3 files changed, 4988 insertions, 5039 deletions
diff --git a/lib/inviso/src/inviso_tool.erl b/lib/inviso/src/inviso_tool.erl
index 05158f58fe..7d3cfb9da0 100644
--- a/lib/inviso/src/inviso_tool.erl
+++ b/lib/inviso/src/inviso_tool.erl
@@ -1,3324 +1,3255 @@
-% ``The contents of this file are subject to the Erlang Public License,
-%% Version 1.1, (the "License"); you may not use this file except in
-%% compliance with the License. You should have received a copy of the
-%% Erlang Public License along with this software. If not, it can be
-%% retrieved via the world wide web at http://www.erlang.org/.
-%% 
-%% Software distributed under the License is distributed on an "AS IS"
-%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
-%% the License for the specific language governing rights and limitations
-%% under the License.
-%% 
-%% The Initial Developer of the Original Code is Ericsson Utvecklings AB.
-%% Portions created by Ericsson are Copyright 1999, Ericsson Utvecklings
-%% AB. All Rights Reserved.''
-%% 
-%%     $Id$
-%%
-%% Description:
-%% The inviso_tool implementation. A tool that uses inviso.
-%%
-%% Authors:
-%% Lennart �hman, [email protected]
-%% -----------------------------------------------------------------------------
-
--module(inviso_tool).
-
-
-%% This is the inviso tool, which is a tool using the inviso trace application.
-%% It is developed to make tracing using trace cases possible in an environment
-%% of distributed Erlang nodes.
-%% A current restriction is that the Erlang nodes are supposed to have the same
-%% code. This since inviso tool can at this point not handle subsets of nodes.
-%% Instead all participating Erlang nodes are treated the same.
-%%
-%% The main functionality of the inviso tool are:
-%%
-%% (1) Handles start and stop of tracing at participating nodes.
-%% (2) Interprets trace-case files at a distributed network level.
-%%     (The inviso runtime component is responsible for interpreting
-%%      trace cases at a local level, if run in an autostart).
-%% (3) Keeps a command history log from which:
-%%     (a) Sequences easily can be repeated.
-%%     (b) Autostart configuration files can be created (understood by the
-%%         default inviso autostart mechanism).
-%% (4) Performs reactivation in case tracing is suspended (manually or by
-%%     an overload mechanism).
-%% (5) Can reconnect crashed nodes and by using the history bringing them
-%%     up to speed.
-
-%% Distributed Erlang
-%% ------------------
-%% Inviso is built to run in a distributed environment.
-%% The inviso tool can also be used in a non distributed environment.
-
-%% Short description
-%% -----------------
-%% Start-up of the inviso tool
-%% During the start-up of the tool, the tool starts runtime components at
-%% all participating nodes. A runtime component can already be running at
-%% a particular node and will then simply be adopted.
-%%
-%% Session
-%% A session is said to start when tracing is initiated, and ends when
-%% made to stop by the user. When a session is stopped, tracing is stopped
-%% at all participating nodes. Note that participating nodes may come and
-%% go though the time-frame of a session. That means that if a node is
-%% reconnected it may resume its tracing in the current session through
-%% a 'restart_session'. A runtime component that is already tracing at the
-%% time start-session will simply be part of the session without its
-%% ingoing tracing being changed.
-%%
-%% Reactivation
-%% A node that is suspended can be reactivated to resume tracing. Note that
-%% tracing has in this situation never been stopped at the node in question.
-%% The inviso tool resumes the node and applies the history to it.
-%%
-%% Reconnect
-%% A node that is "down" from the inviso tool's perspective can be
-%% reconnected. During reconnection the tool restarts the runtime component
-%% at that node but does not (re)initiate tracing. The latter is called
-%% restart_session and must be done explicitly, unless the node in question
-%% is in fact already tracing. If the node is already tracing (due to an autostart
-%% for instance), it automatically becomes part of the ongoing session (if
-%% there is an ongoing session).
-%%
-%% Restart Session
-%% A node that has been down and has been reconnected can be made to
-%% initialize and resume its tracing. This is done by starting the session
-%% at the node in question and redoing the current history.
-
-%% Trace files within a session
-%% Since it is possible to init-tracing (from an inviso perspective) several
-%% times within the same session, a session may leave several trace log files
-%% behind. This must be resolved by the tracer data generator function
-%% (user supplied) by marking filenames in a chronological order but still
-%% making them possible to identify as part of the same session
-
-
-
-%% -----------------------------------------------------------------------------
-%% API exports.
-%% -----------------------------------------------------------------------------
-
--export([start/0,start/1,stop/0,stop/1]).
--export([reconnect_nodes/0,reconnect_nodes/1,
-	 start_session/0,start_session/1,
-	 reinitiate_session/0,reinitiate_session/1,
-	 restore_session/0,restore_session/1,restore_session/2,
-	 stop_session/0,
-	 reset_nodes/0,reset_nodes/1,
-	 atc/3,sync_atc/3,sync_atc/4,
-	 sync_rtc/2,sync_rtc/3,
-	 dtc/2,sync_dtc/2,sync_dtc/3,
-	 inviso/2]).
--export([reactivate/0,reactivate/1,
-	 save_history/1,
-	 get_autostart_data/1,get_autostart_data/2,
-	 get_activities/0,get_node_status/0,get_node_status/1,get_session_data/0]).
--export([flush/0,flush/1]).
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% Debug exports.
-%% -----------------------------------------------------------------------------
-
--export([get_loopdata/0]).
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% OTP exports and call backs.
-%% -----------------------------------------------------------------------------
-
--export([init/1,handle_call/3,handle_cast/2,handle_info/2,terminate/2]).
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% Internal exports.
-%% -----------------------------------------------------------------------------
-
--export([tc_executer/4,reactivator_executer/6]).
--export([std_options_generator/1]).
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% Constants.
-%% -----------------------------------------------------------------------------
-
-%% Defines the inviso function calls that shall be possible to do through the
-%% inviso API in this tool.
--define(INVISO_CMDS,
-	[{tp,5},{tp,4},{tp,1},{tpl,5},{tpl,4},{tpl,1},
-	 {ctp,1},{ctp,2},{ctp,3},{ctpl,1},{ctpl,2},{ctpl,3},
-	 {tf,2},{tf,1},{ctf,2},{ctf,1},{ctf_all,0},
-	 {init_tpm,4},{init_tpm,7},
-	 {tpm,4},{tpm,5},{tpm,8},
-	 {tpm_tracer,4},{tpm_tracer,5},{init_tpm,8},
-	 {tpm_ms,5},{tpm_ms_tracer,5},
-	 {ctpm_ms,4},{ctpm,3},
-	 {tpm_localnames,0},{ctpm_localnames,0},
-	 {tpm_globalnames,0},{ctpm_globalnames,0},
-	 {ctp_all,0},
-	 {suspend,1},{cancel_suspension,0}]).
-%% -----------------------------------------------------------------------------
-
-%% These inviso functions shall be included in the command history log. Others
-%% are not relevant to be redone during a recactivation, a restart session or
-%% exported to an autostart file.
--define(INVISO_CMD_HISTORY,
-	[{tp,5},{tp,4},{tp,1},{tpl,5},{tpl,4},{tpl,1},
-	 {ctp,1},{ctp,2},{ctp,3},{ctpl,1},{ctpl,2},{ctpl,3},
-	 {tf,2},{tf,1},{ctf,2},{ctf,1},{ctf_all,0},
-	 {init_tpm,4},{init_tpm,7},
-	 {tpm,4},{tpm,5},{tpm,8},
-	 {tpm_tracer,4},{tpm_tracer,5},{init_tpm,8},
-	 {tpm_ms,5},{tpm_ms_tracer,5},
-	 {ctpm_ms,4},{ctpm,3},
-	 {tpm_localnames,0},{ctpm_localnames,0},
-	 {tpm_globalnames,0},{ctpm_globalnames,0},
-	 {ctp_all,0}]).
-%% -----------------------------------------------------------------------------
-
-%% Since many function calls to inviso may take long time, especially if they
-%% involve difficult and many trace patterns to set, the default gen_server:call
-%% time out can not be used. We just do not want to get stuck for ever if some
-%% error occurs.
--define(CALL_TIMEOUT,60000).
-
-%% Default max time to wait for a trace case called synchronously to return.
--define(SYNC_TC_TIMEOUT,10000).
-
-%% Runtime components shall terminate when the tool terminates.
--define(DEFAULT_DEPENDENCY,{dependency,0}).
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% Record definitions.
-%% -----------------------------------------------------------------------------
-
-%% The loopdata record.
--record(ld,{
-	  dir=".",                          % Working dir of the tool.
-	  nodes=down,                       % The nodesD database, defaults to non-distr.
-	  c_node,                           % Location of inviso_c.
-	  c_pid,                            % The inviso control component.
-	  regexp_node,                      % Node for regexp expansions.
-	  tc_dict,                          % Trace case definition db.
-	  chl,                              % Command history log.
-	  session_state=passive,            % passive | tracing
-	  tdg={inviso_tool_lib,std_tdg,[]}, % Tracer data generator func.
-	  tracer_data,                      % Current session nr and TDGargs.
-	  reactivators=[],                  % Pids of now running reactivators.
-	  tc_def_file,                      % Trace case definition file.
-	  optg={?MODULE,std_options_generator,[]}, % Generates options to add_nodes/3.
-	  initial_tcs=[],                   % Initial trace cases.
-	  started_initial_tcs=[],           % Cases that must be stopped when stop_tracing.
-	  history_dir,                      % File path for history file.
-	  keep_nodes=[],                    % Nodes that shall not be cleared when stopping.
-	  debug=false                       % Internal debug mode
-	  }).
-%% -----------------------------------------------------------------------------
-
-
-%% =============================================================================
-%% API
-%% =============================================================================
-
-%% start()={ok,Pid} | {error,{already_started,pid()}}
-%% start(Config)
-%%   Config=[{Opt,Value},...], list of tuple options.
-%%     Opt=dir|nodes|c_node|regexp_node|tdg|tc_def_file|optg|initial_tcs|
-%%           history_dir|keep_nodes
-%% Starts the inviso_tool process. Options in Config are the same as those
-%% which are kept in the #ld structure.
-start() ->
-    start([]).
-start(Config) ->
-    gen_server:start({local,?MODULE},?MODULE,Config,[]).
-%% -----------------------------------------------------------------------------
-
-%% stop(UntouchedNodes)=
-%% stop()={ok,NodeResults} | NodeResult | {error,Reason}
-%%   UntouchedNodes=list(), nodes where any trace patterns shall not be removed.
-%%   NodeResults=[{Node,NodeResult},...]
-%%   NodeResult=ok | {error,Reason} | patterns_untouched
-%% Stops the inviso tool and the inviso control component. Runtime components are
-%% stopped by them selves depending on their dependcy of the control component.
-%% All runtime components that are not marked as to be kept will have their
-%% trace patterns cleared before the inviso control component is shutdown.
-%% The NodeResults indicates which nodes were successfullt handled.
-stop() ->
-    stop([]).
-stop(UntouchedNodes) ->
-    gen_server:call(?MODULE,{stop,UntouchedNodes},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% reconnect_nodes()=NodeResult; function for the nod-distributed case.
-%% reconnect_nodes(Nodes)={ok,NodesResults}
-%%   NodesResults=[{Node,NodeResult},...]
-%%     NodeResult={ok,{State,Status}} | {error,NReason}
-%%       State=tracing | inactive
-%%       Status=running | suspended
-%%       NReason=unknown_node | already_connected | down
-%% (Re)starts the inviso runtime components at Nodes. Depending on its state
-%% (new,idle or tracing) and if the tool is running a session or not, it becomes
-%% part of the tool's ongoing session. If the newly reconnected node is not
-%% tracing but the tool runs a session, the node must be reinitiated to become
-%% tracing.
-reconnect_nodes() ->
-    gen_server:call(?MODULE,{reconnect_nodes,local_runtime},?CALL_TIMEOUT).
+%% %CopyrightBegin%
+%% 
+%% Copyright Ericsson AB 2005-2011. All Rights Reserved.
+%% 
+%% The contents of this file are subject to the Erlang Public License,
+%% Version 1.1, (the "License"); you may not use this file except in
+%% compliance with the License. You should have received a copy of the
+%% Erlang Public License along with this software. If not, it can be
+%% retrieved online at http://www.erlang.org/.
+%% 
+%% Software distributed under the License is distributed on an "AS IS"
+%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+%% the License for the specific language governing rights and limitations
+%% under the License.
+%% 
+%% %CopyrightEnd%
+%%
+%% Description:
+%% The inviso_tool implementation. A tool that uses inviso.
+%%
+%% Authors:
+%% Lennart Öhman, [email protected]
+%% -----------------------------------------------------------------------------
+
+-module(inviso_tool).
+
+
+%% This is the inviso tool, which is a tool using the inviso trace application.
+%% It is developed to make tracing using trace cases possible in an environment
+%% of distributed Erlang nodes.
+%% A current restriction is that the Erlang nodes are supposed to have the same
+%% code. This since inviso tool can at this point not handle subsets of nodes.
+%% Instead all participating Erlang nodes are treated the same.
+%%
+%% The main functionality of the inviso tool are:
+%%
+%% (1) Handles start and stop of tracing at participating nodes.
+%% (2) Interprets trace-case files at a distributed network level.
+%%     (The inviso runtime component is responsible for interpreting
+%%      trace cases at a local level, if run in an autostart).
+%% (3) Keeps a command history log from which:
+%%     (a) Sequences easily can be repeated.
+%%     (b) Autostart configuration files can be created (understood by the
+%%         default inviso autostart mechanism).
+%% (4) Performs reactivation in case tracing is suspended (manually or by
+%%     an overload mechanism).
+%% (5) Can reconnect crashed nodes and by using the history bringing them
+%%     up to speed.
+
+%% Distributed Erlang
+%% ------------------
+%% Inviso is built to run in a distributed environment.
+%% The inviso tool can also be used in a non distributed environment.
+
+%% Short description
+%% -----------------
+%% Start-up of the inviso tool
+%% During the start-up of the tool, the tool starts runtime components at
+%% all participating nodes. A runtime component can already be running at
+%% a particular node and will then simply be adopted.
+%%
+%% Session
+%% A session is said to start when tracing is initiated, and ends when
+%% made to stop by the user. When a session is stopped, tracing is stopped
+%% at all participating nodes. Note that participating nodes may come and
+%% go though the time-frame of a session. That means that if a node is
+%% reconnected it may resume its tracing in the current session through
+%% a 'restart_session'. A runtime component that is already tracing at the
+%% time start-session will simply be part of the session without its
+%% ingoing tracing being changed.
+%%
+%% Reactivation
+%% A node that is suspended can be reactivated to resume tracing. Note that
+%% tracing has in this situation never been stopped at the node in question.
+%% The inviso tool resumes the node and applies the history to it.
+%%
+%% Reconnect
+%% A node that is "down" from the inviso tool's perspective can be
+%% reconnected. During reconnection the tool restarts the runtime component
+%% at that node but does not (re)initiate tracing. The latter is called
+%% restart_session and must be done explicitly, unless the node in question
+%% is in fact already tracing. If the node is already tracing (due to an autostart
+%% for instance), it automatically becomes part of the ongoing session (if
+%% there is an ongoing session).
+%%
+%% Restart Session
+%% A node that has been down and has been reconnected can be made to
+%% initialize and resume its tracing. This is done by starting the session
+%% at the node in question and redoing the current history.
+
+%% Trace files within a session
+%% Since it is possible to init-tracing (from an inviso perspective) several
+%% times within the same session, a session may leave several trace log files
+%% behind. This must be resolved by the tracer data generator function
+%% (user supplied) by marking filenames in a chronological order but still
+%% making them possible to identify as part of the same session
+
+
+
+%% -----------------------------------------------------------------------------
+%% API exports.
+%% -----------------------------------------------------------------------------
+
+-export([start/0,start/1,stop/0,stop/1]).
+-export([reconnect_nodes/0,reconnect_nodes/1,
+	 start_session/0,start_session/1,
+	 reinitiate_session/0,reinitiate_session/1,
+	 restore_session/0,restore_session/1,restore_session/2,
+	 stop_session/0,
+	 reset_nodes/0,reset_nodes/1,
+	 atc/3,sync_atc/3,sync_atc/4,
+	 sync_rtc/2,sync_rtc/3,
+	 dtc/2,sync_dtc/2,sync_dtc/3,
+	 inviso/2]).
+-export([reactivate/0,reactivate/1,
+	 save_history/1,
+	 get_autostart_data/1,get_autostart_data/2,
+	 get_activities/0,get_node_status/0,get_node_status/1,get_session_data/0]).
+-export([flush/0,flush/1]).
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% Debug exports.
+%% -----------------------------------------------------------------------------
+
+-export([get_loopdata/0]).
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% OTP exports and call backs.
+%% -----------------------------------------------------------------------------
+
+-export([init/1,handle_call/3,handle_cast/2,handle_info/2,terminate/2]).
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% Internal exports.
+%% -----------------------------------------------------------------------------
+
+-export([tc_executer/4,reactivator_executer/6]).
+-export([std_options_generator/1]).
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% Constants.
+%% -----------------------------------------------------------------------------
+
+%% Defines the inviso function calls that shall be possible to do through the
+%% inviso API in this tool.
+-define(INVISO_CMDS,
+	[{tp,5},{tp,4},{tp,1},{tpl,5},{tpl,4},{tpl,1},
+	 {ctp,1},{ctp,2},{ctp,3},{ctpl,1},{ctpl,2},{ctpl,3},
+	 {tf,2},{tf,1},{ctf,2},{ctf,1},{ctf_all,0},
+	 {init_tpm,4},{init_tpm,7},
+	 {tpm,4},{tpm,5},{tpm,8},
+	 {tpm_tracer,4},{tpm_tracer,5},{init_tpm,8},
+	 {tpm_ms,5},{tpm_ms_tracer,5},
+	 {ctpm_ms,4},{ctpm,3},
+	 {tpm_localnames,0},{ctpm_localnames,0},
+	 {tpm_globalnames,0},{ctpm_globalnames,0},
+	 {ctp_all,0},
+	 {suspend,1},{cancel_suspension,0}]).
+%% -----------------------------------------------------------------------------
+
+%% These inviso functions shall be included in the command history log. Others
+%% are not relevant to be redone during a recactivation, a restart session or
+%% exported to an autostart file.
+-define(INVISO_CMD_HISTORY,
+	[{tp,5},{tp,4},{tp,1},{tpl,5},{tpl,4},{tpl,1},
+	 {ctp,1},{ctp,2},{ctp,3},{ctpl,1},{ctpl,2},{ctpl,3},
+	 {tf,2},{tf,1},{ctf,2},{ctf,1},{ctf_all,0},
+	 {init_tpm,4},{init_tpm,7},
+	 {tpm,4},{tpm,5},{tpm,8},
+	 {tpm_tracer,4},{tpm_tracer,5},{init_tpm,8},
+	 {tpm_ms,5},{tpm_ms_tracer,5},
+	 {ctpm_ms,4},{ctpm,3},
+	 {tpm_localnames,0},{ctpm_localnames,0},
+	 {tpm_globalnames,0},{ctpm_globalnames,0},
+	 {ctp_all,0}]).
+%% -----------------------------------------------------------------------------
+
+%% Since many function calls to inviso may take long time, especially if they
+%% involve difficult and many trace patterns to set, the default gen_server:call
+%% time out can not be used. We just do not want to get stuck for ever if some
+%% error occurs.
+-define(CALL_TIMEOUT,60000).
+
+%% Default max time to wait for a trace case called synchronously to return.
+-define(SYNC_TC_TIMEOUT,10000).
+
+%% Runtime components shall terminate when the tool terminates.
+-define(DEFAULT_DEPENDENCY,{dependency,0}).
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% Record definitions.
+%% -----------------------------------------------------------------------------
+
+%% The loopdata record.
+-record(ld,{
+	  dir=".",                          % Working dir of the tool.
+	  nodes=down,                       % The nodesD database, defaults to non-distr.
+	  c_node,                           % Location of inviso_c.
+	  c_pid,                            % The inviso control component.
+	  regexp_node,                      % Node for regexp expansions.
+	  tc_dict,                          % Trace case definition db.
+	  chl,                              % Command history log.
+	  session_state=passive,            % passive | tracing
+	  tdg={inviso_tool_lib,std_tdg,[]}, % Tracer data generator func.
+	  tracer_data,                      % Current session nr and TDGargs.
+	  reactivators=[],                  % Pids of now running reactivators.
+	  tc_def_file,                      % Trace case definition file.
+	  optg={?MODULE,std_options_generator,[]}, % Generates options to add_nodes/3.
+	  initial_tcs=[],                   % Initial trace cases.
+	  started_initial_tcs=[],           % Cases that must be stopped when stop_tracing.
+	  history_dir,                      % File path for history file.
+	  keep_nodes=[],                    % Nodes that shall not be cleared when stopping.
+	  debug=false                       % Internal debug mode
+	  }).
+%% -----------------------------------------------------------------------------
+
+
+%% =============================================================================
+%% API
+%% =============================================================================
+
+%% start()={ok,Pid} | {error,{already_started,pid()}}
+%% start(Config)
+%%   Config=[{Opt,Value},...], list of tuple options.
+%%     Opt=dir|nodes|c_node|regexp_node|tdg|tc_def_file|optg|initial_tcs|
+%%           history_dir|keep_nodes
+%% Starts the inviso_tool process. Options in Config are the same as those
+%% which are kept in the #ld structure.
+start() ->
+    start([]).
+start(Config) ->
+    gen_server:start({local,?MODULE},?MODULE,Config,[]).
+%% -----------------------------------------------------------------------------
+
+%% stop(UntouchedNodes)=
+%% stop()={ok,NodeResults} | NodeResult | {error,Reason}
+%%   UntouchedNodes=list(), nodes where any trace patterns shall not be removed.
+%%   NodeResults=[{Node,NodeResult},...]
+%%   NodeResult=ok | {error,Reason} | patterns_untouched
+%% Stops the inviso tool and the inviso control component. Runtime components are
+%% stopped by them selves depending on their dependcy of the control component.
+%% All runtime components that are not marked as to be kept will have their
+%% trace patterns cleared before the inviso control component is shutdown.
+%% The NodeResults indicates which nodes were successfullt handled.
+stop() ->
+    stop([]).
+stop(UntouchedNodes) ->
+    gen_server:call(?MODULE,{stop,UntouchedNodes},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% reconnect_nodes()=NodeResult; function for the nod-distributed case.
+%% reconnect_nodes(Nodes)={ok,NodesResults}
+%%   NodesResults=[{Node,NodeResult},...]
+%%     NodeResult={ok,{State,Status}} | {error,NReason}
+%%       State=tracing | inactive
+%%       Status=running | suspended
+%%       NReason=unknown_node | already_connected | down
+%% (Re)starts the inviso runtime components at Nodes. Depending on its state
+%% (new,idle or tracing) and if the tool is running a session or not, it becomes
+%% part of the tool's ongoing session. If the newly reconnected node is not
+%% tracing but the tool runs a session, the node must be reinitiated to become
+%% tracing.
+reconnect_nodes() ->
+    gen_server:call(?MODULE,{reconnect_nodes,local_runtime},?CALL_TIMEOUT).
 reconnect_nodes(Node) when is_atom(Node) ->
-    reconnect_nodes([Node]);
+    reconnect_nodes([Node]);
 reconnect_nodes(Nodes) when is_list(Nodes) ->
-    gen_server:call(?MODULE,{reconnect_nodes,Nodes},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% start_session()={ok,{SessionNr,InvisoReturn}} | {error,Reason}
-%% start_session(MoreTDGargs)=
-%%   MoreTDGargs=list(), prepended to the fixed list of args used when calling the
-%%     tracer data generator function.
-%%   SessionNr=integer(), trace sessions are numbered by the tool.
-%%   InvisoReturn=If successful inviso call, the returnvalue from inviso.
-%%     Note that individual nodes may be unsuccessful. See inviso:init_tracing/1
-%% Initiates tracing at all participating nodes.
-start_session() ->
-    start_session([]).
-start_session(MoreTDGargs) ->
-    gen_server:call(?MODULE,{start_session,MoreTDGargs},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% reinitiate_session(Nodes)={ok,InvisoReturn} | {error,Reason}
-%%   InvisoReturn=If successful inviso call, the returnvalue from inviso:init_tracing/1.
-%%     Note that individual nodes may be unsuccessful. Mentioned nodes not part
-%%       of the tool or not in state inactive will be marked as failing by the
-%%       tool in the InvisoReturn.
-%% To reinitate a node means to (inviso) init tracing at it according to saved
-%% tracer data generator arguments for the current session and then redo the current
-%% history to bring it up to speed. Note that the tool must be running a session
-%% for reinitiate to work.
-reinitiate_session() ->
-    gen_server:call(?MODULE,{reinitiate_session,local_runtime},?CALL_TIMEOUT).
-reinitiate_session(Nodes) ->
-    gen_server:call(?MODULE,{reinitiate_session,Nodes},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% restore_session()=
-%% restore_session(MoreTDGargs)=
-%% restore_session(FileName)=
-%% restore_session(FileName,MoreTDGargs)={ok,{SessionNr,InvisoReturn}} | {error,Reason}
-%% The two first clauses will start a new session using the last history. This
-%% implies that there must have been a session running prior.
-%% The two last clauses starts a session and reads a history file and executes the
-%% tracecases in it at all inactive nodes.
-%% In both cases the reused or read history becomes the current histoy, just if the
-%% session had been initiated manually. The tool may not
-%% have a session ongoing, and nodes already tracing (nodes which were adopted)
-%% are not effected. Just like when starting a session manually.
-restore_session() ->
-    restore_session([]).
-restore_session([]) ->                      % This cant be a filename.
-    gen_server:call(?MODULE,{restore_session,[]},?CALL_TIMEOUT);
-restore_session(FileNameOrMoreTDGargs) ->
-    case is_string(FileNameOrMoreTDGargs) of
-	true ->                             % Interpret it as a filename.
-	    restore_session(FileNameOrMoreTDGargs,[]);
-	false ->                            % The we want to use last session history!
-	    gen_server:call(?MODULE,{restore_session,FileNameOrMoreTDGargs},?CALL_TIMEOUT)
-    end.
-restore_session(FileName,MoreTDGargs) ->
-    gen_server:call(?MODULE,{restore_session,{FileName,MoreTDGargs}},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% stop_session()={ok,{SessionNr,Result}} | {error,Reason}
-%%   SessionNr=integer()
-%%   Result=[{Node,NodeResult},...] | NonDistributedNodeResult
-%%     NodeResult=ok | {error,Reason}
-%%     NonDistributedNodeResult=[ok] | []
-%% Stops inviso tracing at all participating nodes. The inviso runtime components
-%% will go to state idle. It is now time to fetch the logfiles. Will most often
-%% succeed. Will only return an error if the entire inviso call returned an
-%% error. Not if an individual node failed stop tracing successfully.
-%% Any running trace case, including reactivator processes will be terminated.
-stop_session() ->
-    gen_server:call(?MODULE,stop_session,?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% reset_nodes()=NodeResult | {error,Reason}
-%% reset_nodes(Nodes)={ok,NodeResults} | {error,Reason}
-%%   NodeResults and NodeResult as returned by inviso:clear/1 and /0.
-%% Clear nodes from trace flags, trace patterns and meta trace patterns. The tool
-%% must not be having a running session.
-reset_nodes() ->
-    gen_server:call(?MODULE,{reset_nodes,local_runtime},?CALL_TIMEOUT).
-reset_nodes(Nodes) ->
-    gen_server:call(?MODULE,{reset_nodes,Nodes},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% atc(TC,Id,Vars)=ok | {error,Reason}
-%%   TC=atom(), name of the trace case.
-%%   Id=term(), given name of this usage of TC.
-%%   Vars=list(), list of variable bindings [{Var,Value},...], Var=atom(),Value=term().
-%% Function activating a trace case. The trace case must be defined in the
-%% trace case dictionary. The 'ok' return value is only a signal that the
-%% trace case has started successfully. It may then run for as long as it is
-%% programmed to run. An erroneous return value does not necessarily mean that
-%% the trace case has not been executed. It rather means that is undetermined
-%% what happend.
-atc(TC,Id,Vars) ->
-    gen_server:call(?MODULE,{atc,{TC,Id,Vars}},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% sync_atc(TC,Id,Vars)=Result | {error,Reason}
-%% sync_atc(TC,Id,Vars,TimeOut)=
-%%   Result=term(), what ever is returned be the last expression in the trace case.
-%%   TimeOut=interger() | infinity, the max wait time for the trace case to finnish.
-%% As atc/3 but waits for the trace case to finish.
-sync_atc(TC,Id,Vars) ->
-    gen_server:call(?MODULE,{sync_atc,{TC,Id,Vars,?SYNC_TC_TIMEOUT}},?CALL_TIMEOUT).
-sync_atc(TC,Id,Vars,TimeOut) ->
-    gen_server:call(?MODULE,{sync_atc,{TC,Id,Vars,TimeOut}},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% sync_rtc(TC,Vars)=Result | {error,Reason}
-%% sync_rtc(TC,Vars,TimeOut)=
-%%   Result=term(), what ever is returned be the last expression in the trace case.
-%%   TimeOut=interger() | infinity, the max wait time for the trace case to finnish.
-%% As sync_atc/3 but the trace case is not marked as activated. It is mearly placed
-%% in the history. Hence with sync_rtc a trace case can be "activated" multiple time.
-sync_rtc(TC,Vars) ->
-    gen_server:call(?MODULE,{sync_rtc,{TC,Vars,?SYNC_TC_TIMEOUT}},?CALL_TIMEOUT).
-sync_rtc(TC,Vars,TimeOut) ->
-    gen_server:call(?MODULE,{sync_rtc,{TC,Vars,TimeOut}},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% dtc(TC,Id)=ok | {error,Reason}
-%% Deactivates a previosly activated trace case. This function can only be used
-%% on trace cases that has a deactivation defined in the trace case dictionary.
-%% There is of course really no difference between a file containing an activation
-%% compared to a deactivation. But to be able cancelling activations out from the
-%% history log, a defined deactivation is essential.
-%% As with activation, the returned 'ok' simply indicates the start of the trace
-%% case.
-dtc(TC,Id) ->
-    gen_server:call(?MODULE,{dtc,{TC,Id}},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% sync_dtc(TC,Id)=Result | {error,Reason}
-%% sync_dtc(TC,Id,TimeOut)=
-%%   Synchronous deactivation of trace case. See dtc/2 and sync_atc/3 for
-%%   parameters.
-sync_dtc(TC,Id) ->
-    gen_server:call(?MODULE,{sync_dtc,{TC,Id,?SYNC_TC_TIMEOUT}},?CALL_TIMEOUT).
-sync_dtc(TC,Id,TimeOut) ->
-    gen_server:call(?MODULE,{sync_dtc,{TC,Id,TimeOut}},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% inviso(Cmd,Args)=Result
-%%   Cmd=atom(), the (inviso) function name that shall be called.
-%%   Args=list(), the arguments to Cmd.
-%%   Result=term(), the result from the inviso function call.
-%% This function executes a Cmd in the inviso tool context. The inviso call will
-%% be logged in history log and thereby repeated in case of a reactivation.
-%% Note that this function is intended for use with inviso function API without
-%% specifying any nodes, since the function call is supposed to be carried out on
-%% all nodes.
-%% When these functions are written to an autostart config file by the tool there
-%% is supposed to be a translation to inviso_rt functions.
-inviso(Cmd,Args) ->
-    gen_server:call(?MODULE,{inviso,{Cmd,Args}},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% reactivate()=ok | {error,Reason}
-%% reactivate(Node)=ok | {error,Reason}
-%% Moves a runtime component from suspended to the state running. This can be
-%% done for both tracing and inactive nodes. The later is necessary since you
-%% may have stopped tracing with a node suspended.
-%% In case the node is tracing, commands in the command history log are redone at
-%% the node in questions.
-%% Note that this function returns 'ok' before the node is running. This because the
-%% the reactivated history is done by a separate process and there is no guarantee
-%% when it will be ready. The reactivated node will not be marked as running in
-%% the tool until done reactivating.
-%% Further it is important to understand that if there are "ongoing" tracecases
-%% (i.e tracecase scripts that are currently executing) and this node was running
-%% at the time that tracecase script started to execute, the list of nodes bound
-%% to the Nodes variable in that script executer includes this node. Making it
-%% no longer suspended makes it start executing inviso commands from where ever
-%% such are called. Hence the reactivation may be interferred by that tracecase.
-reactivate() ->                             % Non-distributed API.
-    reactivate(node()).
-reactivate(Node) ->
-    gen_server:call(?MODULE,{reactivate,Node},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% save_history(FileName)={ok,AbsFileName} | {error,Reason}
-%% Saves the currently collected command history log to a file. The file will
-%% be a binary-file. If FileName is an absolute path, it will be saved to that
-%% file. Otherwise the history dir will be used. If no history dir was specified
-%% the tool dir will be used, prepended to FileName.
-save_history(FileName) ->
-    gen_server:call(?MODULE,{save_history,FileName},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% get_autostart_data(Nodes,Dependency)={ok,{AutoStartData,NodeResults} |
-%%     {ok,{AutoStartData,NodeResult}} | {error,Reason}
-%%   Dependency=inviso dependency parameter which will be used for every
-%%     autostarted runtime component (included in Options).
-%%   NodeResults=[{Node,NodeResult},...]
-%%     NodeResult={ok,{Options,{tdg,{M,F,CompleteTDGargs}}}} | {error,Reason}
-%%       Options=add_nodes options to the inviso runtime component.
-%%       M,F=atom(), the module and function for tracerdata generation.
-%%       CompleteTDGargs=list(), all arguments as they are given to the tracer
-%%         data generator function.
-%%       AutostartData=[CaseSpec,...]
-%%         CaseSpec={file,{FileName,Bindings}} | {mfa,{M,F,Args}}
-%%           FileName=string(), pointing out the trace case file. Note that this
-%%             is the same as the path used by the tool.
-%%           Bindings=Var bindings used according to the history for the
-%%             invocation.
-%%           M,F=atom(), the function that shall be called (normally some inviso).
-%%           Args=list(), the actual arguments. Note that this may contain things
-%%             which can not be written to file (ports, pids,...).
-%% Function returning information on how to autostart a node to make it trace
-%% according to the current history. The inviso_tool does not know how to write
-%% the necessary files at the nodes in question. That must be done by the user
-%% of the tool, guided by the return value from this function.
-%% Note that there will be two types of trace case files. Regular trace case
-%% files and binaries returned from this function. The latter contains the
-%% inviso commands which have been executed. Note that the order amongst the
-%% trace cases and binaries is of importance (otherwise they will be redone in
-%% an incorrect order).
-get_autostart_data(Dependency) ->
-    gen_server:call(?MODULE,{get_autostart_data,Dependency},?CALL_TIMEOUT).
-get_autostart_data(Nodes,Dependency) ->
-    gen_server:call(?MODULE,{get_autostart_data,{Nodes,Dependency}},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% get_activities()={ok,Ongoing} | {error,Reason}
-%%   Ongoing=list(); [ [TraceCases] [,Reactivators] ]
-%%     TraceCases={tracecases,TraceCaseList}
-%%       TraceCaseList=[{{TCname,Id},Phase},...]
-%%         Phase=activating | deactivating
-%%     Reactivators={reactivating_nodes,ReactivatingNodes}
-%%       ReactivatingNodes=[Node,...]
-%% Returns a list of assynchronous tracecases and nodes doing reactivation at
-%% this momement. This can be useful to implement "home brewn" synchronization,
-%% waiting for the runtime components to reach a certain state.
-get_activities() ->
-    gen_server:call(?MODULE,get_activities,?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% get_status(Node)={ok,StateStatus} | {error,Reason}
-%%   StateStatus={State,Status} | reactivating | down
-%%     State=tracing | inactive | trace_failure
-%%     Status=running | suspended
-get_node_status() ->
-    get_node_status(local_runtime).
-get_node_status(Node) ->
-    gen_server:call(?MODULE,{get_node_status,Node},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% get_session_data()={ok,{Status,SessionNr,TDGargs}} | {error,Reason}
-%%   Status=tracing | not_tracing, info about current/last session.
-%%   SessionNr=integer()
-%%   TDGargs=list(), list of the arguments that will be given to the tracer data
-%%     generator function (not including the leading Nodes list).
-%% Returns data about the current or last session.
-get_session_data() ->
-    gen_server:call(?MODULE,get_session_data,?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% flush()={ok,NodeResults} | NodeResult | {error,Reason}
-%% flush(Nodes)={ok,NodesResults} | {error,Reason}
-%%   NodeResults=[{Node,NodeResult},...]
-%%   NodeResult=ok | {error,Reason}
-%% Makes runtime components flush their trace ports.
-flush() ->
-    gen_server:call(?MODULE,flush,?CALL_TIMEOUT).
-flush(Nodes) ->
-    gen_server:call(?MODULE,{flush,Nodes},?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% get_loopdata()=#ld
-%% Debug API returning the internal loopdata structure. See #ld above for details.
-get_loopdata() ->
-    gen_server:call(?MODULE,get_loopdata,?CALL_TIMEOUT).
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% Internal APIs.
-%% -----------------------------------------------------------------------------
-
-%% tc_executer_reply(To,Reply)=nothing significant
-%%   To=pid()
-%%   Reply=term()
-%% Internal API used by a trace case executer process to signal its completion.
-tc_executer_reply(To,Reply) ->
-    gen_server:cast(To,{tc_executer_reply,Reply}).
-%% -----------------------------------------------------------------------------
-
-%% Internal API used by a reactivator process indicating it is done with the
-%% history log it has got so far.
-%% Timeout set to infinity since the tool may be busy, then the reactivator just
-%% have to wait. If the tool crashes the reactivator will be go down too automatically.
-reactivator_reply(TPid,Counter) ->
-    gen_server:call(TPid,{reactivator_reply,{Counter,self()}},infinity).
-%% -----------------------------------------------------------------------------
-
-
-%% =============================================================================
-%% gen_server implementation.
-%% =============================================================================
-
-init(Config) ->
-    case fetch_configuration(Config) of     % From conf-file and Config.
+    gen_server:call(?MODULE,{reconnect_nodes,Nodes},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% start_session()={ok,{SessionNr,InvisoReturn}} | {error,Reason}
+%% start_session(MoreTDGargs)=
+%%   MoreTDGargs=list(), prepended to the fixed list of args used when calling the
+%%     tracer data generator function.
+%%   SessionNr=integer(), trace sessions are numbered by the tool.
+%%   InvisoReturn=If successful inviso call, the returnvalue from inviso.
+%%     Note that individual nodes may be unsuccessful. See inviso:init_tracing/1
+%% Initiates tracing at all participating nodes.
+start_session() ->
+    start_session([]).
+start_session(MoreTDGargs) ->
+    gen_server:call(?MODULE,{start_session,MoreTDGargs},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% reinitiate_session(Nodes)={ok,InvisoReturn} | {error,Reason}
+%%   InvisoReturn=If successful inviso call, the returnvalue from inviso:init_tracing/1.
+%%     Note that individual nodes may be unsuccessful. Mentioned nodes not part
+%%       of the tool or not in state inactive will be marked as failing by the
+%%       tool in the InvisoReturn.
+%% To reinitate a node means to (inviso) init tracing at it according to saved
+%% tracer data generator arguments for the current session and then redo the current
+%% history to bring it up to speed. Note that the tool must be running a session
+%% for reinitiate to work.
+reinitiate_session() ->
+    gen_server:call(?MODULE,{reinitiate_session,local_runtime},?CALL_TIMEOUT).
+reinitiate_session(Nodes) ->
+    gen_server:call(?MODULE,{reinitiate_session,Nodes},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% restore_session()=
+%% restore_session(MoreTDGargs)=
+%% restore_session(FileName)=
+%% restore_session(FileName,MoreTDGargs)={ok,{SessionNr,InvisoReturn}} | {error,Reason}
+%% The two first clauses will start a new session using the last history. This
+%% implies that there must have been a session running prior.
+%% The two last clauses starts a session and reads a history file and executes the
+%% tracecases in it at all inactive nodes.
+%% In both cases the reused or read history becomes the current histoy, just if the
+%% session had been initiated manually. The tool may not
+%% have a session ongoing, and nodes already tracing (nodes which were adopted)
+%% are not effected. Just like when starting a session manually.
+restore_session() ->
+    restore_session([]).
+restore_session([]) ->                      % This cant be a filename.
+    gen_server:call(?MODULE,{restore_session,[]},?CALL_TIMEOUT);
+restore_session(FileNameOrMoreTDGargs) ->
+    case is_string(FileNameOrMoreTDGargs) of
+	true ->                             % Interpret it as a filename.
+	    restore_session(FileNameOrMoreTDGargs,[]);
+	false ->                            % The we want to use last session history!
+	    gen_server:call(?MODULE,{restore_session,FileNameOrMoreTDGargs},?CALL_TIMEOUT)
+    end.
+restore_session(FileName,MoreTDGargs) ->
+    gen_server:call(?MODULE,{restore_session,{FileName,MoreTDGargs}},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% stop_session()={ok,{SessionNr,Result}} | {error,Reason}
+%%   SessionNr=integer()
+%%   Result=[{Node,NodeResult},...] | NonDistributedNodeResult
+%%     NodeResult=ok | {error,Reason}
+%%     NonDistributedNodeResult=[ok] | []
+%% Stops inviso tracing at all participating nodes. The inviso runtime components
+%% will go to state idle. It is now time to fetch the logfiles. Will most often
+%% succeed. Will only return an error if the entire inviso call returned an
+%% error. Not if an individual node failed stop tracing successfully.
+%% Any running trace case, including reactivator processes will be terminated.
+stop_session() ->
+    gen_server:call(?MODULE,stop_session,?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% reset_nodes()=NodeResult | {error,Reason}
+%% reset_nodes(Nodes)={ok,NodeResults} | {error,Reason}
+%%   NodeResults and NodeResult as returned by inviso:clear/1 and /0.
+%% Clear nodes from trace flags, trace patterns and meta trace patterns. The tool
+%% must not be having a running session.
+reset_nodes() ->
+    gen_server:call(?MODULE,{reset_nodes,local_runtime},?CALL_TIMEOUT).
+reset_nodes(Nodes) ->
+    gen_server:call(?MODULE,{reset_nodes,Nodes},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% atc(TC,Id,Vars)=ok | {error,Reason}
+%%   TC=atom(), name of the trace case.
+%%   Id=term(), given name of this usage of TC.
+%%   Vars=list(), list of variable bindings [{Var,Value},...], Var=atom(),Value=term().
+%% Function activating a trace case. The trace case must be defined in the
+%% trace case dictionary. The 'ok' return value is only a signal that the
+%% trace case has started successfully. It may then run for as long as it is
+%% programmed to run. An erroneous return value does not necessarily mean that
+%% the trace case has not been executed. It rather means that is undetermined
+%% what happend.
+atc(TC,Id,Vars) ->
+    gen_server:call(?MODULE,{atc,{TC,Id,Vars}},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% sync_atc(TC,Id,Vars)=Result | {error,Reason}
+%% sync_atc(TC,Id,Vars,TimeOut)=
+%%   Result=term(), what ever is returned be the last expression in the trace case.
+%%   TimeOut=interger() | infinity, the max wait time for the trace case to finnish.
+%% As atc/3 but waits for the trace case to finish.
+sync_atc(TC,Id,Vars) ->
+    gen_server:call(?MODULE,{sync_atc,{TC,Id,Vars,?SYNC_TC_TIMEOUT}},?CALL_TIMEOUT).
+sync_atc(TC,Id,Vars,TimeOut) ->
+    gen_server:call(?MODULE,{sync_atc,{TC,Id,Vars,TimeOut}},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% sync_rtc(TC,Vars)=Result | {error,Reason}
+%% sync_rtc(TC,Vars,TimeOut)=
+%%   Result=term(), what ever is returned be the last expression in the trace case.
+%%   TimeOut=interger() | infinity, the max wait time for the trace case to finnish.
+%% As sync_atc/3 but the trace case is not marked as activated. It is mearly placed
+%% in the history. Hence with sync_rtc a trace case can be "activated" multiple time.
+sync_rtc(TC,Vars) ->
+    gen_server:call(?MODULE,{sync_rtc,{TC,Vars,?SYNC_TC_TIMEOUT}},?CALL_TIMEOUT).
+sync_rtc(TC,Vars,TimeOut) ->
+    gen_server:call(?MODULE,{sync_rtc,{TC,Vars,TimeOut}},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% dtc(TC,Id)=ok | {error,Reason}
+%% Deactivates a previosly activated trace case. This function can only be used
+%% on trace cases that has a deactivation defined in the trace case dictionary.
+%% There is of course really no difference between a file containing an activation
+%% compared to a deactivation. But to be able cancelling activations out from the
+%% history log, a defined deactivation is essential.
+%% As with activation, the returned 'ok' simply indicates the start of the trace
+%% case.
+dtc(TC,Id) ->
+    gen_server:call(?MODULE,{dtc,{TC,Id}},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% sync_dtc(TC,Id)=Result | {error,Reason}
+%% sync_dtc(TC,Id,TimeOut)=
+%%   Synchronous deactivation of trace case. See dtc/2 and sync_atc/3 for
+%%   parameters.
+sync_dtc(TC,Id) ->
+    gen_server:call(?MODULE,{sync_dtc,{TC,Id,?SYNC_TC_TIMEOUT}},?CALL_TIMEOUT).
+sync_dtc(TC,Id,TimeOut) ->
+    gen_server:call(?MODULE,{sync_dtc,{TC,Id,TimeOut}},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% inviso(Cmd,Args)=Result
+%%   Cmd=atom(), the (inviso) function name that shall be called.
+%%   Args=list(), the arguments to Cmd.
+%%   Result=term(), the result from the inviso function call.
+%% This function executes a Cmd in the inviso tool context. The inviso call will
+%% be logged in history log and thereby repeated in case of a reactivation.
+%% Note that this function is intended for use with inviso function API without
+%% specifying any nodes, since the function call is supposed to be carried out on
+%% all nodes.
+%% When these functions are written to an autostart config file by the tool there
+%% is supposed to be a translation to inviso_rt functions.
+inviso(Cmd,Args) ->
+    gen_server:call(?MODULE,{inviso,{Cmd,Args}},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% reactivate()=ok | {error,Reason}
+%% reactivate(Node)=ok | {error,Reason}
+%% Moves a runtime component from suspended to the state running. This can be
+%% done for both tracing and inactive nodes. The later is necessary since you
+%% may have stopped tracing with a node suspended.
+%% In case the node is tracing, commands in the command history log are redone at
+%% the node in questions.
+%% Note that this function returns 'ok' before the node is running. This because the
+%% the reactivated history is done by a separate process and there is no guarantee
+%% when it will be ready. The reactivated node will not be marked as running in
+%% the tool until done reactivating.
+%% Further it is important to understand that if there are "ongoing" tracecases
+%% (i.e tracecase scripts that are currently executing) and this node was running
+%% at the time that tracecase script started to execute, the list of nodes bound
+%% to the Nodes variable in that script executer includes this node. Making it
+%% no longer suspended makes it start executing inviso commands from where ever
+%% such are called. Hence the reactivation may be interferred by that tracecase.
+reactivate() ->                             % Non-distributed API.
+    reactivate(node()).
+reactivate(Node) ->
+    gen_server:call(?MODULE,{reactivate,Node},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% save_history(FileName)={ok,AbsFileName} | {error,Reason}
+%% Saves the currently collected command history log to a file. The file will
+%% be a binary-file. If FileName is an absolute path, it will be saved to that
+%% file. Otherwise the history dir will be used. If no history dir was specified
+%% the tool dir will be used, prepended to FileName.
+save_history(FileName) ->
+    gen_server:call(?MODULE,{save_history,FileName},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% get_autostart_data(Nodes,Dependency)={ok,{AutoStartData,NodeResults} |
+%%     {ok,{AutoStartData,NodeResult}} | {error,Reason}
+%%   Dependency=inviso dependency parameter which will be used for every
+%%     autostarted runtime component (included in Options).
+%%   NodeResults=[{Node,NodeResult},...]
+%%     NodeResult={ok,{Options,{tdg,{M,F,CompleteTDGargs}}}} | {error,Reason}
+%%       Options=add_nodes options to the inviso runtime component.
+%%       M,F=atom(), the module and function for tracerdata generation.
+%%       CompleteTDGargs=list(), all arguments as they are given to the tracer
+%%         data generator function.
+%%       AutostartData=[CaseSpec,...]
+%%         CaseSpec={file,{FileName,Bindings}} | {mfa,{M,F,Args}}
+%%           FileName=string(), pointing out the trace case file. Note that this
+%%             is the same as the path used by the tool.
+%%           Bindings=Var bindings used according to the history for the
+%%             invocation.
+%%           M,F=atom(), the function that shall be called (normally some inviso).
+%%           Args=list(), the actual arguments. Note that this may contain things
+%%             which can not be written to file (ports, pids,...).
+%% Function returning information on how to autostart a node to make it trace
+%% according to the current history. The inviso_tool does not know how to write
+%% the necessary files at the nodes in question. That must be done by the user
+%% of the tool, guided by the return value from this function.
+%% Note that there will be two types of trace case files. Regular trace case
+%% files and binaries returned from this function. The latter contains the
+%% inviso commands which have been executed. Note that the order amongst the
+%% trace cases and binaries is of importance (otherwise they will be redone in
+%% an incorrect order).
+get_autostart_data(Dependency) ->
+    gen_server:call(?MODULE,{get_autostart_data,Dependency},?CALL_TIMEOUT).
+get_autostart_data(Nodes,Dependency) ->
+    gen_server:call(?MODULE,{get_autostart_data,{Nodes,Dependency}},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% get_activities()={ok,Ongoing} | {error,Reason}
+%%   Ongoing=list(); [ [TraceCases] [,Reactivators] ]
+%%     TraceCases={tracecases,TraceCaseList}
+%%       TraceCaseList=[{{TCname,Id},Phase},...]
+%%         Phase=activating | deactivating
+%%     Reactivators={reactivating_nodes,ReactivatingNodes}
+%%       ReactivatingNodes=[Node,...]
+%% Returns a list of assynchronous tracecases and nodes doing reactivation at
+%% this momement. This can be useful to implement "home brewn" synchronization,
+%% waiting for the runtime components to reach a certain state.
+get_activities() ->
+    gen_server:call(?MODULE,get_activities,?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% get_status(Node)={ok,StateStatus} | {error,Reason}
+%%   StateStatus={State,Status} | reactivating | down
+%%     State=tracing | inactive | trace_failure
+%%     Status=running | suspended
+get_node_status() ->
+    get_node_status(local_runtime).
+get_node_status(Node) ->
+    gen_server:call(?MODULE,{get_node_status,Node},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% get_session_data()={ok,{Status,SessionNr,TDGargs}} | {error,Reason}
+%%   Status=tracing | not_tracing, info about current/last session.
+%%   SessionNr=integer()
+%%   TDGargs=list(), list of the arguments that will be given to the tracer data
+%%     generator function (not including the leading Nodes list).
+%% Returns data about the current or last session.
+get_session_data() ->
+    gen_server:call(?MODULE,get_session_data,?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% flush()={ok,NodeResults} | NodeResult | {error,Reason}
+%% flush(Nodes)={ok,NodesResults} | {error,Reason}
+%%   NodeResults=[{Node,NodeResult},...]
+%%   NodeResult=ok | {error,Reason}
+%% Makes runtime components flush their trace ports.
+flush() ->
+    gen_server:call(?MODULE,flush,?CALL_TIMEOUT).
+flush(Nodes) ->
+    gen_server:call(?MODULE,{flush,Nodes},?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% get_loopdata()=#ld
+%% Debug API returning the internal loopdata structure. See #ld above for details.
+get_loopdata() ->
+    gen_server:call(?MODULE,get_loopdata,?CALL_TIMEOUT).
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% Internal APIs.
+%% -----------------------------------------------------------------------------
+
+%% tc_executer_reply(To,Reply)=nothing significant
+%%   To=pid()
+%%   Reply=term()
+%% Internal API used by a trace case executer process to signal its completion.
+tc_executer_reply(To,Reply) ->
+    gen_server:cast(To,{tc_executer_reply,Reply}).
+%% -----------------------------------------------------------------------------
+
+%% Internal API used by a reactivator process indicating it is done with the
+%% history log it has got so far.
+%% Timeout set to infinity since the tool may be busy, then the reactivator just
+%% have to wait. If the tool crashes the reactivator will be go down too automatically.
+reactivator_reply(TPid,Counter) ->
+    gen_server:call(TPid,{reactivator_reply,{Counter,self()}},infinity).
+%% -----------------------------------------------------------------------------
+
+
+%% =============================================================================
+%% gen_server implementation.
+%% =============================================================================
+
+init(Config) ->
+    case fetch_configuration(Config) of     % From conf-file and Config.
 	{ok,LD} when is_record(LD,ld) ->
-	    case start_inviso_at_c_node(LD) of
-		{ok,CPid} ->
-		    LD2=start_runtime_components(LD),
-		    LD3=read_trace_case_definitions(LD2),
-		    process_flag(trap_exit,true),
-		    start_subscribe_inviso_events(LD3#ld.c_node),
-		    {ok,LD3#ld{c_pid=CPid}};
-		{error,Reason} ->           % Most likely already running.
-		    {stop,{error,Reason}}
-	    end;
-	{error,Reason} ->
-	    {stop,{error,{start_up,Reason}}}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Help function starting the inviso control component at node c_node, or "here"
-%% if it is not a distributed network.
-start_inviso_at_c_node(#ld{c_node=undefined}) -> % Non distributed case.
-    case inviso:start() of
-	{ok,Pid} ->
-	    {ok,Pid};
-	{error,Reason} ->
-	    {error,Reason}
-    end;
-start_inviso_at_c_node(#ld{c_node=CNode}) ->
-    case rpc:call(CNode,inviso,start,[]) of
-	{ok,Pid} ->
-	    {ok,Pid};
-	{error,{already_started,_}} ->      % A control component already started.
-	    {error,{inviso_control_already_running,CNode}};
-	{error,Reason} ->
-	    {error,Reason};
-	{badrpc,Reason} ->
-	    {error,{inviso_control_node_error,Reason}}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Help function starting the runtime components at all particapting nodes.
-%% It also updates the nodes structure in the #ld to indicate which nodes where
-%% successfully started. Returns a new #ld.
-%% Note that a runtime component may actually be running at one or several nodes.
-%% This is supposed to be the result of an (wanted) autostart. Meaning that the
-%% inviso tool can not handle the situation if a runtime component is not doing
-%% what it is supposed to do. In case a runtime component is already running it
-%% will be adopted and therefore marked as running.
-start_runtime_components(LD=#ld{c_node=undefined}) ->
-    start_runtime_components_2(local_runtime,undefined,LD);
-start_runtime_components(LD=#ld{c_node=CNode,nodes=NodesD}) ->
-    start_runtime_components_2(get_all_nodenames_nodes(NodesD),CNode,LD).
-start_runtime_components(Nodes,LD=#ld{c_node=CNode}) ->
-    start_runtime_components_2(Nodes,CNode,LD).
-
-start_runtime_components_2(local_runtime,CNode,LD=#ld{optg=OptG}) ->
-    Opts=start_runtime_components_mk_opts(local_runtime,OptG),
-    case inviso:add_node(mk_rt_tag(),Opts) of
-	{ok,NAnsw} ->                       % Should be more clever really!
-	    NewNodesD=update_added_nodes(CNode,{ok,NAnsw},LD#ld.nodes),
-	    LD#ld{nodes=NewNodesD};
-	{error,_Reason} ->
-	    LD
-    end;
-start_runtime_components_2([Node|Rest],CNode,LD=#ld{optg=OptG}) ->
-    Opts=start_runtime_components_mk_opts(Node,OptG),
-    case rpc:call(CNode,inviso,add_nodes,[[Node],mk_rt_tag(),Opts]) of
-	{ok,NodeResults} ->
-	    NewNodesD=update_added_nodes(CNode,NodeResults,LD#ld.nodes),
-	    start_runtime_components_2(Rest,CNode,LD#ld{nodes=NewNodesD});
-	{error,_Reason} ->
-	    start_runtime_components_2(Rest,CNode,LD);
-	{badrpc,_Reason} ->
-	    start_runtime_components_2(Rest,CNode,LD)
-    end;
-start_runtime_components_2([],_,LD) ->
-    LD.
-
-start_runtime_components_mk_opts(Node,{M,F,Args}) ->
-    case catch apply(M,F,[Node|Args]) of
+	    case start_inviso_at_c_node(LD) of
+		{ok,CPid} ->
+		    LD2=start_runtime_components(LD),
+		    LD3=read_trace_case_definitions(LD2),
+		    process_flag(trap_exit,true),
+		    start_subscribe_inviso_events(LD3#ld.c_node),
+		    {ok,LD3#ld{c_pid=CPid}};
+		{error,Reason} ->           % Most likely already running.
+		    {stop,{error,Reason}}
+	    end;
+	{error,Reason} ->
+	    {stop,{error,{start_up,Reason}}}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% Help function starting the inviso control component at node c_node, or "here"
+%% if it is not a distributed network.
+start_inviso_at_c_node(#ld{c_node=undefined}) -> % Non distributed case.
+    case inviso:start() of
+	{ok,Pid} ->
+	    {ok,Pid};
+	{error,Reason} ->
+	    {error,Reason}
+    end;
+start_inviso_at_c_node(#ld{c_node=CNode}) ->
+    case rpc:call(CNode,inviso,start,[]) of
+	{ok,Pid} ->
+	    {ok,Pid};
+	{error,{already_started,_}} ->      % A control component already started.
+	    {error,{inviso_control_already_running,CNode}};
+	{error,Reason} ->
+	    {error,Reason};
+	{badrpc,Reason} ->
+	    {error,{inviso_control_node_error,Reason}}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% Help function starting the runtime components at all particapting nodes.
+%% It also updates the nodes structure in the #ld to indicate which nodes where
+%% successfully started. Returns a new #ld.
+%% Note that a runtime component may actually be running at one or several nodes.
+%% This is supposed to be the result of an (wanted) autostart. Meaning that the
+%% inviso tool can not handle the situation if a runtime component is not doing
+%% what it is supposed to do. In case a runtime component is already running it
+%% will be adopted and therefore marked as running.
+start_runtime_components(LD=#ld{c_node=undefined}) ->
+    start_runtime_components_2(local_runtime,undefined,LD);
+start_runtime_components(LD=#ld{c_node=CNode,nodes=NodesD}) ->
+    start_runtime_components_2(get_all_nodenames_nodes(NodesD),CNode,LD).
+start_runtime_components(Nodes,LD=#ld{c_node=CNode}) ->
+    start_runtime_components_2(Nodes,CNode,LD).
+
+start_runtime_components_2(local_runtime,CNode,LD=#ld{optg=OptG}) ->
+    Opts=start_runtime_components_mk_opts(local_runtime,OptG),
+    case inviso:add_node(mk_rt_tag(),Opts) of
+	{ok,NAnsw} ->                       % Should be more clever really!
+	    NewNodesD=update_added_nodes(CNode,{ok,NAnsw},LD#ld.nodes),
+	    LD#ld{nodes=NewNodesD};
+	{error,_Reason} ->
+	    LD
+    end;
+start_runtime_components_2([Node|Rest],CNode,LD=#ld{optg=OptG}) ->
+    Opts=start_runtime_components_mk_opts(Node,OptG),
+    case rpc:call(CNode,inviso,add_nodes,[[Node],mk_rt_tag(),Opts]) of
+	{ok,NodeResults} ->
+	    NewNodesD=update_added_nodes(CNode,NodeResults,LD#ld.nodes),
+	    start_runtime_components_2(Rest,CNode,LD#ld{nodes=NewNodesD});
+	{error,_Reason} ->
+	    start_runtime_components_2(Rest,CNode,LD);
+	{badrpc,_Reason} ->
+	    start_runtime_components_2(Rest,CNode,LD)
+    end;
+start_runtime_components_2([],_,LD) ->
+    LD.
+
+start_runtime_components_mk_opts(Node,{M,F,Args}) ->
+    case catch apply(M,F,[Node|Args]) of
 	{ok,Opts} when is_list(Opts) ->
-	    start_runtime_component_mk_opts_add_dependency(Opts);
-	_ ->
-	    [?DEFAULT_DEPENDENCY]
-    end.
-
-%% The options generator is not supposed to generate the dependency. Hence this
-%% function adds and if necessary removes an incorrectly added dependency tag.
-start_runtime_component_mk_opts_add_dependency(Opts) ->
-    case lists:keysearch(dependency,1,Opts) of
-	{value,_} ->                           % Not allowed!!!
-	    [?DEFAULT_DEPENDENCY|lists:keydelete(dependecy,1,Opts)];
-	false ->
-	    [?DEFAULT_DEPENDENCY|Opts]
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Help function subscribing to inviso events from the inviso controller. This
-%% will make it possible to follow runtime components going down.
-start_subscribe_inviso_events(undefined) ->
-    inviso:subscribe();
-start_subscribe_inviso_events(CNode) ->
-    rpc:call(CNode,inviso,subscribe,[self()]). % Don't want the rpc-proc to subscribe!
