diff options
Diffstat (limited to 'lib/kernel/doc/src/logger_chapter.xml')
-rw-r--r-- | lib/kernel/doc/src/logger_chapter.xml | 1331 |
1 files changed, 1331 insertions, 0 deletions
diff --git a/lib/kernel/doc/src/logger_chapter.xml b/lib/kernel/doc/src/logger_chapter.xml new file mode 100644 index 0000000000..dc68d5c761 --- /dev/null +++ b/lib/kernel/doc/src/logger_chapter.xml @@ -0,0 +1,1331 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2017</year><year>2018</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>Logging</title> + <prepared></prepared> + <docno></docno> + <date></date> + <rev></rev> + <file>logger_chapter.xml</file> + </header> + + <p>Erlang/OTP 21.0 provides a standard API for logging + through <c>Logger</c>, which is part of the Kernel + application. Logger consists of the API for issuing log events, + and a customizable backend where log handlers, filters and + formatters can be plugged in.</p> + <p>By default, the Kernel application installs one log handler at + system start. This handler is named <c>default</c>. It receives + and processes standard log events produced by the Erlang runtime + system, standard behaviours and different Erlang/OTP + applications. The log events are by default written to the + terminal.</p> + <p>You can also configure the system so that the default handler + prints log events to a single file, or to a set of wrap logs + via <seealso marker="disk_log"><c>disk_log</c></seealso>.</p> + <p>By configuration, you can also modify or disable the default + handler, replace it by a custom handler, and install additional + handlers.</p> + + <note> + <p>Since Logger is new in Erlang/OTP 21.0, we do reserve the right + to introduce changes to the Logger API and functionality in + patches following this release. These changes might or might not + be backwards compatible with the initial version.</p> + </note> + + <section> + <title>Overview</title> + <p>A <em>log event</em> consists of a <em>log level</em>, the + <em>message</em> to be logged, and <em>metadata</em>.</p> + <p>The Logger backend forwards log events from the API, first + through a set of <em>primary filters</em>, then through a set of + secondary filters attached to each log handler. The secondary + filters are in the following named <em>handler filters</em>.</p> + <p>Each filter set consists of a <em>log level check</em>, + followed by zero or more <em>filter functions</em>.</p> + <p>The following figure shows a conceptual overview of Logger. The + figure shows two log handlers, but any number of handlers can be + installed.</p> + + <!-- The image is edited with dia in logger_arch.dia file, + and .png file generated with make target 'png'. --> + <image file="logger_arch.png"> + <icaption>Conceptual Overview</icaption> + </image> + + <p>Log levels are expressed as atoms. Internally in Logger, the + atoms are mapped to integer values, and a log event passes the + log level check if the integer value of its log level is less + than or equal to the currently configured log level. That is, + the check passes if the event is equally or more severe than the + configured level. See section <seealso marker="#log_level">Log + Level</seealso> for a listing and description of all log + levels.</p> + <p>The primary log level can be overridden by a log level + configured per module. This is to, for instance, allow more + verbose logging from a specific part of the system.</p> + <p>Filter functions can be used for more sophisticated filtering + than the log level check provides. A filter function can stop or + pass a log event, based on any of the event's contents. It can + also modify all parts of the log event. See see + section <seealso marker="#filters">Filters</seealso> for more + details.</p> + <p>If a log event passes through all primary filters and all + handler filters for a specific handler, Logger forwards the + event to the <em>handler callback</em>. The handler formats and + prints the event to its destination. See + section <seealso marker="#handlers">Handlers</seealso> for more + details.</p> + <p>Everything up to and including the call to the handler + callbacks is executed on the client process, that is, the + process where the log event was issued. It is up to the handler + implementation if other processes are involved or not.</p> + <p>The handlers are called in sequence, and the order is not + defined.</p> + </section> + <section> + <marker id="logger_api"/> + <title>Logger API</title> + <p>The API for logging consists of a set + of <seealso marker="logger#macros">macros</seealso>, and a set + of functions on the form <c>logger:Level/1,2,3</c>, which are + all shortcuts + for <seealso marker="logger#log-2"> + <c>logger:log(Level,Arg1[,Arg2[,Arg3]])</c></seealso>.</p> + <p>The difference between using the macros and the exported + functions is that macros add location (originator) information + to the metadata, and performs lazy evaluation by wrapping the + logger call in a case statement, so it is only evaluated if the + log level of the event passes the primary log level check.