diff options
Diffstat (limited to 'lib/diameter')
53 files changed, 3916 insertions, 3604 deletions
diff --git a/lib/diameter/doc/src/diameter.xml b/lib/diameter/doc/src/diameter.xml index d68a78ed6d..2cbe48ecce 100644 --- a/lib/diameter/doc/src/diameter.xml +++ b/lib/diameter/doc/src/diameter.xml @@ -21,7 +21,7 @@ <copyright> <year>2011</year> -<year>2016</year> +<year>2017</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -94,12 +94,12 @@ in this module.</p> <taglist> -<tag><c>Address()</c></tag> -<tag><c>DiameterIdentity()</c></tag> -<tag><c>Grouped()</c></tag> -<tag><c>OctetString()</c></tag> -<tag><c>Time()</c></tag> -<tag><c>Unsigned32()</c></tag> +<tag><c>Address()</c></tag><item/> +<tag><c>DiameterIdentity()</c></tag><item/> +<tag><c>Grouped()</c></tag><item/> +<tag><c>OctetString()</c></tag><item/> +<tag><c>Time()</c></tag><item/> +<tag><c>Unsigned32()</c></tag><item/> <tag><c>UTF8String()</c></tag> <item> <p> @@ -159,8 +159,7 @@ Has one the following types.</p> <p> Unique identifier for the application in the scope of the service. -Defaults to the value of the <c>dictionary</c> option if -unspecified.</p> +Defaults to the value of the <c>dictionary</c> option.</p> </item> <tag><c>{dictionary, atom()}</c></tag> @@ -187,7 +186,7 @@ Initial callback state. The prevailing state is passed to some &man_app; callbacks, which can then return a new state. -Defaults to the value of the <c>alias</c> option if unspecified.</p> +Defaults to the value of the <c>alias</c> option.</p> </item> <tag><c>{call_mutates_state, true|false}</c></tag> @@ -195,7 +194,7 @@ Defaults to the value of the <c>alias</c> option if unspecified.</p> <p> Whether or not the &app_pick_peer; application callback can modify the application state. -Defaults to <c>false</c> if unspecified.</p> +Defaults to <c>false</c>.</p> <warning> <p> @@ -228,7 +227,7 @@ question is as if a callback had taken place and returned <c>{error, failure}</c>.</p> <p> -Defaults to <c>discard</c> if unspecified.</p> +Defaults to <c>discard</c>.</p> </item> <tag><c>{request_errors, answer_3xxx|answer|callback}</c></tag> @@ -249,7 +248,7 @@ place and its return value determines the answer sent to the peer, if any.</p> <p> -Defaults to <c>answer_3xxx</c> if unspecified.</p> +Defaults to <c>answer_3xxx</c>.</p> <note> <p> @@ -301,6 +300,17 @@ corresponding list of filters. Defaults to <c>none</c>.</p> </item> +<tag><c>{peer, &app_peer_ref;}</c></tag> +<item> +<p> +Peer to which the request in question can be sent, preempting the +selection of peers having advertised support for the Diameter +application in question. +Multiple options can be specified, and their order is +respected in the candidate lists passed to a subsequent +&app_pick_peer; callback.</p> +</item> + <tag><c>{timeout, &dict_Unsigned32;}</c></tag> <item> <p> @@ -339,8 +349,8 @@ Has one of the following types.</p> <taglist> -<tag><c>{'Origin-Host', &dict_DiameterIdentity;}</c></tag> -<tag><c>{'Origin-Realm', &dict_DiameterIdentity;}</c></tag> +<tag><c>{'Origin-Host', &dict_DiameterIdentity;}</c></tag><item/> +<tag><c>{'Origin-Realm', &dict_DiameterIdentity;}</c></tag><item/> <tag><c>{'Host-IP-Address', [&dict_Address;]}</c></tag> <item> <p> @@ -352,8 +362,8 @@ question communicates an address list as described in &man_transport;</p> </item> -<tag><c>{'Vendor-Id', &dict_Unsigned32;}</c></tag> -<tag><c>{'Product-Name', &dict_UTF8String;}</c></tag> +<tag><c>{'Vendor-Id', &dict_Unsigned32;}</c></tag><item/> +<tag><c>{'Product-Name', &dict_UTF8String;}</c></tag><item/> <tag><c>{'Origin-State-Id', &dict_Unsigned32;}</c></tag> <item> <p> @@ -366,8 +376,8 @@ can be used as to retrieve a value that is computed when the diameter application is started.</p> </item> -<tag><c>{'Supported-Vendor-Id', [&dict_Unsigned32;]}</c></tag> -<tag><c>{'Auth-Application-Id', [&dict_Unsigned32;]}</c></tag> +<tag><c>{'Supported-Vendor-Id', [&dict_Unsigned32;]}</c></tag><item/> +<tag><c>{'Auth-Application-Id', [&dict_Unsigned32;]}</c></tag><item/> <tag><c>{'Inband-Security-Id', [&dict_Unsigned32;]}</c></tag> <item> <p> @@ -377,9 +387,9 @@ If 1 (TLS) is specified then TLS is selected if the CER/CEA received from the peer offers it.</p> </item> -<tag><c>{'Acct-Application-Id', [&dict_Unsigned32;]}</c></tag> -<tag><c>{'Vendor-Specific-Application-Id', [&dict_Grouped;]}</c></tag> -<tag><c>{'Firmware-Revision', &dict_Unsigned32;}</c></tag> +<tag><c>{'Acct-Application-Id', [&dict_Unsigned32;]}</c></tag><item/> +<tag><c>{'Vendor-Specific-Application-Id', [&dict_Grouped;]}</c></tag><item/> +<tag><c>{'Firmware-Revision', &dict_Unsigned32;}</c></tag><item/> </taglist> @@ -567,9 +577,8 @@ Can have one of the following types.</p> <taglist> -<tag><c>start</c></tag> +<tag><c>start</c></tag><item/> <tag><c>stop</c></tag> - <item> <p> The service is being started or stopped. @@ -578,8 +587,8 @@ No event follows a <c>stop</c> event, and this event implies the termination of all transport processes.</p> </item> -<tag><c>{up, Ref, Peer, Config, Pkt}</c></tag> -<tag><c>{up, Ref, Peer, Config}</c></tag> +<tag><c>{up, Ref, Peer, Config, Pkt}</c></tag><item/> +<tag><c>{up, Ref, Peer, Config}</c></tag><item/> <tag><c>{down, Ref, Peer, Config}</c></tag> <item> <pre> @@ -788,8 +797,8 @@ be matched by corresponding &capability; configuration, of </item> -<marker id="incoming_maxlen"/> -<tag><c>{incoming_maxlen, 0..16777215}</c></tag> +<tag> +<marker id="incoming_maxlen"/><c>{incoming_maxlen, 0..16777215}</c></tag> <item> <p> Bound on the expected size of incoming Diameter messages. @@ -917,8 +926,8 @@ Options <c>monitor</c> and <c>link</c> are ignored.</p> Defaults to the empty list.</p> </item> -<marker id="strict_mbit"/> -<tag><c>{strict_mbit, boolean()}</c></tag> +<tag> +<marker id="strict_mbit"/><c>{strict_mbit, boolean()}</c></tag> <item> <p> Whether or not to regard an AVP setting the M-bit as erroneous when @@ -935,7 +944,7 @@ Defaults to <c>true</c>.</p> <p> RFC 6733 is unclear about the semantics of the M-bit. One the one hand, the CCF specification in section 3.2 documents AVP -in a command grammar as meaning <b>any</b> arbitrary AVP; on the +in a command grammar as meaning <em>any</em> arbitrary AVP; on the other hand, 1.3.4 states that AVPs setting the M-bit cannot be added to an existing command: the modified command must instead be placed in a new Diameter application.</p> @@ -945,7 +954,7 @@ allowing arbitrary AVPs setting the M-bit in a command makes its interpretation implementation-dependent, since there's no guarantee that all implementations will understand the same set of arbitrary AVPs in the context of a given command. -However, interpreting <c>AVP</c> in a command grammar as <b>any</b> +However, interpreting <c>AVP</c> in a command grammar as any AVP, regardless of M-bit, renders 1.3.4 meaningless, since the receiver can simply ignore any AVP it thinks isn't relevant, regardless of the sender's intent.</p> @@ -960,8 +969,8 @@ occur in the message in question.</p> </item> -<marker id="string_decode"/> -<tag><c>{string_decode, boolean()}</c></tag> +<tag> +<marker id="string_decode"/><c>{string_decode, boolean()}</c></tag> <item> <p> Whether or not to decode AVPs of type &dict_OctetString; and its @@ -1031,8 +1040,9 @@ Option passed to &add_transport;. Has one of the following types.</p> <taglist> -<marker id="applications"/> -<tag><c>{applications, [&application_alias;]}</c></tag> + +<tag> +<marker id="applications"/><c>{applications, [&application_alias;]}</c></tag> <item> <p> Diameter applications to which the transport should be restricted. @@ -1050,8 +1060,8 @@ implies having to set matching *-Application-Id AVPs in a </item> -<marker id="capabilities"/> -<tag><c>{capabilities, [&capability;]}</c></tag> +<tag> +<marker id="capabilities"/><c>{capabilities, [&capability;]}</c></tag> <item> <p> AVPs used to construct outgoing CER/CEA messages. @@ -1064,8 +1074,8 @@ may be particularly appropriate for Inband-Security-Id, in case TLS is desired over TCP as implemented by &man_tcp;.</p> </item> -<marker id="capabilities_cb"/> -<tag><c>{capabilities_cb, &evaluable;}</c></tag> +<tag> +<marker id="capabilities_cb"/><c>{capabilities_cb, &evaluable;}</c></tag> <item> <p> Callback invoked upon reception of CER/CEA during capabilities @@ -1112,8 +1122,8 @@ case the corresponding callbacks are applied until either all return <c>ok</c> or one does not.</p> </item> -<marker id="capx_timeout"/> -<tag><c>{capx_timeout, &dict_Unsigned32;}</c></tag> +<tag> +<marker id="capx_timeout"/><c>{capx_timeout, &dict_Unsigned32;}</c></tag> <item> <p> Number of milliseconds after which a transport process having an @@ -1127,8 +1137,8 @@ For a listening transport, the peer determines the timing.</p> Defaults to 10000.</p> </item> -<marker id="connect_timer"/> -<tag><c>{connect_timer, Tc}</c></tag> +<tag> +<marker id="connect_timer"/><c>{connect_timer, Tc}</c></tag> <item> <pre> Tc = &dict_Unsigned32; @@ -1158,9 +1168,8 @@ Defaults to 30000 for a connecting transport and 60000 for a listening transport.</p> </item> -<marker id="disconnect_cb"/> -<tag><c>{disconnect_cb, &evaluable;}</c></tag> - +<tag> +<marker id="disconnect_cb"/><c>{disconnect_cb, &evaluable;}</c></tag> <item> <p> Callback invoked prior to terminating the transport process of a @@ -1236,8 +1245,8 @@ configured them.</p> Defaults to a single callback returning <c>dpr</c>.</p> </item> -<marker id="dpa_timeout"/> -<tag><c>{dpa_timeout, &dict_Unsigned32;}</c></tag> +<tag> +<marker id="dpa_timeout"/><c>{dpa_timeout, &dict_Unsigned32;}</c></tag> <item> <p> Number of milliseconds after which a transport connection is @@ -1247,8 +1256,8 @@ terminated following an outgoing DPR if DPA is not received.</p> Defaults to 1000.</p> </item> -<marker id="dpr_timeout"/> -<tag><c>{dpr_timeout, &dict_Unsigned32;}</c></tag> +<tag> +<marker id="dpr_timeout"/><c>{dpr_timeout, &dict_Unsigned32;}</c></tag> <item> <p> Number of milliseconds after which a transport connection is @@ -1259,8 +1268,8 @@ connection.</p> Defaults to 5000.</p> </item> -<marker id="length_errors"/> -<tag><c>{length_errors, exit|handle|discard}</c></tag> +<tag> +<marker id="length_errors"/><c>{length_errors, exit|handle|discard}</c></tag> <item> <p> How to deal with errors in the Message Length field of the @@ -1308,8 +1317,8 @@ the same peer.</p> </item> -<marker id="spawn_opt"/> -<tag><c>{spawn_opt, [term()]}</c></tag> +<tag> +<marker id="spawn_opt"/><c>{spawn_opt, [term()]}</c></tag> <item> <p> Options passed to &spawn_opt; when spawning a process for an @@ -1320,15 +1329,15 @@ Options <c>monitor</c> and <c>link</c> are ignored.</p> Defaults to the list configured on the service if not specified.</p> </item> -<marker id="transport_config"/> -<tag><c>{transport_config, term()}</c></tag> +<tag> +<marker id="transport_config"/><c>{transport_config, term()}</c></tag><item/> <tag><c>{transport_config, term(), &dict_Unsigned32; | infinity}</c></tag> <item> <p> Term passed as the third argument to the &transport_start; function of the relevant &transport_module; in order to start a transport process. -Defaults to the empty list if unspecified.</p> +Defaults to the empty list.</p> <p> The 3-tuple form additionally specifies an interval, in milliseconds, @@ -1349,12 +1358,12 @@ request a connection with one peer over SCTP or another To listen on both SCTP and TCP, define one transport for each.</p> </item> -<marker id="transport_module"/> -<tag><c>{transport_module, atom()}</c></tag> +<tag> +<marker id="transport_module"/><c>{transport_module, atom()}</c></tag> <item> <p> Module implementing a transport process as defined in &man_transport;. -Defaults to <c>diameter_tcp</c> if unspecified.</p> +Defaults to <c>diameter_tcp</c>.</p> <p> Multiple <c>transport_module</c> and &transport_config; @@ -1369,8 +1378,9 @@ modules in order until one establishes a connection within the corresponding timeout (see below) or all fail.</p> </item> -<marker id="watchdog_config"/> -<tag><c>{watchdog_config, [{okay|suspect, non_neg_integer()}]}</c></tag> +<tag> +<marker id="watchdog_config"/><c>{watchdog_config, + [{okay|suspect, non_neg_integer()}]}</c></tag> <item> <p> Configuration that alters the behaviour of the watchdog @@ -1393,8 +1403,8 @@ misbehaving nodes during test.</p> </warning> </item> -<marker id="watchdog_timer"/> -<tag><c>{watchdog_timer, TwInit}</c></tag> +<tag> +<marker id="watchdog_timer"/><c>{watchdog_timer, TwInit}</c></tag> <item> <pre> TwInit = &dict_Unsigned32; @@ -1412,7 +1422,7 @@ the callback.</p> <p> An integer value must be at least 6000 as required by RFC 3539. -Defaults to 30000 if unspecified.</p> +Defaults to 30000.</p> </item> </taglist> @@ -1422,10 +1432,10 @@ Unrecognized options are silently ignored but are returned unmodified by &service_info; and can be referred to in predicate functions passed to &remove_transport;.</p> -<marker id="transport_ref"/> </item> -<tag><c>transport_ref() = reference()</c></tag> +<tag> +<marker id="transport_ref"/><c>transport_ref() = reference()</c></tag> <item> <p> Reference returned by &add_transport; that @@ -1682,17 +1692,17 @@ returned.</p> <taglist> -<tag><c>'Origin-Host'</c></tag> -<tag><c>'Origin-Realm'</c></tag> -<tag><c>'Vendor-Id'</c></tag> -<tag><c>'Product-Name'</c></tag> -<tag><c>'Origin-State-Id'</c></tag> -<tag><c>'Host-IP-Address'</c></tag> -<tag><c>'Supported-Vendor'</c></tag> -<tag><c>'Auth-Application-Id'</c></tag> -<tag><c>'Inband-Security-Id'</c></tag> -<tag><c>'Acct-Application-Id'</c></tag> -<tag><c>'Vendor-Specific-Application-Id'</c></tag> +<tag><c>'Origin-Host'</c></tag><item/> +<tag><c>'Origin-Realm'</c></tag><item/> +<tag><c>'Vendor-Id'</c></tag><item/> +<tag><c>'Product-Name'</c></tag><item/> +<tag><c>'Origin-State-Id'</c></tag><item/> +<tag><c>'Host-IP-Address'</c></tag><item/> +<tag><c>'Supported-Vendor'</c></tag><item/> +<tag><c>'Auth-Application-Id'</c></tag><item/> +<tag><c>'Inband-Security-Id'</c></tag><item/> +<tag><c>'Acct-Application-Id'</c></tag><item/> +<tag><c>'Vendor-Specific-Application-Id'</c></tag><item/> <tag><c>'Firmware-Revision'</c></tag> <item> <p> diff --git a/lib/diameter/doc/src/diameter_app.xml b/lib/diameter/doc/src/diameter_app.xml index 973b6eb732..dfcd00975b 100644 --- a/lib/diameter/doc/src/diameter_app.xml +++ b/lib/diameter/doc/src/diameter_app.xml @@ -90,17 +90,14 @@ is called in response to an incoming Diameter request message.</p> </list> -</description> - -<note> <p> -The arities given for the the callback functions here assume no extra -arguments. +The arities for the the callback functions here assume no extra arguments. All functions will also be passed any extra arguments configured with the callback module itself when calling &mod_start_service; and, for the call-specific callbacks, any extra arguments passed to &mod_call;.</p> -</note> + +</description> <!-- ===================================================================== --> <!-- ===================================================================== --> @@ -110,9 +107,8 @@ and, for the call-specific callbacks, any extra arguments passed to <taglist> -<marker id="capabilities"/> - -<tag><c>capabilities() = #diameter_caps{}</c></tag> +<tag> +<marker id="capabilities"/><c>capabilities() = #diameter_caps{}</c></tag> <item> <p> A record containing the identities of @@ -126,9 +122,8 @@ Optional or possibly multiple values are encoded as lists of values, mandatory values as the bare value.</p> </item> -<marker id="message"/> - -<tag><c>message() = &codec_message;</c></tag> +<tag> +<marker id="message"/><c>message() = &codec_message;</c></tag> <item> <p> The representation of a Diameter message as passed to @@ -136,9 +131,8 @@ The representation of a Diameter message as passed to </item> -<marker id="packet"/> - -<tag><c>packet() = &codec_packet;</c></tag> +<tag> +<marker id="packet"/><c>packet() = &codec_packet;</c></tag> <item> <p> A container for incoming and outgoing Diameter messages that's passed @@ -146,25 +140,22 @@ through encode/decode and transport. Fields should not be set in return values except as documented.</p> </item> -<marker id="peer_ref"/> - -<tag><c>peer_ref() = term()</c></tag> +<tag> +<marker id="peer_ref"/><c>peer_ref() = term()</c></tag> <item> <p> A term identifying a transport connection with a Diameter peer.</p> </item> -<marker id="peer"/> - -<tag><c>peer() = {&peer_ref;, &capabilities;}</c></tag> +<tag> +<marker id="peer"/><c>peer() = {&peer_ref;, &capabilities;}</c></tag> <item> <p> A tuple representing a Diameter peer connection.</p> </item> -<marker id="state"/> - -<tag><c>state() = term()</c></tag> +<tag> +<marker id="state"/><c>state() = term()</c></tag> <item> <p> The state maintained by the application callback functions diff --git a/lib/diameter/doc/src/diameter_codec.xml b/lib/diameter/doc/src/diameter_codec.xml index a0313e2877..0117c1c88a 100644 --- a/lib/diameter/doc/src/diameter_codec.xml +++ b/lib/diameter/doc/src/diameter_codec.xml @@ -13,7 +13,8 @@ <erlref> <header> <copyright> -<year>2012</year><year>2016</year> +<year>2012</year> +<year>2017</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -53,17 +54,17 @@ communicated to &man_app; callbacks. Similarly, outgoing Diameter messages are encoded into binary() before being passed to the appropriate &man_transport; module for transmission. -The functions in this module implement this encode/decode.</p> +The functions documented here implement the default encode/decode.</p> -<note> +<warning> <p> -Calls to this module are made by diameter itself as a consequence of -configuration passed to &mod_start_service;. -The encode/decode functions may also be useful for other purposes (eg. -test) but the diameter user does not need to call them explicitly when +The diameter user does not need to call functions here explicitly when sending and receiving messages using &mod_call; and the callback -interface documented in &man_app;.</p> -</note> +interface documented in &man_app;: diameter itself provides encode/decode +as a consequence of configuration passed to &mod_start_service;, and +the results may differ from those returned by the functions documented +here, depending on configuration.</p> +</warning> <p> The &header; and &packet; records below @@ -88,10 +89,9 @@ files resulting from dictionary file compilation.</p> <taglist> -<marker id="integers"/> - -<tag><c>uint8() = 0..255</c></tag> -<tag><c>uint24() = 0..16777215</c></tag> +<tag> +<marker id="integers"/><c>uint8() = 0..255</c></tag><item/> +<tag><c>uint24() = 0..16777215</c></tag><item/> <tag><c>uint32() = 0..4294967295</c></tag> <item> <p> @@ -99,9 +99,8 @@ files resulting from dictionary file compilation.</p> headers.</p> </item> -<marker id="avp"/> - -<tag><c>avp() = #diameter_avp{}</c></tag> +<tag> +<marker id="avp"/><c>avp() = #diameter_avp{}</c></tag> <item> <p> The application-neutral representation of an AVP. @@ -116,9 +115,9 @@ Fields have the following types.</p> <taglist> -<tag><c>code = uint32()</c></tag> -<tag><c>is_mandatory = boolean()</c></tag> -<tag><c>need_encryption = boolean()</c></tag> +<tag><c>code = uint32()</c></tag><item/> +<tag><c>is_mandatory = boolean()</c></tag><item/> +<tag><c>need_encryption = boolean()</c></tag><item/> <tag><c>vendor_id = uint32() | undefined</c></tag> <item> <p> @@ -167,9 +166,8 @@ Possible types are <c>undefined</c> and the Diameter types: </item> -<marker id="dictionary"/> - -<tag><c>dictionary() = module()</c></tag> +<tag> +<marker id="dictionary"/><c>dictionary() = module()</c></tag> <item> <p> @@ -179,9 +177,8 @@ The interface provided by a dictionary module is an implementation detail that may change.</p> </item> -<marker id="header"/> - -<tag><c>header() = #diameter_header{}</c></tag> +<tag> +<marker id="header"/><c>header() = #diameter_header{}</c></tag> <item> <p> The record representation of the Diameter header. @@ -204,11 +201,11 @@ Fields have the following types.</p> <taglist> -<tag><c>version = uint8()</c></tag> -<tag><c>length = uint24()</c></tag> -<tag><c>cmd_code = uint24()</c></tag> -<tag><c>application_id = uint32()</c></tag> -<tag><c>hop_by_hop_id = uint32()</c></tag> +<tag><c>version = uint8()</c></tag><item/> +<tag><c>length = uint24()</c></tag><item/> +<tag><c>cmd_code = uint24()</c></tag><item/> +<tag><c>application_id = uint32()</c></tag><item/> +<tag><c>hop_by_hop_id = uint32()</c></tag><item/> <tag><c>end_to_end_id = uint32()</c></tag> <item> <p> @@ -217,9 +214,9 @@ Hop-by-Hop Identifier and End-to-End Identifier fields of the Diameter header.</p> </item> -<tag><c>is_request = boolean()</c></tag> -<tag><c>is_proxiable = boolean()</c></tag> -<tag><c>is_error = boolean()</c></tag> +<tag><c>is_request = boolean()</c></tag><item/> +<tag><c>is_proxiable = boolean()</c></tag><item/> +<tag><c>is_error = boolean()</c></tag><item/> <tag><c>is_retransmitted = boolean()</c></tag> <item> <p> @@ -232,9 +229,8 @@ header.</p> </item> -<marker id="message"/> - -<tag><c>message() = record() | list()</c></tag> +<tag> +<marker id="message"/><c>message() = record() | list()</c></tag> <item> <p> The representation of a Diameter message as passed to @@ -257,9 +253,8 @@ question: messages are sent exactly as specified.</p> </item> -<marker id="packet"/> - -<tag><c>packet() = #diameter_packet{}</c></tag> +<tag> +<marker id="packet"/><c>packet() = #diameter_packet{}</c></tag> <item> <p> A container for incoming and outgoing Diameter messages. @@ -296,7 +291,7 @@ corresponding values.</p> <warning> <p> -A record-valued <c>msg</c> field does <b>not</b> imply an absence of +A record-valued <c>msg</c> field does <em>not</em> imply an absence of decode errors. The <c>errors</c> field should also be examined.</p> </warning> diff --git a/lib/diameter/doc/src/diameter_dict.xml b/lib/diameter/doc/src/diameter_dict.xml index ae40f99aee..94016d9466 100644 --- a/lib/diameter/doc/src/diameter_dict.xml +++ b/lib/diameter/doc/src/diameter_dict.xml @@ -1,5 +1,5 @@ <?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE erlref SYSTEM "fileref.dtd" [ +<!DOCTYPE fileref SYSTEM "fileref.dtd" [ <!ENTITY format '<seealso marker="#FILE_FORMAT">FILE FORMAT</seealso>'> <!ENTITY records @@ -16,7 +16,8 @@ <header> <copyright> -<year>2011</year><year>2016</year> +<year>2011</year> +<year>2017</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -121,9 +122,8 @@ The order in which sections are specified is unimportant.</p> <taglist> -<marker id="id"/> - -<tag><c>@id Number</c></tag> +<tag> +<marker id="id"/><c>@id Number</c></tag> <item> <p> Defines the integer Number as the Diameter Application Id of the @@ -146,14 +146,13 @@ Example:</p> </item> -<marker id="name"/> - -<tag><c>@name Mod</c></tag> +<tag> +<marker id="name"/><c>@name Mod</c></tag> <item> <p> Defines the name of the generated dictionary module. Can occur at most once and defaults to the name of the dictionary file -minus any extension if unspecified. +minus any extension. The section has empty content.</p> <p> @@ -169,9 +168,8 @@ Example:</p> </item> -<marker id="prefix"/> - -<tag><c>@prefix Name</c></tag> +<tag> +<marker id="prefix"/><c>@prefix Name</c></tag> <item> <p> Defines Name as the prefix to be added to record and constant names @@ -194,9 +192,8 @@ Example:</p> </item> -<marker id="vendor"/> - -<tag><c>@vendor Number Name</c></tag> +<tag> +<marker id="vendor"/><c>@vendor Number Name</c></tag> <item> <p> Defines the integer Number as the the default Vendor-Id of AVPs for @@ -216,9 +213,8 @@ Example:</p> </item> -<marker id="avp_vendor_id"/> - -<tag><c>@avp_vendor_id Number</c></tag> +<tag> +<marker id="avp_vendor_id"/><c>@avp_vendor_id Number</c></tag> <item> <p> Defines the integer Number as the Vendor-Id of the AVPs listed in the @@ -238,9 +234,8 @@ Region-Set </item> -<marker id="inherits"/> - -<tag><c>@inherits Mod</c></tag> +<tag> +<marker id="inherits"/><c>@inherits Mod</c></tag> <item> <p> Defines the name of a dictionary module containing AVP @@ -274,9 +269,8 @@ Example:</p> </pre> </item> -<marker id="avp_types"/> - -<tag><c>@avp_types</c></tag> +<tag> +<marker id="avp_types"/><c>@avp_types</c></tag> <item> <p> Defines the name, code, type and flags of individual AVPs. @@ -308,18 +302,17 @@ The P flag has been deprecated by &the_rfc;.</p> </item> -<marker id="custom_types"/> - -<tag><c>@custom_types Mod</c></tag> +<tag> +<marker id="custom_types"/><c>@custom_types Mod</c></tag> <item> <p> Specifies AVPs for which module Mod provides encode/decode functions. The section contents consists of AVP names. -For each such name, <c>Mod:Name(encode|decode, Type, Data)</c> is +For each such name, <c>Mod:Name(encode|decode, Type, Data, Opts)</c> is expected to provide encode/decode for values of the AVP, where Name is the name of the AVP, Type is it's type as declared in the -<c>@avp_types</c> section of the dictionary and Data is the value to -encode/decode.</p> +<c>@avp_types</c> section of the dictionary, Data is the value to +encode/decode, and Opts is a term that is passed through encode/decode.</p> <p> Example:</p> @@ -331,14 +324,13 @@ Framed-IP-Address </pre> </item> -<marker id="codecs"/> - -<tag><c>@codecs Mod</c></tag> +<tag> +<marker id="codecs"/><c>@codecs Mod</c></tag> <item> <p> Like <c>@custom_types</c> but requires the specified module to export -<c>Mod:Type(encode|decode, Name, Data)</c> rather than -<c>Mod:Name(encode|decode, Type, Data)</c>.</p> +<c>Mod:Type(encode|decode, Name, Data, Opts)</c> rather than +<c>Mod:Name(encode|decode, Type, Data, Opts)</c>.</p> <p> Example:</p> @@ -350,9 +342,8 @@ Framed-IP-Address </pre> </item> -<marker id="messages"/> - -<tag><c>@messages</c></tag> +<tag> +<marker id="messages"/><c>@messages</c></tag> <item> <p> Defines the messages of the application. @@ -397,9 +388,8 @@ RTA ::= < Diameter Header: 287, PXY > </item> -<marker id="grouped"/> - -<tag><c>@grouped</c></tag> +<tag> +<marker id="grouped"/><c>@grouped</c></tag> <item> <p> Defines the contents of the AVPs of the application having type @@ -424,9 +414,8 @@ Specifying a Vendor-Id in the definition of a grouped AVP is equivalent to specifying it with <c>@avp_vendor_id</c>.</p> </item> -<marker id="enum"/> - -<tag><c>@enum Name</c></tag> +<tag> +<marker id="enum"/><c>@enum Name</c></tag> <item> <p> Defines values of AVP Name having type Enumerated. @@ -452,9 +441,8 @@ REMOVE_SIP_SERVER 3 </pre> </item> -<marker id="end"/> - -<tag><c>@end</c></tag> +<tag> +<marker id="end"/><c>@end</c></tag> <item> <p> Causes parsing of the dictionary to terminate: diff --git a/lib/diameter/doc/src/diameter_examples.xml b/lib/diameter/doc/src/diameter_examples.xml index 853ef96bb3..2e1f2b3c03 100644 --- a/lib/diameter/doc/src/diameter_examples.xml +++ b/lib/diameter/doc/src/diameter_examples.xml @@ -42,4 +42,3 @@ Example code can be found in the diameter application's <c>examples</c> subdirectory.</p> </chapter> - diff --git a/lib/diameter/doc/src/diameter_tcp.xml b/lib/diameter/doc/src/diameter_tcp.xml index 00ccc39c15..6ca280c52b 100644 --- a/lib/diameter/doc/src/diameter_tcp.xml +++ b/lib/diameter/doc/src/diameter_tcp.xml @@ -150,7 +150,7 @@ Options <c>binary</c>, <c>packet</c> and <c>active</c> cannot be specified. Also, option <c>port</c> can be specified for a listening transport to specify the local listening port, the default being the standardized -3868 if unspecified. +3868. Note that the option <c>ip</c> specifies the local address.</p> <p> diff --git a/lib/diameter/doc/src/diameter_transport.xml b/lib/diameter/doc/src/diameter_transport.xml index 736d4cbfbd..294e8a8864 100644 --- a/lib/diameter/doc/src/diameter_transport.xml +++ b/lib/diameter/doc/src/diameter_transport.xml @@ -65,9 +65,8 @@ parent).</p> <taglist> -<marker id="message"/> - -<tag><c>message() = binary() | &codec_packet;</c></tag> +<tag> +<marker id="message"/><c>message() = binary() | &codec_packet;</c></tag> <item> <p> A Diameter message as passed over the transport interface.</p> @@ -160,9 +159,9 @@ It should exit if its transport connection with its peer is lost.</p> </funcs> <!-- ===================================================================== --> -<marker id="MESSAGES"/> <section> +<marker id="MESSAGES"/> <title>MESSAGES</title> <p> @@ -234,7 +233,7 @@ established a connection with the peer. Not sent if the transport process has <c>Type=connect</c>.</p> </item> -<tag><c>{diameter, {self(), connected, Remote}}</c></tag> +<tag><c>{diameter, {self(), connected, Remote}}</c></tag><item/> <tag><c>{diameter, {self(), connected, Remote, [LocalAddr]}}</c></tag> <item> <p> diff --git a/lib/diameter/doc/src/diameterc.xml b/lib/diameter/doc/src/diameterc.xml index 5bffe9a771..8f1c660989 100644 --- a/lib/diameter/doc/src/diameterc.xml +++ b/lib/diameter/doc/src/diameterc.xml @@ -11,7 +11,7 @@ <comref> <header> <copyright> -<year>2011</year><year>2013</year> +<year>2011</year><year>2016</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -79,14 +79,14 @@ Write generated source to the specified directory. Defaults to the current working directory.</p> </item> -<tag><![CDATA[-E]]></tag> +<tag><![CDATA[-E]]></tag><item/> <tag><![CDATA[-H]]></tag> <item> <p> Suppress erl and hrl generation, respectively.</p> </item> -<tag><![CDATA[--name <name>]]></tag> +<tag><![CDATA[--name <name>]]></tag><item/> <tag><![CDATA[--prefix <prefix>]]></tag> <item> <p> diff --git a/lib/diameter/doc/src/notes.xml b/lib/diameter/doc/src/notes.xml index b1be7bdcf7..60478606ad 100644 --- a/lib/diameter/doc/src/notes.xml +++ b/lib/diameter/doc/src/notes.xml @@ -11,7 +11,7 @@ <header> <copyright> <year>2011</year> -<year>2016</year> +<year>2017</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -43,6 +43,125 @@ first.</p> <!-- ===================================================================== --> +<section><title>diameter 2.0</title> + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Let candidate peers be passed to diameter:call/4</p> + <p> + With call option peer, to allow a request to be sent to a + peer that hasn't advertised support for the application + in question.</p> + <p> + RFC 6733 2.4 requires a node to send the application + identifiers of all locally supported applications at + capabilities exchange, but not all nodes respect this for + the common application, and diameter itself will send + D[WP][RA] without the common application having been + explicitly advertised. Regarding the common application + as implicit renders Result-Code 5010 + (DIAMETER_NO_COMMON_APPLICATION) meaningless however, so + allow any request to be sent as long as there is a + configured dictionary to support it.</p> + <p> + Own Id: OTP-14338</p> + </item> + <item> + <p> + Improve performance of message encode/decode and related + handling.</p> + <p> + Dictionaries using @custom_types or @codecs will need to + adapt the corresponding functions to accept an additional + argument that is now passed through encode/decode, which + was required to remove various process dictionary-based + workarounds that have been used to solve problems in the + past.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-14343</p> + </item> + <item> + <p> + Add transport options to avoid deadlock and allow for + load regulation.</p> + <p> + Both diameter_tcp and diameter_sctp now accept two new + configuration options: sender and message_cb. The former + causes outgoing sends to take place in a dedicated + process, to avoid the possibility of deadlock when both + the transport process and its peer block in send. The + latter allows a callback to control the reading of + messages on the socket, to allow for backpressure towards + peers when the rate of incoming traffic is greater than + can otherwise be handled.</p> + <p> + Neither of these options are yet documented, but are + unlikely to change unless problems are discovered. The + sender option is not the default since it should probably + always be used in combination with message_cb, to prevent + incoming requests from being read at a higher rate than a + peer allows outgoing answers to be sent.</p> + <p> + Own Id: OTP-14455 Aux Id: ERL-332 </p> + </item> + </list> + </section> + +</section> + +<section><title>diameter 1.12.2</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + An improvement in the handling of peer failover in + diameter 1.12.1 adversely affected performance when + sending requests. Further, the inefficient use of a + public table to route incoming answers has been removed.</p> + <p> + Own Id: OTP-14206</p> + </item> + <item> + <p> + Fixed xml issues in old release notes</p> + <p> + Own Id: OTP-14269</p> + </item> + </list> + </section> + +</section> + +<section><title>diameter 1.12.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Close diameter_tcp/sctp listening sockets at + diameter:stop_service/1.</p> + <p> + Broken by OTP-13611.</p> + <p> + Own Id: OTP-13787 Aux Id: OTP-13611 </p> + </item> + <item> + <p> + Update build scripts to not make assumtions about where + env, cp and perl are located.</p> + <p> + Own Id: OTP-13800</p> + </item> + </list> + </section> + +</section> + <section><title>diameter 1.12</title> <section><title>Fixed Bugs and Malfunctions</title> @@ -230,8 +349,8 @@ first.</p> Fix decode of Grouped AVPs containing errors.</p> <p> RFC 6733 says this of Failed-AVP in 7.5:</p> - <p> - <taglist><item><p><c> In the case where the offending AVP + + <taglist><tag></tag><item><p><c> In the case where the offending AVP is embedded within a Grouped AVP, the Failed-AVP MAY contain the grouped AVP, which in turn contains the single offending AVP. The same method MAY be employed if @@ -240,11 +359,11 @@ first.</p> the grouped AVP hierarchy up to the single offending AVP. This enables the recipient to detect the location of the offending AVP when embedded in a - group.</c></p></item></taglist></p> + group.</c></p></item></taglist> <p> It says this of DIAMETER_INVALID_AVP_LENGTH in 7.1.5:</p> - <p> - <taglist><item><p><c> The request contained an AVP with + + <taglist><tag></tag><item><p><c> The request contained an AVP with an invalid length. A Diameter message indicating this error MUST include the offending AVPs within a Failed-AVP AVP. In cases where the erroneous AVP length value @@ -259,7 +378,8 @@ first.</p> the minimum AVP header length, it is sufficient to include an offending AVP header that is formulated by padding the incomplete AVP header with zero up to the - minimum AVP header length.</c></p></item></taglist></p> + minimum AVP header length.</c></p></item></taglist> + <p> The AVPs placed in the errors field of a diameter_packet record are intended to be appropriate for inclusion in a @@ -924,8 +1044,8 @@ first.</p> Be lenient with the M-bit in Grouped AVPs.</p> <p> RFC 6733 says this, in 4.4:</p> - <p> - <taglist><item><p><c>Receivers of a Grouped AVP that does + + <taglist><tag></tag><item><p><c>Receivers of a Grouped AVP that does not have the 'M' (mandatory) bit set and one or more of the encapsulated AVPs within the group has the 'M' (mandatory) bit set MAY simply be ignored if the Grouped @@ -933,14 +1053,14 @@ first.</p> encapsulated AVP with its 'M' (mandatory) bit set is further encapsulated within other sub-groups, i.e., other Grouped AVPs embedded within the Grouped - AVP.</c></p></item></taglist></p> + AVP.</c></p></item></taglist> <p> The first sentence is mangled but take it to mean this:</p> - <p> - <taglist><item><p><c>An unrecognized AVP of type Grouped + + <taglist><tag></tag><item><p><c>An unrecognized AVP of type Grouped that does not set the 'M' bit MAY be ignored even if one of its encapsulated AVPs sets the 'M' - bit.</c></p></item></taglist></p> + bit.</c></p></item></taglist> <p> This is a bit of a non-statement since if the AVP is unrecognized then its type is unknown. We therefore don't diff --git a/lib/diameter/examples/code/relay.erl b/lib/diameter/examples/code/relay.erl index 3846b1d161..806f79915b 100644 --- a/lib/diameter/examples/code/relay.erl +++ b/lib/diameter/examples/code/relay.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2016. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -53,7 +53,7 @@ {'Auth-Application-Id', [16#FFFFFFFF]}, {string_decode, false}, {application, [{alias, relay}, - {dictionary, diameter_relay}, + {dictionary, diameter_gen_relay}, {module, relay_cb}]}]). %% start/1 diff --git a/lib/diameter/include/diameter_gen.hrl b/lib/diameter/include/diameter_gen.hrl index 611ad796a9..fb6370fe54 100644 --- a/lib/diameter/include/diameter_gen.hrl +++ b/lib/diameter/include/diameter_gen.hrl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -20,716 +20,36 @@ %% %% This file contains code that's included by encode/decode modules -%% generated by diameter_codegen.erl. This code does most of the work, the -%% generated code being kept simple. +%% generated by diameter_codegen.erl. This code used to do most of the +%% work, but now passes it off to module diameter_gen. %% --define(THROW(T), throw({?MODULE, T})). +%% encode_avps/3 -%% Tag common to generated dictionaries. --define(TAG, diameter_gen). +encode_avps(Name, Vals, Opts) -> + diameter_gen:encode_avps(Name, Vals, Opts#{module => ?MODULE}). -%% Key to a value in the process dictionary that determines whether or -%% not an unrecognized AVP setting the M-bit should be regarded as an -%% error or not. See is_strict/0. This is only used to relax M-bit -%% interpretation inside Grouped AVPs not setting the M-bit. The -%% service_opt() strict_mbit can be used to disable the check -%% globally. --define(STRICT_KEY, strict). +%% decode_avps/2 -%% Key that says whether or not we should do a best-effort decode -%% within Failed-AVP. --define(FAILED_KEY, failed). +decode_avps(Name, Recs, Opts) -> + diameter_gen:decode_avps(Name, Recs, Opts#{module => ?MODULE}). --type parent_name() :: atom(). %% parent = Message or AVP --type parent_record() :: tuple(). %% --type avp_name() :: atom(). --type avp_record() :: tuple(). --type avp_values() :: [{avp_name(), term()}]. +%% avp/5 --type non_grouped_avp() :: #diameter_avp{}. --type grouped_avp() :: nonempty_improper_list(#diameter_avp{}, [avp()]). --type avp() :: non_grouped_avp() | grouped_avp(). +avp(T, Data, Name, Opts, Mod) -> + Mod:avp(T, Data, Name, Opts#{module := Mod}). -%% Use a (hopefully) unique key when manipulating the process -%% dictionary. +%% grouped_avp/4 -putr(K,V) -> - put({?TAG, K}, V). +grouped_avp(T, Name, Data, Opts) -> + diameter_gen:grouped_avp(T, Name, Data, Opts). -getr(K) -> - case get({?TAG, K}) of - undefined -> - V = erase({?MODULE, K}), %% written in old code - V == undefined orelse putr(K,V), - V; - V -> - V - end. +%% empty_group/2 -eraser(K) -> - erase({?TAG, K}). +empty_group(Name, Opts) -> + diameter_gen:empty_group(Name, Opts). -%% --------------------------------------------------------------------------- -%% # encode_avps/2 -%% --------------------------------------------------------------------------- +%% empty/2 --spec encode_avps(parent_name(), parent_record() | avp_values()) - -> binary() - | no_return(). - -encode_avps(Name, Vals) - when is_list(Vals) -> - encode_avps(Name, '#set-'(Vals, newrec(Name))); - -encode_avps(Name, Rec) -> - try - list_to_binary(encode(Name, Rec)) - catch - throw: {?MODULE, Reason} -> - diameter_lib:log({encode, error}, - ?MODULE, - ?LINE, - {Reason, Name, Rec}), - erlang:error(list_to_tuple(Reason ++ [Name])); - error: Reason -> - Stack = erlang:get_stacktrace(), - diameter_lib:log({encode, failure}, - ?MODULE, - ?LINE, - {Reason, Name, Rec, Stack}), - erlang:error({encode_failure, Reason, Name, Stack}) - end. - -%% encode/2 - -encode(Name, Rec) -> - lists:flatmap(fun(A) -> encode(Name, A, '#get-'(A, Rec)) end, - '#info-'(element(1, Rec), fields)). - -%% encode/3 - -encode(Name, AvpName, Values) -> - e(Name, AvpName, avp_arity(Name, AvpName), Values). - -%% e/4 - -e(_, AvpName, 1, undefined) -> - ?THROW([mandatory_avp_missing, AvpName]); - -e(Name, AvpName, 1, Value) -> - e(Name, AvpName, [Value]); - -e(_, _, {0,_}, []) -> - []; - -e(_, AvpName, _, T) - when not is_list(T) -> - ?THROW([repeated_avp_as_non_list, AvpName, T]); - -e(_, AvpName, {Min, _}, L) - when length(L) < Min -> - ?THROW([repeated_avp_insufficient_arity, AvpName, Min, L]); - -e(_, AvpName, {_, Max}, L) - when Max < length(L) -> - ?THROW([repeated_avp_excessive_arity, AvpName, Max, L]); - -e(Name, AvpName, _, Values) -> - e(Name, AvpName, Values). - -%% e/3 - -e(Name, 'AVP', Values) -> - [pack_AVP(Name, A) || A <- Values]; - -e(_, AvpName, Values) -> - e(AvpName, Values). - -%% e/2 - -e(AvpName, Values) -> - H = avp_header(AvpName), - [diameter_codec:pack_avp(H, avp(encode, V, AvpName)) || V <- Values]. - -%% pack_AVP/2 - -%% No value: assume AVP data is already encoded. The normal case will -%% be when this is passed back from #diameter_packet.errors as a -%% consequence of a failed decode. Any AVP can be encoded this way -%% however, which side-steps any arity checks for known AVP's and -%% could potentially encode something unfortunate. -pack_AVP(_, #diameter_avp{value = undefined} = A) -> - diameter_codec:pack_avp(A); - -%% Missing name for value encode. -pack_AVP(_, #diameter_avp{name = N, value = V}) - when N == undefined; - N == 'AVP' -> - ?THROW([value_with_nameless_avp, N, V]); - -%% Or not. Ensure that 'AVP' is the appropriate field. Note that if we -%% don't know this AVP at all then the encode will fail. -pack_AVP(Name, #diameter_avp{name = AvpName, - value = Data}) -> - 0 == avp_arity(Name, AvpName) - orelse ?THROW([known_avp_as_AVP, Name, AvpName, Data]), - e(AvpName, [Data]). - -%% --------------------------------------------------------------------------- -%% # decode_avps/2 -%% --------------------------------------------------------------------------- - --spec decode_avps(parent_name(), [#diameter_avp{}]) - -> {parent_record(), [avp()], Failed} - when Failed :: [{5000..5999, #diameter_avp{}}]. - -decode_avps(Name, Recs) -> - {Avps, {Rec, Failed}} - = lists:foldl(fun(T,A) -> decode(Name, T, A) end, - {[], {newrec(Name), []}}, - Recs), - {Rec, Avps, Failed ++ missing(Rec, Name, Failed)}. -%% Append 5005 errors so that errors are reported in the order -%% encountered. Failed-AVP should typically contain the first -%% encountered error accordg to the RFC. - -newrec(Name) -> - '#new-'(name2rec(Name)). - -%% 3588: -%% -%% DIAMETER_MISSING_AVP 5005 -%% The request did not contain an AVP that is required by the Command -%% Code definition. If this value is sent in the Result-Code AVP, a -%% Failed-AVP AVP SHOULD be included in the message. The Failed-AVP -%% AVP MUST contain an example of the missing AVP complete with the -%% Vendor-Id if applicable. The value field of the missing AVP -%% should be of correct minimum length and contain zeros. - -missing(Rec, Name, Failed) -> - Avps = lists:foldl(fun({_, #diameter_avp{code = C, vendor_id = V}}, A) -> - sets:add_element({C,V}, A) - end, - sets:new(), - Failed), - [{5005, A} || F <- '#info-'(element(1, Rec), fields), - not has_arity(avp_arity(Name, F), '#get-'(F, Rec)), - #diameter_avp{code = C, vendor_id = V} - = A <- [empty_avp(F)], - not sets:is_element({C,V}, Avps)]. - -%% Maximum arities have already been checked in building the record. - -has_arity({Min, _}, L) -> - has_prefix(Min, L); -has_arity(N, V) -> - N /= 1 orelse V /= undefined. - -%% Compare a non-negative integer and the length of a list without -%% computing the length. -has_prefix(0, _) -> - true; -has_prefix(_, []) -> - false; -has_prefix(N, L) -> - has_prefix(N-1, tl(L)). - -%% empty_avp/1 - -empty_avp(Name) -> - {Code, Flags, VId} = avp_header(Name), - {Name, Type} = avp_name(Code, VId), - #diameter_avp{name = Name, - code = Code, - vendor_id = VId, - is_mandatory = 0 /= (Flags band 2#01000000), - need_encryption = 0 /= (Flags band 2#00100000), - data = empty_value(Name), - type = Type}. - -%% 3588, ch 7: -%% -%% The Result-Code AVP describes the error that the Diameter node -%% encountered in its processing. In case there are multiple errors, -%% the Diameter node MUST report only the first error it encountered -%% (detected possibly in some implementation dependent order). The -%% specific errors that can be described by this AVP are described in -%% the following section. - -%% decode/3 - -decode(Name, #diameter_avp{code = Code, vendor_id = Vid} = Avp, Acc) -> - decode(Name, avp_name(Code, Vid), Avp, Acc). - -%% decode/4 - -%% AVP is defined in the dictionary ... -decode(Name, {AvpName, Type}, Avp, Acc) -> - d(Name, Avp#diameter_avp{name = AvpName, type = Type}, Acc); - -%% ... or not. -decode(Name, 'AVP', Avp, Acc) -> - decode_AVP(Name, Avp, Acc). - -%% 6733, 4.4: -%% -%% Receivers of a Grouped AVP that does not have the 'M' (mandatory) -%% bit set and one or more of the encapsulated AVPs within the group -%% has the 'M' (mandatory) bit set MAY simply be ignored if the -%% Grouped AVP itself is unrecognized. The rule applies even if the -%% encapsulated AVP with its 'M' (mandatory) bit set is further -%% encapsulated within other sub-groups, i.e., other Grouped AVPs -%% embedded within the Grouped AVP. -%% -%% The first sentence is slightly mangled, but take it to mean this: -%% -%% An unrecognized AVP of type Grouped that does not set the 'M' bit -%% MAY be ignored even if one of its encapsulated AVPs sets the 'M' -%% bit. -%% -%% The text above is a change from RFC 3588, which instead says this: -%% -%% Further, if any of the AVPs encapsulated within a Grouped AVP has -%% the 'M' (mandatory) bit set, the Grouped AVP itself MUST also -%% include the 'M' bit set. -%% -%% Both of these texts have problems. If the AVP is unknown then its -%% type is unknown since the type isn't sent over the wire, so the -%% 6733 text becomes a non-statement: don't know that the AVP not -%% setting the M-bit is of type Grouped, therefore can't know that its -%% data consists of encapsulated AVPs, therefore can't but ignore that -%% one of these might set the M-bit. It should be no worse if we know -%% the AVP to have type Grouped. -%% -%% Similarly, for the 3588 text: if we receive an AVP that doesn't set -%% the M-bit and don't know that the AVP has type Grouped then we -%% can't realize that its data contains an AVP that sets the M-bit, so -%% can't regard the AVP as erroneous on this account. Again, it should -%% be no worse if the type is known to be Grouped, but in this case -%% the RFC forces us to regard the AVP as erroneous. This is -%% inconsistent, and the 3588 text has never been enforced. -%% -%% So, if an AVP doesn't set the M-bit then we're free to ignore it, -%% regardless of the AVP's type. If we know the type to be Grouped -%% then we must ignore the M-bit on an encapsulated AVP. That means -%% packing such an encapsulated AVP into an 'AVP' field if need be, -%% not regarding the lack of a specific field as an error as is -%% otherwise the case. (The lack of an AVP-specific field being how we -%% defined the RFC's "unrecognized", which is slightly stronger than -%% "not defined".) - -%% d/3 - -d(Name, Avp, Acc) -> - #diameter_avp{name = AvpName, - data = Data, - type = Type, - is_mandatory = M} - = Avp, - - %% Use the process dictionary is to keep track of whether or not - %% to ignore an M-bit on an encapsulated AVP. Not ideal, but the - %% alternative requires widespread changes to be able to pass the - %% value around through the entire decode. The solution here is - %% simple in comparison, both to implement and to understand. - - Strict = relax(Type, M), - - %% Use the process dictionary again to keep track of whether we're - %% decoding within Failed-AVP and should ignore decode errors - %% altogether. - - Failed = relax(Name), %% Not AvpName or else a failed Failed-AVP - %% decode is packed into 'AVP'. - Mod = dict(Failed), %% Dictionary to decode in. - - %% On decode, a Grouped AVP is represented as a #diameter_avp{} - %% list with AVP as head and component AVPs as tail. On encode, - %% data can be a list of component AVPs. - - try Mod:avp(decode, Data, AvpName) of - V -> - {Avps, T} = Acc, - {H, A} = ungroup(V, Avp), - {[H | Avps], pack_avp(Name, A, T)} - catch - throw: {?TAG, {grouped, Error, ComponentAvps}} -> - g(is_failed(), Error, Name, trim(Avp), Acc, ComponentAvps); - error: Reason -> - d(is_failed(), Reason, Name, trim(Avp), Acc) - after - reset(?STRICT_KEY, Strict), - reset(?FAILED_KEY, Failed) - end. - -%% trim/1 -%% -%% Remove any extra bit that was added in diameter_codec to induce a -%% 5014 error. - -trim(#diameter_avp{data = <<0:1, Bin/binary>>} = Avp) -> - Avp#diameter_avp{data = Bin}; - -trim(Avps) - when is_list(Avps) -> - lists:map(fun trim/1, Avps); - -trim(Avp) -> - Avp. - -%% dict/1 -%% -%% Retrieve the dictionary for the best-effort decode of Failed-AVP, -%% as put by diameter_codec:decode/2. See that function for the -%% explanation. - -dict(true) -> - case get({diameter_codec, dictionary}) of - undefined -> - ?MODULE; - Mod -> - Mod - end; - -dict(_) -> - ?MODULE. - -%% g/5 - -%% Ignore decode errors within Failed-AVP (best-effort) ... -g(true, [_Error | Rec], Name, Avp, Acc, _ComponentAvps) -> - decode_AVP(Name, Avp#diameter_avp{value = Rec}, Acc); -g(true, _Error, Name, Avp, Acc, _ComponentAvps) -> - decode_AVP(Name, Avp, Acc); - -%% ... or not. -g(false, [Error | _Rec], _Name, Avp, Acc, ComponentAvps) -> - g(Error, Avp, Acc, ComponentAvps); -g(false, Error, _Name, Avp, Acc, ComponentAvps) -> - g(Error, Avp, Acc, ComponentAvps). - -%% g/4 - -g({RC, ErrorData}, Avp, Acc, ComponentAvps) -> - {Avps, {Rec, Errors}} = Acc, - E = Avp#diameter_avp{data = [ErrorData]}, - {[[Avp | trim(ComponentAvps)] | Avps], {Rec, [{RC, E} | Errors]}}. - -%% d/5 - -%% Ignore a decode error within Failed-AVP ... -d(true, _, Name, Avp, Acc) -> - decode_AVP(Name, Avp, Acc); - -%% ... or not. Failures here won't be visible since they're a "normal" -%% occurrence if the peer sends a faulty AVP that we need to respond -%% sensibly to. Log the occurence for traceability, but the peer will -%% also receive info in the resulting answer message. -d(false, Reason, Name, Avp, {Avps, Acc}) -> - Stack = diameter_lib:get_stacktrace(), - diameter_lib:log(decode_error, - ?MODULE, - ?LINE, - {Name, Avp#diameter_avp.name, Stack}), - {Rec, Failed} = Acc, - {[Avp|Avps], {Rec, [rc(Reason, Avp) | Failed]}}. - -%% relax/2 - -%% Set false in the process dictionary as soon as we see a Grouped AVP -%% that doesn't set the M-bit, so that is_strict() can say whether or -%% not to ignore the M-bit on an encapsulated AVP. -relax('Grouped', M) -> - case getr(?STRICT_KEY) of - undefined when not M -> - putr(?STRICT_KEY, M); - _ -> - false - end; -relax(_, _) -> - false. - -is_strict() -> - diameter_codec:getopt(strict_mbit) - andalso false /= getr(?STRICT_KEY). - -%% relax/1 -%% -%% Set true in the process dictionary as soon as we see Failed-AVP. -%% Matching on 'Failed-AVP' assumes that this is the RFC AVP. -%% Strictly, this doesn't need to be the case. - -relax('Failed-AVP') -> - putr(?FAILED_KEY, true); - -relax(_) -> - is_failed(). - -%% is_failed/0 -%% -%% Is the AVP currently being decoded nested within Failed-AVP? Note -%% that this is only true when Failed-AVP is the parent. In -%% particular, it's not true when Failed-AVP itself is being decoded -%% (unless nested). - -is_failed() -> - true == getr(?FAILED_KEY). - -%% is_failed/1 - -is_failed(Name) -> - 'Failed-AVP' == Name orelse is_failed(). - -%% reset/2 - -reset(Key, undefined) -> - eraser(Key); -reset(_, _) -> - ok. - -%% decode_AVP/3 -%% -%% Don't know this AVP: see if it can be packed in an 'AVP' field -%% undecoded. Note that the type field is 'undefined' in this case. - -decode_AVP(Name, Avp, {Avps, Acc}) -> - {[trim(Avp) | Avps], pack_AVP(Name, Avp, Acc)}. - -%% rc/1 - -%% diameter_types will raise an error of this form to communicate -%% DIAMETER_INVALID_AVP_LENGTH (5014). A module specified to a -%% @custom_types tag in a dictionary file can also raise an error of -%% this form. -rc({'DIAMETER', 5014 = RC, _}, #diameter_avp{name = AvpName} = Avp) -> - {RC, Avp#diameter_avp{data = empty_value(AvpName)}}; - -%% 3588: -%% -%% DIAMETER_INVALID_AVP_VALUE 5004 -%% The request contained an AVP with an invalid value in its data -%% portion. A Diameter message indicating this error MUST include -%% the offending AVPs within a Failed-AVP AVP. -rc(_, Avp) -> - {5004, Avp}. - -%% ungroup/2 - --spec ungroup(term(), #diameter_avp{}) - -> {avp(), #diameter_avp{}}. - -%% The decoded value in the Grouped case is as returned by grouped_avp/3: -%% a record and a list of component AVP's. -ungroup(V, #diameter_avp{type = 'Grouped'} = Avp) -> - {Rec, As} = V, - A = Avp#diameter_avp{value = Rec}, - {[A|As], A}; - -%% Otherwise it's just a plain value. -ungroup(V, #diameter_avp{} = Avp) -> - A = Avp#diameter_avp{value = V}, - {A, A}. - -%% pack_avp/3 - -pack_avp(Name, #diameter_avp{name = AvpName} = Avp, Acc) -> - pack_avp(Name, avp_arity(Name, AvpName), Avp, Acc). - -%% pack_avp/4 - -pack_avp(Name, 0, Avp, Acc) -> - pack_AVP(Name, Avp, Acc); - -pack_avp(_, Arity, Avp, Acc) -> - pack(Arity, Avp#diameter_avp.name, Avp, Acc). - -%% pack_AVP/3 - -%% Length failure was induced because of a header/payload length -%% mismatch. The AVP Length is reset to match the received data if -%% this AVP is encoded in an answer message, since the length is -%% computed. -%% -%% Data is a truncated header if command_code = undefined, otherwise -%% payload bytes. The former is padded to the length of a header if -%% the AVP reaches an outgoing encode in diameter_codec. -%% -%% RFC 6733 says that an AVP returned with 5014 can contain a minimal -%% payload for the AVP's type, but in this case we don't know the -%% type. - -pack_AVP(_, #diameter_avp{data = <<0:1, Data/binary>>} = Avp, Acc) -> - {Rec, Failed} = Acc, - {Rec, [{5014, Avp#diameter_avp{data = Data}} | Failed]}; - -pack_AVP(Name, #diameter_avp{is_mandatory = M, name = AvpName} = Avp, Acc) -> - case pack_arity(Name, AvpName, M) of - 0 -> - {Rec, Failed} = Acc, - {Rec, [{if M -> 5001; true -> 5008 end, Avp} | Failed]}; - Arity -> - pack(Arity, 'AVP', Avp, Acc) - end. - -%% Give Failed-AVP special treatment since (1) it'll contain any -%% unrecognized mandatory AVP's and (2) the RFC 3588 grammar failed to -%% allow for Failed-AVP in an answer-message. - -pack_arity(Name, AvpName, M) -> - - %% Not testing just Name /= 'Failed-AVP' means we're changing the - %% packing of AVPs nested within Failed-AVP, but the point of - %% ignoring errors within Failed-AVP is to decode as much as - %% possible, and failing because a mandatory AVP couldn't be - %% packed into a dedicated field defeats that point. Note - %% is_failed/1 since is_failed/0 will return false when packing - %% 'AVP' within Failed-AVP. - - pack_arity(is_failed(Name) - orelse {Name, AvpName} == {'answer-message', 'Failed-AVP'} - orelse not M - orelse not is_strict(), - Name). - -pack_arity(true, Name) -> - avp_arity(Name, 'AVP'); - -pack_arity(false, _) -> - 0. - -%% 3588: -%% -%% DIAMETER_AVP_UNSUPPORTED 5001 -%% The peer received a message that contained an AVP that is not -%% recognized or supported and was marked with the Mandatory bit. A -%% Diameter message with this error MUST contain one or more Failed- -%% AVP AVP containing the AVPs that caused the failure. -%% -%% DIAMETER_AVP_NOT_ALLOWED 5008 -%% A message was received with an AVP that MUST NOT be present. The -%% Failed-AVP AVP MUST be included and contain a copy of the -%% offending AVP. - -%% pack/4 - -pack(Arity, FieldName, Avp, {Rec, _} = Acc) -> - pack('#get-'(FieldName, Rec), Arity, FieldName, Avp, Acc). - -%% pack/5 - -pack(undefined, 1, FieldName, Avp, Acc) -> - p(FieldName, fun(V) -> V end, Avp, Acc); - -%% 3588: -%% -%% DIAMETER_AVP_OCCURS_TOO_MANY_TIMES 5009 -%% A message was received that included an AVP that appeared more -%% often than permitted in the message definition. The Failed-AVP -%% AVP MUST be included and contain a copy of the first instance of -%% the offending AVP that exceeded the maximum number of occurrences -%% - -pack(_, 1, _, Avp, {Rec, Failed}) -> - {Rec, [{5009, Avp} | Failed]}; -pack(L, {_, Max}, FieldName, Avp, Acc) -> - case '*' /= Max andalso has_prefix(Max, L) of - true -> - {Rec, Failed} = Acc, - {Rec, [{5009, Avp} | Failed]}; - false -> - p(FieldName, fun(V) -> [V|L] end, Avp, Acc) - end. - -%% p/4 - -p(F, Fun, Avp, {Rec, Failed}) -> - {'#set-'({F, Fun(value(F, Avp))}, Rec), Failed}. - -value('AVP', Avp) -> - Avp; -value(_, Avp) -> - Avp#diameter_avp.value. - -%% --------------------------------------------------------------------------- -%% # grouped_avp/3 -%% --------------------------------------------------------------------------- - --spec grouped_avp(decode, avp_name(), bitstring()) - -> {avp_record(), [avp()]}; - (encode, avp_name(), avp_record() | avp_values()) - -> binary() - | no_return(). - -%% Length error induced by diameter_codec:collect_avps/1: the AVP -%% length in the header was too short (insufficient for the extracted -%% header) or too long (past the end of the message). An empty payload -%% is sufficient according to the RFC text for 5014. -grouped_avp(decode, _Name, <<0:1, _/binary>>) -> - throw({?TAG, {grouped, {5014, []}, []}}); - -grouped_avp(decode, Name, Data) -> - grouped_decode(Name, diameter_codec:collect_avps(Data)); - -grouped_avp(encode, Name, Data) -> - encode_avps(Name, Data). - -%% grouped_decode/2 -%% -%% Note that Grouped is the only AVP type that doesn't just return a -%% decoded value, also returning the list of component diameter_avp -%% records. - -%% Length error in trailing component AVP. -grouped_decode(_Name, {Error, Acc}) -> - {5014, Avp} = Error, - throw({?TAG, {grouped, Error, [Avp | Acc]}}); - -%% 7.5. Failed-AVP AVP - -%% In the case where the offending AVP is embedded within a Grouped AVP, -%% the Failed-AVP MAY contain the grouped AVP, which in turn contains -%% the single offending AVP. The same method MAY be employed if the -%% grouped AVP itself is embedded in yet another grouped AVP and so on. -%% In this case, the Failed-AVP MAY contain the grouped AVP hierarchy up -%% to the single offending AVP. This enables the recipient to detect -%% the location of the offending AVP when embedded in a group. - -%% An error in decoding a component AVP throws the first fauly -%% component, which the catch in d/3 wraps in the Grouped AVP in -%% question. A partially decoded record is only used when ignoring -%% errors in Failed-AVP. -grouped_decode(Name, ComponentAvps) -> - {Rec, Avps, Es} = decode_avps(Name, ComponentAvps), - [] == Es orelse throw({?TAG, {grouped, [{_,_} = hd(Es) | Rec], Avps}}), - {Rec, Avps}. - -%% --------------------------------------------------------------------------- -%% # empty_group/1 -%% --------------------------------------------------------------------------- - -empty_group(Name) -> - list_to_binary(empty_body(Name)). - -empty_body(Name) -> - [z(F, avp_arity(Name, F)) || F <- '#info-'(name2rec(Name), fields)]. - -z(Name, 1) -> - z(Name); -z(_, {0,_}) -> - []; -z(Name, {Min, _}) -> - lists:duplicate(Min, z(Name)). - -z('AVP') -> - <<0:64/integer>>; %% minimal header -z(Name) -> - Bin = diameter_codec:pack_avp(avp_header(Name), empty_value(Name)), - << <<0>> || <<_>> <= Bin >>. - -%% --------------------------------------------------------------------------- -%% # empty/1 -%% --------------------------------------------------------------------------- - -empty(AvpName) -> - avp(encode, zero, AvpName). +empty(Name, Opts) -> + diameter_gen:empty(Name, Opts). diff --git a/lib/diameter/src/Makefile b/lib/diameter/src/Makefile index 7f61620fc1..6bf748a727 100644 --- a/lib/diameter/src/Makefile +++ b/lib/diameter/src/Makefile @@ -123,7 +123,7 @@ ERL_COMPILE_FLAGS += \ # erl/hrl from dictionary file. gen/diameter_gen_%.erl gen/diameter_gen_%.hrl: dict/%.dia $(dia_verbose) \ - ../bin/diameterc -o gen -i $(EBIN) $< + escript ../bin/diameterc -o gen -i $(EBIN) $< opt: $(TARGET_FILES) diff --git a/lib/diameter/src/base/diameter.erl b/lib/diameter/src/base/diameter.erl index e8f2f63f86..bd92e16fba 100644 --- a/lib/diameter/src/base/diameter.erl +++ b/lib/diameter/src/base/diameter.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -377,6 +377,7 @@ call(SvcName, App, Message) -> | {capabilities, [capability()]} | {capabilities_cb, evaluable()} | {capx_timeout, 'Unsigned32'()} + | {capx_strictness, boolean()} | {disconnect_cb, evaluable()} | {dpr_timeout, 'Unsigned32'()} | {dpa_timeout, 'Unsigned32'()} @@ -405,4 +406,5 @@ call(SvcName, App, Message) -> :: {extra, list()} | {filter, peer_filter()} | {timeout, 'Unsigned32'()} + | {peer, peer_ref()} | detach. diff --git a/lib/diameter/src/base/diameter_callback.erl b/lib/diameter/src/base/diameter_callback.erl index f479cb6612..f9cdc66c70 100644 --- a/lib/diameter/src/base/diameter_callback.erl +++ b/lib/diameter/src/base/diameter_callback.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -35,7 +35,7 @@ %% in a callback applied to the atom-valued callback name and argument %% list. For all callbacks not to this module, the 'extra' field is a %% list of additional arguments, following arguments supplied by -%% diameter but preceeding those of the diameter:evaluable() being +%% diameter but preceding those of the diameter:evaluable() being %% applied. %% %% For example, the following config to diameter:start_service/2, in diff --git a/lib/diameter/src/base/diameter_capx.erl b/lib/diameter/src/base/diameter_capx.erl index 07a678c617..62b05644b2 100644 --- a/lib/diameter/src/base/diameter_capx.erl +++ b/lib/diameter/src/base/diameter_capx.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -94,6 +94,9 @@ recv_CER(CER, Svc, Dict) -> recv_CEA(CEA, Svc, Dict) -> try_it([fun rCEA/3, CEA, Svc, Dict]). +-spec make_caps(#diameter_caps{}, [{atom(), term()}]) + -> tried(#diameter_caps{}). + make_caps(Caps, Opts) -> try_it([fun mk_caps/2, Caps, Opts]). @@ -110,31 +113,20 @@ try_it([Fun | Args]) -> %% mk_caps/2 mk_caps(Caps0, Opts) -> - {Caps, _} = lists:foldl(fun set_cap/2, - {Caps0, #diameter_caps{_ = false}}, - Opts), - Caps. - --define(SC(K,F), - set_cap({K, Val}, {Caps, #diameter_caps{F = false} = C}) -> - {Caps#diameter_caps{F = cap(K, copy(Val))}, - C#diameter_caps{F = true}}). - -?SC('Origin-Host', origin_host); -?SC('Origin-Realm', origin_realm); -?SC('Host-IP-Address', host_ip_address); -?SC('Vendor-Id', vendor_id); -?SC('Product-Name', product_name); -?SC('Origin-State-Id', origin_state_id); -?SC('Supported-Vendor-Id', supported_vendor_id); -?SC('Auth-Application-Id', auth_application_id); -?SC('Inband-Security-Id', inband_security_id); -?SC('Acct-Application-Id', acct_application_id); -?SC('Vendor-Specific-Application-Id', vendor_specific_application_id); -?SC('Firmware-Revision', firmware_revision); - -set_cap({Key, _}, _) -> - ?THROW({duplicate, Key}). + Fields = diameter_gen_base_rfc3588:'#info-'(diameter_base_CER, fields), + Defs = lists:zip(Fields, tl(tuple_to_list(Caps0))), + Unset = maps:from_list([{F, true} || F <- lists:droplast(Fields)]), %% no 'AVP' + {Caps, _} = lists:foldl(fun set_cap/2, {Defs, Unset}, Opts), + #diameter_caps{} = list_to_tuple([diameter_caps | [V || {_,V} <- Caps]]). + +set_cap({F,V}, {Caps, Unset}) -> + case Unset of + #{F := true} -> + {lists:keyreplace(F, 1, Caps, {F, cap(F, copy(V))}), + maps:remove(F, Unset)}; + _ -> + ?THROW({duplicate, F}) + end. cap(K, V) when K == 'Origin-Host'; @@ -349,7 +341,7 @@ cs(LS, RS) -> cea_from_cer(CER, Dict) -> RecName = Dict:msg2rec('CEA'), [_ | Values] = Dict:'#get-'(CER), - Dict:'#set-'(Values, Dict:'#new-'(RecName)). + Dict:'#new-'([RecName | Values]). %% rCEA/3 @@ -424,7 +416,48 @@ bcaps(N, Caps) -> %% common_applications/3 %% %% Identify the (local) applications to be supported on the connection -%% in question. +%% in question. The RFC says this: +%% +%% 2.4 Application Identifiers +%% +%% Relay and redirect agents MUST advertise the Relay Application ID, +%% while all other Diameter nodes MUST advertise locally supported +%% applications. +%% +%% Taken literally, every Diameter node should then advertise support +%% for the Diameter common messages application, with id 0, since no +%% node can perform capabilities exchange without it. Expecting this, +%% or regarding the support as implicit, renders the Result-Code 5010 +%% (DIAMETER_NO_COMMON_APPLICATION) meaningless however, since every +%% node would regard the common application as being in common with +%% the peer. In practice, nodes may or may not advertise support for +%% Diameter common messages. +%% +%% That only explicitly advertised applications should be considered +%% when computing the intersection with the peer is supported here: +%% +%% 5.3. Capabilities Exchange +%% +%% The receiver of the Capabilities-Exchange-Request (CER) MUST +%% determine common applications by computing the intersection of its +%% own set of supported Application Ids against all of the +%% Application-Id AVPs (Auth-Application-Id, Acct-Application-Id, and +%% Vendor-Specific-Application-Id) present in the CER. +%% +%% The same section also has the following about capabilities exchange +%% messages. +%% +%% The receiver only issues commands to its peers that have advertised +%% support for the Diameter application that defines the command. +%% +%% This statement is also difficult to interpret literally since it +%% would disallow D[WP]R and more when Diameter common messages isn't +%% advertised. In practice, diameter lets requests be sent as long as +%% there's a dictionary configured to support it, peer selection by +%% advertised application being possible to preempt by passing +%% candidate peers directly to diameter:call/4. The peer can always +%% answer 3001 (DIAMETER_COMMAND_UNSUPPORTED) or 3007 +%% (DIAMETER_APPLICATION_UNSUPPORTED) if this is objectionable. common_applications(LCaps, RCaps, #diameter_service{applications = Apps}) -> LA = app_union(LCaps), diff --git a/lib/diameter/src/base/diameter_codec.erl b/lib/diameter/src/base/diameter_codec.erl index 1ea5357924..82fa796e69 100644 --- a/lib/diameter/src/base/diameter_codec.erl +++ b/lib/diameter/src/base/diameter_codec.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -20,11 +20,8 @@ -module(diameter_codec). --export([encode/2, - decode/2, - decode/3, - setopts/1, - getopt/1, +-export([encode/2, encode/3, + decode/2, decode/3, decode/4, collect_avps/1, decode_header/1, sequence_numbers/1, @@ -33,13 +30,17 @@ msg_id/1]). %% Towards generated encoders (from diameter_gen.hrl). --export([pack_avp/1, +-export([pack_data/2, pack_avp/2]). -include_lib("diameter/include/diameter.hrl"). -include("diameter_internal.hrl"). --define(MASK(N,I), ((I) band (1 bsl (N)))). +-define(PAD(Len), ((4 - (Len rem 4)) rem 4)). +-define(BIT(B,I), (if B -> I; true -> 0 end)). +-define(BIT(B), ?BIT(B,1)). +-define(FLAGS(R,P,E,T), ?BIT(R):1, ?BIT(P):1, ?BIT(E):1, ?BIT(T):1, 0:4). +-define(FLAG(B,D), (if is_boolean(B) -> B; true -> 0 /= (D) end)). -type u32() :: 0..16#FFFFFFFF. -type u24() :: 0..16#FFFFFF. @@ -62,62 +63,29 @@ %% +-+-+-+-+-+-+-+-+-+-+-+-+- %%% --------------------------------------------------------------------------- -%%% # setopts/1 -%%% # getopt/1 +%%% # encode/2 %%% --------------------------------------------------------------------------- -%% These functions are a compromise in the same vein as the use of the -%% process dictionary in diameter_gen.hrl in generated codec modules. -%% Instead of rewriting the entire dictionary generation to pass -%% encode/decode options around, the calling process sets them by -%% calling setopts/1. At current, the only option is whether or not to -%% decode binaries as strings, which is used by diameter_types. - -setopts(Opts) - when is_list(Opts) -> - lists:foreach(fun setopt/1, Opts). - -%% The default string_decode true is for backwards compatibility. -setopt({K, false = B}) - when K == string_decode; - K == strict_mbit -> - setopt(K, B); - -%% Regard anything but the generated RFC 3588 dictionary as modern. -%% This affects the interpretation of defaults during the decode -%% of values of type DiameterURI, this having changed from RFC 3588. -%% (So much for backwards compatibility.) -setopt({common_dictionary, diameter_gen_base_rfc3588}) -> - setopt(rfc, 3588); - -setopt(_) -> - ok. - -setopt(Key, Value) -> - put({diameter, Key}, Value). - -getopt(Key) -> - case get({diameter, Key}) of - undefined when Key == string_decode; - Key == strict_mbit -> - true; - undefined when Key == rfc -> - 6733; - V -> - V - end. +%% The representative encode documented in diameter_codec(3). As of +%% the options that affect encode (eg. ordered_encode), it's no longer +%% *the* encode. + +encode(Mod, Msg) -> + encode(Mod, #{ordered_encode => true}, Msg). %%% --------------------------------------------------------------------------- -%%% # encode/2 +%%% # encode/3 %%% --------------------------------------------------------------------------- --spec encode(module(), Msg :: term()) +-spec encode(module(), + map(), + Msg :: term()) -> #diameter_packet{} | no_return(). -encode(Mod, #diameter_packet{} = Pkt) -> +encode(Mod, Opts, #diameter_packet{} = Pkt) -> try - e(Mod, Pkt) + enc(Mod, Opts, Pkt) catch exit: {Reason, Stack, #diameter_header{} = H} = T -> %% Exit with a header in the reason to let the caller @@ -130,91 +98,97 @@ encode(Mod, #diameter_packet{} = Pkt) -> exit({?MODULE, encode, T}) end; -encode(Mod, Msg) -> +encode(Mod, Opts, Msg) -> Seq = diameter_session:sequence(), Hdr = #diameter_header{version = ?DIAMETER_VERSION, end_to_end_id = Seq, hop_by_hop_id = Seq}, - encode(Mod, #diameter_packet{header = Hdr, - msg = Msg}). + encode(Mod, Opts, #diameter_packet{header = Hdr, + msg = Msg}). + +%% enc/3 -e(_, #diameter_packet{msg = [#diameter_header{} = Hdr | As]} = Pkt) -> - try encode_avps(reorder(As)) of +enc(_, Opts, #diameter_packet{msg = [#diameter_header{} = Hdr | As]} + = Pkt) -> + try encode_avps(reorder(As), Opts) of Avps -> - Length = size(Avps) + 20, + Bin = list_to_binary(Avps), + Len = 20 + size(Bin), #diameter_header{version = Vsn, + is_request = R, + is_proxiable = P, + is_error = E, + is_retransmitted = T, cmd_code = Code, application_id = Aid, hop_by_hop_id = Hid, end_to_end_id = Eid} = Hdr, - Flags = make_flags(0, Hdr), - Pkt#diameter_packet{header = Hdr, - bin = <<Vsn:8, Length:24, - Flags:8, Code:24, + bin = <<Vsn:8, Len:24, + ?FLAGS(R,P,E,T), Code:24, Aid:32, Hid:32, Eid:32, - Avps/binary>>} + Bin/binary>>} catch error: Reason -> exit({Reason, diameter_lib:get_stacktrace(), Hdr}) end; -e(Mod, #diameter_packet{header = Hdr0, msg = Msg} = Pkt) -> +enc(Mod, Opts, #diameter_packet{header = Hdr0, msg = Msg} = Pkt) -> + MsgName = rec2msg(Mod, Msg), + {Code, Flags, Aid} = msg_header(Mod, MsgName, Hdr0), + #diameter_header{version = Vsn, + is_request = R, + is_proxiable = P, + is_error = E, + is_retransmitted = T, hop_by_hop_id = Hid, end_to_end_id = Eid} = Hdr0, - MsgName = rec2msg(Mod, Msg), - {Code, Flags0, Aid} = msg_header(Mod, MsgName, Hdr0), - Flags = make_flags(Flags0, Hdr0), - Hdr = Hdr0#diameter_header{cmd_code = Code, - application_id = Aid, - is_request = 0 /= ?MASK(7, Flags), - is_proxiable = 0 /= ?MASK(6, Flags), - is_error = 0 /= ?MASK(5, Flags), - is_retransmitted = 0 /= ?MASK(4, Flags)}, + RB = ?FLAG(R, Flags band 2#10000000), + PB = ?FLAG(P, Flags band 2#01000000), + EB = ?FLAG(E, Flags band 2#00100000), + TB = ?FLAG(T, Flags band 2#00010000), + Values = values(Msg), - try encode_avps(Mod, MsgName, Values) of + try encode_avps(Mod, MsgName, Values, Opts) of Avps -> - Length = size(Avps) + 20, - Pkt#diameter_packet{header = Hdr#diameter_header{length = Length}, - bin = <<Vsn:8, Length:24, - Flags:8, Code:24, + Bin = list_to_binary(Avps), + Len = 20 + size(Bin), + + Hdr = Hdr0#diameter_header{length = Len, + cmd_code = Code, + application_id = Aid, + is_request = RB, + is_proxiable = PB, + is_error = EB, + is_retransmitted = TB}, + + Pkt#diameter_packet{header = Hdr, + bin = <<Vsn:8, Len:24, + ?FLAGS(RB, PB, EB, TB), Code:24, Aid:32, Hid:32, Eid:32, - Avps/binary>>} + Bin/binary>>} catch error: Reason -> + Hdr = Hdr0#diameter_header{cmd_code = Code, + application_id = Aid, + is_request = RB, + is_proxiable = PB, + is_error = EB, + is_retransmitted = TB}, exit({Reason, diameter_lib:get_stacktrace(), Hdr}) end. -%% make_flags/2 - -make_flags(Flags0, #diameter_header{is_request = R, - is_proxiable = P, - is_error = E, - is_retransmitted = T}) -> - {Flags, 3} = lists:foldl(fun(B,{F,N}) -> {mf(B,F,N), N-1} end, - {Flags0, 7}, - [R,P,E,T]), - Flags. - -mf(undefined, F, _) -> - F; -mf(B, F, N) -> %% reset the affected bit - (F bxor (F band (1 bsl N))) bor bit(B, N). - -bit(true, N) -> 1 bsl N; -bit(false, _) -> 0. - %% values/1 values([H|T]) @@ -223,7 +197,7 @@ values([H|T]) values(Avps) -> Avps. -%% encode_avps/3 +%% encode_avps/4 %% Specifying values as a #diameter_avp list bypasses arity and other %% checks: the values are expected to be already encoded and the AVP's @@ -231,12 +205,12 @@ values(Avps) -> %% these have to be able to resend whatever comes. %% Message as a list of #diameter_avp{} ... -encode_avps(_, _, [#diameter_avp{} | _] = Avps) -> - encode_avps(reorder(Avps)); +encode_avps(_, _, [#diameter_avp{} | _] = Avps, Opts) -> + encode_avps(reorder(Avps), Opts); %% ... or as a tuple list or record. -encode_avps(Mod, MsgName, Values) -> - Mod:encode_avps(MsgName, Values). +encode_avps(Mod, MsgName, Values, Opts) -> + Mod:encode_avps(MsgName, Values, Opts). %% reorder/1 %% @@ -277,10 +251,10 @@ reorder([H | T], Acc) -> reorder([], _) -> false. -%% encode_avps/1 +%% encode_avps/2 -encode_avps(Avps) -> - list_to_binary(lists:map(fun pack_avp/1, Avps)). +encode_avps(Avps, Opts) -> + [pack_avp(A, Opts) || A <- Avps]. %% msg_header/3 @@ -308,38 +282,50 @@ rec2msg(Mod, Rec) -> %%% # decode/2 %%% --------------------------------------------------------------------------- +%% The representative default decode documented in diameter_codec(3). +%% As of the options that affect decode (eg. string_decode), it's no +%% longer *the* decode. + +decode(Mod, Pkt) -> + Opts = #{string_decode => true, + strict_mbit => true, + rfc => 6733}, + decode(Mod, Opts, Pkt). + +%%% --------------------------------------------------------------------------- +%%% # decode/3 +%%% --------------------------------------------------------------------------- + %% Unsuccessfully decoded AVPs will be placed in #diameter_packet.errors. --spec decode(module() | {module(), module()}, #diameter_packet{} | binary()) +-spec decode(module() | {module(), module()}, + map(), + #diameter_packet{} | binary()) -> #diameter_packet{}. %% An Answer setting the E-bit. The application dictionary is needed -%% for the best-effort decode of Failed-AVP, and the best way to make -%% this available to the AVP decode in diameter_gen.hrl, without -%% having to rewrite the entire codec generation, is to place it in -%% the process dictionary. It's the code in diameter_gen.hrl (that's -%% included by every generated codec module) that looks for the entry. -%% Not ideal, but it solves the problem relatively simply. -decode({Mod, Mod}, Pkt) -> - decode(Mod, Pkt); -decode({Mod, AppMod}, Pkt) -> - Key = {?MODULE, dictionary}, - put(Key, AppMod), - try - decode(Mod, Pkt) - after - erase(Key) - end; +%% for the best-effort decode of Failed-AVP. +decode({Mod, AppMod}, Opts, Pkt) -> + decode(Mod, AppMod, Opts, Pkt); %% Or not: a request, or an answer not setting the E-bit. -decode(Mod, Pkt) -> - decode(Mod:id(), Mod, Pkt). +decode(Mod, Opts, Pkt) -> + decode(Mod, Mod, Opts, Pkt). + +%% decode/4 + +decode(Id, Mod, Opts, Pkt) + when is_integer(Id) -> + decode(Id, Mod, Mod, Opts, Pkt); -%% decode/3 +decode(Mod, AppMod, Opts, Pkt) -> + decode(Mod:id(), Mod, AppMod, Opts, Pkt). + +%% decode/5 %% Relay application: just extract the avp's without any decoding of %% their data since we don't know the application in question. -decode(?APP_ID_RELAY, _, #diameter_packet{} = Pkt) -> +decode(?APP_ID_RELAY, _, _, _, #diameter_packet{} = Pkt) -> case collect_avps(Pkt) of {E, As} -> Pkt#diameter_packet{avps = As, @@ -349,7 +335,7 @@ decode(?APP_ID_RELAY, _, #diameter_packet{} = Pkt) -> end; %% Otherwise decode using the dictionary. -decode(_, Mod, #diameter_packet{header = Hdr} = Pkt) -> +decode(_, Mod, AppMod, Opts, #diameter_packet{header = Hdr} = Pkt) -> #diameter_header{cmd_code = CmdCode, is_request = IsRequest, is_error = IsError} @@ -361,29 +347,33 @@ decode(_, Mod, #diameter_packet{header = Hdr} = Pkt) -> Mod:msg_name(CmdCode, IsRequest) end, - decode_avps(MsgName, Mod, Pkt, collect_avps(Pkt)); + decode_avps(MsgName, Mod, AppMod, Opts, Pkt, collect_avps(Pkt)); -decode(Id, Mod, Bin) +decode(Id, Mod, AppMod, Opts, Bin) when is_binary(Bin) -> - decode(Id, Mod, #diameter_packet{header = decode_header(Bin), bin = Bin}). + decode(Id, Mod, AppMod, Opts, #diameter_packet{header = decode_header(Bin), + bin = Bin}). -%% decode_avps/4 +%% decode_avps/6 -decode_avps(MsgName, Mod, Pkt, {E, Avps}) -> +decode_avps(MsgName, Mod, AppMod, Opts, Pkt, {E, Avps}) -> ?LOG(invalid_avp_length, Pkt#diameter_packet.header), #diameter_packet{errors = Failed} = P - = decode_avps(MsgName, Mod, Pkt, Avps), + = decode_avps(MsgName, Mod, AppMod, Opts, Pkt, Avps), P#diameter_packet{errors = [E | Failed]}; -decode_avps('', _, Pkt, Avps) -> %% unknown message ... +decode_avps('', _, _, _, Pkt, Avps) -> %% unknown message ... ?LOG(unknown_message, Pkt#diameter_packet.header), Pkt#diameter_packet{avps = lists:reverse(Avps), errors = [3001]}; %% DIAMETER_COMMAND_UNSUPPORTED %% msg = undefined identifies this case. -decode_avps(MsgName, Mod, Pkt, Avps) -> %% ... or not - {Rec, As, Errors} = Mod:decode_avps(MsgName, Avps), +decode_avps(MsgName, Mod, AppMod, Opts, Pkt, Avps) -> %% ... or not + {Rec, As, Errors} = Mod:decode_avps(MsgName, + Avps, + Opts#{dictionary => AppMod, + failed_avp => false}), ?LOGC([] /= Errors, decode_errors, Pkt#diameter_packet.header), Pkt#diameter_packet{msg = Rec, errors = Errors, @@ -399,14 +389,12 @@ decode_avps(MsgName, Mod, Pkt, Avps) -> %% ... or not decode_header(<<Version:8, MsgLength:24, - CmdFlags:1/binary, + R:1, P:1, E:1, T:1, _:4, CmdCode:24, ApplicationId:32, HopByHopId:32, EndToEndId:32, _/binary>>) -> - <<R:1, P:1, E:1, T:1, _:4>> - = CmdFlags, %% 3588 (ch 3) says that reserved bits MUST be set to 0 and ignored %% by the receiver. @@ -518,7 +506,7 @@ msg_id(#diameter_packet{header = #diameter_header{} = Hdr}) -> msg_id(#diameter_header{application_id = A, cmd_code = C, is_request = R}) -> - {A, C, if R -> 1; true -> 0 end}; + {A, C, ?BIT(R)}; msg_id(<<_:32, Rbit:1, _:7, CmdCode:24, ApplId:32, _/binary>>) -> {ApplId, CmdCode, Rbit}. @@ -537,24 +525,14 @@ msg_id(<<_:32, Rbit:1, _:7, CmdCode:24, ApplId:32, _/binary>>) -> when Avp :: #diameter_avp{}, Error :: {5014, #diameter_avp{}}. -collect_avps(#diameter_packet{bin = Bin}) -> - <<_:20/binary, Avps/binary>> = Bin, - collect_avps(Avps); +collect_avps(#diameter_packet{bin = <<_:20/binary, Avps/binary>>}) -> + collect_avps(Avps, 0, []); collect_avps(Bin) when is_binary(Bin) -> collect_avps(Bin, 0, []). -collect_avps(<<>>, _, Acc) -> - Acc; -collect_avps(Bin, N, Acc) -> - try split_avp(Bin) of - {Rest, AVP} -> - collect_avps(Rest, N+1, [AVP#diameter_avp{index = N} | Acc]) - catch - ?FAILURE(Error) -> - {Error, Acc} - end. +%% collect_avps/3 %% 0 1 2 3 %% 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 @@ -568,32 +546,65 @@ collect_avps(Bin, N, Acc) -> %% | Data ... %% +-+-+-+-+-+-+-+-+ -%% split_avp/1 +collect_avps(<<Code:32, V:1, M:1, P:1, _:5, Len:24, I:V/unit:32, Rest/binary>>, + N, + Acc) -> + collect_avps(Code, + if 1 == V -> I; 0 == V -> undefined end, + 1 == M, + 1 == P, + Len - 8 - V*4, %% Might be negative, which ensures + ?PAD(Len), %% failure of the Data match below. + Rest, + N, + Acc); -split_avp(Bin) -> - {Code, V, M, P, Len, HdrLen} = split_head(Bin), - - <<_:HdrLen/binary, Rest/binary>> = Bin, - {Data, B} = split_data(Rest, Len - HdrLen), - - {B, #diameter_avp{code = Code, - vendor_id = V, - is_mandatory = 1 == M, - need_encryption = 1 == P, - data = Data}}. - -%% split_head/1 - -split_head(<<Code:32, 1:1, M:1, P:1, _:5, Len:24, V:32, _/binary>>) -> - {Code, V, M, P, Len, 12}; +collect_avps(<<>>, _, Acc) -> + Acc; -split_head(<<Code:32, 0:1, M:1, P:1, _:5, Len:24, _/binary>>) -> - {Code, undefined, M, P, Len, 8}; +%% Header is truncated. pack_avp/1 will pad this at encode if sent in +%% a Failed-AVP. +collect_avps(Bin, _, Acc) -> + {{5014, #diameter_avp{data = Bin}}, Acc}. + +%% collect_avps/9 + +%% Duplicate the diameter_avp creation in each branch below to avoid +%% modifying the record, which profiling has shown to be a relatively +%% costly part of building the list. + +collect_avps(Code, VendorId, M, P, Len, Pad, Rest, N, Acc) -> + case Rest of + <<Data:Len/binary, _:Pad/binary, T/binary>> -> + Avp = #diameter_avp{code = Code, + vendor_id = VendorId, + is_mandatory = M, + need_encryption = P, + data = Data, + index = N}, + collect_avps(T, N+1, [Avp | Acc]); + _ -> + %% Length in header points past the end of the message, or + %% doesn't span the header. As stated in the 6733 text + %% above, it's sufficient to return a zero-filled minimal + %% payload if this is a request. Do this (in cases that we + %% know the type) by inducing a decode failure and letting + %% the dictionary's decode (in diameter_gen) deal with it. + %% + %% Note that the extra bit can only occur in the trailing + %% AVP of a message or Grouped AVP, since a faulty AVP + %% Length is otherwise indistinguishable from a correct + %% one here, as we don't know the types of the AVPs being + %% extracted. + Avp = #diameter_avp{code = Code, + vendor_id = VendorId, + is_mandatory = M, + need_encryption = P, + data = {5014, Rest}, + index = N}, + [Avp | Acc] + end. -%% Header is truncated. -split_head(Bin) -> - ?THROW({5014, #diameter_avp{data = Bin}}). -%% Note that pack_avp/1 will pad this at encode if sent in a Failed-AVP. %% 3588: %% @@ -626,35 +637,8 @@ split_head(Bin) -> %% the minimum value mean we might not know the identity of the AVP and %% (2) the last sentence covers this case. -%% split_data/3 - -split_data(Bin, Len) -> - Pad = (4 - (Len rem 4)) rem 4, - - %% Len might be negative here, but that ensures the failure of the - %% binary match. - - case Bin of - <<Data:Len/binary, _:Pad/binary, Rest/binary>> -> - {Data, Rest}; - _ -> - %% Header length points past the end of the message, or - %% doesn't span the header. As stated in the 6733 text - %% above, it's sufficient to return a zero-filled minimal - %% payload if this is a request. Do this (in cases that we - %% know the type) by inducing a decode failure and letting - %% the dictionary's decode (in diameter_gen) deal with it. - %% - %% Note that the extra bit can only occur in the trailing - %% AVP of a message or Grouped AVP, since a faulty AVP - %% Length is otherwise indistinguishable from a correct - %% one here, since we don't know the types of the AVPs - %% being extracted. - {<<0:1, Bin/binary>>, <<>>} - end. - %%% --------------------------------------------------------------------------- -%%% # pack_avp/1 +%%% # pack_avp/2 %%% --------------------------------------------------------------------------- %% The normal case here is data as an #diameter_avp{} list or an @@ -664,104 +648,96 @@ split_data(Bin, Len) -> %% Decoded Grouped AVP with decoded components: ignore components %% since they're already encoded in the Grouped AVP. -pack_avp([#diameter_avp{} = Grouped | _Components]) -> - pack_avp(Grouped); +pack_avp([#diameter_avp{} = Grouped | _Components], Opts) -> + pack_avp(Grouped, Opts); %% Grouped AVP whose components need packing. It's intentional that %% this isn't equivalent to [Grouped | Components]: here the %% components need to be encoded before wrapping with the Grouped AVP, %% and the list is flat, nesting being accomplished in the data %% fields. -pack_avp(#diameter_avp{data = [#diameter_avp{} | _] = Components} = Grouped) -> - pack_avp(Grouped#diameter_avp{data = encode_avps(Components)}); +pack_avp(#diameter_avp{data = [#diameter_avp{} | _] = Components} + = Grouped, + Opts) -> + pack_data(Grouped, encode_avps(Components, Opts)); %% Data as a type/value tuple ... -pack_avp(#diameter_avp{data = {Type, Value}} = A) +pack_avp(#diameter_avp{data = {Type, Value}} = A, Opts) when is_atom(Type) -> - pack_avp(A#diameter_avp{data = diameter_types:Type(encode, Value)}); + pack_data(A, diameter_types:Type(encode, Value, Opts)); %% ... with a header in various forms ... -pack_avp(#diameter_avp{data = {{_,_,_} = T, {Type, Value}}}) -> - pack_avp(T, iolist_to_binary(diameter_types:Type(encode, Value))); +pack_avp(#diameter_avp{data = {T, {Type, Value}}}, Opts) -> + pack_data(T, diameter_types:Type(encode, Value, Opts)); -pack_avp(#diameter_avp{data = {{_,_,_} = T, Bin}}) - when is_binary(Bin) -> - pack_avp(T, Bin); +pack_avp(#diameter_avp{data = {T, Data}}, _) -> + pack_data(T, Data); -pack_avp(#diameter_avp{data = {Dict, Name, Value}} = A) -> - {Code, _Flags, Vid} = Hdr = Dict:avp_header(Name), - {Name, Type} = Dict:avp_name(Code, Vid), - pack_avp(A#diameter_avp{data = {Hdr, {Type, Value}}}); +pack_avp(#diameter_avp{data = {Dict, Name, Data}}, Opts) -> + pack_data(Dict:avp_header(Name), Dict:avp(encode, Data, Name, Opts)); %% ... with a truncated header ... -pack_avp(#diameter_avp{code = undefined, data = B}) +pack_avp(#diameter_avp{code = undefined, data = B}, _) when is_binary(B) -> %% Reset the AVP Length of an AVP Header resulting from a 5014 %% error. The RFC doesn't explicitly say to do this but the %% receiver can't correctly extract this and following AVP's %% without a correct length. On the downside, the header doesn't - %% reveal if the received header has been padded. - Pad = 8*header_length(B) - bit_size(B), - Len = size(<<H:5/binary, _:24, T/binary>> = <<B/binary, 0:Pad>>), - <<H/binary, Len:24, T/binary>>; - -%% ... when ignoring errors in Failed-AVP ... -%% ... during a relay encode ... -pack_avp(#diameter_avp{data = <<0:1, B/binary>>} = A) -> - pack_avp(A#diameter_avp{data = B}); - -%% ... or as an iolist. -pack_avp(#diameter_avp{code = Code, - vendor_id = V, - is_mandatory = M, - need_encryption = P, - data = Data}) -> - Flags = lists:foldl(fun flag_avp/2, 0, [{V /= undefined, 2#10000000}, - {M, 2#01000000}, - {P, 2#00100000}]), - pack_avp({Code, Flags, V}, iolist_to_binary(Data)). - -header_length(<<_:32, 1:1, _/bitstring>>) -> + %% reveal if the received header has been padded. Discard bytes + %% from the length header for this reason, to avoid creating a sub + %% binary for no useful reason. + Len = header_length(B), + Sz = min(5, size(B)), + <<B:Sz/binary, 0:(5-Sz)/unit:8, Len:24, 0:(Len-8)/unit:8>>; + +%% Ignoring errors in Failed-AVP or during a relay encode. +pack_avp(#diameter_avp{data = {5014, Data}} = A, _) -> + pack_data(A, Data); + +pack_avp(#diameter_avp{data = Data} = A, _) -> + pack_data(A, Data). + +header_length(<<_:32, 1:1, _/bits>>) -> 12; header_length(_) -> 8. -flag_avp({true, B}, F) -> - F bor B; -flag_avp({false, _}, F) -> - F. - %%% --------------------------------------------------------------------------- -%%% # pack_avp/2 +%%% # pack_data/2 %%% --------------------------------------------------------------------------- -pack_avp({Code, Flags, VendorId}, Bin) - when is_binary(Bin) -> - Sz = size(Bin), - pack_avp(Code, Flags, VendorId, Sz, pad(Sz rem 4, Bin)). - -pad(0, Bin) -> - Bin; -pad(N, Bin) -> - P = 8*(4-N), - <<Bin/binary, 0:P>>. -%% Note that padding is not included in the length field as mandated by -%% the RFC. - -%% pack_avp/5 +pack_data(#diameter_avp{code = Code, + vendor_id = V, + is_mandatory = M, + need_encryption = P}, + Data) -> + Flags = ?BIT(V /= undefined, 2#10000000) + bor ?BIT(M, 2#01000000) + bor ?BIT(P, 2#00100000), + pack(Code, Flags, V, Data); + +pack_data({Code, Flags, VendorId}, Data) -> + pack(Code, Flags, VendorId, Data). + +%% pack/4 + +pack(Code, Flags, VendorId, Data) -> + Sz = iolist_size(Data), + pack(Code, Flags, Sz, VendorId, Data, ?PAD(Sz)). +%% Padding is not included in the length field, as mandated by the RFC. + +%% pack/6 %% %% Prepend the vendor id as required. -pack_avp(Code, Flags, Vid, Sz, Bin) +pack(Code, Flags, Sz, _Vid, Data, Pad) when 0 == Flags band 2#10000000 -> - undefined = Vid, %% sanity check - pack_avp(Code, Flags, Sz, Bin); + pack(Code, Flags, Sz, 0, 0, Data, Pad); -pack_avp(Code, Flags, Vid, Sz, Bin) -> - pack_avp(Code, Flags, Sz+4, <<Vid:32, Bin/binary>>). +pack(Code, Flags, Sz, Vid, Data, Pad) -> + pack(Code, Flags, Sz+4, Vid, 1, Data, Pad). -%% pack_avp/4 +%% pack/7 -pack_avp(Code, Flags, Sz, Bin) -> - Length = Sz + 8, - <<Code:32, Flags:8, Length:24, Bin/binary>>. +pack(Code, Flags, Sz, VId, V, Data, Pad) -> + [<<Code:32, Flags:8, (8+Sz):24, VId:V/unit:32>>, Data, <<0:Pad/unit:8>>]. diff --git a/lib/diameter/src/base/diameter_config.erl b/lib/diameter/src/base/diameter_config.erl index fdbbd412a1..34018ae6d3 100644 --- a/lib/diameter/src/base/diameter_config.erl +++ b/lib/diameter/src/base/diameter_config.