diff options
Diffstat (limited to 'lib/diameter')
19 files changed, 712 insertions, 338 deletions
diff --git a/lib/diameter/doc/src/diameter_app.xml b/lib/diameter/doc/src/diameter_app.xml index d4fb792787..e6c9cc9a90 100644 --- a/lib/diameter/doc/src/diameter_app.xml +++ b/lib/diameter/doc/src/diameter_app.xml @@ -565,7 +565,8 @@ Equivalent to</p> </pre> <p> where <c>Avps</c> sets the Origin-Host, Origin-Realm, the specified -Result-Code and (if the request contained one) Session-Id AVP's.</p> +Result-Code and (if the request contained one) Session-Id AVP's, and +possibly Failed-AVP as described below.</p> <p> Returning a value other than 3xxx or 5xxx will cause the request @@ -573,6 +574,14 @@ process in question to fail, as will returning a 5xxx value if the peer connection in question has been configured with the RFC 3588 common dictionary <c>diameter_gen_base_rfc3588</c>. (Since RFC 3588 only allows 3xxx values in an answer-message.)</p> + +<p> +When returning 5xxx, Failed-AVP will be populated with the AVP of the +first matching Result-Code/AVP pair in the <c>errors</c> field of the +argument &packet;, if found. +If this is not appropriate then an answer-message should be +constructed explicitly and returned in a <c>reply</c> tuple +instead.</p> </item> <tag><c>{relay, Opts}</c></tag> @@ -592,8 +601,7 @@ header of the relayed request.</p> The returned <c>Opts</c> should not specify <c>detach</c>. A subsequent &handle_answer; callback for the relayed request must return its first -argument, the <c>#diameter_packet{}</c> record containing the answer -message. +argument, the &packet; containing the answer message. Note that the <c>extra</c> option can be specified to supply arguments that can distinguish the relay case from others if so desired. Any other return value (for example, from a diff --git a/lib/diameter/doc/src/diameter_transport.xml b/lib/diameter/doc/src/diameter_transport.xml index 8bccf6521e..9161bd1f48 100644 --- a/lib/diameter/doc/src/diameter_transport.xml +++ b/lib/diameter/doc/src/diameter_transport.xml @@ -137,15 +137,14 @@ passed to the former.</p> <p> The start function should use the <c>Host-IP-Address</c> list in -<c>Svc</c> and/or <c>Config</c> to select an appropriate list of local -IP addresses, and should return this list if different from the -<c>Svc</c> addresses. +<c>Svc</c> and/or <c>Config</c> to select and return an appropriate +list of local IP addresses. In the connecting case, the local address list can instead be communicated in a <c>connected</c> message (see &MESSAGES; below) following connection establishment. In either case, the local address list is used to populate <c>Host-IP-Address</c> AVPs in outgoing capabilities exchange -messages.</p> +messages if <c>Host-IP-Address</c> is unspecified.</p> <p> A transport process must implement the message interface documented below. diff --git a/lib/diameter/include/diameter_gen.hrl b/lib/diameter/include/diameter_gen.hrl index 03aa557c2e..55aae3a243 100644 --- a/lib/diameter/include/diameter_gen.hrl +++ b/lib/diameter/include/diameter_gen.hrl @@ -25,11 +25,23 @@ -define(THROW(T), throw({?MODULE, T})). -%%% --------------------------------------------------------------------------- -%%% # encode_avps/3 -%%% -%%% Returns: binary() -%%% --------------------------------------------------------------------------- +-type parent_name() :: atom(). %% parent = Message or AVP +-type parent_record() :: tuple(). %% +-type avp_name() :: atom(). +-type avp_record() :: tuple(). +-type avp_values() :: [{avp_name(), term()}]. + +-type non_grouped_avp() :: #diameter_avp{}. +-type grouped_avp() :: nonempty_improper_list(#diameter_avp{}, [avp()]). +-type avp() :: non_grouped_avp() | grouped_avp(). + +%% --------------------------------------------------------------------------- +%% # encode_avps/2 +%% --------------------------------------------------------------------------- + +-spec encode_avps(parent_name(), parent_record() | avp_values()) + -> binary() + | no_return(). encode_avps(Name, Vals) when is_list(Vals) -> @@ -129,42 +141,26 @@ pack_AVP(Name, #diameter_avp{name = AvpName, orelse ?THROW([known_avp_as_AVP, Name, AvpName, Data]), e(AvpName, [Data]). -%%% --------------------------------------------------------------------------- -%%% # decode_avps/2 -%%% -%%% Returns: {Rec, Avps, Failed} -%%% -%%% Rec = decoded message record -%%% Avps = list of Avp -%%% Failed = list of {ResultCode, #diameter_avp{}} -%%% -%%% Avp = #diameter_avp{} if type is not Grouped -%%% | list of Avp where first element has type Grouped -%%% and following elements are its component -%%% AVP's. -%%% --------------------------------------------------------------------------- +%% --------------------------------------------------------------------------- +%% # decode_avps/2 +%% --------------------------------------------------------------------------- + +-spec decode_avps(parent_name(), [#diameter_avp{}]) + -> {parent_record(), [avp()], Failed} + when Failed :: [{5000..5999, #diameter_avp{}}]. decode_avps(Name, Recs) -> - d_rc(Name, lists:foldl(fun(T,A) -> decode(Name, T, A) end, - {[], {newrec(Name), []}}, - Recs)). + {Avps, {Rec, Failed}} + = lists:foldl(fun(T,A) -> decode(Name, T, A) end, + {[], {newrec(Name), []}}, + Recs), + {Rec, Avps, Failed ++ missing(Rec, Name)}. +%% Append 5005 errors so that a 5014 for the same AVP will take +%% precedence in a Result-Code/Failed-AVP setting. newrec(Name) -> '#new-'(name2rec(Name)). -%% No errors so far: keep looking. -d_rc(Name, {Avps, {Rec, [] = Failed}}) -> - try - true = have_required_avps(Rec, Name), - {Rec, Avps, Failed} - catch - throw: {?MODULE, {AvpName, Reason}} -> - diameter_lib:log({decode, error}, - ?MODULE, - ?LINE, - {AvpName, Reason, Rec}), - {Rec, Avps, [{5005, empty_avp(AvpName)}]} - end; %% 3588: %% %% DIAMETER_MISSING_AVP 5005 @@ -175,9 +171,17 @@ d_rc(Name, {Avps, {Rec, [] = Failed}}) -> %% Vendor-Id if applicable. The value field of the missing AVP %% should be of correct minimum length and contain zeroes. -%% Or not. Only need to report the first error so look no further. -d_rc(_, {Avps, {Rec, Failed}}) -> - {Rec, Avps, lists:reverse(Failed)}. +missing(Rec, Name) -> + [{5005, empty_avp(F)} || F <- '#info-'(element(1, Rec), fields), + A <- [avp_arity(Name, F)], + false <- [have_arity(A, '#get-'(F, Rec))]]. + +%% Maximum arities have already been checked in building the record. + +have_arity({Min, _}, L) -> + Min =< length(L); +have_arity(N, V) -> + N /= 1 orelse V /= undefined. %% empty_avp/1 @@ -192,25 +196,6 @@ empty_avp(Name) -> data = empty_value(Name), type = Type}. -%% have_required_avps/2 - -have_required_avps(Rec, Name) -> - lists:foreach(fun(F) -> hra(Name, F, Rec) end, - '#info-'(element(1, Rec), fields)), - true. - -hra(Name, AvpName, Rec) -> - Arity = avp_arity(Name, AvpName), - hra(Arity, '#get-'(AvpName, Rec)) - orelse ?THROW({AvpName, {insufficient_arity, Arity}}). - -%% Maximum arities have already been checked in building the record. - -hra({Min, _}, L) -> - Min =< length(L); -hra(N, V) -> - N /= 1 orelse V /= undefined. - %% 3588, ch 7: %% %% The Result-Code AVP describes the error that the Diameter node @@ -227,23 +212,22 @@ decode(Name, #diameter_avp{code = Code, vendor_id = Vid} = Avp, Acc) -> %% decode/4 -%% Don't know this AVP: see if it can be packed in an 'AVP' field -%% undecoded, unless it's mandatory. Need to give Failed-AVP special -%% treatment since it'll contain any unrecognized mandatory AVP's. -decode(Name, 'AVP', #diameter_avp{is_mandatory = M} = Avp, {Avps, Acc}) -> - {[Avp | Avps], if M, Name /= 'Failed-AVP' -> - unknown(Avp, Acc); - true -> - pack_AVP(Name, Avp, Acc) - end}; -%% Note that the type field is 'undefined' in this case. - -%% Or try to decode. decode(Name, {AvpName, Type}, Avp, Acc) -> - d(Name, Avp#diameter_avp{name = AvpName, type = Type}, Acc). + d(Name, Avp#diameter_avp{name = AvpName, type = Type}, Acc); + +decode(Name, 'AVP', Avp, Acc) -> + decode_AVP(Name, Avp, Acc). %% d/3 +%% Don't try to decode the value of a Failed-AVP component since it +%% probably won't. Note that matching on 'Failed-AVP' assumes that +%% this is the RFC AVP, with code 279. Strictly, this doesn't need to +%% be the case, so we're assuming no one defines another Failed-AVP. +d('Failed-AVP' = Name, Avp, Acc) -> + decode_AVP(Name, Avp, Acc); + +%% Or try to decode. d(Name, Avp, {Avps, Acc}) -> #diameter_avp{name = AvpName, data = Data} @@ -265,17 +249,25 @@ d(Name, Avp, {Avps, Acc}) -> ?LINE, {Reason, Avp, erlang:get_stacktrace()}), {Rec, Failed} = Acc, - {[Avp|Avps], {Rec, [{rc(Reason), Avp} | Failed]}} + {[Avp|Avps], {Rec, [rc(Reason, Avp) | Failed]}} end. +%% decode_AVP/3 +%% +%% Don't know this AVP: see if it can be packed in an 'AVP' field +%% undecoded. Note that the type field is 'undefined' in this case. + +decode_AVP(Name, Avp, {Avps, Acc}) -> + {[Avp | Avps], pack_AVP(Name, Avp, Acc)}. + %% rc/1 %% diameter_types will raise an error of this form to communicate %% DIAMETER_INVALID_AVP_LENGTH (5014). A module specified to a %% @custom_types tag in a spec file can also raise an error of this %% form. -rc({'DIAMETER', RC, _}) -> - RC; +rc({'DIAMETER', 5014 = RC, _}, #diameter_avp{name = AvpName} = Avp) -> + {RC, Avp#diameter_avp{data = empty_value(AvpName)}}; %% 3588: %% @@ -283,20 +275,13 @@ rc({'DIAMETER', RC, _}) -> %% The request contained an AVP with an invalid value in its data %% portion. A Diameter message indicating this error MUST include %% the offending AVPs within a Failed-AVP AVP. -rc(_) -> - 5004. +rc(_, Avp) -> + {5004, Avp}. %% ungroup/2 -%% -%% Returns: {Avp, Dec} -%% -%% Avp = #diameter_avp{} if type is not Grouped -%% | list of Avp where first element has type Grouped -%% and following elements are its component -%% AVP's. -%% = as for decode_avps/2 -%% -%% Dec = #diameter_avp{}, either Avp or its head in the list case. + +-spec ungroup(term(), #diameter_avp{}) + -> {avp(), #diameter_avp{}}. %% The decoded value in the Grouped case is as returned by grouped_avp/3: %% a record and a list of component AVP's. @@ -325,10 +310,18 @@ pack_avp(_, Arity, Avp, Acc) -> %% pack_AVP/3 -pack_AVP(Name, Avp, Acc) -> +%% Give Failed-AVP special treatment since it'll contain any +%% unrecognized mandatory AVP's. +pack_AVP(Name, #diameter_avp{is_mandatory = true} = Avp, Acc) + when Name /= 'Failed-AVP' -> + {Rec, Failed} = Acc, + {Rec, [{5001, Avp} | Failed]}; + +pack_AVP(Name, #diameter_avp{is_mandatory = M} = Avp, Acc) -> case avp_arity(Name, 'AVP') of 0 -> - unknown(Avp, Acc); + {Rec, Failed} = Acc, + {Rec, [{if M -> 5001; true -> 5008 end, Avp} | Failed]}; Arity -> pack(Arity, 'AVP', Avp, Acc) end. @@ -345,9 +338,6 @@ pack_AVP(Name, Avp, Acc) -> %% A message was received with an AVP that MUST NOT be present. The %% Failed-AVP AVP MUST be included and contain a copy of the %% offending AVP. -%% -unknown(#diameter_avp{is_mandatory = B} = Avp, {Rec, Failed}) -> - {Rec, [{if B -> 5001; true -> 5008 end, Avp} | Failed]}. %% pack/4 @@ -386,23 +376,29 @@ value('AVP', Avp) -> value(_, Avp) -> Avp#diameter_avp.value. -%%% --------------------------------------------------------------------------- -%%% # grouped_avp/3 -%%% --------------------------------------------------------------------------- +%% --------------------------------------------------------------------------- +%% # grouped_avp/3 +%% --------------------------------------------------------------------------- + +-spec grouped_avp(decode, avp_name(), binary()) + -> {avp_record(), [avp()]}; + (encode, avp_name(), avp_record() | avp_values()) + -> binary() + | no_return(). grouped_avp(decode, Name, Data) -> {Rec, Avps, []} = decode_avps(Name, diameter_codec:collect_avps(Data)), {Rec, Avps}; -%% Note that a failed match here will result in 5004. Note that this is -%% the only AVP type that doesn't just return the decoded value, also -%% returning the list of component #diameter_avp{}'s. +%% A failed match here will result in 5004. Note that this is the only +%% AVP type that doesn't just return the decoded record, also +%% returning the list of component AVP's. grouped_avp(encode, Name, Data) -> encode_avps(Name, Data). -%%% --------------------------------------------------------------------------- -%%% # empty_group/1 -%%% --------------------------------------------------------------------------- +%% --------------------------------------------------------------------------- +%% # empty_group/1 +%% --------------------------------------------------------------------------- empty_group(Name) -> list_to_binary(empty_body(Name)). @@ -423,9 +419,9 @@ z(Name) -> Bin = diameter_codec:pack_avp(avp_header(Name), empty_value(Name)), << <<0>> || <<_>> <= Bin >>. -%%% --------------------------------------------------------------------------- -%%% # empty/1 -%%% --------------------------------------------------------------------------- +%% --------------------------------------------------------------------------- +%% # empty/1 +%% --------------------------------------------------------------------------- empty(AvpName) -> avp(encode, zero, AvpName). diff --git a/lib/diameter/src/base/diameter_capx.erl b/lib/diameter/src/base/diameter_capx.erl index 9a443fead0..4b821f5139 100644 --- a/lib/diameter/src/base/diameter_capx.erl +++ b/lib/diameter/src/base/diameter_capx.erl @@ -282,9 +282,26 @@ build_CEA(_, LCaps, RCaps, Dict, CEA) -> [] -> Dict:'#set-'({'Result-Code', ?NOSECURITY}, CEA); [_] = IS -> - Dict:'#set-'({'Inband-Security-Id', IS}, CEA) + Dict:'#set-'({'Inband-Security-Id', inband_security(IS)}, CEA) end. +%% Only set Inband-Security-Id if different from the default, since +%% RFC 6733 recommends against the AVP: +%% +%% 6.10. Inband-Security-Id AVP +%% +%% The Inband-Security-Id AVP (AVP Code 299) is of type Unsigned32 and +%% is used in order to advertise support of the security portion of the +%% application. The use of this AVP in CER and CEA messages is NOT +%% RECOMMENDED. Instead, discovery of a Diameter entity's security +%% capabilities can be done either through static configuration or via +%% Diameter Peer Discovery as described in Section 5.2. + +inband_security([?NO_INBAND_SECURITY]) -> + []; +inband_security([_] = IS) -> + IS. + %% common_security/2 common_security(#diameter_caps{inband_security_id = LS}, diff --git a/lib/diameter/src/base/diameter_codec.erl b/lib/diameter/src/base/diameter_codec.erl index e446a0209c..6c0e73de36 100644 --- a/lib/diameter/src/base/diameter_codec.erl +++ b/lib/diameter/src/base/diameter_codec.erl @@ -38,6 +38,10 @@ -define(MASK(N,I), ((I) band (1 bsl (N)))). +-type u32() :: 0..16#FFFFFFFF. +-type u24() :: 0..16#FFFFFF. +-type u1() :: 0..1. + %% 0 1 2 3 %% 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 %% +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ @@ -55,9 +59,13 @@ %% +-+-+-+-+-+-+-+-+-+-+-+-+- %%% --------------------------------------------------------------------------- -%%% # encode/[2-4] +%%% # encode/2 %%% --------------------------------------------------------------------------- +-spec encode(module(), Msg :: term()) + -> #diameter_packet{} + | no_return(). + encode(Mod, #diameter_packet{} = Pkt) -> try e(Mod, Pkt) @@ -217,6 +225,9 @@ rec2msg(Mod, Rec) -> %% Unsuccessfully decoded AVPs will be placed in #diameter_packet.errors. +-spec