aboutsummaryrefslogtreecommitdiffstats
path: root/lib/inets/test/ftp_format_SUITE.erl
diff options
context:
space:
mode:
Diffstat (limited to 'lib/inets/test/ftp_format_SUITE.erl')
-rw-r--r--lib/inets/test/ftp_format_SUITE.erl328
1 files changed, 0 insertions, 328 deletions
diff --git a/lib/inets/test/ftp_format_SUITE.erl b/lib/inets/test/ftp_format_SUITE.erl
deleted file mode 100644
index 95d594a44b..0000000000
--- a/lib/inets/test/ftp_format_SUITE.erl
+++ /dev/null
@@ -1,328 +0,0 @@
-%%
-%% %CopyrightBegin%
-%%
-%% Copyright Ericsson AB 2005-2016. All Rights Reserved.
-%%
-%% Licensed under the Apache License, Version 2.0 (the "License");
-%% you may not use this file except in compliance with the License.
-%% You may obtain a copy of the License at
-%%
-%% http://www.apache.org/licenses/LICENSE-2.0
-%%
-%% Unless required by applicable law or agreed to in writing, software
-%% distributed under the License is distributed on an "AS IS" BASIS,
-%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-%% See the License for the specific language governing permissions and
-%% limitations under the License.
-%%
-%% %CopyrightEnd%
-%%
-%%
--module(ftp_format_SUITE).
--author('[email protected]').
-
--include_lib("common_test/include/ct.hrl").
--include("ftp_internal.hrl").
-
-%% Note: This directive should only be used in test suites.
--compile(export_all).
-
-suite() ->
- [{ct_hooks,[ts_install_cth]},
- {timetrap,{seconds,5}}
- ].
-
-all() ->
- [{group, ftp_response}, format_error].
-
-groups() ->
- [{ftp_response, [],
- [ftp_150, ftp_200, ftp_220, ftp_226, ftp_257, ftp_331,
- ftp_425, ftp_other_status_codes, ftp_multiple_lines_status_in_msg,
- ftp_multiple_lines, ftp_multipel_ctrl_messages]}].
-
-init_per_suite(Config) ->
- Config.
-
-end_per_suite(_Config) ->
- ok.
-
-init_per_group(_GroupName, Config) ->
- Config.
-
-end_per_group(_GroupName, Config) ->
- Config.
-
-
-init_per_testcase(_, Config) ->
- Config.
-end_per_testcase(_, _) ->
- ok.
-
-%%-------------------------------------------------------------------------
-%% Test cases starts here.
-%%-------------------------------------------------------------------------
-
-ftp_150() ->
- [{doc, "Especially check that respons can be devided in a random place."}].
-ftp_150(Config) when is_list(Config) ->
- FtpResponse = ["150 ASCII data conn", "ection for /bin/ls ",
- "(134.138.177", ".89,50434) (0 bytes).\r\n"],
-
- "150 ASCII data connection for /bin/ls "
- "(134.138.177.89,50434) (0 bytes).\r\n" = Msg =
- parse(ftp_response, parse_lines, [[], start], FtpResponse),
- {pos_prel, _} = ftp_response:interpret(Msg).
-
-ftp_200() ->
- [{doc, "Especially check that respons can be devided after the first status "
- "code character and in the end delimiter."}].
-ftp_200(Config) when is_list(Config) ->
- FtpResponse = ["2", "00 PORT command successful.", [?CR], [?LF]],
-
- "200 PORT command successful.\r\n" = Msg =
- parse(ftp_response, parse_lines, [[], start], FtpResponse),
- {pos_compl, _} = ftp_response:interpret(Msg),
- ok.
-
-ftp_220() ->
- [{doc, "Especially check that respons can be devided after the "
- "first with space "}].