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% gen_server handle call back functions.
-%% -----------------------------------------------------------------------------
-
-handle_call({stop,UntouchedNodes},_From,LD=#ld{nodes=NodesD,c_node=CNode,keep_nodes=KeepNodes})
-  when is_list(UntouchedNodes) ->
-    {stop,
-     normal,
-     remove_all_trace_patterns(CNode,
-			       UntouchedNodes++KeepNodes,
-			       get_available_nodes(NodesD)),
-     LD};
-handle_call({stop,BadArg},_From,LD) ->
-    {reply,{error,{badarg,BadArg}},LD};
-
-handle_call({reconnect_nodes,Nodes},_From,LD) ->
-    case h_reconnect_nodes(Nodes,LD) of
-	{ok,{Nodes2,NodesErr,NewLD}} ->
-	    if
-		Nodes==local_runtime ->
-		    {reply,
-		     build_reconnect_nodes_reply(Nodes,Nodes2,NodesErr,NewLD#ld.nodes),
-		     NewLD};
+	    start_runtime_component_mk_opts_add_dependency(Opts);
+	_ ->
+	    [?DEFAULT_DEPENDENCY]
+    end.
+
+%% The options generator is not supposed to generate the dependency. Hence this
+%% function adds and if necessary removes an incorrectly added dependency tag.
+start_runtime_component_mk_opts_add_dependency(Opts) ->
+    case lists:keysearch(dependency,1,Opts) of
+	{value,_} ->                           % Not allowed!!!
+	    [?DEFAULT_DEPENDENCY|lists:keydelete(dependecy,1,Opts)];
+	false ->
+	    [?DEFAULT_DEPENDENCY|Opts]
+    end.
+%% -----------------------------------------------------------------------------
+
+%% Help function subscribing to inviso events from the inviso controller. This
+%% will make it possible to follow runtime components going down.
+start_subscribe_inviso_events(undefined) ->
+    inviso:subscribe();
+start_subscribe_inviso_events(CNode) ->
+    rpc:call(CNode,inviso,subscribe,[self()]). % Don't want the rpc-proc to subscribe!
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% gen_server handle call back functions.
+%% -----------------------------------------------------------------------------
+
+handle_call({stop,UntouchedNodes},_From,LD=#ld{nodes=NodesD,c_node=CNode,keep_nodes=KeepNodes})
+  when is_list(UntouchedNodes) ->
+    {stop,
+     normal,
+     remove_all_trace_patterns(CNode,
+			       UntouchedNodes++KeepNodes,
+			       get_available_nodes(NodesD)),
+     LD};
+handle_call({stop,BadArg},_From,LD) ->
+    {reply,{error,{badarg,BadArg}},LD};
+
+handle_call({reconnect_nodes,Nodes},_From,LD) ->
+    case h_reconnect_nodes(Nodes,LD) of
+	{ok,{Nodes2,NodesErr,NewLD}} ->
+	    if
+		Nodes==local_runtime ->
+		    {reply,
+		     build_reconnect_nodes_reply(Nodes,Nodes2,NodesErr,NewLD#ld.nodes),
+		     NewLD};
 		is_list(Nodes) ->
-		    {reply,
-		     {ok,build_reconnect_nodes_reply(Nodes,Nodes2,NodesErr,NewLD#ld.nodes)},
-		     NewLD}
-	    end;
-	{error,Reason} ->
-	    {reply,{error,Reason},LD}
-    end;
-
-handle_call({start_session,MoreTDGargs},_From,LD=#ld{session_state=SState}) ->
-    case is_tracing(SState) of
-	false ->                               % No session running.
-	    if
+		    {reply,
+		     {ok,build_reconnect_nodes_reply(Nodes,Nodes2,NodesErr,NewLD#ld.nodes)},
+		     NewLD}
+	    end;
+	{error,Reason} ->
+	    {reply,{error,Reason},LD}
+    end;
+
+handle_call({start_session,MoreTDGargs},_From,LD=#ld{session_state=SState}) ->
+    case is_tracing(SState) of
+	false ->                               % No session running.
+	    if
 		is_list(MoreTDGargs) ->
-		    DateTime=calendar:universal_time(),
-		    {M,F,Args}=LD#ld.tdg,
-		    TDGargs=inviso_tool_lib:mk_tdg_args(DateTime,MoreTDGargs++Args),
-		    case h_start_session(M,F,TDGargs,LD) of
-			{ok,{SessionNr,ReturnVal,NewLD}} -> % No nodes to initiate.
-			    NewLD2=add_initial_tcs_to_history(NewLD#ld.initial_tcs,
-							      NewLD#ld{chl=mk_chl(LD#ld.chl)}),
-			    {reply,
-			     {ok,{SessionNr,ReturnVal}},
-			     NewLD2#ld{session_state=tracing_sessionstate()}};
-			{ok,{SessionNr,ReturnVal,Nodes2,NewLD}} ->
-			    NewLD2=do_initial_tcs(NewLD#ld.initial_tcs,
-						  Nodes2,
-						  NewLD#ld{chl=mk_chl(LD#ld.chl)}),
-			    {reply,
-			     {ok,{SessionNr,ReturnVal}},
-			     NewLD2#ld{session_state=tracing_sessionstate()}};
-			{error,Reason} ->
-			    {reply,{error,Reason},LD}
-		    end;
-		true ->                        % Faulty TDGargs.
-		    {reply,{error,{badarg,MoreTDGargs}},LD}
-	    end;
-	true ->
-	    {reply,{error,session_already_started},LD}
-    end;
-
-handle_call({reinitiate_session,Nodes},_From,LD=#ld{session_state=SState}) ->
-    case is_tracing(SState) of
-	true ->                                % The tool must be tracing.
-	    {M,F,_Args}=LD#ld.tdg,
-	    TDGargs=get_latest_tdgargs_tracer_data(LD#ld.tracer_data),
-	    case h_reinitiate_session(Nodes,M,F,TDGargs,LD) of
-		{ok,{NodesErr,ReturnVal,NewLD}} ->
-		    {reply,
-		     {ok,build_reinitiate_session_reply(Nodes,NodesErr,ReturnVal)},
-		     NewLD};
-		{error,Reason} ->
-		    {reply,{error,Reason},LD}
-	    end;
-	false ->                               % Must have a running session!
-	    {reply,{error,no_session},LD}
-    end;
-
-handle_call({restore_session,{FileName,MoreTDGargs}},_From,LD=#ld{chl=OldCHL})
+		    DateTime=calendar:universal_time(),
+		    {M,F,Args}=LD#ld.tdg,
+		    TDGargs=inviso_tool_lib:mk_tdg_args(DateTime,MoreTDGargs++Args),
+		    case h_start_session(M,F,TDGargs,LD) of
+			{ok,{SessionNr,ReturnVal,NewLD}} -> % No nodes to initiate.
+			    NewLD2=add_initial_tcs_to_history(NewLD#ld.initial_tcs,
+							      NewLD#ld{chl=mk_chl(LD#ld.chl)}),
+			    {reply,
+			     {ok,{SessionNr,ReturnVal}},
+			     NewLD2#ld{session_state=tracing_sessionstate()}};
+			{ok,{SessionNr,ReturnVal,Nodes2,NewLD}} ->
+			    NewLD2=do_initial_tcs(NewLD#ld.initial_tcs,
+						  Nodes2,
+						  NewLD#ld{chl=mk_chl(LD#ld.chl)}),
+			    {reply,
+			     {ok,{SessionNr,ReturnVal}},
+			     NewLD2#ld{session_state=tracing_sessionstate()}};
+			{error,Reason} ->
+			    {reply,{error,Reason},LD}
+		    end;
+		true ->                        % Faulty TDGargs.
+		    {reply,{error,{badarg,MoreTDGargs}},LD}
+	    end;
+	true ->
+	    {reply,{error,session_already_started},LD}
+    end;
+
+handle_call({reinitiate_session,Nodes},_From,LD=#ld{session_state=SState}) ->
+    case is_tracing(SState) of
+	true ->                                % The tool must be tracing.
+	    {M,F,_Args}=LD#ld.tdg,
+	    TDGargs=get_latest_tdgargs_tracer_data(LD#ld.tracer_data),
+	    case h_reinitiate_session(Nodes,M,F,TDGargs,LD) of
+		{ok,{NodesErr,ReturnVal,NewLD}} ->
+		    {reply,
+		     {ok,build_reinitiate_session_reply(Nodes,NodesErr,ReturnVal)},
+		     NewLD};
+		{error,Reason} ->
+		    {reply,{error,Reason},LD}
+	    end;
+	false ->                               % Must have a running session!
+	    {reply,{error,no_session},LD}
+    end;
+
+handle_call({restore_session,{FileName,MoreTDGargs}},_From,LD=#ld{chl=OldCHL})
   when is_list(MoreTDGargs) ->
-    case is_tracing(LD#ld.session_state) of
-	false ->
-	    case catch make_absolute_path(FileName,LD#ld.dir) of
+    case is_tracing(LD#ld.session_state) of
+	false ->
+	    case catch make_absolute_path(FileName,LD#ld.dir) of
 		AbsFileName when is_list(AbsFileName) ->
-		    case file:read_file(AbsFileName) of
-			{ok,Bin} ->
-			    if
+		    case file:read_file(AbsFileName) of
+			{ok,Bin} ->
+			    if
 				is_list(MoreTDGargs) ->
-				    case catch replace_history_chl(OldCHL,
-								   binary_to_term(Bin)) of
-					{ok,CHL} -> % The file was well formatted.
-					    case h_restore_session(MoreTDGargs,
-								   LD#ld{chl=CHL}) of
-						{ok,{SessionNr,ReturnVal,NewLD}} ->
-						    {reply,
-						     {ok,{SessionNr,ReturnVal}},
-						     NewLD#ld{session_state=
-							      tracing_sessionstate()}};
-						{error,Reason} ->
-						    {reply,{error,Reason},LD}
-					    end;
-					Error -> % Badly formatted file.
-					    {reply,
-					     {error,{bad_file,{AbsFileName,Error}}},
-					     LD}
-				    end;
-				true ->
-				    {reply,{error,{badarg,MoreTDGargs}},LD}
-			    end;
-			{error,Reason} ->
-			    {reply,{error,{read_file,Reason}},LD}
-		    end;
-		Error ->
-		    {reply,{error,{bad_filename,{FileName,Error}}},LD}
-	    end;
-	true ->
-	    {reply,{error,session_already_started},LD}
-    end;
-%% This is doing restore session on the current history.
-handle_call({restore_session,MoreTDGargs},_From,LD=#ld{chl=CHL}) ->
-    case is_tracing(LD#ld.session_state) of
-	false ->
-	    case history_exists_chl(CHL) of
-		true ->                        % There is a history to redo.
-		    if
+				    case catch replace_history_chl(OldCHL,
+								   binary_to_term(Bin)) of
+					{ok,CHL} -> % The file was well formatted.
+					    case h_restore_session(MoreTDGargs,
+								   LD#ld{chl=CHL}) of
+						{ok,{SessionNr,ReturnVal,NewLD}} ->
+						    {reply,
+						     {ok,{SessionNr,ReturnVal}},
+						     NewLD#ld{session_state=
+							      tracing_sessionstate()}};
+						{error,Reason} ->
+						    {reply,{error,Reason},LD}
+					    end;
+					Error -> % Badly formatted file.
+					    {reply,
+					     {error,{bad_file,{AbsFileName,Error}}},
+					     LD}
+				    end;
+				true ->
+				    {reply,{error,{badarg,MoreTDGargs}},LD}
+			    end;
+			{error,Reason} ->
+			    {reply,{error,{read_file,Reason}},LD}
+		    end;
+		Error ->
+		    {reply,{error,{bad_filename,{FileName,Error}}},LD}
+	    end;
+	true ->
+	    {reply,{error,session_already_started},LD}
+    end;
+%% This is doing restore session on the current history.
+handle_call({restore_session,MoreTDGargs},_From,LD=#ld{chl=CHL}) ->
+    case is_tracing(LD#ld.session_state) of
+	false ->
+	    case history_exists_chl(CHL) of
+		true ->                        % There is a history to redo.
+		    if
 			is_list(MoreTDGargs) ->
-			    case h_restore_session(MoreTDGargs,LD) of
-				{ok,{SessionNr,ReturnVal,NewLD}} ->
-				    {reply,
-				     {ok,{SessionNr,ReturnVal}},
-				     NewLD#ld{session_state=tracing_sessionstate()}};
-				{error,Reason} ->
-				    {reply,{error,Reason},LD}
-			    end;
-			true ->
-			    {reply,{error,{badarg,MoreTDGargs}},LD}
-		    end;
-		false ->
-		    {reply,{error,no_history},LD}
-	    end;
-	true ->
-	    {reply,{error,session_already_started},LD}
-    end;
-
-%% To stop tracing means stop_tracing through the inviso API. But we must also
-%% remove any help processes executing inviso commands (trace case executers
-%% and reactivators).
-%% Note that to be really sure we should actually wait for EXIT-signals from those
-%% processes before returning a successful returnvalue to the caller. In theory
-%% those processes could issue an inviso call effecting a new trace session started
-%% with init_tracing shortly after the call to stop_tracing. But too complicated! :-)
-%% Further, stop-tracing is done on all nodes in our nodes structure. Regardless
-%% if the node is tracing or not
-handle_call(stop_session,_From,LD=#ld{session_state=SState,chl=CHL,reactivators=ReAct}) ->
-    case is_tracing(SState) of
-	true ->
-	    NewCHL=stop_all_tc_executer_chl(CHL), % Stop any running trace case proc.
-	    NewReAct=stop_all_reactivators(ReAct),  % Stop any running reactivators.
-	    case h_stop_session(LD) of
-		{ok,{SessionNr,Result}} ->
-		    NewNodesD=set_inactive_nodes(Result,LD#ld.nodes),
-		    {reply,
-		     {ok,{SessionNr,Result}},
-		     LD#ld{session_state=passive_sessionstate(),
-			   nodes=NewNodesD,
-			   chl=NewCHL,
-			   reactivators=NewReAct,
-			   started_initial_tcs=[]}};
-		{error,Reason} ->           % Now we're really in deep shit :-)
-		    {reply,{error,{unrecoverable,Reason}},LD}
-	    end;
-	false ->
-	    {reply,{error,no_session},LD}
-    end;
-
-handle_call({reset_nodes,Nodes},_From,LD=#ld{session_state=SState}) ->
-    case is_tracing(SState) of
-	false ->                            % We can not be in a session.
-	    {reply,h_reset_nodes(Nodes,LD#ld.c_node),LD};
-	true ->
-	    {reply,{error,session_active},LD}
-    end;
-
-%% Calling a trace-case, or "turning it on".
-handle_call({atc,{TC,Id,Vars}},_From,LD=#ld{session_state=SState}) ->
-    case is_tracing(SState) of              % Check that we are tracing now.
-	true ->
-	    case h_atc(TC,Id,Vars,LD) of
-		{ok,NewLD} ->               % Trace case executed.
-		    {reply,ok,NewLD};
-		{error,Reason} ->
-		    {reply,{error,Reason},LD}
-	    end;
-	false ->                            % Can't activate if not tracing.
-	    {reply,{error,no_session},LD}
-    end;
-
-handle_call({sync_atc,{TC,Id,Vars,TimeOut}},_From,LD=#ld{session_state=SState}) ->
-    case is_tracing(SState) of
-	true ->
-	    if
+			    case h_restore_session(MoreTDGargs,LD) of
+				{ok,{SessionNr,ReturnVal,NewLD}} ->
+				    {reply,
+				     {ok,{SessionNr,ReturnVal}},
+				     NewLD#ld{session_state=tracing_sessionstate()}};
+				{error,Reason} ->
+				    {reply,{error,Reason},LD}
+			    end;
+			true ->
+			    {reply,{error,{badarg,MoreTDGargs}},LD}
+		    end;
+		false ->
+		    {reply,{error,no_history},LD}
+	    end;
+	true ->
+	    {reply,{error,session_already_started},LD}
+    end;
+
+%% To stop tracing means stop_tracing through the inviso API. But we must also
+%% remove any help processes executing inviso commands (trace case executers
+%% and reactivators).
+%% Note that to be really sure we should actually wait for EXIT-signals from those
+%% processes before returning a successful returnvalue to the caller. In theory
+%% those processes could issue an inviso call effecting a new trace session started
+%% with init_tracing shortly after the call to stop_tracing. But too complicated! :-)
+%% Further, stop-tracing is done on all nodes in our nodes structure. Regardless
+%% if the node is tracing or not
+handle_call(stop_session,_From,LD=#ld{session_state=SState,chl=CHL,reactivators=ReAct}) ->
+    case is_tracing(SState) of
+	true ->
+	    NewCHL=stop_all_tc_executer_chl(CHL), % Stop any running trace case proc.
+	    NewReAct=stop_all_reactivators(ReAct),  % Stop any running reactivators.
+	    case h_stop_session(LD) of
+		{ok,{SessionNr,Result}} ->
+		    NewNodesD=set_inactive_nodes(Result,LD#ld.nodes),
+		    {reply,
+		     {ok,{SessionNr,Result}},
+		     LD#ld{session_state=passive_sessionstate(),
+			   nodes=NewNodesD,
+			   chl=NewCHL,
+			   reactivators=NewReAct,
+			   started_initial_tcs=[]}};
+		{error,Reason} ->           % Now we're really in deep shit :-)
+		    {reply,{error,{unrecoverable,Reason}},LD}
+	    end;
+	false ->
+	    {reply,{error,no_session},LD}
+    end;
+
+handle_call({reset_nodes,Nodes},_From,LD=#ld{session_state=SState}) ->
+    case is_tracing(SState) of
+	false ->                            % We can not be in a session.
+	    {reply,h_reset_nodes(Nodes,LD#ld.c_node),LD};
+	true ->
+	    {reply,{error,session_active},LD}
+    end;
+
+%% Calling a trace-case, or "turning it on".
+handle_call({atc,{TC,Id,Vars}},_From,LD=#ld{session_state=SState}) ->
+    case is_tracing(SState) of              % Check that we are tracing now.
+	true ->
+	    case h_atc(TC,Id,Vars,LD) of
+		{ok,NewLD} ->               % Trace case executed.
+		    {reply,ok,NewLD};
+		{error,Reason} ->
+		    {reply,{error,Reason},LD}
+	    end;
+	false ->                            % Can't activate if not tracing.
+	    {reply,{error,no_session},LD}
+    end;
+
+handle_call({sync_atc,{TC,Id,Vars,TimeOut}},_From,LD=#ld{session_state=SState}) ->
+    case is_tracing(SState) of
+	true ->
+	    if
 		is_integer(TimeOut);TimeOut==infinity ->
-		    case h_sync_atc(TC,Id,Vars,TimeOut,LD) of
-			{ok,NewLD,Result} ->
-			    {reply,Result,NewLD};
-			{error,Reason} ->
-			    {reply,{error,Reason},LD}
-		    end;
-		true ->
-		    {reply,{error,{badarg,TimeOut}},LD}
-	    end;
-	false ->
-	    {reply,{error,no_session},LD}
-    end;
-
-handle_call({sync_rtc,{TC,Vars,TimeOut}},_From,LD=#ld{session_state=SState}) ->
-    case is_tracing(SState) of
-	true ->
-	    if
+		    case h_sync_atc(TC,Id,Vars,TimeOut,LD) of
+			{ok,NewLD,Result} ->
+			    {reply,Result,NewLD};
+			{error,Reason} ->
+			    {reply,{error,Reason},LD}
+		    end;
+		true ->
+		    {reply,{error,{badarg,TimeOut}},LD}
+	    end;
+	false ->
+	    {reply,{error,no_session},LD}
+    end;
+
+handle_call({sync_rtc,{TC,Vars,TimeOut}},_From,LD=#ld{session_state=SState}) ->
+    case is_tracing(SState) of
+	true ->
+	    if
 		is_integer(TimeOut);TimeOut==infinity ->
-		    case h_sync_rtc(TC,Vars,TimeOut,LD) of
-			{ok,NewLD,Result} ->
-			    {reply,Result,NewLD};
-			{error,Reason} ->
-			    {reply,{error,Reason},LD}
-		    end;
-		true ->
-		    {reply,{error,{badarg,TimeOut}},LD}
-	    end;
-	false ->
-	    {reply,{error,no_session},LD}
-    end;
-
-
-handle_call({dtc,{TC,Id}},_From,LD=#ld{session_state=SState}) ->
-    case is_tracing(SState) of              % Check that we are tracing now.
-	true ->
-	    case h_dtc(TC,Id,LD) of
-		{ok,NewLD} ->
-		    {reply,ok,NewLD};
-		{error,Reason} ->
-		    {reply,{error,Reason},LD}
-	    end;
-	false ->                            % Can't activate if not tracing.
-	    {reply,{error,no_session},LD}
-    end;
-
-handle_call({sync_dtc,{TC,Id,TimeOut}},_From,LD=#ld{session_state=SState}) ->
-    case is_tracing(SState) of              % Check that we are tracing now.
-	true ->
-	    if
+		    case h_sync_rtc(TC,Vars,TimeOut,LD) of
+			{ok,NewLD,Result} ->
+			    {reply,Result,NewLD};
+			{error,Reason} ->
+			    {reply,{error,Reason},LD}
+		    end;
+		true ->
+		    {reply,{error,{badarg,TimeOut}},LD}
+	    end;
+	false ->
+	    {reply,{error,no_session},LD}
+    end;
+
+
+handle_call({dtc,{TC,Id}},_From,LD=#ld{session_state=SState}) ->
+    case is_tracing(SState) of              % Check that we are tracing now.
+	true ->
+	    case h_dtc(TC,Id,LD) of
+		{ok,NewLD} ->
+		    {reply,ok,NewLD};
+		{error,Reason} ->
+		    {reply,{error,Reason},LD}
+	    end;
+	false ->                            % Can't activate if not tracing.
+	    {reply,{error,no_session},LD}
+    end;
+
+handle_call({sync_dtc,{TC,Id,TimeOut}},_From,LD=#ld{session_state=SState}) ->
+    case is_tracing(SState) of              % Check that we are tracing now.
+	true ->
+	    if
 		is_integer(TimeOut);TimeOut==infinity ->
-		    case h_sync_dtc(TC,Id,TimeOut,LD) of
-			{ok,NewLD,Result} ->
-			    {reply,Result,NewLD};
-			{error,Reason} ->
-			    {reply,{error,Reason},LD}
-		    end;
-		true ->
-		    {reply,{error,{badarg,TimeOut}},LD}
-	    end;
-	false ->                            % Can't activate if not tracing.
-	    {reply,{error,no_session},LD}
-    end;
-
-handle_call({inviso,{Cmd,Args}},_From,LD=#ld{session_state=SState}) ->
-    case is_tracing(SState) of
-	true ->
-	    if
+		    case h_sync_dtc(TC,Id,TimeOut,LD) of
+			{ok,NewLD,Result} ->
+			    {reply,Result,NewLD};
+			{error,Reason} ->
+			    {reply,{error,Reason},LD}
+		    end;
+		true ->
+		    {reply,{error,{badarg,TimeOut}},LD}
+	    end;
+	false ->                            % Can't activate if not tracing.
+	    {reply,{error,no_session},LD}
+    end;
+
+handle_call({inviso,{Cmd,Args}},_From,LD=#ld{session_state=SState}) ->
+    case is_tracing(SState) of
+	true ->
+	    if
 		is_list(Args) ->
-		    case h_inviso(Cmd,Args,LD) of
-			{ok,{Reply,NewLD}} ->
-			    {reply,Reply,NewLD};
-			{error,Reason} ->
-			    {reply,{error,Reason},LD}
-		    end;
-		true ->
-		    {reply,{error,{badarg,Args}},LD}
-	    end;
-	false ->                            % Can't do if not tracing.
-	    {reply,{error,no_session},LD}
-    end;
-
-handle_call({reactivate,Node},_From,LD=#ld{nodes=NodesD,c_node=CNode}) ->
-    case get_state_nodes(Node,NodesD) of
-	{trace_failure,_} ->
-	    {reply,{error,trace_failure},LD};
-	{State,suspended} ->                % The node is infact suspended.
-	    case h_reactivate(Node,CNode) of
-		ok ->
-		    case {State,is_tracing(LD#ld.session_state)} of
-			{tracing,true} ->   % Only then shall we redo cmds.
-			    {reply,ok,redo_cmd_history(Node,LD)};
-			_ ->                % All other just no longer suspended.
-			    {reply,ok,LD#ld{nodes=set_running_nodes(Node,NodesD)}}
-		    end;
-		{error,Reason} ->
-		    {reply,{error,Reason},LD}
-	    end;
-	reactivating ->
-	    {reply,{error,reactivating},LD};
-	{_,running} ->
-	    {reply,{error,already_running},LD};
-	down ->
-	    {reply,{error,not_available},LD};
-	false ->
-	    {reply,{error,unknown_node},LD}
-    end;
-
-handle_call({save_history,FileName},_From,LD=#ld{chl=CHL,dir=Dir,history_dir=HDir}) ->
-    case lists:keysort(2,get_loglist_chl(CHL)) of
-	[] ->                               % Empty history or no history.
-	    {reply,{error,no_history},LD};
-	Log ->
-	    case h_save_history(HDir,Dir,FileName,Log) of
-		{ok,AbsFileName} ->
-		    {reply,{ok,AbsFileName},LD};
-		{error,Reason} ->
-		    {reply,{error,Reason},LD}
-	    end
-    end;
-
-
-handle_call({get_autostart_data,{Nodes,Dependency}},_From,LD=#ld{chl=CHL}) ->
-    case build_autostart_data(lists:keysort(2,get_loglist_chl(CHL)),LD#ld.tc_dict) of
-	{ok,ASD} ->
-	    TDGargs=get_latest_tdgargs_tracer_data(LD#ld.tracer_data),
-	    {M,F,_}=LD#ld.tdg,
-	    OptsG=LD#ld.optg,                       % Addnodes options generator.
-	    {reply,
-	     h_get_autostart_data(Nodes,LD#ld.c_node,Dependency,ASD,M,F,TDGargs,OptsG),
-	     LD};
-	{error,Reason} ->                           % Bad datatypes in command args.
-	    {reply,{error,Reason},LD}
-    end;
-
-handle_call({get_autostart_data,Dependency},From,LD=#ld{c_node=undefined}) ->
-    handle_call({get_autostart_data,{local_runtime,Dependency}},From,LD);
-handle_call({get_autostart_data,Dependency},From,LD=#ld{nodes=NodesD}) ->
-    Nodes=get_all_nodenames_nodes(NodesD),
-    handle_call({get_autostart_data,{local_runtime,{Nodes,Dependency}}},From,LD);
-
-handle_call(get_activities,_From,LD=#ld{chl=CHL,reactivators=Reactivators}) ->
-    TraceCases=get_ongoing_chl(CHL),
-    RNodes=get_all_nodes_reactivators(Reactivators),
-    ReturnList1=
-	if
-	    TraceCases==[] ->
-		[];
-	    true ->
-		[{tracecases,TraceCases}]
-	end,
-    ReturnList2=
-	if
-	    RNodes==[] ->
-		ReturnList1;
-	    true ->
-		[{reactivating_nodes,RNodes}|ReturnList1]
-	end,
-    {reply,{ok,ReturnList2},LD};
-
-handle_call({get_node_status,Node},_Node,LD) ->
-    case get_state_nodes(Node,LD#ld.nodes) of
-	false ->
-	    {reply,{error,unknown_node},LD};
-	StateStatus ->
-	    {reply,{ok,StateStatus},LD}
-    end;
-
-handle_call(get_session_data,_From,LD=#ld{session_state=SState,tracer_data=TD}) ->
-    case get_latest_session_nr_tracer_data(TD) of
-	undefined ->
-	    {reply,{error,no_session},LD};
-	SessionNr ->
-	    TDGargs=get_latest_tdgargs_tracer_data(TD),
-	    case is_tracing(SState) of
-		true ->
-		    {reply,{ok,{tracing,SessionNr,TDGargs}},LD};
-		false ->
-		    {reply,{ok,{not_tracing,SessionNr,TDGargs}},LD}
-	    end
-    end;
-
-handle_call(flush,_From,LD=#ld{c_node=CNode,nodes=NodesD}) ->
-    Nodes=get_tracing_nodes(NodesD),
-    {reply,h_flush(CNode,Nodes),LD};
-handle_call({flush,Nodes},_From,LD=#ld{c_node=CNode}) ->
-    {reply,h_flush(CNode,Nodes),LD};
-
-handle_call(get_loopdata,_From,LD) ->
-    {reply,LD,LD};
-
-%% Internal handle_call callbacks.
-
-handle_call({reactivator_reply,{Counter,RPid}},_From,LD=#ld{chl=CHL}) ->
-    HighestUsedCounter=get_highest_used_counter_chl(CHL),
-    if
-	HighestUsedCounter>Counter ->       % There are now more log entries.
-	    NewUnsortedLog=get_loglist_chl(CHL),
-	    {reply,{more,NewUnsortedLog},LD};
-	true ->                             % No Counter is youngest log entry.
-	    NodesD=LD#ld.nodes,
-	    Node=get_node_reactivators(RPid,LD#ld.reactivators),
-	    {reply,
-	     done,
-	     LD#ld{nodes=set_running_nodes(Node,NodesD),
-		   reactivators=del_reactivators(RPid,LD#ld.reactivators)}}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Handling a notification from a trace case execution process. Receiving this
-%% indicated that this phase of the trace case is finnished.
-handle_cast({tc_executer_reply,{Phase,ProcH,Result}},LD) ->
-    case Phase of
-	activating ->                       % The trace case is running now.
-	    {ok,NewLD}=h_tc_activation_done(ProcH,Result,LD),
-	    {noreply,NewLD};
-	stopping ->
-	    {ok,NewLD}=h_tc_stopping_done(ProcH,Result,LD),
-	    {noreply,NewLD};
-	_ ->
-	    {noreply,LD}
-    end;
-handle_cast(_,LD) ->
-    {noreply,LD}.
-%% -----------------------------------------------------------------------------
-
-%% This is the case when a runtime component goes down. We stop all running
-%% reactivators for this node. Note that there can also be tracecases ongoing
-%% where this node is part of the Nodes variable. But there is not much we can
-%% do about that. Other then informing the user that it is unwise to reconnect
-%% this node before those tracecases have stopped being ongoing.
-handle_info({inviso_event,_CNode,_Time,{disconnected,Node,_}},LD) ->
-    {noreply,LD#ld{nodes=set_down_nodes(Node,LD#ld.nodes),
-		   reactivators=stop_node_reactivators(Node,LD#ld.reactivators)}};
-
-%% This is the case when a runtime component gets suspended. Much of the same
-%% problem as described above applies.
-handle_info({inviso_event,_CNode,_Time,{state_change,Node,{_,{suspended,_}}}},LD) ->
-    {noreply,LD#ld{nodes=set_suspended_nodes(Node,LD#ld.nodes),
-		   reactivators=stop_node_reactivators(Node,LD#ld.reactivators)}};
-
-handle_info(_,LD) ->
-    {noreply,LD}.
-%% -----------------------------------------------------------------------------
-
-%% Called when the tool server stops. First clause, termination is initiated by
-%% our self and therefore controlled another way. In the second case we are
-%% stopping for some external reason, and we must then do more here in terminate/2.
-terminate(normal,#ld{c_node=CNode}) ->      % This is when we are stopping our self.
-    stop_inviso_at_c_node(CNode);
-terminate(_,#ld{c_node=CNode,nodes=NodesD,keep_nodes=KeepNodes}) ->
-    remove_all_trace_patterns(CNode,KeepNodes,get_all_nodenames_nodes(NodesD)),
-    stop_inviso_at_c_node(CNode).
-%% -----------------------------------------------------------------------------
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-%% =============================================================================
-%% Handler first level help functions.
-%% =============================================================================
-
-%% -----------------------------------------------------------------------------
-%% reconnect_nodes
-%% -----------------------------------------------------------------------------
-
-%% Help function reconnecting the nodes in Nodes. Listed nodes must be part of
-%% the set of nodes handled by the tool. It is not possible to reconnect a node
-%% that is not marked as down. This partly because we otherwise risk losing the
-%% trace_failure state (which can not be rediscovered).
-h_reconnect_nodes(local_runtime,LD=#ld{nodes=NodesD}) -> % Non-distributed.
-    case get_state_nodes(local_runtime,NodesD) of
-	down ->
-	    {ok,{local_runtime,[],start_runtime_components(local_runtime,LD)}};
-	_ ->                                   % Allready connected!
-	    {ok,{[],{error,already_connected},LD}}
-    end;
+		    case h_inviso(Cmd,Args,LD) of
+			{ok,{Reply,NewLD}} ->
+			    {reply,Reply,NewLD};
+			{error,Reason} ->
+			    {reply,{error,Reason},LD}
+		    end;
+		true ->
+		    {reply,{error,{badarg,Args}},LD}
+	    end;
+	false ->                            % Can't do if not tracing.
+	    {reply,{error,no_session},LD}
+    end;
+
+handle_call({reactivate,Node},_From,LD=#ld{nodes=NodesD,c_node=CNode}) ->
+    case get_state_nodes(Node,NodesD) of
+	{trace_failure,_} ->
+	    {reply,{error,trace_failure},LD};
+	{State,suspended} ->                % The node is infact suspended.
+	    case h_reactivate(Node,CNode) of
+		ok ->
+		    case {State,is_tracing(LD#ld.session_state)} of
+			{tracing,true} ->   % Only then shall we redo cmds.
+			    {reply,ok,redo_cmd_history(Node,LD)};
+			_ ->                % All other just no longer suspended.
+			    {reply,ok,LD#ld{nodes=set_running_nodes(Node,NodesD)}}
+		    end;
+		{error,Reason} ->
+		    {reply,{error,Reason},LD}
+	    end;
+	reactivating ->
+	    {reply,{error,reactivating},LD};
+	{_,running} ->
+	    {reply,{error,already_running},LD};
+	down ->
+	    {reply,{error,not_available},LD};
+	false ->
+	    {reply,{error,unknown_node},LD}
+    end;
+
+handle_call({save_history,FileName},_From,LD=#ld{chl=CHL,dir=Dir,history_dir=HDir}) ->
+    case lists:keysort(2,get_loglist_chl(CHL)) of
+	[] ->                               % Empty history or no history.
+	    {reply,{error,no_history},LD};
+	Log ->
+	    case h_save_history(HDir,Dir,FileName,Log) of
+		{ok,AbsFileName} ->
+		    {reply,{ok,AbsFileName},LD};
+		{error,Reason} ->
+		    {reply,{error,Reason},LD}
+	    end
+    end;
+
+handle_call({get_autostart_data,{Nodes,Dependency}},_From,LD=#ld{chl=CHL}) ->
+    {ok,ASD} = build_autostart_data(lists:keysort(2,get_loglist_chl(CHL)),LD#ld.tc_dict),
+    TDGargs=get_latest_tdgargs_tracer_data(LD#ld.tracer_data),
+    {M,F,_}=LD#ld.tdg,
+    OptsG=LD#ld.optg,                       % Addnodes options generator.
+    {reply,
+     h_get_autostart_data(Nodes,LD#ld.c_node,Dependency,ASD,M,F,TDGargs,OptsG),
+     LD};
+
+handle_call({get_autostart_data,Dependency},From,LD=#ld{c_node=undefined}) ->
+    handle_call({get_autostart_data,{local_runtime,Dependency}},From,LD);
+handle_call({get_autostart_data,Dependency},From,LD=#ld{nodes=NodesD}) ->
+    Nodes=get_all_nodenames_nodes(NodesD),
+    handle_call({get_autostart_data,{local_runtime,{Nodes,Dependency}}},From,LD);
+
+handle_call(get_activities,_From,LD=#ld{chl=CHL,reactivators=Reactivators}) ->
+    TraceCases=get_ongoing_chl(CHL),
+    RNodes=get_all_nodes_reactivators(Reactivators),
+    ReturnList1=
+	if
+	    TraceCases==[] ->
+		[];
+	    true ->
+		[{tracecases,TraceCases}]
+	end,
+    ReturnList2=
+	if
+	    RNodes==[] ->
+		ReturnList1;
+	    true ->
+		[{reactivating_nodes,RNodes}|ReturnList1]
+	end,
+    {reply,{ok,ReturnList2},LD};
+
+handle_call({get_node_status,Node},_Node,LD) ->
+    case get_state_nodes(Node,LD#ld.nodes) of
+	false ->
+	    {reply,{error,unknown_node},LD};
+	StateStatus ->
+	    {reply,{ok,StateStatus},LD}
+    end;
+
+handle_call(get_session_data,_From,LD=#ld{session_state=SState,tracer_data=TD}) ->
+    case get_latest_session_nr_tracer_data(TD) of
+	undefined ->
+	    {reply,{error,no_session},LD};
+	SessionNr ->
+	    TDGargs=get_latest_tdgargs_tracer_data(TD),
+	    case is_tracing(SState) of
+		true ->
+		    {reply,{ok,{tracing,SessionNr,TDGargs}},LD};
+		false ->
+		    {reply,{ok,{not_tracing,SessionNr,TDGargs}},LD}
+	    end
+    end;
+
+handle_call(flush,_From,LD=#ld{c_node=CNode,nodes=NodesD}) ->
+    Nodes=get_tracing_nodes(NodesD),
+    {reply,h_flush(CNode,Nodes),LD};
+handle_call({flush,Nodes},_From,LD=#ld{c_node=CNode}) ->
+    {reply,h_flush(CNode,Nodes),LD};
+
+handle_call(get_loopdata,_From,LD) ->
+    {reply,LD,LD};
+
+%% Internal handle_call callbacks.
+
+handle_call({reactivator_reply,{Counter,RPid}},_From,LD=#ld{chl=CHL}) ->
+    HighestUsedCounter=get_highest_used_counter_chl(CHL),
+    if
+	HighestUsedCounter>Counter ->       % There are now more log entries.
+	    NewUnsortedLog=get_loglist_chl(CHL),
+	    {reply,{more,NewUnsortedLog},LD};
+	true ->                             % No Counter is youngest log entry.
+	    NodesD=LD#ld.nodes,
+	    Node=get_node_reactivators(RPid,LD#ld.reactivators),
+	    {reply,
+	     done,
+	     LD#ld{nodes=set_running_nodes(Node,NodesD),
+		   reactivators=del_reactivators(RPid,LD#ld.reactivators)}}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% Handling a notification from a trace case execution process. Receiving this
+%% indicated that this phase of the trace case is finnished.
+handle_cast({tc_executer_reply,{Phase,ProcH,Result}},LD) ->
+    case Phase of
+	activating ->                       % The trace case is running now.
+	    {ok,NewLD}=h_tc_activation_done(ProcH,Result,LD),
+	    {noreply,NewLD};
+	stopping ->
+	    {ok,NewLD}=h_tc_stopping_done(ProcH,Result,LD),
+	    {noreply,NewLD};
+	_ ->
+	    {noreply,LD}
+    end;
+handle_cast(_,LD) ->
+    {noreply,LD}.
+%% -----------------------------------------------------------------------------
+
+%% This is the case when a runtime component goes down. We stop all running
+%% reactivators for this node. Note that there can also be tracecases ongoing
+%% where this node is part of the Nodes variable. But there is not much we can
+%% do about that. Other then informing the user that it is unwise to reconnect
+%% this node before those tracecases have stopped being ongoing.
+handle_info({inviso_event,_CNode,_Time,{disconnected,Node,_}},LD) ->
+    {noreply,LD#ld{nodes=set_down_nodes(Node,LD#ld.nodes),
+		   reactivators=stop_node_reactivators(Node,LD#ld.reactivators)}};
+
+%% This is the case when a runtime component gets suspended. Much of the same
+%% problem as described above applies.
+handle_info({inviso_event,_CNode,_Time,{state_change,Node,{_,{suspended,_}}}},LD) ->
+    {noreply,LD#ld{nodes=set_suspended_nodes(Node,LD#ld.nodes),
+		   reactivators=stop_node_reactivators(Node,LD#ld.reactivators)}};
+
+handle_info(_,LD) ->
+    {noreply,LD}.
+%% -----------------------------------------------------------------------------
+
+%% Called when the tool server stops. First clause, termination is initiated by
+%% our self and therefore controlled another way. In the second case we are
+%% stopping for some external reason, and we must then do more here in terminate/2.
+terminate(normal,#ld{c_node=CNode}) ->      % This is when we are stopping our self.
+    stop_inviso_at_c_node(CNode);
+terminate(_,#ld{c_node=CNode,nodes=NodesD,keep_nodes=KeepNodes}) ->
+    remove_all_trace_patterns(CNode,KeepNodes,get_all_nodenames_nodes(NodesD)),
+    stop_inviso_at_c_node(CNode).
+%% -----------------------------------------------------------------------------
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+%% =============================================================================
+%% Handler first level help functions.
+%% =============================================================================
+
+%% -----------------------------------------------------------------------------
+%% reconnect_nodes
+%% -----------------------------------------------------------------------------
+
+%% Help function reconnecting the nodes in Nodes. Listed nodes must be part of
+%% the set of nodes handled by the tool. It is not possible to reconnect a node
+%% that is not marked as down. This partly because we otherwise risk losing the
+%% trace_failure state (which can not be rediscovered).
+h_reconnect_nodes(local_runtime,LD=#ld{nodes=NodesD}) -> % Non-distributed.
+    case get_state_nodes(local_runtime,NodesD) of
+	down ->
+	    {ok,{local_runtime,[],start_runtime_components(local_runtime,LD)}};
+	_ ->                                   % Allready connected!
+	    {ok,{[],{error,already_connected},LD}}
+    end;
 h_reconnect_nodes(Nodes,LD=#ld{nodes=NodesD}) when is_list(Nodes) ->
-    {Nodes2,NodesErr}=
-	lists:foldl(fun(N,{Nodes2,NodesErr})->
-			    case get_state_nodes(N,NodesD) of
-				down ->        % Yes this node can be reconnected.
-				    {[N|Nodes2],NodesErr};
-				false ->       % Not part of the node-set!
-				    {Nodes2,[{N,{error,unknown_node}}|NodesErr]};
-				_ ->           % Allready connected!
-				    {Nodes2,[{N,{error,already_connected}}|NodesErr]}
-			    end
-		    end,
-		    {[],[]},
-		    Nodes),
-    LD2=start_runtime_components(Nodes2,LD),   % Inpect the #ld.nodes for result.
-    {ok,{Nodes2,NodesErr,LD2}};
-h_reconnect_nodes(Nodes,_LD) ->
-    {error,{badarg,Nodes}}.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% start_session
-%% -----------------------------------------------------------------------------
-
-%% Help function starting the tracing at all nodes. Note that the tracer data
-%% is calculated using a user defined function. This is how for instance the
-%% file names (of the log files) are determined.
-%% Before the nodes are initiated their (possibly remaining) trace patterns are
-%% cleared, both local and global.
-h_start_session(M,F,TDGargs,LD=#ld{c_node=CNode,nodes=NodesD,tracer_data=TDs}) ->
-    case get_inactive_running_nodes(NodesD) of
-	[] ->                               % There are no nodes to initiate!
-	    h_start_session_nonodes(TDGargs,LD,[]);
-	Nodes ->                            % List of nodes or 'local_runtime'.
-	    case h_start_session_ctp_all(CNode,Nodes) of
-		{ok,Errors,[]} ->           % Now no nodes to initiate!
-		    h_start_session_nonodes(TDGargs,LD,Errors);
-		{ok,Errors,Nodes2} ->       % Now these nodes are fresh.
-		    case call_tracer_data_generator(CNode,M,F,TDGargs,Nodes2) of
-			{ok,TracerList} ->  % Generated our tracerdata.
-			    case h_start_session_2(CNode,TracerList,Errors) of
-				{ok,ReturnValue} -> % Some nodes are initialized now.
-				    {NewNodesD,Nodes3}=
-					set_tracing_running_nodes(CNode,ReturnValue,NodesD),
-				    {SessionNr,NewTDs}=insert_td_tracer_data(TDGargs,TDs),
-				    {ok,{SessionNr,
-					 ReturnValue,
-					 Nodes3, % The nodes that shall get initial tracases.
-					 LD#ld{nodes=NewNodesD,tracer_data=NewTDs}}};
-				{error,Reason} ->
-				    {error,Reason}
-			    end;
-			{error,Reason} ->   % Faulty tracer data generator func.
-			    {error,{bad_tdg,Reason}}
-		    end;
-		{error,Reason} ->           % Error clearing patterns.
-		    {error,Reason}
-	    end
-    end.
-
-h_start_session_nonodes(TDGargs,LD=#ld{c_node=CNode,tracer_data=TDs},Errors) ->
-    {SessionNr,NewTDs}=insert_td_tracer_data(TDGargs,TDs),
-    if
-	CNode==undefined ->
-	    {ok,{SessionNr,[],LD#ld{tracer_data=NewTDs}}};
-	true ->
-	    {ok,{SessionNr,{ok,Errors},LD#ld{tracer_data=NewTDs}}}
-    end.
-
-%% Help function clearing all trace patterns on all nodes.
-h_start_session_ctp_all(CNode,Nodes) ->
-    case remove_all_trace_patterns(CNode,[],Nodes) of
-	ok ->                               % Non-distributed case1.
-	    {ok,[],local_runtime};
-	{error,Reason} ->                   % Non-distributed case2 and general failure.
-	    {error,Reason};
-	{ok,NodeResults} ->
-	    h_start_session_ctp_all_2(NodeResults,[],[])
-    end.
-
-h_start_session_ctp_all_2([{Node,{error,Reason}}|Rest],Errors,Nodes) ->
-    h_start_session_ctp_all_2(Rest,[{Node,{error,Reason}}|Errors],Nodes);
-h_start_session_ctp_all_2([{Node,_OkOrPatternsUntouched}|Rest],Errors,Nodes) ->
-    h_start_session_ctp_all_2(Rest,Errors,[Node|Nodes]);
-h_start_session_ctp_all_2([],Errors,Nodes) ->
-    {ok,Errors,Nodes}.
-
-%% Help function doing the actual init_tracing.
-h_start_session_2(undefined,TracerData,_Errors) -> % Non distributed case.
-    case inviso:init_tracing(TracerData) of
+    {Nodes2,NodesErr}=
+	lists:foldl(fun(N,{Nodes2,NodesErr})->
+			    case get_state_nodes(N,NodesD) of
+				down ->        % Yes this node can be reconnected.
+				    {[N|Nodes2],NodesErr};
+				false ->       % Not part of the node-set!
+				    {Nodes2,[{N,{error,unknown_node}}|NodesErr]};
+				_ ->           % Allready connected!
+				    {Nodes2,[{N,{error,already_connected}}|NodesErr]}
+			    end
+		    end,
+		    {[],[]},
+		    Nodes),
+    LD2=start_runtime_components(Nodes2,LD),   % Inpect the #ld.nodes for result.
+    {ok,{Nodes2,NodesErr,LD2}};
+h_reconnect_nodes(Nodes,_LD) ->
+    {error,{badarg,Nodes}}.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% start_session
+%% -----------------------------------------------------------------------------
+
+%% Help function starting the tracing at all nodes. Note that the tracer data
+%% is calculated using a user defined function. This is how for instance the
+%% file names (of the log files) are determined.
+%% Before the nodes are initiated their (possibly remaining) trace patterns are
+%% cleared, both local and global.
+h_start_session(M,F,TDGargs,LD=#ld{c_node=CNode,nodes=NodesD,tracer_data=TDs}) ->
+    case get_inactive_running_nodes(NodesD) of
+	[] ->                               % There are no nodes to initiate!
+	    h_start_session_nonodes(TDGargs,LD,[]);
+	Nodes ->                            % List of nodes or 'local_runtime'.
+	    case h_start_session_ctp_all(CNode,Nodes) of
+		{ok,Errors,[]} ->           % Now no nodes to initiate!
+		    h_start_session_nonodes(TDGargs,LD,Errors);
+		{ok,Errors,Nodes2} ->       % Now these nodes are fresh.
+		    case call_tracer_data_generator(CNode,M,F,TDGargs,Nodes2) of
+			{ok,TracerList} ->  % Generated our tracerdata.
+			    case h_start_session_2(CNode,TracerList,Errors) of
+				{ok,ReturnValue} -> % Some nodes are initialized now.
+				    {NewNodesD,Nodes3}=
+					set_tracing_running_nodes(CNode,ReturnValue,NodesD),
+				    {SessionNr,NewTDs}=insert_td_tracer_data(TDGargs,TDs),
+				    {ok,{SessionNr,
+					 ReturnValue,
+					 Nodes3, % The nodes that shall get initial tracases.
+					 LD#ld{nodes=NewNodesD,tracer_data=NewTDs}}};
+				{error,Reason} ->
+				    {error,Reason}
+			    end;
+			{error,Reason} ->   % Faulty tracer data generator func.
+			    {error,{bad_tdg,Reason}}
+		    end;
+		{error,Reason} ->           % Error clearing patterns.
+		    {error,Reason}
+	    end
+    end.
+
+h_start_session_nonodes(TDGargs,LD=#ld{c_node=CNode,tracer_data=TDs},Errors) ->
+    {SessionNr,NewTDs}=insert_td_tracer_data(TDGargs,TDs),
+    if
+	CNode==undefined ->
+	    {ok,{SessionNr,[],LD#ld{tracer_data=NewTDs}}};
+	true ->
+	    {ok,{SessionNr,{ok,Errors},LD#ld{tracer_data=NewTDs}}}
+    end.
+
+%% Help function clearing all trace patterns on all nodes.
+h_start_session_ctp_all(CNode,Nodes) ->
+    case remove_all_trace_patterns(CNode,[],Nodes) of
+	ok ->                               % Non-distributed case1.
+	    {ok,[],local_runtime};
+	{error,Reason} ->                   % Non-distributed case2 and general failure.
+	    {error,Reason};
+	{ok,NodeResults} ->
+	    h_start_session_ctp_all_2(NodeResults,[],[])
+    end.
+
+h_start_session_ctp_all_2([{Node,{error,Reason}}|Rest],Errors,Nodes) ->
+    h_start_session_ctp_all_2(Rest,[{Node,{error,Reason}}|Errors],Nodes);
+h_start_session_ctp_all_2([{Node,_OkOrPatternsUntouched}|Rest],Errors,Nodes) ->
+    h_start_session_ctp_all_2(Rest,Errors,[Node|Nodes]);
+h_start_session_ctp_all_2([],Errors,Nodes) ->
+    {ok,Errors,Nodes}.
+
+%% Help function doing the actual init_tracing.
+h_start_session_2(undefined,TracerData,_Errors) -> % Non distributed case.
+    case inviso:init_tracing(TracerData) of
 	{ok,LogResult} when is_list(LogResult) ->
-	    {ok,{ok,LogResult}};
-	{error,already_initated} ->         % Perhaps adopted!?
-	    {ok,{error,already_initiated}}; % Not necessarily wrong.
-	{error,Reason} ->
-	    {error,Reason}
-    end;
-h_start_session_2(CNode,TracerList,Errors) ->
-    case rpc:call(CNode,inviso,init_tracing,[TracerList]) of
-	{ok,NodeResults} ->
-	    {ok,{ok,Errors++NodeResults}};
-	{error,Reason} ->
-	    {error,Reason};
-	{badrpc,Reason} ->
-	    {error,{inviso_control_node_error,Reason}}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Help function starting all initial trace cases. They are actually handled
-%% the same way as user started trace cases. We actually only start initial
-%% tracecases at Nodes (if Nodes is a list of nodes). This because we may have
-%% adopted some nodes some already tracing nodes, and such are supposed to have
-%% the correct patterns and flags set.
-do_initial_tcs([{TC,Vars}|Rest],Nodes,LD) ->
-    Id=make_ref(),                          % Trace case ID.
-    case h_atc(TC,Id,Vars,LD,Nodes) of      % Start using regular start methods.
-	{ok,NewLD} ->                       % Trace case was successfully started.
-	    NewInitialTcs=add_initial_tcs(TC,Id,NewLD#ld.started_initial_tcs),
-	    do_initial_tcs(Rest,Nodes,NewLD#ld{started_initial_tcs=NewInitialTcs});
-	{error,_Reason} ->
-	    do_initial_tcs(Rest,Nodes,LD)
-    end;
-do_initial_tcs([_|Rest],Nodes,LD) ->
-    do_initial_tcs(Rest,Nodes,LD);
-do_initial_tcs([],_Nodes,LD) ->
-    LD.
-%% -----------------------------------------------------------------------------
-
-%% This help functio is used instead of do_initial_tcs/3 if there actually are no
-%% nodes to do the trace cases on. The reason we must have this function is that
-%% the tracecases must still be entered into the history with bindings and all.
-%% But we let them be marked as 'running' immediately (no need for the activator
-%% process).
-add_initial_tcs_to_history([{TC,Vars}|Rest],LD=#ld{tc_dict=TCdict,chl=CHL}) ->
-    case get_tracecase_tc_dict(TC,TCdict) of
-	{ok,TraceCase} ->
-	    case check_bindings(Vars,TraceCase) of
-		{ok,Bindings} ->
-		    Id=make_ref(),          % Trace case ID.
-		    FakeProcH=make_ref(),   % Need something to enter as activator.
-		    NewCHL=set_activating_chl(TC,Id,CHL,Bindings,FakeProcH),
-		    NewCHL2=set_running_chl(FakeProcH,TC,Id,void,NewCHL), % Result=void.
-		    NewInitialTcs=add_initial_tcs(TC,Id,LD#ld.started_initial_tcs),
-		    add_initial_tcs_to_history(Rest,LD#ld{chl=NewCHL2,
-							  started_initial_tcs=NewInitialTcs});
-		{error,_Reason} ->          % Not much we can do about that.
-		    add_initial_tcs_to_history(Rest,LD)
-	    end;
-	false ->
-	    add_initial_tcs_to_history(Rest,LD)
-    end;
-add_initial_tcs_to_history([],LD) ->
-    LD.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% reinitiate_session
-%% -----------------------------------------------------------------------------
-
-%% Function doing the reinitiation. That means first do init_tracing at the nodes
-%% in question. Then redo the command history to bring them up to speed.
-%% But first the runtime component is cleared of all trace patterns.
-h_reinitiate_session(Nodes,M,F,TDGargs,LD=#ld{c_node=CNode,nodes=NodesD}) ->
-    case h_reinitiate_session_2(Nodes,NodesD,CNode) of
-	{ok,{[],NodesErr}} ->               % No nodes to reinitiate.
-	    {ok,{NodesErr,{ok,[]},LD}};
-	{ok,{Nodes2,NodesErr}} ->           % List of nodes or local_runtime.
-	    case call_tracer_data_generator(CNode,M,F,TDGargs,Nodes2) of
-		{ok,TracerList} ->
-		    case h_start_session_2(CNode,TracerList,[]) of % Borrow from start_session.
-			{ok,ReturnValue} -> % Ok, now we must redo cmd history.
-			    {NewNodesD,_Nodes}=
-				set_tracing_running_nodes(CNode,ReturnValue,NodesD),
-			    NewLD=h_reinitiate_session_chl(Nodes2,LD#ld{nodes=NewNodesD}),
-			    {ok,{NodesErr,ReturnValue,NewLD}};
-			{error,Reason} ->
-			    {error,Reason}
-		    end;
-		{error,Reason} ->
-		    {error,{bad_tdg,Reason}}
-	    end;
-	{error,Reason} ->
-	    {error,Reason}
-    end.
-
-%% Help function finding out which nodes in Nodes actually can be reinitiated.
-%% A node must be up, inactive and not suspended in order for this to work. All the
-%% rest is just a matter of how detailed error return values we want to generate.
-h_reinitiate_session_2(local_runtime,NodesD,undefined) -> % Non distributed case.
-    case get_state_nodes(local_runtime,NodesD) of
-	{inactive,running} ->               % Only ok case.
-	    case inviso:ctp_all() of
-		ok ->
-		    {ok,{local_runtime,[]}};
-		{error,Reason} ->           % This is strange.
-		    {error,Reason}
-	    end;
-	{_,suspended} ->
-	    {ok,{[],{error,suspended}}};
-	down ->
-	    {ok,{[],{error,down}}};
-	_ ->
-	    {ok,{[],{error,already_in_session}}}
-    end;
+	    {ok,{ok,LogResult}};
+	{error,already_initated} ->         % Perhaps adopted!?
+	    {ok,{error,already_initiated}}; % Not necessarily wrong.
+	{error,Reason} ->
+	    {error,Reason}
+    end;
+h_start_session_2(CNode,TracerList,Errors) ->
+    case rpc:call(CNode,inviso,init_tracing,[TracerList]) of
+	{ok,NodeResults} ->
+	    {ok,{ok,Errors++NodeResults}};
+	{error,Reason} ->
+	    {error,Reason};
+	{badrpc,Reason} ->
+	    {error,{inviso_control_node_error,Reason}}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% Help function starting all initial trace cases. They are actually handled
+%% the same way as user started trace cases. We actually only start initial
+%% tracecases at Nodes (if Nodes is a list of nodes). This because we may have
+%% adopted some nodes some already tracing nodes, and such are supposed to have
+%% the correct patterns and flags set.
+do_initial_tcs([{TC,Vars}|Rest],Nodes,LD) ->
+    Id=make_ref(),                          % Trace case ID.
+    case h_atc(TC,Id,Vars,LD,Nodes) of      % Start using regular start methods.
+	{ok,NewLD} ->                       % Trace case was successfully started.
+	    NewInitialTcs=add_initial_tcs(TC,Id,NewLD#ld.started_initial_tcs),
+	    do_initial_tcs(Rest,Nodes,NewLD#ld{started_initial_tcs=NewInitialTcs});
+	{error,_Reason} ->
+	    do_initial_tcs(Rest,Nodes,LD)
+    end;
+do_initial_tcs([_|Rest],Nodes,LD) ->
+    do_initial_tcs(Rest,Nodes,LD);
+do_initial_tcs([],_Nodes,LD) ->
+    LD.
+%% -----------------------------------------------------------------------------
+
+%% This help functio is used instead of do_initial_tcs/3 if there actually are no
+%% nodes to do the trace cases on. The reason we must have this function is that
+%% the tracecases must still be entered into the history with bindings and all.
+%% But we let them be marked as 'running' immediately (no need for the activator
+%% process).
+add_initial_tcs_to_history([{TC,Vars}|Rest],LD=#ld{tc_dict=TCdict,chl=CHL}) ->
+    case get_tracecase_tc_dict(TC,TCdict) of
+	{ok,TraceCase} ->
+	    case check_bindings(Vars,TraceCase) of
+		{ok,Bindings} ->
+		    Id=make_ref(),          % Trace case ID.
+		    FakeProcH=make_ref(),   % Need something to enter as activator.
+		    NewCHL=set_activating_chl(TC,Id,CHL,Bindings,FakeProcH),
+		    NewCHL2=set_running_chl(FakeProcH,TC,Id,void,NewCHL), % Result=void.
+		    NewInitialTcs=add_initial_tcs(TC,Id,LD#ld.started_initial_tcs),
+		    add_initial_tcs_to_history(Rest,LD#ld{chl=NewCHL2,
+							  started_initial_tcs=NewInitialTcs});
+		{error,_Reason} ->          % Not much we can do about that.
+		    add_initial_tcs_to_history(Rest,LD)
+	    end;
+	false ->
+	    add_initial_tcs_to_history(Rest,LD)
+    end;
+add_initial_tcs_to_history([],LD) ->
+    LD.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% reinitiate_session
+%% -----------------------------------------------------------------------------
+
+%% Function doing the reinitiation. That means first do init_tracing at the nodes
+%% in question. Then redo the command history to bring them up to speed.
+%% But first the runtime component is cleared of all trace patterns.
+h_reinitiate_session(Nodes,M,F,TDGargs,LD=#ld{c_node=CNode,nodes=NodesD}) ->
+    case h_reinitiate_session_2(Nodes,NodesD,CNode) of
+	{ok,{[],NodesErr}} ->               % No nodes to reinitiate.
+	    {ok,{NodesErr,{ok,[]},LD}};
+	{ok,{Nodes2,NodesErr}} ->           % List of nodes or local_runtime.
+	    case call_tracer_data_generator(CNode,M,F,TDGargs,Nodes2) of
+		{ok,TracerList} ->
+		    case h_start_session_2(CNode,TracerList,[]) of % Borrow from start_session.
+			{ok,ReturnValue} -> % Ok, now we must redo cmd history.
+			    {NewNodesD,_Nodes}=
+				set_tracing_running_nodes(CNode,ReturnValue,NodesD),
+			    NewLD=h_reinitiate_session_chl(Nodes2,LD#ld{nodes=NewNodesD}),
+			    {ok,{NodesErr,ReturnValue,NewLD}};
+			{error,Reason} ->
+			    {error,Reason}
+		    end;
+		{error,Reason} ->
+		    {error,{bad_tdg,Reason}}
+	    end;
+	{error,Reason} ->
+	    {error,Reason}
+    end.
+
+%% Help function finding out which nodes in Nodes actually can be reinitiated.
