. %% --------------------------------------------------------------------------- %% # start/3 @@ -139,9 +151,9 @@ ip(T) -> T. %% A listener spawns transports either as a consequence of this call -%% when there is not yet an association to associate with it, or at -%% comm_up on a new association in which case the call retrieves a -%% transport from the pending queue. +%% when there is not yet an association to assign it, or at comm_up on +%% a new association in which case the call retrieves a transport from +%% the pending queue. s({accept, Ref} = A, Addrs, Opts) -> {LPid, LAs} = listener(Ref, {Opts, Addrs}), try gen_server:call(LPid, {A, self()}, infinity) of @@ -226,7 +238,7 @@ i({connect, Pid, Opts, Addrs, Ref}) -> {LAs, Sock} = open(Addrs, Rest, 0), putr(?REF_KEY, Ref), proc_lib:init_ack({ok, self(), LAs}), - erlang:monitor(process, Pid), + monitor(process, Pid), #transport{parent = Pid, mode = {connect, connect(Sock, RAs, RP, [])}, socket = Sock}; @@ -236,8 +248,8 @@ i({accept, Pid, LPid, Sock, Ref}) when is_pid(Pid) -> putr(?REF_KEY, Ref), proc_lib:init_ack({ok, self()}), - erlang:monitor(process, Pid), - erlang:monitor(process, LPid), + monitor(process, Pid), + monitor(process, LPid), #transport{parent = Pid, mode = {accept, LPid}, socket = Sock}; @@ -246,7 +258,7 @@ i({accept, Pid, LPid, Sock, Ref}) i({accept, Ref, LPid, Sock, Id}) -> putr(?REF_KEY, Ref), proc_lib:init_ack({ok, self()}), - MRef = erlang:monitor(process, LPid), + MRef = monitor(process, LPid), %% Wait for a signal that the transport has been started before %% processing other messages. receive @@ -270,15 +282,23 @@ close(Sock, Id) -> %% listener/2 +%% Accepting processes can be started concurrently: ensure only one +%% listener is started. listener(LRef, T) -> + diameter_sync:call({?MODULE, listener, LRef}, + {?MODULE, listener, [{LRef, T}]}, + infinity, + infinity). + +listener({LRef, T}) -> l(diameter_reg:match({?MODULE, listener, {LRef, '_'}}), LRef, T). -%% Existing process with the listening socket ... +%% Existing listening process ... l([{{?MODULE, listener, {_, AS}}, LPid}], _, _) -> - {LAs, _Sock} = AS, - {LPid, LAs}; - -%% ... or not: start one. + {LAs, _Sock} = AS, + {LPid, LAs}; + +%% ... or not. l([], LRef, T) -> {ok, LPid, LAs} = diameter_sctp_sup:start_child({listen, LRef, T}), {LPid, LAs}. @@ -347,11 +367,17 @@ type(T) -> %% # handle_call/3 %% --------------------------------------------------------------------------- +handle_call(T, From, #listener{pending = L} = S) + when is_list(L) -> + handle_call(T, From, upgrade(S)); + handle_call({{accept, Ref}, Pid}, _, #listener{ref = Ref, - count = N} + pending = {N,Q}, + count = K} = S) -> - {TPid, NewS} = accept(Ref, Pid, S), - {reply, {ok, TPid}, NewS#listener{count = N+1}}; + TPid = accept(Ref, Pid, S), + {reply, {ok, TPid}, downgrade(S#listener{pending = {N-1,Q}, + count = K+1})}; handle_call(_, _, State) -> {reply, nok, State}. @@ -370,8 +396,46 @@ handle_cast(_, State) -> handle_info(T, #transport{} = S) -> {noreply, #transport{} = t(T,S)}; +handle_info(T, #listener{pending = L} = S) + when is_list(L) -> + handle_info(T, upgrade(S)); + handle_info(T, #listener{} = S) -> - {noreply, #listener{} = l(T,S)}. + {noreply, downgrade(#listener{} = l(T,S))}. + +%% upgrade/1 + +upgrade(#listener{pending = [TPid | {0,Q}]} = S) -> + ets:insert(Q, {TPid, now()}), + S#listener{pending = {-1,Q}}. +%% Prior to the possiblity of setting pool_size on in transport +%% configuration, a new accepting transport was only started following +%% the death of a predecessor, so that there was only at most one +%% previously started transport process waiting for an association. +%% This assumption no longer holds with pool_size > 1, in which case +%% several accepting transports are started concurrently. Deal with +%% this by placing the started transports in a new queue of transport +%% processes waiting for an association. +%% +%% Since only one of this queue and the existing queue of controlling +%% processes waiting for a transport to be started can be non-empty at +%% any given time, implement both queues in the same ets table. The +%% absolute value of the first element of the 2-tuple is the queue +%% length, the sign says which queue it is. + +%% downgrade/1 +%% +%% Revert to the pre-pool_size representation when possible, for +%% backwards compatibility in the case that the pool_size option +%% hasn't been used. + +downgrade(#listener{pending = {-1,Q}} = S) -> + TPid = ets:first(Q), + ets:delete(Q, TPid), + S#listener{pending = [TPid | {0,Q}]}; + +downgrade(S) -> + S. %% --------------------------------------------------------------------------- %% # code_change/3 @@ -436,54 +500,46 @@ l({sctp, Sock, _RA, _RP, Data} = Msg, #listener{socket = Sock} = S) -> setopts(Sock) end; -%% Transport is asking message to be sent. See send/3 for why the send -%% isn't directly from the transport. -l({send, AssocId, StreamId, Bin}, #listener{socket = Sock} = S) -> - send(Sock, AssocId, StreamId, Bin), - S; +l({'DOWN', MRef, process, TPid, _}, #listener{pending = {_,Q}} = S) -> + down(ets:member(Q, TPid), MRef, TPid, S); + +%% Timeout after the last accepting process has died. +l({timeout, TRef, close = T}, #listener{tref = TRef, + count = 0}) -> + x(T); +l({timeout, _, close}, #listener{} = S) -> + S. + +%% down/4 %% Accepting transport has died. One that's awaiting an association ... -l({'DOWN', MRef, process, TPid, _}, #listener{pending = [TPid | Q], - tmap = T, - count = N} - = S) -> +down(true, MRef, TPid, #listener{pending = {N,Q}, + tmap = T, + count = K} + = S) + when N < 0 -> + ets:delete(Q, TPid), ets:delete(T, MRef), ets:delete(T, TPid), - start_timer(S#listener{count = N-1, - pending = Q}); - -%% ... ditto and a new transport has already been started ... -l({'DOWN', _, process, _, _} = T, #listener{pending = [TPid | Q]} - = S) -> - #listener{pending = NQ} - = NewS - = l(T, S#listener{pending = Q}), - NewS#listener{pending = [TPid | NQ]}; - -%% ... or not. -l({'DOWN', MRef, process, TPid, _}, #listener{socket = Sock, - tmap = T, - count = N, - pending = {P,Q}} - = S) -> + start_timer(S#listener{count = K-1, + pending = {N+1,Q}}); + +%% ... or one that already has one. +down(B, MRef, TPid, #listener{socket = Sock, + tmap = T, + count = K, + pending = {N,Q}} + = S) -> [{MRef, Id}] = ets:lookup(T, MRef), %% Id = TPid | AssocId ets:delete(T, MRef), ets:delete(T, Id), Id == TPid orelse close(Sock, Id), - case ets:lookup(Q, TPid) of - [{TPid, _}] -> %% transport in the pending queue ... + if B -> %% Waiting for attachment in the pending queue ... ets:delete(Q, TPid), - S#listener{pending = {P-1, Q}}; - [] -> %% ... or not - start_timer(S#listener{count = N-1}) - end; - -%% Timeout after the last accepting process has died. -l({timeout, TRef, close = T}, #listener{tref = TRef, - count = 0}) -> - x(T); -l({timeout, _, close}, #listener{} = S) -> - S. + S#listener{pending = {N-1,Q}}; + true -> %% ... or already attached + start_timer(S#listener{count = K-1}) + end. %% t/2 %% @@ -582,29 +638,24 @@ accept(Opts) -> %% No pending associations: spawn a new transport. accept(Ref, Pid, #listener{socket = Sock, tmap = T, - pending = {0,_} = Q} - = S) -> + pending = {N,Q}}) + when N =< 0 -> Arg = {accept, Pid, self(), Sock, Ref}, {ok, TPid} = diameter_sctp_sup:start_child(Arg), - MRef = erlang:monitor(process, TPid), + MRef = monitor(process, TPid), ets:insert(T, [{MRef, TPid}, {TPid, MRef}]), - {TPid, S#listener{pending = [TPid | Q]}}; -%% Placing the transport in the pending field makes it available to -%% the next association. The stack starts a new accepting transport -%% only after this one brings the connection up (or dies). - -%% Accepting transport has died. This can happen if a new transport is -%% started before the DOWN has