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -277,7 +277,7 @@ start_link() -> start_link(T) -> proc_lib:start_link(?MODULE, init, [T], infinity, []). - + state() -> call(state). @@ -535,12 +535,12 @@ stop(SvcName) -> %% restrict applications so that that there's one while the service %% has many. -add(SvcName, Type, Opts) -> +add(SvcName, Type, Opts0) -> %% Ensure acceptable transport options. This won't catch all %% possible errors (faulty callbacks for example) but it catches %% many. diameter_service:merge_service/2 depends on usable %% capabilities for example. - ok = transport_opts(Opts), + Opts = transport_opts(Opts0), Ref = make_ref(), true = diameter_reg:add_new(?TRANSPORT_KEY(Ref)), @@ -560,7 +560,17 @@ add(SvcName, Type, Opts) -> end. transport_opts(Opts) -> - lists:foreach(fun(T) -> opt(T) orelse ?THROW({invalid, T}) end, Opts). + lists:map(fun topt/1, Opts). + +topt(T) -> + case opt(T) of + {value, X} -> + X; + true -> + T; + false -> + ?THROW({invalid, T}) + end. opt({transport_module, M}) -> is_atom(M); @@ -580,6 +590,9 @@ opt({K, Tmo}) K == dpa_timeout -> ?IS_UINT32(Tmo); +opt({capx_strictness, B}) -> + is_boolean(B); + opt({length_errors, T}) -> lists:member(T, [exit, handle, discard]); @@ -597,8 +610,15 @@ opt({watchdog_timer, Tmo}) -> opt({watchdog_config, L}) -> is_list(L) andalso lists:all(fun wdopt/1, L); -opt({spawn_opt, Opts}) -> - is_list(Opts); +opt({spawn_opt, {M,F,A}}) + when is_atom(M), is_atom(F), is_list(A) -> + true; +opt({spawn_opt = K, Opts}) -> + if is_list(Opts) -> + {value, {K, spawn_opts(Opts)}}; + true -> + false + end; opt({pool_size, N}) -> is_integer(N) andalso 0 < N; @@ -673,7 +693,7 @@ stop_transport(SvcName, Refs) -> make_config(SvcName, Opts) -> AppOpts = [T || {application, _} = T <- Opts], - Apps = init_apps(AppOpts), + Apps = [init_app(T) || T <- AppOpts], [] == Apps andalso ?THROW(no_apps), @@ -722,9 +742,13 @@ opt(incoming_maxlen, N) when 0 =< N, N < 1 bsl 24 -> N; +opt(spawn_opt, {M,F,A} = T) + when is_atom(M), is_atom(F), is_list(A) -> + T; + opt(spawn_opt, L) when is_list(L) -> - L; + spawn_opts(L); opt(K, false = B) when K == share_peers; @@ -786,6 +810,9 @@ opt(sequence = K, F) -> opt(K, _) -> ?THROW({value, K}). +spawn_opts(L) -> + [T || T <- L, T /= link, T /= monitor]. + sequence({H,N} = T) when 0 =< N, N =< 32, 0 =< H, 0 == H bsr (32-N) -> T; @@ -819,10 +846,7 @@ encode_CER(Opts) -> ?THROW(Reason) end. -init_apps(Opts) -> - lists:foldl(fun app_acc/2, [], lists:reverse(Opts)). - -app_acc({application, Opts} = T, Acc) -> +init_app({application, Opts} = T) -> is_list(Opts) orelse ?THROW(T), [Dict, Mod] = get_opt([dictionary, module], Opts), @@ -831,15 +855,14 @@ app_acc({application, Opts} = T, Acc) -> M = get_opt(call_mutates_state, Opts, false, [true]), A = get_opt(answer_errors, Opts, discard, [callback, report]), P = get_opt(request_errors, Opts, answer_3xxx, [answer, callback]), - [#diameter_app{alias = Alias, - dictionary = Dict, - id = cb(Dict, id), - module = init_mod(Mod), - init_state = ModS, - mutable = M, - options = [{answer_errors, A}, - {request_errors, P}]} - | Acc]. + #diameter_app{alias = Alias, + dictionary = Dict, + id = cb(Dict, id), + module = init_mod(Mod), + init_state = ModS, + mutable = M, + options = [{answer_errors, A}, + {request_errors, P}]}. init_mod(#diameter_callback{} = R) -> init_mod([diameter_callback, R]); @@ -865,7 +888,7 @@ init_cb(List) -> V <- [proplists:get_value(F, List, D)]], #diameter_callback{} = list_to_tuple([diameter_callback | Values]). -%% Retreive and validate. +%% Retrieve and validate. get_opt(Key, List, Def, Other) -> init_opt(Key, get_opt(Key, List, Def), [Def|Other]). diff --git a/lib/diameter/src/base/diameter_dict.erl b/lib/diameter/src/base/diameter_dict.erl deleted file mode 100644 index 7db294a1b1..0000000000 --- a/lib/diameter/src/base/diameter_dict.erl +++ /dev/null @@ -1,154 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% - -%% -%% This module provide OTP's dict interface built on top of ets. -%% -%% Note that while the interface is the same as dict the semantics -%% aren't quite. A Dict here is just a table identifier (although -%% this fact can't be used if you want dict/ets-based implementations -%% to be interchangeable) so changes made to the Dict modify the -%% underlying table. For merge/3, the first argument table is modified. -%% -%% The underlying ets table implementing a dict is deleted when the -%% process from which new() was invoked exits and the dict is only -%% writable from this process. -%% -%% The reason for this is to be able to swap dict/ets-based -%% implementations: the former is easier to debug, the latter is -%% faster for larger tables. It's also just a nice interface even -%% when there's no need for swapability. -%% - --module(diameter_dict). - --export([append/3, - append_list/3, - erase/2, - fetch/2, - fetch_keys/1, - filter/2, - find/2, - fold/3, - from_list/1, - is_key/2, - map/2, - merge/3, - new/0, - store/3, - to_list/1, - update/3, - update/4, - update_counter/3]). - -%%% ---------------------------------------------------------- -%%% EXPORTED INTERNAL FUNCTIONS -%%% ---------------------------------------------------------- - -append(Key, Value, Dict) -> - append_list(Key, [Value], Dict). - -append_list(Key, ValueList, Dict) - when is_list(ValueList) -> - update(Key, fun(V) -> V ++ ValueList end, ValueList, Dict). - -erase(Key, Dict) -> - ets:delete(Dict, Key), - Dict. - -fetch(Key, Dict) -> - {ok, V} = find(Key, Dict), - V. - -fetch_keys(Dict) -> - ets:foldl(fun({K,_}, Acc) -> [K | Acc] end, [], Dict). - -filter(Pred, Dict) -> - lists:foreach(fun({K,V}) -> filter(Pred(K,V), K, Dict) end, to_list(Dict)), - Dict. - -find(Key, Dict) -> - case ets:lookup(Dict, Key) of - [{Key, V}] -> - {ok, V}; - [] -> - error - end. - -fold(Fun, Acc0, Dict) -> - ets:foldl(fun({K,V}, Acc) -> Fun(K, V, Acc) end, Acc0, Dict). - -from_list(List) -> - lists:foldl(fun store/2, new(), List). - -is_key(Key, Dict) -> - ets:member(Dict, Key). - -map(Fun, Dict) -> - lists:foreach(fun({K,V}) -> store(K, Fun(K,V), Dict) end, to_list(Dict)), - Dict. - -merge(Fun, Dict1, Dict2) -> - fold(fun(K2,V2,_) -> - update(K2, fun(V1) -> Fun(K2, V1, V2) end, V2, Dict1) - end, - Dict1, - Dict2). - -new() -> - ets:new(?MODULE, [set]). - -store(Key, Value, Dict) -> - store({Key, Value}, Dict). - -to_list(Dict) -> - ets:tab2list(Dict). - -update(Key, Fun, Dict) -> - store(Key, Fun(fetch(Key, Dict)), Dict). - -update(Key, Fun, Initial, Dict) -> - store(Key, map(Key, Fun, Dict, Initial), Dict). - -update_counter(Key, Increment, Dict) - when is_integer(Increment) -> - update(Key, fun(V) -> V + Increment end, Increment, Dict). - -%%% --------------------------------------------------------- -%%% INTERNAL FUNCTIONS -%%% --------------------------------------------------------- - -store({_,_} = T, Dict) -> - ets:insert(Dict, T), - Dict. - -filter(true, _, _) -> - ok; -filter(false, K, Dict) -> - erase(K, Dict). - -map(Key, Fun, Dict, Error) -> - case find(Key, Dict) of - {ok, V} -> - Fun(V); - error -> - Error - end. - diff --git a/lib/diameter/src/base/diameter_gen.erl b/lib/diameter/src/base/diameter_gen.erl new file mode 100644 index 0000000000..e832832876 --- /dev/null +++ b/lib/diameter/src/base/diameter_gen.erl @@ -0,0 +1,709 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% + +%% +%% This file contains code that encode/decode modules generated by +%% diameter_codegen.erl calls to implement the functionality. This +%% code does most of the work, the generated code being kept simple. +%% + +-module(diameter_gen). + +-export([encode_avps/3, + decode_avps/3, + grouped_avp/4, + empty_group/2, + empty/2]). + +-include_lib("diameter/include/diameter.hrl"). + +-define(THROW(T), throw({?MODULE, T})). + +-type parent_name() :: atom(). %% parent = Message or AVP +-type parent_record() :: tuple(). %% +-type avp_name() :: atom(). +-type avp_record() :: tuple(). +-type avp_values() :: [{avp_name(), term()}]. + +-type non_grouped_avp() :: #diameter_avp{}. +-type grouped_avp() :: nonempty_improper_list(#diameter_avp{}, [avp()]). +-type avp() :: non_grouped_avp() | grouped_avp(). + +%% --------------------------------------------------------------------------- +%% # encode_avps/3 +%% --------------------------------------------------------------------------- + +-spec encode_avps(parent_name(), parent_record() | avp_values(), map()) + -> iolist() + | no_return(). + +encode_avps(Name, Vals, #{module := Mod} = Opts) -> + try + encode(Name, Vals, Opts, Mod) + catch + throw: {?MODULE, Reason} -> + diameter_lib:log({encode, error}, + ?MODULE, + ?LINE, + {Reason, Name, Vals, Mod}), + erlang:error(list_to_tuple(Reason ++ [Name])); + error: Reason -> + Stack = erlang:get_stacktrace(), + diameter_lib:log({encode, failure}, + ?MODULE, + ?LINE, + {Reason, Name, Vals, Mod, Stack}), + erlang:error({encode_failure, Reason, Name, Stack}) + end. + +%% encode/4 + +encode(Name, Vals, #{ordered_encode := false} = Opts, Mod) + when is_list(Vals) -> + lists:map(fun({F,V}) -> encode(Name, F, V, Opts, Mod) end, Vals); + +encode(Name, Vals, Opts, Mod) + when is_list(Vals) -> + encode(Name, Mod:'#set-'(Vals, newrec(Mod, Name)), Opts, Mod); + +encode(Name, Rec, Opts, Mod) -> + [encode(Name, F, V, Opts, Mod) || {F,V} <- Mod:'#get-'(Rec)]. + +%% encode/5 + +encode(Name, AvpName, Values, Opts, Mod) -> + enc(Name, AvpName, Mod:avp_arity(Name, AvpName), Values, Opts, Mod). + +%% enc/6 + +enc(_, AvpName, 1, undefined, _, _) -> + ?THROW([mandatory_avp_missing, AvpName]); + +enc(Name, AvpName, 1, Value, Opts, Mod) -> + enc(Name, AvpName, [Value], Opts, Mod); + +enc(_, _, {0,_}, [], _, _) -> + []; + +enc(_, AvpName, _, T, _, _) + when not is_list(T) -> + ?THROW([repeated_avp_as_non_list, AvpName, T]); + +enc(_, AvpName, {Min, _}, L, _, _) + when length(L) < Min -> + ?THROW([repeated_avp_insufficient_arity, AvpName, Min, L]); + +enc(_, AvpName, {_, Max}, L, _, _) + when Max < length(L) -> + ?THROW([repeated_avp_excessive_arity, AvpName, Max, L]); + +enc(Name, AvpName, _, Values, Opts, Mod) -> + enc(Name, AvpName, Values, Opts, Mod). + +%% enc/5 + +enc(Name, 'AVP', Values, Opts, Mod) -> + [enc_AVP(Name, A, Opts, Mod) || A <- Values]; + +enc(_, AvpName, Values, Opts, Mod) -> + enc(AvpName, Values, Opts, Mod). + +%% enc/4 + +enc(AvpName, Values, Opts, Mod) -> + H = Mod:avp_header(AvpName), + [diameter_codec:pack_data(H, Mod:avp(encode, V, AvpName, Opts)) + || V <- Values]. + +%% enc_AVP/4 + +%% No value: assume AVP data is already encoded. The normal case will +%% be when this is passed back from #diameter_packet.errors as a +%% consequence of a failed decode. Any AVP can be encoded this way +%% however, which side-steps any arity checks for known AVP's and +%% could potentially encode something unfortunate. +enc_AVP(_, #diameter_avp{value = undefined} = A, Opts, _) -> + diameter_codec:pack_avp(A, Opts); + +%% Missing name for value encode. +enc_AVP(_, #diameter_avp{name = N, value = V}, _, _) + when N == undefined; + N == 'AVP' -> + ?THROW([value_with_nameless_avp, N, V]); + +%% Or not. Ensure that 'AVP' is the appropriate field. Note that if we +%% don't know this AVP at all then the encode will fail. +enc_AVP(Name, #diameter_avp{name = AvpName, value = Data}, Opts, Mod) -> + 0 == Mod:avp_arity(Name, AvpName) + orelse ?THROW([known_avp_as_AVP, Name, AvpName, Data]), + enc(AvpName, [Data], Opts, Mod); + +%% The backdoor ... +enc_AVP(_, {AvpName, Value}, Opts, Mod) -> + enc(AvpName, [Value], Opts, Mod); + +%% ... and the side door. +enc_AVP(_Name, {_Dict, _AvpName, _Data} = T, Opts, _) -> + diameter_codec:pack_avp(#diameter_avp{data = T}, Opts). + +%% --------------------------------------------------------------------------- +%% # decode_avps/3 +%% --------------------------------------------------------------------------- + +-spec decode_avps(parent_name(), [#diameter_avp{}], map()) + -> {parent_record(), [avp()], Failed} + when Failed :: [{5000..5999, #diameter_avp{}}]. + +decode_avps(Name, Recs, #{module := Mod} = Opts) -> + {Avps, {Rec, Failed}} + = mapfoldl(fun(T,A) -> decode(Name, Opts, Mod, T, A) end, + {newrec(Mod, Name), []}, + Recs), + {Rec, Avps, Failed ++ missing(Rec, Name, Failed, Opts, Mod)}. +%% Append 5005 errors so that errors are reported in the order +%% encountered. Failed-AVP should typically contain the first +%% encountered error accordg to the RFC. + +%% mapfoldl/3 +%% +%% Like lists:mapfoldl/3, but don't reverse the list. + +mapfoldl(F, Acc, List) -> + mapfoldl(F, Acc, List, []). + +mapfoldl(F, Acc0, [T|Rest], List) -> + {B, Acc} = F(T, Acc0), + mapfoldl(F, Acc, Rest, [B|List]); +mapfoldl(_, Acc, [], List) -> + {List, Acc}. + +%% 3588: +%% +%% DIAMETER_MISSING_AVP 5005 +%% The request did not contain an AVP that is required by the Command +%% Code definition. If this value is sent in the Result-Code AVP, a +%% Failed-AVP AVP SHOULD be included in the message. The Failed-AVP +%% AVP MUST contain an example of the missing AVP complete with the +%% Vendor-Id if applicable. The value field of the missing AVP +%% should be of correct minimum length and contain zeros. + +missing(Rec, Name, Failed, Opts, Mod) -> + Avps = lists:foldl(fun({_, #diameter_avp{code = C, vendor_id = V}}, A) -> + maps:put({C,V}, true, A) + end, + maps:new(), + Failed), + missing(Mod:avp_arity(Name), tl(tuple_to_list(Rec)), Avps, Opts, Mod, []). + +missing([{Name, Arity} | As], [Value | Vs], Avps, Opts, Mod, Acc) -> + missing(As, + Vs, + Avps, + Opts, + Mod, + case + [H || missing_arity(Arity, Value), + {C,_,V} = H <- [Mod:avp_header(Name)], + not maps:is_key({C,V}, Avps)] + of + [H] -> + [{5005, empty_avp(Name, H, Opts, Mod)} | Acc]; + [] -> + Acc + end); + +missing([], [], _, _, _, Acc) -> + Acc. + +%% Maximum arities have already been checked in building the record. + +missing_arity(1, V) -> + V == undefined; +missing_arity({0, _}, _) -> + false; +missing_arity({1, _}, L) -> + [] == L; +missing_arity({Min, _}, L) -> + not has_prefix(Min, L). + +%% Compare a non-negative integer and the length of a list without +%% computing the length. +has_prefix(0, _) -> + true; +has_prefix(_, []) -> + false; +has_prefix(N, [_|L]) -> + has_prefix(N-1, L). + +%% empty_avp/4 + +empty_avp(Name, {Code, Flags, VId}, Opts, Mod) -> + {Name, Type} = Mod:avp_name(Code, VId), + #diameter_avp{name = Name, + code = Code, + vendor_id = VId, + is_mandatory = 0 /= (Flags band 2#01000000), + need_encryption = 0 /= (Flags band 2#00100000), + data = Mod:empty_value(Name, Opts), + type = Type}. + +%% 3588, ch 7: +%% +%% The Result-Code AVP describes the error that the Diameter node +%% encountered in its processing. In case there are multiple errors, +%% the Diameter node MUST report only the first error it encountered +%% (detected possibly in some implementation dependent order). The +%% specific errors that can be described by this AVP are described in +%% the following section. + +%% decode/5 + +decode(Name, + Opts, + Mod, + #diameter_avp{code = Code, vendor_id = Vid} + = Avp, + Acc) -> + decode(Name, Opts, Mod, Mod:avp_name(Code, Vid), Avp, Acc). + +%% decode/6 + +%% AVP not in dictionary. +decode(Name, Opts, Mod, 'AVP', Avp, Acc) -> + decode_AVP(Name, Avp, Opts, Mod, Acc); + +%% 6733, 4.4: +%% +%% Receivers of a Grouped AVP that does not have the 'M' (mandatory) +%% bit set and one or more of the encapsulated AVPs within the group +%% has the 'M' (mandatory) bit set MAY simply be ignored if the +%% Grouped AVP itself is unrecognized. The rule applies even if the +%% encapsulated AVP with its 'M' (mandatory) bit set is further +%% encapsulated within other sub-groups, i.e., other Grouped AVPs +%% embedded within the Grouped AVP. +%% +%% The first sentence is slightly mangled, but take it to mean this: +%% +%% An unrecognized AVP of type Grouped that does not set the 'M' bit +%% MAY be ignored even if one of its encapsulated AVPs sets the 'M' +%% bit. +%% +%% The text above is a change from RFC 3588, which instead says this: +%% +%% Further, if any of the AVPs encapsulated within a Grouped AVP has +%% the 'M' (mandatory) bit set, the Grouped AVP itself MUST also +%% include the 'M' bit set. +%% +%% Both of these texts have problems. If the AVP is unknown then its +%% type is unknown since the type isn't sent over the wire, so the +%% 6733 text becomes a non-statement: don't know that the AVP not +%% setting the M-bit is of type Grouped, therefore can't know that its +%% data consists of encapsulated AVPs, therefore can't but ignore that +%% one of these might set the M-bit. It should be no worse if we know +%% the AVP to have type Grouped. +%% +%% Similarly, for the 3588 text: if we receive an AVP that doesn't set +%% the M-bit and don't know that the AVP has type Grouped then we +%% can't realize that its data contains an AVP that sets the M-bit, so +%% can't regard the AVP as erroneous on this account. Again, it should +%% be no worse if the type is known to be Grouped, but in this case +%% the RFC forces us to regard the AVP as erroneous. This is +%% inconsistent, and the 3588 text has never been enforced. +%% +%% So, if an AVP doesn't set the M-bit then we're free to ignore it, +%% regardless of the AVP's type. If we know the type to be Grouped +%% then we must ignore the M-bit on an encapsulated AVP. That means +%% packing such an encapsulated AVP into an 'AVP' field if need be, +%% not regarding the lack of a specific field as an error as is +%% otherwise the case. (The lack of an AVP-specific field being how we +%% defined the RFC's "unrecognized", which is slightly stronger than +%% "not defined".) + +decode(Name, Opts0, Mod, {AvpName, Type}, Avp, Acc) -> + #diameter_avp{data = Data, is_mandatory = M} + = Avp, + + %% Whether or not to ignore an M-bit on an encapsulated AVP, or on + %% all AVPs with the service_opt() strict_mbit. + Opts1 = set_strict(Type, M, Opts0), + + %% Whether or not we're decoding within Failed-AVP and should + %% ignore decode errors. + #{dictionary := AppMod, failed_avp := Failed} + = Opts + = set_failed(Name, Opts1), %% Not AvpName or else a failed Failed-AVP + %% decode is packed into 'AVP'. + + %% Reset the dictionary for best-effort decode of Failed-AVP. + DecMod = if Failed -> + AppMod; + true -> + Mod + end, + + %% On decode, a Grouped AVP is represented as a #diameter_avp{} + %% list with AVP as head and component AVPs as tail. On encode, + %% data can be a list of component AVPs. + + try avp_decode(Data, AvpName, Opts, DecMod, Mod) of + {Rec, As} when Type == 'Grouped' -> + A = Avp#diameter_avp{name = AvpName, + value = Rec, + type = Type}, + {[A|As], pack_avp(Name, A, Opts, Mod, Acc)}; + + V when Type /= 'Grouped' -> + A = Avp#diameter_avp{name = AvpName, + value = V, + type = Type}, + {A, pack_avp(Name, A, Opts, Mod, Acc)} + catch + throw: {?MODULE, {grouped, Error, ComponentAvps}} -> + decode_error(Name, + Error, + ComponentAvps, + Opts, + Mod, + Avp#diameter_avp{name = AvpName, + data = trim(Avp#diameter_avp.data), + type = Type}, + Acc); + + error: Reason -> + decode_error(Name, + Reason, + Opts, + Mod, + Avp#diameter_avp{name = AvpName, + data = trim(Avp#diameter_avp.data), + type = Type}, + Acc) + end. + +%% avp_decode/5 + +avp_decode(Data, AvpName, Opts, Mod, Mod) -> + Mod:avp(decode, Data, AvpName, Opts); + +avp_decode(Data, AvpName, Opts, Mod, _) -> + Mod:avp(decode, Data, AvpName, Opts, Mod). + +%% trim/1 +%% +%% Remove any extra bit that was added in diameter_codec to induce a +%% 5014 error. + +trim(#diameter_avp{data = Data} = Avp) -> + Avp#diameter_avp{data = trim(Data)}; + +trim({5014, Bin}) -> + Bin; + +trim(Avps) + when is_list(Avps) -> + lists:map(fun trim/1, Avps); + +trim(Avp) -> + Avp. + +%% decode_error/7 + +decode_error(Name, [_ | Rec], _, #{failed_avp := true} = Opts, Mod, Avp, Acc) -> + decode_AVP(Name, Avp#diameter_avp{value = Rec}, Opts, Mod, Acc); + +decode_error(Name, _, _, #{failed_avp := true} = Opts, Mod, Avp, Acc) -> + decode_AVP(Name, Avp, Opts, Mod, Acc); + +decode_error(_, [Error | _], ComponentAvps, _, _, Avp, Acc) -> + decode_error(Error, Avp, Acc, ComponentAvps); + +decode_error(_, Error, ComponentAvps, _, _, Avp, Acc) -> + decode_error(Error, Avp, Acc, ComponentAvps). + +%% decode_error/5 + +decode_error(Name, _Reason, #{failed_avp := true} = Opts, Mod, Avp, Acc) -> + decode_AVP(Name, Avp, Opts, Mod, Acc); + +decode_error(Name, Reason, Opts, Mod, Avp, {Rec, Failed}) -> + Stack = diameter_lib:get_stacktrace(), + diameter_lib:log(decode_error, + ?MODULE, + ?LINE, + {Reason, Name, Avp#diameter_avp.name, Mod, Stack}), + {Avp, {Rec, [rc(Reason, Avp, Opts, Mod) | Failed]}}. + +%% decode_error/4 + +decode_error({RC, ErrorData}, Avp, {Rec, Failed}, ComponentAvps) -> + E = Avp#diameter_avp{data = [ErrorData]}, + {[Avp | trim(ComponentAvps)], {Rec, [{RC, E} | Failed]}}. + +%% set_strict/3 + +%% Set false as soon as we see a Grouped AVP that doesn't set the +%% M-bit, to ignore the M-bit on an encapsulated AVP. +set_strict('Grouped', false = M, #{strict_mbit := true} = Opts) -> + Opts#{strict_mbit := M}; +set_strict(_, _, Opts) -> + Opts. + +%% set_failed/2 +%% +%% Set true as soon as we see Failed-AVP. Matching on 'Failed-AVP' +%% assumes that this is the RFC AVP. Strictly, this doesn't need to be +%% the case. + +set_failed('Failed-AVP', #{failed_avp := false} = Opts) -> + Opts#{failed_avp := true}; +set_failed(_, Opts) -> + Opts. + +%% decode_AVP/5 +%% +%% Don't know this AVP: see if it can be packed in an 'AVP' field +%% undecoded. Note that the type field is 'undefined' in this case. + +decode_AVP(Name, Avp, Opts, Mod, Acc) -> + {trim(Avp), pack_AVP(Name, Avp, Opts, Mod, Acc)}. + +%% rc/2 + +%% diameter_types will raise an error of this form to communicate +%% DIAMETER_INVALID_AVP_LENGTH (5014). A module specified to a +%% @custom_types tag in a dictionary file can also raise an error of +%% this form. +rc({'DIAMETER', 5014 = RC, _}, #diameter_avp{name = AvpName} = Avp, Opts, Mod) -> + {RC, Avp#diameter_avp{data = Mod:empty_value(AvpName, Opts)}}; + +%% 3588: +%% +%% DIAMETER_INVALID_AVP_VALUE 5004 +%% The request contained an AVP with an invalid value in its data +%% portion. A Diameter message indicating this error MUST include +%% the offending AVPs within a Failed-AVP AVP. +rc(_, Avp, _, _) -> + {5004, Avp}. + +%% pack_avp/5 + +pack_avp(Name, #diameter_avp{name = AvpName} = Avp, Opts, Mod, Acc) -> + pack_avp(Name, Mod:avp_arity(Name, AvpName), Avp, Opts, Mod, Acc). + +%% pack_avp/6 + +pack_avp(Name, 0, Avp, Opts, Mod, Acc) -> + pack_AVP(Name, Avp, Opts, Mod, Acc); + +pack_avp(_, Arity, #diameter_avp{name = AvpName} = Avp, _Opts, Mod, Acc) -> + pack(Arity, AvpName, Avp, Mod, Acc). + +%% pack_AVP/5 + +%% Length failure was induced because of a header/payload length +%% mismatch. The AVP Length is reset to match the received data if +%% this AVP is encoded in an answer message, since the length is +%% computed. +%% +%% Data is a truncated header if command_code = undefined, otherwise +%% payload bytes. The former is padded to the length of a header if +%% the AVP reaches an outgoing encode in diameter_codec. +%% +%% RFC 6733 says that an AVP returned with 5014 can contain a minimal +%% payload for the AVP's type, but in this case we don't know the +%% type. + +pack_AVP(_, #diameter_avp{data = {5014 = RC, Data}} = Avp, _, _, Acc) -> + {Rec, Failed} = Acc, + {Rec, [{RC, Avp#diameter_avp{data = Data}} | Failed]}; + +pack_AVP(Name, Avp, Opts, Mod, Acc) -> + pack_arity(Name, pack_arity(Name, Opts, Mod, Avp), Avp, Mod, Acc). + +%% pack_arity/5 + +pack_arity(_, 0, #diameter_avp{is_mandatory = M} = Avp, _, Acc) -> + {Rec, Failed} = Acc, + {Rec, [{if M -> 5001; true -> 5008 end, Avp} | Failed]}; + +pack_arity(_, Arity, Avp, Mod, Acc) -> + pack(Arity, 'AVP', Avp, Mod, Acc). + +%% Give Failed-AVP special treatment since (1) it'll contain any +%% unrecognized mandatory AVP's and (2) the RFC 3588 grammar failed to +%% allow for Failed-AVP in an answer-message. + +pack_arity(Name, + #{strict_mbit := Strict, + failed_avp := Failed}, + Mod, + #diameter_avp{is_mandatory = M, + name = AvpName}) -> + + %% Not testing just Name /= 'Failed-AVP' means we're changing the + %% packing of AVPs nested within Failed-AVP, but the point of + %% ignoring errors within Failed-AVP is to decode as much as + %% possible, and failing because a mandatory AVP couldn't be + %% packed into a dedicated field defeats that point. + + if Failed == true; + Name == 'Failed-AVP'; + Name == 'answer-message', AvpName == 'Failed-AVP'; + not M; + not Strict -> + Mod:avp_arity(Name, 'AVP'); + true -> + 0 + end. + +%% 3588: +%% +%% DIAMETER_AVP_UNSUPPORTED 5001 +%% The peer received a message that contained an AVP that is not +%% recognized or supported and was marked with the Mandatory bit. A +%% Diameter message with this error MUST contain one or more Failed- +%% AVP AVP containing the AVPs that caused the failure. +%% +%% DIAMETER_AVP_NOT_ALLOWED 5008 +%% A message was received with an AVP that MUST NOT be present. The +%% Failed-AVP AVP MUST be included and contain a copy of the +%% offending AVP. + +%% pack/5 + +pack(Arity, FieldName, Avp, Mod, {Rec, _} = Acc) -> + pack(Mod:'#get-'(FieldName, Rec), Arity, FieldName, Avp, Mod, Acc). + +%% pack/6 + +pack(undefined, 1, 'AVP' = F, Avp, Mod, {Rec, Failed}) -> %% unlikely + {Mod:'#set-'({F, Avp}, Rec), Failed}; + +pack(undefined, 1, F, #diameter_avp{value = V}, Mod, {Rec, Failed}) -> + {Mod:'#set-'({F, V}, Rec), Failed}; + +%% 3588: +%% +%% DIAMETER_AVP_OCCURS_TOO_MANY_TIMES 5009 +%% A message was received that included an AVP that appeared more +%% often than permitted in the message definition. The Failed-AVP +%% AVP MUST be included and contain a copy of the first instance of +%% the offending AVP that exceeded the maximum number of occurrences +%% + +pack(_, 1, _, Avp, _, {Rec, Failed}) -> + {Rec, [{5009, Avp} | Failed]}; + +pack(L, {_, Max}, F, Avp, Mod, {Rec, Failed}) -> + case '*' /= Max andalso has_prefix(Max+1, L) of + true -> + {Rec, [{5009, Avp} | Failed]}; + false when F == 'AVP' -> + {Mod:'#set-'({F, [Avp | L]}, Rec), Failed}; + false -> + {Mod:'#set-'({F, [Avp#diameter_avp.value | L]}, Rec), Failed} + end. + +%% --------------------------------------------------------------------------- +%% # grouped_avp/3 +%% --------------------------------------------------------------------------- + +-spec grouped_avp(decode, avp_name(), binary() | {5014, binary()}, term()) + -> {avp_record(), [avp()]}; + (encode, avp_name(), avp_record() | avp_values(), term()) + -> iolist() + | no_return(). + +%% Length error induced by diameter_codec:collect_avps/1: the AVP +%% length in the header was too short (insufficient for the extracted +%% header) or too long (past the end of the message). An empty payload +%% is sufficient according to the RFC text for 5014. +grouped_avp(decode, _Name, {5014 = RC, _Bin}, _) -> + ?THROW({grouped, {RC, []}, []}); + +grouped_avp(decode, Name, Data, Opts) -> + grouped_decode(Name, diameter_codec:collect_avps(Data), Opts); + +grouped_avp(encode, Name, Data, Opts) -> + encode_avps(Name, Data, Opts). + +%% grouped_decode/2 +%% +%% Note that Grouped is the only AVP type that doesn't just return a +%% decoded value, also returning the list of component diameter_avp +%% records. + +%% Length error in trailing component AVP. +grouped_decode(_Name, {Error, Acc}, _) -> + {5014, Avp} = Error, + ?THROW({grouped, Error, [Avp | Acc]}); + +%% 7.5. Failed-AVP AVP + +%% In the case where the offending AVP is embedded within a Grouped AVP, +%% the Failed-AVP MAY contain the grouped AVP, which in turn contains +%% the single offending AVP. The same method MAY be employed if the +%% grouped AVP itself is embedded in yet another grouped AVP and so on. +%% In this case, the Failed-AVP MAY contain the grouped AVP hierarchy up +%% to the single offending AVP. This enables the recipient to detect +%% the location of the offending AVP when embedded in a group. + +%% An error in decoding a component AVP throws the first faulty +%% component, which the catch in d/3 wraps in the Grouped AVP in +%% question. A partially decoded record is only used when ignoring +%% errors in Failed-AVP. +grouped_decode(Name, ComponentAvps, Opts) -> + {Rec, Avps, Es} = decode_avps(Name, ComponentAvps, Opts), + [] == Es orelse ?THROW({grouped, [{_,_} = hd(Es) | Rec], Avps}), + {Rec, Avps}. + +%% --------------------------------------------------------------------------- +%% # empty_group/2 +%% --------------------------------------------------------------------------- + +empty_group(Name, #{module := Mod} = Opts) -> + list_to_binary([z(F, A, Opts, Mod) || {F,A} <- Mod:avp_arity(Name)]). + +z(Name, 1, Opts, Mod) -> + z(Name, Opts, Mod); +z(_, {0,_}, _, _) -> + []; +z(Name, {Min, _}, Opts, Mod) -> + binary:copy(z(Name, Opts, Mod), Min). + +z('AVP', _, _) -> + <<0:64>>; %% minimal header +z(Name, Opts, Mod) -> + Bin = diameter_codec:pack_data(Mod:avp_header(Name), + Mod:empty_value(Name, Opts)), + Sz = iolist_size(Bin), + <<0:Sz/unit:8>>. + +%% --------------------------------------------------------------------------- +%% # empty/2 +%% --------------------------------------------------------------------------- + +empty(Name, #{module := Mod} = Opts) -> + Mod:avp(encode, zero, Name, Opts). + +%% ------------------------------------------------------------------------------ + +newrec(Mod, Name) -> + Mod:'#new-'(Mod:name2rec(Name)). diff --git a/lib/diameter/src/base/diameter_lib.erl b/lib/diameter/src/base/diameter_lib.erl index b835e87967..8792e97621 100644 --- a/lib/diameter/src/base/diameter_lib.erl +++ b/lib/diameter/src/base/diameter_lib.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -37,7 +37,6 @@ ipaddr/1, spawn_opts/2, wait/1, - fold_tuple/3, fold_n/3, for_n/2, log/4]). @@ -299,8 +298,28 @@ spawn_opts(server, Opts) -> spawn_opts(worker, Opts) -> opts(5000, Opts). -opts(HeapSize, Opts) -> - [{min_heap_size, HeapSize} | lists:keydelete(min_heap_size, 1, Opts)]. +%% These setting are historical rather than useful. In particular, the +%% server setting can bloat many processes unnecessarily. Let them be +%% disabled with -diameter min_heap_size false. + +opts(Def, Opts) -> + Key = min_heap_size, + case getenv(Key, Def) of + N when is_integer(N), 0 =< N -> + [{Key, N} | lists:keydelete(Key, 1, Opts)]; + _ -> + Opts + end. + +%% getenv/1 + +getenv(Key, Def) -> + case application:get_env(Key) of + {ok, T} -> + T; + undefined -> + Def + end. %% --------------------------------------------------------------------------- %% # wait/1 @@ -321,36 +340,6 @@ down(MRef) receive {'DOWN', MRef, process, _, _} = T -> T end. %% --------------------------------------------------------------------------- -%% # fold_tuple/3 -%% --------------------------------------------------------------------------- - --spec fold_tuple(N, T0, T) - -> tuple() - when N :: pos_integer(), - T0 :: tuple(), - T :: tuple() - | undefined. - -%% Replace fields in T0 by those of T starting at index N, unless the -%% new value is 'undefined'. -%% -%% eg. fold_tuple(2, Hdr, #diameter_header{end_to_end_id = 42}) - -fold_tuple(_, T, undefined) -> - T; - -fold_tuple(N, T0, T1) -> - {_, T} = lists:foldl(fun(V, {I,_} = IT) -> {I+1, ft(V, IT)} end, - {N, T0}, - lists:nthtail(N-1, tuple_to_list(T1))), - T. - -ft(undefined, {_, T}) -> - T; -ft(Value, {Idx, T}) -> - setelement(Idx, T, Value). - -%% --------------------------------------------------------------------------- %% # fold_n/3 %% --------------------------------------------------------------------------- diff --git a/lib/diameter/src/base/diameter_peer_fsm.erl b/lib/diameter/src/base/diameter_peer_fsm.erl index 996e75a8d3..1b0dc417e5 100644 --- a/lib/diameter/src/base/diameter_peer_fsm.erl +++ b/lib/diameter/src/base/diameter_peer_fsm.