</p> + <section> + <marker id="log_level"/> + <title>Log Level</title> + <p>The log level indicates the severity of a event. In + accordance with the Syslog protocol, + <url href="https://www.ietf.org/rfc/rfc5424.txt">RFC + 5424</url>, eight log levels can be specified. The following + table lists all possible log levels by name (atom), integer + value, and description:</p> + + <table align="left"> + <row> + <cell><strong>Level</strong></cell> + <cell align="center"><strong>Integer</strong></cell> + <cell><strong>Description</strong></cell> + </row> + <row> + <cell>emergency</cell> + <cell align="center">0</cell> + <cell>system is unusable</cell> + </row> + <row> + <cell>alert</cell> + <cell align="center">1</cell> + <cell>action must be taken immediately</cell> + </row> + <row> + <cell>critical</cell> + <cell align="center">2</cell> + <cell>critical conditions</cell> + </row> + <row> + <cell>error</cell> + <cell align="center">3</cell> + <cell>error conditions</cell> + </row> + <row> + <cell>warning</cell> + <cell align="center">4</cell> + <cell>warning conditions</cell> + </row> + <row> + <cell>notice</cell> + <cell align="center">5</cell> + <cell>normal but significant conditions</cell> + </row> + <row> + <cell>info</cell> + <cell align="center">6</cell> + <cell>informational messages</cell> + </row> + <row> + <cell>debug</cell> + <cell align="center">7</cell> + <cell>debug-level messages</cell> + </row> + <tcaption>Log Levels</tcaption> + </table> + <p>Notice that the integer value is only used internally in + Logger. In the API, you must always use the atom. To compare + the severity of two log levels, + use <seealso marker="logger#compare_levels-2"> + <c>logger:compare_levels/2</c></seealso>.</p> + </section> + <section> + <marker id="log_message"/> + <title>Log Message</title> + <p>The log message contains the information to be logged. The + message can consist of a format string and arguments (given as + two separate parameters in the Logger API), a string or a + report. The latter, which is either a map or a key-value list, + can be accompanied by a <em>report callback</em> specified in + the log event's <seealso marker="#metadata">metadata</seealso>. + The report callback is a convenience function that + the <seealso marker="#formatters">formatter</seealso> can use + to convert the report to a format string and arguments, or + directly to a string. The + formatter can also use its own conversion function, if no + callback is provided, or if a customized formatting is + desired.</p> + <p>The report callback must be a fun with one or two + arguments. If it takes one argument, this is the report + itself, and the fun returns a format string and arguments:</p> + <pre>fun((<seealso marker="logger#type-report"><c>logger:report()</c></seealso>) -> {<seealso marker="stdlib:io#type-format"><c>io:format()</c></seealso>,[term()]})</pre> + <p>If it takes two arguments, the first is the report, and the + second is a map containing extra data that allows direct + coversion to a string:</p> + <pre>fun((<seealso marker="logger#type-report"><c>logger:report()</c></seealso>,<seealso marker="logger#type-report_cb_config"><c>logger:report_cb_config()</c></seealso>) -> <seealso marker="stdlib:unicode#type-chardata"><c>unicode:chardata()</c></seealso>) + </pre> + <p>The fun must obey the <c>encoding</c>, <c>depth</c> + and <c>chars_limit</c> parameters provided in the second + argument, as the formatter can not do anything useful of these + parameters with the returned string. This variant is used when + the formatting of the report depends on the size and encoding + parameters.</p> + <p>Example, format string and arguments:</p> + <code>logger:error("The file does not exist: ~ts",[Filename])</code> + <p>Example, string:</p> + <code>logger:notice("Something strange happened!")</code> + <p>Example, report, and metadata with report callback:</p> + <code> +logger:debug(#{got => connection_request, id => Id, state => State}, + #{report_cb => fun(R) -> {"~p",[R]} end})</code> + <p>The log message can also be provided through a fun for lazy + evaluation. The fun is only evaluated if the primary log level + check passes, and is therefore recommended if it is expensive + to generate the message. The lazy fun must return a string, a + report, or a tuple with format string and arguments.</p> + </section> + <section> + <title>Metadata</title> + <p>Metadata contains additional data associated with a log + message. Logger inserts some metadata fields by default, and + the client can add custom metadata in two different ways:</p> + <taglist> + <tag>Set process metadata</tag> + <item> + <p>Process metadata is set and updated + with <seealso marker="logger#set_process_metadata-1"> + <c>logger:set_process_metadata/1</c></seealso> + and <seealso marker="logger#update_process_metadata-1"> + <c>logger:update_process metadata/1</c></seealso>, + respectively. This metadata applies to the process on + which these calls are made, and Logger adds the metadata + to all log events issued on that process.