diff options
Diffstat (limited to 'lib/inets/src/tftp/tftp.erl')
| -rw-r--r-- | lib/inets/src/tftp/tftp.erl | 398 |
1 files changed, 0 insertions, 398 deletions
diff --git a/lib/inets/src/tftp/tftp.erl b/lib/inets/src/tftp/tftp.erl deleted file mode 100644 index c8804ea55f..0000000000 --- a/lib/inets/src/tftp/tftp.erl +++ /dev/null @@ -1,398 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2005-2016. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% -%% - -%%%------------------------------------------------------------------- -%%% File : tftp.erl -%%% Author : Hakan Mattsson <[email protected]> -%%% Description : Trivial FTP -%%% Created : 18 May 2004 by Hakan Mattsson <[email protected]> -%%%------------------------------------------------------------------- -%%% -%%% This is a complete implementation of the following IETF standards: -%%% -%%% RFC 1350, The TFTP Protocol (revision 2). -%%% RFC 2347, TFTP Option Extension. -%%% RFC 2348, TFTP Blocksize Option. -%%% RFC 2349, TFTP Timeout Interval and Transfer Size Options. -%%% -%%% The only feature that not is implemented in this release is -%%% the "netascii" transfer mode. -%%% -%%% The start/1 function starts a daemon process which, listens for -%%% UDP packets on a port. When it receives a request for read or -%%% write it spawns a temporary server process which handles the -%%% actual transfer of the file. On the client side the read_file/3 -%%% and write_file/3 functions spawns a temporary client process which -%%% establishes contact with a TFTP daemon and performs the actual -%%% transfer of the file. -%%% -%%% Most of the options are common for both the client and the server -%%% side, but some of them differs a little. Here are the available -%%% options: -%%% -%%% {debug, Level} -%%% -%%% Level = none | error | warning brief | normal | verbose | all -%%% -%%% Controls the level of debug printouts. The default is none. -%%% -%%% {host, Host} -%%% -%%% The name or IP address of the host where the TFTP daemon -%%% resides. This option is only used by the client. See -%%% 'inet' about valid host names. -%%% -%%% {port, Port} -%%% -%%% Port = integer() -%%% -%%% The TFTP port where the daemon listens. It defaults to the -%%% standardized number 69. On the server side it may sometimes -%%% make sense to set it to 0, which means that the daemon just -%%% will pick a free port (which is returned by the start/1 -%%% function). -%%% -%%% If a socket has somehow already has been connected, the -%%% {udp, [{fd, integer()}]} option can be used to pass the -%%% open file descriptor to gen_udp. This can be automated -%%% a bit by using a command line argument stating the -%%% prebound file descriptor number. For example, if the -%%% Port is 69 and the file descriptor 22 has been opened by -%%% setuid_socket_wrap. Then the command line argument -%%% "-tftpd_69 22" will trigger the prebound file -%%% descriptor 22 to be used instead of opening port 69. -%%% The UDP option {udp, [{fd, 22}]} autmatically be added. -%%% See init:get_argument/ about command line arguments and -%%% gen_udp:open/2 about UDP options. -%%% -%%% {port_policy, Policy} -%%% -%%% Policy = random | Port | {range, MinPort, MaxPort} -%%% Port = MinPort = MaxPort = integer() -%%% -%%% Policy for the selection of the temporary port which is used -%%% by the server/client during the file transfer. It defaults to -%%% 'random' which is the standardized policy. With this policy a -%%% randomized free port used. A single port or a range of ports -%%% can be useful if the protocol should pass thru a firewall. -%%% -%%% {prebound_fd, InitArgFlag} -%%% -%%% InitArgFlag = atom() -%%% -%%% If a socket has somehow already has been connected, the -%%% {udp, [{fd, integer()}]} option can be used to pass the -%%% open file descriptor to gen_udp. -%%% -%%% The prebound_fd option makes it possible to pass give the -%%% file descriptor as a command line argument. The typical -%%% usage is when used in conjunction with setuid_socket_wrap -%%% to be able to open privileged sockets. For example if the -%%% file descriptor 22 has been opened by setuid_socket_wrap -%%% and you have choosen my_tftp_fd as init argument, the -%%% command line should like this "erl -my_tftp_fd 22" and -%%% FileDesc should be set to my_tftpd_fd. This would -%%% automatically imply {fd, 22} to be set as UDP option. -%%% -%%% {udp, UdpOptions} -%%% -%%% Options to gen_udp:open/2. -%%% -%%% {use_tsize, Bool} -%%% -%%% Bool = boolean() -%%% -%%% Flag for automated usage of the "tsize" option. With this set -%%% to true, the