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -128,6 +128,12 @@ %% outgoing DPR; boolean says whether or not %% the request was sent explicitly with %% diameter:call/4. + codec :: #{string_decode := boolean(), + strict_mbit := boolean(), + rfc := 3588 | 6733, + ordered_encode := false}, + strict :: boolean(), + ack = false :: boolean(), length_errors :: exit | handle | discard, incoming_maxlen :: integer() | infinity}). @@ -158,10 +164,7 @@ %% # start/3 %% --------------------------------------------------------------------------- --spec start(T, [Opt], {[diameter:service_opt()], - [node()], - module(), - #diameter_service{}}) +-spec start(T, [Opt], {map(), [node()], module(), #diameter_service{}}) -> {reference(), pid()} when T :: {connect|accept, diameter:transport_ref()}, Opt :: diameter:transport_opt(). @@ -220,9 +223,10 @@ i({Ack, WPid, {M, Ref} = T, Opts, {SvcOpts, Nodes, Dict0, Svc}}) -> erlang:monitor(process, WPid), wait(Ack, WPid), diameter_stats:reg(Ref), - diameter_codec:setopts([{common_dictionary, Dict0} | SvcOpts]), - {_,_} = Mask = proplists:get_value(sequence, SvcOpts), - Maxlen = proplists:get_value(incoming_maxlen, SvcOpts, 16#FFFFFF), + + #{sequence := Mask, incoming_maxlen := Maxlen} + = SvcOpts, + {[Cs,Ds], Rest} = proplists:split(Opts, [capabilities_cb, disconnect_cb]), putr(?CB_KEY, {Ref, [F || {_,F} <- Cs]}), putr(?DPR_KEY, [F || {_, F} <- Ds]), @@ -233,7 +237,8 @@ i({Ack, WPid, {M, Ref} = T, Opts, {SvcOpts, Nodes, Dict0, Svc}}) -> proplists:get_value(dpa_timeout, Opts, ?DPA_TIMEOUT)}), Tmo = proplists:get_value(capx_timeout, Opts, ?CAPX_TIMEOUT), - OnLengthErr = proplists:get_value(length_errors, Opts, exit), + Strictness = proplists:get_value(capx_strictness, Opts, true), + LengthErr = proplists:get_value(length_errors, Opts, exit), {TPid, Addrs} = start_transport(T, Rest, Svc), @@ -245,8 +250,14 @@ i({Ack, WPid, {M, Ref} = T, Opts, {SvcOpts, Nodes, Dict0, Svc}}) -> dictionary = Dict0, mode = M, service = svc(Svc, Addrs), - length_errors = OnLengthErr, - incoming_maxlen = Maxlen}. + length_errors = LengthErr, + strict = Strictness, + incoming_maxlen = Maxlen, + codec = maps:with([string_decode, + strict_mbit, + rfc, + ordered_encode], + SvcOpts#{ordered_encode => false})}. %% The transport returns its local ip addresses so that different %% transports on the same service can use different local addresses. %% The local addresses are put into Host-IP-Address avps here when @@ -356,7 +367,7 @@ handle_info(T, #state{} = State) -> %% Note that there's no guarantee that the service and transport %% capabilities are good enough to build a CER/CEA that can be -%% succesfully encoded. It's not checked at diameter:add_transport/2 +%% successfully encoded. It's not checked at diameter:add_transport/2 %% since this can be called before creating the service. %% terminate/2 @@ -439,9 +450,18 @@ transition({connection_timeout = T, TPid}, transition({connection_timeout, _}, _) -> ok; +%% Requests for acknowledgements to the transport. +transition({diameter, ack}, S) -> + S#state{ack = true}; + %% Incoming message from the transport. -transition({diameter, {recv, MsgT}}, S) -> - incoming(MsgT, S); +transition({diameter, {recv, Msg}}, S) -> + incoming(recv(Msg, S), S); + +%% Handler of an incoming request is telling of its existence. +transition({handler, Pid}, _) -> + put_route(Pid), + ok; %% Timeout when still in the same state ... transition({timeout = T, PS}, #state{state = PS}) -> @@ -454,6 +474,9 @@ transition({timeout, _}, _) -> %% Outgoing message. transition({send, Msg}, S) -> outgoing(Msg, S); +transition({send, Msg, Route}, S) -> + route_outgoing(Route), + outgoing(Msg, S); %% Request for graceful shutdown at remove_transport, stop_service of %% application shutdown. @@ -481,10 +504,13 @@ transition({'DOWN', _, process, WPid, _}, transition({'DOWN', _, process, TPid, _}, #state{transport = TPid} = S) -> - start_next(S); + start_next(S#state{ack = false}); -%% Transport has died after connection timeout. -transition({'DOWN', _, process, _, _}, _) -> +%% Transport has died after connection timeout, or handler process has +%% died. +transition({'DOWN', _, process, Pid, _}, #state{transport = TPid}) -> + is_reference(erase_route(Pid)) + andalso send(TPid, false), %% answer not forthcoming ok; %% State query. @@ -494,6 +520,59 @@ transition({state, Pid}, #state{state = S, transport = TPid}) -> %% Crash on anything unexpected. +%% route_outgoing/1 + +%% Map identifiers in an outgoing request to be able to lookup the +%% handler process when the answer is received. +route_outgoing({Pid, Ref, Seqs}) -> %% request + MRef = monitor(process, Pid), + put(Pid, Seqs), + put(Seqs, {Pid, Ref, MRef}); + +%% Remove a mapping made for an incoming request. +route_outgoing(Pid) + when is_pid(Pid) -> %% answer + MRef = erase_route(Pid), + undefined == MRef orelse demonitor(MRef). + +%% put_route/1 + +%% Monitor on a handler process for an incoming request. +put_route(Pid) -> + MRef = monitor(process, Pid), + put(Pid, MRef). + +%% get_route/2 + +%% incoming answer +get_route(_, #diameter_packet{header = #diameter_header{is_request = false}} + = Pkt) -> + Seqs = diameter_codec:sequence_numbers(Pkt), + case erase(Seqs) of + {Pid, Ref, MRef} -> + demonitor(MRef), + erase(Pid), + {Pid, Ref, self()}; + undefined -> %% request unknown + false + end; + +%% incoming request +get_route(Ack, _) -> + Ack. + +%% erase_route/1 + +erase_route(Pid) -> + case erase(Pid) of + {_,_} = Seqs -> + erase(Seqs); + T -> + T + end. + +%% capx/1 + capx(recv_CER) -> 'CER'; capx({'Wait-CEA', _, _}) -> @@ -518,7 +597,8 @@ send_CER(#state{state = {'Wait-Conn-Ack', Tmo}, mode = {connect, Remote}, service = #diameter_service{capabilities = LCaps}, transport = TPid, - dictionary = Dict} + dictionary = Dict, + codec = Opts} = S) -> OH = LCaps#diameter_caps.origin_host, req_send_CER(OH, Remote) @@ -528,7 +608,7 @@ send_CER(#state{state = {'Wait-Conn-Ack', Tmo}, #diameter_packet{header = #diameter_header{end_to_end_id = Eid, hop_by_hop_id = Hid}} = Pkt - = encode(CER, Dict), + = encode(CER, Opts, Dict), incr(send, Pkt, Dict), send(TPid, Pkt), ?LOG(send, 'CER'), @@ -557,37 +637,36 @@ build_CER(#state{service = #diameter_service{capabilities = LCaps}, {ok, CER} = diameter_capx:build_CER(LCaps, Dict), CER. -%% encode/2 +%% encode/3 -encode(Rec, Dict) -> +encode(Rec, Opts, Dict) -> Seq = diameter_session:sequence({_,_} = getr(?SEQUENCE_KEY)), Hdr = #diameter_header{version = ?DIAMETER_VERSION, end_to_end_id = Seq, hop_by_hop_id = Seq}, - diameter_codec:encode(Dict, #diameter_packet{header = Hdr, - msg = Rec}). + diameter_codec:encode(Dict, Opts, #diameter_packet{header = Hdr, + msg = Rec}). %% incoming/2 -incoming({Msg, NPid}, S) -> - try recv(Msg, S) of - T -> - NPid ! {diameter, discard}, - T - catch - {?MODULE, Name, Pkt} -> - S#state.parent ! {recv, self(), Name, {Pkt, NPid}}, - rcv(Name, Pkt, S) - end; +incoming({recv = T, Name, Pkt}, #state{parent = Pid, ack = Ack} = S) -> + Pid ! {T, self(), get_route(Ack, Pkt), Name, Pkt}, + rcv(Name, Pkt, S); -incoming(Msg, S) -> - try - recv(Msg, S) - catch - {?MODULE, Name, Pkt} -> - S#state.parent ! {recv, self(), Name, Pkt}, - rcv(Name, Pkt, S) - end. +incoming(#diameter_header{is_request = R}, #state{transport = TPid, + ack = Ack}) -> + R andalso Ack andalso send(TPid, false), + ok; + +incoming(<<_:32, 1:1, _/bits>>, #state{ack = true} = S) -> + send(S#state.transport, false), + ok; + +incoming(<<_/bits>>, _) -> + ok; + +incoming(T, _) -> + T. %% recv/2 @@ -612,7 +691,19 @@ recv1(_, #diameter_packet{header = H, bin = Bin}, #state{incoming_maxlen = M}) when M < size(Bin) -> - invalid(false, incoming_maxlen_exceeded, {size(Bin), H}); + invalid(false, incoming_maxlen_exceeded, {size(Bin), H}), + H; + +%% Ignore anything but an expected CER/CEA if so configured. This is +%% non-standard behaviour. +recv1(Name, #diameter_packet{header = H}, #state{state = {'Wait-CEA', _, _}, + strict = false}) + when Name /= 'CEA' -> + H; +recv1(Name, #diameter_packet{header = H}, #state{state = recv_CER, + strict = false}) + when Name /= 'CER' -> + H; %% Incoming request after outgoing DPR: discard. Don't discard DPR, so %% both ends don't do so when sending simultaneously. @@ -620,13 +711,15 @@ recv1(Name, #diameter_packet{header = #diameter_header{is_request = true} = H}, #state{dpr = {_,_,_}}) when Name /= 'DPR' -> - invalid(false, recv_after_outgoing_dpr, H); + invalid(false, recv_after_outgoing_dpr, H), + H; %% Incoming request after incoming DPR: discard. recv1(_, #diameter_packet{header = #diameter_header{is_request = true} = H}, #state{dpr = true}) -> - invalid(false, recv_after_incoming_dpr, H); + invalid(false, recv_after_incoming_dpr, H), + H; %% DPA with identifier mismatch, or in response to a DPR initiated by %% the service. @@ -644,7 +737,7 @@ recv1('DPA' = N, %% Any other message with a header and no length errors: send to the %% parent. recv1(Name, Pkt, #state{}) -> - throw({?MODULE, Name, Pkt}). + {recv, Name, Pkt}. %% recv/3 @@ -663,10 +756,12 @@ recv(#diameter_header{} #diameter_packet{bin = Bin}, #state{length_errors = E}) -> T = {size(Bin), bit_size(Bin) rem 8, H}, - invalid(E, message_length_mismatch, T); + invalid(E, message_length_mismatch, T), + Bin; recv(false, #diameter_packet{bin = Bin}, #state{length_errors = E}) -> - invalid(E, truncated_header, Bin). + invalid(E, truncated_header, Bin), + Bin. %% Note that counters here only count discarded messages. invalid(E, Reason, T) -> @@ -710,26 +805,23 @@ rcv('DPA' = N, = Pkt, #state{dictionary = Dict0, transport = TPid, - dpr = {X, Hid, Eid}}) -> + dpr = {X, Hid, Eid}, + codec = Opts}) -> ?LOG(recv, N), X orelse begin %% Only count DPA in response to a DPR sent by the %% service: explicit DPR is counted in the same way %% as other explicitly sent requests. incr(recv, H, Dict0), - incr_rc(recv, diameter_codec:decode(Dict0, Pkt), Dict0) + incr_rc(recv, diameter_codec:decode(Dict0, Opts, Pkt), Dict0) end, diameter_peer:close(TPid), {stop, N}; -%% Ignore anything else, an unsolicited DPA in particular. Note that -%% dpa_timeout deals with the case in which the peer sends the wrong -%% identifiers in DPA. -rcv(N, #diameter_packet{header = H}, _) - when N == 'CER'; - N == 'CEA'; - N == 'DPR'; - N == 'DPA' -> +%% Ignore an unsolicited DPA in particular. Note that dpa_timeout +%% deals with the case in which the peer sends the wrong identifiers +%% in DPA. +rcv('DPA' = N, #diameter_packet{header = H}, _) -> ?LOG(ignored, N), %% Note that these aren't counted in the normal recv counter. diameter_stats:incr({diameter_codec:msg_id(H), recv, ignored}), @@ -782,7 +874,7 @@ outgoing(#diameter_packet{header = #diameter_header{application_id = 0, invalid(false, dpr_after_dpr, H) %% DPR sent: discard end; -%% Explict CER or DWR: discard. These are sent by us. +%% Explicit CER or DWR: discard. These are sent by us. outgoing(#diameter_packet{header = #diameter_header{application_id = 0, cmd_code = C, is_request = true} @@ -818,15 +910,21 @@ header(Bin) -> %% DWR %% Incoming CER or DPR. handle_request(Name, - #diameter_packet{header = H} = Pkt, - #state{dictionary = Dict0} = S) -> + #diameter_packet{header = H} + = Pkt, + #state{dictionary = Dict0, + codec = Opts} + = S) -> ?LOG(recv, Name), incr(recv, H, Dict0), - send_answer(Name, diameter_codec:decode(Dict0, Pkt), S). + send_answer(Name, diameter_codec:decode(Dict0, Opts, Pkt), S). %% send_answer/3 -send_answer(Type, ReqPkt, #state{transport = TPid, dictionary = Dict} = S) -> +send_answer(Type, ReqPkt, #state{transport = TPid, + dictionary = Dict, + codec = Opts} + = S) -> incr_error(recv, ReqPkt, Dict), #diameter_packet{header = H, @@ -845,7 +943,7 @@ send_answer(Type, ReqPkt, #state{transport = TPid, dictionary = Dict} = S) -> msg = Msg, transport_data = TD}, - AnsPkt = diameter_codec:encode(Dict, Pkt), + AnsPkt = diameter_codec:encode(Dict, Opts, Pkt), incr(send, AnsPkt, Dict), incr_rc(send, AnsPkt, Dict), @@ -872,8 +970,6 @@ build_answer('CER', = Pkt, #state{dictionary = Dict0} = S) -> - diameter_codec:setopts([{string_decode, false}]), - {SupportedApps, RCaps, CEA} = recv_CER(CER, S), [RC, IS] = Dict0:'#get-'(['Result-Code', 'Inband-Security-Id'], CEA), @@ -1074,18 +1170,16 @@ recv_CER(CER, #state{service = Svc, dictionary = Dict}) -> handle_CEA(#diameter_packet{header = H} = Pkt, #state{dictionary = Dict0, - service = #diameter_service{capabilities = LCaps}} + service = #diameter_service{capabilities = LCaps}, + codec = Opts} = S) -> incr(recv, H, Dict0), #diameter_packet{} = DPkt - = diameter_codec:decode(Dict0, Pkt), - - diameter_codec:setopts([{string_decode, false}]), + = diameter_codec:decode(Dict0, Opts, Pkt), RC = result_code(incr_rc(recv, DPkt, Dict0)), - {SApps, IS, RCaps} = recv_CEA(DPkt, S), #diameter_caps{origin_host = {OH, DH}} @@ -1273,8 +1367,9 @@ dpr([], [Reason | _], S) -> -record(opts, {cause, timeout}). -send_dpr(Reason, Opts, #state{dictionary = Dict, - service = #diameter_service{capabilities = Caps}} +send_dpr(Reason, DprOpts, #state{dictionary = Dict, + service = #diameter_service{capabilities = Caps}, + codec = Opts} = S) -> #opts{cause = Cause, timeout = Tmo} = lists:foldl(fun opt/2, @@ -1283,7 +1378,7 @@ send_dpr(Reason, Opts, #state{dictionary = Dict, _ -> ?REBOOT end, timeout = dpa_timeout()}, - Opts), + DprOpts), #diameter_caps{origin_host = {OH, _}, origin_realm = {OR, _}} = Caps, @@ -1291,6 +1386,7 @@ send_dpr(Reason, Opts, #state{dictionary = Dict, Pkt = encode(['DPR', {'Origin-Host', OH}, {'Origin-Realm', OR}, {'Disconnect-Cause', Cause}], + Opts, Dict), send_dpr(false, Pkt, Tmo, S). diff --git a/lib/diameter/src/base/diameter_reg.erl b/lib/diameter/src/base/diameter_reg.erl index 9027130063..97e74657bd 100644 --- a/lib/diameter/src/base/diameter_reg.erl +++ b/lib/diameter/src/base/diameter_reg.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -137,7 +137,7 @@ match(Pat) -> match(Pat, Pid) -> ets:match_object(?TABLE, {Pat, Pid}). - + %% =========================================================================== %% # wait(Pat) %% diff --git a/lib/diameter/src/base/diameter_service.erl b/lib/diameter/src/base/diameter_service.erl index ccf68f4d93..a976a8b998 100644 --- a/lib/diameter/src/base/diameter_service.erl +++ b/lib/diameter/src/base/diameter_service.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -88,12 +88,6 @@ %% outside of the service process. -define(STATE_TABLE, ?MODULE). -%% The default sequence mask. --define(NOMASK, {0,32}). - -%% The default restrict_connections. --define(RESTRICT, nodes). - %% Workaround for dialyzer's lack of understanding of match specs. -type match(T) :: T | '_' | '$1' | '$2'. @@ -110,21 +104,17 @@ service :: #diameter_service{}, watchdogT = ets_new(watchdogs) %% #watchdog{} at start :: ets:tid(), - peerT, %% undefined in new code, but remain for upgrade - shared_peers, %% reasons. Replaced by local/remote. - local_peers, %% local :: {ets:tid(), ets:tid(), ets:tid()}, remote :: {ets:tid(), ets:tid(), ets:tid()}, monitor = false :: false | pid(), %% process to die with - options - :: [{sequence, diameter:sequence()} %% sequence mask - | {share_peers, diameter:remotes()} %% broadcast to - | {use_shared_peers, diameter:remotes()} %% use from - | {restrict_connections, diameter:restriction()} - | {strict_mbit, boolean()} - | {string_decode, boolean()} - | {incoming_maxlen, diameter:message_length()}]}). -%% shared_peers reflects the peers broadcast from remote nodes. + options :: #{sequence := diameter:sequence(), %% sequence mask + share_peers := diameter:remotes(),%% broadcast to + use_shared_peers := diameter:remotes(),%% use from + restrict_connections := diameter:restriction(), + incoming_maxlen := diameter:message_length(), + strict_mbit := boolean(), + string_decode := boolean(), + spawn_opt := list() | {module(), atom(), list()}}}). %% Record representing an RFC 3539 watchdog process implemented by %% diameter_watchdog. @@ -284,7 +274,7 @@ whois(SvcName) -> %% --------------------------------------------------------------------------- -spec pick_peer(SvcName, AppOrAlias, Opts) - -> {{TPid, Caps, App}, Mask, SvcOpts} + -> {{{TPid, Caps}, App}, SvcOpts} | false %% no selection | {error, no_service} when SvcName :: diameter:service_name(), @@ -292,14 +282,12 @@ whois(SvcName) -> | {alias, diameter:app_alias()}, Opts :: {fun((Dict :: module()) -> [term()]), diameter:peer_filter(), - Xtra :: list()}, + Xtra :: list(), + [diameter:peer_ref()]}, TPid :: pid(), Caps :: #diameter_caps{}, App :: #diameter_app{}, - Mask :: diameter:sequence(), - SvcOpts :: [diameter:service_opt()]. -%% Extract Mask in the returned tuple so that diameter_traffic doesn't -%% need to know about the ordering of SvcOpts used here. + SvcOpts :: map(). pick_peer(SvcName, App, Opts) -> pick(lookup_state(SvcName), App, Opts). @@ -319,16 +307,16 @@ pick(#state{service = #diameter_service{applications = Apps}} pick(_, false = No, _) -> No; -pick(#state{options = [{_, Mask} | SvcOpts]} +pick(#state{options = SvcOpts} = S, #diameter_app{module = ModX, dictionary = Dict} = App0, - {DestF, Filter, Xtra}) -> + {DestF, Filter, Xtra, TPids}) -> App = App0#diameter_app{module = ModX ++ Xtra}, [_,_] = RealmAndHost = diameter_lib:eval([DestF, Dict]), - case pick_peer(App, RealmAndHost, Filter, S) of - {TPid, Caps} -> - {{TPid, Caps, App}, Mask, SvcOpts}; + case pick_peer(App, RealmAndHost, [Filter | TPids], S) of + {_TPid, _Caps} = TC -> + {{TC, App}, SvcOpts}; false = No -> No end. @@ -556,81 +544,9 @@ terminate(Reason, #state{service_name = Name, local = {PeerT, _, _}} = S) -> %% # code_change/3 %% --------------------------------------------------------------------------- -code_change(_FromVsn, #state{} = S, _Extra) -> - {ok, S}; - -%% Don't support downgrade since we won't in appup. -code_change({down = T, _}, _, _Extra) -> - {error, T}; - -%% Upgrade local/shared peers dicts populated in old code. Don't -code_change(_FromVsn, S0, _Extra) -> - {state, Id, SvcName, Svc, WT, PeerT, SDict, LDict, Monitor, Opts} - = S0, - - init_peers(LT = setelement(1, {PT, _, _} = init_peers(), PeerT), - fun({_,A}) -> A end), - init_peers(init_peers(RT = init_peers(), SDict), - fun(A) -> A end), - - S = #state{id = Id, - service_name = SvcName, - service = Svc, - watchdogT = WT, - peerT = PT, %% empty - shared_peers = SDict, - local_peers = LDict, - local = LT, - remote = RT, - monitor = Monitor, - options = Opts}, - - %% Replacing the table entry and deleting the old shared tables - %% can make outgoing requests return {error, no_connection} until - %% everyone is running new code. Don't delete the tables to avoid - %% crashing request processes. - ets:delete_all_objects(SDict), - ets:delete_all_objects(LDict), - ets:insert(?STATE_TABLE, S), +code_change(_FromVsn, S, _Extra) -> {ok, S}. -%% init_peers/2 - -%% Populate app and identity bags from a new-style #peer{} sets. -init_peers({PeerT, _, _} = T, F) - when is_function(F) -> - ets:foldl(fun(#peer{pid = P, apps = As, caps = C}, N) -> - insert_peer(P, lists:map(F, As), C, T), - N+1 - end, - 0, - PeerT); - -%% Populate #peer{} table given a shared peers dict. -init_peers({PeerT, _, _}, SDict) -> - dict:fold(fun(P, As, N) -> - ets:update_element(PeerT, P, {#peer.apps, As}), - N+1 - end, - 0, - diameter_dict:fold(fun(A, Ps, D) -> - init_peers(A, Ps, PeerT, D) - end, - dict:new(), - SDict)). - -%% init_peers/4 - -init_peers(App, TCs, PeerT, Dict) -> - lists:foldl(fun({P,C}, D) -> - ets:insert(PeerT, #peer{pid = P, - apps = [], - caps = C}), - dict:append(P, App, D) - end, - Dict, - TCs). - %% =========================================================================== %% =========================================================================== @@ -768,7 +684,7 @@ cfg_acc({SvcName, #diameter_service{applications = Apps} = Rec, Opts}, local = init_peers(), remote = init_peers(), monitor = mref(get_value(monitor, Opts)), - options = service_options(Opts)}, + options = service_options(lists:keydelete(monitor, 1, Opts))}, {S, Acc}; cfg_acc({_Ref, Type, _Opts} = T, {S, Acc}) @@ -784,24 +700,14 @@ init_peers() -> %% TPid} service_options(Opts) -> - [{sequence, proplists:get_value(sequence, Opts, ?NOMASK)}, - {share_peers, get_value(share_peers, Opts)}, - {use_shared_peers, get_value(use_shared_peers, Opts)}, - {restrict_connections, proplists:get_value(restrict_connections, - Opts, - ?RESTRICT)}, - {spawn_opt, proplists:get_value(spawn_opt, Opts, [])}, - {string_decode, proplists:get_value(string_decode, Opts, true)}, - {incoming_maxlen, proplists:get_value(incoming_maxlen, Opts, 16#FFFFFF)}, - {strict_mbit, proplists:get_value(strict_mbit, Opts, true)}]. -%% The order of options is significant since we match against the list. + maps:from_list(Opts). mref(false = No) -> No; mref(P) -> monitor(process, P). -init_shared(#state{options = [_, _, {_,T} | _], +init_shared(#state{options = #{use_shared_peers := T}, service_name = Svc}) -> notify(T, Svc, {service, self()}). @@ -899,7 +805,8 @@ start(Ref, Type, Opts, State) -> start(Ref, Type, Opts, N, #state{watchdogT = WatchdogT, local = {PeerT, _, _}, - options = SvcOpts, + options = #{string_decode := SD} + = SvcOpts0, service_name = SvcName, service = Svc0}) when Type == connect; @@ -907,21 +814,25 @@ start(Ref, Type, Opts, N, #state{watchdogT = WatchdogT, #diameter_service{applications = Apps} = Svc1 = merge_service(Opts, Svc0), - Svc = binary_caps(Svc1, proplists:get_value(string_decode, SvcOpts, true)), - RecvData = diameter_traffic:make_recvdata([SvcName, - PeerT, - Apps, - SvcOpts]), - T = {{spawn_opts([Opts, SvcOpts]), RecvData}, Opts, SvcOpts, Svc}, + Svc = binary_caps(Svc1, SD), + SvcOpts = merge_options(Opts, SvcOpts0), + RecvData = diameter_traffic:make_recvdata([SvcName, PeerT, Apps, SvcOpts]), + T = {Opts, SvcOpts, RecvData, Svc}, Rec = #watchdog{type = Type, ref = Ref, options = Opts}, + diameter_lib:fold_n(fun(_,A) -> [wd(Type, Ref, T, WatchdogT, Rec) | A] end, [], N). +merge_options(Opts, SvcOpts) -> + Keys = maps:keys(SvcOpts), + Map = maps:from_list([KV || {K,_} = KV <- Opts, lists:member(K, Keys)]), + maps:merge(SvcOpts, Map). + binary_caps(Svc, true) -> Svc; binary_caps(#diameter_service{capabilities = Caps} = Svc, false) -> @@ -936,12 +847,6 @@ wd(Type, Ref, T, WatchdogT, Rec) -> %% record so that each watchdog may get a different record. This %% record is what is passed back into application callbacks. -spawn_opts(Optss) -> - SpawnOpts = get_value(spawn_opt, Optss, []), - [T || T <- SpawnOpts, - T /= link, - T /= monitor]. - start_watchdog(Type, Ref, T) -> {_MRef, Pid} = diameter_watchdog:start({Type, Ref}, T), Pid. @@ -1154,18 +1059,6 @@ keyfind([Key | Rest], Pos, L) -> T end. -%% get_value/3 - -get_value(_, [], Def) -> - Def; -get_value(Key, [L | Rest], Def) -> - case lists:keyfind(Key, 1, L) of - {_,V} -> - V; - _ -> - get_value(Key, Rest, Def) - end. - %% find_outgoing_app/2 find_outgoing_app(Alias, Apps) -> @@ -1463,19 +1356,19 @@ send_event(#diameter_event{service = SvcName} = E) -> %% # share_peer/5 %% --------------------------------------------------------------------------- -share_peer(up, Caps, Apps, TPid, #state{options = [_, {_,T} | _], +share_peer(up, Caps, Apps, TPid, #state{options = #{share_peers := SP}, service_name = Svc}) -> - notify(T, Svc, {peer, TPid, [A || {_,A} <- Apps], Caps}); + notify(SP, Svc, {peer, TPid, [A || {_,A} <- Apps], Caps}); -share_peer(down, _Caps, _Apps, TPid, #state{options = [_, {_,T} | _], +share_peer(down, _Caps, _Apps, TPid, #state{options = #{share_peers := SP}, service_name = Svc}) -> - notify(T, Svc, {peer, TPid}). + notify(SP, Svc, {peer, TPid}). %% --------------------------------------------------------------------------- %% # share_peers/2 %% --------------------------------------------------------------------------- -share_peers(Pid, #state{options = [_, {_,SP} | _], +share_peers(Pid, #state{options = #{share_peers := SP}, local = {PeerT, AppT, _}}) -> is_remote(Pid, SP) andalso ets:foldl(fun(T, N) -> N + sp(Pid, AppT, T) end, @@ -1507,7 +1400,8 @@ is_remote(Pid, T) -> %% # remote_peer_up/4 %% --------------------------------------------------------------------------- -remote_peer_up(TPid, Aliases, Caps, #state{options = [_, _, {_,T} | _]} = S) -> +remote_peer_up(TPid, Aliases, Caps, #state{options = #{use_shared_peers := T}} + = S) -> is_remote(TPid, T) andalso rpu(TPid, Aliases, Caps, S). rpu(TPid, Aliases, Caps, #state{service = Svc, remote = RT}) -> @@ -1629,8 +1523,14 @@ pick_peer(Local, %% peers/4 -peers(Alias, RH, Filter, T) -> - filter(Alias, RH, Filter, T, true). +%% No peer options pointing at specific peers: search for them. +peers(Alias, RH, [Filter], T) -> + filter(Alias, RH, Filter, T, true); + +%% Or just lookup. +peers(_Alias, RH, [Filter | TPids], {PeerT, _AppT, _IdentT}) -> + {Ts, _} = filter(caps(PeerT, TPids), RH, Filter), + Ts. %% filter/5 %% @@ -1858,13 +1758,6 @@ eq(Any, Id, PeerId) -> %% OctetString() can be specified as an iolist() so test for string %% rather then term equality. -%% transports/1 - -transports(#state{watchdogT = WatchdogT}) -> - ets:select(WatchdogT, [{#watchdog{peer = '$1', _ = '_'}, - [{'is_pid', '$1'}], - ['$1']}]). - %% --------------------------------------------------------------------------- %% # service_info/2 %% --------------------------------------------------------------------------- @@ -1887,7 +1780,6 @@ transports(#state{watchdogT = WatchdogT}) -> -define(ALL_INFO, [capabilities, applications, transport, - pending, options]). %% The rest. @@ -1981,7 +1873,6 @@ complete_info(Item, #state{service = Svc} = S) -> applications -> info_apps(S); transport -> info_transport(S); options -> info_options(S); - pending -> info_pending(S); keys -> ?ALL_INFO ++ ?CAP_INFO ++ ?OTHER_INFO; all -> service_info(?ALL_INFO, S); statistics -> info_stats(S); @@ -2189,13 +2080,6 @@ info_apps(#state{service = #diameter_service{applications = Apps}}) -> mk_app(#diameter_app{} = A) -> lists:zip(record_info(fields, diameter_app), tl(tuple_to_list(A))). -%% info_pending/1 -%% -%% One entry for each outgoing request whose answer is outstanding. - -info_pending(#state{} = S) -> - diameter_traffic:pending(transports(S)). - %% info_info/1 %% %% Extract process_info from connections info. diff --git a/lib/diameter/src/base/diameter_sup.erl b/lib/diameter/src/base/diameter_sup.erl index 482289cb9a..01c51f0856 100644 --- a/lib/diameter/src/base/diameter_sup.erl +++ b/lib/diameter/src/base/diameter_sup.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -42,7 +42,7 @@ -define(TABLES, [{diameter_sequence, [set]}, {diameter_service, [set, {keypos, 3}]}, - {diameter_request, [bag]}, + {diameter_request, [set]}, {diameter_config, [bag, {keypos, 2}]}]). %% start_link/0 diff --git a/lib/diameter/src/base/diameter_traffic.erl b/lib/diameter/src/base/diameter_traffic.erl index 2112941d5e..85378babea 100644 --- a/lib/diameter/src/base/diameter_traffic.erl +++ b/lib/diameter/src/base/diameter_traffic.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2013-2016. All Rights Reserved. +%% Copyright Ericsson AB 2013-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -30,7 +30,7 @@ -export([send_request/4]). %% towards diameter_watchdog --export([receive_message/4]). +-export([receive_message/5]). %% towards diameter_peer_fsm and diameter_watchdog -export([incr/4, @@ -40,11 +40,11 @@ %% towards diameter_service -export([make_recvdata/1, peer_up/1, - peer_down/1, - pending/1]). + peer_down/1]). -%% towards ?MODULE --export([send/1]). %% send from remote node +%% internal +-export([send/1, %% send from remote node + init/1]). %% monitor process start -include_lib("diameter/include/diameter.hrl"). -include("diameter_internal.hrl"). @@ -54,77 +54,85 @@ -define(RELAY, ?DIAMETER_DICT_RELAY). -define(BASE, ?DIAMETER_DICT_COMMON). %% Note: the RFC 3588 dictionary --define(DEFAULT_TIMEOUT, 5000). %% for outgoing requests --define(DEFAULT_SPAWN_OPTS, []). +-define(DEFAULT(V, Def), if V == undefined -> Def; true -> V end). -%% Table containing outgoing requests for which a reply has yet to be -%% received. +%% Table containing outgoing entries that live and die with +%% peer_up/down. The name is historic, since the table used to contain +%% information about outgoing requests for which an answer has yet to +%% be received. -define(REQUEST_TABLE, diameter_request). -%% Workaround for dialyzer's lack of understanding of match specs. --type match(T) - :: T | '_' | '$1' | '$2' | '$3' | '$4'. - %% Record diameter:call/4 options are parsed into. -record(options, - {filter = none :: diameter:peer_filter(), + {peers = [] :: [diameter:peer_ref()], + filter = none :: diameter:peer_filter(), extra = [] :: list(), - timeout = ?DEFAULT_TIMEOUT :: 0..16#FFFFFFFF, + timeout = 5000 :: 0..16#FFFFFFFF, %% for outgoing requests detach = false :: boolean()}). -%% Term passed back to receive_message/4 with every incoming message. +%% Term passed back to receive_message/6 with every incoming message. -record(recvdata, {peerT :: ets:tid(), service_name :: diameter:service_name(), apps :: [#diameter_app{}], sequence :: diameter:sequence(), - codec :: [{string_decode, boolean()} - | {strict_mbit, boolean()} - | {incoming_maxlen, diameter:message_length()}]}). + codec :: #{string_decode := boolean(), + strict_mbit := boolean(), + incoming_maxlen := diameter:message_length()}}). %% Note that incoming_maxlen is currently handled in diameter_peer_fsm, %% so that any message exceeding the maximum is discarded. Retain the %% option in case we want to extend the values and semantics. %% Record stored in diameter_request for each outgoing request. -record(request, - {ref :: match(reference()), %% used to receive answer - caller :: match(pid()), %% calling process - handler :: match(pid()), %% request process - transport :: match(pid()), %% peer process - caps :: match(#diameter_caps{}), %% of connection - packet :: match(#diameter_packet{})}). %% of request + {ref :: reference(), %% used to receive answer + caller :: pid() | undefined, %% calling process + handler :: pid(), %% request process + peer :: undefined | {pid(), #diameter_caps{}}, + packet :: #diameter_packet{} | undefined}). %% of request %% --------------------------------------------------------------------------- -%% # make_recvdata/1 +%% make_recvdata/1 %% --------------------------------------------------------------------------- make_recvdata([SvcName, PeerT, Apps, SvcOpts | _]) -> - {_,_} = Mask = proplists:get_value(sequence, SvcOpts), - #recvdata{service_name = SvcName, - peerT = PeerT, - apps = Apps, - sequence = Mask, - codec = [T || {K,_} = T <- SvcOpts, - lists:member(K, [string_decode, - incoming_maxlen, - strict_mbit])]}. + #{sequence := {_,_} = Mask, spawn_opt := Opts} + = SvcOpts, + {Opts, #recvdata{service_name = SvcName, + peerT = PeerT, + apps = Apps, + sequence = Mask, + codec = maps:with([string_decode, + strict_mbit, + ordered_encode, + incoming_maxlen], + SvcOpts)}}. %% --------------------------------------------------------------------------- %% peer_up/1 %% --------------------------------------------------------------------------- -%% Insert an element that is used to detect whether or not there has -%% been a failover when inserting an outgoing request. +%% Start a process that dies with peer_down/1, on which request +%% processes can monitor. There is no other process that dies with +%% peer_down since failover doesn't imply the loss of transport in the +%% case of a watchdog transition into state SUSPECT. peer_up(TPid) -> - ets:insert(?REQUEST_TABLE, {TPid}). + proc_lib:start(?MODULE, init, [TPid]). + +init(TPid) -> + ets:insert(?REQUEST_TABLE, {TPid, self()}), + proc_lib:init_ack(self()), + proc_lib:hibernate(erlang, exit, [{shutdown, TPid}]). %% --------------------------------------------------------------------------- %% peer_down/1 %% --------------------------------------------------------------------------- peer_down(TPid) -> + [{_, Pid}] = ets:lookup(?REQUEST_TABLE, TPid), ets:delete(?REQUEST_TABLE, TPid), - failover(TPid). + Pid ! ok, %% make it die + Pid. %% --------------------------------------------------------------------------- %% incr/4 @@ -199,71 +207,40 @@ incr_rc(Dir, Pkt, TPid, Dict0) -> incr_rc(Dir, Pkt, TPid, {Dict0, Dict0, Dict0}). %% --------------------------------------------------------------------------- -%% pending/1 -%% --------------------------------------------------------------------------- - -pending(TPids) -> - MatchSpec = [{{'$1', - #request{caller = '$2', - handler = '$3', - transport = '$4', - _ = '_'}, - '_'}, - [?ORCOND([{'==', T, '$4'} || T <- TPids])], - [{{'$1', [{{caller, '$2'}}, - {{handler, '$3'}}, - {{transport, '$4'}}]}}]}], - - try - ets:select(?REQUEST_TABLE, MatchSpec) - catch - error: badarg -> [] %% service has gone down - end. - -%% --------------------------------------------------------------------------- -%% # receive_message/4 +%% receive_message/5 %% -%% Handle an incoming Diameter message. +%% Handle an incoming Diameter message in a watchdog process. %% --------------------------------------------------------------------------- -%% Handle an incoming Diameter message in the watchdog process. This -%% used to come through the service process but this avoids that -%% becoming a bottleneck. - -receive_message(TPid, {Pkt, NPid}, Dict0, RecvData) -> - NPid ! {diameter, incoming(TPid, Pkt, Dict0, RecvData)}; - -receive_message(TPid, Pkt, Dict0, RecvData) -> - incoming(TPid, Pkt, Dict0, RecvData). - -%% incoming/4 - -incoming(TPid, Pkt, Dict0, RecvData) - when is_pid(TPid) -> +-spec receive_message(pid(), Route, #diameter_packet{}, module(), RecvData) + -> pid() %% request handler + | boolean() %% answer, known request or not + | discard %% request discarded by MFA + when Route :: {Handler, RequestRef, Seqs} + | Ack, + RecvData :: {[SpawnOpt], #recvdata{}}, + SpawnOpt :: term(), + Handler :: pid(), + RequestRef :: reference(), + Seqs :: {0..16#FFFFFFFF, 0..16#FFFFFFFF}, + Ack :: boolean(). + +receive_message(TPid, Route, Pkt, Dict0, RecvData) -> #diameter_packet{header = #diameter_header{is_request = R}} = Pkt, - recv(R, - (not R) andalso lookup_request(Pkt, TPid), - TPid, - Pkt, - Dict0, - RecvData). + recv(R, Route, TPid, Pkt, Dict0, RecvData). %% recv/6 %% Incoming request ... -recv(true, false, TPid, Pkt, Dict0, T) -> - try - {request, spawn_request(TPid, Pkt, Dict0, T)} - catch - error: system_limit = E -> %% discard - ?LOG(error, E), - discard - end; +recv(true, Ack, TPid, Pkt, Dict0, T) + when is_boolean(Ack) -> + {Opts, RecvData} = T, + spawn_request(Ack, TPid, Pkt, Dict0, RecvData, Opts); %% ... answer to known request ... -recv(false, #request{ref = Ref, handler = Pid} = Req, _, Pkt, Dict0, _) -> - Pid ! {answer, Ref, Req, Dict0, Pkt}, - {answer, Pid}; +recv(false, {Pid, Ref, TPid}, _, Pkt, Dict0, _) -> + Pid ! {answer, Ref, TPid, Dict0, Pkt}, + true; %% Note that failover could have happened prior to this message being %% received and triggering failback. That is, both a failover message @@ -278,69 +255,91 @@ recv(false, #request{ref = Ref, handler = Pid} = Req, _, Pkt, Dict0, _) -> recv(false, false, TPid, Pkt, _, _) -> ?LOG(discarded, Pkt#diameter_packet.header), incr(TPid, {{unknown, 0}, recv, discarded}), - discard. + false. -%% spawn_request/4 +%% spawn_request/6 -spawn_request(TPid, Pkt, Dict0, {Opts, RecvData}) -> - spawn_request(TPid, Pkt, Dict0, Opts, RecvData); -spawn_request(TPid, Pkt, Dict0, RecvData) -> - spawn_request(TPid, Pkt, Dict0, ?DEFAULT_SPAWN_OPTS, RecvData). +%% An MFA should return a pid() or the atom 'discard'. The latter +%% results in an acknowledgment back to the transport process when +%% appropriate, to ensure that send/recv callbacks can count +%% outstanding requests. Acknowledgement is implicit if the +%% handler process dies (in a handle_request callback for example). +spawn_request(Ack, TPid, Pkt, Dict0, RecvData, {M,F,A}) -> + ReqF = fun() -> + ack(Ack, TPid, recv_request(Ack, TPid, Pkt, Dict0, RecvData)) + end, + ack(Ack, TPid, apply(M, F, [ReqF | A])); + +%% A spawned process acks implicitly when it dies, so there's no need +%% to handle 'discard'. +spawn_request(Ack, TPid, Pkt, Dict0, RecvData, Opts) -> + spawn_opt(fun() -> + recv_request(Ack, TPid, Pkt, Dict0, RecvData) + end, + Opts). + +%% ack/3 -spawn_request(TPid, Pkt, Dict0, Opts, RecvData) -> - spawn_opt(fun() -> recv_request(TPid, Pkt, Dict0, RecvData) end, Opts). +ack(Ack, TPid, RC) -> + RC == discard andalso Ack andalso (TPid ! {send, false}), + RC. %% --------------------------------------------------------------------------- -%% recv_request/4 +%% recv_request/5 %% --------------------------------------------------------------------------- -recv_request(TPid, +-spec recv_request(Ack :: boolean(), + TPid :: pid(), + #diameter_packet{}, + Dict0 :: module(), + #recvdata{}) + -> ok %% answer was sent + | discard %% or not + | false. %% no transport + +recv_request(Ack, + TPid, #diameter_packet{header = #diameter_header{application_id = Id}} = Pkt, Dict0, #recvdata{peerT = PeerT, - apps = Apps, - codec = Opts} + apps = Apps} = RecvData) -> - diameter_codec:setopts([{common_dictionary, Dict0} | Opts]), - send_A(recv_R(diameter_service:find_incoming_app(PeerT, TPid, Id, Apps), - TPid, - Pkt, - Dict0, - RecvData), - TPid, - Dict0, - RecvData). - -%% recv_R/5 - -recv_R({#diameter_app{id = Id, dictionary = AppDict} = App, Caps}, - TPid, - Pkt0, - Dict0, - RecvData) -> - incr(recv, Pkt0, TPid, AppDict), - Pkt = errors(Id, diameter_codec:decode(Id, AppDict, Pkt0)), - incr_error(recv, Pkt, TPid, AppDict), - {Caps, Pkt, App, recv_R(App, TPid, Dict0, Caps, RecvData, Pkt)}; -%% Note that the decode is different depending on whether or not Id is -%% ?APP_ID_RELAY. - -%% DIAMETER_APPLICATION_UNSUPPORTED 3007 -%% A request was sent for an application that is not supported. - -recv_R(#diameter_caps{} - = Caps, - _TPid, - #diameter_packet{errors = Es} - = Pkt, - _Dict0, - _RecvData) -> - {Caps, Pkt#diameter_packet{avps = collect_avps(Pkt), - errors = [3007 | Es]}}; + Ack andalso (TPid ! {handler, self()}), + case diameter_service:find_incoming_app(PeerT, TPid, Id, Apps) of + {#diameter_app{id = Aid, dictionary = AppDict} = App, Caps} -> + incr(recv, Pkt, TPid, AppDict), + DecPkt = decode(Aid, AppDict, RecvData, Pkt), + incr_error(recv, DecPkt, TPid, AppDict), + send_A(recv_R(App, TPid, Dict0, Caps, RecvData, DecPkt), + TPid, + App, + Dict0, + RecvData, + DecPkt, + Caps); + #diameter_caps{} = Caps -> + %% DIAMETER_APPLICATION_UNSUPPORTED 3007 + %% A request was sent for an application that is not + %% supported. + RC = 3007, + Es = Pkt#diameter_packet.errors, + DecPkt = Pkt#diameter_packet{avps = collect_avps(Pkt), + errors = [RC | Es]}, + send_answer(answer_message(RC, Dict0, Caps, DecPkt), + TPid, + Dict0, + Dict0, + Dict0, + RecvData, + DecPkt, + [[]]); + false = No -> %% transport has gone down + No + end. -recv_R(false = No, _, _, _, _) -> %% transport has gone down - No. +decode(Id, Dict, #recvdata{codec = Opts}, Pkt) -> + errors(Id, diameter_codec:decode(Id, Dict, Opts, Pkt)). collect_avps(Pkt) -> case diameter_codec:collect_avps(Pkt) of @@ -350,6 +349,14 @@ collect_avps(Pkt) -> Avps end. +%% send_A/7 + +send_A([T | Fs], TPid, App, Dict0, RecvData, DecPkt, Caps) -> + send_A(T, TPid, App, Dict0, RecvData, DecPkt, Caps, Fs); + +send_A(discard = No, _, _, _, _, _, _) -> + No. + %% recv_R/6 %% Answer errors ourselves ... @@ -359,9 +366,9 @@ recv_R(#diameter_app{options = [_, {request_errors, E} | _]}, _Caps, _RecvData, #diameter_packet{errors = [RC|_]}) %% a detected 3xxx is hd - when E == answer, (Dict0 /= ?BASE orelse 3 == RC div 1000); + when E == answer, Dict0 /= ?BASE orelse 3 == RC div 1000; E == answer_3xxx, 3 == RC div 1000 -> - {{answer_message, rc(RC)}, [], []}; + [{answer_message, rc(RC)}, []]; %% ... or make a handle_request callback. Note that %% Pkt#diameter_packet.msg = undefined in the 3001 case. @@ -453,24 +460,24 @@ errors(_, Pkt) -> %% command code in this case. It will also then ignore Dict and use %% the base encoder. request_cb({reply, _Ans} = T, _App, EvalPktFs, EvalFs) -> - {T, EvalPktFs, EvalFs}; + [T, EvalPktFs | EvalFs]; %% An 3xxx result code, for which the E-bit is set in the header. request_cb({protocol_error, RC}, _App, EvalPktFs, EvalFs) when 3 == RC div 1000 -> - {{answer_message, RC}, EvalPktFs, EvalFs}; + [{answer_message, RC}, EvalPktFs | EvalFs]; request_cb({answer_message, RC} = T, _App, EvalPktFs, EvalFs) when 3 == RC div 1000; 5 == RC div 1000 -> - {T, EvalPktFs, EvalFs}; + [T, EvalPktFs | EvalFs]; %% RFC 3588 says we must reply 3001 to anything unrecognized or %% unsupported. 