aboutsummaryrefslogtreecommitdiffstats
path: root/lib/inets/examples/server_root/conf/httpd.conf
diff options
context:
space:
mode:
Diffstat (limited to 'lib/inets/examples/server_root/conf/httpd.conf')
-rw-r--r--lib/inets/examples/server_root/conf/httpd.conf268
1 files changed, 268 insertions, 0 deletions
diff --git a/lib/inets/examples/server_root/conf/httpd.conf b/lib/inets/examples/server_root/conf/httpd.conf
new file mode 100644
index 0000000000..8a74ed1afd
--- /dev/null
+++ b/lib/inets/examples/server_root/conf/httpd.conf
@@ -0,0 +1,268 @@
+#
+# %CopyrightBegin%
+#
+# Copyright Ericsson AB 1997-2009. All Rights Reserved.
+#
+# The contents of this file are subject to the Erlang Public License,
+# Version 1.1, (the "License"); you may not use this file except in
+# compliance with the License. You should have received a copy of the
+# Erlang Public License along with this software. If not, it can be
+# retrieved online at http://www.erlang.org/.
+#
+# Software distributed under the License is distributed on an "AS IS"
+# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+# the License for the specific language governing rights and limitations
+# under the License.
+#
+# %CopyrightEnd%
+#
+#
+
+# Port: The port the standalone listens to. For ports < 1023, you will
+# need httpd to be run as root initially.
+
+Port 8888
+
+# BindAddress: This directive is used to tell the server which IP address
+# to listen to. It can either contain "*", an IP address, or a fully
+# qualified Internet domain name.
+#
+# It is also possible to specify the ip-family with the directive.
+# There ar three possible value: inet, inet6 and inet6fb4
+# inet: Use IpFamily inet when retreiving the address and
+# fail if that does not work.
+# inet6: Use IpFamily inet6 when retreiving the address and
+# fail if that does not work.
+# inet6fb4: First IpFamily inet6 is tried and if that does not work,
+# inet is used as fallback.
+# Default value for ip-family is inet6fb4
+#
+# The syntax is: <address>[|<ip-family>]
+#
+#BindAddress *
+#BindAddress *|inet
+
+
+# ServerName allows you to set a host name which is sent back to clients for
+# your server if it's different than the one the program would get (i.e. use
+# "www" instead of the host's real name).
+#
+# Note: You cannot just invent host names and hope they work. The name you
+# define here must be a valid DNS name for your host. If you don't understand
+# this, ask your network administrator.
+
+#ServerName your.server.net
+
+# SocketType is either ip_comm, sockets or ssl.
+
+SocketType ip_comm
+
+# Modules: Server run-time plug-in modules written using the Erlang
+# Web Server API (EWSAPI). The server API make it easy to add functionality
+# to the server. Read more about EWSAPI in the Reference Manual.
+# WARNING! Do not tamper with this directive unless you are familiar with
+# EWSAPI.
+
+Modules mod_alias mod_auth mod_esi mod_actions mod_cgi mod_responsecontrol mod_trace mod_range mod_head mod_include mod_dir mod_get mod_log mod_disk_log
+
+# ServerAdmin: Your address, where problems with the server should be
+# e-mailed.
+
+ServerAdmin [email protected]
+
+# ServerRoot: The directory the server's config, error, and log files
+# are kept in
+
+ServerRoot /var/tmp/server_root
+
+# ErrorLog: The location of the error log file. If this does not start
+# with /, ServerRoot is prepended to it.
+
+ErrorLog logs/error_log
+
+# TransferLog: The location of the transfer log file. If this does not
+# start with /, ServerRoot is prepended to it.
+
+TransferLog logs/access_log
+
+# SecurityLog: The location of the security log file (mod_security required)
+#
+SecurityLog logs/security_log
+
+# ErrorDiskLog: The location of the error log file. If this does not
+# start with /, ServerRoot is prepended to it. This log file is managed
+# with the disk_log module [See disk_log(3)]. The ErrorDiskLogSize directive
+# takes two argument, i.e. MaxBytes and MaxFiles. The wrap log writes at most
+# MaxBytes bytes on each file, and it uses MaxFiles files before it wraps, and
+# truncates the first file.
+
+ErrorDiskLog logs/error_disk_log
+ErrorDiskLogSize 200000 10
+
+# TransferDiskLog: The location of the transfer log file. If this does not
+# start with /, ServerRoot is prepended to it. This log file is managed
+# with the disk_log module [See disk_log(3)]. The TransferDiskLogSize directive
+# takes two argument, i.e. MaxBytes and MaxFiles. The wrap log writes at most
+# MaxBytes bytes on each file, and it uses MaxFiles files before it wraps, and
+# truncates the first file.
+
+TransferDiskLog logs/access_disk_log
+TransferDiskLogSize 200000 10
+
+# SecurityDiskLog: The location of the security log file. If this does not
+# start with /, ServerRoot is prepended to it. This log file is managed
+# with the disk_log module [See disk_log(3)]. The SecurityDiskLogSize directive
+# takes two argument, i.e. MaxBytes and MaxFiles. The wrap log writes at most
+# MaxBytes bytes on each file, and it uses MaxFiles files before it wraps, and
+# truncates the first file.