</p> + </item> + <tag>Add metadata to a specific log event</tag> + <item> + <p>Metadata associated with one specific log event is given + as the last parameter to the log macro or Logger API + function when the event is issued. For example:</p> + <code>?LOG_ERROR("Connection closed",#{context => server})</code> + </item> + </taglist> + <p>See the description of + the <seealso marker="logger#type-metadata"> + <c>logger:metadata()</c></seealso> type for information + about which default keys Logger inserts, and how the different + metadata maps are merged.</p> + </section> + </section> + <section> + <marker id="filter"/> + <title>Filters</title> + <p>Filters can be primary, or attached to a specific + handler. Logger calls the primary filters first, and if they all + pass, it calls the handler filters for each handler. Logger + calls the handler callback only if all filters attached to the + handler in question also pass.</p> + <p>A filter is defined as:</p> + <pre>{FilterFun, Extra}</pre> + <p>where <c>FilterFun</c> is a function of arity 2, + and <c>Extra</c> is any term. When applying the filter, Logger + calls the function with the log event as the first argument, + and the value of <c>Extra</c> as the second + argument. See <seealso marker="logger#type-filter"> + <c>logger:filter()</c></seealso> for type definitions.</p> + <p>The filter function can return <c>stop</c>, <c>ignore</c> or + the (possibly modified) log event.</p> + <p>If <c>stop</c> is returned, the log event is immediately + discarded. If the filter is primary, no handler filters or + callbacks are called. If it is a handler filter, the + corresponding handler callback is not called, but the log event + is forwarded to filters attached to the next handler, if + any.</p> + <p>If the log event is returned, the next filter function is + called with the returned value as the first argument. That is, + if a filter function modifies the log event, the next filter + function receives the modified event. The value returned from + the last filter function is the value that the handler callback + receives.</p> + <p>If the filter function returns <c>ignore</c>, it means that it + did not recognize the log event, and thus leaves to other + filters to decide the event's destiny.</p> + <p>The configuration option <c>filter_default</c> specifies the + behaviour if all filter functions return <c>ignore</c>, or if no + filters exist. <c>filter_default</c> is by default set + to <c>log</c>, meaning that if all existing filters ignore a log + event, Logger forwards the event to the handler + callback. If <c>filter_default</c> is set to <c>stop</c>, Logger + discards such events.</p> + <p>Primary filters are added + with <seealso marker="logger#add_primary_filter-2"> + <c>logger:add_primary_filter/2</c></seealso> + and removed + with <seealso marker="logger#remove_primary_filter-1"> + <c>logger:remove_primary_filter/1</c></seealso>. They can also + be added at system start via the Kernel configuration + parameter <seealso marker="#logger_parameter"><c>logger</c></seealso>.</p> + <p>Handler filters are added + with <seealso marker="logger#add_handler_filter-3"> + <c>logger:add_handler_filter/3</c></seealso> + and removed + with <seealso marker="logger#remove_handler_filter-2"> + <c>logger:remove_handler_filter/2</c></seealso>. They can also + be specified directly in the configuration when adding a handler + with <seealso marker="logger#add_handler/3"> + <c>logger:add_handler/3</c></seealso> + or via the Kernel configuration + parameter <seealso marker="#logger_parameter"><c>logger</c></seealso>.</p> + + <p>To see which filters are currently installed in the system, + use <seealso marker="logger#get_config-0"> + <c>logger:get_config/0</c></seealso>, + or <seealso marker="logger#get_primary_config-0"> + <c>logger:get_primary_config/0</c></seealso> + and <seealso marker="logger#get_handler_config-1"> + <c>logger:get_handler_config/1</c></seealso>. Filters are + listed in the order they are applied, that is, the first + filter in the list is applied first, and so on.</p> + + <p>For convenience, the following built-in filters exist:</p> + + <taglist> + <tag><seealso marker="logger_filters#domain-2"> + <c>logger_filters:domain/2</c></seealso></tag> + <item> + <p>Provides a way of filtering log events based on a + <c>domain</c> field in <c>Metadata</c>.</p> + </item> + <tag><seealso marker="logger_filters#level-2"> + <c>logger_filters:level/2</c></seealso></tag> + <item> + <p>Provides a way of filtering log events based on the log + level.</p> + </item> + <tag><seealso marker="logger_filters#progress-2"> + <c>logger_filters:progress/2</c></seealso></tag> + <item> + <p>Stops or allows progress reports from <c>supervisor</c> + and <c>application_controller</c>.</p> + </item> + <tag><seealso marker="logger_filters#remote_gl-2"> + <c>logger_filters:remote_gl/2</c></seealso></tag> + <item> + <p>Stops or allows log events originating from a process + that has its group leader on a remote node.