arrived. -accept(Ref, Pid, #listener{pending = [TPid | {0,_} = Q]} = S) -> - false = is_process_alive(TPid), %% assert - accept(Ref, Pid, S#listener{pending = Q}); + ets:insert(Q, {TPid, now()}), + TPid; +%% Placing the transport in the second pending table makes it +%% available to the next association. %% Pending associations: attach to the first in the queue. -accept(_, Pid, #listener{ref = Ref, pending = {N,Q}} = S) -> +accept(_, Pid, #listener{ref = Ref, + pending = {_,Q}}) -> TPid = ets:first(Q), TPid ! {Ref, Pid}, ets:delete(Q, TPid), - {TPid, S#listener{pending = {N-1, Q}}}. + TPid. %% send/2 @@ -718,34 +769,12 @@ up(#transport{parent = Pid, find(Id, Data, #listener{tmap = T} = S) -> f(ets:lookup(T, Id), Data, S). -%% New association and a transport waiting for one: use it. -f([], - {_, #sctp_assoc_change{state = comm_up, - assoc_id = Id}}, - #listener{tmap = T, - pending = [TPid | {_,_} = Q]} - = S) -> - [{TPid, MRef}] = ets:lookup(T, TPid), - ets:insert(T, [{MRef, Id}, {Id, TPid}]), - ets:delete(T, TPid), - {TPid, S#listener{pending = Q}}; - -%% New association and no transport start yet: spawn one and place it -%% in the queue. +%% New association ... f([], - {_, #sctp_assoc_change{state = comm_up, - assoc_id = Id}}, - #listener{ref = Ref, - socket = Sock, - tmap = T, - pending = {N,Q}} + {_, #sctp_assoc_change{state = comm_up, assoc_id = Id}}, + #listener{pending = {N,Q}} = S) -> - Arg = {accept, Ref, self(), Sock, Id}, - {ok, TPid} = diameter_sctp_sup:start_child(Arg), - MRef = erlang:monitor(process, TPid), - ets:insert(T, [{MRef, Id}, {Id, TPid}]), - ets:insert(Q, {TPid, now()}), - {TPid, S#listener{pending = {N+1, Q}}}; + {find(Id, S), S#listener{pending = {N+1,Q}}}; %% Known association ... f([{_, TPid}], _, S) -> @@ -755,6 +784,31 @@ f([{_, TPid}], _, S) -> f([], _, _) -> false. +%% find/2 + +%% Transport waiting for an association: use it. +find(Id, #listener{tmap = T, + pending = {N,Q}}) + when N < 0 -> + TPid = ets:first(Q), + [{TPid, MRef}] = ets:lookup(T, TPid), + ets:insert(T, [{MRef, Id}, {Id, TPid}]), + ets:delete(T, TPid), + ets:delete(Q, TPid), + TPid; + +%% No transport start yet: spawn one and queue. +find(Id, #listener{ref = Ref, + socket = Sock, + tmap = T, + pending = {_,Q}}) -> + Arg = {accept, Ref, self(), Sock, Id}, + {ok, TPid} = diameter_sctp_sup:start_child(Arg), + MRef = monitor(process, TPid), + ets:insert(T, [{MRef, Id}, {Id, TPid}]), + ets:insert(Q, {TPid, now()}), + TPid. + %% assoc_id/1 assoc_id({[#sctp_sndrcvinfo{assoc_id = Id}], _}) -> diff --git a/lib/diameter/src/transport/diameter_tcp.erl b/lib/diameter/src/transport/diameter_tcp.erl index 4d1b8bec51..0b26f429fb 100644 --- a/lib/diameter/src/transport/diameter_tcp.erl +++ b/lib/diameter/src/transport/diameter_tcp.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -37,7 +37,8 @@ code_change/3, terminate/2]). --export([info/1]). %% service_info callback +-export([listener/1,%% diameter_sync callback + info/1]). %% service_info callback -export([ports/0, ports/1]). @@ -191,7 +192,7 @@ init(T) -> i({T, Ref, Mod, Pid, Opts, Addrs}) when T == accept; T == connect -> - erlang:monitor(process, Pid), + monitor(process, Pid), %% Since accept/connect might block indefinitely, spawn a process %% that does nothing but kill us with the parent until call %% returns. @@ -218,8 +219,8 @@ i({T, Ref, Mod, Pid, Opts, Addrs}) %% A monitor process to kill the transport if the parent dies. i(#monitor{parent = Pid, transport = TPid} = S) -> proc_lib:init_ack({ok, self()}), - erlang:monitor(process, Pid), - erlang:monitor(process, TPid), + monitor(process, Pid), + monitor(process, TPid), S; %% In principle a link between the transport and killer processes %% could do the same thing: have the accepting/connecting process be @@ -235,7 +236,7 @@ i({listen, LRef, APid, {Mod, Opts, Addrs}}) -> LAddr = laddr(LAddrOpt, Mod, LSock), true = diameter_reg:add_new({?MODULE, listener, {LRef, {LAddr, LSock}}}), proc_lib:init_ack({ok, self(), {LAddr, LSock}}), - erlang:monitor(process, APid), + monitor(process, APid), start_timer(#listener{socket = LSock}). laddr([], Mod, Sock) -> @@ -336,17 +337,25 @@ accept(Opts) -> %% listener/2 +%% Accepting processes can be started concurrently: ensure only one +%% listener is started. listener(LRef, T) -> - l(diameter_reg:match({?MODULE, listener, {LRef, '_'}}), LRef, T). + diameter_sync:call({?MODULE, listener, LRef}, + {?MODULE, listener, [{LRef, T, self()}]}, + infinity, + infinity). -%% Existing process with the listening socket ... -l([{{?MODULE, listener, {_, AS}}, LPid}], _, _) -> - LPid ! {accept, self()}, +listener({LRef, T, TPid}) -> + l(diameter_reg:match({?MODULE, listener, {LRef, '_'}}), LRef, T, TPid). + +%% Existing listening process ... +l([{{?MODULE, listener, {_, AS}}, LPid}], _, _, TPid) -> + LPid ! {accept, TPid}, AS; -%% ... or not: start one. -l([], LRef, T) -> - {ok, _, AS} = diameter_tcp_sup:start_child({listen, LRef, self(), T}), +%% ... or not. +l([], LRef, T, TPid) -> + {ok, _, AS} = diameter_tcp_sup:start_child({listen, LRef, TPid, T}), AS. %% get_addr/1 @@ -502,7 +511,7 @@ m({'DOWN', _, process, Pid, _}, #monitor{parent = Pid, %% Another accept transport is attaching. l({accept, TPid}, #listener{count = N} = S) -> - erlang:monitor(process, TPid), + monitor(process, TPid), S#listener{count = N+1}; %% Accepting process has died. diff --git a/lib/diameter/src/transport/diameter_transport_sup.erl b/lib/diameter/src/transport/diameter_transport_sup.erl index 6457ab78b0..284a41a752 100644 --- a/lib/diameter/src/transport/diameter_transport_sup.erl +++ b/lib/diameter/src/transport/diameter_transport_sup.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -54,7 +54,7 @@ start_child(Name, Module) -> Spec = {Name, {Module, start_link, [Name]}, permanent, - 1000, + infinity, supervisor, [Module]}, supervisor:start_child(?MODULE, Spec). diff --git a/lib/diameter/test/diameter_app_SUITE.erl b/lib/diameter/test/diameter_app_SUITE.erl index f68a18b5c2..6975e83830 100644 --- a/lib/diameter/test/diameter_app_SUITE.erl +++ b/lib/diameter/test/diameter_app_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -187,15 +187,14 @@ xref(Config) -> xref:stop(XRef), + Rel = release(), %% otp_release-ish + %% Only care about calls from our own application. - [] = lists:filter(fun({{F,_,_},{T,_,_}}) -> + [] = lists:filter(fun({{F,_,_} = From, {_,_,_} = To}) -> lists:member(F, Mods) - andalso {F,T} /= {diameter_tcp, ssl} + andalso not ignored(From, To, Rel) end, Undefs), - %% diameter_tcp does call ssl despite the latter not being listed - %% as a dependency in the app file since ssl is only required for - %% TLS security: it's up to a client who wants TLS to start ssl. %% Ensure that only runtime or info modules call runtime modules. %% It's not strictly necessary that diameter compiler modules not @@ -214,6 +213,41 @@ xref(Config) -> [] = lists:filter(fun(M) -> not lists:member(app(M), Deps) end, RTdeps -- Mods). +ignored({FromMod,_,_}, {ToMod,_,_} = To, Rel)-> + %% diameter_tcp does call ssl despite the latter not being listed + %% as a dependency in the app file since ssl is only required for + %% TLS security: it's up to a client who wants TLS to start ssl. + %% The OTP 18 time api is also called if it exists, so that the + %% same code can be run on older releases. + {FromMod, ToMod} == {diameter_tcp, ssl} + orelse (FromMod == diameter_lib + andalso Rel < 18 + andalso lists:member(To, time_api())). + +%% New time api in OTP 18. +time_api() -> + [{erlang, F, A} || {F,A} <- [{convert_time_unit,3}, + {monotonic_time,0}, + {monotonic_time,1}, + {system_time,0}, + {system_time,1}, + {time_offset,0}, + {time_offset,1}, + {timestamp,0}, + {unique_integer,0}, + {unique_integer,1}]] + ++ [{os, system_time, 0}, + {os, system_time, 