decode(module(), #diameter_packet{} | bitstring()) + -> #diameter_packet{}. + decode(Mod, Pkt) -> decode(Mod:id(), Mod, Pkt). @@ -225,9 +236,9 @@ decode(Mod, Pkt) -> %% question. decode(?APP_ID_RELAY, _, #diameter_packet{} = Pkt) -> case collect_avps(Pkt) of - {Bs, As} -> + {E, As} -> Pkt#diameter_packet{avps = As, - errors = [Bs]}; + errors = [E]}; As -> Pkt#diameter_packet{avps = As} end; @@ -251,12 +262,12 @@ decode(Id, Mod, Bin) when is_bitstring(Bin) -> decode(Id, Mod, #diameter_packet{header = decode_header(Bin), bin = Bin}). -decode_avps(MsgName, Mod, Pkt, {Bs, Avps}) -> %% invalid avp bits ... +decode_avps(MsgName, Mod, Pkt, {E, Avps}) -> ?LOG(invalid, Pkt#diameter_packet.bin), #diameter_packet{errors = Failed} = P = decode_avps(MsgName, Mod, Pkt, Avps), - P#diameter_packet{errors = [Bs | Failed]}; + P#diameter_packet{errors = [E | Failed]}; decode_avps('', Mod, Pkt, Avps) -> %% unknown message ... ?LOG(unknown, {Mod, Pkt#diameter_packet.header}), @@ -275,6 +286,10 @@ decode_avps(MsgName, Mod, Pkt, Avps) -> %% ... or not %%% # decode_header/1 %%% --------------------------------------------------------------------------- +-spec decode_header(bitstring()) + -> #diameter_header{} + | false. + decode_header(<<Version:8, MsgLength:24, CmdFlags:1/binary, @@ -324,6 +339,13 @@ decode_header(_) -> %% wraparound counter. The 8-bit counter is incremented each time the %% system is restarted. +-spec sequence_numbers(#diameter_packet{} + | #diameter_header{} + | binary() + | Seq) + -> Seq + when Seq :: {HopByHopId :: u32(), EndToEndId :: u32()}. + sequence_numbers({_,_} = T) -> T; @@ -345,6 +367,9 @@ sequence_numbers(<<_:12/binary, H:32, E:32, _/binary>>) -> %%% # hop_by_hop_id/2 %%% --------------------------------------------------------------------------- +-spec hop_by_hop_id(u32(), binary()) + -> binary(). + hop_by_hop_id(Id, <<H:12/binary, _:32, T/binary>>) -> <<H/binary, Id:32, T/binary>>. @@ -352,6 +377,10 @@ hop_by_hop_id(Id, <<H:12/binary, _:32, T/binary>>) -> %%% # msg_name/2 %%% --------------------------------------------------------------------------- +-spec msg_name(module(), #diameter_header{}) + -> atom() + | {ApplicationId :: u32(), CommandCode :: u24(), Rbit :: u1()}. + msg_name(Dict0, #diameter_header{application_id = ?APP_ID_COMMON, cmd_code = C, is_request = R}) -> @@ -367,6 +396,9 @@ msg_name(_, Hdr) -> %%% # msg_id/1 %%% --------------------------------------------------------------------------- +-spec msg_id(#diameter_packet{} | #diameter_header{}) + -> {ApplicationId :: u32(), CommandCode :: u24(), Rbit :: u1()}. + msg_id(#diameter_packet{msg = [#diameter_header{} = Hdr | _]}) -> msg_id(Hdr); @@ -389,6 +421,12 @@ msg_id(<<_:32, Rbit:1, _:7, CmdCode:24, ApplId:32, _/bitstring>>) -> %% order in the binary. Note also that grouped avp's aren't unraveled, %% only those at the top level. +-spec collect_avps(#diameter_packet{} | bitstring()) + -> [Avp] + | {Error, [Avp]} + when Avp :: #diameter_avp{}, + Error :: {5014, #diameter_avp{}}. + collect_avps(#diameter_packet{bin = Bin}) -> <<_:20/binary, Avps/bitstring>> = Bin, collect_avps(Avps); @@ -403,8 +441,8 @@ collect_avps(Bin, N, Acc) -> {Rest, AVP} -> collect_avps(Rest, N+1, [AVP#diameter_avp{index = N} | Acc]) catch - ?FAILURE(_) -> - {Bin, Acc} + ?FAILURE(Error) -> + {Error, Acc} end. %% 0 1 2 3 @@ -422,42 +460,87 @@ collect_avps(Bin, N, Acc) -> %% split_avp/1 split_avp(Bin) -> - 8 =< size(Bin) orelse ?THROW(truncated_header), + {Code, V, M, P, Len, HdrLen} = split_head(Bin), + {Data, B} = split_data(Bin, HdrLen, Len - HdrLen), - <<Code:32, Flags:1/binary, Length:24, Rest/bitstring>> - = Bin, + {B, #diameter_avp{code = Code, + vendor_id = V, + is_mandatory = 1 == M, + need_encryption = 1 == P, + data = Data}}. - DataSize = Length - 8, % size(Code+Flags+Length) = 8 octets - PadSize = (4 - (DataSize rem 4)) rem 4, +%% split_head/1 - DataSize + PadSize =< size(Rest) - orelse ?THROW(truncated_data), +split_head(<<Code:32, 1:1, M:1, P:1, _:5, Len:24, V:32, _/bitstring>>) -> + {Code, V, M, P, Len, 12}; - <<Data:DataSize/binary, _:PadSize/binary, R/bitstring>> - = Rest, - <<Vbit:1, Mbit:1, Pbit:1, _Reserved:5>> - = Flags, +split_head(<<Code:32, 0:1, M:1, P:1, _:5, Len:24, _/bitstring>>) -> + {Code, undefined, M, P, Len, 8}; - 0 == Vbit orelse 4 =< size(Data) - orelse ?THROW(truncated_vendor_id), +split_head(Bin) -> + ?THROW({5014, #diameter_avp{data = Bin}}). + +%% 3588: +%% +%% DIAMETER_INVALID_AVP_LENGTH 5014 +%% The request contained an AVP with an invalid length. A Diameter +%% message indicating this error MUST include the offending AVPs +%% within a Failed-AVP AVP. - {Vid, D} = vid(Vbit, Data), - {R, #diameter_avp{code = Code, - vendor_id = Vid, - is_mandatory = 1 == Mbit, - need_encryption = 1 == Pbit, - data = D}}. +%% 6733: +%% +%% DIAMETER_INVALID_AVP_LENGTH 5014 +%% +%% The request contained an AVP with an invalid length. A Diameter +%% message indicating this error MUST include the offending AVPs +%% within a Failed-AVP AVP. In cases where the erroneous AVP length +%% value exceeds the message length or is less than the minimum AVP +%% ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ +%% header length, it is sufficient to include the offending AVP +%% ^^^^^^^^^^^^^ +%% header and a zero filled payload of the minimum required length +%% for the payloads data type. If the AVP is a Grouped AVP, the +%% Grouped AVP header with an empty payload would be sufficient to +%% indicate the offending AVP. In the case where the offending AVP +%% header cannot be fully decoded when the AVP length is less than +%% the minimum AVP header length, it is sufficient to include an +%% offending AVP header that is formulated by padding the incomplete +%% AVP header with zero up to the minimum AVP header length. +%% +%% The underlined clause must be in error since (1) a header less than +%% the minimum value mean we don't know the identity of the AVP and +%% (2) the last sentence covers this case. -%% The RFC is a little misleading when stating that OctetString is -%% padded to a 32-bit boundary while other types align naturally. All -%% other types are already multiples of 32 bits so there's no need to -%% distinguish between types here. Any invalid lengths will result in -%% decode error in diameter_types. +%% split_data/3 -vid(1, <<Vid:32, Data/bitstring>>) -> - {Vid, Data}; -vid(0, Data) -> - {undefined, Data}. +split_data(Bin, HdrLen, Len) + when 0 =< Len -> + split_data(Bin, HdrLen, Len, (4 - (Len rem 4)) rem 4); + +split_data(_, _, _) -> + invalid_avp_length(). + +%% split_data/4 + +split_data(Bin, HdrLen, Len, Pad) -> + <<_:HdrLen/binary, T/bitstring>> = Bin, + case T of + <<Data:Len/binary, _:Pad/binary, Rest/bitstring>> -> + {Data, Rest}; + _ -> + invalid_avp_length() + end. + +%% invalid_avp_length/0 +%% +%% AVP Length doesn't mesh with payload. Induce a decode error by +%% returning a payload that no valid Diameter type can have. This is +%% so that a known AVP will result in 5014 error with a zero'd +%% payload. Here we simply don't know how to construct this payload. +%% (Yes, this solution is an afterthought.) + +invalid_avp_length() -> + {<<0:1>>, <<>>}. %%% --------------------------------------------------------------------------- %%% # pack_avp/1 @@ -472,20 +555,35 @@ vid(0, Data) -> pack_avp(#diameter_avp{data = [#diameter_avp{} | _] = Avps} = A) -> pack_avp(A#diameter_avp{data = encode_avps(Avps)}); -%% ... data as a type/value tuple, possibly with header data, ... +%% ... data as a type/value tuple ... pack_avp(#diameter_avp{data = {Type, Value}} = A) when is_atom(Type) -> pack_avp(A#diameter_avp{data = diameter_types:Type(encode, Value)}); + +%% ... with a header in various forms ... pack_avp(#diameter_avp{data = {{_,_,_} = T, {Type, Value}}}) -> pack_avp(T, iolist_to_binary(diameter_types:Type(encode, Value))); + pack_avp(#diameter_avp{data = {{_,_,_} = T, Bin}}) when is_binary(Bin) -> pack_avp(T, Bin); + pack_avp(#diameter_avp{data = {Dict, Name, Value}} = A) -> {Code, _Flags, Vid} = Hdr = Dict:avp_header(Name), {Name, Type} = Dict:avp_name(Code, Vid), pack_avp(A#diameter_avp{data = {Hdr, {Type, Value}}}); +pack_avp(#diameter_avp{code = undefined, data = Bin}) + when is_binary(Bin) -> + %% Reset the AVP Length of an AVP Header resulting from a 5014 + %% error. The RFC doesn't explicitly say to do this but the + %% receiver can't correctly extract this and following AVP's + %% without a correct length. On the downside, the header doesn't + %% reveal if the received header has been padded. + Pad = 8*header_length(Bin) - bit_size(Bin), + Len = size(<<H:5/binary, _:24, T/binary>> = <<Bin/bitstring, 0:Pad>>), + <<H/binary, Len:24, T/binary>>; + %% ... or as an iolist. pack_avp(#diameter_avp{code = Code, vendor_id = V, @@ -497,6 +595,11 @@ pack_avp(#diameter_avp{code = Code, {P, 2#00100000}]), pack_avp({Code, Flags, V}, iolist_to_binary(Data)). +header_length(<<_:32, 1:1, _/bitstring>>) -> + 12; +header_length(_) -> + 8. + flag_avp({true, B}, F) -> F bor B; flag_avp({false, _}, F) -> diff --git a/lib/diameter/src/base/diameter_peer_fsm.erl b/lib/diameter/src/base/diameter_peer_fsm.erl index 6be4259510..4e55864168 100644 --- a/lib/diameter/src/base/diameter_peer_fsm.erl +++ b/lib/diameter/src/base/diameter_peer_fsm.erl @@ -233,20 +233,21 @@ start_transport(Addrs0, T) -> {TPid, Addrs, Tmo, Data} -> erlang:monitor(process, TPid), q_next(TPid, Addrs0, Tmo, Data), - {TPid, addrs(Addrs, Addrs0)}; + {TPid, Addrs}; No -> exit({shutdown, No}) end. -addrs([], Addrs0) -> - Addrs0; -addrs(Addrs, _) -> - Addrs. - -svc(Svc, []) -> - Svc; -svc(Svc, Addrs) -> - readdr(Svc, Addrs). +svc(#diameter_service{capabilities = LCaps0} = Svc, Addrs) -> + #diameter_caps{host_ip_address = Addrs0} + = LCaps0, + case Addrs0 of + [] -> + LCaps = LCaps0#diameter_caps{host_ip_address = Addrs}, + Svc#diameter_service{capabilities = LCaps}; + [_|_] -> + Svc + end. readdr(#diameter_service{capabilities = LCaps0} = Svc, Addrs) -> LCaps = LCaps0#diameter_caps{host_ip_address = Addrs}, @@ -360,7 +361,7 @@ transition({diameter, {TPid, connected, Remote, LAddrs}}, service = Svc} = S) -> transition({diameter, {TPid, connected, Remote}}, - S#state{service = readdr(Svc, LAddrs)}); + S#state{service = svc(Svc, LAddrs)}); %% Connection from peer. transition({diameter, {TPid, connected}}, @@ -702,13 +703,13 @@ build_answer('CER', N -> {cea(CEA, N, Dict0), [fun open/5, Pkt, SupportedApps, Caps, - {accept, hd([_] = IS)}]} + {accept, inband_security(IS)}]} catch ?FAILURE(Reason) -> rejected(Reason, {'CER', Reason, Caps, Pkt}, S) end; -%% The error checks below are similar to those in diameter_service for +%% The error checks below are similar to those in diameter_traffic for %% other messages. Should factor out the commonality. build_answer(Type, @@ -719,6 +720,11 @@ build_answer(Type, RC = rc(H, Es), {answer(Type, RC, Es, S), post(Type, RC, Pkt, S)}. +inband_security([]) -> + ?NO_INBAND_SECURITY; +inband_security([IS]) -> + IS. + cea(CEA, ok, _) -> CEA; cea(CEA, 2001, _) -> @@ -742,7 +748,14 @@ rejected(N, T, S) -> rejected({N, []}, T, S). answer(Type, RC, Es, S) -> - set(answer(Type, RC, S), failed_avp([A || {_,A} <- Es])). + set(answer(Type, RC, S), failed_avp(RC, Es)). + +failed_avp(RC, [{RC, Avp} | _]) -> + [{'Failed-AVP', [{'AVP', [Avp]}]}]; +failed_avp(RC, [_ | Es]) -> + failed_avp(RC, Es); +failed_avp(_, [] = No) -> + No. answer(Type, RC, S) -> answer_message(answer(Type, S), RC). @@ -762,13 +775,6 @@ is_origin({N, _}) -> orelse N == 'Origin-Realm' orelse N == 'Origin-State-Id'. -%% failed_avp/1 - -failed_avp([] = No) -> - No; -failed_avp(Avps) -> - [{'Failed-AVP', [[{'AVP', Avps}]]}]. - %% set/2 set(Ans, []) -> @@ -784,7 +790,7 @@ rc(#diameter_header{is_error = true}, _) -> 3008; %% DIAMETER_INVALID_HDR_BITS rc(_, [Bs|_]) - when is_bitstring(Bs) -> + when is_bitstring(Bs) -> %% from old code 3009; %% DIAMETER_INVALID_HDR_BITS rc(#diameter_header{version = ?DIAMETER_VERSION}, Es) -> diff --git a/lib/diameter/src/base/diameter_traffic.erl b/lib/diameter/src/base/diameter_traffic.erl index 25b902e3f2..0b15e68ec7 100644 --- a/lib/diameter/src/base/diameter_traffic.erl +++ b/lib/diameter/src/base/diameter_traffic.erl @@ -226,10 +226,10 @@ recv_R(false = No, _, _, _, _) -> %% transport has gone down collect_avps(Pkt) -> case diameter_codec:collect_avps(Pkt) of - {_Bs, As} -> - As; - As -> - As + {_Error, Avps} -> + Avps; + Avps -> + Avps end. %% recv_R/6 @@ -300,7 +300,7 @@ errors(_, #diameter_packet{header = #diameter_header{version = V}, %% AVP's definition. errors(_, #diameter_packet{errors = [Bs | Es]} = Pkt) - when is_bitstring(Bs) -> + when is_bitstring(Bs) -> %% from old code Pkt#diameter_packet{errors = [3009 | Es]}; %% DIAMETER_COMMAND_UNSUPPORTED 3001 @@ -479,10 +479,9 @@ answer_message(RC, #diameter_caps{origin_host = {OH,_}, origin_realm = {OR,_}}, Dict0, - #diameter_packet{avps = Avps} - = Pkt) -> + Pkt) -> ?LOG({error, RC}, Pkt), - {Dict0, answer_message(OH, OR, RC, Dict0, Avps)}. + {Dict0, answer_message(OH, OR, RC, Dict0, Pkt)}. %% resend/7 @@ -595,71 +594,87 @@ reply([Msg], Dict, TPid, Dict0, Fs, ReqPkt) is_tuple(Msg) -> reply(Msg, Dict, TPid, Dict0, Fs, ReqPkt#diameter_packet{errors = []}); -%% No errors or a diameter_header/avp list. reply(Msg, Dict, TPid, Dict0, Fs, ReqPkt) -> - Pkt = encode(Dict, reset(make_answer_packet(Msg, ReqPkt), Dict), Fs), + Pkt = encode(Dict, + reset(make_answer_packet(Msg, ReqPkt), Dict, Dict0), + Fs), incr(send, Pkt, Dict, TPid, Dict0), %% count outgoing result codes send(TPid, Pkt). -%% reset/2 +%% reset/3 %% Header/avps list: send as is. -reset(#diameter_packet{msg = [#diameter_header{} | _]} = Pkt, _) -> +reset(#diameter_packet{msg = [#diameter_header{} | _]} = Pkt, _, _) -> Pkt; %% No errors to set or errors explicitly ignored. -reset(#diameter_packet{errors = Es} = Pkt, _) +reset(#diameter_packet{errors = Es} = Pkt, _, _) when Es == []; Es == false -> Pkt; %% Otherwise possibly set Result-Code and/or Failed-AVP. -reset(#diameter_packet{msg = Msg, errors = Es} = Pkt, Dict) -> - Pkt#diameter_packet{msg = reset(Msg, Dict, Es)}. - -%% reset/3 - -reset(Msg, Dict, Es) - when is_list(Es) -> - {E3, E5, Fs} = partition(Es), - FailedAVP = failed_avp(Msg, lists:reverse(Fs), Dict), - reset(set(Msg, FailedAVP, Dict), - Dict, - choose(is_answer_message(Msg, Dict), E3, E5)); - -reset(Msg, Dict, N) - when is_integer(N) -> - ResultCode = rc(Msg, {'Result-Code', N}, Dict), - set(Msg, ResultCode, Dict); - -reset(Msg, _, _) -> - Msg. +reset(#diameter_packet{msg = Msg, errors = Es} = Pkt, Dict, Dict0) -> + {RC, Failed} = select_error(Msg, Es, Dict0), + Pkt#diameter_packet{msg = reset(Msg, Dict, RC, Failed)}. -partition(Es) -> - lists:foldl(fun pacc/2, {false, false, []}, Es). - -%% Note that the errors list can contain not only integer() and -%% {integer(), #diameter_avp{}} but also #diameter_avp{}. The latter -%% isn't something that's returned by decode but can be set in a reply -%% for encode. +%% select_error/3 +%% +%% Extract the first appropriate RC or {RC, #diameter_avp{}} +%% pair from an errors list, and accumulate all #diameter_avp{}. +%% +%% RFC 6733: +%% +%% 7.5. Failed-AVP AVP +%% +%% The Failed-AVP AVP (AVP Code 279) is of type Grouped and provides +%% debugging information in cases where a request is rejected or not +%% fully