</p> + </item> + </taglist> + </section> + + <section> + <marker id="handlers"/> + <title>Handlers</title> + <p>A handler is defined as a module exporting at least the + following callback function:</p> + + <pre><seealso marker="logger#HModule:log-2">log(LogEvent, Config) -> void()</seealso></pre> + + <p>This function is called when a log event has passed through all + primary filters, and all handler filters attached to the handler + in question. The function call is executed on the client + process, and it is up to the handler implementation if other + processes are involved or not.</p> + + <p>Logger allows adding multiple instances of a handler + callback. That is, if a callback module implementation allows + it, you can add multiple handler instances using the same + callback module. The different instances are identified by + unique handler identities.</p> + + <p>In addition to the mandatory callback function <c>log/2</c>, a + handler module can export the optional callback + functions <c>adding_handler/1</c>, <c>changing_config/2</c> + and <c>removing_handler/1</c>. See + section <seealso marker="logger#handler_callback_functions">Handler + Callback Functions</seealso> in the logger(3) manual page for + more information about these function.</p> + + <p>The following built-in handlers exist:</p> + + <taglist> + <tag><c>logger_std_h</c></tag> + <item> + <p>This is the default handler used by OTP. Multiple instances + can be started, and each instance will write log events to a + given destination, terminal or file.</p> + </item> + + <tag><c>logger_disk_log_h</c></tag> + <item> + <p>This handler behaves much like <c>logger_std_h</c>, except it uses + <seealso marker="disk_log"><c>disk_log</c></seealso> as its + destination.</p> + </item> + + <tag><marker id="ErrorLoggerManager"/><c>error_logger</c></tag> + <item> + <p>This handler is provided for backwards compatibility + only. It is not started by default, but will be + automatically started the first time an <c>error_logger</c> + event handler is added + with <seealso marker="error_logger#add_report_handler-1"> + <c>error_logger:add_report_handler/1,2</c></seealso>.</p> + + <p>The old <c>error_logger</c> event handlers in STDLIB and + SASL still exist, but they are not added by Erlang/OTP 21.0 + or later.</p> + </item> + </taglist> + </section> + + <section> + <marker id="formatters"/> + <title>Formatters</title> + <p>A formatter can be used by the handler implementation to do the + final formatting of a log event, before printing to the + handler's destination. The handler callback receives the + formatter information as part of the handler configuration, + which is passed as the second argument + to <seealso marker="logger#HModule:log-2"> + <c>HModule:log/2</c></seealso>.</p> + <p>The formatter information consist of a formatter + module, <c>FModule</c> and its + configuration, <c>FConfig</c>. <c>FModule</c> must export the + following function, which can be called by the handler:</p> + <pre><seealso marker="logger#FModule:format-2">format(LogEvent,FConfig) + -> FormattedLogEntry</seealso></pre> + <p>The formatter information for a handler is set as a part of its + configuration when the handler is added. It can also be changed + during runtime + with <seealso marker="logger#set_handler_config-3"> + <c>logger:set_handler_config(HandlerId,formatter,{FModule,FConfig})</c> + </seealso>, which overwrites the current formatter information, + or with <seealso marker="logger#update_formatter_config-2"> + <c>logger:update_formatter_config/2,3</c></seealso>, which + only modifies the formatter configuration.</p> + <p>If the formatter module exports the optional callback + function <seealso marker="logger#FModule:check_config-1"> + <c>check_config(FConfig)</c></seealso>, Logger calls this + function when the formatter information is set or modified, to + verify the validity of the formatter configuration.</p> + <p>If no formatter information is specified for a handler, Logger + uses <c>logger_formatter</c> as default. See + the <seealso marker="logger_formatter"><c>logger_formatter(3)</c></seealso> + manual page for more information about this module.</p> + </section> + + <section> + <title>Configuration</title> + + <p>At system start, Logger is configured through Kernel + configuration parameters. The parameters that apply to Logger + are described in + section <seealso marker="#kernel_config_params">Kernel + Configuration Parameters</seealso>. Examples are found in + section <seealso marker="#config_examples">Configuration + Examples</seealso>.</p> + <p>During runtime, Logger configuration is changed via API + functions. See + section <seealso marker="logger#configuration_API">Configuration + API Functions</seealso> in the <c>logger(3)</c> manual page.