+%% A node must be up, inactive and not suspended in order for this to work. All the
+%% rest is just a matter of how detailed error return values we want to generate.
+h_reinitiate_session_2(local_runtime,NodesD,undefined) -> % Non distributed case.
+    case get_state_nodes(local_runtime,NodesD) of
+	{inactive,running} ->               % Only ok case.
+	    case inviso:ctp_all() of
+		ok ->
+		    {ok,{local_runtime,[]}};
+		{error,Reason} ->           % This is strange.
+		    {error,Reason}
+	    end;
+	{_,suspended} ->
+	    {ok,{[],{error,suspended}}};
+	down ->
+	    {ok,{[],{error,down}}};
+	_ ->
+	    {ok,{[],{error,already_in_session}}}
+    end;
 h_reinitiate_session_2(Nodes,NodesD,CNode) when is_list(Nodes) ->
-    {ok,lists:foldl(fun(N,{Nodes2,NodesErr})->
-			    case get_state_nodes(N,NodesD) of
-				{inactive,running} -> % Only ok case.
-				    case rpc:call(CNode,inviso,ctp_all,[[N]]) of
-					{ok,[{N,ok}]} ->
-					    {[N|Nodes2],NodesErr};
-					{ok,[{N,{error,Reason}}]} ->
-					    {Nodes2,[{N,{error,Reason}}|NodesErr]};
-					{error,Reason} ->
-					    {Nodes2,[{N,{error,Reason}}|NodesErr]};
-					{badrpc,Reason} ->
-					    {Nodes2,[{N,{error,{badrpc,Reason}}}|NodesErr]}
-				    end;
-				{_,suspended} ->
-				    {Nodes2,[{N,{error,suspended}}|NodesErr]};
-				down ->
-				    {Nodes2,[{N,{error,down}}|NodesErr]};
-				false ->
-				    {Nodes2,[{N,{error,unknown_node}}|NodesErr]};
-				_ ->
-				    {Nodes2,[{N,{error,already_in_session}}|NodesErr]}
-			    end
-		    end,
-		    {[],[]},
-		    Nodes)};
-h_reinitiate_session_2(Nodes,_NodesD,_CNode) ->
-    {error,{badarg7,Nodes}}.
-
-%% Help function redoing the command history log at all nodes that actually
-%% started to trace. Note that we do not modify the return value which will be
-%% given to the caller just because we decide not to redo commands. The user
-%% must conclude him self from the inviso return value that commands were not
-%% redone at a particular node.
-h_reinitiate_session_chl(local_runtime,LD) ->
-    h_reinitiate_session_chl([local_runtime],LD);
-h_reinitiate_session_chl([Node|Rest],LD=#ld{nodes=NodesD}) ->
-    case get_state_nodes(Node,NodesD) of
-	{tracing,running} ->                % Only case when we shall redo!
-	    h_reinitiate_session_chl(Rest,redo_cmd_history(Node,LD));
-	_ ->                                % No redo of chl in other cases.
-	    h_reinitiate_session_chl(Rest,LD)
-    end;
-h_reinitiate_session_chl([],LD) ->
-    LD.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% restore_session
-%% -----------------------------------------------------------------------------
-
-%% Help function starting a session (init tracing) and redoes the history
-%% found in CHL.
-h_restore_session(MoreTDGargs,LD) ->
-    DateTime=calendar:universal_time(),
-    {M,F,Args}=LD#ld.tdg,
-    TDGargs=inviso_tool_lib:mk_tdg_args(DateTime,MoreTDGargs++Args),
-    case h_start_session(M,F,TDGargs,LD) of
-	{ok,{SessionNr,ReturnVal,NewLD}} ->   % There were no available nodes.
-	    {ok,{SessionNr,ReturnVal,NewLD}};
-	{ok,{SessionNr,ReturnVal,Nodes2,NewLD}} ->
-	    NewLD2=h_reinitiate_session_chl(Nodes2,NewLD),
-	    {ok,{SessionNr,ReturnVal,NewLD2}};
-	{error,Reason} ->                     % Risk of out of control.
-	    {error,Reason}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% stop_session
-%% -----------------------------------------------------------------------------
-
-%% Help function stopping tracing at tracing nodes.
-h_stop_session(#ld{c_node=CNode,nodes=NodesD,tracer_data=TDs}) ->
-    case h_stop_session_2(CNode,NodesD) of
-	{ok,Result} ->
-	    {ok,{get_latest_session_nr_tracer_data(TDs),Result}};
-	{error,Reason} ->
-	    {error,Reason}
-    end.
-
-h_stop_session_2(undefined,NodesD) ->  % The non distributed case.
-    case get_tracing_nodes(NodesD) of
-	{up,{inactive,_}} ->           % Already not tracing!
-	    {ok,[]};
-	{up,_} ->
-	    case inviso:stop_tracing() of
-		{ok,_State} ->
-		    {ok,[ok]};
-		{error,no_response} ->
-		    {ok,[]};
-		{error,Reason} ->
-		    {error,Reason}
-	    end;
-	down ->
-	    {ok,[]}
-    end;
-h_stop_session_2(CNode,NodesD) ->
-    Nodes=get_tracing_nodes(NodesD),
-    case rpc:call(CNode,inviso,stop_tracing,[Nodes]) of
-	{ok,NodeResults} ->
-	    {ok,lists:map(fun({N,{ok,_}})->{N,ok};
-			     (NodeError)->NodeError
-			  end,
-			  NodeResults)};
-	{error,Reason} ->
-	    {error,Reason};
-	{badrpc,Reason} ->
-	    {error,{inviso_control_node_error,Reason}}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Help function removing any trace flags, trace patterns and meta trace patterns
-%% at Nodes. This will cause the nodes to become "fresh".
-h_reset_nodes(local_runtime,_CNode) ->
-    inviso:clear([keep_log_files]);
-h_reset_nodes(Nodes,CNode) ->
-    case inviso_tool_lib:inviso_cmd(CNode,clear,[Nodes,[keep_log_files]]) of
-	{ok,NodeResults} ->
-	    {ok,NodeResults};
-	{error,Reason} ->
-	    {error,Reason}
-    end.
-%% -----------------------------------------------------------------------------
-
-
-%% -----------------------------------------------------------------------------
-%% atc
-%% -----------------------------------------------------------------------------
-
-%% Function handling ativating a trace case. Trace cases that do not have a
-%% particular on/off handling (but just on in some scense) are handled here too.
-%% The trace case is entered into the Command History Log.
-%% Note that the trace case can not be executed at this node but must be
-%% executed where the inviso control component is.
-%% Further it is possible to either activated the tracecase for all running and
-%% tracing nodes, or just for a specified list of nodes.
-%%  TC=tracecase_name(),
-%%  Id=term(), identifiying this usage so we can turn it off later.
-%%  Vars=list(), list of variable-value bindnings.
-h_atc(TC,Id,Vars,LD) ->
-    h_atc(TC,Id,Vars,LD,void).              % For all running-tracing nodes.
-
-h_atc(TC,Id,Vars,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL},Nodes) ->
-    case find_id_chl(TC,Id,CHL) of
-	activating ->                       % Already started.
-	    {error,activating};
-	stopping ->                         % Not yet stopped.
-	    {error,deactivating};
-	false ->
-	    case get_tracecase_tc_dict(TC,TCdict) of
-		{ok,TraceCase} ->           % Such a trace case exists.
-		    case check_bindings(Vars,TraceCase) of
-			{ok,Bindings} ->    % Necessary vars exists in Vars.
-			    if
+    {ok,lists:foldl(fun(N,{Nodes2,NodesErr})->
+			    case get_state_nodes(N,NodesD) of
+				{inactive,running} -> % Only ok case.
+				    case rpc:call(CNode,inviso,ctp_all,[[N]]) of
+					{ok,[{N,ok}]} ->
+					    {[N|Nodes2],NodesErr};
+					{ok,[{N,{error,Reason}}]} ->
+					    {Nodes2,[{N,{error,Reason}}|NodesErr]};
+					{error,Reason} ->
+					    {Nodes2,[{N,{error,Reason}}|NodesErr]};
+					{badrpc,Reason} ->
+					    {Nodes2,[{N,{error,{badrpc,Reason}}}|NodesErr]}
+				    end;
+				{_,suspended} ->
+				    {Nodes2,[{N,{error,suspended}}|NodesErr]};
+				down ->
+				    {Nodes2,[{N,{error,down}}|NodesErr]};
+				false ->
+				    {Nodes2,[{N,{error,unknown_node}}|NodesErr]};
+				_ ->
+				    {Nodes2,[{N,{error,already_in_session}}|NodesErr]}
+			    end
+		    end,
+		    {[],[]},
+		    Nodes)};
+h_reinitiate_session_2(Nodes,_NodesD,_CNode) ->
+    {error,{badarg7,Nodes}}.
+
+%% Help function redoing the command history log at all nodes that actually
+%% started to trace. Note that we do not modify the return value which will be
+%% given to the caller just because we decide not to redo commands. The user
+%% must conclude him self from the inviso return value that commands were not
+%% redone at a particular node.
+h_reinitiate_session_chl(local_runtime,LD) ->
+    h_reinitiate_session_chl([local_runtime],LD);
+h_reinitiate_session_chl([Node|Rest],LD=#ld{nodes=NodesD}) ->
+    case get_state_nodes(Node,NodesD) of
+	{tracing,running} ->                % Only case when we shall redo!
+	    h_reinitiate_session_chl(Rest,redo_cmd_history(Node,LD));
+	_ ->                                % No redo of chl in other cases.
+	    h_reinitiate_session_chl(Rest,LD)
+    end;
+h_reinitiate_session_chl([],LD) ->
+    LD.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% restore_session
+%% -----------------------------------------------------------------------------
+
+%% Help function starting a session (init tracing) and redoes the history
+%% found in CHL.
+h_restore_session(MoreTDGargs,LD) ->
+    DateTime=calendar:universal_time(),
+    {M,F,Args}=LD#ld.tdg,
+    TDGargs=inviso_tool_lib:mk_tdg_args(DateTime,MoreTDGargs++Args),
+    case h_start_session(M,F,TDGargs,LD) of
+	{ok,{SessionNr,ReturnVal,NewLD}} ->   % There were no available nodes.
+	    {ok,{SessionNr,ReturnVal,NewLD}};
+	{ok,{SessionNr,ReturnVal,Nodes2,NewLD}} ->
+	    NewLD2=h_reinitiate_session_chl(Nodes2,NewLD),
+	    {ok,{SessionNr,ReturnVal,NewLD2}};
+	{error,Reason} ->                     % Risk of out of control.
+	    {error,Reason}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% stop_session
+%% -----------------------------------------------------------------------------
+
+%% Help function stopping tracing at tracing nodes.
+h_stop_session(#ld{c_node=CNode,nodes=NodesD,tracer_data=TDs}) ->
+    case h_stop_session_2(CNode,NodesD) of
+	{ok,Result} ->
+	    {ok,{get_latest_session_nr_tracer_data(TDs),Result}};
+	{error,Reason} ->
+	    {error,Reason}
+    end.
+
+h_stop_session_2(undefined,NodesD) ->  % The non distributed case.
+    case get_tracing_nodes(NodesD) of
+	{up,{inactive,_}} ->           % Already not tracing!
+	    {ok,[]};
+	{up,_} ->
+	    case inviso:stop_tracing() of
+		{ok,_State} ->
+		    {ok,[ok]};
+		{error,no_response} ->
+		    {ok,[]};
+		{error,Reason} ->
+		    {error,Reason}
+	    end;
+	down ->
+	    {ok,[]}
+    end;
+h_stop_session_2(CNode,NodesD) ->
+    Nodes=get_tracing_nodes(NodesD),
+    case rpc:call(CNode,inviso,stop_tracing,[Nodes]) of
+	{ok,NodeResults} ->
+	    {ok,lists:map(fun({N,{ok,_}})->{N,ok};
+			     (NodeError)->NodeError
+			  end,
+			  NodeResults)};
+	{error,Reason} ->
+	    {error,Reason};
+	{badrpc,Reason} ->
+	    {error,{inviso_control_node_error,Reason}}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% Help function removing any trace flags, trace patterns and meta trace patterns
+%% at Nodes. This will cause the nodes to become "fresh".
+h_reset_nodes(local_runtime,_CNode) ->
+    inviso:clear([keep_log_files]);
+h_reset_nodes(Nodes,CNode) ->
+    case inviso_tool_lib:inviso_cmd(CNode,clear,[Nodes,[keep_log_files]]) of
+	{ok,NodeResults} ->
+	    {ok,NodeResults};
+	{error,Reason} ->
+	    {error,Reason}
+    end.
+%% -----------------------------------------------------------------------------
+
+
+%% -----------------------------------------------------------------------------
+%% atc
+%% -----------------------------------------------------------------------------
+
+%% Function handling ativating a trace case. Trace cases that do not have a
+%% particular on/off handling (but just on in some scense) are handled here too.
+%% The trace case is entered into the Command History Log.
+%% Note that the trace case can not be executed at this node but must be
+%% executed where the inviso control component is.
+%% Further it is possible to either activated the tracecase for all running and
+%% tracing nodes, or just for a specified list of nodes.
+%%  TC=tracecase_name(),
+%%  Id=term(), identifiying this usage so we can turn it off later.
+%%  Vars=list(), list of variable-value bindnings.
+h_atc(TC,Id,Vars,LD) ->
+    h_atc(TC,Id,Vars,LD,void).              % For all running-tracing nodes.
+
+h_atc(TC,Id,Vars,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL},Nodes) ->
+    case find_id_chl(TC,Id,CHL) of
+	activating ->                       % Already started.
+	    {error,activating};
+	stopping ->                         % Not yet stopped.
+	    {error,deactivating};
+	false ->
+	    case get_tracecase_tc_dict(TC,TCdict) of
+		{ok,TraceCase} ->           % Such a trace case exists.
+		    case check_bindings(Vars,TraceCase) of
+			{ok,Bindings} ->    % Necessary vars exists in Vars.
+			    if
 				is_list(Nodes) -> % Nodes predefined.
-				    h_atc_2(TC,Id,CNode,CHL,LD,TraceCase,Bindings,Nodes);
-				true ->     % Use all tracing and running nodes.
-				    Nodes1=get_nodenames_running_nodes(LD#ld.nodes),
-				    h_atc_2(TC,Id,CNode,CHL,LD,TraceCase,Bindings,Nodes1)
-			    end;
-			{error,Reason} ->   % Variable def missing.
-			    {error,Reason}
-		    end;
-		false ->
-		    {error,unknown_tracecase}
-	    end;
-	{ok,_Bindings} ->                   % Already activated and running.
-	    {error,already_started}
-    end.
-
-h_atc_2(TC,Id,CNode,CHL,LD,TraceCase,Bindings,Nodes) ->
-    case exec_trace_case_on(CNode,TraceCase,Bindings,Nodes) of
-	{ok,ProcH} ->                       % Trace cases have no return values.
-	    NewCHL=set_activating_chl(TC,Id,CHL,Bindings,ProcH),
-	    {ok,LD#ld{chl=NewCHL}};
-	{error,Reason} ->
-	    {error,Reason}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% sync_atc
-%% -----------------------------------------------------------------------------
-
-h_sync_atc(TC,Id,Vars,TimeOut,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL}) ->
-    case find_id_chl(TC,Id,CHL) of
-	activating ->                       % Already started.
-	    {error,activating};
-	stopping ->                         % Not yet stopped.
-	    {error,deactivating};
-	false ->
-	    case get_tracecase_tc_dict(TC,TCdict) of
-		{ok,TraceCase} ->           % Such a trace case exists.
-		    case check_bindings(Vars,TraceCase) of
-			{ok,Bindings} ->    % Necessary vars exists in Vars.
-			    {ok,TcFName}=get_tc_activate_fname(TraceCase),
-			    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
-			    Bindings2=erl_eval:add_binding('Nodes',Nodes,Bindings),
-			    RpcNode=get_rpc_nodename(CNode),
-			    case rpc:call(RpcNode,file,script,[TcFName,Bindings2],TimeOut) of
-				{ok,Value} ->
-				    FakeProcH=make_ref(),
-				    NewCHL1=set_activating_chl(TC,Id,CHL,Bindings,FakeProcH),
-				    NewCHL2=set_running_chl(FakeProcH,TC,Id,Value,NewCHL1),
-				    {ok,LD#ld{chl=NewCHL2},Value};
-				{error,Reason} ->
-				    {error,{faulty_tracecase,{TcFName,Reason}}};
-				{badrpc,Reason} ->
-				    {error,{badrpc,Reason}}
-			    end;
-			{error,Reason} ->   % Variable def missing.
-			    {error,Reason}
-		    end;
-		false ->
-		    {error,unknown_tracecase}
-	    end;
-	{ok,_Bindings} ->                   % Already activated and running.
-	    {error,already_started}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% rtc
-%% -----------------------------------------------------------------------------
-
-%% Function handling running a trace case without marking it as activated. It
-%% is in the history mearly indicated as activated
-h_sync_rtc(TC,Vars,TimeOut,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL}) ->
-    case get_tracecase_tc_dict(TC,TCdict) of
-	{ok,TraceCase} ->                   % Such a trace case exists.
-	    case check_bindings(Vars,TraceCase) of
-		{ok,Bindings} ->            % Necessary vars exists in Vars.
-		    {ok,TcFName}=get_tc_activate_fname(TraceCase),
-		    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
-		    Bindings2=erl_eval:add_binding('Nodes',Nodes,Bindings),
-		    RpcNode=get_rpc_nodename(CNode),
-		    case rpc:call(RpcNode,file,script,[TcFName,Bindings2],TimeOut) of
-			{ok,Value} ->
-			    {ok,LD#ld{chl=add_rtc_chl(TC,Bindings2,CHL)},Value};
-			{error,Reason} ->
-			    {error,{faulty_tracecase,{TcFName,Reason}}};
-			{badrpc,Reason} ->
-			    {error,{badrpc,Reason}}
-		    end;
-		{error,Reason} ->   % Variable def missing.
-		    {error,Reason}
-	    end;
-	false ->
-	    {error,unknown_tracecase}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% dtc
-%% -----------------------------------------------------------------------------
-
-%% Function handling turning a trace case off. The trace case must be registered
-%% as having an off mechanism. If it has an off mechanism and was previously entered
-%% into the Command History Log and is done with its activation phase, it will be
-%% executed and removed from the CHL.
-h_dtc(TC,Id,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL}) ->
-    case find_id_chl(TC,Id,CHL) of
-	{ok,Bindings} ->                    % Yes, we have turned it on before.
-	    case get_tracecase_tc_dict(TC,TCdict) of
-		{ok,TraceCase} ->
-		    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
-		    case exec_trace_case_off(CNode,TraceCase,Bindings,Nodes) of
-			{ok,ProcH} ->
-			    NewCHL=set_stopping_chl(TC,Id,CHL,ProcH),
-			    {ok,LD#ld{chl=NewCHL}};
-			{error,Reason} ->
-			    {error,Reason}
-		    end;
-		false ->                    % Strange, Id ok but no such trace case.
-		    {error,unknown_tracecase}
-	    end;
-	false ->                            % Not previously turned on.
-	    {error,unknown_id};
-	activating ->
-	    {error,activating};
-	stopping ->
-	    {error,already_deactivating}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% sync_dtc
-%% -----------------------------------------------------------------------------
-
-h_sync_dtc(TC,Id,TimeOut,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL}) ->
-    case find_id_chl(TC,Id,CHL) of
-	{ok,Bindings} ->                    % Yes, we have turned it on before.
-	    case get_tracecase_tc_dict(TC,TCdict) of
-		{ok,TraceCase} ->
-		    case get_tc_deactivate_fname(TraceCase) of
-			{ok,TcFName} ->
-			    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
-			    Bindings2=erl_eval:add_binding('Nodes',Nodes,Bindings),
-			    RpcNode=get_rpc_nodename(CNode),
-			    case rpc:call(RpcNode,file,script,[TcFName,Bindings2],TimeOut) of
-				{ok,Value} ->
-				    FakeProcH=make_ref(),
-				    NewCHL1=set_stopping_chl(TC,Id,CHL,FakeProcH),
-				    NewCHL2=nullify_chl(FakeProcH,TC,Id,NewCHL1),
-				    {ok,LD#ld{chl=NewCHL2},Value};
-				{error,Reason} -> % Script fault.
-				    {error,{faulty_tracecase,{TcFName,Reason}}};
-				{badrpc,Reason} ->
-				    {error,{badrpc,Reason}}
-			    end;
-			false ->
-			    {error,no_deactivation}
-		    end;
-		false ->                    % Strange, Id ok but no such trace case.
-		    {error,unknown_tracecase}
-	    end;
-	false ->                            % Not previously turned on.
-	    {error,unknown_id};
-	activating ->
-	    {error,activating};
-	stopping ->
-	    {error,already_deactivating}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% inviso
-%% -----------------------------------------------------------------------------
-
-%% Function executing one inviso command. The returnvalue from the inviso
-%% function call will be the return value to the client. The command is
-%% entered into the history command log.
-%% Note that the inviso call may have to be done at another node, dictated
-%% by the c_node field. Further, if the module name is not an atom it is
-%% most likely a regexp, which must be expanded at the regexp_node. Note
-%% this is only relevant for tp and tpl.
-h_inviso(Cmd,Args,LD=#ld{c_node=CNode,regexp_node=RegExpNode,chl=CHL}) ->
-    Arity=length(Args),
-    case check_proper_inviso_call(Cmd,Arity) of
-	{true,RegExpFlag} ->                % Yes it is an inviso call.
-	    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
-	    case h_inviso_2(Cmd,Args,CNode,RegExpNode,RegExpFlag,Nodes) of
-		{ok,Result} ->
-		    case check_inviso_call_to_history(Cmd,Arity) of
-			true ->             % This function shall be added to chl.
-			    {ok,{Result,LD#ld{chl=add_inviso_call_chl(Cmd,Args,CHL)}}};
-			false ->            % Do not add it.
-			    {ok,{Result,LD}}
-		    end;
-		{error,Reason} ->
-		    {error,Reason}
-	    end;
-	false ->                            % Not an inviso function.
-	    {error,invalid_function_name}
-    end.
-
-h_inviso_2(Cmd,Args,undefined,_,_,_) ->     % A non distributed system.
-    case catch apply(inviso,Cmd,Args) of    % Regexp expansion only relevant when
-	{'EXIT',Reason} ->                  % distributed, here let inviso_rt expand.
-	    {error,{'EXIT',Reason}};
-	Result ->
-	    {ok,Result}
-    end;
-h_inviso_2(Cmd,Args,CNode,RegExpNode,RegExpFlag,Nodes) ->
-    case expand_module_regexps(Args,RegExpNode,Nodes,RegExpFlag) of
-	{ok,NewArgs} ->
-	    case catch inviso_tool_lib:inviso_cmd(CNode,Cmd,[Nodes|NewArgs]) of
-		{'EXIT',Reason} ->
-		    {error,{'EXIT',Reason}};
-		{error,{badrpc,Reason}} ->  % Includes runtime failure.
-		    {error,{badrpc,Reason}};
-		Result ->
-		    {ok,Result}
-	    end;
-	{error,Reason} ->
-	    {error,Reason}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% reactivate
-%% -----------------------------------------------------------------------------
-
-h_reactivate(_Node,undefined) ->            % The non-distributed case.
-    case inviso:cancel_suspension() of
-	ok ->
-	    ok;
-	{error,Reason} ->
-	    {error,Reason}
-    end;
-h_reactivate(Node,CNode) ->
-    case inviso_tool_lib:inviso_cmd(CNode,cancel_suspension,[[Node]]) of
-	{ok,[{Node,ok}]} ->
-	    ok;
-	{ok,[{Node,{error,Reason}}]} ->
-	    {error,Reason};
-	{error,Reason} ->
-	    {error,Reason}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% save_history
-%% -----------------------------------------------------------------------------
-
-h_save_history(HDir,Dir,FileName,SortedLog) ->
-    Dir0=
-	if
+				    h_atc_2(TC,Id,CNode,CHL,LD,TraceCase,Bindings,Nodes);
+				true ->     % Use all tracing and running nodes.
+				    Nodes1=get_nodenames_running_nodes(LD#ld.nodes),
+				    h_atc_2(TC,Id,CNode,CHL,LD,TraceCase,Bindings,Nodes1)
+			    end;
+			{error,Reason} ->   % Variable def missing.
+			    {error,Reason}
+		    end;
+		false ->
+		    {error,unknown_tracecase}
+	    end;
+	{ok,_Bindings} ->                   % Already activated and running.
+	    {error,already_started}
+    end.
+
+h_atc_2(TC,Id,CNode,CHL,LD,TraceCase,Bindings,Nodes) ->
+    {ok,ProcH} = exec_trace_case_on(CNode,TraceCase,Bindings,Nodes),
+    %% Trace cases have no return values.
+    NewCHL=set_activating_chl(TC,Id,CHL,Bindings,ProcH),
+    {ok,LD#ld{chl=NewCHL}}.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% sync_atc
+%% -----------------------------------------------------------------------------
+
+h_sync_atc(TC,Id,Vars,TimeOut,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL}) ->
+    case find_id_chl(TC,Id,CHL) of
+	activating ->                       % Already started.
+	    {error,activating};
+	stopping ->                         % Not yet stopped.
+	    {error,deactivating};
+	false ->
+	    case get_tracecase_tc_dict(TC,TCdict) of
+		{ok,TraceCase} ->           % Such a trace case exists.
+		    case check_bindings(Vars,TraceCase) of
+			{ok,Bindings} ->    % Necessary vars exists in Vars.
+			    {ok,TcFName}=get_tc_activate_fname(TraceCase),
+			    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
+			    Bindings2=erl_eval:add_binding('Nodes',Nodes,Bindings),
+			    RpcNode=get_rpc_nodename(CNode),
+			    case rpc:call(RpcNode,file,script,[TcFName,Bindings2],TimeOut) of
+				{ok,Value} ->
+				    FakeProcH=make_ref(),
+				    NewCHL1=set_activating_chl(TC,Id,CHL,Bindings,FakeProcH),
+				    NewCHL2=set_running_chl(FakeProcH,TC,Id,Value,NewCHL1),
+				    {ok,LD#ld{chl=NewCHL2},Value};
+				{error,Reason} ->
+				    {error,{faulty_tracecase,{TcFName,Reason}}};
+				{badrpc,Reason} ->
+				    {error,{badrpc,Reason}}
+			    end;
+			{error,Reason} ->   % Variable def missing.
+			    {error,Reason}
+		    end;
+		false ->
+		    {error,unknown_tracecase}
+	    end;
+	{ok,_Bindings} ->                   % Already activated and running.
+	    {error,already_started}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% rtc
+%% -----------------------------------------------------------------------------
+
+%% Function handling running a trace case without marking it as activated. It
+%% is in the history mearly indicated as activated
+h_sync_rtc(TC,Vars,TimeOut,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL}) ->
+    case get_tracecase_tc_dict(TC,TCdict) of
+	{ok,TraceCase} ->                   % Such a trace case exists.
+	    case check_bindings(Vars,TraceCase) of
+		{ok,Bindings} ->            % Necessary vars exists in Vars.
+		    {ok,TcFName}=get_tc_activate_fname(TraceCase),
+		    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
+		    Bindings2=erl_eval:add_binding('Nodes',Nodes,Bindings),
+		    RpcNode=get_rpc_nodename(CNode),
+		    case rpc:call(RpcNode,file,script,[TcFName,Bindings2],TimeOut) of
+			{ok,Value} ->
+			    {ok,LD#ld{chl=add_rtc_chl(TC,Bindings2,CHL)},Value};
+			{error,Reason} ->
+			    {error,{faulty_tracecase,{TcFName,Reason}}};
+			{badrpc,Reason} ->
+			    {error,{badrpc,Reason}}
+		    end;
+		{error,Reason} ->   % Variable def missing.
+		    {error,Reason}
+	    end;
+	false ->
+	    {error,unknown_tracecase}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% dtc
+%% -----------------------------------------------------------------------------
+
+%% Function handling turning a trace case off. The trace case must be registered
+%% as having an off mechanism. If it has an off mechanism and was previously entered
+%% into the Command History Log and is done with its activation phase, it will be
+%% executed and removed from the CHL.
+h_dtc(TC,Id,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL}) ->
+    case find_id_chl(TC,Id,CHL) of
+	{ok,Bindings} ->                    % Yes, we have turned it on before.
+	    case get_tracecase_tc_dict(TC,TCdict) of
+		{ok,TraceCase} ->
+		    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
+		    case exec_trace_case_off(CNode,TraceCase,Bindings,Nodes) of
+			{ok,ProcH} ->
+			    NewCHL=set_stopping_chl(TC,Id,CHL,ProcH),
+			    {ok,LD#ld{chl=NewCHL}};
+			{error,Reason} ->
+			    {error,Reason}
+		    end;
+		false ->                    % Strange, Id ok but no such trace case.
+		    {error,unknown_tracecase}
+	    end;
+	false ->                            % Not previously turned on.
+	    {error,unknown_id};
+	activating ->
+	    {error,activating};
+	stopping ->
+	    {error,already_deactivating}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% sync_dtc
+%% -----------------------------------------------------------------------------
+
+h_sync_dtc(TC,Id,TimeOut,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL}) ->
+    case find_id_chl(TC,Id,CHL) of
+	{ok,Bindings} ->                    % Yes, we have turned it on before.
+	    case get_tracecase_tc_dict(TC,TCdict) of
+		{ok,TraceCase} ->
+		    case get_tc_deactivate_fname(TraceCase) of
+			{ok,TcFName} ->
+			    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
+			    Bindings2=erl_eval:add_binding('Nodes',Nodes,Bindings),
+			    RpcNode=get_rpc_nodename(CNode),
+			    case rpc:call(RpcNode,file,script,[TcFName,Bindings2],TimeOut) of
+				{ok,Value} ->
+				    FakeProcH=make_ref(),
+				    NewCHL1=set_stopping_chl(TC,Id,CHL,FakeProcH),
+				    NewCHL2=nullify_chl(FakeProcH,TC,Id,NewCHL1),
+				    {ok,LD#ld{chl=NewCHL2},Value};
+				{error,Reason} -> % Script fault.
+				    {error,{faulty_tracecase,{TcFName,Reason}}};
+				{badrpc,Reason} ->
+				    {error,{badrpc,Reason}}
+			    end;
+			false ->
+			    {error,no_deactivation}
+		    end;
+		false ->                    % Strange, Id ok but no such trace case.
+		    {error,unknown_tracecase}
+	    end;
+	false ->                            % Not previously turned on.
+	    {error,unknown_id};
+	activating ->
+	    {error,activating};
+	stopping ->
+	    {error,already_deactivating}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% inviso
+%% -----------------------------------------------------------------------------
+
+%% Function executing one inviso command. The returnvalue from the inviso
+%% function call will be the return value to the client. The command is
+%% entered into the history command log.
+%% Note that the inviso call may have to be done at another node, dictated
+%% by the c_node field. Further, if the module name is not an atom it is
+%% most likely a regexp, which must be expanded at the regexp_node. Note
+%% this is only relevant for tp and tpl.
+h_inviso(Cmd,Args,LD=#ld{c_node=CNode,regexp_node=RegExpNode,chl=CHL}) ->
+    Arity=length(Args),
+    case check_proper_inviso_call(Cmd,Arity) of
+	{true,RegExpFlag} ->                % Yes it is an inviso call.
+	    Nodes=get_nodenames_running_nodes(LD#ld.nodes),
+	    case h_inviso_2(Cmd,Args,CNode,RegExpNode,RegExpFlag,Nodes) of
+		{ok,Result} ->
+		    case check_inviso_call_to_history(Cmd,Arity) of
+			true ->             % This function shall be added to chl.
+			    {ok,{Result,LD#ld{chl=add_inviso_call_chl(Cmd,Args,CHL)}}};
+			false ->            % Do not add it.
+			    {ok,{Result,LD}}
+		    end;
+		{error,Reason} ->
+		    {error,Reason}
+	    end;
+	false ->                            % Not an inviso function.
+	    {error,invalid_function_name}
+    end.
+
+h_inviso_2(Cmd,Args,undefined,_,_,_) ->     % A non distributed system.
+    case catch apply(inviso,Cmd,Args) of    % Regexp expansion only relevant when
+	{'EXIT',Reason} ->                  % distributed, here let inviso_rt expand.
+	    {error,{'EXIT',Reason}};
+	Result ->
+	    {ok,Result}
+    end;
+h_inviso_2(Cmd,Args,CNode,RegExpNode,RegExpFlag,Nodes) ->
+    case expand_module_regexps(Args,RegExpNode,Nodes,RegExpFlag) of
+	{ok,NewArgs} ->
+	    case catch inviso_tool_lib:inviso_cmd(CNode,Cmd,[Nodes|NewArgs]) of
+		{'EXIT',Reason} ->
+		    {error,{'EXIT',Reason}};
+		{error,{badrpc,Reason}} ->  % Includes runtime failure.
+		    {error,{badrpc,Reason}};
+		Result ->
+		    {ok,Result}
+	    end;
+	{error,Reason} ->
+	    {error,Reason}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% reactivate
+%% -----------------------------------------------------------------------------
+
+h_reactivate(_Node,undefined) ->            % The non-distributed case.
+    case inviso:cancel_suspension() of
+	ok ->
+	    ok;
+	{error,Reason} ->
+	    {error,Reason}
+    end;
+h_reactivate(Node,CNode) ->
+    case inviso_tool_lib:inviso_cmd(CNode,cancel_suspension,[[Node]]) of
+	{ok,[{Node,ok}]} ->
+	    ok;
+	{ok,[{Node,{error,Reason}}]} ->
+	    {error,Reason};
+	{error,Reason} ->
+	    {error,Reason}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% save_history
+%% -----------------------------------------------------------------------------
+
+h_save_history(HDir,Dir,FileName,SortedLog) ->
+    Dir0=
+	if
 	    is_list(HDir) ->                   % There is a history dir specified.
-		HDir;                       % Use it then.
-	    true ->
-		Dir                         % Else use the tool dir.
-	end,
-    case catch make_absolute_path(FileName,Dir0) of
+		HDir;                       % Use it then.
+	    true ->
+		Dir                         % Else use the tool dir.
+	end,
+    case catch make_absolute_path(FileName,Dir0) of
 	AbsFileName when is_list(AbsFileName) ->
-	    Log2=build_saved_history_data(SortedLog), % Remove stopped tracecases.
-	    case file:write_file(AbsFileName,term_to_binary(Log2)) of
-		ok ->
-		    {ok,AbsFileName};
-		{error,Reason} ->
-		    {error,{write_file,Reason}}
-	    end;
-	{'EXIT',_Reason} ->
-	    {error,{bad_filename,FileName}}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%%  get_autostart_data
-%% -----------------------------------------------------------------------------
-
-%% Help function building the structures used when exporting autostart information
-%% from the tool. Note that we remove the tool-dependency and insert the one
-%% specify in the get_autostart_data call.
-h_get_autostart_data(local_runtime,_,Dependency,ASD,M,F,TDGargs,OptsG) ->
-    CompleteTDGargs=call_tracer_data_generator_mkargs(local_runtime,TDGargs),
-    Opts0=start_runtime_components_mk_opts(local_runtime,OptsG),
-    Opts=[Dependency|lists:keydelete(dependency,1,Opts0)],
-    {ok,{ASD,{ok,{Opts,{tdg,{M,F,CompleteTDGargs}}}}}};
-
+	    Log2=build_saved_history_data(SortedLog), % Remove stopped tracecases.
+	    case file:write_file(AbsFileName,term_to_binary(Log2)) of
+		ok ->
+		    {ok,AbsFileName};
+		{error,Reason} ->
+		    {error,{write_file,Reason}}
+	    end;
+	{'EXIT',_Reason} ->
+	    {error,{bad_filename,FileName}}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%%  get_autostart_data
+%% -----------------------------------------------------------------------------
+
+%% Help function building the structures used when exporting autostart information
+%% from the tool. Note that we remove the tool-dependency and insert the one
+%% specify in the get_autostart_data call.
+h_get_autostart_data(local_runtime,_,Dependency,ASD,M,F,TDGargs,OptsG) ->
+    CompleteTDGargs=call_tracer_data_generator_mkargs(local_runtime,TDGargs),
+    Opts0=start_runtime_components_mk_opts(local_runtime,OptsG),
+    Opts=[Dependency|lists:keydelete(dependency,1,Opts0)],
+    {ok,{ASD,{ok,{Opts,{tdg,{M,F,CompleteTDGargs}}}}}};
+
 h_get_autostart_data(Nodes,CNode,Dependency,ASD,M,F,TDGargs,OptsG) when is_list(Nodes) ->
-    {ok,{ASD,h_get_autostart_data_2(Nodes,CNode,Dependency,M,F,TDGargs,OptsG)}};
-h_get_autostart_data(Nodes,_CNode,_Dependency,_ASD,_M,_F,_TDGargs,_OptsG) ->
-    {error,{badarg,Nodes}}.
-
-h_get_autostart_data_2([Node|Rest],CNode,Dependency,M,F,TDGargs,OptsG) ->
-    CompleteTDGargs=call_tracer_data_generator_mkargs(Node,TDGargs),
-    Opts0=start_runtime_components_mk_opts(Node,OptsG),
-    Opts=[Dependency|lists:keydelete(dependency,1,Opts0)],
-    [{Node,{ok,{Opts,{tdg,{M,F,CompleteTDGargs}}}}}|
-     h_get_autostart_data_2(Rest,CNode,Dependency,M,F,TDGargs,OptsG)];
-h_get_autostart_data_2([],_CNode,_Dependency,_M,_F,_TDGargs,_OptsG) ->
-    [].
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% flush
-%% -----------------------------------------------------------------------------
-
-h_flush(undefined,_Nodes) ->
-    inviso:flush();
-h_flush(CNode,Nodes) ->
-    inviso_tool_lib:inviso_cmd(CNode,flush,[Nodes]).
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% tc_executer_reply
-%% -----------------------------------------------------------------------------
-
-%% Function handling that a trace case has completed its activation phase and
-%% shall now be marked in the Command History Log as running.
-h_tc_activation_done(ProcH,Result,LD=#ld{chl=CHL}) ->
-    case find_tc_executer_chl(ProcH,CHL) of
-	{activating,{TC,Id}} ->
-	    case Result of
-		{ok,Value} ->               % The trace case is successful activated.
-		    {ok,LD#ld{chl=set_running_chl(ProcH,TC,Id,Value,CHL)}};
-		{error,_} ->                % Then pretend it never happend :-)
-		    {ok,LD#ld{chl=del_tc_chl(ProcH,TC,Id,CHL)}} % Remove it.
-	    end;
-	_ ->                                % Where did this come from?
-	    {ok,LD}                         % Well just ignore it then.
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Function handling that a trace case has completed its stopping phase and
-%% shall now be nulled in the Command History Log (meaning that it will not
-%% be repeated in the event of a reactivation).
-h_tc_stopping_done(ProcH,Result,LD=#ld{chl=CHL}) ->
-    case find_tc_executer_chl(ProcH,CHL) of
-	{stopping,{TC,Id}} ->
-	    case Result of
-		{ok,_Result} ->             % _Result is returned from the tracecase.
-		    {ok,LD#ld{chl=nullify_chl(ProcH,TC,Id,CHL)}};
-		{error,_} ->                % This is difficult, is it still active?
-		    {ok,LD#ld{chl=nullify_chl(ProcH,TC,Id,CHL)}}
-	    end;
-	_ ->                                % Strange.
-	    {ok,LD}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% Terminate.
-%% -----------------------------------------------------------------------------
-
-%% Help function stopping the inviso control component. Does not return
-%% anything significant.
-stop_inviso_at_c_node(undefined) ->         % Non distributed case.
-    inviso:stop();
-stop_inviso_at_c_node(CNode) ->
-    rpc:call(CNode,inviso,stop,[]).
-%% -----------------------------------------------------------------------------
-
-%% Help function that removes all trace patterns from the nodes that are not
-%% marked as such were patterns shall be left after stopping of inviso.
-%% Returns {ok,NodeResult} or {error,Reason}. In the non-distributed case
-%% 'ok' is returned incase of success, ot 'patterns_untouched'.
-remove_all_trace_patterns(undefined,KeepNodes,_Nodes) ->
-    case KeepNodes of
-	undefined ->                        % No, remove patterns from localruntime.
-	    inviso:ctp_all();
-	_ ->
-	    patterns_untouched
-    end;
-remove_all_trace_patterns(CNode,KeepNodes,Nodes) ->
-    Nodes2=lists:filter(fun(N)->not(lists:member(N,KeepNodes)) end,Nodes),
-    case inviso_tool_lib:inviso_cmd(CNode,ctp_all,[Nodes2]) of
-	{ok,NodeResults} ->
-	    F=fun(N) ->
-		      case lists:member(N,KeepNodes) of
-			  true ->
-			      {N,patterns_untouched};
-			  false ->
-			      case lists:keysearch(N,1,NodeResults) of
-				  {value,Result} ->
-				      Result; % {Node,ok}
-				  false ->  % Extremely strange.
-				      {N,{error,general_error}}
-			      end
-		      end
-	      end,
-	    {ok,lists:map(F,Nodes)};
-	{error,{badrpc,Reason}} ->
-	    {error,{inviso_control_node_error,Reason}};
-	{error,Reason} ->
-	    {error,Reason}
-    end.
-%% -----------------------------------------------------------------------------
-
-%% =============================================================================
-%% Second level help functions.
-%% =============================================================================
-
-%% Help function building a reply to a reconnection call based on which nodes
-%% where asked to be reconnected and which of those are actually now working.
-%% We actually make an effort to serve the return value in the same order as the
-%% nodes were mentioned in the original call (Nodes).
-build_reconnect_nodes_reply(local_runtime,local_runtime,_NodesErr,NodesD) ->
-    case get_state_nodes(local_runtime,NodesD) of
-	down ->
-	    {error,down};
-	{State,Status} ->
-	    {ok,{State,Status}}
-    end;
-build_reconnect_nodes_reply(local_runtime,_,NodesErr,_NodesD) ->
-    NodesErr;
-build_reconnect_nodes_reply([Node|Rest],Nodes2,NodesErr,NodesD) ->
-    case lists:member(Node,Nodes2) of
-	true ->                               % Ok, look in the #ld.nodes.
-	    case get_state_nodes(Node,NodesD) of
-		down ->                       % Somekind of failure, still down.
-		    [{Node,{error,down}}|
-		     build_reconnect_nodes_reply(Rest,Nodes2,NodesErr,NodesD)];
-		{State,Status} ->             % {State,Status}
-		    [{Node,{ok,{State,Status}}}|
-		     build_reconnect_nodes_reply(Rest,Nodes2,NodesErr,NodesD)]
-	    end;
-	false ->                              % Error already from the beginning.
-	    {value,{_,Error}}=lists:keysearch(Node,1,NodesErr),
-	    [{Node,Error}|build_reconnect_nodes_reply(Rest,Nodes2,NodesErr,NodesD)]
-    end;
-build_reconnect_nodes_reply([],_,_,_) ->
-    [].
-%% -----------------------------------------------------------------------------
-
-%% Help function building a return value to reinitiate_session. Nodes contains
-%% all involved nodes. If the node occurrs in NodesErr, we choose the error in
-%% NodesErr. Otherwise the returnvalue in ReturnVal is used.
-build_reinitiate_session_reply(Nodes,NodesErr,{ok,NodesResults}) ->
-    {ok,build_reinitiate_session_reply_2(Nodes,NodesErr,NodesResults)};
-build_reinitiate_session_reply(local_runtime,[],NodeResult) ->
-    NodeResult;
-build_reinitiate_session_reply(local_runtime,NodesErr,_NodeResult) ->
-    NodesErr.
-build_reinitiate_session_reply_2([Node|Rest],NodesErr,NodeResults) ->
-    case lists:keysearch(Node,1,NodesErr) of
-	{value,{_,Error}} ->
-	    [{Node,Error}|build_reinitiate_session_reply_2(Rest,NodesErr,NodeResults)];
-	false ->
-	    case lists:keysearch(Node,1,NodeResults) of
-		{value,Value} ->
-		    [Value|build_reinitiate_session_reply_2(Rest,NodesErr,NodeResults)]
-	    end
-    end;
-build_reinitiate_session_reply_2([],_NodesErr,_NodeResults) ->
-    [].
-%% -----------------------------------------------------------------------------
-
-%% Help function returning a history log where stop and stopping entries have
-%% been removed. Further all tracecase log entries must be set to running since
-%% there can not be such a thing as an activating tracecase stored away in a
-%% saved historyfile!
-%% We must also take away any #Ref.
-build_saved_history_data(SortedLog) ->
-    CleanedLog=
-	lists:filter(fun({_,_,Stop,_}) when Stop==stop;Stop==stopping -> false;
-			(_) -> true
-		     end,
-		     SortedLog),
-    lists:map(fun({{TC,Id},C,activating,B}) -> {{TC,Id},C,running,B};
-		 ({{TC,Id},C,S,B}) -> {{TC,Id},C,S,B};
-		 ({{M,F,Args,_Ref},C}) -> {{M,F,Args},C};
-		 ({{TC,_Ref},C,B}) -> {TC,C,B} % An rtc.
-	      end,
-	      CleanedLog).
-%% -----------------------------------------------------------------------------
-    
-%% This help function builds the AutoStartData structure which is returned from
-%% get_austostart_data. An AutoStartData structure is a list of trace-files and
-%% inviso commands. The order is significant since it is the idea that doing
-%% the trace case files and inviso commands in that order will bring a node to
-%% a certain state in a trace perspective.
-%% Returns {ok,AutoStartData} or {error,Reason}
-build_autostart_data(SortedLog,TCdict) ->
-    build_autostart_data_2(SortedLog,TCdict,[]).
-
-build_autostart_data_2([{_,_C,Stop,_B}|Rest],TCdict,Accum) when Stop==stop;Stop==stopping->
-    build_autostart_data_2(Rest,TCdict,Accum); % Simply skip deactivated/deativating.
-build_autostart_data_2([{{TCname,_},_C,activating,Bindings}|Rest],TCdict,Accum) ->
-    build_autostart_data_tc(TCname,Bindings,TCdict,Rest,Accum);
-build_autostart_data_2([{{TCname,_},_C,running,Bindings}|Rest],TCdict,Accum) ->
-    build_autostart_data_tc(TCname,Bindings,TCdict,Rest,Accum);
-build_autostart_data_2([{{TCname,_Ref},_C,Bindings}|Rest],TCdict,Accum) ->
-    build_autostart_data_tc(TCname,Bindings,TCdict,Rest,Accum);
-build_autostart_data_2([{{M,F,Args,_Ref},_C}|Rest],TCdict,Accum) ->
-    build_autostart_data_2(Rest,TCdict,[{mfa,{M,F,Args}}|Accum]);
-build_autostart_data_2([],_TCdict,Accum) ->
-    {ok,lists:reverse(Accum)}.
-
-%% Help function placing the filename in the AutoStartData structure.    
-build_autostart_data_tc(TCname,Bindings,TCdict,Rest,Accum) ->
-    {ok,TC}=get_tracecase_tc_dict(TCname,TCdict),
-    {ok,FName}=get_tc_activate_fname(TC),
-    build_autostart_data_2(Rest,TCdict,[{file,{FName,Bindings}}|Accum]).
-%% -----------------------------------------------------------------------------
-
-%% Help function generating tracerdata to init inviso tracing. The generation
-%% is done by the TracerDataGenerator, TDG, function.
-%% Individual tracerdata is generated for each node in Nodes.
-%% Returns {ok,TracerData} or {error,Reason}.
-call_tracer_data_generator(undefined,M,F,TDGargs,_Nodes) -> % Non distributed.
-    case catch call_tracer_data_generator_3(M,F,TDGargs,local_runtime) of
-	{'EXIT',Reason} ->
-	    {error,{'EXIT',Reason}};
-	TracerData ->
-	    {ok,TracerData}
-    end;
-call_tracer_data_generator(_CNode,M,F,TDGargs,Nodes) ->
-    case catch call_tracer_data_generator_2(M,F,TDGargs,Nodes) of
-	{'EXIT',Reason} ->
-	    {error,{'EXIT',Reason}};
-	TracerList ->
-	    {ok,TracerList}
-    end.
-
-call_tracer_data_generator_2(M,F,TDGargs,[Node|Rest]) ->
-    [{Node,call_tracer_data_generator_3(M,F,TDGargs,Node)}|
-     call_tracer_data_generator_2(M,F,TDGargs,Rest)];
-call_tracer_data_generator_2(_,_,_,[]) ->
-    [].
-
-call_tracer_data_generator_3(M,F,TDGargs,Node) ->
-    apply(M,F,call_tracer_data_generator_mkargs(Node,TDGargs)).
-
-%% This function creates the arguments that the tracer data generator function
-%% accepts (in an apply call). The reason for making it a sepparate function is
-%% that the arguments are constructed in more situations than just when actually
-%% doing the apply. By having a function it will become obvious where to change
-%% should the arguments change.
-call_tracer_data_generator_mkargs(Node,TDGargs) ->
-    inviso_tool_lib:mk_complete_tdg_args(Node,TDGargs).
-%% -----------------------------------------------------------------------------
-
-%% This function acts as standard options generator function. That is returning
-%% the options argument to inviso:add_node/3. Note that this function must not
-%% return the dependency part of that option.
-std_options_generator(_Node) ->
-    [].                                     % No particular options(!)
-%% -----------------------------------------------------------------------------
-
-
-%% Help function checking that Vars contains a binding for every variable
-%% listed in the VarNames field in TraceCase. Note that the special variable 'Nodes'
-%% is disregarded, since it is always added by the inviso_tool.
-%% Returns {ok,Bindings} or {error,Reason}. Where Bindings is a bindngs structure
-%% according to file:eval functionality.
-check_bindings(Vars,TraceCase) ->
-    case catch check_bindings_2(Vars,
-				get_tc_varnames(TraceCase),
-				erl_eval:new_bindings()) of
-	{'EXIT',_Reason} ->
-	    {error,variable_error};
-	{error,Reason} ->                   % Missing a bindning.
-	    {error,Reason};
-	{ok,Bindings} ->
-	    {ok,Bindings}
-    end.
-
-check_bindings_2(Vars,['Nodes'|Rest],Bindings) ->
-    check_bindings_2(Vars,Rest,Bindings);   % Disregard Nodes since it is automatic.
-check_bindings_2(Vars,[VarName|Rest],Bindings) ->
-    case lists:keysearch(VarName,1,Vars) of
-	{value,{_,Val}} ->
-	    check_bindings_2(Vars,Rest,erl_eval:add_binding(VarName,Val,Bindings));
-	false ->                            % Mandatory variable missing.
-	    {error,{missing_variable,VarName}} % Quite here then.
-    end;
-check_bindings_2(_,[],Bindings) ->
-    {ok,Bindings}.
-%% -----------------------------------------------------------------------------
-
-%% This help function checks that the command the user tries to do is amongst
-%% the inviso API. It at the same time returns what kind of command it is.
-%% {true,RegExpFlag} or 'false' where RegExpFlag indicates if this command
-%% needs to have its argument modified by module regexp expansion or not.
-check_proper_inviso_call(Cmd,Arity) ->
-    case lists:member({Cmd,Arity},?INVISO_CMDS) of
-	true ->                             % It is part of inviso API.
-	    {true,check_proper_inviso_call_regexp(Cmd,Arity)};
-	false ->
-	    false
-    end.
-
-%% Returns {Type,Arity,PlaceOfModuleSpec} or 'false'.
-check_proper_inviso_call_regexp(tp,5) -> {tp,5,1};
-check_proper_inviso_call_regexp(tp,4) -> {tp,4,1};
-check_proper_inviso_call_regexp(tp,1) -> {tp,1,1};
-check_proper_inviso_call_regexp(tpl,5) -> {tp,5,1};
-check_proper_inviso_call_regexp(tpl,4) -> {tp,4,1};
-check_proper_inviso_call_regexp(tpl,1) -> {tp,1,1};
-check_proper_inviso_call_regexp(ctp,3) -> {ctp,3,1};
-check_proper_inviso_call_regexp(ctp,1) -> {ctp,1,1};
-check_proper_inviso_call_regexp(ctpl,3) -> {ctp,3,1};
-check_proper_inviso_call_regexp(ctpl,1) -> {ctp,1,1};
-check_proper_inviso_call_regexp(_,_) ->      % No regexp expansion.
-    false.
-%% -----------------------------------------------------------------------------
-
-%% Help function checking if this inviso command shall be added to the command
-%% history log. Returns true or false.
-check_inviso_call_to_history(Cmd,Arity) ->
-    case lists:member({Cmd,Arity},?INVISO_CMD_HISTORY) of
-	true ->
-	    true;
-	false ->
-	    false
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Help function traversing the arguments and expanding module names stated
-%% as regular expressions. This means that the resulting arguments may be longer
-%% than the orginal ones.
-%% When we run this function it has been determined that we are a distributed
-%% system.
-%% Also note that if there are no regexps in Args, no regexpansion will be
-%% made and RegExpNode may be 'undefined' (as it is if not set at start-up).
-%% If RegExpNode is unavailable the nodes found in Nodes will be used until
-%% one that works is found.
-expand_module_regexps(Args,_RegExpNode,_Nodes,false) ->
-    {ok,Args};
-expand_module_regexps([PatternList],RegExpNode,Nodes,{tp,1,1}) ->
-    case catch expand_module_regexps_tp(PatternList,RegExpNode,Nodes) of
+    {ok,{ASD,h_get_autostart_data_2(Nodes,CNode,Dependency,M,F,TDGargs,OptsG)}};
+h_get_autostart_data(Nodes,_CNode,_Dependency,_ASD,_M,_F,_TDGargs,_OptsG) ->
+    {error,{badarg,Nodes}}.
+
+h_get_autostart_data_2([Node|Rest],CNode,Dependency,M,F,TDGargs,OptsG) ->
+    CompleteTDGargs=call_tracer_data_generator_mkargs(Node,TDGargs),
+    Opts0=start_runtime_components_mk_opts(Node,OptsG),
+    Opts=[Dependency|lists:keydelete(dependency,1,Opts0)],
+    [{Node,{ok,{Opts,{tdg,{M,F,CompleteTDGargs}}}}}|
+     h_get_autostart_data_2(Rest,CNode,Dependency,M,F,TDGargs,OptsG)];
+h_get_autostart_data_2([],_CNode,_Dependency,_M,_F,_TDGargs,_OptsG) ->
+    [].
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% flush
+%% -----------------------------------------------------------------------------
+
+h_flush(undefined,_Nodes) ->
+    inviso:flush();
+h_flush(CNode,Nodes) ->
+    inviso_tool_lib:inviso_cmd(CNode,flush,[Nodes]).
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% tc_executer_reply
+%% -----------------------------------------------------------------------------
+
+%% Function handling that a trace case has completed its activation phase and
+%% shall now be marked in the Command History Log as running.
+h_tc_activation_done(ProcH,Result,LD=#ld{chl=CHL}) ->
+    case find_tc_executer_chl(ProcH,CHL) of
+	{activating,{TC,Id}} ->
+	    case Result of
+		{ok,Value} ->               % The trace case is successful activated.
+		    {ok,LD#ld{chl=set_running_chl(ProcH,TC,Id,Value,CHL)}};
+		{error,_} ->                % Then pretend it never happend :-)
+		    {ok,LD#ld{chl=del_tc_chl(ProcH,TC,Id,CHL)}} % Remove it.
+	    end;
+	_ ->                                % Where did this come from?
+	    {ok,LD}                         % Well just ignore it then.
+    end.
+%% -----------------------------------------------------------------------------
+
+%% Function handling that a trace case has completed its stopping phase and
+%% shall now be nulled in the Command History Log (meaning that it will not
+%% be repeated in the event of a reactivation).
+h_tc_stopping_done(ProcH,Result,LD=#ld{chl=CHL}) ->
+    case find_tc_executer_chl(ProcH,CHL) of
+	{stopping,{TC,Id}} ->
+	    case Result of
+		{ok,_Result} ->             % _Result is returned from the tracecase.
+		    {ok,LD#ld{chl=nullify_chl(ProcH,TC,Id,CHL)}};
+		{error,_} ->                % This is difficult, is it still active?
+		    {ok,LD#ld{chl=nullify_chl(ProcH,TC,Id,CHL)}}
+	    end;
+	_ ->                                % Strange.
+	    {ok,LD}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% Terminate.
+%% -----------------------------------------------------------------------------
+
+%% Help function stopping the inviso control component. Does not return
+%% anything significant.
+stop_inviso_at_c_node(undefined) ->         % Non distributed case.
+    inviso:stop();
+stop_inviso_at_c_node(CNode) ->
+    rpc:call(CNode,inviso,stop,[]).
+%% -----------------------------------------------------------------------------
+
+%% Help function that removes all trace patterns from the nodes that are not
+%% marked as such were patterns shall be left after stopping of inviso.
+%% Returns {ok,NodeResult} or {error,Reason}. In the non-distributed case
+%% 'ok' is returned incase of success, ot 'patterns_untouched'.
+remove_all_trace_patterns(undefined,KeepNodes,_Nodes) ->
+    case KeepNodes of
+	undefined ->                        % No, remove patterns from localruntime.
+	    inviso:ctp_all();
+	_ ->
+	    patterns_untouched
+    end;
+remove_all_trace_patterns(CNode,KeepNodes,Nodes) ->
+    Nodes2=lists:filter(fun(N)->not(lists:member(N,KeepNodes)) end,Nodes),
+    case inviso_tool_lib:inviso_cmd(CNode,ctp_all,[Nodes2]) of
+	{ok,NodeResults} ->
+	    F=fun(N) ->
+		      case lists:member(N,KeepNodes) of
+			  true ->
+			      {N,patterns_untouched};
+			  false ->
+			      case lists:keysearch(N,1,NodeResults) of
+				  {value,Result} ->
+				      Result; % {Node,ok}
+				  false ->  % Extremely strange.
+				      {N,{error,general_error}}
+			      end
+		      end
+	      end,
+	    {ok,lists:map(F,Nodes)};
+	{error,{badrpc,Reason}} ->
+	    {error,{inviso_control_node_error,Reason}};
+	{error,Reason} ->
+	    {error,Reason}
+    end.
+%% -----------------------------------------------------------------------------
+
+%% =============================================================================
+%% Second level help functions.
+%% =============================================================================
+
+%% Help function building a reply to a reconnection call based on which nodes
+%% where asked to be reconnected and which of those are actually now working.
+%% We actually make an effort to serve the return value in the same order as the
+%% nodes were mentioned in the original call (Nodes).
+build_reconnect_nodes_reply(local_runtime,local_runtime,_NodesErr,NodesD) ->
+    case get_state_nodes(local_runtime,NodesD) of
+	down ->
+	    {error,down};
+	{State,Status} ->
+	    {ok,{State,Status}}
+    end;
+build_reconnect_nodes_reply(local_runtime,_,NodesErr,_NodesD) ->
+    NodesErr;
+build_reconnect_nodes_reply([Node|Rest],Nodes2,NodesErr,NodesD) ->
+    case lists:member(Node,Nodes2) of
+	true ->                               % Ok, look in the #ld.nodes.
+	    case get_state_nodes(Node,NodesD) of
+		down ->                       % Somekind of failure, still down.
+		    [{Node,{error,down}}|
+		     build_reconnect_nodes_reply(Rest,Nodes2,NodesErr,NodesD)];
+		{State,Status} ->             % {State,Status}
+		    [{Node,{ok,{State,Status}}}|
+		     build_reconnect_nodes_reply(Rest,Nodes2,NodesErr,NodesD)]
+	    end;
+	false ->                              % Error already from the beginning.
+	    {value,{_,Error}}=lists:keysearch(Node,1,NodesErr),
+	    [{Node,Error}|build_reconnect_nodes_reply(Rest,Nodes2,NodesErr,NodesD)]
+    end;
+build_reconnect_nodes_reply([],_,_,_) ->
+    [].
+%% -----------------------------------------------------------------------------
+
+%% Help function building a return value to reinitiate_session. Nodes contains
+%% all involved nodes. If the node occurrs in NodesErr, we choose the error in
+%% NodesErr. Otherwise the returnvalue in ReturnVal is used.
+build_reinitiate_session_reply(Nodes,NodesErr,{ok,NodesResults}) ->
+    {ok,build_reinitiate_session_reply_2(Nodes,NodesErr,NodesResults)};
+build_reinitiate_session_reply(local_runtime,[],NodeResult) ->
+    NodeResult;
+build_reinitiate_session_reply(local_runtime,NodesErr,_NodeResult) ->
+    NodesErr.
+build_reinitiate_session_reply_2([Node|Rest],NodesErr,NodeResults) ->
+    case lists:keysearch(Node,1,NodesErr) of
+	{value,{_,Error}} ->
+	    [{Node,Error}|build_reinitiate_session_reply_2(Rest,NodesErr,NodeResults)];
+	false ->
+	    case lists:keysearch(Node,1,NodeResults) of
+		{value,Value} ->
+		    [Value|build_reinitiate_session_reply_2(Rest,NodesErr,NodeResults)]
+	    end
+    end;
+build_reinitiate_session_reply_2([],_NodesErr,_NodeResults) ->
+    [].