1}]. + +release() -> + Rel = erlang:system_info(otp_release), + try list_to_integer(Rel) of + N -> N + catch + error:_ -> + 0 %% aka < 17 + end. + unversion(App) -> T = lists:dropwhile(fun is_vsn_ch/1, lists:reverse(App)), lists:reverse(case T of [$-|TT] -> TT; _ -> T end). diff --git a/lib/diameter/test/diameter_capx_SUITE.erl b/lib/diameter/test/diameter_capx_SUITE.erl index deabdd720b..02501ce779 100644 --- a/lib/diameter/test/diameter_capx_SUITE.erl +++ b/lib/diameter/test/diameter_capx_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -144,8 +144,8 @@ end_per_suite(_Config) -> %% Generate a unique hostname for each testcase so that watchdogs %% don't prevent a connection from being brought up immediately. init_per_testcase(Name, Config) -> - Uniq = ["." ++ integer_to_list(N) || N <- tuple_to_list(now())], - [{host, lists:flatten([?L(Name) | Uniq])} | Config]. + [{host, ?L(Name) ++ "." ++ diameter_util:unique_string()} + | Config]. init_per_group(Name, Config) -> [{rfc, Name} | Config]. diff --git a/lib/diameter/test/diameter_codec_SUITE.erl b/lib/diameter/test/diameter_codec_SUITE.erl index cd8ca41f66..64ea90554d 100644 --- a/lib/diameter/test/diameter_codec_SUITE.erl +++ b/lib/diameter/test/diameter_codec_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -29,6 +29,9 @@ -export([suite/0, all/0, + groups/0, + init_per_group/2, + end_per_group/2, init_per_testcase/2, end_per_testcase/2]). @@ -36,9 +39,13 @@ -export([base/1, gen/1, lib/1, - unknown/1]). + unknown/1, + success/1, + grouped_error/1, + failed_error/1]). -include("diameter_ct.hrl"). +-include("diameter.hrl"). -define(L, atom_to_list). @@ -48,7 +55,19 @@ suite() -> [{timetrap, {seconds, 10}}]. all() -> - [base, gen, lib, unknown]. + [base, gen, lib, unknown, {group, recode}]. + +groups() -> + [{recode, [], [success, + grouped_error, + failed_error]}]. + +init_per_group(recode, Config) -> + ok = diameter:start(), + Config. + +end_per_group(_, _) -> + ok = diameter:stop(). init_per_testcase(gen, Config) -> [{application, ?APP, App}] = diameter_util:consult(?APP, app), @@ -98,3 +117,166 @@ compile(File) -> compile(File, Opts) -> compile:file(File, [return | Opts]). + +%% =========================================================================== + +%% Ensure a Grouped AVP is represented by a list in the avps field. +success(_) -> + Avps = [{295, <<1:32>>}, %% Termination-Cause + {284, [{280, "Proxy-Host"}, %% Proxy-Info + {33, "Proxy-State"}, %% + {295, <<2:32>>}]}], %% Termination-Cause + #diameter_packet{avps = [#diameter_avp{code = 295, + value = 1, + data = <<1:32>>}, + [#diameter_avp{code = 284}, + #diameter_avp{code = 280}, + #diameter_avp{code = 33}, + #diameter_avp{code = 295, + value = 2, + data = <<2:32>>}]], + errors = []} + = str(recode(str(Avps))). + +%% =========================================================================== + +%% Ensure a Grouped AVP is represented by a list in the avps field +%% even in the case of a decode error on a component AVP. +grouped_error(_) -> + Avps = [{295, <<1:32>>}, %% Termination-Cause + {284, [{295, <<0:32>>}, %% Proxy-Info, Termination-Cause + {280, "Proxy-Host"}, + {33, "Proxy-State"}]}], + #diameter_packet{avps = [#diameter_avp{code = 295, + value = 1, + data = <<1:32>>}, + [#diameter_avp{code = 284}, + #diameter_avp{code = 295, + value = undefined, + data = <<0:32>>}, + #diameter_avp{code = 280}, + #diameter_avp{code = 33}]], + errors = [{5004, #diameter_avp{code = 284}}]} + = str(recode(str(Avps))). + +%% =========================================================================== + +%% Ensure that a failed decode in Failed-AVP is acceptable, and that +%% the component AVPs are decoded if possible. +failed_error(_) -> + Avps = [{279, [{295, <<0:32>>}, %% Failed-AVP, Termination-Cause + {258, <<1:32>>}, %% Auth-Application-Id + {284, [{280, "Proxy-Host"}, %% Proxy-Info + {33, "Proxy-State"}, + {295, <<0:32>>}, %% Termination-Cause, invalid + {258, <<2:32>>}]}]}], %% Auth-Application-Id + #diameter_packet{avps = [[#diameter_avp{code = 279}, + #diameter_avp{code = 295, + value = undefined, + data = <<0:32>>}, + #diameter_avp{code = 258, + value = 1, + data = <<1:32>>}, + [#diameter_avp{code = 284}, + #diameter_avp{code = 280}, + #diameter_avp{code = 33}, + #diameter_avp{code = 295, + value = undefined}, + #diameter_avp{code = 258, + value = 2, + data = <<2:32>>}]]], + errors = []} + = sta(recode(sta(Avps))). + +%% =========================================================================== + +%% str/1 + +str(#diameter_packet{avps = [#diameter_avp{code = 263}, + #diameter_avp{code = 264}, + #diameter_avp{code = 296}, + #diameter_avp{code = 283}, + #diameter_avp{code = 258, + value = 0} + | T]} + = Pkt) -> + Pkt#diameter_packet{avps = T}; + +str(Avps) -> + OH = "diameter.erlang.org", + OR = "erlang.org", + DR = "example.com", + Sid = "diameter.erlang.org;123;456", + + [#diameter_header{version = 1, + cmd_code = 275, %% STR + is_request = true, + application_id = 0, + hop_by_hop_id = 17, + end_to_end_id = 42, + is_proxiable = false, + is_error = false, + is_retransmitted = false} + | avp([{263, Sid}, %% Session-Id + {264, OH}, %% Origin-Host + {296, OR}, %% Origin-Realm + {283, DR}, %% Destination-Realm + {258, <<0:32>>}] %% Auth-Application-Id + ++ Avps)]. + +%% sta/1 + +sta(#diameter_packet{avps = [#diameter_avp{code = 263}, + #diameter_avp{code = 268}, + #diameter_avp{code = 264}, + #diameter_avp{code = 296}, + #diameter_avp{code = 278, + value = 4} + | T]} + = Pkt) -> + Pkt#diameter_packet{avps = T}; + +sta(Avps) -> + OH = "diameter.erlang.org", + OR = "erlang.org", + Sid = "diameter.erlang.org;123;456", + + [#diameter_header{version = 1, + cmd_code = 275, %% STA + is_request = false, + application_id = 0, + hop_by_hop_id = 17, + end_to_end_id = 42, + is_proxiable = false, + is_error = false, + is_retransmitted = false} + | avp([{263, Sid}, %% Session-Id + {268, <<2002:32>>}, %% Result-Code + {264, OH}, %% Origin-Host + {296, OR}, %% Origin-Realm + {278, <<4:32>>}] %% Origin-State-Id + ++ Avps)]. + +avp({Code, Data}) -> + #diameter_avp{code = Code, + data = avp(Data)}; + +avp(#diameter_avp{} = A) -> + A; + +avp([{_,_} | _] = Avps) -> + lists:map(fun avp/1, Avps); + +avp(V) -> + V. + +%% recode/1 + +recode(Msg) -> + recode(Msg, diameter_gen_base_rfc6733). + +recode(#diameter_packet{} = Pkt, Dict) -> + diameter_codec:decode(Dict, diameter_codec:encode(Dict, Pkt)); + +recode(Msg, Dict) -> + recode(#diameter_packet{msg = Msg}, Dict). diff --git a/lib/diameter/test/diameter_codec_test.erl b/lib/diameter/test/diameter_codec_test.erl index 90536dcf2b..854b71ba93 100644 --- a/lib/diameter/test/diameter_codec_test.erl +++ b/lib/diameter/test/diameter_codec_test.