</p> + + <section> + <title>Primary Logger Configuration</title> + <p>Logger API functions that apply to the primary Logger + configuration are:</p> + <list> + <item><seealso marker="logger#get_primary_config-0"> + <c>get_primary_config/0</c></seealso></item> + <item><seealso marker="logger#set_primary_config-1"> + <c>set_primary_config/1,2</c></seealso></item> + <item><seealso marker="logger#update_primary_config-1"> + <c>update_primary_config/1</c></seealso></item> + <item><seealso marker="logger#add_primary_filter-2"> + <c>add_primary_filter/2</c></seealso></item> + <item><seealso marker="logger#remove_primary_filter-1"> + <c>remove_primary_filter/1</c></seealso></item> + </list> + <p>The primary Logger configuration is a map with the following + keys:</p> + <taglist> + <tag><marker id="primary_level"/> + <c>level = </c><seealso marker="logger#type-level"> + <c>logger:level()</c></seealso><c> | all | none</c></tag> + <item> + <p>Specifies the primary log level, that is, log event that + are equally or more severe than this level, are forwarded + to the primary filters. Less severe log events are + immediately discarded.</p> + <p>See section <seealso marker="#log_level">Log + Level</seealso> for a listing and description of + possible log levels.</p> + <p>The initial value of this option is set by the Kernel + configuration parameter <seealso marker="#logger_level"> + <c>logger_level</c></seealso>. It is changed during + runtime with <seealso marker="logger#set_primary_config-2"> + <c>logger:set_primary_config(level,Level)</c></seealso>.</p> + <p>Defaults to <c>info</c>.</p> + </item> + <tag><c>filters = [{FilterId,Filter}]</c></tag> + <item> + <p>Specifies the primary filters.</p> + <list> + <item><c>FilterId = </c><seealso marker="logger#type-filter_id"> + <c>logger:filter_id()</c></seealso></item> + <item><c>Filter = </c><seealso marker="logger#type-filter"> + <c>logger:filter()</c></seealso></item> + </list> + <p>The initial value of this option is set by the Kernel + configuration + parameter <seealso marker="#logger_parameter"><c>logger</c></seealso>. + During runtime, primary filters are added and removed with + <seealso marker="logger#add_primary_filter-2"> + <c>logger:add_primary_filter/2</c></seealso> and + <seealso marker="logger#remove_primary_filter-1"> + <c>logger:remove_primary_filter/1</c></seealso>, + respectively.</p> + <p>See section <seealso marker="#filters">Filters</seealso> + for more detailed information.</p> + <p>Defaults to <c>[]</c>.</p> + </item> + <tag><c>filter_default = log | stop</c></tag> + <item> + <p>Specifies what happens to a log event if all filters + return <c>ignore</c>, or if no filters exist.</p> + <p>See section <seealso marker="#filters">Filters</seealso> + for more information about how this option is used.</p> + <p>Defaults to <c>log</c>.</p> + </item> + </taglist> + </section> + + <section> + <marker id="handler_configuration"/> + <title>Handler Configuration</title> + <p>Logger API functions that apply to handler configuration + are:</p> + <list> + <item><seealso marker="logger#get_handler_config-0"> + <c>get_handler_config/0,1</c></seealso></item> + <item><seealso marker="logger#set_handler_config-2"> + <c>set_handler_config/2,3</c></seealso></item> + <item><seealso marker="logger#update_handler_config-2"> + <c>update_handler_config/2</c></seealso></item> + <item><seealso marker="logger#add_handler_filter-3"> + <c>add_handler_filter/3</c></seealso></item> + <item><seealso marker="logger#remove_handler_filter-2"> + <c>remove_handler_filter/2</c></seealso></item> + <item><seealso marker="logger#update_formatter_config-2"> + <c>update_formatter_config/2,3</c></seealso></item> + </list> + <p>The configuration for a handler is a map with the following keys:</p> + <taglist> + <tag><c>id = </c><seealso marker="logger#type-handler_id"> + <c>logger:handler_id()</c></seealso></tag> + <item> + <p>Automatically inserted by Logger. The value is the same + as the <c>HandlerId</c> specified when adding the handler, + and it cannot be changed.</p> + </item> + <tag><c>module = module()</c></tag> + <item> + <p>Automatically inserted by Logger. The value is the same + as the <c>Module</c> specified when adding the handler, + and it cannot be changed.</p> + </item> + <tag><c>level = </c><seealso marker="logger#type-level"> + <c>logger:level()</c></seealso><c> | all | none</c></tag> + <item> + <p>Specifies the log level for the handler, that is, log + events that are equally or more severe than this level, + are forwarded to the handler filters for this + handler.</p> + <p>See section <seealso marker="#log_level">Log + Level</seealso> for a listing and description of + possible log levels.</p> + <p>The log level is specified when adding the handler, or + changed during runtime with, for + instance, <seealso marker="logger#set_handler_config/3"> + <c>logger:set_handler_config(HandlerId,level,Level)</c></seealso>. + </p> + <p>Defaults to <c>all</c>.</p> + </item> + <tag><c>filters = [{FilterId,Filter}]</c></tag> + <item> + <p>Specifies the handler filters.</p> + <list> + <item><c>FilterId = </c><seealso marker="logger#type-filter_id"> + <c>logger:filter_id()</c></seealso></item> + <item><c>Filter = </c><seealso marker="logger#type-filter"> + <c>logger:filter()</c></seealso></item> + </list> + <p>Handler filters are specified when adding the handler, + or added or removed during runtime with + <seealso marker="logger#add_handler_filter-3"> + <c>logger:add_handler_filter/3</c></seealso> and + <seealso marker="logger#remove_handler_filter-2"> + <c>logger:remove_handler_filter/2</c></seealso>, + respectively.