write_file/3 client will determine the filesize -%%% and send it to the server as the standardized "tsize" option. -%%% A read_file/3 client will just acquire filesize from the -%%% server by sending a zero "tsize". -%%% -%%% {max_tsize, MaxTsize} -%%% -%%% MaxTsize = integer() | infinity -%%% -%%% Threshold for the maximal filesize in bytes. The transfer will -%%% be aborted if the limit is exceeded. It defaults to -%%% 'infinity'. -%%% -%%% {max_conn, MaxConn} -%%% -%%% MaxConn = integer() | infinity -%%% -%%% Threshold for the maximal number of active connections. The -%%% daemon will reject the setup of new connections if the limit -%%% is exceeded. It defaults to 'infinity'. -%%% -%%% {TftpKey, TftpVal} -%%% -%%% TftpKey = string() -%%% TftpVal = string() -%%% -%%% The name and value of a TFTP option. -%%% -%%% {reject, Feature} -%%% -%%% Feature = Mode | TftpKey -%%% Mode = read | write -%%% TftpKey = string() -%%% -%%% Control which features that should be rejected. -%%% This is mostly useful for the server as it may restrict -%%% usage of certain TFTP options or read/write access. -%%% -%%% {callback, {RegExp, Module, State}} -%%% -%%% RegExp = string() -%%% Module = atom() -%%% State = term() -%%% -%%% Registration of a callback module. When a file is to be -%%% transferred, its local filename will be matched to the -%%% regular expressions of the registered callbacks. The first -%%% matching callback will be used the during the transfer.The -%%% callback module must implement the 'tftp' behaviour. -%%% -%%% On the server side the callback interaction starts with a -%%% call to open/5 with the registered initial callback -%%% state. open/5 is expected to open the (virtual) file. Then -%%% either the read/1 or write/2 functions are invoked -%%% repeatedly, once per transfererred block. At each function -%%% call the state returned from the previous call is -%%% obtained. When the last block has been encountered the read/1 -%%% or write/2 functions is expected to close the (virtual) -%%% file.and return its last state. The abort/3 function is only -%%% used in error situations. prepare/5 is not used on the server -%%% side. -%%% -%%% On the client side the callback interaction is the same, but -%%% it starts and ends a bit differently. It starts with a call -%%% to prepare/5 with the same arguments as open/5 -%%% takes. prepare/5 is expected to validate the TFTP options, -%%% suggested by the user and return the subset of them that it -%%% accepts. Then the options is sent to the server which will -%%% perform the same TFTP option negotiation procedure. The -%%% options that are accepted by the server is forwarded to the -%%% open/5 function on the client side. On the client side the -%%% open/5 function must accept all option as is or reject the -%%% transfer. Then the callback interaction follows the same -%%% pattern as described above for the server side. When the last -%%% block is encountered in read/1 or write/2 the returned stated -%%% is forwarded to the user and returned from read_file/3 or -%%% write_file/3. -%%%------------------------------------------------------------------- - --module(tftp). - -%%------------------------------------------------------------------- -%% Interface -%%------------------------------------------------------------------- - -%% Public functions --export([ - read_file/3, - write_file/3, - start/1, - info/1, - change_config/2, - start/0 - ]). - -%% Application local functions --export([ - start_standalone/1, - start_service/1, - stop_service/1, - services/0, - service_info/1 - ]). - - --type peer() :: {PeerType :: inet | inet6, - PeerHost :: inet:ip_address(), - PeerPort :: port()}. - --type access() :: read | write. - --type options() :: [{Key :: string(), Value :: string()}]. - --type error_code() :: undef | enoent | eacces | enospc | - badop | eexist | baduser | badopt | - integer(). - --callback prepare(Peer :: peer(), - Access :: access(), - Filename :: file:name(), - Mode :: string(), - SuggestedOptions :: options(), - InitialState :: [] | [{root_dir, string()}]) -> - {ok, AcceptedOptions :: options(), NewState :: term()} | - {error, {Code :: error_code(), string()}}. - --callback open(Peer :: peer(), - Access :: access(), - Filename :: file:name(), - Mode :: string(), - SuggestedOptions :: options(), - State :: [] | [{root_dir, string()}] | term()) -> - {ok, AcceptedOptions :: options(), NewState :: term()} | - {error, {Code :: error_code(), string()}}. - --callback read(State :: term()) -> {more, binary(), NewState :: term()} | - {last, binary(), integer()} | - {error, {Code :: error_code(), string()}}. - --callback write(binary(), State :: term()) -> - {more, NewState :: term()} | - {last, FileSize :: integer()} | - {error, {Code :: error_code(), string()}}. - --callback abort(Code :: error_code(), string(), State :: term()) -> 'ok'. - --include("tftp.hrl"). - - -%%------------------------------------------------------------------- -%% read_file(RemoteFilename, LocalFilename, Options) -> -%% {ok, LastCallbackState} | {error, Reason} -%% -%% RemoteFilename = string() -%% LocalFilename = binary | string() -%% Options = [option()] -%% LastCallbackState = term() -%% Reason = term() -%% -%% Reads a (virtual) file from a TFTP server -%% -%% If LocalFilename is the atom 'binary', tftp_binary will be used as -%% callback module. It will concatenate all transferred blocks and -%% return them as one single binary in the CallbackState. -%% -%% When LocalFilename is a string, it will be matched to the -%% registered callback modules and hopefully one of them will be -%% selected. By default, tftp_file will be used as callback module. It -%% will write each transferred block to the file named -%% LocalFilename. The number of transferred bytes will be returned as -%% LastCallbackState. -%%------------------------------------------------------------------- - -read_file(RemoteFilename, LocalFilename, Options) -> - tftp_engine:client_start(read, RemoteFilename, LocalFilename, Options). - -%%------------------------------------------------------------------- -%% write(RemoteFilename, LocalFilename, Options) -> -%% {ok, LastCallbackState} | {error, Reason} -%% -%% RemoteFilename = string() -%% LocalFilename = binary() | string() -%% Options = [option()] -%% LastCallbackState = term() -%% Reason = term() -%% -%% Writes a (virtual) file to a TFTP server -%% -%% If LocalFilename is a binary, tftp_binary will be used as callback -%% module. The binary will be transferred block by block and the number -%% of transferred bytes will be returned as LastCallbackState. -%% -%% When LocalFilename is a string, it will be matched to the -%% registered callback modules and hopefully one of them will be -%% selected. By default, tftp_file will be used as callback module. It -%% will read the file named LocalFilename block by block. The number -%% of transferred bytes will be returned as LastCallbackState. -%%------------------------------------------------------------------- - -write_file(RemoteFilename, LocalFilename, Options) -> - tftp_engine:client_start(write, RemoteFilename, LocalFilename, Options). - -%%------------------------------------------------------------------- -%% start(Options) -> {ok, Pid} | {error, Reason} -%% -%% Options = [option()] -%% Pid = pid() -%% Reason = term() -%% -%% Starts a daemon process which listens for udp packets on a -%% port. When it receives a request for read or write it spawns -%% a temporary server process which handles the actual transfer -%% of the (virtual) file. -%%------------------------------------------------------------------- - -start(Options) -> - tftp_engine:daemon_start(Options). - -%%------------------------------------------------------------------- -%% info(Pid) -> {ok, Options} | {error, Reason} -%% -%% Options = [option()] -%% Reason = term() -%% -%% Returns info about a tftp daemon, server or client process -%%------------------------------------------------------------------- - -info(Pid) -> - tftp_engine:info(Pid). - -%%------------------------------------------------------------------- -%% change_config(Pid, Options) -> ok | {error, Reason} -%% -%% Options = [option()] -%% Reason = term() -%% -%% Changes config for a tftp daemon, server or client process -%% Must be used with care. -%%------------------------------------------------------------------- - -change_config(Pid, Options) -> - tftp_engine:change_config(Pid, Options). - -%%------------------------------------------------------------------- -%% start() -> ok | {error, Reason} -%% -%% Reason = term() -%% -%% Start the application -%%------------------------------------------------------------------- - -start() -> - application:start(inets). - -%%------------------------------------------------------------------- -%% Inets service behavior -%%------------------------------------------------------------------- - -start_standalone(Options) -> - start(Options). - -start_service(Options) -> - tftp_sup:start_child(Options). - -stop_service(Pid) -> - tftp_sup:stop_child(Pid). - -services() -> - tftp_sup:which_children(). - -service_info(Pid) -> - info(Pid). - - - |