processed due to erroneous information in a specific AVP. The +%% value of the Result-Code AVP will provide information on the reason +%% for the Failed-AVP AVP. A Diameter answer message SHOULD contain an +%% instance of the Failed-AVP AVP that corresponds to the error +%% indicated by the Result-Code AVP. For practical purposes, this +%% Failed-AVP would typically refer to the first AVP processing error +%% that a Diameter node encounters. + +select_error(Msg, Es, Dict0) -> + {RC, Avps} = lists:foldl(fun(T,A) -> select(T, A, Dict0) end, + {is_answer_message(Msg, Dict0), []}, + Es), + {RC, lists:reverse(Avps)}. + +%% Only integer() and {integer(), #diameter_avp{}} are the result of +%% decode. #diameter_avp{} can only be set in a reply for encode. + +select(#diameter_avp{} = A, {RC, As}, _) -> + {RC, [A|As]}; + +select(_, {RC, _} = Acc, _) + when is_integer(RC) -> + Acc; -pacc({RC, #diameter_avp{} = A}, {E3, E5, Acc}) +select({RC, #diameter_avp{} = A}, {IsAns, As} = Acc, Dict0) when is_integer(RC) -> - pacc(RC, {E3, E5, [A|Acc]}); + case is_result(RC, IsAns, Dict0) of + true -> {RC, [A|As]}; + false -> Acc + end; -pacc(#diameter_avp{} = A, {E3, E5, Acc}) -> - {E3, E5, [A|Acc]}; +select(RC, {IsAns, As} = Acc, Dict0) + when is_boolean(IsAns), is_integer(RC) -> + case is_result(RC, IsAns, Dict0) of + true -> {RC, As}; + false -> Acc + end. -pacc(RC, {false, E5, Acc}) - when 3 == RC div 1000 -> - {RC, E5, Acc}; +%% reset/4 -pacc(RC, {E3, false, Acc}) - when 5 == RC div 1000 -> - {E3, RC, Acc}; +reset(Msg, Dict, RC, Avps) -> + FailedAVP = failed_avp(Msg, Avps, Dict), + ResultCode = rc(Msg, RC, Dict), + set(set(Msg, FailedAVP, Dict), ResultCode, Dict). -pacc(_, Acc) -> - Acc. +%% eval_packet/2 eval_packet(Pkt, Fs) -> lists:foreach(fun(F) -> diameter_lib:eval([F,Pkt]) end, Fs). @@ -725,29 +740,34 @@ set(Rec, Avps, Dict) -> %% the arity is 1 or {0,1}. In other cases (which probably shouldn't %% exist in practise) we can't know what's appropriate. -rc([MsgName | _], {'Result-Code' = K, RC} = T, Dict) -> - case Dict:avp_arity(MsgName, 'Result-Code') of - 1 -> [T]; +rc(_, B, _) + when is_boolean(B) -> + []; + +rc([MsgName | _], RC, Dict) -> + K = 'Result-Code', + case Dict:avp_arity(MsgName, K) of + 1 -> [{K, RC}]; {0,1} -> [{K, [RC]}]; _ -> [] end; -rc(Rec, T, Dict) -> - rc([Dict:rec2msg(element(1, Rec))], T, Dict). +rc(Rec, RC, Dict) -> + rc([Dict:rec2msg(element(1, Rec))], RC, Dict). %% failed_avp/3 failed_avp(_, [] = No, _) -> No; -failed_avp(Rec, Failed, Dict) -> - [fa(Rec, [{'AVP', Failed}], Dict)]. +failed_avp(Rec, Avps, Dict) -> + [failed(Rec, [{'AVP', Avps}], Dict)]. %% Reply as name and tuple list ... -fa([MsgName | Values], FailedAvp, Dict) -> - R = Dict:msg2rec(MsgName), +failed([MsgName | Values], FailedAvp, Dict) -> + RecName = Dict:msg2rec(MsgName), try - Dict:'#info-'(R, {index, 'Failed-AVP'}), + Dict:'#info-'(RecName, {index, 'Failed-AVP'}), {'Failed-AVP', [FailedAvp]} catch error: _ -> @@ -758,8 +778,10 @@ fa([MsgName | Values], FailedAvp, Dict) -> end; %% ... or record. -fa(Rec, FailedAvp, Dict) -> +failed(Rec, FailedAvp, Dict) -> try + RecName = element(1, Rec), + Dict:'#info-'(RecName, {index, 'Failed-AVP'}), {'Failed-AVP', [FailedAvp]} catch error: _ -> @@ -838,12 +860,14 @@ fa(Rec, FailedAvp, Dict) -> %% answer_message/5 -answer_message(OH, OR, RC, Dict0, Avps) -> +answer_message(OH, OR, RC, Dict0, #diameter_packet{avps = Avps, + errors = Es}) -> {Code, _, Vid} = Dict0:avp_header('Session-Id'), ['answer-message', {'Origin-Host', OH}, {'Origin-Realm', OR}, - {'Result-Code', RC} - | session_id(Code, Vid, Dict0, Avps)]. + {'Result-Code', RC}] + ++ session_id(Code, Vid, Dict0, Avps) + ++ failed_avp(RC, Es). session_id(Code, Vid, Dict0, Avps) when is_list(Avps) -> @@ -855,6 +879,15 @@ session_id(Code, Vid, Dict0, Avps) [] end. +%% Note that this should only match 5xxx result codes currently but +%% don't bother distinguishing this case. +failed_avp(RC, [{RC, Avp} | _]) -> + [{'Failed-AVP', [{'AVP', [Avp]}]}]; +failed_avp(RC, [_ | Es]) -> + failed_avp(RC, Es); +failed_avp(_, [] = No) -> + No. + %% find_avp/3 find_avp(Code, Vid, Avps) diff --git a/lib/diameter/src/base/diameter_watchdog.erl b/lib/diameter/src/base/diameter_watchdog.erl index 41c493ff20..88ccf630e2 100644 --- a/lib/diameter/src/base/diameter_watchdog.erl +++ b/lib/diameter/src/base/diameter_watchdog.erl @@ -505,7 +505,9 @@ set_watchdog(#watchdog{tw = TwInit, tref = TRef} = S) -> cancel(TRef), - S#watchdog{tref = erlang:start_timer(tw(TwInit), self(), tw)}. + S#watchdog{tref = erlang:start_timer(tw(TwInit), self(), tw)}; +set_watchdog(stop = No) -> + No. cancel(undefined) -> ok; diff --git a/lib/diameter/src/compiler/diameter_codegen.erl b/lib/diameter/src/compiler/diameter_codegen.erl index 80036879ea..e687145263 100644 --- a/lib/diameter/src/compiler/diameter_codegen.erl +++ b/lib/diameter/src/compiler/diameter_codegen.erl @@ -574,12 +574,12 @@ cs_enumerated_avp({AvpName, Values}) -> lists:flatmap(fun(V) -> c_enumerated_avp(AvpName, V) end, Values). c_enumerated_avp(AvpName, {_,I}) -> - [{?clause, [?ATOM(decode), ?Atom(AvpName), ?TERM(<<I:32/integer>>)], + [{?clause, [?ATOM(decode), ?Atom(AvpName), ?TERM(<<I:32>>)], [], [?TERM(I)]}, {?clause, [?ATOM(encode), ?Atom(AvpName), ?INTEGER(I)], [], - [?TERM(<<I:32/integer>>)]}]. + [?TERM(<<I:32>>)]}]. %%% ------------------------------------------------------------------------ %%% msg_header/1 @@ -700,7 +700,7 @@ c_empty_value({Name, _, _, _}) -> c_empty_value({Name, _}) -> {?clause, [?Atom(Name)], [], - [?TERM(<<0:32/integer>>)]}. + [?TERM(<<0:32>>)]}. %%% ------------------------------------------------------------------------ %%% # dict/0 diff --git a/lib/diameter/test/diameter_3xxx_SUITE.erl b/lib/diameter/test/diameter_3xxx_SUITE.erl index 89c78d8b57..071b1a1177 100644 --- a/lib/diameter/test/diameter_3xxx_SUITE.erl +++ b/lib/diameter/test/diameter_3xxx_SUITE.erl @@ -40,9 +40,10 @@ send_unknown_application/1, send_unknown_command/1, send_ok/1, - send_invalid_avp_bits/1, + send_invalid_hdr_bits/1, send_missing_avp/1, send_ignore_missing_avp/1, + send_5xxx_missing_avp/1, send_double_error/1, send_3xxx/1, send_5xxx/1, @@ -136,9 +137,10 @@ tc() -> [send_unknown_application, send_unknown_command, send_ok, - send_invalid_avp_bits, + send_invalid_hdr_bits, send_missing_avp, send_ignore_missing_avp, + send_5xxx_missing_avp, send_double_error, send_3xxx, send_5xxx]. @@ -216,27 +218,26 @@ send_ok([_,_]) -> send_ok(Config) -> send_ok(?group(Config)). -%% send_invalid_avp_bits/1 +%% send_invalid_hdr_bits/1 %% -%% Send a request with an incorrect length on the optional -%% Origin-State-Id that a callback ignores. +%% Send a request with an incorrect E-bit that a callback ignores. %% Callback answers. -send_invalid_avp_bits([callback, _]) -> +send_invalid_hdr_bits([callback, _]) -> #diameter_base_STA{'Result-Code' = 2001, %% SUCCESS 'Failed-AVP' = [], 'AVP' = []} = call(); %% diameter answers. -send_invalid_avp_bits([_,_]) -> - #'diameter_base_answer-message'{'Result-Code' = 3009, %% INVALID_AVP_BITS +send_invalid_hdr_bits([_,_]) -> + #'diameter_base_answer-message'{'Result-Code' = 3008, %% INVALID_HDR_BITS 'Failed-AVP' = [], 'AVP' = []} = call(); -send_invalid_avp_bits(Config) -> - send_invalid_avp_bits(?group(Config)). +send_invalid_hdr_bits(Config) -> + send_invalid_hdr_bits(?group(Config)). %% send_missing_avp/1 %% @@ -280,10 +281,35 @@ send_ignore_missing_avp([_,_]) -> send_ignore_missing_avp(Config) -> send_ignore_missing_avp(?group(Config)). +%% send_5xxx_missing_avp/1 +%% +%% Send a request with a missing AVP that a callback answers +%% with {answer_message, 5005}. + +%% RFC 6733 allows 