-ftp_220(Config) when is_list(Config) ->
- FtpResponse = ["220 ","fingon FTP server (SunOS 5.8) ready.\r\n"],
-
- "220 fingon FTP server (SunOS 5.8) ready.\r\n" = Msg =
- parse(ftp_response, parse_lines, [[], start], FtpResponse),
- {pos_compl, _} = ftp_response:interpret(Msg),
- ok.
-
-ftp_226() ->
- [{doc, "Especially check that respons can be devided after second status code"
- " character and in the end delimiter."}].
-ftp_226(Config) when is_list(Config) ->
- FtpResponse = ["22" "6 Transfer complete.\r", [?LF]],
-
- "226 Transfer complete.\r\n" = Msg =
- parse(ftp_response, parse_lines, [[], start], FtpResponse),
- {pos_compl, _} = ftp_response:interpret(Msg),
- ok.
-
-ftp_257() ->
- [{doc, "Especially check that quoted chars do not cause a problem."}].
-ftp_257(Config) when is_list(Config) ->
- FtpResponse = ["257 \"/\" is current directory.\r\n"],
-
- "257 \"/\" is current directory.\r\n" = Msg =
- parse(ftp_response, parse_lines, [[], start], FtpResponse),
- {pos_compl, _} = ftp_response:interpret(Msg),
- ok.
-
-ftp_331() ->
- [{doc, "Especially check that respons can be devided after the third status "
- " status code character."}].
-ftp_331(Config) when is_list(Config) ->
- %% Brake before white space after code
- FtpResponse =
- ["331"," Guest login ok, send ient as password.\r\n"],
-
- "331 Guest login ok, send ient as password.\r\n" = Msg =
- parse(ftp_response, parse_lines, [[], start], FtpResponse),
- {pos_interm, _} = ftp_response:interpret(Msg),
- ok.
-
-ftp_425() ->
- [{doc, "Especially check a message that was received in only one part."}].
-ftp_425(Config) when is_list(Config) ->
- FtpResponse =
- ["425 Can't build data connection: Connection refused.\r\n"],
-
- "425 Can't build data connection: Connection refused.\r\n"
- = Msg = parse(ftp_response, parse_lines, [[], start], FtpResponse),
- {trans_neg_compl, _} = ftp_response:interpret(Msg),
- ok.
-
-ftp_multiple_lines_status_in_msg() ->
- [{doc, "check that multiple lines gets parsed correct, even if we have "
- " the status code within the msg being sent"}].
-ftp_multiple_lines_status_in_msg(Config) when is_list(Config) ->
- ML = "230-User usr-230 is logged in\r\n" ++
- "230 OK. Current directory is /\r\n",
- {ok, ML, <<>>} = ftp_response:parse_lines(list_to_binary(ML), [], start),
- ok.
-
-ftp_multiple_lines() ->
- [{doc, "Especially check multiple lines devided in significant places"}].
