diff options
Diffstat (limited to 'lib/ftp')
45 files changed, 12608 insertions, 0 deletions
diff --git a/lib/ftp/AUTHORS b/lib/ftp/AUTHORS new file mode 100644 index 0000000000..88dcbf602a --- /dev/null +++ b/lib/ftp/AUTHORS @@ -0,0 +1,11 @@ +Original Authors: + +Peter Högfeldt - first version of ftp + +Contributors: + +Ingela Anderton Andin +Martin Gustafsson +Johan Blom +Torbjörn Törnkvist +Joe Armstrong
\ No newline at end of file diff --git a/lib/ftp/Makefile b/lib/ftp/Makefile new file mode 100644 index 0000000000..e0c9de42e4 --- /dev/null +++ b/lib/ftp/Makefile @@ -0,0 +1,78 @@ +# +# %CopyrightBegin% +# +# Copyright Ericsson AB 1996-2018. All Rights Reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# %CopyrightEnd% +# +# +include $(ERL_TOP)/make/target.mk +include $(ERL_TOP)/make/$(TARGET)/otp.mk + +# ---------------------------------------------------- +# Macros +# ---------------------------------------------------- + +SUB_DIRECTORIES = src doc/src + +include vsn.mk +VSN = $(FTP_VSN) + +SPECIAL_TARGETS = + +DIA_PLT = ./priv/plt/$(APPLICATION).plt +DIA_ANALYSIS = $(basename $(DIA_PLT)).dialyzer_analysis + + +# ---------------------------------------------------- +# Default Subdir Targets +# ---------------------------------------------------- +include $(ERL_TOP)/make/otp_subdir.mk + +.PHONY: info gclean dialyzer dialyzer_plt dclean + +info: + @echo "OS: $(OS)" + @echo "DOCB: $(DOCB)" + @echo "" + @echo "FTP_VSN: $(FTP_VSN)" + @echo "APP_VSN: $(APP_VSN)" + @echo "" + @echo "DIA_PLT: $(DIA_PLT)" + @echo "DIA_ANALYSIS: $(DIA_ANALYSIS)" + @echo "" + +gclean: + git clean -fXd + +dclean: + rm -f $(DIA_PLT) + rm -f $(DIA_ANALYSIS) + +dialyzer_plt: $(DIA_PLT) + +$(DIA_PLT): + @echo "Building $(APPLICATION) plt file" + @dialyzer --build_plt \ + --output_plt $@ \ + -r ../$(APPLICATION)/ebin \ + --output $(DIA_ANALYSIS) \ + --verbose + +dialyzer: $(DIA_PLT) + @echo "Running dialyzer on $(APPLICATION)" + @dialyzer --plt $< \ + ../$(APPLICATION)/ebin \ + --verbose diff --git a/lib/ftp/doc/archive/rfc2428.txt b/lib/ftp/doc/archive/rfc2428.txt new file mode 100644 index 0000000000..a6ec3535ed --- /dev/null +++ b/lib/ftp/doc/archive/rfc2428.txt @@ -0,0 +1,451 @@ + + + + + + +Network Working Group M. Allman +Request for Comments: 2428 NASA Lewis/Sterling Software +Category: Standards Track S. Ostermann + Ohio University + C. Metz + The Inner Net + September 1998 + + + FTP Extensions for IPv6 and NATs + +Status of this Memo + + This document specifies an Internet standards track protocol for the + Internet community, and requests discussion and suggestions for + improvements. Please refer to the current edition of the "Internet + Official Protocol Standards" (STD 1) for the standardization state + and status of this protocol. Distribution of this memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (1998). All Rights Reserved. + +Abstract + + The specification for the File Transfer Protocol assumes that the + underlying network protocol uses a 32-bit network address + (specifically IP version 4). With the deployment of version 6 of the + Internet Protocol, network addresses will no longer be 32-bits. This + paper specifies extensions to FTP that will allow the protocol to + work over IPv4 and IPv6. In addition, the framework defined can + support additional network protocols in the future. + +1. Introduction + + The keywords, such as MUST and SHOULD, found in this document are + used as defined in RFC 2119 [Bra97]. + + The File Transfer Protocol [PR85] only provides the ability to + communicate information about IPv4 data connections. FTP assumes + network addresses will be 32 bits in length. However, with the + deployment of version 6 of the Internet Protocol [DH96] addresses + will no longer be 32 bits long. RFC 1639 [Pis94] specifies + extensions to FTP to enable its use over various network protocols. + Unfortunately, the mechanism can fail in a multi-protocol + environment. During the transition between IPv4 and IPv6, FTP needs + the ability to negotiate the network protocol that will be used for + data transfer. + + + +Allman, et. al. Standards Track [Page 1] + +RFC 2428 FTP Extensions for IPv6 and NATs September 1998 + + + This document provides a specification for a way that FTP can + communicate data connection endpoint information for network + protocols other than IPv4. In this specification, the FTP commands + PORT and PASV are replaced with EPRT and EPSV, respectively. This + document is organized as follows. Section 2 outlines the EPRT + command and Section 3 outlines the EPSV command. Section 4 defines + the utilization of these two new FTP commands. Section 5 briefly + presents security considerations. Finally, Section 6 provides + conclusions. + +2. The EPRT Command + + The EPRT command allows for the specification of an extended address + for the data connection. The extended address MUST consist of the + network protocol as well as the network and transport addresses. The + format of EPRT is: + + EPRT<space><d><net-prt><d><net-addr><d><tcp-port><d> + + The EPRT command keyword MUST be followed by a single space (ASCII + 32). Following the space, a delimiter character (<d>) MUST be + specified. The delimiter character MUST be one of the ASCII + characters in range 33-126 inclusive. The character "|" (ASCII 124) + is recommended unless it coincides with a character needed to encode + the network address. + + The <net-prt> argument MUST be an address family number defined by + IANA in the latest Assigned Numbers RFC (RFC 1700 [RP94] as of the + writing of this document). This number indicates the protocol to be + used (and, implicitly, the address length). This document will use + two of address family numbers from [RP94] as examples, according to + the following table: + + AF Number Protocol + --------- -------- + 1 Internet Protocol, Version 4 [Pos81a] + 2 Internet Protocol, Version 6 [DH96] + + The <net-addr> is a protocol specific string representation of the + network address. For the two address families specified above (AF + Number 1 and 2), addresses MUST be in the following format: + + AF Number Address Format Example + --------- -------------- ------- + 1 dotted decimal 132.235.1.2 + 2 IPv6 string 1080::8:800:200C:417A + representations + defined in [HD96] + + + +Allman, et. al. Standards Track [Page 2] + +RFC 2428 FTP Extensions for IPv6 and NATs September 1998 + + + The <tcp-port> argument must be the string representation of the + number of the TCP port on which the host is listening for the data + connection. + + The following are sample EPRT commands: + + EPRT |1|132.235.1.2|6275| + + EPRT |2|1080::8:800:200C:417A|5282| + + The first command specifies that the server should use IPv4 to open a + data connection to the host "132.235.1.2" on TCP port 6275. The + second command specifies that the server should use the IPv6 network + protocol and the network address "1080::8:800:200C:417A" to open a + TCP data connection on port 5282. + + Upon receipt of a valid EPRT command, the server MUST return a code + of 200 (Command OK). The standard negative error code 500 and 501 + [PR85] are sufficient to handle most errors (e.g., syntax errors) + involving the EPRT command. However, an additional error code is + needed. The response code 522 indicates that the server does not + support the requested network protocol. The interpretation of this + new error code is: + + 5yz Negative Completion + x2z Connections + xy2 Extended Port Failure - unknown network protocol + + The text portion of the response MUST indicate which network + protocols the server does support. If the network protocol is + unsupported, the format of the response string MUST be: + + <text stating that the network protocol is unsupported> \ + (prot1,prot2,...,protn) + + Both the numeric code specified above and the protocol information + between the characters '(' and ')' are intended for the software + automata receiving the response; the textual message between the + numeric code and the '(' is intended for the human user and can be + any arbitrary text, but MUST NOT include the characters '(' and ')'. + In the above case, the text SHOULD indicate that the network protocol + in the EPRT command is not supported by the server. The list of + protocols inside the parenthesis MUST be a comma separated list of + address family numbers. Two example response strings follow: + + Network protocol not supported, use (1) + + Network protocol not supported, use (1,2) + + + +Allman, et. al. Standards Track [Page 3] + +RFC 2428 FTP Extensions for IPv6 and NATs September 1998 + + +3. The EPSV Command + + The EPSV command requests that a server listen on a data port and + wait for a connection. The EPSV command takes an optional argument. + The response to this command includes only the TCP port number of the + listening connection. The format of the response, however, is + similar to the argument of the EPRT command. This allows the same + parsing routines to be used for both commands. In addition, the + format leaves a place holder for the network protocol and/or network + address, which may be needed in the EPSV response in the future. The + response code for entering passive mode using an extended address + MUST be 229. The interpretation of this code, according to [PR85] + is: + + 2yz Positive Completion + x2z Connections + xy9 Extended Passive Mode Entered + + The text returned in response to the EPSV command MUST be: + + <text indicating server is entering extended passive mode> \ + (<d><d><d><tcp-port><d>) + + The portion of the string enclosed in parentheses MUST be the exact + string needed by the EPRT command to open the data connection, as + specified above. + + The first two fields contained in the parenthesis MUST be blank. The + third field MUST be the string representation of the TCP port number + on which the server is listening for a data connection. The network + protocol used by the data connection will be the same network + protocol used by the control connection. In addition, the network + address used to establish the data connection will be the same + network address used for the control connection. An example response + string follows: + + Entering Extended Passive Mode (|||6446|) + + The standard negative error codes 500 and 501 are sufficient to + handle all errors involving the EPSV command (e.g., syntax errors). + + When the EPSV command is issued with no argument, the server will + choose the network protocol for the data connection based on the + protocol used for the control connection. However, in the case of + proxy FTP, this protocol might not be appropriate for communication + between the two servers. Therefore, the client needs to be able to + request a specific protocol. If the server returns a protocol that + is not supported by the host that will be connecting to the port, the + + + +Allman, et. al. Standards Track [Page 4] + +RFC 2428 FTP Extensions for IPv6 and NATs September 1998 + + + client MUST issue an ABOR (abort) command to allow the server to + close down the listening connection. The client can then send an + EPSV command requesting the use of a specific network protocol, as + follows: + + EPSV<space><net-prt> + + If the requested protocol is supported by the server, it SHOULD use + the protocol. If not, the server MUST return the 522 error messages + as outlined in section 2. + + Finally, the EPSV command can be used with the argument "ALL" to + inform Network Address Translators that the EPRT command (as well as + other data commands) will no longer be used. An example of this + command follows: + + EPSV<space>ALL + + Upon receipt of an EPSV ALL command, the server MUST reject all data + connection setup commands other than EPSV (i.e., EPRT, PORT, PASV, et + al.). This use of the EPSV command is further explained in section + 4. + +4. Command Usage + + For all FTP transfers where the control and data connection(s) are + being established between the same two machines, the EPSV command + MUST be used. Using the EPSV command benefits performance of + transfers that traverse firewalls or Network Address Translators + (NATs). RFC 1579 [Bel94] recommends using the passive command when + behind firewalls since firewalls do not generally allow incoming + connections (which are required when using the PORT (EPRT) command). + In addition, using EPSV as defined in this document does not require + NATs to change the network address in the traffic as it is forwarded. + The NAT would have to change the address if the EPRT command was + used. Finally, if the client issues an "EPSV ALL" command, NATs may + be able to put the connection on a "fast path" through the + translator, as the EPRT command will never be used and therefore, + translation of the data portion of the segments will never be needed. + When a client only expects to do two-way FTP transfers, it SHOULD + issue this command as soon as possible. If a client later finds that + it must do a three-way FTP transfer after issuing an EPSV ALL + command, a new FTP session MUST be started. + + + + + + + + +Allman, et. al. Standards Track [Page 5] + +RFC 2428 FTP Extensions for IPv6 and NATs September 1998 + + +5. Security Issues + + The authors do not believe that these changes to FTP introduce new + security problems. A companion Work in Progress [AO98] is a more + general discussion of FTP security issues and techniques to reduce + these security problems. + +6. Conclusions + + The extensions specified in this paper will enable FTP to operate + over a variety of network protocols. + +References + + [AO98] Allman, M., and S. Ostermann, "FTP Security + Considerations", Work in Progress. + + [Bel94] Bellovin, S., "Firewall-Friendly FTP", RFC 1579, February + 1994. + + [Bra97] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [DH96] Deering, S., and R. Hinden, "Internet Protocol, Version 6 + (IPv6) Specification", RFC 1883, December 1995. + + [HD96] Hinden, R., and S. Deering, "IP Version 6 Addressing + Architecture", RFC 2373, July 1998. + + [Pis94] Piscitello, D., "FTP Operation Over Big Address Records + (FOOBAR)", RFC 1639, June 1994. + + [Pos81a] Postel, J., "Internet Protocol", STD 5, RFC 791, September + 1981. + + [Pos81b] Postel, J., "Transmission Control Protocol", STD 7, RFC 793, + September 1981. + + [PR85] Postel, J., and J. Reynolds, "File Transfer Protocol (FTP)", + STD 9, RFC 959, October 1985. + + [RP94] Reynolds, J., and J. Postel, "Assigned Numbers", STD 2, RFC + 1700, October 1994. See also: + http://www.iana.org/numbers.html + + + + + + + +Allman, et. al. Standards Track [Page 6] + +RFC 2428 FTP Extensions for IPv6 and NATs September 1998 + + +Authors' Addresses + + Mark Allman + NASA Lewis Research Center/Sterling Software + 21000 Brookpark Rd. MS 54-2 + Cleveland, OH 44135 + + Phone: (216) 433-6586 + EMail: [email protected] + http://gigahertz.lerc.nasa.gov/~mallman/ + + + Shawn Ostermann + School of Electrical Engineering and Computer Science + Ohio University + 416 Morton Hall + Athens, OH 45701 + + Phone: (740) 593-1234 + EMail: [email protected] + + + Craig Metz + The Inner Net + Box 10314-1954 + Blacksburg, VA 24062-0314 + + Phone: (DSN) 754-8590 + EMail: [email protected] + + + + + + + + + + + + + + + + + + + + + + +Allman, et. al. Standards Track [Page 7] + +RFC 2428 FTP Extensions for IPv6 and NATs September 1998 + + +Full Copyright Statement + + Copyright (C) The Internet Society (1998). All Rights Reserved. + + This document and translations of it may be copied and furnished to + others, and derivative works that comment on or otherwise explain it + or assist in its implementation may be prepared, copied, published + and distributed, in whole or in part, without restriction of any + kind, provided that the above copyright notice and this paragraph are + included on all such copies and derivative works. However, this + document itself may not be modified in any way, such as by removing + the copyright notice or references to the Internet Society or other + Internet organizations, except as needed for the purpose of + developing Internet standards in which case the procedures for + copyrights defined in the Internet Standards process must be + followed, or as required to translate it into languages other than + English. + + The limited permissions granted above are perpetual and will not be + revoked by the Internet Society or its successors or assigns. + + This document and the information contained herein is provided on an + "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + + + + + + + + + + + + + + + + + + + + + + + + +Allman, et. al. Standards Track [Page 8] + diff --git a/lib/ftp/doc/archive/rfc2577.txt b/lib/ftp/doc/archive/rfc2577.txt new file mode 100644 index 0000000000..83ba203130 --- /dev/null +++ b/lib/ftp/doc/archive/rfc2577.txt @@ -0,0 +1,451 @@ + + + + + + +Network Working Group M. Allman +Request for Comments: 2577 NASA Glenn/Sterling Software +Category: Informational S. Ostermann + Ohio University + May 1999 + + + FTP Security Considerations + +Status of this Memo + + This memo provides information for the Internet community. It does + not specify an Internet standard of any kind. Distribution of this + memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (1999). All Rights Reserved. + +Abstract + + The specification for the File Transfer Protocol (FTP) contains a + number of mechanisms that can be used to compromise network security. + The FTP specification allows a client to instruct a server to + transfer files to a third machine. This third-party mechanism, known + as proxy FTP, causes a well known security problem. The FTP + specification also allows an unlimited number of attempts at entering + a user's password. This allows brute force "password guessing" + attacks. This document provides suggestions for system + administrators and those implementing FTP servers that will decrease + the security problems associated with FTP. + +1 Introduction + + The File Transfer Protocol specification (FTP) [PR85] provides a + mechanism that allows a client to establish an FTP control connection + and transfer a file between two FTP servers. This "proxy FTP" + mechanism can be used to decrease the amount of traffic on the + network; the client instructs one server to transfer a file to + another server, rather than transferring the file from the first + server to the client and then from the client to the second server. + This is particularly useful when the client connects to the network + using a slow link (e.g., a modem). While useful, proxy FTP provides + a security problem known as a "bounce attack" [CERT97:27]. In + addition to the bounce attack, FTP servers can be used by attackers + to guess passwords using brute force. + + + + + +Allman & Ostermann Informational [Page 1] + +RFC 2577 FTP Security Considerations May 1999 + + + This document does not contain a discussion of FTP when used in + conjunction with strong security protocols, such as IP Security. + These security concerns should be documented, however they are out of + the scope of this document. + + This paper provides information for FTP server implementers and + system administrators, as follows. Section 2 describes the FTP + "bounce attack". Section 3 provides suggestions for minimizing the + bounce attack. Section 4 provides suggestions for servers which + limit access based on network address. Section 5 provides + recommendations for limiting brute force "password guessing" by + clients. Next, section 6 provides a brief discussion of mechanisms + to improve privacy. Section 7 provides a mechanism to prevent user + identity guessing. Section 8 discusses the practice of port + stealing. Finally, section 9 provides an overview of other FTP + security issues related to software bugs rather than protocol issues. + +2 The Bounce Attack + + The version of FTP specified in the standard [PR85] provides a method + for attacking well known network servers, while making the + perpetrators difficult to track down. The attack involves sending an + FTP "PORT" command to an FTP server containing the network address + and the port number of the machine and service being attacked. At + this point, the original client can instruct the FTP server to send a + file to the service being attacked. Such a file would contain + commands relevant to the service being attacked (SMTP, NNTP, etc.). + Instructing a third party to connect to the service, rather than + connecting directly, makes tracking down the perpetrator difficult + and can circumvent network-address-based access restrictions. + + As an example, a client uploads a file containing SMTP commands to an + FTP server. Then, using an appropriate PORT command, the client + instructs the server to open a connection to a third machine's SMTP + port. Finally, the client instructs the server to transfer the + uploaded file containing SMTP commands to the third machine. This + may allow the client to forge mail on the third machine without + making a direct connection. This makes it difficult to track + attackers. + +3 Protecting Against the Bounce Attack + + The original FTP specification [PR85] assumes that data connections + will be made using the Transmission Control Protocol (TCP) [Pos81]. + TCP port numbers in the range 0 - 1023 are reserved for well known + services such as mail, network news and FTP control connections + [RP94]. The FTP specification makes no restrictions on the TCP port + number used for the data connection. Therefore, using proxy FTP, + + + +Allman & Ostermann Informational [Page 2] + +RFC 2577 FTP Security Considerations May 1999 + + + clients have the ability to tell the server to attack a well known + service on any machine. + + To avoid such bounce attacks, it is suggested that servers not open + data connections to TCP ports less than 1024. If a server receives a + PORT command containing a TCP port number less than 1024, the + suggested response is 504 (defined as "Command not implemented for + that parameter" by [PR85]). Note that this still leaves non-well + known servers (those running on ports greater than 1023) vulnerable + to bounce attacks. + + Several proposals (e.g., [AOM98] and [Pis94]) provide a mechanism + that would allow data connections to be made using a transport + protocol other than TCP. Similar precautions should be taken to + protect well known services when using these protocols. + + Also note that the bounce attack generally requires that a + perpetrator be able to upload a file to an FTP server and later + download it to the service being attacked. Using proper file + protections will prevent this behavior. However, attackers can also + attack services by sending random data from a remote FTP server which + may cause problems for some services. + + Disabling the PORT command is also an option for protecting against + the bounce attack. Most file transfers can be made using only the + PASV command [Bel94]. The disadvantage of disabling the PORT command + is that one loses the ability to use proxy FTP, but proxy FTP may not + be necessary in a particular environment. + +4 Restricted Access + + For some FTP servers, it is desirable to restrict access based on + network address. For example, a server might want to restrict access + to certain files from certain places (e.g., a certain file should not + be transferred out of an organization). In such a situation, the + server should confirm that the network address of the remote hosts on + both the control connection and the data connection are within the + organization before sending a restricted file. By checking both + connections, a server is protected against the case when the control + connection is established with a trusted host and the data connection + is not. Likewise, the client should verify the IP address of the + remote host after accepting a connection on a port opened in listen + mode to verify that the connection was made by the expected server. + + Note that restricting access based on network address leaves the FTP + server vulnerable to "spoof" attacks. In a spoof attack, for + example, an attacking machine could assume the host address of + another machine inside an organization and download files that are + + + +Allman & Ostermann Informational [Page 3] + +RFC 2577 FTP Security Considerations May 1999 + + + not accessible from outside the organization. Whenever possible, + secure authentication mechanisms should be used, such as those + outlined in [HL97]. + +5 Protecting Passwords + + To minimize the risk of brute force password guessing through the FTP + server, it is suggested that servers limit the number of attempts + that can be made at sending a correct password. After a small number + of attempts (3-5), the server should close the control connection + with the client. Before closing the control connection the server + must send a return code of 421 ("Service not available, closing + control connection." [PR85]) to the client. In addition, it is + suggested that the server impose a 5 second delay before replying to + an invalid "PASS" command to diminish the efficiency of a brute force + attack. If available, mechanisms already provided by the target + operating system should be used to implement the above suggestions. + + An intruder can subvert the above mechanisms by establishing + multiple, parallel control connections to a server. To combat the + use of multiple concurrent connections, the server could either limit + the total number of control connections possible or attempt to detect + suspicious activity across sessions and refuse further connections + from the site. However, both of these mechanisms open the door to + "denial of service" attacks, in which an attacker purposely initiates + the attack to disable access by a valid user. + + Standard FTP [PR85] sends passwords in clear text using the "PASS" + command. It is suggested that FTP clients and servers use alternate + authentication mechanisms that are not subject to eavesdropping (such + as the mechanisms being developed by the IETF Common Authentication + Technology Working Group [HL97]). + +6 Privacy + + All data and control information (including passwords) is sent across + the network in unencrypted form by standard FTP [PR85]. To guarantee + the privacy of the information FTP transmits, a strong encryption + scheme should be used whenever possible. One such mechanism is + defined in [HL97]. + +7 Protecting Usernames + + Standard FTP [PR85] specifies a 530 response to the USER command when + the username is rejected. If the username is valid and a password is + required FTP returns a 331 response instead. In order to prevent a + malicious client from determining valid usernames on a server, it is + suggested that a server always return 331 to the USER command and + + + +Allman & Ostermann Informational [Page 4] + +RFC 2577 FTP Security Considerations May 1999 + + + then reject the combination of username and password for an invalid + username. + +8 Port Stealing + + Many operating systems assign dynamic port numbers in increasing + order. By making a legitimate transfer, an attacker can observe the + current port number allocated by the server and "guess" the next one + that will be used. The attacker can make a connection to this port, + thus denying another legitimate client the ability to make a + transfer. Alternatively, the attacker can steal a file meant for a + legitimate user. In addition, an attacker can insert a forged file + into a data stream thought to come from an authenticated client. + This problem can be mitigated by making FTP clients and servers use + random local port numbers for data connections, either by requesting + random ports from the operating system or using system dependent + mechanisms. + +9 Software-Base Security Problems + + The emphasis in this document is on protocol-related security issues. + There are a number of documented FTP security-related problems that + are due to poor implementation as well. Although the details of + these types of problems are beyond the scope of this document, it + should be pointed out that the following FTP features has been abused + in the past and should be treated with great care by future + implementers: + + Anonymous FTP + + Anonymous FTP refers to the ability of a client to connect to an + FTP server with minimal authentication and gain access to public + files. Security problems arise when such a user can read all + files on the system or can create files. [CERT92:09] [CERT93:06] + + Remote Command Execution + + An optional FTP extension, "SITE EXEC", allows clients to execute + arbitrary commands on the server. This feature should obviously + be implemented with great care. There are several documented + cases of the FTP "SITE EXEC" command being used to subvert server + security [CERT94:08] [CERT95:16] + + Debug Code + + Several previous security compromises related to FTP can be + attributed to software that was installed with debugging features + enabled [CERT88:01]. + + + +Allman & Ostermann Informational [Page 5] + +RFC 2577 FTP Security Considerations May 1999 + + + This document recommends that implementors of FTP servers with these + capabilities review all of the CERT advisories for attacks on these + or similar mechanisms before releasing their software. + +10 Conclusion + + Using the above suggestions can decrease the security problems + associated with FTP servers without eliminating functionality. + +11 Security Considerations + + Security issues are discussed throughout this memo. + +Acknowledgments + + We would like to thank Alex Belits, Jim Bound, William Curtin, Robert + Elz, Paul Hethmon, Alun Jones and Stephen Tihor for their helpful + comments on this paper. Also, we thank the FTPEXT WG members who + gave many useful suggestions at the Memphis IETF meeting. + +References + + [AOM98] Allman, M., Ostermann, S. and C. Metz, "FTP Extensions + for IPv6 and NATs", RFC 2428, September 1998. + + [Bel94] Bellovin. S., "Firewall-Friendly FTP", RFC 1579, February + 1994. + + [CERT88:01] CERT Advisory CA-88:01. ftpd Vulnerability. December, + 1988 ftp://info.cert.org/pub/cert_advisories/ + + [CERT92:09] CERT Advisory CA-92:09. AIX Anonymous FTP Vulnerability. + April 27, 1992. ftp://info.cert.org/pub/cert_advisories/ + + [CERT93:06] CERT Advisory CA-93:06. Wuarchive ftpd Vulnerability. + September 19,1997 + ftp://info.cert.org/pub/cert_advisories/ + + [CERT94:08] CERT Advisory CA-94:08. ftpd Vulnerabilities. September + 23, 1997. ftp://info.cert.org/pub/cert_advisories/ + + [CERT95:16] CERT Advisory CA-95:16. wu-ftpd Misconfiguration + Vulnerability. September 23, 1997 + ftp://info.cert.org/pub/cert_advisories/ + + [CERT97:27] CERT Advisory CA-97.27. FTP Bounce. January 8, 1998. + ftp://info.cert.org/pub/cert_advisories/ + + + + +Allman & Ostermann Informational [Page 6] + +RFC 2577 FTP Security Considerations May 1999 + + + [HL97] Horowitz, M. and S. Lunt, "FTP Security Extensions", RFC + 2228, October 1997. + + [Pis94] Piscitello, D., "FTP Operation Over Big Address Records + (FOOBAR), RFC 1639, June 1994. + + [Pos81] Postel, J., "Transmission Control Protocol", STD 7, RFC + 793, September 1981. + + [PR85] Postel, J. and J. Reynolds, "File Transfer Protocol + (FTP)", STD 9, RFC 959, October 1985. + + [RP94] Reynolds, J. and J. Postel, "Assigned Numbers", STD 2, + RFC 1700, October 1994. See also: + http://www.iana.org/numbers.html + +Authors' Addresses + + Mark Allman + NASA Glenn Research Center/Sterling Software + 21000 Brookpark Rd. MS 54-2 + Cleveland, OH 44135 + + EMail: [email protected] + + + Shawn Ostermann + School of Electrical Engineering and Computer Science + Ohio University + 416 Morton Hall + Athens, OH 45701 + + EMail: [email protected] + + + + + + + + + + + + + + + + + + +Allman & Ostermann Informational [Page 7] + +RFC 2577 FTP Security Considerations May 1999 + + +Full Copyright Statement + + Copyright (C) The Internet Society (1999). All Rights Reserved. + + This document and translations of it may be copied and furnished to + others, and derivative works that comment on or otherwise explain it + or assist in its implementation may be prepared, copied, published + and distributed, in whole or in part, without restriction of any + kind, provided that the above copyright notice and this paragraph are + included on all such copies and derivative works. However, this + document itself may not be modified in any way, such as by removing + the copyright notice or references to the Internet Society or other + Internet organizations, except as needed for the purpose of + developing Internet standards in which case the procedures for + copyrights defined in the Internet Standards process must be + followed, or as required to translate it into languages other than + English. + + The limited permissions granted above are perpetual and will not be + revoked by the Internet Society or its successors or assigns. + + This document and the information contained herein is provided on an + "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +Acknowledgement + + Funding for the RFC Editor function is currently provided by the + Internet Society. + + + + + + + + + + + + + + + + + + + +Allman & Ostermann Informational [Page 8] + diff --git a/lib/ftp/doc/archive/rfc959.txt b/lib/ftp/doc/archive/rfc959.txt new file mode 100644 index 0000000000..5c9f11af5d --- /dev/null +++ b/lib/ftp/doc/archive/rfc959.txt @@ -0,0 +1,3933 @@ + + +Network Working Group J. Postel +Request for Comments: 959 J. Reynolds + ISI +Obsoletes RFC: 765 (IEN 149) October 1985 + + FILE TRANSFER PROTOCOL (FTP) + + +Status of this Memo + + This memo is the official specification of the File Transfer + Protocol (FTP). Distribution of this memo is unlimited. + + The following new optional commands are included in this edition of + the specification: + + CDUP (Change to Parent Directory), SMNT (Structure Mount), STOU + (Store Unique), RMD (Remove Directory), MKD (Make Directory), PWD + (Print Directory), and SYST (System). + + Note that this specification is compatible with the previous edition. + +1. INTRODUCTION + + The objectives of FTP are 1) to promote sharing of files (computer + programs and/or data), 2) to encourage indirect or implicit (via + programs) use of remote computers, 3) to shield a user from + variations in file storage systems among hosts, and 4) to transfer + data reliably and efficiently. FTP, though usable directly by a user + at a terminal, is designed mainly for use by programs. + + The attempt in this specification is to satisfy the diverse needs of + users of maxi-hosts, mini-hosts, personal workstations, and TACs, + with a simple, and easily implemented protocol design. + + This paper assumes knowledge of the Transmission Control Protocol + (TCP) [2] and the Telnet Protocol [3]. These documents are contained + in the ARPA-Internet protocol handbook [1]. + +2. OVERVIEW + + In this section, the history, the terminology, and the FTP model are + discussed. The terms defined in this section are only those that + have special significance in FTP. Some of the terminology is very + specific to the FTP model; some readers may wish to turn to the + section on the FTP model while reviewing the terminology. + + + + + + + +Postel & Reynolds [Page 1] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 2.1. HISTORY + + FTP has had a long evolution over the years. Appendix III is a + chronological compilation of Request for Comments documents + relating to FTP. These include the first proposed file transfer + mechanisms in 1971 that were developed for implementation on hosts + at M.I.T. (RFC 114), plus comments and discussion in RFC 141. + + RFC 172 provided a user-level oriented protocol for file transfer + between host computers (including terminal IMPs). A revision of + this as RFC 265, restated FTP for additional review, while RFC 281 + suggested further changes. The use of a "Set Data Type" + transaction was proposed in RFC 294 in January 1982. + + RFC 354 obsoleted RFCs 264 and 265. The File Transfer Protocol + was now defined as a protocol for file transfer between HOSTs on + the ARPANET, with the primary function of FTP defined as + transfering files efficiently and reliably among hosts and + allowing the convenient use of remote file storage capabilities. + RFC 385 further commented on errors, emphasis points, and + additions to the protocol, while RFC 414 provided a status report + on the working server and user FTPs. RFC 430, issued in 1973, + (among other RFCs too numerous to mention) presented further + comments on FTP. Finally, an "official" FTP document was + published as RFC 454. + + By July 1973, considerable changes from the last versions of FTP + were made, but the general structure remained the same. RFC 542 + was published as a new "official" specification to reflect these + changes. However, many implementations based on the older + specification were not updated. + + In 1974, RFCs 607 and 614 continued comments on FTP. RFC 624 + proposed further design changes and minor modifications. In 1975, + RFC 686 entitled, "Leaving Well Enough Alone", discussed the + differences between all of the early and later versions of FTP. + RFC 691 presented a minor revision of RFC 686, regarding the + subject of print files. + + Motivated by the transition from the NCP to the TCP as the + underlying protocol, a phoenix was born out of all of the above + efforts in RFC 765 as the specification of FTP for use on TCP. + + This current edition of the FTP specification is intended to + correct some minor documentation errors, to improve the + explanation of some protocol features, and to add some new + optional commands. + + +Postel & Reynolds [Page 2] + + + +RFC 959 October 1985 +File Transfer Protocol + + + In particular, the following new optional commands are included in + this edition of the specification: + + CDUP - Change to Parent Directory + + SMNT - Structure Mount + + STOU - Store Unique + + RMD - Remove Directory + + MKD - Make Directory + + PWD - Print Directory + + SYST - System + + This specification is compatible with the previous edition. A + program implemented in conformance to the previous specification + should automatically be in conformance to this specification. + + 2.2. TERMINOLOGY + + ASCII + + The ASCII character set is as defined in the ARPA-Internet + Protocol Handbook. In FTP, ASCII characters are defined to be + the lower half of an eight-bit code set (i.e., the most + significant bit is zero). + + access controls + + Access controls define users' access privileges to the use of a + system, and to the files in that system. Access controls are + necessary to prevent unauthorized or accidental use of files. + It is the prerogative of a server-FTP process to invoke access + controls. + + byte size + + There are two byte sizes of interest in FTP: the logical byte + size of the file, and the transfer byte size used for the + transmission of the data. The transfer byte size is always 8 + bits. The transfer byte size is not necessarily the byte size + in which data is to be stored in a system, nor the logical byte + size for interpretation of the structure of the data. + + + +Postel & Reynolds [Page 3] + + + +RFC 959 October 1985 +File Transfer Protocol + + + control connection + + The communication path between the USER-PI and SERVER-PI for + the exchange of commands and replies. This connection follows + the Telnet Protocol. + + data connection + + A full duplex connection over which data is transferred, in a + specified mode and type. The data transferred may be a part of + a file, an entire file or a number of files. The path may be + between a server-DTP and a user-DTP, or between two + server-DTPs. + + data port + + The passive data transfer process "listens" on the data port + for a connection from the active transfer process in order to + open the data connection. + + DTP + + The data transfer process establishes and manages the data + connection. The DTP can be passive or active. + + End-of-Line + + The end-of-line sequence defines the separation of printing + lines. The sequence is Carriage Return, followed by Line Feed. + + EOF + + The end-of-file condition that defines the end of a file being + transferred. + + EOR + + The end-of-record condition that defines the end of a record + being transferred. + + error recovery + + A procedure that allows a user to recover from certain errors + such as failure of either host system or transfer process. In + FTP, error recovery may involve restarting a file transfer at a + given checkpoint. + + + +Postel & Reynolds [Page 4] + + + +RFC 959 October 1985 +File Transfer Protocol + + + FTP commands + + A set of commands that comprise the control information flowing + from the user-FTP to the server-FTP process. + + file + + An ordered set of computer data (including programs), of + arbitrary length, uniquely identified by a pathname. + + mode + + The mode in which data is to be transferred via the data + connection. The mode defines the data format during transfer + including EOR and EOF. The transfer modes defined in FTP are + described in the Section on Transmission Modes. + + NVT + + The Network Virtual Terminal as defined in the Telnet Protocol. + + NVFS + + The Network Virtual File System. A concept which defines a + standard network file system with standard commands and + pathname conventions. + + page + + A file may be structured as a set of independent parts called + pages. FTP supports the transmission of discontinuous files as + independent indexed pages. + + pathname + + Pathname is defined to be the character string which must be + input to a file system by a user in order to identify a file. + Pathname normally contains device and/or directory names, and + file name specification. FTP does not yet specify a standard + pathname convention. Each user must follow the file naming + conventions of the file systems involved in the transfer. + + PI + + The protocol interpreter. The user and server sides of the + protocol have distinct roles implemented in a user-PI and a + server-PI. + + +Postel & Reynolds [Page 5] + + + +RFC 959 October 1985 +File Transfer Protocol + + + record + + A sequential file may be structured as a number of contiguous + parts called records. Record structures are supported by FTP + but a file need not have record structure. + + reply + + A reply is an acknowledgment (positive or negative) sent from + server to user via the control connection in response to FTP + commands. The general form of a reply is a completion code + (including error codes) followed by a text string. The codes + are for use by programs and the text is usually intended for + human users. + + server-DTP + + The data transfer process, in its normal "active" state, + establishes the data connection with the "listening" data port. + It sets up parameters for transfer and storage, and transfers + data on command from its PI. The DTP can be placed in a + "passive" state to listen for, rather than initiate a + connection on the data port. + + server-FTP process + + A process or set of processes which perform the function of + file transfer in cooperation with a user-FTP process and, + possibly, another server. The functions consist of a protocol + interpreter (PI) and a data transfer process (DTP). + + server-PI + + The server protocol interpreter "listens" on Port L for a + connection from a user-PI and establishes a control + communication connection. It receives standard FTP commands + from the user-PI, sends replies, and governs the server-DTP. + + type + + The data representation type used for data transfer and + storage. Type implies certain transformations between the time + of data storage and data transfer. The representation types + defined in FTP are described in the Section on Establishing + Data Connections. + + + + +Postel & Reynolds [Page 6] + + + +RFC 959 October 1985 +File Transfer Protocol + + + user + + A person or a process on behalf of a person wishing to obtain + file transfer service. The human user may interact directly + with a server-FTP process, but use of a user-FTP process is + preferred since the protocol design is weighted towards + automata. + + user-DTP + + The data transfer process "listens" on the data port for a + connection from a server-FTP process. If two servers are + transferring data between them, the user-DTP is inactive. + + user-FTP process + + A set of functions including a protocol interpreter, a data + transfer process and a user interface which together perform + the function of file transfer in cooperation with one or more + server-FTP processes. The user interface allows a local + language to be used in the command-reply dialogue with the + user. + + user-PI + + The user protocol interpreter initiates the control connection + from its port U to the server-FTP process, initiates FTP + commands, and governs the user-DTP if that process is part of + the file transfer. + + + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 7] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 2.3. THE FTP MODEL + + With the above definitions in mind, the following model (shown in + Figure 1) may be diagrammed for an FTP service. + + ------------- + |/---------\| + || User || -------- + ||Interface|<--->| User | + |\----^----/| -------- + ---------- | | | + |/------\| FTP Commands |/----V----\| + ||Server|<---------------->| User || + || PI || FTP Replies || PI || + |\--^---/| |\----^----/| + | | | | | | + -------- |/--V---\| Data |/----V----\| -------- + | File |<--->|Server|<---------------->| User |<--->| File | + |System| || DTP || Connection || DTP || |System| + -------- |\------/| |\---------/| -------- + ---------- ------------- + + Server-FTP USER-FTP + + NOTES: 1. The data connection may be used in either direction. + 2. The data connection need not exist all of the time. + + Figure 1 Model for FTP Use + + In the model described in Figure 1, the user-protocol interpreter + initiates the control connection. The control connection follows + the Telnet protocol. At the initiation of the user, standard FTP + commands are generated by the user-PI and transmitted to the + server process via the control connection. (The user may + establish a direct control connection to the server-FTP, from a + TAC terminal for example, and generate standard FTP commands + independently, bypassing the user-FTP process.) Standard replies + are sent from the server-PI to the user-PI over the control + connection in response to the commands. + + The FTP commands specify the parameters for the data connection + (data port, transfer mode, representation type, and structure) and + the nature of file system operation (store, retrieve, append, + delete, etc.). The user-DTP or its designate should "listen" on + the specified data port, and the server initiate the data + connection and data transfer in accordance with the specified + parameters. It should be noted that the data port need not be in + + +Postel & Reynolds [Page 8] + + + +RFC 959 October 1985 +File Transfer Protocol + + + the same host that initiates the FTP commands via the control + connection, but the user or the user-FTP process must ensure a + "listen" on the specified data port. It ought to also be noted + that the data connection may be used for simultaneous sending and + receiving. + + In another situation a user might wish to transfer files between + two hosts, neither of which is a local host. The user sets up + control connections to the two servers and then arranges for a + data connection between them. In this manner, control information + is passed to the user-PI but data is transferred between the + server data transfer processes. Following is a model of this + server-server interaction. + + + Control ------------ Control + ---------->| User-FTP |<----------- + | | User-PI | | + | | "C" | | + V ------------ V + -------------- -------------- + | Server-FTP | Data Connection | Server-FTP | + | "A" |<---------------------->| "B" | + -------------- Port (A) Port (B) -------------- + + + Figure 2 + + The protocol requires that the control connections be open while + data transfer is in progress. It is the responsibility of the + user to request the closing of the control connections when + finished using the FTP service, while it is the server who takes + the action. The server may abort data transfer if the control + connections are closed without command. + + The Relationship between FTP and Telnet: + + The FTP uses the Telnet protocol on the control connection. + This can be achieved in two ways: first, the user-PI or the + server-PI may implement the rules of the Telnet Protocol + directly in their own procedures; or, second, the user-PI or + the server-PI may make use of the existing Telnet module in the + system. + + Ease of implementaion, sharing code, and modular programming + argue for the second approach. Efficiency and independence + + + +Postel & Reynolds [Page 9] + + + +RFC 959 October 1985 +File Transfer Protocol + + + argue for the first approach. In practice, FTP relies on very + little of the Telnet Protocol, so the first approach does not + necessarily involve a large amount of code. + +3. DATA TRANSFER FUNCTIONS + + Files are transferred only via the data connection. The control + connection is used for the transfer of commands, which describe the + functions to be performed, and the replies to these commands (see the + Section on FTP Replies). Several commands are concerned with the + transfer of data between hosts. These data transfer commands include + the MODE command which specify how the bits of the data are to be + transmitted, and the STRUcture and TYPE commands, which are used to + define the way in which the data are to be represented. The + transmission and representation are basically independent but the + "Stream" transmission mode is dependent on the file structure + attribute and if "Compressed" transmission mode is used, the nature + of the filler byte depends on the representation type. + + 3.1. DATA REPRESENTATION AND STORAGE + + Data is transferred from a storage device in the sending host to a + storage device in the receiving host. Often it is necessary to + perform certain transformations on the data because data storage + representations in the two systems are different. For example, + NVT-ASCII has different data storage representations in different + systems. DEC TOPS-20s's generally store NVT-ASCII as five 7-bit + ASCII characters, left-justified in a 36-bit word. IBM Mainframe's + store NVT-ASCII as 8-bit EBCDIC codes. Multics stores NVT-ASCII + as four 9-bit characters in a 36-bit word. It is desirable to + convert characters into the standard NVT-ASCII representation when + transmitting text between dissimilar systems. The sending and + receiving sites would have to perform the necessary + transformations between the standard representation and their + internal representations. + + A different problem in representation arises when transmitting + binary data (not character codes) between host systems with + different word lengths. It is not always clear how the sender + should send data, and the receiver store it. For example, when + transmitting 32-bit bytes from a 32-bit word-length system to a + 36-bit word-length system, it may be desirable (for reasons of + efficiency and usefulness) to store the 32-bit bytes + right-justified in a 36-bit word in the latter system. In any + case, the user should have the option of specifying data + representation and transformation functions. It should be noted + + + +Postel & Reynolds [Page 10] + + + +RFC 959 October 1985 +File Transfer Protocol + + + that FTP provides for very limited data type representations. + Transformations desired beyond this limited capability should be + performed by the user directly. + + 3.1.1. DATA TYPES + + Data representations are handled in FTP by a user specifying a + representation type. This type may implicitly (as in ASCII or + EBCDIC) or explicitly (as in Local byte) define a byte size for + interpretation which is referred to as the "logical byte size." + Note that this has nothing to do with the byte size used