+
+SecurityDiskLog logs/security_disk_log
+SecurityDiskLogSize 200000 10
+
+# Limit on total number of servers running, i.e., limit on the number
+# of clients who can simultaneously connect --- if this limit is ever
+# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
+# It is intended mainly as a brake to keep a runaway server from taking
+# the server with it as it spirals down...
+
+MaxClients 50
+
+# KeepAlive set the flag for persistent connections. For peristent connections
+# set KeepAlive to on. To use One request per connection set the flag to off
+# Note: The value has changed since previous version of INETS.
+KeepAlive on
+
+# KeepAliveTimeout sets the number of seconds before a persistent connection
+# times out and closes.
+KeepAliveTimeout 10
+
+# MaxKeepAliveRequests sets the number of seconds before a persistent connection
+# times out and closes.
+MaxKeepAliveRequests 10
+
+
+
+# DocumentRoot: The directory out of which you will serve your
+# documents. By default, all requests are taken from this directory, but
+# symbolic links and aliases may be used to point to other locations.
+
+DocumentRoot /var/tmp/server_root/htdocs
+
+# DirectoryIndex: Name of the file or files to use as a pre-written HTML
+# directory index. Separate multiple entries with spaces.
+
+DirectoryIndex index.html welcome.html
+
+# DefaultType is the default MIME type for documents which the server
+# cannot find the type of from filename extensions.
+
+DefaultType text/plain
+
+# Aliases: Add here as many aliases as you need (with no limit). The format is
+# Alias fakename realname
+
+Alias /icons/ /var/tmp/server_root/icons/
+Alias /pics/ /var/tmp/server_root/icons/
+
+# ScriptAlias: This controls which directories contain server scripts.
+# Format: ScriptAlias fakename realname
+
+ScriptAlias /cgi-bin/ /var/tmp/server_root/cgi-bin/
+ScriptAlias /htbin/ /var/tmp/server_root/cgi-bin/
+
+# This directive adds an action, which will activate cgi-script when a
+# file is requested using the method of method, which can be one of
+# GET, POST and HEAD. It sends the URL and file path of the requested
+# document using the standard CGI PATH_INFO and PATH_TRANSLATED
+# environment variables.
+
+#Script HEAD /cgi-bin/printenv.sh
+
+# This directive adds an action, which will activate cgi-script when a
+# file of content type mime-type is requested. It sends the URL and
+# file path of the requested document using the standard CGI PATH_INFO
+# and PATH_TRANSLATED environment variables.
+
+#Action image/gif /cgi-bin/printenv.sh
+
+# ErlScriptAlias: This specifies how "Erl" server scripts are called.
+# Format: ErlScriptAlias fakename realname allowed_modules
+
+ErlScriptAlias /down/erl httpd_example io
+
+# EvalScriptAlias: This specifies how "Eval" server scripts are called.
+# Format: EvalScriptAlias fakename realname allowed_modules
+
+EvalScriptAlias /eval httpd_example io
+
+# Point SSLCertificateFile at a PEM encoded certificate.
+
+SSLCertificateFile /var/tmp/server_root/ssl/ssl_server.pem
+
+# If the key is not combined with the certificate, use this directive to
+# point at the key file.
+
+SSLCertificateKeyFile /var/tmp/server_root/ssl/ssl_server.pem
+
+# Set SSLVerifyClient to:
+# 0 if no certicate is required
+# 1 if the client may present a valid certificate
+# 2 if the client must present a valid certificate
+# 3 if the client may present a valid certificate but it is not required to
+# have a valid CA
+
+SSLVerifyClient 0
+
+# Each directory to which INETS has access, can be configured with respect
+# to which services and features are allowed and/or disabled in that
+# directory (and its subdirectories).
+
+<Directory /var/tmp/server_root/htdocs/open>
+AuthDBType plain
+AuthName Open Area
+AuthUserFile /var/tmp/server_root/auth/passwd
+AuthGroupFile /var/tmp/server_root/auth/group
+require user one Aladdin
+</Directory>
+
+<Directory /var/tmp/server_root/htdocs/secret>
+AuthDBType plain
+AuthName Secret Area
+AuthUserFile /var/tmp/server_root/auth/passwd
+AuthGroupFile /var/tmp/server_root/auth/group
+require group group1 group2
+</Directory>
+
+<Directory /var/tmp/server_root/htdocs/secret/top_secret>
+AuthDBType plain
+AuthName Top Secret Area
+AuthUserFile /var/tmp/server_root/auth/passwd
+AuthGroupFile /var/tmp/server_root/auth/group
+require group group3
+</Directory>
+
+<Directory /var/tmp/server_root/htdocs/mnesia_open>
+AuthDBType mnesia
+AuthName Open Area
+require user one Aladdin
+</Directory>
+
+<Directory /var/tmp/server_root/htdocs/mnesia_secret>
+AuthDBType mnesia
+AuthName Secret Area
+require group group1 group2
+</Directory>
+
+<Directory /var/tmp/server_root/htdocs/mnesia_secret/top_secret>
+AuthDBType mnesia
+AuthName Top Secret Area
+require group group3
+allow from 130.100.34 130.100.35
+deny from 100.234.22.12 194.100.34.1 130.100.34.25
+SecurityDataFile logs/security_data
+SecurityMaxRetries 3
+SecurityBlockTime 10
+SecurityFailExpireTime 1
+SecurityAuthTimeout 1
+SecurityCallbackModule security_callback
+</Directory>