diff options
Diffstat (limited to 'lib/inets/test/old_httpd_SUITE_data/server_root/conf/httpd.conf')
| -rw-r--r-- | lib/inets/test/old_httpd_SUITE_data/server_root/conf/httpd.conf | 269 |
1 files changed, 0 insertions, 269 deletions
diff --git a/lib/inets/test/old_httpd_SUITE_data/server_root/conf/httpd.conf b/lib/inets/test/old_httpd_SUITE_data/server_root/conf/httpd.conf deleted file mode 100644 index 3f9fde03b5..0000000000 --- a/lib/inets/test/old_httpd_SUITE_data/server_root/conf/httpd.conf +++ /dev/null @@ -1,269 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1997-2016. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# -# - -# Port: The port the standalone listens to. For ports < 1023, you will -# need httpd to be run as root initially. - -Port 8888 - -# BindAddress: This directive is used to tell the server which IP address -# to listen to. It can either contain "*", an IP address, or a fully -# qualified Internet domain name. -# -# It is also possible to specify the ip-family with the directive. -# There ar three possible value: inet, inet6 and inet6fb4 -# inet: Use IpFamily inet when retreiving the address and -# fail if that does not work. -# inet6: Use IpFamily inet6 when retreiving the address and -# fail if that does not work. -# inet6fb4: First IpFamily inet6 is tried and if that does not work, -# inet is used as fallback. -# Default value for ip-family is inet6fb4 -# -# The syntax is: <address>[|<ip-family>] -# -#BindAddress * -#BindAddress *|inet - - -# ServerName allows you to set a host name which is sent back to clients for -# your server if it's different than the one the program would get (i.e. use -# "www" instead of the host's real name). -# -# Note: You cannot just invent host names and hope they work. The name you -# define here must be a valid DNS name for your host. If you don't understand -# this, ask your network administrator. - -#ServerName your.server.net - -# SocketType is either ip_comm, sockets or ssl. - -SocketType ip_comm - -# Modules: Server run-time plug-in modules written using the Erlang -# Web Server API (EWSAPI). The server API make it easy to add functionality -# to the server. Read more about EWSAPI in the Reference Manual. -# WARNING! Do not tamper with this directive unless you are familiar with -# EWSAPI. - -Modules mod_alias mod_auth mod_esi mod_actions mod_cgi mod_responsecontrol mod_trace mod_range mod_head mod_dir mod_get mod_log mod_disk_log - -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. - -ServerAdmin [email protected] - -# ServerRoot: The directory the server's config, error, and log files -# are kept in - -ServerRoot /var/tmp/server_root - -# ErrorLog: The location of the error log file. If this does not start -# with /, ServerRoot is prepended to it. - -ErrorLog logs/error_log - -# TransferLog: The location of the transfer log file. If this does not -# start with /, ServerRoot is prepended to it. - -TransferLog logs/access_log - -# SecurityLog: The location of the security log file (mod_security required) -# -SecurityLog logs/security_log - -# ErrorDiskLog: The location of the error log file. If this does not -# start with /, ServerRoot is prepended to it. This log file is managed -# with the disk_log module [See disk_log(3)]. The ErrorDiskLogSize directive -# takes two argument, i.e. MaxBytes and MaxFiles. The wrap log writes at most -# MaxBytes bytes on each file, and it uses MaxFiles files before it wraps, and -# truncates the first file. - -ErrorDiskLog logs/error_disk_log -ErrorDiskLogSize 200000 10 - -# TransferDiskLog: The location of the transfer log file. If this does not -# start with /, ServerRoot is prepended to it. This log file is managed -# with the disk_log module [See disk_log(3)]. The TransferDiskLogSize directive -# takes two argument, i.e. MaxBytes and MaxFiles. The wrap log writes at most -# MaxBytes bytes on each file, and it uses MaxFiles files before it wraps, and -# truncates the first file. - -TransferDiskLog logs/access_disk_log -TransferDiskLogSize 200000 10 - -# SecurityDiskLog: The location of the security log file. If this does not -# start with /, ServerRoot is prepended to it. This log file is managed -# with the disk_log module [See disk_log(3)]. The SecurityDiskLogSize directive -# takes two argument, i.e. MaxBytes and MaxFiles. The wrap log writes at most -# MaxBytes bytes on each file, and it uses MaxFiles files before it wraps, and -# truncates the first file. - -SecurityDiskLog logs/security_disk_log -SecurityDiskLogSize 200000 10 - -# Limit on total number of servers running, i.e., limit on the number -# of clients who can simultaneously connect --- if this limit is