aboutsummaryrefslogtreecommitdiffstats
path: root/lib/ftp/test/ftp_format_SUITE.erl
diff options
context:
space:
mode:
Diffstat (limited to 'lib/ftp/test/ftp_format_SUITE.erl')
-rw-r--r--lib/ftp/test/ftp_format_SUITE.erl328
1 files changed, 328 insertions, 0 deletions
diff --git a/lib/ftp/test/ftp_format_SUITE.erl b/lib/ftp/test/ftp_format_SUITE.erl
new file mode 100644
index 0000000000..95d594a44b
--- /dev/null
+++ b/lib/ftp/test/ftp_format_SUITE.erl
@@ -0,0 +1,328 @@
+%%
+%% %CopyrightBegin%
+%%
+%% Copyright Ericsson AB 2005-2016. All Rights Reserved.
+%%
+%% Licensed under the Apache License, Version 2.0 (the "License");
+%% you may not use this file except in compliance with the License.
+%% You may obtain a copy of the License at
+%%
+%% http://www.apache.org/licenses/LICENSE-2.0
+%%
+%% Unless required by applicable law or agreed to in writing, software
+%% distributed under the License is distributed on an "AS IS" BASIS,
+%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+%% See the License for the specific language governing permissions and
+%% limitations under the License.
+%%
+%% %CopyrightEnd%
+%%
+%%
+-module(ftp_format_SUITE).
+-author('[email protected]').
+
+-include_lib("common_test/include/ct.hrl").
+-include("ftp_internal.hrl").
+
+%% Note: This directive should only be used in test suites.
+-compile(export_all).
+
+suite() ->
+ [{ct_hooks,[ts_install_cth]},
+ {timetrap,{seconds,5}}
+ ].
+
+all() ->
+ [{group, ftp_response}, format_error].
+
+groups() ->
+ [{ftp_response, [],
+ [ftp_150, ftp_200, ftp_220, ftp_226, ftp_257, ftp_331,
+ ftp_425, ftp_other_status_codes, ftp_multiple_lines_status_in_msg,
+ ftp_multiple_lines, ftp_multipel_ctrl_messages]}].
+
+init_per_suite(Config) ->
+ Config.
+
+end_per_suite(_Config) ->
+ ok.
+
+init_per_group(_GroupName, Config) ->
+ Config.
+
+end_per_group(_GroupName, Config) ->
+ Config.
+
+
+init_per_testcase(_, Config) ->
+ Config.
+end_per_testcase(_, _) ->
+ ok.
+
+%%-------------------------------------------------------------------------
+%% Test cases starts here.
+%%-------------------------------------------------------------------------
+
+ftp_150() ->
+ [{doc, "Especially check that respons can be devided in a random place."}].
+ftp_150(Config) when is_list(Config) ->
+ FtpResponse = ["150 ASCII data conn", "ection for /bin/ls ",
+ "(134.138.177", ".89,50434) (0 bytes).\r\n"],
+
+ "150 ASCII data connection for /bin/ls "
+ "(134.138.177.89,50434) (0 bytes).\r\n" = Msg =
+ parse(ftp_response, parse_lines, [[], start], FtpResponse),
+ {pos_prel, _} = ftp_response:interpret(Msg).
+
+ftp_200() ->
+ [{doc, "Especially check that respons can be devided after the first status "
+ "code character and in the end delimiter."}].
+ftp_200(Config) when is_list(Config) ->
+ FtpResponse = ["2", "00 PORT command successful.", [?CR], [?LF]],
+
+ "200 PORT command successful.\r\n" = Msg =
+ parse(ftp_response, parse_lines, [[], start], FtpResponse),
+ {pos_compl, _} = ftp_response:interpret(Msg),
+ ok.
+
+ftp_220() ->
+ [{doc, "Especially check that respons can be devided after the "
+ "first with space "}].