+%% -----------------------------------------------------------------------------
+
+%% Help function returning a history log where stop and stopping entries have
+%% been removed. Further all tracecase log entries must be set to running since
+%% there can not be such a thing as an activating tracecase stored away in a
+%% saved historyfile!
+%% We must also take away any #Ref.
+build_saved_history_data(SortedLog) ->
+    CleanedLog=
+	lists:filter(fun({_,_,Stop,_}) when Stop==stop;Stop==stopping -> false;
+			(_) -> true
+		     end,
+		     SortedLog),
+    lists:map(fun({{TC,Id},C,activating,B}) -> {{TC,Id},C,running,B};
+		 ({{TC,Id},C,S,B}) -> {{TC,Id},C,S,B};
+		 ({{M,F,Args,_Ref},C}) -> {{M,F,Args},C};
+		 ({{TC,_Ref},C,B}) -> {TC,C,B} % An rtc.
+	      end,
+	      CleanedLog).
+%% -----------------------------------------------------------------------------
+    
+%% This help function builds the AutoStartData structure which is returned from
+%% get_austostart_data. An AutoStartData structure is a list of trace-files and
+%% inviso commands. The order is significant since it is the idea that doing
+%% the trace case files and inviso commands in that order will bring a node to
+%% a certain state in a trace perspective.
+%% Returns {ok,AutoStartData} or {error,Reason}
+build_autostart_data(SortedLog,TCdict) ->
+    build_autostart_data_2(SortedLog,TCdict,[]).
+
+build_autostart_data_2([{_,_C,Stop,_B}|Rest],TCdict,Accum) when Stop==stop;Stop==stopping->
+    build_autostart_data_2(Rest,TCdict,Accum); % Simply skip deactivated/deativating.
+build_autostart_data_2([{{TCname,_},_C,activating,Bindings}|Rest],TCdict,Accum) ->
+    build_autostart_data_tc(TCname,Bindings,TCdict,Rest,Accum);
+build_autostart_data_2([{{TCname,_},_C,running,Bindings}|Rest],TCdict,Accum) ->
+    build_autostart_data_tc(TCname,Bindings,TCdict,Rest,Accum);
+build_autostart_data_2([{{TCname,_Ref},_C,Bindings}|Rest],TCdict,Accum) ->
+    build_autostart_data_tc(TCname,Bindings,TCdict,Rest,Accum);
+build_autostart_data_2([{{M,F,Args,_Ref},_C}|Rest],TCdict,Accum) ->
+    build_autostart_data_2(Rest,TCdict,[{mfa,{M,F,Args}}|Accum]);
+build_autostart_data_2([],_TCdict,Accum) ->
+    {ok,lists:reverse(Accum)}.
+
+%% Help function placing the filename in the AutoStartData structure.    
+build_autostart_data_tc(TCname,Bindings,TCdict,Rest,Accum) ->
+    {ok,TC}=get_tracecase_tc_dict(TCname,TCdict),
+    {ok,FName}=get_tc_activate_fname(TC),
+    build_autostart_data_2(Rest,TCdict,[{file,{FName,Bindings}}|Accum]).
+%% -----------------------------------------------------------------------------
+
+%% Help function generating tracerdata to init inviso tracing. The generation
+%% is done by the TracerDataGenerator, TDG, function.
+%% Individual tracerdata is generated for each node in Nodes.
+%% Returns {ok,TracerData} or {error,Reason}.
+call_tracer_data_generator(undefined,M,F,TDGargs,_Nodes) -> % Non distributed.
+    case catch call_tracer_data_generator_3(M,F,TDGargs,local_runtime) of
+	{'EXIT',Reason} ->
+	    {error,{'EXIT',Reason}};
+	TracerData ->
+	    {ok,TracerData}
+    end;
+call_tracer_data_generator(_CNode,M,F,TDGargs,Nodes) ->
+    case catch call_tracer_data_generator_2(M,F,TDGargs,Nodes) of
+	{'EXIT',Reason} ->
+	    {error,{'EXIT',Reason}};
+	TracerList ->
+	    {ok,TracerList}
+    end.
+
+call_tracer_data_generator_2(M,F,TDGargs,[Node|Rest]) ->
+    [{Node,call_tracer_data_generator_3(M,F,TDGargs,Node)}|
+     call_tracer_data_generator_2(M,F,TDGargs,Rest)];
+call_tracer_data_generator_2(_,_,_,[]) ->
+    [].
+
+call_tracer_data_generator_3(M,F,TDGargs,Node) ->
+    apply(M,F,call_tracer_data_generator_mkargs(Node,TDGargs)).
+
+%% This function creates the arguments that the tracer data generator function
+%% accepts (in an apply call). The reason for making it a sepparate function is
+%% that the arguments are constructed in more situations than just when actually
+%% doing the apply. By having a function it will become obvious where to change
+%% should the arguments change.
+call_tracer_data_generator_mkargs(Node,TDGargs) ->
+    inviso_tool_lib:mk_complete_tdg_args(Node,TDGargs).
+%% -----------------------------------------------------------------------------
+
+%% This function acts as standard options generator function. That is returning
+%% the options argument to inviso:add_node/3. Note that this function must not
+%% return the dependency part of that option.
+std_options_generator(_Node) ->
+    [].                                     % No particular options(!)
+%% -----------------------------------------------------------------------------
+
+
+%% Help function checking that Vars contains a binding for every variable
+%% listed in the VarNames field in TraceCase. Note that the special variable 'Nodes'
+%% is disregarded, since it is always added by the inviso_tool.
+%% Returns {ok,Bindings} or {error,Reason}. Where Bindings is a bindngs structure
+%% according to file:eval functionality.
+check_bindings(Vars,TraceCase) ->
+    case catch check_bindings_2(Vars,
+				get_tc_varnames(TraceCase),
+				erl_eval:new_bindings()) of
+	{'EXIT',_Reason} ->
+	    {error,variable_error};
+	{error,Reason} ->                   % Missing a bindning.
+	    {error,Reason};
+	{ok,Bindings} ->
+	    {ok,Bindings}
+    end.
+
+check_bindings_2(Vars,['Nodes'|Rest],Bindings) ->
+    check_bindings_2(Vars,Rest,Bindings);   % Disregard Nodes since it is automatic.
+check_bindings_2(Vars,[VarName|Rest],Bindings) ->
+    case lists:keysearch(VarName,1,Vars) of
+	{value,{_,Val}} ->
+	    check_bindings_2(Vars,Rest,erl_eval:add_binding(VarName,Val,Bindings));
+	false ->                            % Mandatory variable missing.
+	    {error,{missing_variable,VarName}} % Quite here then.
+    end;
+check_bindings_2(_,[],Bindings) ->
+    {ok,Bindings}.
+%% -----------------------------------------------------------------------------
+
+%% This help function checks that the command the user tries to do is amongst
+%% the inviso API. It at the same time returns what kind of command it is.
+%% {true,RegExpFlag} or 'false' where RegExpFlag indicates if this command
+%% needs to have its argument modified by module regexp expansion or not.
+check_proper_inviso_call(Cmd,Arity) ->
+    case lists:member({Cmd,Arity},?INVISO_CMDS) of
+	true ->                             % It is part of inviso API.
+	    {true,check_proper_inviso_call_regexp(Cmd,Arity)};
+	false ->
+	    false
+    end.
+
+%% Returns {Type,Arity,PlaceOfModuleSpec} or 'false'.
+check_proper_inviso_call_regexp(tp,5) -> {tp,5,1};
+check_proper_inviso_call_regexp(tp,4) -> {tp,4,1};
+check_proper_inviso_call_regexp(tp,1) -> {tp,1,1};
+check_proper_inviso_call_regexp(tpl,5) -> {tp,5,1};
+check_proper_inviso_call_regexp(tpl,4) -> {tp,4,1};
+check_proper_inviso_call_regexp(tpl,1) -> {tp,1,1};
+check_proper_inviso_call_regexp(ctp,3) -> {ctp,3,1};
+check_proper_inviso_call_regexp(ctp,1) -> {ctp,1,1};
+check_proper_inviso_call_regexp(ctpl,3) -> {ctp,3,1};
+check_proper_inviso_call_regexp(ctpl,1) -> {ctp,1,1};
+check_proper_inviso_call_regexp(_,_) ->      % No regexp expansion.
+    false.
+%% -----------------------------------------------------------------------------
+
+%% Help function checking if this inviso command shall be added to the command
+%% history log. Returns true or false.
+check_inviso_call_to_history(Cmd,Arity) ->
+    case lists:member({Cmd,Arity},?INVISO_CMD_HISTORY) of
+	true ->
+	    true;
+	false ->
+	    false
+    end.
+%% -----------------------------------------------------------------------------
+
+%% Help function traversing the arguments and expanding module names stated
+%% as regular expressions. This means that the resulting arguments may be longer
+%% than the orginal ones.
+%% When we run this function it has been determined that we are a distributed
+%% system.
+%% Also note that if there are no regexps in Args, no regexpansion will be
+%% made and RegExpNode may be 'undefined' (as it is if not set at start-up).
+%% If RegExpNode is unavailable the nodes found in Nodes will be used until
+%% one that works is found.
+expand_module_regexps(Args,_RegExpNode,_Nodes,false) ->
+    {ok,Args};
+expand_module_regexps([PatternList],RegExpNode,Nodes,{tp,1,1}) ->
+    case catch expand_module_regexps_tp(PatternList,RegExpNode,Nodes) of
 	NewPatternList when is_list(NewPatternList) ->
-	    {ok,[NewPatternList]};
-	{error,Reason} ->
-	    {error,Reason}
-    end;
-expand_module_regexps([PatternList],RegExpNode,Nodes,{ctp,1,1}) ->
-    case catch expand_module_regexps_ctp(PatternList,RegExpNode,Nodes) of
+	    {ok,[NewPatternList]};
+	{error,Reason} ->
+	    {error,Reason}
+    end;
+expand_module_regexps([PatternList],RegExpNode,Nodes,{ctp,1,1}) ->
+    case catch expand_module_regexps_ctp(PatternList,RegExpNode,Nodes) of
 	NewPatternList when is_list(NewPatternList) ->
-	    {ok,[NewPatternList]};
-	{error,Reason} ->
-	    {error,Reason}
-    end;
-expand_module_regexps([M,F,Arity,MS,Opts],RegExpNode,Nodes,{tp,5,1}) ->
-    expand_module_regexps([[{M,F,Arity,MS,Opts}]],RegExpNode,Nodes,{tp,1,1});
-expand_module_regexps([M,F,Arity,MS],RegExpNode,Nodes,{tp,4,1}) ->
-    expand_module_regexps([[{M,F,Arity,MS,[]}]],RegExpNode,Nodes,{tp,1,1});
-expand_module_regexps([M,F,Arity],RegExpNode,Nodes,{ctp,3,1}) ->
-    expand_module_regexps([[{M,F,Arity}]],RegExpNode,Nodes,{ctp,1,1}).
-
-
+	    {ok,[NewPatternList]};
+	{error,Reason} ->
+	    {error,Reason}
+    end;
+expand_module_regexps([M,F,Arity,MS,Opts],RegExpNode,Nodes,{tp,5,1}) ->
+    expand_module_regexps([[{M,F,Arity,MS,Opts}]],RegExpNode,Nodes,{tp,1,1});
+expand_module_regexps([M,F,Arity,MS],RegExpNode,Nodes,{tp,4,1}) ->
+    expand_module_regexps([[{M,F,Arity,MS,[]}]],RegExpNode,Nodes,{tp,1,1});
+expand_module_regexps([M,F,Arity],RegExpNode,Nodes,{ctp,3,1}) ->
+    expand_module_regexps([[{M,F,Arity}]],RegExpNode,Nodes,{ctp,1,1}).
+
+
 expand_module_regexps_tp([E={M,_,_,_,_}|Rest],RegExpNode,Nodes) when is_atom(M) ->
-    [E|expand_module_regexps_tp(Rest,RegExpNode,Nodes)];
+    [E|expand_module_regexps_tp(Rest,RegExpNode,Nodes)];
 expand_module_regexps_tp([{M,F,Arity,MS,Opts}|Rest],RegExpNode,Nodes) when is_list(M);is_tuple(M) ->
-    case inviso_tool_lib:expand_module_names([RegExpNode],
-					     M,
-					     [{expand_only_at,RegExpNode}]) of
-	{singlenode_expansion,Modules} ->
-	    expand_module_regexps_tp_2(Modules,F,Arity,MS,Opts,Rest,RegExpNode,Nodes);
-	{error,{faulty_node,RegExpNode}} ->    % RegExpNode probably down.
-	    case Nodes of
-		[NewRegExpNode|RestNodes] ->   % Ok, just choose a node.
-		    expand_module_regexps_tp([{M,F,Arity,MS,Opts}|Rest],NewRegExpNode,RestNodes);
-		[] ->                          % No more nodes to choose from.
-		    throw({error,no_available_regexpnode})
-	    end;
-	{error,_Reason} ->
-	    expand_module_regexps_tp(Rest,RegExpNode,Nodes)
-    end;
-expand_module_regexps_tp([_|Rest],RegExpNode,Nodes) ->
-    expand_module_regexps_tp(Rest,RegExpNode,Nodes); % Skip faulty module specification.
-expand_module_regexps_tp([],_RegExpNodes,_Nodes) ->
-    [].
-
-expand_module_regexps_tp_2([M|MRest],F,Arity,MS,Opts,Rest,RegExpNode,Nodes) ->
-    [{M,F,Arity,MS,Opts}|
-     expand_module_regexps_tp_2(MRest,F,Arity,MS,Opts,Rest,RegExpNode,Nodes)];
-expand_module_regexps_tp_2([],_,_,_,_,Rest,RegExpNode,Nodes) ->
-    expand_module_regexps_tp(Rest,RegExpNode,Nodes).
-
+    case inviso_tool_lib:expand_module_names([RegExpNode],
+					     M,
+					     [{expand_only_at,RegExpNode}]) of
+	{singlenode_expansion,Modules} ->
+	    expand_module_regexps_tp_2(Modules,F,Arity,MS,Opts,Rest,RegExpNode,Nodes);
+	{error,{faulty_node,RegExpNode}} ->    % RegExpNode probably down.
+	    case Nodes of
+		[NewRegExpNode|RestNodes] ->   % Ok, just choose a node.
+		    expand_module_regexps_tp([{M,F,Arity,MS,Opts}|Rest],NewRegExpNode,RestNodes);
+		[] ->                          % No more nodes to choose from.
+		    throw({error,no_available_regexpnode})
+	    end;
+	{error,_Reason} ->
+	    expand_module_regexps_tp(Rest,RegExpNode,Nodes)
+    end;
+expand_module_regexps_tp([_|Rest],RegExpNode,Nodes) ->
+    expand_module_regexps_tp(Rest,RegExpNode,Nodes); % Skip faulty module specification.
+expand_module_regexps_tp([],_RegExpNodes,_Nodes) ->
+    [].
+
+expand_module_regexps_tp_2([M|MRest],F,Arity,MS,Opts,Rest,RegExpNode,Nodes) ->
+    [{M,F,Arity,MS,Opts}|
+     expand_module_regexps_tp_2(MRest,F,Arity,MS,Opts,Rest,RegExpNode,Nodes)];
+expand_module_regexps_tp_2([],_,_,_,_,Rest,RegExpNode,Nodes) ->
+    expand_module_regexps_tp(Rest,RegExpNode,Nodes).
+
 expand_module_regexps_ctp([E={M,_,_}|Rest],RegExpNode,Nodes) when is_atom(M) ->
-    [E|expand_module_regexps_ctp(Rest,RegExpNode,Nodes)];
+    [E|expand_module_regexps_ctp(Rest,RegExpNode,Nodes)];
 expand_module_regexps_ctp([{M,F,Arity}|Rest],RegExpNode,Nodes) when is_list(M);is_tuple(M) ->
-    case inviso_tool_lib:expand_module_names([RegExpNode],
-					     M,
-					     [{expand_only_at,RegExpNode}]) of
-	{singlenode_expansion,badrpc} ->       % RegExpNode probably down.
-	    case Nodes of
-		[NewRegExpNode|RestNodes] ->   % Ok, just choose a node.
-		    expand_module_regexps_ctp([{M,F,Arity}|Rest],NewRegExpNode,RestNodes);
-		[] ->                          % No more nodes to choose from.
-		    throw({error,no_available_regexpnode})
-	    end;
-	{singlenode_expansion,Modules} ->
-	    expand_module_regexps_ctp_2(Modules,F,Arity,Rest,RegExpNode,Nodes);
-	{error,_Reason} ->
-	    expand_module_regexps_ctp(Rest,RegExpNode,Nodes)
-    end;
-expand_module_regexps_ctp([_|Rest],RegExpNode,Nodes) ->
-    expand_module_regexps_tp(Rest,RegExpNode,Nodes); % Skip faulty module specification.
-expand_module_regexps_ctp([],_RegExpNodes,_Nodes) ->
-    [].
-
-expand_module_regexps_ctp_2([M|MRest],F,Arity,Rest,RegExpNode,Nodes) ->
-    [{M,F,Arity}|expand_module_regexps_ctp_2(MRest,F,Arity,Rest,RegExpNode,Nodes)];
-expand_module_regexps_ctp_2([],_,_,Rest,RegExpNode,Nodes) ->
-    expand_module_regexps_ctp(Rest,RegExpNode,Nodes).
-%% -----------------------------------------------------------------------------
-
-
-
-%% Help function running the activation of a trace case. Note that this must
-%% be done at the inviso control component's Erlang node *and* that it must be
-%% done in its own process since there is no telling for how long a trace case
-%% may run.
-%% Returns {ok,ActivationHandler}.
-exec_trace_case_on(CNode,TraceCase,Bindings,Nodes) ->
-    {ok,TcFName}=get_tc_activate_fname(TraceCase),
-    {ok,exec_trace_case_2(CNode,
-			  TcFName,
-			  erl_eval:add_binding('Nodes',Nodes,Bindings),
-			  activating)}.
-
-%% Help function running the deactivation of a trace case.
-exec_trace_case_off(CNode,TraceCase,Bindings,Nodes) ->
-    case get_tc_deactivate_fname(TraceCase) of
-	{ok,TcFName} ->                     % There is a deactivation.
-	    {ok,exec_trace_case_2(CNode,
-				  TcFName,
-				  erl_eval:add_binding('Nodes',Nodes,Bindings),
-				  stopping)};
-	false ->
-	    {error,no_deactivation}
-    end.
-
-exec_trace_case_2(CNode,TcFName,Bindings,Phase) ->
-    if
-	CNode==undefined ->                 % The non distributed case.
-	    spawn_link(?MODULE,tc_executer,[TcFName,Bindings,Phase,self()]);
-	true ->
-	    spawn_link(CNode,?MODULE,tc_executer,[TcFName,Bindings,Phase,self()])
-    end.
-
-%% This function is run in its own process and is responsible for executing
-%% the trace case.
-tc_executer(TcFName,Bindings,Phase,Parent) ->
-    case catch file:script(TcFName,Bindings) of
-	{ok,Value} ->
-	    tc_executer_reply(Parent,{Phase,self(),{ok,Value}});
-	{'EXIT',Reason} ->
-	    tc_executer_reply(Parent,{Phase,self(),{error,{'EXIT',Reason}}});
-	Error ->
-	    tc_executer_reply(Parent,{Phase,self(),Error})
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Help function which starts a reactivator process redoing command history at
-%% Node. It also updates the loopdata to indicate that Node is now in state
-%% reactivating. It is a good idea to only handle one node per reactivator process.
-%% This because if the node terminates and comes back up, the reactivator must be
-%% stopped.
-redo_cmd_history(Node,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL,nodes=NodesD}) ->
-    P=start_reactivator(Node,CNode,TCdict,CHL),
-    LD#ld{nodes=set_reactivating_nodes(Node,NodesD),
-	  reactivators=add_reactivators(Node,P,LD#ld.reactivators)}.
-
-%% Help function starting a reactivator process replaying the command history log.
-%% Returns a pid of the reactivator process.
-start_reactivator(Node,CNode,TCdict,CHL) ->
-    UnsortedLog=get_loglist_chl(CHL),       % Must fetch here, later on wrong node.
-    if
-	CNode==undefined ->                 % The non-distributed case.
-	    spawn_link(?MODULE,
-		       reactivator_executer,
-		       [Node,TCdict,UnsortedLog,self(),0,[]]);
-	true ->
-	    spawn_link(CNode,
-		       ?MODULE,
-		       reactivator_executer,
-		       [Node,TCdict,UnsortedLog,self(),0,[]])
-    end.
-
-%% The strategy is to traverse the CHL ETS table in Counter order, redoing the
-%% commands one by one. We wait until one command is finished until we do the
-%% next. Commands marked as nullified are not performed. In fact when a command
-%% is nullified only the stop will be found in the CHL. Its activation will be
-%% removed.
-reactivator_executer(Node,TCdict,UnsortedLog,TPid,StartCounter,DoneCases) ->
-    SortedLog=lists:keysort(2,UnsortedLog), % Sort on Counter, oldest first.
-    Log=reactivator_skip_log_entries(SortedLog,StartCounter),
-    case reactivator_executer_2(Node,TCdict,TPid,StartCounter,DoneCases,Log) of
-	done ->
-	    true;                           % Simply terminate the reactivator then.
-	{more,{NewStartCounter,NewDoneCases,NewUnsortedLog}} ->
-	    reactivator_executer(Node,TCdict,NewUnsortedLog,TPid,NewStartCounter,NewDoneCases)
-    end.
-
-reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
-		       [{{TCname,Id},NextC,running,Bindings}|Rest]) ->
-    reactivator_executer_3(Node,TCdict,TPid,DoneCases,Rest,TCname,Id,NextC,Bindings,Rest);
-reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
-		       [{{TCname,_Ref},NextC,Bindings}|Rest]) ->
-    reactivator_executer_rtc(Node,TCdict,TPid,DoneCases,Rest,TCname,NextC,Bindings,Rest);
-reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
-		       [{{TCname,Id},NextC,activating,Bindings}|Rest]) ->
-    reactivator_executer_3(Node,TCdict,TPid,DoneCases,Rest,TCname,Id,NextC,Bindings,Rest);
-reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
-		       [{{M,F,Args,_Ref},NextC}|Rest]) ->
-    reactivator_executer_cmd(Node,M,F,Args),
-    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
-reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
-		       [{{_TCname,_Id},NextC,stopping,_Bindings}|Rest]) ->
-    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
-reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
-		       [{{TCname,Id,_Ref},NextC,stop,Bindings}|Rest]) ->
-    case lists:member({TCname,Id},DoneCases) of
-	true ->                             % We have activated it, must stop then.
-	    case get_tracecase_tc_dict(TCname,TCdict) of
-		{ok,{_,_,_,_,FNameOff}} ->
-		    reactivator_executer_tc(Node,Bindings,FNameOff),
-		    NewDoneCases=lists:delete({TCname,Id},DoneCases),
-		    reactivator_executer_2(Node,TCdict,TPid,NextC,NewDoneCases,Rest);
-		{ok,_} ->                   % No stop-filename, strange!
-		    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
-		false ->                    % Even stranger, does not exist!?
-		    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest)
-	    end;
-	false ->                            % Never activated in the first place.
-	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest)
-    end;
-%% Done all log entries found this lap. See if there are more entries by now.
-reactivator_executer_2(_Node,_TCdict,TPid,Counter,DoneCases,[]) ->
-    case reactivator_reply(TPid,Counter) of % Ask the tool process for more entries.
-	done ->                             % No more entries in the CHL.
-	    done;
-	{more,NewUnsortedLog} ->            % Repeat the procedure
-	    {more,{Counter+1,DoneCases,NewUnsortedLog}} % with log entries from Counter+1.
-    end.
-
-%% This help function activates a tracecase.
-reactivator_executer_3(Node,TCdict,TPid,DoneCases,Rest,TCname,Id,NextC,Bindings,Rest) ->
-    case get_tracecase_tc_dict(TCname,TCdict) of
-	{ok,{_,_,_,FNameOn}} ->             % A case with just on functionality.
-	    reactivator_executer_tc(Node,Bindings,FNameOn),
-	    reactivator_executer_2(Node,TCdict,TPid,NextC,[{TCname,Id}|DoneCases],Rest);
-	{ok,{_,_,_,FNameOn,_}} ->
-	    reactivator_executer_tc(Node,Bindings,FNameOn),
-	    reactivator_executer_2(Node,TCdict,TPid,NextC,[{TCname,Id}|DoneCases],Rest);
-	false ->                            % Strange, does not exist anylonger!?
-	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest)
-    end.
-
-%% Help function executing a trace case in the reactivators context. Does not
-%% return anything significant.
-reactivator_executer_tc(Node,Bindings,FileName) ->
-    catch file:eval(FileName,erl_eval:add_binding('Nodes',[Node],Bindings)).
-
-%% Help function handling trace case that are simply executed - rtc.
-reactivator_executer_rtc(Node,TCdict,TPid,DoneCases,Rest,TCname,NextC,Bindings,Rest) ->
-    case get_tracecase_tc_dict(TCname,TCdict) of
-	{ok,{_,_,_,FNameOn}} ->             % A case with just on functionality.
-	    reactivator_executer_tc(Node,Bindings,FNameOn),
-	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
-	{ok,{_,_,_,FNameOn,_}} ->
-	    reactivator_executer_tc(Node,Bindings,FNameOn),
-	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
-	false ->                            % Strange, does not exist anylonger!?
-	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest)
-    end.
-
-reactivator_executer_cmd(nonode@nohost,M,F,Args) ->
-    catch apply(M,F,Args);                  % Non-distributed.
-reactivator_executer_cmd(Node,M,F,Args) ->
-    catch apply(M,F,[[Node]|Args]).
-
-%% Help function returning a list of log entries missing the first entries
-%% having a counter less or equal to C1.
-reactivator_skip_log_entries([{_,C,_,_}|Rest],C1) when C<C1 ->
-    reactivator_skip_log_entries(Rest,C1);
-reactivator_skip_log_entries([{_,C}|Rest],C1) when C<C1 ->
-    reactivator_skip_log_entries(Rest,C1);
-reactivator_skip_log_entries(Log,_) ->
-    Log.
-%% -----------------------------------------------------------------------------
-
-%% Help function returning the node name to use in an rpc call.
-get_rpc_nodename(undefined) ->
-    node();
-get_rpc_nodename(CNode) ->
-    CNode.
-%% -----------------------------------------------------------------------------
-
-mk_rt_tag() ->
-    inviso_tool.
-%% -----------------------------------------------------------------------------
-
-is_string([C|Rest]) when C>=32, C=<255 ->
-    is_string(Rest);
-is_string([]) ->
-    true;
-is_string(_) ->
-    false.
-%% -----------------------------------------------------------------------------
-
-	    
-%% -----------------------------------------------------------------------------
-%% Functions for handling the configuration file.
-%% -----------------------------------------------------------------------------
-
-%% The inviso tool is configured via start arguments and/or a configuration file.
-%% Start arguments will override any definitions in a configuration file.
-%% The configuration file is pointed out by either a start argument or the
-%% inviso application parameter 'inviso_tool_config_file'.
-
-%% Help function building the internal configuration structure. Configurations
-%% in the start argument will override parameters found in a configuration file.
-fetch_configuration(Config) ->
-    case fetch_config_filename(Config) of
-	{ok,FName} ->                       % We are supposed to use a conf-file.
-	    case read_config_file(FName) of
-		{ok,LD} ->                  % Managed to open a file.
-		    NewLD=read_config_list(LD,Config),
-		    {ok,NewLD};
-		{error,_Reason} ->          % Problem finding/opening file.
-		    LD=read_config_list(#ld{},Config),
-		    {ok,LD}
-	    end;
-	false ->                            % No filename specified.
-	    LD=read_config_list(#ld{},Config),
-	    {ok,LD}
-    end.
-
-%% Help function determining the name of the file which shall be consulted as
-%% the main configuration file.
-%% Returns {ok,FileName} or 'false'. The latter if no name could be determined.
-fetch_config_filename(Config) ->
-    case catch lists:keysearch(config_file,1,Config) of
+    case inviso_tool_lib:expand_module_names([RegExpNode],
+					     M,
+					     [{expand_only_at,RegExpNode}]) of
+	{singlenode_expansion,Modules} ->
+	    expand_module_regexps_ctp_2(Modules,F,Arity,Rest,RegExpNode,Nodes);
+	{error,_Reason} ->
+	    expand_module_regexps_ctp(Rest,RegExpNode,Nodes)
+    end;
+expand_module_regexps_ctp([_|Rest],RegExpNode,Nodes) ->
+    expand_module_regexps_tp(Rest,RegExpNode,Nodes); % Skip faulty module specification.
+expand_module_regexps_ctp([],_RegExpNodes,_Nodes) ->
+    [].
+
+expand_module_regexps_ctp_2([M|MRest],F,Arity,Rest,RegExpNode,Nodes) ->
+    [{M,F,Arity}|expand_module_regexps_ctp_2(MRest,F,Arity,Rest,RegExpNode,Nodes)];
+expand_module_regexps_ctp_2([],_,_,Rest,RegExpNode,Nodes) ->
+    expand_module_regexps_ctp(Rest,RegExpNode,Nodes).
+%% -----------------------------------------------------------------------------
+
+
+
+%% Help function running the activation of a trace case. Note that this must
+%% be done at the inviso control component's Erlang node *and* that it must be
+%% done in its own process since there is no telling for how long a trace case
+%% may run.
+%% Returns {ok,ActivationHandler}.
+exec_trace_case_on(CNode,TraceCase,Bindings,Nodes) ->
+    {ok,TcFName}=get_tc_activate_fname(TraceCase),
+    {ok,exec_trace_case_2(CNode,
+			  TcFName,
+			  erl_eval:add_binding('Nodes',Nodes,Bindings),
+			  activating)}.
+
+%% Help function running the deactivation of a trace case.
+exec_trace_case_off(CNode,TraceCase,Bindings,Nodes) ->
+    case get_tc_deactivate_fname(TraceCase) of
+	{ok,TcFName} ->                     % There is a deactivation.
+	    {ok,exec_trace_case_2(CNode,
+				  TcFName,
+				  erl_eval:add_binding('Nodes',Nodes,Bindings),
+				  stopping)};
+	false ->
+	    {error,no_deactivation}
+    end.
+
+exec_trace_case_2(CNode,TcFName,Bindings,Phase) ->
+    if
+	CNode==undefined ->                 % The non distributed case.
+	    spawn_link(?MODULE,tc_executer,[TcFName,Bindings,Phase,self()]);
+	true ->
+	    spawn_link(CNode,?MODULE,tc_executer,[TcFName,Bindings,Phase,self()])
+    end.
+
+%% This function is run in its own process and is responsible for executing
+%% the trace case.
+tc_executer(TcFName,Bindings,Phase,Parent) ->
+    case catch file:script(TcFName,Bindings) of
+	{ok,Value} ->
+	    tc_executer_reply(Parent,{Phase,self(),{ok,Value}});
+	{'EXIT',Reason} ->
+	    tc_executer_reply(Parent,{Phase,self(),{error,{'EXIT',Reason}}});
+	Error ->
+	    tc_executer_reply(Parent,{Phase,self(),Error})
+    end.
+%% -----------------------------------------------------------------------------
+
+%% Help function which starts a reactivator process redoing command history at
+%% Node. It also updates the loopdata to indicate that Node is now in state
+%% reactivating. It is a good idea to only handle one node per reactivator process.
+%% This because if the node terminates and comes back up, the reactivator must be
+%% stopped.
+redo_cmd_history(Node,LD=#ld{c_node=CNode,tc_dict=TCdict,chl=CHL,nodes=NodesD}) ->
+    P=start_reactivator(Node,CNode,TCdict,CHL),
+    LD#ld{nodes=set_reactivating_nodes(Node,NodesD),
+	  reactivators=add_reactivators(Node,P,LD#ld.reactivators)}.
+
+%% Help function starting a reactivator process replaying the command history log.
+%% Returns a pid of the reactivator process.
+start_reactivator(Node,CNode,TCdict,CHL) ->
+    UnsortedLog=get_loglist_chl(CHL),       % Must fetch here, later on wrong node.
+    if
+	CNode==undefined ->                 % The non-distributed case.
+	    spawn_link(?MODULE,
+		       reactivator_executer,
+		       [Node,TCdict,UnsortedLog,self(),0,[]]);
+	true ->
+	    spawn_link(CNode,
+		       ?MODULE,
+		       reactivator_executer,
+		       [Node,TCdict,UnsortedLog,self(),0,[]])
+    end.
+
+%% The strategy is to traverse the CHL ETS table in Counter order, redoing the
+%% commands one by one. We wait until one command is finished until we do the
+%% next. Commands marked as nullified are not performed. In fact when a command
+%% is nullified only the stop will be found in the CHL. Its activation will be
+%% removed.
+reactivator_executer(Node,TCdict,UnsortedLog,TPid,StartCounter,DoneCases) ->
+    SortedLog=lists:keysort(2,UnsortedLog), % Sort on Counter, oldest first.
+    Log=reactivator_skip_log_entries(SortedLog,StartCounter),
+    case reactivator_executer_2(Node,TCdict,TPid,StartCounter,DoneCases,Log) of
+	done ->
+	    true;                           % Simply terminate the reactivator then.
+	{more,{NewStartCounter,NewDoneCases,NewUnsortedLog}} ->
+	    reactivator_executer(Node,TCdict,NewUnsortedLog,TPid,NewStartCounter,NewDoneCases)
+    end.
+
+reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
+		       [{{TCname,Id},NextC,running,Bindings}|Rest]) ->
+    reactivator_executer_3(Node,TCdict,TPid,DoneCases,Rest,TCname,Id,NextC,Bindings,Rest);
+reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
+		       [{{TCname,_Ref},NextC,Bindings}|Rest]) ->
+    reactivator_executer_rtc(Node,TCdict,TPid,DoneCases,Rest,TCname,NextC,Bindings,Rest);
+reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
+		       [{{TCname,Id},NextC,activating,Bindings}|Rest]) ->
+    reactivator_executer_3(Node,TCdict,TPid,DoneCases,Rest,TCname,Id,NextC,Bindings,Rest);
+reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
+		       [{{M,F,Args,_Ref},NextC}|Rest]) ->
+    reactivator_executer_cmd(Node,M,F,Args),
+    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
+reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
+		       [{{_TCname,_Id},NextC,stopping,_Bindings}|Rest]) ->
+    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
+reactivator_executer_2(Node,TCdict,TPid,_Counter,DoneCases,
+		       [{{TCname,Id,_Ref},NextC,stop,Bindings}|Rest]) ->
+    case lists:member({TCname,Id},DoneCases) of
+	true ->                             % We have activated it, must stop then.
+	    case get_tracecase_tc_dict(TCname,TCdict) of
+		{ok,{_,_,_,_,FNameOff}} ->
+		    reactivator_executer_tc(Node,Bindings,FNameOff),
+		    NewDoneCases=lists:delete({TCname,Id},DoneCases),
+		    reactivator_executer_2(Node,TCdict,TPid,NextC,NewDoneCases,Rest);
+		{ok,_} ->                   % No stop-filename, strange!
+		    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
+		false ->                    % Even stranger, does not exist!?
+		    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest)
+	    end;
+	false ->                            % Never activated in the first place.
+	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest)
+    end;
+%% Done all log entries found this lap. See if there are more entries by now.
+reactivator_executer_2(_Node,_TCdict,TPid,Counter,DoneCases,[]) ->
+    case reactivator_reply(TPid,Counter) of % Ask the tool process for more entries.
+	done ->                             % No more entries in the CHL.
+	    done;
+	{more,NewUnsortedLog} ->            % Repeat the procedure
+	    {more,{Counter+1,DoneCases,NewUnsortedLog}} % with log entries from Counter+1.
+    end.
+
+%% This help function activates a tracecase.
+reactivator_executer_3(Node,TCdict,TPid,DoneCases,Rest,TCname,Id,NextC,Bindings,Rest) ->
+    case get_tracecase_tc_dict(TCname,TCdict) of
+	{ok,{_,_,_,FNameOn}} ->             % A case with just on functionality.
+	    reactivator_executer_tc(Node,Bindings,FNameOn),
+	    reactivator_executer_2(Node,TCdict,TPid,NextC,[{TCname,Id}|DoneCases],Rest);
+	{ok,{_,_,_,FNameOn,_}} ->
+	    reactivator_executer_tc(Node,Bindings,FNameOn),
+	    reactivator_executer_2(Node,TCdict,TPid,NextC,[{TCname,Id}|DoneCases],Rest);
+	false ->                            % Strange, does not exist anylonger!?
+	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest)
+    end.
+
+%% Help function executing a trace case in the reactivators context. Does not
+%% return anything significant.
+reactivator_executer_tc(Node,Bindings,FileName) ->
+    catch file:eval(FileName,erl_eval:add_binding('Nodes',[Node],Bindings)).
+
+%% Help function handling trace case that are simply executed - rtc.
+reactivator_executer_rtc(Node,TCdict,TPid,DoneCases,Rest,TCname,NextC,Bindings,Rest) ->
+    case get_tracecase_tc_dict(TCname,TCdict) of
+	{ok,{_,_,_,FNameOn}} ->             % A case with just on functionality.
+	    reactivator_executer_tc(Node,Bindings,FNameOn),
+	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
+	{ok,{_,_,_,FNameOn,_}} ->
+	    reactivator_executer_tc(Node,Bindings,FNameOn),
+	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest);
+	false ->                            % Strange, does not exist anylonger!?
+	    reactivator_executer_2(Node,TCdict,TPid,NextC,DoneCases,Rest)
+    end.
+
+reactivator_executer_cmd(nonode@nohost,M,F,Args) ->
+    catch apply(M,F,Args);                  % Non-distributed.
+reactivator_executer_cmd(Node,M,F,Args) ->
+    catch apply(M,F,[[Node]|Args]).
+
+%% Help function returning a list of log entries missing the first entries
+%% having a counter less or equal to C1.
+reactivator_skip_log_entries([{_,C,_,_}|Rest],C1) when C<C1 ->
+    reactivator_skip_log_entries(Rest,C1);
+reactivator_skip_log_entries([{_,C}|Rest],C1) when C<C1 ->
+    reactivator_skip_log_entries(Rest,C1);
+reactivator_skip_log_entries(Log,_) ->
+    Log.
+%% -----------------------------------------------------------------------------
+
+%% Help function returning the node name to use in an rpc call.
+get_rpc_nodename(undefined) ->
+    node();
+get_rpc_nodename(CNode) ->
+    CNode.
+%% -----------------------------------------------------------------------------
+
+mk_rt_tag() ->
+    inviso_tool.
+%% -----------------------------------------------------------------------------
+
+is_string([C|Rest]) when C>=32, C=<255 ->
+    is_string(Rest);
+is_string([]) ->
+    true;
+is_string(_) ->
+    false.
+%% -----------------------------------------------------------------------------
+
+	    
+%% -----------------------------------------------------------------------------
+%% Functions for handling the configuration file.
+%% -----------------------------------------------------------------------------
+
+%% The inviso tool is configured via start arguments and/or a configuration file.
+%% Start arguments will override any definitions in a configuration file.
+%% The configuration file is pointed out by either a start argument or the
+%% inviso application parameter 'inviso_tool_config_file'.
+
+%% Help function building the internal configuration structure. Configurations
+%% in the start argument will override parameters found in a configuration file.
+fetch_configuration(Config) ->
+    case fetch_config_filename(Config) of
+	{ok,FName} ->                       % We are supposed to use a conf-file.
+	    case read_config_file(FName) of
+		{ok,LD} ->                  % Managed to open a file.
+		    NewLD=read_config_list(LD,Config),
+		    {ok,NewLD};
+		Error = {error,_Reason} ->          % Problem finding/opening file.
+		    Error
+	    end;
+	false ->                            % No filename specified.
+	    LD=read_config_list(#ld{},Config),
+	    {ok,LD}
+    end.
+
+%% Help function determining the name of the file which shall be consulted as
+%% the main configuration file.
+%% Returns {ok,FileName} or 'false'. The latter if no name could be determined.
+fetch_config_filename(Config) ->
+    case catch lists:keysearch(config_file,1,Config) of
 	{value,{_,FName}} when is_list(FName) ->
-	    {ok,FName};
-	_ ->                                % No filename in the start argument.
-	    fetch_config_filename_2()
-    end.
-
-fetch_config_filename_2() ->
-    case application:get_env(inviso_tool_config_file) of
+	    {ok,FName};
+	_ ->                                % No filename in the start argument.
+	    fetch_config_filename_2()
+    end.
+
+fetch_config_filename_2() ->
+    case application:get_env(inviso_tool_config_file) of
 	{ok,FName} when is_list(FName) ->
-	    {ok,FName};
-	_ ->                                % Application parameter not specified.
-	    false                           % Means no config file will be used.
-    end.
-
-%% Help function reading the configuration file. Returns a #conf or {error,Reason}.
-read_config_file(FName) ->
-    case catch file:consult(FName) of
-	{ok,Terms} ->
-	    {ok,read_config_list(#ld{},Terms)};
-	{error,Reason} ->
-	    {error,{file_consult,Reason}};
-	{'EXIT',Reason} ->
-	    {error,{failure,Reason}}
-    end.
-
-%% Help function traversing the Terms list entering known tag-values into #ld.
-read_config_list(LD,Terms) ->
-    LD1=read_config_list_2(LD,Terms,nodes),
-    LD2=read_config_list_2(LD1,Terms,c_node),
-    LD3=read_config_list_2(LD2,Terms,regexp_node),
-    LD4=read_config_list_2(LD3,Terms,tc_def_file),
-    LD6=read_config_list_2(LD4,Terms,tdg),
-    LD8=read_config_list_2(LD6,Terms,debug),
-    LD10=read_config_list_2(LD8,Terms,initial_tcs),
-    LD11=read_config_list_2(LD10,Terms,dir),
-    _LD12=read_config_list_2(LD11,Terms,optg).
-
-read_config_list_2(LD,Terms,Tag) ->
-    case catch lists:keysearch(Tag,1,Terms) of
-	{value,{_,Value}} ->
-	    update_ld_record(LD,Tag,Value);
-	_ ->
-	    LD                              % Tag not found in Terms (or error!)
-    end.
-%% -----------------------------------------------------------------------------
-
-%% Function updating a named field in a record. Returns a new record. Note that
-%% this function must be maintained due the fact that field names are removed
-%% at compile time.
-update_ld_record(LD,nodes,Value) when is_record(LD,ld) ->
-    case mk_nodes(Value) of
-	{ok,NodesD} ->
-	    LD#ld{nodes=NodesD};
-	error ->
-	    LD
-    end;
-update_ld_record(LD,Tag,Value) when is_record(LD,ld) ->
-    Index=
-	case Tag of
-	    c_node ->                       % atom()
-		#ld.c_node;
-	    regexp_node ->                  % atom()
-		#ld.regexp_node;
-	    tc_def_file ->                  % string()
-		#ld.tc_def_file;
-	    initial_tcs ->                  % [{TCname,VarList},...]
-		#ld.initial_tcs;
-	    history_dir ->                  % string()
-		#ld.history_dir;
-	    debug ->                        % true | false
-		#ld.debug;
-	    dir ->                          % string()
-		#ld.dir;
-	    optg ->                         % {Mod,Func,Args}
-		#ld.optg;
-	    tdg ->                          % {Mod,Func,Args}
-		#ld.tdg;
-	    keep_nodes ->                   % [Nodes,...]
-		#ld.keep_nodes
-	end,
-    setelement(Index,LD,Value).             % Cheeting!
-%% -----------------------------------------------------------------------------
-
-
-%% Help function which, if it exists, consults the trace definition file. The
-%% idea behind the trace definition file is to point out which trace cases there
-%% are, where to find them and how to turn them on and off.
-%% Trace case definitions are:
-%% {TCname,Type,VariableNameList,ActivatioFileName} |
-%%     {TCname,Type,VariableNameList,ActivationFileName,DeactivationFileName}
-%%   TCname=atom()
-%%   Type=on | on_off
-%%   VariableNameList=[atom(),...]
-%%   ActivationFileName=DeactivationFileName=string()
-read_trace_case_definitions(LD) ->
-    case LD#ld.tc_def_file of
+	    {ok,FName};
+	_ ->                                % Application parameter not specified.
+	    false                           % Means no config file will be used.
+    end.
+
+%% Help function reading the configuration file. Returns a #conf or {error,Reason}.
+read_config_file(FName) ->
+    case catch file:consult(FName) of
+	{ok,Terms} ->
+	    {ok,read_config_list(#ld{},Terms)};
+	{error,Reason} ->
+	    {error,{file_consult,Reason}};
+	{'EXIT',Reason} ->
+	    {error,{failure,Reason}}
+    end.
+
+%% Help function traversing the Terms list entering known tag-values into #ld.
+read_config_list(LD,Terms) ->
+    LD#ld{
+      nodes = case mk_nodes(proplists:get_value(nodes,Terms,LD#ld.nodes)) of 
+		  {ok,Nodes} -> Nodes;
+		  _ -> LD#ld.nodes
+	      end,
+      c_node = proplists:get_value(c_node,Terms,LD#ld.c_node), % atom8)
+      regexp_node = proplists:get_value(regexp_node,Terms,LD#ld.regexp_node), % atom()
+      tc_def_file = proplists:get_value(tc_def_file,Terms,LD#ld.tc_def_file),
+      tdg = proplists:get_value(tdg,Terms,LD#ld.tdg),
+      debug = proplists:get_value(debug,Terms,LD#ld.debug),
+      initial_tcs = proplists:get_value(initial_tcs,Terms,LD#ld.initial_tcs),
+      dir = proplists:get_value(dir,Terms,LD#ld.dir),
+      optg = proplists:get_value(optg,Terms,LD#ld.optg)
+     }.
+
+%% -----------------------------------------------------------------------------
+
+
+%% Help function which, if it exists, consults the trace definition file. The
+%% idea behind the trace definition file is to point out which trace cases there
+%% are, where to find them and how to turn them on and off.
+%% Trace case definitions are:
+%% {TCname,Type,VariableNameList,ActivatioFileName} |
+%%     {TCname,Type,VariableNameList,ActivationFileName,DeactivationFileName}
+%%   TCname=atom()
+%%   Type=on | on_off
+%%   VariableNameList=[atom(),...]
+%%   ActivationFileName=DeactivationFileName=string()
+read_trace_case_definitions(LD) ->
+    case LD#ld.tc_def_file of
 	TCfileName when is_list(TCfileName) ->
-	    case catch file:consult(TCfileName) of
-		{ok,Terms} ->
-		    Dir=LD#ld.dir,          % The working directory of the tool.
-		    TCdict=read_trace_case_definitions_2(Terms,Dir,mk_tc_dict()),
-		    LD#ld{tc_dict=TCdict};
-		_ ->
-		    LD
-	    end;
-	_ ->
-	    LD
-    end.
-
-read_trace_case_definitions_2([{TCname,on,VarNames,FName}|Rest],Dir,TCdict) ->
-    FileName=make_absolute_path(FName,Dir),
-    read_trace_case_definitions_2(Rest,
-				  Dir,
-				  insert_tracecase_tc_dict(TCname,
-							   on,
-							   VarNames,
-							   FileName,
-							   TCdict));
-read_trace_case_definitions_2([{TCname,on_off,VarNames,FNameOn,FNameOff}|Rest],Dir,TCdict) ->
-    FileNameOn=make_absolute_path(FNameOn,Dir),
-    FileNameOff=make_absolute_path(FNameOff,Dir),
-    read_trace_case_definitions_2(Rest,
-				  Dir,
-				  insert_tracecase_tc_dict(TCname,
-							   on_off,
-							   VarNames,
-							   FileNameOn,
-							   FileNameOff,
-							   TCdict));
-read_trace_case_definitions_2([_|Rest],Dir,TCdict) ->
-    read_trace_case_definitions_2(Rest,Dir,TCdict);
-read_trace_case_definitions_2([],_Dir,TCdict) ->
-    TCdict.
-
-%% Help function returning an absolute path to FName if FName is not already
-%% absolute. Dir is the working dir of the tool and supposed to be absolute.
-make_absolute_path(FName,Dir) ->
-    case filename:pathtype(FName) of
-	absolute ->                         % Then do nothing, allready absolute.
-	    FName;
-	_ ->
-	    filename:join(Dir,FName)
-    end.    
-%% -----------------------------------------------------------------------------
-
-get_status(undefined,_Node) ->
-    inviso:get_status();
-get_status(CNode,Nodes) ->
-    inviso_tool_lib:inviso_cmd(CNode,get_status,[Nodes]).
-%% -----------------------------------------------------------------------------
-
-
-%% =============================================================================
-%% Internal data structure functions.
-%% =============================================================================
-
-%% -----------------------------------------------------------------------------
-%% The nodes database structure.
-%% -----------------------------------------------------------------------------
-
-%% The purpose of the nodes database structure is to keep track of what runtime
-%% nodes we have, and their current status.
-%% Implementation:
-%% [{NodeName,AvailableStatus},...] or AvailableStatus in the
-%%     non-distributed case.
-%%   AvailableStatus={up,Status1} | down
-%%     Status1={State,Status} | reactivating
-%%       State=tracing | inactive | trace_failure
-%%       Status=running | suspended
-%%         reactivating=the node is now being brought up to date.
-%%         inactive=not tracing, can be initiated and then reactivated.
-%% The following states can occure.
-%%   {inactive,running}
-%%     Mainly when we start the tool, before a session has been started.
-%%   {tracing,running}
-%%     When a trace session is on-going.
-%%   {trace_failure,running}
-%%     If init_tracing failed for some reason.
-%%   {tracing,suspended}
-%%   reactivating
-%%     The node is tracing (has always been) but was suspended. It is now
-%%     no longer suspended and the tool is redong commands.
-%%   {inactive,suspended}
-%%     We can end up here if a session is stopped with this node suspended.
-
-%% Returns a nodes database structure filled with the nodes Nodes.
+	    case catch file:consult(TCfileName) of
+		{ok,Terms} ->
+		    Dir=LD#ld.dir,          % The working directory of the tool.
+		    TCdict=read_trace_case_definitions_2(Terms,Dir,mk_tc_dict()),
+		    LD#ld{tc_dict=TCdict};
+		_ ->
+		    LD
+	    end;
+	_ ->
+	    LD
+    end.
+
+read_trace_case_definitions_2([{TCname,on,VarNames,FName}|Rest],Dir,TCdict) ->
+    FileName=make_absolute_path(FName,Dir),
+    read_trace_case_definitions_2(Rest,
+				  Dir,
+				  insert_tracecase_tc_dict(TCname,
+							   on,
+							   VarNames,
+							   FileName,
+							   TCdict));
+read_trace_case_definitions_2([{TCname,on_off,VarNames,FNameOn,FNameOff}|Rest],Dir,TCdict) ->
+    FileNameOn=make_absolute_path(FNameOn,Dir),
+    FileNameOff=make_absolute_path(FNameOff,Dir),
+    read_trace_case_definitions_2(Rest,
+				  Dir,
+				  insert_tracecase_tc_dict(TCname,
+							   on_off,
+							   VarNames,
+							   FileNameOn,
+							   FileNameOff,
+							   TCdict));
+read_trace_case_definitions_2([_|Rest],Dir,TCdict) ->
+    read_trace_case_definitions_2(Rest,Dir,TCdict);
+read_trace_case_definitions_2([],_Dir,TCdict) ->
+    TCdict.
+
+%% Help function returning an absolute path to FName if FName is not already
+%% absolute. Dir is the working dir of the tool and supposed to be absolute.
+make_absolute_path(FName,Dir) ->
+    case filename:pathtype(FName) of
+	absolute ->                         % Then do nothing, allready absolute.
+	    FName;
+	_ ->
+	    filename:join(Dir,FName)
+    end.    
+%% -----------------------------------------------------------------------------
+
+get_status(undefined,_Node) ->
+    inviso:get_status();
+get_status(CNode,Nodes) ->
+    inviso_tool_lib:inviso_cmd(CNode,get_status,[Nodes]).
+%% -----------------------------------------------------------------------------
+
+
+%% =============================================================================
+%% Internal data structure functions.
+%% =============================================================================
+
+%% -----------------------------------------------------------------------------
+%% The nodes database structure.
+%% -----------------------------------------------------------------------------
+
+%% The purpose of the nodes database structure is to keep track of what runtime
+%% nodes we have, and their current status.
+%% Implementation:
+%% [{NodeName,AvailableStatus},...] or AvailableStatus in the
+%%     non-distributed case.
+%%   AvailableStatus={up,Status1} | down
+%%     Status1={State,Status} | reactivating
+%%       State=tracing | inactive | trace_failure
+%%       Status=running | suspended
+%%         reactivating=the node is now being brought up to date.
+%%         inactive=not tracing, can be initiated and then reactivated.
+%% The following states can occure.
+%%   {inactive,running}
+%%     Mainly when we start the tool, before a session has been started.
+%%   {tracing,running}
+%%     When a trace session is on-going.
+%%   {trace_failure,running}
+%%     If init_tracing failed for some reason.
+%%   {tracing,suspended}
+%%   reactivating
+%%     The node is tracing (has always been) but was suspended. It is now
+%%     no longer suspended and the tool is redong commands.
+%%   {inactive,suspended}
+%%     We can end up here if a session is stopped with this node suspended.
+
+%% Returns a nodes database structure filled with the nodes Nodes.
 mk_nodes(Nodes) when is_list(Nodes) ->
     {ok,lists:map(fun(N) when is_atom(N)->{N,down} end,Nodes)};
-mk_nodes(local_runtime) ->                  % The non-distributed case.
-    down;
-mk_nodes(_Nodes) ->
-    error.
-%% -----------------------------------------------------------------------------
-
-%% Updates the nodes database structure for each node that has been added.
-%% This is the case when we start the tool or reactivate a node. Note that a node
-%% may have become adopted instead of started.
-%% Returns a new nodes database structure.
-update_added_nodes(CNode,[{Node,NodeResult}|Rest],NodesD) ->
-    case update_added_nodes_3(NodeResult) of
-	already_added ->                    % Already added to the control component.
-	    case get_status(CNode,[Node]) of % Examine if it is tracing or not.
-		{ok,[{Node,NodeResult2}]} ->
-		    Result=mk_nodes_state_from_status(NodeResult2),
-		    update_added_nodes_2(CNode,Node,Result,NodesD,Rest);
-		{error,_Reason} ->          % Strange, mark it as down now.
-		    update_added_nodes_2(CNode,Node,down,NodesD,Rest)
-	    end;
-	Result ->
-	    update_added_nodes_2(CNode,Node,Result,NodesD,Rest)
-    end;
-update_added_nodes(_CNode,[],NodesD) ->
-    NodesD;
-update_added_nodes(_CNode,NodeResult,_NodesD) -> % Non distributed case.
-    case update_added_nodes_3(NodeResult) of
-	already_added ->                    % Already added, most likely autostart.
-	    mk_nodes_state_from_status(inviso:get_status());
-	Result ->
-	    Result                          % Simply replace NodesD.
-    end.
-
-update_added_nodes_2(CNode,Node,Result,NodesD,Rest) ->
-    case lists:keysearch(Node,1,NodesD) of
-	{value,_} ->                        % Node already exists, replace!
-	    update_added_nodes(CNode,Rest,lists:keyreplace(Node,1,NodesD,{Node,Result}));
-	false ->                            % Strange, unknown node!
-	    update_added_nodes(CNode,Rest,NodesD)
-    end.
-
-update_added_nodes_3({ok,{adopted,tracing,running,_Tag}}) ->
-    {up,{tracing,running}};
-update_added_nodes_3({ok,{adopted,tracing,{suspended,_SReason},_Tag}}) ->
-    {up,{tracing,suspended}};
-update_added_nodes_3({ok,{adopted,_,running,_Tag}}) ->
-    {up,{inactive,running}};
-update_added_nodes_3({ok,{adopted,_,{suspended,_SReason},_Tag}}) ->
-    {up,{inactive,suspended}};
-update_added_nodes_3({ok,new}) ->
-    {up,{inactive,running}};
-update_added_nodes_3({ok,already_added}) ->
-    already_added;                          % This is an error value!
-update_added_nodes_3({error,_Reason}) ->
-    down.
-%% -----------------------------------------------------------------------------
-
-%% Function marking all nodes that, according to the returnvalue from init_tracing,
-%% now are successfully initiated as tracing and running. Note that nodes that
-%% does not fully respond 'ok' when init_tracing are marked as 'trace_failure'.
-%% Also note that we assume that the nodes must be running to have made it this far.
-%% A node can of course have become suspended in the process, but that node will
-%% be marked as suspended later when that inviso event message arrives to the tool.
-%% Returns {NewNodesD,Nodes} where Nodes are the nodes that actually got initiated
-%% as a result of the init_tracing call (judged from the LogResults).
-set_tracing_running_nodes(undefined,{ok,LogResults},_AvailableStatus) -> % Non-distr. case.
-    case set_tracing_running_nodes_checkresult(LogResults) of
-	ok ->
-	    {{up,{tracing,running}},local_runtime};
-	error ->
-	    {down,[]}
-    end;
-set_tracing_running_nodes(undefined,{error,already_initiated},_) -> % Non-distributed case.
-    {mk_nodes_state_from_status(inviso:get_status()),[]}; % Ask it for its status.
-set_tracing_running_nodes(undefined,{error,_Reason},_) -> % Non-distributed case.
-    {down,[]};                             % This is questionable!
-set_tracing_running_nodes(CNode,{ok,NodeResults},NodesD) ->
-    set_tracing_running_nodes_2(CNode,NodeResults,NodesD,[]).
-
-set_tracing_running_nodes_2(CNode,[{Node,{ok,LogResults}}|Rest],NodesD,Nodes) ->
-    case set_tracing_running_nodes_checkresult(LogResults) of
-	ok ->                              % The result is good.
-	    case lists:keysearch(Node,1,NodesD) of
-		{value,_} ->
-		    NewNodesD=lists:keyreplace(Node,1,NodesD,{Node,{up,{tracing,running}}}),
-		    set_tracing_running_nodes_2(CNode,Rest,NewNodesD,[Node|Nodes]);
-		false ->                   % Strange.
-		    set_tracing_running_nodes_2(CNode,Rest,NodesD,Nodes)
-	    end;
-	error ->                           % This node is not tracing correctly.
-	    NewNodesD=lists:keyreplace(Node,1,NodesD,{Node,down}),
-	    set_tracing_running_nodes_2(CNode,Rest,NewNodesD,Nodes)
-    end;
-set_tracing_running_nodes_2(CNode,[{Node,{error,already_initiated}}|Rest],NodesD,Nodes) ->
-    case get_status(CNode,[Node]) of       % Then we must ask what it is doing now.
-	{ok,[{Node,NodeResult}]} ->
-	    Result=mk_nodes_state_from_status(NodeResult),
-	    NewNodesD=lists:keyreplace(Node,1,NodesD,{Node,Result}),
-	    set_tracing_running_nodes_2(CNode,Rest,NewNodesD,Nodes);
-	{error,_Reason} ->                 % Strange, mark it as down.
-	    NewNodesD=lists:keyreplace(Node,1,NodesD,{Node,down}),
-	    set_tracing_running_nodes_2(CNode,Rest,NewNodesD,Nodes)
-    end;
-set_tracing_running_nodes_2(CNode,[{Node,{error,_Reason}}|Rest],NodesD,Nodes) ->
-    NewNodesD=lists:keyreplace(Node,1,NodesD,{Node,{up,{trace_failure,running}}}),
-    set_tracing_running_nodes_2(CNode,Rest,NewNodesD,Nodes);
-set_tracing_running_nodes_2(_CNode,[],NodesD,Nodes) ->
-    {NodesD,Nodes}.                        % New NodesD and nodes successfully initiated.
-
-%% Help function checking if a returnvalue from inviso:init_tracing really
-%% means that tracing has started as requested.
-set_tracing_running_nodes_checkresult(_LogResults) -> ok. % Should really be better!
-%% -----------------------------------------------------------------------------
-
-%% Function updating Node in the NodesD structure and sets it to 'down'.
-%% Returns a new nodes structure.
-set_down_nodes(Node,[{Node,_}|Rest]) ->
-    [{Node,down}|Rest];
-set_down_nodes(Node,[NodeStruct|Rest]) ->
-    [NodeStruct|set_down_nodes(Node,Rest)];
-set_down_nodes(_,[]) ->
-    [];
-set_down_nodes(_,_) ->                     % Non-distributed case.
-    down.                                  % One can argue if this can happend.
-%% -----------------------------------------------------------------------------
-
-%% Function updating Node in NodesD to now be suspended. Note that if the node is
-%% reactivating it must be moved to state tracing because that is what is doing.
-set_suspended_nodes(Node,[{Node,{up,reactivating}}|Rest]) ->
-    [{Node,{up,{tracing,suspended}}}|Rest];
-set_suspended_nodes(Node,[{Node,{up,{State,_}}}|Rest]) ->
-    [{Node,{up,{State,suspended}}}|Rest];
-set_suspended_nodes(Node,[NodesData|Rest]) ->
-    [NodesData|set_suspended_nodes(Node,Rest)];
-set_suspended_nodes(_Node,[]) ->           % Hmm, strange why did we end up here?