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -229,8 +229,7 @@ v(Max, Ord, E) when Ord =< Max -> diameter_enum:to_list(E); v(Max, Ord, E) -> - {M,S,U} = now(), - random:seed(M,S,U), + random:seed(diameter_util:seed()), v(Max, Ord, E, []). v(0, _, _, Acc) -> @@ -357,8 +356,15 @@ values('DiameterURI') -> Tr <- ["" | [";transport=" ++ X || X <- ["tcp", "sctp", "udp"]]], Pr <- ["" | [";protocol=" ++ X - || X <- ["diameter","radius","tacacs+"]]]], - []}; + || X <- ["diameter","radius","tacacs+"]]], + Tr /= ";transport=udp" + orelse (Pr /= ";protocol=diameter" andalso Pr /= "")], + ["aaa://diameter.se;transport=udp;protocol=diameter", + "aaa://diameter.se;transport=udp", + "aaa://:3868", + "aaax://diameter.se", + "aaa://diameter.se;transport=tcpx", + "aaa://diameter.se;transport=tcp;protocol=diameter "]}; values(T) when T == 'IPFilterRule'; @@ -512,7 +518,7 @@ random(Mn,Mx) -> seed(undefined) -> put({?MODULE, seed}, true), - random:seed(now()); + random:seed(diameter_util:seed()); seed(true) -> ok. diff --git a/lib/diameter/test/diameter_config_SUITE.erl b/lib/diameter/test/diameter_config_SUITE.erl index ad5b3f9420..77f7aace1b 100644 --- a/lib/diameter/test/diameter_config_SUITE.erl +++ b/lib/diameter/test/diameter_config_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2013. All Rights Reserved. +%% Copyright Ericsson AB 2013-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -82,6 +82,9 @@ [false], [[node(), node()]]], [[x]]}, + {string_decode, + [[true], [false]], + [[0], [x]]}, {invalid_option, %% invalid service options are rejected [], [[x], @@ -157,6 +160,12 @@ {length_errors, [[exit], [handle], [discard]], [[x]]}, + {dpr_timeout, + [[0], [3000], [16#FFFFFFFF]], + [[infinity], [-1], [1 bsl 32], [x]]}, + {dpa_timeout, + [[0], [3000], [16#FFFFFFFF]], + [[infinity], [-1], [1 bsl 32], [x]]}, {connect_timer, [[3000]], [[infinity]]}, @@ -171,6 +180,9 @@ [[{suspect, 2}]]], [[x], [[{open, 0}]]]}, + {pool_size, + [[1], [100]], + [[0], [infinity], [-1], [x]]}, {private, [[x]], []}, diff --git a/lib/diameter/test/diameter_ct.erl b/lib/diameter/test/diameter_ct.erl index ed2f884681..85c502ea7f 100644 --- a/lib/diameter/test/diameter_ct.erl +++ b/lib/diameter/test/diameter_ct.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -43,7 +43,7 @@ ct_run(Opts) -> info(Start , info()). info() -> - [{time, now()}, + [{time, diameter_lib:now()}, {process_count, erlang:system_info(process_count)} | erlang:memory()]. @@ -56,6 +56,6 @@ info(L0, L1) -> io:format("INFO: ~p~n", [Diff]). diff(time, T0, T1) -> - timer:now_diff(T1, T0); + diameter_lib:micro_diff(T1, T0); diff(_, N0, N1) -> N1 - N0. diff --git a/lib/diameter/test/diameter_dpr_SUITE.erl b/lib/diameter/test/diameter_dpr_SUITE.erl index f3f16b06e0..81178e2bda 100644 --- a/lib/diameter/test/diameter_dpr_SUITE.erl +++ b/lib/diameter/test/diameter_dpr_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2012-2014. All Rights Reserved. +%% Copyright Ericsson AB 2012-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -32,6 +32,7 @@ %% testcases -export([start/1, connect/1, + send_dpr/1, remove_transport/1, stop_service/1, check/1, @@ -41,6 +42,7 @@ -export([disconnect/5]). -include("diameter.hrl"). +-include("diameter_gen_base_rfc6733.hrl"). %% =========================================================================== @@ -51,9 +53,6 @@ -define(CLIENT, "CLIENT"). -define(SERVER, "SERVER"). --define(DICT_COMMON, ?DIAMETER_DICT_COMMON). --define(APP_ID, ?DICT_COMMON:id()). - %% Config for diameter:start_service/2. -define(SERVICE(Host), [{'Origin-Host', Host}, @@ -61,9 +60,10 @@ {'Host-IP-Address', [?ADDR]}, {'Vendor-Id', hd(Host)}, %% match this in disconnect/5 {'Product-Name', "OTP/diameter"}, - {'Acct-Application-Id', [?APP_ID]}, + {'Acct-Application-Id', [0]}, {restrict_connections, false}, - {application, [{dictionary, ?DICT_COMMON}, + {application, [{dictionary, diameter_gen_base_rfc6733}, + {alias, common}, {module, #diameter_callback{_ = false}}]}]). %% Disconnect reasons that diameter passes as the first argument of a @@ -74,10 +74,12 @@ -define(CAUSES, [0, rebooting, 1, busy, 2, goaway]). %% Establish one client connection for each element of this list, -%% configured with disconnect/5 as disconnect_cb and returning the -%% specified value. +%% configured with disconnect/5, disconnect_cb returning the specified +%% value. -define(RETURNS, - [[close, {dpr, [{cause, invalid}]}], [ignore, close], []] + [[close, {dpr, [{cause, invalid}]}], + [ignore, close], + []] ++ [[{dpr, [{timeout, 5000}, {cause, T}]}] || T <- ?CAUSES]). %% =========================================================================== @@ -86,7 +88,7 @@ suite() -> [{timetrap, {seconds, 60}}]. all() -> - [{group, R} || R <- ?REASONS]. + [start, send_dpr, stop | [{group, R} || R <- ?REASONS]]. %% The group determines how transports are terminated: by remove_transport, %% stop_service or application stop. @@ -111,6 +113,22 @@ start(_Config) -> ok = diameter:start_service(?SERVER, ?SERVICE(?SERVER)), ok = diameter:start_service(?CLIENT, ?SERVICE(?CLIENT)). +send_dpr(_Config) -> + LRef = ?util:listen(?SERVER, tcp), + Ref = ?util:connect(?CLIENT, tcp, LRef, [{dpa_timeout, 10000}]), + #diameter_base_DPA{'Result-Code' = 2001} + = diameter:call(?CLIENT, + common, + ['DPR', {'Origin-Host', "CLIENT.erlang.org"}, + {'Origin-Realm', "erlang.org"}, + {'Disconnect-Cause', 0}]), + ok = receive %% endure the transport dies on DPA + #diameter_event{service = ?CLIENT, info = {down, Ref, _, _}} -> + ok + after 5000 -> + erlang:process_info(self(), messages) + end. + connect(Config) -> Pid = spawn(fun init/0), %% process for disconnect_cb to bang Grp = group(Config), diff --git a/lib/diameter/test/diameter_event_SUITE.erl b/lib/diameter/test/diameter_event_SUITE.erl index f43f111d20..bfe160203c 100644 --- a/lib/diameter/test/diameter_event_SUITE.erl +++ b/lib/diameter/test/diameter_event_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2013. All Rights Reserved. +%% Copyright Ericsson AB 2013-15. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -168,16 +168,15 @@ connect(Config, Opts) -> {Name, Ref}. uniq() -> - {MS,S,US} = now(), - lists:flatten(io_lib:format("-~p-~p-~p-", [MS,S,US])). + "-" ++ diameter_util:unique_string(). event(Name) -> receive #diameter_event{service = Name, info = T} -> T end. event(Name, TL, TH) -> - T0 = now(), + T0 = diameter_lib:now(), Event = event(Name), - DT = timer:now_diff(now(), T0) div 1000, + DT = diameter_lib:micro_diff(T0) div 1000, {true, true, DT, Event} = {TL < DT, DT < TH, DT, Event}, Event. diff --git a/lib/diameter/test/diameter_examples_SUITE.erl b/lib/diameter/test/diameter_examples_SUITE.erl index aef4bc35ef..ef8e459175 100644 --- a/lib/diameter/test/diameter_examples_SUITE.erl +++ b/lib/diameter/test/diameter_examples_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2013-2014. All Rights Reserved. +%% Copyright Ericsson AB 2013-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -295,15 +295,15 @@ slave() -> [{timetrap, {minutes, 10}}]. slave(_) -> - T0 = now(), + T0 = diameter_lib:now(), {ok, Node} = ct_slave:start(?MODULE, ?TIMEOUTS), - T1 = now(), + T1 = diameter_lib:now(), T2 = rpc:call(Node, erlang, now, []), {ok, Node} = ct_slave:stop(?MODULE), - now_diff([T0, T1, T2, now()]). + now_diff([T0, T1, T2, diameter_lib:now()]). now_diff([T1,T2|_] = Ts) -> - [timer:now_diff(T2,T1) | now_diff(tl(Ts))]; + [diameter_lib:micro_diff(T2,T1) | now_diff(tl(Ts))]; now_diff(_) -> []. @@ -397,4 +397,4 @@ stop(Name) stop(Config) -> Prot = proplists:get_value(group, Config), - [] = [RC || N <- ?NODES, RC <- [stop(concat(Prot, N))], RC /= ok]. + [] = [RC || N <- ?NODES, RC <- [catch stop(concat(Prot, N))], RC /= ok]. diff --git a/lib/diameter/test/diameter_gen_sctp_SUITE.erl b/lib/diameter/test/diameter_gen_sctp_SUITE.erl index 51ccb1e6ec..4ea5e80095 100644 --- a/lib/diameter/test/diameter_gen_sctp_SUITE.erl +++ b/lib/diameter/test/diameter_gen_sctp_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -119,10 +119,10 @@ send_not_from_controlling_process(_) -> send_not_from_controlling_process() -> FPid = self(), - {L, MRef} = spawn_monitor(fun() -> listen(FPid) end),%% listening process + {L, MRef} = spawn_monitor(fun() -> listen(FPid) end), receive {?MODULE, C, S} -> - erlang:demonitor(MRef, [flush]), + demonitor(MRef, [flush]), [L,C,S]; {'DOWN', MRef, process, _, _} = T -> error(T) @@ -137,13 +137,7 @@ listen(FPid) -> LPid = self(), spawn(fun() -> connect1(PortNr, FPid, LPid) end), %% connecting process Id = assoc(Sock), - ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], _Bin}) - = recv(). %% Waits with this as current_function. - -%% recv/0 - -recv() -> - receive T -> T end. + recv(Sock, Id). %% connect1/3 @@ -154,7 +148,7 @@ connect1(PortNr, FPid, LPid) -> FPid ! {?MODULE, self(), spawn(fun() -> send(Sock, Id) end)}, %% sending process - MRef = erlang:monitor(process, LPid), + MRef = monitor(process, LPid), down(MRef). %% Waits with this as current_function. %% down/1 @@ -277,7 +271,8 @@ acc(N, Acc) -> loop(Sock, MRef, Bin) -> receive - ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], B}) -> + ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], B}) + when is_binary(B) -> Sz = size(Bin), {Sz, Bin} = {size(B), B}, %% assert ok = send(Sock, Id, mark(Bin)), @@ -291,7 +286,7 @@ loop(Sock, MRef, Bin) -> %% connect2/3 connect2(Pid, PortNr, Bin) -> - erlang:monitor(process, Pid), + monitor(process, Pid), {ok, Sock} = open(), ok = gen_sctp:connect_init(Sock, ?ADDR, PortNr, []), @@ -301,19 +296,25 @@ connect2(Pid, PortNr, Bin) -> %% T2 = time after listening process received our message %% T3 = time after reply is received - T1 = now(), + T1 = diameter_util:timestamp(), ok = send(Sock, Id, Bin), T2 = unmark(recv(Sock, Id)), - T3 = now(), - {timer:now_diff(T2, T1), timer:now_diff(T3, T2)}. %% {Outbound, Inbound} + T3 = diameter_util:timestamp(), + {diameter_lib:micro_diff(T2, T1), %% Outbound + diameter_lib:micro_diff(T3, T2)}. %% Inbound %% recv/2 recv(Sock, Id) -> receive - ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], Bin}) -> + ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = I}], Bin}) + when is_binary(Bin) -> + Id = I, %% assert Bin; - T -> %% eg. 'DOWN' + ?SCTP(S, _) -> + Sock = S, %% assert + recv(Sock, Id); + T -> exit(T) end. @@ -325,7 +326,7 @@ send(Sock, Id, Bin) -> %% mark/1 mark(Bin) -> - Info = term_to_binary(now()), + Info = term_to_binary(diameter_util:timestamp()), <<Info/binary, Bin/binary>>. %% unmark/1 diff --git a/lib/diameter/test/diameter_gen_tcp_SUITE.erl b/lib/diameter/test/diameter_gen_tcp_SUITE.erl index 7e232edb44..4b542e0156 100644 --- a/lib/diameter/test/diameter_gen_tcp_SUITE.erl +++ b/lib/diameter/test/diameter_gen_tcp_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2013. All Rights Reserved. +%% Copyright Ericsson AB 2014-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -18,10 +18,10 @@ %% %% -%% Some gen_sctp-specific tests demonstrating problems that were +%% Some gen_tcp-specific tests demonstrating problems that were %% encountered during diameter development but have nothing -%% specifically to do with diameter. At least one of them can cause -%% diameter_traffic_SUITE testcases to fail. +%% specifically to do with diameter. These can cause testcases in +%% other suites to fail. %% -module(diameter_gen_tcp_SUITE). @@ -30,7 +30,8 @@ all/0]). %% testcases --export([send_long/1]). +-export([send_long/1, + connect/1]). -define(LOOPBACK, {127,0,0,1}). -define(GEN_OPTS, [binary, {active, true}, {ip, ?LOOPBACK}]). @@ -41,7 +42,8 @@ suite() -> [{timetrap, {minutes, 2}}]. all() -> - [send_long]. + [connect, %% Appears to fail only when run first. + send_long]. %% =========================================================================== @@ -87,15 +89,6 @@ connect(PortNr, LPid) -> LPid ! {self(), fun(B) -> send(Sock, B) end}, down(LPid). -%% down/1 - -down(Pid) - when is_pid(Pid) -> - down(erlang:monitor(process, Pid)); - -down(MRef) -> - receive {'DOWN', MRef, process, _, Reason} -> Reason end. - %% send/2 %% %% Send from a spawned process just to avoid sending from the @@ -104,3 +97,47 @@ down(MRef) -> send(Sock, Bin) -> {_, MRef} = spawn_monitor(fun() -> exit(gen_tcp:send(Sock, Bin)) end), down(MRef). + +%% =========================================================================== + +%% connect/1 +%% +%% Test that simultaneous connections succeed. This fails sporadically +%% on OS X at the time of writing, when gen_tcp:connect/2 returns +%% {error, econnreset}. + +connect(_) -> + {ok, LSock} = gen_tcp:listen(0, ?GEN_OPTS), + {ok, {_,PortNr}} = inet:sockname(LSock), + Count = lists:seq(1,8), %% 8 simultaneous connects + As = [gen_accept(LSock) || _ <- Count], + %% Wait for spawned processes to have called gen_tcp:accept/1 + %% (presumably). + receive after 2000 -> ok end, + Cs = [gen_connect(PortNr) || _ <- Count], + [] = failures(Cs), + [] = failures(As). + +failures(Monitors) -> + [RC || {_, MRef} <- Monitors, RC <- [down(MRef)], ok /= element(1, RC)]. + +gen_accept(LSock) -> + spawn_monitor(fun() -> + exit(gen_tcp:accept(LSock)) + end). + +gen_connect(PortNr) -> + spawn_monitor(fun() -> + exit(gen_tcp:connect(?LOOPBACK, PortNr, ?GEN_OPTS)) + end). + +%% =========================================================================== + +%% down/1 + +down(Pid) + when is_pid(Pid) -> + down(monitor(process, Pid)); + +down(MRef) -> + receive {'DOWN', MRef, process, _, Reason} -> Reason end. diff --git a/lib/diameter/test/diameter_pool_SUITE.erl b/lib/diameter/test/diameter_pool_SUITE.erl new file mode 100644 index 0000000000..a59cd66a2e --- /dev/null +++ b/lib/diameter/test/diameter_pool_SUITE.erl @@ -0,0 +1,133 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2015. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%% +%% Test of the pool_size option in connecting nodes with multiple +%% connections. +%% + +-module(diameter_pool_SUITE). + +-export([suite/0, + all/0, + init_per_testcase/2, + end_per_testcase/2, + init_per_suite/1, + end_per_suite/1]). + +%% testcases +-export([tcp_connect/1, + sctp_connect/1, + any_connect/1]). + +%% =========================================================================== + +-define(util, diameter_util). + +%% Config for diameter:start_service/2. +-define(SERVICE(Host), + [{'Origin-Host', Host ++ ".ericsson.com"}, + {'Origin-Realm', "ericsson.com"}, + {'Host-IP-Address', [{127,0,0,1}]}, + {'Vendor-Id', 12345}, + {'Product-Name', "OTP/diameter"}, + {'Auth-Application-Id', [0]}, %% common + {'Acct-Application-Id', [3]}, %% accounting + {restrict_connections, false}, + {application, [{alias, common}, + {dictionary, diameter_gen_base_rfc6733}, + {module, diameter_callback}]}, + {application, [{alias, accounting}, + {dictionary, diameter_gen_acct_rfc6733}, + {module, diameter_callback}]}]). + +%% =========================================================================== + +suite() -> + [{timetrap, {seconds, 30}}]. + +all() -> + [tcp_connect, + sctp_connect, + any_connect]. + +init_per_testcase(_Name, Config) -> + Config. + +end_per_testcase(_Name, _Config) -> + diameter:stop(). + +init_per_suite(Config) -> + [{sctp, ?util:have_sctp()} | Config]. + +end_per_suite(_Config) -> + ok. + +%% =========================================================================== + +tcp_connect(_Config) -> + connect(tcp, tcp). + +sctp_connect(Config) -> + case lists:member({sctp, true}, Config) of + true -> connect(sctp, sctp); + false -> {skip, no_sctp} + end. + +any_connect(_Config) -> + connect(any, tcp). + +%% connect/2 + +%% Establish multiple connections between a client and server. +connect(ClientProt, ServerProt) -> + ok = diameter:start(), + [] = [{S,T} || S <- ["server", "client"], + T <- [diameter:start_service(S, ?SERVICE(S))], + T /= ok], + %% Listen with a single transport with pool_size = 4. Ensure the + %% expected number of transport processes are started. + LRef = ?util:listen("server", ServerProt, [{pool_size, 4}]), + {4,0} = count("server", LRef, accept), %% 4 transports, no connections + %% Establish 5 connections. + Ref = ?util:connect("client", ClientProt, LRef, [{pool_size, 5}]), + {5,5} = count("client", Ref, pool), %% 5 connections + %% Ensure the server has started replacement transports within a + %% reasonable time. Sleepsince there's no guarantee the + %% replacements have been started before the client has received + %% 'up' events. (Although it's likely.) + sleep(), + {9,5} = count("server", LRef, accept), %% 5 connections + 4 accepting + %% Ensure ther are still the expected number of accepting transports + %% after stopping the client service. + ok = diameter:stop_service("client"), + sleep(), + {4,0} = count("server", LRef, accept), %% 4 transports, no connections + %% Done. + ok = diameter:stop_service("server"). + +count(Name, Ref, Key) -> + [{transport, [[{ref, Ref} | T]]}, + {connections, Cs}] + = diameter:service_info(Name, [transport, connections]), + {Key, Ps} = lists:keyfind(Key, 1, T), + {length(Ps), length(Cs)}. %% number of processes, connections + +sleep() -> + receive after 1000 -> ok end. diff --git a/lib/diameter/test/diameter_traffic_SUITE.erl b/lib/diameter/test/diameter_traffic_SUITE.erl index 4b67372016..10c58ab6e7 100644 --- a/lib/diameter/test/diameter_traffic_SUITE.erl +++ b/lib/diameter/test/diameter_traffic_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2014. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -122,8 +122,6 @@ -define(ADDR, {127,0,0,1}). --define(CLIENT, "CLIENT"). --define(SERVER, "SERVER"). -define(REALM, "erlang.org"). -define(HOST(Host, Realm), Host ++ [$.|Realm]). @@ -141,11 +139,19 @@ %% Which common dictionary to use in the clients. -define(RFCS, [rfc3588, rfc6733]). +%% Whether to decode stringish Diameter types to strings, or leave +%% them as binary. +-define(STRING_DECODES, [true, false]). + -record(group, - {client_encoding, + {client_service, + client_encoding, client_dict0, + client_strings, + server_service, server_encoding, - server_container}). + server_container, + server_strings}). %% Not really what we should be setting unless the message is sent in %% the common application but diameter doesn't care. @@ -166,7 +172,7 @@ ?answer_message(_, ResultCode)). %% Config for diameter:start_service/2. --define(SERVICE(Name), +-define(SERVICE(Name, Decode), [{'Origin-Host', Name ++ "." ++ ?REALM}, {'Origin-Realm', ?REALM}, {'Host-IP-Address', [?ADDR]}, @@ -175,6 +181,7 @@ {'Auth-Application-Id', [?DIAMETER_APP_ID_COMMON]}, {'Acct-Application-Id', [?DIAMETER_APP_ID_ACCOUNTING]}, {restrict_connections, false}, + {string_decode, Decode}, {spawn_opt, [{min_heap_size, 5000}]} | [{application, [{dictionary, D}, {module, ?MODULE}, @@ -227,28 +234,53 @@ suite() -> [{timetrap, {seconds, 60}}]. all() -> - [start, start_services, add_transports, result_codes] - ++ [{group, ?util:name([R,D,A,C]), P} || R <- ?ENCODINGS, - D <- ?RFCS, - A <- ?ENCODINGS, - C <- ?CONTAINERS, - P <- [[], [parallel]]] - ++ [outstanding, remove_transports, empty, stop_services, stop]. + [start, result_codes, {group, traffic}, outstanding, empty, stop]. groups() -> Ts = tc(), - [{?util:name([R,D,A,C]), [], Ts} || R <- ?ENCODINGS, - D <- ?RFCS, - A <- ?ENCODINGS, - C <- ?CONTAINERS]. + [{?util:name([R,D,A,C]), [parallel], Ts} || R <- ?ENCODINGS, + D <- ?RFCS, + A <- ?ENCODINGS, + C <- ?CONTAINERS] + ++ + [{?util:name([R,D,A,C,SD,CD]), + [], + [start_services, + add_transports, + result_codes, + {group, ?util:name([R,D,A,C])}, + remove_transports, + stop_services]} + || R <- ?ENCODINGS, + D <- ?RFCS, + A <- ?ENCODINGS, + C <- ?CONTAINERS, + SD <- ?STRING_DECODES, + CD <- ?STRING_DECODES] + ++ + [{traffic, [parallel], [{group, ?util:name([R,D,A,C,SD,CD])} + || R <- ?ENCODINGS, + D <- ?RFCS, + A <- ?ENCODINGS, + C <- ?CONTAINERS, + SD <- ?STRING_DECODES, + CD <- ?STRING_DECODES]}]. init_per_group(Name, Config) -> - [R,D,A,C] = ?util:name(Name), - G = #group{client_encoding = R, - client_dict0 = dict0(D), - server_encoding = A, - server_container = C}, - [{group, G} | Config]. + case ?util:name(Name) of + [R,D,A,C,SD,CD] -> + G = #group{client_service = [$C|?util:unique_string()], + client_encoding = R, + client_dict0 = dict0(D), + client_strings = CD, + server_service = [$S|?util:unique_string()], + server_encoding = A, + server_container = C, + server_strings = SD}, + [{group, G} | Config]; + _ -> + Config + end. end_per_group(_, _) -> ok. @@ -319,18 +351,26 @@ tc() -> start(_Config) -> ok = diameter:start(). -start_services(_Config) -> - ok = diameter:start_service(?SERVER, ?SERVICE(?SERVER)), - ok = diameter:start_service(?CLIENT, [{sequence, ?CLIENT_MASK} - | ?SERVICE(?CLIENT)]). +start_services(Config) -> + #group{client_service = CN, + client_strings = CD, + server_service = SN, + server_strings = SD} + = group(Config), + ok = diameter:start_service(SN, ?SERVICE(SN, SD)), + ok = diameter:start_service(CN, [{sequence, ?CLIENT_MASK} + | ?SERVICE(CN, CD)]). add_transports(Config) -> - LRef = ?util:listen(?SERVER, + #group{client_service = CN, + server_service = SN} + = group(Config), + LRef = ?util:listen(SN, tcp, [{capabilities_cb, fun capx/2}, {spawn_opt, [{min_heap_size, 8096}]}, {applications, apps(rfc3588)}]), - Cs = [?util:connect(?CLIENT, + Cs = [?util:connect(CN, tcp, LRef, [{id, Id}, @@ -354,12 +394,18 @@ outstanding(_Config) -> is_atom(element(1,T))]. remove_transports(Config) -> + #group{client_service = CN, + server_service = SN} + = group(Config), [LRef | Cs] = ?util:read_priv(Config, "transport"), - [?util:disconnect(?CLIENT, C, ?SERVER, LRef) || C <- Cs]. + [?util:disconnect(CN, C, SN, LRef) || C <- Cs]. -stop_services(_Config) -> - ok = diameter:stop_service(?CLIENT), - ok = diameter:stop_service(?SERVER). +stop_services(Config) -> + #group{client_service = CN, + server_service = SN} + = group(Config), + ok = diameter:stop_service(CN), + ok = diameter:stop_service(SN). %% Ensure even transports have been removed from request table. empty(_Config) -> @@ -414,12 +460,13 @@ send_eval(Config) -> = call(Config, Req). %% Send an accounting ACR that the server tries to answer with an -%% inappropriate header, resulting in no answer being sent and the -%% request timing out. +%% inappropriate header. That the error is detected is coded in +%% handle_answer. send_bad_answer(Config) -> Req = ['ACR', {'Accounting-Record-Type', ?EVENT_RECORD}, {'Accounting-Record-Number', 2}], - {timeout, _} = call(Config, Req). + ?answer_message(?SUCCESS) + = call(Config, Req). %% Send an ACR that the server callback answers explicitly with a %% protocol error. @@ -438,8 +485,9 @@ send_arbitrary(Config) -> ['ASA', _SessionId, {'Result-Code', ?SUCCESS} | Avps] = call(Config, Req), {'AVP', [#diameter_avp{name = 'Product-Name', - value = "XXX"}]} - = lists:last(Avps). + value = V}]} + = lists:last(Avps), + "XXX" = string(V, Config). %% Send an unknown AVP (to some client) and check that it comes back. send_unknown(Config) -> @@ -593,9 +641,11 @@ send_nopeer(Config) -> {error, no_connection} = call(Config, Req, [{extra, [?EXTRA]}]). %% Send something on an unconfigured application. -send_noapp(_Config) -> +send_noapp(Config) -> + #group{client_service = CN} + = group(Config), Req = ['STR', {'Termination-Cause', ?LOGOUT}], - {error, no_connection} = diameter:call(?CLIENT, unknown_alias, Req). + {error, no_connection} = diameter:call(CN, unknown_alias, Req). %% Send something that's discarded by prepare_request. send_discard(Config) -> @@ -607,8 +657,10 @@ send_any_1(Config) -> Req = ['STR', {'Termination-Cause', ?LOGOUT}], {error, no_connection} = call(Config, Req, [{filter, {any, []}}]). send_any_2(Config) -> + #group{server_service = SN} + = group(Config), Req = ['STR', {'Termination-Cause', ?LOGOUT}, - {'Destination-Host', [?HOST(?SERVER, "unknown.org")]}], + {'Destination-Host', [?HOST(SN, "unknown.org")]}], ?answer_message(?UNABLE_TO_DELIVER) = call(Config, Req, [{filter, {any, [host, realm]}}]). @@ -620,8 +672,10 @@ send_all_1(Config) -> = call(Config, Req, [{filter, {all, [{host, any}, {realm, Realm}]}}]). send_all_2(Config) -> + #group{server_service = SN} + = group(Config), Req = ['STR', {'Termination-Cause', ?LOGOUT}, - {'Destination-Host', [?HOST(?SERVER, "unknown.org")]}], + {'Destination-Host', [?HOST(SN, "unknown.org")]}], {error, no_connection} = call(Config, Req, [{filter, {all, [host, realm]}}]). @@ -654,8 +708,10 @@ send_encode_error(Config) -> %% Send with filtering and expect