</p> + <p>See <seealso marker="#filters">Filters</seealso> for more + detailed information.</p> + <p>Defaults to <c>[]</c>.</p> + </item> + <tag><c>filter_default = log | stop</c></tag> + <item> + <p>Specifies what happens to a log event if all filters + return <c>ignore</c>, or if no filters exist.</p> + <p>See section <seealso marker="#filters">Filters</seealso> + for more information about how this option is used.</p> + <p>Defaults to <c>log</c>.</p> + </item> + <tag><c>formatter = {FormatterModule,FormatterConfig}</c></tag> + <item> + <p>Specifies a formatter that the handler can use for + converting the log event term to a printable string.</p> + <list> + <item><c>FormatterModule = module()</c></item> + <item><c>FormatterConfig = </c> + <seealso marker="logger#type-formatter_config"> + <c>logger:formatter_config()</c></seealso></item> + </list> + <p>The formatter information is specified when adding the + handler. The formatter configuration can be changed during + runtime + with <seealso marker="logger#update_formatter_config-2"> + <c>logger:update_formatter_config/2,3</c></seealso>, + or the complete formatter information can be overwritten + with, for + instance, <seealso marker="logger#set_handler_config-3"> + <c>logger:set_handler_config/3</c></seealso>.</p> + <p>See + section <seealso marker="#formatters">Formatters</seealso> + for more detailed information.</p> + <p>Defaults + to <c>{logger_formatter,DefaultFormatterConfig}</c>. See + the <seealso marker="logger_formatter"> + <c>logger_formatter(3)</c></seealso> manual page for + information about this formatter and its default + configuration.</p> + </item> + <tag><c>config = term()</c></tag> + <item> + <p>Handler specific configuration, that is, configuration + data related to a specific handler implementation.</p> + <p>The configuration for the built-in handlers is described + in + the <seealso marker="logger_std_h"><c>logger_std_h(3)</c></seealso> + and + <seealso marker="logger_disk_log_h"><c>logger_disk_log_h(3)</c> + </seealso> manual pages.</p> + </item> + </taglist> + + <p>Notice that <c>level</c> and <c>filters</c> are obeyed by + Logger itself before forwarding the log events to each + handler, while <c>formatter</c> and all handler specific + options are left to the handler implementation.</p> + </section> + + <section> + <marker id="kernel_config_params"/> + <title>Kernel Configuration Parameters</title> + + <p>The following Kernel configuration parameters apply to + Logger:</p> + <taglist> + <tag><marker id="logger_parameter"/><c>logger = [Config]</c></tag> + <item> + <p>Specifies the configuration + for <seealso marker="logger">Logger</seealso>, except the + primary log level, which is specified + with <seealso marker="#logger_level"><c>logger_level</c></seealso>, + and the compatibility + with <seealso marker="sasl:error_logging">SASL Error + Logging</seealso>, which is specified + with <seealso marker="#logger_sasl_compatible"> + <c>logger_sasl_compatible</c></seealso>.</p> + <p>With this parameter, you can modify or disable the default + handler, add custom handlers and primary logger filters, and + set log levels per module.</p> + <p><c>Config</c> is any (zero or more) of the following:</p> + <taglist> + <tag><c>{handler, default, undefined}</c></tag> + <item> + <p>Disables the default handler. This allows another + application to add its own default handler.</p> + <p>Only one entry of this type is allowed.</p> + </item> + <tag><c>{handler, HandlerId, Module, HandlerConfig}</c></tag> + <item> + <p>If <c>HandlerId</c> is <c>default</c>, then this entry + modifies the default handler, equivalent to calling</p> + <pre><seealso marker="logger#set_handler_config-2"> + logger:set_handler_config(default, Module, HandlerConfig) + </seealso></pre> + <p>For all other values of <c>HandlerId</c>, this entry + adds a new handler, equivalent to calling</p> + <pre><seealso marker="logger:add_handler/3"> + logger:add_handler(HandlerId, Module, HandlerConfig) + </seealso></pre> + <p>Multiple entries of this type are allowed.</p></item> + <tag><c>{filters, FilterDefault, [Filter]}</c></tag> + <item> + <p>Adds the specified primary filters.</p> + <list> + <item><c>FilterDefault = log | stop</c></item> + <item><c>Filter = {FilterId, {FilterFun, FilterConfig}}</c></item> + </list> + <p>Equivalent to calling</p> + <pre><seealso marker="logger#add_primary_filter/2"> + logger:add_primary_filter(FilterId, {FilterFun, FilterConfig}) + </seealso></pre> + <p>for each <c>Filter</c>.</p> + <p><c>FilterDefault</c> specifies the behaviour if all + primary filters return <c>ignore</c>, see + section <seealso marker="#filters">Filters</seealso>.</p> + <p>Only one entry of this type is allowed.