-ftp_multiple_lines(Config) when is_list(Config) ->
- FtpResponse = ["21", "4","-The",
- " following commands are recognized:\r\n"
- " USER EPRT STRU MAIL* ALLO CWD",
- " STAT* XRMD \r\n"
- " PASS LPRT MODE MSND* "
- " REST* XCWD HELP PWD ", [?CRLF],
- " ACCT* EPSV RETR MSOM* RNFR LIST "
- " NOOP XPWD \r\n",
- " REIN* LPSV STOR MSAM* RNTO NLST "
- " MKD CDUP \r\n"
- " QUIT PASV APPE MRSQ* ABOR SITE* "
- " XMKD XCUP \r\n"
- " PORT TYPE MLFL* MRCP* DELE SYST "
- " RMD STOU \r\n"
- "214 (*'s => unimplemented)", [?CR], [?LF]],
-
-
- FtpResponse1 = ["214-", "The",
- " following commands are recognized:\r\n"
- " USER EPRT STRU MAIL* ALLO CWD",
- " STAT* XRMD \r\n"
- " PASS LPRT MODE MSND* "
- " REST* XCWD HELP PWD ", [?CRLF],
- " ACCT* EPSV RETR MSOM* RNFR LIST "
- " NOOP XPWD \r\n",
- " REIN* LPSV STOR MSAM* RNTO NLST "
- " MKD CDUP \r\n"
- " QUIT PASV APPE MRSQ* ABOR SITE* "
- " XMKD XCUP \r\n"
- " PORT TYPE MLFL* MRCP* DELE SYST "
- " RMD STOU \r\n"
- "2", "14 (*'s => unimplemented)", [?CR], [?LF]],
-
- FtpResponse2 = ["214-", "The",
- " following commands are recognized:\r\n"
- " USER EPRT STRU MAIL* ALLO CWD",
- " STAT* XRMD \r\n"
- " PASS LPRT MODE MSND* "
- " REST* XCWD HELP PWD ", [?CRLF],
- " ACCT* EPSV RETR MSOM* RNFR LIST "
- " NOOP XPWD \r\n",
- " REIN* LPSV STOR MSAM* RNTO NLST "
- " MKD CDUP \r\n"
- " QUIT PASV APPE MRSQ* ABOR SITE* "
- " XMKD XCUP \r\n"
- " PORT TYPE MLFL* MRCP* DELE SYST "
- " RMD STOU \r\n"
- "21", "4"," (*'s => unimplemented)", [?CR], [?LF]],
-
- MultiLineResultStr =
- "214-The following commands are recognized:\r\n"
- " USER EPRT STRU MAIL* ALLO CWD STAT* "
- "XRMD \r\n"
- " PASS LPRT MODE MSND* REST* XCWD HELP "
- "PWD \r\n"
- " ACCT* EPSV RETR MSOM* RNFR LIST NOOP "
- "XPWD \r\n"
- " REIN* LPSV STOR MSAM* RNTO NLST MKD "
- "CDUP \r\n"
- " QUIT PASV APPE MRSQ* ABOR SITE* XMKD "
- "XCUP \r\n"
- " PORT TYPE MLFL* MRCP* DELE SYST RMD "
- "STOU \r\n"
- "214 (*'s => unimplemented)\r\n",
-
- MultiLineResultStr =
- parse(ftp_response, parse_lines, [[], start], FtpResponse),
- {pos_compl, _} = ftp_response:interpret(MultiLineResultStr),
-
- MultiLineResultStr = parse(ftp_response, parse_lines, [[], start],
- FtpResponse1),
-
- MultiLineResultStr = parse(ftp_response, parse_lines, [[], start],
- FtpResponse2),
- ok.
-
-ftp_other_status_codes() ->
- [{doc, "Check that other valid status codes, than the ones above, are handled"
- "by ftp_response:interpret/1. Note there are som ftp status codes"
- "that will not be received with the current ftp instruction support,"
- "they are not included here."}].