'noreply' is undocumented (and inappropriately named) %% backwards compatibility for this, protocol_error the documented %% alternative. request_cb(noreply, _App, EvalPktFs, EvalFs) -> - {{answer_message, 3001}, EvalPktFs, EvalFs}; + [{answer_message, 3001}, EvalPktFs | EvalFs]; %% Relay a request to another peer. This is equivalent to doing an %% explicit call/4 with the message in question except that (1) a loop @@ -491,7 +498,7 @@ request_cb({A, Opts}, #diameter_app{id = Id}, EvalPktFs, EvalFs) when A == relay, Id == ?APP_ID_RELAY; A == proxy, Id /= ?APP_ID_RELAY; A == resend -> - {{call, Opts}, EvalPktFs, EvalFs}; + [{call, Opts}, EvalPktFs | EvalFs]; request_cb(discard = No, _, _, _) -> No; @@ -505,71 +512,95 @@ request_cb({eval, RC, F}, App, EvalPktFs, Fs) -> request_cb(T, App, _, _) -> ?ERROR({invalid_return, T, handle_request, App}). -%% send_A/4 +%% send_A/8 + +send_A({reply, Ans}, TPid, App, Dict0, RecvData, Pkt, _Caps, Fs) -> + AppDict = App#diameter_app.dictionary, + MsgDict = msg_dict(AppDict, Dict0, Ans), + send_answer(Ans, + TPid, + MsgDict, + AppDict, + Dict0, + RecvData, + Pkt, + Fs); + +send_A({call, Opts}, TPid, App, Dict0, RecvData, Pkt, Caps, Fs) -> + AppDict = App#diameter_app.dictionary, + case resend(Opts, Caps, Pkt, App, Dict0, RecvData) of + #diameter_packet{bin = Bin} = Ans -> %% answer: reset hop by hop id + #diameter_packet{header = #diameter_header{hop_by_hop_id = Id}, + transport_data = TD} + = Pkt, + Reset = diameter_codec:hop_by_hop_id(Id, Bin), + MsgDict = msg_dict(AppDict, Dict0, Ans), + send_answer(Ans#diameter_packet{bin = Reset, + transport_data = TD}, + TPid, + MsgDict, + AppDict, + Dict0, + Fs); + RC -> + send_answer(answer_message(RC, Dict0, Caps, Pkt), + TPid, + Dict0, + AppDict, + Dict0, + RecvData, + Pkt, + Fs) + end; + +%% RFC 3588 only allows 3xxx errors in an answer-message. RFC 6733 +%% added the possibility of setting 5xxx. -send_A({Caps, Pkt}, TPid, Dict0, _RecvData) -> %% unsupported application - #diameter_packet{errors = [RC|_]} = Pkt, - send_A(answer_message(RC, Caps, Dict0, Pkt), - TPid, - {Dict0, Dict0}, - Pkt, - [], - []); +send_A({answer_message, RC} = T, TPid, App, Dict0, RecvData, Pkt, Caps, Fs) -> + Dict0 /= ?BASE orelse 3 == RC div 1000 + orelse ?ERROR({invalid_return, T, handle_request, App}), + send_answer(answer_message(RC, Dict0, Caps, Pkt), + TPid, + Dict0, + App#diameter_app.dictionary, + Dict0, + RecvData, + Pkt, + Fs). -send_A({Caps, Pkt, App, {T, EvalPktFs, EvalFs}}, TPid, Dict0, RecvData) -> - send_A(answer(T, Caps, Pkt, App, Dict0, RecvData), - TPid, - {App#diameter_app.dictionary, Dict0}, - Pkt, - EvalPktFs, - EvalFs); +%% send_answer/8 -send_A(_, _, _, _) -> - ok. +%% Skip the setting of Result-Code and Failed-AVP's below. This is +%% undocumented and shouldn't be relied on. +send_answer([Ans], TPid, MsgDict, AppDict, Dict0, RecvData, Pkt, Fs) + when [] == Pkt#diameter_packet.errors -> + send_answer(Ans, TPid, MsgDict, AppDict, Dict0, RecvData, Pkt, Fs); +send_answer([Ans], TPid, MsgDict, AppDict, Dict0, RecvData, Pkt0, Fs) -> + Pkt = Pkt0#diameter_packet{errors = []}, + send_answer(Ans, TPid, MsgDict, AppDict, Dict0, RecvData, Pkt, Fs); + +send_answer(Ans, TPid, MsgDict, AppDict, Dict0, RecvData, DecPkt, Fs) -> + Pkt = encode({MsgDict, AppDict}, + TPid, + RecvData#recvdata.codec, + make_answer_packet(Ans, DecPkt, MsgDict, Dict0)), + send_answer(Pkt, TPid, MsgDict, AppDict, Dict0, Fs). -%% send_A/6 +%% send_answer/6 -send_A(T, TPid, {AppDict, Dict0} = DictT0, ReqPkt, EvalPktFs, EvalFs) -> - {MsgDict, Pkt} = reply(T, TPid, DictT0, EvalPktFs, ReqPkt), +send_answer(Pkt, TPid, MsgDict, AppDict, Dict0, [EvalPktFs | EvalFs]) -> + eval_packet(Pkt, EvalPktFs), incr(send, Pkt, TPid, AppDict), incr_rc(send, Pkt, TPid, {MsgDict, AppDict, Dict0}), %% count outgoing - send(TPid, Pkt), + send(TPid, z(Pkt), _Route = self()), lists:foreach(fun diameter_lib:eval/1, EvalFs). -%% answer/6 - -answer({reply, Ans}, _Caps, _Pkt, App, Dict0, _RecvData) -> - {msg_dict(App#diameter_app.dictionary, Dict0, Ans), Ans}; - -answer({call, Opts}, Caps, Pkt, App, Dict0, RecvData) -> - #diameter_caps{origin_host = {OH,_}} - = Caps, - #diameter_packet{avps = Avps} - = Pkt, - {Code, _Flags, Vid} = Dict0:avp_header('Route-Record'), - resend(is_loop(Code, Vid, OH, Dict0, Avps), - Opts, - Caps, - Pkt, - App, - Dict0, - RecvData); - -%% RFC 3588 only allows 3xxx errors in an answer-message. RFC 6733 -%% added the possibility of setting 5xxx. -answer({answer_message, RC} = T, Caps, Pkt, App, Dict0, _RecvData) -> - Dict0 /= ?BASE orelse 3 == RC div 1000 - orelse ?ERROR({invalid_return, T, handle_request, App}), - answer_message(RC, Caps, Dict0, Pkt). - %% msg_dict/3 %% %% Return the dictionary defining the message grammar in question: the %% application dictionary or the common dictionary. -msg_dict(AppDict, Dict0, [Msg]) - when is_list(Msg); - is_tuple(Msg) -> +msg_dict(AppDict, Dict0, [Msg]) -> msg_dict(AppDict, Dict0, Msg); msg_dict(AppDict, Dict0, Msg) -> @@ -600,14 +631,10 @@ is_answer_message(Rec, Dict) -> error:_ -> false end. -%% answer_message/4 +%% resend/6 -answer_message(RC, - #diameter_caps{origin_host = {OH,_}, - origin_realm = {OR,_}}, - Dict0, - Pkt) -> - {Dict0, answer_message(OH, OR, RC, Dict0, Pkt)}. +resend(Opts, Caps, Pkt, App, Dict0, RecvData) -> + resend(is_loop(Dict0, Caps, Pkt), Opts, Caps, Pkt, App, Dict0, RecvData). %% resend/7 @@ -617,8 +644,8 @@ answer_message(RC, %% if one is available, but the peer reporting the error has %% identified a configuration problem. -resend(true, _Opts, Caps, Pkt, _App, Dict0, _RecvData) -> - answer_message(3005, Caps, Dict0, Pkt); +resend(true, _Opts, _Caps, _Pkt, _App, _Dict0, _RecvData) -> + 3005; %% 6.1.8. Relaying and Proxying Requests %% @@ -628,11 +655,9 @@ resend(true, _Opts, Caps, Pkt, _App, Dict0, _RecvData) -> resend(false, Opts, - #diameter_caps{origin_host = {_,OH}} - = Caps, + #diameter_caps{origin_host = {_,OH}}, #diameter_packet{header = Hdr0, - avps = Avps} - = Pkt, + avps = Avps}, App, Dict0, #recvdata{service_name = SvcName, @@ -641,7 +666,12 @@ resend(false, Seq = diameter_session:sequence(Mask), Hdr = Hdr0#diameter_header{hop_by_hop_id = Seq}, Msg = [Hdr, Route | Avps], %% reordered at encode - resend(send_request(SvcName, App, Msg, Opts), Caps, Dict0, Pkt). + case send_request(SvcName, App, Msg, Opts) of + #diameter_packet{} = Ans -> + Ans; + _ -> + 3002 %% DIAMETER_UNABLE_TO_DELIVER. + end. %% The incoming request is relayed with the addition of a %% Route-Record. Note the requirement on the return from call/4 below, %% which places a requirement on the value returned by the @@ -658,96 +688,38 @@ resend(false, %% RFC 6.3 says that a relay agent does not modify Origin-Host but %% says nothing about a proxy. Assume it should behave the same way. -%% resend/4 -%% -%% Relay a reply to a relayed request. - -%% Answer from the peer: reset the hop by hop identifier. -resend(#diameter_packet{bin = B} - = Pkt, - _Caps, - _Dict0, - #diameter_packet{header = #diameter_header{hop_by_hop_id = Id}, - transport_data = TD}) -> - Pkt#diameter_packet{bin = diameter_codec:hop_by_hop_id(Id, B), - transport_data = TD}; -%% TODO: counters +%% is_loop/3 -%% Or not: DIAMETER_UNABLE_TO_DELIVER. -resend(_, Caps, Dict0, Pkt) -> - answer_message(3002, Caps, Dict0, Pkt). +is_loop(Dict0, + #diameter_caps{origin_host = {OH,_}}, + #diameter_packet{avps = Avps}) -> + {Code, _Flags, Vid} = Dict0:avp_header('Route-Record'), + is_loop(Code, Vid, OH, Avps). -%% is_loop/5 +%% is_loop/4 %% %% Is there a Route-Record AVP with our Origin-Host? -is_loop(Code, - Vid, - Bin, - _Dict0, - [#diameter_avp{code = Code, vendor_id = Vid, data = Bin} | _]) -> +is_loop(Code, Vid, Bin, [#diameter_avp{code = Code, + vendor_id = Vid, + data = Bin} + | _]) -> true; -is_loop(_, _, _, _, []) -> +is_loop(_, _, _, []) -> false; -is_loop(Code, Vid, OH, Dict0, [_ | Avps]) +is_loop(Code, Vid, OH, [_ | Avps]) when is_binary(OH) -> - is_loop(Code, Vid, OH, Dict0, Avps); - -is_loop(Code, Vid, OH, Dict0, Avps) -> - is_loop(Code, Vid, Dict0:avp(encode, OH, 'Route-Record'), Dict0, Avps). - -%% reply/5 - -%% Local answer ... -reply({MsgDict, Ans}, TPid, {AppDict, Dict0}, Fs, ReqPkt) -> - local(Ans, TPid, {MsgDict, AppDict, Dict0}, Fs, ReqPkt); - -%% ... or relayed. -reply(#diameter_packet{} = Pkt, _TPid, {AppDict, Dict0}, Fs, _ReqPkt) -> - eval_packet(Pkt, Fs), - {msg_dict(AppDict, Dict0, Pkt), Pkt}. - -%% local/5 -%% -%% Send a locally originating reply. - -%% Skip the setting of Result-Code and Failed-AVP's below. This is -%% undocumented and shouldn't be relied on. -local([Msg], TPid, DictT, Fs, ReqPkt) - when is_list(Msg); - is_tuple(Msg) -> - local(Msg, TPid, DictT, Fs, ReqPkt#diameter_packet{errors = []}); - -local(Msg, TPid, {MsgDict, AppDict, Dict0}, Fs, ReqPkt) -> - Pkt = encode({MsgDict, AppDict}, - TPid, - reset(make_answer_packet(Msg, ReqPkt), MsgDict, Dict0), - Fs), - {MsgDict, Pkt}. - -%% reset/3 + is_loop(Code, Vid, OH, Avps); -%% Header/avps list: send as is. -reset(#diameter_packet{msg = [#diameter_header{} | _]} = Pkt, _, _) -> - Pkt; - -%% No errors to set or errors explicitly ignored. -reset(#diameter_packet{errors = Es} = Pkt, _, _) - when Es == []; - Es == false -> - Pkt; - -%% Otherwise possibly set Result-Code and/or Failed-AVP. -reset(#diameter_packet{msg = Msg, errors = Es} = Pkt, Dict, Dict0) -> - {RC, Failed} = select_error(Msg, Es, Dict0), - Pkt#diameter_packet{msg = reset(Msg, Dict, RC, Failed)}. +is_loop(Code, Vid, OH, Avps) -> + is_loop(Code, Vid, list_to_binary(OH), Avps). %% select_error/3 %% %% Extract the first appropriate RC or {RC, #diameter_avp{}} -%% pair from an errors list, and accumulate all #diameter_avp{}. +%% pair from an errors list, along with any leading #diameter_avp{}. %% %% RFC 6733: %% @@ -762,95 +734,138 @@ reset(#diameter_packet{msg = Msg, errors = Es} = Pkt, Dict, Dict0) -> %% indicated by the Result-Code AVP. For practical purposes, this %% Failed-AVP would typically refer to the first AVP processing error %% that a Diameter node encounters. +%% +%% 3xxx can only be set in an answer setting the E-bit. RFC 6733 also +%% allows 5xxx, RFC 3588 doesn't. -select_error(Msg, Es, Dict0) -> - {RC, Avps} = lists:foldl(fun(T,A) -> select(T, A, Dict0) end, - {is_answer_message(Msg, Dict0), []}, - Es), - {RC, lists:reverse(Avps)}. +select_error(E, Es, Dict0) -> + select(E, Es, Dict0, []). -%% Only integer() and {integer(), #diameter_avp{}} are the result of -%% decode. #diameter_avp{} can only be set in a reply for encode. +%% select/4 -select(#diameter_avp{} = A, {RC, As}, _) -> - {RC, [A|As]}; +select(E, [{RC, _} = T | Es], Dict0, Avps) -> + select(E, RC, T, Es, Dict0, Avps); -select(_, {RC, _} = Acc, _) - when is_integer(RC) -> - Acc; +select(E, [#diameter_avp{} = A | Es], Dict0, Avps) -> + select(E, Es, Dict0, [A | Avps]); -select({RC, #diameter_avp{} = A}, {IsAns, As} = Acc, Dict0) - when is_integer(RC) -> - case is_result(RC, IsAns, Dict0) of - true -> {RC, [A|As]}; - false -> Acc - end; +select(E, [RC | Es], Dict0, Avps) -> + select(E, RC, RC, Es, Dict0, Avps); -select(RC, {IsAns, As} = Acc, Dict0) - when is_boolean(IsAns), is_integer(RC) -> - case is_result(RC, IsAns, Dict0) of - true -> {RC, As}; - false -> Acc - end. +select(_, [], _, Avps) -> + Avps. -%% reset/4 +%% select/6 + +select(E, RC, T, _, Dict0, Avps) + when E, 3000 =< RC, RC < 4000; %% E-bit with 3xxx + E, ?BASE /= Dict0, 5000 =< RC, RC < 6000; %% E-bit with 5xxx + not E, RC < 3000 orelse 4000 =< RC -> %% no E-bit + [T | Avps]; -reset(Msg, Dict, RC, Avps) -> - FailedAVP = failed_avp(Msg, Avps, Dict), - ResultCode = rc(Msg, RC, Dict), - set(set(Msg, FailedAVP, Dict), ResultCode, Dict). +select(E, _, _, Es, Dict0, Avps) -> + select(E, Es, Dict0, Avps). %% eval_packet/2 eval_packet(Pkt, Fs) -> lists:foreach(fun(F) -> diameter_lib:eval([F,Pkt]) end, Fs). -%% make_answer_packet/2 +%% make_answer_packet/4 %% Use decode errors to set Result-Code and/or Failed-AVP unless the %% the errors field has been explicitly set. Unfortunately, the %% default value is the empty list rather than 'undefined' so use the %% atom 'false' for "set nothing". (This is historical and changing -%% the default value would require modules including diameter.hrl to -%% be recompiled.) -make_answer_packet(#diameter_packet{errors = []} - = Pkt, - #diameter_packet{errors = [_|_] = Es} - = ReqPkt) -> - make_answer_packet(Pkt#diameter_packet{errors = Es}, ReqPkt); +%% the default value would impact anyone expecting relying on the old +%% default.) -%% A reply message clears the R and T flags and retains the P flag. -%% The E flag will be set at encode. 6.2 of 3588 requires the same P -%% flag on an answer as on the request. A #diameter_packet{} returned -%% from a handle_request callback can circumvent this by setting its -%% own header values. make_answer_packet(#diameter_packet{header = Hdr, msg = Msg, errors = Es, transport_data = TD}, - #diameter_packet{header = ReqHdr}) -> - Hdr0 = ReqHdr#diameter_header{version = ?DIAMETER_VERSION, - is_request = false, - is_error = undefined, - is_retransmitted = false}, - #diameter_packet{header = fold_record(Hdr0, Hdr), - msg = Msg, - errors = Es, + #diameter_packet{header = Hdr0, + errors = Es0}, + MsgDict, + Dict0) -> + #diameter_packet{header = make_answer_header(Hdr0, Hdr), + msg = reset(Msg, Es0, Es, MsgDict, Dict0), transport_data = TD}; %% Binaries and header/avp lists are sent as-is. -make_answer_packet(Bin, #diameter_packet{transport_data = TD}) +make_answer_packet(Bin, #diameter_packet{transport_data = TD}, _, _) when is_binary(Bin) -> #diameter_packet{bin = Bin, transport_data = TD}; make_answer_packet([#diameter_header{} | _] = Msg, - #diameter_packet{transport_data = TD}) -> + #diameter_packet{transport_data = TD}, + _, + _) -> #diameter_packet{msg = Msg, transport_data = TD}; -%% Otherwise, preserve transport_data. -make_answer_packet(Msg, #diameter_packet{transport_data = TD} = Pkt) -> - make_answer_packet(#diameter_packet{msg = Msg, transport_data = TD}, Pkt). +make_answer_packet(Msg, + #diameter_packet{header = Hdr, + errors = Es, + transport_data = TD}, + MsgDict, + Dict0) -> + #diameter_packet{header = make_answer_header(Hdr, undefined), + msg = reset(Msg, [], Es, MsgDict, Dict0), + transport_data = TD}. + +%% make_answer_header/2 + +%% A reply message clears the R and T flags and retains the P flag. +%% The E flag will be set at encode. 6.2 of 3588 requires the same P +%% flag on an answer as on the request. A #diameter_packet{} returned +%% from a handle_request callback can circumvent this by setting its +%% own header values. +make_answer_header(ReqHdr, Hdr) -> + Hdr0 = ReqHdr#diameter_header{version = ?DIAMETER_VERSION, + is_request = false, + is_error = undefined, + is_retransmitted = false}, + fold_record(Hdr0, Hdr). + +%% reset/5 + +reset(Msg, [_|_] = Es0, [] = Es, MsgDict, Dict0) -> + reset(Msg, Es, Es0, MsgDict, Dict0); + +reset(Msg, _, Es, _, _) + when Es == false; + Es == [] -> + Msg; + +reset(Msg, _, Es, MsgDict, Dict0) -> + E = is_answer_message(Msg, Dict0), + reset(Msg, select_error(E, Es, Dict0), choose(E, Dict0, MsgDict)). + +%% reset/4 +%% +%% Set Result-Code and/or Failed-AVP (maybe). Only RC and {RC, AVP} +%% are the result of decode. AVP or {RC, [AVP]} can be set in an +%% answer for encode, as a convenience for injecting additional AVPs +%% into Failed-AVP; eg. 5001 = DIAMETER_AVP_UNSUPPORTED. + +reset(Msg, [], _) -> + Msg; + +reset(Msg, [{RC, As} | Avps], Dict) + when is_list(As) -> + reset(Msg, [RC | As ++ Avps], Dict); + +reset(Msg, [{RC, Avp} | Avps], Dict) -> + reset(Msg, [RC, Avp | Avps], Dict); + +reset(Msg, [#diameter_avp{} | _] = Avps, Dict) -> + set(Msg, failed_avp(Msg, Avps, Dict), Dict); + +reset(Msg, [RC | Avps], Dict) -> + set(Msg, rc(Msg, RC, Dict) ++ failed_avp(Msg, Avps, Dict), Dict). + +%% set/3 %% Reply as name and tuple list ... set([_|_] = Ans, Avps, _) -> @@ -864,11 +879,7 @@ set(Rec, Avps, Dict) -> %% %% Turn the result code into a list if its optional and only set it if %% the arity is 1 or {0,1}. In other cases (which probably shouldn't -%% exist in practise) we can't know what's appropriate. - -rc(_, B, _) - when is_boolean(B) -> - []; +%% exist in practice) we can't know what's appropriate. rc([MsgName | _], RC, Dict) -> K = 'Result-Code', @@ -886,8 +897,8 @@ rc(Rec, RC, Dict) -> failed_avp(_, [] = No, _) -> No; -failed_avp(Rec, Avps, Dict) -> - [failed(Rec, [{'AVP', Avps}], Dict)]. +failed_avp(Msg, [_|_] = Avps, Dict) -> + [failed(Msg, [{'AVP', Avps}], Dict)]. %% Reply as name and tuple list ... failed([MsgName | Values], FailedAvp, Dict) -> @@ -911,7 +922,7 @@ failed(Rec, FailedAvp, Dict) -> {'Failed-AVP', [FailedAvp]} catch error: _ -> - Avps = Dict:'get-'('AVP', Rec), + Avps = Dict:'#get-'('AVP', Rec), A = #diameter_avp{name = 'Failed-AVP', value = FailedAvp}, {'AVP', [A|Avps]} @@ -984,22 +995,26 @@ failed(Rec, FailedAvp, Dict) -> %% Error-Message AVP is not intended to be useful in real-time, and %% SHOULD NOT be expected to be parsed by network entities. -%% answer_message/5 +%% answer_message/4 -answer_message(OH, OR, RC, Dict0, #diameter_packet{avps = Avps, - errors = Es}) -> +answer_message(RC, + Dict0, + #diameter_caps{origin_host = {OH,_}, + origin_realm = {OR,_}}, + #diameter_packet{avps = Avps, + errors = Es}) -> {Code, _, Vid} = Dict0:avp_header('Session-Id'), ['answer-message', {'Origin-Host', OH}, {'Origin-Realm', OR}, {'Result-Code', RC}] - ++ session_id(Code, Vid, Dict0, Avps) + ++ session_id(Code, Vid, Avps) ++ failed_avp(RC, Es). -session_id(Code, Vid, Dict0, Avps) +session_id(Code, Vid, Avps) when is_list(Avps) -> try #diameter_avp{data = Bin} = find_avp(Code, Vid, Avps), - [{'Session-Id', [Dict0:avp(decode, Bin, 'Session-Id')]}] + [{'Session-Id', [Bin]}] catch error: _ -> [] @@ -1219,8 +1234,6 @@ get_result(Dict, Msg) -> try [throw(A) || N <- ['Result-Code', 'Experimental-Result'], #diameter_avp{} = A <- [get_avp(Dict, N, Msg)]] - of - [] -> false catch #diameter_avp{} = A -> A end. @@ -1229,7 +1242,7 @@ x(T) -> exit(T). %% --------------------------------------------------------------------------- -%% # send_request/4 +%% send_request/4 %% %% Handle an outgoing Diameter request. %% --------------------------------------------------------------------------- @@ -1282,11 +1295,10 @@ answer_rc(_, _, Sent) -> %% %% In the process spawned for the outgoing request. -send_R(SvcName, AppOrAlias, Msg, Opts, Caller) -> - case pick_peer(SvcName, AppOrAlias, Msg, Opts) of - {Transport, Mask, SvcOpts} -> - diameter_codec:setopts(SvcOpts), - send_request(Transport, Mask, Msg, Opts, Caller, SvcName); +send_R(SvcName, AppOrAlias, Msg, CallOpts, Caller) -> + case pick_peer(SvcName, AppOrAlias, Msg, CallOpts) of + {{_,_} = Transport, SvcOpts} -> + send_request(Transport, SvcOpts, Msg, CallOpts, Caller, SvcName); {error, _} = No -> No end. @@ -1294,31 +1306,45 @@ send_R(SvcName, AppOrAlias, Msg, Opts, Caller) -> %% make_options/1 make_options(Options) -> - lists:foldl(fun mo/2, #options{}, Options). - -mo({timeout, T}, Rec) - when is_integer(T), 0 =< T -> - Rec#options{timeout = T}; - -mo({filter, F}, #options{filter = none} = Rec) -> - Rec#options{filter = F}; -mo({filter, F}, #options{filter = {all, Fs}} = Rec) -> - Rec#options{filter = {all, [F | Fs]}}; -mo({filter, F}, #options{filter = F0} = Rec) -> - Rec#options{filter = {all, [F0, F]}}; - -mo({extra, L}, #options{extra = X} = Rec) + make_opts(Options, [], false, [], none, 5000). + +%% Do our own recursion since this is faster than a lists:foldl/3 +%% setting elements in an #options{} accumulator. + +make_opts([], Peers, Detach, Extra, Filter, Tmo) -> + #options{peers = lists:reverse(Peers), + detach = Detach, + extra = Extra, + filter = Filter, + timeout = Tmo}; + +make_opts([{timeout, Tmo} | Rest], Peers, Detach, Extra, Filter, _) + when is_integer(Tmo), 0 =< Tmo -> + make_opts(Rest, Peers, Detach, Extra, Filter, Tmo); + +make_opts([{filter, F} | Rest], Peers, Detach, Extra, none, Tmo) -> + make_opts(Rest, Peers, Detach, Extra, F, Tmo); +make_opts([{filter, F} | Rest], Peers, Detach, Extra, {all, Fs}, Tmo) -> + make_opts(Rest, Peers, Detach, Extra, {all, [F|Fs]}, Tmo); +make_opts([{filter, F} | Rest], Peers, Detach, Extra, F0, Tmo) -> + make_opts(Rest, Peers, Detach, Extra, {all, [F0, F]}, Tmo); + +make_opts([{extra, L} | Rest], Peers, Detach, Extra, Filter, Tmo) when is_list(L) -> - Rec#options{extra = X ++ L}; + make_opts(Rest, Peers, Detach, Extra ++ L, Filter, Tmo); + +make_opts([detach | Rest], Peers, _, Extra, Filter, Tmo) -> + make_opts(Rest, Peers, true, Extra, Filter, Tmo); -mo(detach, Rec) -> - Rec#options{detach = true}; +make_opts([{peer, TPid} | Rest], Peers, Detach, Extra, Filter, Tmo) + when is_pid(TPid) -> + make_opts(Rest, [TPid | Peers], Detach, Extra, Filter, Tmo); -mo(T, _) -> +make_opts([T | _], _, _, _, _, _) -> ?ERROR({invalid_option, T}). %% --------------------------------------------------------------------------- -%% # send_request/6 +%% send_request/6 %% --------------------------------------------------------------------------- %% Send an outgoing request in its dedicated process. @@ -1331,44 +1357,51 @@ mo(T, _) -> %% The module field of the #diameter_app{} here includes any extra %% arguments passed to diameter:call/4. -send_request({TPid, Caps, App} +send_request({{TPid, _Caps} = TC, App} = Transport, - Mask, - Msg, - Opts, + #{sequence := Mask} + = SvcOpts, + Msg0, + CallOpts, Caller, SvcName) -> - Pkt = make_prepare_packet(Mask, Msg), - - send_R(cb(App, prepare_request, [Pkt, SvcName, {TPid, Caps}]), - Pkt, - Transport, - Opts, - Caller, - SvcName, - []). + Pkt = make_prepare_packet(Mask, Msg0), + + case prepare(cb(App, prepare_request, [Pkt, SvcName, TC]), []) of + [Msg | Fs] -> + ReqPkt = make_request_packet(Msg, Pkt), + EncPkt = encode(App#diameter_app.dictionary, + TPid, + SvcOpts, + ReqPkt), + eval_packet(EncPkt, Fs), + T = send_R(ReqPkt, EncPkt, Transport, CallOpts, Caller, SvcName), + Ans = recv_answer(SvcName, App, CallOpts, T), + handle_answer(SvcName, SvcOpts, App, Ans); + {discard, Reason} -> + {error, Reason}; + discard -> + {error, discarded}; + {error, Reason} -> + ?ERROR({invalid_return, Reason, prepare_request, App}) + end. -%% send_R/7 +%% prepare/2 -send_R({send, Msg}, Pkt, Transport, Opts, Caller, SvcName, Fs) -> - send_R(make_request_packet(Msg, Pkt), - Transport, - Opts, - Caller, - SvcName, - Fs); +prepare({send, Msg}, Fs) -> + [Msg | Fs]; -send_R({discard, Reason} , _, _, _, _, _, _) -> - {error, Reason}; +prepare({eval_packet, RC, F}, Fs) -> + prepare(RC, [F|Fs]); -send_R(discard, _, _, _, _, _, _) -> - {error, discarded}; +prepare({discard, _Reason} = RC, _) -> + RC; -send_R({eval_packet, RC, F}, Pkt, T, Opts, Caller, SvcName, Fs) -> - send_R(RC, Pkt, T, Opts, Caller, SvcName, [F|Fs]); +prepare(discard = RC, _) -> + RC; -send_R(E, _, {_, _, App}, _, _, _, _) -> - ?ERROR({invalid_return, E, prepare_request, App}). +prepare(Reason, _) -> + {error, Reason}. %% make_prepare_packet/2 %% @@ -1388,43 +1421,39 @@ make_prepare_packet(Mask, #diameter_packet{msg = [#diameter_header{} = Hdr make_prepare_packet(Mask, #diameter_packet{header = Hdr} = Pkt) -> Pkt#diameter_packet{header = make_prepare_header(Mask, Hdr)}; +make_prepare_packet(Mask, [#diameter_header{} = Hdr | Avps]) -> + #diameter_packet{msg = [make_prepare_header(Mask, Hdr) | Avps]}; + make_prepare_packet(Mask, Msg) -> - make_prepare_packet(Mask, #diameter_packet{msg = Msg}). + #diameter_packet{header = make_prepare_header(Mask, undefined), + msg = Msg}. %% make_prepare_header/2 make_prepare_header(Mask, undefined) -> Seq = diameter_session:sequence(Mask), - make_prepare_header(#diameter_header{end_to_end_id = Seq, - hop_by_hop_id = Seq}); - -make_prepare_header(Mask, #diameter_header{end_to_end_id = undefined, - hop_by_hop_id = undefined} - = H) -> - Seq = diameter_session:sequence(Mask), - make_prepare_header(H#diameter_header{end_to_end_id = Seq, - hop_by_hop_id = Seq}); - -make_prepare_header(Mask, #diameter_header{end_to_end_id = undefined} = H) -> - Seq = diameter_session:sequence(Mask), - make_prepare_header(H#diameter_header{end_to_end_id = Seq}); - -make_prepare_header(Mask, #diameter_header{hop_by_hop_id = undefined} = H) -> - Seq = diameter_session:sequence(Mask), - make_prepare_header(H#diameter_header{hop_by_hop_id = Seq}); - -make_prepare_header(_, Hdr) -> - make_prepare_header(Hdr). - -%% make_prepare_header/1 - -make_prepare_header(#diameter_header{version = undefined} = Hdr) -> - make_prepare_header(Hdr#diameter_header{version = ?DIAMETER_VERSION}); - -make_prepare_header(#diameter_header{} = Hdr) -> - Hdr; - -make_prepare_header(T) -> + #diameter_header{version = ?DIAMETER_VERSION, + end_to_end_id = Seq, + hop_by_hop_id = Seq}; + +make_prepare_header(Mask, #diameter_header{version = V, + end_to_end_id = EI, + hop_by_hop_id = HI} + = H) + when EI == undefined; + HI == undefined -> + Id = diameter_session:sequence(Mask), + H#diameter_header{version = ?DEFAULT(V, ?DIAMETER_VERSION), + end_to_end_id = ?DEFAULT(EI, Id), + hop_by_hop_id = ?DEFAULT(HI, Id)}; + +make_prepare_header(_, #diameter_header{version = undefined} = H) -> + H#diameter_header{version = ?DIAMETER_VERSION}; + +make_prepare_header(_, #diameter_header{} = H) -> + H; + +make_prepare_header(_, T) -> ?ERROR({invalid_header, T}). %% make_request_packet/2 @@ -1452,7 +1481,7 @@ make_request_packet(#diameter_packet{header = Hdr} = Pkt, make_request_packet(Msg, Pkt) -> Pkt#diameter_packet{msg = Msg}. -%% make_retransmit_packet/2 +%% make_retransmit_packet/1 make_retransmit_packet(#diameter_packet{msg = [#diameter_header{} = Hdr | Avps]} @@ -1468,136 +1497,139 @@ make_retransmit_header(Hdr) -> Hdr#diameter_header{is_retransmitted = true}. %% fold_record/2 +%% +%% Replace elements in the first record by those in the second that +%% differ from undefined. -fold_record(undefined, R) -> - R; -fold_record(Rec, R) -> - diameter_lib:fold_tuple(2, Rec, R). +fold_record(Rec0, undefined) -> + Rec0; +fold_record(Rec0, Rec) -> + list_to_tuple(fold(tuple_to_list(Rec0), tuple_to_list(Rec))). + +fold([], []) -> + []; +fold([H | T0], [undefined | T]) -> + [H | fold(T0, T)]; +fold([_ | T0], [H | T]) -> + [H | fold(T0, T)]. %% send_R/6 -send_R(Pkt0, - {TPid, Caps, #diameter_app{dictionary = AppDict} = App}, - Opts, +send_R(ReqPkt, + EncPkt, + {{TPid, _Caps} = TC, #diameter_app{dictionary = AppDict}}, + #options{timeout = Timeout}, {Pid, Ref}, - SvcName, - Fs) -> - Pkt = encode(AppDict, TPid, Pkt0, Fs), - - #options{timeout = Timeout} - = Opts, - + SvcName) -> Req = #request{ref = Ref, caller = Pid, handler = self(), - transport = TPid, - caps = Caps, - packet = Pkt0}, + peer = TC, + packet = ReqPkt}, - incr(send, Pkt, TPid, AppDict), - TRef = send_request(TPid, Pkt, Req, SvcName, Timeout), + incr(send, EncPkt, TPid, AppDict), + {TRef, MRef} = zend_requezt(TPid, EncPkt, Req, SvcName, Timeout), Pid ! Ref, %% tell caller a send has been attempted - handle_answer(SvcName, - App, - recv_A(Timeout, SvcName, App, Opts, {TRef, Req})). + {TRef, MRef, Req}. -%% recv_A/5 +%% recv_answer/4 -recv_A(Timeout, SvcName, App, Opts, {TRef, #request{ref = Ref} = Req}) -> +recv_answer(SvcName, App, CallOpts, {TRef, MRef, #request{ref = Ref} + = Req}) -> %% Matching on TRef below ensures we ignore messages that pertain %% to a previous transport prior to failover. The answer message - %% includes the #request{} since it's not necessarily Req; that - %% is, from the last peer to which we've transmitted. + %% includes the pid of the transport on which it was received, + %% which may not be the last peer to which we've transmitted. receive - {answer = A, Ref, Rq, Dict0, Pkt} -> %% Answer from peer - {A, Rq, Dict0, Pkt}; + {answer = A, Ref, TPid, Dict0, Pkt} -> %% Answer from peer + {A, #request{} = erase(TPid), Dict0, Pkt}; {timeout = Reason, TRef, _} -> %% No timely reply {error, Req, Reason}; - {failover, TRef} -> %% Service says peer has gone down - retransmit(pick_peer(SvcName, App, Req, Opts), - Req, - Opts, - SvcName, - Timeout) + {'DOWN', MRef, process, _, _} when false /= MRef -> %% local peer_down + failover(SvcName, App, Req, CallOpts); + {failover, TRef} -> %% local or remote peer_down + failover(SvcName, App, Req, CallOpts) end. -%% handle_answer/3 +%% failover/4 + +failover(SvcName, App, Req, CallOpts) -> + resend_request(pick_peer(SvcName, App, Req, CallOpts), + Req, + CallOpts, + SvcName). -handle_answer(SvcName, App, {error, Req, Reason}) -> - handle_error(App, Req, Reason, SvcName); +%% handle_answer/4 + +handle_answer(SvcName, _, App, {error, Req, Reason}) -> + #request{packet = Pkt, + peer = {_TPid, _Caps} = TC} + = Req, + cb(App, handle_error, [Reason, msg(Pkt), SvcName, TC]); handle_answer(SvcName, - #diameter_app{dictionary = AppDict, - id = Id} + SvcOpts, + #diameter_app{id = Id, + dictionary = AppDict, + options = [{answer_errors, AE} | _]} = App, {answer, Req, Dict0, Pkt}) -> MsgDict = msg_dict(AppDict, Dict0, Pkt), - handle_A(errors(Id, diameter_codec:decode({MsgDict, AppDict}, Pkt)), - SvcName, - MsgDict, - Dict0, - App, - Req). - -%% We don't really need to do a full decode if we're a relay and will -%% just resend with a new hop by hop identifier, but might a proxy -%% want to examine the answer? - -handle_A(Pkt, SvcName, Dict, Dict0, App, #request{transport = TPid} = Req) -> - AppDict = App#diameter_app.dictionary, - - incr(recv, Pkt, TPid, AppDict), - - try - incr_result(recv, Pkt, TPid, {Dict, AppDict, Dict0}) %% count incoming - of - _ -> answer(Pkt, SvcName, App, Req) - catch - exit: {no_result_code, _} -> - %% RFC 6733 requires one of Result-Code or - %% Experimental-Result, but the decode will have detected - %% a missing AVP. If both are optional in the dictionary - %% then this isn't a decode error: just continue on. - answer(Pkt, SvcName, App, Req); - exit: {invalid_error_bit, {_, _, _, Avp}} -> - #diameter_packet{errors = Es} - = Pkt, - E = {5004, Avp}, - answer(Pkt#diameter_packet{errors = [E|Es]}, SvcName, App, Req) - end. + DecPkt = errors(Id, diameter_codec:decode({MsgDict, AppDict}, + SvcOpts, + Pkt)), + #request{peer = {TPid, _}} + = Req, -%% answer/4 - -answer(Pkt, - SvcName, - #diameter_app{module = ModX, - options = [{answer_errors, AE} | _]}, - Req) -> - a(Pkt, SvcName, ModX, AE, Req). - --spec a(_, _, _) -> no_return(). %% silence dialyzer - -a(#diameter_packet{errors = Es} - = Pkt, - SvcName, - ModX, - AE, - #request{transport = TPid, - caps = Caps, - packet = P}) - when [] == Es; - callback == AE -> - cb(ModX, handle_answer, [Pkt, msg(P), SvcName, {TPid, Caps}]); - -a(Pkt, SvcName, _, AE, _) -> - a(Pkt#diameter_packet.header, SvcName, AE). - -a(Hdr, SvcName, report) -> + incr(recv, DecPkt, TPid, AppDict), + + AnsPkt = try + incr_result(recv, DecPkt, TPid, {MsgDict, AppDict, Dict0}) + of + _ -> DecPkt + catch + exit: {no_result_code, _} -> + %% RFC 6733 requires one of Result-Code or + %% Experimental-Result, but the decode will have + %% detected a missing AVP. If both are optional in + %% the dictionary then this isn't a decode error: + %% just continue on. + DecPkt; + exit: {invalid_error_bit, {_, _, _, Avp}} -> + #diameter_packet{errors = Es} + = DecPkt, + E = {5004, Avp}, + DecPkt#diameter_packet{errors = [E|Es]} + end, + + handle_answer(AnsPkt, SvcName, App, AE, Req). + +%% handle_answer/5 + +handle_answer(#diameter_packet{errors = Es} + = Pkt, + SvcName, + App, + AE, + #request{peer = {_TPid, _Caps} = TC, + packet = P}) + when callback == AE; + [] == Es -> + cb(App, handle_answer, [Pkt, msg(P), SvcName, TC]); + +handle_answer(#diameter_packet{header = H}, SvcName, _, AE, _) -> + handle_error(H, SvcName, AE). + +%% handle_error/3 + +-spec handle_error(_, _, _) -> no_return(). %% silence dialyzer + +handle_error(Hdr, SvcName, report) -> MFA = {?MODULE, handle_answer, [SvcName, Hdr]}, diameter_lib:warning_report(errors, MFA), - a(Hdr, SvcName, discard); + handle_error(Hdr, SvcName, discard); -a(Hdr, SvcName, discard) -> +handle_error(Hdr, SvcName, discard) -> x({answer_errors, {SvcName, Hdr}}). %% Note that we don't check that the application id in the answer's @@ -1608,16 +1640,38 @@ a(Hdr, SvcName, discard) -> %% timer value is ignored. This means that an answer could be accepted %% from a peer after timeout in the case of failover. -%% retransmit/5 +%% resend_request/4 -retransmit({{_,_,App} = Transport, _, _}, Req, Opts, SvcName, Timeout) -> - try retransmit(Transport, Req, SvcName, Timeout) of - T -> recv_A(Timeout, SvcName, App, Opts, T) - catch - ?FAILURE(Reason) -> {error, Req, Reason} +resend_request({{{TPid, _Caps} = TC, App}, SvcOpts}, + Req0, + #options{timeout = Timeout} + = CallOpts, + SvcName) -> + case + undefined == get(TPid) + andalso prepare_retransmit(TC, App, Req0, SvcName) + of + [ReqPkt | Fs] -> + AppDict = App#diameter_app.dictionary, + EncPkt = encode(AppDict, TPid, SvcOpts, ReqPkt), + eval_packet(EncPkt, Fs), + Req = Req0#request{peer = TC, + packet = ReqPkt}, + ?LOG(retransmission, EncPkt#diameter_packet.header), + incr(TPid, {msg_id(EncPkt, AppDict), send, retransmission}), + {TRef, MRef} = zend_requezt(TPid, EncPkt, Req, SvcName, Timeout), + recv_answer(SvcName, App, CallOpts, {TRef, MRef, Req}); + false -> + {error, Req0, timeout}; + {discard, Reason} -> + {error, Req0, Reason}; + discard -> + {error, Req0, discarded}; + {error, T} -> + ?ERROR({invalid_return, T, prepare_retransmit, App}) end; -retransmit(_, Req, _, _, _) -> %% no alternate peer +resend_request(_, Req, _, _) -> %% no alternate peer {error, Req, failover}. %% pick_peer/4 @@ -1627,8 +1681,8 @@ retransmit(_, Req, _, _, _) -> %% no alternate peer pick_peer(SvcName, App, #request{packet = #diameter_packet{msg = Msg}}, - Opts) -> - pick_peer(SvcName, App, Msg, Opts#options{extra = []}); + CallOpts) -> + pick_peer(SvcName, App, Msg, CallOpts#options{extra = []}); pick_peer(_, _, undefined, _) -> {error, no_connection}; @@ -1636,28 +1690,14 @@ pick_peer(_, _, undefined, _) -> pick_peer(SvcName, AppOrAlias, Msg, - #options{filter = Filter, extra = Xtra}) -> - pick(diameter_service:pick_peer(SvcName, - AppOrAlias, - {fun(D) -> get_destination(D, Msg) end, - Filter, - Xtra})). - -pick(false) -> - {error, no_connection}; - -pick(T) -> - T. - -%% handle_error/4 - -handle_error(App, - #request{packet = Pkt, - transport = TPid, - caps = Caps}, - Reason, - SvcName) -> - cb(App, handle_error, [Reason, msg(Pkt), SvcName, {TPid, Caps}]). + #options{peers = TPids, filter = Filter, extra = Xtra}) -> + X = {fun(D) -> get_destination(D, Msg) end, Filter, Xtra, TPids}, + case diameter_service:pick_peer(SvcName, AppOrAlias, X) of + false -> + {error, no_connection}; + T -> + T + end. msg(#diameter_packet{msg = undefined, bin = Bin}) -> Bin; @@ -1666,27 +1706,20 @@ msg(#diameter_packet{msg = Msg}) -> %% encode/4 -encode(Dict, TPid, Pkt, Fs) -> - P = encode(Dict, TPid, Pkt), - eval_packet(P, Fs), - P. - -%% encode/2 - %% Note that prepare_request can return a diameter_packet containing a %% header or transport_data. Even allow the returned record to contain %% an encoded binary. This isn't the usual case and doesn't properly %% support retransmission but is useful for test. -encode(Dict, TPid, Pkt) +encode(Dict, TPid, Opts, Pkt) when is_atom(Dict) -> - encode({Dict, Dict}, TPid, Pkt); + encode({Dict, Dict}, TPid, Opts, Pkt); %% A message to be encoded. -encode(DictT, TPid, #diameter_packet{bin = undefined} = Pkt) -> +encode(DictT, TPid, Opts, #diameter_packet{bin = undefined} = Pkt) -> {Dict, AppDict} = DictT, try - diameter_codec:encode(Dict, Pkt) + diameter_codec:encode(Dict, Opts, Pkt) catch exit: {diameter_codec, encode, T} = Reason -> incr_error(send, T, TPid, AppDict), @@ -1694,198 +1727,103 @@ encode(DictT, TPid, #diameter_packet{bin = undefined} = Pkt) -> end; %% An encoded binary: just send. -encode(_, _, #diameter_packet{} = Pkt) -> +encode(_, _, _, #diameter_packet{} = Pkt) -> Pkt. +%% zend_requezt/5 +%% +%% Strip potentially large record fields that aren't used by the +%% processes the records can be send to, possibly on a remote node. + +zend_requezt(TPid, Pkt, Req, SvcName, Timeout) -> + put(TPid, Req), + send_request(TPid, z(Pkt), Req, SvcName, Timeout). + %% send_request/5 send_request(TPid, #diameter_packet{bin = Bin} = Pkt, Req, _SvcName, Timeout) when node() == node(TPid) -> Seqs = diameter_codec:sequence_numbers(Bin), TRef = erlang:start_timer(Timeout, self(), TPid), - Entry = {Seqs, Req, TRef}, - - %% Ensure that request table is cleaned even if we receive an exit - %% signal. An alternative would be to simply trap exits, but - %% callbacks are applied in this process, and these could possibly - %% be expecting the prevailing behaviour. - Self = self(), - spawn(fun() -> diameter_lib:wait([Self]), erase_request(Entry) end), - - store_request(Entry, TPid), - send(TPid, Pkt), - TRef; + send(TPid, Pkt, _Route = {self(), Req#request.ref, Seqs}), + {TRef, _MRef = peer_monitor(TPid, TRef)}; %% Send using a remote transport: spawn a process on the remote node %% to relay the answer. send_request(TPid, #diameter_packet{} = Pkt, Req, SvcName, Timeout) -> TRef = erlang:start_timer(Timeout, self(), TPid), - T = {TPid, Pkt, Req, SvcName, Timeout, TRef}, + T = {TPid, Pkt, z(Req), SvcName, Timeout, TRef}, spawn(node(TPid), ?MODULE, send, [T]), - TRef. + {TRef, false}. + +%% z/1 +%% +%% Avoid sending potentially large terms unnecessarily. The records +%% themselves are retained since they're sent between nodes in send/1 +%% and changing what's sent causes upgrade issues. + +z(#request{ref = Ref, handler = Pid}) -> + #request{ref = Ref, + handler = Pid}; + +z(#diameter_packet{header = H, bin = Bin, transport_data = T}) -> + #diameter_packet{header = H, + bin = Bin, + transport_data = T}. %% send/1 send({TPid, Pkt, #request{handler = Pid} = Req0, SvcName, Timeout, TRef}) -> Req = Req0#request{handler = self()}, - recv(TPid, Pid, TRef, send_request(TPid, Pkt, Req, SvcName, Timeout)). + recv(TPid, Pid, TRef, zend_requezt(TPid, Pkt, Req, SvcName, Timeout)). %% recv/4 %% %% Relay an answer from a remote node. -recv(TPid, Pid, TRef, LocalTRef) -> +recv(TPid, Pid, TRef, {LocalTRef, MRef}) -> receive {answer, _, _, _, _} = A -> Pid ! A; + {'DOWN', MRef, process, _, _} -> + Pid ! {failover, TRef}; {failover = T, LocalTRef} -> Pid ! {T, TRef}; T -> exit({timeout, LocalTRef, TPid} = T) end. -%% send/2 +%% send/3 -send(Pid, Pkt) -> %% Strip potentially large message terms. - #diameter_packet{header = H, - bin = Bin, - transport_data = T} - = Pkt, - Pid ! {send, #diameter_packet{header = H, - bin = Bin, - transport_data = T}}. - -%% retransmit/4 - -retransmit({TPid, Caps, App} - = Transport, - #request{packet = Pkt0} - = Req, - SvcName, - Timeout) -> - have_request(Pkt0, TPid) %% Don't failover to a peer we've - andalso ?THROW(timeout), %% already sent to. - - Pkt = make_retransmit_packet(Pkt0), - - retransmit(cb(App, prepare_retransmit, [Pkt, SvcName, {TPid, Caps}]), - Transport, - Req#request{packet = Pkt}, - SvcName, - Timeout, - []). +send(Pid, Pkt, Route) -> + Pid ! {send, Pkt, Route}. -retransmit({send, Msg}, - Transport, - #request{packet = Pkt} - = Req, - SvcName, - Timeout, - Fs) -> - resend_request(make_request_packet(Msg, Pkt), - Transport, - Req, - SvcName, - Timeout, - Fs); +%% prepare_retransmit/4 -retransmit({discard, Reason}, _, _, _, _, _) -> - ?THROW(Reason); +prepare_retransmit({_TPid, _Caps} = TC, App, Req, SvcName) -> + Pkt = make_retransmit_packet(Req#request.packet), -retransmit(discard, _, _, _, _, _) -> - ?THROW(discarded); + case prepare(cb(App, prepare_retransmit, [Pkt, SvcName, TC]), []) of + [Msg | Fs] -> + [make_request_packet(Msg, Pkt) | Fs]; + No -> + No + end. -retransmit({eval_packet, RC, F}, Transport, Req, SvcName, Timeout, Fs) -> - retransmit(RC, Transport, Req, SvcName, Timeout, [F|Fs]); +%% When sending a binary, it's up to prepare_retransmit to modify it +%% accordingly. -retransmit(T, {_, _, App}, _, _, _, _) -> - ?ERROR({invalid_return, T, prepare_retransmit, App}). +%% peer_monitor/2 -resend_request(Pkt0, - {TPid, Caps, #diameter_app{dictionary = AppDict}}, - Req0, - SvcName, - Tmo, - Fs) -> - Pkt = encode(AppDict, TPid, Pkt0, Fs), - - Req = Req0#request{transport = TPid, - packet = Pkt0, - caps = Caps}, - - ?LOG(retransmission, Pkt#diameter_packet.header), - incr(TPid, {msg_id(Pkt, AppDict), send, retransmission}), - TRef = send_request(TPid, Pkt, Req, SvcName, Tmo), - {TRef, Req}. - -%% store_request/2 - -store_request(T, TPid) -> - ets:insert(?REQUEST_TABLE, T), - ets:member(?REQUEST_TABLE, TPid) - orelse begin - {_Seqs, _Req, TRef} = T, - self() ! {failover, TRef} %% failover/1 may have missed - end. - -%% lookup_request/2 -%% -%% Note the match on both the key and transport pid. The latter is -%% necessary since the same Hop-by-Hop and End-to-End identifiers are -%% reused in the case of retransmission. - -lookup_request(Msg, TPid) -> - Seqs = diameter_codec:sequence_numbers(Msg), - Spec = [{{Seqs, #request{transport = TPid, _ = '_'}, '_'}, - [], - ['$_']}], - case ets:select(?REQUEST_TABLE, Spec) of - [{_, Req, _}] -> - Req; - [] -> +peer_monitor(TPid, TRef) -> + case ets:lookup(?REQUEST_TABLE, TPid) of %% at peer_up/1 + [{_, MPid}] -> + monitor(process, MPid); + [] -> %% transport has gone down + self() ! {failover, TRef}, false end. -%% erase_request/1 - -erase_request(T) -> - ets:delete_object(?REQUEST_TABLE, T). - -%% match_requests/1 - -match_requests(TPid) -> - Pat = {'_', #request{transport = TPid, _ = '_'}, '_'}, - ets:select(?REQUEST_TABLE, [{Pat, [], ['$_']}]). - -%% have_request/2 - -have_request(Pkt, TPid) -> - Seqs = diameter_codec:sequence_numbers(Pkt), - Pat = {Seqs, #request{transport = TPid, _ = '_'}, '_'}, - '$end_of_table' /= ets:select(?REQUEST_TABLE, [{Pat, [], ['$_']}], 1). - -%% --------------------------------------------------------------------------- -%% # failover/1-2 -%% --------------------------------------------------------------------------- - -failover(TPid) - when is_pid(TPid) -> - lists:foreach(fun failover/1, match_requests(TPid)); -%% Note that a request process can store its request after failover -%% notifications are sent here: store_request/2 sends the notification -%% in that case. - -%% Failover as a consequence of peer_down/1: inform the -%% request process. -failover({_, Req, TRef}) -> - #request{handler = Pid, - packet = #diameter_packet{msg = M}} - = Req, - M /= undefined andalso (Pid ! {failover, TRef}). -%% Failover is not performed when msg = binary() since sending -%% pre-encoded binaries is only partially supported. (Mostly for -%% test.) - %% get_destination/2 get_destination(Dict, Msg) -> @@ -1974,7 +1912,7 @@ ungroup(Avp) -> avp_decode(Dict, Name, #diameter_avp{value = undefined, data = Bin} = Avp) -> - try Dict:avp(decode, Bin, Name) of + try Dict:avp(decode, Bin, Name, decode_opts(Dict)) of V -> Avp#diameter_avp{value = V} catch @@ -1985,8 +1923,6 @@ avp_decode(_, _, #diameter_avp{} = Avp) -> Avp. cb(#diameter_app{module = [_|_] = M}, F, A) -> - eval(M, F, A); -cb([_|_] = M, F, A) -> eval(M, F, A). eval([M|X], F, A) -> @@ -1994,3 +1930,10 @@ eval([M|X], F, A) -> choose(true, X, _) -> X; choose(false, _, X) -> X. + +%% Decode options sufficient for AVP extraction. +decode_opts(Dict) -> + #{string_decode => false, + strict_mbit => false, + failed_avp => false, + dictionary => Dict}. diff --git a/lib/diameter/src/base/diameter_types.erl b/lib/diameter/src/base/diameter_types.erl index 6ecf385239..86b674dd48 100644 --- a/lib/diameter/src/base/diameter_types.erl +++ b/lib/diameter/src/base/diameter_types.