-    [];
-set_suspended_nodes(_,{up,reactivating}) -> % Non-distributed case.
-    {up,{tracing,suspended}};
-set_suspended_nodes(_,{up,{State,_}}) ->
-    {up,{State,suspended}}.
-%% -----------------------------------------------------------------------------
-
-%% This function is called when reactivation is completed. Hence it moves the
-%% node to no longer suspended. Note this can mean that the node is either
-%% tracing or inactive. Reactivation is not allowed for a node have trace_failure.
+mk_nodes(local_runtime) ->                  % The non-distributed case.
+    down;
+mk_nodes(_Nodes) ->
+    error.
+%% -----------------------------------------------------------------------------
+
+%% Updates the nodes database structure for each node that has been added.
+%% This is the case when we start the tool or reactivate a node. Note that a node
+%% may have become adopted instead of started.
+%% Returns a new nodes database structure.
+update_added_nodes(CNode,[{Node,NodeResult}|Rest],NodesD) ->
+    case update_added_nodes_3(NodeResult) of
+	already_added ->                    % Already added to the control component.
+	    case get_status(CNode,[Node]) of % Examine if it is tracing or not.
+		{ok,[{Node,NodeResult2}]} ->
+		    Result=mk_nodes_state_from_status(NodeResult2),
+		    update_added_nodes_2(CNode,Node,Result,NodesD,Rest);
+		{error,_Reason} ->          % Strange, mark it as down now.
+		    update_added_nodes_2(CNode,Node,down,NodesD,Rest)
+	    end;
+	Result ->
+	    update_added_nodes_2(CNode,Node,Result,NodesD,Rest)
+    end;
+update_added_nodes(_CNode,[],NodesD) ->
+    NodesD;
+update_added_nodes(_CNode,NodeResult,_NodesD) -> % Non distributed case.
+    case update_added_nodes_3(NodeResult) of
+	already_added ->                    % Already added, most likely autostart.
+	    mk_nodes_state_from_status(inviso:get_status());
+	Result ->
+	    Result                          % Simply replace NodesD.
+    end.
+
+update_added_nodes_2(CNode,Node,Result,NodesD,Rest) ->
+    case lists:keysearch(Node,1,NodesD) of
+	{value,_} ->                        % Node already exists, replace!
+	    update_added_nodes(CNode,Rest,lists:keyreplace(Node,1,NodesD,{Node,Result}));
+	false ->                            % Strange, unknown node!
+	    update_added_nodes(CNode,Rest,NodesD)
+    end.
+
+update_added_nodes_3({ok,{adopted,tracing,running,_Tag}}) ->
+    {up,{tracing,running}};
+update_added_nodes_3({ok,{adopted,tracing,{suspended,_SReason},_Tag}}) ->
+    {up,{tracing,suspended}};
+update_added_nodes_3({ok,{adopted,_,running,_Tag}}) ->
+    {up,{inactive,running}};
+update_added_nodes_3({ok,{adopted,_,{suspended,_SReason},_Tag}}) ->
+    {up,{inactive,suspended}};
+update_added_nodes_3({ok,new}) ->
+    {up,{inactive,running}};
+update_added_nodes_3({ok,already_added}) ->
+    already_added;                          % This is an error value!
+update_added_nodes_3({error,_Reason}) ->
+    down.
+%% -----------------------------------------------------------------------------
+
+%% Function marking all nodes that, according to the returnvalue from init_tracing,
+%% now are successfully initiated as tracing and running. Note that nodes that
+%% does not fully respond 'ok' when init_tracing are marked as 'trace_failure'.
+%% Also note that we assume that the nodes must be running to have made it this far.
+%% A node can of course have become suspended in the process, but that node will
+%% be marked as suspended later when that inviso event message arrives to the tool.
+%% Returns {NewNodesD,Nodes} where Nodes are the nodes that actually got initiated
+%% as a result of the init_tracing call (judged from the LogResults).
+set_tracing_running_nodes(undefined,{ok,_LogResults},_AvailableStatus) -> % Non-distr. case.
+    {{up,{tracing,running}},local_runtime};
+set_tracing_running_nodes(undefined,{error,already_initiated},_) -> % Non-distributed case.
+    {mk_nodes_state_from_status(inviso:get_status()),[]}; % Ask it for its status.
+set_tracing_running_nodes(undefined,{error,_Reason},_) -> % Non-distributed case.
+    {down,[]};                             % This is questionable!
+set_tracing_running_nodes(CNode,{ok,NodeResults},NodesD) ->
+    set_tracing_running_nodes_2(CNode,NodeResults,NodesD,[]).
+
+set_tracing_running_nodes_2(CNode,[{Node,{ok,_LogResults}}|Rest],NodesD,Nodes) ->
+    case lists:keysearch(Node,1,NodesD) of
+	{value,_} ->
+	    NewNodesD=lists:keyreplace(Node,1,NodesD,{Node,{up,{tracing,running}}}),
+	    set_tracing_running_nodes_2(CNode,Rest,NewNodesD,[Node|Nodes]);
+	false ->                   % Strange.
+	    set_tracing_running_nodes_2(CNode,Rest,NodesD,Nodes)
+    end;
+set_tracing_running_nodes_2(CNode,[{Node,{error,already_initiated}}|Rest],NodesD,Nodes) ->
+    case get_status(CNode,[Node]) of       % Then we must ask what it is doing now.
+	{ok,[{Node,NodeResult}]} ->
+	    Result=mk_nodes_state_from_status(NodeResult),
+	    NewNodesD=lists:keyreplace(Node,1,NodesD,{Node,Result}),
+	    set_tracing_running_nodes_2(CNode,Rest,NewNodesD,Nodes);
+	{error,_Reason} ->                 % Strange, mark it as down.
+	    NewNodesD=lists:keyreplace(Node,1,NodesD,{Node,down}),
+	    set_tracing_running_nodes_2(CNode,Rest,NewNodesD,Nodes)
+    end;
+set_tracing_running_nodes_2(CNode,[{Node,{error,_Reason}}|Rest],NodesD,Nodes) ->
+    NewNodesD=lists:keyreplace(Node,1,NodesD,{Node,{up,{trace_failure,running}}}),
+    set_tracing_running_nodes_2(CNode,Rest,NewNodesD,Nodes);
+set_tracing_running_nodes_2(_CNode,[],NodesD,Nodes) ->
+    {NodesD,Nodes}.                        % New NodesD and nodes successfully initiated.
+
+%% -----------------------------------------------------------------------------
+
+%% Function updating Node in the NodesD structure and sets it to 'down'.
+%% Returns a new nodes structure.
+set_down_nodes(Node,[{Node,_}|Rest]) ->
+    [{Node,down}|Rest];
+set_down_nodes(Node,[NodeStruct|Rest]) ->
+    [NodeStruct|set_down_nodes(Node,Rest)];
+set_down_nodes(_,[]) ->
+    [];
+set_down_nodes(_,_) ->                     % Non-distributed case.
+    down.                                  % One can argue if this can happend.
+%% -----------------------------------------------------------------------------
+
+%% Function updating Node in NodesD to now be suspended. Note that if the node is
+%% reactivating it must be moved to state tracing because that is what is doing.
+set_suspended_nodes(Node,[{Node,{up,reactivating}}|Rest]) ->
+    [{Node,{up,{tracing,suspended}}}|Rest];
+set_suspended_nodes(Node,[{Node,{up,{State,_}}}|Rest]) ->
+    [{Node,{up,{State,suspended}}}|Rest];
+set_suspended_nodes(Node,[NodesData|Rest]) ->
+    [NodesData|set_suspended_nodes(Node,Rest)];
+set_suspended_nodes(_Node,[]) ->           % Hmm, strange why did we end up here?
+    [];
+set_suspended_nodes(_,{up,reactivating}) -> % Non-distributed case.
+    {up,{tracing,suspended}};
+set_suspended_nodes(_,{up,{State,_}}) ->
+    {up,{State,suspended}}.
+%% -----------------------------------------------------------------------------
+
+%% This function is called when reactivation is completed. Hence it moves the
+%% node to no longer suspended. Note this can mean that the node is either
+%% tracing or inactive. Reactivation is not allowed for a node have trace_failure.
 set_running_nodes(Node,NodesD) when is_list(NodesD) ->
-    case lists:keysearch(Node,1,NodesD) of
-	{value,{_,AvailableStatus}} ->
-	    lists:keyreplace(Node,1,NodesD,{Node,set_running_nodes_2(AvailableStatus)});
-	false ->                           % Very strange!
-	    NodesD
-    end;
-set_running_nodes(_,NodesD) ->             % The non-distributed case.
-    set_running_nodes_2(NodesD).
-
-set_running_nodes_2({up,reactivating}) ->
-    {up,{tracing,running}};
-set_running_nodes_2({up,{State,suspended}}) ->
-    {up,{State,running}}.
-%% -----------------------------------------------------------------------------
-
-%% Function marking node as now reactivating. That means it is not suspended
-%% any longer (and tracing), but still not part of the set of nodes which shall
-%% get all commands. Returns a new NodesD.
-set_reactivating_nodes(Node,[{Node,_}|Rest]) ->
-    [{Node,{up,reactivating}}|Rest];
-set_reactivating_nodes(Node,[NodesData|Rest]) ->
-    [NodesData|set_reactivating_nodes(Node,Rest)];
-set_reactivating_nodes(_,[]) ->
-    [];
-set_reactivating_nodes(_,{up,_}) ->        % The non-distributed case.
-    {up,reactivating}.
-%% -----------------------------------------------------------------------------
-
-%% Function called when stop-tracing is done. That is all nodes in Nodes shall
-%% be inactive now. Note that an inactive node can still be suspended.
-%% Returns a new NodesD.
-set_inactive_nodes(_,{up,reactivating}) -> % Non-distributed case.
-    {up,{inactive,running}};
-set_inactive_nodes(_,{up,{_,Status}}) ->   % Tracing or trace_failure.
-    {up,{inactive,Status}};
-set_inactive_nodes(_,down) ->
-    down;
-set_inactive_nodes([{Node,ok}|Rest],NodesD) ->
-    case lists:keysearch(Node,1,NodesD) of
-	{value,{_,{up,reactivating}}} ->
-	    set_inactive_nodes(Rest,lists:keyreplace(Node,1,NodesD,{Node,{up,{inactive,running}}}));
-	{value,{_,{up,{_,Status}}}} ->     % Tracing or trace_failure.
-	    set_inactive_nodes(Rest,lists:keyreplace(Node,1,NodesD,{Node,{up,{inactive,Status}}}));
-	_ ->                               % This should not happend.
-	    set_inactive_nodes(Rest,NodesD)
-    end;
-set_inactive_nodes([{_Node,_Error}|Rest],NodesD) ->
-    set_inactive_nodes(Rest,NodesD);
-set_inactive_nodes([],NodesD) ->
-    NodesD.
-%% -----------------------------------------------------------------------------
-
-%% Returns a list of all node names. Note that it can only be used in the
-%% distributed case.
-get_all_nodenames_nodes(NodesD) ->
-    lists:map(fun({Node,_})->Node end,NodesD).
-%% -----------------------------------------------------------------------------
-
-%% Returns a list of all nodes that are up, tracing and running (not suspended),
-%% or 'void' in the non-distributed case. This is the list of nodes that shall get
-%% inviso commands.
-get_nodenames_running_nodes([{Node,{up,{tracing,running}}}|Rest]) ->
-    [Node|get_nodenames_running_nodes(Rest)];
-get_nodenames_running_nodes([{_Node,_}|Rest]) ->
-    get_nodenames_running_nodes(Rest);
-get_nodenames_running_nodes([]) ->
-    [];
-get_nodenames_running_nodes(_) ->
-    void.                                   % When non distributed, N/A.
-%% -----------------------------------------------------------------------------
-
-%% Returns a list of nodes that can be made to initiate tracing.
-get_inactive_running_nodes({up,{inactive,running}}) ->
-    local_runtime;
-get_inactive_running_nodes(NonDistributed) when not(is_list(NonDistributed)) ->
-    [];
-get_inactive_running_nodes([{Node,{up,{inactive,running}}}|Rest]) ->
-    [Node|get_inactive_running_nodes(Rest)];
-get_inactive_running_nodes([{_Node,_}|Rest]) ->
-    get_inactive_running_nodes(Rest);
-get_inactive_running_nodes([]) ->
-    [].
-%% -----------------------------------------------------------------------------
-
-%% Returns a list of nodes that are currently tracing (not necessarily running).
-%% In the non-distributed case the status of the runtime component will be
-%% returned.
-%% Note that nodes showing trace_failure will be included since we like to stop
-%% tracing at those nodes too.
-get_tracing_nodes([{Node,{up,{tracing,_}}}|Rest]) ->
-    [Node|get_tracing_nodes(Rest)];
-get_tracing_nodes([{Node,{up,{trace_failure,_}}}|Rest]) ->
-    [Node|get_tracing_nodes(Rest)];
-get_tracing_nodes([{Node,{up,reactivating}}|Rest]) ->
-    [Node|get_tracing_nodes(Rest)];
-get_tracing_nodes([_|Rest]) ->
-    get_tracing_nodes(Rest);
-get_tracing_nodes([]) ->
-    [];
-get_tracing_nodes(AvailableStatus) ->
-    AvailableStatus.
-%% -----------------------------------------------------------------------------
-
-%% Returns a list of all nodes that are currently up.
-get_available_nodes(down) ->
-    undefined;
-get_available_nodes([{_Node,down}|Rest]) ->
-    get_available_nodes(Rest);
-get_available_nodes([{Node,_}|Rest]) ->
-    [Node|get_available_nodes(Rest)];
-get_available_nodes([]) ->
-    [].
-%% -----------------------------------------------------------------------------
-
-%% Function returning the "state" of Node. Mainly used to check if the node is
-%% suspended or not.
-%% Returns {State,Status} | reactivating | down
-%% where 
+    case lists:keysearch(Node,1,NodesD) of
+	{value,{_,AvailableStatus}} ->
+	    lists:keyreplace(Node,1,NodesD,{Node,set_running_nodes_2(AvailableStatus)});
+	false ->                           % Very strange!
+	    NodesD
+    end;
+set_running_nodes(_,NodesD) ->             % The non-distributed case.
+    set_running_nodes_2(NodesD).
+
+set_running_nodes_2({up,reactivating}) ->
+    {up,{tracing,running}};
+set_running_nodes_2({up,{State,suspended}}) ->
+    {up,{State,running}}.
+%% -----------------------------------------------------------------------------
+
+%% Function marking node as now reactivating. That means it is not suspended
+%% any longer (and tracing), but still not part of the set of nodes which shall
+%% get all commands. Returns a new NodesD.
+set_reactivating_nodes(Node,[{Node,_}|Rest]) ->
+    [{Node,{up,reactivating}}|Rest];
+set_reactivating_nodes(Node,[NodesData|Rest]) ->
+    [NodesData|set_reactivating_nodes(Node,Rest)];
+set_reactivating_nodes(_,[]) ->
+    [];
+set_reactivating_nodes(_,{up,_}) ->        % The non-distributed case.
+    {up,reactivating}.
+%% -----------------------------------------------------------------------------
+
+%% Function called when stop-tracing is done. That is all nodes in Nodes shall
+%% be inactive now. Note that an inactive node can still be suspended.
+%% Returns a new NodesD.
+set_inactive_nodes(_,{up,reactivating}) -> % Non-distributed case.
+    {up,{inactive,running}};
+set_inactive_nodes(_,{up,{_,Status}}) ->   % Tracing or trace_failure.
+    {up,{inactive,Status}};
+set_inactive_nodes(_,down) ->
+    down;
+set_inactive_nodes([{Node,ok}|Rest],NodesD) ->
+    case lists:keysearch(Node,1,NodesD) of
+	{value,{_,{up,reactivating}}} ->
+	    set_inactive_nodes(Rest,lists:keyreplace(Node,1,NodesD,{Node,{up,{inactive,running}}}));
+	{value,{_,{up,{_,Status}}}} ->     % Tracing or trace_failure.
+	    set_inactive_nodes(Rest,lists:keyreplace(Node,1,NodesD,{Node,{up,{inactive,Status}}}));
+	_ ->                               % This should not happend.
+	    set_inactive_nodes(Rest,NodesD)
+    end;
+set_inactive_nodes([{_Node,_Error}|Rest],NodesD) ->
+    set_inactive_nodes(Rest,NodesD);
+set_inactive_nodes([],NodesD) ->
+    NodesD.
+%% -----------------------------------------------------------------------------
+
+%% Returns a list of all node names. Note that it can only be used in the
+%% distributed case.
+get_all_nodenames_nodes(NodesD) ->
+    lists:map(fun({Node,_})->Node end,NodesD).
+%% -----------------------------------------------------------------------------
+
+%% Returns a list of all nodes that are up, tracing and running (not suspended),
+%% or 'void' in the non-distributed case. This is the list of nodes that shall get
+%% inviso commands.
+get_nodenames_running_nodes([{Node,{up,{tracing,running}}}|Rest]) ->
+    [Node|get_nodenames_running_nodes(Rest)];
+get_nodenames_running_nodes([{_Node,_}|Rest]) ->
+    get_nodenames_running_nodes(Rest);
+get_nodenames_running_nodes([]) ->
+    [];
+get_nodenames_running_nodes(_) ->
+    void.                                   % When non distributed, N/A.
+%% -----------------------------------------------------------------------------
+
+%% Returns a list of nodes that can be made to initiate tracing.
+get_inactive_running_nodes({up,{inactive,running}}) ->
+    local_runtime;
+get_inactive_running_nodes(NonDistributed) when not(is_list(NonDistributed)) ->
+    [];
+get_inactive_running_nodes([{Node,{up,{inactive,running}}}|Rest]) ->
+    [Node|get_inactive_running_nodes(Rest)];
+get_inactive_running_nodes([{_Node,_}|Rest]) ->
+    get_inactive_running_nodes(Rest);
+get_inactive_running_nodes([]) ->
+    [].
+%% -----------------------------------------------------------------------------
+
+%% Returns a list of nodes that are currently tracing (not necessarily running).
+%% In the non-distributed case the status of the runtime component will be
+%% returned.
+%% Note that nodes showing trace_failure will be included since we like to stop
+%% tracing at those nodes too.
+get_tracing_nodes([{Node,{up,{tracing,_}}}|Rest]) ->
+    [Node|get_tracing_nodes(Rest)];
+get_tracing_nodes([{Node,{up,{trace_failure,_}}}|Rest]) ->
+    [Node|get_tracing_nodes(Rest)];
+get_tracing_nodes([{Node,{up,reactivating}}|Rest]) ->
+    [Node|get_tracing_nodes(Rest)];
+get_tracing_nodes([_|Rest]) ->
+    get_tracing_nodes(Rest);
+get_tracing_nodes([]) ->
+    [];
+get_tracing_nodes(AvailableStatus) ->
+    AvailableStatus.
+%% -----------------------------------------------------------------------------
+
+%% Returns a list of all nodes that are currently up.
+get_available_nodes(down) ->
+    undefined;
+get_available_nodes([{_Node,down}|Rest]) ->
+    get_available_nodes(Rest);
+get_available_nodes([{Node,_}|Rest]) ->
+    [Node|get_available_nodes(Rest)];
+get_available_nodes([]) ->
+    [].
+%% -----------------------------------------------------------------------------
+
+%% Function returning the "state" of Node. Mainly used to check if the node is
+%% suspended or not.
+%% Returns {State,Status} | reactivating | down
+%% where 
 get_state_nodes(Node,NodesD) when is_list(NodesD) ->
-    case lists:keysearch(Node,1,NodesD) of
-	{value,{_,AvailableStatus}} ->
-	    get_state_nodes_2(AvailableStatus);
-	false ->
-	    false
-    end;
-get_state_nodes(_,NodesD) ->                % Non distributed case.
-    get_state_nodes_2(NodesD).
-
-get_state_nodes_2({up,{trace_failure,Status}}) ->
-    {trace_failure,Status};
-get_state_nodes_2({up,{State,suspended}}) -> % {tracing|inactive,suspended}
-    {State,suspended};
-get_state_nodes_2({up,reactivating}) ->
-    reactivating;
-get_state_nodes_2({up,{State,running}}) ->
-    {State,running};
-get_state_nodes_2(down) ->
-    down.
-%% -----------------------------------------------------------------------------
-
-%% Help function in the case we need to consult the state/status of a runtime
-%% component. Returns a nodesD value that can be added to the nodes database.
-mk_nodes_state_from_status({ok,{tracing,running}}) ->
-    {up,{tracing,running}};
-mk_nodes_state_from_status({ok,{tracing,{suspended,_SReason}}}) ->
-    {up,{tracing,suspended}};
-mk_nodes_state_from_status({ok,{_,running}}) ->
-    {up,{inactive,running}};
-mk_nodes_state_from_status({ok,{_,{suspended,_SReason}}}) ->
-    {up,{inactive,suspended}};
-mk_nodes_state_from_status({error,_Reason}) ->
-    down.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% The session_state.
-%% -----------------------------------------------------------------------------
-
-%% The session state reflects if the inviso_tool is tracing or not.
-%% This means that if the tool is tracing a reconnected node can be made to
-%% restart_session.
-
-%% Returns the correct value indicating that we are tracing now.
-tracing_sessionstate() ->
-    tracing.
-%% -----------------------------------------------------------------------------
-
-%% Returns true or false depending on if we are tracing now or not.
-is_tracing(tracing) ->
-    true;
-is_tracing(_) ->
-    false.
-%% -----------------------------------------------------------------------------
-
-%% Returns the correct value indicating that the tool is not tracing.
-passive_sessionstate() ->
-    idle.
-%% -----------------------------------------------------------------------------
-
-%% -----------------------------------------------------------------------------
-%% The tracer_data datastructure.
-%% -----------------------------------------------------------------------------
-
-%% The tracer_data structure collects the tracer data arguments used to init tracing
-%% by this inviso tool. The args are saved per session. Each session has
-%% a number.
-%% Implementation:
-%%     Sessions=[{SessionNr,TDGargs},...]
-%%     SessionNr=integer()
-%%     TDGargs=list(), args given to the tracer data generator
-%%       minus the first argument which is the Node name.
-
-%% Function taking tracerdata args structure inserting yet another session.
-%% Returns {SessionNr,NewTDs}.
-insert_td_tracer_data(TDGargs,TDs=[{SNr,_}|_]) ->
-    {SNr+1,[{SNr+1,TDGargs}|TDs]};
-insert_td_tracer_data(TDGargs,undefined) ->
-    {1,[{1,TDGargs}]}.
-%% -----------------------------------------------------------------------------
-
-%% Returns the latest session nr.
-get_latest_session_nr_tracer_data(undefined) ->
-    undefined;
-get_latest_session_nr_tracer_data([{SessionNr,_}|_]) ->
-    SessionNr.
-%% -----------------------------------------------------------------------------
-
-%% Returns the tracer data arguments used when creating the trace data for the
-%% latest session.
-get_latest_tdgargs_tracer_data(undefined) ->
-    undefined;
-get_latest_tdgargs_tracer_data([{_,TDGargs}|_]) ->
-    TDGargs.
-%% -----------------------------------------------------------------------------
-
-
-%% -----------------------------------------------------------------------------
-%% The tc_dict or trace case dictionary datastructure.
-%% -----------------------------------------------------------------------------
-
-%% The tc_dict stores information about all available trace cases.
-%% Implementation:
-%%   [{TCname,Type,VarNames,FNameOn [,FNameOff]},...]
-%%     TCname=atom()
-%%     Type=on | on_off
-%%     VarNames=[atom(),...]
-%%     FNameOn=FNameOff=string()
-
-%% Returns the empty trace case dictionary.
-mk_tc_dict() ->
-    [].
-%% -----------------------------------------------------------------------------
-
-%% Function inserting a new trace case into the trace case dictionary.
-insert_tracecase_tc_dict(TCname,on,VarNames,FNameOn,TCdict) ->
-    [{TCname,on,VarNames,FNameOn}|TCdict].
-insert_tracecase_tc_dict(TCname,on_off,VarNames,FNameOn,FNameOff,TCdict) ->
-    [{TCname,on_off,VarNames,FNameOn,FNameOff}|TCdict].
-%% -----------------------------------------------------------------------------
-
-%% Function finding a trace case definition in the tc_dict structure.
-%% Returns {ok,{TCname,Type,VarNAmes,FNameOn [,FNameOff]}} or 'false'.
-get_tracecase_tc_dict(TCname,[Tuple|_]) when element(1,Tuple)==TCname ->
-    {ok,Tuple};
-get_tracecase_tc_dict(TCname,[_|Rest]) ->
-    get_tracecase_tc_dict(TCname,Rest);
-get_tracecase_tc_dict(_,[]) ->
-    false;
-get_tracecase_tc_dict(_,_) ->               % There are no trace cases!
-    false.
-%% -----------------------------------------------------------------------------
-
-%% Function working on the trace case definition returned by get_tracecase_tc_dict/2
-%% function.
-%% Returning {ok,ActivationFileName}.
-get_tc_activate_fname({_TCname,_Type,_VarNames,FNameOn}) ->
-    {ok,FNameOn};
-get_tc_activate_fname({_TCname,_Type,_VarNames,FNameOn,_FNameOff}) ->
-    {ok,FNameOn}.
-
-get_tc_deactivate_fname({_TCname,_Type,_VarNames,_FNameOn,FNameOff}) ->
-    {ok,FNameOff};
-get_tc_deactivate_fname(_) ->               % Not a case with off function.
-    false.
-
-get_tc_varnames({_TCname,_Type,VarNames,_FNameOn}) ->
-    VarNames;
-get_tc_varnames({_TCname,_Type,VarNames,_FNameOn,_FNameOff}) ->
-    VarNames.
-
-%% -----------------------------------------------------------------------------
-
-
-%% The Command History Log (CHL) stores commands to make it possible to
-%% reactivate suspended nodes, reconnect restarted nodes, and to make
-%% autostart files.
-%% Each time tracing is initiated (that is started) the CHL is cleared since
-%% it would not make scense to repeat commands from an earlier tracing at
-%% reactivation for instance.
-
-%% Implementation: {NextCounter,OnGoingList,ETStable}
-%%   NextCounter=integer(), next command number - to be able to sort them in order.
-%%   OnGoingList=[{ProcH,{TCname,ID}},...]
-%%   ID=term(), instance id for this execution of this trace case.
-%%   ETStable=tid() -> {{TCname,Id},Counter,State1,Bindings}
-%%   ETStable=tid() -> {{TCname,Id},Counter,running,Bindings,Result} |
-%%                     {{TCname,Id,#Ref},Counter,stop,Bindings} |
-%%                     {{TCname,#Ref},Counter,Bindings} % An rtc
-%%                     {{M,F,Args,#Ref},Counter}
-%%     Counter=integer(), the order-counter for this logged entry.
-%%     State1=activating | stopping
-%%       Where:
-%%         activating: the activation file for the tracecase is running.
-%%         running   : activation is completed.
-%%         stopping  : set on the previously running ETS entry when deactivation
-%%                       file is currently executing.
-%%         stop      : entered with own Counter into the ETS table when
-%%                       deactivation file is executing. Remains after too.
-%%     Result=term(), the result returned from the tr-case or inviso call.
-
-
-%% Returning an initial empty CHL.
-mk_chl(undefined) ->
-    {1,[],ets:new(inviso_tool_chl,[set,protected])};
-mk_chl({_,_,TId}) ->
-    ets:delete(TId),
-    mk_chl(undefined).
-
-%% Help function returning 'true' if there is a current history.
-history_exists_chl(undefined) ->
-    false;
-history_exists_chl({_,_,_}) ->
-    true.
-
-%% Function looking up the state of this trace case.    
-find_id_chl(TCname,Id,{_NextCounter,_OnGoingList,TId}) ->
-    case ets:lookup(TId,{TCname,Id}) of
-	[{_,_,running,Bindings,_Result}] -> % The trace case is tracing.
-	    {ok,Bindings};
-	[{_,_,State,_}] ->                  % activating or stopping.
-	    State;
-	[] ->
-	    false
-    end.
-
-%% Function finding the Trace case associated with a process handle
-%% doing this trace case's activation or stopping.
-find_tc_executer_chl(ProcH,{_,OnGoingList,TId}) ->
-    case lists:keysearch(ProcH,1,OnGoingList) of
-	{value,{_,{TCname,Id}}} ->
-	    [{_,_,State,_}]=ets:lookup(TId,{TCname,Id}),
-	    {State,{TCname,Id}};            % Should be activating or stopping.
-	false ->
-	    false
-    end.
-
-%% Adds a Trace case to the CHL. This is done when it is turned on. Or when it
-%% is called for trace cases that do not have on/off functionality.
-set_activating_chl(TCname,Id,{Counter,OnGoingList,TId},Bindings,ProcH) ->
-    ets:insert(TId,{{TCname,Id},Counter,activating,Bindings}),
-    {Counter+1,[{ProcH,{TCname,Id}}|OnGoingList],TId}.
-
-%% Function marking a trace case as now running. That is the activation
-%% phase is completed. It is normaly completed when the process executing
-%% the trace case signals that it is done.
-set_running_chl(ProcH,TCname,Id,Result,{NextCounter,OnGoingList,TId}) ->
-    [{_,Counter,_,Bindings}]=ets:lookup(TId,{TCname,Id}),
-    ets:insert(TId,{{TCname,Id},Counter,running,Bindings,Result}),
-    NewOnGoingList=lists:keydelete(ProcH,1,OnGoingList),
-    {NextCounter,NewOnGoingList,TId}.
-
-%% Function marking trace case TCname with identifier Id as now in its stopping
-%% state. Where ProcH is the handler to the process running the stopping
-%% trace case.
-set_stopping_chl(TCname,Id,{NextCounter,OnGoingList,TId},ProcH)->
-    [{_,Counter,_,Bindings,_}]=ets:lookup(TId,{TCname,Id}),
-    ets:insert(TId,{{TCname,Id},Counter,stopping,Bindings}),
-    ets:insert(TId,{{TCname,Id,make_ref()},NextCounter,stop,Bindings}),
-    {NextCounter+1,[{ProcH,{TCname,Id}}|OnGoingList],TId}.
-
-%% Function removing a TCname-Id from the CHL. This is mostly used
-%% if activating the trace case failed for some reason. We do not then
-%% expect the user to stop the trace case. Hence it must be removed now.
-%% A reactivation process may have noticed the activating-entry and started
-%% to activate it. But since the general state reached after an unsuccessful
-%% activation can not easily be determined, we don't try to do much about it.
-del_tc_chl(ProcH,TCname,Id,{NextCounter,OnGoingList,TId}) ->
-   ets:delete(TId,{TCname,Id}),
-   NewOnGoingList=lists:keydelete(ProcH,1,OnGoingList),
-   {NextCounter,NewOnGoingList,TId}.
-
-%% Function removing the entry TCname+Id from the CHL. This makes it
-%% possible to activate a tracecase with this id again. The entry was
-%% previously marked as stopping.
-nullify_chl(ProcH,TCname,Id,{NextCounter,OnGoingList,TId}) ->
-    ets:delete(TId,{TCname,Id}),
-    NewOnGoingList=lists:keydelete(ProcH,1,OnGoingList),
-    {NextCounter+1,NewOnGoingList,TId}.
-
-%% Function stopping all processes saved as being now running tc executers.
-%% This is useful as cleanup during stop tracing for instance.
-%% Returns a new CHL which is not in all parts correct. Entries in the
-%% ETS table are for instance not properly state-changed. But the CHL will
-%% from now on only be used to create command files and similar.
-stop_all_tc_executer_chl({NextCounter,[{ProcH,_}|Rest],TId}) ->
-    exit(ProcH,kill),
-    stop_all_tc_executer_chl({NextCounter,Rest,TId});
-stop_all_tc_executer_chl({NextCounter,[],TId}) ->
-    {NextCounter,[],TId}.
-
-%% Function adding a "plain" inviso call to the CHL.
-add_inviso_call_chl(Cmd,Args,{NextCounter,OnGoingList,TId}) ->
-    ets:insert(TId,{{inviso,Cmd,Args,make_ref()},NextCounter}),
-    {NextCounter+1,OnGoingList,TId}.
-
-%% Function adding a run trace case entry to the chl.
-add_rtc_chl(TCname,Bindings,{NextCounter,OnGoingList,TId}) ->
-    ets:insert(TId,{{TCname,make_ref()},NextCounter,Bindings}),
-    {NextCounter+1,OnGoingList,TId}.
-%% Returns the highest used counter number in the command history log.
-get_highest_used_counter_chl({NextCounter,_,_}) ->    
-    NextCounter-1.
-
-%% Help function returning a list of {{TCname,Id},Phase} for all ongoing
-%% assynchronous tracecases.
-get_ongoing_chl(undefined) ->
-    [];
-get_ongoing_chl({_,OngoingList,TId}) ->
-    get_ongoing_chl_2(OngoingList,TId).
-
-get_ongoing_chl_2([{_ProcH,{TCname,Id}}|Rest],TId) ->
-    case ets:lookup(TId,{TCname,Id}) of
-	[{_,_C,activating,_B}] ->
-	    [{{TCname,Id},activating}|get_ongoing_chl_2(Rest,TId)];
-	[{_,_C,stopping,_B}] ->
-	    [{{TCname,Id},deactivating}|get_ongoing_chl_2(Rest,TId)]
-    end;
-get_ongoing_chl_2([],_) ->
-    [].
-
-%% Function returning a list of log entries. Note that the list is unsorted
-%% in respect to Counter.
-get_loglist_chl({_,_,TId}) ->
-    L=ets:tab2list(TId),
-    lists:map(fun({{TC,Id},C,S,B,_Result}) -> {{TC,Id},C,S,B}; % running
-		 (Tuple={{_TC,_Id},_C,_S,_B}) -> Tuple;      % activating | stopping
-		 (Tuple={{_TC,_Id,_Ref},_C,_S,_B}) -> Tuple; % stop
-		 (Tuple={{_M,_F,_Args,_Ref},_C}) -> Tuple;
-		 (Tuple={{_TC,_Ref},_C,_B}) -> Tuple
-	      end,
-	      L);
-get_loglist_chl(_) ->                       % The history is not initiated, ever!
-    [].
-
-%% Function returning a list of log entries, but only those which are not
-%% cancelled out by deactivations.
-% get_loglist_active_chl({_,_,TId}) ->
-%     L=ets:tab2list(TId),
-%     lists:zf(fun({{TC,Id},C,S,B,_Result}) -> {true,{{TC,Id},C,S,B}}; % running
-% 		(Tuple={{_TC,_Id},_C,_S,_B}) -> Tuple;      % activating | stopping
-% 		(Tuple={{_TC,_Id,_Ref},_C,_S,_B}) -> Tuple; % stop
-% 		(Tuple={{_M,_F,_Args,_Ref},_C}) -> Tuple
-% 	     end,
-% 	     L);
-% get_loglist_chl(_) ->                       % The history is not initiated, ever!
-%     [].
-
-
-%% This helpfunction recreates a history from a saved history list. This function
-%% is supposed to crash if the log is not well formatted. Note that we must restore
-%% the counter in order for the counter to work if new commands are added to the
-%% history.
-replace_history_chl(OldCHL,SortedLog) ->
-    {_,Ongoing,TId}=mk_chl(OldCHL),
-    {NewTId,Counter}=replace_history_chl_2(TId,SortedLog,0),
-    {ok,{Counter+1,Ongoing,NewTId}}.
-
-replace_history_chl_2(TId,[{{TC,Id},C,running,B}|Rest],_Counter) ->
-    ets:insert(TId,{{TC,Id},C,running,B,undefined}),
-    replace_history_chl_2(TId,Rest,C);
-replace_history_chl_2(TId,[{{M,F,Args},C}|Rest],_Counter) ->
-    ets:insert(TId,{{M,F,Args,make_ref()},C}),
-    replace_history_chl_2(TId,Rest,C);
-replace_history_chl_2(TId,[{TC,C,B}|Rest],_Counter) ->
-    ets:insert(TId,{{TC,make_ref()},C,B}),
-    replace_history_chl_2(TId,Rest,C);
-replace_history_chl_2(TId,[],Counter) ->
-    {TId,Counter}.
-%% -----------------------------------------------------------------------------
-
-
-%% -----------------------------------------------------------------------------
-%% Reactivators data structure.
-%% -----------------------------------------------------------------------------
-
-%% Function adding a new node-reactivatorpid pair to the reactivators structure.
-%% In this way we know which reactivators to remove if Node terminates, or when
-%% a node is fully updated when a reactivator is done.
-add_reactivators(Node,Pid,Reactivators) ->
-    [{Node,Pid}|Reactivators].
-
-%% Function removing a reactivator entry from the reactivators structure.
-del_reactivators(RPid,[{_Node,RPid}|Rest]) ->
-    Rest;
-del_reactivators(RPid,[Element|Rest]) ->
-    [Element|del_reactivators(RPid,Rest)];
-del_reactivators(_,[]) ->                   % This should not happend.
-    [].
-
-get_node_reactivators(RPid,Reactivators) ->
-    case lists:keysearch(RPid,2,Reactivators) of
-	{value,{Node,_}} ->
-	    Node;
-	false ->                            % This should not happend.
-	    false
-    end.
-
-%% Returns a list of list all nodes that are currently reactivating.
-get_all_nodes_reactivators([{Nodes,_Pid}|Rest]) ->
-    [Nodes|get_all_nodes_reactivators(Rest)];
-get_all_nodes_reactivators([]) ->
-    [].
-
-%% Function stopping all running reactivator processes. Returns a new empty
-%% reactivators structure. Note that this function does not set the state of
-%% Nodes. It must most often be set to running.
-stop_all_reactivators([{_Nodes,Pid}|Rest]) ->
-    exit(Pid,kill),
-    stop_all_reactivators(Rest);
-stop_all_reactivators([]) ->
-    [].                                     % Returns an empty reactivators.
-
-%% Help function stopping the reactivator (if any) that reactivates Node.
-%% Returns a new list of reactivators structure.
-stop_node_reactivators(Node,[{Node,Pid}|Rest]) ->
-    exit(Pid,kill),
-    Rest;
-stop_node_reactivators(Node,[NodePid|Rest]) ->
-    [NodePid|stop_node_reactivators(Node,Rest)];
-stop_node_reactivators(_,[]) ->
-    [].
-%% -----------------------------------------------------------------------------
-
-
-%% -----------------------------------------------------------------------------
-%% Started initial trace cases data structure.
-%% -----------------------------------------------------------------------------
-
-%% This datastructure keeps information about ongoing trace cases started
-%% automatically at init_tracing. These must be automatically stopped when calling
-%% stop_tracing.
-
-add_initial_tcs(TCname,Id,StartedInitialTcs) ->
-    [{TCname,Id}|StartedInitialTcs].
-%% -----------------------------------------------------------------------------
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+    case lists:keysearch(Node,1,NodesD) of
+	{value,{_,AvailableStatus}} ->
+	    get_state_nodes_2(AvailableStatus);
+	false ->
+	    false
+    end;
+get_state_nodes(_,NodesD) ->                % Non distributed case.
+    get_state_nodes_2(NodesD).
+
+get_state_nodes_2({up,{trace_failure,Status}}) ->
+    {trace_failure,Status};
+get_state_nodes_2({up,{State,suspended}}) -> % {tracing|inactive,suspended}
+    {State,suspended};
+get_state_nodes_2({up,reactivating}) ->
+    reactivating;
+get_state_nodes_2({up,{State,running}}) ->
+    {State,running};
+get_state_nodes_2(down) ->
+    down.
+%% -----------------------------------------------------------------------------
+
+%% Help function in the case we need to consult the state/status of a runtime
+%% component. Returns a nodesD value that can be added to the nodes database.
+mk_nodes_state_from_status({ok,{tracing,running}}) ->
+    {up,{tracing,running}};
+mk_nodes_state_from_status({ok,{tracing,{suspended,_SReason}}}) ->
+    {up,{tracing,suspended}};
+mk_nodes_state_from_status({ok,{_,running}}) ->
+    {up,{inactive,running}};
+mk_nodes_state_from_status({ok,{_,{suspended,_SReason}}}) ->
+    {up,{inactive,suspended}};
+mk_nodes_state_from_status({error,_Reason}) ->
+    down.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% The session_state.
+%% -----------------------------------------------------------------------------
+
+%% The session state reflects if the inviso_tool is tracing or not.
+%% This means that if the tool is tracing a reconnected node can be made to
+%% restart_session.
+
+%% Returns the correct value indicating that we are tracing now.
+tracing_sessionstate() ->
+    tracing.
+%% -----------------------------------------------------------------------------
+
+%% Returns true or false depending on if we are tracing now or not.
+is_tracing(tracing) ->
+    true;
+is_tracing(_) ->
+    false.
+%% -----------------------------------------------------------------------------
+
+%% Returns the correct value indicating that the tool is not tracing.
+passive_sessionstate() ->
+    idle.
+%% -----------------------------------------------------------------------------
+
+%% -----------------------------------------------------------------------------
+%% The tracer_data datastructure.
+%% -----------------------------------------------------------------------------
+
+%% The tracer_data structure collects the tracer data arguments used to init tracing
+%% by this inviso tool. The args are saved per session. Each session has
+%% a number.
+%% Implementation:
+%%     Sessions=[{SessionNr,TDGargs},...]
+%%     SessionNr=integer()
+%%     TDGargs=list(), args given to the tracer data generator
+%%       minus the first argument which is the Node name.
+
+%% Function taking tracerdata args structure inserting yet another session.
+%% Returns {SessionNr,NewTDs}.
+insert_td_tracer_data(TDGargs,TDs=[{SNr,_}|_]) ->
+    {SNr+1,[{SNr+1,TDGargs}|TDs]};
+insert_td_tracer_data(TDGargs,undefined) ->
+    {1,[{1,TDGargs}]}.
+%% -----------------------------------------------------------------------------
+
+%% Returns the latest session nr.
+get_latest_session_nr_tracer_data(undefined) ->
+    undefined;
+get_latest_session_nr_tracer_data([{SessionNr,_}|_]) ->
+    SessionNr.
+%% -----------------------------------------------------------------------------
+
+%% Returns the tracer data arguments used when creating the trace data for the
+%% latest session.
+get_latest_tdgargs_tracer_data(undefined) ->
+    undefined;
+get_latest_tdgargs_tracer_data([{_,TDGargs}|_]) ->
+    TDGargs.
+%% -----------------------------------------------------------------------------
+
+
+%% -----------------------------------------------------------------------------
+%% The tc_dict or trace case dictionary datastructure.
+%% -----------------------------------------------------------------------------
+
+%% The tc_dict stores information about all available trace cases.
+%% Implementation:
+%%   [{TCname,Type,VarNames,FNameOn [,FNameOff]},...]
+%%     TCname=atom()
+%%     Type=on | on_off
+%%     VarNames=[atom(),...]
+%%     FNameOn=FNameOff=string()
+
+%% Returns the empty trace case dictionary.
+mk_tc_dict() ->
+    [].
+%% -----------------------------------------------------------------------------
+
+%% Function inserting a new trace case into the trace case dictionary.
+insert_tracecase_tc_dict(TCname,on,VarNames,FNameOn,TCdict) ->
+    [{TCname,on,VarNames,FNameOn}|TCdict].
+insert_tracecase_tc_dict(TCname,on_off,VarNames,FNameOn,FNameOff,TCdict) ->
+    [{TCname,on_off,VarNames,FNameOn,FNameOff}|TCdict].
+%% -----------------------------------------------------------------------------
+
+%% Function finding a trace case definition in the tc_dict structure.
+%% Returns {ok,{TCname,Type,VarNAmes,FNameOn [,FNameOff]}} or 'false'.
+get_tracecase_tc_dict(TCname,[Tuple|_]) when element(1,Tuple)==TCname ->
+    {ok,Tuple};
+get_tracecase_tc_dict(TCname,[_|Rest]) ->
+    get_tracecase_tc_dict(TCname,Rest);
+get_tracecase_tc_dict(_,[]) ->
+    false;
+get_tracecase_tc_dict(_,_) ->               % There are no trace cases!
+    false.
+%% -----------------------------------------------------------------------------
+
+%% Function working on the trace case definition returned by get_tracecase_tc_dict/2
+%% function.
+%% Returning {ok,ActivationFileName}.
+get_tc_activate_fname({_TCname,_Type,_VarNames,FNameOn}) ->
+    {ok,FNameOn};
+get_tc_activate_fname({_TCname,_Type,_VarNames,FNameOn,_FNameOff}) ->
+    {ok,FNameOn}.
+
+get_tc_deactivate_fname({_TCname,_Type,_VarNames,_FNameOn,FNameOff}) ->
+    {ok,FNameOff};
+get_tc_deactivate_fname(_) ->               % Not a case with off function.
+    false.
+
+get_tc_varnames({_TCname,_Type,VarNames,_FNameOn}) ->
+    VarNames;
+get_tc_varnames({_TCname,_Type,VarNames,_FNameOn,_FNameOff}) ->
+    VarNames.
+
+%% -----------------------------------------------------------------------------
+
+
+%% The Command History Log (CHL) stores commands to make it possible to
+%% reactivate suspended nodes, reconnect restarted nodes, and to make
+%% autostart files.
+%% Each time tracing is initiated (that is started) the CHL is cleared since
+%% it would not make scense to repeat commands from an earlier tracing at
+%% reactivation for instance.
+
+%% Implementation: {NextCounter,OnGoingList,ETStable}
+%%   NextCounter=integer(), next command number - to be able to sort them in order.
+%%   OnGoingList=[{ProcH,{TCname,ID}},...]
+%%   ID=term(), instance id for this execution of this trace case.
+%%   ETStable=tid() -> {{TCname,Id},Counter,State1,Bindings}
+%%   ETStable=tid() -> {{TCname,Id},Counter,running,Bindings,Result} |
+%%                     {{TCname,Id,#Ref},Counter,stop,Bindings} |
+%%                     {{TCname,#Ref},Counter,Bindings} % An rtc
+%%                     {{M,F,Args,#Ref},Counter}
+%%     Counter=integer(), the order-counter for this logged entry.
+%%     State1=activating | stopping
+%%       Where:
+%%         activating: the activation file for the tracecase is running.
+%%         running   : activation is completed.
+%%         stopping  : set on the previously running ETS entry when deactivation
+%%                       file is currently executing.
+%%         stop      : entered with own Counter into the ETS table when
+%%                       deactivation file is executing. Remains after too.
+%%     Result=term(), the result returned from the tr-case or inviso call.
+
+
+%% Returning an initial empty CHL.
+mk_chl(undefined) ->
+    {1,[],ets:new(inviso_tool_chl,[set,protected])};
+mk_chl({_,_,TId}) ->
+    ets:delete(TId),
+    mk_chl(undefined).
+
+%% Help function returning 'true' if there is a current history.
+history_exists_chl(undefined) ->
+    false;
+history_exists_chl({_,_,_}) ->
+    true.
+
+%% Function looking up the state of this trace case.    
+find_id_chl(TCname,Id,{_NextCounter,_OnGoingList,TId}) ->
+    case ets:lookup(TId,{TCname,Id}) of
+	[{_,_,running,Bindings,_Result}] -> % The trace case is tracing.
+	    {ok,Bindings};
+	[{_,_,State,_}] ->                  % activating or stopping.
+	    State;
+	[] ->
+	    false
+    end.
+
+%% Function finding the Trace case associated with a process handle
+%% doing this trace case's activation or stopping.
+find_tc_executer_chl(ProcH,{_,OnGoingList,TId}) ->
+    case lists:keysearch(ProcH,1,OnGoingList) of
+	{value,{_,{TCname,Id}}} ->
+	    [{_,_,State,_}]=ets:lookup(TId,{TCname,Id}),
+	    {State,{TCname,Id}};            % Should be activating or stopping.
+	false ->
+	    false
+    end.
+
+%% Adds a Trace case to the CHL. This is done when it is turned on. Or when it
+%% is called for trace cases that do not have on/off functionality.
+set_activating_chl(TCname,Id,{Counter,OnGoingList,TId},Bindings,ProcH) ->
+    ets:insert(TId,{{TCname,Id},Counter,activating,Bindings}),
+    {Counter+1,[{ProcH,{TCname,Id}}|OnGoingList],TId}.
+
+%% Function marking a trace case as now running. That is the activation
+%% phase is completed. It is normaly completed when the process executing
+%% the trace case signals that it is done.
+set_running_chl(ProcH,TCname,Id,Result,{NextCounter,OnGoingList,TId}) ->
+    [{_,Counter,_,Bindings}]=ets:lookup(TId,{TCname,Id}),
+    ets:insert(TId,{{TCname,Id},Counter,running,Bindings,Result}),
+    NewOnGoingList=lists:keydelete(ProcH,1,OnGoingList),
+    {NextCounter,NewOnGoingList,TId}.
+
+%% Function marking trace case TCname with identifier Id as now in its stopping
+%% state. Where ProcH is the handler to the process running the stopping
+%% trace case.
+set_stopping_chl(TCname,Id,{NextCounter,OnGoingList,TId},ProcH)->
+    [{_,Counter,_,Bindings,_}]=ets:lookup(TId,{TCname,Id}),
+    ets:insert(TId,{{TCname,Id},Counter,stopping,Bindings}),
+    ets:insert(TId,{{TCname,Id,make_ref()},NextCounter,stop,Bindings}),
+    {NextCounter+1,[{ProcH,{TCname,Id}}|OnGoingList],TId}.
+
+%% Function removing a TCname-Id from the CHL. This is mostly used
+%% if activating the trace case failed for some reason. We do not then
+%% expect the user to stop the trace case. Hence it must be removed now.
+%% A reactivation process may have noticed the activating-entry and started
+%% to activate it. But since the general state reached after an unsuccessful
+%% activation can not easily be determined, we don't try to do much about it.
+del_tc_chl(ProcH,TCname,Id,{NextCounter,OnGoingList,TId}) ->
+   ets:delete(TId,{TCname,Id}),
+   NewOnGoingList=lists:keydelete(ProcH,1,OnGoingList),
+   {NextCounter,NewOnGoingList,TId}.
+
+%% Function removing the entry TCname+Id from the CHL. This makes it
+%% possible to activate a tracecase with this id again. The entry was
+%% previously marked as stopping.
+nullify_chl(ProcH,TCname,Id,{NextCounter,OnGoingList,TId}) ->
+    ets:delete(TId,{TCname,Id}),
+    NewOnGoingList=lists:keydelete(ProcH,1,OnGoingList),
+    {NextCounter+1,NewOnGoingList,TId}.
+
+%% Function stopping all processes saved as being now running tc executers.
+%% This is useful as cleanup during stop tracing for instance.
+%% Returns a new CHL which is not in all parts correct. Entries in the
+%% ETS table are for instance not properly state-changed. But the CHL will
+%% from now on only be used to create command files and similar.
+stop_all_tc_executer_chl({NextCounter,[{ProcH,_}|Rest],TId}) ->
+    exit(ProcH,kill),
+    stop_all_tc_executer_chl({NextCounter,Rest,TId});
+stop_all_tc_executer_chl({NextCounter,[],TId}) ->
+    {NextCounter,[],TId}.
+
+%% Function adding a "plain" inviso call to the CHL.
+add_inviso_call_chl(Cmd,Args,{NextCounter,OnGoingList,TId}) ->
+    ets:insert(TId,{{inviso,Cmd,Args,make_ref()},NextCounter}),
+    {NextCounter+1,OnGoingList,TId}.
+
+%% Function adding a run trace case entry to the chl.
+add_rtc_chl(TCname,Bindings,{NextCounter,OnGoingList,TId}) ->
+    ets:insert(TId,{{TCname,make_ref()},NextCounter,Bindings}),
+    {NextCounter+1,OnGoingList,TId}.
+%% Returns the highest used counter number in the command history log.
+get_highest_used_counter_chl({NextCounter,_,_}) ->    
+    NextCounter-1.
+
+%% Help function returning a list of {{TCname,Id},Phase} for all ongoing
+%% assynchronous tracecases.
+get_ongoing_chl(undefined) ->
+    [];
+get_ongoing_chl({_,OngoingList,TId}) ->
+    get_ongoing_chl_2(OngoingList,TId).
+
+get_ongoing_chl_2([{_ProcH,{TCname,Id}}|Rest],TId) ->
+    case ets:lookup(TId,{TCname,Id}) of
+	[{_,_C,activating,_B}] ->
+	    [{{TCname,Id},activating}|get_ongoing_chl_2(Rest,TId)];
+	[{_,_C,stopping,_B}] ->
+	    [{{TCname,Id},deactivating}|get_ongoing_chl_2(Rest,TId)]
+    end;
+get_ongoing_chl_2([],_) ->
+    [].
+
+%% Function returning a list of log entries. Note that the list is unsorted
+%% in respect to Counter.
+get_loglist_chl({_,_,TId}) ->
+    L=ets:tab2list(TId),
+    lists:map(fun({{TC,Id},C,S,B,_Result}) -> {{TC,Id},C,S,B}; % running
+		 (Tuple={{_TC,_Id},_C,_S,_B}) -> Tuple;      % activating | stopping
+		 (Tuple={{_TC,_Id,_Ref},_C,_S,_B}) -> Tuple; % stop
+		 (Tuple={{_M,_F,_Args,_Ref},_C}) -> Tuple;
+		 (Tuple={{_TC,_Ref},_C,_B}) -> Tuple
+	      end,
+	      L);
+get_loglist_chl(_) ->                       % The history is not initiated, ever!
+    [].
+
+%% Function returning a list of log entries, but only those which are not
+%% cancelled out by deactivations.
+% get_loglist_active_chl({_,_,TId}) ->
+%     L=ets:tab2list(TId),
+%     lists:zf(fun({{TC,Id},C,S,B,_Result}) -> {true,{{TC,Id},C,S,B}}; % running
+% 		(Tuple={{_TC,_Id},_C,_S,_B}) -> Tuple;      % activating | stopping
+% 		(Tuple={{_TC,_Id,_Ref},_C,_S,_B}) -> Tuple; % stop
+% 		(Tuple={{_M,_F,_Args,_Ref},_C}) -> Tuple
+% 	     end,
+% 	     L);
+% get_loglist_chl(_) ->                       % The history is not initiated, ever!
+%     [].
+
+
+%% This helpfunction recreates a history from a saved history list. This function
+%% is supposed to crash if the log is not well formatted. Note that we must restore
+%% the counter in order for the counter to work if new commands are added to the
+%% history.
+replace_history_chl(OldCHL,SortedLog) ->
+    {_,Ongoing,TId}=mk_chl(OldCHL),
+    {NewTId,Counter}=replace_history_chl_2(TId,SortedLog,0),
+    {ok,{Counter+1,Ongoing,NewTId}}.
+
+replace_history_chl_2(TId,[{{TC,Id},C,running,B}|Rest],_Counter) ->
+    ets:insert(TId,{{TC,Id},C,running,B,undefined}),
+    replace_history_chl_2(TId,Rest,C);
+replace_history_chl_2(TId,[{{M,F,Args},C}|Rest],_Counter) ->
+    ets:insert(TId,{{M,F,Args,make_ref()},C}),
+    replace_history_chl_2(TId,Rest,C);
+replace_history_chl_2(TId,[{TC,C,B}|Rest],_Counter) ->
+    ets:insert(TId,{{TC,make_ref()},C,B}),
+    replace_history_chl_2(TId,Rest,C);
+replace_history_chl_2(TId,[],Counter) ->
+    {TId,Counter}.
+%% -----------------------------------------------------------------------------
+
+
+%% -----------------------------------------------------------------------------
+%% Reactivators data structure.
+%% -----------------------------------------------------------------------------
+
+%% Function adding a new node-reactivatorpid pair to the reactivators structure.
+%% In this way we know which reactivators to remove if Node terminates, or when
+%% a node is fully updated when a reactivator is done.
+add_reactivators(Node,Pid,Reactivators) ->
+    [{Node,Pid}|Reactivators].
+
+%% Function removing a reactivator entry from the reactivators structure.
+del_reactivators(RPid,[{_Node,RPid}|Rest]) ->
+    Rest;
+del_reactivators(RPid,[Element|Rest]) ->
+    [Element|del_reactivators(RPid,Rest)];
+del_reactivators(_,[]) ->                   % This should not happend.
+    [].
+
+get_node_reactivators(RPid,Reactivators) ->
+    case lists:keysearch(RPid,2,Reactivators) of
+	{value,{Node,_}} ->
+	    Node;
+	false ->                            % This should not happend.
+	    false
+    end.
+
+%% Returns a list of list all nodes that are currently reactivating.
+get_all_nodes_reactivators([{Nodes,_Pid}|Rest]) ->
+    [Nodes|get_all_nodes_reactivators(Rest)];
+get_all_nodes_reactivators([]) ->
+    [].
+
+%% Function stopping all running reactivator processes. Returns a new empty
+%% reactivators structure. Note that this function does not set the state of
+%% Nodes. It must most often be set to running.
+stop_all_reactivators([{_Nodes,Pid}|Rest]) ->
+    exit(Pid,kill),
+    stop_all_reactivators(Rest);
+stop_all_reactivators([]) ->
+    [].                                     % Returns an empty reactivators.
+
+%% Help function stopping the reactivator (if any) that reactivates Node.
+%% Returns a new list of reactivators structure.
+stop_node_reactivators(Node,[{Node,Pid}|Rest]) ->
+    exit(Pid,kill),
+    Rest;
+stop_node_reactivators(Node,[NodePid|Rest]) ->
+    [NodePid|stop_node_reactivators(Node,Rest)];
+stop_node_reactivators(_,[]) ->
+    [].
+%% -----------------------------------------------------------------------------
+
+
+%% -----------------------------------------------------------------------------
+%% Started initial trace cases data structure.
+%% -----------------------------------------------------------------------------
+
+%% This datastructure keeps information about ongoing trace cases started
+%% automatically at init_tracing. These must be automatically stopped when calling
+%% stop_tracing.
+
+add_initial_tcs(TCname,Id,StartedInitialTcs) ->
+    [{TCname,Id}|StartedInitialTcs].
+%% -----------------------------------------------------------------------------
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
diff --git a/lib/inviso/src/inviso_tool_sh.erl b/lib/inviso/src/inviso_tool_sh.erl
index fe876b955a..b02f498c5b 100644
--- a/lib/inviso/src/inviso_tool_sh.erl
+++ b/lib/inviso/src/inviso_tool_sh.erl
@@ -1,1731 +1,1749 @@
-%%%------------------------------------------------------------------------------
-%%% File    : inviso_tool_sh.erl
-%%% Author  : Lennart �hman <[email protected]>
-%%% Description : 
-%%%
-%%% Created : 24 Oct 2005 by Lennart �hman
-%%%------------------------------------------------------------------------------
--module(inviso_tool_sh).
-
-%% Inviso Session Handler.
-%% This is the code for the session handler process. Its purpose is that we have
-%% one session handler process for each trace session started through the
-%% start_session inviso tool API. The session handler process is responsible for:
-%%
-%% -Knowing the state/status of all participating runtime components.
-%% -Keeping storage of all tracerdata all our participants have used. This means
-%%  also to find out the tracerdata of runtime components connecting by them
-%%  selves.
-%%
-%% STORAGE STRATEGY
-%% ----------------
-%% The local information storage can be changed by two things. Either by executing
-%% commands issued through our APIs. Or by receiving trace_event from the control
-%% component. When we execute commands, a corresponding event will also follow.
-%% Meaning that in those situations we are informed twice.
-%% A simple strategy could be to wait for the event even when doing the changes
-%% to the runtime components our self (through commands). But that may result in
-%% a small time frame where someone might do yet another command and failing
-%% because the local information storage is not uptodate as it would have been
-%% expected to be. Therefore we always update the local storage when making changes
-%% to a runtime component our selves. There will eventually be a double update
-%% through an incoming event. But the storage must coop with that, preventing
-%% inconsitancies to happend. An example of a strategy is that the tracerdata table
-%% is a bag, not allowing for double entries of the same kind. Therefore a double
-%% update is harmless there.
-
-%% ------------------------------------------------------------------------------
-%% Module wide constants.
-%% ------------------------------------------------------------------------------
--define(LOCAL_RUNTIME,local_runtime).        % Used as node name when non-disitrbuted.
--define(TRACING,tracing).                    % A state defined by the control component.
--define(RUNNING,running).                    % A status according to control componet.
-
--define(COPY_LOG_FROM,copy_log_from).        % Common fileystem option.
-%% ------------------------------------------------------------------------------
-
-%% ------------------------------------------------------------------------------
-%% API exports.
-%% ------------------------------------------------------------------------------
--export([start_link/5,start_link/8]).
--export([cancel_session/1,stop_session/3]).
--export([reactivate/1,reactivate/2]).
--export([tpl/5,tpl/6,tpl/7,
-	 tf/2,tf/3,
-	 tpm_localnames/2,init_tpm/6,init_tpm/9,tpm/6,tpm/7,tpm/10,
-	 tpm_ms/7,ctpm_ms/6,ctpm/5
-	]).