for + transmission over the data connection, called the "transfer + byte size", and the two should not be confused. For example, + NVT-ASCII has a logical byte size of 8 bits. If the type is + Local byte, then the TYPE command has an obligatory second + parameter specifying the logical byte size. The transfer byte + size is always 8 bits. + + 3.1.1.1. ASCII TYPE + + This is the default type and must be accepted by all FTP + implementations. It is intended primarily for the transfer + of text files, except when both hosts would find the EBCDIC + type more convenient. + + The sender converts the data from an internal character + representation to the standard 8-bit NVT-ASCII + representation (see the Telnet specification). The receiver + will convert the data from the standard form to his own + internal form. + + In accordance with the NVT standard, the <CRLF> sequence + should be used where necessary to denote the end of a line + of text. (See the discussion of file structure at the end + of the Section on Data Representation and Storage.) + + Using the standard NVT-ASCII representation means that data + must be interpreted as 8-bit bytes. + + The Format parameter for ASCII and EBCDIC types is discussed + below. + + + + + + + + +Postel & Reynolds [Page 11] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 3.1.1.2. EBCDIC TYPE + + This type is intended for efficient transfer between hosts + which use EBCDIC for their internal character + representation. + + For transmission, the data are represented as 8-bit EBCDIC + characters. The character code is the only difference + between the functional specifications of EBCDIC and ASCII + types. + + End-of-line (as opposed to end-of-record--see the discussion + of structure) will probably be rarely used with EBCDIC type + for purposes of denoting structure, but where it is + necessary the <NL> character should be used. + + 3.1.1.3. IMAGE TYPE + + The data are sent as contiguous bits which, for transfer, + are packed into the 8-bit transfer bytes. The receiving + site must store the data as contiguous bits. The structure + of the storage system might necessitate the padding of the + file (or of each record, for a record-structured file) to + some convenient boundary (byte, word or block). This + padding, which must be all zeros, may occur only at the end + of the file (or at the end of each record) and there must be + a way of identifying the padding bits so that they may be + stripped off if the file is retrieved. The padding + transformation should be well publicized to enable a user to + process a file at the storage site. + + Image type is intended for the efficient storage and + retrieval of files and for the transfer of binary data. It + is recommended that this type be accepted by all FTP + implementations. + + 3.1.1.4. LOCAL TYPE + + The data is transferred in logical bytes of the size + specified by the obligatory second parameter, Byte size. + The value of Byte size must be a decimal integer; there is + no default value. The logical byte size is not necessarily + the same as the transfer byte size. If there is a + difference in byte sizes, then the logical bytes should be + packed contiguously, disregarding transfer byte boundaries + and with any necessary padding at the end. + + + +Postel & Reynolds [Page 12] + + + +RFC 959 October 1985 +File Transfer Protocol + + + When the data reaches the receiving host, it will be + transformed in a manner dependent on the logical byte size + and the particular host. This transformation must be + invertible (i.e., an identical file can be retrieved if the + same parameters are used) and should be well publicized by + the FTP implementors. + + For example, a user sending 36-bit floating-point numbers to + a host with a 32-bit word could send that data as Local byte + with a logical byte size of 36. The receiving host would + then be expected to store the logical bytes so that they + could be easily manipulated; in this example putting the + 36-bit logical bytes into 64-bit double words should + suffice. + + In another example, a pair of hosts with a 36-bit word size + may send data to one another in words by using TYPE L 36. + The data would be sent in the 8-bit transmission bytes + packed so that 9 transmission bytes carried two host words. + + 3.1.1.5. FORMAT CONTROL + + The types ASCII and EBCDIC also take a second (optional) + parameter; this is to indicate what kind of vertical format + control, if any, is associated with a file. The following + data representation types are defined in FTP: + + A character file may be transferred to a host for one of + three purposes: for printing, for storage and later + retrieval, or for processing. If a file is sent for + printing, the receiving host must know how the vertical + format control is represented. In the second case, it must + be possible to store a file at a host and then retrieve it + later in exactly the same form. Finally, it should be + possible to move a file from one host to another and process + the file at the second host without undue trouble. A single + ASCII or EBCDIC format does not satisfy all these + conditions. Therefore, these types have a second parameter + specifying one of the following three formats: + + 3.1.1.5.1. NON PRINT + + This is the default format to be used if the second + (format) parameter is omitted. Non-print format must be + accepted by all FTP implementations. + + + + +Postel & Reynolds [Page 13] + + + +RFC 959 October 1985 +File Transfer Protocol + + + The file need contain no vertical format information. If + it is passed to a printer process, this process may + assume standard values for spacing and margins. + + Normally, this format will be used with files destined + for processing or just storage. + + 3.1.1.5.2. TELNET FORMAT CONTROLS + + The file contains ASCII/EBCDIC vertical format controls + (i.e., <CR>, <LF>, <NL>, <VT>, <FF>) which the printer + process will interpret appropriately. <CRLF>, in exactly + this sequence, also denotes end-of-line. + + 3.1.1.5.2. CARRIAGE CONTROL (ASA) + + The file contains ASA (FORTRAN) vertical format control + characters. (See RFC 740 Appendix C; and Communications + of the ACM, Vol. 7, No. 10, p. 606, October 1964.) In a + line or a record formatted according to the ASA Standard, + the first character is not to be printed. Instead, it + should be used to determine the vertical movement of the + paper which should take place before the rest of the + record is printed. + + The ASA Standard specifies the following control + characters: + + Character Vertical Spacing + + blank Move paper up one line + 0 Move paper up two lines + 1 Move paper to top of next page + + No movement, i.e., overprint + + Clearly there must be some way for a printer process to + distinguish the end of the structural entity. If a file + has record structure (see below) this is no problem; + records will be explicitly marked during transfer and + storage. If the file has no record structure, the <CRLF> + end-of-line sequence is used to separate printing lines, + but these format effectors are overridden by the ASA + controls. + + + + + + +Postel & Reynolds [Page 14] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 3.1.2. DATA STRUCTURES + + In addition to different representation types, FTP allows the + structure of a file to be specified. Three file structures are + defined in FTP: + + file-structure, where there is no internal structure and + the file is considered to be a + continuous sequence of data bytes, + + record-structure, where the file is made up of sequential + records, + + and page-structure, where the file is made up of independent + indexed pages. + + File-structure is the default to be assumed if the STRUcture + command has not been used but both file and record structures + must be accepted for "text" files (i.e., files with TYPE ASCII + or EBCDIC) by all FTP implementations. The structure of a file + will affect both the transfer mode of a file (see the Section + on Transmission Modes) and the interpretation and storage of + the file. + + The "natural" structure of a file will depend on which host + stores the file. A source-code file will usually be stored on + an IBM Mainframe in fixed length records but on a DEC TOPS-20 + as a stream of characters partitioned into lines, for example + by <CRLF>. If the transfer of files between such disparate + sites is to be useful, there must be some way for one site to + recognize the other's assumptions about the file. + + With some sites being naturally file-oriented and others + naturally record-oriented there may be problems if a file with + one structure is sent to a host oriented to the other. If a + text file is sent with record-structure to a host which is file + oriented, then that host should apply an internal + transformation to the file based on the record structure. + Obviously, this transformation should be useful, but it must + also be invertible so that an identical file may be retrieved + using record structure. + + In the case of a file being sent with file-structure to a + record-oriented host, there exists the question of what + criteria the host should use to divide the file into records + which can be processed locally. If this division is necessary, + the FTP implementation should use the end-of-line sequence, + + +Postel & Reynolds [Page 15] + + + +RFC 959 October 1985 +File Transfer Protocol + + + <CRLF> for ASCII, or <NL> for EBCDIC text files, as the + delimiter. If an FTP implementation adopts this technique, it + must be prepared to reverse the transformation if the file is + retrieved with file-structure. + + 3.1.2.1. FILE STRUCTURE + + File structure is the default to be assumed if the STRUcture + command has not been used. + + In file-structure there is no internal structure and the + file is considered to be a continuous sequence of data + bytes. + + 3.1.2.2. RECORD STRUCTURE + + Record structures must be accepted for "text" files (i.e., + files with TYPE ASCII or EBCDIC) by all FTP implementations. + + In record-structure the file is made up of sequential + records. + + 3.1.2.3. PAGE STRUCTURE + + To transmit files that are discontinuous, FTP defines a page + structure. Files of this type are sometimes known as + "random access files" or even as "holey files". In these + files there is sometimes other information associated with + the file as a whole (e.g., a file descriptor), or with a + section of the file (e.g., page access controls), or both. + In FTP, the sections of the file are called pages. + + To provide for various page sizes and associated + information, each page is sent with a page header. The page + header has the following defined fields: + + Header Length + + The number of logical bytes in the page header + including this byte. The minimum header length is 4. + + Page Index + + The logical page number of this section of the file. + This is not the transmission sequence number of this + page, but the index used to identify this page of the + file. + + +Postel & Reynolds [Page 16] + + + +RFC 959 October 1985 +File Transfer Protocol + + + Data Length + + The number of logical bytes in the page data. The + minimum data length is 0. + + Page Type + + The type of page this is. The following page types + are defined: + + 0 = Last Page + + This is used to indicate the end of a paged + structured transmission. The header length must + be 4, and the data length must be 0. + + 1 = Simple Page + + This is the normal type for simple paged files + with no page level associated control + information. The header length must be 4. + + 2 = Descriptor Page + + This type is used to transmit the descriptive + information for the file as a whole. + + 3 = Access Controlled Page + + This type includes an additional header field + for paged files with page level access control + information. The header length must be 5. + + Optional Fields + + Further header fields may be used to supply per page + control information, for example, per page access + control. + + All fields are one logical byte in length. The logical byte + size is specified by the TYPE command. See Appendix I for + further details and a specific case at the page structure. + + A note of caution about parameters: a file must be stored and + retrieved with the same parameters if the retrieved version is to + + + + +Postel & Reynolds [Page 17] + + + +RFC 959 October 1985 +File Transfer Protocol + + + be identical to the version originally transmitted. Conversely, + FTP implementations must return a file identical to the original + if the parameters used to store and retrieve a file are the same. + + 3.2. ESTABLISHING DATA CONNECTIONS + + The mechanics of transferring data consists of setting up the data + connection to the appropriate ports and choosing the parameters + for transfer. Both the user and the server-DTPs have a default + data port. The user-process default data port is the same as the + control connection port (i.e., U). The server-process default + data port is the port adjacent to the control connection port + (i.e., L-1). + + The transfer byte size is 8-bit bytes. This byte size is relevant + only for the actual transfer of the data; it has no bearing on + representation of the data within a host's file system. + + The passive data transfer process (this may be a user-DTP or a + second server-DTP) shall "listen" on the data port prior to + sending a transfer request command. The FTP request command + determines the direction of the data transfer. The server, upon + receiving the transfer request, will initiate the data connection + to the port. When the connection is established, the data + transfer begins between DTP's, and the server-PI sends a + confirming reply to the user-PI. + + Every FTP implementation must support the use of the default data + ports, and only the USER-PI can initiate a change to non-default + ports. + + It is possible for the user to specify an alternate data port by + use of the PORT command. The user may want a file dumped on a TAC + line printer or retrieved from a third party host. In the latter + case, the user-PI sets up control connections with both + server-PI's. One server is then told (by an FTP command) to + "listen" for a connection which the other will initiate. The + user-PI sends one server-PI a PORT command indicating the data + port of the other. Finally, both are sent the appropriate + transfer commands. The exact sequence of commands and replies + sent between the user-controller and the servers is defined in the + Section on FTP Replies. + + In general, it is the server's responsibility to maintain the data + connection--to initiate it and to close it. The exception to this + + + + +Postel & Reynolds [Page 18] + + + +RFC 959 October 1985 +File Transfer Protocol + + + is when the user-DTP is sending the data in a transfer mode that + requires the connection to be closed to indicate EOF. The server + MUST close the data connection under the following conditions: + + 1. The server has completed sending data in a transfer mode + that requires a close to indicate EOF. + + 2. The server receives an ABORT command from the user. + + 3. The port specification is changed by a command from the + user. + + 4. The control connection is closed legally or otherwise. + + 5. An irrecoverable error condition occurs. + + Otherwise the close is a server option, the exercise of which the + server must indicate to the user-process by either a 250 or 226 + reply only. + + 3.3. DATA CONNECTION MANAGEMENT + + Default Data Connection Ports: All FTP implementations must + support use of the default data connection ports, and only the + User-PI may initiate the use of non-default ports. + + Negotiating Non-Default Data Ports: The User-PI may specify a + non-default user side data port with the PORT command. The + User-PI may request the server side to identify a non-default + server side data port with the PASV command. Since a connection + is defined by the pair of addresses, either of these actions is + enough to get a different data connection, still it is permitted + to do both commands to use new ports on both ends of the data + connection. + + Reuse of the Data Connection: When using the stream mode of data + transfer the end of the file must be indicated by closing the + connection. This causes a problem if multiple files are to be + transfered in the session, due to need for TCP to hold the + connection record for a time out period to guarantee the reliable + communication. Thus the connection can not be reopened at once. + + There are two solutions to this problem. The first is to + negotiate a non-default port. The second is to use another + transfer mode. + + A comment on transfer modes. The stream transfer mode is + + +Postel & Reynolds [Page 19] + + + +RFC 959 October 1985 +File Transfer Protocol + + + inherently unreliable, since one can not determine if the + connection closed prematurely or not. The other transfer modes + (Block, Compressed) do not close the connection to indicate the + end of file. They have enough FTP encoding that the data + connection can be parsed to determine the end of the file. + Thus using these modes one can leave the data connection open + for multiple file transfers. + + 3.4. TRANSMISSION MODES + + The next consideration in transferring data is choosing the + appropriate transmission mode. There are three modes: one which + formats the data and allows for restart procedures; one which also + compresses the data for efficient transfer; and one which passes + the data with little or no processing. In this last case the mode + interacts with the structure attribute to determine the type of + processing. In the compressed mode, the representation type + determines the filler byte. + + All data transfers must be completed with an end-of-file (EOF) + which may be explicitly stated or implied by the closing of the + data connection. For files with record structure, all the + end-of-record markers (EOR) are explicit, including the final one. + For files transmitted in page structure a "last-page" page type is + used. + + NOTE: In the rest of this section, byte means "transfer byte" + except where explicitly stated otherwise. + + For the purpose of standardized transfer, the sending host will + translate its internal end of line or end of record denotation + into the representation prescribed by the transfer mode and file + structure, and the receiving host will perform the inverse + translation to its internal denotation. An IBM Mainframe record + count field may not be recognized at another host, so the + end-of-record information may be transferred as a two byte control + code in Stream mode or as a flagged bit in a Block or Compressed + mode descriptor. End-of-line in an ASCII or EBCDIC file with no + record structure should be indicated by <CRLF> or <NL>, + respectively. Since these transformations imply extra work for + some systems, identical systems transferring non-record structured + text files might wish to use a binary representation and stream + mode for the transfer. + + + + + + +Postel & Reynolds [Page 20] + + + +RFC 959 October 1985 +File Transfer Protocol + + + The following transmission modes are defined in FTP: + + 3.4.1. STREAM MODE + + The data is transmitted as a stream of bytes. There is no + restriction on the representation type used; record structures + are allowed. + + In a record structured file EOR and EOF will each be indicated + by a two-byte control code. The first byte of the control code + will be all ones, the escape character. The second byte will + have the low order bit on and zeros elsewhere for EOR and the + second low order bit on for EOF; that is, the byte will have + value 1 for EOR and value 2 for EOF. EOR and EOF may be + indicated together on the last byte transmitted by turning both + low order bits on (i.e., the value 3). If a byte of all ones + was intended to be sent as data, it should be repeated in the + second byte of the control code. + + If the structure is a file structure, the EOF is indicated by + the sending host closing the data connection and all bytes are + data bytes. + + 3.4.2. BLOCK MODE + + The file is transmitted as a series of data blocks preceded by + one or more header bytes. The header bytes contain a count + field, and descriptor code. The count field indicates the + total length of the data block in bytes, thus marking the + beginning of the next data block (there are no filler bits). + The descriptor code defines: last block in the file (EOF) last + block in the record (EOR), restart marker (see the Section on + Error Recovery and Restart) or suspect data (i.e., the data + being transferred is suspected of errors and is not reliable). + This last code is NOT intended for error control within FTP. + It is motivated by the desire of sites exchanging certain types + of data (e.g., seismic or weather data) to send and receive all + the data despite local errors (such as "magnetic tape read + errors"), but to indicate in the transmission that certain + portions are suspect). Record structures are allowed in this + mode, and any representation type may be used. + + The header consists of the three bytes. Of the 24 bits of + header information, the 16 low order bits shall represent byte + count, and the 8 high order bits shall represent descriptor + codes as shown below. + + + +Postel & Reynolds [Page 21] + + + +RFC 959 October 1985 +File Transfer Protocol + + + Block Header + + +----------------+----------------+----------------+ + | Descriptor | Byte Count | + | 8 bits | 16 bits | + +----------------+----------------+----------------+ + + + The descriptor codes are indicated by bit flags in the + descriptor byte. Four codes have been assigned, where each + code number is the decimal value of the corresponding bit in + the byte. + + Code Meaning + + 128 End of data block is EOR + 64 End of data block is EOF + 32 Suspected errors in data block + 16 Data block is a restart marker + + With this encoding, more than one descriptor coded condition + may exist for a particular block. As many bits as necessary + may be flagged. + + The restart marker is embedded in the data stream as an + integral number of 8-bit bytes representing printable + characters in the language being used over the control + connection (e.g., default--NVT-ASCII). <SP> (Space, in the + appropriate language) must not be used WITHIN a restart marker. + + For example, to transmit a six-character marker, the following + would be sent: + + +--------+--------+--------+ + |Descrptr| Byte count | + |code= 16| = 6 | + +--------+--------+--------+ + + +--------+--------+--------+ + | Marker | Marker | Marker | + | 8 bits | 8 bits | 8 bits | + +--------+--------+--------+ + + +--------+--------+--------+ + | Marker | Marker | Marker | + | 8 bits | 8 bits | 8 bits | + +--------+--------+--------+ + + +Postel & Reynolds [Page 22] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 3.4.3. COMPRESSED MODE + + There are three kinds of information to be sent: regular data, + sent in a byte string; compressed data, consisting of + replications or filler; and control information, sent in a + two-byte escape sequence. If n>0 bytes (up to 127) of regular + data are sent, these n bytes are preceded by a byte with the + left-most bit set to 0 and the right-most 7 bits containing the + number n. + + Byte string: + + 1 7 8 8 + +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ + |0| n | | d(1) | ... | d(n) | + +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ + ^ ^ + |---n bytes---| + of data + + String of n data bytes d(1),..., d(n) + Count n must be positive. + + To compress a string of n replications of the data byte d, the + following 2 bytes are sent: + + Replicated Byte: + + 2 6 8 + +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ + |1 0| n | | d | + +-+-+-+-+-+-+-+-+ +-+-+-+-+-+-+-+-+ + + A string of n filler bytes can be compressed into a single + byte, where the filler byte varies with the representation + type. If the type is ASCII or EBCDIC the filler byte is <SP> + (Space, ASCII code 32, EBCDIC code 64). If the type is Image + or Local byte the filler is a zero byte. + + Filler String: + + 2 6 + +-+-+-+-+-+-+-+-+ + |1 1| n | + +-+-+-+-+-+-+-+-+ + + The escape sequence is a double byte, the first of which is the + + +Postel & Reynolds [Page 23] + + + +RFC 959 October 1985 +File Transfer Protocol + + + escape byte (all zeros) and the second of which contains + descriptor codes as defined in Block mode. The descriptor + codes have the same meaning as in Block mode and apply to the + succeeding string of bytes. + + Compressed mode is useful for obtaining increased bandwidth on + very large network transmissions at a little extra CPU cost. + It can be most effectively used to reduce the size of printer + files such as those generated by RJE hosts. + + 3.5. ERROR RECOVERY AND RESTART + + There is no provision for detecting bits lost or scrambled in data + transfer; this level of error control is handled by the TCP. + However, a restart procedure is provided to protect users from + gross system failures (including failures of a host, an + FTP-process, or the underlying network). + + The restart procedure is defined only for the block and compressed + modes of data transfer. It requires the sender of data to insert + a special marker code in the data stream with some marker + information. The marker information has meaning only to the + sender, but must consist of printable characters in the default or + negotiated language of the control connection (ASCII or EBCDIC). + The marker could represent a bit-count, a record-count, or any + other information by which a system may identify a data + checkpoint. The receiver of data, if it implements the restart + procedure, would then mark the corresponding position of this + marker in the receiving system, and return this information to the + user. + + In the event of a system failure, the user can restart the data + transfer by identifying the marker point with the FTP restart + procedure. The following example illustrates the use of the + restart procedure. + + The sender of the data inserts an appropriate marker block in the + data stream at a convenient point. The receiving host marks the + corresponding data point in its file system and conveys the last + known sender and receiver marker information to the user, either + directly or over the control connection in a 110 reply (depending + on who is the sender). In the event of a system failure, the user + or controller process restarts the server at the last server + marker by sending a restart command with server's marker code as + its argument. The restart command is transmitted over the control + + + + +Postel & Reynolds [Page 24] + + + +RFC 959 October 1985 +File Transfer Protocol + + + connection and is immediately followed by the command (such as + RETR, STOR or LIST) which was being executed when the system + failure occurred. + +4. FILE TRANSFER FUNCTIONS + + The communication channel from the user-PI to the server-PI is + established as a TCP connection from the user to the standard server + port. The user protocol interpreter is responsible for sending FTP + commands and interpreting the replies received; the server-PI + interprets commands, sends replies and directs its DTP to set up the + data connection and transfer the data. If the second party to the + data transfer (the passive transfer process) is the user-DTP, then it + is governed through the internal protocol of the user-FTP host; if it + is a second server-DTP, then it is governed by its PI on command from + the user-PI. The FTP replies are discussed in the next section. In + the description of a few of the commands in this section, it is + helpful to be explicit about the possible replies. + + 4.1. FTP COMMANDS + + 4.1.1. ACCESS CONTROL COMMANDS + + The following commands specify access control identifiers + (command codes are shown in parentheses). + + USER NAME (USER) + + The argument field is a Telnet string identifying the user. + The user identification is that which is required by the + server for access to its file system. This command will + normally be the first command transmitted by the user after + the control connections are made (some servers may require + this). Additional identification information in the form of + a password and/or an account command may also be required by + some servers. Servers may allow a new USER command to be + entered at any point in order to change the access control + and/or accounting information. This has the effect of + flushing any user, password, and account information already + supplied and beginning the login sequence again. All + transfer parameters are unchanged and any file transfer in + progress is completed under the old access control + parameters. + + + + + + +Postel & Reynolds [Page 25] + + + +RFC 959 October 1985 +File Transfer Protocol + + + PASSWORD (PASS) + + The argument field is a Telnet string specifying the user's + password. This command must be immediately preceded by the + user name command, and, for some sites, completes the user's + identification for access control. Since password + information is quite sensitive, it is desirable in general + to "mask" it or suppress typeout. It appears that the + server has no foolproof way to achieve this. It is + therefore the responsibility of the user-FTP process to hide + the sensitive password information. + + ACCOUNT (ACCT) + + The argument field is a Telnet string identifying the user's + account. The command is not necessarily related to the USER + command, as some sites may require an account for login and + others only for specific access, such as storing files. In + the latter case the command may arrive at any time. + + There are reply codes to differentiate these cases for the + automation: when account information is required for login, + the response to a successful PASSword command is reply code + 332. On the other hand, if account information is NOT + required for login, the reply to a successful PASSword + command is 230; and if the account information is needed for + a command issued later in the dialogue, the server should + return a 332 or 532 reply depending on whether it stores + (pending receipt of the ACCounT command) or discards the + command, respectively. + + CHANGE WORKING DIRECTORY (CWD) + + This command allows the user to work with a different + directory or dataset for file storage or retrieval without + altering his login or accounting information. Transfer + parameters are similarly unchanged. The argument is a + pathname specifying a directory or other system dependent + file group designator. + + CHANGE TO PARENT DIRECTORY (CDUP) + + This command is a special case of CWD, and is included to + simplify the implementation of programs for transferring + directory trees between operating systems having different + + + + +Postel & Reynolds [Page 26] + + + +RFC 959 October 1985 +File Transfer Protocol + + + syntaxes for naming the parent directory. The reply codes + shall be identical to the reply codes of CWD. See + Appendix II for further details. + + STRUCTURE MOUNT (SMNT) + + This command allows the user to mount a different file + system data structure without altering his login or + accounting information. Transfer parameters are similarly + unchanged. The argument is a pathname specifying a + directory or other system dependent file group designator. + + REINITIALIZE (REIN) + + This command terminates a USER, flushing all I/O and account + information, except to allow any transfer in progress to be + completed. All parameters are reset to the default settings + and the control connection is left open. This is identical + to the state in which a user finds himself immediately after + the control connection is opened. A USER command may be + expected to follow. + + LOGOUT (QUIT) + + This command terminates a USER and if file transfer is not + in progress, the server closes the control connection. If + file transfer is in progress, the connection will remain + open for result response and the server will then close it. + If the user-process is transferring files for several USERs + but does not wish to close and then reopen connections for + each, then the REIN command should be used instead of QUIT. + + An unexpected close on the control connection will cause the + server to take the effective action of an abort (ABOR) and a + logout (QUIT). + + 4.1.2. TRANSFER PARAMETER COMMANDS + + All data transfer parameters have default values, and the + commands specifying data transfer parameters are required only + if the default parameter values are to be changed. The default + value is the last specified value, or if no value has been + specified, the standard default value is as stated here. This + implies that the server must "remember" the applicable default + values. The commands may be in any order except that they must + precede the FTP service request. The following commands + specify data transfer parameters: + + +Postel & Reynolds [Page 27] + + + +RFC 959 October 1985 +File Transfer Protocol + + + DATA PORT (PORT) + + The argument is a HOST-PORT specification for the data port + to be used in data connection. There are defaults for both + the user and server data ports, and under normal + circumstances this command and its reply are not needed. If + this command is used, the argument is the concatenation of a + 32-bit internet host address and a 16-bit TCP port address. + This address information is broken into 8-bit fields and the + value of each field is transmitted as a decimal number (in + character string representation). The fields are separated + by commas. A port command would be: + + PORT h1,h2,h3,h4,p1,p2 + + where h1 is the high order 8 bits of the internet host + address. + + PASSIVE (PASV) + + This command requests the server-DTP to "listen" on a data + port (which is not its default data port) and to wait for a + connection rather than initiate one upon receipt of a + transfer command. The response to this command includes the + host and port address this server is listening on. + + REPRESENTATION TYPE (TYPE) + + The argument specifies the representation type as described + in the Section on Data Representation and Storage. Several + types take a second parameter. The first parameter is + denoted by a single Telnet character, as is the second + Format parameter for ASCII and EBCDIC; the second parameter + for local byte is a decimal integer to indicate Bytesize. + The parameters are separated by a <SP> (Space, ASCII code + 32). + + The following codes are assigned for type: + + \ / + A - ASCII | | N - Non-print + |-><-| T - Telnet format effectors + E - EBCDIC| | C - Carriage Control (ASA) + / \ + I - Image + + L <byte size> - Local byte Byte size + + +Postel & Reynolds [Page 28] + + + +RFC 959 October 1985 +File Transfer Protocol + + + The default representation type is ASCII Non-print. If the + Format parameter is changed, and later just the first + argument is changed, Format then returns to the Non-print + default. + + FILE STRUCTURE (STRU) + + The argument is a single Telnet character code specifying + file structure described in the Section on Data + Representation and Storage. + + The following codes are assigned for structure: + + F - File (no record structure) + R - Record structure + P - Page structure + + The default structure is File. + + TRANSFER MODE (MODE) + + The argument is a single Telnet character code specifying + the data transfer modes described in the Section on + Transmission Modes. + + The following codes are assigned for transfer modes: + + S - Stream + B - Block + C - Compressed + + The default transfer mode is Stream. + + 4.1.3. FTP SERVICE COMMANDS + + The FTP service commands define the file transfer or the file + system function requested by the user. The argument of an FTP + service command will normally be a pathname. The syntax of + pathnames must conform to server site conventions (with + standard defaults applicable), and the language conventions of + the control connection. The suggested default handling is to + use the last specified device, directory or file name, or the + standard default defined for local users. The commands may be + in any order except that a "rename from" command must be + followed by a "rename to" command and the restart command must + be followed by the interrupted service command (e.g., STOR or + RETR). The data, when transferred in response to FTP service + + +Postel & Reynolds [Page 29] + + + +RFC 959 October 1985 +File Transfer Protocol + + + commands, shall always be sent over the data connection, except + for certain informative replies. The following commands + specify FTP service requests: + + RETRIEVE (RETR) + + This command causes the server-DTP to transfer a copy of the + file, specified in the pathname, to the server- or user-DTP + at the other end of the data connection. The status and + contents of the file at the server site shall be unaffected. + + STORE (STOR) + + This command causes the server-DTP to accept the data + transferred via the data connection and to store the data as + a file at the server site. If the file specified in the + pathname exists at the server site, then its contents shall + be replaced by the data being transferred. A new file is + created at the server site if the file specified in the + pathname does not already exist. + + STORE UNIQUE (STOU) + + This command behaves like STOR except that the resultant + file is to be created in the current directory under a name + unique to that directory. The 250 Transfer Started response + must include the name generated. + + APPEND (with create) (APPE) + + This command causes the server-DTP to accept the data + transferred via the data connection and to store the data in + a file at the server site. If the file specified in the + pathname exists at the server site, then the data shall be + appended to that file; otherwise the file specified in the + pathname shall be created at the server site. + + ALLOCATE (ALLO) + + This command may be required by some servers to reserve + sufficient storage to accommodate the new file to be + transferred. The argument shall be a decimal integer + representing the number of bytes (using the logical byte + size) of storage to be reserved for the file. For files + sent with record or page structure a maximum record or page + size (in logical bytes) might also be necessary; this is + indicated by a decimal integer in a second argument field of + + +Postel & Reynolds [Page 30] + + + +RFC 959 October 1985 +File Transfer Protocol + + + the command. This second argument is optional, but when + present should be separated from the first by the three + Telnet characters <SP> R <SP>. This command shall be + followed by a STORe or APPEnd command. The ALLO command + should be treated as a NOOP (no operation) by those servers + which do not require that the maximum size of the file be + declared beforehand, and those servers interested in only + the maximum record or page size should accept a dummy value + in the first argument and ignore it. + + RESTART (REST) + + The argument field represents the server marker at which + file transfer is to be restarted. This command does not + cause file transfer but skips over the file to the specified + data checkpoint. This command shall be immediately followed + by the appropriate FTP service command which shall cause + file transfer to resume. + + RENAME FROM (RNFR) + + This command specifies the old pathname of the file which is + to be renamed. This command must be immediately followed by + a "rename to" command specifying the new file pathname. + + RENAME TO (RNTO) + + This command specifies the new pathname of the file + specified in the immediately preceding "rename from" + command. Together the two commands cause a file to be + renamed. + + ABORT (ABOR) + + This command tells the server to abort the previous FTP + service command and any associated transfer of data. The + abort command may require "special action", as discussed in + the Section on FTP Commands, to force recognition by the + server. No action is to be taken if the previous command + has been completed (including data transfer). The control + connection is not to be closed by the server, but the data + connection must be closed. + + There are two cases for the server upon receipt of this + command: (1) the FTP service command was already completed, + or (2) the FTP service command is still in progress. + + + +Postel & Reynolds [Page 31] + + + +RFC 959 October 1985 +File Transfer Protocol + + + In the first case, the server closes the data connection + (if it is open) and responds with a 226 reply, indicating + that the abort command was successfully processed. + + In the second case, the server aborts the FTP service in + progress and closes the data connection, returning a 426 + reply to indicate that the service request terminated + abnormally. The server then sends a 226 reply, + indicating that the abort command was successfully + processed. + + DELETE (DELE) + + This command causes the file specified in the pathname to be + deleted at the server site. If an extra level of protection + is desired (such as the query, "Do you really wish to + delete?"), it should be provided by the user-FTP process. + + REMOVE DIRECTORY (RMD) + + This command causes the directory specified in the pathname + to be removed as a directory (if the pathname is absolute) + or as a subdirectory of the current working directory (if + the pathname is relative). See Appendix II. + + MAKE DIRECTORY (MKD) + + This command causes the directory specified in the pathname + to be created as a directory (if the pathname is absolute) + or as a subdirectory of the current working directory (if + the pathname is relative). See Appendix II. + + PRINT WORKING DIRECTORY (PWD) + + This command causes the name of the current working + directory to be returned in the reply. See Appendix II. + + LIST (LIST) + + This command causes a list to be sent from the server to the + passive DTP. If the pathname specifies a directory or other + group of files, the server should transfer a list of files + in the specified directory. If the pathname specifies a + file then the server should send current information on the + file. A null argument implies the user's current working or + default directory. The data transfer is over the data + connection in type ASCII or type EBCDIC. (The user must + + +Postel & Reynolds [Page 32] + + + +RFC 959 October 1985 +File Transfer Protocol + + + ensure that the TYPE is appropriately ASCII or EBCDIC). + Since the information on a file may vary widely from system + to system, this information may be hard to use automatically + in a program, but may be quite useful to a human user. + + NAME LIST (NLST) + + This command causes a directory listing to be sent from + server to user site. The pathname should specify a + directory or other system-specific file group descriptor; a + null argument implies the current directory. The server + will return a stream of names of files and no other + information. The data will be transferred in ASCII or + EBCDIC type over the data connection as valid pathname + strings separated by <CRLF> or <NL>. (Again the user must + ensure that the TYPE is correct.) This command is intended + to return information that can be used by a program to + further process the files automatically. For example, in + the implementation of a "multiple get" function. + + SITE PARAMETERS (SITE) + + This command is used by the server to provide services + specific to his system that are essential to file transfer + but not sufficiently universal to be included as commands in + the protocol. The nature of these services and the + specification of their syntax can be stated in a reply to + the HELP SITE command. + + SYSTEM (SYST) + + This command is used to find out the type of operating + system at the server. The reply shall have as its first + word one of the system names listed in the current version + of the Assigned Numbers document [4]. + + STATUS (STAT) + + This command shall cause a status response to be sent over + the control connection in the form of a reply. The command + may be sent during a file transfer (along with the Telnet IP + and Synch signals--see the Section on FTP Commands) in which + case the server will respond with the status of the + operation in progress, or it may be sent between file + transfers. In the latter case, the command may have an + argument field. If the argument is a pathname, the command + is analogous to the "list" command except that data shall be + + +Postel & Reynolds [Page 33] + + + +RFC 959 October 1985 +File Transfer Protocol + + + transferred over the control connection. If a partial + pathname is given, the server may respond with a list of + file names or attributes associated with that specification. + If no argument is given, the server should return general + status information about the server FTP process. This + should include current values of all transfer parameters and + the status of connections. + + HELP (HELP) + + This command shall cause the server to send helpful + information regarding its implementation status over the + control connection to the user. The command may take an + argument (e.g., any command name) and return more specific + information as a response. The reply is type 211 or 214. + It is suggested that HELP be allowed before entering a USER + command. The server may use this reply to specify + site-dependent parameters, e.g., in response to HELP SITE. + + NOOP (NOOP) + + This command does not affect any parameters or previously + entered commands. It specifies no action other than that the + server send an OK reply. + + The File Transfer Protocol follows the specifications of the Telnet + protocol for all communications over the control connection. Since + the language used for Telnet communication may be a negotiated + option, all references in the next two sections will be to the + "Telnet language" and the corresponding "Telnet end-of-line code". + Currently, one may take these to mean NVT-ASCII and <CRLF>. No other + specifications of the Telnet protocol will be cited. + + FTP commands are "Telnet strings" terminated by the "Telnet end of + line code". The command codes themselves are alphabetic characters + terminated by the character <SP> (Space) if parameters follow and + Telnet-EOL otherwise. The command codes and the semantics of + commands are described in this section; the detailed syntax of + commands is specified in the Section on Commands, the reply sequences + are discussed in the Section on Sequencing of Commands and Replies, + and scenarios illustrating the use of commands are provided in the + Section on Typical FTP Scenarios. + + FTP commands may be partitioned as those specifying access-control + identifiers, data transfer parameters, or FTP service requests. + Certain commands (such as ABOR, STAT, QUIT) may be sent over the + control connection while a data transfer is in progress. Some + + +Postel & Reynolds [Page 34] + + + +RFC 959 October 1985 +File Transfer Protocol + + + servers may not be able to monitor the control and data connections + simultaneously, in which case some special action will be necessary + to get the server's attention. The following ordered format is + tentatively recommended: + + 1. User system inserts the Telnet "Interrupt Process" (IP) signal + in the Telnet stream. + + 2. User system sends the Telnet "Synch" signal. + + 3. User system inserts the command (e.g., ABOR) in the Telnet + stream. + + 4. Server PI, after receiving "IP", scans the Telnet stream for + EXACTLY ONE FTP command. + + (For other servers this may not be necessary but the actions listed + above should have no unusual effect.) + + 4.2. FTP REPLIES + + Replies to File Transfer Protocol commands are devised to ensure + the synchronization of requests and actions in the process of file + transfer, and to guarantee that the user process always knows the + state of the Server. Every command must generate at least one + reply, although there may be more than one; in the latter case, + the multiple replies must be easily distinguished. In addition, + some commands occur in sequential groups, such as USER, PASS and + ACCT, or RNFR and RNTO. The replies show the existence of an + intermediate state if all preceding commands have been successful. + A failure at any point in the sequence necessitates the repetition + of the entire sequence from the beginning. + + The details of the command-reply sequence are made explicit in + a set of state diagrams below. + + An FTP reply consists of a three digit number (transmitted as + three alphanumeric characters) followed by some text. The number + is intended for use by automata to determine what state to enter + next; the text is intended for the human user. It is intended + that the three digits contain enough encoded information that the + user-process (the User-PI) will not need to examine the text and + may either discard it or pass it on to the user, as appropriate. + In particular, the text may be server-dependent, so there are + likely to be varying texts for each reply code. + + A reply is defined to contain the 3-digit code, followed by Space + + +Postel & Reynolds [Page 35] + + + +RFC 959 October 1985 +File Transfer Protocol + + + <SP>, followed by one line of text (where some maximum line length + has been specified), and terminated by the Telnet end-of-line + code. There will be cases however, where the text is longer than + a single line. In these cases the complete text must be bracketed + so the User-process knows when it may stop reading the reply (i.e. + stop processing input on the control connection) and go do other + things. This requires a special format on the first line to + indicate that more than one line is coming, and another on the + last line to designate it as the last. At least one of these must + contain the appropriate reply code to indicate the state of the + transaction. To satisfy all factions, it was decided that both + the first and last line codes should be the same. + + Thus the format for multi-line replies is that the first line + will begin with the exact required reply code, followed + immediately by a Hyphen, "-" (also known as Minus), followed by + text. The last line will begin with the same code, followed + immediately by Space <SP>, optionally some text, and the Telnet + end-of-line code. + + For example: + 123-First line + Second line + 234 A line beginning with numbers + 123 The last line + + The user-process then simply needs to search for the second + occurrence of the same reply code, followed by <SP> (Space), at + the beginning of a line, and ignore all intermediary lines. If + an intermediary line begins with a 3-digit number, the Server + must pad the front to avoid confusion. + + This scheme allows standard system routines to be used for + reply information (such as for the STAT reply), with + "artificial" first and last lines tacked on. In rare cases + where these routines are able to generate three digits and a + Space at the beginning of any line, the beginning of each + text line should be offset by some neutral text, like Space. + + This scheme assumes that multi-line replies may not be nested. + + The three digits of the reply each have a special significance. + This is intended to allow a range of very simple to very + sophisticated responses by the user-process. The first digit + denotes whether the response is good, bad or incomplete. + (Referring to the state diagram), an unsophisticated user-process + will be able to determine its next action (proceed as planned, + + +Postel & Reynolds [Page 36] + + + +RFC 959 October 1985 +File Transfer Protocol + + + redo, retrench, etc.) by simply examining this first digit. A + user-process that wants to know approximately what kind of error + occurred (e.g. file system error, command syntax error) may + examine the second digit, reserving the third digit for the finest + gradation of information (e.g., RNTO command without a preceding + RNFR). + + There are five values for the first digit of the reply code: + + 1yz Positive Preliminary reply + + The requested action is being initiated; expect another + reply before proceeding with a new command. (The + user-process sending another command before the + completion reply would be in violation of protocol; but + server-FTP processes should queue any commands that + arrive while a preceding command is in progress.) This + type of reply can be used to indicate that the command + was accepted and the user-process may now pay attention + to the data connections, for implementations where + simultaneous monitoring is difficult. The server-FTP + process may send at most, one 1yz reply per command. + + 2yz Positive Completion reply + + The requested action has been successfully completed. A + new request may be initiated. + + 3yz Positive Intermediate reply + + The command has been accepted, but the requested action + is being held in abeyance, pending receipt of further + information. The user should send another command + specifying this information. This reply is used in + command sequence groups. + + 4yz Transient Negative Completion reply + + The command was not accepted and the requested action did + not take place, but the error condition is temporary and + the action may be requested again. The user should + return to the beginning of the command sequence, if any. + It is difficult to assign a meaning to "transient", + particularly when two distinct sites (Server- and + User-processes) have to agree on the interpretation. + Each reply in the 4yz category might have a slightly + different time value, but the intent is that the + + +Postel & Reynolds [Page 37] + + + +RFC 959 October 1985 +File Transfer Protocol + + + user-process is encouraged to try again. A rule of thumb + in determining if a reply fits into the 4yz or the 5yz + (Permanent Negative) category is that replies are 4yz if + the commands can be repeated without any change in + command form or in properties of the User or Server + (e.g., the command is spelled the same with the same + arguments used; the user does not change his file access + or user name; the server does not put up a new + implementation.) + + 5yz Permanent Negative Completion reply + + The command was not accepted and the requested action did + not take place. The User-process is discouraged from + repeating the exact request (in the same sequence). Even + some "permanent" error conditions can be corrected, so + the human user may want to direct his User-process to + reinitiate the command sequence by direct action at some + point in the future (e.g., after the spelling has been + changed, or the user has altered his directory status.) + + The following function groupings are encoded in the second + digit: + + x0z Syntax - These replies refer to syntax errors, + syntactically correct commands that don't fit any + functional category, unimplemented or superfluous + commands. + + x1z Information - These are replies to requests for + information, such as status or help. + + x2z Connections - Replies referring to the control and + data connections. + + x3z Authentication and accounting - Replies for the login + process and accounting procedures. + + x4z Unspecified as yet. + + x5z File system - These replies indicate the status of the + Server file system vis-a-vis the requested transfer or + other file system action. + + The third digit gives a finer gradation of meaning in each of + the function categories, specified by the second digit. The + list of replies below will illustrate this. Note that the text + + +Postel & Reynolds [Page 38] + + + +RFC 959 October 1985 +File Transfer Protocol + + + associated with each reply is recommended, rather than + mandatory, and may even change according to the command with + which it is associated. The reply codes, on the other hand, + must strictly follow the specifications in the last section; + that is, Server implementations should not invent new codes for + situations that are only slightly different from the ones + described here, but rather should adapt codes already defined. + + A command such as TYPE or ALLO whose successful execution + does not offer the user-process any new information will + cause a 200 reply to be returned. If the command is not + implemented by a particular Server-FTP process because it + has no relevance to that computer system, for example ALLO + at a TOPS20 site, a Positive Completion reply is still + desired so that the simple User-process knows it can proceed + with its course of action. A 202 reply is used in this case + with, for example, the reply text: "No storage allocation + necessary." If, on the other hand, the command requests a + non-site-specific action and is unimplemented, the response + is 502. A refinement of that is the 504 reply for a command + that is implemented, but that requests an unimplemented + parameter. + + 4.2.1 Reply Codes by Function Groups + + 200 Command okay. + 500 Syntax error, command unrecognized. + This may include errors such as command line too long. + 501 Syntax error in parameters or arguments. + 202 Command not implemented, superfluous at this site. + 502 Command not implemented. + 503 Bad sequence of commands. + 504 Command not implemented for that parameter. + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 39] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 110 Restart marker reply. + In this case, the text is exact and not left to the + particular implementation; it must read: + MARK yyyy = mmmm + Where yyyy is User-process data stream marker, and mmmm + server's equivalent marker (note the spaces between markers + and "="). + 211 System status, or system help reply. + 212 Directory status. + 213 File status. + 214 Help message. + On how to use the server or the meaning of a particular + non-standard command. This reply is useful only to the + human user. + 215 NAME system type. + Where NAME is an official system name from the list in the + Assigned Numbers document. + + 120 Service ready in nnn minutes. + 220 Service ready for new user. + 221 Service closing control connection. + Logged out if appropriate. + 421 Service not available, closing control connection. + This may be a reply to any command if the service knows it + must shut down. + 125 Data connection already open; transfer starting. + 225 Data connection open; no transfer in progress. + 425 Can't open data connection. + 226 Closing data connection. + Requested file action successful (for example, file + transfer or file abort). + 426 Connection closed; transfer aborted. + 227 Entering Passive Mode (h1,h2,h3,h4,p1,p2). + + 230 User logged in, proceed. + 530 Not logged in. + 331 User name okay, need password. + 332 Need account for login. + 532 Need account for storing files. + + + + + + + + + + +Postel & Reynolds [Page 40] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 150 File status okay; about to open data connection. + 250 Requested file action okay, completed. + 257 "PATHNAME" created. + 350 Requested file action pending further information. + 450 Requested file action not taken. + File unavailable (e.g., file busy). + 550 Requested action not taken. + File unavailable (e.g., file not found, no access). + 451 Requested action aborted. Local error in processing. + 551 Requested action aborted. Page type unknown. + 452 Requested action not taken. + Insufficient storage space in system. + 552 Requested file action aborted. + Exceeded storage allocation (for current directory or + dataset). + 553 Requested action not taken. + File name not allowed. + + + 4.2.2 Numeric Order List of Reply Codes + + 110 Restart marker reply. + In this case, the text is exact and not left to the + particular implementation; it must read: + MARK yyyy = mmmm + Where yyyy is User-process data stream marker, and mmmm + server's equivalent marker (note the spaces between markers + and "="). + 120 Service ready in nnn minutes. + 125 Data connection already open; transfer starting. + 150 File status okay; about to open data connection. + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 41] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 200 Command okay. + 202 Command not implemented, superfluous at this site. + 211 System status, or system help reply. + 212 Directory status. + 213 File status. + 214 Help message. + On how to use the server or the meaning of a particular + non-standard command. This reply is useful only to the + human user. + 215 NAME system type. + Where NAME is an official system name from the list in the + Assigned Numbers document. + 220 Service ready for new user. + 221 Service closing control connection. + Logged out if appropriate. + 225 Data connection open; no transfer in progress. + 226 Closing data connection. + Requested file action successful (for example, file + transfer or file abort). + 227 Entering Passive Mode (h1,h2,h3,h4,p1,p2). + 230 User logged in, proceed. + 250 Requested file action okay, completed. + 257 "PATHNAME" created. + + 331 User name okay, need password. + 332 Need account for login. + 350 Requested file action pending further information. + + 421 Service not available, closing control connection. + This may be a reply to any command if the service knows it + must shut down. + 425 Can't open data connection. + 426 Connection closed; transfer aborted. + 450 Requested file action not taken. + File unavailable (e.g., file busy). + 451 Requested action aborted: local error in processing. + 452 Requested action not taken. + Insufficient storage space in system. + + + + + + + + + + + +Postel & Reynolds [Page 42] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 500 Syntax error, command unrecognized. + This may include errors such as command line too long. + 501 Syntax error in parameters or arguments. + 502 Command not implemented. + 503 Bad sequence of commands. + 504 Command not implemented for that parameter. + 530 Not logged in. + 532 Need account for storing files. + 550 Requested action not taken. + File unavailable (e.g., file not found, no access). + 551 Requested action aborted: page type unknown. + 552 Requested file action aborted. + Exceeded storage allocation (for current directory or + dataset). + 553 Requested action not taken. + File name not allowed. + + +5. DECLARATIVE SPECIFICATIONS + + 5.1. MINIMUM IMPLEMENTATION + + In order to make FTP workable without needless error messages, the + following minimum implementation is required for all servers: + + TYPE - ASCII Non-print + MODE - Stream + STRUCTURE - File, Record + COMMANDS - USER, QUIT, PORT, + TYPE, MODE, STRU, + for the default values + RETR, STOR, + NOOP. + + The default values for transfer parameters are: + + TYPE - ASCII Non-print + MODE - Stream + STRU - File + + All hosts must accept the above as the standard defaults. + + + + + + + + +Postel & Reynolds [Page 43] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 5.2. CONNECTIONS + + The server protocol interpreter shall "listen" on Port L. The + user or user protocol interpreter shall initiate the full-duplex + control connection. Server- and user- processes should follow the + conventions of the Telnet protocol as specified in the + ARPA-Internet Protocol Handbook [1]. Servers are under no + obligation to provide for editing of command lines and may require + that it be done in the user host. The control connection shall be + closed by the server at the user's request after all transfers and + replies are completed. + + The user-DTP must "listen" on the specified data port; this may be + the default user port (U) or a port specified in the PORT command. + The server shall initiate the data connection from his own default + data port (L-1) using the specified user data port. The direction + of the transfer and the port used will be determined by the FTP + service command. + + Note that all FTP implementation must support data transfer using + the default port, and that only the USER-PI may initiate the use + of non-default ports. + + When data is to be transferred between two servers, A and B (refer + to Figure 2), the user-PI, C, sets up control connections with + both server-PI's. One of the servers, say A, is then sent a PASV + command telling him to "listen" on his data port rather than + initiate a connection when he receives a transfer service command. + When the user-PI receives an acknowledgment to the PASV command, + which includes the identity of the host and port being listened + on, the user-PI then sends A's port, a, to B in a PORT command; a + reply is returned. The user-PI may then send the corresponding + service commands to A and B. Server B initiates the connection + and the transfer proceeds. The command-reply sequence is listed + below where the messages are vertically synchronous but + horizontally asynchronous: + + + + + + + + + + + + + +Postel & Reynolds [Page 44] + + + +RFC 959 October 1985 +File Transfer Protocol + + + User-PI - Server A User-PI - Server B + ------------------ ------------------ + + C->A : Connect C->B : Connect + C->A : PASV + A->C : 227 Entering Passive Mode. A1,A2,A3,A4,a1,a2 + C->B : PORT A1,A2,A3,A4,a1,a2 + B->C : 200 Okay + C->A : STOR C->B : RETR + B->A : Connect to HOST-A, PORT-a + + Figure 3 + + The data connection shall be closed by the server under the + conditions described in the Section on Establishing Data + Connections. If the data connection is to be closed following a + data transfer where closing the connection is not required to + indicate the end-of-file, the server must do so immediately. + Waiting until after a new transfer command is not permitted + because the user-process will have already tested the data + connection to see if it needs to do a "listen"; (remember that the + user must "listen" on a closed data port BEFORE sending the + transfer request). To prevent a race condition here, the server + sends a reply (226) after closing the data connection (or if the + connection is left open, a "file transfer completed" reply (250) + and the user-PI should wait for one of these replies before + issuing a new transfer command). + + Any time either the user or server see that the connection is + being closed by the other side, it should promptly read any + remaining data queued on the connection and issue the close on its + own side. + + 5.3. COMMANDS + + The commands are Telnet character strings transmitted over the + control connections as described in the Section on FTP Commands. + The command functions and semantics are described in the Section + on Access Control Commands, Transfer Parameter Commands, FTP + Service Commands, and Miscellaneous Commands. The command syntax + is specified here. + + The commands begin with a command code followed by an argument + field. The command codes are four or fewer alphabetic characters. + Upper and lower case alphabetic characters are to be treated + identically. Thus, any of the following may represent the + retrieve command: + + +Postel & Reynolds [Page 45] + + + +RFC 959 October 1985 +File Transfer Protocol + + + RETR Retr retr ReTr rETr + + This also applies to any symbols representing parameter values, + such as A or a for ASCII TYPE. The command codes and the argument + fields are separated by one or more spaces. + + The argument field consists of a variable length character string + ending with the character sequence <CRLF> (Carriage Return, Line + Feed) for NVT-ASCII representation; for other negotiated languages + a different end of line character might be used. It should be + noted that the server is to take no action until the end of line + code is received. + + The syntax is specified below in NVT-ASCII. All characters in the + argument field are ASCII characters including any ASCII + represented decimal integers. Square brackets denote an optional + argument field. If the option is not taken, the appropriate + default is implied. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 46] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 5.3.1. FTP COMMANDS + + The following are the FTP commands: + + USER <SP> <username> <CRLF> + PASS <SP> <password> <CRLF> + ACCT <SP> <account-information> <CRLF> + CWD <SP> <pathname> <CRLF> + CDUP <CRLF> + SMNT <SP> <pathname> <CRLF> + QUIT <CRLF> + REIN <CRLF> + PORT <SP> <host-port> <CRLF> + PASV <CRLF> + TYPE <SP> <type-code> <CRLF> + STRU <SP> <structure-code> <CRLF> + MODE <SP> <mode-code> <CRLF> + RETR <SP> <pathname> <CRLF> + STOR <SP> <pathname> <CRLF> + STOU <CRLF> + APPE <SP> <pathname> <CRLF> + ALLO <SP> <decimal-integer> + [<SP> R <SP> <decimal-integer>] <CRLF> + REST <SP> <marker> <CRLF> + RNFR <SP> <pathname> <CRLF> + RNTO <SP> <pathname> <CRLF> + ABOR <CRLF> + DELE <SP> <pathname> <CRLF> + RMD <SP> <pathname> <CRLF> + MKD <SP> <pathname> <CRLF> + PWD <CRLF> + LIST [<SP> <pathname>] <CRLF> + NLST [<SP> <pathname>] <CRLF> + SITE <SP> <string> <CRLF> + SYST <CRLF> + STAT [<SP> <pathname>] <CRLF> + HELP [<SP> <string>] <CRLF> + NOOP <CRLF> + + + + + + + + + + + +Postel & Reynolds [Page 47] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 5.3.2. FTP COMMAND ARGUMENTS + + The syntax of the above argument fields (using BNF notation + where applicable) is: + + <username> ::= <string> + <password> ::= <string> + <account-information> ::= <string> + <string> ::= <char> | <char><string> + <char> ::= any of the 128 ASCII characters except <CR> and + <LF> + <marker> ::= <pr-string> + <pr-string> ::= <pr-char> | <pr-char><pr-string> + <pr-char> ::= printable characters, any + ASCII code 33 through 126 + <byte-size> ::= <number> + <host-port> ::= <host-number>,<port-number> + <host-number> ::= <number>,<number>,<number>,<number> + <port-number> ::= <number>,<number> + <number> ::= any decimal integer 1 through 255 + <form-code> ::= N | T | C + <type-code> ::= A [<sp> <form-code>] + | E [<sp> <form-code>] + | I + | L <sp> <byte-size> + <structure-code> ::= F | R | P + <mode-code> ::= S | B | C + <pathname> ::= <string> + <decimal-integer> ::= any decimal integer + + + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 48] + + + +RFC 959 October 1985 +File Transfer Protocol + + + 5.4. SEQUENCING OF COMMANDS AND REPLIES + + The communication between the user and server is intended to be an + alternating dialogue. As such, the user issues an FTP command and + the server responds with a prompt primary reply. The user should + wait for this initial primary success or failure response before + sending further commands. + + Certain commands require a second reply for which the user should + also wait. These replies may, for example, report on the progress + or completion of file transfer or the closing of the data + connection. They are secondary replies to file transfer commands. + + One important group of informational replies is the connection + greetings. Under normal circumstances, a server will send a 220 + reply, "awaiting input", when the connection is completed. The + user should wait for this greeting message before sending any + commands. If the server is unable to accept input right away, a + 120 "expected delay" reply should be sent immediately and a 220 + reply when ready. The user will then know not to hang up if there + is a delay. + + Spontaneous Replies + + Sometimes "the system" spontaneously has a message to be sent + to a user (usually all users). For example, "System going down + in 15 minutes". There is no provision in FTP for such + spontaneous information to be sent from the server to the user. + It is recommended that such information be queued in the + server-PI and delivered to the user-PI in the next reply + (possibly making it a multi-line reply). + + The table below lists alternative success and failure replies for + each command. These must be strictly adhered to; a server may + substitute text in the replies, but the meaning and action implied + by the code numbers and by the specific command reply sequence + cannot be altered. + + Command-Reply Sequences + + In this section, the command-reply sequence is presented. Each + command is listed with its possible replies; command groups are + listed together. Preliminary replies are listed first (with + their succeeding replies indented and under them), then + positive and negative completion, and finally intermediary + + + + +Postel & Reynolds [Page 49] + + + +RFC 959 October 1985 +File Transfer Protocol + + + replies with the remaining commands from the sequence + following. This listing forms the basis for the state + diagrams, which will be presented separately. + + Connection Establishment + 120 + 220 + 220 + 421 + Login + USER + 230 + 530 + 500, 501, 421 + 331, 332 + PASS + 230 + 202 + 530 + 500, 501, 503, 421 + 332 + ACCT + 230 + 202 + 530 + 500, 501, 503, 421 + CWD + 250 + 500, 501, 502, 421, 530, 550 + CDUP + 200 + 500, 501, 502, 421, 530, 550 + SMNT + 202, 250 + 500, 501, 502, 421, 530, 550 + Logout + REIN + 120 + 220 + 220 + 421 + 500, 502 + QUIT + 221 + 500 + + + + +Postel & Reynolds [Page 50] + + + +RFC 959 October 1985 +File Transfer Protocol + + + Transfer parameters + PORT + 200 + 500, 501, 421, 530 + PASV + 227 + 500, 501, 502, 421, 530 + MODE + 200 + 500, 501, 504, 421, 530 + TYPE + 200 + 500, 501, 504, 421, 530 + STRU + 200 + 500, 501, 504, 421, 530 + File action commands + ALLO + 200 + 202 + 500, 501, 504, 421, 530 + REST + 500, 501, 502, 421, 530 + 350 + STOR + 125, 150 + (110) + 226, 250 + 425, 426, 451, 551, 552 + 532, 450, 452, 553 + 500, 501, 421, 530 + STOU + 125, 150 + (110) + 226, 250 + 425, 426, 451, 551, 552 + 532, 450, 452, 553 + 500, 501, 421, 530 + RETR + 125, 150 + (110) + 226, 250 + 425, 426, 451 + 450, 550 + 500, 501, 421, 530 + + + + +Postel & Reynolds [Page 51] + + + +RFC 959 October 1985 +File Transfer Protocol + + + LIST + 125, 150 + 226, 250 + 425, 426, 451 + 450 + 500, 501, 502, 421, 530 + NLST + 125, 150 + 226, 250 + 425, 426, 451 + 450 + 500, 501, 502, 421, 530 + APPE + 125, 150 + (110) + 226, 250 + 425, 426, 451, 551, 552 + 532, 450, 550, 452, 553 + 500, 501, 502, 421, 530 + RNFR + 450, 550 + 500, 501, 502, 421, 530 + 350 + RNTO + 250 + 532, 553 + 500, 501, 502, 503, 421, 530 + DELE + 250 + 450, 550 + 500, 501, 502, 421, 530 + RMD + 250 + 500, 501, 502, 421, 530, 550 + MKD + 257 + 500, 501, 502, 421, 530, 550 + PWD + 257 + 500, 501, 502, 421, 550 + ABOR + 225, 226 + 500, 501, 502, 421 + + + + + + +Postel & Reynolds [Page 52] + + + +RFC 959 October 1985 +File Transfer Protocol + + + Informational commands + SYST + 215 + 500, 501, 502, 421 + STAT + 211, 212, 213 + 450 + 500, 501, 502, 421, 530 + HELP + 211, 214 + 500, 501, 502, 421 + Miscellaneous commands + SITE + 200 + 202 + 500, 501, 530 + NOOP + 200 + 500 421 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 53] + + + +RFC 959 October 1985 +File Transfer Protocol + + +6. STATE DIAGRAMS + + Here we present state diagrams for a very simple minded FTP + implementation. Only the first digit of the reply codes is used. + There is one state diagram for each group of FTP commands or command + sequences. + + The command groupings were determined by constructing a model for + each command then collecting together the commands with structurally + identical models. + + For each command or command sequence there are three possible + outcomes: success (S), failure (F), and error (E). In the state + diagrams below we use the symbol B for "begin", and the symbol W for + "wait for reply". + + We first present the diagram that represents the largest group of FTP + commands: + + + 1,3 +---+ + ----------->| E | + | +---+ + | + +---+ cmd +---+ 2 +---+ + | B |---------->| W |---------->| S | + +---+ +---+ +---+ + | + | 4,5 +---+ + ----------->| F | + +---+ + + + This diagram models the commands: + + ABOR, ALLO, DELE, CWD, CDUP, SMNT, HELP, MODE, NOOP, PASV, + QUIT, SITE, PORT, SYST, STAT, RMD, MKD, PWD, STRU, and TYPE. + + + + + + + + + + + + +Postel & Reynolds [Page 54] + + + +RFC 959 October 1985 +File Transfer Protocol + + + The other large group of commands is represented by a very similar + diagram: + + + 3 +---+ + ----------->| E | + | +---+ + | + +---+ cmd +---+ 2 +---+ + | B |---------->| W |---------->| S | + +---+ --->+---+ +---+ + | | | + | | | 4,5 +---+ + | 1 | ----------->| F | + ----- +---+ + + + This diagram models the commands: + + APPE, LIST, NLST, REIN, RETR, STOR, and STOU. + + Note that this second model could also be used to represent the first + group of commands, the only difference being that in the first group + the 100 series replies are unexpected and therefore treated as error, + while the second group expects (some may require) 100 series replies. + Remember that at most, one 100 series reply is allowed per command. + + The remaining diagrams model command sequences, perhaps the simplest + of these is the rename sequence: + + + +---+ RNFR +---+ 1,2 +---+ + | B |---------->| W |---------->| E | + +---+ +---+ -->+---+ + | | | + 3 | | 4,5 | + -------------- ------ | + | | | +---+ + | ------------->| S | + | | 1,3 | | +---+ + | 2| -------- + | | | | + V | | | + +---+ RNTO +---+ 4,5 ----->+---+ + | |---------->| W |---------->| F | + +---+ +---+ +---+ + + + +Postel & Reynolds [Page 55] + + + +RFC 959 October 1985 +File Transfer Protocol + + + The next diagram is a simple model of the Restart command: + + + +---+ REST +---+ 1,2 +---+ + | B |---------->| W |---------->| E | + +---+ +---+ -->+---+ + | | | + 3 | | 4,5 | + -------------- ------ | + | | | +---+ + | ------------->| S | + | | 3 | | +---+ + | 2| -------- + | | | | + V | | | + +---+ cmd +---+ 4,5 ----->+---+ + | |---------->| W |---------->| F | + +---+ -->+---+ +---+ + | | + | 1 | + ------ + + + Where "cmd" is APPE, STOR, or RETR. + + We note that the above three models are similar. The Restart differs + from the Rename two only in the treatment of 100 series replies at + the second stage, while the second group expects (some may require) + 100 series replies. Remember that at most, one 100 series reply is + allowed per command. + + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 56] + + + +RFC 959 October 1985 +File Transfer Protocol + + + The most complicated diagram is for the Login sequence: + + + 1 + +---+ USER +---+------------->+---+ + | B |---------->| W | 2 ---->| E | + +---+ +---+------ | -->+---+ + | | | | | + 3 | | 4,5 | | | + -------------- ----- | | | + | | | | | + | | | | | + | --------- | + | 1| | | | + V | | | | + +---+ PASS +---+ 2 | ------>+---+ + | |---------->| W |------------->| S | + +---+ +---+ ---------->+---+ + | | | | | + 3 | |4,5| | | + -------------- -------- | + | | | | | + | | | | | + | ----------- + | 1,3| | | | + V | 2| | | + +---+ ACCT +---+-- | ----->+---+ + | |---------->| W | 4,5 -------->| F | + +---+ +---+------------->+---+ + + + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 57] + + + +RFC 959 October 1985 +File Transfer Protocol + + + Finally, we present a generalized diagram that could be used to model + the command and reply interchange: + + + ------------------------------------ + | | + Begin | | + | V | + | +---+ cmd +---+ 2 +---+ | + -->| |------->| |---------->| | | + | | | W | | S |-----| + -->| | -->| |----- | | | + | +---+ | +---+ 4,5 | +---+ | + | | | | | | | + | | | 1| |3 | +---+ | + | | | | | | | | | + | | ---- | ---->| F |----- + | | | | | + | | | +---+ + ------------------- + | + | + V + End + + + + + + + + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 58] + + + +RFC 959 October 1985 +File Transfer Protocol + + +7. TYPICAL FTP SCENARIO + + User at host U wanting to transfer files to/from host S: + + In general, the user will communicate to the server via a mediating + user-FTP process. The following may be a typical scenario. The + user-FTP prompts are shown in parentheses, '---->' represents + commands from host U to host S, and '<----' represents replies from + host S to host U. + + LOCAL COMMANDS BY USER ACTION INVOLVED + + ftp (host) multics<CR> Connect to host S, port L, + establishing control connections. + <---- 220 Service ready <CRLF>. + username Doe <CR> USER Doe<CRLF>----> + <---- 331 User name ok, + need password<CRLF>. + password mumble <CR> PASS mumble<CRLF>----> + <---- 230 User logged in<CRLF>. + retrieve (local type) ASCII<CR> + (local pathname) test 1 <CR> User-FTP opens local file in ASCII. + (for. pathname) test.pl1<CR> RETR test.pl1<CRLF> ----> + <---- 150 File status okay; + about to open data + connection<CRLF>. + Server makes data connection + to port U. + + <---- 226 Closing data connection, + file transfer successful<CRLF>. + type Image<CR> TYPE I<CRLF> ----> + <---- 200 Command OK<CRLF> + store (local type) image<CR> + (local pathname) file dump<CR> User-FTP opens local file in Image. + (for.pathname) >udd>cn>fd<CR> STOR >udd>cn>fd<CRLF> ----> + <---- 550 Access denied<CRLF> + terminate QUIT <CRLF> ----> + Server closes all + connections. + +8. CONNECTION ESTABLISHMENT + + The FTP control connection is established via TCP between the user + process port U and the server process port L. This protocol is + assigned the service port 21 (25 octal), that is L=21. + + + +Postel & Reynolds [Page 59] + + + +RFC 959 October 1985 +File Transfer Protocol + + +APPENDIX I - PAGE STRUCTURE + + The need for FTP to support page structure derives principally from + the need to support efficient transmission of files between TOPS-20 + systems, particularly the files used by NLS. + + The file system of TOPS-20 is based on the concept of pages. The + operating system is most efficient at manipulating files as pages. + The operating system provides an interface to the file system so that + many applications view files as sequential streams of characters. + However, a few applications use the underlying page structures + directly, and some of these create holey files. + + A TOPS-20 disk file consists of four things: a pathname, a page + table, a (possibly empty) set of pages, and a set of attributes. + + The pathname is specified in the RETR or STOR command. It includes + the directory name, file name, file name extension, and generation + number. + + The page table contains up to 2**18 entries. Each entry may be + EMPTY, or may point to a page. If it is not empty, there are also + some page-specific access bits; not all pages of a file need have the + same access protection. + + A page is a contiguous set of 512 words of 36 bits each. + + The attributes of the file, in the File Descriptor Block (FDB), + contain such things as creation time, write time, read time, writer's + byte-size, end-of-file pointer, count of reads and writes, backup + system tape numbers, etc. + + Note that there is NO requirement that entries in the page table be + contiguous. There may be empty page table slots between occupied + ones. Also, the end of file pointer is simply a number. There is no + requirement that it in fact point at the "last" datum in the file. + Ordinary sequential I/O calls in TOPS-20 will cause the end of file + pointer to be left after the last datum written, but other operations + may cause it not to be so, if a particular programming system so + requires. + + In fact, in both of these special cases, "holey" files and + end-of-file pointers NOT at the end of the file, occur with NLS data + files. + + + + + +Postel & Reynolds [Page 60] + + + +RFC 959 October 1985 +File Transfer Protocol + + + The TOPS-20 paged files can be sent with the FTP transfer parameters: + TYPE L 36, STRU P, and MODE S (in fact, any mode could be used). + + Each page of information has a header. Each header field, which is a + logical byte, is a TOPS-20 word, since the TYPE is L 36. + + The header fields are: + + Word 0: Header Length. + + The header length is 5. + + Word 1: Page Index. + + If the data is a disk file page, this is the number of that + page in the file's page map. Empty pages (holes) in the file + are simply not sent. Note that a hole is NOT the same as a + page of zeros. + + Word 2: Data Length. + + The number of data words in this page, following the header. + Thus, the total length of the transmission unit is the Header + Length plus the Data Length. + + Word 3: Page Type. + + A code for what type of chunk this is. A data page is type 3, + the FDB page is type 2. + + Word 4: Page Access Control. + + The access bits associated with the page in the file's page + map. (This full word quantity is put into AC2 of an SPACS by + the program reading from net to disk.) + + After the header are Data Length data words. Data Length is + currently either 512 for a data page or 31 for an FDB. Trailing + zeros in a disk file page may be discarded, making Data Length less + than 512 in that case. + + + + + + + + + +Postel & Reynolds [Page 61] + + + +RFC 959 October 1985 +File Transfer Protocol + + +APPENDIX II - DIRECTORY COMMANDS + + Since UNIX has a tree-like directory structure in which directories + are as easy to manipulate as ordinary files, it is useful to expand + the FTP servers on these machines to include commands which deal with + the creation of directories. Since there are other hosts on the + ARPA-Internet which have tree-like directories (including TOPS-20 and + Multics), these commands are as general as possible. + + Four directory commands have been added to FTP: + + MKD pathname + + Make a directory with the name "pathname". + + RMD pathname + + Remove the directory with the name "pathname". + + PWD + + Print the current working directory name. + + CDUP + + Change to the parent of the current working directory. + + The "pathname" argument should be created (removed) as a + subdirectory of the current working directory, unless the "pathname" + string contains sufficient information to specify otherwise to the + server, e.g., "pathname" is an absolute pathname (in UNIX and + Multics), or pathname is something like "<abso.lute.path>" to + TOPS-20. + + REPLY CODES + + The CDUP command is a special case of CWD, and is included to + simplify the implementation of programs for transferring directory + trees between operating systems having different syntaxes for + naming the parent directory. The reply codes for CDUP be + identical to the reply codes of CWD. + + The reply codes for RMD be identical to the reply codes for its + file analogue, DELE. + + The reply codes for MKD, however, are a bit more complicated. A + freshly created directory will probably be the object of a future + + +Postel & Reynolds [Page 62] + + + +RFC 959 October 1985 +File Transfer Protocol + + + CWD command. Unfortunately, the argument to MKD may not always be + a suitable argument for CWD. This is the case, for example, when + a TOPS-20 subdirectory is created by giving just the subdirectory + name. That is, with a TOPS-20 server FTP, the command sequence + + MKD MYDIR + CWD MYDIR + + will fail. The new directory may only be referred to by its + "absolute" name; e.g., if the MKD command above were issued while + connected to the directory <DFRANKLIN>, the new subdirectory + could only be referred to by the name <DFRANKLIN.MYDIR>. + + Even on UNIX and Multics, however, the argument given to MKD may + not be suitable. If it is a "relative" pathname (i.e., a pathname + which is interpreted relative to the current directory), the user + would need to be in the same current directory in order to reach + the subdirectory. Depending on the application, this may be + inconvenient. It is not very robust in any case. + + To solve these problems, upon successful completion of an MKD + command, the server should return a line of the form: + + 257<space>"<directory-name>"<space><commentary> + + That is, the server will tell the user what string to use when + referring to the created directory. The directory name can + contain any character; embedded double-quotes should be escaped by + double-quotes (the "quote-doubling" convention). + + For example, a user connects to the directory /usr/dm, and creates + a subdirectory, named pathname: + + CWD /usr/dm + 200 directory changed to /usr/dm + MKD pathname + 257 "/usr/dm/pathname" directory created + + An example with an embedded double quote: + + MKD foo"bar + 257 "/usr/dm/foo""bar" directory created + CWD /usr/dm/foo"bar + 200 directory changed to /usr/dm/foo"bar + + + + + +Postel & Reynolds [Page 63] + + + +RFC 959 October 1985 +File Transfer Protocol + + + The prior existence of a subdirectory with the same name is an + error, and the server must return an "access denied" error reply + in that case. + + CWD /usr/dm + 200 directory changed to /usr/dm + MKD pathname + 521-"/usr/dm/pathname" directory already exists; + 521 taking no action. + + The failure replies for MKD are analogous to its file creating + cousin, STOR. Also, an "access denied" return is given if a file + name with the same name as the subdirectory will conflict with the + creation of the subdirectory (this is a problem on UNIX, but + shouldn't be one on TOPS-20). + + Essentially because the PWD command returns the same type of + information as the successful MKD command, the successful PWD + command uses the 257 reply code as well. + + SUBTLETIES + + Because these commands will be most useful in transferring + subtrees from one machine to another, carefully observe that the + argument to MKD is to be interpreted as a sub-directory of the + current working directory, unless it contains enough information + for the destination host to tell otherwise. A hypothetical + example of its use in the TOPS-20 world: + + CWD <some.where> + 200 Working directory changed + MKD overrainbow + 257 "<some.where.overrainbow>" directory created + CWD overrainbow + 431 No such directory + CWD <some.where.overrainbow> + 200 Working directory changed + + CWD <some.where> + 200 Working directory changed to <some.where> + MKD <unambiguous> + 257 "<unambiguous>" directory created + CWD <unambiguous> + + Note that the first example results in a subdirectory of the + connected directory. In contrast, the argument in the second + example contains enough information for TOPS-20 to tell that the + + +Postel & Reynolds [Page 64] + + + +RFC 959 October 1985 +File Transfer Protocol + + + <unambiguous> directory is a top-level directory. Note also that + in the first example the user "violated" the protocol by + attempting to access the freshly created directory with a name + other than the one returned by TOPS-20. Problems could have + resulted in this case had there been an <overrainbow> directory; + this is an ambiguity inherent in some TOPS-20 implementations. + Similar considerations apply to the RMD command. The point is + this: except where to do so would violate a host's conventions for + denoting relative versus absolute pathnames, the host should treat + the operands of the MKD and RMD commands as subdirectories. The + 257 reply to the MKD command must always contain the absolute + pathname of the created directory. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 65] + + + +RFC 959 October 1985 +File Transfer Protocol + + +APPENDIX III - RFCs on FTP + + Bhushan, Abhay, "A File Transfer Protocol", RFC 114 (NIC 5823), + MIT-Project MAC, 16 April 1971. + + Harslem, Eric, and John Heafner, "Comments on RFC 114 (A File + Transfer Protocol)", RFC 141 (NIC 6726), RAND, 29 April 1971. + + Bhushan, Abhay, et al, "The File Transfer Protocol", RFC 172 + (NIC 6794), MIT-Project MAC, 23 June 1971. + + Braden, Bob, "Comments on DTP and FTP Proposals", RFC 238 (NIC 7663), + UCLA/CCN, 29 September 1971. + + Bhushan, Abhay, et al, "The File Transfer Protocol", RFC 265 + (NIC 7813), MIT-Project MAC, 17 November 1971. + + McKenzie, Alex, "A Suggested Addition to File Transfer Protocol", + RFC 281 (NIC 8163), BBN, 8 December 1971. + + Bhushan, Abhay, "The Use of "Set Data Type" Transaction in File + Transfer Protocol", RFC 294 (NIC 8304), MIT-Project MAC, + 25 January 1972. + + Bhushan, Abhay, "The File Transfer Protocol", RFC 354 (NIC 10596), + MIT-Project MAC, 8 July 1972. + + Bhushan, Abhay, "Comments on the File Transfer Protocol (RFC 354)", + RFC 385 (NIC 11357), MIT-Project MAC, 18 August 1972. + + Hicks, Greg, "User FTP Documentation", RFC 412 (NIC 12404), Utah, + 27 November 1972. + + Bhushan, Abhay, "File Transfer Protocol (FTP) Status and Further + Comments", RFC 414 (NIC 12406), MIT-Project MAC, 20 November 1972. + + Braden, Bob, "Comments on File Transfer Protocol", RFC 430 + (NIC 13299), UCLA/CCN, 7 February 1973. + + Thomas, Bob, and Bob Clements, "FTP Server-Server Interaction", + RFC 438 (NIC 13770), BBN, 15 January 1973. + + Braden, Bob, "Print Files in FTP", RFC 448 (NIC 13299), UCLA/CCN, + 27 February 1973. + + McKenzie, Alex, "File Transfer Protocol", RFC 454 (NIC 14333), BBN, + 16 February 1973. + + +Postel & Reynolds [Page 66] + + + +RFC 959 October 1985 +File Transfer Protocol + + + Bressler, Bob, and Bob Thomas, "Mail Retrieval via FTP", RFC 458 + (NIC 14378), BBN-NET and BBN-TENEX, 20 February 1973. + + Neigus, Nancy, "File Transfer Protocol", RFC 542 (NIC 17759), BBN, + 12 July 1973. + + Krilanovich, Mark, and George Gregg, "Comments on the File Transfer + Protocol", RFC 607 (NIC 21255), UCSB, 7 January 1974. + + Pogran, Ken, and Nancy Neigus, "Response to RFC 607 - Comments on the + File Transfer Protocol", RFC 614 (NIC 21530), BBN, 28 January 1974. + + Krilanovich, Mark, George Gregg, Wayne Hathaway, and Jim White, + "Comments on the File Transfer Protocol", RFC 624 (NIC 22054), UCSB, + Ames Research Center, SRI-ARC, 28 February 1974. + + Bhushan, Abhay, "FTP Comments and Response to RFC 430", RFC 463 + (NIC 14573), MIT-DMCG, 21 February 1973. + + Braden, Bob, "FTP Data Compression", RFC 468 (NIC 14742), UCLA/CCN, + 8 March 1973. + + Bhushan, Abhay, "FTP and Network Mail System", RFC 475 (NIC 14919), + MIT-DMCG, 6 March 1973. + + Bressler, Bob, and Bob Thomas "FTP Server-Server Interaction - II", + RFC 478 (NIC 14947), BBN-NET and BBN-TENEX, 26 March 1973. + + White, Jim, "Use of FTP by the NIC Journal", RFC 479 (NIC 14948), + SRI-ARC, 8 March 1973. + + White, Jim, "Host-Dependent FTP Parameters", RFC 480 (NIC 14949), + SRI-ARC, 8 March 1973. + + Padlipsky, Mike, "An FTP Command-Naming Problem", RFC 506 + (NIC 16157), MIT-Multics, 26 June 1973. + + Day, John, "Memo to FTP Group (Proposal for File Access Protocol)", + RFC 520 (NIC 16819), Illinois, 25 June 1973. + + Merryman, Robert, "The UCSD-CC Server-FTP Facility", RFC 532 + (NIC 17451), UCSD-CC, 22 June 1973. + + Braden, Bob, "TENEX FTP Problem", RFC 571 (NIC 18974), UCLA/CCN, + 15 November 1973. + + + + +Postel & Reynolds [Page 67] + + + +RFC 959 October 1985 +File Transfer Protocol + + + McKenzie, Alex, and Jon Postel, "Telnet and FTP Implementation - + Schedule Change", RFC 593 (NIC 20615), BBN and MITRE, + 29 November 1973. + + Sussman, Julie, "FTP Error Code Usage for More Reliable Mail + Service", RFC 630 (NIC 30237), BBN, 10 April 1974. + + Postel, Jon, "Revised FTP Reply Codes", RFC 640 (NIC 30843), + UCLA/NMC, 5 June 1974. + + Harvey, Brian, "Leaving Well Enough Alone", RFC 686 (NIC 32481), + SU-AI, 10 May 1975. + + Harvey, Brian, "One More Try on the FTP", RFC 691 (NIC 32700), SU-AI, + 28 May 1975. + + Lieb, J., "CWD Command of FTP", RFC 697 (NIC 32963), 14 July 1975. + + Harrenstien, Ken, "FTP Extension: XSEN", RFC 737 (NIC 42217), SRI-KL, + 31 October 1977. + + Harrenstien, Ken, "FTP Extension: XRSQ/XRCP", RFC 743 (NIC 42758), + SRI-KL, 30 December 1977. + + Lebling, P. David, "Survey of FTP Mail and MLFL", RFC 751, MIT, + 10 December 1978. + + Postel, Jon, "File Transfer Protocol Specification", RFC 765, ISI, + June 1980. + + Mankins, David, Dan Franklin, and Buzz Owen, "Directory Oriented FTP + Commands", RFC 776, BBN, December 1980. + + Padlipsky, Michael, "FTP Unique-Named Store Command", RFC 949, MITRE, + July 1985. + + + + + + + + + + + + + + +Postel & Reynolds [Page 68] + + + +RFC 959 October 1985 +File Transfer Protocol + + +REFERENCES + + [1] Feinler, Elizabeth, "Internet Protocol Transition Workbook", + Network Information Center, SRI International, March 1982. + + [2] Postel, Jon, "Transmission Control Protocol - DARPA Internet + Program Protocol Specification", RFC 793, DARPA, September 1981. + + [3] Postel, Jon, and Joyce Reynolds, "Telnet Protocol + Specification", RFC 854, ISI, May 1983. + + [4] Reynolds, Joyce, and Jon Postel, "Assigned Numbers", RFC 943, + ISI, April 1985. + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Postel & Reynolds [Page 69] + diff --git a/lib/ftp/doc/html/.gitignore b/lib/ftp/doc/html/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/ftp/doc/html/.gitignore diff --git a/lib/ftp/doc/man3/.gitignore b/lib/ftp/doc/man3/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/ftp/doc/man3/.gitignore diff --git a/lib/ftp/doc/man6/.gitignore b/lib/ftp/doc/man6/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/ftp/doc/man6/.gitignore diff --git a/lib/ftp/doc/pdf/.gitignore b/lib/ftp/doc/pdf/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/ftp/doc/pdf/.gitignore diff --git a/lib/ftp/doc/src/Makefile b/lib/ftp/doc/src/Makefile new file mode 100644 index 0000000000..20fbbc73a9 --- /dev/null +++ b/lib/ftp/doc/src/Makefile @@ -0,0 +1,155 @@ +# +# %CopyrightBegin% +# +# Copyright Ericsson AB 1997-2018. All Rights Reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# %CopyrightEnd% +# +# +include $(ERL_TOP)/make/target.mk +include $(ERL_TOP)/make/$(TARGET)/otp.mk + +# ---------------------------------------------------- +# Application version +# ---------------------------------------------------- +include ../../vsn.mk +VSN=$(FTP_VSN) + +# ---------------------------------------------------- +# Release directory specification +# ---------------------------------------------------- +RELSYSDIR = $(RELEASE_PATH)/lib/$(APPLICATION)-$(VSN) + + +# ---------------------------------------------------- +# Target Specs +# ---------------------------------------------------- +XML_APPLICATION_FILES = ref_man.xml + +XML_CHAPTER_FILES = \ + introduction.xml \ + ftp_client.xml \ + notes.xml + +XML_REF3_FILES = \ + ftp.xml + +XML_PART_FILES = \ + part.xml + +BOOK_FILES = book.xml + +XML_FILES = \ + $(BOOK_FILES) \ + $(XML_CHAPTER_FILES) \ + $(XML_PART_FILES) \ + $(XML_REF6_FILES) \ + $(XML_REF3_FILES) \ + $(XML_APPLICATION_FILES) + +# GIF_FILES = ftp.gif + + +# ---------------------------------------------------- + +HTML_FILES = \ + $(XML_APPLICATION_FILES:%.xml=$(HTMLDIR)/%.html) \ + $(XML_PART_FILES:%.xml=$(HTMLDIR)/%.html) + +INFO_FILE = ../../info +EXTRA_FILES = \ + $(XML_REF3_FILES:%.xml=$(HTMLDIR)/%.html) \ + $(XML_REF6_FILES:%.xml=$(HTMLDIR)/%.html) \ + $(XML_CHAPTER_FILES:%.xml=$(HTMLDIR)/%.html) + +MAN3_FILES = $(XML_REF3_FILES:%.xml=$(MAN3DIR)/%.3) + +HTML_REF_MAN_FILE = $(HTMLDIR)/index.html + +TOP_PDF_FILE = $(PDFDIR)/$(APPLICATION)-$(VSN).pdf + +# ---------------------------------------------------- +# FLAGS +# ---------------------------------------------------- +XML_FLAGS += +DVIPS_FLAGS += + +# ---------------------------------------------------- +# Targets +# ---------------------------------------------------- +$(HTMLDIR)/%.gif: %.gif + $(INSTALL_DATA) $< $@ + +docs: pdf html man + +ldocs: local_docs + +$(TOP_PDF_FILE): $(XML_FILES) + +pdf: $(TOP_PDF_FILE) + +html: gifs $(HTML_REF_MAN_FILE) + +clean clean_docs: clean_html clean_man clean_pdf + rm -rf $(XMLDIR) + rm -f errs core *~ + +man: $(MAN3_FILES) + +gifs: $(GIF_FILES:%=$(HTMLDIR)/%) + +debug opt: + +clean_pdf: + rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) + +clean_html: + rm -rf $(TOP_HTML_FILES) $(HTMLDIR)/* + +clean_man: + rm -f $(MAN3_FILES) + + +# ---------------------------------------------------- +# Release Target +# ---------------------------------------------------- +include $(ERL_TOP)/make/otp_release_targets.mk + +release_docs_spec: docs + $(INSTALL_DIR) "$(RELSYSDIR)/doc/pdf" + $(INSTALL_DATA) $(TOP_PDF_FILE) "$(RELSYSDIR)/doc/pdf" + $(INSTALL_DIR) "$(RELSYSDIR)/doc/html" + $(INSTALL_DATA) $(HTMLDIR)/* "$(RELSYSDIR)/doc/html" + $(INSTALL_DATA) $(INFO_FILE) "$(RELSYSDIR)" + $(INSTALL_DIR) "$(RELEASE_PATH)/man/man3" + $(INSTALL_DATA) $(MAN3DIR)/* "$(RELEASE_PATH)/man/man3" + +release_spec: + +info: + @echo "GIF_FILES:\n$(GIF_FILES)" + @echo "" + @echo "EXTRA_FILES:\n$(EXTRA_FILES)" + @echo "" + @echo "HTML_FILES:\n$(HTML_FILES)" + @echo "" + @echo "TOP_HTML_FILES:\n$(TOP_HTML_FILES)" + @echo "" + @echo "XML_REF3_FILES:\n$(XML_REF3_FILES)" + @echo "" + @echo "XML_REF6_FILES:\n$(XML_REF6_FILES)" + @echo "" + @echo "XML_CHAPTER_FILES:\n$(XML_CHAPTER_FILES)" + @echo "" diff --git a/lib/ftp/doc/src/book.xml b/lib/ftp/doc/src/book.xml new file mode 100644 index 0000000000..1268af64bf --- /dev/null +++ b/lib/ftp/doc/src/book.xml @@ -0,0 +1,49 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE book SYSTEM "book.dtd"> + +<book xmlns:xi="http://www.w3.org/2001/XInclude"> + <header titlestyle="normal"> + <copyright> + <year>1997</year><year>2018</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>FTP</title> + <prepared>Péter Dimitrov</prepared> + <docno></docno> + <date>2018-02-26</date> + <rev>1.0</rev> + <file>book.sgml</file> + </header> + <insidecover> + </insidecover> + <pagetext>FTP</pagetext> + <preamble> + <contents level="2"></contents> + </preamble> + <parts lift="no"> + <xi:include href="part.xml"/> + </parts> + <applications> + <xi:include href="ref_man.xml"/> + </applications> + <releasenotes> + <xi:include href="notes.xml"/> + </releasenotes> + <listofterms></listofterms> + <index></index> +</book> diff --git a/lib/ftp/doc/src/ftp.xml b/lib/ftp/doc/src/ftp.xml new file mode 100644 index 0000000000..9645b03364 --- /dev/null +++ b/lib/ftp/doc/src/ftp.xml @@ -0,0 +1,983 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE erlref SYSTEM "erlref.dtd"> + +<erlref> + <header> + <copyright> + <year>1997</year><year>2018</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>ftp</title> + <prepared>Peter Högfeldt</prepared> + <docno></docno> + <date>1997-11-05</date> + <rev>B</rev> + <file>ftp.xml</file> + </header> + <module since="">ftp</module> + <modulesummary>A File Transfer Protocol client.</modulesummary> + + <description> + + <p>This module implements a client for file transfer + according to a subset of the File Transfer Protocol (FTP), see + <url href="http://www.ietf.org/rfc/rfc959.txt">RFC 959</url>.</p> + + <p>The FTP client always tries to use passive FTP mode and only resort + to active FTP mode if this fails. This default behavior can be + changed by start option <seealso marker="#mode">mode</seealso>.</p> + + <marker id="two_start"></marker> + + <p>An FTP client can be started in two ways. One is using the + <seealso marker="#service_start">service_start</seealso> function, + the other is to start it directly as a standalone process + using function <seealso marker="#open">open</seealso>.</p> + + <p>For a simple example of an FTP session, see + <seealso marker="ftp_client">FTP User's Guide</seealso>.</p> + + <p>In addition to the ordinary functions for receiving and sending + files (see <c>recv/2</c>, <c>recv/3</c>, <c>send/2</c>, and + <c>send/3</c>) there are functions for receiving remote files as + binaries (see <c>recv_bin/2</c>) and for sending binaries to be + stored as remote files (see <c>send_bin/3</c>).</p> + + <p>A set of functions is provvided for sending and receiving + contiguous parts of a file to be stored in a remote file. For send, + see <c>send_chunk_start/2</c>, <c>send_chunk/2</c>, and + <c>send_chunk_end/1</c>. For receive, see + <c>recv_chunk_start/2</c> and <c>recv_chunk/</c>).</p> + + <p>The return values of the following functions depend + much on the implementation of the FTP server at the remote + host. In particular, the results from <c>ls</c> and <c>nlist</c> + varies. Often real errors are not reported as errors by <c>ls</c>, + even if, for example, a file or directory does not + exist. <c>nlist</c> is usually more strict, but some + implementations have the peculiar behaviour of responding with an + error if the request is a listing of the contents of a directory + that exists but is empty.</p> + + <marker id="service_start"></marker> + </description> + + <section> + <title>FTP CLIENT SERVICE START/STOP</title> + + <p>The FTP client can be started and stopped dynamically in runtime by + calling the <c>ftp</c> application API + <c>ftp:start_service(ServiceConfig)</c> and + <c>ftp:stop_service(Pid)</c>.