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -26,32 +26,16 @@ %% %% Basic types. --export(['OctetString'/2, - 'Integer32'/2, - 'Integer64'/2, - 'Unsigned32'/2, - 'Unsigned64'/2, - 'Float32'/2, - 'Float64'/2]). - -%% Derived types. --export(['Address'/2, - 'Time'/2, - 'UTF8String'/2, - 'DiameterIdentity'/2, - 'DiameterURI'/2, - 'IPFilterRule'/2, - 'QoSFilterRule'/2]). - -%% Functions taking the AVP name in question as second parameter. -export(['OctetString'/3, 'Integer32'/3, 'Integer64'/3, 'Unsigned32'/3, 'Unsigned64'/3, 'Float32'/3, - 'Float64'/3, - 'Address'/3, + 'Float64'/3]). + +%% Derived types. +-export(['Address'/3, 'Time'/3, 'UTF8String'/3, 'DiameterIdentity'/3, @@ -89,81 +73,80 @@ %% AVP Data Format is needed, a new version of this RFC must be created. %% -------------------- -'OctetString'(decode, Bin) +'OctetString'(decode, Bin, #{string_decode := true}) when is_binary(Bin) -> - case diameter_codec:getopt(string_decode) of - true -> - binary_to_list(Bin); - false -> - Bin - end; - -'OctetString'(decode, B) -> + binary_to_list(Bin); + +'OctetString'(decode, Bin, _) + when is_binary(Bin) -> + Bin; + +'OctetString'(decode, B, _) -> ?INVALID_LENGTH(B); -'OctetString'(encode = M, zero) -> - 'OctetString'(M, []); +'OctetString'(encode, zero, _) -> + <<>>; -'OctetString'(encode, Str) -> +'OctetString'(encode, Str, _) -> iolist_to_binary(Str). %% -------------------- -'Integer32'(decode, <<X:32/signed>>) -> +'Integer32'(decode, <<X:32/signed>>, _) -> X; -'Integer32'(decode, B) -> +'Integer32'(decode, B, _) -> ?INVALID_LENGTH(B); -'Integer32'(encode = M, zero) -> - 'Integer32'(M, 0); +'Integer32'(encode, zero, _) -> + <<0:32/signed>>; -'Integer32'(encode, I) +'Integer32'(encode, I, _) when ?SINT(32,I) -> <<I:32/signed>>. %% -------------------- -'Integer64'(decode, <<X:64/signed>>) -> +'Integer64'(decode, <<X:64/signed>>, _) -> X; -'Integer64'(decode, B) -> +'Integer64'(decode, B, _) -> ?INVALID_LENGTH(B); -'Integer64'(encode = M, zero) -> - 'Integer64'(M, 0); +'Integer64'(encode, zero, _) -> + <<0:64/signed>>; -'Integer64'(encode, I) +'Integer64'(encode, I, _) when ?SINT(64,I) -> <<I:64/signed>>. %% -------------------- -'Unsigned32'(decode, <<X:32>>) -> +'Unsigned32'(decode, <<X:32>>, _) -> X; -'Unsigned32'(decode, B) -> +'Unsigned32'(decode, B, _) -> ?INVALID_LENGTH(B); -'Unsigned32'(encode = M, zero) -> - 'Unsigned32'(M, 0); +'Unsigned32'(encode, zero, _) -> + <<0:32>>; -'Unsigned32'(encode, I) +'Unsigned32'(encode, I, _) when ?UINT(32,I) -> <<I:32>>. %% -------------------- -'Unsigned64'(decode, <<X:64>>) -> +'Unsigned64'(decode, <<X:64>>, _) -> X; -'Unsigned64'(decode, B) -> +'Unsigned64'(decode, B, _) -> ?INVALID_LENGTH(B); -'Unsigned64'(encode = M, zero) -> - 'Unsigned64'(M, 0); +'Unsigned64'(encode, zero, _) -> + <<0:64>>; -'Unsigned64'(encode, I) +'Unsigned64'(encode, I, _) when ?UINT(64,I) -> <<I:64>>. @@ -184,25 +167,25 @@ %% arithmetic is performed on the decoded value. Better to be explicit %% that precision has been lost. -'Float32'(decode, <<S:1, 255:8, _:23>>) -> +'Float32'(decode, <<S:1, 255:8, _:23>>, _) -> choose(S, infinity, '-infinity'); -'Float32'(decode, <<X:32/float>>) -> +'Float32'(decode, <<X:32/float>>, _) -> X; -'Float32'(decode, B) -> +'Float32'(decode, B, _) -> ?INVALID_LENGTH(B); -'Float32'(encode = M, zero) -> - 'Float32'(M, 0.0); +'Float32'(encode, zero, _) -> + <<0.0:32/float>>; -'Float32'(encode, infinity) -> +'Float32'(encode, infinity, _) -> <<0:1, 255:8, 0:23>>; -'Float32'(encode, '-infinity') -> +'Float32'(encode, '-infinity', _) -> <<1:1, 255:8, 0:23>>; -'Float32'(encode, X) +'Float32'(encode, X, _) when is_float(X) -> <<X:32/float>>. %% Note that this could also encode infinity/-infinity for large @@ -222,25 +205,25 @@ %% The 64 bit format is entirely analogous to the 32 bit format. -'Float64'(decode, <<S:1, 2047:11, _:52>>) -> +'Float64'(decode, <<S:1, 2047:11, _:52>>, _) -> choose(S, infinity, '-infinity'); -'Float64'(decode, <<X:64/float>>) -> +'Float64'(decode, <<X:64/float>>, _) -> X; -'Float64'(decode, B) -> +'Float64'(decode, B, _) -> ?INVALID_LENGTH(B); -'Float64'(encode, infinity) -> +'Float64'(encode, infinity, _) -> <<0:1, 2047:11, 0:52>>; -'Float64'(encode, '-infinity') -> +'Float64'(encode, '-infinity', _) -> <<1:1, 2047:11, 0:52>>; -'Float64'(encode = M, zero) -> - 'Float64'(M, 0.0); +'Float64'(encode, zero, _) -> + <<0.0:64/float>>; -'Float64'(encode, X) +'Float64'(encode, X, _) when is_float(X) -> <<X:64/float>>. @@ -256,18 +239,18 @@ %% format. %% -------------------- -'Address'(encode, zero) -> +'Address'(encode, zero, _) -> <<0:48>>; -'Address'(decode, <<A:16, B/binary>>) +'Address'(decode, <<A:16, B/binary>>, _) when 1 == A, 4 == size(B); 2 == A, 16 == size(B) -> list_to_tuple([N || <<N:A/unit:8>> <= B]); -'Address'(decode, B) -> +'Address'(decode, B, _) -> ?INVALID_LENGTH(B); -'Address'(encode, T) -> +'Address'(encode, T, _) -> Ns = tuple_to_list(diameter_lib:ipaddr(T)), %% length 4 or 8 A = length(Ns) div 4, %% 1 or 2 B = << <<N:A/unit:8>> || N <- Ns >>, @@ -278,36 +261,38 @@ %% A DiameterIdentity is a FQDN as definined in RFC 1035, which is at %% least one character. -'DiameterIdentity'(encode = M, zero) -> - 'OctetString'(M, [0]); +'DiameterIdentity'(encode, zero, _) -> + <<0>>; -'DiameterIdentity'(encode = M, X) -> - <<_,_/binary>> = 'OctetString'(M, X); +'DiameterIdentity'(encode = M, X, Opts) -> + <<_,_/binary>> = 'OctetString'(M, X, Opts); -'DiameterIdentity'(decode = M, <<_,_/binary>> = X) -> - 'OctetString'(M, X); +'DiameterIdentity'(decode = M, <<_,_/binary>> = X, Opts) -> + 'OctetString'(M, X, Opts); -'DiameterIdentity'(decode, X) -> +'DiameterIdentity'(decode, X, _) -> ?INVALID_LENGTH(X). %% -------------------- -'DiameterURI'(decode, Bin) +'DiameterURI'(decode, Bin, Opts) when is_binary(Bin) -> - scan_uri(Bin); + scan_uri(Bin, Opts); -'DiameterURI'(decode, B) -> +'DiameterURI'(decode, B, _) -> ?INVALID_LENGTH(B); %% The minimal DiameterURI is "aaa://x", 7 characters. -'DiameterURI'(encode = M, zero) -> - 'OctetString'(M, lists:duplicate(0,7)); - -'DiameterURI'(encode, #diameter_uri{type = Type, - fqdn = DN, - port = PN, - transport = T, - protocol = P}) +'DiameterURI'(encode, zero, _) -> + <<0:7/unit:8>>; + +'DiameterURI'(encode, + #diameter_uri{type = Type, + fqdn = DN, + port = PN, + transport = T, + protocol = P}, + _) when (Type == 'aaa' orelse Type == 'aaas'), is_integer(PN), 0 =< PN, @@ -324,48 +309,47 @@ %% defaults, so it's best to be explicit. Interpret defaults on decode %% since there's no choice. -'DiameterURI'(encode, Str) -> +'DiameterURI'(encode, Str, Opts) -> Bin = iolist_to_binary(Str), - #diameter_uri{} = scan_uri(Bin), %% assert + #diameter_uri{} = scan_uri(Bin, Opts), %% assert Bin. %% -------------------- %% This minimal rule is "deny in 0 from 0.0.0.0 to 0.0.0.0", 33 characters. -'IPFilterRule'(encode = M, zero) -> - 'OctetString'(M, lists:duplicate(0,33)); +'IPFilterRule'(encode, zero, _) -> + <<0:33/unit:8>>; -'IPFilterRule'(M, X) -> - 'OctetString'(M, X). +'IPFilterRule'(M, X, Opts) -> + 'OctetString'(M, X, Opts). %% -------------------- %% This minimal rule is the same as for an IPFilterRule. -'QoSFilterRule'(encode = M, zero = X) -> - 'IPFilterRule'(M, X); +'QoSFilterRule'(encode, zero, _) -> + <<0:33/unit:8>>; -'QoSFilterRule'(M, X) -> - 'OctetString'(M, X). +'QoSFilterRule'(M, X, Opts) -> + 'OctetString'(M, X, Opts). %% -------------------- -'UTF8String'(decode, Bin) +'UTF8String'(decode, Bin, #{string_decode := true}) when is_binary(Bin) -> - case diameter_codec:getopt(string_decode) of - true -> - %% assert list return - tl([0|_] = unicode:characters_to_list([0, Bin])); - false -> - <<_/binary>> = unicode:characters_to_binary(Bin) - end; - -'UTF8String'(decode, B) -> + %% assert list return + tl([0|_] = unicode:characters_to_list([0, Bin])); + +'UTF8String'(decode, Bin, _) + when is_binary(Bin) -> + <<_/binary>> = unicode:characters_to_binary(Bin); + +'UTF8String'(decode, B, _) -> ?INVALID_LENGTH(B); -'UTF8String'(encode = M, zero) -> - 'UTF8String'(M, []); +'UTF8String'(encode, zero, _) -> + <<>>; -'UTF8String'(encode, S) -> +'UTF8String'(encode, S, _) -> <<_/binary>> = unicode:characters_to_binary(S). %% assert binary return %% -------------------- @@ -414,67 +398,23 @@ -define(TIME_MIN, {{1968,1,20},{3,14,8}}). %% TIME_1900 + 1 bsl 31 -define(TIME_MAX, {{2104,2,26},{9,42,24}}). %% TIME_2036 + 1 bsl 31 -'Time'(decode, <<Time:32>>) -> +'Time'(decode, <<Time:32>>, _) -> Offset = msb(1 == Time bsr 31), calendar:gregorian_seconds_to_datetime(Time + Offset); -'Time'(decode, B) -> +'Time'(decode, B, _) -> ?INVALID_LENGTH(B); -'Time'(encode, {{_Y,_M,_D},{_HH,_MM,_SS}} = Datetime) +'Time'(encode, {{_Y,_M,_D},{_HH,_MM,_SS}} = Datetime, _) when ?TIME_MIN =< Datetime, Datetime < ?TIME_MAX -> S = calendar:datetime_to_gregorian_seconds(Datetime), T = S - msb(S < ?TIME_2036), 0 = T bsr 32, %% sanity check <<T:32>>; -'Time'(encode, zero) -> +'Time'(encode, zero, _) -> <<0:32>>. -%% ------------------------------------------------------------------------- - -'OctetString'(M, _, Data) -> - 'OctetString'(M, Data). - -'Integer32'(M, _, Data) -> - 'Integer32'(M, Data). - -'Integer64'(M, _, Data) -> - 'Integer64'(M, Data). - -'Unsigned32'(M, _, Data) -> - 'Unsigned32'(M, Data). - -'Unsigned64'(M, _, Data) -> - 'Unsigned64'(M, Data). - -'Float32'(M, _, Data) -> - 'Float32'(M, Data). - -'Float64'(M, _, Data) -> - 'Float64'(M, Data). - -'Address'(M, _, Data) -> - 'Address'(M, Data). - -'Time'(M, _, Data) -> - 'Time'(M, Data). - -'UTF8String'(M, _, Data) -> - 'UTF8String'(M, Data). - -'DiameterIdentity'(M, _, Data) -> - 'DiameterIdentity'(M, Data). - -'DiameterURI'(M, _, Data) -> - 'DiameterURI'(M, Data). - -'IPFilterRule'(M, _, Data) -> - 'IPFilterRule'(M, Data). - -'QoSFilterRule'(M, _, Data) -> - 'QoSFilterRule'(M, Data). - %% =========================================================================== %% =========================================================================== @@ -564,7 +504,7 @@ msb(false) -> ?TIME_2036. %% %% aaa-protocol = ( "diameter" / "radius" / "tacacs+" ) -scan_uri(Bin) -> +scan_uri(Bin, Opts) -> RE = "^(aaas?)://" "([-a-zA-Z0-9.]{1,255})" "(:0{0,5}([0-9]{1,5}))?" @@ -583,28 +523,30 @@ scan_uri(Bin) -> RE, [{capture, [1,2,4,6,8], binary}]), Type = to_atom(A), - {PN0, T0} = defaults(diameter_codec:getopt(rfc), Type), - PortNr = to_int(PN, PN0), - 0 = PortNr bsr 16, %% assert #diameter_uri{type = Type, - fqdn = 'OctetString'(decode, DN), - port = PortNr, - transport = to_atom(T, T0), + fqdn = 'OctetString'(decode, DN, Opts), + port = portnr(PN, Type, Opts), + transport = transport(T, Opts), protocol = to_atom(P, diameter)}. %% Choose defaults based on the RFC, since 6733 has changed them. -defaults(3588, _) -> - {3868, sctp}; -defaults(6733, aaa) -> - {3868, tcp}; -defaults(6733, aaas) -> - {5658, tcp}. - -to_int(<<>>, N) -> - N; -to_int(B, _) -> + +portnr(<<>>, aaa, #{rfc := 6733}) -> + 3868; +portnr(<<>>, aaas, #{rfc := 6733}) -> + 5868; +portnr(<<>>, _, #{rfc := 3588}) -> + 3868; +portnr(B, _, _) -> binary_to_integer(B). +transport(<<>>, #{rfc := 6733}) -> + tcp; +transport(<<>>, #{rfc := 3588}) -> + sctp; +transport(B, _) -> + to_atom(B). + to_atom(<<>>, A) -> A; to_atom(B, _) -> diff --git a/lib/diameter/src/base/diameter_watchdog.erl b/lib/diameter/src/base/diameter_watchdog.erl index 2ba60a65fb..a63425d92a 100644 --- a/lib/diameter/src/base/diameter_watchdog.erl +++ b/lib/diameter/src/base/diameter_watchdog.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -50,10 +50,6 @@ -define(IS_NATURAL(N), (is_integer(N) andalso 0 =< N)). --record(config, - {suspect = 1 :: non_neg_integer(), %% OKAY -> SUSPECT - okay = 3 :: non_neg_integer()}). %% REOPEN -> OKAY - -record(watchdog, {%% PCB - Peer Control Block; see RFC 3539, Appendix A status = initial :: initial | okay | suspect | down | reopen, @@ -70,12 +66,19 @@ | integer() %% monotonic time | undefined, dictionary :: module(), %% common dictionary - receive_data :: term(), - %% term passed into diameter_service with incoming message - sequence :: diameter:sequence(), %% mask - restrict :: {diameter:restriction(), boolean()}, - shutdown = false :: boolean(), - config :: #config{}}). + receive_data :: term(), %% term passed with incoming message + config :: #{sequence := diameter:sequence(), %% mask + restrict_connections := diameter:restriction(), + restrict := boolean(), + suspect := non_neg_integer(), %% OKAY -> SUSPECT + okay := non_neg_integer()}, %% REOPEN -> OKAY + codec :: #{string_decode := false, + strict_mbit := boolean(), + failed_avp := false, + rfc := 3588 | 6733, + ordered_encode := false, + incoming_maxlen := diameter:message_length()}, + shutdown = false :: boolean()}). %% --------------------------------------------------------------------------- %% start/2 @@ -85,12 +88,12 @@ %% reason. %% --------------------------------------------------------------------------- --spec start(Type, {RecvData, [Opt], SvcOpts, #diameter_service{}}) +-spec start(Type, {[Opt], SvcOpts, RecvData, #diameter_service{}}) -> {reference(), pid()} when Type :: {connect|accept, diameter:transport_ref()}, - RecvData :: term(), Opt :: diameter:transport_opt(), - SvcOpts :: [diameter:service_opt()]. + SvcOpts :: map(), + RecvData :: term(). start({_,_} = Type, T) -> Ack = make_ref(), @@ -117,22 +120,28 @@ init(T) -> proc_lib:init_ack({ok, self()}), gen_server:enter_loop(?MODULE, [], i(T)). -i({Ack, T, Pid, {RecvData, - Opts, - SvcOpts, +i({Ack, T, Pid, {Opts, + #{restrict_connections := Restrict} + = SvcOpts0, + RecvData, #diameter_service{applications = Apps, capabilities = Caps} = Svc}}) -> monitor(process, Pid), wait(Ack, Pid), + + Dict0 = common_dictionary(Apps), + SvcOpts = SvcOpts0#{rfc => rfc(Dict0)}, putr(restart, {T, Opts, Svc, SvcOpts}), %% save seeing it in trace putr(dwr, dwr(Caps)), %% - {_,_} = Mask = proplists:get_value(sequence, SvcOpts), - Restrict = proplists:get_value(restrict_connections, SvcOpts), Nodes = restrict_nodes(Restrict), - Dict0 = common_dictionary(Apps), - diameter_codec:setopts([{common_dictionary, Dict0}, - {string_decode, false}]), + CodecKeys = [string_decode, + strict_mbit, + incoming_maxlen, + spawn_opt, + rfc, + ordered_encode], + #watchdog{parent = Pid, transport = start(T, Opts, SvcOpts, Nodes, Dict0, Svc), tw = proplists:get_value(watchdog_timer, @@ -140,9 +149,14 @@ i({Ack, T, Pid, {RecvData, ?DEFAULT_TW_INIT), receive_data = RecvData, dictionary = Dict0, - sequence = Mask, - restrict = {Restrict, lists:member(node(), Nodes)}, - config = config(Opts)}. + config = + maps:without(CodecKeys, + config(SvcOpts#{restrict => restrict(Nodes), + suspect => 1, + okay => 3}, + Opts)), + codec = maps:with(CodecKeys, SvcOpts#{string_decode := false, + ordered_encode => false})}. wait(Ref, Pid) -> receive @@ -152,22 +166,31 @@ wait(Ref, Pid) -> exit({shutdown, D}) end. -%% config/1 +%% Regard anything but the generated RFC 3588 dictionary as modern. +%% This affects the interpretation of defaults during the decode +%% of values of type DiameterURI, this having changed from RFC 3588. +%% (So much for backwards compatibility.) +rfc(?BASE) -> + 3588; +rfc(_) -> + 6733. + +%% config/2 %% %% Could also configure counts for SUSPECT to DOWN and REOPEN to DOWN, %% but don't. -config(Opts) -> +config(Map, Opts) -> Config = proplists:get_value(watchdog_config, Opts, []), - lists:foldl(fun config/2, #config{}, Config). + lists:foldl(fun cfg/2, Map, Config). -config({suspect, N}, Rec) +cfg({suspect, N}, Map) when ?IS_NATURAL(N) -> - Rec#config{suspect = N}; + Map#{suspect := N}; -config({okay, N}, Rec) +cfg({okay, N}, Map) when ?IS_NATURAL(N) -> - Rec#config{okay = N}. + Map#{okay := N}. %% start/6 @@ -283,7 +306,7 @@ event(Msg, ?LOG(transition, {From, To}). data(Msg, TPid, reopen, okay) -> - {recv, TPid, 'DWA', _Pkt} = Msg, %% assert + {recv, TPid, _, 'DWA', _Pkt} = Msg, %% assert {TPid, T} = eraser(open), [T]; @@ -302,6 +325,8 @@ tpid(_, Pid) tpid(Pid, _) -> Pid. +%% send/2 + send(Pid, T) -> Pid ! T. @@ -375,8 +400,8 @@ transition({accepted = T, TPid}, #watchdog{transport = TPid, transition({open, TPid, Hosts, _} = Open, #watchdog{transport = TPid, status = initial, - restrict = {_,R}, - config = #config{suspect = OS}} + config = #{restrict := R, + suspect := OS}} = S) -> case okay(role(), Hosts, R) of okay -> @@ -394,8 +419,8 @@ transition({open, TPid, Hosts, _} = Open, transition({open = Key, TPid, _Hosts, T}, #watchdog{transport = TPid, status = down, - config = #config{suspect = OS, - okay = RO}} + config = #{suspect := OS, + okay := RO}} = S) -> case RO of 0 -> %% non-standard: skip REOPEN @@ -428,7 +453,7 @@ transition({'DOWN', _, process, TPid, _Reason}, transition({'DOWN', _, process, TPid, _Reason} = D, #watchdog{transport = TPid, status = T, - restrict = {_,R}} + config = #{restrict := R}} = S0) -> S = S0#watchdog{pending = false, transport = undefined}, @@ -447,12 +472,15 @@ transition({'DOWN', _, process, TPid, _Reason} = D, end; %% Incoming message. -transition({recv, TPid, Name, PktT}, #watchdog{transport = TPid} = S) -> - try - incoming(Name, PktT, S) - catch +transition({recv, TPid, Route, Name, Pkt}, + #watchdog{transport = TPid} + = S) -> + try incoming(Route, Name, Pkt, S) of #watchdog{dictionary = Dict0, receive_data = T} = NS -> - diameter_traffic:receive_message(TPid, PktT, Dict0, T), + diameter_traffic:receive_message(TPid, Route, Pkt, Dict0, T), + NS + catch + #watchdog{} = NS -> NS end; @@ -481,9 +509,9 @@ getr(Key) -> eraser(Key) -> erase({?MODULE, Key}). -%% encode/3 +%% encode/4 -encode(dwr = M, Dict0, Mask) -> +encode(dwr = M, Dict0, Opts, Mask) -> Msg = getr(M), Seq = diameter_session:sequence(Mask), Hdr = #diameter_header{version = ?DIAMETER_VERSION, @@ -491,10 +519,10 @@ encode(dwr = M, Dict0, Mask) -> hop_by_hop_id = Seq}, Pkt = #diameter_packet{header = Hdr, msg = Msg}, - diameter_codec:encode(Dict0, Pkt); + diameter_codec:encode(Dict0, Opts, Pkt); -encode(dwa, Dict0, #diameter_packet{header = H, transport_data = TD} - = ReqPkt) -> +encode(dwa, Dict0, Opts, #diameter_packet{header = H, transport_data = TD} + = ReqPkt) -> AnsPkt = #diameter_packet{header = H#diameter_header{is_request = false, is_error = undefined, @@ -502,7 +530,7 @@ encode(dwa, Dict0, #diameter_packet{header = H, transport_data = TD} msg = dwa(ReqPkt), transport_data = TD}, - diameter_codec:encode(Dict0, AnsPkt). + diameter_codec:encode(Dict0, Opts, AnsPkt). %% okay/3 @@ -572,9 +600,10 @@ tw({M,F,A}) -> send_watchdog(#watchdog{pending = false, transport = TPid, dictionary = Dict0, - sequence = Mask} + config = #{sequence := Mask}, + codec = Opts} = S) -> - #diameter_packet{bin = Bin} = EPkt = encode(dwr, Dict0, Mask), + #diameter_packet{bin = Bin} = EPkt = encode(dwr, Dict0, Opts, Mask), diameter_traffic:incr(send, EPkt, TPid, Dict0), send(TPid, {send, Bin}), ?LOG(send, 'DWR'), @@ -582,41 +611,32 @@ send_watchdog(#watchdog{pending = false, %% Don't count encode errors since we don't expect any on DWR/DWA. -%% incoming/3 - -incoming(Name, {Pkt, NPid}, S) -> - NS = recv(Name, Pkt, S), - NPid ! {diameter, discard}, - NS; +%% incoming/4 -incoming(Name, Pkt, S) -> - recv(Name, Pkt, S). - -%% recv/3 - -recv(Name, Pkt, S) -> - try rcv(Name, Pkt, rcv(Name, S)) of - #watchdog{} = NS -> - throw(NS) +incoming(Route, Name, Pkt, S) -> + try rcv(Name, S) of + NS -> rcv(Name, Pkt, NS) catch - #watchdog{} = NS -> %% throwaway - NS + #watchdog{transport = TPid} = NS when Route -> %% incoming request + send(TPid, {send, false}), %% requiring ack + throw(NS) end. %% rcv/3 rcv('DWR', Pkt, #watchdog{transport = TPid, - dictionary = Dict0} + dictionary = Dict0, + codec = Opts} = S) -> ?LOG(recv, 'DWR'), - DPkt = diameter_codec:decode(Dict0, Pkt), + DPkt = diameter_codec:decode(Dict0, Opts, Pkt), diameter_traffic:incr(recv, DPkt, TPid, Dict0), diameter_traffic:incr_error(recv, DPkt, TPid, Dict0), #diameter_packet{header = H, transport_data = T, bin = Bin} = EPkt - = encode(dwa, Dict0, Pkt), + = encode(dwa, Dict0, Opts, Pkt), diameter_traffic:incr(send, EPkt, TPid, Dict0), diameter_traffic:incr_rc(send, EPkt, TPid, Dict0), @@ -628,12 +648,13 @@ rcv('DWR', Pkt, #watchdog{transport = TPid, throw(S); rcv('DWA', Pkt, #watchdog{transport = TPid, - dictionary = Dict0} + dictionary = Dict0, + codec = Opts} = S) -> ?LOG(recv, 'DWA'), diameter_traffic:incr(recv, Pkt, TPid, Dict0), diameter_traffic:incr_rc(recv, - diameter_codec:decode(Dict0, Pkt), + diameter_codec:decode(Dict0, Opts, Pkt), TPid, Dict0), throw(S); @@ -695,12 +716,12 @@ rcv(_, #watchdog{status = okay} = S) -> %% SUSPECT Receive non-DWA Failback() %% SetWatchdog() OKAY -rcv('DWA', #watchdog{status = suspect, config = #config{suspect = OS}} = S) -> +rcv('DWA', #watchdog{status = suspect, config = #{suspect := OS}} = S) -> set_watchdog(S#watchdog{status = okay, num_dwa = OS, pending = false}); -rcv(_, #watchdog{status = suspect, config = #config{suspect = OS}} = S) -> +rcv(_, #watchdog{status = suspect, config = #{suspect := OS}} = S) -> set_watchdog(S#watchdog{status = okay, num_dwa = OS}); @@ -710,8 +731,8 @@ rcv(_, #watchdog{status = suspect, config = #config{suspect = OS}} = S) -> rcv('DWA', #watchdog{status = reopen, num_dwa = N, - config = #config{suspect = OS, - okay = RO}} + config = #{suspect := OS, + okay := RO}} = S) when N+1 == RO -> S#watchdog{status = okay, @@ -842,18 +863,19 @@ restart(S) -> %% reconnect has won race with timeout restart({{connect, _} = T, Opts, Svc, SvcOpts}, #watchdog{parent = Pid, - restrict = {R,_}, + config = #{restrict_connections := R} + = M, dictionary = Dict0} = S) -> send(Pid, {reconnect, self()}), Nodes = restrict_nodes(R), S#watchdog{transport = start(T, Opts, SvcOpts, Nodes, Dict0, Svc), - restrict = {R, lists:member(node(), Nodes)}}; + config = M#{restrict => restrict(Nodes)}}; %% No restriction on the number of connections to the same peer: just %% die. Note that a state machine never enters state REOPEN in this %% case. -restart({{accept, _}, _, _, _}, #watchdog{restrict = {_, false}}) -> +restart({{accept, _}, _, _, _}, #watchdog{config = #{restrict := false}}) -> stop; %% Otherwise hang around until told to die, either by the service or @@ -897,3 +919,8 @@ restrict_nodes(Nodes) restrict_nodes(F) -> diameter_lib:eval(F). + +%% restrict/1 + +restrict(Nodes) -> + lists:member(node(), Nodes). diff --git a/lib/diameter/src/compiler/diameter_codegen.erl b/lib/diameter/src/compiler/diameter_codegen.erl index cdaa9aa7f9..f56e4a5249 100644 --- a/lib/diameter/src/compiler/diameter_codegen.erl +++ b/lib/diameter/src/compiler/diameter_codegen.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -150,20 +150,21 @@ erl_forms(Mod, ParseD) -> {id, 0}, {vendor_id, 0}, {vendor_name, 0}, - {decode_avps, 2}, %% in diameter_gen.hrl - {encode_avps, 2}, %% + {decode_avps, 3}, %% in diameter_gen.hrl + {encode_avps, 3}, %% + {grouped_avp, 4}, %% {msg_name, 2}, {msg_header, 1}, {rec2msg, 1}, {msg2rec, 1}, {name2rec, 1}, {avp_name, 2}, + {avp_arity, 1}, {avp_arity, 2}, {avp_header, 1}, - {avp, 3}, - {grouped_avp, 3}, + {avp, 4}, {enumerated_avp, 3}, - {empty_value, 1}, + {empty_value, 2}, {dict, 0}]}, %% diameter.hrl is included for #diameter_avp {?attribute, include_lib, "diameter/include/diameter.hrl"}, @@ -178,13 +179,14 @@ erl_forms(Mod, ParseD) -> f_msg2rec(ParseD), f_name2rec(ParseD), f_avp_name(ParseD), - f_avp_arity(ParseD), + f_avp_arity_1(ParseD), + f_avp_arity_2(ParseD), f_avp_header(ParseD), f_avp(ParseD), f_enumerated_avp(ParseD), f_empty_value(ParseD), f_dict(ParseD), - {eof, erl_anno:new(?LINE)}]], + {eof, ?LINE}]], lists:append(Forms). @@ -418,10 +420,32 @@ vendor_id_map(ParseD) -> get_value(grouped, ParseD)). %%% ------------------------------------------------------------------------ +%%% # avp_arity/1 +%%% ------------------------------------------------------------------------ + +f_avp_arity_1(ParseD) -> + {?function, avp_arity, 1, avp_arities(ParseD) ++ [?BADARG(1)]}. + +avp_arities(ParseD) -> + Msgs = get_value(messages, ParseD), + Groups = get_value(grouped, ParseD) + ++ lists:flatmap(fun avps/1, get_value(import_groups, ParseD)), + lists:map(fun c_avp_arities/1, Msgs ++ Groups). + +c_avp_arities({N,_,_,_,As}) -> + c_avp_arities(N,As); +c_avp_arities({N,_,_,As}) -> + c_avp_arities(N,As). + +c_avp_arities(Name, Avps) -> + Arities = [{?A(N), A} || T <- Avps, {N,A} <- [avp_info(T)]], + {?clause, [?Atom(Name)], [], [?TERM(Arities)]}. + +%%% ------------------------------------------------------------------------ %%% # avp_arity/2 %%% ------------------------------------------------------------------------ -f_avp_arity(ParseD) -> +f_avp_arity_2(ParseD) -> {?function, avp_arity, 2, avp_arity(ParseD)}. avp_arity(ParseD) -> @@ -452,7 +476,7 @@ c_arity(Name, Avp) -> %%% ------------------------------------------------------------------------ f_avp(ParseD) -> - {?function, avp, 3, avp(ParseD) ++ [?BADARG(3)]}. + {?function, avp, 4, avp(ParseD) ++ [?BADARG(4)]}. avp(ParseD) -> Native = get_value(avp_types, ParseD), @@ -491,19 +515,25 @@ avp(Native, Imported, Custom, Enums) -> not_in(List, X) -> not lists:member(X, List). -c_base_avp({AvpName, T}) -> - {?clause, [?VAR('T'), ?VAR('Data'), ?Atom(AvpName)], +c_base_avp({AvpName, "Enumerated"}) -> + {?clause, [?VAR('T'), ?VAR('Data'), ?Atom(AvpName), ?VAR('_')], [], - [b_base_avp(AvpName, T)]}. + [?CALL(enumerated_avp, [?VAR('T'), ?Atom(AvpName), ?VAR('Data')])]}; -b_base_avp(AvpName, "Enumerated") -> - ?CALL(enumerated_avp, [?VAR('T'), ?Atom(AvpName), ?VAR('Data')]); - -b_base_avp(AvpName, "Grouped") -> - ?CALL(grouped_avp, [?VAR('T'), ?Atom(AvpName), ?VAR('Data')]); +c_base_avp({AvpName, "Grouped"}) -> + {?clause, [?VAR('T'), ?VAR('Data'), ?Atom(AvpName), ?VAR('Opts')], + [], + [?CALL(grouped_avp, [?VAR('T'), + ?Atom(AvpName), + ?VAR('Data'), + ?VAR('Opts')])]}; -b_base_avp(_, Type) -> - ?APPLY(diameter_types, ?A(Type), [?VAR('T'), ?VAR('Data')]). +c_base_avp({AvpName, Type}) -> + {?clause, [?VAR('T'), ?VAR('Data'), ?Atom(AvpName), ?VAR('Opts')], + [], + [?APPLY(diameter_types, ?A(Type), [?VAR('T'), + ?VAR('Data'), + ?VAR('Opts')])]}. cs_imported_avp({Mod, Avps}, Enums, CustomNames) -> lists:map(fun(A) -> imported_avp(Mod, A, Enums) end, @@ -525,11 +555,13 @@ imported_avp(Mod, {AvpName, _, _, _}, _) -> c_imported_avp(Mod, AvpName). c_imported_avp(Mod, AvpName) -> - {?clause, [?VAR('T'), ?VAR('Data'), ?Atom(AvpName)], + {?clause, [?VAR('T'), ?VAR('Data'), ?Atom(AvpName), ?VAR('Opts')], [], - [?APPLY(Mod, avp, [?VAR('T'), - ?VAR('Data'), - ?Atom(AvpName)])]}. + [?CALL(avp, [?VAR('T'), + ?VAR('Data'), + ?Atom(AvpName), + ?VAR('Opts'), + ?ATOM(Mod)])]}. cs_custom_avp({Mod, Key, Avps}, Dict) -> lists:map(fun(N) -> c_custom_avp(Mod, Key, N, orddict:fetch(N, Dict)) end, @@ -537,9 +569,12 @@ cs_custom_avp({Mod, Key, Avps}, Dict) -> c_custom_avp(Mod, Key, AvpName, Type) -> {F,A} = custom(Key, AvpName, Type), - {?clause, [?VAR('T'), ?VAR('Data'), ?Atom(AvpName)], + {?clause, [?VAR('T'), ?VAR('Data'), ?Atom(AvpName), ?VAR('Opts')], [], - [?APPLY(?A(Mod), ?A(F), [?VAR('T'), ?Atom(A), ?VAR('Data')])]}. + [?APPLY(?A(Mod), ?A(F), [?VAR('T'), + ?Atom(A), + ?VAR('Data'), + ?VAR('Opts')])]}. custom(custom_types, AvpName, Type) -> {AvpName, Type}; @@ -568,7 +603,11 @@ enumerated_avp(Mod, Es, Enums) -> Es). cs_enumerated_avp(true, Mod, Name) -> - [c_imported_avp(Mod, Name)]; + [{?clause, [?VAR('T'), ?Atom(Name), ?VAR('Data')], + [], + [?APPLY(Mod, enumerated_avp, [?VAR('T'), + ?Atom(Name), + ?VAR('Data')])]}]; cs_enumerated_avp(false, _, _) -> []. @@ -682,7 +721,7 @@ v(false, _, _, _) -> %%% ------------------------------------------------------------------------ f_empty_value(ParseD) -> - {?function, empty_value, 1, empty_value(ParseD)}. + {?function, empty_value, 2, empty_value(ParseD)}. empty_value(ParseD) -> Imported = lists:flatmap(fun avps/1, get_value(import_enums, ParseD)), @@ -692,15 +731,17 @@ empty_value(ParseD) -> not lists:keymember(N, 1, Imported)] ++ Imported, lists:map(fun c_empty_value/1, Groups ++ Enums) - ++ [{?clause, [?VAR('Name')], [], [?CALL(empty, [?VAR('Name')])]}]. + ++ [{?clause, [?VAR('Name'), ?VAR('Opts')], + [], + [?CALL(empty, [?VAR('Name'), ?VAR('Opts')])]}]. c_empty_value({Name, _, _, _}) -> - {?clause, [?Atom(Name)], + {?clause, [?Atom(Name), ?VAR('Opts')], [], - [?CALL(empty_group, [?Atom(Name)])]}; + [?CALL(empty_group, [?Atom(Name), ?VAR('Opts')])]}; c_empty_value({Name, _}) -> - {?clause, [?Atom(Name)], + {?clause, [?Atom(Name), ?VAR('_')], [], [?TERM(<<0:32>>)]}. @@ -790,20 +831,7 @@ header() -> ("%% -------------------------------------------------------------------\n" "%% This is a generated file.\n" "%% -------------------------------------------------------------------\n" - "\n" - "%%\n" - "%% Copyright (c) Ericsson AB. All rights reserved.\n" - "%%\n" - "%% The information in this document is the property of Ericsson.\n" - "%%\n" - "%% Except as specifically authorized in writing by Ericsson, the\n" - "%% receiver of this document shall keep the information contained\n" - "%% herein confidential and shall protect the same in whole or in\n" - "%% part from disclosure and dissemination to third parties.\n" - "%%\n" - "%% Disclosure and disseminations to the receivers employees shall\n" - "%% only be made on a strict need to know basis.\n" - "%%\n\n"). + "\n"). hrl_header(Name) -> header() ++ "-hrl_name('" ++ ?S(Name) ++ ".hrl').\n". diff --git a/lib/diameter/src/diameter.app.src b/lib/diameter/src/diameter.app.src index d380ebbd92..9a6e47006b 100644 --- a/lib/diameter/src/diameter.app.src +++ b/lib/diameter/src/diameter.app.src @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -28,10 +28,10 @@ ]}, {registered, [%REGISTERED%]}, {applications, [ - {stdlib, "2.0"}, {kernel, "3.0"}%, {erts, "6.0"} - %% {syntax-tools, "1.6.14"} - %% {runtime-tools, "1.8.14"} - %, {ssl, "5.3.4"} + {stdlib, "2.4"}, {kernel, "3.2"}%, {erts, "6.4"} + %% {syntax-tools, "1.6,18"} + %% {runtime-tools, "1.8.16"} + %, {ssl, "6.0"} ]}, {env, []}, {mod, {diameter_app, []}}, diff --git a/lib/diameter/src/diameter.appup.src b/lib/diameter/src/diameter.appup.src index 618d5a7f10..07d0389bfd 100644 --- a/lib/diameter/src/diameter.appup.src +++ b/lib/diameter/src/diameter.appup.src @@ -2,7 +2,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -49,7 +49,10 @@ {"1.10", [{restart_application, diameter}]}, %% 18.0 {"1.11", [{restart_application, diameter}]}, %% 18.1 {"1.11.1", [{restart_application, diameter}]}, %% 18.2 - {"1.11.2", [{restart_application, diameter}]} %% 18.3 + {"1.11.2", [{restart_application, diameter}]}, %% 18.3 + {"1.12", [{restart_application, diameter}]}, %% 19.0 + {"1.12.1", [{restart_application, diameter}]}, %% 19.1 + {"1.12.2", [{restart_application, diameter}]} %% 19.3 ], [ {"0.9", [{restart_application, diameter}]}, @@ -80,6 +83,9 @@ {"1.10", [{restart_application, diameter}]}, {"1.11", [{restart_application, diameter}]}, {"1.11.1", [{restart_application, diameter}]}, - {"1.11.2", [{restart_application, diameter}]} + {"1.11.2", [{restart_application, diameter}]}, + {"1.12", [{restart_application, diameter}]}, + {"1.12.1", [{restart_application, diameter}]}, + {"1.12.2", [{restart_application, diameter}]} ] }. diff --git a/lib/diameter/src/info/diameter_info.erl b/lib/diameter/src/info/diameter_info.erl index 59a3b94ee4..23a42e48fd 100644 --- a/lib/diameter/src/info/diameter_info.erl +++ b/lib/diameter/src/info/diameter_info.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -195,7 +195,7 @@ format(Tables, SFun, CFun) %%% %%% Description: Pretty-print records in a named tables as collected %%% from local and remote nodes. Each table listing is -%%% preceeded by a banner. +%%% preceded by a banner. %%% ---------------------------------------------------------- format(Local, Remote, SFun) -> diff --git a/lib/diameter/src/modules.mk b/lib/diameter/src/modules.mk index 4e4ce60ddf..bb3b234d20 100644 --- a/lib/diameter/src/modules.mk +++ b/lib/diameter/src/modules.mk @@ -1,7 +1,7 @@ # %CopyrightBegin% # -# Copyright Ericsson AB 2010-2016. All Rights Reserved. +# Copyright Ericsson AB 2010-2017. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -39,7 +39,7 @@ RT_MODULES = \ base/diameter_config \ base/diameter_config_sup \ base/diameter_codec \ - base/diameter_dict \ + base/diameter_gen \ base/diameter_lib \ base/diameter_misc_sup \ base/diameter_peer \ diff --git a/lib/diameter/src/transport/diameter_sctp.erl b/lib/diameter/src/transport/diameter_sctp.erl index 4a005b853d..6a9f1f940b 100644 --- a/lib/diameter/src/transport/diameter_sctp.erl +++ b/lib/diameter/src/transport/diameter_sctp.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -52,21 +52,20 @@ %% Keys into process dictionary. -define(INFO_KEY, info). -define(REF_KEY, ref). +-define(TRANSPORT_KEY, transport). -define(ERROR(T), erlang:error({T, ?MODULE, ?LINE})). %% The default port for a listener. -define(DEFAULT_PORT, 3868). %% RFC 3588, ch 2.1 -%% Remote addresses to accept connections from. --define(DEFAULT_ACCEPT, []). %% any - %% How long to wait for a transport process to attach after %% association establishment. -define(ACCEPT_TIMEOUT, 5000). -type connect_option() :: {raddr, inet:ip_address()} | {rport, inet:port_number()} + | option() | term(). %% gen_sctp:open_option(). -type match() :: inet:ip_address() @@ -74,8 +73,14 @@ | [match()]. -type listen_option() :: {accept, match()} + | option() | term(). %% gen_sctp:open_option(). +-type option() :: {sender, boolean()} + | sender + | {packet, boolean() | raw} + | {message_cb, false | diameter:evaluable()}. + -type uint() :: non_neg_integer(). %% Accepting/connecting transport process state. @@ -87,20 +92,35 @@ %% {RAs, RP, Errors} | connect, socket :: gen_sctp:sctp_socket() | undefined, - assoc_id :: gen_sctp:assoc_id(), %% association identifier + active = false :: boolean(), %% is socket active? + recv = true :: boolean(), %% should it be active? + assoc_id :: gen_sctp:assoc_id() %% association identifier + | undefined + | true, peer :: {[inet:ip_address()], uint()} %% {RAs, RP} | undefined, streams :: {uint(), uint()} %% {InStream, OutStream} counts | undefined, - os = 0 :: uint()}). %% next output stream + os = 0 :: uint(), %% next output stream + packet = true :: boolean() %% legacy transport_data? + | raw, + message_cb = false :: false | diameter:evaluable(), + send = false :: pid() | boolean()}). %% sending process + +%% Monitor process state. +-record(monitor, + {transport :: pid(), + ack = false :: boolean(), + socket :: gen_sctp:sctp_socket(), + assoc_id :: gen_sctp:assoc_id()}). %% next output stream %% Listener process state. -record(listener, {ref :: reference(), socket :: gen_sctp:sctp_socket(), - count = 0 :: uint(), %% attached transport processes + service :: pid(), %% service process pending = {0, queue:new()}, - accept :: [match()]}). + opts :: [[match()] | boolean() | diameter:evaluable()]}). %% Field pending implements two queues: the first of transport-to-be %% processes to which an association has been assigned but for which %% diameter hasn't yet spawned a transport process, a short-lived @@ -129,11 +149,14 @@ -> {ok, pid(), [inet:ip_address()]} when Ref :: diameter:transport_ref(). -start(T, #diameter_service{capabilities = Caps}, Opts) +start(T, Svc, Opts) when is_list(Opts) -> + #diameter_service{capabilities = Caps, + pid = Pid} + = Svc, diameter_sctp_sup:start(), %% start supervisors on demand Addrs = Caps#diameter_caps.host_ip_address, - s(T, Addrs, lists:map(fun ip/1, Opts)). + s(T, Addrs, Pid, lists:map(fun ip/1, Opts)). ip({ifaddr, A}) -> {ip, A}; @@ -144,18 +167,22 @@ ip(T) -> %% when there is not yet an association to assign it, or at comm_up on %% a new association in which case the call retrieves a transport from %% the pending queue. -s({accept, Ref} = A, Addrs, Opts) -> - {LPid, LAs} = listener(Ref, {Opts, Addrs}), +s({accept, Ref} = A, Addrs, SvcPid, Opts) -> + {ok, LPid, LAs} = listener(Ref, {Opts, SvcPid, Addrs}), try gen_server:call(LPid, {A, self()}, infinity) of - {ok, TPid} -> {ok, TPid, LAs} + {ok, TPid} -> + {ok, TPid, LAs}; + No -> + {error, No} catch - exit: Reason -> {error, Reason} + exit: Reason -> + {error, Reason} end; %% This implementation is due to there being no accept call in %% gen_sctp in order to be able to accept a new association only %% *after* an accepting transport has been spawned. -s({connect = C, Ref}, Addrs, Opts) -> +s({connect = C, Ref}, Addrs, _SvcPid, Opts) -> diameter_sctp_sup:start_child({C, self(), Opts, Addrs, Ref}). %% start_link/1 @@ -209,22 +236,39 @@ init(T) -> %% i/1 +i(#monitor{transport = TPid} = S) -> + monitor(process, TPid), + putr(?TRANSPORT_KEY, TPid), + proc_lib:init_ack({ok, self()}), + S; + %% A process owning a listening socket. -i({listen, Ref, {Opts, Addrs}}) -> +i({listen, Ref, {Opts, SvcPid, Addrs}}) -> + monitor(process, SvcPid), [_] = diameter_config:subscribe(Ref, transport), %% assert existence - {[Matches], Rest} = proplists:split(Opts, [accept]), + {Split, Rest} + = proplists:split(Opts, [accept, packet, sender, message_cb]), + OwnOpts = lists:append(Split), {LAs, Sock} = AS = open(Addrs, Rest, ?DEFAULT_PORT), ok = gen_sctp:listen(Sock, true), true = diameter_reg:add_new({?MODULE, listener, {Ref, AS}}), proc_lib:init_ack({ok, self(), LAs}), #listener{ref = Ref, + service = SvcPid, socket = Sock, - accept = [[M] || {accept, M} <- Matches]}; + opts = [[[M] || {accept, M} <- OwnOpts], + proplists:get_value(packet, OwnOpts, true) + | [proplists:get_value(K, OwnOpts, false) + || K <- [sender, message_cb]]]}; %% A connecting transport. i({connect, Pid, Opts, Addrs, Ref}) -> - {[As, Ps], Rest} = proplists:split(Opts, [raddr, rport]), - RAs = [diameter_lib:ipaddr(A) || {raddr, A} <- As], + {[Ps | Split], Rest} + = proplists:split(Opts, [rport, raddr, packet, sender, message_cb]), + OwnOpts = lists:append(Split), + CB = proplists:get_value(message_cb, OwnOpts, false), + false == CB orelse (Pid ! {diameter, ack}), + RAs = [diameter_lib:ipaddr(A) || {raddr, A} <- OwnOpts], [RP] = [P || {rport, P} <- Ps] ++ [P || P <- [?DEFAULT_PORT], [] == Ps], {LAs, Sock} = open(Addrs, Rest, 0), putr(?REF_KEY, Ref), @@ -232,7 +276,10 @@ i({connect, Pid, Opts, Addrs, Ref}) -> monitor(process, Pid), #transport{parent = Pid, mode = {connect, connect(Sock, RAs, RP, [])}, - socket = Sock}; + socket = Sock, + message_cb = CB, + packet = proplists:get_value(packet, OwnOpts, true), + send = proplists:get_value(sender, OwnOpts, false)}; %% An accepting transport spawned by diameter, not yet owning an %% association. @@ -266,11 +313,16 @@ i({K, Ref}, #transport{mode = {accept, _}} = S) -> receive {Ref, Pid} when K == parent -> %% transport process started S#transport{parent = Pid}; - {K, T, Matches} when K == peeloff -> %% association + {K, T, Opts} when K == peeloff -> %% association {sctp, Sock, _RA, _RP, _Data} = T, + [Matches, Packet, Sender, CB] = Opts, ok = accept_peer(Sock, Matches), demonitor(Ref, [flush]), - t(T, S#transport{socket = Sock}); + false == CB orelse (S#transport.parent ! {diameter, ack}), + t(T, S#transport{socket = Sock, + message_cb = CB, + packet = Packet, + send = Sender}); accept_timeout = T -> x(T); {'DOWN', _, process, _, _} = T -> @@ -281,24 +333,23 @@ i({K, Ref}, #transport{mode = {accept, _}} = S) -> %% Accepting processes can be started concurrently: ensure only one %% listener is started. -listener(LRef, T) -> - diameter_sync:call({?MODULE, listener, LRef}, - {?MODULE, listener, [{LRef, T}]}, +listener(Ref, T) -> + diameter_sync:call({?MODULE, listener, Ref}, + {?MODULE, listener, [{Ref, T}]}, infinity, infinity). -listener({LRef, T}) -> - l(diameter_reg:match({?MODULE, listener, {LRef, '_'}}), LRef, T). +listener({Ref, T}) -> + l(diameter_reg:match({?MODULE, listener, {Ref, '_'}}), Ref, T). %% Existing listening process ... l([{{?MODULE, listener, {_, AS}}, LPid}], _, _) -> - {LAs, _Sock} = AS, - {LPid, LAs}; + {LAs, _Sock} = AS, + {ok, LPid, LAs}; %% ... or not. -l([], LRef, T) -> - {ok, LPid, LAs} = diameter_sctp_sup:start_child({listen, LRef, T}), - {LPid, LAs}. +l([], Ref, T) -> + diameter_sctp_sup:start_child({listen, Ref, T}). %% open/3 @@ -364,11 +415,13 @@ type(T) -> %% # handle_call/3 %% --------------------------------------------------------------------------- -handle_call({{accept, Ref}, Pid}, _, #listener{ref = Ref, - count = K} - = S) -> +handle_call({{accept, Ref}, Pid}, _, #listener{ref = Ref} = S) -> {TPid, NewS} = accept(Ref, Pid, S), - {reply, {ok, TPid}, NewS#listener{count = K+1}}; + {reply, {ok, TPid}, NewS}; + +%% Transport is telling us of parent death. +handle_call({stop, _Pid} = Reason, _From, #monitor{} = S) -> + {stop, {shutdown, Reason}, ok, S}; handle_call(_, _, State) -> {reply, nok, State}. @@ -388,9 +441,13 @@ handle_info(T, #transport{} = S) -> {noreply, #transport{} = t(T,S)}; handle_info(T, #listener{} = S) -> - {noreply, #listener{} = l(T,S)}. + {noreply, #listener{} = l(T,S)}; + +handle_info(T, #monitor{} = S) -> + m(T,S), + {noreply, S}. -%% Prior to the possiblity of setting pool_size on in transport +%% Prior to the possibility of setting pool_size on in transport %% configuration, a new accepting transport was only started following %% the death of a predecessor, so that there was only at most one %% previously started transport process waiting for an association. @@ -410,6 +467,9 @@ code_change(_, State, _) -> %% # terminate/2 %% --------------------------------------------------------------------------- +terminate(_, #monitor{}) -> + ok; + terminate(_, #transport{assoc_id = undefined}) -> ok; @@ -433,14 +493,21 @@ getr(Key) -> %% Incoming message from SCTP. l({sctp, Sock, _RA, _RP, Data} = T, #listener{socket = Sock, - accept = Matches} + opts = Opts} = S) -> Id = assoc_id(Data), {TPid, NewS} = accept(S), - TPid ! {peeloff, setelement(2, T, peeloff(Sock, Id, TPid)), Matches}, + TPid ! {peeloff, setelement(2, T, peeloff(Sock, Id, TPid)), Opts}, setopts(Sock), NewS; +%% Service process has died. +l({'DOWN', _, process, Pid, _} = T, #listener{service = Pid, + socket = Sock}) -> + gen_sctp:close(Sock), + x(T); + +%% Accepting process has died. l({'DOWN', _MRef, process, TPid, _}, #listener{pending = {_,Q}} = S) -> down(queue:member(TPid, Q), TPid, S); @@ -454,20 +521,17 @@ l({transport, remove, _} = T, #listener{socket = Sock}) -> %% Accepting transport has died. %% One that's waiting for transport start in the pending queue ... -down(true, TPid, #listener{pending = {N,Q}, - count = K} - = S) -> +down(true, TPid, #listener{pending = {N,Q}} = S) -> NQ = queue:filter(fun(P) -> P /= TPid end, Q), if N < 0 -> %% awaiting an association ... - S#listener{count = K-1, - pending = {N+1, NQ}}; + S#listener{pending = {N+1, NQ}}; true -> %% ... or one has been assigned S#listener{pending = {N-1, NQ}} end; %% ... or one that's already attached. -down(false, _TPid, #listener{count = K} = S) -> - S#listener{count = K-1}. +down(false, _TPid, S) -> + S. %% t/2 %% @@ -487,12 +551,21 @@ t(T,S) -> %% Incoming message. transition({sctp, Sock, _RA, _RP, Data}, #transport{socket = Sock} = S) -> - setopts(Sock), - recv(Data, S); + setopts(S, recv(Data, S#transport{active = false})); %% Outgoing message. transition({diameter, {send, Msg}}, S) -> - send(Msg, S); + message(send, Msg, S); + +%% Monitor has sent an outgoing message. +transition(Msg, S) + when is_record(Msg, diameter_packet); + is_binary(Msg) -> + message(ack, Msg, S); + +%% Deferred actions from a message_cb. +transition({actions, Dir, Acts}, S) -> + actions(Acts, Dir, S); %% Request to close the transport connection. transition({diameter, {close, Pid}}, #transport{parent = Pid}) -> @@ -506,8 +579,18 @@ transition({diameter, {close, Pid}}, #transport{parent = Pid}) -> transition({diameter, {tls, _Ref, _Type, _Bool}}, _) -> stop; -%% Parent process has died. -transition({'DOWN', _, process, Pid, _}, #transport{parent = Pid}) -> +%% Parent process has died: call the monitor to not close the socket +%% during an ongoing send, but don't let it take forever. +transition({'DOWN', _, process, Pid, _}, #transport{parent = Pid, + send = MPid}) -> + is_boolean(MPid) + orelse ok == (catch gen_server:call(MPid, {stop, Pid})) + orelse exit(MPid, kill), + stop; + +%% Monitor process has died. +transition({'DOWN', _, process, MPid, _}, #transport{send = MPid}) + when is_pid(MPid) -> stop; %% Timeout after transport process has been started. @@ -520,6 +603,18 @@ transition({resolve_port, Pid}, #transport{socket = Sock}) Pid ! inet:port(Sock), ok. +%% m/2 + +m({Msg, StreamId}, #monitor{socket = Sock, + transport = TPid, + assoc_id = AId, + ack = B}) -> + send(Sock, AId, StreamId, Msg), + B andalso (TPid ! Msg); + +m({'DOWN', _, process, TPid, _} = T, #monitor{transport = TPid}) -> + x(T). + %% Crash on anything unexpected. ok({ok, T}) -> @@ -562,33 +657,52 @@ q(Ref, Pid, #listener{pending = {_,Q}}) -> %% send/2 +%% Start monitor process on first send. +send(Msg, #transport{send = true, + socket = Sock, + assoc_id = AId, + message_cb = CB} + = S) -> + {ok, MPid} = diameter_sctp_sup:start_child(#monitor{transport = self(), + socket = Sock, + assoc_id = AId, + ack = false /= CB}), + monitor(process, MPid), + send(Msg, S#transport{send = MPid}); + %% Outbound Diameter message on a specified stream ... -send(#diameter_packet{bin = Bin, transport_data = {outstream, SId}}, +send(#diameter_packet{transport_data = {outstream, SId}} + = Msg, #transport{streams = {_, OS}} = S) -> - send(SId rem OS, Bin, S), - S; + send(SId rem OS, Msg, S); %% ... or not: rotate through all streams. -send(#diameter_packet{bin = Bin}, S) -> - send(Bin, S); -send(Bin, #transport{streams = {_, OS}, +send(Msg, #transport{streams = {_, OS}, os = N} - = S) - when is_binary(Bin) -> - send(N, Bin, S), - S#transport{os = (N + 1) rem OS}. + = S) -> + send(N, Msg, S#transport{os = (N + 1) rem OS}). %% send/3 -send(StreamId, Bin, #transport{socket = Sock, - assoc_id = AId}) -> - send(Sock, AId, StreamId, Bin). +send(StreamId, Msg, #transport{send = false, + socket = Sock, + assoc_id = AId} + = S) -> + send(Sock, AId, StreamId, Msg), + message(ack, Msg, S); + +send(StreamId, Msg, #transport{send = MPid} = S) -> + MPid ! {Msg, StreamId}, + S. %% send/4 -send(Sock, AssocId, Stream, Bin) -> - case gen_sctp:send(Sock, AssocId, Stream, Bin) of +send(Sock, AssocId, StreamId, #diameter_packet{bin = Bin}) -> + send(Sock, AssocId, StreamId, Bin); + +send(Sock, AssocId, StreamId, Bin) -> + case gen_sctp:send(Sock, AssocId, StreamId, Bin) of ok -> ok; {error, Reason} -> @@ -608,7 +722,9 @@ recv({_, #sctp_assoc_change{state = comm_up, = S) -> Ref = getr(?REF_KEY), publish(T, Ref, Id, Sock), - up(S#transport{assoc_id = Id, + %% Deal with different association id after peeloff on Solaris by + %% taking the id from the first reception. + up(S#transport{assoc_id = T == accept orelse Id, streams = {IS, OS}}); %% ... or not: try the next address. @@ -623,17 +739,19 @@ recv({_, #sctp_assoc_change{} = E}, recv({_, #sctp_assoc_change{}}, _) -> stop; +%% First inbound on an accepting transport. +recv({[#sctp_sndrcvinfo{assoc_id = Id}], _Bin} + = T, + #transport{assoc_id = true} + = S) -> + recv(T, S#transport{assoc_id = Id}); + %% Inbound Diameter message. -recv({[#sctp_sndrcvinfo{stream = Id}], Bin}, #transport{parent = Pid}) +recv({[#sctp_sndrcvinfo{}], Bin} = Msg, S) when is_binary(Bin) -> - diameter_peer:recv(Pid, #diameter_packet{transport_data = {stream, Id}, - bin = Bin}), - ok; + message(recv, Msg, S); -recv({_, #sctp_shutdown_event{assoc_id = A}}, - #transport{assoc_id = Id}) - when A == Id; - A == 0 -> +recv({_, #sctp_shutdown_event{}}, _) -> stop; %% Note that diameter_sctp(3) documents that sctp_events cannot be @@ -749,6 +867,23 @@ connect(Sock, [Addr | AT] = As, Port, Reasons) -> connect(Sock, AT, Port, [{Addr, E} | Reasons]) end. +%% setopts/2 + +setopts(_, #transport{socket = Sock, + active = A, + recv = B} + = S) + when B, not A -> + setopts(Sock), + S#transport{active = true}; + +setopts(_, #transport{} = S) -> + S; + +setopts(#transport{socket = Sock}, T) -> + setopts(Sock), + T. + %% setopts/1 setopts(Sock) -> @@ -756,3 +891,83 @@ setopts(Sock) -> ok -> ok; X -> x({setopts, Sock, X}) %% possibly on peer disconnect end. + +%% A message_cb is invoked whenever a message is sent or received, or +%% to provide acknowledgement of a completed send or discarded +%% request. See diameter_tcp for semantics, the only difference being +%% that a recv callback can get a diameter_packet record as Msg +%% depending on how/if option packet has been specified. + +%% message/3 + +message(send, false = M, S) -> + message(ack, M, S); + +message(ack, _, #transport{message_cb = false} = S) -> + S; + +message(Dir, Msg, S) -> + setopts(S, actions(cb(S, Dir, Msg), Dir, S)). + +%% actions/3 + +actions([], _, S) -> + S; + +actions([B | As], Dir, S) + when is_boolean(B) -> + actions(As, Dir, S#transport{recv = B}); + +actions([Dir | As], _, S) + when Dir == send; + Dir == recv -> + actions(As, Dir, S); + +actions([Msg | As], send = Dir, S) + when is_record(Msg, diameter_packet); + is_binary(Msg) -> + actions(As, Dir, send(Msg, S)); + +actions([Msg | As], recv = Dir, #transport{parent = Pid} = S) + when is_record(Msg, diameter_packet); + is_binary(Msg) -> + diameter_peer:recv(Pid, Msg), + actions(As, Dir, S); + +actions([{defer, Tmo, Acts} | As], Dir, S) -> + erlang:send_after(Tmo, self(), {actions, Dir, Acts}), + actions(As, Dir, S); + +actions(CB, _, S) -> + S#transport{message_cb = CB}. + +%% cb/3 + +cb(#transport{message_cb = false, packet = P}, recv, Msg) -> + [pkt(P, true, Msg)]; + +cb(#transport{message_cb = CB, packet = P}, recv = D, Msg) -> + cb(CB, D, pkt(P, false, Msg)); + +cb(#transport{message_cb = CB}, Dir, Msg) -> + cb(CB, Dir, Msg); + +cb(false, send, Msg) -> + [Msg]; + +cb(CB, Dir, Msg) -> + diameter_lib:eval([CB, Dir, Msg]). + +%% pkt/3 + +pkt(false, _, {_Info, Bin}) -> + Bin; + +pkt(true, _, {[#sctp_sndrcvinfo{stream = Id}], Bin}) -> + #diameter_packet{bin = Bin, transport_data = {stream, Id}}; + +pkt(raw, true, {[Info], Bin}) -> + #diameter_packet{bin = Bin, transport_data = Info}; + +pkt(raw, false, {[_], _} = Msg) -> + Msg. diff --git a/lib/diameter/src/transport/diameter_sctp_sup.erl b/lib/diameter/src/transport/diameter_sctp_sup.erl index 36050aaf28..e8e26ec7c5 100644 --- a/lib/diameter/src/transport/diameter_sctp_sup.erl +++ b/lib/diameter/src/transport/diameter_sctp_sup.