success. send_destination_1(Config) -> + #group{server_service = SN} + = group(Config), Req = ['STR', {'Termination-Cause', ?LOGOUT}, - {'Destination-Host', [?HOST(?SERVER, ?REALM)]}], + {'Destination-Host', [?HOST(SN, ?REALM)]}], ['STA', _SessionId, {'Result-Code', ?SUCCESS} | _] = call(Config, Req, [{filter, {all, [host, realm]}}]). send_destination_2(Config) -> @@ -671,8 +727,10 @@ send_destination_3(Config) -> {error, no_connection} = call(Config, Req, [{filter, {all, [host, realm]}}]). send_destination_4(Config) -> + #group{server_service = SN} + = group(Config), Req = ['STR', {'Termination-Cause', ?LOGOUT}, - {'Destination-Host', [?HOST(?SERVER, "unknown.org")]}], + {'Destination-Host', [?HOST(SN, "unknown.org")]}], {error, no_connection} = call(Config, Req, [{filter, {all, [host, realm]}}]). @@ -684,8 +742,10 @@ send_destination_5(Config) -> ?answer_message(?REALM_NOT_SERVED) = call(Config, Req). send_destination_6(Config) -> + #group{server_service = SN} + = group(Config), Req = ['STR', {'Termination-Cause', ?LOGOUT}, - {'Destination-Host', [?HOST(?SERVER, "unknown.org")]}], + {'Destination-Host', [?HOST(SN, "unknown.org")]}], ?answer_message(?UNABLE_TO_DELIVER) = call(Config, Req). @@ -747,19 +807,34 @@ send_anything(Config) -> %% =========================================================================== +group(Config) -> + #group{} = proplists:get_value(group, Config). + +string(V, Config) -> + #group{client_strings = B} = group(Config), + decode(V,B). + +decode(S, true) + when is_list(S) -> + S; +decode(B, false) + when is_binary(B) -> + binary_to_list(B). + call(Config, Req) -> call(Config, Req, []). call(Config, Req, Opts) -> Name = proplists:get_value(testcase, Config), - #group{client_encoding = ReqEncoding, + #group{client_service = CN, + client_encoding = ReqEncoding, client_dict0 = Dict0} = Group - = proplists:get_value(group, Config), - diameter:call(?CLIENT, + = group(Config), + diameter:call(CN, dict(Req, Dict0), msg(Req, ReqEncoding, Dict0), - [{extra, [{Name, Group}, now()]} | Opts]). + [{extra, [{Name, Group}, diameter_lib:now()]} | Opts]). origin({A,C}) -> 2*codec(A) + container(C); @@ -843,35 +918,38 @@ peer_down(_SvcName, _Peer, State) -> %% pick_peer/6-7 -pick_peer(Peers, _, ?CLIENT, _State, {Name, Group}, _) +pick_peer(Peers, _, [$C|_], _State, {Name, Group}, _) when Name /= send_detach -> find(Group, Peers). -pick_peer(_Peers, _, ?CLIENT, _State, {send_nopeer, _}, _, ?EXTRA) -> +pick_peer(_Peers, _, [$C|_], _State, {send_nopeer, _}, _, ?EXTRA) -> false; -pick_peer(Peers, _, ?CLIENT, _State, {send_detach, Group}, _, {_,_}) -> +pick_peer(Peers, _, [$C|_], _State, {send_detach, Group}, _, {_,_}) -> find(Group, Peers). -find(#group{server_encoding = A, server_container = C}, Peers) -> +find(#group{client_service = CN, + server_encoding = A, + server_container = C}, + Peers) -> Id = {A,C}, - [P] = [P || P <- Peers, id(Id, P)], + [P] = [P || P <- Peers, id(Id, P, CN)], {ok, P}. -id(Id, {Pid, _Caps}) -> +id(Id, {Pid, _Caps}, SvcName) -> [{ref, _}, {type, _}, {options, Opts} | _] - = diameter:service_info(?CLIENT, Pid), + = diameter:service_info(SvcName, Pid), lists:member({id, Id}, Opts). %% prepare_request/5-6 -prepare_request(_Pkt, ?CLIENT, {_Ref, _Caps}, {send_discard, _}, _) -> +prepare_request(_Pkt, [$C|_], {_Ref, _Caps}, {send_discard, _}, _) -> {discard, unprepared}; -prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, {Name, Group}, _) -> +prepare_request(Pkt, [$C|_], {_Ref, Caps}, {Name, Group}, _) -> {send, prepare(Pkt, Caps, Name, Group)}. -prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, {send_detach, Group}, _, _) -> +prepare_request(Pkt, [$C|_], {_Ref, Caps}, {send_detach, Group}, _, _) -> {eval_packet, {send, prepare(Pkt, Caps, Group)}, [fun log/2, detach]}. log(#diameter_packet{bin = Bin} = P, T) @@ -1042,10 +1120,10 @@ prepare_retransmit(_Pkt, false, _Peer, _Name, _Group) -> %% handle_answer/6-7 -handle_answer(Pkt, Req, ?CLIENT, Peer, {Name, Group}, _) -> +handle_answer(Pkt, Req, [$C|_], Peer, {Name, Group}, _) -> answer(Pkt, Req, Peer, Name, Group). -handle_answer(Pkt, Req, ?CLIENT, Peer, {send_detach = Name, Group}, _, X) -> +handle_answer(Pkt, Req, [$C|_], Peer, {send_detach = Name, Group}, _, X) -> {Pid, Ref} = X, Pid ! {Ref, answer(Pkt, Req, Peer, Name, Group)}. @@ -1057,15 +1135,12 @@ answer(Pkt, Req, _Peer, Name, #group{client_dict0 = Dict0}) -> [R | Vs] = Dict:'#get-'(answer(Ans, Es, Name)), [Dict:rec2msg(R) | Vs]. -answer(Rec, [_|_], N) - when N == send_long_avp_length; - N == send_short_avp_length; - N == send_zero_avp_length; - N == send_invalid_avp_length; - N == send_invalid_reject; - N == send_unknown_short_mandatory; - N == send_unexpected_mandatory_decode -> +%% An inappropriate E-bit results in a decode error ... +answer(Rec, Es, send_bad_answer) -> + [{5004, #diameter_avp{name = 'Result-Code'}} | _] = Es, Rec; + +%% ... while other errors are reflected in Failed-AVP. answer(Rec, [], _) -> Rec. @@ -1077,11 +1152,13 @@ app(Req, _, Dict0) -> %% handle_error/6 -handle_error(timeout = Reason, _Req, ?CLIENT, _Peer, _, Time) -> - Now = now(), - {Reason, {Time, Now, timer:now_diff(Now, Time)}}; +handle_error(timeout = Reason, _Req, [$C|_], _Peer, _, Time) -> + Now = diameter_lib:now(), + {Reason, {diameter_lib:timestamp(Time), + diameter_lib:timestamp(Now), + diameter_lib:micro_diff(Now, Time)}}; -handle_error(Reason, _Req, ?CLIENT, _Peer, _, _Time) -> +handle_error(Reason, _Req, [$C|_], _Peer, _, _Time) -> {error, Reason}. %% handle_request/3 @@ -1089,7 +1166,7 @@ handle_error(Reason, _Req, ?CLIENT, _Peer, _, _Time) -> %% Note that diameter will set Result-Code and Failed-AVPs if %% #diameter_packet.errors is non-null. -handle_request(#diameter_packet{header = H, msg = M}, ?SERVER, {_Ref, Caps}) -> +handle_request(#diameter_packet{header = H, msg = M}, _, {_Ref, Caps}) -> #diameter_header{end_to_end_id = EI, hop_by_hop_id = HI} = H, diff --git a/lib/diameter/test/diameter_transport_SUITE.erl b/lib/diameter/test/diameter_transport_SUITE.erl index fcffa69c24..f098851bea 100644 --- a/lib/diameter/test/diameter_transport_SUITE.erl +++ b/lib/diameter/test/diameter_transport_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -53,7 +53,7 @@ %% Receive a message. -define(RECV(Pat, Ret), receive Pat -> Ret end). --define(RECV(Pat), ?RECV(Pat, now())). +-define(RECV(Pat), ?RECV(Pat, diameter_util:timestamp())). %% Sockets are opened on the loopback address. -define(ADDR, {127,0,0,1}). @@ -104,7 +104,7 @@ tc() -> reconnect]. init_per_suite(Config) -> - [{sctp, have_sctp()} | Config]. + [{sctp, ?util:have_sctp()} | Config]. end_per_suite(_Config) -> ok. @@ -127,7 +127,10 @@ tcp_accept(_) -> accept(tcp). sctp_accept(Config) -> - if_sctp(fun accept/1, Config). + case lists:member({sctp, true}, Config) of + true -> accept(sctp); + false -> {skip, no_sctp} + end. %% Start multiple accepting transport processes that are connected to %% with an equal number of connecting processes using gen_tcp/sctp @@ -157,7 +160,10 @@ tcp_connect(_) -> connect(tcp). sctp_connect(Config) -> - if_sctp(fun connect/1, Config). + case lists:member({sctp, true}, Config) of + true -> connect(sctp); + false -> {skip, no_sctp} + end. connect(Prot) -> T = {Prot, make_ref()}, @@ -219,7 +225,7 @@ reconnect(_) -> || T <- [listen, connect]]). start_service(SvcName) -> - OH = io_lib:format("~p-~p-~p", tuple_to_list(now())), + OH = diameter_util:unique_string(), Opts = [{application, [{dictionary, diameter_gen_base_rfc6733}, {module, diameter_callback}]}, {'Origin-Host', OH}, @@ -251,28 +257,6 @@ abort(SvcName, LRef, Ref) %% =========================================================================== %% =========================================================================== -%% have_sctp/0 - -have_sctp() -> - case