</p> + + <p>The available configuration options are as follows:</p> + + <taglist> + <tag>{host, Host}</tag> + <item> + <marker id="host"></marker> + <p>Host = <c>string() | ip_address()</c></p> + </item> + + <tag>{port, Port}</tag> + <item> + <marker id="port"></marker> + <p>Port = <c>integer() > 0</c></p> + <p>Default is <c>21</c>.</p> + </item> + + <tag>{mode, Mode}</tag> + <item> + <marker id="mode"></marker> + <p>Mode = <c>active | passive</c></p> + <p>Default is <c>passive</c>.</p> + </item> + + <tag>{verbose, Verbose}</tag> + <item> + <marker id="verbose"></marker> + <p>Verbose = <c>boolean()</c> </p> + <p>Determines if the FTP communication is to be + verbose or not.</p> + <p>Default is <c>false</c>.</p> + </item> + + <tag>{debug, Debug}</tag> + <item> + <marker id="debug"></marker> + <p>Debug = <c>trace | debug | disable</c> </p> + <p>Debugging using the dbg toolkit. </p> + <p>Default is <c>disable</c>.</p> + </item> + + <tag>{ipfamily, IpFamily}</tag> + <item> + <marker id="ipfamily"></marker> + <p>IpFamily = <c>inet | inet6 | inet6fb4</c> </p> + <p>With <c>inet6fb4</c> the client behaves as before, that is, + tries to use IPv6, and only if that does not work it + uses IPv4).</p> + <p>Default is <c>inet</c> (IPv4).</p> + </item> + + <tag>{timeout, Timeout}</tag> + <item> + <marker id="timeout"></marker> + <p>Timeout = <c>non_neg_integer()</c></p> + <p>Connection time-out.</p> + <p>Default is <c>60000</c> (milliseconds).</p> + </item> + + <tag>{dtimeout, DTimeout}</tag> + <item> + <marker id="dtimeout"></marker> + <p>DTimeout = <c>non_neg_integer() | infinity</c> </p> + <p>Data connect time-out. + The time the client waits for the server to connect to the + data socket.</p> + <p>Default is <c>infinity</c>. </p> + </item> + + <tag>{progress, Progress}</tag> + <item> + <marker id="progress"></marker> + <p>Progress = <c>ignore | {CBModule, CBFunction, InitProgress}</c></p> + <p><c>CBModule = atom()</c>, <c>CBFunction = atom()</c></p> + <p><c>InitProgress = term()</c></p> + <p>Default is <c>ignore</c>.</p> + </item> + + </taglist> + + <p>Option <c>progress</c> is intended to be used by applications that + want to create some type of progress report, such as a progress bar in + a GUI. Default for the progress option is <c>ignore</c>, + that is, the option is not used. When the progress option is + specified, the following happens when <c>ftp:send/[3,4]</c> or + <c>ftp:recv/[3,4]</c> are called:</p> + + <list type="bulleted"> + <item> + <p>Before a file is transferred, the following call is + made to indicate the start of the file transfer and how large + the file is. The return value of the callback function + is to be a new value for the <c>UserProgressTerm</c> that will + be used as input the next time the callback function is + called.</p> + <p><c> + CBModule:CBFunction(InitProgress, File, {file_size, FileSize}) + </c></p> + </item> + + <item> + <p>Every time a chunk of bytes is transferred the + following call is made:</p> + <p><c> + CBModule:CBFunction(UserProgressTerm, File, {transfer_size, TransferSize}) + </c></p> + </item> + + <item> + <p>At the end of the file the following call is + made to indicate the end of the transfer:</p> + <p><c> + CBModule:CBFunction(UserProgressTerm, File, {transfer_size, 0}) + </c></p> + </item> + </list> + + <p>The callback function is to be defined as follows:</p> + + <p><c> + CBModule:CBFunction(UserProgressTerm, File, Size) -> UserProgressTerm + </c></p> + + <p><c> + CBModule = CBFunction = atom() + </c></p> + + <p><c> + UserProgressTerm = term() + </c></p> + + <p><c> + File = string() + </c></p> + + <p><c> + Size = {transfer_size, integer()} | {file_size, integer()} | {file_size, unknown} + </c></p> + + <p>For remote files, <c>ftp</c> cannot determine the + file size in a platform independent way. In this case the size + becomes <c>unknown</c> and it is left to the application to + determine the size.</p> + + <note> + <p>The callback is made by a middleman process, hence the + file transfer is not affected by the code in the progress + callback function. If the callback crashes, this is + detected by the FTP connection process, which then prints an + info-report and goes on as if the progress option was set + to <c>ignore</c>.</p> + </note> + + <p>The file transfer type is set to the default of the FTP server + when the session is opened. This is usually ASCCI mode. + </p> + + <p>The current local working directory (compare <c>lpwd/1</c>) is set + to the value reported by <c>file:get_cwd/1</c>, the wanted + local directory. + </p> + + <p>The return value <c>Pid</c> is used as a reference to the + newly created FTP client in all other functions, and they are to + be called by the process that created the connection. The FTP + client process monitors the process that created it and + terminates if that process terminates.</p> + </section> + + <section> + <title>DATA TYPES</title> + <p>The following type definitions are used by more than one + function in the FTP client API:</p> + <p><c>pid()</c> = identifier of an FTP connection</p> + <p><c>string()</c> = list of ASCII characters</p> + <p><c>shortage_reason()</c> = <c>etnospc | epnospc</c></p> + <p><c>restriction_reason()</c> = <c>epath | efnamena | elogin | enotbinary</c> + - all restrictions are not always relevant to all functions + </p> + <p><c>common_reason()</c> = <c>econn | eclosed | term()</c> + - some explanation of what went wrong</p> + + <marker id="account"></marker> + </section> + + <funcs> + + <func> + <name since="">account(Pid, Account) -> ok | {error, Reason}</name> + <fsummary>Specifies which account to use.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Account = string()</v> + <v>Reason = eacct | common_reason()</v> + </type> + <desc> + <p>Sets the account for an operation, if needed.</p> + + <marker id="append"></marker> + <marker id="append2"></marker> + <marker id="append3"></marker> + </desc> + </func> + + <func> + <name since="">append(Pid, LocalFile) -> </name> + <name since="">append(Pid, LocalFile, RemoteFile) -> ok | {error, Reason}</name> + <fsummary>Transfers a file to remote server, and appends it to + <c>Remotefile</c>.</fsummary> + <type> + <v>Pid = pid()</v> + <v>LocalFile = RemoteFile = string()</v> + <v>Reason = epath | elogin | etnospc | epnospc | efnamena | common_reason</v> + </type> + <desc> + <p>Transfers the file <c>LocalFile</c> to the remote server. If + <c>RemoteFile</c> is specified, the name of the remote file that the + file is appended to is set to <c>RemoteFile</c>, otherwise + to <c>LocalFile</c>. If the file does not exists, + it is created.</p> + + <marker id="append_bin"></marker> + </desc> + </func> + + <func> + <name since="">append_bin(Pid, Bin, RemoteFile) -> ok | {error, Reason}</name> + <fsummary>Transfers a binary into a remote file.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Bin = binary()</v> + <v>RemoteFile = string()</v> + <v>Reason = restriction_reason()| shortage_reason() | common_reason()</v> + </type> + <desc> + <p>Transfers the binary <c>Bin</c> to the remote server and appends + it to the file <c>RemoteFile</c>. If the file does not exist, it + is created.</p> + + <marker id="append_chunk"></marker> + </desc> + </func> + + <func> + <name since="">append_chunk(Pid, Bin) -> ok | {error, Reason}</name> + <fsummary>Appends a chunk to the remote file.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Bin = binary()</v> + <v>Reason = echunk | restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Transfers the chunk <c>Bin</c> to the remote server, which + appends it to the file specified in the call to + <c>append_chunk_start/2</c>.</p> + <p>For some errors, for example, file system full, it is + necessary to call <c>append_chunk_end</c> to get the + proper reason.</p> + + <marker id="append_chunk_start"></marker> + </desc> + </func> + + <func> + <name since="">append_chunk_start(Pid, File) -> ok | {error, Reason}</name> + <fsummary>Starts transfer of file chunks for appending to <c>File</c>.</fsummary> + <type> + <v>Pid = pid()</v> + <v>File = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Starts the transfer of chunks for appending to the file + <c>File</c> at the remote server. If the file does not exist, + it is created.</p> + + <marker id="append_chunk_end"></marker> + </desc> + </func> + + <func> + <name since="">append_chunk_end(Pid) -> ok | {error, Reason}</name> + <fsummary>Stops transfer of chunks for appending.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Reason = echunk | restriction_reason() | shortage_reason() </v> + </type> + <desc> + <p>Stops transfer of chunks for appending to the remote server. + The file at the remote server, specified in the call to + <c>append_chunk_start/2</c>, is closed by the server.</p> + + <marker id="cd"></marker> + </desc> + </func> + + <func> + <name since="">cd(Pid, Dir) -> ok | {error, Reason}</name> + <fsummary>Changes remote working directory.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Dir = string()</v> + <v>Reason = restriction_reason() | common_reason() </v> + </type> + <desc> + <p>Changes the working directory at the remote server to + <c>Dir</c>.</p> + + <marker id="close"></marker> + </desc> + </func> + + <func> + <name since="">close(Pid) -> ok</name> + <fsummary>Ends the FTP session.</fsummary> + <type> + <v>Pid = pid()</v> + </type> + <desc> + <p>Ends an FTP session, created using function + <seealso marker="#open">open</seealso>.</p> + + <marker id="delete"></marker> + </desc> + </func> + + <func> + <name since="">delete(Pid, File) -> ok | {error, Reason}</name> + <fsummary>Deletes a file at the remote server.</fsummary> + <type> + <v>Pid = pid()</v> + <v>File = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Deletes the file <c>File</c> at the remote server.</p> + + <marker id="append"></marker> + </desc> + </func> + + <func> + <name since="">formaterror(Tag) -> string()</name> + <fsummary>Returns error diagnostics.</fsummary> + <type> + <v>Tag = {error, atom()} | atom()</v> + </type> + <desc> + <p>Given an error return value <c>{error, AtomReason}</c>, + this function returns a readable string describing the error.</p> + + <marker id="lcd"></marker> + </desc> + </func> + + <func> + <name since="">lcd(Pid, Dir) -> ok | {error, Reason}</name> + <fsummary>Changes local working directory.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Dir = string()</v> + <v>Reason = restriction_reason()</v> + </type> + <desc> + <p>Changes the working directory to <c>Dir</c> for the local client.</p> + + <marker id="lpwd"></marker> + </desc> + </func> + + <func> + <name since="">lpwd(Pid) -> {ok, Dir}</name> + <fsummary>Gets local current working directory.</fsummary> + <type> + <v>Pid = pid()</v> + </type> + <desc> + <p>Returns the current working directory at the local client.</p> + + <marker id="ls"></marker> + <marker id="ls1"></marker> + <marker id="ls2"></marker> + </desc> + </func> + + <func> + <name since="">ls(Pid) -> </name> + <name since="">ls(Pid, Pathname) -> {ok, Listing} | {error, Reason}</name> + <fsummary>List of files.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Pathname = string()</v> + <v>Listing = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Returns a list of files in long format.</p> + <p><c>Pathname</c> can be a directory, a group of files, or + a file. The <c>Pathname</c> string can contain wildcards.</p> + <p><c>ls/1</c> implies the current remote directory of the user.</p> + <p>The format of <c>Listing</c> depends on the operating system. + On UNIX, it is typically produced from the output of the + <c>ls -l</c> shell command.</p> + + <marker id="mkdir"></marker> + </desc> + </func> + + <func> + <name since="">mkdir(Pid, Dir) -> ok | {error, Reason}</name> + <fsummary>Creates a remote directory.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Dir = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Creates the directory <c>Dir</c> at the remote server.</p> + + <marker id="nlist"></marker> + <marker id="nlist1"></marker> + <marker id="nlist2"></marker> + </desc> + </func> + + <func> + <name since="">nlist(Pid) -> </name> + <name since="">nlist(Pid, Pathname) -> {ok, Listing} | {error, Reason}</name> + <fsummary>List of files.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Pathname = string()</v> + <v>Listing = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Returns a list of files in short format.</p> + <p><c>Pathname</c> can be a directory, a group of files, or + a file. The <c>Pathname</c> string can contain wildcards.</p> + <p><c>nlist/1</c> implies the current remote directory of the user.</p> + <p>The format of <c>Listing</c> is a stream of + filenames where each filename is separated by <CRLF> or + <NL>. Contrary to function <c>ls</c>, the purpose of + <c>nlist</c> is to enable a program to + process filename information automatically.</p> + + <marker id="open"></marker> + </desc> + </func> + + <func> + <name since="">open(Host) -> {ok, Pid} | {error, Reason}</name> + <name since="">open(Host, Opts) -> {ok, Pid} | {error, Reason}</name> + <fsummary>Starts a standalone FTP client.</fsummary> + <type> + <v>Host = string() | ip_address()</v> + <v>Opts = options()</v> + <v>options() = [option()]</v> + <v>option() = start_option() | open_option()</v> + <v>start_option() = {verbose, verbose()} | {debug, debug()}</v> + <v>verbose() = boolean() (default is false)</v> + <v>debug() = disable | debug | trace (default is disable)</v> + <v>open_option() = {ipfamily, ipfamily()} | {port, port()} | {mode, mode()} | {tls, tls_options()} | {timeout, timeout()} | {dtimeout, dtimeout()} | {progress, progress() | {sock_ctrl, sock_opts()} | {sock_data_act, sock_opts()} | {sock_data_pass, sock_opts()} }</v> + <v>ipfamily() = inet | inet6 | inet6fb4 (default is inet)</v> + <v>port() = integer() > 0 (default is 21)</v> + <v>mode() = active | passive (default is passive)</v> + <v>tls_options() = [<seealso marker="ssl:ssl#type-tls_option">ssl:tls_option()</seealso>]</v> + <v>sock_opts() = [<seealso marker="kernel:gen_tcp#type-option">gen_tcp:option()</seealso> except for ipv6_v6only, active, packet, mode, packet_size and header</v> + <v>timeout() = integer() > 0 (default is 60000 milliseconds)</v> + <v>dtimeout() = integer() > 0 | infinity (default is infinity)</v> + <v>pogress() = ignore | {module(), function(), initial_data()} (default is ignore)</v> + <v>module() = atom()</v> + <v>function() = atom()</v> + <v>initial_data() = term()</v> + <v>Reason = ehost | term()</v> + </type> + + <desc> + <p>Starts a standalone FTP client process + (without the <c>ftp</c> service framework) and + opens a session with the FTP server at <c>Host</c>. </p> + + <p>If option <c>{tls, tls_options()}</c> is present, the FTP session + is transported over <c>tls</c> (<c>ftps</c>, see + <url href="http://www.ietf.org/rfc/rfc4217.txt">RFC 4217</url>). + The list <c>tls_options()</c> can be empty. The function + <seealso marker="ssl:ssl#connect/3"><c>ssl:connect/3</c></seealso> + is used for securing both the control connection and the data sessions. + </p> + + <p>The options <c>sock_ctrl</c>, <c>sock_data_act</c> and <c>sock_data_pass</c> passes options down to + the underlying transport layer (tcp). The default value for <c>sock_ctrl</c> is <c>[]</c>. Both + <c>sock_data_act</c> and <c>sock_data_pass</c> uses the value of <c>sock_ctrl</c> as default value. + </p> + + <p>A session opened in this way is closed using function + <seealso marker="#close">close</seealso>.</p> + + <marker id="pwd"></marker> + </desc> + </func> + + <func> + <name since="">pwd(Pid) -> {ok, Dir} | {error, Reason}</name> + <fsummary>Gets the remote current working directory.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Returns the current working directory at the remote server.</p> + + <marker id="recv"></marker> + <marker id="recv2"></marker> + <marker id="recv3"></marker> + </desc> + </func> + + <func> + <name since="">recv(Pid, RemoteFile) -> </name> + <name since="">recv(Pid, RemoteFile, LocalFile) -> ok | {error, Reason}</name> + <fsummary>Transfers a file from remote server.</fsummary> + <type> + <v>Pid = pid()</v> + <v>RemoteFile = LocalFile = string()</v> + <v>Reason = restriction_reason() | common_reason() | file_write_error_reason() </v> + <v>file_write_error_reason() = see file:write/2</v> + </type> + <desc> + <p>Transfers the file <c>RemoteFile</c> from the remote server + to the file system of the local client. If + <c>LocalFile</c> is specified, the local file will be + <c>LocalFile</c>, otherwise + <c>RemoteFile</c>.</p> + <p>If the file write fails (for example, <c>enospc</c>), the command is + aborted and <c>{error, file_write_error_reason()}</c> is returned. + However, the file is <em>not</em> removed.</p> + + <marker id="recv_bin"></marker> + </desc> + </func> + + <func> + <name since="">recv_bin(Pid, RemoteFile) -> {ok, Bin} | {error, Reason}</name> + <fsummary>Transfers a file from remote server as a binary.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Bin = binary()</v> + <v>RemoteFile = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Transfers the file <c>RemoteFile</c> from the remote server and + receives it as a binary.</p> + + <marker id="recv_chunk_start"></marker> + </desc> + </func> + + <func> + <name since="">recv_chunk_start(Pid, RemoteFile) -> ok | {error, Reason}</name> + <fsummary>Starts chunk-reading of the remote file.</fsummary> + <type> + <v>Pid = pid()</v> + <v>RemoteFile = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Starts transfer of the file <c>RemoteFile</c> from the + remote server.</p> + + <marker id="recv_chunk"></marker> + </desc> + </func> + + <func> + <name since="">recv_chunk(Pid) -> ok | {ok, Bin} | {error, Reason}</name> + <fsummary>Receives a chunk of the remote file.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Bin = binary()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Receives a chunk of the remote file (<c>RemoteFile</c> of + <c>recv_chunk_start</c>). The return values have the following + meaning:</p> + <list type="bulleted"> + <item><c>ok</c> = the transfer is complete.</item> + <item><c>{ok, Bin}</c> = just another chunk of the file.</item> + <item><c>{error, Reason}</c> = transfer failed.</item> + </list> + + <marker id="rename"></marker> + </desc> + </func> + + <func> + <name since="">rename(Pid, Old, New) -> ok | {error, Reason}</name> + <fsummary>Renames a file at the remote server.</fsummary> + <type> + <v>Pid = pid()</v> + <v>CurrFile = NewFile = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Renames <c>Old</c> to <c>New</c> at the remote server.</p> + + <marker id="rmdir"></marker> + </desc> + </func> + + <func> + <name since="">rmdir(Pid, Dir) -> ok | {error, Reason}</name> + <fsummary>Removes a remote directory.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Dir = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Removes directory <c>Dir</c> at the remote server.</p> + + <marker id="send"></marker> + <marker id="send2"></marker> + <marker id="send3"></marker> + </desc> + </func> + + <func> + <name since="">send(Pid, LocalFile) -></name> + <name since="">send(Pid, LocalFile, RemoteFile) -> ok | {error, Reason}</name> + <fsummary>Transfers a file to the remote server.</fsummary> + <type> + <v>Pid = pid()</v> + <v>LocalFile = RemoteFile = string()</v> + <v>Reason = restriction_reason() | common_reason() | shortage_reason()</v> + </type> + <desc> + <p>Transfers the file <c>LocalFile</c> to the remote server. If + <c>RemoteFile</c> is specified, the name of the remote file is set + to <c>RemoteFile</c>, otherwise to <c>LocalFile</c>.</p> + + <marker id="send_bin"></marker> + </desc> + </func> + + <func> + <name since="">send_bin(Pid, Bin, RemoteFile) -> ok | {error, Reason}</name> + <fsummary>Transfers a binary into a remote file.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Bin = binary()</v> + <v>RemoteFile = string()</v> + <v>Reason = restriction_reason() | common_reason() | shortage_reason()</v> + </type> + <desc> + <p>Transfers the binary <c>Bin</c> into the file <c>RemoteFile</c> + at the remote server.</p> + + <marker id="send_chunk"></marker> + </desc> + </func> + + <func> + <name since="">send_chunk(Pid, Bin) -> ok | {error, Reason}</name> + <fsummary>Writes a chunk to the remote file.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Bin = binary()</v> + <v>Reason = echunk | restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Transfers the chunk <c>Bin</c> to the remote server, which + writes it into the file specified in the call to + <c>send_chunk_start/2</c>.</p> + <p>For some errors, for example, file system full, it is + necessary to to call <c>send_chunk_end</c> to get the + proper reason.</p> + + <marker id="send_chunk_start"></marker> + </desc> + </func> + + <func> + <name since="">send_chunk_start(Pid, File) -> ok | {error, Reason}</name> + <fsummary>Starts transfer of file chunks.</fsummary> + <type> + <v>Pid = pid()</v> + <v>File = string()</v> + <v>Reason = restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Starts transfer of chunks into the file <c>File</c> at the + remote server.</p> + + <marker id="send_chunk_end"></marker> + </desc> + </func> + + <func> + <name since="">send_chunk_end(Pid) -> ok | {error, Reason}</name> + <fsummary>Stops transfer of chunks.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Reason = restriction_reason() | common_reason() | shortage_reason()</v> + </type> + <desc> + <p>Stops transfer of chunks to the remote server. The file at the + remote server, specified in the call to <c>send_chunk_start/2</c> + is closed by the server.</p> + + <marker id="type"></marker> + </desc> + </func> + + <func> + <name since="OTP 21.0">start_service(ServiceConfig) -> {ok, Pid} | {error, Reason}</name> + <fsummary>Dynamically starts an <c>FTP</c> + session after the <c>ftp</c> application has been started.</fsummary> + <type> + <v>ServiceConfig = [{Option, Value}]</v> + <v>Option = property()</v> + <v>Value = term()</v> + </type> + <desc> + <p>Dynamically starts an <c>FTP</c> session after the <c>ftp</c> + application has been started.</p> + <note> + <p>As long as the <c>ftp</c> application is operational, + the FTP sessions are supervised and can be soft code upgraded.</p> + </note> + </desc> + </func> + + <func> + <name since="OTP 21.0">stop_service(Reference) -> ok | {error, Reason} </name> + <fsummary>Stops an FTP session.</fsummary> + <type> + <v>Reference = pid() | term() - service-specified reference</v> + <v>Reason = term()</v> + </type> + <desc> + <p>Stops a started FTP session.</p> + </desc> + </func> + + <func> + <name since="">type(Pid, Type) -> ok | {error, Reason}</name> + <fsummary>Sets transfer type to <c>ascii</c>or <c>binary</c>.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Type = ascii | binary</v> + <v>Reason = etype | restriction_reason() | common_reason()</v> + </type> + <desc> + <p>Sets the file transfer type to <c>ascii</c> or <c>binary</c>. When + an FTP session is opened, the default transfer type of the + server is used, most often <c>ascii</c>, which is default + according to <url href="http://www.ietf.org/rfc/rfc959.txt">RFC 959</url>.</p> + <marker id="user3"></marker> + </desc> + </func> + + <func> + <name since="">user(Pid, User, Password) -> ok | {error, Reason}</name> + <fsummary>User login.</fsummary> + <type> + <v>Pid = pid()</v> + <v>User = Password = string()</v> + <v>Reason = euser | common_reason()</v> + </type> + <desc> + <p>Performs login of <c>User</c> with <c>Password</c>.</p> + + <marker id="user4"></marker> + </desc> + </func> + + <func> + <name since="">user(Pid, User, Password, Account) -> ok | {error, Reason}</name> + <fsummary>User login.</fsummary> + <type> + <v>Pid = pid()</v> + <v>User = Password = string()</v> + <v>Reason = euser | common_reason() </v> + </type> + <desc> + <p>Performs login of <c>User</c> with <c>Password</c> to the account + specified by <c>Account</c>.</p> + + <marker id="quote"></marker> + </desc> + </func> + + <func> + <name since="">quote(Pid, Command) -> [FTPLine]</name> + <fsummary>Sends an arbitrary FTP command.</fsummary> + <type> + <v>Pid = pid()</v> + <v>Command = string()</v> + <v>FTPLine = string(</v> + </type> + <desc><note><p>The telnet end of line characters, from the FTP + protocol definition, CRLF, for example, "\\r\\n" has been removed.</p></note> + <p>Sends an arbitrary FTP command and returns verbatim a list + of the lines sent back by the FTP server. This function is + intended to give application accesses to FTP commands + that are server-specific or that cannot be provided by + this FTP client.</p> + <note> + <p>FTP commands requiring a data connection cannot be + successfully issued with this function.</p> + </note> + </desc> + </func> + </funcs> + + <section> + <title>ERRORS</title> + <p>The possible error reasons and the corresponding diagnostic strings + returned by <c>formaterror/1</c> are as follows: + </p> + <taglist> + <tag><c>echunk</c></tag> + <item> + <p>Synchronization error during chunk sending according to one + of the following: + </p><list type="bulleted"> + <item>A call is made to <c>send_chunk/2</c> or <c>send_chunk_end/1</c> + before a call to <c>send_chunk_start/2</c>.</item> + <item>A call has been made to another transfer function during chunk + sending, that is, before a call to <c>send_chunk_end/1</c>.</item> + </list> + </item> + <tag><c>eclosed</c></tag> + <item> + <p>The session is closed.</p> + </item> + <tag><c>econn</c></tag> + <item> + <p>Connection to the remote server is prematurely closed.</p> + </item> + <tag><c>ehost</c></tag> + <item> + <p>Host is not found, FTP server is not found, or connection is rejected + by FTP server.</p> + </item> + <tag><c>elogin</c></tag> + <item> + <p>User is not logged in.</p> + </item> + <tag><c>enotbinary</c></tag> + <item> + <p>Term is not a binary.</p> + </item> + <tag><c>epath</c></tag> + <item> + <p>No such file or directory, or directory already exists, or + permission denied.</p> + </item> + <tag><c>etype</c></tag> + <item> + <p>No such type.</p> + </item> + <tag><c>euser</c></tag> + <item> + <p>Invalid username or password.</p> + </item> + <tag><c>etnospc</c></tag> + <item> + <p>Insufficient storage space in system [452].</p> + </item> + <tag><c>epnospc</c></tag> + <item> + <p>Exceeded storage allocation (for current directory or + dataset) [552].</p> + </item> + <tag><c>efnamena</c></tag> + <item> + <p>Filename not allowed [553].</p> + </item> + </taglist> + </section> + + <section> + <title>SEE ALSO</title> + <p><seealso marker="kernel:file">file(3)</seealso> + <seealso marker="stdlib:filename">filename(3)</seealso> + and J. Postel and J. Reynolds: File Transfer Protocol + (<url href="http://www.ietf.org/rfc/rfc959.txt">RFC 959</url>). + </p> + </section> + +</erlref> + + diff --git a/lib/ftp/doc/src/ftp_client.xml b/lib/ftp/doc/src/ftp_client.xml new file mode 100644 index 0000000000..047b055be7 --- /dev/null +++ b/lib/ftp/doc/src/ftp_client.xml @@ -0,0 +1,86 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2004</year><year>2018</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>FTP Client</title> + <prepared>Péter Dimitrov</prepared> + <responsible></responsible> + <docno></docno> + <approved></approved> + <checked></checked> + <date></date> + <rev></rev> + <file>ftp_client.xml</file> + </header> + + <section> + <title>Getting Started</title> + + <p>FTP clients are considered to be rather temporary. Thus, + they are only started and stopped during runtime and cannot + be started at application startup. + The FTP client API is designed to allow some functions to + return intermediate results. This implies that only the process + that started the FTP client can access it with + preserved sane semantics. + If the process that started the FTP session + dies, the FTP client process terminates.</p> + + <p>The client supports IPv6 as long as the underlying mechanisms + also do so.</p> + + <p>The following is a simple example of an FTP session, where + the user <c>guest</c> with password <c>password</c> logs on to + the remote host <c>erlang.org</c>:</p> + <code type="erl"><![CDATA[ + 1> ftp:start(). + ok + 2> {ok, Pid} = ftp:start_service([{host, "erlang.org"}]). + {ok,<0.22.0>} + 3> ftp:user(Pid, "guest", "password"). + ok + 4> ftp:pwd(Pid). + {ok, "/home/guest"} + 5> ftp:cd(Pid, "appl/examples"). + ok + 6> ftp:lpwd(Pid). + {ok, "/home/fred"}. + 7> ftp:lcd(Pid, "/home/eproj/examples"). + ok + 8> ftp:recv(Pid, "appl.erl"). + ok + 9> ftp:stop_service(Pid). + ok + 10> ftp:stop(). + ok + ]]></code> + <p> The file + <c>appl.erl</c> is transferred from the remote to the local + host. When the session is opened, the current directory at + the remote host is <c>/home/guest</c>, and <c>/home/fred</c> + at the local host. Before transferring the file, the current + local directory is changed to <c>/home/eproj/examples</c>, and + the remote directory is set to + <c>/home/guest/appl/examples</c>.</p> + </section> +</chapter> diff --git a/lib/ftp/doc/src/introduction.xml b/lib/ftp/doc/src/introduction.xml new file mode 100644 index 0000000000..cc3673a0fc --- /dev/null +++ b/lib/ftp/doc/src/introduction.xml @@ -0,0 +1,46 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>1997</year><year>2018</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + + </legalnotice> + + <title>Introduction</title> + <prepared>Péter Dimitrov</prepared> + <responsible></responsible> + <docno></docno> + <approved></approved> + <checked></checked> + <date>2018-02-26</date> + <rev>A</rev> + <file>introduction.xml</file> + </header> + + <section> + <title>Purpose</title> + <p>An <c>FTP</c> client.</p> + </section> + + <section> + <title>Prerequisites</title> + <p>It is assumed that the reader is familiar with the Erlang + programming language, concepts of OTP, and has a basic + understanding of the FTP protocol.</p> + </section> +</chapter> diff --git a/lib/ftp/doc/src/notes.xml b/lib/ftp/doc/src/notes.xml new file mode 100644 index 0000000000..61da079900 --- /dev/null +++ b/lib/ftp/doc/src/notes.xml @@ -0,0 +1,84 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2002</year><year>2018</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>FTP Release Notes</title> + <prepared></prepared> + <responsible></responsible> + <docno></docno> + <approved></approved> + <checked></checked> + <date>2018-02-26</date> + <rev>A</rev> + <file>notes.xml</file> + </header> + + <section><title>Ftp 1.0.2</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Fixed timing related bug that could make ftp functions + behave badly.</p> + <p> + Own Id: OTP-15659 Aux Id: ERIERL-316 </p> + </item> + </list> + </section> + +</section> + +<section><title>Ftp 1.0.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Improved documentation.</p> + <p> + Own Id: OTP-15190</p> + </item> + </list> + </section> + +</section> + +<section><title>FTP 1.0</title> + + <section><title>First released version</title> + <list> + <item> + <p> + Inets application was split into multiple smaller protocol specific applications. + The FTP application is a standalone FTP client with the same functionality as + FTP client in Inets.</p> + <p> + Own Id: OTP-14113</p> + </item> + </list> + </section> + +</section> + +</chapter> diff --git a/lib/ftp/doc/src/part.xml b/lib/ftp/doc/src/part.xml new file mode 100644 index 0000000000..ec05f5ac76 --- /dev/null +++ b/lib/ftp/doc/src/part.xml @@ -0,0 +1,37 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE part SYSTEM "part.dtd"> + +<part xmlns:xi="http://www.w3.org/2001/XInclude"> + <header> + <copyright> + <year>2004</year><year>2018</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>FTP User's Guide</title> + <prepared>Péter Dimitrov</prepared> + <docno></docno> + <date>2018-02-26</date> + <rev>A</rev> + <file>part.sgml</file> + </header> + <description> + <p>The <c>FTP</c> application provides an FTP client.</p> + </description> + <xi:include href="introduction.xml"/> + <xi:include href="ftp_client.xml"/> +</part> diff --git a/lib/ftp/doc/src/ref_man.xml b/lib/ftp/doc/src/ref_man.xml new file mode 100644 index 0000000000..925842610d --- /dev/null +++ b/lib/ftp/doc/src/ref_man.xml @@ -0,0 +1,36 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE application SYSTEM "application.dtd"> + +<application xmlns:xi="http://www.w3.org/2001/XInclude"> + <header> + <copyright> + <year>1997</year><year>2018</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>FTP Reference Manual</title> + <prepared>Péter Dimitrov</prepared> + <docno></docno> + <date>2018-03-09</date> + <rev>1.0</rev> + <file>ref_man.xml</file> + </header> + <description> + <p>An <c>FTP</c> client.</p> + </description> + <xi:include href="ftp.xml"/> +</application> diff --git a/lib/ftp/ebin/.gitignore b/lib/ftp/ebin/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/ftp/ebin/.gitignore diff --git a/lib/ftp/info b/lib/ftp/info new file mode 100644 index 0000000000..f6c62d19c2 --- /dev/null +++ b/lib/ftp/info @@ -0,0 +1,2 @@ +group: comm +short: FTP client diff --git a/lib/ftp/src/Makefile b/lib/ftp/src/Makefile new file mode 100644 index 0000000000..93e3c4a8e5 --- /dev/null +++ b/lib/ftp/src/Makefile @@ -0,0 +1,118 @@ +# +# %CopyrightBegin% +# +# Copyright Ericsson AB 1999-2018. All Rights Reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# %CopyrightEnd% +# + +# + +include $(ERL_TOP)/make/target.mk +include $(ERL_TOP)/make/$(TARGET)/otp.mk + +# ---------------------------------------------------- +# Application version +# ---------------------------------------------------- +include ../vsn.mk +VSN=$(FTP_VSN) + +# ---------------------------------------------------- +# Release directory specification +# ---------------------------------------------------- +RELSYSDIR = $(RELEASE_PATH)/lib/ftp-$(VSN) + +# ---------------------------------------------------- +# Common Macros +# ---------------------------------------------------- + +BEHAVIOUR_MODULES= + +MODULES= \ + ftp \ + ftp_app \ + ftp_progress \ + ftp_response \ + ftp_sup + + +INTERNAL_HRL_FILES = + +ERL_FILES= \ + $(MODULES:%=%.erl) \ + $(BEHAVIOUR_MODULES:%=%.erl) + + +TARGET_FILES= $(MODULES:%=$(EBIN)/%.$(EMULATOR)) + +BEHAVIOUR_TARGET_FILES= $(BEHAVIOUR_MODULES:%=$(EBIN)/%.$(EMULATOR)) + +APP_FILE= ftp.app +APPUP_FILE= ftp.appup + +APP_SRC= $(APP_FILE).src +APP_TARGET= $(EBIN)/$(APP_FILE) +APPUP_SRC= $(APPUP_FILE).src +APPUP_TARGET= $(EBIN)/$(APPUP_FILE) + +# ---------------------------------------------------- +# FLAGS +# ---------------------------------------------------- +EXTRA_ERLC_FLAGS = +warn_unused_vars +ERL_COMPILE_FLAGS += -I$(ERL_TOP)/lib/kernel/src \ + -pz $(EBIN) \ + -pz $(ERL_TOP)/lib/public_key/ebin \ + $(EXTRA_ERLC_FLAGS) -DVSN=\"$(VSN)\" + + +# ---------------------------------------------------- +# Targets +# ---------------------------------------------------- + +$(TARGET_FILES): $(BEHAVIOUR_TARGET_FILES) + +debug opt: $(TARGET_FILES) $(APP_TARGET) $(APPUP_TARGET) + +clean: + rm -f $(TARGET_FILES) $(APP_TARGET) $(APPUP_TARGET) $(BEHAVIOUR_TARGET_FILES) + rm -f errs core *~ + +$(APP_TARGET): $(APP_SRC) ../vsn.mk + $(vsn_verbose)sed -e 's;%VSN%;$(VSN);' $< > $@ + +$(APPUP_TARGET): $(APPUP_SRC) ../vsn.mk + $(vsn_verbose)sed -e 's;%VSN%;$(VSN);' $< > $@ + +docs: + + +# ---------------------------------------------------- +# Release Target +# ---------------------------------------------------- +include $(ERL_TOP)/make/otp_release_targets.mk + +release_spec: opt + $(INSTALL_DIR) "$(RELSYSDIR)/src" + $(INSTALL_DATA) $(ERL_FILES) $(INTERNAL_HRL_FILES) "$(RELSYSDIR)/src" + $(INSTALL_DIR) "$(RELSYSDIR)/ebin" + $(INSTALL_DATA) $(BEHAVIOUR_TARGET_FILES) $(TARGET_FILES) $(APP_TARGET) \ + $(APPUP_TARGET) "$(RELSYSDIR)/ebin" + +release_docs_spec: + +# ---------------------------------------------------- +# Dependencies +# ---------------------------------------------------- + diff --git a/lib/ftp/src/ftp.app.src b/lib/ftp/src/ftp.app.src new file mode 100644 index 0000000000..66ccace390 --- /dev/null +++ b/lib/ftp/src/ftp.app.src @@ -0,0 +1,19 @@ +{application, ftp, + [{description, "FTP client"}, + {vsn, "%VSN%"}, + {registered, []}, + {mod, { ftp_app, []}}, + {applications, + [kernel, + stdlib + ]}, + {env,[]}, + {modules, [ + ftp, + ftp_app, + ftp_progress, + ftp_response, + ftp_sup + ]}, + {runtime_dependencies, ["erts-7.0","stdlib-3.5","kernel-6.0"]} + ]}. diff --git a/lib/ftp/src/ftp.appup.src b/lib/ftp/src/ftp.appup.src new file mode 100644 index 0000000000..d79c7b60ff --- /dev/null +++ b/lib/ftp/src/ftp.appup.src @@ -0,0 +1,26 @@ +%% -*- erlang -*- +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 1999-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +{"%VSN%", + [ + {<<".*">>,[{restart_application, ftp}]} + ], + [ + {<<".*">>,[{restart_application, ftp}]} + ] +}. diff --git a/lib/ftp/src/ftp.erl b/lib/ftp/src/ftp.erl new file mode 100644 index 0000000000..18cd8c7524 --- /dev/null +++ b/lib/ftp/src/ftp.erl @@ -0,0 +1,2619 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2002-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% + +-module(ftp). + +-behaviour(gen_server). + +-export([start/0, + start_service/1, + stop/0, + stop_service/1, + services/0, + service_info/1 + ]). + +%% Added for backward compatibility +-export([start_standalone/1]). + +-export([start_link/1, start_link/2]). + +%% API - Client interface +-export([cd/2, close/1, delete/2, formaterror/1, + lcd/2, lpwd/1, ls/1, ls/2, + mkdir/2, nlist/1, nlist/2, + open/1, open/2, + pwd/1, quote/2, + recv/2, recv/3, recv_bin/2, + recv_chunk_start/2, recv_chunk/1, + rename/3, rmdir/2, + send/2, send/3, send_bin/3, + send_chunk_start/2, send_chunk/2, send_chunk_end/1, + type/2, user/3, user/4, account/2, + append/3, append/2, append_bin/3, + append_chunk/2, append_chunk_end/1, append_chunk_start/2, + info/1, latest_ctrl_response/1]). + +%% gen_server callbacks +-export([init/1, handle_call/3, handle_cast/2, + handle_info/2, terminate/2, code_change/3]). + +-include("ftp_internal.hrl"). + +%% Constants used in internal state definition +-define(CONNECTION_TIMEOUT, 60*1000). +-define(DATA_ACCEPT_TIMEOUT, infinity). +-define(DEFAULT_MODE, passive). +-define(PROGRESS_DEFAULT, ignore). +-define(FTP_EXT_DEFAULT, false). + +%% Internal Constants +-define(FTP_PORT, 21). +-define(FILE_BUFSIZE, 4096). + + +%%%========================================================================= +%%% Data Types +%%%========================================================================= + +%% Internal state +-record(state, { + csock = undefined, % socket() - Control connection socket + dsock = undefined, % socket() - Data connection socket + tls_options = undefined, % list() + verbose = false, % boolean() + ldir = undefined, % string() - Current local directory + type = ftp_server_default, % atom() - binary | ascii + chunk = false, % boolean() - Receiving data chunks + mode = ?DEFAULT_MODE, % passive | active + timeout = ?CONNECTION_TIMEOUT, % integer() + %% Data received so far on the data connection + data = <<>>, % binary() + %% Data received so far on the control connection + %% {BinStream, AccLines}. If a binary sequence + %% ends with ?CR then keep it in the binary to + %% be able to detect if the next received byte is ?LF + %% and hence the end of the response is reached! + ctrl_data = {<<>>, [], start}, % {binary(), [bytes()], LineStatus} + %% pid() - Client pid (note not the same as "From") + latest_ctrl_response = "", + owner = undefined, + client = undefined, % "From" to be used in gen_server:reply/2 + %% Function that activated a connection and maybe some + %% data needed further on. + caller = undefined, % term() + ipfamily, % inet | inet6 | inet6fb4 + sockopts_ctrl = [], + sockopts_data_passive = [], + sockopts_data_active = [], + progress = ignore, % ignore | pid() + dtimeout = ?DATA_ACCEPT_TIMEOUT, % non_neg_integer() | infinity + tls_upgrading_data_connection = false, + ftp_extension = ?FTP_EXT_DEFAULT + }). + +-record(recv_chunk_closing, { + dconn_closed = false, + pos_compl_received = false, + client_called_us = false + }). + + +-type shortage_reason() :: 'etnospc' | 'epnospc'. +-type restriction_reason() :: 'epath' | 'efnamena' | 'elogin' | 'enotbinary'. +-type common_reason() :: 'econn' | 'eclosed' | term(). +-type file_write_error_reason() :: term(). % See file:write for more info + +-define(DBG(F,A), 'n/a'). +%%-define(DBG(F,A), io:format(F,A)). +%%-define(DBG(F,A), ct:pal("~p:~p " ++ if is_list(F) -> F; is_atom(F) -> atom_to_list(F) end, [?MODULE,?LINE|A])). + + +%%%========================================================================= +%%% API +%%%========================================================================= + +start() -> + application:start(ftp). + +start_standalone(Options) -> + try + {ok, StartOptions} = start_options(Options), + {ok, OpenOptions} = open_options(Options), + {ok, SocketOptions} = socket_options(Options), + case start_link(StartOptions, []) of + {ok, Pid} -> + call(Pid, {open, ip_comm, OpenOptions, SocketOptions}, plain); + Error1 -> + Error1 + end + catch + throw:Error2 -> + Error2 + end. + +start_service(Options) -> + try + {ok, StartOptions} = start_options(Options), + {ok, OpenOptions} = open_options(Options), + {ok, SocketOptions} = socket_options(Options), + case ftp_sup:start_child([[[{client, self()} | StartOptions], []]]) of + {ok, Pid} -> + call(Pid, {open, ip_comm, OpenOptions, SocketOptions}, plain); + Error1 -> + Error1 + end + catch + throw:Error2 -> + Error2 + end. + +stop() -> + application:stop(ftp). + +stop_service(Pid) -> + close(Pid). + +services() -> + [{ftpc, Pid} || {_, Pid, _, _} <- + supervisor:which_children(ftp_sup)]. +service_info(Pid) -> + {ok, Info} = call(Pid, info, list), + {ok, [proplists:lookup(mode, Info), + proplists:lookup(local_port, Info), + proplists:lookup(peer, Info), + proplists:lookup(peer_port, Info)]}. + + +%%%========================================================================= +%%% API - CLIENT FUNCTIONS +%%%========================================================================= + +%%-------------------------------------------------------------------------- +%% open(HostOrOtpList, <Port>, <Flags>) -> {ok, Pid} | {error, ehost} +%% HostOrOtpList = string() | [{option_list, Options}] +%% Port = integer(), +%% Flags = [Flag], +%% Flag = verbose | debug | trace +%% +%% Description: Start an ftp client and connect to a host. +%%-------------------------------------------------------------------------- + +-spec open(Host :: string() | inet:ip_address()) -> + {'ok', Pid :: pid()} | {'error', Reason :: 'ehost' | term()}. + +%% <BACKWARD-COMPATIBILLITY> +open({option_list, Options}) when is_list(Options) -> + try + {ok, StartOptions} = start_options(Options), + {ok, OpenOptions} = open_options(Options), + {ok, SockOpts} = socket_options(Options), + case ftp_sup:start_child([[[{client, self()} | StartOptions], []]]) of + {ok, Pid} -> + call(Pid, {open, ip_comm, OpenOptions, SockOpts}, plain); + Error1 -> + Error1 + end + catch + throw:Error2 -> + Error2 + end; +%% </BACKWARD-COMPATIBILLITY> + +open(Host) -> + open(Host, []). + +-spec open(Host :: string() | inet:ip_address(), Opts :: list()) -> + {'ok', Pid :: pid()} | {'error', Reason :: 'ehost' | term()}. + +%% <BACKWARD-COMPATIBILLITY> +open(Host, Port) when is_integer(Port) -> + open(Host, [{port, Port}]); +%% </BACKWARD-COMPATIBILLITY> + +open(Host, Opts) when is_list(Opts) -> + try + {ok, StartOptions} = start_options(Opts), + {ok, OpenOptions} = open_options([{host, Host}|Opts]), + {ok, SocketOptions} = socket_options(Opts), + case start_link(StartOptions, []) of + {ok, Pid} -> + do_open(Pid, OpenOptions, SocketOptions, tls_options(Opts)); + Error1 -> + Error1 + end + catch + throw:Error2 -> + Error2 + end. + +do_open(Pid, OpenOptions, SocketOptions, TLSOpts) -> + case call(Pid, {open, ip_comm, OpenOptions, SocketOptions}, plain) of + {ok, Pid} -> + maybe_tls_upgrade(Pid, TLSOpts); + Error -> + Error + end. +%%-------------------------------------------------------------------------- +%% user(Pid, User, Pass, <Acc>) -> ok | {error, euser} | {error, econn} +%% | {error, eacct} +%% Pid = pid(), +%% User = Pass = Acc = string() +%% +%% Description: Login with or without a supplied account name. +%%-------------------------------------------------------------------------- +-spec user(Pid :: pid(), + User :: string(), + Pass :: string()) -> + 'ok' | {'error', Reason :: 'euser' | common_reason()}. + +user(Pid, User, Pass) -> + case {is_name_sane(User), is_name_sane(Pass)} of + {true, true} -> + call(Pid, {user, User, Pass}, atom); + _ -> + {error, euser} + end. + +-spec user(Pid :: pid(), + User :: string(), + Pass :: string(), + Acc :: string()) -> + 'ok' | {'error', Reason :: 'euser' | common_reason()}. + +user(Pid, User, Pass, Acc) -> + case {is_name_sane(User), is_name_sane(Pass), is_name_sane(Acc)} of + {true, true, true} -> + call(Pid, {user, User, Pass, Acc}, atom); + _ -> + {error, euser} + end. + + +%%-------------------------------------------------------------------------- +%% account(Pid, Acc) -> ok | {error, eacct} +%% Pid = pid() +%% Acc= string() +%% +%% Description: Set a user Account. +%%-------------------------------------------------------------------------- + +-spec account(Pid :: pid(), Acc :: string()) -> + 'ok' | {'error', Reason :: 'eacct' | common_reason()}. + +account(Pid, Acc) -> + case is_name_sane(Acc) of + true -> + call(Pid, {account, Acc}, atom); + _ -> + {error, eacct} + end. + + +%%-------------------------------------------------------------------------- +%% pwd(Pid) -> {ok, Dir} | {error, elogin} | {error, econn} +%% Pid = pid() +%% Dir = string() +%% +%% Description: Get the current working directory at remote server. +%%-------------------------------------------------------------------------- + +-spec pwd(Pid :: pid()) -> + {'ok', Dir :: string()} | + {'error', Reason :: restriction_reason() | common_reason()}. + +pwd(Pid) -> + call(Pid, pwd, ctrl). + + +%%-------------------------------------------------------------------------- +%% lpwd(Pid) -> {ok, Dir} +%% Pid = pid() +%% Dir = string() +%% +%% Description: Get the current working directory at local server. +%%-------------------------------------------------------------------------- + +-spec lpwd(Pid :: pid()) -> + {'ok', Dir :: string()}. + +lpwd(Pid) -> + call(Pid, lpwd, string). + + +%%-------------------------------------------------------------------------- +%% cd(Pid, Dir) -> ok | {error, epath} | {error, elogin} | {error, econn} +%% Pid = pid() +%% Dir = string() +%% +%% Description: Change current working directory at remote server. +%%-------------------------------------------------------------------------- + +-spec cd(Pid :: pid(), Dir :: string()) -> + 'ok' | {'error', Reason :: restriction_reason() | common_reason()}. + +cd(Pid, Dir) -> + case is_name_sane(Dir) of + true -> + call(Pid, {cd, Dir}, atom); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% lcd(Pid, Dir) -> ok | {error, epath} +%% Pid = pid() +%% Dir = string() +%% +%% Description: Change current working directory for the local client. +%%-------------------------------------------------------------------------- + +-spec lcd(Pid :: pid(), Dir :: string()) -> + 'ok' | {'error', Reason :: restriction_reason()}. + +lcd(Pid, Dir) -> + call(Pid, {lcd, Dir}, string). + + +%%-------------------------------------------------------------------------- +%% ls(Pid) -> Result +%% ls(Pid, <Dir>) -> Result +%% +%% Pid = pid() +%% Dir = string() +%% Result = {ok, Listing} | {error, Reason} +%% Listing = string() +%% Reason = epath | elogin | econn +%% +%% Description: Returns a list of files in long format. +%%-------------------------------------------------------------------------- + +-spec ls(Pid :: pid()) -> + {'ok', Listing :: string()} | + {'error', Reason :: restriction_reason() | common_reason()}. + +ls(Pid) -> + ls(Pid, ""). + +-spec ls(Pid :: pid(), Dir :: string()) -> + {'ok', Listing :: string()} | + {'error', Reason :: restriction_reason() | common_reason()}. + +ls(Pid, Dir) -> + case is_name_sane(Dir) of + true -> + call(Pid, {dir, long, Dir}, string); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% nlist(Pid) -> Result +%% nlist(Pid, Pathname) -> Result +%% +%% Pid = pid() +%% Pathname = string() +%% Result = {ok, Listing} | {error, Reason} +%% Listing = string() +%% Reason = epath | elogin | econn +%% +%% Description: Returns a list of files in short format +%%-------------------------------------------------------------------------- + +-spec nlist(Pid :: pid()) -> + {'ok', Listing :: string()} | + {'error', Reason :: restriction_reason() | common_reason()}. + +nlist(Pid) -> + nlist(Pid, ""). + +-spec nlist(Pid :: pid(), Pathname :: string()) -> + {'ok', Listing :: string()} | + {'error', Reason :: restriction_reason() | common_reason()}. + +nlist(Pid, Dir) -> + case is_name_sane(Dir) of + true -> + call(Pid, {dir, short, Dir}, string); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% rename(Pid, Old, New) -> ok | {error, epath} | {error, elogin} +%% | {error, econn} +%% Pid = pid() +%% CurrFile = NewFile = string() +%% +%% Description: Rename a file at remote server. +%%-------------------------------------------------------------------------- + +-spec rename(Pid :: pid(), Old :: string(), New :: string()) -> + 'ok' | {'error', Reason :: restriction_reason() | common_reason()}. + +rename(Pid, Old, New) -> + case {is_name_sane(Old), is_name_sane(New)} of + {true, true} -> + call(Pid, {rename, Old, New}, string); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% delete(Pid, File) -> ok | {error, epath} | {error, elogin} | +%% {error, econn} +%% Pid = pid() +%% File = string() +%% +%% Description: Remove file at remote server. +%%-------------------------------------------------------------------------- + +-spec delete(Pid :: pid(), File :: string()) -> + 'ok' | {'error', Reason :: restriction_reason() | common_reason()}. + +delete(Pid, File) -> + case is_name_sane(File) of + true -> + call(Pid, {delete, File}, string); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% mkdir(Pid, Dir) -> ok | {error, epath} | {error, elogin} | {error, econn} +%% Pid = pid(), +%% Dir = string() +%% +%% Description: Make directory at remote server. +%%-------------------------------------------------------------------------- + +-spec mkdir(Pid :: pid(), Dir :: string()) -> + 'ok' | {'error', Reason :: restriction_reason() | common_reason()}. + +mkdir(Pid, Dir) -> + case is_name_sane(Dir) of + true -> + call(Pid, {mkdir, Dir}, atom); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% rmdir(Pid, Dir) -> ok | {error, epath} | {error, elogin} | {error, econn} +%% Pid = pid(), +%% Dir = string() +%% +%% Description: Remove directory at remote server. +%%-------------------------------------------------------------------------- + +-spec rmdir(Pid :: pid(), Dir :: string()) -> + 'ok' | {'error', Reason :: restriction_reason() | common_reason()}. + +rmdir(Pid, Dir) -> + case is_name_sane(Dir) of + true -> + call(Pid, {rmdir, Dir}, atom); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% type(Pid, Type) -> ok | {error, etype} | {error, elogin} | {error, econn} +%% Pid = pid() +%% Type = ascii | binary +%% +%% Description: Set transfer type. +%%-------------------------------------------------------------------------- + +-spec type(Pid :: pid(), Type :: ascii | binary) -> + 'ok' | + {'error', Reason :: 'etype' | restriction_reason() | common_reason()}. + +type(Pid, Type) -> + call(Pid, {type, Type}, atom). + + +%%-------------------------------------------------------------------------- +%% recv(Pid, RemoteFileName [, LocalFileName]) -> ok | {error, epath} | +%% {error, elogin} | {error, econn} +%% Pid = pid() +%% RemoteFileName = LocalFileName = string() +%% +%% Description: Transfer file from remote server. +%%-------------------------------------------------------------------------- + +-spec recv(Pid :: pid(), RemoteFileName :: string()) -> + 'ok' | {'error', Reason :: restriction_reason() | + common_reason() | + file_write_error_reason()}. + +recv(Pid, RemotFileName) -> + recv(Pid, RemotFileName, RemotFileName). + +-spec recv(Pid :: pid(), + RemoteFileName :: string(), + LocalFileName :: string()) -> + 'ok' | {'error', Reason :: term()}. + +recv(Pid, RemotFileName, LocalFileName) -> + case is_name_sane(RemotFileName) of + true -> + call(Pid, {recv, RemotFileName, LocalFileName}, atom); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% recv_bin(Pid, RemoteFile) -> {ok, Bin} | {error, epath} | {error, elogin} +%% | {error, econn} +%% Pid = pid() +%% RemoteFile = string() +%% Bin = binary() +%% +%% Description: Transfer file from remote server into binary. +%%-------------------------------------------------------------------------- + +-spec recv_bin(Pid :: pid(), + RemoteFile :: string()) -> + {'ok', Bin :: binary()} | + {'error', Reason :: restriction_reason() | common_reason()}. + +recv_bin(Pid, RemoteFile) -> + case is_name_sane(RemoteFile) of + true -> + call(Pid, {recv_bin, RemoteFile}, bin); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% recv_chunk_start(Pid, RemoteFile) -> ok | {error, elogin} | {error, epath} +%% | {error, econn} +%% Pid = pid() +%% RemoteFile = string() +%% +%% Description: Start receive of chunks of remote file. +%%-------------------------------------------------------------------------- + +-spec recv_chunk_start(Pid :: pid(), + RemoteFile :: string()) -> + 'ok' | {'error', Reason :: restriction_reason() | common_reason()}. + +recv_chunk_start(Pid, RemoteFile) -> + case is_name_sane(RemoteFile) of + true -> + call(Pid, {recv_chunk_start, RemoteFile}, atom); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% recv_chunk(Pid, RemoteFile) -> ok | {ok, Bin} | {error, Reason} +%% Pid = pid() +%% RemoteFile = string() +%% +%% Description: Transfer file from remote server into binary in chunks +%%-------------------------------------------------------------------------- + +-spec recv_chunk(Pid :: pid()) -> + 'ok' | + {'ok', Bin :: binary()} | + {'error', Reason :: restriction_reason() | common_reason()}. + +recv_chunk(Pid) -> + call(Pid, recv_chunk, atom). + + +%%-------------------------------------------------------------------------- +%% send(Pid, LocalFileName [, RemotFileName]) -> ok | {error, epath} +%% | {error, elogin} +%% | {error, econn} +%% Pid = pid() +%% LocalFileName = RemotFileName = string() +%% +%% Description: Transfer file to remote server. +%%-------------------------------------------------------------------------- + +-spec send(Pid :: pid(), LocalFileName :: string()) -> + 'ok' | + {'error', Reason :: restriction_reason() | + common_reason() | + shortage_reason()}. + +send(Pid, LocalFileName) -> + send(Pid, LocalFileName, LocalFileName). + +-spec send(Pid :: pid(), + LocalFileName :: string(), + RemoteFileName :: string()) -> + 'ok' | + {'error', Reason :: restriction_reason() | + common_reason() | + shortage_reason()}. + +send(Pid, LocalFileName, RemotFileName) -> + case is_name_sane(RemotFileName) of + true -> + call(Pid, {send, LocalFileName, RemotFileName}, atom); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% send_bin(Pid, Bin, RemoteFile) -> ok | {error, epath} | {error, elogin} +%% | {error, enotbinary} | {error, econn} +%% Pid = pid() +%% Bin = binary() +%% RemoteFile = string() +%% +%% Description: Transfer a binary to a remote file. +%%-------------------------------------------------------------------------- + +-spec send_bin(Pid :: pid(), Bin :: binary(), RemoteFile :: string()) -> + 'ok' | + {'error', Reason :: restriction_reason() | + common_reason() | + shortage_reason()}. + +send_bin(Pid, Bin, RemoteFile) when is_binary(Bin) -> + case is_name_sane(RemoteFile) of + true -> + call(Pid, {send_bin, Bin, RemoteFile}, atom); + _ -> + {error, efnamena} + end; +send_bin(_Pid, _Bin, _RemoteFile) -> + {error, enotbinary}. + + +%%-------------------------------------------------------------------------- +%% send_chunk_start(Pid, RemoteFile) -> ok | {error, elogin} | {error, epath} +%% | {error, econn} +%% Pid = pid() +%% RemoteFile = string() +%% +%% Description: Start transfer of chunks to remote file. +%%-------------------------------------------------------------------------- + +-spec send_chunk_start(Pid :: pid(), RemoteFile :: string()) -> + 'ok' | {'error', Reason :: restriction_reason() | common_reason()}. + +send_chunk_start(Pid, RemoteFile) -> + case is_name_sane(RemoteFile) of + true -> + call(Pid, {send_chunk_start, RemoteFile}, atom); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% append_chunk_start(Pid, RemoteFile) -> ok | {error, elogin} | +%% {error, epath} | {error, econn} +%% Pid = pid() +%% RemoteFile = string() +%% +%% Description: Start append chunks of data to remote file. +%%-------------------------------------------------------------------------- + +-spec append_chunk_start(Pid :: pid(), RemoteFile :: string()) -> + 'ok' | {'error', Reason :: term()}. + +append_chunk_start(Pid, RemoteFile) -> + case is_name_sane(RemoteFile) of + true -> + call(Pid, {append_chunk_start, RemoteFile}, atom); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% send_chunk(Pid, Bin) -> ok | {error, elogin} | {error, enotbinary} +%% | {error, echunk} | {error, econn} +%% Pid = pid() +%% Bin = binary(). +%% +%% Purpose: Send chunk to remote file. +%%-------------------------------------------------------------------------- + +-spec send_chunk(Pid :: pid(), Bin :: binary()) -> + 'ok' | + {'error', Reason :: 'echunk' | + restriction_reason() | + common_reason()}. + +send_chunk(Pid, Bin) when is_binary(Bin) -> + call(Pid, {transfer_chunk, Bin}, atom); +send_chunk(_Pid, _Bin) -> + {error, enotbinary}. + + +%%-------------------------------------------------------------------------- +%% append_chunk(Pid, Bin) -> ok | {error, elogin} | {error, enotbinary} +%% | {error, echunk} | {error, econn} +%% Pid = pid() +%% Bin = binary() +%% +%% Description: Append chunk to remote file. +%%-------------------------------------------------------------------------- + +-spec append_chunk(Pid :: pid(), Bin :: binary()) -> + 'ok' | + {'error', Reason :: 'echunk' | + restriction_reason() | + common_reason()}. + +append_chunk(Pid, Bin) when is_binary(Bin) -> + call(Pid, {transfer_chunk, Bin}, atom); +append_chunk(_Pid, _Bin) -> + {error, enotbinary}. + + +%%-------------------------------------------------------------------------- +%% send_chunk_end(Pid) -> ok | {error, elogin} | {error, echunk} +%% | {error, econn} +%% Pid = pid() +%% +%% Description: End sending of chunks to remote file. +%%-------------------------------------------------------------------------- + +-spec send_chunk_end(Pid :: pid()) -> + 'ok' | + {'error', Reason :: restriction_reason() | + common_reason() | + shortage_reason()}. + +send_chunk_end(Pid) -> + call(Pid, chunk_end, atom). + + +%%-------------------------------------------------------------------------- +%% append_chunk_end(Pid) -> ok | {error, elogin} | {error, echunk} +%% | {error, econn} +%% Pid = pid() +%% +%% Description: End appending of chunks to remote file. +%%-------------------------------------------------------------------------- + +-spec append_chunk_end(Pid :: pid()) -> + 'ok' | + {'error', Reason :: restriction_reason() | + common_reason() | + shortage_reason()}. + +append_chunk_end(Pid) -> + call(Pid, chunk_end, atom). + + +%%-------------------------------------------------------------------------- +%% append(Pid, LocalFileName [, RemotFileName]) -> ok | {error, epath} +%% | {error, elogin} +%% | {error, econn} +%% Pid = pid() +%% LocalFileName = RemotFileName = string() +%% +%% Description: Append the local file to the remote file +%%-------------------------------------------------------------------------- + +-spec append(Pid :: pid(), LocalFileName :: string()) -> + 'ok' | + {'error', Reason :: 'epath' | + 'elogin' | + 'etnospc' | + 'epnospc' | + 'efnamena' | common_reason()}. + +append(Pid, LocalFileName) -> + append(Pid, LocalFileName, LocalFileName). + +-spec append(Pid :: pid(), + LocalFileName :: string(), + RemoteFileName :: string()) -> + 'ok' | {'error', Reason :: term()}. + +append(Pid, LocalFileName, RemotFileName) -> + case is_name_sane(RemotFileName) of + true -> + call(Pid, {append, LocalFileName, RemotFileName}, atom); + _ -> + {error, efnamena} + end. + + +%%-------------------------------------------------------------------------- +%% append_bin(Pid, Bin, RemoteFile) -> ok | {error, epath} | {error, elogin} +%% | {error, enotbinary} | {error, econn} +%% Pid = pid() +%% Bin = binary() +%% RemoteFile = string() +%% +%% Purpose: Append a binary to a remote file. +%%-------------------------------------------------------------------------- + +-spec append_bin(Pid :: pid(), + Bin :: binary(), + RemoteFile :: string()) -> + 'ok' | + {'error', Reason :: restriction_reason() | + common_reason() | + shortage_reason()}. + +append_bin(Pid, Bin, RemoteFile) when is_binary(Bin) -> + case is_name_sane(RemoteFile) of + true -> + call(Pid, {append_bin, Bin, RemoteFile}, atom); + _ -> + {error, efnamena} + end; +append_bin(_Pid, _Bin, _RemoteFile) -> + {error, enotbinary}. + + +%%-------------------------------------------------------------------------- +%% quote(Pid, Cmd) -> list() +%% Pid = pid() +%% Cmd = string() +%% +%% Description: Send arbitrary ftp command. +%%-------------------------------------------------------------------------- + +-spec quote(Pid :: pid(), Cmd :: string()) -> list(). + +quote(Pid, Cmd) when is_list(Cmd) -> + call(Pid, {quote, Cmd}, atom). + + +%%-------------------------------------------------------------------------- +%% close(Pid) -> ok +%% Pid = pid() +%% +%% Description: End the ftp session. +%%-------------------------------------------------------------------------- + +-spec close(Pid :: pid()) -> 'ok'. + +close(Pid) -> + cast(Pid, close), + ok. + + +%%-------------------------------------------------------------------------- +%% formaterror(Tag) -> string() +%% Tag = atom() | {error, atom()} +%% +%% Description: Return diagnostics. +%%-------------------------------------------------------------------------- + +-spec formaterror(Tag :: term()) -> string(). + +formaterror(Tag) -> + ftp_response:error_string(Tag). + + +info(Pid) -> + call(Pid, info, list). + + +%%-------------------------------------------------------------------------- +%% latest_ctrl_response(Pid) -> string() +%% Pid = pid() +%% +%% Description: The latest received response from the server +%%-------------------------------------------------------------------------- + +-spec latest_ctrl_response(Pid :: pid()) -> string(). + +latest_ctrl_response(Pid) -> + call(Pid, latest_ctrl_response, string). + + +%%%======================================================================== +%%% gen_server callback functions +%%%======================================================================== + +%%------------------------------------------------------------------------- +%% init(Args) -> {ok, State} | {ok, State, Timeout} | {stop, Reason} +%% Description: Initiates the erlang process that manages a ftp connection. +%%------------------------------------------------------------------------- +init(Options) -> + process_flag(trap_exit, true), + + %% Keep track of the client + {value, {client, Client}} = lists:keysearch(client, 1, Options), + erlang:monitor(process, Client), + + %% Make sure inet is started + _ = inet_db:start(), + + %% Where are we + {ok, Dir} = file:get_cwd(), + + %% Maybe activate dbg + case key_search(debug, Options, disable) of + trace -> + dbg:tracer(), + dbg:p(all, [call]), + {ok, _} = dbg:tpl(ftp, [{'_', [], [{return_trace}]}]), + {ok, _} = dbg:tpl(ftp_response, [{'_', [], [{return_trace}]}]), + {ok, _} = dbg:tpl(ftp_progress, [{'_', [], [{return_trace}]}]), + ok; + debug -> + dbg:tracer(), + dbg:p(all, [call]), + {ok, _} = dbg:tp(ftp, [{'_', [], [{return_trace}]}]), + {ok, _} = dbg:tp(ftp_response, [{'_', [], [{return_trace}]}]), + {ok, _} = dbg:tp(ftp_progress, [{'_', [], [{return_trace}]}]), + ok; + _ -> + %% Keep silent + ok + end, + + %% Verbose? + Verbose = key_search(verbose, Options, false), + + %% IpFamily? + IpFamily = key_search(ipfamily, Options, inet), + + State = #state{owner = Client, + verbose = Verbose, + ipfamily = IpFamily, + ldir = Dir}, + + %% Set process prio + Priority = key_search(priority, Options, low), + process_flag(priority, Priority), + + %% And we are done + {ok, State}. + + +%%-------------------------------------------------------------------------- +%% handle_call(Request, From, State) -> {reply, Reply, State} | +%% {reply, Reply, State, Timeout} | +%% {noreply, State} | +%% {noreply, State, Timeout} | +%% {stop, Reason, Reply, State} | +%% Description: Handle incoming requests. +%%------------------------------------------------------------------------- + +%% Anyone can ask this question +handle_call({_, info}, _, #state{verbose = Verbose, + mode = Mode, + timeout = Timeout, + ipfamily = IpFamily, + csock = Socket, + progress = Progress} = State) -> + {ok, {_, LocalPort}} = sockname(Socket), + {ok, {Address, Port}} = peername(Socket), + Options = [{verbose, Verbose}, + {ipfamily, IpFamily}, + {mode, Mode}, + {peer, Address}, + {peer_port, Port}, + {local_port, LocalPort}, + {timeout, Timeout}, + {progress, Progress}], + {reply, {ok, Options}, State}; + +handle_call({_,latest_ctrl_response}, _, #state{latest_ctrl_response=Resp} = State) -> + {reply, {ok,Resp}, State}; + +%% But everything else must come from the owner +handle_call({Pid, _}, _, #state{owner = Owner} = State) when Owner =/= Pid -> + {reply, {error, not_connection_owner}, State}; + +handle_call({_, {open, ip_comm, Opts, {CtrlOpts, DataPassOpts, DataActOpts}}}, From, State) -> + case key_search(host, Opts, undefined) of + undefined -> + {stop, normal, {error, ehost}, State}; + Host -> + Mode = key_search(mode, Opts, ?DEFAULT_MODE), + Port = key_search(port, Opts, ?FTP_PORT), + Timeout = key_search(timeout, Opts, ?CONNECTION_TIMEOUT), + DTimeout = key_search(dtimeout, Opts, ?DATA_ACCEPT_TIMEOUT), + Progress = key_search(progress, Opts, ignore), + IpFamily = key_search(ipfamily, Opts, inet), + FtpExt = key_search(ftp_extension, Opts, ?FTP_EXT_DEFAULT), + + State2 = State#state{client = From, + mode = Mode, + progress = progress(Progress), + ipfamily = IpFamily, + sockopts_ctrl = CtrlOpts, + sockopts_data_passive = DataPassOpts, + sockopts_data_active = DataActOpts, + dtimeout = DTimeout, + ftp_extension = FtpExt}, + + case setup_ctrl_connection(Host, Port, Timeout, State2) of + {ok, State3, WaitTimeout} -> + {noreply, State3, WaitTimeout}; + {error, _Reason} -> + gen_server:reply(From, {error, ehost}), + {stop, normal, State2#state{client = undefined}} + end + end; + +handle_call({_, {open, tls_upgrade, TLSOptions}}, From, State0) -> + _ = send_ctrl_message(State0, mk_cmd("AUTH TLS", [])), + State = activate_ctrl_connection(State0), + {noreply, State#state{client = From, caller = open, tls_options = TLSOptions}}; + +handle_call({_, {user, User, Password}}, From, + #state{csock = CSock} = State) when (CSock =/= undefined) -> + handle_user(User, Password, "", State#state{client = From}); + +handle_call({_, {user, User, Password, Acc}}, From, + #state{csock = CSock} = State) when (CSock =/= undefined) -> + handle_user(User, Password, Acc, State#state{client = From}); + +handle_call({_, {account, Acc}}, From, State)-> + handle_user_account(Acc, State#state{client = From}); + +handle_call({_, pwd}, From, #state{chunk = false} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("PWD", [])), + State = activate_ctrl_connection(State0), + {noreply, State#state{client = From, caller = pwd}}; + +handle_call({_, lpwd}, From, #state{ldir = LDir} = State) -> + {reply, {ok, LDir}, State#state{client = From}}; + +handle_call({_, {cd, Dir}}, From, #state{chunk = false} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("CWD ~s", [Dir])), + State = activate_ctrl_connection(State0), + {noreply, State#state{client = From, caller = cd}}; + +handle_call({_,{lcd, Dir}}, _From, #state{ldir = LDir0} = State) -> + LDir = filename:absname(Dir, LDir0), + case file:read_file_info(LDir) of %% FIX better check that LDir is a dir. + {ok, _ } -> + {reply, ok, State#state{ldir = LDir}}; + _ -> + {reply, {error, epath}, State} + end; + +handle_call({_, {dir, Len, Dir}}, {_Pid, _} = From, + #state{chunk = false} = State) -> + setup_data_connection(State#state{caller = {dir, Dir, Len}, + client = From}); +handle_call({_, {rename, CurrFile, NewFile}}, From, + #state{chunk = false} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("RNFR ~s", [CurrFile])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {rename, NewFile}, client = From}}; + +handle_call({_, {delete, File}}, {_Pid, _} = From, + #state{chunk = false} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("DELE ~s", [File])), + State = activate_ctrl_connection(State0), + {noreply, State#state{client = From}}; + +handle_call({_, {mkdir, Dir}}, From, #state{chunk = false} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("MKD ~s", [Dir])), + State = activate_ctrl_connection(State0), + {noreply, State#state{client = From}}; + +handle_call({_,{rmdir, Dir}}, From, #state{chunk = false} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("RMD ~s", [Dir])), + State = activate_ctrl_connection(State0), + {noreply, State#state{client = From}}; + +handle_call({_,{type, Type}}, From, #state{chunk = false} = State0) -> + case Type of + ascii -> + _ = send_ctrl_message(State0, mk_cmd("TYPE A", [])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = type, type = ascii, + client = From}}; + binary -> + _ = send_ctrl_message(State0, mk_cmd("TYPE I", [])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = type, type = binary, + client = From}}; + _ -> + {reply, {error, etype}, State0} + end; + +handle_call({_,{recv, RemoteFile, LocalFile}}, From, + #state{chunk = false, ldir = LocalDir} = State) -> + progress_report({remote_file, RemoteFile}, State), + NewLocalFile = filename:absname(LocalFile, LocalDir), + + case file_open(NewLocalFile, write) of + {ok, Fd} -> + setup_data_connection(State#state{client = From, + caller = + {recv_file, + RemoteFile, Fd}}); + {error, _What} -> + {reply, {error, epath}, State} + end; + +handle_call({_, {recv_bin, RemoteFile}}, From, #state{chunk = false} = + State) -> + setup_data_connection(State#state{caller = {recv_bin, RemoteFile}, + client = From}); + +handle_call({_,{recv_chunk_start, RemoteFile}}, From, #state{chunk = false} + = State) -> + setup_data_connection(State#state{caller = {start_chunk_transfer, + "RETR", RemoteFile}, + client = From}); + +handle_call({_, recv_chunk}, _, #state{chunk = false} = State) -> + {reply, {error, "ftp:recv_chunk_start/2 not called"}, State}; + +handle_call({_, recv_chunk}, _From, #state{chunk = true, + caller = #recv_chunk_closing{dconn_closed = true, + pos_compl_received = true + } + } = State0) -> + %% The ftp:recv_chunk call was the last event we waited for, finnish and clean up + ?DBG("recv_chunk_closing ftp:recv_chunk, last event",[]), + State = activate_ctrl_connection(State0), + {reply, ok, State#state{caller = undefined, + chunk = false, + client = undefined}}; + +handle_call({_, recv_chunk}, From, #state{chunk = true, + caller = #recv_chunk_closing{} = R + } = State) -> + %% Waiting for more, don't care what + ?DBG("recv_chunk_closing ftp:recv_chunk, get more",[]), + {noreply, State#state{client = From, caller = R#recv_chunk_closing{client_called_us=true}}}; + +handle_call({_, recv_chunk}, From, #state{chunk = true} = State0) -> + State = activate_data_connection(State0), + {noreply, State#state{client = From, caller = recv_chunk}}; + +handle_call({_, {send, LocalFile, RemoteFile}}, From, + #state{chunk = false, ldir = LocalDir} = State) -> + progress_report({local_file, filename:absname(LocalFile, LocalDir)}, + State), + setup_data_connection(State#state{caller = {transfer_file, + {"STOR", + LocalFile, RemoteFile}}, + client = From}); +handle_call({_, {append, LocalFile, RemoteFile}}, From, + #state{chunk = false} = State) -> + setup_data_connection(State#state{caller = {transfer_file, + {"APPE", + LocalFile, RemoteFile}}, + client = From}); +handle_call({_, {send_bin, Bin, RemoteFile}}, From, + #state{chunk = false} = State) -> + setup_data_connection(State#state{caller = {transfer_data, + {"STOR", Bin, RemoteFile}}, + client = From}); +handle_call({_,{append_bin, Bin, RemoteFile}}, From, + #state{chunk = false} = State) -> + setup_data_connection(State#state{caller = {transfer_data, + {"APPE", Bin, RemoteFile}}, + client = From}); +handle_call({_, {send_chunk_start, RemoteFile}}, From, #state{chunk = false} + = State) -> + setup_data_connection(State#state{caller = {start_chunk_transfer, + "STOR", RemoteFile}, + client = From}); +handle_call({_, {append_chunk_start, RemoteFile}}, From, #state{chunk = false} + = State) -> + setup_data_connection(State#state{caller = {start_chunk_transfer, + "APPE", RemoteFile}, + client = From}); +handle_call({_, {transfer_chunk, Bin}}, _, #state{chunk = true} = State) -> + send_data_message(State, Bin), + {reply, ok, State}; + +handle_call({_, {transfer_chunk, _}}, _, #state{chunk = false} = State) -> + {reply, {error, echunk}, State}; + +handle_call({_, chunk_end}, From, #state{chunk = true} = State0) -> + close_data_connection(State0), + State = activate_ctrl_connection(State0), + {noreply, State#state{client = From, dsock = undefined, + caller = end_chunk_transfer, chunk = false}}; + +handle_call({_, chunk_end}, _, #state{chunk = false} = State) -> + {reply, {error, echunk}, State}; + +handle_call({_, {quote, Cmd}}, From, #state{chunk = false} = State0) -> + _ = send_ctrl_message(State0, mk_cmd(Cmd, [])), + State = activate_ctrl_connection(State0), + {noreply, State#state{client = From, caller = quote}}; + +handle_call({_, _Req}, _From, #state{csock = CSock} = State) + when (CSock =:= undefined) -> + {reply, {error, not_connected}, State}; + +handle_call(_, _, #state{chunk = true} = State) -> + {reply, {error, echunk}, State}; + +%% Catch all - This can only happen if the application programmer writes +%% really bad code that violates the API. +handle_call(Request, _Timeout, State) -> + {stop, {'API_violation_connection_closed', Request}, + {error, {connection_terminated, 'API_violation'}}, State}. + +%%-------------------------------------------------------------------------- +%% handle_cast(Request, State) -> {noreply, State} | +%% {noreply, State, Timeout} | +%% {stop, Reason, State} +%% Description: Handles cast messages. +%%------------------------------------------------------------------------- +handle_cast({Pid, close}, #state{owner = Pid} = State) -> + _ = send_ctrl_message(State, mk_cmd("QUIT", [])), + close_ctrl_connection(State), + close_data_connection(State), + {stop, normal, State#state{csock = undefined, dsock = undefined}}; + +handle_cast({Pid, close}, State) -> + Report = io_lib:format("A none owner process ~p tried to close an " + "ftp connection: ~n", [Pid]), + error_logger:info_report(Report), + {noreply, State}; + +%% Catch all - This can oly happen if the application programmer writes +%% really bad code that violates the API. +handle_cast(Msg, State) -> + {stop, {'API_violation_connection_closed', Msg}, State}. + +%%-------------------------------------------------------------------------- +%% handle_info(Msg, State) -> {noreply, State} | {noreply, State, Timeout} | +%% {stop, Reason, State} +%% Description: Handles tcp messages from the ftp-server. +%% Note: The order of the function clauses is significant. +%%-------------------------------------------------------------------------- + +handle_info(timeout, #state{caller = open} = State) -> + {stop, timeout, State}; + +handle_info(timeout, State) -> + {noreply, State}; + +%%% Data socket messages %%% +handle_info({Trpt, Socket, Data}, + #state{dsock = {Trpt,Socket}, + caller = {recv_file, Fd}} = State0) when Trpt==tcp;Trpt==ssl -> + ?DBG('L~p --data ~p ----> ~s~p~n',[?LINE,Socket,Data,State0]), + ok = file_write(binary_to_list(Data), Fd), + progress_report({binary, Data}, State0), + State = activate_data_connection(State0), + {noreply, State}; + +handle_info({Trpt, Socket, Data}, #state{dsock = {Trpt,Socket}, client = From, + caller = recv_chunk} + = State) when Trpt==tcp;Trpt==ssl -> + ?DBG('L~p --data ~p ----> ~s~p~n',[?LINE,Socket,Data,State]), + gen_server:reply(From, {ok, Data}), + {noreply, State#state{client = undefined, data = <<>>}}; + +handle_info({Trpt, Socket, Data}, #state{dsock = {Trpt,Socket}} = State0) when Trpt==tcp;Trpt==ssl -> + ?DBG('L~p --data ~p ----> ~s~p~n',[?LINE,Socket,Data,State0]), + State = activate_data_connection(State0), + {noreply, State#state{data = <<(State#state.data)/binary, + Data/binary>>}}; + +handle_info({Cls, Socket}, #state{dsock = {Trpt,Socket}, + caller = {recv_file, Fd}} = State0) + when {Cls,Trpt}=={tcp_closed,tcp} ; {Cls,Trpt}=={ssl_closed,ssl} -> + file_close(Fd), + progress_report({transfer_size, 0}, State0), + State = activate_ctrl_connection(State0), + ?DBG("Data channel close",[]), + {noreply, State#state{dsock = undefined, data = <<>>}}; + +handle_info({Cls, Socket}, #state{dsock = {Trpt,Socket}, + client = Client, + caller = recv_chunk} = State0) + when {Cls,Trpt}=={tcp_closed,tcp} ; {Cls,Trpt}=={ssl_closed,ssl} -> + ?DBG("Data channel close recv_chunk",[]), + State = activate_ctrl_connection(State0), + {noreply, State#state{dsock = undefined, + caller = #recv_chunk_closing{dconn_closed = true, + client_called_us = Client =/= undefined} + }}; + +handle_info({Cls, Socket}, #state{dsock = {Trpt,Socket}, caller = recv_bin, + data = Data} = State0) + when {Cls,Trpt}=={tcp_closed,tcp} ; {Cls,Trpt}=={ssl_closed,ssl} -> + ?DBG("Data channel close",[]), + State = activate_ctrl_connection(State0), + {noreply, State#state{dsock = undefined, data = <<>>, + caller = {recv_bin, Data}}}; + +handle_info({Cls, Socket}, #state{dsock = {Trpt,Socket}, data = Data, + caller = {handle_dir_result, Dir}} + = State0) when {Cls,Trpt}=={tcp_closed,tcp} ; {Cls,Trpt}=={ssl_closed,ssl} -> + ?DBG("Data channel close",[]), + State = activate_ctrl_connection(State0), + {noreply, State#state{dsock = undefined, + caller = {handle_dir_result, Dir, Data}, +% data = <<?CR,?LF>>}}; + data = <<>>}}; + +handle_info({Err, Socket, Reason}, #state{dsock = {Trpt,Socket}, + client = From} = State) + when {Err,Trpt}=={tcp_error,tcp} ; {Err,Trpt}=={ssl_error,ssl} -> + gen_server:reply(From, {error, Reason}), + close_data_connection(State), + {noreply, State#state{dsock = undefined, client = undefined, + data = <<>>, caller = undefined, chunk = false}}; + +%%% Ctrl socket messages %%% +handle_info({Transport, Socket, Data}, #state{csock = {Transport, Socket}, + verbose = Verbose, + caller = Caller, + client = From, + ctrl_data = {CtrlData, AccLines, + LineStatus}} + = State0) -> + ?DBG('--ctrl ~p ----> ~s~p~n',[Socket,<<CtrlData/binary, Data/binary>>,State]), + case ftp_response:parse_lines(<<CtrlData/binary, Data/binary>>, + AccLines, LineStatus) of + {ok, Lines, NextMsgData} -> + verbose(Lines, Verbose, 'receive'), + CtrlResult = ftp_response:interpret(Lines), + case Caller of + quote -> + gen_server:reply(From, string:tokens(Lines, [?CR, ?LF])), + {noreply, State0#state{client = undefined, + caller = undefined, + latest_ctrl_response = Lines, + ctrl_data = {NextMsgData, [], + start}}}; + _ -> + ?DBG(' ...handle_ctrl_result(~p,...) ctrl_data=~p~n',[CtrlResult,{NextMsgData, [], start}]), + handle_ctrl_result(CtrlResult, + State0#state{latest_ctrl_response = Lines, + ctrl_data = + {NextMsgData, [], start}}) + end; + {continue, NewCtrlData} -> + ?DBG(' ...Continue... ctrl_data=~p~n',[NewCtrlData]), + State = activate_ctrl_connection(State0), + {noreply, State#state{ctrl_data = NewCtrlData}} + end; + +%% If the server closes the control channel it is +%% the expected behavior that connection process terminates. +handle_info({Cls, Socket}, #state{csock = {Trpt, Socket}}) + when {Cls,Trpt}=={tcp_closed,tcp} ; {Cls,Trpt}=={ssl_closed,ssl} -> + exit(normal); %% User will get error message from terminate/2 + +handle_info({Err, Socket, Reason}, _) when Err==tcp_error ; Err==ssl_error -> + Report = + io_lib:format("~p on socket: ~p for reason: ~p~n", + [Err, Socket, Reason]), + error_logger:error_report(Report), + %% If tcp does not work the only option is to terminate, + %% this is the expected behavior under these circumstances. + exit(normal); %% User will get error message from terminate/2 + +%% Monitor messages - if the process owning the ftp connection goes +%% down there is no point in continuing. +handle_info({'DOWN', _Ref, _Type, _Process, normal}, State) -> + {stop, normal, State#state{client = undefined}}; + +handle_info({'DOWN', _Ref, _Type, _Process, shutdown}, State) -> + {stop, normal, State#state{client = undefined}}; + +handle_info({'DOWN', _Ref, _Type, _Process, timeout}, State) -> + {stop, normal, State#state{client = undefined}}; + +handle_info({'DOWN', _Ref, _Type, Process, Reason}, State) -> + {stop, {stopped, {'EXIT', Process, Reason}}, + State#state{client = undefined}}; + +handle_info({'EXIT', Pid, Reason}, #state{progress = Pid} = State) -> + Report = io_lib:format("Progress reporting stopped for reason ~p~n", + [Reason]), + error_logger:info_report(Report), + {noreply, State#state{progress = ignore}}; + +%% Catch all - throws away unknown messages (This could happen by "accident" +%% so we do not want to crash, but we make a log entry as it is an +%% unwanted behaviour.) +handle_info(Info, State) -> + Report = io_lib:format("ftp : ~p : Unexpected message: ~p~nState: ~p~n", + [self(), Info, State]), + error_logger:info_report(Report), + {noreply, State}. + +%%-------------------------------------------------------------------------- +%% terminate/2 and code_change/3 +%%-------------------------------------------------------------------------- +terminate(normal, State) -> + %% If terminate reason =/= normal the progress reporting process will + %% be killed by the exit signal. + progress_report(stop, State), + do_terminate({error, econn}, State); +terminate(Reason, State) -> + Report = io_lib:format("Ftp connection closed due to: ~p~n", [Reason]), + error_logger:error_report(Report), + do_terminate({error, eclosed}, State). + +do_terminate(ErrorMsg, State) -> + close_data_connection(State), + close_ctrl_connection(State), + case State#state.client of + undefined -> + ok; + From -> + gen_server:reply(From, ErrorMsg) + end, + ok. + +code_change(_Vsn, State1, upgrade_from_pre_5_12) -> + {state, CSock, DSock, Verbose, LDir, Type, Chunk, Mode, Timeout, + Data, CtrlData, Owner, Client, Caller, IPv6Disable, Progress} = State1, + IpFamily = + if + (IPv6Disable =:= true) -> + inet; + true -> + inet6fb4 + end, + State2 = #state{csock = CSock, + dsock = DSock, + verbose = Verbose, + ldir = LDir, + type = Type, + chunk = Chunk, + mode = Mode, + timeout = Timeout, + data = Data, + ctrl_data = CtrlData, + owner = Owner, + client = Client, + caller = Caller, + ipfamily = IpFamily, + progress = Progress}, + {ok, State2}; + +code_change(_Vsn, State1, downgrade_to_pre_5_12) -> + #state{csock = CSock, + dsock = DSock, + verbose = Verbose, + ldir = LDir, + type = Type, + chunk = Chunk, + mode = Mode, + timeout = Timeout, + data = Data, + ctrl_data = CtrlData, + owner = Owner, + client = Client, + caller = Caller, + ipfamily = IpFamily, + progress = Progress} = State1, + IPv6Disable = + if + (IpFamily =:= inet) -> + true; + true -> + false + end, + State2 = + {state, CSock, DSock, Verbose, LDir, Type, Chunk, Mode, Timeout, + Data, CtrlData, Owner, Client, Caller, IPv6Disable, Progress}, + {ok, State2}; + +code_change(_Vsn, State, _Extra) -> + {ok, State}. + + +%%%========================================================================= +%% Start/stop +%%%========================================================================= +%%-------------------------------------------------------------------------- +%% start_link([Opts, GenServerOptions]) -> {ok, Pid} | {error, Reason} +%% +%% Description: Callback function for the ftp supervisor. It is called +%% : when start_service/1 calls ftp_sup:start_child/1 to start an +%% : instance of the ftp process. Also called by start_standalone/1 +%%-------------------------------------------------------------------------- +start_link([Opts, GenServerOptions]) -> + start_link(Opts, GenServerOptions). + +start_link(Opts, GenServerOptions) -> + case lists:keysearch(client, 1, Opts) of + {value, _} -> + %% Via the supervisor + gen_server:start_link(?MODULE, Opts, GenServerOptions); + false -> + Opts2 = [{client, self()} | Opts], + gen_server:start_link(?MODULE, Opts2, GenServerOptions) + end. + + +%%% Stop functionality is handled by close/1 + +%%%======================================================================== +%%% Internal functions +%%%======================================================================== + +%%-------------------------------------------------------------------------- +%%% Help functions to handle_call and/or handle_ctrl_result +%%-------------------------------------------------------------------------- +%% User handling +handle_user(User, Password, Acc, State0) -> + _ = send_ctrl_message(State0, mk_cmd("USER ~s", [User])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {handle_user, Password, Acc}}}. + +handle_user_passwd(Password, Acc, State0) -> + _ = send_ctrl_message(State0, mk_cmd("PASS ~s", [Password])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {handle_user_passwd, Acc}}}. + +handle_user_account(Acc, State0) -> + _ = send_ctrl_message(State0, mk_cmd("ACCT ~s", [Acc])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = handle_user_account}}. + + +%%-------------------------------------------------------------------------- +%% handle_ctrl_result +%%-------------------------------------------------------------------------- +handle_ctrl_result({tls_upgrade, _}, #state{csock = {tcp, Socket}, + tls_options = TLSOptions, + timeout = Timeout, + caller = open, client = From} + = State0) -> + ?DBG('<--ctrl ssl:connect(~p, ~p)~n~p~n',[Socket,TLSOptions,State0]), + case ssl:connect(Socket, TLSOptions, Timeout) of + {ok, TLSSocket} -> + State1 = State0#state{csock = {ssl,TLSSocket}}, + _ = send_ctrl_message(State1, mk_cmd("PBSZ 0", [])), + State = activate_ctrl_connection(State1), + {noreply, State#state{tls_upgrading_data_connection = {true, pbsz}} }; + {error, _} = Error -> + gen_server:reply(From, {Error, self()}), + {stop, normal, State0#state{client = undefined, + caller = undefined, + tls_upgrading_data_connection = false}} + end; + +handle_ctrl_result({pos_compl, _}, #state{tls_upgrading_data_connection = {true, pbsz}} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("PROT P", [])), + State = activate_ctrl_connection(State0), + {noreply, State#state{tls_upgrading_data_connection = {true, prot}}}; + +handle_ctrl_result({pos_compl, _}, #state{tls_upgrading_data_connection = {true, prot}, + client = From} = State) -> + gen_server:reply(From, {ok, self()}), + {noreply, State#state{client = undefined, + caller = undefined, + tls_upgrading_data_connection = false}}; + +handle_ctrl_result({pos_compl, _}, #state{caller = open, client = From} + = State) -> + gen_server:reply(From, {ok, self()}), + {noreply, State#state{client = undefined, + caller = undefined }}; +handle_ctrl_result({_, Lines}, #state{caller = open} = State) -> + ctrl_result_response(econn, State, {error, Lines}); + +%%-------------------------------------------------------------------------- +%% Data connection setup active mode +handle_ctrl_result({pos_compl, _Lines}, + #state{mode = active, + caller = {setup_data_connection, + {LSock, Caller}}} = State) -> + handle_caller(State#state{caller = Caller, dsock = {lsock, LSock}}); + +handle_ctrl_result({Status, _Lines}, + #state{mode = active, + caller = {setup_data_connection, {LSock, _}}} + = State) -> + close_connection({tcp,LSock}), + ctrl_result_response(Status, State, {error, Status}); + +%% Data connection setup passive mode +handle_ctrl_result({pos_compl, Lines}, + #state{mode = passive, + ipfamily = inet6, + client = From, + caller = {setup_data_connection, Caller}, + csock = CSock, + sockopts_data_passive = SockOpts, + timeout = Timeout} + = State) -> + [_, PortStr | _] = lists:reverse(string:tokens(Lines, "|")), + {ok, {IP, _}} = peername(CSock), + case connect(IP, list_to_integer(PortStr), SockOpts, Timeout, State) of + {ok, _, Socket} -> + handle_caller(State#state{caller = Caller, dsock = {tcp, Socket}}); + {error, _Reason} = Error -> + gen_server:reply(From, Error), + {noreply, State#state{client = undefined, caller = undefined}} + end; + +handle_ctrl_result({pos_compl, Lines}, + #state{mode = passive, + ipfamily = inet, + client = From, + caller = {setup_data_connection, Caller}, + timeout = Timeout, + sockopts_data_passive = SockOpts, + ftp_extension = false} = State) -> + + {_, [?LEFT_PAREN | Rest]} = + lists:splitwith(fun(?LEFT_PAREN) -> false; (_) -> true end, Lines), + {NewPortAddr, _} = + lists:splitwith(fun(?RIGHT_PAREN) -> false; (_) -> true end, Rest), + [A1, A2, A3, A4, P1, P2] = + lists:map(fun(X) -> list_to_integer(X) end, + string:tokens(NewPortAddr, [$,])), + IP = {A1, A2, A3, A4}, + Port = (P1 * 256) + P2, + + ?DBG('<--data tcp connect to ~p:~p, Caller=~p~n',[IP,Port,Caller]), + case connect(IP, Port, SockOpts, Timeout, State) of + {ok, _, Socket} -> + handle_caller(State#state{caller = Caller, dsock = {tcp,Socket}}); + {error, _Reason} = Error -> + gen_server:reply(From, Error), + {noreply,State#state{client = undefined, caller = undefined}} + end; + +handle_ctrl_result({pos_compl, Lines}, + #state{mode = passive, + ipfamily = inet, + client = From, + caller = {setup_data_connection, Caller}, + csock = CSock, + timeout = Timeout, + sockopts_data_passive = SockOpts, + ftp_extension = true} = State) -> + + [_, PortStr | _] = lists:reverse(string:tokens(Lines, "|")), + {ok, {IP, _}} = peername(CSock), + + ?DBG('<--data tcp connect to ~p:~p, Caller=~p~n',[IP,PortStr,Caller]), + case connect(IP, list_to_integer(PortStr), SockOpts, Timeout, State) of + {ok, _, Socket} -> + handle_caller(State#state{caller = Caller, dsock = {tcp, Socket}}); + {error, _Reason} = Error -> + gen_server:reply(From, Error), + {noreply, State#state{client = undefined, caller = undefined}} + end; + + +%% FTP server does not support passive mode: try to fallback on active mode +handle_ctrl_result(_, + #state{mode = passive, + caller = {setup_data_connection, Caller}} = State) -> + setup_data_connection(State#state{mode = active, caller = Caller}); + + +%%-------------------------------------------------------------------------- +%% User handling +handle_ctrl_result({pos_interm, _}, + #state{caller = {handle_user, PassWord, Acc}} = State) -> + handle_user_passwd(PassWord, Acc, State); +handle_ctrl_result({Status, _}, + #state{caller = {handle_user, _, _}} = State) -> + ctrl_result_response(Status, State, {error, euser}); + +%% Accounts +handle_ctrl_result({pos_interm_acct, _}, + #state{caller = {handle_user_passwd, Acc}} = State) + when Acc =/= "" -> + handle_user_account(Acc, State); +handle_ctrl_result({Status, _}, + #state{caller = {handle_user_passwd, _}} = State) -> + ctrl_result_response(Status, State, {error, euser}); + +%%-------------------------------------------------------------------------- +%% Print current working directory +handle_ctrl_result({pos_compl, Lines}, + #state{caller = pwd, client = From} = State) -> + Dir = pwd_result(Lines), + gen_server:reply(From, {ok, Dir}), + {noreply, State#state{client = undefined, caller = undefined}}; + +%%-------------------------------------------------------------------------- +%% Directory listing +handle_ctrl_result({pos_prel, _}, #state{caller = {dir, Dir}} = State0) -> + case accept_data_connection(State0) of + {ok, State1} -> + State = activate_data_connection(State1), + {noreply, State#state{caller = {handle_dir_result, Dir}}}; + {error, _Reason} = ERROR -> + case State0#state.client of + undefined -> + {stop, ERROR, State0}; + From -> + gen_server:reply(From, ERROR), + {stop, normal, State0#state{client = undefined}} + end + end; + +handle_ctrl_result({pos_compl, _}, #state{caller = {handle_dir_result, Dir, + Data}, client = From} + = State) -> + case Dir of + "" -> % Current directory + gen_server:reply(From, {ok, Data}), + {noreply, State#state{client = undefined, + caller = undefined}}; + _ -> + %% <WTF> + %% Dir cannot be assumed to be a dir. It is a string that + %% could be a dir, but could also be a file or even a string + %% containing wildcards (*). + %% + %% %% If there is only one line it might be a directory with one + %% %% file but it might be an error message that the directory + %% %% was not found. So in this case we have to endure a little + %% %% overhead to be able to give a good return value. Alas not + %% %% all ftp implementations behave the same and returning + %% %% an error string is allowed by the FTP RFC. + %% case lists:dropwhile(fun(?CR) -> false;(_) -> true end, + %% binary_to_list(Data)) of + %% L when (L =:= [?CR, ?LF]) orelse (L =:= []) -> + %% send_ctrl_message(State, mk_cmd("PWD", [])), + %% activate_ctrl_connection(State), + %% {noreply, + %% State#state{caller = {handle_dir_data, Dir, Data}}}; + %% _ -> + %% gen_server:reply(From, {ok, Data}), + %% {noreply, State#state{client = undefined, + %% caller = undefined}} + %% end + %% </WTF> + gen_server:reply(From, {ok, Data}), + {noreply, State#state{client = undefined, + caller = undefined}} + end; + +handle_ctrl_result({pos_compl, Lines}, + #state{caller = {handle_dir_data, Dir, DirData}} = + State0) -> + OldDir = pwd_result(Lines), + _ = send_ctrl_message(State0, mk_cmd("CWD ~s", [Dir])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {handle_dir_data_second_phase, OldDir, + DirData}}}; +handle_ctrl_result({Status, _}, + #state{caller = {handle_dir_data, _, _}} = State) -> + ctrl_result_response(Status, State, {error, epath}); + +handle_ctrl_result(S={_Status, _}, + #state{caller = {handle_dir_result, _, _}} = State) -> + %% OTP-5731, macosx + ctrl_result_response(S, State, {error, epath}); + +handle_ctrl_result({pos_compl, _}, + #state{caller = {handle_dir_data_second_phase, OldDir, + DirData}} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("CWD ~s", [OldDir])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {handle_dir_data_third_phase, DirData}}}; +handle_ctrl_result({Status, _}, + #state{caller = {handle_dir_data_second_phase, _, _}} + = State) -> + ctrl_result_response(Status, State, {error, epath}); +handle_ctrl_result(_, #state{caller = {handle_dir_data_third_phase, DirData}, + client = From} = State) -> + gen_server:reply(From, {ok, DirData}), + {noreply, State#state{client = undefined, caller = undefined}}; + +handle_ctrl_result({Status, _}, #state{caller = cd} = State) -> + ctrl_result_response(Status, State, {error, Status}); + +handle_ctrl_result(Status={epath, _}, #state{caller = {dir,_}} = State) -> + ctrl_result_response(Status, State, {error, epath}); + +%%-------------------------------------------------------------------------- +%% File renaming +handle_ctrl_result({pos_interm, _}, #state{caller = {rename, NewFile}} + = State0) -> + _ = send_ctrl_message(State0, mk_cmd("RNTO ~s", [NewFile])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = rename_second_phase}}; + +handle_ctrl_result({Status, _}, + #state{caller = {rename, _}} = State) -> + ctrl_result_response(Status, State, {error, Status}); + +handle_ctrl_result({Status, _}, + #state{caller = rename_second_phase} = State) -> + ctrl_result_response(Status, State, {error, Status}); + +%%-------------------------------------------------------------------------- +%% File handling - recv_bin +handle_ctrl_result({pos_prel, _}, #state{caller = recv_bin} = State0) -> + case accept_data_connection(State0) of + {ok, State1} -> + State = activate_data_connection(State1), + {noreply, State}; + {error, _Reason} = ERROR -> + case State0#state.client of + undefined -> + {stop, ERROR, State0}; + From -> + gen_server:reply(From, ERROR), + {stop, normal, State0#state{client = undefined}} + end + end; + +handle_ctrl_result({pos_compl, _}, #state{caller = {recv_bin, Data}, + client = From} = State) -> + gen_server:reply(From, {ok, Data}), + close_data_connection(State), + {noreply, State#state{client = undefined, caller = undefined}}; + +handle_ctrl_result({Status, _}, #state{caller = recv_bin} = State) -> + close_data_connection(State), + ctrl_result_response(Status, State#state{dsock = undefined}, + {error, epath}); + +handle_ctrl_result({Status, _}, #state{caller = {recv_bin, _}} = State) -> + close_data_connection(State), + ctrl_result_response(Status, State#state{dsock = undefined}, + {error, epath}); +%%-------------------------------------------------------------------------- +%% File handling - start_chunk_transfer +handle_ctrl_result({pos_prel, _}, #state{client = From, + caller = start_chunk_transfer} + = State0) -> + case accept_data_connection(State0) of + {ok, State1} -> + State = start_chunk(State1), + {noreply, State}; + {error, _Reason} = ERROR -> + case State0#state.client of + undefined -> + {stop, ERROR, State0}; + From -> + gen_server:reply(From, ERROR), + {stop, normal, State0#state{client = undefined}} + end + end; + +%%-------------------------------------------------------------------------- +%% File handling - chunk_transfer complete + +handle_ctrl_result({pos_compl, _}, #state{client = From, + caller = #recv_chunk_closing{dconn_closed = true, + client_called_us = true, + pos_compl_received = false + }} + = State0) when From =/= undefined -> + %% The pos_compl was the last event we waited for, finnish and clean up + ?DBG("recv_chunk_closing pos_compl, last event",[]), + gen_server:reply(From, ok), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = undefined, + chunk = false, + client = undefined}}; + +handle_ctrl_result({pos_compl, _}, #state{caller = #recv_chunk_closing{}=R} + = State0) -> + %% Waiting for more, don't care what + ?DBG("recv_chunk_closing pos_compl, wait more",[]), + {noreply, State0#state{caller = R#recv_chunk_closing{pos_compl_received=true}}}; + + +%%-------------------------------------------------------------------------- +%% File handling - recv_file +handle_ctrl_result({pos_prel, _}, #state{caller = {recv_file, _}} = State0) -> + case accept_data_connection(State0) of + {ok, State1} -> + State = activate_data_connection(State1), + {noreply, State}; + {error, _Reason} = ERROR -> + case State0#state.client of + undefined -> + {stop, ERROR, State0}; + From -> + gen_server:reply(From, ERROR), + {stop, normal, State0#state{client = undefined}} + end + end; + +handle_ctrl_result({Status, _}, #state{caller = {recv_file, Fd}} = State) -> + file_close(Fd), + close_data_connection(State), + ctrl_result_response(Status, State#state{dsock = undefined}, + {error, epath}); +%%-------------------------------------------------------------------------- +%% File handling - transfer_* +handle_ctrl_result({pos_prel, _}, #state{caller = {transfer_file, Fd}} + = State0) -> + case accept_data_connection(State0) of + {ok, State1} -> + send_file(State1, Fd); + {error, _Reason} = ERROR -> + case State0#state.client of + undefined -> + {stop, ERROR, State0}; + From -> + gen_server:reply(From, ERROR), + {stop, normal, State0#state{client = undefined}} + end + end; + +handle_ctrl_result({pos_prel, _}, #state{caller = {transfer_data, Bin}} + = State0) -> + case accept_data_connection(State0) of + {ok, State} -> + send_bin(State, Bin); + {error, _Reason} = ERROR -> + case State0#state.client of + undefined -> + {stop, ERROR, State0}; + From -> + gen_server:reply(From, ERROR), + {stop, normal, State0#state{client = undefined}} + end + end; + +%%-------------------------------------------------------------------------- +%% Default +handle_ctrl_result({Status, _Lines}, #state{client = From} = State) + when From =/= undefined -> + ctrl_result_response(Status, State, {error, Status}). + +%%-------------------------------------------------------------------------- +%% Help functions to handle_ctrl_result +%%-------------------------------------------------------------------------- +ctrl_result_response(pos_compl, #state{client = From} = State, _) -> + gen_server:reply(From, ok), + {noreply, State#state{client = undefined, caller = undefined}}; + +ctrl_result_response(enofile, #state{client = From} = State, _) -> + gen_server:reply(From, {error, enofile}), + {noreply, State#state{client = undefined, caller = undefined}}; + +ctrl_result_response(Status, #state{client = From} = State, _) + when (Status =:= etnospc) orelse + (Status =:= epnospc) orelse + (Status =:= efnamena) orelse + (Status =:= econn) -> + gen_server:reply(From, {error, Status}), +%% {stop, normal, {error, Status}, State#state{client = undefined}}; + {stop, normal, State#state{client = undefined}}; + +ctrl_result_response(_, #state{client = From} = State, ErrorMsg) -> + gen_server:reply(From, ErrorMsg), + {noreply, State#state{client = undefined, caller = undefined}}. + +%%-------------------------------------------------------------------------- +handle_caller(#state{caller = {dir, Dir, Len}} = State0) -> + Cmd = case Len of + short -> "NLST"; + long -> "LIST" + end, + _ = case Dir of + "" -> + send_ctrl_message(State0, mk_cmd(Cmd, "")); + _ -> + send_ctrl_message(State0, mk_cmd(Cmd ++ " ~s", [Dir])) + end, + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {dir, Dir}}}; + +handle_caller(#state{caller = {recv_bin, RemoteFile}} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("RETR ~s", [RemoteFile])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = recv_bin}}; + +handle_caller(#state{caller = {start_chunk_transfer, Cmd, RemoteFile}} = + State0) -> + _ = send_ctrl_message(State0, mk_cmd("~s ~s", [Cmd, RemoteFile])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = start_chunk_transfer}}; + +handle_caller(#state{caller = {recv_file, RemoteFile, Fd}} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("RETR ~s", [RemoteFile])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {recv_file, Fd}}}; + +handle_caller(#state{caller = {transfer_file, {Cmd, LocalFile, RemoteFile}}, + ldir = LocalDir, client = From} = State0) -> + case file_open(filename:absname(LocalFile, LocalDir), read) of + {ok, Fd} -> + _ = send_ctrl_message(State0, mk_cmd("~s ~s", [Cmd, RemoteFile])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {transfer_file, Fd}}}; + {error, _} -> + gen_server:reply(From, {error, epath}), + {noreply, State0#state{client = undefined, caller = undefined, + dsock = undefined}} + end; + +handle_caller(#state{caller = {transfer_data, {Cmd, Bin, RemoteFile}}} = + State0) -> + _ = send_ctrl_message(State0, mk_cmd("~s ~s", [Cmd, RemoteFile])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {transfer_data, Bin}}}. + +%% ----------- FTP SERVER COMMUNICATION ------------------------- + +%% Connect to FTP server at Host (default is TCP port 21) +%% in order to establish a control connection. +setup_ctrl_connection(Host, Port, Timeout, #state{sockopts_ctrl = SockOpts} = State0) -> + MsTime = erlang:monotonic_time(), + case connect(Host, Port, SockOpts, Timeout, State0) of + {ok, IpFam, CSock} -> + State1 = State0#state{csock = {tcp, CSock}, ipfamily = IpFam}, + State = activate_ctrl_connection(State1), + case Timeout - millisec_passed(MsTime) of + Timeout2 when (Timeout2 >= 0) -> + {ok, State#state{caller = open}, Timeout2}; + _ -> + %% Oups: Simulate timeout + {ok, State#state{caller = open}, 0} + end; + Error -> + Error + end. + +setup_data_connection(#state{mode = active, + caller = Caller, + csock = CSock, + sockopts_data_active = SockOpts, + ftp_extension = FtpExt} = State0) -> + case (catch sockname(CSock)) of + {ok, {{_, _, _, _, _, _, _, _} = IP0, _}} -> + IP = proplists:get_value(ip, SockOpts, IP0), + {ok, LSock} = + gen_tcp:listen(0, [{ip, IP}, {active, false}, + inet6, binary, {packet, 0} | + lists:keydelete(ip,1,SockOpts)]), + {ok, {_, Port}} = sockname({tcp,LSock}), + IpAddress = inet_parse:ntoa(IP), + Cmd = mk_cmd("EPRT |2|~s|~p|", [IpAddress, Port]), + _ = send_ctrl_message(State0, Cmd), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {setup_data_connection, + {LSock, Caller}}}}; + {ok, {{_,_,_,_} = IP0, _}} -> + IP = proplists:get_value(ip, SockOpts, IP0), + {ok, LSock} = gen_tcp:listen(0, [{ip, IP}, {active, false}, + binary, {packet, 0} | + lists:keydelete(ip,1,SockOpts)]), + {ok, Port} = inet:port(LSock), + _ = case FtpExt of + false -> + {IP1, IP2, IP3, IP4} = IP, + {Port1, Port2} = {Port div 256, Port rem 256}, + send_ctrl_message(State0, + mk_cmd("PORT ~w,~w,~w,~w,~w,~w", + [IP1, IP2, IP3, IP4, Port1, Port2])); + true -> + IpAddress = inet_parse:ntoa(IP), + Cmd = mk_cmd("EPRT |1|~s|~p|", [IpAddress, Port]), + send_ctrl_message(State0, Cmd) + end, + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {setup_data_connection, + {LSock, Caller}}}} + end; + +setup_data_connection(#state{mode = passive, ipfamily = inet6, + caller = Caller} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("EPSV", [])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {setup_data_connection, Caller}}}; + +setup_data_connection(#state{mode = passive, ipfamily = inet, + caller = Caller, + ftp_extension = false} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("PASV", [])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {setup_data_connection, Caller}}}; + +setup_data_connection(#state{mode = passive, ipfamily = inet, + caller = Caller, + ftp_extension = true} = State0) -> + _ = send_ctrl_message(State0, mk_cmd("EPSV", [])), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = {setup_data_connection, Caller}}}. + +connect(Host, Port, SockOpts, Timeout, #state{ipfamily = inet = IpFam}) -> + connect2(Host, Port, IpFam, SockOpts, Timeout); + +connect(Host, Port, SockOpts, Timeout, #state{ipfamily = inet6 = IpFam}) -> + connect2(Host, Port, IpFam, SockOpts, Timeout); + +connect(Host, Port, SockOpts, Timeout, #state{ipfamily = inet6fb4}) -> + case inet:getaddr(Host, inet6) of + {ok, {0, 0, 0, 0, 0, 16#ffff, _, _} = IPv6} -> + case inet:getaddr(Host, inet) of + {ok, IPv4} -> + IpFam = inet, + connect2(IPv4, Port, IpFam, SockOpts, Timeout); + + _ -> + IpFam = inet6, + connect2(IPv6, Port, IpFam, SockOpts, Timeout) + end; + + {ok, IPv6} -> + IpFam = inet6, + connect2(IPv6, Port, IpFam, SockOpts, Timeout); + + _ -> + case inet:getaddr(Host, inet) of + {ok, IPv4} -> + IpFam = inet, + connect2(IPv4, Port, IpFam, SockOpts, Timeout); + Error -> + Error + end + end. + +connect2(Host, Port, IpFam, SockOpts, Timeout) -> + Opts = [IpFam, binary, {packet, 0}, {active, false} | SockOpts], + case gen_tcp:connect(Host, Port, Opts, Timeout) of + {ok, Sock} -> + {ok, IpFam, Sock}; + Error -> + Error + end. + + +accept_data_connection(#state{mode = active, + dtimeout = DTimeout, + tls_options = TLSOptions, + dsock = {lsock, LSock}} = State0) -> + case gen_tcp:accept(LSock, DTimeout) of + {ok, Socket} when is_list(TLSOptions) -> + gen_tcp:close(LSock), + ?DBG('<--data ssl:connect(~p, ~p)~n~p~n',[Socket,TLSOptions,State0]), + case ssl:connect(Socket, TLSOptions, DTimeout) of + {ok, TLSSocket} -> + {ok, State0#state{dsock={ssl,TLSSocket}}}; + {error, Reason} -> + {error, {ssl_connect_failed, Reason}} + end; + {ok, Socket} -> + gen_tcp:close(LSock), + {ok, State0#state{dsock={tcp,Socket}}}; + {error, Reason} -> + {error, {data_connect_failed, Reason}} + end; + +accept_data_connection(#state{mode = passive, + dtimeout = DTimeout, + dsock = {tcp,Socket}, + tls_options = TLSOptions} = State) when is_list(TLSOptions) -> + ?DBG('<--data ssl:connect(~p, ~p)~n~p~n',[Socket,TLSOptions,State]), + case ssl:connect(Socket, TLSOptions, DTimeout) of + {ok, TLSSocket} -> + {ok, State#state{dsock={ssl,TLSSocket}}}; + {error, Reason} -> + {error, {ssl_connect_failed, Reason}} + end; +accept_data_connection(#state{mode = passive} = State) -> + {ok,State}. + + +send_ctrl_message(_S=#state{csock = Socket, verbose = Verbose}, Message) -> + verbose(lists:flatten(Message),Verbose,send), + ?DBG('<--ctrl ~p ---- ~s~p~n',[Socket,Message,_S]), + _ = send_message(Socket, Message). + +send_data_message(_S=#state{dsock = Socket}, Message) -> + ?DBG('<==data ~p ==== ~s~n~p~n',[Socket,Message,_S]), + case send_message(Socket, Message) of + ok -> + ok; + {error, Reason} -> + Report = io_lib:format("send/2 for socket ~p failed with " + "reason ~p~n", [Socket, Reason]), + error_logger:error_report(Report), + %% If tcp/ssl does not work the only option is to terminate, + %% this is the expected behavior under these circumstances. + exit(normal) %% User will get error message from terminate/2 + end. + +send_message({tcp, Socket}, Message) -> + gen_tcp:send(Socket, Message); +send_message({ssl, Socket}, Message) -> + ssl:send(Socket, Message). + +activate_ctrl_connection(#state{csock = CSock, ctrl_data = {<<>>, _, _}} = State) -> + activate_connection(CSock), + State; +activate_ctrl_connection(#state{csock = CSock} = State0) -> + activate_connection(CSock), + %% We have already received at least part of the next control message, + %% that has been saved in ctrl_data, process this first. + {noreply, State} = handle_info({socket_type(CSock), unwrap_socket(CSock), <<>>}, State0), + State. + +activate_data_connection(#state{dsock = DSock} = State) -> + activate_connection(DSock), + State. + +activate_connection(Socket) -> + ignore_return_value( + case socket_type(Socket) of + tcp -> inet:setopts(unwrap_socket(Socket), [{active, once}]); + ssl -> ssl:setopts(unwrap_socket(Socket), [{active, once}]) + end). + + +ignore_return_value(_) -> ok. + +unwrap_socket({tcp,Socket}) -> Socket; +unwrap_socket({ssl,Socket}) -> Socket. + +socket_type({tcp,_Socket}) -> tcp; +socket_type({ssl,_Socket}) -> ssl. + +close_ctrl_connection(#state{csock = undefined}) -> ok; +close_ctrl_connection(#state{csock = Socket}) -> close_connection(Socket). + +close_data_connection(#state{dsock = undefined}) -> ok; +close_data_connection(#state{dsock = Socket}) -> close_connection(Socket). + +close_connection({lsock,Socket}) -> ignore_return_value( gen_tcp:close(Socket) ); +close_connection({tcp, Socket}) -> ignore_return_value( gen_tcp:close(Socket) ); +close_connection({ssl, Socket}) -> ignore_return_value( ssl:close(Socket) ). + +%% ------------ FILE HANDLING ---------------------------------------- +send_file(#state{tls_upgrading_data_connection = {true, CTRL, _}} = State, Fd) -> + {noreply, State#state{tls_upgrading_data_connection = {true, CTRL, ?MODULE, send_file, Fd}}}; +send_file(State0, Fd) -> + case file_read(Fd) of + {ok, N, Bin} when N > 0 -> + send_data_message(State0, Bin), + progress_report({binary, Bin}, State0), + send_file(State0, Fd); + {ok, _, _} -> + file_close(Fd), + close_data_connection(State0), + progress_report({transfer_size, 0}, State0), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = transfer_file_second_phase, + dsock = undefined}}; + {error, Reason} -> + gen_server:reply(State0#state.client, {error, Reason}), + {stop, normal, State0#state{client = undefined}} + end. + +file_open(File, Option) -> + file:open(File, [raw, binary, Option]). + +file_close(Fd) -> + ignore_return_value( file:close(Fd) ). + +file_read(Fd) -> + case file:read(Fd, ?FILE_BUFSIZE) of + {ok, Bytes} -> + {ok, size(Bytes), Bytes}; + eof -> + {ok, 0, []}; + Other -> + Other + end. + +file_write(Bytes, Fd) -> + file:write(Fd, Bytes). + +%% -------------- MISC ---------------------------------------------- + +call(GenServer, Msg, Format) -> + call(GenServer, Msg, Format, infinity). +call(GenServer, Msg, Format, Timeout) -> + Req = {self(), Msg}, + case (catch gen_server:call(GenServer, Req, Timeout)) of + {ok, Bin} when is_binary(Bin) andalso (Format =:= string) -> + {ok, binary_to_list(Bin)}; + {'EXIT', _} -> + {error, eclosed}; + Result -> + Result + end. + +cast(GenServer, Msg) -> + gen_server:cast(GenServer, {self(), Msg}). + +send_bin(#state{tls_upgrading_data_connection = {true, CTRL, _}} = State, Bin) -> + State#state{tls_upgrading_data_connection = {true, CTRL, ?MODULE, send_bin, Bin}}; +send_bin(State0, Bin) -> + send_data_message(State0, Bin), + close_data_connection(State0), + State = activate_ctrl_connection(State0), + {noreply, State#state{caller = transfer_data_second_phase, + dsock = undefined}}. + +mk_cmd(Fmt, Args) -> + [io_lib:format(Fmt, Args)| [?CR, ?LF]]. % Deep list ok. + +is_name_sane([]) -> + true; +is_name_sane([?CR| _]) -> + false; +is_name_sane([?LF| _]) -> + false; +is_name_sane([_| Rest]) -> + is_name_sane(Rest). + +pwd_result(Lines) -> + {_, [?DOUBLE_QUOTE | Rest]} = + lists:splitwith(fun(?DOUBLE_QUOTE) -> false; (_) -> true end, Lines), + {Dir, _} = + lists:splitwith(fun(?DOUBLE_QUOTE) -> false; (_) -> true end, Rest), + Dir. + + +key_search(Key, List, Default) -> + case lists:keysearch(Key, 1, List) of + {value, {_,Val}} -> + Val; + false -> + Default + end. + +verbose(Lines, true, Direction) -> + DirStr = + case Direction of + send -> + "Sending: "; + _ -> + "Receiving: " + end, + Str = string:strip(string:strip(Lines, right, ?LF), right, ?CR), + erlang:display(DirStr++Str); +verbose(_, false,_) -> + ok. + +progress(Options) -> + ftp_progress:start_link(Options). + +progress_report(_, #state{progress = ignore}) -> + ok; +progress_report(stop, #state{progress = ProgressPid}) -> + ftp_progress:stop(ProgressPid); +progress_report({binary, Data}, #state{progress = ProgressPid}) -> + ftp_progress:report(ProgressPid, {transfer_size, size(Data)}); +progress_report(Report, #state{progress = ProgressPid}) -> + ftp_progress:report(ProgressPid, Report). + + +peername({tcp, Socket}) -> inet:peername(Socket); +peername({ssl, Socket}) -> ssl:peername(Socket). + +sockname({tcp, Socket}) -> inet:sockname(Socket); +sockname({ssl, Socket}) -> ssl:sockname(Socket). + +maybe_tls_upgrade(Pid, undefined) -> + {ok, Pid}; +maybe_tls_upgrade(Pid, TLSOptions) -> + catch ssl:start(), + call(Pid, {open, tls_upgrade, TLSOptions}, plain). + +start_chunk(#state{tls_upgrading_data_connection = {true, CTRL, _}} = State) -> + State#state{tls_upgrading_data_connection = {true, CTRL, ?MODULE, start_chunk, undefined}}; +start_chunk(#state{client = From} = State) -> + gen_server:reply(From, ok), + State#state{chunk = true, + client = undefined, + caller = undefined}. + + +%% This function extracts the start options from the +%% Valid options: +%% debug, +%% verbose +%% ipfamily +%% priority +%% flags (for backward compatibillity) +start_options(Options) -> + case lists:keysearch(flags, 1, Options) of + {value, {flags, Flags}} -> + Verbose = lists:member(verbose, Flags), + IsTrace = lists:member(trace, Flags), + IsDebug = lists:member(debug, Flags), + DebugLevel = + if + (IsTrace =:= true) -> + trace; + IsDebug =:= true -> + debug; + true -> + disable + end, + {ok, [{verbose, Verbose}, + {debug, DebugLevel}, + {priority, low}]}; + false -> + ValidateVerbose = + fun(true) -> true; + (false) -> true; + (_) -> false + end, + ValidateDebug = + fun(trace) -> true; + (debug) -> true; + (disable) -> true; + (_) -> false + end, + ValidatePriority = + fun(low) -> true; + (normal) -> true; + (high) -> true; + (_) -> false + end, + ValidOptions = + [{verbose, ValidateVerbose, false, false}, + {debug, ValidateDebug, false, disable}, + {priority, ValidatePriority, false, low}], + validate_options(Options, ValidOptions, []) + end. + + +%% This function extracts and validates the open options from the +%% Valid options: +%% mode +%% host +%% port +%% timeout +%% dtimeout +%% progress +%% ftp_extension + +open_options(Options) -> + ValidateMode = + fun(active) -> true; + (passive) -> true; + (_) -> false + end, + ValidateHost = + fun(Host) when is_list(Host) -> + true; + (Host) when is_tuple(Host) andalso + ((size(Host) =:= 4) orelse (size(Host) =:= 8)) -> + true; + (_) -> + false + end, + ValidatePort = + fun(Port) when is_integer(Port) andalso (Port > 0) -> true; + (_) -> false + end, + ValidateIpFamily = + fun(inet) -> true; + (inet6) -> true; + (inet6fb4) -> true; + (_) -> false + end, + ValidateTimeout = + fun(Timeout) when is_integer(Timeout) andalso (Timeout >= 0) -> true; + (_) -> false + end, + ValidateDTimeout = + fun(DTimeout) when is_integer(DTimeout) andalso (DTimeout >= 0) -> true; + (infinity) -> true; + (_) -> false + end, + ValidateProgress = + fun(ignore) -> + true; + ({Mod, Func, _InitProgress}) when is_atom(Mod) andalso + is_atom(Func) -> + true; + (_) -> + false + end, + ValidateFtpExtension = + fun(true) -> true; + (false) -> true; + (_) -> false + end, + ValidOptions = + [{mode, ValidateMode, false, ?DEFAULT_MODE}, + {host, ValidateHost, true, ehost}, + {port, ValidatePort, false, ?FTP_PORT}, + {ipfamily, ValidateIpFamily, false, inet}, + {timeout, ValidateTimeout, false, ?CONNECTION_TIMEOUT}, + {dtimeout, ValidateDTimeout, false, ?DATA_ACCEPT_TIMEOUT}, + {progress, ValidateProgress, false, ?PROGRESS_DEFAULT}, + {ftp_extension, ValidateFtpExtension, false, ?FTP_EXT_DEFAULT}], + validate_options(Options, ValidOptions, []). + +socket_options(Options) -> + CtrlOpts = proplists:get_value(sock_ctrl, Options, []), + DataActOpts = proplists:get_value(sock_data_act, Options, CtrlOpts), + DataPassOpts = proplists:get_value(sock_data_pass, Options, CtrlOpts), + case [O || O <- lists:usort(CtrlOpts++DataPassOpts++DataActOpts), + not valid_socket_option(O)] of + [] -> + {ok, {CtrlOpts, DataPassOpts, DataActOpts}}; + Invalid -> + throw({error,{sock_opts,Invalid}}) + end. + + +valid_socket_option(inet ) -> false; +valid_socket_option(inet6 ) -> false; +valid_socket_option({ipv6_v6only, _}) -> false; +valid_socket_option({active,_} ) -> false; +valid_socket_option({packet,_} ) -> false; +valid_socket_option({mode,_} ) -> false; +valid_socket_option(binary ) -> false; +valid_socket_option(list ) -> false; +valid_socket_option({header,_} ) -> false; +valid_socket_option({packet_size,_} ) -> false; +valid_socket_option(_) -> true. + + +tls_options(Options) -> + %% Options will be validated by ssl application + proplists:get_value(tls, Options, undefined). + +validate_options([], [], Acc) -> + {ok, lists:reverse(Acc)}; +validate_options([], ValidOptions, Acc) -> + %% Check if any mandatory options are missing! + case [{Key, Reason} || {Key, _, true, Reason} <- ValidOptions] of + [] -> + Defaults = + [{Key, Default} || {Key, _, _, Default} <- ValidOptions], + {ok, lists:reverse(Defaults ++ Acc)}; + [{_, Reason}|_Missing] -> + throw({error, Reason}) + end; +validate_options([{Key, Value}|Options], ValidOptions, Acc) -> + case lists:keysearch(Key, 1, ValidOptions) of + {value, {Key, Validate, _, Default}} -> + case (catch Validate(Value)) of + true -> + NewValidOptions = lists:keydelete(Key, 1, ValidOptions), + validate_options(Options, NewValidOptions, + [{Key, Value} | Acc]); + _ -> + NewValidOptions = lists:keydelete(Key, 1, ValidOptions), + validate_options(Options, NewValidOptions, + [{Key, Default} | Acc]) + end; + false -> + validate_options(Options, ValidOptions, Acc) + end; +validate_options([_|Options], ValidOptions, Acc) -> + validate_options(Options, ValidOptions, Acc). + +%% Help function, elapsed milliseconds since T0 +millisec_passed(T0) -> + %% OTP 18 + erlang:convert_time_unit(erlang:monotonic_time() - T0, + native, + micro_seconds) div 1000. diff --git a/lib/ftp/src/ftp_app.erl b/lib/ftp/src/ftp_app.erl new file mode 100644 index 0000000000..d647d9fce3 --- /dev/null +++ b/lib/ftp/src/ftp_app.erl @@ -0,0 +1,47 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2002-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% + +%%%------------------------------------------------------------------- +%% @doc ftp public API +%% @end +%%%------------------------------------------------------------------- + +-module(ftp_app). + +-behaviour(application). + +%% Application callbacks +-export([start/2, stop/1]). + +%%==================================================================== +%% API +%%==================================================================== + +start(_StartType, _StartArgs) -> + ftp_sup:start_link(). + +%%-------------------------------------------------------------------- +stop(_State) -> + ok. + +%%==================================================================== +%% Internal functions +%%==================================================================== diff --git a/lib/ftp/src/ftp_internal.hrl b/lib/ftp/src/ftp_internal.hrl new file mode 100644 index 0000000000..84f980e8fd --- /dev/null +++ b/lib/ftp/src/ftp_internal.hrl @@ -0,0 +1,35 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2005-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% + +-ifndef(ftp_internal_hrl). +-define(ftp_internal_hrl, true). + +-define(CR, $\r). +-define(LF, $\n). +-define(CRLF, [$\r,$\n]). +-define(SP, $\s). +-define(TAB, $\t). +-define(LEFT_PAREN, $(). +-define(RIGHT_PAREN, $)). +-define(WHITE_SPACE, $ ). +-define(DOUBLE_QUOTE, $"). + +-endif. % -ifdef(ftp_internal_hrl). diff --git a/lib/ftp/src/ftp_progress.erl b/lib/ftp/src/ftp_progress.erl new file mode 100644 index 0000000000..64c612519d --- /dev/null +++ b/lib/ftp/src/ftp_progress.erl @@ -0,0 +1,136 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2005-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% +%% Description: This module impements a temporary process that +%% performes progress reporting during file transfer calling a user +%% defined callback function. Its life span is as long as the ftp connection +%% processes that spawned it lives. The purpose of this process is to +%% shild the ftp connection process from errors and time consuming operations +%% in the user defined callback function. + +-module(ftp_progress). + +%% Internal API +-export([start_link/1, report/2, stop/1]). + +%% Spawn export +-export([init/1]). + +-include_lib("kernel/include/file.hrl"). + +-record(progress, { + file :: string() | 'undefined', + cb_module :: module(), + cb_function :: atom(), + init_progress_term :: term(), + current_progress_term :: term() + }). + +%%%========================================================================= +%%% Internal application API +%%%========================================================================= +%%-------------------------------------------------------------------------- +%% start_link(Options) -> ignore | pid() +%% Options = ignore | {CBModule, CBFunction, InitProgressTerm} +%% +%% Description: Starts the progress report process unless progress reporting +%% should not be performed. +%%-------------------------------------------------------------------------- +-type options() :: 'ignore' | {module(), atom(), term()}. +-spec start_link(options()) -> 'ignore' | pid(). +start_link(ignore) -> + ignore; +start_link(Options) -> + spawn_link(?MODULE, init, [Options]). + +%%-------------------------------------------------------------------------- +%% report_progress(Pid, Report) -> ok +%% Pid = pid() +%% Report = {local_file, File} | {remote_file, File} | +%% {transfer_size, Size} +%% Size = integer() +%% +%% Description: Reports progress to the reporting process that calls the +%% user defined callback function. +%%-------------------------------------------------------------------------- +-type report() :: {'local_file', string()} | {'remote_file', string()} + | {'transfer_size', non_neg_integer()}. +-spec report(pid(), report()) -> 'ok'. +report(Pid, Report) -> + Pid ! {progress_report, Report}, + ok. + +%%-------------------------------------------------------------------------- +%% stop(Pid) -> ok +%% Pid = pid() +%% +%% Description: +%%-------------------------------------------------------------------------- +-spec stop(pid()) -> 'ok'. +stop(Pid) -> + Pid ! stop, + ok. + +%%%========================================================================= +%%% Internal functions +%%%========================================================================= +init(Options) -> + loop(progress(Options)). + +loop(Progress) -> + receive + {progress_report, Report} -> + NewProgress = report_progress(Report, Progress), + loop(NewProgress); + stop -> + ok + end. + +progress({CBModule, CBFunction, InitProgressTerm}) when is_atom(CBModule), + is_atom(CBFunction) -> + #progress{cb_module = CBModule, + cb_function = CBFunction, + init_progress_term = InitProgressTerm, + current_progress_term = InitProgressTerm}. + +report_progress({local_file, File}, Progress) -> + {ok, FileInfo} = file:read_file_info(File), + report_progress({file_size, FileInfo#file_info.size}, + Progress#progress{file = File}); + +report_progress({remote_file, File}, Progress) -> + report_progress({file_size, unknown}, Progress#progress{file = File}); + +report_progress(Size, #progress{file = File, + cb_module = CBModule, + cb_function = CBFunction, + current_progress_term = Term, + init_progress_term = InitTerm} = Progress) -> + + NewProgressTerm = CBModule:CBFunction(Term, File, Size), + + case Size of + {transfer_size, 0} -> + %% Transfer is compleat reset initial values + Progress#progress{current_progress_term = InitTerm, + file = undefined}; + _ -> + Progress#progress{current_progress_term = NewProgressTerm} + end. diff --git a/lib/ftp/src/ftp_response.erl b/lib/ftp/src/ftp_response.erl new file mode 100644 index 0000000000..8d00153ba8 --- /dev/null +++ b/lib/ftp/src/ftp_response.erl @@ -0,0 +1,203 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2005-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% +%% Description: This module impements handling of ftp server responses. + +-module(ftp_response). + +%% Internal API +-export([parse_lines/3, interpret/1, error_string/1]). + +-include("ftp_internal.hrl"). + +%% First group of reply code digits +-define(POS_PREL, 1). +-define(POS_COMPL, 2). +-define(POS_INTERM, 3). +-define(TRANS_NEG_COMPL, 4). +-define(PERM_NEG_COMPL, 5). +%% Second group of reply code digits +-define(SYNTAX,0). +-define(INFORMATION,1). +-define(CONNECTION,2). +-define(AUTH_ACC,3). +-define(UNSPEC,4). +-define(FILE_SYSTEM,5). + +%%%========================================================================= +%%% INTERNAL API +%%%========================================================================= + +%%-------------------------------------------------------------------------- +%% parse_lines(Data, AccLines, StatusCode) -> {ok, Lines} | +%% {continue, {Data, +%% AccLines, StatusCode}} +%% +%% Data = binary() - data recived on the control connection from the +%% ftp-server. +%% AccLines = [string()] +%% StatusCode = start | {byte(), byte(), byte()} | finish - +%% Indicates where in the parsing process we are. +%% start - (looking for the status code of the message) +%% {byte(), byte(), byte()} - status code found, now +%% looking for the last line indication. +%% finish - now on the last line. +%% Description: Parses a ftp control response message. +%% "A reply is defined to contain the 3-digit code, followed by Space +%% <SP>, followed by one line of text (where some maximum line length +%% has been specified), and terminated by the Telnet end-of-line +%% code (CRLF), or a so called multilined reply for example: +%% +%% 123-First line +%% Second line +%% 234 A line beginning with numbers +%% 123 The last line +%% +%% The user-process then simply needs to search for the second +%% occurrence of the same reply code, followed by <SP> (Space), at +%% the beginning of a line, and ignore all intermediary lines. If +%% an intermediary line begins with a 3-digit number, the Server +%% will pad the front to avoid confusion. +%%-------------------------------------------------------------------------- + +%% Make sure we received the first 4 bytes so we know how to parse +%% the FTP server response e.i. is the response composed of one +%% or multiple lines. +parse_lines(Bin, Lines, start) when size(Bin) < 4 -> + {continue, {Bin, Lines, start}}; +%% Multiple lines exist +parse_lines(<<C1, C2, C3, $-, Rest/binary>>, Lines, start) -> + parse_lines(Rest, [$-, C3, C2, C1 | Lines], {C1, C2, C3}); +%% Only one line exists +parse_lines(<<C1, C2, C3, ?WHITE_SPACE, Bin/binary>>, Lines, start) -> + parse_lines(Bin, [?WHITE_SPACE, C3, C2, C1 | Lines], finish); + +%% Last line found +parse_lines(<<?CR, ?LF, C1, C2, C3, ?WHITE_SPACE, Rest/binary>>, Lines, {C1, C2, C3}) -> + parse_lines(Rest, [?WHITE_SPACE, C3, C2, C1, ?LF, ?CR | Lines], finish); +%% Potential end found wait for more data +parse_lines(<<?CR, ?LF, C1, C2, C3>> = Bin, Lines, {C1, C2, C3}) -> + {continue, {Bin, Lines, {C1, C2, C3}}}; +%% Intermidate line begining with status code +parse_lines(<<?CR, ?LF, C1, C2, C3, Rest/binary>>, Lines, {C1, C2, C3}) -> + parse_lines(Rest, [C3, C2, C1, ?LF, ?CR | Lines], {C1, C2, C3}); + +%% Potential last line wait for more data +parse_lines(<<?CR, ?LF, C1, C2>> = Data, Lines, {C1, C2, _} = StatusCode) -> + {continue, {Data, Lines, StatusCode}}; +parse_lines(<<?CR, ?LF, C1>> = Data, Lines, {C1, _, _} = StatusCode) -> + {continue, {Data, Lines, StatusCode}}; +parse_lines(<<?CR, ?LF>> = Data, Lines, {_,_,_} = StatusCode) -> + {continue, {Data, Lines, StatusCode}}; +parse_lines(<<?LF>> = Data, Lines, {_,_,_} = StatusCode) -> + {continue, {Data, Lines, StatusCode}}; +parse_lines(<<>> = Data, Lines, {_,_,_} = StatusCode) -> + {continue, {Data, Lines, StatusCode}}; +%% Part of the multiple lines +parse_lines(<<Octet, Rest/binary>>, Lines, {_,_, _} = StatusCode) -> + parse_lines(Rest, [Octet | Lines], StatusCode); + +%% End of FTP server response found +parse_lines(<<?CR, ?LF>>, Lines, finish) -> + {ok, lists:reverse([?LF, ?CR | Lines]), <<>>}; +parse_lines(<<?CR, ?LF, Rest/binary>>, Lines, finish) -> + {ok, lists:reverse([?LF, ?CR | Lines]), Rest}; + +%% Potential end found wait for more data +parse_lines(<<?CR>> = Data, Lines, finish) -> + {continue, {Data, Lines, finish}}; +parse_lines(<<>> = Data, Lines, finish) -> + {continue, {Data, Lines, finish}}; +%% Part of last line +parse_lines(<<Octet, Rest/binary>>, Lines, finish) -> + parse_lines(Rest, [Octet | Lines], finish). + +%%-------------------------------------------------------------------------- +%% interpret(Lines) -> {Status, Text} +%% Lines = [byte(), byte(), byte() | Text] - ftp server response as +%% returned by parse_lines/3 +%% Stauts = atom() (see interpret_status/3) +%% Text = [string()] +%% +%% Description: Create nicer data to match on. +%%-------------------------------------------------------------------------- +interpret([Didgit1, Didgit2, Didgit3 | Data]) -> + Code1 = Didgit1 - $0, + Code2 = Didgit2 - $0, + Code3 = Didgit3 - $0, + {interpret_status(Code1, Code2, Code3), Data}. + +%%-------------------------------------------------------------------------- +%% error_string(Error) -> string() +%% Error = {error, term()} | term() +%% +%% Description: Translates error codes into strings intended for +%% human interpretation. +%%-------------------------------------------------------------------------- +error_string({error, Reason}) -> + error_string(Reason); + +error_string(echunk) -> "Synchronisation error during chunk sending."; +error_string(eclosed) -> "Session has been closed."; +error_string(econn) -> "Connection to remote server prematurely closed."; +error_string(eexists) ->"File or directory already exists."; +error_string(ehost) -> "Host not found, FTP server not found, " + "or connection rejected."; +error_string(elogin) -> "User not logged in."; +error_string(enotbinary) -> "Term is not a binary."; +error_string(epath) -> "No such file or directory, already exists, " + "or permission denied."; +error_string(etype) -> "No such type."; +error_string(euser) -> "User name or password not valid."; +error_string(etnospc) -> "Insufficient storage space in system."; +error_string(enofile) -> "No files found or file unavailable"; +error_string(epnospc) -> "Exceeded storage allocation " + "(for current directory or dataset)."; +error_string(efnamena) -> "File name not allowed."; +error_string(Reason) -> + lists:flatten(io_lib:format("Unknown error: ~w", [Reason])). + +%%%======================================================================== +%%% Internal functions +%%%======================================================================== + +%% Positive Preleminary Reply +interpret_status(?POS_PREL,_,_) -> pos_prel; +%%FIXME ??? 3??? interpret_status(?POS_COMPL, ?AUTH_ACC, 3) -> tls_upgrade; +interpret_status(?POS_COMPL, ?AUTH_ACC, 4) -> tls_upgrade; +%% Positive Completion Reply +interpret_status(?POS_COMPL,_,_) -> pos_compl; +%% Positive Intermediate Reply nedd account +interpret_status(?POS_INTERM,?AUTH_ACC,2) -> pos_interm_acct; +%% Positive Intermediate Reply +interpret_status(?POS_INTERM,_,_) -> pos_interm; +%% No files found or file not available +interpret_status(?TRANS_NEG_COMPL,?FILE_SYSTEM,0) -> enofile; +%% No storage area no action taken +interpret_status(?TRANS_NEG_COMPL,?FILE_SYSTEM,2) -> etnospc; +%% Temporary Error, no action taken +interpret_status(?TRANS_NEG_COMPL,_,_) -> trans_neg_compl; +%% Permanent disk space error, the user shall not try again +interpret_status(?PERM_NEG_COMPL,?FILE_SYSTEM,0) -> epath; +interpret_status(?PERM_NEG_COMPL,?FILE_SYSTEM,2) -> epnospc; +interpret_status(?PERM_NEG_COMPL,?FILE_SYSTEM,3) -> efnamena; +interpret_status(?PERM_NEG_COMPL,?AUTH_ACC,0) -> elogin; +interpret_status(?PERM_NEG_COMPL,_,_) -> perm_neg_compl. + diff --git a/lib/ftp/src/ftp_sup.erl b/lib/ftp/src/ftp_sup.erl new file mode 100644 index 0000000000..f30046802f --- /dev/null +++ b/lib/ftp/src/ftp_sup.erl @@ -0,0 +1,68 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2002-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% + +%%%------------------------------------------------------------------- +%% @doc ftp top level supervisor. +%% @end +%%%------------------------------------------------------------------- + +-module(ftp_sup). + +-behaviour(supervisor). + +%% API +-export([start_child/1, start_link/0]). + +%% Supervisor callbacks +-export([init/1]). + +-define(SERVER, ?MODULE). + +%%==================================================================== +%% API functions +%%==================================================================== + +start_link() -> + supervisor:start_link({local, ?SERVER}, ?MODULE, []). + +start_child(Args) -> + supervisor:start_child(?MODULE, Args). + +%%==================================================================== +%% Supervisor callbacks +%%==================================================================== +init(_) -> + SupFlags = #{strategy => simple_one_for_one, + intensity => 0, + period => 3600}, + {ok, {SupFlags, child_specs()}}. + + +%%==================================================================== +%% Internal functions +%%==================================================================== +child_specs() -> + [#{id => undefined, + start => {ftp, start_link, []}, + restart => temporary, + shutdown => 4000, + type => worker, + modules => [ftp]}]. diff --git a/lib/ftp/test/Makefile b/lib/ftp/test/Makefile new file mode 100644 index 0000000000..147f8e5dd6 --- /dev/null +++ b/lib/ftp/test/Makefile @@ -0,0 +1,251 @@ +# +# %CopyrightBegin% +# +# Copyright Ericsson AB 1997-2018. All Rights Reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# %CopyrightEnd% +# +# +# For an outline of how this all_SUITE_data stuff works, see the +# make file ../../ssl/test/Makefile. +# +include $(ERL_TOP)/make/target.mk +include $(ERL_TOP)/make/$(TARGET)/otp.mk + +# ---------------------------------------------------- +# Application version +# ---------------------------------------------------- +include ../vsn.mk +VSN = $(FTP_VSN) + + +# ---------------------------------------------------- +# Release directory specification +# ---------------------------------------------------- +RELSYSDIR = $(RELEASE_PATH)/lib/$(APPLICATION)-$(VSN) + + +# ---------------------------------------------------- +# Target Specs +# ---------------------------------------------------- +INCLUDES = -I. \ + -I$(ERL_TOP)/lib/ftp/src + +CP = cp + +ifeq ($(TESTROOT_DIR),) +TESTROOT_DIR = /ldisk/tests/$(USER)/ftp +endif + +ifeq ($(FTP_DATA_DIR),) +FTP_DATA_DIR = $(TESTROOT_DIR)/data_dir +endif + +ifeq ($(FTP_PRIV_DIR),) +FTP_PRIV_DIR = $(TESTROOT_DIR)/priv_dir +endif + +FTP_FLAGS = -Dftp__data_dir='"$(FTP_DATA_DIR)"' \ + -Dftp_priv_dir='"$(FTP_PRIV_DIR)"' + + +### +### test suite debug flags +### +ifeq ($(FTP_DEBUG_CLIENT),) + FTP_DEBUG_CLIENT = y +endif + +ifeq ($(FTP_DEBUG_CLIENT),) + FTP_FLAGS += -Dftp_debug_client +endif + +ifeq ($(FTP_TRACE_CLIENT),) + FTP_DEBUG_CLIENT = y +endif + +ifeq ($(FTP_TRACE_CLIENT),y) + FTP_FLAGS += -Dftp_trace_client +endif + +ifneq ($(FTP_DEBUG),) + FTP_DEBUG = s +endif + +ifeq ($(FTP_DEBUG),l) + FTP_FLAGS += -Dftp_log +endif + +ifeq ($(FTP_DEBUG),d) + FTP_FLAGS += -Dftp_debug -Dftp_log +endif + + +FTP_FLAGS += -pa ../ftp/ebin + +FTP_ROOT = ../ftp + +MODULES = \ + erl_make_certs \ + ftp_SUITE \ + ftp_format_SUITE \ + ftp_test_lib + + +EBIN = . + +HRL_FILES = \ + ftp_internal.hrl + +ERL_FILES = $(MODULES:%=%.erl) + +SOURCE = $(ERL_FILES) $(HRL_FILES) + +TARGET_FILES = $(MODULES:%=$(EBIN)/%.$(EMULATOR)) + +FTP_SPECS = ftp.spec ftp_bench.spec +COVER_FILE = ftp.cover +FTP_FILES = ftp.config $(FTP_SPECS) + + +FTP_DATADIRS = ftp_SUITE_data + +DATADIRS = $(FTP_DATADIRS) + +EMAKEFILE = Emakefile +MAKE_EMAKE = $(wildcard $(ERL_TOP)/make/make_emakefile) + +ifeq ($(MAKE_EMAKE),) +BUILDTARGET = $(TARGET_FILES) +RELTEST_FILES = $(COVER_FILE) $(FTP_SPECS) $(SOURCE) +else +BUILDTARGET = emakebuild +RELTEST_FILES = $(EMAKEFILE) $(COVER_FILE) $(FTP_SPECS) $(SOURCE) +endif + + +# ---------------------------------------------------- +# Release directory specification +# ---------------------------------------------------- + +RELTESTSYSDIR = "$(RELEASE_PATH)/ftp_test" +RELTESTSYSALLDATADIR = $(RELTESTSYSDIR)/all_SUITE_data +RELTESTSYSBINDIR = $(RELTESTSYSALLDATADIR)/bin + + +# ---------------------------------------------------- +# FLAGS +# The path to the test_server ebin dir is needed when +# running the target "targets". +# ---------------------------------------------------- +ERL_COMPILE_FLAGS += \ + $(INCLUDES) \ + $(FTP_FLAGS) + +# ---------------------------------------------------- +# Targets +# erl -sname kalle -pa ../ebin +# If you intend to run the test suite locally (private), then +# there is some requirements: +# 1) FTP_PRIV_DIR must be created +# ---------------------------------------------------- + +tests debug opt: $(BUILDTARGET) + +targets: $(TARGET_FILES) + +.PHONY: emakebuild + +emakebuild: $(EMAKEFILE) + +$(EMAKEFILE): + $(MAKE_EMAKE) $(ERL_COMPILE_FLAGS) -o$(EBIN) '*_SUITE_make' | grep -v Warning > $(EMAKEFILE) + $(MAKE_EMAKE) $(ERL_COMPILE_FLAGS) -o$(EBIN) $(MODULES) | grep -v Warning >> $(EMAKEFILE) + +clean: + rm -f $(EMAKEFILE) + rm -f $(TARGET_FILES) + rm -f core *~ + +docs: + + +# ---------------------------------------------------- +# Release Target +# ---------------------------------------------------- +include $(ERL_TOP)/make/otp_release_targets.mk + +release_spec: opt + $(INSTALL_DIR) "$(RELSYSDIR)/test" + $(INSTALL_DATA) $(HRL_FILES) $(ERL_FILES) "$(RELSYSDIR)/test" + $(INSTALL_DATA) $(FTP_FILES) "$(RELSYSDIR)/test" + @for d in $(DATADIRS); do \ + echo "installing data dir $$d"; \ + if test -f $$d/TAR.exclude; then \ + echo $$d/TAR.exclude2 > $$d/TAR.exclude2; \ + cat $$d/TAR.exclude >> $$d/TAR.exclude2; \ + find $$d -name '*.contrib*' >> $$d/TAR.exclude2; \ + find $$d -name '*.keep*' >> $$d/TAR.exclude2; \ + find $$d -name '*.mkelem*' >> $$d/TAR.exclude2; \ + find $$d -name '*~' >> $$d/TAR.exclude2; \ + find $$d -name 'erl_crash.dump' >> $$d/TAR.exclude2; \ + find $$d -name 'core' >> $$d/TAR.exclude2; \ + find $$d -name '.cmake.state' >> $$d/TAR.exclude2; \ + tar cfX - $$d/TAR.exclude2 $$d | (cd "$(RELSYSDIR)/test"; tar xf -); \ + else \ + tar cf - $$d | (cd "$(RELSYSDIR)/test"; tar xf -); \ + fi; \ + done + +release_tests_spec: opt + $(INSTALL_DIR) $(RELTESTSYSDIR) + $(INSTALL_DATA) $(RELTEST_FILES) $(RELTESTSYSDIR) + chmod -R u+w $(RELTESTSYSDIR) + tar chf - $(DATADIRS) | (cd $(RELTESTSYSDIR); tar xf -) + $(INSTALL_DIR) $(RELTESTSYSALLDATADIR) + $(INSTALL_DIR) $(RELTESTSYSBINDIR) + chmod -R +x $(RELTESTSYSBINDIR) + $(INSTALL_DIR) $(RELTESTSYSALLDATADIR)/win32/lib + +release_docs_spec: + +info: + @echo "MAKE_EMAKE = $(MAKE_EMAKE)" + @echo "EMAKEFILE = $(EMAKEFILE)" + @echo "BUILDTARGET = $(BUILDTARGET)" + @echo "" + @echo "MODULES = $(MODULES)" + @echo "ERL_FILES = $(ERL_FILES)" + @echo "SOURCE = $(SOURCE)" + @echo "TARGET_FILES = $(TARGET_FILES)" + @echo "" + @echo "FTP_SPECS = $(FTP_SPECS)" + @echo "FTP_FILES = $(FTP_FILES)" + @echo "" + @echo "RELEASE_PATH = "$(RELEASE_PATH)"" + @echo "RELSYSDIR = "$(RELSYSDIR)"" + @echo "RELTESTSYSDIR = $(RELTESTSYSDIR)" + @echo "RELTESTSYSALLDATADIR = $(RELTESTSYSALLDATADIR)" + @echo "RELTESTSYSBINDIR = $(RELTESTSYSBINDIR)" + @echo "" + @echo "DATADIRS = $(DATADIRS)" + @echo "REL_DATADIRS = $(REL_DATADIRS)" + @echo "" + @echo "FTP_DATA_DIR = $(FTP_DATA_DIR)" + @echo "FTP_PRIV_DIR = $(FTP_PRIV_DIR)" + @echo "FTP_ROOT = $(FTP_ROOT)" + @echo "FTP_FLAGS = $(FTP_FLAGS)" + + diff --git a/lib/ftp/test/erl_make_certs.erl b/lib/ftp/test/erl_make_certs.erl new file mode 100644 index 0000000000..e10ecf01f9 --- /dev/null +++ b/lib/ftp/test/erl_make_certs.erl @@ -0,0 +1,475 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2011-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% + +%% Create test certificates + +-module(erl_make_certs). +-include_lib("public_key/include/public_key.hrl"). + +-export([make_cert/1, gen_rsa/1, verify_signature/3, write_pem/3]). +-compile(export_all). + +%%-------------------------------------------------------------------- +%% @doc Create and return a der encoded certificate +%% Option Default +%% ------------------------------------------------------- +%% digest sha1 +%% validity {date(), date() + week()} +%% version 3 +%% subject [] list of the following content +%% {name, Name} +%% {email, Email} +%% {city, City} +%% {state, State} +%% {org, Org} +%% {org_unit, OrgUnit} +%% {country, Country} +%% {serial, Serial} +%% {title, Title} +%% {dnQualifer, DnQ} +%% issuer = {Issuer, IssuerKey} true (i.e. a ca cert is created) +%% (obs IssuerKey migth be {Key, Password} +%% key = KeyFile|KeyBin|rsa|dsa|ec Subject PublicKey rsa, dsa or ec generates key +%% +%% +%% (OBS: The generated keys are for testing only) +%% @spec ([{::atom(), ::term()}]) -> {Cert::binary(), Key::binary()} +%% @end +%%-------------------------------------------------------------------- + +make_cert(Opts) -> + SubjectPrivateKey = get_key(Opts), + {TBSCert, IssuerKey} = make_tbs(SubjectPrivateKey, Opts), + Cert = public_key:pkix_sign(TBSCert, IssuerKey), + true = verify_signature(Cert, IssuerKey, undef), %% verify that the keys where ok + {Cert, encode_key(SubjectPrivateKey)}. + +%%-------------------------------------------------------------------- +%% @doc Writes pem files in Dir with FileName ++ ".pem" and FileName ++ "_key.pem" +%% @spec (::string(), ::string(), {Cert,Key}) -> ok +%% @end +%%-------------------------------------------------------------------- +write_pem(Dir, FileName, {Cert, Key = {_,_,not_encrypted}}) when is_binary(Cert) -> + ok = der_to_pem(filename:join(Dir, FileName ++ ".pem"), + [{'Certificate', Cert, not_encrypted}]), + ok = der_to_pem(filename:join(Dir, FileName ++ "_key.pem"), [Key]). + +%%-------------------------------------------------------------------- +%% @doc Creates a rsa key (OBS: for testing only) +%% the size are in bytes +%% @spec (::integer()) -> {::atom(), ::binary(), ::opaque()} +%% @end +%%-------------------------------------------------------------------- +gen_rsa(Size) when is_integer(Size) -> + Key = gen_rsa2(Size), + {Key, encode_key(Key)}. + +%%-------------------------------------------------------------------- +%% @doc Creates a dsa key (OBS: for testing only) +%% the sizes are in bytes +%% @spec (::integer()) -> {::atom(), ::binary(), ::opaque()} +%% @end +%%-------------------------------------------------------------------- +gen_dsa(LSize,NSize) when is_integer(LSize), is_integer(NSize) -> + Key = gen_dsa2(LSize, NSize), + {Key, encode_key(Key)}. + +%%-------------------------------------------------------------------- +%% @doc Creates a ec key (OBS: for testing only) +%% the sizes are in bytes +%% @spec (::integer()) -> {::atom(), ::binary(), ::opaque()} +%% @end +%%-------------------------------------------------------------------- +gen_ec(Curve) when is_atom(Curve) -> + Key = gen_ec2(Curve), + {Key, encode_key(Key)}. + +%%-------------------------------------------------------------------- +%% @doc Verifies cert signatures +%% @spec (::binary(), ::tuple()) -> ::boolean() +%% @end +%%-------------------------------------------------------------------- +verify_signature(DerEncodedCert, DerKey, _KeyParams) -> + Key = decode_key(DerKey), + case Key of + #'RSAPrivateKey'{modulus=Mod, publicExponent=Exp} -> + public_key:pkix_verify(DerEncodedCert, + #'RSAPublicKey'{modulus=Mod, publicExponent=Exp}); + #'DSAPrivateKey'{p=P, q=Q, g=G, y=Y} -> + public_key:pkix_verify(DerEncodedCert, {Y, #'Dss-Parms'{p=P, q=Q, g=G}}); + #'ECPrivateKey'{version = _Version, privateKey = _PrivKey, + parameters = Params, publicKey = {0, PubKey}} -> + public_key:pkix_verify(DerEncodedCert, {#'ECPoint'{point = PubKey}, Params}) + end. + +%%%%%%%%%%%%%%%%%%%%%%%%% Implementation %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +get_key(Opts) -> + case proplists:get_value(key, Opts) of + undefined -> make_key(rsa, Opts); + rsa -> make_key(rsa, Opts); + dsa -> make_key(dsa, Opts); + ec -> make_key(ec, Opts); + Key -> + Password = proplists:get_value(password, Opts, no_passwd), + decode_key(Key, Password) + end. + +decode_key({Key, Pw}) -> + decode_key(Key, Pw); +decode_key(Key) -> + decode_key(Key, no_passwd). + + +decode_key(#'RSAPublicKey'{} = Key,_) -> + Key; +decode_key(#'RSAPrivateKey'{} = Key,_) -> + Key; +decode_key(#'DSAPrivateKey'{} = Key,_) -> + Key; +decode_key(#'ECPrivateKey'{} = Key,_) -> + Key; +decode_key(PemEntry = {_,_,_}, Pw) -> + public_key:pem_entry_decode(PemEntry, Pw); +decode_key(PemBin, Pw) -> + [KeyInfo] = public_key:pem_decode(PemBin), + decode_key(KeyInfo, Pw). + +encode_key(Key = #'RSAPrivateKey'{}) -> + {ok, Der} = 'OTP-PUB-KEY':encode('RSAPrivateKey', Key), + {'RSAPrivateKey', Der, not_encrypted}; +encode_key(Key = #'DSAPrivateKey'{}) -> + {ok, Der} = 'OTP-PUB-KEY':encode('DSAPrivateKey', Key), + {'DSAPrivateKey', Der, not_encrypted}; +encode_key(Key = #'ECPrivateKey'{}) -> + {ok, Der} = 'OTP-PUB-KEY':encode('ECPrivateKey', Key), + {'ECPrivateKey', Der, not_encrypted}. + +make_tbs(SubjectKey, Opts) -> + Version = list_to_atom("v"++integer_to_list(proplists:get_value(version, Opts, 3))), + + IssuerProp = proplists:get_value(issuer, Opts, true), + {Issuer, IssuerKey} = issuer(IssuerProp, Opts, SubjectKey), + + {Algo, Parameters} = sign_algorithm(IssuerKey, Opts), + + SignAlgo = #'SignatureAlgorithm'{algorithm = Algo, + parameters = Parameters}, + Subject = case IssuerProp of + true -> %% Is a Root Ca + Issuer; + _ -> + subject(proplists:get_value(subject, Opts),false) + end, + + {#'OTPTBSCertificate'{serialNumber = trunc(random:uniform()*100000000)*10000 + 1, + signature = SignAlgo, + issuer = Issuer, + validity = validity(Opts), + subject = Subject, + subjectPublicKeyInfo = publickey(SubjectKey), + version = Version, + extensions = extensions(Opts) + }, IssuerKey}. + +issuer(true, Opts, SubjectKey) -> + %% Self signed + {subject(proplists:get_value(subject, Opts), true), SubjectKey}; +issuer({Issuer, IssuerKey}, _Opts, _SubjectKey) when is_binary(Issuer) -> + {issuer_der(Issuer), decode_key(IssuerKey)}; +issuer({File, IssuerKey}, _Opts, _SubjectKey) when is_list(File) -> + {ok, [{cert, Cert, _}|_]} = pem_to_der(File), + {issuer_der(Cert), decode_key(IssuerKey)}. + +issuer_der(Issuer) -> + Decoded = public_key:pkix_decode_cert(Issuer, otp), + #'OTPCertificate'{tbsCertificate=Tbs} = Decoded, + #'OTPTBSCertificate'{subject=Subject} = Tbs, + Subject. + +subject(undefined, IsRootCA) -> + User = if IsRootCA -> "RootCA"; true -> os:getenv("USER", "test_user") end, + Opts = [{email, User ++ "@erlang.org"}, + {name, User}, + {city, "Stockholm"}, + {country, "SE"}, + {org, "erlang"}, + {org_unit, "testing dep"}], + subject(Opts); +subject(Opts, _) -> + subject(Opts). + +subject(SubjectOpts) when is_list(SubjectOpts) -> + Encode = fun(Opt) -> + {Type,Value} = subject_enc(Opt), + [#'AttributeTypeAndValue'{type=Type, value=Value}] + end, + {rdnSequence, [Encode(Opt) || Opt <- SubjectOpts]}. + +%% Fill in the blanks +subject_enc({name, Name}) -> {?'id-at-commonName', {printableString, Name}}; +subject_enc({email, Email}) -> {?'id-emailAddress', Email}; +subject_enc({city, City}) -> {?'id-at-localityName', {printableString, City}}; +subject_enc({state, State}) -> {?'id-at-stateOrProvinceName', {printableString, State}}; +subject_enc({org, Org}) -> {?'id-at-organizationName', {printableString, Org}}; +subject_enc({org_unit, OrgUnit}) -> {?'id-at-organizationalUnitName', {printableString, OrgUnit}}; +subject_enc({country, Country}) -> {?'id-at-countryName', Country}; +subject_enc({serial, Serial}) -> {?'id-at-serialNumber', Serial}; +subject_enc({title, Title}) -> {?'id-at-title', {printableString, Title}}; +subject_enc({dnQualifer, DnQ}) -> {?'id-at-dnQualifier', DnQ}; +subject_enc(Other) -> Other. + + +extensions(Opts) -> + case proplists:get_value(extensions, Opts, []) of + false -> + asn1_NOVALUE; + Exts -> + lists:flatten([extension(Ext) || Ext <- default_extensions(Exts)]) + end. + +default_extensions(Exts) -> + Def = [{key_usage,undefined}, + {subject_altname, undefined}, + {issuer_altname, undefined}, + {basic_constraints, default}, + {name_constraints, undefined}, + {policy_constraints, undefined}, + {ext_key_usage, undefined}, + {inhibit_any, undefined}, + {auth_key_id, undefined}, + {subject_key_id, undefined}, + {policy_mapping, undefined}], + Filter = fun({Key, _}, D) -> lists:keydelete(Key, 1, D) end, + Exts ++ lists:foldl(Filter, Def, Exts). + +extension({_, undefined}) -> []; +extension({basic_constraints, Data}) -> + case Data of + default -> + #'Extension'{extnID = ?'id-ce-basicConstraints', + extnValue = #'BasicConstraints'{cA=true}, + critical=true}; + false -> + []; + Len when is_integer(Len) -> + #'Extension'{extnID = ?'id-ce-basicConstraints', + extnValue = #'BasicConstraints'{cA=true, pathLenConstraint=Len}, + critical=true}; + _ -> + #'Extension'{extnID = ?'id-ce-basicConstraints', + extnValue = Data} + end; +extension({Id, Data, Critical}) -> + #'Extension'{extnID = Id, extnValue = Data, critical = Critical}. + + +publickey(#'RSAPrivateKey'{modulus=N, publicExponent=E}) -> + Public = #'RSAPublicKey'{modulus=N, publicExponent=E}, + Algo = #'PublicKeyAlgorithm'{algorithm= ?rsaEncryption, parameters='NULL'}, + #'OTPSubjectPublicKeyInfo'{algorithm = Algo, + subjectPublicKey = Public}; +publickey(#'DSAPrivateKey'{p=P, q=Q, g=G, y=Y}) -> + Algo = #'PublicKeyAlgorithm'{algorithm= ?'id-dsa', + parameters={params, #'Dss-Parms'{p=P, q=Q, g=G}}}, + #'OTPSubjectPublicKeyInfo'{algorithm = Algo, subjectPublicKey = Y}; +publickey(#'ECPrivateKey'{version = _Version, + privateKey = _PrivKey, + parameters = Params, + publicKey = {0, PubKey}}) -> + Algo = #'PublicKeyAlgorithm'{algorithm= ?'id-ecPublicKey', parameters=Params}, + #'OTPSubjectPublicKeyInfo'{algorithm = Algo, + subjectPublicKey = #'ECPoint'{point = PubKey}}. + +validity(Opts) -> + DefFrom0 = calendar:gregorian_days_to_date(calendar:date_to_gregorian_days(date())-1), + DefTo0 = calendar:gregorian_days_to_date(calendar:date_to_gregorian_days(date())+7), + {DefFrom, DefTo} = proplists:get_value(validity, Opts, {DefFrom0, DefTo0}), + Format = fun({Y,M,D}) -> lists:flatten(io_lib:format("~w~2..0w~2..0w000000Z",[Y,M,D])) end, + #'Validity'{notBefore={generalTime, Format(DefFrom)}, + notAfter ={generalTime, Format(DefTo)}}. + +sign_algorithm(#'RSAPrivateKey'{}, Opts) -> + Type = case proplists:get_value(digest, Opts, sha1) of + sha1 -> ?'sha1WithRSAEncryption'; + sha512 -> ?'sha512WithRSAEncryption'; + sha384 -> ?'sha384WithRSAEncryption'; + sha256 -> ?'sha256WithRSAEncryption'; + md5 -> ?'md5WithRSAEncryption'; + md2 -> ?'md2WithRSAEncryption' + end, + {Type, 'NULL'}; +sign_algorithm(#'DSAPrivateKey'{p=P, q=Q, g=G}, _Opts) -> + {?'id-dsa-with-sha1', {params,#'Dss-Parms'{p=P, q=Q, g=G}}}; +sign_algorithm(#'ECPrivateKey'{}, Opts) -> + Type = case proplists:get_value(digest, Opts, sha1) of + sha1 -> ?'ecdsa-with-SHA1'; + sha512 -> ?'ecdsa-with-SHA512'; + sha384 -> ?'ecdsa-with-SHA384'; + sha256 -> ?'ecdsa-with-SHA256' + end, + {Type, 'NULL'}. + +make_key(rsa, _Opts) -> + %% (OBS: for testing only) + gen_rsa2(64); +make_key(dsa, _Opts) -> + gen_dsa2(128, 20); %% Bytes i.e. {1024, 160} +make_key(ec, _Opts) -> + %% (OBS: for testing only) + gen_ec2(secp256k1). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% RSA key generation (OBS: for testing only) +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +-define(SMALL_PRIMES, [65537,97,89,83,79,73,71,67,61,59,53, + 47,43,41,37,31,29,23,19,17,13,11,7,5,3]). + +gen_rsa2(Size) -> + P = prime(Size), + Q = prime(Size), + N = P*Q, + Tot = (P - 1) * (Q - 1), + [E|_] = lists:dropwhile(fun(Candidate) -> (Tot rem Candidate) == 0 end, ?SMALL_PRIMES), + {D1,D2} = extended_gcd(E, Tot), + D = erlang:max(D1,D2), + case D < E of + true -> + gen_rsa2(Size); + false -> + {Co1,Co2} = extended_gcd(Q, P), + Co = erlang:max(Co1,Co2), + #'RSAPrivateKey'{version = 'two-prime', + modulus = N, + publicExponent = E, + privateExponent = D, + prime1 = P, + prime2 = Q, + exponent1 = D rem (P-1), + exponent2 = D rem (Q-1), + coefficient = Co + } + end. + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% DSA key generation (OBS: for testing only) +%% See http://en.wikipedia.org/wiki/Digital_Signature_Algorithm +%% and the fips_186-3.pdf +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +gen_dsa2(LSize, NSize) -> + Q = prime(NSize), %% Choose N-bit prime Q + X0 = prime(LSize), + P0 = prime((LSize div 2) +1), + + %% Choose L-bit prime modulus P such that p-1 is a multiple of q. + case dsa_search(X0 div (2*Q*P0), P0, Q, 1000) of + error -> + gen_dsa2(LSize, NSize); + P -> + G = crypto:mod_pow(2, (P-1) div Q, P), % Choose G a number whose multiplicative order modulo p is q. + %% such that This may be done by setting g = h^(p-1)/q mod p, commonly h=2 is used. + + X = prime(20), %% Choose x by some random method, where 0 < x < q. + Y = crypto:mod_pow(G, X, P), %% Calculate y = g^x mod p. + + #'DSAPrivateKey'{version=0, p = P, q = Q, + g = crypto:bytes_to_integer(G), y = crypto:bytes_to_integer(Y), x = X} + end. + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% EC key generation (OBS: for testing only) +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +gen_ec2(CurveId) -> + {PubKey, PrivKey} = crypto:generate_key(ecdh, CurveId), + + #'ECPrivateKey'{version = 1, + privateKey = binary_to_list(PrivKey), + parameters = {namedCurve, pubkey_cert_records:namedCurves(CurveId)}, + publicKey = {0, PubKey}}. + +%% See fips_186-3.pdf +dsa_search(T, P0, Q, Iter) when Iter > 0 -> + P = 2*T*Q*P0 + 1, + case is_prime(P, 50) of + true -> P; + false -> dsa_search(T+1, P0, Q, Iter-1) + end; +dsa_search(_,_,_,_) -> + error. + + +%%%%%%% Crypto Math %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +prime(ByteSize) -> + Rand = odd_rand(ByteSize), + prime_odd(Rand, 0). + +prime_odd(Rand, N) -> + case is_prime(Rand, 50) of + true -> + Rand; + false -> + prime_odd(Rand+2, N+1) + end. + +%% see http://en.wikipedia.org/wiki/Fermat_primality_test +is_prime(_, 0) -> true; +is_prime(Candidate, Test) -> + CoPrime = odd_rand(10000, Candidate), + Result = crypto:mod_pow(CoPrime, Candidate, Candidate) , + is_prime(CoPrime, crypto:bytes_to_integer(Result), Candidate, Test). + +is_prime(CoPrime, CoPrime, Candidate, Test) -> + is_prime(Candidate, Test-1); +is_prime(_,_,_,_) -> + false. + +odd_rand(Size) -> + Min = 1 bsl (Size*8-1), + Max = (1 bsl (Size*8))-1, + odd_rand(Min, Max). + +odd_rand(Min,Max) -> + Rand = crypto:rand_uniform(Min,Max), + case Rand rem 2 of + 0 -> + Rand + 1; + _ -> + Rand + end. + +extended_gcd(A, B) -> + case A rem B of + 0 -> + {0, 1}; + N -> + {X, Y} = extended_gcd(B, N), + {Y, X-Y*(A div B)} + end. + +pem_to_der(File) -> + {ok, PemBin} = file:read_file(File), + public_key:pem_decode(PemBin). + +der_to_pem(File, Entries) -> + PemBin = public_key:pem_encode(Entries), + file:write_file(File, PemBin). + diff --git a/lib/ftp/test/ftp.config b/lib/ftp/test/ftp.config new file mode 100644 index 0000000000..2600237da9 --- /dev/null +++ b/lib/ftp/test/ftp.config @@ -0,0 +1 @@ +[].