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -49,6 +49,7 @@ start() -> start_child(T) -> SupRef = case element(1,T) of + monitor -> ?TRANSPORT_SUP; connect -> ?TRANSPORT_SUP; accept -> ?TRANSPORT_SUP; listen -> ?LISTENER_SUP diff --git a/lib/diameter/src/transport/diameter_tcp.erl b/lib/diameter/src/transport/diameter_tcp.erl index 546c2cfa5e..a2f393d5d4 100644 --- a/lib/diameter/src/transport/diameter_tcp.erl +++ b/lib/diameter/src/transport/diameter_tcp.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -19,7 +19,6 @@ %% -module(diameter_tcp). --dialyzer({no_fail_call, throttle/2}). -behaviour(gen_server). @@ -53,6 +52,7 @@ %% Keys into process dictionary. -define(INFO_KEY, info). -define(REF_KEY, ref). +-define(TRANSPORT_KEY, transport). -define(ERROR(T), erlang:error({T, ?MODULE, ?LINE})). @@ -68,19 +68,23 @@ %% The same gen_server implementation supports three different kinds %% of processes: an actual transport process, one that will club it to %% death should the parent die before a connection is established, and -%% a process owning the listening port. +%% a process owning the listening port. The monitor process +%% historically died after connection establishment, but can now live +%% on as the sender of outgoing messages, so that a blocking send +%% doesn't prevent messages from being received. %% Listener process state. --record(listener, {socket :: inet:socket(), - count = 1 :: non_neg_integer()}). %% accepting processes -%% The count of accepting processes was previously used to terminate -%% the listening process, but diameter_reg:subscribe/2 is now used for -%% this. Leave the the count for trace purposes. +-record(listener, {socket :: inet:socket(), + module :: module(), + service = false :: false | pid()}). %% service process %% Monitor process state. -record(monitor, - {parent :: pid(), - transport = self() :: pid()}). + {parent :: reference() | false | pid(), + transport = self() :: pid(), + ack = false :: boolean(), + socket :: inet:socket() | ssl:sslsocket() | undefined, + module :: module() | undefined}). -type length() :: 0..16#FFFFFF. %% message length from Diameter header -type size() :: non_neg_integer(). %% accumulated binary size @@ -100,25 +104,30 @@ -type listen_option() :: {accept, match()} | {ssl_options, true | [ssl:listen_option()]} + | option() | ssl:listen_option() | gen_tcp:listen_option(). -type option() :: {port, non_neg_integer()} - | {fragment_timer, 0..16#FFFFFFFF} - | {throttle_cb, diameter:evaluable()}. + | {sender, boolean()} + | sender + | {message_cb, false | diameter:evaluable()} + | {fragment_timer, 0..16#FFFFFFFF}. %% Accepting/connecting transport process state. -record(transport, {socket :: inet:socket() | ssl:sslsocket(), %% accept/connect socket + active = false :: boolean(), %% is socket active? + recv = true :: boolean(), %% should it be active? parent :: pid(), %% of process that started us module :: module(), %% gen_tcp-like module - frag = <<>> :: frag(), %% message fragment ssl :: [term()] | boolean(), %% ssl options, ssl or not + frag = <<>> :: frag(), %% message fragment timeout :: infinity | 0..16#FFFFFFFF, %% fragment timeout tref = false :: false | reference(), %% fragment timer reference flush = false :: boolean(), %% flush fragment at timeout? - throttle_cb :: false | diameter:evaluable(), %% ask to receive - throttled :: boolean() | binary()}). %% stopped receiving? + message_cb :: false | diameter:evaluable(), + send :: pid() | false}). %% sending process %% The usual transport using gen_tcp can be replaced by anything %% sufficiently gen_tcp-like by passing a 'module' option as the first @@ -138,11 +147,15 @@ | {ok, pid()} when Ref :: diameter:transport_ref(). -start({T, Ref}, #diameter_service{capabilities = Caps}, Opts) -> +start({T, Ref}, Svc, Opts) -> + #diameter_service{capabilities = Caps, + pid = SvcPid} + = Svc, + diameter_tcp_sup:start(), %% start tcp supervisors on demand {Mod, Rest} = split(Opts), Addrs = Caps#diameter_caps.host_ip_address, - Arg = {T, Ref, Mod, self(), Rest, Addrs}, + Arg = {T, Ref, Mod, self(), Rest, Addrs, SvcPid}, diameter_tcp_sup:start_child(Arg). split([{module, M} | Opts]) -> @@ -196,61 +209,65 @@ init(T) -> %% i/1 %% A transport process. -i({T, Ref, Mod, Pid, Opts, Addrs}) +i({T, Ref, Mod, Pid, Opts, Addrs, SvcPid}) when T == accept; T == connect -> monitor(process, Pid), %% Since accept/connect might block indefinitely, spawn a process - %% that does nothing but kill us with the parent until call - %% returns. - {ok, MPid} = diameter_tcp_sup:start_child(#monitor{parent = Pid}), + %% that kills us with the parent until call returns, and then + %% sends outgoing messages. {[SO|TO], Rest} = proplists:split(Opts, [ssl_options, - fragment_timer, - throttle_cb]), + sender, + message_cb, + fragment_timer]), SslOpts = ssl_opts(SO), OwnOpts = lists:append(TO), Tmo = proplists:get_value(fragment_timer, OwnOpts, ?DEFAULT_FRAGMENT_TIMEOUT), + [CB, Sender] = [proplists:get_value(K, OwnOpts, false) + || K <- [message_cb, sender]], ?IS_TIMEOUT(Tmo) orelse ?ERROR({fragment_timer, Tmo}), - Throttle = proplists:get_value(throttle_cb, OwnOpts, false), - Sock = init(T, Ref, Mod, Pid, SslOpts, Rest, Addrs), - MPid ! {stop, self()}, %% tell the monitor to die + {ok, MPid} = diameter_tcp_sup:start_child(#monitor{parent = Pid}), + Sock = init(T, Ref, Mod, Pid, SslOpts, Rest, Addrs, SvcPid), M = if SslOpts -> ssl; true -> Mod end, + Sender andalso monitor(process, MPid), + false == CB orelse (Pid ! {diameter, ack}), + MPid ! {start, self(), Sender andalso {Sock, M}, false /= CB}, putr(?REF_KEY, Ref), - throttle(#transport{parent = Pid, - module = M, - socket = Sock, - ssl = SslOpts, - timeout = Tmo, - throttle_cb = Throttle, - throttled = false /= Throttle}); + setopts(#transport{parent = Pid, + module = M, + socket = Sock, + ssl = SslOpts, + message_cb = CB, + timeout = Tmo, + send = Sender andalso MPid}); %% Put the reference in the process dictionary since we now use it %% advertise the ssl socket after TLS upgrade. %% A monitor process to kill the transport if the parent dies. i(#monitor{parent = Pid, transport = TPid} = S) -> + putr(?TRANSPORT_KEY, TPid), proc_lib:init_ack({ok, self()}), - monitor(process, Pid), monitor(process, TPid), - S; + S#monitor{parent = monitor(process, Pid)}; %% In principle a link between the transport and killer processes %% could do the same thing: have the accepting/connecting process be %% killed when the killer process dies as a consequence of parent %% death. However, a link can be unlinked and this is exactly what -%% gen_tcp seems to so. Links should be left to supervisors. +%% gen_tcp seems to do. Links should be left to supervisors. -i({listen, LRef, APid, {Mod, Opts, Addrs}}) -> - [_] = diameter_config:subscribe(LRef, transport), %% assert existence +i({listen, Ref, {Mod, Opts, Addrs}}) -> + [_] = diameter_config:subscribe(Ref, transport), %% assert existence {[LA, LP], Rest} = proplists:split(Opts, [ip, port]), LAddrOpt = get_addr(LA, Addrs), LPort = get_port(LP), {ok, LSock} = Mod:listen(LPort, gen_opts(LAddrOpt, Rest)), LAddr = laddr(LAddrOpt, Mod, LSock), - true = diameter_reg:add_new({?MODULE, listener, {LRef, {LAddr, LSock}}}), + true = diameter_reg:add_new({?MODULE, listener, {Ref, {LAddr, LSock}}}), proc_lib:init_ack({ok, self(), {LAddr, LSock}}), - monitor(process, APid), - #listener{socket = LSock}. + #listener{socket = LSock, + module = Mod}. laddr([], Mod, Sock) -> {ok, {Addr, _Port}} = sockname(Mod, Sock), @@ -268,21 +285,22 @@ ssl_opts([{ssl_options, Opts}]) ssl_opts(T) -> ?ERROR({ssl_options, T}). -%% init/7 +%% init/8 %% Establish a TLS connection before capabilities exchange ... -init(Type, Ref, Mod, Pid, true, Opts, Addrs) -> - init(Type, Ref, ssl, Pid, [{cb_info, ?TCP_CB(Mod)} | Opts], Addrs); +init(Type, Ref, Mod, Pid, true, Opts, Addrs, SvcPid) -> + init(Type, Ref, ssl, Pid, [{cb_info, ?TCP_CB(Mod)} | Opts], Addrs, SvcPid); %% ... or not. -init(Type, Ref, Mod, Pid, _, Opts, Addrs) -> - init(Type, Ref, Mod, Pid, Opts, Addrs). +init(Type, Ref, Mod, Pid, _, Opts, Addrs, SvcPid) -> + init(Type, Ref, Mod, Pid, Opts, Addrs, SvcPid). -%% init/6 +%% init/7 -init(accept = T, Ref, Mod, Pid, Opts, Addrs) -> +init(accept = T, Ref, Mod, Pid, Opts, Addrs, SvcPid) -> {[Matches], Rest} = proplists:split(Opts, [accept]), - {LAddr, LSock} = listener(Ref, {Mod, Rest, Addrs}), + {ok, LPid, {LAddr, LSock}} = listener(Ref, {Mod, Rest, Addrs}), + ok = gen_server:call(LPid, {accept, SvcPid}, infinity), proc_lib:init_ack({ok, self(), [LAddr]}), Sock = ok(accept(Mod, LSock)), ok = accept_peer(Mod, Sock, accept(Matches)), @@ -290,7 +308,7 @@ init(accept = T, Ref, Mod, Pid, Opts, Addrs) -> diameter_peer:up(Pid), Sock; -init(connect = T, Ref, Mod, Pid, Opts, Addrs) -> +init(connect = T, Ref, Mod, Pid, Opts, Addrs, _SvcPid) -> {[LA, RA, RP], Rest} = proplists:split(Opts, [ip, raddr, rport]), LAddrOpt = get_addr(LA, Addrs), RAddr = get_addr(RA), @@ -344,24 +362,26 @@ accept(Opts) -> %% Accepting processes can be started concurrently: ensure only one %% listener is started. -listener(LRef, T) -> - diameter_sync:call({?MODULE, listener, LRef}, - {?MODULE, listener, [{LRef, T, self()}]}, +listener(Ref, T) -> + diameter_sync:call({?MODULE, listener, Ref}, + {?MODULE, listener, [{Ref, T, self()}]}, infinity, infinity). -listener({LRef, T, TPid}) -> - l(diameter_reg:match({?MODULE, listener, {LRef, '_'}}), LRef, T, TPid). +%% listener/1 + +listener({Ref, T, _TPid}) -> + l(diameter_reg:match({?MODULE, listener, {Ref, '_'}}), Ref, T). + +%% l/3 %% Existing listening process ... -l([{{?MODULE, listener, {_, AS}}, LPid}], _, _, TPid) -> - LPid ! {accept, TPid}, - AS; +l([{{?MODULE, listener, {_, AS}}, LPid}], _, _) -> + {ok, LPid, AS}; %% ... or not. -l([], LRef, T, TPid) -> - {ok, _, AS} = diameter_tcp_sup:start_child({listen, LRef, TPid, T}), - AS. +l([], Ref, T) -> + diameter_tcp_sup:start_child({listen, Ref, T}). %% get_addr/1 @@ -440,6 +460,18 @@ portnr(Sock) -> %% # handle_call/3 %% --------------------------------------------------------------------------- +handle_call({accept, SvcPid}, _From, #listener{service = P} = S) -> + {reply, ok, if not is_pid(P), is_pid(SvcPid) -> + monitor(process, SvcPid), + S#listener{service = SvcPid}; + true -> + S + end}; + +%% Transport is telling us of parent death. +handle_call({stop, _Pid} = Reason, _From, #monitor{} = S) -> + {stop, {shutdown, Reason}, ok, S}; + handle_call(_, _, State) -> {reply, nok, State}. @@ -461,8 +493,7 @@ handle_info(T, #listener{} = S) -> {noreply, #listener{} = l(T,S)}; handle_info(T, #monitor{} = S) -> - m(T,S), - x(T). + {noreply, #monitor{} = m(T,S)}. %% --------------------------------------------------------------------------- %% # code_change/3 @@ -478,6 +509,7 @@ code_change(_, State, _) -> terminate(_, _) -> ok. + %% --------------------------------------------------------------------------- putr(Key, Val) -> @@ -490,35 +522,63 @@ getr(Key) -> %% %% Transition monitor state. -%% Transport is telling us to die. -m({stop, TPid}, #monitor{transport = TPid}) -> - ok; +%% Outgoing message. +m(Msg, S) + when is_record(Msg, diameter_packet); + is_binary(Msg) -> + send(Msg, S), + S; -%% Transport has died. -m({'DOWN', _, process, TPid, _}, #monitor{transport = TPid}) -> - ok; +%% Transport has established a connection. Stop monitoring on the +%% parent so as not to die before a send from the transport. +m({start, TPid, T, Ack} = M, #monitor{transport = TPid} = S) -> + case T of + {Sock, Mod} -> + demonitor(S#monitor.parent, [flush]), + S#monitor{parent = false, + socket = Sock, + module = Mod, + ack = Ack}; + false -> %% monitor not sending + x(M) + end; -%% Transport parent has died. -m({'DOWN', _, process, Pid, _}, #monitor{parent = Pid, - transport = TPid}) -> - exit(TPid, {shutdown, parent}). +%% Transport is telling us to die. +m({stop, TPid} = T, #monitor{transport = TPid}) -> + x(T); + +%% Transport is telling us to die. +m({stop, TPid} = T, #monitor{transport = TPid}) -> + x(T); + +%% Transport is telling us that TLS has been negotiated after +%% capabilities exchange. +m({tls, SSock}, S) -> + S#monitor{socket = SSock, + module = ssl}; + +%% Transport or parent has died. +m({'DOWN', M, process, P, _} = T, #monitor{parent = MRef, + transport = TPid}) + when M == MRef; + P == TPid -> + x(T). %% l/2 %% %% Transition listener state. -%% An accepting transport is attaching. -l({accept, TPid}, #listener{count = N} = S) -> - monitor(process, TPid), - S#listener{count = N+1}; - -%% Accepting process has died. -l({'DOWN', _, process, _, _}, #listener{count = N} = S) -> - S#listener{count = N-1}; +%% Service process has died. +l({'DOWN', _, process, Pid, _} = T, #listener{service = Pid, + socket = Sock, + module = M}) -> + M:close(Sock), + x(T); %% Transport has been removed. -l({transport, remove, _} = T, #listener{socket = Sock}) -> - gen_tcp:close(Sock), +l({transport, remove, _} = T, #listener{socket = Sock, + module = M}) -> + M:close(Sock), x(T). %% t/2 @@ -537,21 +597,13 @@ t(T,S) -> %% transition/2 -%% Incoming message. +%% Incoming packets. transition({P, Sock, Bin}, #transport{socket = Sock, - ssl = B, - throttled = T} + ssl = B} = S) when P == ssl, true == B; P == tcp -> - false = T, %% assert - recv(Bin, S); - -%% Make a new throttling callback after a timeout. -transition(throttle, #transport{throttled = false}) -> - ok; -transition(throttle, S) -> - throttle(S); + recv(Bin, S#transport{active = false}); %% Capabilties exchange has decided on whether or not to run over TLS. transition({diameter, {tls, Ref, Type, B}}, #transport{parent = Pid} @@ -561,7 +613,7 @@ transition({diameter, {tls, Ref, Type, B}}, #transport{parent = Pid} = NS = tls_handshake(Type, B, S), Pid ! {diameter, {tls, Ref}}, - throttle(NS#transport{ssl = B}); + NS#transport{ssl = B}; transition({C, Sock}, #transport{socket = Sock, ssl = B}) @@ -577,8 +629,18 @@ transition({E, Sock, _Reason} = T, #transport{socket = Sock, ?ERROR({T,S}); %% Outgoing message. -transition({diameter, {send, Bin}}, S) -> - send(Bin, S); +transition({diameter, {send, Msg}}, #transport{} = S) -> + message(send, Msg, S); + +%% Monitor has sent an outgoing message. +transition(Msg, S) + when is_record(Msg, diameter_packet); + is_binary(Msg) -> + message(ack, Msg, S); + +%% Deferred actions from a message_cb. +transition({actions, Dir, Acts}, S) -> + actions(Acts, Dir, S); %% Request to close the transport connection. transition({diameter, {close, Pid}}, #transport{parent = Pid, @@ -598,8 +660,18 @@ transition({resolve_port, Pid}, #transport{socket = Sock, Pid ! portnr(M, Sock), ok; -%% Parent process has died. -transition({'DOWN', _, process, Pid, _}, #transport{parent = Pid}) -> +%% Parent process has died: call the monitor to not close the socket +%% during an ongoing send, but don't let it take forever. +transition({'DOWN', _, process, Pid, _}, #transport{parent = Pid, + send = MPid}) -> + false == MPid + orelse (ok == gen_server:call(MPid, {stop, self()}, 1000)) + orelse exit(MPid, {shutdown, parent}), + stop; + +%% Monitor process has died. +transition({'DOWN', _, process, MPid, _}, #transport{send = MPid}) + when is_pid(MPid) -> stop. %% Crash on anything unexpected. @@ -623,11 +695,13 @@ tls_handshake(_, true, #transport{ssl = false}) -> %% Capabilities exchange negotiated TLS: upgrade the connection. tls_handshake(Type, true, #transport{socket = Sock, module = M, - ssl = Opts} + ssl = Opts, + send = MPid} = S) -> {ok, SSock} = tls(Type, Sock, [{cb_info, ?TCP_CB(M)} | Opts]), Ref = getr(?REF_KEY), true = diameter_reg:add_new({?MODULE, Type, {Ref, SSock}}), + false == MPid orelse (MPid ! {tls, SSock}), %% tell the sender process S#transport{socket = SSock, module = ssl}; @@ -646,24 +720,15 @@ tls(accept, Sock, Opts) -> %% using Nagle. %% Receive packets until a full message is received, -recv(Bin, #transport{frag = Head, throttled = false} = S) -> +recv(Bin, #transport{frag = Head} = S) -> case rcv(Head, Bin) of - {Msg, B} -> - throttle(S#transport{frag = B, throttled = Msg}); - Frag -> - setopts(S), - start_fragment_timer(S#transport{frag = Frag, - flush = false}) + {Msg, B} -> %% have a complete message ... + message(recv, Msg, S#transport{frag = B}); + Frag -> %% read more on the socket + start_fragment_timer(setopts(S#transport{frag = Frag, + flush = false})) end. -%% recv/1 - -recv(#transport{throttled = false} = S) -> - recv(<<>>, S); - -recv(#transport{} = S) -> - S. - %% rcv/2 %% No previous fragment. @@ -723,13 +788,16 @@ recv1(Len, Bin) -> <<Msg:Len/binary, Rest/binary>> = Bin, {Msg, Rest}. -%% bin/1-2 +%% bin/2 bin(Head, Acc) -> list_to_binary([Head | lists:reverse(Acc)]). +%% bin/1 + bin({_, _, Head, Acc}) -> bin(Head, Acc); + bin(Bin) when is_binary(Bin) -> Bin. @@ -748,9 +816,7 @@ bin(Bin) %% also eventually lead to watchdog failover. %% No fragment to flush or not receiving messages. -flush(#transport{frag = Frag, throttled = B} = S) - when Frag == <<>>; - B /= false -> +flush(#transport{frag = <<>>} = S) -> S; %% Messages have been received since last timer expiry. @@ -758,9 +824,8 @@ flush(#transport{flush = false} = S) -> start_fragment_timer(S#transport{flush = true}); %% No messages since last expiry. -flush(#transport{frag = Frag, parent = Pid} = S) -> - diameter_peer:recv(Pid, bin(Frag)), - S#transport{frag = <<>>}. +flush(#transport{frag = Frag} = S) -> + message(recv, bin(Frag), S#transport{frag = <<>>}). %% start_fragment_timer/1 %% @@ -793,9 +858,27 @@ connect(Mod, Host, Port, Opts) -> %% send/2 -send(Bin, #transport{socket = Sock, - module = M}) -> - case send(M, Sock, Bin) of +send(Msg, #monitor{socket = Sock, module = M, transport = TPid, ack = B}) -> + send1(M, Sock, Msg), + B andalso (TPid ! Msg); + +send(Msg, #transport{socket = Sock, module = M, send = false} = S) -> + send1(M, Sock, Msg), + message(ack, Msg, S); + +%% Send from the monitor process to avoid deadlock if both the +%% receiver and the peer were to block in send. +send(Msg, #transport{send = Pid} = S) -> + Pid ! Msg, + S. + +%% send1/3 + +send1(Mod, Sock, #diameter_packet{bin = Bin}) -> + send1(Mod, Sock, Bin); + +send1(Mod, Sock, Bin) -> + case send(Mod, Sock, Bin) of ok -> ok; {error, Reason} -> @@ -822,120 +905,19 @@ setopts(M, Sock, Opts) -> %% setopts/1 -setopts(#transport{socket = Sock, module = M}) -> - setopts(M, Sock). - -%% setopts/2 - -setopts(M, Sock) -> +setopts(#transport{socket = Sock, + active = A, + recv = B, + module = M} + = S) + when B, not A -> case setopts(M, Sock, [{active, once}]) of - ok -> ok; - X -> x({setopts, M, Sock, X}) %% possibly on peer disconnect - end. - -%% throttle/1 - -%% Still collecting packets for a complete message: keep receiving. -throttle(#transport{throttled = false} = S) -> - recv(S); - -%% Decide whether to receive another, or whether to accept a message -%% that's been received. -throttle(#transport{throttle_cb = F, throttled = T} = S) -> - Res = cb(F, T), - - try throttle(Res, S) of - #transport{ssl = SB} = NS when is_boolean(SB) -> - throttle(defrag(NS)); - #transport{throttled = Msg} = NS when is_binary(Msg) -> - %% Initial incoming message when we might need to upgrade - %% to TLS: wait for reception of a tls tuple. - defrag(NS) - catch - #transport{} = NS -> - recv(NS) - end. - -%% cb/2 - -cb(false, _) -> - ok; - -cb(F, B) -> - diameter_lib:eval([F, true /= B andalso B]). - -%% throttle/2 - -%% Callback says to receive another message. -throttle(ok, #transport{throttled = true} = S) -> - throw(S#transport{throttled = false}); - -%% Callback says to accept a received message. -throttle(ok, #transport{parent = Pid, throttled = Msg} = S) - when is_binary(Msg) -> - diameter_peer:recv(Pid, Msg), - S; - -throttle({ok = T, F}, S) -> - throttle(T, S#transport{throttle_cb = F}); - -%% Callback says to accept a received message and acknowledged the -%% returned pid with a {request, Pid} message if a request pid is -%% spawned, a discard message otherwise. The latter does not mean that -%% the message was necessarily discarded: it could have been an -%% answer. -throttle(NPid, #transport{parent = Pid, throttled = Msg} = S) - when is_pid(NPid), is_binary(Msg) -> - diameter_peer:recv(Pid, {Msg, NPid}), - S; - -throttle({NPid, F}, #transport{throttled = Msg} = S) - when is_pid(NPid), is_binary(Msg) -> - throttle(NPid, S#transport{throttle_cb = F}); - -%% Callback to accept a received message says to discard it. -throttle(discard, #transport{throttled = Msg} = S) - when is_binary(Msg) -> - S; - -throttle({discard = T, F}, #transport{throttled = Msg} = S) - when is_binary(Msg) -> - throttle(T, S#transport{throttle_cb = F}); - -%% Callback to accept a received message says to answer it with the -%% supplied binary. -throttle(Bin, #transport{throttled = Msg} = S) - when is_binary(Bin), is_binary(Msg) -> - send(Bin, S), - S; - -throttle({Bin, F}, #transport{throttled = Msg} = S) - when is_binary(Bin), is_binary(Msg) -> - throttle(Bin, S#transport{throttle_cb = F}); - -%% Callback says to ask again in the specified number of milliseconds. -throttle({timeout, Tmo}, S) -> - erlang:send_after(Tmo, self(), throttle), - throw(S); - -throttle({timeout = T, Tmo, F}, S) -> - throttle({T, Tmo}, S#transport{throttle_cb = F}); - -throttle(T, #transport{throttle_cb = F}) -> - ?ERROR({invalid_return, T, F}). - -%% defrag/1 -%% -%% Try to extract another message from packets already read before -%% another throttling callback. + ok -> S#transport{active = true}; + X -> x({setopts, Sock, M, X}) %% possibly on peer disconnect + end; -defrag(#transport{frag = Head} = S) -> - case rcv(Head, <<>>) of - {Msg, B} -> - S#transport{throttled = Msg, frag = B}; - _ -> - S#transport{throttled = true} - end. +setopts(S) -> + S. %% portnr/2 @@ -970,3 +952,80 @@ getstat(gen_tcp, Sock) -> getstat(M, Sock) -> M:getstat(Sock). %% Note that ssl:getstat/1 doesn't yet exist in R15B01. + +%% A message_cb is invoked whenever a message is sent or received, or +%% to provide acknowledgement of a completed send or discarded +%% request. Ignoring possible extra arguments, calls are of the +%% following form. +%% +%% cb(recv, Msg) Receive a message into diameter? +%% cb(send, Msg) Send a message on the socket? +%% cb(ack, Msg) Acknowledgement of a completed send. +%% cb(ack, false) Acknowledgement of a discarded request. +%% +%% Msg will be binary() in a recv callback, but can be a +%% diameter_packet record in a send/ack callback if a recv/send +%% callback returns a record. Callbacks return a list of the following +%% form. +%% +%% [boolean() | send | recv | binary() | #diameter_packet{}] +%% +%% The atoms are meaningless by themselves, but say whether subsequent +%% messages are to be sent or received. A boolean says whether or not +%% to continue reading on the socket. Messages can be received even +%% after false is returned if these arrived in the same packet. A +%% leading recv or send is implicit on the corresponding callbacks. A +%% new callback can be returned as the tail of a returned list: any +%% value not of the aforementioned list type is interpreted as a +%% callback. + +%% message/3 + +message(send, false = M, S) -> + message(ack, M, S); + +message(ack, _, #transport{message_cb = false} = S) -> + S; + +message(Dir, Msg, #transport{message_cb = CB} = S) -> + recv(<<>>, actions(cb(CB, Dir, Msg), Dir, S)). + +%% actions/3 + +actions([], _, S) -> + S; + +actions([B | As], Dir, S) + when is_boolean(B) -> + actions(As, Dir, S#transport{recv = B}); + +actions([Dir | As], _, S) + when Dir == send; + Dir == recv -> + actions(As, Dir, S); + +actions([Msg | As], send = Dir, S) + when is_binary(Msg); + is_record(Msg, diameter_packet) -> + actions(As, Dir, send(Msg, S)); + +actions([Msg | As], recv = Dir, #transport{parent = Pid} = S) + when is_binary(Msg); + is_record(Msg, diameter_packet) -> + diameter_peer:recv(Pid, Msg), + actions(As, Dir, S); + +actions([{defer, Tmo, Acts} | As], Dir, S) -> + erlang:send_after(Tmo, self(), {actions, Dir, Acts}), + actions(As, Dir, S); + +actions(CB, _, S) -> + S#transport{message_cb = CB}. + +%% cb/3 + +cb(false, _, Msg) -> + [Msg]; + +cb(CB, Dir, Msg) -> + diameter_lib:eval([CB, Dir, Msg]). diff --git a/lib/diameter/test/diameter_capx_SUITE.erl b/lib/diameter/test/diameter_capx_SUITE.erl index ed6641b9fb..51b6c1d7f2 100644 --- a/lib/diameter/test/diameter_capx_SUITE.erl +++ b/lib/diameter/test/diameter_capx_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -384,7 +384,7 @@ load_dict(N) -> A3 = erl_anno:new(3), A4 = erl_anno:new(4), Forms = [{attribute, A1, module, Mod}, - {attribute, A2, compile, [export_all]}, + {attribute, A2, export, [{id,0}]}, {function, A3, id, 0, [{clause, A4, [], [], [{integer, A4, N}]}]}], {ok, Mod, Bin, []} = compile:forms(Forms, [return]), @@ -433,7 +433,7 @@ server_reject(Config, F, RC) -> ?fail({LRef, OH}) end. -%% cliient_closed/4 +%% client_closed/4 client_closed(Config, Host, F, RC) -> true = diameter:subscribe(?CLIENT), diff --git a/lib/diameter/test/diameter_codec_SUITE.erl b/lib/diameter/test/diameter_codec_SUITE.erl index 558ba3b848..9f08f49f9f 100644 --- a/lib/diameter/test/diameter_codec_SUITE.erl +++ b/lib/diameter/test/diameter_codec_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -31,6 +31,8 @@ -export([suite/0, all/0, groups/0, + init_per_suite/1, + end_per_suite/1, init_per_group/2, end_per_group/2, init_per_testcase/2, @@ -63,6 +65,12 @@ groups() -> grouped_error, failed_error]}]. +init_per_suite(Config) -> + Config. + +end_per_suite(_Config) -> + ok. + init_per_group(recode, Config) -> ok = diameter:start(), Config. @@ -277,7 +285,14 @@ recode(Msg) -> recode(Msg, diameter_gen_base_rfc6733). recode(#diameter_packet{} = Pkt, Dict) -> - diameter_codec:decode(Dict, diameter_codec:encode(Dict, Pkt)); + diameter_codec:decode(Dict, opts(Dict), diameter_codec:encode(Dict, Pkt)); recode(Msg, Dict) -> recode(#diameter_packet{msg = Msg}, Dict). + +opts(Mod) -> + #{dictionary => Mod, + string_decode => false, + strict_mbit => true, + rfc => 6733, + failed_avp => false}. diff --git a/lib/diameter/test/diameter_codec_SUITE_data/diameter_test_unknown.erl b/lib/diameter/test/diameter_codec_SUITE_data/diameter_test_unknown.erl index 50cc6e7eef..700910878c 100644 --- a/lib/diameter/test/diameter_codec_SUITE_data/diameter_test_unknown.erl +++ b/lib/diameter/test/diameter_codec_SUITE_data/diameter_test_unknown.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -59,7 +59,7 @@ enc(M, #diameter_packet{msg = Vs} = P) -> P#diameter_packet{msg = [M|Vs]}). run(M, Pkt) -> - dec(M, diameter_codec:decode(diameter_test_recv, Pkt)). + dec(M, diameter_codec:decode(diameter_test_recv, opts(M), Pkt)). %% Note that the recv dictionary defines neither XXX nor YYY. dec('AR', #diameter_packet @@ -75,3 +75,10 @@ dec('BR', #diameter_packet errors = [{5001, ?MANDATORY_XXX}, {5008, ?NOT_MANDATORY_YYY}]}) -> ok. + +opts(Mod) -> + #{dictionary => Mod, + string_decode => true, + strict_mbit => true, + rfc => 6733, + failed_avp => false}. diff --git a/lib/diameter/test/diameter_codec_test.erl b/lib/diameter/test/diameter_codec_test.erl index 37c41a1761..b548f85cb8 100644 --- a/lib/diameter/test/diameter_codec_test.erl +++ b/lib/diameter/test/diameter_codec_test.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -94,7 +94,7 @@ base(T) -> %% Ensure that 'zero' values encode only zeros. base(zero = T, F) -> - B = diameter_types:F(encode, T), + B = diameter_types:F(encode, T, opts()), B = z(B); %% Ensure that we can decode what we encode and vice-versa, and that @@ -106,7 +106,7 @@ base(decode, F) -> [] = run([[fun base_invalid/2, F, V] || V <- Is]). base_decode(F, Eq, Value) -> - d(fun(X,V) -> diameter_types:F(X,V) end, Eq, Value). + d(fun(X,V) -> diameter_types:F(X, V, opts()) end, Eq, Value). base_invalid(F, Value) -> try @@ -171,7 +171,7 @@ gen(M, avp_types, {Name, Code, Type, _Flags}) -> V = undefined /= VendorId, V = 0 /= Flags band 2#10000000, {Name, Type} = M:avp_name(Code, VendorId), - B = M:empty_value(Name), + B = M:empty_value(Name, #{module => M}), B = z(B), [] = avp_decode(M, Type, Name); @@ -207,10 +207,22 @@ avp_decode(Mod, Name, Type, Eq, Value) -> d(fun(X,V) -> avp(Mod, X, V, Name, Type) end, Eq, Value). avp(Mod, decode = X, V, Name, 'Grouped') -> - {Rec, _} = Mod:avp(X, V, Name), + {Rec, _} = Mod:avp(X, V, Name, opts(Mod)), Rec; -avp(Mod, X, V, Name, _) -> - Mod:avp(X, V, Name). +avp(Mod, decode = X, V, Name, _) -> + Mod:avp(X, V, Name, opts(Mod)); +avp(Mod, encode = X, V, Name, _) -> + iolist_to_binary(Mod:avp(X, V, Name, opts(Mod))). + +opts(Mod) -> + (opts())#{module => Mod, + dictionary => Mod}. + +opts() -> + #{string_decode => true, + strict_mbit => true, + rfc => 6733, + failed_avp => false}. %% v/1 @@ -257,8 +269,8 @@ arity(M, Name, AvpName, Rec) -> enum(M, Name, {_,E}) -> B = <<E:32>>, - B = M:avp(encode, E, Name), - E = M:avp(decode, B, Name). + B = M:avp(encode, E, Name, opts(M)), + E = M:avp(decode, B, Name, opts(M)). retag(import_avps) -> avp_types; retag(import_groups) -> grouped; @@ -280,7 +292,8 @@ d(F, Eq, V) -> end. z(B) -> - << <<0>> || <<_>> <= B >>. + Sz = size(B), + <<0:Sz/unit:8>>. %% values/1 %% diff --git a/lib/diameter/test/diameter_compiler_SUITE.erl b/lib/diameter/test/diameter_compiler_SUITE.erl index 7a9ac65ae3..73fe1ef6e0 100644 --- a/lib/diameter/test/diameter_compiler_SUITE.erl +++ b/lib/diameter/test/diameter_compiler_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -39,7 +39,7 @@ -export([dict/0]). %% fake dictionary module %% dictionary callbacks for flatten2/1 --export(['A1'/3, 'Unsigned32'/3]). +-export(['A1'/4, 'Unsigned32'/4]). -define(base, "base_rfc3588.dia"). -define(util, diameter_util). @@ -552,13 +552,13 @@ flatten2(_Config) -> T <- [encode, decode], M <- [M2, M3], Ref <- [make_ref()], - RC <- [M:avp(T, Ref, A)], + RC <- [M:avp(T, Ref, A, #{module => M})], RC /= {T, Ref}]. -'A1'(T, 'Unsigned32', Ref) -> +'A1'(T, 'Unsigned32', Ref, _Opts) -> {T, Ref}. -'Unsigned32'(T, 'A3', Ref) -> +'Unsigned32'(T, 'A3', Ref, _Opts) -> {T, Ref}. load_forms(Forms) -> diff --git a/lib/diameter/test/diameter_dict_SUITE.erl b/lib/diameter/test/diameter_dict_SUITE.erl deleted file mode 100644 index 4c1349f4eb..0000000000 --- a/lib/diameter/test/diameter_dict_SUITE.erl +++ /dev/null @@ -1,145 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% - -%% -%% Tests of the dict-like diameter_dict. -%% - --module(diameter_dict_SUITE). - --export([suite/0, - all/0, - groups/0]). - -%% testcases --export([append/1, - fetch/1, - fetch_keys/1, - filter/1, - find/1, - fold/1, - is_key/1, - map/1, - merge/1, - update/1, - update_counter/1]). - --include("diameter_ct.hrl"). - --define(dict, diameter_dict). --define(util, diameter_util). - -%% =========================================================================== - -suite() -> - [{timetrap, {seconds, 60}}]. - -all() -> - [{group, all}, - {group, all, [parallel]}]. - -groups() -> - [{all, [], tc()}]. - -tc() -> - [append, - fetch, - fetch_keys, - filter, - find, - fold, - is_key, - map, - merge, - update, - update_counter]. - -%% =========================================================================== - --define(KV100, [{N,[N]} || N <- lists:seq(1,100)]). - -append(_) -> - D = ?dict:append(k, v, ?dict:new()), - [{k,[v,v]}] = ?dict:to_list(?dict:append(k, v, D)). - -fetch(_) -> - D = ?dict:from_list(?KV100), - [50] = ?dict:fetch(50, D), - Ref = make_ref(), - Ref = try ?dict:fetch(Ref, D) catch _:_ -> Ref end. - -fetch_keys(_) -> - L = ?KV100, - D = ?dict:from_list(L), - L = [{N,[N]} || N <- lists:sort(?dict:fetch_keys(D))]. - -filter(_) -> - L = ?KV100, - F = fun(K,[_]) -> 0 == K rem 2 end, - D = ?dict:filter(F, ?dict:from_list(L)), - true = [T || {K,V} = T <- L, F(K,V)] == lists:sort(?dict:to_list(D)). - -find(_) -> - D = ?dict:from_list(?KV100), - {ok, [50]} = ?dict:find(50, D), - error = ?dict:find(make_ref(), D). - -fold(_) -> - L = ?KV100, - S = lists:sum([N || {N,_} <- L]), - S = ?dict:fold(fun(K,[_],A) -> K + A end, 0, ?dict:from_list(L)). - -is_key(_) -> - L = ?KV100, - D = ?dict:from_list(L), - true = lists:all(fun({N,_}) -> ?dict:is_key(N,D) end, L), - false = ?dict:is_key(make_ref(), D). - -map(_) -> - L = ?KV100, - F = fun(_,V) -> [N] = V, N*2 end, - D = ?dict:map(F, ?dict:from_list(L)), - M = [{K, F(K,V)} || {K,V} <- L], - M = lists:sort(?dict:to_list(D)). - -merge(_) -> - L = ?KV100, - F = fun(_,V1,V2) -> V1 ++ V2 end, - D = ?dict:merge(F, ?dict:from_list(L), ?dict:from_list(L)), - M = [{K, F(K,V,V)} || {K,V} <- L], - M = lists:sort(?dict:to_list(D)). - -update(_) -> - L = ?KV100, - F = fun([V]) -> 2*V end, - D = ?dict:update(50, F, ?dict:from_list(L)), - 100 = ?dict:fetch(50, D), - Ref = make_ref(), - Ref = try ?dict:update(Ref, F, D) catch _:_ -> Ref end, - [Ref] = ?dict:fetch(Ref, ?dict:update(Ref, - fun(_,_) -> ?ERROR(i_think_not) end, - [Ref], - D)). - -update_counter(_) -> - L = [{N,2*N} || {N,_} <- ?KV100], - D = ?dict:update_counter(50, 20, ?dict:from_list(L)), - 120 = ?dict:fetch(50,D), - 2 = ?dict:fetch(1,D). diff --git a/lib/diameter/test/diameter_dpr_SUITE.erl b/lib/diameter/test/diameter_dpr_SUITE.erl index 55702fbf78..779b919d3c 100644 --- a/lib/diameter/test/diameter_dpr_SUITE.erl +++ b/lib/diameter/test/diameter_dpr_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2012-2015. All Rights Reserved. +%% Copyright Ericsson AB 2012-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -27,6 +27,8 @@ -export([suite/0, all/0, groups/0, + init_per_suite/1, + end_per_suite/1, init_per_group/2, end_per_group/2]). @@ -56,16 +58,12 @@ %% Config for diameter:start_service/2. -define(SERVICE(Host), - [{'Origin-Host', Host}, + [{'Origin-Host', Host ++ ".erlang.org"}, {'Origin-Realm', "erlang.org"}, {'Host-IP-Address', [?ADDR]}, {'Vendor-Id', hd(Host)}, %% match this in disconnect/5 {'Product-Name', "OTP/diameter"}, - {'Acct-Application-Id', [0]}, - {restrict_connections, false}, - {application, [{dictionary, diameter_gen_base_rfc6733}, - {alias, common}, - {module, #diameter_callback{_ = false}}]}]). + {restrict_connections, false}]). %% Disconnect reasons that diameter passes as the first argument of a %% function configured as disconnect_cb. @@ -89,13 +87,19 @@ suite() -> [{timetrap, {seconds, 60}}]. all() -> - [start, send_dpr, stop | [{group, R} || R <- ?REASONS]]. + [{group, R} || R <- [client, server, uncommon | ?REASONS]]. %% The group determines how transports are terminated: by remove_transport, %% stop_service or application stop. groups() -> - Ts = tc(), - [{R, [], Ts} || R <- ?REASONS]. + [{R, [], [start, send_dpr, stop]} || R <- [client, server, uncommon]] + ++ [{R, [], Ts} || Ts <- [tc()], R <- ?REASONS]. + +init_per_suite(Config) -> %% not need, but a useful place to enable trace + Config. + +end_per_suite(_Config) -> + ok. init_per_group(Name, Config) -> [{group, Name} | Config]. @@ -107,29 +111,86 @@ tc() -> [start, connect, remove_transport, stop_service, check, stop]. %% =========================================================================== -%% start/stop testcases -start(_Config) -> - ok = diameter:start(), - ok = diameter:start_service(?SERVER, ?SERVICE(?SERVER)), - ok = diameter:start_service(?CLIENT, ?SERVICE(?CLIENT)). +%% start/1 -send_dpr(_Config) -> +start(Config) + when is_list(Config) -> + Grp = group(Config), + ok = diameter:start(), + ok = diameter:start_service(?SERVER, service(?SERVER, Grp)), + ok = diameter:start_service(?CLIENT, service(?CLIENT, Grp)). + +service(?SERVER = Svc, _) -> + ?SERVICE(Svc) + ++ [{'Acct-Application-Id', [0,3]}, + {application, [{dictionary, diameter_gen_base_rfc6733}, + {alias, common}, + {module, #diameter_callback{_ = false}}]}, + {application, [{dictionary, diameter_gen_acct_rfc6733}, + {alias, acct}, + {module, #diameter_callback{_ = false}}]}]; + +%% Client that receives a server DPR despite no explicit support for +%% Diameter common messages. +service(?CLIENT = Svc, server) -> + ?SERVICE(Svc) + ++ [{'Acct-Application-Id', [3]}, + {application, [{dictionary, diameter_gen_acct_rfc6733}, + {alias, acct}, + {module, #diameter_callback{_ = false}}]}]; + +%% Client that sends DPR despite advertised only the accounting +%% application. The dictionary is required for encode. +service(?CLIENT = Svc, uncommon) -> + ?SERVICE(Svc) + ++ [{'Acct-Application-Id', [3]}, + {application, [{dictionary, diameter_gen_base_rfc6733}, + {alias, common}, + {module, #diameter_callback{_ = false}}]}, + {application, [{dictionary, diameter_gen_acct_rfc6733}, + {alias, acct}, + {module, #diameter_callback{_ = false}}]}]; + +service(?CLIENT = Svc, _) -> + ?SERVICE(Svc) + ++ [{'Auth-Application-Id', [0]}, + {application, [{dictionary, diameter_gen_base_rfc6733}, + {alias, common}, + {module, #diameter_callback{_ = false}}]}]. + +%% send_dpr/1 + +send_dpr(Config) -> LRef = ?util:listen(?SERVER, tcp), Ref = ?util:connect(?CLIENT, tcp, LRef, [{dpa_timeout, 10000}]), + Svc = sender(group(Config)), + [Info] = diameter:service_info(Svc, connections), + {_, {TPid, _}} = lists:keyfind(peer, 1, Info), #diameter_base_DPA{'Result-Code' = 2001} - = diameter:call(?CLIENT, + = diameter:call(Svc, common, - ['DPR', {'Origin-Host', "CLIENT.erlang.org"}, - {'Origin-Realm', "erlang.org"}, - {'Disconnect-Cause', 0}]), - ok = receive %% endure the transport dies on DPA + ['DPR', {'Origin-Host', Svc ++ ".erlang.org"}, + {'Origin-Realm', "erlang.org"}, + {'Disconnect-Cause', 0}], + [{peer, TPid}]), + ok = receive %% ensure the transport dies on DPA #diameter_event{service = ?CLIENT, info = {down, Ref, _, _}} -> ok after 5000 -> erlang:process_info(self(), messages) end. +%% sender/1 + +sender(server) -> + ?SERVER; + +sender(_) -> + ?CLIENT. + +%% connect/1 + connect(Config) -> Pid = spawn(fun init/0), %% process for disconnect_cb to bang Grp = group(Config), @@ -138,16 +199,22 @@ connect(Config) -> || RCs <- ?RETURNS], ?util:write_priv(Config, config, [Pid | Refs]). +%% remove_transport/1 + %% Remove all the client transports only in the transport group. remove_transport(Config) -> transport == group(Config) andalso (ok = diameter:remove_transport(?CLIENT, true)). +%% stop_service/1 + %% Stop the service only in the service group. stop_service(Config) -> service == group(Config) andalso (ok = diameter:stop_service(?CLIENT)). +%% check/1 + %% Check for callbacks before diameter:stop/0, not the other way around %% for the timing reason explained below. check(Config) -> @@ -157,9 +224,13 @@ check(Config) -> Dict = receive {Pid, D} -> D end, %% get it check(Refs, ?RETURNS, Grp, Dict). %% check for callbacks +%% stop/1 + stop(_Config) -> ok = diameter:stop(). +%% =========================================================================== + %% Whether or not there are callbacks after diameter:stop() depends on %% timing as long as the server runs on the same node: a server %% transport could close the connection before the client has chance diff --git a/lib/diameter/test/diameter_examples_SUITE.erl b/lib/diameter/test/diameter_examples_SUITE.erl index e4ed2b227d..eb99f10fe6 100644 --- a/lib/diameter/test/diameter_examples_SUITE.erl +++ b/lib/diameter/test/diameter_examples_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2013-2015. All Rights Reserved. +%% Copyright Ericsson AB 2013-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -92,12 +92,10 @@ init_per_group(tcp = N, Config) -> [{group, N} | Config]; init_per_group(sctp = N, Config) -> - case gen_sctp:open() of - {ok, Sock} -> - gen_sctp:close(Sock), + case ?util:have_sctp() of + true -> [{group, N} | Config]; - {error, E} when E == eprotonosupport; - E == esocktnosupport -> %% fail on any other reason + false-> {skip, no_sctp} end. diff --git a/lib/diameter/test/diameter_gen_sctp_SUITE.erl b/lib/diameter/test/diameter_gen_sctp_SUITE.erl index 79db39ca45..ccee6baec1 100644 --- a/lib/diameter/test/diameter_gen_sctp_SUITE.erl +++ b/lib/diameter/test/diameter_gen_sctp_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -33,8 +33,8 @@ end_per_suite/1]). %% testcases --export([send_not_from_controlling_process/1, - send_from_multiple_clients/1, send_from_multiple_clients/0, +-export([send_one_from_many/1, send_one_from_many/0, + send_many_from_one/1, send_many_from_one/0, receive_what_was_sent/1]). -include_lib("kernel/include/inet_sctp.hrl"). @@ -45,16 +45,24 @@ %% Open sockets on the loopback address. -define(ADDR, {127,0,0,1}). -%% Snooze, nap, siesta. --define(SLEEP(T), receive after T -> ok end). - %% An indescribably long number of milliseconds after which everthing %% that should have happened has. -define(FOREVER, 2000). +%% How many milliseconds to tolerate between the fastest and slowest +%% turnaround times. +-define(VARIANCE, 100). + %% The first byte in each message we send as a simple guard against %% not receiving what was sent. --define(MAGIC, 42). +-define(MAGIC, 0). + +%% Requested number of inbound/outbound streams. +-define(STREAMS, 5). + +%% Success for send_multiple. Match in each testcase rather than in +%% send_multiple itself for a better failure in common_test. +-define(OK, {_, true, _, [true, true], [], _}). %% =========================================================================== @@ -62,8 +70,8 @@ suite() -> [{timetrap, {seconds, 10}}]. all() -> - [send_not_from_controlling_process, - send_from_multiple_clients, + [send_one_from_many, + send_many_from_one, receive_what_was_sent]. init_per_suite(Config) -> @@ -81,130 +89,37 @@ end_per_suite(_Config) -> %% =========================================================================== -%% send_not_from_controlling_process/1 -%% -%% This testcase failing shows gen_sctp:send/4 hanging when called -%% outside the controlling process of the socket in question. - -send_not_from_controlling_process(_) -> - Pids = send_not_from_controlling_process(), - ?SLEEP(?FOREVER), - try - [] = [{P,I} || P <- Pids, I <- [process_info(P)], I /= undefined] - after - lists:foreach(fun(P) -> exit(P, kill) end, Pids) - end. - -%% send_not_from_controlling_process/0 -%% -%% Returns the pids of three spawned processes: a listening process, a -%% connecting process and a sending process. -%% -%% The expected behaviour is that all three processes exit: -%% -%% - The listening process exits upon receiving an SCTP message -%% sent by the sending process. -%% - The connecting process exits upon listening process exit. -%% - The sending process exits upon gen_sctp:send/4 return. -%% -%% The observed behaviour is that all three processes remain alive -%% indefinitely: -%% -%% - The listening process never receives the SCTP message sent -%% by the sending process. -%% - The connecting process has an inet_reply message in its mailbox -%% as a consequence of the call to gen_sctp:send/4 call from the -%% sending process. -%% - The call to gen_sctp:send/4 in the sending process doesn't return, -%% hanging in prim_inet:getopts/2. - -send_not_from_controlling_process() -> - FPid = self(), - {L, MRef} = spawn_monitor(fun() -> listen(FPid) end), - receive - {?MODULE, C, S} -> - demonitor(MRef, [flush]), - [L,C,S]; - {'DOWN', MRef, process, _, _} = T -> - error(T) - end. - -%% listen/1 - -listen(FPid) -> - {ok, Sock} = open(), - ok = gen_sctp:listen(Sock, true), - {ok, PortNr} = inet:port(Sock), - LPid = self(), - spawn(fun() -> connect1(PortNr, FPid, LPid) end), %% connecting process - Id = assoc(Sock), - recv(Sock, Id). - -%% connect1/3 - -connect1(PortNr, FPid, LPid) -> - {ok, Sock} = open(), - ok = gen_sctp:connect_init(Sock, ?ADDR, PortNr, []), - Id = assoc(Sock), - FPid ! {?MODULE, - self(), - spawn(fun() -> send(Sock, Id) end)}, %% sending process - MRef = monitor(process, LPid), - down(MRef). %% Waits with this as current_function. - -%% down/1 - -down(MRef) -> - receive {'DOWN', MRef, process, _, Reason} -> Reason end. - -%% send/2 - -send(Sock, Id) -> - ok = gen_sctp:send(Sock, Id, 0, <<0:32>>). - -%% =========================================================================== - -%% send_from_multiple_clients/0 +%% send_one_from_many/0 %% %% Demonstrates sluggish delivery of messages. -send_from_multiple_clients() -> - [{timetrap, {seconds, 60}}]. +send_one_from_many() -> + [{timetrap, {seconds, 30}}]. -send_from_multiple_clients(_) -> - {S, Rs} = T = send_from_multiple_clients(8, 1024), - Max = ?FOREVER*1000, - {false, [], _} = {Max < S, - Rs -- [OI || {O,_} = OI <- Rs, is_integer(O)], - T}. +send_one_from_many(_) -> + ?OK = send_multiple(128, 1, 1024). -%% send_from_multiple_clients/2 +%% send_one_from_many/2 %% %% Opens a listening socket and then spawns a specified number of -%% processes, each of which connects to the listening socket. Each -%% connecting process then sends a message, whose size in bytes is -%% passed as an argument, the listening process sends a reply -%% containing the time at which the message was received, and the -%% connecting process then exits upon reception of this reply. +%% processes, each of which connects, sends a message, receives a +%% reply, and exits. %% %% Returns the elapsed time for all connecting process to exit -%% together with a list of exit reasons for the connecting processes. -%% In the successful case a connecting process exits with the -%% outbound/inbound transit times for the sent/received message as -%% reason. +%% together with a list of exit reasons. In the successful case a +%% connecting process exits with the outbound/inbound transit times +%% for the sent/received message as reason. %% %% The observed behaviour is that some outbound messages (that is, %% from a connecting process to the listening process) can take an %% unexpectedly long time to complete their journey. The more -%% connecting processes, the longer the possible delay it seems. +%% connecting processes, the longer it can take it seems. %% -%% eg. (With F = fun send_from_multiple_clients/2.) -%% -%% 5> F(2, 1024). +%% eg. 5> send_one_from_many(2, 1024). %% {875,[{128,116},{113,139}]} -%% 6> F(4, 1024). +%% 6> send_one_from_many(4, 1024). %% {2995290,[{2994022,250},{2994071,80},{200,130},{211,113}]} -%% 7> F(8, 1024). +%% 7> send_one_from_many(8, 1024). %% {8997461,[{8996161,116}, %% {2996471,86}, %% {2996278,116}, @@ -213,7 +128,7 @@ send_from_multiple_clients(_) -> %% {213,159}, %% {373,173}, %% {376,118}]} -%% 8> F(8, 1024). +%% 8> send_one_from_many(8, 1024). %% {21001891,[{20999968,128}, %% {8997891,172}, %% {8997927,91}, @@ -223,120 +138,279 @@ send_from_multiple_clients(_) -> %% {117,98}, %% {149,125}]} %% -%% This turns out to have been due to SCTP resends as a consequence of -%% the listener having an insufficient recbuf. Increasing the size -%% solves the problem. -%% - -send_from_multiple_clients(N, Sz) - when is_integer(N), 0 < N, is_integer(Sz), 0 < Sz -> - timer:tc(fun listen/2, [N, <<?MAGIC, 0:Sz/unit:8>>]). -%% listen/2 - -listen(N, Bin) -> +send_multiple(Clients, Msgs, Sz) + when is_integer(Clients), 0 < Clients, + is_integer(Msgs), 0 < Msgs, + is_integer(Sz), 0 < Sz -> + T0 = diameter_lib:now(), + {S, Res} = timer:tc(fun listen/3, [Clients, Msgs, Sz]), + report(T0, Res), + Ts = lists:append(Res), + Outgoing = [DT || {_,{_,_,DT},{_,_,_},_} <- Ts], + Incoming = [DT || {_,{_,_,_},{_,_,DT},_} <- Ts], + Diffs = [lists:max(L) - lists:min(L) || L <- [Outgoing, Incoming]], + {S, + S < ?FOREVER*1000, + Diffs, + [D < V || V <- [?VARIANCE*1000], D <- Diffs], + [T || T <- Ts, [] == [T || {_,{_,_,_},{_,_,_},_} <- [T]]], + Res}. + +%% listen/3 + +listen(Clients, Msgs, Sz) -> {ok, Sock} = open(), ok = gen_sctp:listen(Sock, true), {ok, PortNr} = inet:port(Sock), %% Spawn a middleman that in turn spawns N connecting processes, %% collects a list of exit reasons and then exits with the list as - %% reason. loop/3 returns when we receive this list from the + %% reason. accept/2 returns when we receive this list from the %% middleman's 'DOWN'. Self = self(), - Fun = fun() -> exit(connect2(Self, PortNr, Bin)) end, - {_, MRef} = spawn_monitor(fun() -> exit(fold(N, Fun)) end), - loop(Sock, MRef, Bin). + Fun = fun() -> exit(client(Self, PortNr, Msgs, Sz)) end, %% start clients + {_, MRef} = spawn_monitor(fun() -> exit(clients(Clients, Fun)) end), + accept_loop(Sock, MRef). -%% fold/2 +%% fclients/2 %% %% Spawn N processes and collect their exit reasons in a list. -fold(N, Fun) -> +clients(N, Fun) -> start(N, Fun), acc(N, []). +%% start/2 + start(0, _) -> ok; + start(N, Fun) -> spawn_monitor(Fun), start(N-1, Fun). +%% acc/2 + acc(0, Acc) -> Acc; + acc(N, Acc) -> receive {'DOWN', _MRef, process, _, RC} -> acc(N-1, [RC | Acc]) end. -%% loop/3 +%% accept_loop/2 -loop(Sock, MRef, Bin) -> +accept_loop(Sock, MRef) -> + ok = inet:setopts(Sock, [{active, once}]), receive - ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], B}) - when is_binary(B) -> - Sz = size(Bin), - {Sz, Bin} = {size(B), B}, %% assert - ok = send(Sock, Id, mark(Bin)), - loop(Sock, MRef, Bin); + ?SCTP(Sock, {_, #sctp_assoc_change{state = comm_up, + outbound_streams = OS, + assoc_id = Id}}) -> + Self = self(), + TPid = spawn(fun() -> assoc(monitor(process, Self), Id, OS) end), + NewSock = peeloff(Sock, Id, TPid), + TPid ! {peeloff, NewSock}, + accept_loop(Sock, MRef); ?SCTP(Sock, _) -> - loop(Sock, MRef, Bin); + accept_loop(Sock, MRef); {'DOWN', MRef, process, _, Reason} -> - Reason + Reason; + T -> + error(T) end. -%% connect2/3 +%% assoc/3 +%% +%% Server process that answers incoming messages as long as the parent +%% lives. + +assoc(MRef, _Id, OS) + when is_reference(MRef) -> + {peeloff, Sock} = receive T -> T end, + recv_loop(Sock, false, sender(Sock, false, OS), MRef). + +%% recv_loop/4 + +recv_loop(Sock, Id, Pid, MRef) -> + ok = inet:setopts(Sock, [{active, once}]), + recv(Sock, Id, Pid, MRef, receive T -> T end). + +%% recv/5 + +%% Association id can change on a peeloff socket on some versions of +%% Solaris. +recv(Sock, + false, + Pid, + MRef, + ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], _}) + = T) -> + Pid ! {assoc_id, Id}, + recv(Sock, Id, Pid, MRef, T); + +recv(Sock, Id, Pid, MRef, ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = I}], B})) + when is_binary(B) -> + T2 = diameter_lib:now(), + Id = I, %% assert + <<?MAGIC, Bin/binary>> = B, %% assert + {[_,_,_,Sz] = L, Bytes} = unmark(Bin), + Sz = size(Bin) - Bytes, %% assert + <<_:Bytes/binary, Body:Sz/binary>> = Bin, + send(Pid, [T2|L], Body), %% answer + recv_loop(Sock, Id, Pid, MRef); + +recv(Sock, Id, Pid, MRef, ?SCTP(Sock, _)) -> + recv_loop(Sock, Id, Pid, MRef); + +recv(_, _, _, MRef, {'DOWN', MRef, process, _, Reason}) -> + Reason; + +recv(_, _, _, _, T) -> + error(T). -connect2(Pid, PortNr, Bin) -> - monitor(process, Pid), +%% send/3 - {ok, Sock} = open(), - ok = gen_sctp:connect_init(Sock, ?ADDR, PortNr, []), - Id = assoc(Sock), +send(Pid, Header, Body) -> + Pid ! {send, Header, Body}. - %% T1 = time before send - %% T2 = time after listening process received our message - %% T3 = time after reply is received +%% sender/3 +%% +%% Start a process that sends, so as not to block the controlling process. - T1 = diameter_lib:now(), - ok = send(Sock, Id, Bin), - T2 = unmark(recv(Sock, Id)), - T3 = diameter_lib:now(), - {diameter_lib:micro_diff(T2, T1), %% Outbound - diameter_lib:micro_diff(T3, T2)}. %% Inbound +sender(Sock, Id, OS) -> + Pid = self(), + spawn(fun() -> send_loop(Sock, Id, OS, 1, monitor(process, Pid)) end). -%% recv/2 +%% send_loop/5 -recv(Sock, Id) -> +send_loop(Sock, Id, OS, N, MRef) -> receive - ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = I}], Bin}) - when is_binary(Bin) -> - Id = I, %% assert - Bin; - ?SCTP(S, _) -> - Sock = S, %% assert - recv(Sock, Id); + {assoc_id, I} -> + send_loop(Sock, I, OS, N, MRef); + {send, L, Body} -> + Stream = N rem OS, + ok = send(Sock, Id, Stream, mark(Body, [N, Stream | L])), + send_loop(Sock, Id, OS, N+1, MRef); + {'DOWN', MRef, process, _, _} = T -> + T; T -> - exit(T) + error(T) end. -%% send/3 +%% peeloff/3 + +peeloff(LSock, Id, TPid) -> + {ok, Sock} = gen_sctp:peeloff(LSock, Id), + ok = gen_sctp:controlling_process(Sock, TPid), + Sock. + +%% client/4 + +client(Pid, PortNr, Msgs, Sz) -> + monitor(process, Pid), + {ok, Sock} = open(), + ok = gen_sctp:connect_init(Sock, ?ADDR, PortNr, []), + recv_loop(Sock, Msgs, Sz). -send(Sock, Id, Bin) -> - gen_sctp:send(Sock, Id, 0, Bin). +%% recv_loop/3 -%% mark/1 +recv_loop(_, 0, T) -> + [_,_|Acc] = T, + Acc; + +recv_loop(Sock, Msgs, T) -> + ok = inet:setopts(Sock, [{active, once}]), + {I, NewT} = recv(Sock, Msgs, T, receive X -> X end), + recv_loop(Sock, Msgs - I, NewT). + +%% recv/4 + +recv(Sock, Msgs, Sz, ?SCTP(Sock, {_, #sctp_assoc_change{} = A})) -> + #sctp_assoc_change{state = comm_up, %% assert + assoc_id = Id, + outbound_streams = OS} + = A, + true = is_integer(Sz), %% assert + send_n(Msgs, sender(Sock, Id, OS), Sz), + {0, [Id, OS]}; + +recv(Sock, _, T, ?SCTP(Sock, {[#sctp_sndrcvinfo{assoc_id = Id}], Bin})) -> + T4 = diameter_lib:now(), + [Id, OS | Acc] = T, + {1, [Id, OS, stat(T4, Bin) | Acc]}; + +recv(Sock, _, T, ?SCTP(Sock, _)) -> + {0, [_,_|_] = T}; + +recv(_, _, _, T) -> + error(T). + +%% send_n/3 +%% +%% Send messages to the server from dedicated processes. + +send_n(0, _, _) -> + ok; -mark(Bin) -> - Info = term_to_binary(diameter_lib:now()), +send_n(N, Pid, Sz) -> + M = rand:uniform(255), + send(Pid, [Sz], binary:copy(<<M>>, Sz)), + send_n(N-1, Pid, Sz). + +%% send/4 + +send(Sock, Id, Stream, Bin) -> + case gen_sctp:send(Sock, Id, Stream, <<?MAGIC, Bin/binary>>) of + {error, eagain} -> + send(Sock, Id, Stream, Bin); + RC -> + RC + end. + +%% stat/2 + +stat(T4, <<?MAGIC, Bin/binary>>) -> + %% T1 = time at send + %% T2 = time at reception by server + %% T3 = time at reception by server's sender + %% T4 = time at reception of answer + + {[T3,NI,SI,T2,T1,NO,SO,Sz], Bytes} = unmark(Bin), + + Sz = size(Bin) - Bytes, %% assert + + {T1, + {NO, SO, diameter_lib:micro_diff(T2, T1)}, %% Outbound + {NI, SI, diameter_lib:micro_diff(T4, T3)}, %% Inbound + T4}. + +%% mark/2 + +mark(Bin, T) -> + Info = term_to_binary([diameter_lib:now() | T]), <<Info/binary, Bin/binary>>. %% unmark/1 unmark(Bin) -> - binary_to_term(Bin). + T = binary_to_term(Bin), + {T, size(term_to_binary(T))}. + +%% =========================================================================== + +%% send_many_from_one/0 +%% +%% Demonstrates sluggish delivery of messages. + +send_many_from_one() -> + [{timetrap, {seconds, 30}}]. + +send_many_from_one(_) -> + ?OK = send_multiple(1, 128, 1024). %% =========================================================================== @@ -345,7 +419,7 @@ unmark(Bin) -> %% Demonstrates reception of a message that differs from that sent. receive_what_was_sent(_Config) -> - send_from_multiple_clients(1, 1024*32). %% fails + ?OK = send_multiple(1, 1, 1024*32). %% =========================================================================== @@ -357,16 +431,23 @@ open() -> %% open/1 open(Opts) -> - gen_sctp:open([{ip, ?ADDR}, {port, 0}, {active, true}, binary, + gen_sctp:open([{ip, ?ADDR}, {port, 0}, {active, false}, binary, + {sctp_initmsg, #sctp_initmsg{num_ostreams = ?STREAMS, + max_instreams = ?STREAMS}}, {recbuf, 1 bsl 16}, {sndbuf, 1 bsl 16} | Opts]). -%% assoc/1 +%% report/2 -assoc(Sock) -> - receive - ?SCTP(Sock, {_, #sctp_assoc_change{state = S, - assoc_id = Id}}) -> - comm_up = S, %% assert - Id - end. +report(T0, Ts) -> + ct:pal("~p~n", [lists:sort([sort([{diameter_lib:micro_diff(T1,T0), + OT, + IT, + diameter_lib:micro_diff(T4,T0)} + || {T1,OT,IT,T4} <- L]) + || L <- Ts])]). + +%% sort/1 + +sort(L) -> + lists:sort(fun({_,{N,_,_},_,_}, {_,{M,_,_},_,_}) -> N =< M end, L). diff --git a/lib/diameter/test/diameter_gen_tcp_SUITE.erl b/lib/diameter/test/diameter_gen_tcp_SUITE.erl index 2be2cf4b35..db42ea813e 100644 --- a/lib/diameter/test/diameter_gen_tcp_SUITE.erl +++ b/lib/diameter/test/diameter_gen_tcp_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2014-2015. All Rights Reserved. +%% Copyright Ericsson AB 2014-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -54,7 +54,7 @@ all() -> send_long(_) -> {Sock, SendF} = connection(), - B = list_to_binary(lists:duplicate(1 bsl 20, $X)), + B = binary:copy(<<$X>>, 1 bsl 20), ok = SendF(B), B = recv(Sock, size(B), []). diff --git a/lib/diameter/test/diameter_pool_SUITE.erl b/lib/diameter/test/diameter_pool_SUITE.erl index eadb354a1d..97c16940ff 100644 --- a/lib/diameter/test/diameter_pool_SUITE.erl +++ b/lib/diameter/test/diameter_pool_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2015. All Rights Reserved. +%% Copyright Ericsson AB 2015-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -115,7 +115,7 @@ connect(ClientProt, ServerProt) -> %% 'up' events. (Although it's likely.) sleep(), {9,5} = count("server", LRef, accept), %% 5 connections + 4 accepting - %% Ensure ther are still the expected number of accepting transports + %% Ensure there are still the expected number of accepting transports %% after stopping the client service. ok = diameter:stop_service("client"), sleep(), diff --git a/lib/diameter/test/diameter_relay_SUITE.erl b/lib/diameter/test/diameter_relay_SUITE.erl index b5e520e642..9de5cbe685 100644 --- a/lib/diameter/test/diameter_relay_SUITE.erl +++ b/lib/diameter/test/diameter_relay_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -302,7 +302,7 @@ stats(?RELAY1, L) -> %% RAR x 2 (send_timeout_[12]) {{{0,257,0},recv},3}, %% CEA {{{0,257,0},send},1}, %% " - {{{0,257,1},recv},1}, %% CER + {{{0,257,1},recv},1}, %% CER {{{0,257,1},send},3}, %% " {{{relay,0},recv,{'Result-Code',2001}},2}, %% STA x 2 (send[34]) {{{relay,0},recv,{'Result-Code',3005}},1}, %% ASA (send_loop) diff --git a/lib/diameter/test/diameter_traffic_SUITE.erl b/lib/diameter/test/diameter_traffic_SUITE.erl index 6f3a4801ee..84b41f14b7 100644 --- a/lib/diameter/test/diameter_traffic_SUITE.erl +++ b/lib/diameter/test/diameter_traffic_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -27,6 +27,8 @@ -export([suite/0, all/0, groups/0, + init_per_suite/1, + end_per_suite/1, init_per_group/2, end_per_group/2, init_per_testcase/2, @@ -90,7 +92,6 @@ send_multiple_filters_2/1, send_multiple_filters_3/1, send_anything/1, - outstanding/1, remove_transports/1, empty/1, stop_services/1, @@ -106,6 +107,9 @@ handle_error/6, handle_request/3]). +%% diameter_{tcp,sctp} callbacks +-export([message/3]). + -include("diameter.hrl"). -include("diameter_gen_base_rfc3588.hrl"). -include("diameter_gen_base_accounting.hrl"). @@ -145,21 +149,29 @@ %% Whether to decode stringish Diameter types to strings, or leave %% them as binary. --define(STRING_DECODES, [true, false]). +-define(STRING_DECODES, [false, true]). %% Which transport protocol to use. -define(TRANSPORTS, [tcp, sctp]). +%% Send from a dedicated process? +-define(SENDERS, [true, false]). + +%% Message callbacks from diameter_{tcp,sctp}? +-define(CALLBACKS, [true, false]). + -record(group, {transport, + strings, client_service, client_encoding, client_dict0, - client_strings, + client_sender, server_service, server_encoding, server_container, - server_strings}). + server_sender, + server_throttle}). %% Not really what we should be setting unless the message is sent in %% the common application but diameter doesn't care. @@ -190,8 +202,7 @@ {'Acct-Application-Id', [?DIAMETER_APP_ID_ACCOUNTING]}, {restrict_connections, false}, {string_decode, Decode}, - {incoming_maxlen, 1 bsl 21}, - {spawn_opt, [{min_heap_size, 5000}]} + {incoming_maxlen, 1 bsl 21} | [{application, [{dictionary, D}, {module, ?MODULE}, {answer_errors, callback}]} @@ -243,79 +254,128 @@ suite() -> [{timetrap, {seconds, 10}}]. all() -> - [start, result_codes, {group, traffic}, outstanding, empty, stop]. + [start, result_codes, {group, traffic}, empty, stop]. groups() -> - Ts = tc(), - Sctp = ?util:have_sctp(), - [{?util:name([R,D,A,C]), [parallel], Ts} || R <- ?ENCODINGS, - D <- ?RFCS, - A <- ?ENCODINGS, - C <- ?CONTAINERS] + [{P, [P], Ts} || Ts <- [tc(tc())], P <- [shuffle, parallel]] ++ - [{?util:name([T,R,D,A,C,SD,CD]), + [{?util:name([T,R,D,A,C,S,SS,ST,CS]), [], - [start_services, - add_transports, - result_codes, - {group, ?util:name([R,D,A,C])}, - remove_transports, - stop_services]} + [{group, if S -> shuffle; not S -> parallel end}]} || T <- ?TRANSPORTS, - T /= sctp orelse Sctp, R <- ?ENCODINGS, D <- ?RFCS, A <- ?ENCODINGS, C <- ?CONTAINERS, - SD <- ?STRING_DECODES, - CD <- ?STRING_DECODES] + S <- ?STRING_DECODES, + SS <- ?SENDERS, + ST <- ?CALLBACKS, + CS <- ?SENDERS] ++ - [{traffic, [], [{group, ?util:name([T,R,D,A,C,SD,CD])} - || T <- ?TRANSPORTS, - T /= sctp orelse Sctp, - R <- ?ENCODINGS, - D <- ?RFCS, - A <- ?ENCODINGS, - C <- ?CONTAINERS, - SD <- ?STRING_DECODES, - CD <- ?STRING_DECODES]}]. + [{T, [], groups([[T,R,D,A,C,S,SS,ST,CS] + || R <- ?ENCODINGS, + D <- ?RFCS, + A <- ?ENCODINGS, + C <- ?CONTAINERS, + S <- ?STRING_DECODES, + SS <- ?SENDERS, + ST <- ?CALLBACKS, + CS <- ?SENDERS, + SS orelse CS])} %% avoid deadlock + || T <- ?TRANSPORTS] + ++ + [{traffic, [], [{group, T} || T <- ?TRANSPORTS]}]. + +%groups(_) -> %% debug +% Name = [sctp,record,rfc6733,record,pkt,false,false,false,false], +% [{group, ?util:name(Name)}]; +groups(Names) -> + [{group, ?util:name(L)} || L <- Names]. + +%tc([N|_]) -> %% debug +% [N]; +tc(L) -> + L. + +%% -------------------- + +init_per_suite(Config) -> + [{sctp, ?util:have_sctp()} | Config]. + +end_per_suite(_Config) -> + ok. + +%% -------------------- + +init_per_group(Name, Config) + when Name == shuffle; + Name == parallel -> + start_services(Config), + add_transports(Config); + +init_per_group(sctp = Name, Config) -> + {_, Sctp} = lists:keyfind(Name, 1, Config), + if Sctp -> + Config; + true -> + {skip, Name} + end; init_per_group(Name, Config) -> case ?util:name(Name) of - [T,R,D,A,C,SD,CD] -> + [T,R,D,A,C,S,SS,ST,CS] -> G = #group{transport = T, + strings = S, client_service = [$C|?util:unique_string()], client_encoding = R, client_dict0 = dict0(D), - client_strings = CD, + client_sender = CS, server_service = [$S|?util:unique_string()], server_encoding = A, server_container = C, - server_strings = SD}, - [{group, G} | Config]; + server_sender = SS, + server_throttle = ST}, + %% Limit the number of testcase, since the number of + %% groups is large. + All = ?util:scramble(tc()), + TCs = lists:sublist(All, rand:uniform(32)), + [{group, G}, {runlist, TCs} | Config]; _ -> Config end. +end_per_group(Name, Config) + when Name == shuffle; + Name == parallel -> + remove_transports(Config), + stop_services(Config); + end_per_group(_, _) -> ok. +%% -------------------- + %% Skip testcases that can reasonably fail under SCTP. init_per_testcase(Name, Config) -> - case [skip || #group{transport = sctp} - <- [proplists:get_value(group, Config)], - send_maxlen == Name - orelse send_long == Name] + TCs = proplists:get_value(runlist, Config, []), + Run = [] == TCs orelse lists:member(Name, TCs), + case [G || #group{transport = sctp} = G + <- [proplists:get_value(group, Config)]] of - [skip] -> + [_] when Name == send_maxlen; + Name == send_long -> {skip, sctp}; - [] -> + _ when not Run -> + {skip, random}; + _ -> [{testcase, Name} | Config] end. end_per_testcase(_, _) -> ok. +%% -------------------- + %% Testcases to run when services are started and connections %% established. tc() -> @@ -380,28 +440,34 @@ start(_Config) -> ok = diameter:start(). start_services(Config) -> - #group{client_service = CN, - client_strings = CD, - server_service = SN, - server_strings = SD} + #group{strings = S, + client_service = CN, + server_service = SN} = group(Config), - ok = diameter:start_service(SN, ?SERVICE(SN, SD)), + ok = diameter:start_service(SN, ?SERVICE(SN, S)), ok = diameter:start_service(CN, [{sequence, ?CLIENT_MASK} - | ?SERVICE(CN, CD)]). + | ?SERVICE(CN, S)]). add_transports(Config) -> #group{transport = T, client_service = CN, - server_service = SN} - = group(Config), + client_sender = CS, + server_service = SN, + server_sender = SS, + server_throttle = ST} + = group(Config), LRef = ?util:listen(SN, - T, + [T, + {sender, SS}, + {message_cb, ST andalso {?MODULE, message, [4]}} + | [{packet, hd(?util:scramble([false, raw]))} + || T == sctp andalso CS]], [{capabilities_cb, fun capx/2}, {pool_size, 8}, - {spawn_opt, [{min_heap_size, 8096}]}, - {applications, apps(rfc3588)}]), + {applications, apps(rfc3588)}] + ++ [{spawn_opt, {erlang, spawn, []}} || CS]), Cs = [?util:connect(CN, - T, + [T, {sender, CS}], LRef, [{id, Id}, {capabilities, [{'Origin-State-Id', origin(Id)}]}, @@ -418,11 +484,6 @@ apps(D0) -> D = dict0(D0), [acct(D), D]. -%% Ensure there are no outstanding requests in request table. -outstanding(_Config) -> - [] = [T || T <- ets:tab2list(diameter_request), - is_atom(element(1,T))]. - remove_transports(Config) -> #group{client_service = CN, server_service = SN} @@ -692,14 +753,14 @@ send_unexpected_mandatory(Config) -> %% Send something long that will be fragmented by TCP. send_long(Config) -> Req = ['STR', {'Termination-Cause', ?LOGOUT}, - {'User-Name', [lists:duplicate(1 bsl 20, $X)]}], + {'User-Name', [binary:copy(<<$X>>, 1 bsl 20)]}], ['STA', {'Session-Id', _}, {'Result-Code', ?SUCCESS} | _] = call(Config, Req). %% Send something longer than the configure incoming_maxlen. send_maxlen(Config) -> Req = ['STR', {'Termination-Cause', ?LOGOUT}, - {'User-Name', [lists:duplicate(1 bsl 21, $X)]}], + {'User-Name', [binary:copy(<<$X>>, 1 bsl 21)]}], {timeout, _} = call(Config, Req). %% Send something for which pick_peer finds no suitable peer. @@ -878,7 +939,7 @@ group(Config) -> #group{} = proplists:get_value(group, Config). string(V, Config) -> - #group{client_strings = B} = group(Config), + #group{strings = B} = group(Config), decode(V,B). decode(S, true) @@ -998,7 +1059,7 @@ pick_peer(Peers, _, [$C|_], _State, {send_detach, Group}, _, {_,_}) -> find(#group{client_service = CN, server_encoding = A, server_container = C}, - Peers) -> + [_|_] = Peers) -> Id = {A,C}, [P] = [P || P <- Peers, id(Id, P, CN)], {ok, P}. @@ -1432,3 +1493,33 @@ request(#diameter_base_STR{'Session-Id' = SId}, %% send_error/send_timeout request(#diameter_base_RAR{}, _Caps) -> receive after 2000 -> {protocol_error, ?TOO_BUSY} end. + +%% message/3 +%% +%% Limit the number of messages received. More can be received if read +%% in the same packet. + +message(recv = D, {[_], Bin}, N) -> + message(D, Bin, N); +message(Dir, #diameter_packet{bin = Bin}, N) -> + message(Dir, Bin, N); + +%% incoming request +message(recv, <<_:32, 1, _/bits>> = Bin, N) -> + [Bin, 1 < N, fun ?MODULE:message/3, N-1]; + +%% incoming answer +message(recv, Bin, _) -> + [Bin]; + +%% outgoing +message(send, Bin, _) -> + [Bin]; + +%% sent request +message(ack, <<_:32, 1, _/bits>>, _) -> + []; + +%% sent answer or discarded request +message(ack, _, N) -> + [0 =< N, fun ?MODULE:message/3, N+1]. diff --git a/lib/diameter/test/diameter_transport_SUITE.erl b/lib/diameter/test/diameter_transport_SUITE.erl index c94f46b7a5..9d981d0a2b 100644 --- a/lib/diameter/test/diameter_transport_SUITE.erl +++ b/lib/diameter/test/diameter_transport_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -294,10 +294,17 @@ init(gen_accept, {Prot, Ref}) -> {ok, PortNr} = inet:port(LSock), true = diameter_reg:add_new(?TEST_LISTENER(Ref, PortNr)), - %% Accept a connection, receive a message and send it back. + %% Accept a connection, receive a message send it back, and wait + %% for the peer to close the connection. {ok, Sock} = gen_accept(Prot, LSock), Bin = gen_recv(Prot, Sock), - ok = gen_send(Prot, Sock, Bin); + ok = gen_send(Prot, Sock, Bin), + receive + {tcp_closed, Sock} = T -> + T; + ?SCTP(Sock, {_, #sctp_assoc_change{}}) = T -> + T + end; init(connect, {Prot, Ref}) -> %% Lookup the peer's listening socket. @@ -311,12 +318,7 @@ init(connect, {Prot, Ref}) -> %% Send a message and receive it back. Bin = make_msg(), TPid ! ?TMSG({send, Bin}), - Bin = bin(Prot, ?RECV(?TMSG({recv, P}), P)), - - %% Expect the transport process to die as a result of the peer - %% closing the connection. - MRef = erlang:monitor(process, TPid), - ?RECV({'DOWN', MRef, process, _, _}). + Bin = bin(Prot, ?RECV(?TMSG({recv, P}), P)). bin(sctp, #diameter_packet{bin = Bin}) -> Bin; @@ -336,15 +338,11 @@ make_msg() -> <<1:8, Len:24, Bin/binary>>. %% crypto:rand_bytes/1 isn't available on all platforms (since openssl -%% isn't) so roll our own. +%% isn't) so roll our own. Not particularly random, but less verbose +%% in trace. rand_bytes(N) -> - rand_bytes(N, <<>>). - -rand_bytes(0, Bin) -> - Bin; -rand_bytes(N, Bin) -> Oct = rand:uniform(256) - 1, - rand_bytes(N-1, <<Oct, Bin/binary>>). + binary:copy(<<Oct>>, N). %% =========================================================================== diff --git a/lib/diameter/test/diameter_util.erl b/lib/diameter/test/diameter_util.erl index 37fcbbc267..03f79096ac 100644 --- a/lib/diameter/test/diameter_util.erl +++ b/lib/diameter/test/diameter_util.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2016. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -172,18 +172,7 @@ recvl([{MRef, F} | L], Ref, Fun, Acc) -> %% Sort a list into random order. scramble(L) -> - foldl(fun(true, _, S, false) -> S end, - false, - [[fun s/1, L]]). - -s(L) -> - s([], L). - -s(Acc, []) -> - Acc; -s(Acc, L) -> - {H, [T|Rest]} = lists:split(rand:uniform(length(L)) - 1, L), - s([T|Acc], H ++ Rest). + [X || {_,X} <- lists:sort([{rand:uniform(), T} || T <- L])]. %% --------------------------------------------------------------------------- %% unique_string/0 @@ -195,6 +184,15 @@ unique_string() -> %% have_sctp/0 have_sctp() -> + have_sctp(erlang:system_info(system_architecture)). + +%% Don't run SCTP on platforms where it's either known to be flakey or +%% isn't available. + +have_sctp("sparc-sun-solaris2.10") -> + false; + +have_sctp(_) -> case gen_sctp:open() of {ok, Sock} -> gen_sctp:close(Sock), @@ -305,17 +303,23 @@ listen(SvcName, Prot, Opts) -> connect(Client, Prot, LRef) -> connect(Client, Prot, LRef, []). -connect(Client, Prot, LRef, Opts) -> +connect(Client, ProtOpts, LRef, Opts) -> + Prot = head(ProtOpts), [PortNr] = lport(Prot, LRef), Client = diameter:service_info(Client, name), %% assert true = diameter:subscribe(Client), - Ref = add_transport(Client, {connect, opts(Prot, PortNr) ++ Opts}), + Ref = add_transport(Client, {connect, opts(ProtOpts, PortNr) ++ Opts}), true = transport(Client, Ref), %% assert diameter_lib:for_n(fun(_) -> ok = up(Client, Ref, Prot, PortNr) end, proplists:get_value(pool_size, Opts, 1)), Ref. +head([T|_]) -> + T; +head(T) -> + T. + up(Client, Ref, Prot, PortNr) -> receive {diameter_event, Client, {up, Ref, _, _, _}} -> ok @@ -358,10 +362,13 @@ tmod(sctp) -> tmod(any) -> [diameter_sctp, diameter_tcp]. -opts(Prot, T) -> - tmo(T, lists:append([[{transport_module, M}, {transport_config, C}] +opts([Prot | Opts], T) -> + tmo(T, lists:append([[{transport_module, M}, {transport_config, C ++ Opts}] || M <- tmod(Prot), - C <- [cfg(M,T) ++ cfg(M) ++ cfg(T)]])). + C <- [cfg(M,T) ++ cfg(M) ++ cfg(T)]])); + +opts(Prot, T) -> + opts([Prot], T). tmo(listen, Opts) -> Opts; diff --git a/lib/diameter/test/diameter_watchdog_SUITE.erl b/lib/diameter/test/diameter_watchdog_SUITE.erl index 6d22ddcc18..39c4f051a5 100644 --- a/lib/diameter/test/diameter_watchdog_SUITE.erl +++ b/lib/diameter/test/diameter_watchdog_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2015. All Rights Reserved. +%% Copyright Ericsson AB 2010-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -44,13 +44,8 @@ -export([peer_up/3, peer_down/3]). -%% gen_tcp-ish interface --export([listen/2, - accept/1, - connect/3, - send/2, - setopts/2, - close/1]). +%% diameter_tcp message_cb +-export([message/3]). -include("diameter.hrl"). -include("diameter_ct.hrl"). @@ -161,9 +156,9 @@ reopen(Type, Test, Ref, Wd, N, M) -> reopen(Type, Test, SvcName, TRef, Wd, N, M). cfg(Type, Type, Wd) -> - {Wd, [], []}; + {Wd, [], false}; cfg(_Type, _Test, _Wd) -> - {?WD(?PEER_WD), [{okay, 0}], [{module, ?MODULE}]}. + {?WD(?PEER_WD), [{okay, 0}], true}. %% reopen/7 @@ -346,7 +341,7 @@ recv_reopen(listen, Ref) -> %% reg/3 %% %% Lookup the pid of the transport process and publish a term for -%% send/2 to lookup. +%% message/3 to lookup. reg(TRef, SvcName, T) -> TPid = tpid(TRef, diameter:service_info(SvcName, transport)), true = diameter_reg:add_new({?MODULE, TPid, T}). @@ -394,7 +389,7 @@ suspect(_) -> suspect(Type, Fake, Ref, N) when is_reference(Ref) -> {SvcName, TRef} - = start(Type, Ref, {?WD(10000), [{suspect, N}], mod(Fake)}), + = start(Type, Ref, {?WD(10000), [{suspect, N}], Fake}), {initial, okay} = ?WD_EVENT(TRef), suspect(TRef, Fake, SvcName, N); @@ -436,11 +431,6 @@ abuse([F|A], Test) -> abuse(F, Test) -> abuse([F], Test). -mod(true) -> - [{module, ?MODULE}]; -mod(false) -> - []. - %% =========================================================================== %% # okay/1 %% =========================================================================== @@ -456,7 +446,7 @@ okay(Type, Fake, Ref, N) {SvcName, TRef} = start(Type, Ref, {?WD(10000), [{okay, choose(Fake, 0, N)}], - mod(Fake)}), + Fake}), {initial, okay} = ?WD_EVENT(TRef), okay(TRef, Fake, @@ -515,12 +505,17 @@ start(Type, Ref, T) -> true = diameter_reg:add_new({Type, Ref, Name}), {Name, TRef}. -opts(Type, Ref, {Timer, Config, Mod}) -> +opts(Type, Ref, {Timer, Config, Fake}) + when is_boolean(Fake) -> [{transport_module, diameter_tcp}, - {transport_config, Mod ++ [{ip, ?ADDR}, {port, 0}] ++ cfg(Type, Ref)}, + {transport_config, mod(Fake) ++ [{ip, ?ADDR}, {port, 0}] + ++ cfg(Type, Ref)}, {watchdog_timer, Timer}, {watchdog_config, Config}]. +mod(B) -> + [{message_cb, [fun message/3, capx]} || B]. + cfg(listen, _) -> []; cfg(connect, Ref) -> @@ -531,37 +526,29 @@ cfg(connect, Ref) -> %% =========================================================================== -listen(PortNr, Opts) -> - gen_tcp:listen(PortNr, Opts). - -accept(LSock) -> - gen_tcp:accept(LSock). +%% message/3 -connect(Addr, Port, Opts) -> - gen_tcp:connect(Addr, Port, Opts). +message(send, Bin, X) -> + send(Bin, X); -setopts(Sock, Opts) -> - inet:setopts(Sock, Opts). +message(recv, Bin, _) -> + [Bin]; -send(Sock, Bin) -> - send(getr(config), Sock, Bin). - -close(Sock) -> - gen_tcp:close(Sock). +message(_, _, _) -> + []. -%% send/3 +%% send/2 %% First outgoing message from a new transport process is CER/CEA. %% Remaining outgoing messages are either DWR or DWA. -send(undefined, Sock, Bin) -> - <<_:32, _:8, 257:24, _/binary>> = Bin, - putr(config, init), - gen_tcp:send(Sock, Bin); +send(Bin, capx) -> + <<_:32, _:8, 257:24, _/binary>> = Bin, %% assert on CER/CEA + [Bin, fun message/3, init]; %% Outgoing DWR: fake reception of DWA. Use the fact that AVP values %% are ignored. This is to ensure that the peer's watchdog state %% transitions are only induced by responses to messages it sends. -send(_, Sock, <<_:32, 1:1, _:7, 280:24, _:32, EId:32, HId:32, _/binary>>) -> +send(<<_:32, 1:1, _:7, 280:24, _:32, EId:32, HId:32, _/binary>>, _) -> Pkt = #diameter_packet{header = #diameter_header{version = 1, end_to_end_id = EId, hop_by_hop_id = HId}, @@ -569,47 +556,36 @@ send(_, Sock, <<_:32, 1:1, _:7, 280:24, _:32, EId:32, HId:32, _/binary>>) -> {'Origin-Host', "XXX"}, {'Origin-Realm', ?REALM}]}, #diameter_packet{bin = Bin} = diameter_codec:encode(?BASE, Pkt), - self() ! {tcp, Sock, Bin}, - ok; + [recv, Bin]; %% First outgoing DWA. -send(init, Sock, Bin) -> +send(Bin, init) -> [{{?MODULE, _, T}, _}] = diameter_reg:wait({?MODULE, self(), '_'}), - putr(config, T), - send(Sock, Bin); + send(Bin, T); %% First transport process. -send({SvcName, {_,_,_} = T}, Sock, Bin) -> +send(Bin, {SvcName, {_,_,_} = T}) -> [{'Origin-Host', _} = OH, {'Origin-Realm', _} = OR | _] = ?SERVICE(SvcName), putr(origin, [OH, OR]), - putr(config, T), - send(Sock, Bin); + send(Bin, T); %% Discard DWA, failback after another timeout in the peer. -send({Wd, 0 = No, Msg}, Sock, Bin) -> +send(Bin, {Wd, 0 = No, Msg}) -> Origin = getr(origin), - spawn(fun() -> failback(?ONE_WD(Wd), Msg, Sock, Bin, Origin) end), - putr(config, No), - ok; + [{defer, ?ONE_WD(Wd), [msg(Msg, Bin, Origin)]}, fun message/3, No]; %% Send DWA while we're in the mood (aka 0 < N). -send({Wd, N, Msg}, Sock, Bin) -> - putr(config, {Wd, N-1, Msg}), - gen_tcp:send(Sock, Bin); +send(Bin, {Wd, N, Msg}) -> + [Bin, fun message/3, {Wd, N-1, Msg}]; %% Discard DWA. -send(0, _Sock, _Bin) -> - ok; +send(_Bin, 0 = No) -> + [fun message/3, No]; %% Send DWA. -send(N, Sock, <<_:32, 0:1, _:7, 280:24, _/binary>> = Bin) -> - putr(config, N-1), - gen_tcp:send(Sock, Bin). - -failback(Tmo, Msg, Sock, Bin, Origin) -> - timer:sleep(Tmo), - ok = gen_tcp:send(Sock, msg(Msg, Bin, Origin)). +send(<<_:32, 0:1, _:7, 280:24, _/binary>> = DWA, N) -> + [DWA, fun message/3, N-1]. %% msg/2 diff --git a/lib/diameter/test/modules.mk b/lib/diameter/test/modules.mk index 80d0f8d59c..0c73adca12 100644 --- a/lib/diameter/test/modules.mk +++ b/lib/diameter/test/modules.mk @@ -1,7 +1,7 @@ # %CopyrightBegin% # -# Copyright Ericsson AB 2010-2015. All Rights Reserved. +# Copyright Ericsson AB 2010-2017. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -31,7 +31,6 @@ MODULES = \ diameter_codec_test \ diameter_config_SUITE \ diameter_compiler_SUITE \ - diameter_dict_SUITE \ diameter_distribution_SUITE \ diameter_dpr_SUITE \ diameter_event_SUITE \ diff --git a/lib/diameter/vsn.mk b/lib/diameter/vsn.mk index cb750c69a3..4801f542fb 100644 --- a/lib/diameter/vsn.mk +++ b/lib/diameter/vsn.mk @@ -1,6 +1,6 @@ # %CopyrightBegin% # -# Copyright Ericsson AB 2010-2016. All Rights Reserved. +# Copyright Ericsson AB 2010-2017. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -17,5 +17,5 @@ # %CopyrightEnd% APPLICATION = diameter -DIAMETER_VSN = 1.12 +DIAMETER_VSN = 2.0 APP_VSN = $(APPLICATION)-$(DIAMETER_VSN)$(PRE_VSN) |