5xxx in an answer-message. +send_5xxx_missing_avp([_, rfc6733]) -> + #'diameter_base_answer-message'{'Result-Code' = 5005, %% MISSING_AVP + 'Failed-AVP' = [_], + 'AVP' = []} + = call(); + +%% RFC 3588 doesn't: sending answer fails. +send_5xxx_missing_avp([_, rfc3588]) -> + {error, timeout} = call(); + +%% Callback answers, ignores the error +send_5xxx_missing_avp([_,_]) -> + #diameter_base_STA{'Result-Code' = 2001, %% SUCCESS + 'Failed-AVP' = [], + 'AVP' = []} + = call(); + +send_5xxx_missing_avp(Config) -> + send_5xxx_missing_avp(?group(Config)). + %% send_double_error/1 %% -%% Send a request with both an incorrect length on the optional -%% Origin-State-Id and a missing AVP. +%% Send a request with both an invalid E-bit and a missing AVP. %% Callback answers with STA. send_double_error([callback, _]) -> @@ -294,8 +320,8 @@ send_double_error([callback, _]) -> %% diameter answers with answer-message. send_double_error([_,_]) -> - #'diameter_base_answer-message'{'Result-Code' = 3009, %% INVALID_AVP_BITS - 'Failed-AVP' = [_], + #'diameter_base_answer-message'{'Result-Code' = 3008, %% INVALID_HDR_BITS + 'Failed-AVP' = [], 'AVP' = []} = call(); @@ -392,24 +418,21 @@ prepare(Pkt, Caps, T) T == send_5xxx -> sta(Pkt, Caps); -prepare(Pkt0, Caps, send_invalid_avp_bits) -> - Req0 = sta(Pkt0, Caps), - %% Append an Origin-State-Id with an incorrect AVP Length in order - %% to force 3009. - Req = Req0#diameter_base_STR{'Origin-State-Id' = [7]}, - #diameter_packet{bin = Bin} +prepare(Pkt0, Caps, send_invalid_hdr_bits) -> + Req = sta(Pkt0, Caps), + %% Set the E-bit to force 3008. + #diameter_packet{bin = <<H:34, 0:1, T/bitstring>>} = Pkt = diameter_codec:encode(?DICT, Pkt0#diameter_packet{msg = Req}), - Offset = size(Bin) - 12 + 5, - <<H:Offset/binary, Len:24, T/binary>> = Bin, - Pkt#diameter_packet{bin = <<H/binary, (Len + 2):24, T/binary>>}; + Pkt#diameter_packet{bin = <<H:34, 1:1, T/bitstring>>}; prepare(Pkt0, Caps, send_double_error) -> - dehost(prepare(Pkt0, Caps, send_invalid_avp_bits)); + dehost(prepare(Pkt0, Caps, send_invalid_hdr_bits)); prepare(Pkt, Caps, T) when T == send_missing_avp; - T == send_ignore_missing_avp -> + T == send_ignore_missing_avp; + T == send_5xxx_missing_avp -> Req = sta(Pkt, Caps), dehost(diameter_codec:encode(?DICT, Pkt#diameter_packet{msg = Req})). @@ -480,9 +503,7 @@ request(send_3xxx, _Req, _Caps) -> request(send_5xxx, _Req, _Caps) -> {answer_message, 5999}; -request(send_invalid_avp_bits, Req, Caps) -> - #diameter_base_STR{'Origin-State-Id' = []} - = Req, +request(send_invalid_hdr_bits, Req, Caps) -> %% Default errors field but a non-answer-message and only 3xxx %% errors detected means diameter sets neither Result-Code nor %% Failed-AVP. @@ -495,7 +516,10 @@ request(T, Req, Caps) request(send_ignore_missing_avp, Req, Caps) -> {reply, #diameter_packet{msg = answer(Req, Caps), - errors = false}}. %% ignore errors + errors = false}}; %% ignore errors + +request(send_5xxx_missing_avp, _Req, _Caps) -> + {answer_message, 5005}. %% MISSING_AVP answer(Req, Caps) -> #diameter_base_STR{'Session-Id' = SId} diff --git a/lib/diameter/test/diameter_app_SUITE.erl b/lib/diameter/test/diameter_app_SUITE.erl index 209f72adf1..1e262895a6 100644 --- a/lib/diameter/test/diameter_app_SUITE.erl +++ b/lib/diameter/test/diameter_app_SUITE.erl @@ -56,7 +56,7 @@ %% =========================================================================== suite() -> - [{timetrap, {seconds, 10}}]. + [{timetrap, {seconds, 60}}]. all() -> [keys, diff --git a/lib/diameter/test/diameter_codec_SUITE_data/diameter_test_unknown.erl b/lib/diameter/test/diameter_codec_SUITE_data/diameter_test_unknown.erl index bce3d78a37..49f2158b1a 100644 --- a/lib/diameter/test/diameter_codec_SUITE_data/diameter_test_unknown.erl +++ b/lib/diameter/test/diameter_codec_SUITE_data/diameter_test_unknown.erl @@ -71,6 +71,6 @@ dec('AR', #diameter_packet dec('BR', #diameter_packet {msg = #recv_BR{'Origin-Host' = ?HOST, 'Origin-Realm' = ?REALM}, - errors = [{5008, ?NOT_MANDATORY_YYY}, - {5001, ?MANDATORY_XXX}]}) -> + errors = [{5001, ?MANDATORY_XXX}, + {5008, ?NOT_MANDATORY_YYY}]}) -> ok. diff --git a/lib/diameter/test/diameter_codec_test.erl b/lib/diameter/test/diameter_codec_test.erl index 0baac59c1a..24d4c7665e 100644 --- a/lib/diameter/test/diameter_codec_test.erl +++ b/lib/diameter/test/diameter_codec_test.erl @@ -265,7 +265,7 @@ arity(M, Name, AvpName, Rec) -> %% enum/3 enum(M, Name, {_,E}) -> - B = <<E:32/integer>>, + B = <<E:32>>, B = M:avp(encode, E, Name), E = M:avp(decode, B, Name). @@ -322,15 +322,15 @@ values('Unsigned64') -> values('Float32') -> E = (1 bsl 8) - 2, F = (1 bsl 23) - 1, - <<Mx:32/float>> = <<0:1/integer, E:8/integer, F:23/integer>>, - <<Mn:32/float>> = <<1:1/integer, E:8/integer, F:23/integer>>, + <<Mx:32/float>> = <<0:1, E:8, F:23>>, + <<Mn:32/float>> = <<1:1, E:8, F:23>>, {[0.0, infinity, '-infinity', Mx, Mn], [0]}; values('Float64') -> E = (1 bsl 11) - 2, F = (1 bsl 52) - 1, - <<Mx:64/float>> = <<0:1/integer, E:11/integer, F:52/integer>>, - <<Mn:64/float>> = <<1:1/integer, E:11/integer, F:52/integer>>, + <<Mx:64/float>> = <<0:1, E:11, F:52>>, + <<Mn:64/float>> = <<1:1, E:11, F:52>>, {[0.0, infinity, '-infinity', Mx, Mn], [0]}; values('Address') -> diff --git a/lib/diameter/test/diameter_distribution_SUITE.erl b/lib/diameter/test/diameter_distribution_SUITE.erl index 01d3507b27..f069abbe2f 100644 --- a/lib/diameter/test/diameter_distribution_SUITE.erl +++ b/lib/diameter/test/diameter_distribution_SUITE.erl @@ -28,7 +28,7 @@ all/0]). %% testcases --export([enslave/1, +-export([enslave/1, enslave/0, ping/1, start/1, connect/1, @@ -36,7 +36,7 @@ send_remote/1, send_timeout/1, send_failover/1, - stop/1]). + stop/1, stop/0]). %% diameter callbacks -export([peer_up/3, @@ -126,6 +126,9 @@ all() -> %% Start four slave nodes, one to implement a Diameter server, %% two three to implement a client. +enslave() -> + [{timetrap, {seconds, 30*length(?NODES)}}]. + enslave(Config) -> Here = filename:dirname(code:which(?MODULE)), Ebin = filename:join([Here, "..", "ebin"]), @@ -225,6 +228,9 @@ connect(Config) -> %% %% Stop the slave nodes. +stop() -> + [{timetrap, {seconds, 30*length(?NODES)}}]. + stop(_Config) -> [] = [{N,E} || {N,_} <- ?NODES, {error, _, _} = E <- [ct_slave:stop(N)]]. diff --git a/lib/diameter/test/diameter_examples_SUITE.erl b/lib/diameter/test/diameter_examples_SUITE.erl index 585fc9d3b8..1954bc319b 100644 --- a/lib/diameter/test/diameter_examples_SUITE.erl +++ b/lib/diameter/test/diameter_examples_SUITE.erl @@ -29,6 +29,7 @@ %% testcases -export([dict/1, dict/0, code/1, + slave/1, slave/0, enslave/1, start/1, traffic/1, @@ -65,11 +66,12 @@ %% =========================================================================== suite() -> - [{timetrap, {seconds, 45}}]. + [{timetrap, {minutes, 2}}]. all() -> [dict, code, + slave, enslave, start, traffic, @@ -250,6 +252,29 @@ store(Path, Dict) -> %% =========================================================================== +%% slave/1 +%% +%% Return how long slave start/stop is taking since it seems to be +%% ridiculously long on some hosts. + +slave() -> + [{timetrap, {minutes, 10}}]. + +slave(_) -> + T0 = now(), + {ok, Node} = ct_slave:start(?MODULE, ?TIMEOUTS), + T1 = now(), + T2 = rpc:call(Node, erlang, now, []), + {ok, Node} = ct_slave:stop(?MODULE), + now_diff([T0, T1, T2, now()]). + +now_diff([T1,T2|_] = Ts) -> + [timer:now_diff(T2,T1) | now_diff(tl(Ts))]; +now_diff(_) -> + []. + +%% =========================================================================== + %% enslave/1 %% %% Start two nodes: one for the server, one for the client. diff --git a/lib/diameter/test/diameter_gen_tcp_SUITE.erl b/lib/diameter/test/diameter_gen_tcp_SUITE.erl new file mode 100644 index 0000000000..7e232edb44 --- /dev/null +++ b/lib/diameter/test/diameter_gen_tcp_SUITE.erl @@ -0,0 +1,106 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2013. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%% +%% Some gen_sctp-specific tests demonstrating problems that were +%% encountered during diameter development but have nothing +%% specifically to do with diameter. At least one of them can cause +%% diameter_traffic_SUITE testcases to fail. +%% + +-module(diameter_gen_tcp_SUITE). + +-export([suite/0, + all/0]). + +%% testcases +-export([send_long/1]). + +-define(LOOPBACK, {127,0,0,1}). +-define(GEN_OPTS, [binary, {active, true}, {ip, ?LOOPBACK}]). + +%% =========================================================================== + +suite() -> + [{timetrap, {minutes, 2}}]. + +all() -> + [send_long]. + +%% =========================================================================== + +%% send_long/1 +%% +%% Test that a long message is received. + +send_long(_) -> + {Sock, SendF} = connection(), + B = list_to_binary(lists:duplicate(1 bsl 20, $X)), + ok = SendF(B), + B = recv(Sock, size(B), []). + +recv(_, 0, Acc) -> + list_to_binary(lists:reverse(Acc)); +recv(Sock, N, Acc) -> + receive + {tcp, Sock, Bin} -> + recv(Sock, N - size(Bin), [Bin | Acc]); + T -> + {T, Acc} + end. + +%% connection/0 + +connection() -> + {ok, LSock} = gen_tcp:listen(0, ?GEN_OPTS), + {ok, PortNr} = inet:port(LSock), + LPid = self(), + {Pid, MRef} = spawn_monitor(fun() -> connect(PortNr, LPid) end), + {ok, Sock} = gen_tcp:accept(LSock), + receive + {Pid, F} -> + {Sock, F}; + {'DOWN', MRef, process, _, _} = T -> + T + end. + +%% connect/2 + +connect(PortNr, LPid) -> + {ok, Sock} = gen_tcp:connect(?LOOPBACK, PortNr, ?GEN_OPTS), + LPid ! {self(), fun(B) -> send(Sock, B) end}, + down(LPid). + +%% down/1 + +down(Pid) + when is_pid(Pid) -> + down(erlang:monitor(process, Pid)); + +down(MRef) -> + receive {'DOWN', MRef, process, _, Reason} -> Reason end. + +%% send/2 +%% +%% Send from a spawned process just to avoid sending from the +%% receiving process, in case it's significant. + +send(Sock, Bin) -> + {_, MRef} = spawn_monitor(fun() -> exit(gen_tcp:send(Sock, Bin)) end), + down(MRef). diff --git a/lib/diameter/test/diameter_tls_SUITE.erl b/lib/diameter/test/diameter_tls_SUITE.erl index 5a79c63d36..55565692ec 100644 --- a/lib/diameter/test/diameter_tls_SUITE.erl +++ b/lib/diameter/test/diameter_tls_SUITE.erl @@ -181,7 +181,7 @@ start_diameter(_Config) -> ok = diameter:start(). make_certs() -> - [{timetrap, {seconds, 30}}]. + [{timetrap, {minutes, 2}}]. make_certs(Config) -> Dir = proplists:get_value(priv_dir, Config), @@ -302,9 +302,7 @@ set([H|T], Vs) -> disconnect({{LRef, _PortNr}, CRef}) -> ok = diameter:remove_transport(?CLIENT, CRef), - ok = receive #diameter_event{info = {down, LRef, _, _}} -> ok - after 2000 -> false - end. + receive #diameter_event{info = {down, LRef, _, _}} -> ok end. realm(Host) -> tl(lists:dropwhile(fun(C) -> C /= $. end, Host)). @@ -365,13 +363,11 @@ ssl([{ssl_options = T, Opts}]) -> connect(Host, {_LRef, PortNr}, {Caps, Opts}) -> {ok, Ref} = diameter:add_transport(Host, ?CONNECT(PortNr, Caps, Opts)), - ok = receive - #diameter_event{service = Host, - info = {up, Ref, _, _, #diameter_packet{}}} -> - ok - after 2000 -> - false - end, + receive + #diameter_event{service = Host, + info = {up, Ref, _, _, #diameter_packet{}}} -> + ok + end, Ref. copts(S, Opts) diff --git a/lib/diameter/test/diameter_traffic_SUITE.erl b/lib/diameter/test/diameter_traffic_SUITE.erl index 781ed234cc..38bdf55af8 100644 --- a/lib/diameter/test/diameter_traffic_SUITE.erl +++ b/lib/diameter/test/diameter_traffic_SUITE.erl @@ -49,9 +49,12 @@ send_unsupported_app/1, send_error_bit/1, send_unsupported_version/1, - send_invalid_avp_bits/1, + send_long_avp_length/1, + send_short_avp_length/1, + send_zero_avp_length/1, send_invalid_avp_length/1, send_invalid_reject/1, + send_unrecognized_mandatory/1, send_long/1, send_nopeer/1, send_noapp/1, @@ -268,9 +271,12 @@ tc() -> send_unsupported_app, send_error_bit, send_unsupported_version, - send_invalid_avp_bits, + send_long_avp_length, + send_short_avp_length, + send_zero_avp_length, send_invalid_avp_length, send_invalid_reject, + send_unrecognized_mandatory, send_long, send_nopeer, send_noapp, @@ -405,7 +411,7 @@ send_eval(Config) -> send_bad_answer(Config) -> Req = ['ACR', {'Accounting-Record-Type', ?EVENT_RECORD}, {'Accounting-Record-Number', 2}], - {error, timeout} = call(Config, Req). + {timeout, _} = call(Config, Req). %% Send an ACR that the server callback answers explicitly with a %% protocol error. @@ -416,13 +422,14 @@ send_protocol_error(Config) -> ?answer_message(?TOO_BUSY) = call(Config, Req). -%% Send an ASR with an arbitrary AVP and expect success and the same -%% AVP in the reply. +%% Send an ASR with an arbitrary non-mandatory AVP and expect success +%% and the same AVP in the reply. send_arbitrary(Config) -> - Req = ['ASR', {'AVP', [#diameter_avp{name = 'Class', value = "XXX"}]}], + Req = ['ASR', {'AVP', [#diameter_avp{name = 'Product-Name', + value = "XXX"}]}], ['ASA', _SessionId, {'Result-Code', ?SUCCESS} | Avps] = call(Config, Req), - {'AVP', [#diameter_avp{name = 'Class', + {'AVP', [#diameter_avp{name = 'Product-Name', value = "XXX"}]} = lists:last(Avps). @@ -455,7 +462,7 @@ send_unknown_mandatory(Config) -> %% Send an STR that the server ignores. send_noreply(Config) -> Req = ['STR', {'Termination-Cause', ?BAD_ANSWER}], - {error, timeout} = call(Config, Req). + {timeout, _} = call(Config, Req). %% Send an unsupported command and expect 3001. send_unsupported(Config) -> @@ -481,19 +488,33 @@ send_unsupported_version(Config) -> ['STA', _SessionId, {'Result-Code', ?UNSUPPORTED_VERSION} | _] = call(Config, Req). -%% Send a request containing an incorrect AVP length. -send_invalid_avp_bits(Config) -> - Req = ['STR', {'Termination-Cause', ?LOGOUT}], +%% Send a request containing an AVP length > data size. +send_long_avp_length(Config) -> + send_invalid_avp_length(Config). - ?answer_message(?INVALID_AVP_BITS) - = call(Config, Req). +%% Send a request containing an AVP length < data size. +send_short_avp_length(Config) -> + send_invalid_avp_length(Config). + +%% Send a request containing an AVP whose advertised length is < 8. +send_zero_avp_length(Config) -> + send_invalid_avp_length(Config). %% Send a request containing an AVP length that doesn't match the %% AVP's type. send_invalid_avp_length(Config) -> Req = ['STR', {'Termination-Cause', ?LOGOUT}], - ['STA', _SessionId, {'Result-Code', ?INVALID_AVP_LENGTH} | _] + ['STA', _SessionId, + {'Result-Code', ?INVALID_AVP_LENGTH}, + _OriginHost, + _OriginRealm, + _UserName, + _Class, + _ErrorMessage, + _ErrorReportingHost, + {'Failed-AVP', [#'diameter_base_Failed-AVP'{'AVP' = [_]}]} + | _] = call(Config, Req). %% Send a request containing 5xxx errors that the server rejects with @@ -504,6 +525,14 @@ send_invalid_reject(Config) -> ?answer_message(?TOO_BUSY) = call(Config, Req). +%% Send an STR containing a known AVP, but one that's not allowed and +%% sets the M-bit. +send_unrecognized_mandatory(Config) -> + Req = ['STR', {'Termination-Cause', ?LOGOUT}], + + ['STA', _SessionId, {'Result-Code', ?AVP_UNSUPPORTED} | _] + = call(Config, Req). + %% Send something long that will be fragmented by TCP. send_long(Config) -> Req = ['STR', {'Termination-Cause', ?LOGOUT}, @@ -552,7 +581,7 @@ send_all_2(Config) -> %% Timeout before the server manages an answer. send_timeout(Config) -> Req = ['RAR', {'Re-Auth-Request-Type', ?AUTHORIZE_ONLY}], - {error, timeout} = call(Config, Req, [{timeout, 