\ No newline at end of file diff --git a/lib/ftp/test/ftp.cover b/lib/ftp/test/ftp.cover new file mode 100644 index 0000000000..5b155991bc --- /dev/null +++ b/lib/ftp/test/ftp.cover @@ -0,0 +1,2 @@ +{incl_app,ftp,details}. + diff --git a/lib/ftp/test/ftp.spec b/lib/ftp/test/ftp.spec new file mode 100644 index 0000000000..faf1e532a8 --- /dev/null +++ b/lib/ftp/test/ftp.spec @@ -0,0 +1 @@ +{suites,"../ftp_test", all}. diff --git a/lib/ftp/test/ftp_SUITE.erl b/lib/ftp/test/ftp_SUITE.erl new file mode 100644 index 0000000000..0b070ee8cb --- /dev/null +++ b/lib/ftp/test/ftp_SUITE.erl @@ -0,0 +1,1274 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2004-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% +-module(ftp_SUITE). + +-include_lib("kernel/include/file.hrl"). +-include_lib("common_test/include/ct.hrl"). + +%% Note: This directive should only be used in test suites. +-compile(export_all). + +-define(FTP_USER, "anonymous"). +-define(FTP_PASS(Cmnt), (fun({ok,__H}) -> "ftp_SUITE_"++Cmnt++"@" ++ __H; + (_) -> "ftp_SUITE_"++Cmnt++"@localhost" + end)(inet:gethostname()) + ). + +-define(BAD_HOST, "badhostname"). +-define(BAD_USER, "baduser"). +-define(BAD_DIR, "baddirectory"). + +-record(progress, { + current = 0, + total + }). + +%%-------------------------------------------------------------------- +%% Common Test interface functions ----------------------------------- +%%-------------------------------------------------------------------- +suite() -> + [{timetrap,{seconds,20}}]. + +all() -> + [ + {group, ftp_passive}, + {group, ftp_active}, + {group, ftps_passive}, + {group, ftps_active}, + {group, ftp_sup}, + app, + appup, + error_ehost, + clean_shutdown + ]. + +groups() -> + [ + {ftp_passive, [], ftp_tests()}, + {ftp_active, [], ftp_tests()}, + {ftps_passive, [], ftp_tests()}, + {ftps_active, [], ftp_tests()}, + {ftp_sup, [], ftp_sup_tests()} + ]. + +ftp_tests()-> + [ + user, + bad_user, + pwd, + cd, + lcd, + ls, + nlist, + rename, + delete, + mkdir, + rmdir, + send, + send_3, + send_bin, + send_chunk, + append, + append_bin, + append_chunk, + recv, + recv_3, + recv_bin, + recv_bin_twice, + recv_chunk, + recv_chunk_twice, + recv_chunk_three_times, + recv_chunk_delay, + type, + quote, + error_elogin, + progress_report_send, + progress_report_recv, + not_owner, + unexpected_call, + unexpected_cast, + unexpected_bang + ]. + +ftp_sup_tests() -> + [ + start_ftp, + ftp_worker + ]. + +%%-------------------------------------------------------------------- + +%%% Config +%%% key meaning +%%% ................................................................ +%%% ftpservers list of servers to check if they are available +%%% The element is: +%%% {Name, % string(). The os command name +%%% Path, % string(). The os PATH syntax, e.g "/bin:/usr/bin" +%%% StartCommand, % fun()->{ok,start_result()} | {error,string()}. +%%% % The command to start the daemon with. +%%% ChkUp, % fun(start_result()) -> string(). Os command to check +%%% % if the server is running. [] if not running. +%%% % The string in string() is suitable for logging. +%%% StopCommand, % fun(start_result()) -> void(). The command to stop the daemon with. +%%% AugmentFun, % fun(config()) -> config() Adds two funs for transforming names of files +%%% % and directories to the form they are returned from this server +%%% ServerHost, % string(). Mostly "localhost" +%%% ServerPort % pos_integer() +%%% } +%%% + +-define(default_ftp_servers, + [{"vsftpd", + "/sbin:/usr/sbin:/usr/local/sbin", + fun(__CONF__, AbsName) -> + DataDir = proplists:get_value(data_dir,__CONF__), + ConfFile = filename:join(DataDir, "vsftpd.conf"), + PrivDir = proplists:get_value(priv_dir,__CONF__), + AnonRoot = PrivDir, + Cmd = [AbsName ++" "++filename:join(DataDir,"vsftpd.conf"), + " -oftpd_banner=erlang_otp_testing", + " -oanon_root=\"",AnonRoot,"\"", + " -orsa_cert_file=\"",filename:join(DataDir,"server-cert.pem"),"\"", + " -orsa_private_key_file=\"",filename:join(DataDir,"server-key.pem"),"\"" + ], + Result = os:cmd(Cmd), + ct:log("Config file:~n~s~n~nServer start command:~n ~s~nResult:~n ~p", + [case file:read_file(ConfFile) of + {ok,X} -> X; + _ -> "" + end, + Cmd, Result + ]), + case Result of + [] -> {ok,'dont care'}; + [Msg] -> {error,Msg} + end + end, + fun(_StartResult) -> os:cmd("ps ax | grep erlang_otp_testing | grep -v grep") + end, + fun(_StartResult) -> os:cmd("kill `ps ax | grep erlang_otp_testing | awk '/vsftpd/{print $1}'`") + end, + fun(__CONF__) -> + AnonRoot = proplists:get_value(priv_dir,__CONF__), + [{id2ftp, fun(Id) -> filename:join(AnonRoot,Id) end}, + {id2ftp_result,fun(Id) -> filename:join(AnonRoot,Id) end} | __CONF__] + end, + "localhost", + 9999 + } + ] + ). + + +init_per_suite(Config) -> + case find_executable(Config) of + false -> + {skip, "No ftp server found"}; + {ok,Data} -> + TstDir = filename:join(proplists:get_value(priv_dir,Config), "test"), + file:make_dir(TstDir), + %% make_cert_files(dsa, rsa, "server-", proplists:get_value(data_dir,Config)), + ftp_test_lib:make_cert_files(proplists:get_value(data_dir,Config)), + start_ftpd([{test_dir,TstDir}, + {ftpd_data,Data} + | Config]) + end. + +end_per_suite(Config) -> + ps_ftpd(Config), + stop_ftpd(Config), + ps_ftpd(Config), + ok. + +%%-------------------------------------------------------------------- +init_per_group(Group, Config) when Group == ftps_active, + Group == ftps_passive -> + catch crypto:stop(), + try crypto:start() of + ok -> + Config + catch + _:_ -> + {skip, "Crypto did not start"} + end; +init_per_group(ftp_sup, Config) -> + try ftp:start() of + ok -> + Config + catch + _:_ -> + {skip, "Ftp did not start"} + end; +init_per_group(_Group, Config) -> + Config. + + +end_per_group(ftp_sup, Config) -> + ftp:stop(), + Config; +end_per_group(_Group, Config) -> + Config. + +%%-------------------------------------------------------------------- +init_per_testcase(T, Config0) when T =:= app; T =:= appup -> + Config0; +init_per_testcase(Case, Config0) -> + Group = proplists:get_value(name, proplists:get_value(tc_group_properties,Config0)), + + %% Workaround for interoperability issues with vsftpd =< 3.0.2: + %% + %% vsftpd =< 3.0.2 does not support ECDHE ciphers and the ssl application + %% removed ciphers with RSA key exchange from its default cipher list. + %% To allow interoperability with old versions of vsftpd, cipher suites + %% with RSA key exchange are appended to the default cipher list. + All = ssl:cipher_suites(all, 'tlsv1.2'), + Default = ssl:cipher_suites(default, 'tlsv1.2'), + RSASuites = + ssl:filter_cipher_suites(All, [{key_exchange, fun(rsa) -> true; + (_) -> false end}]), + Suites = ssl:append_cipher_suites(RSASuites, Default), + TLS = [{tls,[{reuse_sessions,true},{ciphers, Suites}]}], + ACTIVE = [{mode,active}], + PASSIVE = [{mode,passive}], + CaseOpts = case Case of + progress_report_send -> [{progress, {?MODULE,progress,#progress{}}}]; + progress_report_recv -> [{progress, {?MODULE,progress,#progress{}}}]; + _ -> [] + end, + ExtraOpts = [verbose | CaseOpts], + Config = + case Group of + ftp_active -> ftp__open(Config0, ACTIVE ++ ExtraOpts); + ftps_active -> ftp__open(Config0, TLS++ ACTIVE ++ ExtraOpts); + ftp_passive -> ftp__open(Config0, PASSIVE ++ ExtraOpts); + ftps_passive -> ftp__open(Config0, TLS++PASSIVE ++ ExtraOpts); + ftp_sup -> ftp_start_service(Config0, ACTIVE ++ ExtraOpts); + undefined -> Config0 + end, + case Case of + user -> Config; + bad_user -> Config; + error_elogin -> Config; + error_ehost -> Config; + clean_shutdown -> Config; + _ -> + Pid = proplists:get_value(ftp,Config), + ok = ftp:user(Pid, ?FTP_USER, ?FTP_PASS(atom_to_list(Group)++"-"++atom_to_list(Case)) ), + ok = ftp:cd(Pid, proplists:get_value(priv_dir,Config)), + Config + end. + +end_per_testcase(T, _Config) when T =:= app; T =:= appup -> ok; +end_per_testcase(user, _Config) -> ok; +end_per_testcase(bad_user, _Config) -> ok; +end_per_testcase(error_elogin, _Config) -> ok; +end_per_testcase(error_ehost, _Config) -> ok; +end_per_testcase(clean_shutdown, _Config) -> ok; +end_per_testcase(_Case, Config) -> + case proplists:get_value(tc_status,Config) of + ok -> ok; + _ -> + try ftp:latest_ctrl_response(proplists:get_value(ftp,Config)) + of + {ok,S} -> ct:log("***~n*** Latest ctrl channel response:~n*** ~p~n***",[S]) + catch + _:_ -> ok + end + end, + Group = proplists:get_value(name, proplists:get_value(tc_group_properties,Config)), + case Group of + ftp_sup -> + ftp_stop_service(Config); + _Else -> + ftp__close(Config) + end. + +%%-------------------------------------------------------------------- +%% Test Cases -------------------------------------------------------- +%%-------------------------------------------------------------------- +app() -> + [{doc, "Test that the ftp app file is ok"}]. +app(Config) when is_list(Config) -> + ok = ?t:app_test(ftp). + +%%-------------------------------------------------------------------- +appup() -> + [{doc, "Test that the ftp appup file is ok"}]. +appup(Config) when is_list(Config) -> + ok = ?t:appup_test(ftp). + +%%-------------------------------------------------------------------- + +user() -> [ + {doc, "Open an ftp connection to a host, and logon as anonymous ftp," + " then logoff"}]. +user(Config) -> + Pid = proplists:get_value(ftp, Config), + ok = ftp:user(Pid, ?FTP_USER, ?FTP_PASS("")),% logon + ok = ftp:close(Pid), % logoff + {error,eclosed} = ftp:pwd(Pid), % check logoff result + ok. + +%%------------------------------------------------------------------------- +bad_user() -> + [{doc, "Open an ftp connection to a host, and logon with bad user."}]. +bad_user(Config) -> + Pid = proplists:get_value(ftp, Config), + {error, euser} = ftp:user(Pid, ?BAD_USER, ?FTP_PASS("")), + ok. + +%%------------------------------------------------------------------------- +pwd() -> + [{doc, "Test ftp:pwd/1 & ftp:lpwd/1"}]. +pwd(Config0) -> + Config = set_state([reset], Config0), + Pid = proplists:get_value(ftp, Config), + {ok, PWD} = ftp:pwd(Pid), + {ok, PathLpwd} = ftp:lpwd(Pid), + PWD = id2ftp_result("", Config), + PathLpwd = id2ftp_result("", Config). + +%%------------------------------------------------------------------------- +cd() -> + ["Open an ftp connection, log on as anonymous ftp, and cd to a" + "directory and to a non-existent directory."]. +cd(Config0) -> + Dir = "test", + Config = set_state([reset,{mkdir,Dir}], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:cd(Pid, id2ftp(Dir,Config)), + {ok, PWD} = ftp:pwd(Pid), + ExpectedPWD = id2ftp_result(Dir, Config), + PWD = ExpectedPWD, + {error, epath} = ftp:cd(Pid, ?BAD_DIR), + ok. + +%%------------------------------------------------------------------------- +lcd() -> + [{doc, "Test api function ftp:lcd/2"}]. +lcd(Config0) -> + Dir = "test", + Config = set_state([reset,{mkdir,Dir}], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:lcd(Pid, id2ftp(Dir,Config)), + {ok, PWD} = ftp:lpwd(Pid), + ExpectedPWD = id2ftp_result(Dir, Config), + PWD = ExpectedPWD, + {error, epath} = ftp:lcd(Pid, ?BAD_DIR). + +%%------------------------------------------------------------------------- +ls() -> + [{doc, "Open an ftp connection; ls the current directory, and the " + "\"test\" directory. We assume that ls never fails, since " + "it's output is meant to be read by humans. "}]. +ls(Config0) -> + Config = set_state([reset,{mkdir,"test"}], Config0), + Pid = proplists:get_value(ftp, Config), + {ok, _R1} = ftp:ls(Pid), + {ok, _R2} = ftp:ls(Pid, id2ftp("test",Config)), + %% neither nlist nor ls operates on a directory + %% they operate on a pathname, which *can* be a + %% directory, but can also be a filename or a group + %% of files (including wildcards). + case proplists:get_value(wildcard_support, Config) of + true -> + {ok, _R3} = ftp:ls(Pid, id2ftp("te*",Config)); + _ -> + ok + end. + +%%------------------------------------------------------------------------- +nlist() -> + [{doc,"Open an ftp connection; nlist the current directory, and the " + "\"test\" directory. Nlist does not behave consistenly over " + "operating systems. On some it is an error to have an empty " + "directory."}]. +nlist(Config0) -> + Config = set_state([reset,{mkdir,"test"}], Config0), + Pid = proplists:get_value(ftp, Config), + {ok, _R1} = ftp:nlist(Pid), + {ok, _R2} = ftp:nlist(Pid, id2ftp("test",Config)), + %% neither nlist nor ls operates on a directory + %% they operate on a pathname, which *can* be a + %% directory, but can also be a filename or a group + %% of files (including wildcards). + case proplists:get_value(wildcard_support, Config) of + true -> + {ok, _R3} = ftp:nlist(Pid, id2ftp("te*",Config)); + _ -> + ok + end. + +%%------------------------------------------------------------------------- +rename() -> + [{doc, "Rename a file."}]. +rename(Config0) -> + Contents = <<"ftp_SUITE test ...">>, + OldFile = "old.txt", + NewFile = "new.txt", + Config = set_state([reset,{mkfile,OldFile,Contents}], Config0), + Pid = proplists:get_value(ftp, Config), + + ok = ftp:rename(Pid, + id2ftp(OldFile,Config), + id2ftp(NewFile,Config)), + + true = (chk_file(NewFile,Contents,Config) + and chk_no_file([OldFile],Config)), + {error,epath} = ftp:rename(Pid, + id2ftp("non_existing_file",Config), + id2ftp(NewFile,Config)), + ok. + +%%------------------------------------------------------------------------- +send() -> + [{doc, "Transfer a file with ftp using send/2."}]. +send(Config0) -> + Contents = <<"ftp_SUITE test ...">>, + SrcDir = "data", + File = "file.txt", + Config = set_state([reset,{mkfile,[SrcDir,File],Contents}], Config0), + Pid = proplists:get_value(ftp, Config), + + chk_no_file([File],Config), + chk_file([SrcDir,File],Contents,Config), + + ok = ftp:lcd(Pid, id2ftp(SrcDir,Config)), + ok = ftp:cd(Pid, id2ftp("",Config)), + ok = ftp:send(Pid, File), + chk_file(File, Contents, Config), + + {error,epath} = ftp:send(Pid, "non_existing_file"), + ok. + +%%------------------------------------------------------------------------- +send_3() -> + [{doc, "Transfer a file with ftp using send/3."}]. +send_3(Config0) -> + Contents = <<"ftp_SUITE test ...">>, + Dir = "incoming", + File = "file.txt", + RemoteFile = "remfile.txt", + Config = set_state([reset,{mkfile,File,Contents},{mkdir,Dir}], Config0), + Pid = proplists:get_value(ftp, Config), + + ok = ftp:cd(Pid, id2ftp(Dir,Config)), + ok = ftp:lcd(Pid, id2ftp("",Config)), + ok = ftp:send(Pid, File, RemoteFile), + chk_file([Dir,RemoteFile], Contents, Config), + + {error,epath} = ftp:send(Pid, "non_existing_file", RemoteFile), + ok. + +%%------------------------------------------------------------------------- +send_bin() -> + [{doc, "Send a binary."}]. +send_bin(Config0) -> + BinContents = <<"ftp_SUITE test ...">>, + File = "file.txt", + Config = set_state([reset], Config0), + Pid = proplists:get_value(ftp, Config), + {error, enotbinary} = ftp:send_bin(Pid, "some string", id2ftp(File,Config)), + ok = ftp:send_bin(Pid, BinContents, id2ftp(File,Config)), + chk_file(File, BinContents, Config), + {error, efnamena} = ftp:send_bin(Pid, BinContents, "/nothere"), + ok. + +%%------------------------------------------------------------------------- +send_chunk() -> + [{doc, "Send a binary using chunks."}]. +send_chunk(Config0) -> + Contents1 = <<"1: ftp_SUITE test ...">>, + Contents2 = <<"2: ftp_SUITE test ...">>, + File = "file.txt", + Config = set_state([reset,{mkdir,"incoming"}], Config0), + Pid = proplists:get_value(ftp, Config), + + ok = ftp:send_chunk_start(Pid, id2ftp(File,Config)), + {error, echunk} = ftp:send_chunk_start(Pid, id2ftp(File,Config)), + {error, echunk} = ftp:cd(Pid, "incoming"), + {error, enotbinary} = ftp:send_chunk(Pid, "some string"), + ok = ftp:send_chunk(Pid, Contents1), + ok = ftp:send_chunk(Pid, Contents2), + ok = ftp:send_chunk_end(Pid), + chk_file(File, <<Contents1/binary,Contents2/binary>>, Config), + + {error, echunk} = ftp:send_chunk(Pid, Contents1), + {error, echunk} = ftp:send_chunk_end(Pid), + {error, efnamena} = ftp:send_chunk_start(Pid, "/"), + ok. + +%%------------------------------------------------------------------------- +delete() -> + [{doc, "Delete a file."}]. +delete(Config0) -> + Contents = <<"ftp_SUITE test ...">>, + File = "file.txt", + Config = set_state([reset,{mkfile,File,Contents}], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:delete(Pid, id2ftp(File,Config)), + chk_no_file([File], Config), + {error,epath} = ftp:delete(Pid, id2ftp(File,Config)), + ok. + +%%------------------------------------------------------------------------- +mkdir() -> + [{doc, "Make a remote directory."}]. +mkdir(Config0) -> + NewDir = "new_dir", + Config = set_state([reset], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:mkdir(Pid, id2ftp(NewDir,Config)), + chk_dir([NewDir], Config), + {error,epath} = ftp:mkdir(Pid, id2ftp(NewDir,Config)), + ok. + +%%------------------------------------------------------------------------- +rmdir() -> + [{doc, "Remove a directory."}]. +rmdir(Config0) -> + Dir = "dir", + Config = set_state([reset,{mkdir,Dir}], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:rmdir(Pid, id2ftp(Dir,Config)), + chk_no_dir([Dir], Config), + {error,epath} = ftp:rmdir(Pid, id2ftp(Dir,Config)), + ok. + +%%------------------------------------------------------------------------- +append() -> + [{doc, "Append a local file twice to a remote file"}]. +append(Config0) -> + SrcFile = "f_src.txt", + DstFile = "f_dst.txt", + Contents = <<"ftp_SUITE test ...">>, + Config = set_state([reset,{mkfile,SrcFile,Contents}], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:append(Pid, id2ftp(SrcFile,Config), id2ftp(DstFile,Config)), + ok = ftp:append(Pid, id2ftp(SrcFile,Config), id2ftp(DstFile,Config)), + chk_file(DstFile, <<Contents/binary,Contents/binary>>, Config), + {error,epath} = ftp:append(Pid, id2ftp("non_existing_file",Config), id2ftp(DstFile,Config)), + ok. + +%%------------------------------------------------------------------------- +append_bin() -> + [{doc, "Append a local file twice to a remote file using append_bin"}]. +append_bin(Config0) -> + DstFile = "f_dst.txt", + Contents = <<"ftp_SUITE test ...">>, + Config = set_state([reset], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:append_bin(Pid, Contents, id2ftp(DstFile,Config)), + ok = ftp:append_bin(Pid, Contents, id2ftp(DstFile,Config)), + chk_file(DstFile, <<Contents/binary,Contents/binary>>, Config). + +%%------------------------------------------------------------------------- +append_chunk() -> + [{doc, "Append chunks."}]. +append_chunk(Config0) -> + File = "f_dst.txt", + Contents = [<<"ER">>,<<"LE">>,<<"RL">>], + Config = set_state([reset], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:append_chunk_start(Pid, id2ftp(File,Config)), + {error, enotbinary} = ftp:append_chunk(Pid, binary_to_list(lists:nth(1,Contents))), + ok = ftp:append_chunk(Pid,lists:nth(1,Contents)), + ok = ftp:append_chunk(Pid,lists:nth(2,Contents)), + ok = ftp:append_chunk(Pid,lists:nth(3,Contents)), + ok = ftp:append_chunk_end(Pid), + chk_file(File, <<"ERLERL">>, Config). + +%%------------------------------------------------------------------------- +recv() -> + [{doc, "Receive a file using recv/2"}]. +recv(Config0) -> + File1 = "f_dst1.txt", + File2 = "f_dst2.txt", + SrcDir = "a_dir", + Contents1 = <<"1 ftp_SUITE test ...">>, + Contents2 = <<"2 ftp_SUITE test ...">>, + Config = set_state([reset, {mkfile,[SrcDir,File1],Contents1}, {mkfile,[SrcDir,File2],Contents2}], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:cd(Pid, id2ftp(SrcDir,Config)), + ok = ftp:lcd(Pid, id2ftp("",Config)), + ok = ftp:recv(Pid, File1), + chk_file(File1, Contents1, Config), + ok = ftp:recv(Pid, File2), + chk_file(File2, Contents2, Config), + {error,epath} = ftp:recv(Pid, "non_existing_file"), + ok. + +%%------------------------------------------------------------------------- +recv_3() -> + [{doc,"Receive a file using recv/3"}]. +recv_3(Config0) -> + DstFile = "f_src.txt", + SrcFile = "f_dst.txt", + Contents = <<"ftp_SUITE test ...">>, + Config = set_state([reset, {mkfile,SrcFile,Contents}], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:cd(Pid, id2ftp("",Config)), + ok = ftp:recv(Pid, SrcFile, id2abs(DstFile,Config)), + chk_file(DstFile, Contents, Config). + +%%------------------------------------------------------------------------- +recv_bin() -> + [{doc, "Receive a file as a binary."}]. +recv_bin(Config0) -> + File = "f_dst.txt", + Contents = <<"ftp_SUITE test ...">>, + Config = set_state([reset, {mkfile,File,Contents}], Config0), + Pid = proplists:get_value(ftp, Config), + {ok,Received} = ftp:recv_bin(Pid, id2ftp(File,Config)), + find_diff(Received, Contents), + {error,epath} = ftp:recv_bin(Pid, id2ftp("non_existing_file",Config)), + ok. + +%%------------------------------------------------------------------------- +recv_bin_twice() -> + [{doc, "Receive two files as a binaries."}]. +recv_bin_twice(Config0) -> + File1 = "f_dst1.txt", + File2 = "f_dst2.txt", + Contents1 = <<"1 ftp_SUITE test ...">>, + Contents2 = <<"2 ftp_SUITE test ...">>, + Config = set_state([reset, {mkfile,File1,Contents1}, {mkfile,File2,Contents2}], Config0), + ct:log("First transfer",[]), + Pid = proplists:get_value(ftp, Config), + {ok,Received1} = ftp:recv_bin(Pid, id2ftp(File1,Config)), + find_diff(Received1, Contents1), + ct:log("Second transfer",[]), + {ok,Received2} = ftp:recv_bin(Pid, id2ftp(File2,Config)), + find_diff(Received2, Contents2), + ct:log("Transfers ready!",[]), + {error,epath} = ftp:recv_bin(Pid, id2ftp("non_existing_file",Config)), + ok. +%%------------------------------------------------------------------------- +recv_chunk() -> + [{doc, "Receive a file using chunk-wise."}]. +recv_chunk(Config0) -> + File = "big_file.txt", + Contents = list_to_binary( lists:duplicate(1000, lists:seq(0,255)) ), + Config = set_state([reset, {mkfile,File,Contents}], Config0), + Pid = proplists:get_value(ftp, Config), + {error, "ftp:recv_chunk_start/2 not called"} = do_recv_chunk(Pid), + ok = ftp:recv_chunk_start(Pid, id2ftp(File,Config)), + {ok, ReceivedContents} = do_recv_chunk(Pid), + find_diff(ReceivedContents, Contents). + +recv_chunk_twice() -> + [{doc, "Receive two files using chunk-wise."}]. +recv_chunk_twice(Config0) -> + File1 = "big_file1.txt", + File2 = "big_file2.txt", + Contents1 = list_to_binary( lists:duplicate(1000, lists:seq(0,255)) ), + Contents2 = crypto:strong_rand_bytes(1200), + Config = set_state([reset, {mkfile,File1,Contents1}, {mkfile,File2,Contents2}], Config0), + Pid = proplists:get_value(ftp, Config), + {error, "ftp:recv_chunk_start/2 not called"} = do_recv_chunk(Pid), + ok = ftp:recv_chunk_start(Pid, id2ftp(File1,Config)), + {ok, ReceivedContents1} = do_recv_chunk(Pid), + ok = ftp:recv_chunk_start(Pid, id2ftp(File2,Config)), + {ok, ReceivedContents2} = do_recv_chunk(Pid), + find_diff(ReceivedContents1, Contents1), + find_diff(ReceivedContents2, Contents2). + +recv_chunk_three_times() -> + [{doc, "Receive two files using chunk-wise."}, + {timetrap,{seconds,120}}]. +recv_chunk_three_times(Config0) -> + File1 = "big_file1.txt", + File2 = "big_file2.txt", + File3 = "big_file3.txt", + Contents1 = list_to_binary( lists:duplicate(1000, lists:seq(0,255)) ), + Contents2 = crypto:strong_rand_bytes(1200), + Contents3 = list_to_binary( lists:duplicate(1000, lists:seq(255,0,-1)) ), + + Config = set_state([reset, {mkfile,File1,Contents1}, {mkfile,File2,Contents2}, {mkfile,File3,Contents3}], Config0), + Pid = proplists:get_value(ftp, Config), + {error, "ftp:recv_chunk_start/2 not called"} = do_recv_chunk(Pid), + + ok = ftp:recv_chunk_start(Pid, id2ftp(File3,Config)), + {ok, ReceivedContents3} = do_recv_chunk(Pid), + + ok = ftp:recv_chunk_start(Pid, id2ftp(File1,Config)), + {ok, ReceivedContents1} = do_recv_chunk(Pid), + + ok = ftp:recv_chunk_start(Pid, id2ftp(File2,Config)), + {ok, ReceivedContents2} = do_recv_chunk(Pid), + + find_diff(ReceivedContents1, Contents1), + find_diff(ReceivedContents2, Contents2), + find_diff(ReceivedContents3, Contents3). + + +do_recv_chunk(Pid) -> + recv_chunk(Pid, <<>>). +recv_chunk(Pid, Acc) -> + case ftp:recv_chunk(Pid) of + ok -> + {ok, Acc}; + {ok, Bin} -> + recv_chunk(Pid, <<Acc/binary, Bin/binary>>); + Error -> + Error + end. + +recv_chunk_delay(Config0) when is_list(Config0) -> + File1 = "big_file1.txt", + Contents = list_to_binary(lists:duplicate(1000, lists:seq(0,255))), + Config = set_state([reset, {mkfile,File1,Contents}], Config0), + Pid = proplists:get_value(ftp, Config), + ok = ftp:recv_chunk_start(Pid, id2ftp(File1,Config)), + {ok, ReceivedContents} = delay_recv_chunk(Pid), + find_diff(ReceivedContents, Contents). + +delay_recv_chunk(Pid) -> + delay_recv_chunk(Pid, <<>>). +delay_recv_chunk(Pid, Acc) -> + ct:pal("Recived size ~p", [byte_size(Acc)]), + case ftp:recv_chunk(Pid) of + ok -> + {ok, Acc}; + {ok, Bin} -> + ct:sleep(100), + delay_recv_chunk(Pid, <<Acc/binary, Bin/binary>>); + Error -> + Error + end. + +%%------------------------------------------------------------------------- +type() -> + [{doc,"Test that we can change btween ASCCI and binary transfer mode"}]. +type(Config) -> + Pid = proplists:get_value(ftp, Config), + ok = ftp:type(Pid, ascii), + ok = ftp:type(Pid, binary), + ok = ftp:type(Pid, ascii), + {error, etype} = ftp:type(Pid, foobar). + +%%------------------------------------------------------------------------- +quote(Config) -> + Pid = proplists:get_value(ftp, Config), + ["257 \""++_Rest] = ftp:quote(Pid, "pwd"), %% 257 + [_| _] = ftp:quote(Pid, "help"), + %% This negativ test causes some ftp servers to hang. This test + %% is not important for the client, so we skip it for now. + %%["425 Can't build data connection: Connection refused."] + %% = ftp:quote(Pid, "list"), + ok. + +%%------------------------------------------------------------------------- +progress_report_send() -> + [{doc, "Test the option progress for ftp:send/[2,3]"}]. +progress_report_send(Config) when is_list(Config) -> + ReportPid = + spawn_link(?MODULE, progress_report_receiver_init, [self(), 1]), + send(Config), + receive + {ReportPid, ok} -> + ok + end. + +%%------------------------------------------------------------------------- +progress_report_recv() -> + [{doc, "Test the option progress for ftp:recv/[2,3]"}]. +progress_report_recv(Config) when is_list(Config) -> + ReportPid = + spawn_link(?MODULE, progress_report_receiver_init, [self(), 3]), + recv(Config), + receive + {ReportPid, ok} -> + ok + end. + +%%------------------------------------------------------------------------- + +not_owner() -> + [{doc, "Test what happens if a process that not owns the connection tries " + "to use it"}]. +not_owner(Config) when is_list(Config) -> + Pid = proplists:get_value(ftp, Config), + + Parent = self(), + OtherPid = spawn_link( + fun() -> + {error, not_connection_owner} = ftp:pwd(Pid), + ftp:close(Pid), + Parent ! {self(), ok} + end), + receive + {OtherPid, ok} -> + {ok, _} = ftp:pwd(Pid) + end. + + +%%------------------------------------------------------------------------- + + +unexpected_call()-> + [{doc, "Test that behaviour of the ftp process if the api is abused"}]. +unexpected_call(Config) when is_list(Config) -> + Flag = process_flag(trap_exit, true), + Pid = proplists:get_value(ftp, Config), + + %% Serious programming fault, connetion will be shut down + case (catch gen_server:call(Pid, {self(), foobar, 10}, infinity)) of + {error, {connection_terminated, 'API_violation'}} -> + ok; + Unexpected1 -> + exit({unexpected_result, Unexpected1}) + end, + ct:sleep(500), + undefined = process_info(Pid, status), + process_flag(trap_exit, Flag). +%%------------------------------------------------------------------------- + +unexpected_cast()-> + [{doc, "Test that behaviour of the ftp process if the api is abused"}]. +unexpected_cast(Config) when is_list(Config) -> + Flag = process_flag(trap_exit, true), + Pid = proplists:get_value(ftp, Config), + %% Serious programming fault, connetion will be shut down + gen_server:cast(Pid, {self(), foobar, 10}), + ct:sleep(500), + undefined = process_info(Pid, status), + process_flag(trap_exit, Flag). +%%------------------------------------------------------------------------- + +unexpected_bang()-> + [{doc, "Test that connection ignores unexpected bang"}]. +unexpected_bang(Config) when is_list(Config) -> + Flag = process_flag(trap_exit, true), + Pid = proplists:get_value(ftp, Config), + %% Could be an innocent misstake the connection lives. + Pid ! foobar, + ct:sleep(500), + {status, _} = process_info(Pid, status), + process_flag(trap_exit, Flag). + +%%------------------------------------------------------------------------- + +clean_shutdown() -> + [{doc, "Test that owning process that exits with reason " + "'shutdown' does not cause an error message. OTP 6035"}]. + +clean_shutdown(Config) -> + Parent = self(), + HelperPid = spawn( + fun() -> + ftp__open(Config, [verbose]), + Parent ! ok, + receive + nothing -> ok + end + end), + receive + ok -> + PrivDir = proplists:get_value(priv_dir, Config), + LogFile = filename:join([PrivDir,"ticket_6035.log"]), + error_logger:logfile({open, LogFile}), + exit(HelperPid, shutdown), + timer:sleep(2000), + error_logger:logfile(close), + case is_error_report_6035(LogFile) of + true -> ok; + false -> {fail, "Bad logfile"} + end + end. + +%%------------------------------------------------------------------------- +start_ftp() -> + [{doc, "Start/stop of ftp service"}]. +start_ftp(Config) -> + Pid0 = proplists:get_value(ftp,Config), + Pids0 = [ServicePid || {_, ServicePid} <- ftp:services()], + true = lists:member(Pid0, Pids0), + {ok, [_|_]} = ftp:service_info(Pid0), + ftp:stop_service(Pid0), + ct:sleep(100), + Pids1 = [ServicePid || {_, ServicePid} <- ftp:services()], + false = lists:member(Pid0, Pids1), + + Host = proplists:get_value(ftpd_host,Config), + Port = proplists:get_value(ftpd_port,Config), + + {ok, Pid1} = ftp:start_standalone([{host, Host},{port, Port}]), + Pids2 = [ServicePid || {_, ServicePid} <- ftp:services()], + false = lists:member(Pid1, Pids2). + +%%------------------------------------------------------------------------- +ftp_worker() -> + [{doc, "Makes sure the ftp worker processes are added and removed " + "appropriatly to/from the supervison tree."}]. +ftp_worker(Config) -> + Pid = proplists:get_value(ftp,Config), + case supervisor:which_children(ftp_sup) of + [{_,_, worker, [ftp]}] -> + ftp:stop_service(Pid), + ct:sleep(5000), + [] = supervisor:which_children(ftp_sup), + ok; + Children -> + ct:fail("Unexpected children: ~p",[Children]) + end. + + +%%%---------------------------------------------------------------- +%%% Error codes not tested elsewhere + +error_elogin(Config0) -> + Dir = "test", + OldFile = "old.txt", + NewFile = "new.txt", + SrcDir = "data", + File = "file.txt", + Config = set_state([reset, + {mkdir,Dir}, + {mkfile,OldFile,<<"Contents..">>}, + {mkfile,[SrcDir,File],<<"Contents..">>}], Config0), + + Pid = proplists:get_value(ftp, Config), + ok = ftp:lcd(Pid, id2ftp(SrcDir,Config)), + {error,elogin} = ftp:send(Pid, File), + ok = ftp:lcd(Pid, id2ftp("",Config)), + {error,elogin} = ftp:pwd(Pid), + {error,elogin} = ftp:cd(Pid, id2ftp(Dir,Config)), + {error,elogin} = ftp:rename(Pid, + id2ftp(OldFile,Config), + id2ftp(NewFile,Config)), + ok. + +error_ehost(_Config) -> + {error, ehost} = ftp:open("nohost.nodomain"), + ok. + +%%-------------------------------------------------------------------- +%% Internal functions ----------------------------------------------- +%%-------------------------------------------------------------------- + +chk_file(Path=[C|_], ExpectedContents, Config) when 0<C,C=<255 -> + chk_file([Path], ExpectedContents, Config); + +chk_file(PathList, ExpectedContents, Config) -> + Path = filename:join(PathList), + AbsPath = id2abs(Path,Config), + case file:read_file(AbsPath) of + {ok,ExpectedContents} -> + true; + {ok,ReadContents} -> + {error,{diff,Pos,RC,LC}} = find_diff(ReadContents, ExpectedContents, 1), + ct:log("Bad contents of ~p.~nGot:~n~p~nExpected:~n~p~nDiff at pos ~p ~nRead: ~p~nExp : ~p", + [AbsPath,ReadContents,ExpectedContents,Pos,RC,LC]), + ct:fail("Bad contents of ~p", [Path]); + {error,Error} -> + try begin + {ok,CWD} = file:get_cwd(), + ct:log("file:get_cwd()=~p~nfiles:~n~p",[CWD,file:list_dir(CWD)]) + end + of _ -> ok + catch _:_ ->ok + end, + ct:fail("Error reading ~p: ~p",[Path,Error]) + end. + + +chk_no_file(Path=[C|_], Config) when 0<C,C=<255 -> + chk_no_file([Path], Config); + +chk_no_file(PathList, Config) -> + Path = filename:join(PathList), + AbsPath = id2abs(Path,Config), + case file:read_file(AbsPath) of + {error,enoent} -> + true; + {ok,Contents} -> + ct:log("File ~p exists although it shouldn't. Contents:~n~p", + [AbsPath,Contents]), + ct:fail("File exists: ~p", [Path]); + {error,Error} -> + ct:fail("Unexpected error reading ~p: ~p",[Path,Error]) + end. + + +chk_dir(Path=[C|_], Config) when 0<C,C=<255 -> + chk_dir([Path], Config); + +chk_dir(PathList, Config) -> + Path = filename:join(PathList), + AbsPath = id2abs(Path,Config), + case file:read_file_info(AbsPath) of + {ok, #file_info{type=directory}} -> + true; + {ok, #file_info{type=Type}} -> + ct:fail("Expected dir ~p is a ~p",[Path,Type]); + {error,Error} -> + ct:fail("Expected dir ~p: ~p",[Path,Error]) + end. + +chk_no_dir(PathList, Config) -> + Path = filename:join(PathList), + AbsPath = id2abs(Path,Config), + case file:read_file_info(AbsPath) of + {error,enoent} -> + true; + {ok, #file_info{type=directory}} -> + ct:fail("Dir ~p erroneously exists",[Path]); + {ok, #file_info{type=Type}} -> + ct:fail("~p ~p erroneously exists",[Type,Path]); + {error,Error} -> + ct:fail("Unexpected error for ~p: ~p",[Path,Error]) + end. + +%%-------------------------------------------------------------------- +find_executable(Config) -> + search_executable(proplists:get_value(ftpservers, Config, ?default_ftp_servers)). + + +search_executable([{Name,Paths,_StartCmd,_ChkUp,_StopCommand,_ConfigUpd,_Host,_Port}|Srvrs]) -> + case os_find(Name,Paths) of + false -> + ct:log("~p not found",[Name]), + search_executable(Srvrs); + AbsName -> + ct:comment("Found ~p",[AbsName]), + {ok, {AbsName,_StartCmd,_ChkUp,_StopCommand,_ConfigUpd,_Host,_Port}} + end; +search_executable([]) -> + false. + + +os_find(Name, Paths) -> + case os:find_executable(Name, Paths) of + false -> os:find_executable(Name); + AbsName -> AbsName + end. + +%%%---------------------------------------------------------------- +start_ftpd(Config0) -> + {AbsName,StartCmd,_ChkUp,_StopCommand,ConfigRewrite,Host,Port} = + proplists:get_value(ftpd_data, Config0), + case StartCmd(Config0, AbsName) of + {ok,StartResult} -> + Config = [{ftpd_host,Host}, + {ftpd_port,Port}, + {ftpd_start_result,StartResult} | ConfigRewrite(Config0)], + try + ftp__close(ftp__open(Config,[verbose])) + of + Config1 when is_list(Config1) -> + ct:log("Usuable ftp server ~p started on ~p:~p",[AbsName,Host,Port]), + Config + catch + Class:Exception -> + ct:log("Ftp server ~p started on ~p:~p but is unusable:~n~p:~p", + [AbsName,Host,Port,Class,Exception]), + {skip, [AbsName," started but unusuable"]} + end; + {error,Msg} -> + {skip, [AbsName," not started: ",Msg]} + end. + +stop_ftpd(Config) -> + {_Name,_StartCmd,_ChkUp,StopCommand,_ConfigUpd,_Host,_Port} = proplists:get_value(ftpd_data, Config), + StopCommand(proplists:get_value(ftpd_start_result,Config)). + +ps_ftpd(Config) -> + {_Name,_StartCmd,ChkUp,_StopCommand,_ConfigUpd,_Host,_Port} = proplists:get_value(ftpd_data, Config), + ct:log( ChkUp(proplists:get_value(ftpd_start_result,Config)) ). + + +ftpd_running(Config) -> + {_Name,_StartCmd,ChkUp,_StopCommand,_ConfigUpd,_Host,_Port} = proplists:get_value(ftpd_data, Config), + ChkUp(proplists:get_value(ftpd_start_result,Config)). + +ftp__open(Config, Options) -> + Host = proplists:get_value(ftpd_host,Config), + Port = proplists:get_value(ftpd_port,Config), + ct:log("Host=~p, Port=~p",[Host,Port]), + {ok,Pid} = ftp:open(Host, [{port,Port} | Options]), + [{ftp,Pid}|Config]. + +ftp__close(Config) -> + ok = ftp:close(proplists:get_value(ftp,Config)), + Config. + +ftp_start_service(Config, Options) -> + Host = proplists:get_value(ftpd_host,Config), + Port = proplists:get_value(ftpd_port,Config), + ct:log("Host=~p, Port=~p",[Host,Port]), + {ok,Pid} = ftp:start_service([{host, Host},{port,Port} | Options]), + [{ftp,Pid}|Config]. + +ftp_stop_service(Config) -> + ok = ftp:stop_service(proplists:get_value(ftp,Config)), + Config. + +split(Cs) -> string:tokens(Cs, "\r\n"). + +find_diff(Bin1, Bin2) -> + case find_diff(Bin1, Bin2, 1) of + {error, {diff,Pos,RC,LC}} -> + ct:log("Contents differ at position ~p.~nOp1: ~p~nOp2: ~p",[Pos,RC,LC]), + ct:fail("Contents differ at pos ~p",[Pos]); + Other -> + Other + end. + +find_diff(A, A, _) -> true; +find_diff(<<H,T1/binary>>, <<H,T2/binary>>, Pos) -> find_diff(T1, T2, Pos+1); +find_diff(RC, LC, Pos) -> {error, {diff, Pos, RC, LC}}. + +set_state(Ops, Config) when is_list(Ops) -> lists:foldl(fun set_state/2, Config, Ops); + +set_state(reset, Config) -> + rm('*', id2abs("",Config)), + PrivDir = proplists:get_value(priv_dir,Config), + file:set_cwd(PrivDir), + ftp:lcd(proplists:get_value(ftp,Config),PrivDir), + set_state({mkdir,""},Config); +set_state({mkdir,Id}, Config) -> + Abs = id2abs(Id, Config), + mk_path(Abs), + file:make_dir(Abs), + Config; +set_state({mkfile,Id,Contents}, Config) -> + Abs = id2abs(Id, Config), + mk_path(Abs), + ok = file:write_file(Abs, Contents), + Config. + +mk_path(Abs) -> lists:foldl(fun mk_path/2, [], filename:split(filename:dirname(Abs))). + +mk_path(F, Pfx) -> + case file:read_file_info(AbsName=filename:join(Pfx,F)) of + {ok,#file_info{type=directory}} -> + AbsName; + {error,eexist} -> + AbsName; + {error,enoent} -> + ok = file:make_dir(AbsName), + AbsName + end. + +rm('*', Pfx) -> + {ok,Fs} = file:list_dir(Pfx), + lists:foreach(fun(F) -> rm(F, Pfx) end, Fs); +rm(F, Pfx) -> + case file:read_file_info(AbsName=filename:join(Pfx,F)) of + {ok,#file_info{type=directory}} -> + {ok,Fs} = file:list_dir(AbsName), + lists:foreach(fun(F1) -> rm(F1,AbsName) end, Fs), + ok = file:del_dir(AbsName); + + {ok,#file_info{type=regular}} -> + ok = file:delete(AbsName); + + {error,enoent} -> + ok + end. + +id2abs(Id, Conf) -> filename:join(proplists:get_value(priv_dir,Conf),ids(Id)). +id2ftp(Id, Conf) -> (proplists:get_value(id2ftp,Conf))(ids(Id)). +id2ftp_result(Id, Conf) -> (proplists:get_value(id2ftp_result,Conf))(ids(Id)). + +ids([[_|_]|_]=Ids) -> filename:join(Ids); +ids(Id) -> Id. + + +is_expected_absName(Id, File, Conf) -> File = (proplists:get_value(id2abs,Conf))(Id). +is_expected_ftpInName(Id, File, Conf) -> File = (proplists:get_value(id2ftp,Conf))(Id). +is_expected_ftpOutName(Id, File, Conf) -> File = (proplists:get_value(id2ftp_result,Conf))(Id). + + +%%%---------------------------------------------------------------- +%%% Help functions for the option '{progress,Progress}' +%%% + +%%%---------------- +%%% Callback: + +progress(#progress{} = P, _File, {file_size, Total} = M) -> + ct:pal("Progress: ~p",[M]), + progress_report_receiver ! start, + P#progress{total = Total}; + +progress(#progress{current = Current} = P, _File, {transfer_size, 0} = M) -> + ct:pal("Progress: ~p",[M]), + progress_report_receiver ! finish, + case P#progress.total of + unknown -> P; + Current -> P; + Total -> ct:fail({error, {progress, {total,Total}, {current,Current}}}), + P + end; + +progress(#progress{current = Current} = P, _File, {transfer_size, Size} = M) -> + ct:pal("Progress: ~p",[M]), + progress_report_receiver ! update, + P#progress{current = Current + Size}; + +progress(P, _File, M) -> + ct:pal("Progress **** Strange: ~p",[M]), + P. + + +%%%---------------- +%%% Help process that counts the files transferred: + +progress_report_receiver_init(Parent, N) -> + register(progress_report_receiver, self()), + progress_report_receiver_expect_N_files(Parent, N). + +progress_report_receiver_expect_N_files(_Parent, 0) -> + ct:pal("progress_report got all files!", []); +progress_report_receiver_expect_N_files(Parent, N) -> + ct:pal("progress_report expects ~p more files",[N]), + receive + start -> ok + end, + progress_report_receiver_loop(Parent, N-1). + + +progress_report_receiver_loop(Parent, N) -> + ct:pal("progress_report expect update | finish. N = ~p",[N]), + receive + update -> + ct:pal("progress_report got update",[]), + progress_report_receiver_loop(Parent, N); + finish -> + ct:pal("progress_report got finish, send ~p to ~p",[{self(),ok}, Parent]), + Parent ! {self(), ok}, + progress_report_receiver_expect_N_files(Parent, N) + end. + +%%%---------------------------------------------------------------- +%%% Help functions for bug OTP-6035 + +is_error_report_6035(LogFile) -> + case file:read_file(LogFile) of + {ok, Bin} -> + nomatch =/= binary:match(Bin, <<"=ERROR REPORT====">>); + _ -> + false + end. + diff --git a/lib/ftp/test/ftp_SUITE_data/ftpd_hosts.skel b/lib/ftp/test/ftp_SUITE_data/ftpd_hosts.skel new file mode 100644 index 0000000000..75096ce687 --- /dev/null +++ b/lib/ftp/test/ftp_SUITE_data/ftpd_hosts.skel @@ -0,0 +1,18 @@ +%% Add a host name in the appropriate list +%% Each "platform" contains a list of hostnames (a string) that can +%% be used for testing the ftp client. +%% The definition below are an example!! +[{solaris8_sparc, ["solaris8_sparc_dummy1", "solaris8_sparc_dummy2"]}, + {solaris9_sparc, ["solaris9_sparc_dummy1"]}, + {solaris10_sparc, ["solaris10_sparc_dummy1"]}, + {solaris10_x86, ["solaris10_x86_dummy1", "solaris10_x86_dummy2"]}, + {linux_x86, ["linux_x86_dummy1", "linux_x86_dummy2"]}, + {linux_ppc, ["linux_ppc_dummy1"]}, + {macosx_ppc, ["macosx_ppc_dummy1"]}, + {macosx_x86, ["macosx_x86_dummy1", "macosx_x86_dummy2"]}, + {openbsd_x86, []}, + {freebsd_x86, ["freebsd_x86_dummy1"]}, + {netbsd_x86, []}, + {windows_xp, []}, + {windows_2003_server, ["win2003_dummy1"]}, + {ticket_test, ["solaris8_x86_dummy1", "linux_x86_dummy1"]}]. diff --git a/lib/ftp/test/ftp_SUITE_data/vsftpd.conf b/lib/ftp/test/ftp_SUITE_data/vsftpd.conf new file mode 100644 index 0000000000..4568fad147 --- /dev/null +++ b/lib/ftp/test/ftp_SUITE_data/vsftpd.conf @@ -0,0 +1,33 @@ + +### +### Some parameters are given in the vsftpd start command. +### +### Typical command-line paramters are such that has a file path +### component like cert files. +### + + +listen=YES +listen_port=9999 +run_as_launching_user=YES +ssl_enable=YES +ssl_ciphers=HIGH:!aNULL:!MD5 +allow_anon_ssl=YES + +background=YES + +write_enable=YES +anonymous_enable=YES +anon_upload_enable=YES +anon_mkdir_write_enable=YES +anon_other_write_enable=YES +anon_world_readable_only=NO + +### Shouldn't be necessary.... +require_ssl_reuse=NO + +### Logging +#vsftpd_log_file=/devel/otp/vsftpd.log +#xferlog_enable=YES +#xferlog_std_format=NO +#log_ftp_protocol=YES