-ftp_other_status_codes(Config) when is_list(Config) ->
-
- %% 1XX
- {pos_prel, _ } = ftp_response:interpret("120 Foobar\r\n"),
-
- %% 2XX
- {pos_compl, _ } = ftp_response:interpret("202 Foobar\r\n"),
- {pos_compl, _ } = ftp_response:interpret("221 Foobar\r\n"),
- {pos_compl, _ } = ftp_response:interpret("227 Foobar\r\n"),
- {pos_compl, _ } = ftp_response:interpret("230 Foobar\r\n"),
- {pos_compl, _ } = ftp_response:interpret("250 Foobar\r\n"),
-
- %% 3XX
- {pos_interm_acct, _ } = ftp_response:interpret("332 Foobar\r\n"),
- {pos_interm, _ } = ftp_response:interpret("350 Foobar\r\n"),
-
- %% 4XX
- {trans_neg_compl, _ } = ftp_response:interpret("421 Foobar\r\n"),
- {trans_neg_compl, _ } = ftp_response:interpret("426 Foobar\r\n"),
- {enofile, _ } = ftp_response:interpret("450 Foobar\r\n"),
- {trans_neg_compl, _ } = ftp_response:interpret("451 Foobar\r\n"),
- {etnospc, _ } = ftp_response:interpret("452 Foobar\r\n"),
-
- %% 5XX
- {perm_neg_compl, _ } = ftp_response:interpret("500 Foobar\r\n"),
- {perm_neg_compl, _ } = ftp_response:interpret("501 Foobar\r\n"),
- {perm_neg_compl, _ } = ftp_response:interpret("503 Foobar\r\n"),
- {perm_neg_compl, _ } = ftp_response:interpret("504 Foobar\r\n"),
- {elogin, _ } = ftp_response:interpret("530 Foobar\r\n"),
- {perm_neg_compl, _ } = ftp_response:interpret("532 Foobar\r\n"),
- {epath, _ } = ftp_response:interpret("550 Foobar\r\n"),
- {epnospc, _ } = ftp_response:interpret("552 Foobar\r\n"),
- {efnamena, _ } = ftp_response:interpret("553 Foobar\r\n"),
- ok.
-
-ftp_multipel_ctrl_messages() ->
- [{doc, "The ftp server may send more than one control message as a reply,"
- "check that they are handled one at the time."}].
-ftp_multipel_ctrl_messages(Config) when is_list(Config) ->
- FtpResponse = ["200 PORT command successful.\r\n200 Foobar\r\n"],
-
- {"200 PORT command successful.\r\n" = Msg, NextMsg} =
- parse(ftp_response, parse_lines, [[], start], FtpResponse),
- {pos_compl, _} = ftp_response:interpret(Msg),
- NewMsg = parse(ftp_response, parse_lines, [[], start], NextMsg),
- {pos_compl, _} = ftp_response:interpret(NewMsg),
- ok.
-
-
-%%-------------------------------------------------------------------------
-format_error(Config) when is_list(Config) ->
- "Synchronisation error during chunk sending." =
- ftp:formaterror(echunk),
- "Session has been closed." = ftp:formaterror(eclosed),
- "Connection to remote server prematurely closed." =
- ftp:formaterror(econn),
- "File or directory already exists." = ftp:formaterror(eexists),
- "Host not found, FTP server not found, or connection rejected." =
- ftp:formaterror(ehost),
- "User not logged in." = ftp:formaterror(elogin),
- "Term is not a binary." = ftp:formaterror(enotbinary),
- "No such file or directory, already exists, or permission denied."
- = ftp:formaterror(epath),
- "No such type." = ftp:formaterror(etype),
- "User name or password not valid." = ftp:formaterror(euser),
- "Insufficient storage space in system." = ftp:formaterror(etnospc),
- "Exceeded storage allocation (for current directory or dataset)."
- = ftp:formaterror(epnospc),
- "File name not allowed." = ftp:formaterror(efnamena),
- "Unknown error: foobar" = ftp:formaterror({error, foobar}).
-
-%%--------------------------------------------------------------------
-%%% Internal functions
-%%--------------------------------------------------------------------
-parse(Module, Function, Args, Bin) when is_binary(Bin) ->
- parse(Module, Function, Args, [binary_to_list(Bin)]);
-
-parse(Module, Function, [AccLines, StatusCode], [Data | Rest]) ->
- case Module:Function(list_to_binary(Data), AccLines, StatusCode) of
- {ok, Result, <<>>} ->
- Result;
- {ok, Result, Next} ->
- {Result, Next};
- {continue, {NewData, NewAccLines, NewStatusCode}} ->
- case Rest of
- [] ->
- ct:fail({wrong_input, Data, Rest});
- [_ | _] ->
- parse(Module, Function, [NewAccLines, NewStatusCode],
- [binary_to_list(NewData) ++ hd(Rest) | tl(Rest)])
- end
- end.
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-26 03:53:45 +0000