</p> + </item> + <tag><c>{module_level, Level, [Module]}</c></tag> + <item> + <p>Sets module log level for the given modules. Equivalent + to calling</p> + <pre><seealso marker="logger#set_module_level/2"> + logger:set_module_level(Module, Level)</seealso></pre> + <p>for each <c>Module</c>.</p> + <p>Multiple entries of this type are allowed.</p> + </item> + </taglist> + <p>See + section <seealso marker="#config_examples">Configuration + Examples</seealso> for examples using the <c>logger</c> + parameter for system configuration.</p> + </item> + <tag><marker id="logger_level"/> + <c>logger_level = Level</c></tag> + <item> + <p>Specifies the primary log level. See + the <seealso marker="kernel_app#logger_level"><c>kernel(6)</c></seealso> + manual page for more information about this parameter.</p> + </item> + <tag><marker id="logger_sasl_compatible"/> + <c>logger_sasl_compatible = true | false</c></tag> + <item> + <p>Specifies Logger's compatibility + with <seealso marker="sasl:error_logging">SASL Error + Logging</seealso>. See + the <seealso marker="kernel_app#logger_sasl_compatible"> + <c>kernel(6)</c></seealso> manual page for more + information about this parameter.</p> + </item> + </taglist> + </section> + + <section> + <marker id="config_examples"/> + <title>Configuration Examples</title> + <p>The value of the Kernel configuration parameter <c>logger</c> + is a list of tuples. It is possible to write the term on the + command line when starting an erlang node, but as the term + grows, a better approach is to use the system configuration + file. See + the <seealso marker="config"><c>config(4)</c></seealso> manual + page for more information about this file.</p> + <p>Each of the following examples shows a simple system + configuration file that configures Logger according to the + description.</p> + <p>Modify the default handler to print to a file instead of + <c>standard_io</c>:</p> + <code> +[{kernel, + [{logger, + [{handler, default, logger_std_h, % {handler, HandlerId, Module, + #{config => #{type => {file,"log/erlang.log"}}}} % Config} + ]}]}]. + </code> + <p>Modify the default handler to print each log event as a + single line:</p> + <code> +[{kernel, + [{logger, + [{handler, default, logger_std_h, + #{formatter => {logger_formatter, #{single_line => true}}}} + ]}]}]. + </code> + <p>Modify the default handler to print the pid of the logging + process for each log event:</p> + <code> +[{kernel, + [{logger, + [{handler, default, logger_std_h, + #{formatter => {logger_formatter, + #{template => [time," ",pid," ",msg,"\n"]}}}} + ]}]}]. + </code> + <p>Modify the default handler to only print errors and more + severe log events to "log/erlang.log", and add another handler + to print all log events to "log/debug.log".</p> + <code> +[{kernel, + [{logger, + [{handler, default, logger_std_h, + #{level => error, + config => #{type => {file, "log/erlang.log"}}}}, + {handler, info, logger_std_h, + #{level => debug, + config => #{type => {file, "log/debug.log"}}}} + ]}]}]. + </code> + </section> + + </section> + + <section> + <marker id="compatibility"/> + <title>Backwards Compatibility with error_logger</title> + <p>Logger provides backwards compatibility with + <c>error_logger</c> in the following ways:</p> + + <taglist> + <tag>API for Logging</tag> + <item> + <p>The <c>error_logger</c> API still exists, but should only + be used by legacy code. It will be removed in a later + release.</p> + <p>Calls + to <seealso marker="error_logger#error_report-1"> + <c>error_logger:error_report/1,2</c></seealso>, + <seealso marker="error_logger#error_msg-1"> + <c>error_logger:error_msg/1,2</c></seealso>, and + corresponding functions for warning and info messages, are + all forwarded to Logger as calls + to <seealso marker="logger#log-3"> + <c>logger:log(Level,Report,Metadata)</c></seealso>.</p> + <p><c>Level = error | warning | info</c> and is taken + from the function name. <c>Report</c> contains the actual + log message, and <c>Metadata</c> contains additional + information which can be used for creating backwards + compatible events for legacy <c>error_logger</c> event + handlers, see + section <seealso marker="#legacy_event_handlers">Legacy + Event Handlers</seealso>.</p> + </item> + <tag>Output Format</tag> + <item> + <p>To get log events on the same format as produced + by <c>error_logger_tty_h</c> and <c>error_logger_file_h</c>, + use the default formatter, <c>logger_formatter</c>, with + configuration parameter <c>legacy_header</c> set + to <c>true</c>. This is the default configuration of + the <c>default</c> handler started by Kernel.</p> + </item> + <tag>Default Format of Log Events from OTP</tag> + <item> + <p>By default, all log events originating from within OTP, + except the former so called "SASL reports", look the same as + before.</p> + </item> + <tag><marker id="sasl_reports"/>SASL Reports</tag> + <item> + <p>By SASL reports we mean supervisor reports, crash reports + and progress reports.</p> + <p>Prior to Erlang/OTP 21.0, these reports were only logged + when the SASL application was running, and they were printed + trough SASL's own event handlers <c>sasl_report_tty_h</c> + and <c>sasl_report_file_h</c>.