\ No newline at end of file diff --git a/lib/ftp/test/ftp_bench.spec b/lib/ftp/test/ftp_bench.spec new file mode 100644 index 0000000000..4d1ecf8891 --- /dev/null +++ b/lib/ftp/test/ftp_bench.spec @@ -0,0 +1 @@ +{suites,"../ftp_test",[]}. diff --git a/lib/ftp/test/ftp_format_SUITE.erl b/lib/ftp/test/ftp_format_SUITE.erl new file mode 100644 index 0000000000..e1d0de2390 --- /dev/null +++ b/lib/ftp/test/ftp_format_SUITE.erl @@ -0,0 +1,328 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2005-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% +-module(ftp_format_SUITE). +-author('[email protected]'). + +-include_lib("common_test/include/ct.hrl"). +-include("ftp_internal.hrl"). + +%% Note: This directive should only be used in test suites. +-compile(export_all). + +suite() -> + [{ct_hooks,[ts_install_cth]}, + {timetrap,{seconds,5}} + ]. + +all() -> + [{group, ftp_response}, format_error]. + +groups() -> + [{ftp_response, [], + [ftp_150, ftp_200, ftp_220, ftp_226, ftp_257, ftp_331, + ftp_425, ftp_other_status_codes, ftp_multiple_lines_status_in_msg, + ftp_multiple_lines, ftp_multipel_ctrl_messages]}]. + +init_per_suite(Config) -> + Config. + +end_per_suite(_Config) -> + ok. + +init_per_group(_GroupName, Config) -> + Config. + +end_per_group(_GroupName, Config) -> + Config. + + +init_per_testcase(_, Config) -> + Config. +end_per_testcase(_, _) -> + ok. + +%%------------------------------------------------------------------------- +%% Test cases starts here. +%%------------------------------------------------------------------------- + +ftp_150() -> + [{doc, "Especially check that respons can be devided in a random place."}]. +ftp_150(Config) when is_list(Config) -> + FtpResponse = ["150 ASCII data conn", "ection for /bin/ls ", + "(134.138.177", ".89,50434) (0 bytes).\r\n"], + + "150 ASCII data connection for /bin/ls " + "(134.138.177.89,50434) (0 bytes).\r\n" = Msg = + parse(ftp_response, parse_lines, [[], start], FtpResponse), + {pos_prel, _} = ftp_response:interpret(Msg). + +ftp_200() -> + [{doc, "Especially check that respons can be devided after the first status " + "code character and in the end delimiter."}]. +ftp_200(Config) when is_list(Config) -> + FtpResponse = ["2", "00 PORT command successful.", [?CR], [?LF]], + + "200 PORT command successful.\r\n" = Msg = + parse(ftp_response, parse_lines, [[], start], FtpResponse), + {pos_compl, _} = ftp_response:interpret(Msg), + ok. + +ftp_220() -> + [{doc, "Especially check that respons can be devided after the " + "first with space "}]. +ftp_220(Config) when is_list(Config) -> + FtpResponse = ["220 ","fingon FTP server (SunOS 5.8) ready.\r\n"], + + "220 fingon FTP server (SunOS 5.8) ready.\r\n" = Msg = + parse(ftp_response, parse_lines, [[], start], FtpResponse), + {pos_compl, _} = ftp_response:interpret(Msg), + ok. + +ftp_226() -> + [{doc, "Especially check that respons can be devided after second status code" + " character and in the end delimiter."}]. +ftp_226(Config) when is_list(Config) -> + FtpResponse = ["22" "6 Transfer complete.\r", [?LF]], + + "226 Transfer complete.\r\n" = Msg = + parse(ftp_response, parse_lines, [[], start], FtpResponse), + {pos_compl, _} = ftp_response:interpret(Msg), + ok. + +ftp_257() -> + [{doc, "Especially check that quoted chars do not cause a problem."}]. +ftp_257(Config) when is_list(Config) -> + FtpResponse = ["257 \"/\" is current directory.\r\n"], + + "257 \"/\" is current directory.\r\n" = Msg = + parse(ftp_response, parse_lines, [[], start], FtpResponse), + {pos_compl, _} = ftp_response:interpret(Msg), + ok. + +ftp_331() -> + [{doc, "Especially check that respons can be devided after the third status " + " status code character."}]. +ftp_331(Config) when is_list(Config) -> + %% Brake before white space after code + FtpResponse = + ["331"," Guest login ok, send ient as password.\r\n"], + + "331 Guest login ok, send ient as password.\r\n" = Msg = + parse(ftp_response, parse_lines, [[], start], FtpResponse), + {pos_interm, _} = ftp_response:interpret(Msg), + ok. + +ftp_425() -> + [{doc, "Especially check a message that was received in only one part."}]. +ftp_425(Config) when is_list(Config) -> + FtpResponse = + ["425 Can't build data connection: Connection refused.\r\n"], + + "425 Can't build data connection: Connection refused.\r\n" + = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse), + {trans_neg_compl, _} = ftp_response:interpret(Msg), + ok. + +ftp_multiple_lines_status_in_msg() -> + [{doc, "check that multiple lines gets parsed correct, even if we have " + " the status code within the msg being sent"}]. +ftp_multiple_lines_status_in_msg(Config) when is_list(Config) -> + ML = "230-User usr-230 is logged in\r\n" ++ + "230 OK. Current directory is /\r\n", + {ok, ML, <<>>} = ftp_response:parse_lines(list_to_binary(ML), [], start), + ok. + +ftp_multiple_lines() -> + [{doc, "Especially check multiple lines devided in significant places"}]. +ftp_multiple_lines(Config) when is_list(Config) -> + FtpResponse = ["21", "4","-The", + " following commands are recognized:\r\n" + " USER EPRT STRU MAIL* ALLO CWD", + " STAT* XRMD \r\n" + " PASS LPRT MODE MSND* " + " REST* XCWD HELP PWD ", [?CRLF], + " ACCT* EPSV RETR MSOM* RNFR LIST " + " NOOP XPWD \r\n", + " REIN* LPSV STOR MSAM* RNTO NLST " + " MKD CDUP \r\n" + " QUIT PASV APPE MRSQ* ABOR SITE* " + " XMKD XCUP \r\n" + " PORT TYPE MLFL* MRCP* DELE SYST " + " RMD STOU \r\n" + "214 (*'s => unimplemented)", [?CR], [?LF]], + + + FtpResponse1 = ["214-", "The", + " following commands are recognized:\r\n" + " USER EPRT STRU MAIL* ALLO CWD", + " STAT* XRMD \r\n" + " PASS LPRT MODE MSND* " + " REST* XCWD HELP PWD ", [?CRLF], + " ACCT* EPSV RETR MSOM* RNFR LIST " + " NOOP XPWD \r\n", + " REIN* LPSV STOR MSAM* RNTO NLST " + " MKD CDUP \r\n" + " QUIT PASV APPE MRSQ* ABOR SITE* " + " XMKD XCUP \r\n" + " PORT TYPE MLFL* MRCP* DELE SYST " + " RMD STOU \r\n" + "2", "14 (*'s => unimplemented)", [?CR], [?LF]], + + FtpResponse2 = ["214-", "The", + " following commands are recognized:\r\n" + " USER EPRT STRU MAIL* ALLO CWD", + " STAT* XRMD \r\n" + " PASS LPRT MODE MSND* " + " REST* XCWD HELP PWD ", [?CRLF], + " ACCT* EPSV RETR MSOM* RNFR LIST " + " NOOP XPWD \r\n", + " REIN* LPSV STOR MSAM* RNTO NLST " + " MKD CDUP \r\n" + " QUIT PASV APPE MRSQ* ABOR SITE* " + " XMKD XCUP \r\n" + " PORT TYPE MLFL* MRCP* DELE SYST " + " RMD STOU \r\n" + "21", "4"," (*'s => unimplemented)", [?CR], [?LF]], + + MultiLineResultStr = + "214-The following commands are recognized:\r\n" + " USER EPRT STRU MAIL* ALLO CWD STAT* " + "XRMD \r\n" + " PASS LPRT MODE MSND* REST* XCWD HELP " + "PWD \r\n" + " ACCT* EPSV RETR MSOM* RNFR LIST NOOP " + "XPWD \r\n" + " REIN* LPSV STOR MSAM* RNTO NLST MKD " + "CDUP \r\n" + " QUIT PASV APPE MRSQ* ABOR SITE* XMKD " + "XCUP \r\n" + " PORT TYPE MLFL* MRCP* DELE SYST RMD " + "STOU \r\n" + "214 (*'s => unimplemented)\r\n", + + MultiLineResultStr = + parse(ftp_response, parse_lines, [[], start], FtpResponse), + {pos_compl, _} = ftp_response:interpret(MultiLineResultStr), + + MultiLineResultStr = parse(ftp_response, parse_lines, [[], start], + FtpResponse1), + + MultiLineResultStr = parse(ftp_response, parse_lines, [[], start], + FtpResponse2), + ok. + +ftp_other_status_codes() -> + [{doc, "Check that other valid status codes, than the ones above, are handled" + "by ftp_response:interpret/1. Note there are som ftp status codes" + "that will not be received with the current ftp instruction support," + "they are not included here."}]. +ftp_other_status_codes(Config) when is_list(Config) -> + + %% 1XX + {pos_prel, _ } = ftp_response:interpret("120 Foobar\r\n"), + + %% 2XX + {pos_compl, _ } = ftp_response:interpret("202 Foobar\r\n"), + {pos_compl, _ } = ftp_response:interpret("221 Foobar\r\n"), + {pos_compl, _ } = ftp_response:interpret("227 Foobar\r\n"), + {pos_compl, _ } = ftp_response:interpret("230 Foobar\r\n"), + {pos_compl, _ } = ftp_response:interpret("250 Foobar\r\n"), + + %% 3XX + {pos_interm_acct, _ } = ftp_response:interpret("332 Foobar\r\n"), + {pos_interm, _ } = ftp_response:interpret("350 Foobar\r\n"), + + %% 4XX + {trans_neg_compl, _ } = ftp_response:interpret("421 Foobar\r\n"), + {trans_neg_compl, _ } = ftp_response:interpret("426 Foobar\r\n"), + {enofile, _ } = ftp_response:interpret("450 Foobar\r\n"), + {trans_neg_compl, _ } = ftp_response:interpret("451 Foobar\r\n"), + {etnospc, _ } = ftp_response:interpret("452 Foobar\r\n"), + + %% 5XX + {perm_neg_compl, _ } = ftp_response:interpret("500 Foobar\r\n"), + {perm_neg_compl, _ } = ftp_response:interpret("501 Foobar\r\n"), + {perm_neg_compl, _ } = ftp_response:interpret("503 Foobar\r\n"), + {perm_neg_compl, _ } = ftp_response:interpret("504 Foobar\r\n"), + {elogin, _ } = ftp_response:interpret("530 Foobar\r\n"), + {perm_neg_compl, _ } = ftp_response:interpret("532 Foobar\r\n"), + {epath, _ } = ftp_response:interpret("550 Foobar\r\n"), + {epnospc, _ } = ftp_response:interpret("552 Foobar\r\n"), + {efnamena, _ } = ftp_response:interpret("553 Foobar\r\n"), + ok. + +ftp_multipel_ctrl_messages() -> + [{doc, "The ftp server may send more than one control message as a reply," + "check that they are handled one at the time."}]. +ftp_multipel_ctrl_messages(Config) when is_list(Config) -> + FtpResponse = ["200 PORT command successful.\r\n200 Foobar\r\n"], + + {"200 PORT command successful.\r\n" = Msg, NextMsg} = + parse(ftp_response, parse_lines, [[], start], FtpResponse), + {pos_compl, _} = ftp_response:interpret(Msg), + NewMsg = parse(ftp_response, parse_lines, [[], start], NextMsg), + {pos_compl, _} = ftp_response:interpret(NewMsg), + ok. + + +%%------------------------------------------------------------------------- +format_error(Config) when is_list(Config) -> + "Synchronisation error during chunk sending." = + ftp:formaterror(echunk), + "Session has been closed." = ftp:formaterror(eclosed), + "Connection to remote server prematurely closed." = + ftp:formaterror(econn), + "File or directory already exists." = ftp:formaterror(eexists), + "Host not found, FTP server not found, or connection rejected." = + ftp:formaterror(ehost), + "User not logged in." = ftp:formaterror(elogin), + "Term is not a binary." = ftp:formaterror(enotbinary), + "No such file or directory, already exists, or permission denied." + = ftp:formaterror(epath), + "No such type." = ftp:formaterror(etype), + "User name or password not valid." = ftp:formaterror(euser), + "Insufficient storage space in system." = ftp:formaterror(etnospc), + "Exceeded storage allocation (for current directory or dataset)." + = ftp:formaterror(epnospc), + "File name not allowed." = ftp:formaterror(efnamena), + "Unknown error: foobar" = ftp:formaterror({error, foobar}). + +%%-------------------------------------------------------------------- +%%% Internal functions +%%-------------------------------------------------------------------- +parse(Module, Function, Args, Bin) when is_binary(Bin) -> + parse(Module, Function, Args, [binary_to_list(Bin)]); + +parse(Module, Function, [AccLines, StatusCode], [Data | Rest]) -> + case Module:Function(list_to_binary(Data), AccLines, StatusCode) of + {ok, Result, <<>>} -> + Result; + {ok, Result, Next} -> + {Result, Next}; + {continue, {NewData, NewAccLines, NewStatusCode}} -> + case Rest of + [] -> + ct:fail({wrong_input, Data, Rest}); + [_ | _] -> + parse(Module, Function, [NewAccLines, NewStatusCode], + [binary_to_list(NewData) ++ hd(Rest) | tl(Rest)]) + end + end. diff --git a/lib/ftp/test/ftp_internal.hrl b/lib/ftp/test/ftp_internal.hrl new file mode 120000 index 0000000000..2ae5c46460 --- /dev/null +++ b/lib/ftp/test/ftp_internal.hrl @@ -0,0 +1 @@ +../src/ftp_internal.hrl
\ No newline at end of file diff --git a/lib/ftp/test/ftp_property_test_SUITE.erl b/lib/ftp/test/ftp_property_test_SUITE.erl new file mode 100644 index 0000000000..cd43613b9e --- /dev/null +++ b/lib/ftp/test/ftp_property_test_SUITE.erl @@ -0,0 +1,55 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2004-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% + +%%% Run like this: +%%% ct:run_test([{suite,"ftp_property_test_SUITE"}, {logdir,"/ldisk/OTP/LOG"}]). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%%% %%% +%%% WARNING %%% +%%% %%% +%%% This is experimental code which may be changed or removed %%% +%%% anytime without any warning. %%% +%%% %%% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +-module(ftp_property_test_SUITE). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). + +all() -> [prop_ftp_case]. + + +init_per_suite(Config) -> + ftp:start(), + ct_property_test:init_per_suite(Config). + +end_per_suite(Config) -> + Config. + +%%%---- test case +prop_ftp_case(Config) -> + ct_property_test:quickcheck( + ftp_simple_client_server:prop_ftp(Config), + Config + ). diff --git a/lib/ftp/test/ftp_test_lib.erl b/lib/ftp/test/ftp_test_lib.erl new file mode 100644 index 0000000000..f5fbc39037 --- /dev/null +++ b/lib/ftp/test/ftp_test_lib.erl @@ -0,0 +1,126 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2001-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% +-module(ftp_test_lib). + +-include_lib("public_key/include/public_key.hrl"). + +-export([make_cert_files/1]). + + +make_cert_files(Dir) -> + #{server_config := ServerConf, + client_config := _} = + public_key:pkix_test_data(#{server_chain => + #{root => [{key, hardcode_rsa_key(1)}], + intermediates => [[{key, hardcode_rsa_key(2)}]], + peer => [{key, hardcode_rsa_key(3)}]}, + client_chain => + #{root => [{key, hardcode_rsa_key(1)}], + intermediates => [[{key, hardcode_rsa_key(3)}]], + peer => [{key, hardcode_rsa_key(2)}]}}), + + CaCertFile = filename:join(Dir, "server-cacerts.pem"), + CertFile = filename:join(Dir, "server-cert.pem"), + KeyFile = filename:join(Dir, "server-key.pem"), + + CAs = proplists:get_value(cacerts, ServerConf), + Cert = proplists:get_value(cert, ServerConf), + Key = proplists:get_value(key, ServerConf), + der_to_pem(CertFile, [cert_entry(Cert)]), + der_to_pem(KeyFile, [key_entry(Key)]), + der_to_pem(CaCertFile, ca_entries(CAs)). + +cert_entry(Cert) -> + {'Certificate', Cert, not_encrypted}. + +key_entry({'RSAPrivateKey', DERKey}) -> + {'RSAPrivateKey', DERKey, not_encrypted}; +key_entry({'DSAPrivateKey', DERKey}) -> + {'DSAPrivateKey', DERKey, not_encrypted}; +key_entry({'ECPrivateKey', DERKey}) -> + {'ECPrivateKey', DERKey, not_encrypted}. + +ca_entries(CAs) -> + [{'Certificate', CACert, not_encrypted} || CACert <- CAs]. + +der_to_pem(File, Entries) -> + PemBin = public_key:pem_encode(Entries), + file:write_file(File, PemBin). + +hardcode_rsa_key(1) -> + #'RSAPrivateKey'{ + version = 'two-prime', + modulus = +23995666614853919027835084074500048897452890537492185072956789802729257783422306095699263934587064480357348855732149402060270996295002843755712064937715826848741191927820899197493902093529581182351132392364214171173881547273475904587683433713767834856230531387991145055273426806331200574039205571401702219159773947658558490957010003143162250693492642996408861265758000254664396313741422909188635443907373976005987612936763564996605457102336549804831742940035613780926178523017685712710473543251580072875247250504243621640157403744718833162626193206685233710319205099867303242759099560438381385658382486042995679707669, + publicExponent = 17, + privateExponent = +11292078406990079542510627799764728892919007311761028269626724613049062486316379339152594792746853873109340637991599718616598115903530750002688030558925094987642913848386305504703012749896273497577003478759630198199473669305165131570674557041773098755873191241407597673069847908861741446606684974777271632545629600685952292605647052193819136445675100211504432575554351515262198132231537860917084269870590492135731720141577986787033006338680118008484613510063003323516659048210893001173583018220214626635609151105287049126443102976056146630518124476470236027123782297108342869049542023328584384300970694412006494684657, +prime1 = +169371138592582642967021557955633494538845517070305333860805485424261447791289944610138334410987654265476540480228705481960508520379619587635662291973699651583489223555422528867090299996446070521801757353675026048850480903160224210802452555900007597342687137394192939372218903554801584969667104937092080815197, + prime2 = +141675062317286527042995673340952251894209529891636708844197799307963834958115010129693036021381525952081167155681637592199810112261679449166276939178032066869788822014115556349519329537177920752776047051833616197615329017439297361972726138285974555338480581117881706656603857310337984049152655480389797687577, + exponent1 = +119556097830058336212015217380447172615655659108450823901745048534772786676204666783627059584226579481512852103690850928442711896738555003036938088452023283470698275450886490965004917644550167427154181661417665446247398284583687678213495921811770068712485038160606780733330990744565824684470897602653233516609, + exponent2 = +41669135975672507953822256864985956439473391144599032012999352737636422046504414744027363535700448809435637398729893409470532385959317485048904982111185902020526124121798693043976273393287623750816484427009887116945685005129205106462566511260580751570141347387612266663707016855981760014456663376585234613993, + coefficient = +76837684977089699359024365285678488693966186052769523357232308621548155587515525857011429902602352279058920284048929101483304120686557782043616693940283344235057989514310975192908256494992960578961614059245280827077951132083993754797053182279229469590276271658395444955906108899267024101096069475145863928441, + otherPrimeInfos = asn1_NOVALUE}; + +hardcode_rsa_key(2) -> + #'RSAPrivateKey'{ + version = 'two-prime', + modulus = +21343679768589700771839799834197557895311746244621307033143551583788179817796325695589283169969489517156931770973490560582341832744966317712674900833543896521418422508485833901274928542544381247956820115082240721897193055368570146764204557110415281995205343662628196075590438954399631753508888358737971039058298703003743872818150364935790613286541190842600031570570099801682794056444451081563070538409720109449780410837763602317050353477918147758267825417201591905091231778937606362076129350476690460157227101296599527319242747999737801698427160817755293383890373574621116766934110792127739174475029121017282777887777, + publicExponent = 17, + privateExponent = +18832658619343853622211588088997845201745658451136447382185486691577805721584993260814073385267196632785528033211903435807948675951440868570007265441362261636545666919252206383477878125774454042314841278013741813438699754736973658909592256273895837054592950290554290654932740253882028017801960316533503857992358685308186680144968293076156011747178275038098868263178095174694099811498968993700538293188879611375604635940554394589807673542938082281934965292051746326331046224291377703201248790910007232374006151098976879987912446997911775904329728563222485791845480864283470332826504617837402078265424772379987120023773, + prime1 = +146807662748886761089048448970170315054939768171908279335181627815919052012991509112344782731265837727551849787333310044397991034789843793140419387740928103541736452627413492093463231242466386868459637115999163097726153692593711599245170083315894262154838974616739452594203727376460632750934355508361223110419, + prime2 = +145385325050081892763917667176962991350872697916072592966410309213561884732628046256782356731057378829876640317801978404203665761131810712267778698468684631707642938779964806354584156202882543264893826268426566901882487709510744074274965029453915224310656287149777603803201831202222853023280023478269485417083, + exponent1 = +51814469205489445090252393754177758254684624060673510353593515699736136004585238510239335081623236845018299924941168250963996835808180162284853901555621683602965806809675350150634081614988136541809283687999704622726877773856604093851236499993845033701707873394143336209718962603456693912094478414715725803677, + exponent2 = +51312467664734785681382706062457526359131540440966797517556579722433606376221663384746714140373192528191755406283051201483646739222992016094510128871300458249756331334105225772206172777487956446433115153562317730076172132768497908567634716277852432109643395464627389577600646306666889302334125933506877206029, + coefficient = +30504662229874176232343608562807118278893368758027179776313787938167236952567905398252901545019583024374163153775359371298239336609182249464886717948407152570850677549297935773605431024166978281486607154204888016179709037883348099374995148481968169438302456074511782717758301581202874062062542434218011141540, + otherPrimeInfos = asn1_NOVALUE}; + +hardcode_rsa_key(3) -> + #'RSAPrivateKey'{ + version = 'two-prime', + modulus = +25089040456112869869472694987833070928503703615633809313972554887193090845137746668197820419383804666271752525807484521370419854590682661809972833718476098189250708650325307850184923546875260207894844301992963978994451844985784504212035958130279304082438876764367292331581532569155681984449177635856426023931875082020262146075451989132180409962870105455517050416234175675478291534563995772675388370042873175344937421148321291640477650173765084699931690748536036544188863178325887393475703801759010864779559318631816411493486934507417755306337476945299570726975433250753415110141783026008347194577506976486290259135429, + publicExponent = 17, + privateExponent = +8854955455098659953931539407470495621824836570223697404931489960185796768872145882893348383311931058684147950284994536954265831032005645344696294253579799360912014817761873358888796545955974191021709753644575521998041827642041589721895044045980930852625485916835514940558187965584358347452650930302268008446431977397918214293502821599497633970075862760001650736520566952260001423171553461362588848929781360590057040212831994258783694027013289053834376791974167294527043946669963760259975273650548116897900664646809242902841107022557239712438496384819445301703021164043324282687280801738470244471443835900160721870265, + prime1 = +171641816401041100605063917111691927706183918906535463031548413586331728772311589438043965564336865070070922328258143588739626712299625805650832695450270566547004154065267940032684307994238248203186986569945677705100224518137694769557564475390859269797990555863306972197736879644001860925483629009305104925823, + prime2 +=146170909759497809922264016492088453282310383272504533061020897155289106805616042710009332510822455269704884883705830985184223718261139908416790475825625309815234508695722132706422885088219618698987115562577878897003573425367881351537506046253616435685549396767356003663417208105346307649599145759863108910523, + exponent1 = +60579464612132153154728441333538327425711971378777222246428851853999433684345266860486105493295364142377972586444050678378691780811632637288529186629507258781295583787741625893888579292084087601124818789392592131211843947578009918667375697196773859928702549128225990187436545756706539150170692591519448797349, + exponent2 = +137572620950115585809189662580789132500998007785886619351549079675566218169991569609420548245479957900898715184664311515467504676010484619686391036071176762179044243478326713135456833024206699951987873470661533079532774988581535389682358631768109586527575902839864474036157372334443583670210960715165278974609, + coefficient = +15068630434698373319269196003209754243798959461311186548759287649485250508074064775263867418602372588394608558985183294561315208336731894947137343239541687540387209051236354318837334154993136528453613256169847839789803932725339395739618592522865156272771578671216082079933457043120923342632744996962853951612, + otherPrimeInfos = asn1_NOVALUE}. diff --git a/lib/ftp/test/property_test/README b/lib/ftp/test/property_test/README new file mode 100644 index 0000000000..57602bf719 --- /dev/null +++ b/lib/ftp/test/property_test/README @@ -0,0 +1,12 @@ + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%%% %%% +%%% WARNING %%% +%%% %%% +%%% This is experimental code which may be changed or removed %%% +%%% anytime without any warning. %%% +%%% %%% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +The test in this directory are written assuming that the user has a QuickCheck license. They are to be run manually. Some may be possible to be run with other tools, e.g. PropEr. + diff --git a/lib/ftp/test/property_test/ftp_simple_client_server.erl b/lib/ftp/test/property_test/ftp_simple_client_server.erl new file mode 100644 index 0000000000..d304478b47 --- /dev/null +++ b/lib/ftp/test/property_test/ftp_simple_client_server.erl @@ -0,0 +1,307 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2004-2018. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% + +-module(ftp_simple_client_server). + +-compile(export_all). + +-ifndef(EQC). +-ifndef(PROPER). +-define(EQC,true). +%%-define(PROPER,true). +-endif. +-endif. + + +-ifdef(EQC). + +-include_lib("eqc/include/eqc.hrl"). +-include_lib("eqc/include/eqc_statem.hrl"). +-define(MOD_eqc, eqc). +-define(MOD_eqc_gen, eqc_gen). +-define(MOD_eqc_statem, eqc_statem). + +-else. +-ifdef(PROPER). + +-include_lib("proper/include/proper.hrl"). +-define(MOD_eqc, proper). +-define(MOD_eqc_gen, proper_gen). +-define(MOD_eqc_statem, proper_statem). + +-endif. +-endif. + +-record(state, { + initialized = false, + priv_dir, + data_dir, + servers = [], % [ {IP,Port,Userid,Pwd} ] + clients = [], % [ client_ref() ] + store = [] % [ {Name,Contents} ] + }). + +-define(fmt(F,A), io:format(F,A)). +%%-define(fmt(F,A), ok). + +-define(v(K,L), proplists:get_value(K,L)). + +%%%================================================================ +%%% +%%% Properties +%%% + +%% This function is for normal eqc calls: +prop_ftp() -> + {ok,PWD} = file:get_cwd(), + prop_ftp(filename:join([PWD,?MODULE_STRING++"_data"]), + filename:join([PWD,?MODULE_STRING,"_files"])). + +%% This function is for calls from common_test test cases: +prop_ftp(Config) -> + prop_ftp(filename:join([?v(property_dir,Config), ?MODULE_STRING++"_data"]), + ?v(priv_dir,Config) ). + + +prop_ftp(DataDir, PrivDir) -> + S0 = #state{data_dir = DataDir, + priv_dir = PrivDir}, + ?FORALL(Cmds, more_commands(10,commands(?MODULE,S0)), + aggregate(command_names(Cmds), + begin {_H,S,Result} = run_commands(?MODULE,Cmds), + % io:format('**** Result=~p~n',[Result]), + % io:format('**** S=~p~n',[S]), + % io:format('**** _H=~p~n',[_H]), + % io:format('**** Cmds=~p~n',[Cmds]), + [cmnd_stop_server(X) || X <- S#state.servers], + [ftp:stop_service(X) || {ok,X} <- S#state.clients], + Result==ok + end) + ). + +%%%================================================================ +%%% +%%% State model +%%% + +%% @doc Returns the state in which each test case starts. (Unless a different +%% initial state is supplied explicitly to, e.g. commands/2.) +-spec initial_state() ->?MOD_eqc_statem:symbolic_state(). +initial_state() -> + ?fmt("Initial_state()~n",[]), + #state{}. + +%% @doc Command generator, S is the current state +-spec command(S :: ?MOD_eqc_statem:symbolic_state()) -> ?MOD_eqc_gen:gen(eqc_statem:call()). + +command(#state{initialized=false, + priv_dir=PrivDir}) -> + {call,?MODULE,cmnd_init,[PrivDir]}; + +command(#state{servers=[], + priv_dir=PrivDir, + data_dir=DataDir}) -> + {call,?MODULE,cmnd_start_server,[PrivDir,DataDir]}; + +command(#state{servers=Ss=[_|_], + clients=[]}) -> + {call,?MODULE,cmnd_start_client,[oneof(Ss)]}; + +command(#state{servers=Ss=[_|_], + clients=Cs=[_|_], + store=Store=[_|_] + }) -> + frequency([ + { 5, {call,?MODULE,cmnd_start_client,[oneof(Ss)]}}, + { 5, {call,?MODULE,cmnd_stop_client,[oneof(Cs)]}}, + {10, {call,?MODULE,cmnd_put,[oneof(Cs),file_path(),file_contents()]}}, + {20, {call,?MODULE,cmnd_get,[oneof(Cs),oneof(Store)]}}, + {10, {call,?MODULE,cmnd_delete,[oneof(Cs),oneof(Store)]}} + ]); + +command(#state{servers=Ss=[_|_], + clients=Cs=[_|_], + store=[] + }) -> + frequency([ + {5, {call,?MODULE,cmnd_start_client,[oneof(Ss)]}}, + {5, {call,?MODULE,cmnd_stop_client,[oneof(Cs)]}}, + {10, {call,?MODULE,cmnd_put,[oneof(Cs),file_path(),file_contents()]}} + ]). + +%% @doc Precondition, checked before command is added to the command sequence. +-spec precondition(S :: ?MOD_eqc_statem:symbolic_state(), C :: ?MOD_eqc_statem:call()) -> boolean(). + +precondition(#state{clients=Cs}, {call, _, cmnd_put, [C,_,_]}) -> lists:member(C,Cs); + +precondition(#state{clients=Cs, store=Store}, + {call, _, cmnd_get, [C,X]}) -> lists:member(C,Cs) andalso lists:member(X,Store); + +precondition(#state{clients=Cs, store=Store}, + {call, _, cmnd_delete, [C,X]}) -> lists:member(C,Cs) andalso lists:member(X,Store); + +precondition(#state{servers=Ss}, {call, _, cmnd_start_client, _}) -> Ss =/= []; + +precondition(#state{clients=Cs}, {call, _, cmnd_stop_client, [C]}) -> lists:member(C,Cs); + +precondition(#state{initialized=IsInit}, {call, _, cmnd_init, _}) -> IsInit==false; + +precondition(_S, {call, _, _, _}) -> true. + + +%% @doc Postcondition, checked after command has been evaluated +%% Note: S is the state before next_state(S,_,C) +-spec postcondition(S :: ?MOD_eqc_statem:dynamic_state(), C :: ?MOD_eqc_statem:call(), + Res :: term()) -> boolean(). + +postcondition(_S, {call, _, cmnd_get, [_,{_Name,Expected}]}, {ok,Value}) -> + Value == Expected; + +postcondition(S, {call, _, cmnd_delete, [_,{Name,_Expected}]}, ok) -> + ?fmt("file:read_file(..) = ~p~n",[file:read_file(filename:join(S#state.priv_dir,Name))]), + {error,enoent} == file:read_file(filename:join(S#state.priv_dir,Name)); + +postcondition(S, {call, _, cmnd_put, [_,Name,Value]}, ok) -> + {ok,Bin} = file:read_file(filename:join(S#state.priv_dir,Name)), + Bin == unicode:characters_to_binary(Value); + +postcondition(_S, {call, _, cmnd_stop_client, _}, ok) -> true; + +postcondition(_S, {call, _, cmnd_start_client, _}, {ok,_}) -> true; + +postcondition(_S, {call, _, cmnd_init, _}, ok) -> true; + +postcondition(_S, {call, _, cmnd_start_server, _}, {ok,_}) -> true. + + +%% @doc Next state transformation, S is the current state. Returns next state. +-spec next_state(S :: ?MOD_eqc_statem:symbolic_state(), + V :: ?MOD_eqc_statem:var(), + C :: ?MOD_eqc_statem:call()) -> ?MOD_eqc_statem:symbolic_state(). + +next_state(S, _V, {call, _, cmnd_put, [_,Name,Val]}) -> + S#state{store = [{Name,Val} | lists:keydelete(Name,1,S#state.store)]}; + +next_state(S, _V, {call, _, cmnd_delete, [_,{Name,_Val}]}) -> + S#state{store = lists:keydelete(Name,1,S#state.store)}; + +next_state(S, V, {call, _, cmnd_start_client, _}) -> + S#state{clients = [V | S#state.clients]}; + +next_state(S, V, {call, _, cmnd_start_server, _}) -> + S#state{servers = [V | S#state.servers]}; + +next_state(S, _V, {call, _, cmnd_stop_client, [C]}) -> + S#state{clients = S#state.clients -- [C]}; + +next_state(S, _V, {call, _, cmnd_init, _}) -> + S#state{initialized=true}; + +next_state(S, _V, {call, _, _, _}) -> + S. + +%%%================================================================ +%%% +%%% Data model +%%% + +file_path() -> non_empty(list(alphanum_char())). +%%file_path() -> non_empty( list(oneof([alphanum_char(), utf8_char()])) ). + +%%file_contents() -> list(alphanum_char()). +file_contents() -> list(oneof([alphanum_char(), utf8_char()])). + +alphanum_char() -> oneof(lists:seq($a,$z) ++ lists:seq($A,$Z) ++ lists:seq($0,$9)). + +utf8_char() -> oneof("åäöÅÄÖ話话カタカナひらがな"). + +%%%================================================================ +%%% +%%% Commands doing something with the System Under Test +%%% + +cmnd_init(PrivDir) -> + ?fmt('Call cmnd_init(~p)~n',[PrivDir]), + os:cmd("killall vsftpd"), + clear_files(PrivDir), + ok. + +cmnd_start_server(PrivDir, DataDir) -> + ?fmt('Call cmnd_start_server(~p, ~p)~n',[PrivDir,DataDir]), + Cmnd = ["vsftpd ", filename:join(DataDir,"vsftpd.conf"), + " -oftpd_banner=erlang_otp_testing" + " -oanon_root=",PrivDir + ], + ?fmt("Cmnd=~s~n",[Cmnd]), + case os:cmd(Cmnd) of + [] -> + {ok,{"localhost",9999,"ftp","[email protected]"}}; + Other -> + {error,Other} + end. + +cmnd_stop_server({ok,{_Host,Port,_Usr,_Pwd}}) -> + os:cmd("kill `netstat -tpln | grep "++integer_to_list(Port)++" | awk '{print $7}' | awk -F/ '{print $1}'`"). + +cmnd_start_client({ok,{Host,Port,Usr,Pwd}}) -> + ?fmt('Call cmnd_start_client(~p)...',[{Host,Port,Usr,Pwd}]), + case ftp:start_service([{host,Host},{port,Port}]) of + {ok,Client} -> + ?fmt("~p...",[{ok,Client}]), + case ftp:user(Client, Usr, Pwd) of + ok -> + ?fmt("OK!~n",[]), + {ok,Client}; + Other -> + ?fmt("Other1=~p~n",[Other]), + ftp:stop_service(Client), Other + end; + Other -> + ?fmt("Other2=~p~n",[Other]), + Other + end. + +cmnd_stop_client({ok,Client}) -> + ?fmt('Call cmnd_stop_client(~p)~n',[Client]), + ftp:stop_service(Client). %% -> ok | Other + +cmnd_delete({ok,Client}, {Name,_ExpectedValue}) -> + ?fmt('Call cmnd_delete(~p, ~p)~n',[Client,Name]), + R=ftp:delete(Client, Name), + ?fmt("R=~p~n",[R]), + R. + +cmnd_put({ok,Client}, Name, Value) -> + ?fmt('Call cmnd_put(~p, ~p, ~p)...',[Client, Name, Value]), + R = ftp:send_bin(Client, unicode:characters_to_binary(Value), Name), % ok | {error,Error} + ?fmt('~p~n',[R]), + R. + +cmnd_get({ok,Client}, {Name,_ExpectedValue}) -> + ?fmt('Call cmnd_get(~p, ~p)~n',[Client,Name]), + case ftp:recv_bin(Client, Name) of + {ok,Bin} -> {ok, unicode:characters_to_list(Bin)}; + Other -> Other + end. + + +clear_files(Dir) -> + os:cmd(["rm -fr ",filename:join(Dir,"*")]). diff --git a/lib/ftp/test/property_test/ftp_simple_client_server_data/vsftpd.conf b/lib/ftp/test/property_test/ftp_simple_client_server_data/vsftpd.conf new file mode 100644 index 0000000000..fd48e2abf0 --- /dev/null +++ b/lib/ftp/test/property_test/ftp_simple_client_server_data/vsftpd.conf @@ -0,0 +1,26 @@ + +### +### Some parameters are given in the vsftpd start command. +### +### Typical command-line paramters are such that has a file path +### component like cert files. +### + + +listen=YES +listen_port=9999 +run_as_launching_user=YES +ssl_enable=NO +#allow_anon_ssl=YES + +background=YES + +write_enable=YES +anonymous_enable=YES +anon_upload_enable=YES +anon_mkdir_write_enable=YES +anon_other_write_enable=YES +anon_world_readable_only=NO + +### Shouldn't be necessary.... +require_ssl_reuse=NO diff --git a/lib/ftp/vsn.mk b/lib/ftp/vsn.mk new file mode 100644 index 0000000000..9f14658099 --- /dev/null +++ b/lib/ftp/vsn.mk @@ -0,0 +1,24 @@ +#-*-makefile-*- ; force emacs to enter makefile-mode + +# %CopyrightBegin% +# +# Copyright Ericsson AB 2001-2018. All Rights Reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# %CopyrightEnd% + +APPLICATION = ftp +FTP_VSN = 1.0.2 +PRE_VSN = +APP_VSN = "$(APPLICATION)-$(FTP_VSN)$(PRE_VSN)" |