+ftp_220(Config) when is_list(Config) ->
+ FtpResponse = ["220 ","fingon FTP server (SunOS 5.8) ready.\r\n"],
+
+ "220 fingon FTP server (SunOS 5.8) ready.\r\n" = Msg =
+ parse(ftp_response, parse_lines, [[], start], FtpResponse),
+ {pos_compl, _} = ftp_response:interpret(Msg),
+ ok.
+
+ftp_226() ->
+ [{doc, "Especially check that respons can be devided after second status code"
+ " character and in the end delimiter."}].
+ftp_226(Config) when is_list(Config) ->
+ FtpResponse = ["22" "6 Transfer complete.\r", [?LF]],
+
+ "226 Transfer complete.\r\n" = Msg =
+ parse(ftp_response, parse_lines, [[], start], FtpResponse),
+ {pos_compl, _} = ftp_response:interpret(Msg),
+ ok.
+
+ftp_257() ->
+ [{doc, "Especially check that quoted chars do not cause a problem."}].
+ftp_257(Config) when is_list(Config) ->
+ FtpResponse = ["257 \"/\" is current directory.\r\n"],
+
+ "257 \"/\" is current directory.\r\n" = Msg =
+ parse(ftp_response, parse_lines, [[], start], FtpResponse),
+ {pos_compl, _} = ftp_response:interpret(Msg),
+ ok.
+
+ftp_331() ->
+ [{doc, "Especially check that respons can be devided after the third status "
+ " status code character."}].
+ftp_331(Config) when is_list(Config) ->
+ %% Brake before white space after code
+ FtpResponse =
+ ["331"," Guest login ok, send ient as password.\r\n"],
+
+ "331 Guest login ok, send ient as password.\r\n" = Msg =
+ parse(ftp_response, parse_lines, [[], start], FtpResponse),
+ {pos_interm, _} = ftp_response:interpret(Msg),
+ ok.
+
+ftp_425() ->
+ [{doc, "Especially check a message that was received in only one part."}].
+ftp_425(Config) when is_list(Config) ->
+ FtpResponse =
+ ["425 Can't build data connection: Connection refused.\r\n"],
+
+ "425 Can't build data connection: Connection refused.\r\n"
+ = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse),
+ {trans_neg_compl, _} = ftp_response:interpret(Msg),
+ ok.
+
+ftp_multiple_lines_status_in_msg() ->
+ [{doc, "check that multiple lines gets parsed correct, even if we have "
+ " the status code within the msg being sent"}].
+ftp_multiple_lines_status_in_msg(Config) when is_list(Config) ->
+ ML = "230-User usr-230 is logged in\r\n" ++
+ "230 OK. Current directory is /\r\n",
+ {ok, ML, <<>>} = ftp_response:parse_lines(list_to_binary(ML), [], start),
+ ok.
+
+ftp_multiple_lines() ->
+ [{doc, "Especially check multiple lines devided in significant places"}].
+ftp_multiple_lines(Config) when is_list(Config) ->
+ FtpResponse = ["21", "4","-The",