ever -# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW. -# It is intended mainly as a brake to keep a runaway server from taking -# the server with it as it spirals down... - -MaxClients 50 - -# KeepAlive set the flag for persistent connections. For peristent connections -# set KeepAlive to on. To use One request per connection set the flag to off -# Note: The value has changed since previous version of INETS. -KeepAlive on - -# KeepAliveTimeout sets the number of seconds before a persistent connection -# times out and closes. -KeepAliveTimeout 10 - -# MaxKeepAliveRequests sets the number of seconds before a persistent connection -# times out and closes. -MaxKeepAliveRequests 10 - - - -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. - -DocumentRoot /var/tmp/server_root/htdocs - -# DirectoryIndex: Name of the file or files to use as a pre-written HTML -# directory index. Separate multiple entries with spaces. - -DirectoryIndex index.html welcome.html - -# DefaultType is the default MIME type for documents which the server -# cannot find the type of from filename extensions. - -DefaultType text/plain - -# Aliases: Add here as many aliases as you need (with no limit). The format is -# Alias fakename realname - -Alias /icons/ /var/tmp/server_root/icons/ -Alias /pics/ /var/tmp/server_root/icons/ - -# ScriptAlias: This controls which directories contain server scripts. -# Format: ScriptAlias fakename realname - -ScriptAlias /cgi-bin/ /var/tmp/server_root/cgi-bin/ -ScriptAlias /htbin/ /var/tmp/server_root/cgi-bin/ - -# This directive adds an action, which will activate cgi-script when a -# file is requested using the method of method, which can be one of -# GET, POST and HEAD. It sends the URL and file path of the requested -# document using the standard CGI PATH_INFO and PATH_TRANSLATED -# environment variables. - -#Script HEAD /cgi-bin/printenv.sh - -# This directive adds an action, which will activate cgi-script when a -# file of content type mime-type is requested. It sends the URL and -# file path of the requested document using the standard CGI PATH_INFO -# and PATH_TRANSLATED environment variables. - -#Action image/gif /cgi-bin/printenv.sh - -# ErlScriptAlias: This specifies how "Erl" server scripts are called. -# Format: ErlScriptAlias fakename realname allowed_modules - -ErlScriptAlias /down/erl httpd_example io - -# EvalScriptAlias: This specifies how "Eval" server scripts are called. -# Format: EvalScriptAlias fakename realname allowed_modules - -EvalScriptAlias /eval httpd_example io - -# Point SSLCertificateFile at a PEM encoded certificate. - -SSLCertificateFile /var/tmp/server_root/ssl/ssl_server.pem - -# If the key is not combined with the certificate, use this directive to -# point at the key file. - -SSLCertificateKeyFile /var/tmp/server_root/ssl/ssl_server.pem - -# Set SSLVerifyClient to: -# 0 if no certicate is required -# 1 if the client may present a valid certificate -# 2 if the client must present a valid certificate -# 3 if the client may present a valid certificate but it is not required to -# have a valid CA - -SSLVerifyClient 0 - -# Each directory to which INETS has access, can be configured with respect -# to which services and features are allowed and/or disabled in that -# directory (and its subdirectories). - -<Directory /var/tmp/server_root/htdocs/open> -AuthDBType plain -AuthName Open Area -AuthUserFile /var/tmp/server_root/auth/passwd -AuthGroupFile /var/tmp/server_root/auth/group -require user one Aladdin -</Directory> - -<Directory /var/tmp/server_root/htdocs/secret> -AuthDBType plain -AuthName Secret Area -AuthUserFile /var/tmp/server_root/auth/passwd -AuthGroupFile /var/tmp/server_root/auth/group -require group group1 group2 -</Directory> - -<Directory /var/tmp/server_root/htdocs/secret/top_secret> -AuthDBType plain -AuthName Top Secret Area -AuthUserFile /var/tmp/server_root/auth/passwd -AuthGroupFile /var/tmp/server_root/auth/group -require group group3 -</Directory> - -<Directory /var/tmp/server_root/htdocs/mnesia_open> -AuthDBType mnesia -AuthName Open Area -require user one Aladdin -</Directory> - -<Directory /var/tmp/server_root/htdocs/mnesia_secret> -AuthDBType mnesia -AuthName Secret Area -require group group1 group2 -</Directory> - -<Directory /var/tmp/server_root/htdocs/mnesia_secret/top_secret> -AuthDBType mnesia -AuthName Top Secret Area -require group group3 -allow from 130.100.34 130.100.35 -deny from 100.234.22.12 194.100.34.1 130.100.34.25 -SecurityDataFile logs/security_data -SecurityMaxRetries 3 -SecurityBlockTime 10 -SecurityFailExpireTime 1 -SecurityAuthTimeout 1 -SecurityCallbackModule security_callback -</Directory> |