-%% ------------------------------------------------------------------------------
-
-
-%% ------------------------------------------------------------------------------
-%% Internal exports.
-%% ------------------------------------------------------------------------------
--export([init/1,handle_call/3,handle_info/2,terminate/2]).
-
--export([get_loopdata/1]).
-%% ------------------------------------------------------------------------------
-
-
-%% ------------------------------------------------------------------------------
-%% Includes.
-%% ------------------------------------------------------------------------------
--include_lib("kernel/include/file.hrl").     % Necessary for file module.
-%% ------------------------------------------------------------------------------
-
-
-%% ==============================================================================
-%% Exported API functions.
-%% ==============================================================================
-
-%% start_link(From,NodeParams,CtrlNode,CtrlPid,SafetyCatches,NodesIn,NodesNotIn) =
-%%     {ok,Pid} | {error,Reason}
-%%   From= pid(), the initial client expecting the reply.
-%%   NodeParams=[{Node,TracerData},{Node,TracerData,Opts}...]
-%%   CtrlNode=atom() | 'void', the node where the trace control component is.
-%%   CtrlPid=pid(), the pid of the trace control component.
-%%   SafetyCatches=
-%%   Dir=string(), where to place fetched logs and the merged log.
-%%   Dbg=debug structure.
-%%   NodesIn=[Node,...], list of nodes already in another session.
-%%   NodesNotIn=[Node,...], list of nodes not in another session.
-%%
-%% Starts a session-handler. It keeps track of the the state and status of all
-%% participating runtime components. Note that there is a non-distributed case too.
-%% In the non-distributed case there is no things such as CtrlNode.
-start_link(From,TracerData,CtrlPid,SafetyCatches,Dbg) ->
-    gen_server:start_link(?MODULE,
-			  {self(),From,TracerData,CtrlPid,SafetyCatches,Dbg},
-			  []).
-
-start_link(From,NodeParams,CtrlNode,CtrlPid,SafetyCatches,Dbg,NodesIn,NodesNotIn) ->
-    gen_server:start_link(?MODULE,
-			  {self(),From,NodeParams,CtrlNode,CtrlPid,
-			   SafetyCatches,Dbg,NodesIn,NodesNotIn},
-			  []).
-%% ------------------------------------------------------------------------------
-
-%% Stops tracing where it is ongoing. Fetches all logfiles.
-stop_session(SID,Dir,Prefix) ->
-    gen_server:call(SID,{stop_session,Dir,Prefix}).
-%% ------------------------------------------------------------------------------
-
-%% stop_session(SID) = ok
-%%
-%% Cancels the session brutaly. All runtime components are made to stop tracing,
-%% all local log files are removed using the tracerdata we know for them.
-cancel_session(SID) ->
-    gen_server:call(SID,cancel_session).
-%% ------------------------------------------------------------------------------
-
-%% reactivate(SID) = {ok,
-%% reactivate(SID,Nodes) = {ok,NodeResults} | {error,Reason}.
-%%   SID=session id, pid().
-%%   Nodes=[Node,...]
-%%   NodeResult=[{Node,Result},...]
-%%   Result={Good,Bad}
-%%   Good,Bad=integer(), the number of redone activities.
-%%
-%% Function which reactivates runtime components being suspended. This is done
-%% replaying all trace flags (in the correct order) to the corresponding nodes.
-%% Note that this may also mean turning flags off. Like first turning them on
-%% then off a split second later.
-reactivate(SID) ->
-    gen_server:call(SID,reactivate). %% NOT IMPLEMENTED YET.
-reactivate(SID,Nodes) ->
-    gen_server:call(SID,{reactivate,Nodes}).
-%% ------------------------------------------------------------------------------
-
-
-%% tpl(SessionID,Mod,Func,Arity,MS)=
-%% tpl(SessionID,Mod,Func,Arity,MS,Opts)={ok,N}|{error,Reason}.
-%% tpl(SessionID,Nodes,Mod,Func,Arity,MS)=
-%% tpl(SessionID,Nodes,Mod,Func,Arity,MS,Opts)={ok,Result}|{error,Reason}
-%%   Mod='_' | ModuleName | ModRegExp | {DirRegExp,ModRegExp}
-%%     ModRegExp=DirRegExp= string()
-%%   Func='_' | FunctionName
-%%   Arity='_' | integer()
-%%   MS=[] | false | a match specification
-%%   Opts=[Opts,...]
-%%     Opt={arg,Arg}, disable_safety, {expand_regexp_at,NodeName}, only_loaded
-%%   Nodes=[NodeName,...]
-tpl(SID,Mod,Func,Arity,MS) ->
-    gen_server:call(SID,{tp,tpl,Mod,Func,Arity,MS,[]}).
-tpl(SID,Mod,Func,Arity,MS,Opts) when list(MS);MS==true;MS==false ->
-    gen_server:call(SID,{tp,tpl,Mod,Func,Arity,MS,Opts});
-tpl(SID,Nodes,Mod,Func,Arity,MS) when integer(Arity);Arity=='_' ->
-    gen_server:call(SID,{tp,tpl,Nodes,Mod,Func,Arity,MS,[]}).
-tpl(SID,Nodes,Mod,Func,Arity,MS,Opts) ->
-    gen_server:call(SID,{tp,tpl,Nodes,Mod,Func,Arity,MS,Opts}).
-%% ------------------------------------------------------------------------------
-
-%% ctpl(SessionID,Nodes,Mod,Func,Arity)=
-%% See tpl/X for arguments.
-%%
-%% Removes local trace-patterns from functions.
-ctpl(SID,Nodes,Mod,Func,Arity) ->
-    gen_server:call(SID,{ctp,ctpl,Nodes,Mod,Func,Arity}).
-%% ------------------------------------------------------------------------------
-
-
-tpm_localnames(SID,Nodes) ->
-    gen_server:call(SID,{tpm_localnames,Nodes}).
-tpm_globalnames(SID,Nodes) ->
-    gen_server:call(SID,{tpm_globalnames,Nodes}).
-
-init_tpm(SID,Nodes,Mod,Func,Arity,CallFunc) ->
-    gen_server:call(SID,{init_tpm,Nodes,Mod,Func,Arity,CallFunc}).
-init_tpm(SID,Nodes,Mod,Func,Arity,InitFunc,CallFunc,ReturnFunc,RemoveFunc) ->
-    gen_server:call(SID,
-		    {init_tpm,Nodes,Mod,Func,Arity,InitFunc,CallFunc,ReturnFunc,RemoveFunc}).
-tpm(SID,Nodes,Mod,Func,Arity,MS) ->
-    gen_server:call(SID,{tpm,Nodes,Mod,Func,Arity,MS}).
-tpm(SID,Nodes,Mod,Func,Arity,MS,CallFunc) ->
-    gen_server:call(SID,{tpm,Nodes,Mod,Func,Arity,MS,CallFunc}).
-tpm(SID,Nodes,Mod,Func,Arity,MS,InitFunc,CallFunc,ReturnFunc,RemoveFunc) ->
-    gen_server:call(SID,{tpm,Nodes,Mod,Func,Arity,MS,InitFunc,CallFunc,ReturnFunc,RemoveFunc}).
-
-tpm_ms(SID,Nodes,Mod,Func,Arity,MSname,MS) ->
-    gen_server:call(SID,{tpm_ms,Nodes,Mod,Func,Arity,MSname,MS}).
-
-ctpm_ms(SID,Nodes,Mod,Func,Arity,MSname) ->
-    gen_server:call(SID,{tpm_ms,Nodes,Mod,Func,Arity,MSname}).
-
-ctpm(SID,Nodes,Mod,Func,Arity) ->
-    gen_server:call(SID,{ctpm,Nodes,Mod,Func,Arity}).
-%% ------------------------------------------------------------------------------
-
-
-%% tf(SessionID,Nodes,TraceConfList)=
-%%   TraceConfList=[{PidSpec,Flags},...]
-%%     PidSpec=pid()|atom()|all|new|existing
-%%     Flags=[Flag,...]
-tf(SID,TraceConfList) ->
-    gen_server:call(SID,{tf,TraceConfList}).
-tf(SID,Nodes,TraceConfList) ->
-    gen_server:call(SID,{tf,Nodes,TraceConfList}).
-%% ------------------------------------------------------------------------------
-
-
-get_loopdata(SID) ->
-    gen_server:call(SID,get_loopdata).
-%% ------------------------------------------------------------------------------
-
-%% ==============================================================================
-%% Genserver call-backs.
-%% ==============================================================================
-
-%% Initial function for the session handler process. The nodes participating in
-%% the session must previously have been added to our control component by the tool.
-%% The session handler first finds out the state/status of the specified runtime
-%% components, then it tries to initiate tracing on those where it is applicable.
-%% Note that a reply to the initial (tool)client is done from here instead from
-%% the tool-server.
-init({Parent,From,TracerData,CtrlPid,SafetyCatches,Dbg}) -> % The non-distributed case.
-    {ok,StateStatus}=init_rtcomponent_states([],void,CtrlPid,[?LOCAL_RUNTIME]),
-    case is_tool_internal_tracerdata(TracerData) of
-	false ->                             % We shall initiate local runtime.
-	    case inviso:init_tracing(TracerData) of
-		ok ->
-		    gen_server:reply(From,{ok,{self(),ok}}),
-		    {ok,mk_ld(Parent,
-			      void,
-			      CtrlPid,
-			      to_rtstates([{?LOCAL_RUNTIME,{tracing,?RUNNING},[]}]),
-			      [{?LOCAL_RUNTIME,TracerData}],
-			      [],
-			      SafetyCatches,
-			      Dbg)};
-		{error,Reason} ->            % It might have become suspended?!
-		    gen_server:reply(From,{error,Reason}),
-		    {ok,mk_ld(Parent,
-			      void,
-			      CtrlPid,
-			      to_rtstates([{?LOCAL_RUNTIME,StateStatus,[]}]),
-			      [{?LOCAL_RUNTIME,TracerData}],
-			      [],
-			      SafetyCatches,
-			      Dbg)}
-	    end;
-	true ->                              % We shall not pass this one on.
-	    gen_server:reply(From,{ok,{self(),ok}}), % Then it is ok.
-	    {ok,mk_ld(Parent,
-		      void,
-		      CtrlPid,
-		      to_rtstates([{?LOCAL_RUNTIME,StateStatus,[]}]),
-		      [],
-		      [?LOCAL_RUNTIME],
-		      SafetyCatches,
-		      Dbg)}
-    end;
-init({Parent,From,NodeParams,CtrlNode,CtrlPid,SafetyCatches,Dbg,NodesIn,NodesNotIn}) ->
-    case init_rtcomponent_states(NodeParams,CtrlNode,CtrlPid,NodesNotIn) of
-	{ok,States} ->                       % A list of {Node,{State,Status},Opts}.
-	    {NodeParams2,Nodes2}=remove_nodeparams(NodesIn,NodeParams),
-	    case inviso_tool_lib:inviso_cmd(CtrlNode,init_tracing,[NodeParams2]) of
-		{ok,Result} ->               % Resulted in state changes!
-		    RTStates=set_tracing_rtstates(to_rtstates(States),Result),
-		    ReplyValue=init_fix_resultnodes(NodesIn,Nodes2,Result),
-		    gen_server:reply(From,{ok,{self(),ReplyValue}}),
-		    {ok,mk_ld(Parent,CtrlNode,CtrlPid,RTStates,
-			      NodeParams2,Nodes2,SafetyCatches,Dbg)};
-		{error,Reason} ->            % Some general failure.
-		    inviso_tool_lib:inviso_cmd(CtrlNode,unsubscribe,[]),
-		    gen_server:reply(From,{error,{init_tracing,Reason}}),
-		    {stop,{init_tracing,Reason}};
-		What ->
-		    io:format("GOT:~n~w~n",[What]),
-		    exit(foo)
-	    end;
-	{error,Reason} ->                    % Unable to get the state/status.
-	    inviso_tool_lib:inviso_cmd(CtrlNode,unsubscribe,[]),
-	    gen_server:reply(From,{error,Reason}),
-	    {stop,{error,Reason}};
-	What ->
-	    io:format("GOT:~n~w~n",[What]),
-	    exit(foo)
-    end.
-%% ------------------------------------------------------------------------------
-
-%% To stop a session means stop the tracing and remove all local files on the
-%% runtime nodes. We do have a table with all tracer data and that is how we are
-%% going to recreate what files to remove.
-%% Since runtime components may actually change state when this procedure is
-%% on-going, we do not care! It is the state in the session handling process at
-%% the time of start of this procedure which is used.
-handle_call(cancel_session,_From,LD) ->
-    CtrlNode=get_ctrlnode_ld(LD),
-    RTStates=get_rtstates_ld(LD),
-    Dbg=get_dbg_ld(LD),
-    TracingNodes=get_all_tracing_nodes_rtstates(RTStates),
-    case stop_all_tracing(CtrlNode,Dbg,TracingNodes) of
-	ok->                                 % Hopefully all nodes are stopped now.
-	    AvailableNodes=get_all_available_nodes_rtstates(RTStates),
-	    TRDstorage=get_trdstorage_ld(LD),
-	    remove_all_local_logs(CtrlNode,TRDstorage,AvailableNodes,Dbg),
-	    {stop,normal,ok,LD};             % LD actually not correct now!
-	{error,Reason} ->                    % Some serious error when stop_tracing.
-	    {stop,normal,{error,Reason},LD}
-    end;
-%% ------------------------------------------------------------------------------
-
-%% *Stop all tracing on runtime components still tracing.
-%% *Copy all local log files to the collection directory.
-handle_call({stop_session,Dir,Prefix},_From,LD) ->
-    case check_directory_exists(Dir) of      % Check that this directory exists here.
-	true ->
-	    RTStates=get_rtstates_ld(LD),
-	    CtrlNode=get_ctrlnode_ld(LD),
-	    Dbg=get_dbg_ld(LD),
-	    TracingNodes=get_all_tracing_nodes_rtstates(RTStates),
-	    case stop_all_tracing(CtrlNode,Dbg,TracingNodes) of
-		ok ->                        % Hopefully no node is still tracing now.
-		    TRDstorage=get_trdstorage_ld(LD),
-		    AvailableNodes=get_all_available_nodes_rtstates(RTStates),
-		    {FailedNodes,FetchedFiles}=
-			transfer_logfiles(RTStates,CtrlNode,Dir,Prefix,
-					  TRDstorage,Dbg,AvailableNodes),
-		    RemoveNodes=             % We only delete local logs where fetch ok.
-			lists:filter(fun(N)->
-					     case lists:keysearch(N,1,FailedNodes) of
-						 {value,_} ->
-						     false;
-						 false ->
-						     true
-					     end
-				     end,
-				     AvailableNodes),
-		    remove_all_local_logs(CtrlNode,TRDstorage,RemoveNodes,Dbg),
-		    {stop,normal,{ok,{FailedNodes,FetchedFiles}},LD};
-		{error,Reason} ->            % Some general failure, quit.
-		    {stop,normal,{error,Reason},LD}
-	    end;
-	false ->                             % You specified a non-existing directory!
-	    {reply,{error,{faulty_dir,Dir}},LD}
-    end;
-%% ------------------------------------------------------------------------------
-
-handle_call({reactivate,Nodes},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    {OurNodes,OtherNodes}=
-	remove_nodes_not_ours(Nodes,get_all_session_nodes_rtstates(RTStates)),
-    CtrlNode=get_ctrlnode_ld(LD),
-    ACTstorage=get_actstorage_ld(LD),
-    case h_reactivate(CtrlNode,OurNodes,ACTstorage) of
-	{ok,Results} ->                      % A list of {Node,Result}.
-	    if
-		OtherNodes==[] ->            % Normal case, no non-session nodes.
-		    {reply,{ok,Results},LD};
-		true ->                      % Add error values for non-session nodes.
-		    {reply,
-		     {ok,
-		      lists:map(fun(N)->{N,{error,not_in_session}} end,OtherNodes)++
-		      Results},
-		     LD}
-	    end;
-	{error,Reason} ->                    % Then this error takes presidence.
-	    {reply,{error,Reason},LD}
-    end;
-%% ------------------------------------------------------------------------------
-
-%% Call-back for set trace-pattern for both global and local functions.
-handle_call({tp,PatternFunc,Mod,F,A,MS,Opts},_From,LD) ->
-    Reply=h_tp(all,PatternFunc,Mod,F,A,MS,Opts,LD), % For all active nodes in the session.
-    {reply,Reply,LD};
-handle_call({tp,PatternFunc,Nodes,Mod,F,A,MS,Opts},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    SNodes=get_all_session_nodes_rtstates(RTStates), % Notes belongoing to the session.
-    {Nodes2,FaultyNodes}=remove_nodes_not_ours(Nodes,SNodes),
-    Reply=h_tp(Nodes2,PatternFunc,Mod,F,A,MS,Opts,LD),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,FaultyNodes),
-    {reply,ErrorReply++Reply,LD};
-%% ------------------------------------------------------------------------------
-
-%% Call-back handling the removal of both local and global trace-patterns.
-%% NOT IMPLEMENTED YET.
-handle_call({ctp,PatternFunc,Nodes,Mod,F,A},_From,LD) ->
-    Reply=h_ctp(Nodes,PatternFunc,Mod,F,A,LD),
-    {reply,Reply,LD};
-%% ------------------------------------------------------------------------------
-
-handle_call({tpm_localnames,Nodes},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    OurNodes=get_all_session_nodes_rtstates(RTStates),
-    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
-    ACTstorage=get_actstorage_ld(LD),
-    {Reply,NewACTstorage}=
-	h_tpm_localnames(get_ctrlnode_ld(LD),Nodes2,RTStates,ACTstorage),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
-    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
-
-handle_call({init_tpm,Nodes,Mod,Func,Arity,CallFunc},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    OurNodes=get_all_session_nodes_rtstates(RTStates),
-    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
-    ACTstorage=get_actstorage_ld(LD),
-    {Reply,NewACTstorage}=
-	h_all_tpm(get_ctrlnode_ld(LD),
-		  Nodes2,
-		  init_tpm,
-		  [Mod,Func,Arity,CallFunc],
-		  RTStates,
-		  ACTstorage),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
-    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
-
-handle_call({init_tpm,Nodes,Mod,Func,Arity,InitFunc,CallFunc,ReturnFunc,RemoveFunc},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    OurNodes=get_all_session_nodes_rtstates(RTStates),
-    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
-    ACTstorage=get_actstorage_ld(LD),
-    {Reply,NewACTstorage}=
-	h_all_tpm(get_ctrlnode_ld(LD),
-		  Nodes2,
-		  init_tpm,
-		  [Mod,Func,Arity,InitFunc,CallFunc,ReturnFunc,RemoveFunc],
-		  RTStates,
-		  ACTstorage),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
-    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
-
-handle_call({tpm,Nodes,Mod,Func,Arity,MS},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    OurNodes=get_all_session_nodes_rtstates(RTStates),
-    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
-    ACTstorage=get_actstorage_ld(LD),
-    {Reply,NewACTstorage}=
-	h_all_tpm(get_ctrlnode_ld(LD),Nodes2,tpm,[Mod,Func,Arity,MS],RTStates,ACTstorage),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
-    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
-
-handle_call({tpm,Nodes,Mod,Func,Arity,MS,CallFunc},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    OurNodes=get_all_session_nodes_rtstates(RTStates),
-    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
-    ACTstorage=get_actstorage_ld(LD),
-    {Reply,NewACTstorage}=
-	h_all_tpm(get_ctrlnode_ld(LD),
-		  Nodes2,
-		  tpm,
-		  [Mod,Func,Arity,MS,CallFunc],
-		  RTStates,
-		  ACTstorage),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
-    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
-
-handle_call({tpm,Nodes,Mod,Func,Arity,MS,InitFunc,CallFunc,ReturnFunc,RemoveFunc},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    OurNodes=get_all_session_nodes_rtstates(RTStates),
-    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
-    ACTstorage=get_actstorage_ld(LD),
-    {Reply,NewACTstorage}=
-	h_all_tpm(get_ctrlnode_ld(LD),
-		  Nodes2,
-		  tpm,
-		  [Mod,Func,Arity,MS,InitFunc,CallFunc,ReturnFunc,RemoveFunc],
-		  RTStates,
-		  ACTstorage),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
-    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
-
-handle_call({tpm_ms,Nodes,Mod,Func,Arity,MSname,MS},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    OurNodes=get_all_session_nodes_rtstates(RTStates),
-    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
-    ACTstorage=get_actstorage_ld(LD),
-    {Reply,NewACTstorage}=
-	h_all_tpm(get_ctrlnode_ld(LD),
-		  Nodes2,
-		  tpm_ms,
-		  [Mod,Func,Arity,MSname,MS],
-		  RTStates,
-		  ACTstorage),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
-    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
-
-handle_call({ctpm_ms,Nodes,Mod,Func,Arity,MSname},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    OurNodes=get_all_session_nodes_rtstates(RTStates),
-    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
-    ACTstorage=get_actstorage_ld(LD),
-    {Reply,NewACTstorage}=
-	h_all_tpm(get_ctrlnode_ld(LD),
-		  Nodes2,
-		  ctpm_ms,
-		  [Mod,Func,Arity,MSname],
-		  RTStates,
-		  ACTstorage),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
-    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
-
-handle_call({ctpm,Nodes,Mod,Func,Arity},_From,LD) ->
-    RTStates=get_rtstates_ld(LD),
-    OurNodes=get_all_session_nodes_rtstates(RTStates),
-    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
-    ACTstorage=get_actstorage_ld(LD),
-    {Reply,NewACTstorage}=
-	h_all_tpm(get_ctrlnode_ld(LD),Nodes2,ctpm,[Mod,Func,Arity],RTStates,ACTstorage),
-    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
-    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
-%% ------------------------------------------------------------------------------
-
-%% Call-back for setting process trace-flags. Handles both distributed and non-
-%% distributed case.
-handle_call({tf,TraceConfList},From,LD) ->
-    handle_call({tf,all,TraceConfList},From,LD);
-handle_call({tf,Nodes,TraceConfList},_From,LD) ->
-    {Reply,NewACTstorage}=h_tf(get_ctrlnode_ld(LD),
-			      Nodes,
-			      TraceConfList,
-			      get_actstorage_ld(LD),
-			      get_rtstates_ld(LD)),
-    {reply,Reply,put_actstorage_ld(NewACTstorage,LD)};
-%% ------------------------------------------------------------------------------
-
-
-
-handle_call(get_loopdata,_From,LD) ->
-    io:format("The loopdata:~n~p~n",[LD]),
-    {reply,ok,LD}.
-%% ------------------------------------------------------------------------------
-
-
-%% Clause handling an incomming state-change event from the control component.
-%% Note that it does not have to be one of our nodes since it is not possible
-%% to subscribe to certain node-events.
-%% We may very well get state-change events for state-changes we are the source
-%% to our selves. Those state-changes are already incorporated into the RTStates.
-%% There is however no harm in doing them again since we know that this event
-%% message will reach us before a reply to a potentially following state-change
-%% request will reach us. Hence we will do all state-changes in the correct order,
-%% even if sometimes done twice.
-handle_info({trace_event,CtrlPid,_Time,{state_change,Node,{State,Status}}},LD) ->
-    case get_ctrlpid_ld(LD) of
-	CtrlPid ->                           % It is from our control component.
-	    case {State,Status} of
-		{?TRACING,?RUNNING} ->       % This is the only case when new tracerdata!
-		    NewTracerData=add_current_tracerdata_ld(get_ctrlnode_ld(LD),
-							    Node,
-							    get_rtstates_ld(LD),
-							    get_trdstorage_ld(LD)),
-		    NewRTStates=statechange_rtstates(Node,State,Status,get_rtstates_ld(LD)),
-		    {noreply,put_trdstorage_ld(NewTracerData,
-					       put_rtstates_ld(NewRTStates,LD))};
-		_ ->                         % In all other cases, just fix rtstates.
-		    NewRTStates=statechange_rtstates(Node,State,Status,get_rtstates_ld(LD)),
-		    {noreply,put_rtstates_ld(NewRTStates,LD)}
-	    end;
-	_ ->
-	    {noreply,LD}
-    end;
-%% If a new runtime component connects to our trace control component, and it is
-%% in our list of runtime components belonging to this session, we may update its
-%% state to now being present. Otherwise it does not belong to this session.
-%% Note that we avoid updating an already connected runtime component. This
-%% can happend if it connected by itself after we started the session handler,
-%% but before we managed to initiate tracing. Doing so or not will not result in
-%% any error in the long run, but during a short period of time we might be
-%% prevented from doing things with the runtime though it actually is tracing.
-handle_info({trace_event,CtrlPid,_Time,{connected,Node,{_Tag,{State,Status}}}},LD) ->
-    case get_ctrlpid_ld(LD) of
-	CtrlPid ->                           % It is from our control component.
-	    case get_statestatus_rtstates(Node,get_rtstates_ld(LD)) of
-		{ok,unavailable} ->          % This is the situation when we update!
-		    NewRTStates=statechange_rtstates(Node,State,Status,get_rtstates_ld(LD)),
-		    {noreply,put_rtstates_ld(NewRTStates,LD)};
-		_ ->                         % In all other cases, let it be.
-		    {noreply,LD}
-	    end;
-	_ ->                                 % Not from our control component.
-	    {noreply,LD}
-    end;
-%% If a runtime component disconnects we mark it as unavailable. We must also
-%% remove all saved trace-flags in order for them to not be accidently reactivated
-%% should the runtime component reconnect and then suspend.
-handle_info({trace_event,CtrlPid,_Time,{disconnected,Node,_}},LD) ->
-    case get_ctrlpid_ld(LD) of
-	CtrlPid ->                           % It is from our control component.
-	    NewRTStates=set_unavailable_rtstates(Node,get_rtstates_ld(LD)),
-	    NewACTstorage=del_node_actstorage(Node,get_actstorage_ld(LD)),
-	    {noreply,put_actstorage_ld(NewACTstorage,put_rtstates_ld(NewRTStates,LD))};
-	_ ->
-	    {noreply,LD}
-    end;
-handle_info(_,LD) ->
-    {noreply,LD}.
-%% ------------------------------------------------------------------------------
-
-%% In terminate we cancel our subscription to event from the trace control component.
-%% That should actually not be necessary, but lets do it the correct way!
-terminate(_,LD) ->
-    case get_ctrlnode_ld(LD) of
-	void ->                              % Non-distributed.
-	    inviso:unsubscribe();
-	Node ->
-	    inviso_tool_lib:inviso_cmd(Node,unsubscribe,[])
-    end.
-%% ------------------------------------------------------------------------------
-
-
-
-%% ==============================================================================
-%% First level help functions to call-backs.
-%% ==============================================================================
-
-%% ------------------------------------------------------------------------------
-%% Help functions to init.
-%% ------------------------------------------------------------------------------
-
-%% Help function which find out the state/status of the runtime components.
-%% Note that since we have just started subscribe to state changes we must
-%% check our inqueue to see that we have no waiting messages for the nodes
-%% we learned the state/status of. If there is a waiting message we don't
-%% know whether that was a state change received before or after the state
-%% check was done. We will then redo the state-check.
-%% Returns {ok,States} or {error,Reason}.
-%% Where States is [{Node,{State,Status},Opts},...].
-%% Note that {error,Reason} can not occur in the non-distributed case.
-init_rtcomponent_states(NodeParams,void,CtrlPid,Nodes) -> % The non-distributed case.
-    ok=inviso:subscribe(),
-    init_rtcomponent_states_2(NodeParams,void,CtrlPid,Nodes,[]);
-init_rtcomponent_states(NodeParams,CtrlNode,CtrlPid,Nodes) ->
-    ok=inviso_tool_lib:inviso_cmd(CtrlNode,subscribe,[]),
-    init_rtcomponent_states_2(NodeParams,CtrlNode,CtrlPid,Nodes,[]).
-
-init_rtcomponent_states_2(_,_,_,[],States) ->
-    {ok,States};
-init_rtcomponent_states_2(NodeParams,void,CtrlPid,_Nodes,States) ->
-    case inviso:get_status() of
-	{ok,StateStatus} ->                  % Got its state/status, now...
-	    {ProblemNodes,NewStates}=
-		init_rtcomponent_states_3(NodeParams,CtrlPid,[{?LOCAL_RUNTIME,{ok,StateStatus}}],
-					  [],States),
-	    init_rtcomponent_states_2(NodeParams,void,CtrlPid,ProblemNodes,NewStates);
-	{error,_Reason} ->                   % The runtime is not available!?
-	    {ok,[{?LOCAL_RUNTIME,unavailable,[]}]} % Create the return value immediately.
-    end;
-init_rtcomponent_states_2(NodeParams,CtrlNode,CtrlPid,Nodes,States) ->
-    case inviso_tool_lib:inviso_cmd(CtrlNode,get_status,[Nodes]) of
-	{ok,NodeResult} ->
-	    {ProblemNodes,NewStates}=
-		init_rtcomponent_states_3(NodeParams,CtrlPid,NodeResult,[],States),
-	    init_rtcomponent_states_2(NodeParams,CtrlNode,CtrlPid,ProblemNodes,NewStates);
-	{error,Reason} ->                    % Severe problem, abort the session.
-	    {error,{get_status,Reason}}
-    end.
-
-%% Traverses the list of returnvalues and checks that we do not have an event
-%% waiting in the message queue. If we do have, it is a problem. That node will
-%% be asked about its state again.
-%% Note that it is here we construct the RTStatesList.
-init_rtcomponent_states_3(NodeParams,CtrlPid,[{Node,{ok,{State,Status}}}|Rest],Problems,States) ->
-    receive
-	{trace_event,CtrlPid,_Time,{state_change,Node,_}} ->
-	    init_rtcomponent_states_3(NodeParams,CtrlPid,Rest,[Node|Problems],States)
-    after
-	0 ->                                 % Not in msg queue, then we're safe!
-	    RTState=case lists:keysearch(Node,1,NodeParams) of
-			{value,{_Node,_TracerData,Opts}} ->
-			    {Node,{State,Status},Opts};
-			_ ->                 % No option available, use [].
-			    {Node,{State,Status},[]}
-		    end,
-	    init_rtcomponent_states_3(NodeParams,CtrlPid,Rest,Problems,[RTState|States])
-    end;
-init_rtcomponent_states_3(NodeParams,CtrlPid,[{Node,{error,_Reason}}|Rest],Problems,States) ->
-    RTState=case lists:keysearch(Node,1,NodeParams) of
-			{value,{_Node,_TracerData,Opts}} ->
-			    {Node,unavailable,Opts};
-			_ ->                 % No option available, use [].
-			    {Node,unavailable,[]}
-		    end,
-    init_rtcomponent_states_3(NodeParams,CtrlPid,Rest,Problems,[RTState|States]);
-init_rtcomponent_states_3(_,_,[],Problems,States) ->
-    {Problems,States}.
-%% ------------------------------------------------------------------------------
-
-%% Help function removing nodes from NodeParams. The reason for this can either
-%% be that we are using a tool internal tracerdata that shall not be forwarded to
-%% the trace control component, or that the node is actually already part of
-%% another session.
-%% Returns {NewNodeParams,NodesWhichShallNotBeInitiated}.
-remove_nodeparams(Nodes,NodesParams) ->
-    remove_nodeparams_2(Nodes,NodesParams,[],[]).
-
-remove_nodeparams_2(Nodes,[NodeParam|Rest],NPAcc,NAcc) when  % NPAcc=NodeParamsAcc.
-  (is_tuple(NodeParam) and ((size(NodeParam)==2) or (size(NodeParam)==3))) ->
-    Node=element(1,NodeParam),
-    Params=element(2,NodeParam),             % This is tracerdata!
-    case lists:member(Node,Nodes) of
-	true ->                              % Remove this one, in another session.
-	    remove_nodeparams_2(Nodes,Rest,NPAcc,NAcc);
-	false ->                             % Ok so far...
-	    case is_tool_internal_tracerdata(Params) of
-		false ->                     % Then keep it and use it later!
-		    remove_nodeparams_2(Nodes,Rest,[{Node,Params}|NPAcc],NAcc);
-		true ->                      % Since it is, remove it from the list.
-		    remove_nodeparams_2(Nodes,Rest,NPAcc,[Node|NAcc])
-	    end
-    end;
-remove_nodeparams_2(Nodes,[_|Rest],NPAcc,NAcc) -> % Faulty NodeParam, skip it!
-    remove_nodeparams_2(Nodes,Rest,NPAcc,NAcc);
-remove_nodeparams_2(_,[],NPAcc,NAcc) ->
-    {lists:reverse(NPAcc),NAcc}.
-%% ------------------------------------------------------------------------------
-
-%% Help function which adds both the nodes which were already part of another
-%% session and the nodes that we actually did not issue any init_tracing for.
-%% Returns a new Result list of [{Node,NodeResult},...].
-init_fix_resultnodes(NodesOtherSes,NodesNotInit,Result) ->
-    NewResult=init_fix_resultnodes_2(NodesOtherSes,{error,in_other_session},Result),
-    init_fix_resultnodes_2(NodesNotInit,ok,NewResult).
-
-init_fix_resultnodes_2([Node|Rest],NodeResult,Result) ->
-    [{Node,NodeResult}|init_fix_resultnodes_2(Rest,NodeResult,Result)];
-init_fix_resultnodes_2([],_,Result) ->
-    Result.                                  % Append Result to the end of the list.
-%% ------------------------------------------------------------------------------
-
-
-%% ------------------------------------------------------------------------------
-%% Help functions to reactivate.
-%% ------------------------------------------------------------------------------
-
-h_reactivate(CtrlNode,Nodes,ACTstorage) ->   % Distributed case.
-    case inviso_tool_lib:inviso_cmd(CtrlNode,cancel_suspension,[Nodes]) of
-	{ok,CSuspResults} ->
-	    {GoodNodes,BadResults}=          % Sort out nodes no longer suspended.
-		lists:foldl(fun({Node,ok},{GoodNs,BadNs})->
-				    {[Node|GoodNs],BadNs};
-			       ({Node,{error,Reason}},{GoodNs,BadNs})->
-				    {GoodNs,[{Node,{error,{cancel_suspension,Reason}}}|BadNs]}
-			    end,
-			    {[],[]},
-			    CSuspResults),
-	    Results=h_reactivate_redo_activity(CtrlNode,GoodNodes,ACTstorage,[]),
-	    {ok,BadResults++Results};
-	{error,Reason} ->                    % General failure cancelling suspend.
-	    {error,{cancel_suspension,Reason}}
-    end.
-%% ------------------------------------------------------------------------------
-
-%% Help function which traverses the list of nodes known to be ours and have
-%% cancelled their suspend. If we fail redoing one of the activities associated
-%% with a node, the node will be reported in the return value as failed. From
-%% that point on its state must be considered unknown since we do not know how
-%% many of the activities were successfully redone.
-h_reactivate_redo_activity(CtrlNode,[Node|Rest],ACTstorage,Acc) ->
-    case get_activities_actstorage(Node,ACTstorage) of
-	{ok,Activities} ->                   % The node existed in activity storage.
-	    {Good,Bad}=h_reactivate_redo_activity_2(CtrlNode,Node,Activities,0,0),
-	    h_reactivate_redo_activity(CtrlNode,Rest,ACTstorage,[{Node,{Good,Bad}}|Acc]);
-	false ->                             % Node not present in activity storage.
-	    h_reactivate_redo_activity(CtrlNode,Rest,ACTstorage,[{Node,{0,0}}|Acc])
-    end;
-h_reactivate_redo_activity(_CtrlNode,[],_,Acc) ->
-    lists:reverse(Acc).
-
-%% Help function actually redoing the activity. Note that there must be one
-%% clause here for every type of activity.
-%% Returns {NrGoodCmds,NrBadCmds}.
-%% The number of good or bad commands refers to inviso commands done. If any
-%% of the subparts of such a command returned an error, the command is concidered
-%% no good.
-h_reactivate_redo_activity_2(CtrlNode,Node,[{tf,{Op,TraceConfList}}|Rest],Good,Bad) ->
-    case inviso_tool_lib:inviso_cmd(CtrlNode,Op,[[Node],TraceConfList]) of
-	{ok,[{_Node,{ok,Answers}}]} ->
-	    case h_reactivate_redo_activity_check_tf(Answers) of
-		ok ->
-		    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good+1,Bad);
-		error ->                     % At least oneReports the first encountered error.
-		    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1)
-	    end;
-	{ok,[{_Node,{error,_Reason}}]} ->
-	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1);
-	{error,_Reason} ->                   % General error when doing cmd.
-	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1)
-    end;
-h_reactivate_redo_activity_2(CtrlNode,Node,[{tpm,{Op,InvisoCmdParams}}|Rest],Good,Bad) ->
-    case inviso_tool_lib:inviso_cmd(CtrlNode,Op,[[Node]|InvisoCmdParams]) of
-	{ok,[{_Node,ok}]} ->
-	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good+1,Bad);
-	{ok,[{_Node,{error,_Reason}}]} ->
-	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1);
-	{error,_Reason} ->                   % General error when doing cmd.
-	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1)
-    end;
-h_reactivate_redo_activity_2(_CtrlNode,_Node,[],Good,Bad) ->
-    {Good,Bad}.
-
-%% Help function traversing a list of results from inviso:tf/2 or inviso:ctf/2
-%% to see if there were any errors.
-h_reactivate_redo_activity_check_tf([N|Rest]) when integer(N) ->
-    h_reactivate_redo_activity_check_tf(Rest);
-h_reactivate_redo_activity_check_tf([{error,_Reason}|_]) ->
-    error;
-h_reactivate_redo_activity_check_tf([]) ->
-    ok.
-%% ------------------------------------------------------------------------------
-
-
-%% ------------------------------------------------------------------------------
-%% Help functions to tp (setting trace patterns, both local and global).
-%% ------------------------------------------------------------------------------
-
-%% Help function which handles both tpl and tp. Note that the non-distributed case
-%% handled with Nodes='all'.
-%% Returns what shall be the reply to the client.
-h_tp(all,PatternFunc,Mod,F,A,MS,Opts,LD) ->  % All available runtime nodes.
-    Nodes=get_all_available_nodes_rtstates(get_rtstates_ld(LD)),
-    h_tp(Nodes,PatternFunc,Mod,F,A,MS,Opts,LD);
-h_tp(Nodes,PatternFunc,Mod,F,A,MS,Opts,LD) -> % Only certain nodes in the session.
-    CtrlNode=get_ctrlnode_ld(LD),
-    Dbg=get_dbg_ld(LD),
-    SafetyCatches=get_safetycatches_ld(LD),
-    case inviso_tool_lib:expand_module_names(Nodes,Mod,Opts) of % Take care of any reg-exps.
-	{multinode_expansion,NodeMods} ->
-	    NodeTPs=inviso_tool_lib:make_patterns(SafetyCatches,Opts,Dbg,NodeMods,F,A,MS),
-	    h_tp_node_by_node(CtrlNode,PatternFunc,Dbg,NodeTPs,[]);
-	{singlenode_expansion,Modules} ->
-	    TPs=inviso_tool_lib:make_patterns(SafetyCatches,Opts,Dbg,Modules,F,A,MS),
-	    h_tp_do_tps(CtrlNode,Nodes,TPs,PatternFunc,Dbg);
-	module ->
-	    TPs=inviso_tool_lib:make_patterns(SafetyCatches,Opts,Dbg,[Mod],F,A,MS),
-	    h_tp_do_tps(CtrlNode,Nodes,TPs,PatternFunc,Dbg);
-	wildcard ->                          % Means do for all modules, no safety.
-	    h_tp_do_tps(CtrlNode,Nodes,[{Mod,F,A,MS}],PatternFunc,Dbg);
-	{error,Reason} ->
-	    {error,Reason}
-    end.
-
-%% Note that this function can never be called in the non-distributed case.
-h_tp_node_by_node(CtrlNode,PatternFunc,Dbg,[{Node,TPs}|Rest],Accum) ->
-    case h_tp_do_tps(CtrlNode,[Node],TPs,PatternFunc,Dbg) of
-	{ok,[{Node,Result}]} ->
-	    h_tp_node_by_node(CtrlNode,PatternFunc,Dbg,Rest,[{Node,Result}|Accum]);
-	{error,Reason} ->                    % Failure, but don't stop.
-	    h_tp_node_by_node(CtrlNode,PatternFunc,Dbg,Rest,[{Node,{error,Reason}}|Accum])
-    end;
-h_tp_node_by_node(_,_,_,[],Accum) ->
-    {ok,lists:reverse(Accum)}.
-
-%% Help function which does the actual call to the trace control component.
-%% Note that Nodes can be a list of nodes (including a single one) or
-%% ?LOCAL_RUNTIME if we are not distributed. The non-distributed case is otherwise
-%% detected by the 'void' CtrlNode.
-%% Returns {ok,[{Node,{ok,{NrOfFunctions,NrOfErrors}}},{Node,{error,Reason}},...]} or
-%% {error,Reason}. In the non-distributed case {ok,{NrOfFunctions,NrOfErros}} or
-%% {error,Reason}.
-h_tp_do_tps(void,_Nodes,TPs,PatternFunc,Dbg) -> % Non distributed case!
-    inviso_tool_lib:debug(tp,Dbg,[TPs,PatternFunc]),
-    case inviso:PatternFunc(TPs) of
-	{ok,Result} ->                       % A list of [Nr1,Nr2,error,...].
-	    {ok,
-	     lists:foldl(fun(N,{AccNr,AccErr}) when integer(N) ->
-				 {AccNr+N,AccErr};
-			    (error,{AccNr,AccErr}) ->
-				 {AccNr,AccErr+1}
-			 end,
-			 {0,0},
-			 Result)};
-	{error,Reason} ->
-	    {error,{PatternFunc,Reason}}
-    end;
-h_tp_do_tps(CtrlNode,Nodes,TPs,PatternFunc,Dbg) ->
-    inviso_tool_lib:debug(tp,Dbg,[Nodes,TPs,PatternFunc]),
-    case inviso_tool_lib:inviso_cmd(CtrlNode,PatternFunc,[Nodes,TPs]) of
-	{ok,Result} ->                       % Result is [{Node,Result},...].
-	    {ok,
-	     lists:map(fun({Node,{ok,Res}})->
-			       {Node,lists:foldl(fun(N,{ok,{AccNr,AccErr}}) when integer(N) ->
-							 {ok,{AccNr+N,AccErr}};
-						    (error,{AccNr,AccErr}) ->
-							 {ok,{AccNr,AccErr+1}}
-						 end,
-						 {ok,{0,0}},
-						 Res)};
-			  ({_Node,{error,Reason}})->
-			       {error,Reason}
-		       end,
-		       Result)};
-	{error,Reason} ->
-	    {error,{PatternFunc,Reason}}
-    end.
-%% ------------------------------------------------------------------------------
-
-%% ------------------------------------------------------------------------------
-%% Help functions for removing trace-patterns.
-%% ------------------------------------------------------------------------------
-
-%% NOT IMPLEMENTED YET.
-h_ctp(Node,PatternFunc,Mod,F,A,LD) ->
-    tbd.
-%% ------------------------------------------------------------------------------
-
-
-%% ------------------------------------------------------------------------------
-%% Help functions for calling the trace information facility.
-%% ------------------------------------------------------------------------------
-
-
-%% Function handling the meta trace pattern for capturing registration of local
-%% process names.
-h_tpm_localnames(CtrlNode,Nodes,RTStates,ACTstorage) ->
-    AvailableNodes=get_all_available_nodes_rtstates(RTStates),
-    {Nodes3,FaultyNodes}=remove_nodes_not_ours(Nodes,AvailableNodes),
-    case inviso_tool_lib:inviso_cmd(CtrlNode,tpm_localnames,[Nodes3]) of
-	{ok,Result} ->                       % That good we want to modify tpmstorage!
-	    NewACTstorage=add_tpm_actstorage(Result,tpm_localnames,[],ACTstorage),
-	    ErrorResult=lists:map(fun(N)->{N,{error,not_available}} end,FaultyNodes),
-	    {{ok,ErrorResult++Result},NewACTstorage};
-	{error,Reason} ->                    % If general failure, do not modify storage.
-	    {{error,Reason},ACTstorage}
-    end.
-%% ------------------------------------------------------------------------------
-
-%% Functions calling meta trace functions for specified nodes. This function is
-%% intended for use with all tmp function calls, init_tpm,tpm,tpm_ms,ctpm_ms and
-%% ctpm.
-%% Note that we must store called meta trace functions and their parameters in the
-%% activity storage in order to be able to redo them in case of a reactivate.
-h_all_tpm(CtrlNode,Nodes,TpmCmd,InvisoCmdParams,RTStates,ACTstorage) ->
-    AvailableNodes=get_all_available_nodes_rtstates(RTStates),
-    {Nodes3,FaultyNodes}=remove_nodes_not_ours(Nodes,AvailableNodes),
-    case inviso_tool_lib:inviso_cmd(CtrlNode,TpmCmd,[Nodes3|InvisoCmdParams]) of
-	{ok,Result} ->                       % That good we want to modify tpmstorage!
-	    NewACTstorage=add_tpm_actstorage(Result,TpmCmd,InvisoCmdParams,ACTstorage),
-	    ErrorResult=lists:map(fun(N)->{N,{error,not_available}} end,FaultyNodes),
-	    {{ok,ErrorResult++Result},NewACTstorage};
-	{error,Reason} ->                    % If general failure, do not modify storage.
-	    {{error,Reason},ACTstorage}
-    end.
-%% ------------------------------------------------------------------------------
-
-
-%% ------------------------------------------------------------------------------
-%% Help functions for set trace flags.
-%% ------------------------------------------------------------------------------
-
-%% Help function which sets the tracepatterns in TraceConfList for all nodes
-%% mentioned in Nodes. Note that non-distributed case is handled with Nodes='all'.
-%% Returns {Reply,NewACTstorage} where Reply is whatever shall be returned to caller
-%% and NewACTstorage is traceflag storage modified with the flags added to the
-%% corresponding nodes.
-h_tf(void,_Nodes,TraceConfList,ACTstorage,_RTStates) -> % The non-distributed case.
-    Reply=inviso:tf(TraceConfList),
-    NewACTstorage=add_tf_actstorage([{?LOCAL_RUNTIME,Reply}],tf,TraceConfList,ACTstorage),
-    {Reply,NewACTstorage};
-h_tf(CtrlNode,all,TraceConfList,ACTstorage,RTStates) ->
-    AllNodes=get_all_session_nodes_rtstates(RTStates),
-    h_tf(CtrlNode,AllNodes,TraceConfList,ACTstorage,RTStates);
-h_tf(CtrlNode,Nodes,TraceConfList,ACTstorage,_RTStates) ->
-    case inviso_tool_lib:inviso_cmd(CtrlNode,tf,[Nodes,TraceConfList]) of
-	{ok,Result} ->                       % That good we want to modify actstorage!
-	    NewACTstorage=add_tf_actstorage(Result,tf,TraceConfList,ACTstorage),
-	    {{ok,Result},NewACTstorage};
-	{error,Reason} ->                    % If general failure, do not modify actstorage.
-	    {{error,Reason},ACTstorage}
-    end.
-%% ------------------------------------------------------------------------------
-
-%% ------------------------------------------------------------------------------
-%% Help functions to stop_session.
-%% ------------------------------------------------------------------------------
-
-%% This function fetches all local log-files using our stored tracerdata. Note
-%% that there are two major ways of tranfering logfiles. Either via distributed
-%% Erlang or by common filesystem (like NFS). The default is distributed Erlang.
-%% But there may be info in the RTStates structure about a common file-system.
-%% Returns {FailedNodes,FetchedFileNames} where FailedNodes is a list of
-%% nodenames where problems occurred. Note that problems does not necessarily
-%% mean that no files were copied.
-%% FetchedFileNames contains one or two of the tuples {trace_log,Files} and/or
-%% {ti_log,Files}, listing all files successfully fetched. Note that the
-%% list of fetched files contains sublists of filenames. One for each node and
-%% tracerdata.
-%% In the non-distributed system we always use copy (since the files always
-%% resides locally).
-transfer_logfiles(RTStates,CtrlNode,Dir,Prefix,TRDstorage,Dbg,AvailableNodes) ->
-    if
-	CtrlNode==void ->                    % When non-distributed, always copy!
-		fetch_logfiles_copy(CtrlNode,Dir,Prefix,TRDstorage,Dbg,[?LOCAL_RUNTIME]);
-	true ->                              % The distributed case.
-	    {FetchNodes,CopyNodes}=find_logfile_transfer_methods(AvailableNodes,RTStates),
-	    {FailedFetchNodes,FetchedFiles}=
-		case fetch_logfiles_distributed(CtrlNode,Dir,Prefix,TRDstorage,Dbg,FetchNodes) of
-		    {ok,Failed,Files} ->     % So far no disasters.
-			{Failed,Files};
-		    {error,Reason} ->        % Means all fetch-nodes failed!
-			inviso_tool_lib:debug(transfer_logfiles,Dbg,[FetchNodes,Reason]),
-			{lists:map(fun(N)->{N,error} end,FetchNodes),[]}
-		end,
-	    {FailedCopyNodes,CopiedFiles}=
-		fetch_logfiles_copy(CtrlNode,Dir,Prefix,TRDstorage,Dbg,CopyNodes),
-	    {FailedFetchNodes++FailedCopyNodes,FetchedFiles++CopiedFiles}
-    end.
-
-%% Help function which finds out which node we have a common file system with
-%% and from which we must make distributed erlang tranfere.
-%% Returns {DistributedNodes,CopyNodes} where CopyNode is [{Node,CopyFromDir},...].
-find_logfile_transfer_methods(Nodes,RTStates) ->
-    find_logfile_transfer_methods_2(Nodes,RTStates,[],[]).
-
-find_logfile_transfer_methods_2([Node|Rest],RTStates,FetchAcc,CopyAcc) ->
-    {ok,Opts}=get_opts_rtstates(Node,RTStates), % Node must be in RTStates!
-    case lists:keysearch(?COPY_LOG_FROM,1,Opts) of
-	{value,{_,FromDir}} when list(FromDir) -> % Node has common filesystem.
-	    find_logfile_transfer_methods_2(Rest,RTStates,FetchAcc,[{Node,FromDir}|CopyAcc]);
-	{value,_} ->                         % Can't understand dir option.
-	    find_logfile_transfer_methods_2(Rest,RTStates,[Node|FetchAcc],CopyAcc);
-	false ->                             % Then we want to use fetch instead.
-	    find_logfile_transfer_methods_2(Rest,RTStates,[Node|FetchAcc],CopyAcc)
-    end;
-find_logfile_transfer_methods_2([],_,FetchAcc,CopyAcc) ->
-    {FetchAcc,CopyAcc}.
-%% ------------------------------------------------------------------------------
-
-%% Help function which transferes all local logfiles according to the tracerdata
-%% stored for the nodes in Nodes.
-%% Returns {ok,FailedNodes,FileNodeSpecs} or {error,Reason}.
-%% FailedNodes is a list of nodes where fetching logs did not succeed, partially
-%% or not at all.
-%% FileNames is a list of list of actually fetched files (the name as it is here, including
-%% Dir). The sublists are files which belong together.
-fetch_logfiles_distributed(CtrlNode,Dir,Prefix,TRDstorage,Dbg,Nodes) ->
-    LogSpecList=build_logspeclist(Nodes,TRDstorage),
-    case inviso_fetch_log(inviso_tool_lib:inviso_cmd(CtrlNode,
-						     fetch_log,
-						     [LogSpecList,Dir,Prefix])) of
-	{ok,Result} ->
-	    Files=get_all_filenames_fetchlog_result(Result,Dbg),
-	    FailedNodes=get_all_failednodes_fetchlog_result(Result),
-	    {ok,FailedNodes,Files};
-	{error,Reason} ->                    % Some general failure!
-	    {error,{fetch_log,Reason}}
-    end.
-
-%% Help function which constructs a list {Node,TracerData} for all nodes in Nodes.
-%% Note that there may be more than one tracerdata for a node, resulting in multiple
-%% tuples for that node.
-build_logspeclist(Nodes,TRDstorage) ->
-    build_logspeclist_2(Nodes,TRDstorage,[]).
-
-build_logspeclist_2([Node|Rest],TRDstorage,Acc) ->
-    TRDlist=find_tracerdata_for_node_trd(Node,TRDstorage), % A list of all tracerdata.
-    build_logspeclist_2(Rest,
-			TRDstorage,
-			[lists:map(fun(TRD)->{Node,TRD} end,TRDlist)|Acc]);
-build_logspeclist_2([],_,Acc) ->
-    lists:flatten(Acc).
-
-%% Help function which translates inviso:fetch_log return values to what I
-%% want!
-inviso_fetch_log({error,Reason}) ->
-    {error,Reason};
-inviso_fetch_log({_Success,ResultList}) ->
-    {ok,ResultList}.
-
-%% Help function which collects all filenames mentioned in a noderesult structure.
-%% The files may or may not be complete.
-%% Returns a list of list of filenames. Each sublist contains files which belong
-%% together, i.e because they are a wrap-set.
-get_all_filenames_fetchlog_result(NodeResult,Dbg) ->
-    get_all_filenames_fetchlog_result_2(NodeResult,Dbg,[]).
-
-get_all_filenames_fetchlog_result_2([{Node,{Success,FileInfo}}|Rest],Dbg,Accum) 
-  when Success=/=error, list(FileInfo) ->
-    SubAccum=get_all_filenames_fetchlog_result_3(FileInfo,[]),
-    get_all_filenames_fetchlog_result_2(Rest,Dbg,[{Node,SubAccum}|Accum]);
-get_all_filenames_fetchlog_result_2([{Node,{error,FReason}}|Rest],Dbg,Accum) ->
-    inviso_tool_lib:debug(fetch_files,Dbg,[Node,FReason]),
-    get_all_filenames_fetchlog_result_2(Rest,Dbg,Accum);
-get_all_filenames_fetchlog_result_2([],_Dbg,Accum) ->
-    Accum.
-
-get_all_filenames_fetchlog_result_3([{FType,Files}|Rest],SubAccum) ->
-    FilesOnly=lists:foldl(fun({ok,FName},Acc)->[FName|Acc];(_,Acc)->Acc end,[],Files),
-    get_all_filenames_fetchlog_result_3(Rest,[{FType,FilesOnly}|SubAccum]);
-get_all_filenames_fetchlog_result_3([],SubAccum) ->
-    SubAccum.		  
-
-%% Help function which traverses a noderesult and builds a list as return
-%% value containing the nodenames of all nodes not being complete.
-%% Note that a node may occur multiple times since may have fetched logfiles
-%% for several tracerdata from the same node. Makes sure the list contains
-%% unique node names.
-%% Returns a list nodes.
-get_all_failednodes_fetchlog_result(NodeResult) ->
-    get_all_failednodes_fetchlog_result_2(NodeResult,[]).
-
-get_all_failednodes_fetchlog_result_2([{_Node,{complete,_}}|Rest],Acc) ->
-    get_all_failednodes_fetchlog_result_2(Rest,Acc);
-get_all_failednodes_fetchlog_result_2([{Node,{_Severity,_}}|Rest],Acc) ->
-    case lists:member(Node,Acc) of
-	true ->                              % Already in the list.
-	    get_all_failednodes_fetchlog_result_2(Rest,Acc);
-	false ->                             % Not in Acc, add it!
-	    get_all_failednodes_fetchlog_result_2(Rest,[Node|Acc])
-    end;
-get_all_failednodes_fetchlog_result_2([],Acc) ->
-    Acc.
-%% ------------------------------------------------------------------------------
-
-%% Help function which copies files from one location to Dir and at the same time
-%% adds the Prefix to the filename. NodeSpecs contains full path to the files. The
-%% reason the node information is still part of NodeSpecs is that otherwise we can
-%% not report faulty nodes. Note that one node may occur multiple times since there
-%% may be more than one tracerdata for a node.
-%% Returns {FailedNodes,Files} where FailedNodes is a list of nodes where problems
-%% occurred. Files is a tuple list of [{Node,[{FType,FileNames},...]},...].
-fetch_logfiles_copy(CtrlNode,Dir,Prefix,TRDstorage,Dbg,NodeSpecs) ->
-    CopySpecList=build_copylist(CtrlNode,Dbg,NodeSpecs,TRDstorage),
-    fetch_logfiles_copy_2(Dir,Prefix,Dbg,CopySpecList,[],[]).
-
-fetch_logfiles_copy_2(Dir,Prefix,Dbg,[{Node,CopySpecs}|Rest],FailedNodes,Files) ->
-    case fetch_logfiles_copy_3(Dir,Prefix,Dbg,CopySpecs,[],0) of
-	{0,LocalFiles} ->                    % Copy went ok and zero errors.
-	    fetch_logfiles_copy_2(Dir,Prefix,Dbg,Rest,FailedNodes,[{Node,LocalFiles}|Files]);
-	{_N,LocalFiles} ->                   % Copied files, but some went wrong.
-	    case lists:member(Node,FailedNodes) of
-		true ->                      % Node already in FailedNodes.
-		    fetch_logfiles_copy_2(Dir,Prefix,Dbg,Rest,FailedNodes,
-					  [{Node,LocalFiles}|Files]);
-		false ->                     % Node not marked as failed, yet.
-		    fetch_logfiles_copy_2(Dir,Prefix,Dbg,Rest,[Node|FailedNodes],
-					  [{Node,LocalFiles}|Files])
-	    end
-    end;
-fetch_logfiles_copy_2(_,_,_,[],FailedNodes,Files) ->
-    {FailedNodes,Files}.                     % The return value from fetch_logfiles_copy.
-
-fetch_logfiles_copy_3(Dir,Prefix,Dbg,[{FType,RemoteFiles}|Rest],Results,Errors) ->
-    {Err,LocalFiles}=fetch_logfiles_copy_3_1(Dir,Prefix,Dbg,RemoteFiles,[],0),
-    fetch_logfiles_copy_3(Dir,Prefix,Dbg,Rest,[{FType,LocalFiles}|Results],Errors+Err);
-fetch_logfiles_copy_3(_,_,_,[],Results,Errors) ->
-    {Errors,Results}.
-
-%% For each file of one file-type (e.g. trace_log).
-fetch_logfiles_copy_3_1(Dir,Prefix,Dbg,[File|Rest],LocalFiles,Errors) ->
-    DestName=Prefix++filename:basename(File),
-    Destination=filename:join(Dir,DestName),
-    case do_copy_file(File,Destination) of
-	ok ->
-	    fetch_logfiles_copy_3_1(Dir,Prefix,Dbg,Rest,[DestName|LocalFiles],Errors);
-	{error,Reason} ->
-	    inviso_tool_lib:debug(copy_files,Dbg,[File,Destination,Reason]),
-	    fetch_logfiles_copy_3_1(Dir,Prefix,Dbg,Rest,LocalFiles,Errors+1)
-    end;
-fetch_logfiles_copy_3_1(_,_,_,[],LocalFiles,Errors) ->
-    {Errors,LocalFiles}.
-
-%% Help function which builds a [{Node,[{Type,[ListOfRemoteFiles]}},...}]
-%% where Type describes trace_log or ti_log and each entry in ListOfRemoteFiles
-%% is a complete path to a file to be copied.
-build_copylist(CtrlNode,Dbg,NodeSpecList,TRDstorage) ->
-    build_copylist_2(CtrlNode,Dbg,NodeSpecList,TRDstorage,[]).
-
-%% For each node specified in the NodeSpecList.
-build_copylist_2(CtrlNode,Dbg,[{Node,SourceDir}|Rest],TRDstorage,Acc) ->
-    TRDlist=find_tracerdata_for_node_trd(Node,TRDstorage),
-    CopySpecList=build_copylist_3(CtrlNode,Dbg,SourceDir,Node,TRDlist),
-    build_copylist_2(CtrlNode,Dbg,Rest,TRDstorage,[CopySpecList|Acc]);
-build_copylist_2(_,_,[],_,Acc) ->
-    lists:flatten(Acc).
-
-%% For each tracerdata found for the node.
-build_copylist_3(void,Dbg,SourceDir,Node,[TRD|Rest]) -> % The non-distributed case.
-    case inviso:list_logs(TRD) of
-	{ok,FileSpec} when list(FileSpec) -> % [{trace_log,Dir,Files},...]
-	    NewFileSpec=build_copylist_4(SourceDir,FileSpec,[]),
-	    [{Node,NewFileSpec}|build_copylist_3(void,Dbg,SourceDir,Node,Rest)];
-	{ok,no_log} ->                       % This tracedata not associated with any log.
-	    build_copylist_3(void,Dbg,SourceDir,Node,Rest);
-	{error,Reason} ->
-	    inviso_tool_lib:debug(list_logs,Dbg,[Node,TRD,Reason]),
-	    build_copylist_3(void,Dbg,SourceDir,Node,Rest)
-    end;
-build_copylist_3(CtrlNode,Dbg,SourceDir,Node,[TRD|Rest]) -> % The distributed case.
-    case inviso_tool_lib:inviso_cmd(CtrlNode,list_logs,[[{Node,TRD}]]) of
-	{ok,[{Node,{ok,FileSpec}}]} when list(FileSpec) ->
-	    NewFileSpec=build_copylist_4(SourceDir,FileSpec,[]),
-	    [{Node,NewFileSpec}|build_copylist_3(CtrlNode,Dbg,SourceDir,Node,Rest)];
-	{ok,[{Node,{ok,no_log}}]} ->         % It relays to another node, no files!