1000}]). + {timeout, _} = call(Config, Req, [{timeout, 1000}]). %% Explicitly answer with an answer-message and ensure that we %% received the Session-Id. @@ -560,7 +589,7 @@ send_error(Config) -> Req = ['RAR', {'Re-Auth-Request-Type', ?AUTHORIZE_AUTHENTICATE}], ?answer_message(SId, ?TOO_BUSY) = call(Config, Req), - undefined /= SId. + true = undefined /= SId. %% Send a request with the detached option and receive it as a message %% from handle_answer instead. @@ -568,7 +597,7 @@ send_detach(Config) -> Req = ['STR', {'Termination-Cause', ?LOGOUT}], Ref = make_ref(), ok = call(Config, Req, [{extra, [{self(), Ref}]}, detach]), - Ans = receive {Ref, T} -> T after 2000 -> false end, + Ans = receive {Ref, T} -> T end, ['STA', _SessionId, {'Result-Code', ?SUCCESS} | _] = Ans. @@ -683,7 +712,7 @@ call(Config, Req, Opts) -> diameter:call(?CLIENT, dict(Req, Dict0), msg(Req, ReqEncoding, Dict0), - [{extra, [Name, Group]} | Opts]). + [{extra, [{Name, Group}, now()]} | Opts]). origin({A,C}) -> 2*codec(A) + container(C); @@ -767,14 +796,14 @@ peer_down(_SvcName, _Peer, State) -> %% pick_peer/6-7 -pick_peer(Peers, _, ?CLIENT, _State, Name, Group) +pick_peer(Peers, _, ?CLIENT, _State, {Name, Group}, _) when Name /= send_detach -> find(Group, Peers). -pick_peer(_Peers, _, ?CLIENT, _State, send_nopeer, _, ?EXTRA) -> +pick_peer(_Peers, _, ?CLIENT, _State, {send_nopeer, _}, _, ?EXTRA) -> false; -pick_peer(Peers, _, ?CLIENT, _State, send_detach, Group, {_,_}) -> +pick_peer(Peers, _, ?CLIENT, _State, {send_detach, Group}, _, {_,_}) -> find(Group, Peers). find(#group{server_encoding = A, server_container = C}, Peers) -> @@ -789,13 +818,13 @@ id(Id, {Pid, _Caps}) -> %% prepare_request/5-6 -prepare_request(_Pkt, ?CLIENT, {_Ref, _Caps}, send_discard, _) -> +prepare_request(_Pkt, ?CLIENT, {_Ref, _Caps}, {send_discard, _}, _) -> {discard, unprepared}; -prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, Name, Group) -> +prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, {Name, Group}, _) -> {send, prepare(Pkt, Caps, Name, Group)}. -prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, send_detach, Group, _) -> +prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, {send_detach, Group}, _, _) -> {eval_packet, {send, prepare(Pkt, Caps, Group)}, [fun log/2, detach]}. log(#diameter_packet{bin = Bin} = P, T) @@ -804,45 +833,63 @@ log(#diameter_packet{bin = Bin} = P, T) %% prepare/4 -prepare(Pkt, Caps, send_invalid_avp_bits, #group{client_dict0 = Dict0} - = Group) -> +prepare(Pkt, Caps, N, #group{client_dict0 = Dict0} = Group) + when N == send_long_avp_length; + N == send_short_avp_length; + N == send_zero_avp_length -> Req = prepare(Pkt, Caps, Group), - %% Last AVP in our STR is Termination-Cause of type Unsigned32: - %% set its length improperly. + %% Second last AVP in our STR is Auth-Application-Id of type + %% Unsigned32: set AVP Length to a value other than 12 and place + %% it last in the message (so as not to mess with Termination-Cause). #diameter_packet{header = #diameter_header{length = L}, bin = B} = E = diameter_codec:encode(Dict0, Pkt#diameter_packet{msg = Req}), - Offset = L - 7, %% to AVP Length - <<H:Offset/binary, 12:24/integer, T:4/binary>> = B, - E#diameter_packet{bin = <<H/binary, 13:24/integer, T/binary>>}; + Offset = L - 24, %% to Auth-Application-Id + <<H:Offset/binary, + Hdr:5/binary, 12:24, Data:4/binary, + T:12/binary>> + = B, + AL = case N of + send_long_avp_length -> 13; + send_short_avp_length -> 11; + send_zero_avp_length -> 0 + end, + E#diameter_packet{bin = <<H/binary, + T/binary, + Hdr/binary, AL:24, Data/binary>>}; prepare(Pkt, Caps, N, #group{client_dict0 = Dict0} = Group) when N == send_invalid_avp_length; N == send_invalid_reject -> Req = prepare(Pkt, Caps, Group), %% Second last AVP in our STR is Auth-Application-Id of type - %% Unsigned32: Send a value of length 8. + %% Unsigned32: send data of length 8. #diameter_packet{header = #diameter_header{length = L}, bin = B0} = E = diameter_codec:encode(Dict0, Pkt#diameter_packet{msg = Req}), Offset = L - 7 - 12, %% to AVP Length - <<H0:Offset/binary, 12:24/integer, T:16/binary>> = B0, - <<V, L:24/integer, H/binary>> = H0, %% assert - E#diameter_packet{bin = <<V, - (L+4):24/integer, - H/binary, - 16:24/integer, - 0:32/integer, - T/binary>>}; + <<H0:Offset/binary, 12:24, T:16/binary>> = B0, + <<V, L:24, H/binary>> = H0, %% assert + E#diameter_packet{bin = <<V, (L+4):24, H/binary, 16:24, 0:32, T/binary>>}; + +prepare(Pkt, Caps, send_unrecognized_mandatory, #group{client_dict0 = Dict0} + = Group) -> + Req = prepare(Pkt, Caps, Group), + #diameter_packet{bin = <<V, Len:24, T/binary>>} + = E + = diameter_codec:encode(Dict0, Pkt#diameter_packet{msg = Req}), + {Code, Flags, undefined} = Dict0:avp_header('Proxy-State'), + Avp = <<Code:32, Flags, 8:24>>, + E#diameter_packet{bin = <<V, (Len+8):24, T/binary, Avp/binary>>}; prepare(Pkt, Caps, send_unsupported, #group{client_dict0 = Dict0} = Group) -> Req = prepare(Pkt, Caps, Group), #diameter_packet{bin = <<H:5/binary, _CmdCode:3/binary, T/binary>>} = E = diameter_codec:encode(Dict0, Pkt#diameter_packet{msg = Req}), - E#diameter_packet{bin = <<H/binary, 42:24/integer, T/binary>>}; + E#diameter_packet{bin = <<H/binary, 42:24, T/binary>>}; prepare(Pkt, Caps, send_unsupported_app, #group{client_dict0 = Dict0} = Group) -> @@ -850,7 +897,7 @@ prepare(Pkt, Caps, send_unsupported_app, #group{client_dict0 = Dict0} #diameter_packet{bin = <<H:8/binary, _ApplId:4/binary, T/binary>>} = E = diameter_codec:encode(Dict0, Pkt#diameter_packet{msg = Req}), - E#diameter_packet{bin = <<H/binary, ?BAD_APP:32/integer, T/binary>>}; + E#diameter_packet{bin = <<H/binary, ?BAD_APP:32, T/binary>>}; prepare(Pkt, Caps, send_error_bit, Group) -> #diameter_packet{header = Hdr} = Pkt, @@ -928,10 +975,10 @@ prepare_retransmit(_Pkt, false, _Peer, _Name, _Group) -> %% handle_answer/6-7 -handle_answer(Pkt, Req, ?CLIENT, Peer, Name, Group) -> +handle_answer(Pkt, Req, ?CLIENT, Peer, {Name, Group}, _) -> answer(Pkt, Req, Peer, Name, Group). -handle_answer(Pkt, Req, ?CLIENT, Peer, send_detach = Name, Group, X) -> +handle_answer(Pkt, Req, ?CLIENT, Peer, {send_detach = Name, Group}, _, X) -> {Pid, Ref} = X, Pid ! {Ref, answer(Pkt, Req, Peer, Name, Group)}. @@ -944,7 +991,9 @@ answer(Pkt, Req, _Peer, Name, #group{client_dict0 = Dict0}) -> [Dict:rec2msg(R) | Vs]. answer(Rec, [_|_], N) - when N == send_invalid_avp_bits; + when N == send_long_avp_length; + N == send_short_avp_length; + N == send_zero_avp_length; N == send_invalid_avp_length; N == send_invalid_reject -> Rec; @@ -959,7 +1008,11 @@ app(Req, _, Dict0) -> %% handle_error/6 -handle_error(Reason, _Req, ?CLIENT, _Peer, _Name, _Group) -> +handle_error(timeout = Reason, _Req, ?CLIENT, _Peer, _, Time) -> + Now = now(), + {Reason, {Time, Now, timer:now_diff(Now, Time)}}; + +handle_error(Reason, _Req, ?CLIENT, _Peer, _, _Time) -> {error, Reason}. %% handle_request/3 @@ -1085,7 +1138,6 @@ request(#diameter_base_STR{'Session-Id' = SId}, {'Origin-Host', OH}, {'Origin-Realm', OR}]}; -%% send_error +%% send_error/send_timeout request(#diameter_base_RAR{}, _Caps) -> - receive after 2000 -> ok end, - {protocol_error, ?TOO_BUSY}. + receive after 2000 -> {protocol_error, ?TOO_BUSY} end. diff --git a/lib/diameter/test/modules.mk b/lib/diameter/test/modules.mk index 1a829f8031..4fea62461c 100644 --- a/lib/diameter/test/modules.mk +++ b/lib/diameter/test/modules.mk @@ -38,6 +38,7 @@ MODULES = \ diameter_examples_SUITE \ diameter_failover_SUITE \ diameter_gen_sctp_SUITE \ + diameter_gen_tcp_SUITE \ diameter_length_SUITE \ diameter_reg_SUITE \ diameter_relay_SUITE \ |