+ " following commands are recognized:\r\n"
+ " USER EPRT STRU MAIL* ALLO CWD",
+ " STAT* XRMD \r\n"
+ " PASS LPRT MODE MSND* "
+ " REST* XCWD HELP PWD ", [?CRLF],
+ " ACCT* EPSV RETR MSOM* RNFR LIST "
+ " NOOP XPWD \r\n",
+ " REIN* LPSV STOR MSAM* RNTO NLST "
+ " MKD CDUP \r\n"
+ " QUIT PASV APPE MRSQ* ABOR SITE* "
+ " XMKD XCUP \r\n"
+ " PORT TYPE MLFL* MRCP* DELE SYST "
+ " RMD STOU \r\n"
+ "214 (*'s => unimplemented)", [?CR], [?LF]],
+
+
+ FtpResponse1 = ["214-", "The",
+ " following commands are recognized:\r\n"
+ " USER EPRT STRU MAIL* ALLO CWD",
+ " STAT* XRMD \r\n"
+ " PASS LPRT MODE MSND* "
+ " REST* XCWD HELP PWD ", [?CRLF],
+ " ACCT* EPSV RETR MSOM* RNFR LIST "
+ " NOOP XPWD \r\n",
+ " REIN* LPSV STOR MSAM* RNTO NLST "
+ " MKD CDUP \r\n"
+ " QUIT PASV APPE MRSQ* ABOR SITE* "
+ " XMKD XCUP \r\n"
+ " PORT TYPE MLFL* MRCP* DELE SYST "
+ " RMD STOU \r\n"
+ "2", "14 (*'s => unimplemented)", [?CR], [?LF]],
+
+ FtpResponse2 = ["214-", "The",
+ " following commands are recognized:\r\n"
+ " USER EPRT STRU MAIL* ALLO CWD",
+ " STAT* XRMD \r\n"
+ " PASS LPRT MODE MSND* "
+ " REST* XCWD HELP PWD ", [?CRLF],
+ " ACCT* EPSV RETR MSOM* RNFR LIST "
+ " NOOP XPWD \r\n",
+ " REIN* LPSV STOR MSAM* RNTO NLST "
+ " MKD CDUP \r\n"
+ " QUIT PASV APPE MRSQ* ABOR SITE* "
+ " XMKD XCUP \r\n"
+ " PORT TYPE MLFL* MRCP* DELE SYST "
+ " RMD STOU \r\n"
+ "21", "4"," (*'s => unimplemented)", [?CR], [?LF]],
+
+ MultiLineResultStr =
+ "214-The following commands are recognized:\r\n"
+ " USER EPRT STRU MAIL* ALLO CWD STAT* "
+ "XRMD \r\n"
+ " PASS LPRT MODE MSND* REST* XCWD HELP "
+ "PWD \r\n"
+ " ACCT* EPSV RETR MSOM* RNFR LIST NOOP "
+ "XPWD \r\n"
+ " REIN* LPSV STOR MSAM* RNTO NLST MKD "
+ "CDUP \r\n"
+ " QUIT PASV APPE MRSQ* ABOR SITE* XMKD "
+ "XCUP \r\n"
+ " PORT TYPE MLFL* MRCP* DELE SYST RMD "
+ "STOU \r\n"
+ "214 (*'s => unimplemented)\r\n",
+
+ MultiLineResultStr =
+ parse(ftp_response, parse_lines, [[], start], FtpResponse),
+ {pos_compl, _} = ftp_response:interpret(MultiLineResultStr),
+
+ MultiLineResultStr = parse(ftp_response, parse_lines, [[], start],
+ FtpResponse1),
+
+ MultiLineResultStr = parse(ftp_response, parse_lines, [[], start],
+ FtpResponse2),
+ ok.
+
+ftp_other_status_codes() ->
+ [{doc, "Check that other valid status codes, than the ones above, are handled"
+ "by ftp_response:interpret/1. Note there are som ftp status codes"
+ "that will not be received with the current ftp instruction support,"
+ "they are not included here."}].