-	    build_copylist_3(CtrlNode,Dbg,SourceDir,Node,Rest);
-	{ok,[{Node,{error,Reason}}]} ->
-	    inviso_tool_lib:debug(list_logs,Dbg,[Node,TRD,Reason]),
-	    build_copylist_3(CtrlNode,Dbg,SourceDir,Node,Rest);
-	{error,Reason} ->                    % Some general failure.
-	    inviso_tool_lib:debug(list_logs,Dbg,[Node,TRD,Reason]),
-	    build_copylist_3(CtrlNode,Dbg,SourceDir,Node,Rest)
-    end;
-build_copylist_3(_,_,_,_,[]) ->
-    [].
-
-%% Help function which makes a [{Type,Files},...] list where each file in Files
-%% is with full path as found from our file-system.
-build_copylist_4(SourceDir,[{Type,_Dir,Files}|Rest],Accum) ->
-    NewFiles=
-	lists:foldl(fun(FName,LocalAcc)->[filename:join(SourceDir,FName)|LocalAcc] end,
-		    [],
-		    Files),
-    build_copylist_4(SourceDir,Rest,[{Type,NewFiles}|Accum]);
-build_copylist_4(_,[],Accum) ->
-    Accum.
-				 
-
-%% Help function which copies a file using os:cmd.
-%% Returns 'ok' or {error,Reason}.
-do_copy_file(Source,Destination) ->
-    case os:type() of
-	{win32,_} ->
-	    os:cmd("copy "++Source++" "++Destination), % Perhaps a test on success?
-	    ok;
-	{unix,_} ->
-	    os:cmd("cp "++Source++" "++Destination), % Perhaps a test on success?
-	    ok
-    end.
-%% ------------------------------------------------------------------------------
-
-
-%% ------------------------------------------------------------------------------
-
-%% ==============================================================================
-%% Various help functions.
-%% ==============================================================================
-
-%% Help function going through the Nodes list and checking that only nodes
-%% mentioned in OurNodes gets returned. It also makes the nodes in the return
-%% value unique.
-remove_nodes_not_ours(Nodes,OurNodes) ->
-    remove_nodes_not_ours_2(Nodes,OurNodes,[],[]).
-
-remove_nodes_not_ours_2([Node|Rest],OurNodes,OurAcc,OtherAcc) ->
-    case lists:member(Node,OurNodes) of
-	true ->                              % Ok it is one of our nodes.
-	    case lists:member(Node,OurAcc) of
-		true ->                      % Already in the list, skip.
-		    remove_nodes_not_ours_2(Rest,OurNodes,OurAcc,OtherAcc);
-		false ->
-		    remove_nodes_not_ours_2(Rest,OurNodes,[Node|OurAcc],OtherAcc)
-	    end;
-	false ->
-	    case lists:member(Node,OtherAcc) of
-		true ->
-		    remove_nodes_not_ours_2(Rest,OurNodes,OurAcc,OtherAcc);
-		false ->
-		    remove_nodes_not_ours_2(Rest,OurNodes,OurAcc,[Node|OtherAcc])
-	    end
-    end;
-remove_nodes_not_ours_2([],_,OurAcc,OtherAcc) ->
-    {lists:reverse(OurAcc),lists:reverse(OtherAcc)}.
-%% ------------------------------------------------------------------------------
-
-%% Help function which returns 'true' or 'false' depending on if TracerData is
-%% meant to be used by the session handler (true) or if it supposed to be passed
-%% on to the trace system.
-is_tool_internal_tracerdata(_) -> % CURRENTLY NO INTERNAL TRACER DATA!
-    false.
-%% ------------------------------------------------------------------------------
-
-%% Help function which checks that all nodes in the first list of nodes exists
-%% in the second list of nodes. Returns 'true' or 'false'. The latter if as much
-%% as one incorrect node was found.
-check_our_nodes([Node|Rest],AllNodes) ->
-    case lists:member(Node,AllNodes) of
-	true ->
-	    check_our_nodes(Rest,AllNodes);
-	false ->                             % Then we can stop right here.
-	    false
-    end;
-check_our_nodes([],_) ->
-    true.
-%% ------------------------------------------------------------------------------
-
-%% Help function which checks that a directory actually exists. Returns 'true' or
-%% 'false'.
-check_directory_exists(Dir) ->
-    case file:read_file_info(Dir) of
-	{ok,#file_info{type=directory}} ->
-	    true;
-	_ ->                                 % In all other cases it is not valid.
-	    false
-    end.
-%% ------------------------------------------------------------------------------
-
-%% This function stops the tracing on all nodes in Nodes. Preferably Nodes is a list
-%% of only tracing runtime components. Not that there will actually be any difference
-%% since the return value does not reflect how stopping the nodes went.
-%% Returns 'ok' or {error,Reason}, the latter only in case of general failure.
-stop_all_tracing(void,Dbg,[?LOCAL_RUNTIME]) ->   % The non-distributed case, and is tracing.
-    case inviso:stop_tracing() of
-	{ok,_State} ->
-	    ok;
-	{error,Reason} ->                    % We actually don't care.
-	    inviso_tool_lib:debug(stop_tracing,Dbg,[?LOCAL_RUNTIME,Reason]),
-	    ok
-    end;
-stop_all_tracing(void,_,_) ->                % There is no local runtime started.
-    ok;
-stop_all_tracing(CtrlNode,Dbg,Nodes) ->
-    case inviso_tool_lib:inviso_cmd(CtrlNode,stop_tracing,[Nodes]) of
-	{ok,Result} ->                       % The result is only used for debug.
-	    Failed=lists:foldl(fun({N,{error,Reason}},Acc)->[{N,{error,Reason}}|Acc];
-				  (_,Acc)->Acc
-			       end,
-			       [],
-			       Result),
-	    if
-		Failed==[] ->
-		    ok;
-		true ->
-		    inviso_tool_lib:debug(stop_tracing,Dbg,[Nodes,Failed]),
-		    ok
-	    end;
-	{error,Reason} ->
-	    {error,{stop_tracing,Reason}}
-    end.
-%% ------------------------------------------------------------------------------
-
-%% Help function removing all local logs using the tracerdata to determine what
-%% logs to remove from where.
-%% There is no significant return value since it is not really clear what to do
-%% if removal went wrong. The function can make debug-reports thought.
-remove_all_local_logs(CtrlNode,TRDstorage,Nodes,Dbg) ->
-    LogSpecList=build_logspeclist_remove_logs(Nodes,TRDstorage),
-    case inviso_tool_lib:inviso_cmd(CtrlNode,delete_log,[LogSpecList]) of
-	{ok,Results} ->
-	    case look_for_errors_resultlist(Results) of
-		[] ->                        % No errors found in the result!
-		    true;
-		Errors ->
-		    inviso_tool_lib:debug(remove_all_local_logs,Dbg,[Errors]),
-		    true
-	    end;
-	{error,Reason} ->                    % Some general error.
-	    inviso_tool_lib:debug(remove_all_local_logs,Dbg,[{error,Reason}]),
-	    true
-    end.
-
-%% Help function which puts together a list of {Node,Tracerdata} tuples. Note that
-%% we must build one tuple for each tracerdata for one node.
-build_logspeclist_remove_logs(Nodes,TRDstorage) ->
-    [{Node,TracerData}||Node<-Nodes,TracerData<-find_tracerdata_for_node_trd(Node,TRDstorage)].
-%% ------------------------------------------------------------------------------
-
-%% Help function which traverses a resultlist from an inviso function. Such are
-%% built up as [{Node,SubResults},...] where SubResult is a list of tuples for each
-%% file-type (e.g trace_log) {FType,FileList} where a FileList is either {error,Reason}
-%% or {ok,FileName}.
-%% Returns a list of {Node,[{error,Reason},...]}.
-look_for_errors_resultlist([{Node,{error,Reason}}|Rest]) ->
-    [{Node,{error,Reason}}|look_for_errors_resultlist(Rest)];
-look_for_errors_resultlist([{Node,{ok,NResults}}|Rest]) when list(NResults) ->
-    case look_for_errors_resultlist_2(NResults,[]) of
-	[] ->
-	    look_for_errors_resultlist(Rest);
-	Errors ->                            % A list of lists.
-	    [{Node,lists:flatten(Errors)}|look_for_errors_resultlist(Rest)]
-    end;
-look_for_errors_resultlist([_|Rest]) ->
-    look_for_errors_resultlist(Rest);
-look_for_errors_resultlist([]) ->
-    [].
-
-look_for_errors_resultlist_2([{_FType,NSubResult}|Rest],Accum) ->
-    case lists:filter(fun({error,_Reason})->true;(_)->false end,NSubResult) of
-	[] ->                                % No errors for this node.
-	    look_for_errors_resultlist_2(Rest,Accum);
-	Errors ->                            % A list of at least one error.
-	    look_for_errors_resultlist_2(Rest,[Errors|Accum])
-    end;
-look_for_errors_resultlist_2([],Accum) ->
-    Accum.
-%% ------------------------------------------------------------------------------
-
-
-%% ------------------------------------------------------------------------------
-%% Functions working on the loopdata structure.
-%% Its main purpose is to store information about runtime components participating
-%% in the session and their current status.
-%% ------------------------------------------------------------------------------
-
--record(ld,{parent,
-	    ctrlnode,
-	    ctrlpid,                         % To where to send inviso cmd.
-	    rtstates,
-	    tracerdata,
-	    safetycatches,
-	    dbg,
-	    actstorage                       % Activity storage, for reactivate.
-	   }).
-
-%% Function creating the initial datastructure.
-%% The datastructure is [{Node,State},...].
-%%
-%% The tracerdata table is a bag simply for the reason that if we try to insert
-%% the same tracerdata for a node twice, we will end up with one tracerdata after
-%% all. This is useful when we insert tracerdata ourselves, the tracerdata will
-%% come as a state-change too.
-mk_ld(Parent,CtrlNode,CtrlPid,RTStates,NodeParams,OtherNodes,SafetyCatches,Dbg) ->
-    TRDtableName=list_to_atom("inviso_tool_sh_trdstorage_"++pid_to_list(self())),
-    TRDtid=ets:new(TRDtableName,[bag]),
-    ACTtableName=list_to_atom("inviso_tool_sh_actstorage_"++pid_to_list(self())),
-    ACTtid=ets:new(ACTtableName,[bag]),
-    mk_ld_fill_tracerdata(CtrlNode,TRDtid,NodeParams,OtherNodes), % Fill the ETS table.
-    #ld{parent=Parent,                       % The tool main process.
-	ctrlnode=CtrlNode,                   % Node name where the control component is.
-	ctrlpid=CtrlPid,                     % The process id of the control component.
-	rtstates=RTStates,                   % All nodes and their state/status.
-	tracerdata=TRDtid,
-	safetycatches=SafetyCatches,
-	dbg=Dbg,
-	actstorage=ACTtid
-       }.
-
-%% Help function which inserts tracer data for the nodes. Note that we can get
-%% tracer data either from the return value from init_tracing or by asking the
-%% node for it. The latter is necessary for the nodes which were marked not to
-%% be initiated by the session handler. This maybe because those nodes have
-%% autostarted.
-mk_ld_fill_tracerdata(CtrlNode,TId,NodeParams,OtherNodes) ->
-    mk_ld_fill_tracerdata_nodeparams(TId,NodeParams),
-    mk_ld_fill_tracerdata_othernodes(CtrlNode,TId,OtherNodes).
-
-mk_ld_fill_tracerdata_nodeparams(TId,[{Node,TracerData}|Rest]) ->
-    ets:insert(TId,{Node,TracerData}),
-    mk_ld_fill_tracerdata_nodeparams(TId,Rest);
-mk_ld_fill_tracerdata_nodeparams(_,[]) ->
-    ok.
-
-mk_ld_fill_tracerdata_othernodes(_,_,[]) ->  % Then not necessary to do anything.
-    ok;
-mk_ld_fill_tracerdata_othernodes(void,TId,[Node]) -> % The non-distributed case.
-    case inviso:get_tracerdata() of
-	{error,_Reason} ->                   % Perhaps in state new or disconnected.
-	    ok;                              % Do nothing.
-	{ok,TracerData} ->
-	    ets:insert(TId,{Node,TracerData})
-    end;
-mk_ld_fill_tracerdata_othernodes(CtrlNode,TId,Nodes) ->
-    case inviso_tool_lib:invisomd(CtrlNode,get_tracerdata,[Nodes]) of
-	{ok,Results} ->
-	    mk_ld_fill_tracerdata_othernodes_2(TId,Results);
-	{error,_Reason} ->                   % Strange, we will probably crash later.
-	    ok
-    end.
-
-mk_ld_fill_tracerdata_othernodes_2(TId,[{_Node,{ok,no_tracerdata}}|Rest]) ->
-    mk_ld_fill_tracerdata_othernodes_2(TId,Rest); % It was not initiated then!
-mk_ld_fill_tracerdata_othernodes_2(TId,[{Node,{ok,TracerData}}|Rest]) ->
-    ets:insert(TId,{Node,TracerData}),
-    mk_ld_fill_tracerdata_othernodes_2(TId,Rest);
-mk_ld_fill_tracerdata_othernodes_2(_,[]) ->
-    ok.
-%% ------------------------------------------------------------------------------
-
-get_ctrlnode_ld(#ld{ctrlnode=CtrlNode}) ->
-    CtrlNode.
-%% ------------------------------------------------------------------------------
-
-
-get_ctrlpid_ld(#ld{ctrlpid=CtrlPid}) ->
-    CtrlPid.
-%% ------------------------------------------------------------------------------
-
-get_rtstates_ld(#ld{rtstates=RTStates}) ->
-    RTStates.
-
-put_rtstates_ld(NewRTStates,LD) ->
-    LD#ld{rtstates=NewRTStates}.
-%% ------------------------------------------------------------------------------
-
-get_trdstorage_ld(#ld{tracerdata=TId}) ->
-    TId.
-
-put_trdstorage_ld(_NewTId,LD) ->
-    LD.
-%% ------------------------------------------------------------------------------
-
-%% Help function which adds the current tracerdata of node Node to the tracerdata
-%% storage. We only want to add tracerdata we have not seen before. We therefore
-%% avoid adding it if the node already is in state ?TRACING.
-%% Returns a new tracerdata (what ever it is)!
-add_current_tracerdata_ld(CtrlNode,Node,RTStates,TId) ->
-    case get_statestatus_rtstates(Node,RTStates) of
-	{ok,{?TRACING,_}} ->                 % Then we have already added the tracerdata.
-	    TId;                             % Then do nothing.
-	{ok,_} ->                            % Since we were not tracing before.
-	    case add_current_tracerdata_ld_fetchtracerdata(CtrlNode,Node) of
-		{ok,TracerData} ->
-		    ets:insert(TId,{Node,TracerData});
-		no_tracerdata ->             % Strange, how could we become tracing
-		    ok;
-		{error,_Reason} ->           % The node perhaps disconnected!?
-		    ok
-	    end;
-	false ->                             % Very strange, not our node!
-	    ok                               % Do nothing.
-    end.
-
-add_current_tracerdata_ld_fetchtracerdata(void,_Node) ->
-    case inviso:get_tracerdata() of
-	{ok,TracerData} ->
-	    {ok,TracerData};
-	{error,no_tracerdata} ->
-	    no_tracerdata;
-	{error,Reason} ->
-	    {error,Reason}
-    end;
-add_current_tracerdata_ld_fetchtracerdata(CtrlNode,Node) ->
-    case inviso_tool_lib:inviso_cmd(CtrlNode,get_tracerdata,[[Node]]) of
-	{ok,[{Node,{ok,TracerData}}]} ->
-	    {ok,TracerData};
-	{ok,[{Node,{error,no_tracerdata}}]} ->
-	    no_tracerdata;
-	{ok,[{Node,{error,Reason}}]} ->
-	    {error,Reason};
-	{error,Reason} ->
-	    {error,Reason}
-    end.
-%% ------------------------------------------------------------------------------
-
-
-get_safetycatches_ld(#ld{safetycatches=SCs}) ->
-    SCs.
-%% ------------------------------------------------------------------------------
-
-get_dbg_ld(#ld{dbg=Dbg}) ->
-    Dbg.
-%% ------------------------------------------------------------------------------
-
-get_actstorage_ld(#ld{actstorage=ACTstorage}) ->
-    ACTstorage.
-
-put_actstorage_ld(_NewACTstorage,LD) ->
-    LD.
-%% ------------------------------------------------------------------------------
-
-
-
-%% ------------------------------------------------------------------------------
-%% Functions working on the rtstates structure (which is a substructure of loopdata).
-%% It is either:
-%% [{Node,StateStatus,Opts},...]
-%% Node is either the node name of the runtime component erlang node or
-%% ?LOCAL_RUNTIME as returned from the trace control component.
-%% StateStatus is {State,Status}, 'unavailable' or 'unknown'.
-%% Status is the returnvalue from trace control component.
-%%   i.e: running | {suspended,Reason}
-%% ------------------------------------------------------------------------------
-
-%% Function contructing an rtstates structure from a list of [{Node,StateStatus,Opts},...].
-to_rtstates(ListOfStates) when list(ListOfStates) ->
-    ListOfStates.
-%% ------------------------------------------------------------------------------
-
-%% Function which takes a rtstates structure and returns a list of [{Node,StateStatus},...].
-from_rtstates(RTStates) ->
-    RTStates.
-%% ------------------------------------------------------------------------------
-
-%% Function which takes an rtstates structure and a result as returned from
-%% init_tracing. The RTStates is modified for the nodes that changed state as a
-%% result of successful init_tracing.
-%% Returns a new RTStates.
-set_tracing_rtstates([E={Node,_StateStatus,Opts}|Rest],Result) ->
-    case lists:keysearch(Node,1,Result) of
-	{value,{_,ok}} ->                    % Means state-change to tracing!
-	    [{Node,{tracing,running},Opts}|set_tracing_rtstates(Rest,Result)];
-	_ ->                                 % Otherwise, leave it as is.
-	    [E|set_tracing_rtstates(Rest,Result)]
-    end;
-set_tracing_rtstates([],_Result) ->
-    [].
-%% ------------------------------------------------------------------------------
-
-%% Function updating the state/status for a certain runtime component.
-%% Returns a new RTStates structure. Note that Node must not necessarily be one
-%% of the nodes in the session. Meaning that Node shall not be added to RTStates
-%% should it not already be in there.
-statechange_rtstates(Node,State,Status,RTStates) when list(RTStates) ->
-    case lists:keysearch(Node,1,RTStates) of
-	{value,{_,_,Opts}} ->
-	    lists:keyreplace(Node,1,RTStates,{Node,{State,Status},Opts});
-	_ ->                                 % Then Node does not exist.
-	    RTStates                         % Just keep it as is, as keyreplace would have done.
-    end.
-%% ------------------------------------------------------------------------------
-
-%% Function updating the state/status for a certain runtime component. The
-%% state/status is set to 'unavailable'.
-%% Returns a new RTStates structure.
-set_unavailable_rtstates(Node,RTStates) when list(RTStates) ->
-    case lists:keysearch(Node,1,RTStates) of
-	{value,{_,_,Opts}} ->
-	    lists:keyreplace(Node,1,RTStates,{Node,unavailable,Opts});
-	_ ->                                 % Then Node does not exist.
-	    RTStates                         % Just keep it as is, as keyreplace would have done.
-    end.
-%% ------------------------------------------------------------------------------
-
-%% Function finding the statestatus associated with Node in the RTStates structure.
-%% Returns {ok,StateStatus} or 'false'.
-get_statestatus_rtstates(Node,RTStates) ->
-    case lists:keysearch(Node,1,RTStates) of
-	{value,{_,StateStatus,_}} ->
-	    {ok,StateStatus};
-	false ->
-	    false
-    end.
-%% ------------------------------------------------------------------------------
-
-%% Help function which returns a list of all nodes that are currently marked
-%% as available to us in the runtime state structure.	      
-get_all_available_nodes_rtstates(RTStates) ->
-    get_all_session_nodes_rtstates(lists:filter(fun({_N,unavailable,_})->false;
-						   (_)->true
-						end,
-						RTStates)).
-%% ------------------------------------------------------------------------------
-
-%% Help function returning a list of all nodes belonging to this session.
-get_all_session_nodes_rtstates(RTStates) ->
-    lists:map(fun({Node,_,_})->Node end,RTStates).
-%% ------------------------------------------------------------------------------
-
-%% Function which returns a list of nodes that are indicated as tracing in the
-%% RTStates structure.
-get_all_tracing_nodes_rtstates(RTStates) ->
-    lists:map(fun({N,_,_})->N end,
-	      lists:filter(fun({_,{tracing,_},_})->true;(_)->false end,RTStates)).
-%% ------------------------------------------------------------------------------
-
-%% Returns the options associated with Node in the RTStates structure.
-get_opts_rtstates(Node,RTStates) ->
-    case lists:keysearch(Node,1,RTStates) of
-	{value,{_,_,Opts}} ->
-	    {ok,Opts};
-	false ->
-	    false
-    end.
-
-%% ------------------------------------------------------------------------------
-%% Functions working on the tracerdata structure, which is a part of the loopdata.
-%% The tracerdata structure is an ETS-table of type bag storing:
-%% {Node,TracerData}.
-%% Note that there can of course be multiple entries for a node.
-%% ------------------------------------------------------------------------------
-
-%% Help function which takes a tracerdata loopdata structure and returns a list
-%% of all stored tracerdata for a certain Node.
-find_tracerdata_for_node_trd(Node,TRD) ->
-    case ets:lookup(TRD,Node) of
-	Result when list(Result) ->
-	    lists:map(fun({_Node,TracerData})->TracerData end,Result);
-	_ ->                                 % Should probably never happend.
-	    []
-    end.
-%% ------------------------------------------------------------------------------
-			 
-
-%% ------------------------------------------------------------------------------
-%% Functions working on the activity storage structure, which is part of the
-%% loopdata. It stores entries about things that needs to be "redone" in case
-%% of a reactivation of the node. The time order is also important.
-%% Note that for every ActivityType there must be a "handler" in the reactivation
-%% functionality.
-%%
-%% The structure is a bag of {Node,ActivityType,What}.
-%%   ActivityType/What=tf/{Op,TraceConfList}|tpm/{Op,[Mod,Func,Arity,MS,CallFunc]}
-%%                                              /{Op,[Mod,Func,Arity,MS,CallFunc,ReturnFunc]}
-%%                                              /{Op,[]}
-%%     TraceConfList=[{Proc,Flags},...]
-%%     How=true|false
-%% ------------------------------------------------------------------------------
-
-%% Function that adds meta-pattern activities to the activity storage. Note
-%% that one of the parameters to the function is a return value from an
-%% inviso call. In that way we do not enter activities that were unsuccessful.
-%% Op can be either the setting or clearing of a meta pattern.
-%% Returns a new ACTstorage.
-add_tpm_actstorage([{Node,ok}|Rest],Op,InvisoCmdParams,ACTstorage) ->
-    true=ets:insert(ACTstorage,{Node,tpm,{Op,InvisoCmdParams}}),
-    add_tpm_actstorage(Rest,Op,InvisoCmdParams,ACTstorage);
-add_tpm_actstorage([_|Rest],Op,InvisoCmdParams,ACTstorage) ->
-    add_tpm_actstorage(Rest,Op,InvisoCmdParams,ACTstorage);
-add_tpm_actstorage([],_,_,ACTstorage) ->
-    ACTstorage.
-
-%% Function that adds process trace-flags to the activity storage. Note that one
-%% of the parameters is the return value from an inviso function. Meaning that
-%% if the flags failed in their entirety, no activity will be saved. If only
-%% some of the flags failed, we will not go through the effort of trying to find
-%% out exactly which.
-%% Returns a new activity storage structure.
-add_tf_actstorage([{_Node,{error,_Reason}}|Rest],Op,TraceConfList,ACTstorage) ->
-    add_tf_actstorage(Rest,Op,TraceConfList,ACTstorage);
-add_tf_actstorage([{Node,_Result}|Rest],Op,TraceConfList,ACTstorage) ->
-    true=ets:insert(ACTstorage,{Node,tf,{Op,TraceConfList}}),
-    add_tf_actstorage(Rest,Op,TraceConfList,ACTstorage);
-add_tf_actstorage([],_,_,ACTstorage) ->
-    ACTstorage.
-%% ------------------------------------------------------------------------------
-
-%% Finds all activities associated with Node. Returns a list of them in the
-%% same order as they were inserted.
-get_activities_actstorage(Node,ACTstorage) ->
-    case ets:lookup(ACTstorage,Node) of
-	[] ->
-	    false;
-	Result when list(Result) ->
-	    {ok,lists:map(fun({_N,Type,What})->{Type,What} end,Result)}
-    end.
-%% ------------------------------------------------------------------------------
-
-%% Function removing all activity entries associated with Node. This is useful
-%% if the Node disconnects for instance.
-del_node_actstorage(Node,ACTstorage) ->
-    ets:delete(ACTstorage,Node),
-    ACTstorage.
-%% ------------------------------------------------------------------------------
-
+%% %CopyrightBegin%
+%% 
+%% Copyright Ericsson AB 2005-2011. All Rights Reserved.
+%% 
+%% The contents of this file are subject to the Erlang Public License,
+%% Version 1.1, (the "License"); you may not use this file except in
+%% compliance with the License. You should have received a copy of the
+%% Erlang Public License along with this software. If not, it can be
+%% retrieved online at http://www.erlang.org/.
+%% 
+%% Software distributed under the License is distributed on an "AS IS"
+%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+%% the License for the specific language governing rights and limitations
+%% under the License.
+%% 
+%% %CopyrightEnd%
+%%
+%% Description:
+%% The runtime component of the trace tool Inviso.
+%%
+%% Authors:
+%% Lennart �hman, [email protected]
+%% -----------------------------------------------------------------------------
+
+-module(inviso_tool_sh).
+
+%% Inviso Session Handler.
+%% This is the code for the session handler process. Its purpose is that we have
+%% one session handler process for each trace session started through the
+%% start_session inviso tool API. The session handler process is responsible for:
+%%
+%% -Knowing the state/status of all participating runtime components.
+%% -Keeping storage of all tracerdata all our participants have used. This means
+%%  also to find out the tracerdata of runtime components connecting by them
+%%  selves.
+%%
+%% STORAGE STRATEGY
+%% ----------------
+%% The local information storage can be changed by two things. Either by executing
+%% commands issued through our APIs. Or by receiving trace_event from the control
+%% component. When we execute commands, a corresponding event will also follow.
+%% Meaning that in those situations we are informed twice.
+%% A simple strategy could be to wait for the event even when doing the changes
+%% to the runtime components our self (through commands). But that may result in
+%% a small time frame where someone might do yet another command and failing
+%% because the local information storage is not uptodate as it would have been
+%% expected to be. Therefore we always update the local storage when making changes
+%% to a runtime component our selves. There will eventually be a double update
+%% through an incoming event. But the storage must coop with that, preventing
+%% inconsitancies to happend. An example of a strategy is that the tracerdata table
+%% is a bag, not allowing for double entries of the same kind. Therefore a double
+%% update is harmless there.
+
+%% ------------------------------------------------------------------------------
+%% Module wide constants.
+%% ------------------------------------------------------------------------------
+-define(LOCAL_RUNTIME,local_runtime).        % Used as node name when non-disitrbuted.
+-define(TRACING,tracing).                    % A state defined by the control component.
+-define(RUNNING,running).                    % A status according to control componet.
+
+-define(COPY_LOG_FROM,copy_log_from).        % Common fileystem option.
+%% ------------------------------------------------------------------------------
+
+%% ------------------------------------------------------------------------------
+%% API exports.
+%% ------------------------------------------------------------------------------
+-export([start_link/5,start_link/8]).
+-export([cancel_session/1,stop_session/3]).
+-export([reactivate/1,reactivate/2]).
+-export([ctpl/5,tpl/5,tpl/6,tpl/7,
+	 tf/2,tf/3,
+	 tpm_localnames/2,init_tpm/6,init_tpm/9,tpm/6,tpm/7,tpm/10,
+	 tpm_ms/7,ctpm_ms/6,ctpm/5
+	]).
+%% ------------------------------------------------------------------------------
+
+
+%% ------------------------------------------------------------------------------
+%% Internal exports.
+%% ------------------------------------------------------------------------------
+-export([init/1,handle_call/3,handle_info/2,terminate/2]).
+
+-export([get_loopdata/1]).
+%% ------------------------------------------------------------------------------
+
+
+%% ------------------------------------------------------------------------------
+%% Includes.
+%% ------------------------------------------------------------------------------
+-include_lib("kernel/include/file.hrl").     % Necessary for file module.
+%% ------------------------------------------------------------------------------
+
+
+%% ==============================================================================
+%% Exported API functions.
+%% ==============================================================================
+
+%% start_link(From,NodeParams,CtrlNode,CtrlPid,SafetyCatches,NodesIn,NodesNotIn) =
+%%     {ok,Pid} | {error,Reason}
+%%   From= pid(), the initial client expecting the reply.
+%%   NodeParams=[{Node,TracerData},{Node,TracerData,Opts}...]
+%%   CtrlNode=atom() | 'void', the node where the trace control component is.
+%%   CtrlPid=pid(), the pid of the trace control component.
+%%   SafetyCatches=
+%%   Dir=string(), where to place fetched logs and the merged log.
+%%   Dbg=debug structure.
+%%   NodesIn=[Node,...], list of nodes already in another session.
+%%   NodesNotIn=[Node,...], list of nodes not in another session.
+%%
+%% Starts a session-handler. It keeps track of the the state and status of all
+%% participating runtime components. Note that there is a non-distributed case too.
+%% In the non-distributed case there is no things such as CtrlNode.
+start_link(From,TracerData,CtrlPid,SafetyCatches,Dbg) ->
+    gen_server:start_link(?MODULE,
+			  {self(),From,TracerData,CtrlPid,SafetyCatches,Dbg},
+			  []).
+
+start_link(From,NodeParams,CtrlNode,CtrlPid,SafetyCatches,Dbg,NodesIn,NodesNotIn) ->
+    gen_server:start_link(?MODULE,
+			  {self(),From,NodeParams,CtrlNode,CtrlPid,
+			   SafetyCatches,Dbg,NodesIn,NodesNotIn},
+			  []).
+%% ------------------------------------------------------------------------------
+
+%% Stops tracing where it is ongoing. Fetches all logfiles.
+stop_session(SID,Dir,Prefix) ->
+    gen_server:call(SID,{stop_session,Dir,Prefix}).
+%% ------------------------------------------------------------------------------
+
+%% stop_session(SID) = ok
+%%
+%% Cancels the session brutaly. All runtime components are made to stop tracing,
+%% all local log files are removed using the tracerdata we know for them.
+cancel_session(SID) ->
+    gen_server:call(SID,cancel_session).
+%% ------------------------------------------------------------------------------
+
+%% reactivate(SID) = {ok,
+%% reactivate(SID,Nodes) = {ok,NodeResults} | {error,Reason}.
+%%   SID=session id, pid().
+%%   Nodes=[Node,...]
+%%   NodeResult=[{Node,Result},...]
+%%   Result={Good,Bad}
+%%   Good,Bad=integer(), the number of redone activities.
+%%
+%% Function which reactivates runtime components being suspended. This is done
+%% replaying all trace flags (in the correct order) to the corresponding nodes.
+%% Note that this may also mean turning flags off. Like first turning them on
+%% then off a split second later.
+reactivate(SID) ->
+    gen_server:call(SID,reactivate). %% NOT IMPLEMENTED YET.
+reactivate(SID,Nodes) ->
+    gen_server:call(SID,{reactivate,Nodes}).
+%% ------------------------------------------------------------------------------
+
+
+%% tpl(SessionID,Mod,Func,Arity,MS)=
+%% tpl(SessionID,Mod,Func,Arity,MS,Opts)={ok,N}|{error,Reason}.
+%% tpl(SessionID,Nodes,Mod,Func,Arity,MS)=
+%% tpl(SessionID,Nodes,Mod,Func,Arity,MS,Opts)={ok,Result}|{error,Reason}
+%%   Mod='_' | ModuleName | ModRegExp | {DirRegExp,ModRegExp}
+%%     ModRegExp=DirRegExp= string()
+%%   Func='_' | FunctionName
+%%   Arity='_' | integer()
+%%   MS=[] | false | a match specification
+%%   Opts=[Opts,...]
+%%     Opt={arg,Arg}, disable_safety, {expand_regexp_at,NodeName}, only_loaded
+%%   Nodes=[NodeName,...]
+tpl(SID,Mod,Func,Arity,MS) ->
+    gen_server:call(SID,{tp,tpl,Mod,Func,Arity,MS,[]}).
+tpl(SID,Mod,Func,Arity,MS,Opts) when list(MS);MS==true;MS==false ->
+    gen_server:call(SID,{tp,tpl,Mod,Func,Arity,MS,Opts});
+tpl(SID,Nodes,Mod,Func,Arity,MS) when integer(Arity);Arity=='_' ->
+    gen_server:call(SID,{tp,tpl,Nodes,Mod,Func,Arity,MS,[]}).
+tpl(SID,Nodes,Mod,Func,Arity,MS,Opts) ->
+    gen_server:call(SID,{tp,tpl,Nodes,Mod,Func,Arity,MS,Opts}).
+%% ------------------------------------------------------------------------------
+
+%% ctpl(SessionID,Nodes,Mod,Func,Arity)=
+%% See tpl/X for arguments.
+%%
+%% Removes local trace-patterns from functions.
+ctpl(SID,Nodes,Mod,Func,Arity) ->
+    gen_server:call(SID,{ctp,ctpl,Nodes,Mod,Func,Arity}).
+%% ------------------------------------------------------------------------------
+
+
+tpm_localnames(SID,Nodes) ->
+    gen_server:call(SID,{tpm_localnames,Nodes}).
+
+%% tpm_globalnames(SID,Nodes) ->
+%%     gen_server:call(SID,{tpm_globalnames,Nodes}).
+
+init_tpm(SID,Nodes,Mod,Func,Arity,CallFunc) ->
+    gen_server:call(SID,{init_tpm,Nodes,Mod,Func,Arity,CallFunc}).
+init_tpm(SID,Nodes,Mod,Func,Arity,InitFunc,CallFunc,ReturnFunc,RemoveFunc) ->
+    gen_server:call(SID,
+		    {init_tpm,Nodes,Mod,Func,Arity,InitFunc,CallFunc,ReturnFunc,RemoveFunc}).
+tpm(SID,Nodes,Mod,Func,Arity,MS) ->
+    gen_server:call(SID,{tpm,Nodes,Mod,Func,Arity,MS}).
+tpm(SID,Nodes,Mod,Func,Arity,MS,CallFunc) ->
+    gen_server:call(SID,{tpm,Nodes,Mod,Func,Arity,MS,CallFunc}).
+tpm(SID,Nodes,Mod,Func,Arity,MS,InitFunc,CallFunc,ReturnFunc,RemoveFunc) ->
+    gen_server:call(SID,{tpm,Nodes,Mod,Func,Arity,MS,InitFunc,CallFunc,ReturnFunc,RemoveFunc}).
+
+tpm_ms(SID,Nodes,Mod,Func,Arity,MSname,MS) ->
+    gen_server:call(SID,{tpm_ms,Nodes,Mod,Func,Arity,MSname,MS}).
+
+ctpm_ms(SID,Nodes,Mod,Func,Arity,MSname) ->
+    gen_server:call(SID,{tpm_ms,Nodes,Mod,Func,Arity,MSname}).
+
+ctpm(SID,Nodes,Mod,Func,Arity) ->
+    gen_server:call(SID,{ctpm,Nodes,Mod,Func,Arity}).
+%% ------------------------------------------------------------------------------
+
+
+%% tf(SessionID,Nodes,TraceConfList)=
+%%   TraceConfList=[{PidSpec,Flags},...]
+%%     PidSpec=pid()|atom()|all|new|existing
+%%     Flags=[Flag,...]
+tf(SID,TraceConfList) ->
+    gen_server:call(SID,{tf,TraceConfList}).
+tf(SID,Nodes,TraceConfList) ->
+    gen_server:call(SID,{tf,Nodes,TraceConfList}).
+%% ------------------------------------------------------------------------------
+
+
+get_loopdata(SID) ->
+    gen_server:call(SID,get_loopdata).
+%% ------------------------------------------------------------------------------
+
+%% ==============================================================================
+%% Genserver call-backs.
+%% ==============================================================================
+
+%% Initial function for the session handler process. The nodes participating in
+%% the session must previously have been added to our control component by the tool.
+%% The session handler first finds out the state/status of the specified runtime
+%% components, then it tries to initiate tracing on those where it is applicable.
+%% Note that a reply to the initial (tool)client is done from here instead from
+%% the tool-server.
+init({Parent,From,TracerData,CtrlPid,SafetyCatches,Dbg}) -> % The non-distributed case.
+    {ok,StateStatus}=init_rtcomponent_states([],void,CtrlPid,[?LOCAL_RUNTIME]),
+    case is_tool_internal_tracerdata(TracerData) of
+	false ->                             % We shall initiate local runtime.
+	    case inviso:init_tracing(TracerData) of
+		ok ->
+		    gen_server:reply(From,{ok,{self(),ok}}),
+		    {ok,mk_ld(Parent,
+			      void,
+			      CtrlPid,
+			      to_rtstates([{?LOCAL_RUNTIME,{tracing,?RUNNING},[]}]),
+			      [{?LOCAL_RUNTIME,TracerData}],
+			      [],
+			      SafetyCatches,
+			      Dbg)};
+		{error,Reason} ->            % It might have become suspended?!
+		    gen_server:reply(From,{error,Reason}),
+		    {ok,mk_ld(Parent,
+			      void,
+			      CtrlPid,
+			      to_rtstates([{?LOCAL_RUNTIME,StateStatus,[]}]),
+			      [{?LOCAL_RUNTIME,TracerData}],
+			      [],
+			      SafetyCatches,
+			      Dbg)}
+	    end;
+	true ->                              % We shall not pass this one on.
+	    gen_server:reply(From,{ok,{self(),ok}}), % Then it is ok.
+	    {ok,mk_ld(Parent,
+		      void,
+		      CtrlPid,
+		      to_rtstates([{?LOCAL_RUNTIME,StateStatus,[]}]),
+		      [],
+		      [?LOCAL_RUNTIME],
+		      SafetyCatches,
+		      Dbg)}
+    end;
+init({Parent,From,NodeParams,CtrlNode,CtrlPid,SafetyCatches,Dbg,NodesIn,NodesNotIn}) ->
+    case init_rtcomponent_states(NodeParams,CtrlNode,CtrlPid,NodesNotIn) of
+	{ok,States} ->                       % A list of {Node,{State,Status},Opts}.
+	    {NodeParams2,Nodes2}=remove_nodeparams(NodesIn,NodeParams),
+	    case inviso_tool_lib:inviso_cmd(CtrlNode,init_tracing,[NodeParams2]) of
+		{ok,Result} ->               % Resulted in state changes!
+		    RTStates=set_tracing_rtstates(to_rtstates(States),Result),
+		    ReplyValue=init_fix_resultnodes(NodesIn,Nodes2,Result),
+		    gen_server:reply(From,{ok,{self(),ReplyValue}}),
+		    {ok,mk_ld(Parent,CtrlNode,CtrlPid,RTStates,
+			      NodeParams2,Nodes2,SafetyCatches,Dbg)};
+		{error,Reason} ->            % Some general failure.
+		    inviso_tool_lib:inviso_cmd(CtrlNode,unsubscribe,[]),
+		    gen_server:reply(From,{error,{init_tracing,Reason}}),
+		    {stop,{init_tracing,Reason}};
+		What ->
+		    io:format("GOT:~n~w~n",[What]),
+		    exit(foo)
+	    end;
+	{error,Reason} ->                    % Unable to get the state/status.
+	    inviso_tool_lib:inviso_cmd(CtrlNode,unsubscribe,[]),
+	    gen_server:reply(From,{error,Reason}),
+	    {stop,{error,Reason}};
+	What ->
+	    io:format("GOT:~n~w~n",[What]),
+	    exit(foo)
+    end.
+%% ------------------------------------------------------------------------------
+
+%% To stop a session means stop the tracing and remove all local files on the
+%% runtime nodes. We do have a table with all tracer data and that is how we are
+%% going to recreate what files to remove.
+%% Since runtime components may actually change state when this procedure is
+%% on-going, we do not care! It is the state in the session handling process at
+%% the time of start of this procedure which is used.
+handle_call(cancel_session,_From,LD) ->
+    CtrlNode=get_ctrlnode_ld(LD),
+    RTStates=get_rtstates_ld(LD),
+    Dbg=get_dbg_ld(LD),
+    TracingNodes=get_all_tracing_nodes_rtstates(RTStates),
+    case stop_all_tracing(CtrlNode,Dbg,TracingNodes) of
+	ok->                                 % Hopefully all nodes are stopped now.
+	    AvailableNodes=get_all_available_nodes_rtstates(RTStates),
+	    TRDstorage=get_trdstorage_ld(LD),
+	    remove_all_local_logs(CtrlNode,TRDstorage,AvailableNodes,Dbg),
+	    {stop,normal,ok,LD};             % LD actually not correct now!
+	{error,Reason} ->                    % Some serious error when stop_tracing.
+	    {stop,normal,{error,Reason},LD}
+    end;
+%% ------------------------------------------------------------------------------
+
+%% *Stop all tracing on runtime components still tracing.
+%% *Copy all local log files to the collection directory.
+handle_call({stop_session,Dir,Prefix},_From,LD) ->
+    case check_directory_exists(Dir) of      % Check that this directory exists here.
+	true ->
+	    RTStates=get_rtstates_ld(LD),
+	    CtrlNode=get_ctrlnode_ld(LD),
+	    Dbg=get_dbg_ld(LD),
+	    TracingNodes=get_all_tracing_nodes_rtstates(RTStates),
+	    case stop_all_tracing(CtrlNode,Dbg,TracingNodes) of
+		ok ->                        % Hopefully no node is still tracing now.
+		    TRDstorage=get_trdstorage_ld(LD),
+		    AvailableNodes=get_all_available_nodes_rtstates(RTStates),
+		    {FailedNodes,FetchedFiles}=
+			transfer_logfiles(RTStates,CtrlNode,Dir,Prefix,
+					  TRDstorage,Dbg,AvailableNodes),
+		    RemoveNodes=             % We only delete local logs where fetch ok.
+			lists:filter(fun(N)->
+					     case lists:keysearch(N,1,FailedNodes) of
+						 {value,_} ->
+						     false;
+						 false ->
+						     true
+					     end
+				     end,
+				     AvailableNodes),
+		    remove_all_local_logs(CtrlNode,TRDstorage,RemoveNodes,Dbg),
+		    {stop,normal,{ok,{FailedNodes,FetchedFiles}},LD};
+		{error,Reason} ->            % Some general failure, quit.
+		    {stop,normal,{error,Reason},LD}
+	    end;
+	false ->                             % You specified a non-existing directory!
+	    {reply,{error,{faulty_dir,Dir}},LD}
+    end;
+%% ------------------------------------------------------------------------------
+
+handle_call({reactivate,Nodes},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    {OurNodes,OtherNodes}=
+	remove_nodes_not_ours(Nodes,get_all_session_nodes_rtstates(RTStates)),
+    CtrlNode=get_ctrlnode_ld(LD),
+    ACTstorage=get_actstorage_ld(LD),
+    case h_reactivate(CtrlNode,OurNodes,ACTstorage) of
+	{ok,Results} ->                      % A list of {Node,Result}.
+	    if
+		OtherNodes==[] ->            % Normal case, no non-session nodes.
+		    {reply,{ok,Results},LD};
+		true ->                      % Add error values for non-session nodes.
+		    {reply,
+		     {ok,
+		      lists:map(fun(N)->{N,{error,not_in_session}} end,OtherNodes)++
+		      Results},
+		     LD}
+	    end;
+	{error,Reason} ->                    % Then this error takes presidence.
+	    {reply,{error,Reason},LD}
+    end;
+%% ------------------------------------------------------------------------------
+
+%% Call-back for set trace-pattern for both global and local functions.
+handle_call({tp,PatternFunc,Mod,F,A,MS,Opts},_From,LD) ->
+    Reply=h_tp(all,PatternFunc,Mod,F,A,MS,Opts,LD), % For all active nodes in the session.
+    {reply,Reply,LD};
+handle_call({tp,PatternFunc,Nodes,Mod,F,A,MS,Opts},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    SNodes=get_all_session_nodes_rtstates(RTStates), % Notes belongoing to the session.
+    {Nodes2,FaultyNodes}=remove_nodes_not_ours(Nodes,SNodes),
+    Reply=h_tp(Nodes2,PatternFunc,Mod,F,A,MS,Opts,LD),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,FaultyNodes),
+    {reply,ErrorReply++Reply,LD};
+%% ------------------------------------------------------------------------------
+
+%% Call-back handling the removal of both local and global trace-patterns.
+%% NOT IMPLEMENTED YET.
+handle_call({ctp,PatternFunc,Nodes,Mod,F,A},_From,LD) ->
+    Reply=h_ctp(Nodes,PatternFunc,Mod,F,A,LD),
+    {reply,Reply,LD};
+%% ------------------------------------------------------------------------------
+
+handle_call({tpm_localnames,Nodes},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    OurNodes=get_all_session_nodes_rtstates(RTStates),
+    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
+    ACTstorage=get_actstorage_ld(LD),
+    {Reply,NewACTstorage}=
+	h_tpm_localnames(get_ctrlnode_ld(LD),Nodes2,RTStates,ACTstorage),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
+    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
+
+handle_call({init_tpm,Nodes,Mod,Func,Arity,CallFunc},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    OurNodes=get_all_session_nodes_rtstates(RTStates),
+    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
+    ACTstorage=get_actstorage_ld(LD),
+    {Reply,NewACTstorage}=
+	h_all_tpm(get_ctrlnode_ld(LD),
+		  Nodes2,
+		  init_tpm,
+		  [Mod,Func,Arity,CallFunc],
+		  RTStates,
+		  ACTstorage),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
+    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
+
+handle_call({init_tpm,Nodes,Mod,Func,Arity,InitFunc,CallFunc,ReturnFunc,RemoveFunc},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    OurNodes=get_all_session_nodes_rtstates(RTStates),
+    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
+    ACTstorage=get_actstorage_ld(LD),
+    {Reply,NewACTstorage}=
+	h_all_tpm(get_ctrlnode_ld(LD),
+		  Nodes2,
+		  init_tpm,
+		  [Mod,Func,Arity,InitFunc,CallFunc,ReturnFunc,RemoveFunc],
+		  RTStates,
+		  ACTstorage),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
+    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
+
+handle_call({tpm,Nodes,Mod,Func,Arity,MS},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    OurNodes=get_all_session_nodes_rtstates(RTStates),
+    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
+    ACTstorage=get_actstorage_ld(LD),
+    {Reply,NewACTstorage}=
+	h_all_tpm(get_ctrlnode_ld(LD),Nodes2,tpm,[Mod,Func,Arity,MS],RTStates,ACTstorage),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
+    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
+
+handle_call({tpm,Nodes,Mod,Func,Arity,MS,CallFunc},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    OurNodes=get_all_session_nodes_rtstates(RTStates),
+    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
+    ACTstorage=get_actstorage_ld(LD),
+    {Reply,NewACTstorage}=
+	h_all_tpm(get_ctrlnode_ld(LD),
+		  Nodes2,
+		  tpm,
+		  [Mod,Func,Arity,MS,CallFunc],
+		  RTStates,
+		  ACTstorage),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
+    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
+
+handle_call({tpm,Nodes,Mod,Func,Arity,MS,InitFunc,CallFunc,ReturnFunc,RemoveFunc},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    OurNodes=get_all_session_nodes_rtstates(RTStates),
+    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
+    ACTstorage=get_actstorage_ld(LD),
+    {Reply,NewACTstorage}=
+	h_all_tpm(get_ctrlnode_ld(LD),
+		  Nodes2,
+		  tpm,
+		  [Mod,Func,Arity,MS,InitFunc,CallFunc,ReturnFunc,RemoveFunc],
+		  RTStates,
+		  ACTstorage),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
+    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
+
+handle_call({tpm_ms,Nodes,Mod,Func,Arity,MSname,MS},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    OurNodes=get_all_session_nodes_rtstates(RTStates),
+    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
+    ACTstorage=get_actstorage_ld(LD),
+    {Reply,NewACTstorage}=
+	h_all_tpm(get_ctrlnode_ld(LD),
+		  Nodes2,
+		  tpm_ms,
+		  [Mod,Func,Arity,MSname,MS],
+		  RTStates,
+		  ACTstorage),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
+    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
+
+handle_call({ctpm_ms,Nodes,Mod,Func,Arity,MSname},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    OurNodes=get_all_session_nodes_rtstates(RTStates),
+    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
+    ACTstorage=get_actstorage_ld(LD),
+    {Reply,NewACTstorage}=
+	h_all_tpm(get_ctrlnode_ld(LD),
+		  Nodes2,
+		  ctpm_ms,
+		  [Mod,Func,Arity,MSname],
+		  RTStates,
+		  ACTstorage),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
+    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
+
+handle_call({ctpm,Nodes,Mod,Func,Arity},_From,LD) ->
+    RTStates=get_rtstates_ld(LD),
+    OurNodes=get_all_session_nodes_rtstates(RTStates),
+    {Nodes2,NotOurNodes}=remove_nodes_not_ours(Nodes,OurNodes),
+    ACTstorage=get_actstorage_ld(LD),
+    {Reply,NewACTstorage}=
+	h_all_tpm(get_ctrlnode_ld(LD),Nodes2,ctpm,[Mod,Func,Arity],RTStates,ACTstorage),
+    ErrorReply=lists:map(fun(N)->{N,{error,not_in_session}} end,NotOurNodes),
+    {reply,ErrorReply++Reply,put_actstorage_ld(NewACTstorage,LD)};
+%% ------------------------------------------------------------------------------
+
+%% Call-back for setting process trace-flags. Handles both distributed and non-
+%% distributed case.
+handle_call({tf,TraceConfList},From,LD) ->
+    handle_call({tf,all,TraceConfList},From,LD);
+handle_call({tf,Nodes,TraceConfList},_From,LD) ->
+    {Reply,NewACTstorage}=h_tf(get_ctrlnode_ld(LD),
+			      Nodes,
+			      TraceConfList,
+			      get_actstorage_ld(LD),
+			      get_rtstates_ld(LD)),
+    {reply,Reply,put_actstorage_ld(NewACTstorage,LD)};
+%% ------------------------------------------------------------------------------
+
+
+
+handle_call(get_loopdata,_From,LD) ->
+    io:format("The loopdata:~n~p~n",[LD]),
+    {reply,ok,LD}.
+%% ------------------------------------------------------------------------------
+
+
+%% Clause handling an incomming state-change event from the control component.
+%% Note that it does not have to be one of our nodes since it is not possible
+%% to subscribe to certain node-events.
+%% We may very well get state-change events for state-changes we are the source
+%% to our selves. Those state-changes are already incorporated into the RTStates.
+%% There is however no harm in doing them again since we know that this event
+%% message will reach us before a reply to a potentially following state-change
+%% request will reach us. Hence we will do all state-changes in the correct order,
+%% even if sometimes done twice.
+handle_info({trace_event,CtrlPid,_Time,{state_change,Node,{State,Status}}},LD) ->
+    case get_ctrlpid_ld(LD) of
+	CtrlPid ->                           % It is from our control component.
+	    case {State,Status} of
+		{?TRACING,?RUNNING} ->       % This is the only case when new tracerdata!
+		    NewTracerData=add_current_tracerdata_ld(get_ctrlnode_ld(LD),
+							    Node,
+							    get_rtstates_ld(LD),
+							    get_trdstorage_ld(LD)),
+		    NewRTStates=statechange_rtstates(Node,State,Status,get_rtstates_ld(LD)),
+		    {noreply,put_trdstorage_ld(NewTracerData,
+					       put_rtstates_ld(NewRTStates,LD))};
+		_ ->                         % In all other cases, just fix rtstates.
+		    NewRTStates=statechange_rtstates(Node,State,Status,get_rtstates_ld(LD)),
+		    {noreply,put_rtstates_ld(NewRTStates,LD)}
+	    end;
+	_ ->
+	    {noreply,LD}
+    end;
+%% If a new runtime component connects to our trace control component, and it is
+%% in our list of runtime components belonging to this session, we may update its
+%% state to now being present. Otherwise it does not belong to this session.
+%% Note that we avoid updating an already connected runtime component. This
+%% can happend if it connected by itself after we started the session handler,
+%% but before we managed to initiate tracing. Doing so or not will not result in
+%% any error in the long run, but during a short period of time we might be
+%% prevented from doing things with the runtime though it actually is tracing.
+handle_info({trace_event,CtrlPid,_Time,{connected,Node,{_Tag,{State,Status}}}},LD) ->
+    case get_ctrlpid_ld(LD) of
+	CtrlPid ->                           % It is from our control component.
+	    case get_statestatus_rtstates(Node,get_rtstates_ld(LD)) of
+		{ok,unavailable} ->          % This is the situation when we update!
+		    NewRTStates=statechange_rtstates(Node,State,Status,get_rtstates_ld(LD)),
+		    {noreply,put_rtstates_ld(NewRTStates,LD)};
+		_ ->                         % In all other cases, let it be.
+		    {noreply,LD}
+	    end;
+	_ ->                                 % Not from our control component.
+	    {noreply,LD}
+    end;
+%% If a runtime component disconnects we mark it as unavailable. We must also
+%% remove all saved trace-flags in order for them to not be accidently reactivated
+%% should the runtime component reconnect and then suspend.
+handle_info({trace_event,CtrlPid,_Time,{disconnected,Node,_}},LD) ->
+    case get_ctrlpid_ld(LD) of
+	CtrlPid ->                           % It is from our control component.
+	    NewRTStates=set_unavailable_rtstates(Node,get_rtstates_ld(LD)),
+	    NewACTstorage=del_node_actstorage(Node,get_actstorage_ld(LD)),
+	    {noreply,put_actstorage_ld(NewACTstorage,put_rtstates_ld(NewRTStates,LD))};
+	_ ->
+	    {noreply,LD}
+    end;
+handle_info(_,LD) ->
+    {noreply,LD}.
+%% ------------------------------------------------------------------------------
+
+%% In terminate we cancel our subscription to event from the trace control component.
+%% That should actually not be necessary, but lets do it the correct way!
+terminate(_,LD) ->
+    case get_ctrlnode_ld(LD) of
+	void ->                              % Non-distributed.
+	    inviso:unsubscribe();
+	Node ->
+	    inviso_tool_lib:inviso_cmd(Node,unsubscribe,[])
+    end.
+%% ------------------------------------------------------------------------------
+
+
+
+%% ==============================================================================
+%% First level help functions to call-backs.
+%% ==============================================================================
+
+%% ------------------------------------------------------------------------------
+%% Help functions to init.
+%% ------------------------------------------------------------------------------
+
+%% Help function which find out the state/status of the runtime components.
+%% Note that since we have just started subscribe to state changes we must
+%% check our inqueue to see that we have no waiting messages for the nodes
+%% we learned the state/status of. If there is a waiting message we don't
+%% know whether that was a state change received before or after the state
+%% check was done. We will then redo the state-check.
+%% Returns {ok,States} or {error,Reason}.
+%% Where States is [{Node,{State,Status},Opts},...].
+%% Note that {error,Reason} can not occur in the non-distributed case.
+init_rtcomponent_states(NodeParams,void,CtrlPid,Nodes) -> % The non-distributed case.
+    ok=inviso:subscribe(),
+    init_rtcomponent_states_2(NodeParams,void,CtrlPid,Nodes,[]);
+init_rtcomponent_states(NodeParams,CtrlNode,CtrlPid,Nodes) ->
+    ok=inviso_tool_lib:inviso_cmd(CtrlNode,subscribe,[]),
+    init_rtcomponent_states_2(NodeParams,CtrlNode,CtrlPid,Nodes,[]).
+
+init_rtcomponent_states_2(_,_,_,[],States) ->
+    {ok,States};
+init_rtcomponent_states_2(NodeParams,void,CtrlPid,_Nodes,States) ->
+    case inviso:get_status() of
+	{ok,StateStatus} ->                  % Got its state/status, now...
+	    {ProblemNodes,NewStates}=
+		init_rtcomponent_states_3(NodeParams,CtrlPid,[{?LOCAL_RUNTIME,{ok,StateStatus}}],
+					  [],States),
+	    init_rtcomponent_states_2(NodeParams,void,CtrlPid,ProblemNodes,NewStates);
+	{error,_Reason} ->                   % The runtime is not available!?
+	    {ok,[{?LOCAL_RUNTIME,unavailable,[]}]} % Create the return value immediately.
+    end;
+init_rtcomponent_states_2(NodeParams,CtrlNode,CtrlPid,Nodes,States) ->
+    case inviso_tool_lib:inviso_cmd(CtrlNode,get_status,[Nodes]) of
+	{ok,NodeResult} ->
+	    {ProblemNodes,NewStates}=
+		init_rtcomponent_states_3(NodeParams,CtrlPid,NodeResult,[],States),
+	    init_rtcomponent_states_2(NodeParams,CtrlNode,CtrlPid,ProblemNodes,NewStates);
+	{error,Reason} ->                    % Severe problem, abort the session.
+	    {error,{get_status,Reason}}
+    end.
+
+%% Traverses the list of returnvalues and checks that we do not have an event
+%% waiting in the message queue. If we do have, it is a problem. That node will
+%% be asked about its state again.
+%% Note that it is here we construct the RTStatesList.
+init_rtcomponent_states_3(NodeParams,CtrlPid,[{Node,{ok,{State,Status}}}|Rest],Problems,States) ->
+    receive
+	{trace_event,CtrlPid,_Time,{state_change,Node,_}} ->
+	    init_rtcomponent_states_3(NodeParams,CtrlPid,Rest,[Node|Problems],States)
+    after
+	0 ->                                 % Not in msg queue, then we're safe!
+	    RTState=case lists:keysearch(Node,1,NodeParams) of
+			{value,{_Node,_TracerData,Opts}} ->
+			    {Node,{State,Status},Opts};
+			_ ->                 % No option available, use [].
+			    {Node,{State,Status},[]}
+		    end,
+	    init_rtcomponent_states_3(NodeParams,CtrlPid,Rest,Problems,[RTState|States])
+    end;
+init_rtcomponent_states_3(NodeParams,CtrlPid,[{Node,{error,_Reason}}|Rest],Problems,States) ->
+    RTState=case lists:keysearch(Node,1,NodeParams) of
+			{value,{_Node,_TracerData,Opts}} ->
+			    {Node,unavailable,Opts};
+			_ ->                 % No option available, use [].
+			    {Node,unavailable,[]}
+		    end,
+    init_rtcomponent_states_3(NodeParams,CtrlPid,Rest,Problems,[RTState|States]);
+init_rtcomponent_states_3(_,_,[],Problems,States) ->
+    {Problems,States}.
+%% ------------------------------------------------------------------------------
+
+%% Help function removing nodes from NodeParams. The reason for this can either
+%% be that we are using a tool internal tracerdata that shall not be forwarded to
+%% the trace control component, or that the node is actually already part of
+%% another session.
+%% Returns {NewNodeParams,NodesWhichShallNotBeInitiated}.
+remove_nodeparams(Nodes,NodesParams) ->
+    remove_nodeparams_2(Nodes,NodesParams,[],[]).
+
+remove_nodeparams_2(Nodes,[NodeParam|Rest],NPAcc,NAcc) when  % NPAcc=NodeParamsAcc.
+  (is_tuple(NodeParam) and ((size(NodeParam)==2) or (size(NodeParam)==3))) ->
+    Node=element(1,NodeParam),
+    Params=element(2,NodeParam),             % This is tracerdata!
+    case lists:member(Node,Nodes) of
+	true ->                              % Remove this one, in another session.
+	    remove_nodeparams_2(Nodes,Rest,NPAcc,NAcc);
+	false ->                             % Ok so far...
+	    case is_tool_internal_tracerdata(Params) of
+		false ->                     % Then keep it and use it later!
+		    remove_nodeparams_2(Nodes,Rest,[{Node,Params}|NPAcc],NAcc);
+		true ->                      % Since it is, remove it from the list.
+		    remove_nodeparams_2(Nodes,Rest,NPAcc,[Node|NAcc])
+	    end
+    end;
+remove_nodeparams_2(Nodes,[_|Rest],NPAcc,NAcc) -> % Faulty NodeParam, skip it!
+    remove_nodeparams_2(Nodes,Rest,NPAcc,NAcc);
+remove_nodeparams_2(_,[],NPAcc,NAcc) ->
+    {lists:reverse(NPAcc),NAcc}.
+%% ------------------------------------------------------------------------------
+
+%% Help function which adds both the nodes which were already part of another
+%% session and the nodes that we actually did not issue any init_tracing for.
+%% Returns a new Result list of [{Node,NodeResult},...].