gen_sctp:open() of - {ok, Sock} -> - gen_sctp:close(Sock), - true; - {error, E} when E == eprotonosupport; - E == esocktnosupport -> %% fail on any other reason - false - end. - -%% if_sctp/2 - -if_sctp(F, Config) -> - case proplists:get_value(sctp, Config) of - true -> - F(sctp); - false -> - {skip, no_sctp} - end. - %% init/2 init(accept, {Prot, Ref}) -> @@ -351,7 +335,7 @@ make_msg() -> %% crypto:rand_bytes/1 isn't available on all platforms (since openssl %% isn't) so roll our own. rand_bytes(N) -> - random:seed(now()), + random:seed(diameter_util:seed()), rand_bytes(N, <<>>). rand_bytes(0, Bin) -> @@ -381,37 +365,14 @@ start_connect(tcp, T, Svc, Opts) -> diameter_tcp:start(T, Svc, Opts). %% start_accept/2 -%% -%% Start transports sequentially by having each wait for a message -%% from a job in a queue before commencing. Only one transport with a -%% pending accept is started at a time since diameter_{tcp,sctp} -%% currently assume (and diameter currently implements) this. start_accept(Prot, Ref) -> - Pid = sync(accept, Ref), {Mod, Opts} = tmod(Prot), - - try - {ok, TPid, [?ADDR]} = Mod:start({accept, Ref}, - ?SVC([?ADDR]), - [{port, 0} | Opts]), - ?RECV(?TMSG({TPid, connected})), - TPid - after - Pid ! Ref - end. - -sync(What, Ref) -> - ok = diameter_sync:cast({?MODULE, What, Ref}, - [fun lock/2, Ref, self()], - infinity, - infinity), - receive {start, Ref, Pid} -> Pid end. - -lock(Ref, Pid) -> - Pid ! {start, Ref, self()}, - erlang:monitor(process, Pid), - Ref = receive T -> T end. + {ok, TPid, [?ADDR]} = Mod:start({accept, Ref}, + ?SVC([?ADDR]), + [{port, 0} | Opts]), + ?RECV(?TMSG({TPid, connected})), + TPid. tmod(sctp) -> {diameter_sctp, [{sctp_initmsg, ?SCTP_INIT}]}; @@ -454,7 +415,7 @@ gen_accept(tcp, LSock) -> gen_send(sctp, Sock, Bin) -> {OS, _IS, Id} = getr(assoc), - {_, _, Us} = now(), + {_, _, Us} = diameter_util:timestamp(), gen_sctp:send(Sock, Id, Us rem OS, Bin); gen_send(tcp, Sock, Bin) -> gen_tcp:send(Sock, Bin). @@ -463,7 +424,11 @@ gen_send(tcp, Sock, Bin) -> gen_recv(sctp, Sock) -> {_OS, _IS, Id} = getr(assoc), - ?RECV(?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], Bin}), Bin); + receive + ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], Bin}) + when is_binary(Bin) -> + Bin + end; gen_recv(tcp, Sock) -> tcp_recv(Sock, <<>>). diff --git a/lib/diameter/test/diameter_util.erl b/lib/diameter/test/diameter_util.erl index 92c72c84e7..c496876ee1 100644 --- a/lib/diameter/test/diameter_util.erl +++ b/lib/diameter/test/diameter_util.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -29,7 +29,11 @@ run/1, fold/3, foldl/3, - scramble/1]). + scramble/1, + timestamp/0, + seed/0, + unique_string/0, + have_sctp/0]). %% diameter-specific -export([lport/2, @@ -174,7 +178,7 @@ scramble(L) -> [[fun s/1, L]]). s(L) -> - random:seed(now()), + random:seed(seed()), s([], L). s(Acc, []) -> @@ -184,6 +188,44 @@ s(Acc, L) -> s([T|Acc], H ++ Rest). %% --------------------------------------------------------------------------- +%% timestamp/0 + +timestamp() -> + diameter_lib:timestamp(diameter_lib:now()). + +%% --------------------------------------------------------------------------- +%% seed/0 + +seed() -> + {_,T} = diameter_lib:seed(), + T. + +%% --------------------------------------------------------------------------- +%% unique_string/0 + +unique_string() -> + us(diameter_lib:now()). + +us({M,S,U}) -> + tl(lists:append(["-" ++ integer_to_list(N) || N <- [M,S,U]])); + +us(MonoT) -> + integer_to_list(MonoT). + +%% --------------------------------------------------------------------------- +%% have_sctp/0 + +have_sctp() -> + case gen_sctp:open() of + {ok, Sock} -> + gen_sctp:close(Sock), + true; + {error, E} when E == eprotonosupport; + E == esocktnosupport -> %% fail on any other reason + false + end. + +%% --------------------------------------------------------------------------- %% eval/1 %% %% Evaluate a function in one of a number of forms. @@ -254,13 +296,12 @@ path(Config, Name) -> %% %% Lookup the port number of a tcp/sctp listening transport. -lport(M, {Node, Ref}) -> - rpc:call(Node, ?MODULE, lport, [M, Ref]); +lport(Prot, {Node, Ref}) -> + rpc:call(Node, ?MODULE, lport, [Prot, Ref]); lport(Prot, Ref) -> - Mod = tmod(Prot), [_] = diameter_reg:wait({'_', listener, {Ref, '_'}}), - [N || {listen, N, _} <- Mod:ports(Ref)]. + [N || M <- tmod(Prot), {listen, N, _} <- M:ports(Ref)]. %% --------------------------------------------------------------------------- %% listen/2-3 @@ -292,13 +333,17 @@ connect(Client, Prot, LRef, Opts) -> Ref = add_transport(Client, {connect, opts(Prot, PortNr) ++ Opts}), true = transport(Client, Ref), %% assert - ok = receive - {diameter_event, Client, {up, Ref, _, _, _}} -> ok - after 10000 -> - {Client, Prot, PortNr, process_info(self(), messages)} - end, + diameter_lib:for_n(fun(_) -> ok = up(Client, Ref, Prot, PortNr) end, + proplists:get_value(pool_size, Opts, 1)), Ref. +up(Client, Ref, Prot, PortNr) -> + receive + {diameter_event, Client, {up, Ref, _, _, _}} -> ok + after 10000 -> + {Client, Prot, PortNr, process_info(self(), messages)} + end. + transport(SvcName, Ref) -> [Ref] == [R || [{ref, R} | _] <- diameter:service_info(SvcName, transport), R == Ref]. @@ -327,13 +372,15 @@ add_transport(SvcName, T) -> Ref. tmod(tcp) -> - diameter_tcp; + [diameter_tcp]; tmod(sctp) -> - diameter_sctp. + [diameter_sctp]; +tmod(any) -> + [diameter_sctp, diameter_tcp]. opts(Prot, T) -> - [{transport_module, tmod(Prot)}, - {transport_config, [{ip, ?ADDR}, {port, 0} | opts(T)]}]. + [{transport_module, M} || M <- tmod(Prot)] + ++ [{transport_config, [{ip, ?ADDR}, {port, 0} | opts(T)]}]. opts(listen) -> [{accept, M} || M <- [{256,0,0,1}, ["256.0.0.1", ["^.+$"]]]]; diff --git a/lib/diameter/test/diameter_watchdog_SUITE.erl b/lib/diameter/test/diameter_watchdog_SUITE.erl index b6e8730ec2..5a3ff2c92f 100644 --- a/lib/diameter/test/diameter_watchdog_SUITE.erl +++ b/lib/diameter/test/diameter_watchdog_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2013. All Rights Reserved. +%% Copyright Ericsson AB 2010-2015. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -420,6 +420,7 @@ suspect(TRef, false, SvcName, N) -> %% abuse/1 abuse(F) -> + [] = run([[abuse, F, T] || T <- [listen, connect]]). abuse(F, [_,_,_|_] = Args) -> @@ -672,7 +673,8 @@ jitter(T,D) -> %% Generate a unique hostname for the faked peer. hostname() -> - lists:flatten(io_lib:format("~p-~p-~p", tuple_to_list(now()))). + {M,S,U} = diameter_util:timestamp(), + lists:flatten(io_lib:format("~p-~p-~p", [M,S,U])). putr(Key, Val) -> put({?MODULE, Key}, Val). diff --git a/lib/diameter/test/modules.mk b/lib/diameter/test/modules.mk index 4fea62461c..6da96bd676 100644 --- a/lib/diameter/test/modules.mk +++ b/lib/diameter/test/modules.mk @@ -1,8 +1,7 @@ -#-*-makefile-*- ; force emacs to enter makefile-mode # %CopyrightBegin% # -# Copyright Ericsson AB 2010-2013. All Rights Reserved. +# Copyright Ericsson AB 2010-2015. All Rights Reserved. # # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in @@ -40,6 +39,7 @@ MODULES = \ diameter_gen_sctp_SUITE \ diameter_gen_tcp_SUITE \ diameter_length_SUITE \ + diameter_pool_SUITE \ diameter_reg_SUITE \ diameter_relay_SUITE \ diameter_stats_SUITE \ diff --git a/lib/diameter/vsn.mk b/lib/diameter/vsn.mk index 587ae08b3d..c00bac26bb 100644 --- a/lib/diameter/vsn.mk +++ b/lib/diameter/vsn.mk @@ -1,8 +1,6 @@ -#-*-makefile-*- ; force emacs to enter makefile-mode - # %CopyrightBegin% # -# Copyright Ericsson AB 2010-2014. All Rights Reserved. +# Copyright Ericsson AB 2010-2015. All Rights Reserved. # # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in @@ -18,5 +16,5 @@ # %CopyrightEnd% APPLICATION = diameter -DIAMETER_VSN = 1.8 +DIAMETER_VSN = 1.9 APP_VSN = $(APPLICATION)-$(DIAMETER_VSN)$(PRE_VSN) |