+ftp_other_status_codes(Config) when is_list(Config) ->
+
+ %% 1XX
+ {pos_prel, _ } = ftp_response:interpret("120 Foobar\r\n"),
+
+ %% 2XX
+ {pos_compl, _ } = ftp_response:interpret("202 Foobar\r\n"),
+ {pos_compl, _ } = ftp_response:interpret("221 Foobar\r\n"),
+ {pos_compl, _ } = ftp_response:interpret("227 Foobar\r\n"),
+ {pos_compl, _ } = ftp_response:interpret("230 Foobar\r\n"),
+ {pos_compl, _ } = ftp_response:interpret("250 Foobar\r\n"),
+
+ %% 3XX
+ {pos_interm_acct, _ } = ftp_response:interpret("332 Foobar\r\n"),
+ {pos_interm, _ } = ftp_response:interpret("350 Foobar\r\n"),
+
+ %% 4XX
+ {trans_neg_compl, _ } = ftp_response:interpret("421 Foobar\r\n"),
+ {trans_neg_compl, _ } = ftp_response:interpret("426 Foobar\r\n"),
+ {enofile, _ } = ftp_response:interpret("450 Foobar\r\n"),
+ {trans_neg_compl, _ } = ftp_response:interpret("451 Foobar\r\n"),
+ {etnospc, _ } = ftp_response:interpret("452 Foobar\r\n"),
+
+ %% 5XX
+ {perm_neg_compl, _ } = ftp_response:interpret("500 Foobar\r\n"),
+ {perm_neg_compl, _ } = ftp_response:interpret("501 Foobar\r\n"),
+ {perm_neg_compl, _ } = ftp_response:interpret("503 Foobar\r\n"),
+ {perm_neg_compl, _ } = ftp_response:interpret("504 Foobar\r\n"),
+ {elogin, _ } = ftp_response:interpret("530 Foobar\r\n"),
+ {perm_neg_compl, _ } = ftp_response:interpret("532 Foobar\r\n"),
+ {epath, _ } = ftp_response:interpret("550 Foobar\r\n"),
+ {epnospc, _ } = ftp_response:interpret("552 Foobar\r\n"),
+ {efnamena, _ } = ftp_response:interpret("553 Foobar\r\n"),
+ ok.
+
+ftp_multipel_ctrl_messages() ->
+ [{doc, "The ftp server may send more than one control message as a reply,"
+ "check that they are handled one at the time."}].
+ftp_multipel_ctrl_messages(Config) when is_list(Config) ->
+ FtpResponse = ["200 PORT command successful.\r\n200 Foobar\r\n"],
+
+ {"200 PORT command successful.\r\n" = Msg, NextMsg} =
+ parse(ftp_response, parse_lines, [[], start], FtpResponse),
+ {pos_compl, _} = ftp_response:interpret(Msg),
+ NewMsg = parse(ftp_response, parse_lines, [[], start], NextMsg),
+ {pos_compl, _} = ftp_response:interpret(NewMsg),
+ ok.
+
+
+%%-------------------------------------------------------------------------
+format_error(Config) when is_list(Config) ->
+ "Synchronisation error during chunk sending." =
+ ftp:formaterror(echunk),
+ "Session has been closed." = ftp:formaterror(eclosed),
+ "Connection to remote server prematurely closed." =
+ ftp:formaterror(econn),
+ "File or directory already exists." = ftp:formaterror(eexists),
+ "Host not found, FTP server not found, or connection rejected." =
+ ftp:formaterror(ehost),
+ "User not logged in." = ftp:formaterror(elogin),
+ "Term is not a binary." = ftp:formaterror(enotbinary),
+ "No such file or directory, already exists, or permission denied."
+ = ftp:formaterror(epath),
+ "No such type." = ftp:formaterror(etype),
+ "User name or password not valid." = ftp:formaterror(euser),
+ "Insufficient storage space in system." = ftp:formaterror(etnospc),
+ "Exceeded storage allocation (for current directory or dataset)."
+ = ftp:formaterror(epnospc),
+ "File name not allowed." = ftp:formaterror(efnamena),
+ "Unknown error: foobar" = ftp:formaterror({error, foobar}).
+
+%%--------------------------------------------------------------------
+%%% Internal functions
+%%--------------------------------------------------------------------
+parse(Module, Function, Args, Bin) when is_binary(Bin) ->
+ parse(Module, Function, Args, [binary_to_list(Bin)]);
+
+parse(Module, Function, [AccLines, StatusCode], [Data | Rest]) ->
+ case Module:Function(list_to_binary(Data), AccLines, StatusCode) of
+ {ok, Result, <<>>} ->
+ Result;
+ {ok, Result, Next} ->
+ {Result, Next};
+ {continue, {NewData, NewAccLines, NewStatusCode}} ->
+ case Rest of
+ [] ->
+ ct:fail({wrong_input, Data, Rest});
+ [_ | _] ->
+ parse(Module, Function, [NewAccLines, NewStatusCode],
+ [binary_to_list(NewData) ++ hd(Rest) | tl(Rest)])
+ end
+ end.