+init_fix_resultnodes(NodesOtherSes,NodesNotInit,Result) ->
+    NewResult=init_fix_resultnodes_2(NodesOtherSes,{error,in_other_session},Result),
+    init_fix_resultnodes_2(NodesNotInit,ok,NewResult).
+
+init_fix_resultnodes_2([Node|Rest],NodeResult,Result) ->
+    [{Node,NodeResult}|init_fix_resultnodes_2(Rest,NodeResult,Result)];
+init_fix_resultnodes_2([],_,Result) ->
+    Result.                                  % Append Result to the end of the list.
+%% ------------------------------------------------------------------------------
+
+
+%% ------------------------------------------------------------------------------
+%% Help functions to reactivate.
+%% ------------------------------------------------------------------------------
+
+h_reactivate(CtrlNode,Nodes,ACTstorage) ->   % Distributed case.
+    case inviso_tool_lib:inviso_cmd(CtrlNode,cancel_suspension,[Nodes]) of
+	{ok,CSuspResults} ->
+	    {GoodNodes,BadResults}=          % Sort out nodes no longer suspended.
+		lists:foldl(fun({Node,ok},{GoodNs,BadNs})->
+				    {[Node|GoodNs],BadNs};
+			       ({Node,{error,Reason}},{GoodNs,BadNs})->
+				    {GoodNs,[{Node,{error,{cancel_suspension,Reason}}}|BadNs]}
+			    end,
+			    {[],[]},
+			    CSuspResults),
+	    Results=h_reactivate_redo_activity(CtrlNode,GoodNodes,ACTstorage,[]),
+	    {ok,BadResults++Results};
+	{error,Reason} ->                    % General failure cancelling suspend.
+	    {error,{cancel_suspension,Reason}}
+    end.
+%% ------------------------------------------------------------------------------
+
+%% Help function which traverses the list of nodes known to be ours and have
+%% cancelled their suspend. If we fail redoing one of the activities associated
+%% with a node, the node will be reported in the return value as failed. From
+%% that point on its state must be considered unknown since we do not know how
+%% many of the activities were successfully redone.
+h_reactivate_redo_activity(CtrlNode,[Node|Rest],ACTstorage,Acc) ->
+    case get_activities_actstorage(Node,ACTstorage) of
+	{ok,Activities} ->                   % The node existed in activity storage.
+	    {Good,Bad}=h_reactivate_redo_activity_2(CtrlNode,Node,Activities,0,0),
+	    h_reactivate_redo_activity(CtrlNode,Rest,ACTstorage,[{Node,{Good,Bad}}|Acc]);
+	false ->                             % Node not present in activity storage.
+	    h_reactivate_redo_activity(CtrlNode,Rest,ACTstorage,[{Node,{0,0}}|Acc])
+    end;
+h_reactivate_redo_activity(_CtrlNode,[],_,Acc) ->
+    lists:reverse(Acc).
+
+%% Help function actually redoing the activity. Note that there must be one
+%% clause here for every type of activity.
+%% Returns {NrGoodCmds,NrBadCmds}.
+%% The number of good or bad commands refers to inviso commands done. If any
+%% of the subparts of such a command returned an error, the command is concidered
+%% no good.
+h_reactivate_redo_activity_2(CtrlNode,Node,[{tf,{Op,TraceConfList}}|Rest],Good,Bad) ->
+    case inviso_tool_lib:inviso_cmd(CtrlNode,Op,[[Node],TraceConfList]) of
+	{ok,[{_Node,{ok,Answers}}]} ->
+	    case h_reactivate_redo_activity_check_tf(Answers) of
+		ok ->
+		    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good+1,Bad);
+		error ->                     % At least oneReports the first encountered error.
+		    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1)
+	    end;
+	{ok,[{_Node,{error,_Reason}}]} ->
+	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1);
+	{error,_Reason} ->                   % General error when doing cmd.
+	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1)
+    end;
+h_reactivate_redo_activity_2(CtrlNode,Node,[{tpm,{Op,InvisoCmdParams}}|Rest],Good,Bad) ->
+    case inviso_tool_lib:inviso_cmd(CtrlNode,Op,[[Node]|InvisoCmdParams]) of
+	{ok,[{_Node,ok}]} ->
+	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good+1,Bad);
+	{ok,[{_Node,{error,_Reason}}]} ->
+	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1);
+	{error,_Reason} ->                   % General error when doing cmd.
+	    h_reactivate_redo_activity_2(CtrlNode,Node,Rest,Good,Bad+1)
+    end;
+h_reactivate_redo_activity_2(_CtrlNode,_Node,[],Good,Bad) ->
+    {Good,Bad}.
+
+%% Help function traversing a list of results from inviso:tf/2 or inviso:ctf/2
+%% to see if there were any errors.
+h_reactivate_redo_activity_check_tf([N|Rest]) when integer(N) ->
+    h_reactivate_redo_activity_check_tf(Rest);
+h_reactivate_redo_activity_check_tf([{error,_Reason}|_]) ->
+    error;
+h_reactivate_redo_activity_check_tf([]) ->
+    ok.
+%% ------------------------------------------------------------------------------
+
+
+%% ------------------------------------------------------------------------------
+%% Help functions to tp (setting trace patterns, both local and global).
+%% ------------------------------------------------------------------------------
+
+%% Help function which handles both tpl and tp. Note that the non-distributed case
+%% handled with Nodes='all'.
+%% Returns what shall be the reply to the client.
+h_tp(all,PatternFunc,Mod,F,A,MS,Opts,LD) ->  % All available runtime nodes.
+    Nodes=get_all_available_nodes_rtstates(get_rtstates_ld(LD)),
+    h_tp(Nodes,PatternFunc,Mod,F,A,MS,Opts,LD);
+h_tp(Nodes,PatternFunc,Mod,F,A,MS,Opts,LD) -> % Only certain nodes in the session.
+    CtrlNode=get_ctrlnode_ld(LD),
+    Dbg=get_dbg_ld(LD),
+    SafetyCatches=get_safetycatches_ld(LD),
+    case inviso_tool_lib:expand_module_names(Nodes,Mod,Opts) of % Take care of any reg-exps.
+	{multinode_expansion,NodeMods} ->
+	    NodeTPs=inviso_tool_lib:make_patterns(SafetyCatches,Opts,Dbg,NodeMods,F,A,MS),
+	    h_tp_node_by_node(CtrlNode,PatternFunc,Dbg,NodeTPs,[]);
+	{singlenode_expansion,Modules} ->
+	    TPs=inviso_tool_lib:make_patterns(SafetyCatches,Opts,Dbg,Modules,F,A,MS),
+	    h_tp_do_tps(CtrlNode,Nodes,TPs,PatternFunc,Dbg);
+	module ->
+	    TPs=inviso_tool_lib:make_patterns(SafetyCatches,Opts,Dbg,[Mod],F,A,MS),
+	    h_tp_do_tps(CtrlNode,Nodes,TPs,PatternFunc,Dbg);
+	wildcard ->                          % Means do for all modules, no safety.
+	    h_tp_do_tps(CtrlNode,Nodes,[{Mod,F,A,MS}],PatternFunc,Dbg);
+	{error,Reason} ->
+	    {error,Reason}
+    end.
+
+%% Note that this function can never be called in the non-distributed case.
+h_tp_node_by_node(CtrlNode,PatternFunc,Dbg,[{Node,TPs}|Rest],Accum) ->
+    case h_tp_do_tps(CtrlNode,[Node],TPs,PatternFunc,Dbg) of
+	{ok,[{Node,Result}]} ->
+	    h_tp_node_by_node(CtrlNode,PatternFunc,Dbg,Rest,[{Node,Result}|Accum]);
+	{error,Reason} ->                    % Failure, but don't stop.
+	    h_tp_node_by_node(CtrlNode,PatternFunc,Dbg,Rest,[{Node,{error,Reason}}|Accum])
+    end;
+h_tp_node_by_node(_,_,_,[],Accum) ->
+    {ok,lists:reverse(Accum)}.
+
+%% Help function which does the actual call to the trace control component.
+%% Note that Nodes can be a list of nodes (including a single one) or
+%% ?LOCAL_RUNTIME if we are not distributed. The non-distributed case is otherwise
+%% detected by the 'void' CtrlNode.
+%% Returns {ok,[{Node,{ok,{NrOfFunctions,NrOfErrors}}},{Node,{error,Reason}},...]} or
+%% {error,Reason}. In the non-distributed case {ok,{NrOfFunctions,NrOfErros}} or
+%% {error,Reason}.
+h_tp_do_tps(void,_Nodes,TPs,PatternFunc,Dbg) -> % Non distributed case!
+    inviso_tool_lib:debug(tp,Dbg,[TPs,PatternFunc]),
+    case inviso:PatternFunc(TPs) of
+	{ok,Result} ->                       % A list of [Nr1,Nr2,error,...].
+	    {ok,
+	     lists:foldl(fun(N,{AccNr,AccErr}) when integer(N) ->
+				 {AccNr+N,AccErr};
+			    (error,{AccNr,AccErr}) ->
+				 {AccNr,AccErr+1}
+			 end,
+			 {0,0},
+			 Result)};
+	{error,Reason} ->
+	    {error,{PatternFunc,Reason}}
+    end;
+h_tp_do_tps(CtrlNode,Nodes,TPs,PatternFunc,Dbg) ->
+    inviso_tool_lib:debug(tp,Dbg,[Nodes,TPs,PatternFunc]),
+    case inviso_tool_lib:inviso_cmd(CtrlNode,PatternFunc,[Nodes,TPs]) of
+	{ok,Result} ->                       % Result is [{Node,Result},...].
+	    {ok,
+	     lists:map(fun({Node,{ok,Res}})->
+			       {Node,lists:foldl(fun(N,{ok,{AccNr,AccErr}}) when integer(N) ->
+							 {ok,{AccNr+N,AccErr}};
+						    (error,{AccNr,AccErr}) ->
+							 {ok,{AccNr,AccErr+1}}
+						 end,
+						 {ok,{0,0}},
+						 Res)};
+			  ({_Node,{error,Reason}})->
+			       {error,Reason}
+		       end,
+		       Result)};
+	{error,Reason} ->
+	    {error,{PatternFunc,Reason}}
+    end.
+%% ------------------------------------------------------------------------------
+
+%% ------------------------------------------------------------------------------
+%% Help functions for removing trace-patterns.
+%% ------------------------------------------------------------------------------
+
+%% NOT IMPLEMENTED YET.
+h_ctp(Node,PatternFunc,Mod,F,A,LD) ->
+    tbd.
+%% ------------------------------------------------------------------------------
+
+
+%% ------------------------------------------------------------------------------
+%% Help functions for calling the trace information facility.
+%% ------------------------------------------------------------------------------
+
+
+%% Function handling the meta trace pattern for capturing registration of local
+%% process names.
+h_tpm_localnames(CtrlNode,Nodes,RTStates,ACTstorage) ->
+    AvailableNodes=get_all_available_nodes_rtstates(RTStates),
+    {Nodes3,FaultyNodes}=remove_nodes_not_ours(Nodes,AvailableNodes),
+    case inviso_tool_lib:inviso_cmd(CtrlNode,tpm_localnames,[Nodes3]) of
+	{ok,Result} ->                       % That good we want to modify tpmstorage!
+	    NewACTstorage=add_tpm_actstorage(Result,tpm_localnames,[],ACTstorage),
+	    ErrorResult=lists:map(fun(N)->{N,{error,not_available}} end,FaultyNodes),
+	    {{ok,ErrorResult++Result},NewACTstorage};
+	{error,Reason} ->                    % If general failure, do not modify storage.
+	    {{error,Reason},ACTstorage}
+    end.
+%% ------------------------------------------------------------------------------
+
+%% Functions calling meta trace functions for specified nodes. This function is
+%% intended for use with all tmp function calls, init_tpm,tpm,tpm_ms,ctpm_ms and
+%% ctpm.
+%% Note that we must store called meta trace functions and their parameters in the
+%% activity storage in order to be able to redo them in case of a reactivate.
+h_all_tpm(CtrlNode,Nodes,TpmCmd,InvisoCmdParams,RTStates,ACTstorage) ->
+    AvailableNodes=get_all_available_nodes_rtstates(RTStates),
+    {Nodes3,FaultyNodes}=remove_nodes_not_ours(Nodes,AvailableNodes),
+    case inviso_tool_lib:inviso_cmd(CtrlNode,TpmCmd,[Nodes3|InvisoCmdParams]) of
+	{ok,Result} ->                       % That good we want to modify tpmstorage!
+	    NewACTstorage=add_tpm_actstorage(Result,TpmCmd,InvisoCmdParams,ACTstorage),
+	    ErrorResult=lists:map(fun(N)->{N,{error,not_available}} end,FaultyNodes),
+	    {{ok,ErrorResult++Result},NewACTstorage};
+	{error,Reason} ->                    % If general failure, do not modify storage.
+	    {{error,Reason},ACTstorage}
+    end.
+%% ------------------------------------------------------------------------------
+
+
+%% ------------------------------------------------------------------------------
+%% Help functions for set trace flags.
+%% ------------------------------------------------------------------------------
+
+%% Help function which sets the tracepatterns in TraceConfList for all nodes
+%% mentioned in Nodes. Note that non-distributed case is handled with Nodes='all'.
+%% Returns {Reply,NewACTstorage} where Reply is whatever shall be returned to caller
+%% and NewACTstorage is traceflag storage modified with the flags added to the
+%% corresponding nodes.
+h_tf(void,_Nodes,TraceConfList,ACTstorage,_RTStates) -> % The non-distributed case.
+    Reply=inviso:tf(TraceConfList),
+    NewACTstorage=add_tf_actstorage([{?LOCAL_RUNTIME,Reply}],tf,TraceConfList,ACTstorage),
+    {Reply,NewACTstorage};
+h_tf(CtrlNode,all,TraceConfList,ACTstorage,RTStates) ->
+    AllNodes=get_all_session_nodes_rtstates(RTStates),
+    h_tf(CtrlNode,AllNodes,TraceConfList,ACTstorage,RTStates);
+h_tf(CtrlNode,Nodes,TraceConfList,ACTstorage,_RTStates) ->
+    case inviso_tool_lib:inviso_cmd(CtrlNode,tf,[Nodes,TraceConfList]) of
+	{ok,Result} ->                       % That good we want to modify actstorage!
+	    NewACTstorage=add_tf_actstorage(Result,tf,TraceConfList,ACTstorage),
+	    {{ok,Result},NewACTstorage};
+	{error,Reason} ->                    % If general failure, do not modify actstorage.
+	    {{error,Reason},ACTstorage}
+    end.
+%% ------------------------------------------------------------------------------
+
+%% ------------------------------------------------------------------------------
+%% Help functions to stop_session.
+%% ------------------------------------------------------------------------------
+
+%% This function fetches all local log-files using our stored tracerdata. Note
+%% that there are two major ways of tranfering logfiles. Either via distributed
+%% Erlang or by common filesystem (like NFS). The default is distributed Erlang.
+%% But there may be info in the RTStates structure about a common file-system.
+%% Returns {FailedNodes,FetchedFileNames} where FailedNodes is a list of
+%% nodenames where problems occurred. Note that problems does not necessarily
+%% mean that no files were copied.
+%% FetchedFileNames contains one or two of the tuples {trace_log,Files} and/or
+%% {ti_log,Files}, listing all files successfully fetched. Note that the
+%% list of fetched files contains sublists of filenames. One for each node and
+%% tracerdata.
+%% In the non-distributed system we always use copy (since the files always
+%% resides locally).
+transfer_logfiles(RTStates,CtrlNode,Dir,Prefix,TRDstorage,Dbg,AvailableNodes) ->
+    if
+	CtrlNode==void ->                    % When non-distributed, always copy!
+		fetch_logfiles_copy(CtrlNode,Dir,Prefix,TRDstorage,Dbg,[?LOCAL_RUNTIME]);
+	true ->                              % The distributed case.
+	    {FetchNodes,CopyNodes}=find_logfile_transfer_methods(AvailableNodes,RTStates),
+	    {FailedFetchNodes,FetchedFiles}=
+		case fetch_logfiles_distributed(CtrlNode,Dir,Prefix,TRDstorage,Dbg,FetchNodes) of
+		    {ok,Failed,Files} ->     % So far no disasters.
+			{Failed,Files};
+		    {error,Reason} ->        % Means all fetch-nodes failed!
+			inviso_tool_lib:debug(transfer_logfiles,Dbg,[FetchNodes,Reason]),
+			{lists:map(fun(N)->{N,error} end,FetchNodes),[]}
+		end,
+	    {FailedCopyNodes,CopiedFiles}=
+		fetch_logfiles_copy(CtrlNode,Dir,Prefix,TRDstorage,Dbg,CopyNodes),
+	    {FailedFetchNodes++FailedCopyNodes,FetchedFiles++CopiedFiles}
+    end.
+
+%% Help function which finds out which node we have a common file system with
+%% and from which we must make distributed erlang tranfere.
+%% Returns {DistributedNodes,CopyNodes} where CopyNode is [{Node,CopyFromDir},...].
+find_logfile_transfer_methods(Nodes,RTStates) ->
+    find_logfile_transfer_methods_2(Nodes,RTStates,[],[]).
+
+find_logfile_transfer_methods_2([Node|Rest],RTStates,FetchAcc,CopyAcc) ->
+    {ok,Opts}=get_opts_rtstates(Node,RTStates), % Node must be in RTStates!
+    case lists:keysearch(?COPY_LOG_FROM,1,Opts) of
+	{value,{_,FromDir}} when list(FromDir) -> % Node has common filesystem.
+	    find_logfile_transfer_methods_2(Rest,RTStates,FetchAcc,[{Node,FromDir}|CopyAcc]);
+	{value,_} ->                         % Can't understand dir option.
+	    find_logfile_transfer_methods_2(Rest,RTStates,[Node|FetchAcc],CopyAcc);
+	false ->                             % Then we want to use fetch instead.
+	    find_logfile_transfer_methods_2(Rest,RTStates,[Node|FetchAcc],CopyAcc)
+    end;
+find_logfile_transfer_methods_2([],_,FetchAcc,CopyAcc) ->
+    {FetchAcc,CopyAcc}.
+%% ------------------------------------------------------------------------------
+
+%% Help function which transferes all local logfiles according to the tracerdata
+%% stored for the nodes in Nodes.
+%% Returns {ok,FailedNodes,FileNodeSpecs} or {error,Reason}.
+%% FailedNodes is a list of nodes where fetching logs did not succeed, partially
+%% or not at all.
+%% FileNames is a list of list of actually fetched files (the name as it is here, including
+%% Dir). The sublists are files which belong together.
+fetch_logfiles_distributed(CtrlNode,Dir,Prefix,TRDstorage,Dbg,Nodes) ->
+    LogSpecList=build_logspeclist(Nodes,TRDstorage),
+    case inviso_fetch_log(inviso_tool_lib:inviso_cmd(CtrlNode,
+						     fetch_log,
+						     [LogSpecList,Dir,Prefix])) of
+	{ok,Result} ->
+	    Files=get_all_filenames_fetchlog_result(Result,Dbg),
+	    FailedNodes=get_all_failednodes_fetchlog_result(Result),
+	    {ok,FailedNodes,Files};
+	{error,Reason} ->                    % Some general failure!
+	    {error,{fetch_log,Reason}}
+    end.
+
+%% Help function which constructs a list {Node,TracerData} for all nodes in Nodes.
+%% Note that there may be more than one tracerdata for a node, resulting in multiple
+%% tuples for that node.
+build_logspeclist(Nodes,TRDstorage) ->
+    build_logspeclist_2(Nodes,TRDstorage,[]).
+
+build_logspeclist_2([Node|Rest],TRDstorage,Acc) ->
+    TRDlist=find_tracerdata_for_node_trd(Node,TRDstorage), % A list of all tracerdata.
+    build_logspeclist_2(Rest,
+			TRDstorage,
+			[lists:map(fun(TRD)->{Node,TRD} end,TRDlist)|Acc]);
+build_logspeclist_2([],_,Acc) ->
+    lists:flatten(Acc).
+
+%% Help function which translates inviso:fetch_log return values to what I
+%% want!
+inviso_fetch_log({error,Reason}) ->
+    {error,Reason};
+inviso_fetch_log({_Success,ResultList}) ->
+    {ok,ResultList}.
+
+%% Help function which collects all filenames mentioned in a noderesult structure.
+%% The files may or may not be complete.
+%% Returns a list of list of filenames. Each sublist contains files which belong
+%% together, i.e because they are a wrap-set.
+get_all_filenames_fetchlog_result(NodeResult,Dbg) ->
+    get_all_filenames_fetchlog_result_2(NodeResult,Dbg,[]).
+
+get_all_filenames_fetchlog_result_2([{Node,{Success,FileInfo}}|Rest],Dbg,Accum) 
+  when Success=/=error, list(FileInfo) ->
+    SubAccum=get_all_filenames_fetchlog_result_3(FileInfo,[]),
+    get_all_filenames_fetchlog_result_2(Rest,Dbg,[{Node,SubAccum}|Accum]);
+get_all_filenames_fetchlog_result_2([{Node,{error,FReason}}|Rest],Dbg,Accum) ->
+    inviso_tool_lib:debug(fetch_files,Dbg,[Node,FReason]),
+    get_all_filenames_fetchlog_result_2(Rest,Dbg,Accum);
+get_all_filenames_fetchlog_result_2([],_Dbg,Accum) ->
+    Accum.
+
+get_all_filenames_fetchlog_result_3([{FType,Files}|Rest],SubAccum) ->
+    FilesOnly=lists:foldl(fun({ok,FName},Acc)->[FName|Acc];(_,Acc)->Acc end,[],Files),
+    get_all_filenames_fetchlog_result_3(Rest,[{FType,FilesOnly}|SubAccum]);
+get_all_filenames_fetchlog_result_3([],SubAccum) ->
+    SubAccum.		  
+
+%% Help function which traverses a noderesult and builds a list as return
+%% value containing the nodenames of all nodes not being complete.
+%% Note that a node may occur multiple times since may have fetched logfiles
+%% for several tracerdata from the same node. Makes sure the list contains
+%% unique node names.
+%% Returns a list nodes.
+get_all_failednodes_fetchlog_result(NodeResult) ->
+    get_all_failednodes_fetchlog_result_2(NodeResult,[]).
+
+get_all_failednodes_fetchlog_result_2([{_Node,{complete,_}}|Rest],Acc) ->
+    get_all_failednodes_fetchlog_result_2(Rest,Acc);
+get_all_failednodes_fetchlog_result_2([{Node,{_Severity,_}}|Rest],Acc) ->
+    case lists:member(Node,Acc) of
+	true ->                              % Already in the list.
+	    get_all_failednodes_fetchlog_result_2(Rest,Acc);
+	false ->                             % Not in Acc, add it!
+	    get_all_failednodes_fetchlog_result_2(Rest,[Node|Acc])
+    end;
+get_all_failednodes_fetchlog_result_2([],Acc) ->
+    Acc.
+%% ------------------------------------------------------------------------------
+
+%% Help function which copies files from one location to Dir and at the same time
+%% adds the Prefix to the filename. NodeSpecs contains full path to the files. The
+%% reason the node information is still part of NodeSpecs is that otherwise we can
+%% not report faulty nodes. Note that one node may occur multiple times since there
+%% may be more than one tracerdata for a node.
+%% Returns {FailedNodes,Files} where FailedNodes is a list of nodes where problems
+%% occurred. Files is a tuple list of [{Node,[{FType,FileNames},...]},...].
+fetch_logfiles_copy(CtrlNode,Dir,Prefix,TRDstorage,Dbg,NodeSpecs) ->
+    CopySpecList=build_copylist(CtrlNode,Dbg,NodeSpecs,TRDstorage),
+    fetch_logfiles_copy_2(Dir,Prefix,Dbg,CopySpecList,[],[]).
+
+fetch_logfiles_copy_2(Dir,Prefix,Dbg,[{Node,CopySpecs}|Rest],FailedNodes,Files) ->
+    case fetch_logfiles_copy_3(Dir,Prefix,Dbg,CopySpecs,[],0) of
+	{0,LocalFiles} ->                    % Copy went ok and zero errors.
+	    fetch_logfiles_copy_2(Dir,Prefix,Dbg,Rest,FailedNodes,[{Node,LocalFiles}|Files]);
+	{_N,LocalFiles} ->                   % Copied files, but some went wrong.
+	    case lists:member(Node,FailedNodes) of
+		true ->                      % Node already in FailedNodes.
+		    fetch_logfiles_copy_2(Dir,Prefix,Dbg,Rest,FailedNodes,
+					  [{Node,LocalFiles}|Files]);
+		false ->                     % Node not marked as failed, yet.
+		    fetch_logfiles_copy_2(Dir,Prefix,Dbg,Rest,[Node|FailedNodes],
+					  [{Node,LocalFiles}|Files])
+	    end
+    end;
+fetch_logfiles_copy_2(_,_,_,[],FailedNodes,Files) ->
+    {FailedNodes,Files}.                     % The return value from fetch_logfiles_copy.
+
+fetch_logfiles_copy_3(Dir,Prefix,Dbg,[{FType,RemoteFiles}|Rest],Results,Errors) ->
+    {Err,LocalFiles}=fetch_logfiles_copy_3_1(Dir,Prefix,Dbg,RemoteFiles,[],0),
+    fetch_logfiles_copy_3(Dir,Prefix,Dbg,Rest,[{FType,LocalFiles}|Results],Errors+Err);
+fetch_logfiles_copy_3(_,_,_,[],Results,Errors) ->
+    {Errors,Results}.
+
+%% For each file of one file-type (e.g. trace_log).
+fetch_logfiles_copy_3_1(Dir,Prefix,Dbg,[File|Rest],LocalFiles,Errors) ->
+    DestName=Prefix++filename:basename(File),
+    Destination=filename:join(Dir,DestName),
+    case do_copy_file(File,Destination) of
+	ok ->
+	    fetch_logfiles_copy_3_1(Dir,Prefix,Dbg,Rest,[DestName|LocalFiles],Errors);
+	{error,Reason} ->
+	    inviso_tool_lib:debug(copy_files,Dbg,[File,Destination,Reason]),
+	    fetch_logfiles_copy_3_1(Dir,Prefix,Dbg,Rest,LocalFiles,Errors+1)
+    end;
+fetch_logfiles_copy_3_1(_,_,_,[],LocalFiles,Errors) ->
+    {Errors,LocalFiles}.
+
+%% Help function which builds a [{Node,[{Type,[ListOfRemoteFiles]}},...}]
+%% where Type describes trace_log or ti_log and each entry in ListOfRemoteFiles
+%% is a complete path to a file to be copied.
+build_copylist(CtrlNode,Dbg,NodeSpecList,TRDstorage) ->
+    build_copylist_2(CtrlNode,Dbg,NodeSpecList,TRDstorage,[]).
+
+%% For each node specified in the NodeSpecList.
+build_copylist_2(CtrlNode,Dbg,[{Node,SourceDir}|Rest],TRDstorage,Acc) ->
+    TRDlist=find_tracerdata_for_node_trd(Node,TRDstorage),
+    CopySpecList=build_copylist_3(CtrlNode,Dbg,SourceDir,Node,TRDlist),
+    build_copylist_2(CtrlNode,Dbg,Rest,TRDstorage,[CopySpecList|Acc]);
+build_copylist_2(_,_,[],_,Acc) ->
+    lists:flatten(Acc).
+
+%% For each tracerdata found for the node.
+build_copylist_3(void,Dbg,SourceDir,Node,[TRD|Rest]) -> % The non-distributed case.
+    case inviso:list_logs(TRD) of
+	{ok,FileSpec} when list(FileSpec) -> % [{trace_log,Dir,Files},...]
+	    NewFileSpec=build_copylist_4(SourceDir,FileSpec,[]),
+	    [{Node,NewFileSpec}|build_copylist_3(void,Dbg,SourceDir,Node,Rest)];
+	{ok,no_log} ->                       % This tracedata not associated with any log.
+	    build_copylist_3(void,Dbg,SourceDir,Node,Rest);
+	{error,Reason} ->
+	    inviso_tool_lib:debug(list_logs,Dbg,[Node,TRD,Reason]),
+	    build_copylist_3(void,Dbg,SourceDir,Node,Rest)
+    end;
+build_copylist_3(CtrlNode,Dbg,SourceDir,Node,[TRD|Rest]) -> % The distributed case.
+    case inviso_tool_lib:inviso_cmd(CtrlNode,list_logs,[[{Node,TRD}]]) of
+	{ok,[{Node,{ok,FileSpec}}]} when list(FileSpec) ->
+	    NewFileSpec=build_copylist_4(SourceDir,FileSpec,[]),
+	    [{Node,NewFileSpec}|build_copylist_3(CtrlNode,Dbg,SourceDir,Node,Rest)];
+	{ok,[{Node,{ok,no_log}}]} ->         % It relays to another node, no files!
+	    build_copylist_3(CtrlNode,Dbg,SourceDir,Node,Rest);
+	{ok,[{Node,{error,Reason}}]} ->
+	    inviso_tool_lib:debug(list_logs,Dbg,[Node,TRD,Reason]),
+	    build_copylist_3(CtrlNode,Dbg,SourceDir,Node,Rest);
+	{error,Reason} ->                    % Some general failure.
+	    inviso_tool_lib:debug(list_logs,Dbg,[Node,TRD,Reason]),
+	    build_copylist_3(CtrlNode,Dbg,SourceDir,Node,Rest)
+    end;
+build_copylist_3(_,_,_,_,[]) ->
+    [].
+
+%% Help function which makes a [{Type,Files},...] list where each file in Files
+%% is with full path as found from our file-system.
+build_copylist_4(SourceDir,[{Type,_Dir,Files}|Rest],Accum) ->
+    NewFiles=
+	lists:foldl(fun(FName,LocalAcc)->[filename:join(SourceDir,FName)|LocalAcc] end,
+		    [],
+		    Files),
+    build_copylist_4(SourceDir,Rest,[{Type,NewFiles}|Accum]);
+build_copylist_4(_,[],Accum) ->
+    Accum.
+				 
+
+%% Help function which copies a file using os:cmd.
+%% Returns 'ok' or {error,Reason}.
+do_copy_file(Source,Destination) ->
+    case os:type() of
+	{win32,_} ->
+	    os:cmd("copy "++Source++" "++Destination), % Perhaps a test on success?
+	    ok;
+	{unix,_} ->
+	    os:cmd("cp "++Source++" "++Destination), % Perhaps a test on success?
+	    ok
+    end.
+%% ------------------------------------------------------------------------------
+
+
+%% ------------------------------------------------------------------------------
+
+%% ==============================================================================
+%% Various help functions.
+%% ==============================================================================
+
+%% Help function going through the Nodes list and checking that only nodes
+%% mentioned in OurNodes gets returned. It also makes the nodes in the return
+%% value unique.
+remove_nodes_not_ours(Nodes,OurNodes) ->
+    remove_nodes_not_ours_2(Nodes,OurNodes,[],[]).
+
+remove_nodes_not_ours_2([Node|Rest],OurNodes,OurAcc,OtherAcc) ->
+    case lists:member(Node,OurNodes) of
+	true ->                              % Ok it is one of our nodes.
+	    case lists:member(Node,OurAcc) of
+		true ->                      % Already in the list, skip.
+		    remove_nodes_not_ours_2(Rest,OurNodes,OurAcc,OtherAcc);
+		false ->
+		    remove_nodes_not_ours_2(Rest,OurNodes,[Node|OurAcc],OtherAcc)
+	    end;
+	false ->
+	    case lists:member(Node,OtherAcc) of
+		true ->
+		    remove_nodes_not_ours_2(Rest,OurNodes,OurAcc,OtherAcc);
+		false ->
+		    remove_nodes_not_ours_2(Rest,OurNodes,OurAcc,[Node|OtherAcc])
+	    end
+    end;
+remove_nodes_not_ours_2([],_,OurAcc,OtherAcc) ->
+    {lists:reverse(OurAcc),lists:reverse(OtherAcc)}.
+%% ------------------------------------------------------------------------------
+
+%% Help function which returns 'true' or 'false' depending on if TracerData is
+%% meant to be used by the session handler (true) or if it supposed to be passed
+%% on to the trace system.
+is_tool_internal_tracerdata(_) -> % CURRENTLY NO INTERNAL TRACER DATA!
+    false.
+%% ------------------------------------------------------------------------------
+
+%% Help function which checks that all nodes in the first list of nodes exists
+%% in the second list of nodes. Returns 'true' or 'false'. The latter if as much
+%% as one incorrect node was found.
+check_our_nodes([Node|Rest],AllNodes) ->
+    case lists:member(Node,AllNodes) of
+	true ->
+	    check_our_nodes(Rest,AllNodes);
+	false ->                             % Then we can stop right here.
+	    false
+    end;
+check_our_nodes([],_) ->
+    true.
+%% ------------------------------------------------------------------------------
+
+%% Help function which checks that a directory actually exists. Returns 'true' or
+%% 'false'.
+check_directory_exists(Dir) ->
+    case file:read_file_info(Dir) of
+	{ok,#file_info{type=directory}} ->
+	    true;
+	_ ->                                 % In all other cases it is not valid.
+	    false
+    end.
+%% ------------------------------------------------------------------------------
+
+%% This function stops the tracing on all nodes in Nodes. Preferably Nodes is a list
+%% of only tracing runtime components. Not that there will actually be any difference
+%% since the return value does not reflect how stopping the nodes went.
+%% Returns 'ok' or {error,Reason}, the latter only in case of general failure.
+stop_all_tracing(void,Dbg,[?LOCAL_RUNTIME]) ->   % The non-distributed case, and is tracing.
+    case inviso:stop_tracing() of
+	{ok,_State} ->
+	    ok;
+	{error,Reason} ->                    % We actually don't care.
+	    inviso_tool_lib:debug(stop_tracing,Dbg,[?LOCAL_RUNTIME,Reason]),
+	    ok
+    end;
+stop_all_tracing(void,_,_) ->                % There is no local runtime started.
+    ok;
+stop_all_tracing(CtrlNode,Dbg,Nodes) ->
+    case inviso_tool_lib:inviso_cmd(CtrlNode,stop_tracing,[Nodes]) of
+	{ok,Result} ->                       % The result is only used for debug.
+	    Failed=lists:foldl(fun({N,{error,Reason}},Acc)->[{N,{error,Reason}}|Acc];
+				  (_,Acc)->Acc
+			       end,
+			       [],
+			       Result),
+	    if
+		Failed==[] ->
+		    ok;
+		true ->
+		    inviso_tool_lib:debug(stop_tracing,Dbg,[Nodes,Failed]),
+		    ok
+	    end;
+	{error,Reason} ->
+	    {error,{stop_tracing,Reason}}
+    end.
+%% ------------------------------------------------------------------------------
+
+%% Help function removing all local logs using the tracerdata to determine what
+%% logs to remove from where.
+%% There is no significant return value since it is not really clear what to do
+%% if removal went wrong. The function can make debug-reports thought.
+remove_all_local_logs(CtrlNode,TRDstorage,Nodes,Dbg) ->
+    LogSpecList=build_logspeclist_remove_logs(Nodes,TRDstorage),
+    case inviso_tool_lib:inviso_cmd(CtrlNode,delete_log,[LogSpecList]) of
+	{ok,Results} ->
+	    case look_for_errors_resultlist(Results) of
+		[] ->                        % No errors found in the result!
+		    true;
+		Errors ->
+		    inviso_tool_lib:debug(remove_all_local_logs,Dbg,[Errors]),
+		    true
+	    end;
+	{error,Reason} ->                    % Some general error.
+	    inviso_tool_lib:debug(remove_all_local_logs,Dbg,[{error,Reason}]),
+	    true
+    end.
+
+%% Help function which puts together a list of {Node,Tracerdata} tuples. Note that
+%% we must build one tuple for each tracerdata for one node.
+build_logspeclist_remove_logs(Nodes,TRDstorage) ->
+    [{Node,TracerData}||Node<-Nodes,TracerData<-find_tracerdata_for_node_trd(Node,TRDstorage)].
+%% ------------------------------------------------------------------------------
+
+%% Help function which traverses a resultlist from an inviso function. Such are
+%% built up as [{Node,SubResults},...] where SubResult is a list of tuples for each
+%% file-type (e.g trace_log) {FType,FileList} where a FileList is either {error,Reason}
+%% or {ok,FileName}.
+%% Returns a list of {Node,[{error,Reason},...]}.
+look_for_errors_resultlist([{Node,{error,Reason}}|Rest]) ->
+    [{Node,{error,Reason}}|look_for_errors_resultlist(Rest)];
+look_for_errors_resultlist([{Node,{ok,NResults}}|Rest]) when list(NResults) ->
+    case look_for_errors_resultlist_2(NResults,[]) of
+	[] ->
+	    look_for_errors_resultlist(Rest);
+	Errors ->                            % A list of lists.
+	    [{Node,lists:flatten(Errors)}|look_for_errors_resultlist(Rest)]
+    end;
+look_for_errors_resultlist([_|Rest]) ->
+    look_for_errors_resultlist(Rest);
+look_for_errors_resultlist([]) ->
+    [].
+
+look_for_errors_resultlist_2([{_FType,NSubResult}|Rest],Accum) ->
+    case lists:filter(fun({error,_Reason})->true;(_)->false end,NSubResult) of
+	[] ->                                % No errors for this node.
+	    look_for_errors_resultlist_2(Rest,Accum);
+	Errors ->                            % A list of at least one error.
+	    look_for_errors_resultlist_2(Rest,[Errors|Accum])
+    end;
+look_for_errors_resultlist_2([],Accum) ->
+    Accum.
+%% ------------------------------------------------------------------------------
+
+
+%% ------------------------------------------------------------------------------
+%% Functions working on the loopdata structure.
+%% Its main purpose is to store information about runtime components participating
+%% in the session and their current status.
+%% ------------------------------------------------------------------------------
+
+-record(ld,{parent,
+	    ctrlnode,
+	    ctrlpid,                         % To where to send inviso cmd.
+	    rtstates,
+	    tracerdata,
+	    safetycatches,
+	    dbg,
+	    actstorage                       % Activity storage, for reactivate.
+	   }).
+
+%% Function creating the initial datastructure.
+%% The datastructure is [{Node,State},...].
+%%
+%% The tracerdata table is a bag simply for the reason that if we try to insert
+%% the same tracerdata for a node twice, we will end up with one tracerdata after
+%% all. This is useful when we insert tracerdata ourselves, the tracerdata will
+%% come as a state-change too.
+mk_ld(Parent,CtrlNode,CtrlPid,RTStates,NodeParams,OtherNodes,SafetyCatches,Dbg) ->
+    TRDtableName=list_to_atom("inviso_tool_sh_trdstorage_"++pid_to_list(self())),
+    TRDtid=ets:new(TRDtableName,[bag]),
+    ACTtableName=list_to_atom("inviso_tool_sh_actstorage_"++pid_to_list(self())),
+    ACTtid=ets:new(ACTtableName,[bag]),
+    mk_ld_fill_tracerdata(CtrlNode,TRDtid,NodeParams,OtherNodes), % Fill the ETS table.
+    #ld{parent=Parent,                       % The tool main process.
+	ctrlnode=CtrlNode,                   % Node name where the control component is.
+	ctrlpid=CtrlPid,                     % The process id of the control component.
+	rtstates=RTStates,                   % All nodes and their state/status.
+	tracerdata=TRDtid,
+	safetycatches=SafetyCatches,
+	dbg=Dbg,
+	actstorage=ACTtid
+       }.
+
+%% Help function which inserts tracer data for the nodes. Note that we can get
+%% tracer data either from the return value from init_tracing or by asking the
+%% node for it. The latter is necessary for the nodes which were marked not to
+%% be initiated by the session handler. This maybe because those nodes have
+%% autostarted.
+mk_ld_fill_tracerdata(CtrlNode,TId,NodeParams,OtherNodes) ->
+    mk_ld_fill_tracerdata_nodeparams(TId,NodeParams),
+    mk_ld_fill_tracerdata_othernodes(CtrlNode,TId,OtherNodes).
+
+mk_ld_fill_tracerdata_nodeparams(TId,[{Node,TracerData}|Rest]) ->
+    ets:insert(TId,{Node,TracerData}),
+    mk_ld_fill_tracerdata_nodeparams(TId,Rest);
+mk_ld_fill_tracerdata_nodeparams(_,[]) ->
+    ok.
+
+mk_ld_fill_tracerdata_othernodes(_,_,[]) ->  % Then not necessary to do anything.
+    ok;
+mk_ld_fill_tracerdata_othernodes(void,TId,[Node]) -> % The non-distributed case.
+    case inviso:get_tracerdata() of
+	{error,_Reason} ->                   % Perhaps in state new or disconnected.
+	    ok;                              % Do nothing.
+	{ok,TracerData} ->
+	    ets:insert(TId,{Node,TracerData})
+    end;
+mk_ld_fill_tracerdata_othernodes(CtrlNode,TId,Nodes) ->
+    case inviso_tool_lib:invisomd(CtrlNode,get_tracerdata,[Nodes]) of
+	{ok,Results} ->
+	    mk_ld_fill_tracerdata_othernodes_2(TId,Results);
+	{error,_Reason} ->                   % Strange, we will probably crash later.
+	    ok
+    end.
+
+mk_ld_fill_tracerdata_othernodes_2(TId,[{_Node,{ok,no_tracerdata}}|Rest]) ->
+    mk_ld_fill_tracerdata_othernodes_2(TId,Rest); % It was not initiated then!
+mk_ld_fill_tracerdata_othernodes_2(TId,[{Node,{ok,TracerData}}|Rest]) ->
+    ets:insert(TId,{Node,TracerData}),
+    mk_ld_fill_tracerdata_othernodes_2(TId,Rest);
+mk_ld_fill_tracerdata_othernodes_2(_,[]) ->
+    ok.
+%% ------------------------------------------------------------------------------
+
+get_ctrlnode_ld(#ld{ctrlnode=CtrlNode}) ->
+    CtrlNode.
+%% ------------------------------------------------------------------------------
+
+
+get_ctrlpid_ld(#ld{ctrlpid=CtrlPid}) ->
+    CtrlPid.
+%% ------------------------------------------------------------------------------
+
+get_rtstates_ld(#ld{rtstates=RTStates}) ->
+    RTStates.
+
+put_rtstates_ld(NewRTStates,LD) ->
+    LD#ld{rtstates=NewRTStates}.
+%% ------------------------------------------------------------------------------
+
+get_trdstorage_ld(#ld{tracerdata=TId}) ->
+    TId.
+
+put_trdstorage_ld(_NewTId,LD) ->
+    LD.
+%% ------------------------------------------------------------------------------
+
+%% Help function which adds the current tracerdata of node Node to the tracerdata
+%% storage. We only want to add tracerdata we have not seen before. We therefore
+%% avoid adding it if the node already is in state ?TRACING.
+%% Returns a new tracerdata (what ever it is)!
+add_current_tracerdata_ld(CtrlNode,Node,RTStates,TId) ->
+    case get_statestatus_rtstates(Node,RTStates) of
+	{ok,{?TRACING,_}} ->                 % Then we have already added the tracerdata.
+	    TId;                             % Then do nothing.
+	{ok,_} ->                            % Since we were not tracing before.
+	    case add_current_tracerdata_ld_fetchtracerdata(CtrlNode,Node) of
+		{ok,TracerData} ->
+		    ets:insert(TId,{Node,TracerData});
+		no_tracerdata ->             % Strange, how could we become tracing
+		    ok;
+		{error,_Reason} ->           % The node perhaps disconnected!?
+		    ok
+	    end;
+	false ->                             % Very strange, not our node!
+	    ok                               % Do nothing.
+    end.
+
+add_current_tracerdata_ld_fetchtracerdata(void,_Node) ->
+    case inviso:get_tracerdata() of
+	{ok,TracerData} ->
+	    {ok,TracerData};
+	{error,no_tracerdata} ->
+	    no_tracerdata;
+	{error,Reason} ->
+	    {error,Reason}
+    end;
+add_current_tracerdata_ld_fetchtracerdata(CtrlNode,Node) ->
+    case inviso_tool_lib:inviso_cmd(CtrlNode,get_tracerdata,[[Node]]) of
+	{ok,[{Node,{ok,TracerData}}]} ->
+	    {ok,TracerData};
+	{ok,[{Node,{error,no_tracerdata}}]} ->
+	    no_tracerdata;
+	{ok,[{Node,{error,Reason}}]} ->
+	    {error,Reason};
+	{error,Reason} ->
+	    {error,Reason}
+    end.
+%% ------------------------------------------------------------------------------
+
+
+get_safetycatches_ld(#ld{safetycatches=SCs}) ->
+    SCs.
+%% ------------------------------------------------------------------------------
+
+get_dbg_ld(#ld{dbg=Dbg}) ->
+    Dbg.
+%% ------------------------------------------------------------------------------
+
+get_actstorage_ld(#ld{actstorage=ACTstorage}) ->
+    ACTstorage.
+
+put_actstorage_ld(_NewACTstorage,LD) ->
+    LD.
+%% ------------------------------------------------------------------------------
+
+
+
+%% ------------------------------------------------------------------------------
+%% Functions working on the rtstates structure (which is a substructure of loopdata).
+%% It is either:
+%% [{Node,StateStatus,Opts},...]
+%% Node is either the node name of the runtime component erlang node or
+%% ?LOCAL_RUNTIME as returned from the trace control component.
+%% StateStatus is {State,Status}, 'unavailable' or 'unknown'.
+%% Status is the returnvalue from trace control component.
+%%   i.e: running | {suspended,Reason}
+%% ------------------------------------------------------------------------------
+
+%% Function contructing an rtstates structure from a list of [{Node,StateStatus,Opts},...].
+to_rtstates(ListOfStates) when list(ListOfStates) ->
+    ListOfStates.
+%% ------------------------------------------------------------------------------
+
+%% Function which takes a rtstates structure and returns a list of [{Node,StateStatus},...].
+from_rtstates(RTStates) ->
+    RTStates.
+%% ------------------------------------------------------------------------------
+
+%% Function which takes an rtstates structure and a result as returned from
+%% init_tracing. The RTStates is modified for the nodes that changed state as a
+%% result of successful init_tracing.
+%% Returns a new RTStates.
+set_tracing_rtstates([E={Node,_StateStatus,Opts}|Rest],Result) ->
+    case lists:keysearch(Node,1,Result) of
+	{value,{_,ok}} ->                    % Means state-change to tracing!
+	    [{Node,{tracing,running},Opts}|set_tracing_rtstates(Rest,Result)];
+	_ ->                                 % Otherwise, leave it as is.
+	    [E|set_tracing_rtstates(Rest,Result)]
+    end;
+set_tracing_rtstates([],_Result) ->
+    [].
+%% ------------------------------------------------------------------------------
+
+%% Function updating the state/status for a certain runtime component.
+%% Returns a new RTStates structure. Note that Node must not necessarily be one
+%% of the nodes in the session. Meaning that Node shall not be added to RTStates
+%% should it not already be in there.
+statechange_rtstates(Node,State,Status,RTStates) when list(RTStates) ->
+    case lists:keysearch(Node,1,RTStates) of
+	{value,{_,_,Opts}} ->
+	    lists:keyreplace(Node,1,RTStates,{Node,{State,Status},Opts});
+	_ ->                                 % Then Node does not exist.
+	    RTStates                         % Just keep it as is, as keyreplace would have done.
+    end.
+%% ------------------------------------------------------------------------------
+
+%% Function updating the state/status for a certain runtime component. The
+%% state/status is set to 'unavailable'.
+%% Returns a new RTStates structure.
+set_unavailable_rtstates(Node,RTStates) when list(RTStates) ->
+    case lists:keysearch(Node,1,RTStates) of
+	{value,{_,_,Opts}} ->
+	    lists:keyreplace(Node,1,RTStates,{Node,unavailable,Opts});
+	_ ->                                 % Then Node does not exist.
+	    RTStates                         % Just keep it as is, as keyreplace would have done.
+    end.
+%% ------------------------------------------------------------------------------
+
+%% Function finding the statestatus associated with Node in the RTStates structure.
+%% Returns {ok,StateStatus} or 'false'.
+get_statestatus_rtstates(Node,RTStates) ->
+    case lists:keysearch(Node,1,RTStates) of
+	{value,{_,StateStatus,_}} ->
+	    {ok,StateStatus};
+	false ->
+	    false
+    end.
+%% ------------------------------------------------------------------------------
+
+%% Help function which returns a list of all nodes that are currently marked
+%% as available to us in the runtime state structure.	      
+get_all_available_nodes_rtstates(RTStates) ->
+    get_all_session_nodes_rtstates(lists:filter(fun({_N,unavailable,_})->false;
+						   (_)->true
+						end,
+						RTStates)).
+%% ------------------------------------------------------------------------------
+
+%% Help function returning a list of all nodes belonging to this session.
+get_all_session_nodes_rtstates(RTStates) ->
+    lists:map(fun({Node,_,_})->Node end,RTStates).
+%% ------------------------------------------------------------------------------
+
+%% Function which returns a list of nodes that are indicated as tracing in the
+%% RTStates structure.
+get_all_tracing_nodes_rtstates(RTStates) ->
+    lists:map(fun({N,_,_})->N end,
+	      lists:filter(fun({_,{tracing,_},_})->true;(_)->false end,RTStates)).
+%% ------------------------------------------------------------------------------
+
+%% Returns the options associated with Node in the RTStates structure.
+get_opts_rtstates(Node,RTStates) ->
+    case lists:keysearch(Node,1,RTStates) of
+	{value,{_,_,Opts}} ->
+	    {ok,Opts};
+	false ->
+	    false
+    end.
+
+%% ------------------------------------------------------------------------------
+%% Functions working on the tracerdata structure, which is a part of the loopdata.
+%% The tracerdata structure is an ETS-table of type bag storing:
+%% {Node,TracerData}.
+%% Note that there can of course be multiple entries for a node.
+%% ------------------------------------------------------------------------------
+
+%% Help function which takes a tracerdata loopdata structure and returns a list
+%% of all stored tracerdata for a certain Node.
+find_tracerdata_for_node_trd(Node,TRD) ->
+    case ets:lookup(TRD,Node) of
+	Result when list(Result) ->
+	    lists:map(fun({_Node,TracerData})->TracerData end,Result);
+	_ ->                                 % Should probably never happend.
+	    []
+    end.
+%% ------------------------------------------------------------------------------
+			 
+
+%% ------------------------------------------------------------------------------
+%% Functions working on the activity storage structure, which is part of the
+%% loopdata. It stores entries about things that needs to be "redone" in case
+%% of a reactivation of the node. The time order is also important.
+%% Note that for every ActivityType there must be a "handler" in the reactivation
+%% functionality.
+%%
+%% The structure is a bag of {Node,ActivityType,What}.
+%%   ActivityType/What=tf/{Op,TraceConfList}|tpm/{Op,[Mod,Func,Arity,MS,CallFunc]}
+%%                                              /{Op,[Mod,Func,Arity,MS,CallFunc,ReturnFunc]}
+%%                                              /{Op,[]}
+%%     TraceConfList=[{Proc,Flags},...]
+%%     How=true|false
+%% ------------------------------------------------------------------------------
+
+%% Function that adds meta-pattern activities to the activity storage. Note
+%% that one of the parameters to the function is a return value from an
+%% inviso call. In that way we do not enter activities that were unsuccessful.
+%% Op can be either the setting or clearing of a meta pattern.
+%% Returns a new ACTstorage.
+add_tpm_actstorage([{Node,ok}|Rest],Op,InvisoCmdParams,ACTstorage) ->
+    true=ets:insert(ACTstorage,{Node,tpm,{Op,InvisoCmdParams}}),
+    add_tpm_actstorage(Rest,Op,InvisoCmdParams,ACTstorage);
+add_tpm_actstorage([_|Rest],Op,InvisoCmdParams,ACTstorage) ->
+    add_tpm_actstorage(Rest,Op,InvisoCmdParams,ACTstorage);
+add_tpm_actstorage([],_,_,ACTstorage) ->
+    ACTstorage.
+
+%% Function that adds process trace-flags to the activity storage. Note that one
+%% of the parameters is the return value from an inviso function. Meaning that
+%% if the flags failed in their entirety, no activity will be saved. If only
+%% some of the flags failed, we will not go through the effort of trying to find
+%% out exactly which.
+%% Returns a new activity storage structure.
+add_tf_actstorage([{_Node,{error,_Reason}}|Rest],Op,TraceConfList,ACTstorage) ->
+    add_tf_actstorage(Rest,Op,TraceConfList,ACTstorage);
+add_tf_actstorage([{Node,_Result}|Rest],Op,TraceConfList,ACTstorage) ->
+    true=ets:insert(ACTstorage,{Node,tf,{Op,TraceConfList}}),
+    add_tf_actstorage(Rest,Op,TraceConfList,ACTstorage);
+add_tf_actstorage([],_,_,ACTstorage) ->
+    ACTstorage.
+%% ------------------------------------------------------------------------------
+
+%% Finds all activities associated with Node. Returns a list of them in the
+%% same order as they were inserted.
+get_activities_actstorage(Node,ACTstorage) ->
+    case ets:lookup(ACTstorage,Node) of
+	[] ->
+	    false;
+	Result when list(Result) ->
+	    {ok,lists:map(fun({_N,Type,What})->{Type,What} end,Result)}
+    end.
+%% ------------------------------------------------------------------------------
+
+%% Function removing all activity entries associated with Node. This is useful
+%% if the Node disconnects for instance.
+del_node_actstorage(Node,ACTstorage) ->
+    ets:delete(ACTstorage,Node),
+    ACTstorage.
+%% ------------------------------------------------------------------------------
+
diff --git a/lib/inviso/test/inviso_tool_SUITE.erl b/lib/inviso/test/inviso_tool_SUITE.erl
index d59e3b5fa8..6b16e506eb 100644
--- a/lib/inviso/test/inviso_tool_SUITE.erl
+++ b/lib/inviso/test/inviso_tool_SUITE.erl
@@ -1,7 +1,7 @@
 %%
 %% %CopyrightBegin%
 %%
-%% Copyright Ericsson AB 1997-2010. All Rights Reserved.
+%% Copyright Ericsson AB 1997-2011. All Rights Reserved.
 %%
 %% The contents of this file are subject to the Erlang Public License,
 %% Version 1.1, (the "License"); you may not use this file except in
@@ -22,7 +22,7 @@
 %% properly.
 %%
 %% Authors:
-%% Lennart �hman, [email protected]
+%% Lennart Öhman, [email protected]
 %% -----------------------------------------------------------------------------
 
 -module(inviso_tool_SUITE).
@@ -103,21 +103,21 @@ end_per_testcase(_Case,Config) ->
     ?l test_server:stop_node(get_remotenode_config(inviso2,Config)),
     ?l test_server:timetrap_cancel(get_timetraphandle_config(Config)),
     ?l case whereis(inviso_tool) of          % In case inviso_tool did not stop.
-	   Pid when pid(Pid) ->
+	   Pid when is_pid(Pid) ->
 	       ?l io:format("Had to kill inviso_tool!~n",[]),
 	       ?l exit(Pid,kill);
 	   _ ->
 	       true
        end,
     ?l case whereis(inviso_rt) of            % In case we ran a runtime here.
-	   Pid2 when pid(Pid2) ->
+	   Pid2 when is_pid(Pid2) ->
 	       ?l io:format("Had to kill inviso_rt!~n",[]),
 	       ?l exit(Pid2,kill);
 	   _ ->
 	       true
        end,
     ?l case whereis(inviso_c) of             % In case we ran the controll component here.
-	   Pid3 when pid(Pid3) ->
+	   Pid3 when is_pid(Pid3) ->
 	       ?l io:format("Had to kill inviso_c!~n",[]),
 	       ?l exit(Pid3,kill);
 	   _ ->
@@ -196,7 +196,7 @@ end_per_testcase(_Case,Config) ->
 %% TEST CASE: Basic, distributed, start of inviso_tool with simple tracing.
 dist_basic_1(doc) -> ["Simple test"];
 dist_basic_1(suite) -> [];
-dist_basic_1(Config) when list(Config) ->
+dist_basic_1(Config) when is_list(Config) ->
     RemoteNodes=get_remotenodes_config(Config),
     [RegExpNode|_]=RemoteNodes,
     CNode=node(),
@@ -325,7 +325,7 @@ dist_basic_1(Config) when list(Config) ->
 	inviso_tool:get_autostart_data(Nodes,{dependency,infinity}),
     ?l true=check_noderesults(Nodes,
 			      fun({_N,{ok,{[{dependency,infinity}],{tdg,{_M,_F,TDlist}}}}})
-				 when list(TDlist)->
+				 when is_list(TDlist)->
 				      true;
 				 (_) ->
 				      false
@@ -554,7 +554,7 @@ dist_rtc(Config) when is_list(Config) ->
 %% This test case tests mainly that reconnect and reinitiations of a node works.
 dist_reconnect(doc) -> [""];
 dist_reconnect(suite) -> [];
-dist_reconnect(Config) when list(Config) ->
+dist_reconnect(Config) when is_list(Config) ->
     RemoteNodes=get_remotenodes_config(Config),
     [RegExpNode|OtherNodes]=RemoteNodes,
     CNode=node(),
@@ -595,7 +595,7 @@ dist_reconnect(Config) when list(Config) ->
     %% than RexExpNode.
     ?l {ok,NodeResults1}=inviso_tool:inviso(tp,["application.*",module_info,0,[]]),
     ?l true=check_noderesults(OtherNodes,
-			      fun({_N,{ok,Ints}}) when list(Ints) ->
+			      fun({_N,{ok,Ints}}) when is_list(Ints) ->
 				      NrOfModules=lists:sum(Ints),
 				      true;
 				 (_) ->
@@ -610,9 +610,9 @@ dist_reconnect(Config) when list(Config) ->
 
     %% Now it is time to restart the crashed node and reconnect it and then
     %% finally reinitiate it.
-    ?l RegExpNodeString=atom_to_list(RegExpNode),
-    ?l {match,Pos,1}=regexp:first_match(RegExpNodeString,"@"),
-    ?l RegExpNodeName=list_to_atom(lists:sublist(RegExpNodeString,Pos-1)),
+    ?l RegExpNodeString=atom_to_list(RegExpNode),
+    ?l [NodeNameString,_HostNameString] = string:tokens(RegExpNodeString,[$@]),
+    ?l RegExpNodeName=list_to_atom(NodeNameString),
     ?l test_server:start_node(RegExpNodeName,peer,[]),
     ?l ok=poll(net_adm,ping,[RegExpNode],pong,20),
     ?l SuiteDir=filename:dirname(code:which(?MODULE)),
@@ -626,7 +626,7 @@ dist_reconnect(Config) when list(Config) ->
     ?l ok=poll(rpc,
 	       call,
 	       [RegExpNode,erlang,whereis,[inviso_tool_test_proc]],
-	       fun(P) when pid(P) -> true;
+	       fun(P) when is_pid(P) -> true;
 		  (undefined) -> false
 	       end,
 	       10),
@@ -685,7 +685,7 @@ dist_reconnect(Config) when list(Config) ->
 %% mark it as tracing-running.
 dist_adopt(doc) -> [""];
 dist_adopt(suite) -> [];
-dist_adopt(Config) when list(Config) ->
+dist_adopt(Config) when is_list(Config) ->
     RemoteNodes=get_remotenodes_config(Config),
     [RegExpNode|_]=RemoteNodes,
     CNode=node(),
@@ -755,7 +755,7 @@ dist_adopt(Config) when list(Config) ->
 %% This test tests that saving and restoring a history works.
 dist_history(doc) -> [""];
 dist_history(suite) -> [];
-dist_history(Config) when list(Config) ->		     
+dist_history(Config) when is_list(Config) ->		     
     RemoteNodes=get_remotenodes_config(Config),
     [RegExpNode|_]=RemoteNodes,
     CNode=RegExpNode,                       % We use a remote control component.
@@ -904,7 +904,7 @@ dist_history(Config) when list(Config) ->
 %% are no nodes that can be initiated or reinitiated.
 dist_start_session_special(doc) -> [""];
 dist_start_session_special(suite) -> [];
-dist_start_session_special(Config) when list(Config) ->
+dist_start_session_special(Config) when is_list(Config) ->
     RemoteNodes=get_remotenodes_config(Config),
     [RegExpNode|_]=RemoteNodes,
     CNode=RegExpNode,                       % We use a remote control component.
@@ -1019,7 +1019,7 @@ stop_inviso_tool_session(CNode,SessionNr,Nodes) ->
 
 %% Help function checking that there is a Result for each node in Nodes.
 %% Returns 'true' if successful.
-check_noderesults(Nodes,Fun,[{Node,Result}|Rest]) when function(Fun) ->
+check_noderesults(Nodes,Fun,[{Node,Result}|Rest]) when is_function(Fun) ->
     case Fun({Node,Result}) of
 	true ->
 	    case lists:member(Node,Nodes) of
@@ -1052,7 +1052,7 @@ poll(_,_,_,_,0) ->
     error;
 poll(M,F,Args,Result,Times) ->
     try apply(M,F,Args) of
-	What when function(Result) ->
+	What when is_function(Result) ->
 	    case Result(What) of
 		true ->
 		    ok;