</p> + <p>The destination of these log events was configured by + <seealso marker="sasl:sasl_app#deprecated_error_logger_config">SASL + configuration parameters</seealso>.</p> + <p>Due to the specific event handlers, the output format + slightly differed from other log events.</p> + <p>As of Erlang/OTP 21.0, the concept of SASL reports is + removed, meaning that the default behaviour is as + follows:</p> + <list> + <item>Supervisor reports, crash reports, and progress reports + are no longer connected to the SASL application.</item> + <item>Supervisor reports and crash reports are issued + as <c>error</c> level log events, and are logged through + the default handler started by Kernel.</item> + <item>Progress reports are issued as <c>info</c> level log + events, and since the default primary log level + is <c>notice</c>, these are not logged by default. To + enable printing of progress reports, set + the <seealso marker="#primary_level">primary log + level</seealso> to <c>info</c>.</item> + <item>The output format is the same for all log + events.</item> + </list> + <p>If the old behaviour is preferred, the Kernel configuration + parameter <seealso marker="kernel_app#logger_sasl_compatible"> + <c>logger_sasl_compatible</c></seealso> can be set + to <c>true</c>. The + <seealso marker="sasl:sasl_app#deprecated_error_logger_config">SASL + configuration parameters</seealso> can then be used as + before, and the SASL reports will only be printed if the + SASL application is running, through a second log handler + named <c>sasl</c>.</p> + <p>All SASL reports have a metadata field <c>domain</c> which + is set to <c>[otp,sasl]</c>. This field can be + used by filters to stop or allow the log events.</p> + <p>See section <seealso marker="sasl:error_logging">SASL User's + Guide</seealso> for more information about the old SASL + error logging functionality.</p> + </item> + <tag><marker id="legacy_event_handlers"/>Legacy Event Handlers</tag> + <item> + <p>To use event handlers written for <c>error_logger</c>, just + add your event handler with</p> + <code> +error_logger:add_report_handler/1,2. + </code> + <p>This automatically starts the error logger event manager, + and adds <c>error_logger</c> as a handler to Logger, with + the following configuration:</p> +<code> +#{level => info, + filter_default => log, + filters => []}. +</code> + <note> + <p>This handler ignores events that do not originate from + the <c>error_logger</c> API, or from within OTP. This + means that if your code uses the Logger API for logging, + then your log events will be discarded by this + handler.</p> + <p>The handler is not overload protected.</p> + </note> + </item> + </taglist> + </section> + + + <section> + <title>Error Handling</title> + <p>Logger does, to a certain extent, check its input data before + forwarding a log event to filters and handlers. It does, + however, not evaluate report callbacks, or check the validity of + format strings and arguments. This means that all filters and + handlers must be careful when formatting the data of a log + event, making sure that it does not crash due to bad input data + or faulty callbacks.</p> + <p>If a filter or handler still crashes, Logger will remove the + filter or handler in question from the configuration, and print + a short error message to the terminal. A debug event containing + the crash reason and other details is also issued.</p> + <p>See section <seealso marker="#log_message">Log + Message</seealso> for more information about report callbacks + and valid forms of log messages.</p> + </section> + + <section> + <title>Example: Add a handler to log info events to file</title> + <p>When starting an Erlang node, the default behaviour is that all + log events on level <c>notice</c> or more severe, are logged to + the terminal via the default handler. To also log info events, + you can either change the primary log level to <c>info</c>:</p> + <pre> +1> <input>logger:set_primary_config(level, info).</input> +ok</pre> + <p>or set the level for one or a few modules only:</p> + <pre> +2> <input>logger:set_module_level(mymodule, info).</input> +ok</pre> + <p>This allows info events to pass through to the default handler, + and be printed to the terminal as well. If there are many info + events, it can be useful to print these to a file instead.</p> + <p>First, set the log level of the default handler + to <c>notice</c>, preventing it from printing info events to the + terminal:</p> + <pre> +3> <input>logger:set_handler_config(default, level, notice).</input> +ok</pre> + <p>Then, add a new handler which prints to file. You can use the + handler + module <seealso marker="logger_std_h"><c>logger_std_h</c></seealso>, + and specify type <c>{file,File}</c>.:</p> + <pre> +4> <input>Config = #{config => #{type => {file,"./info.log"}}, level => info}.</input> +#{config => #{type => {file,"./info.log"}},level => info} +5> <input>logger:add_handler(myhandler, logger_std_h, Config).</input> +ok</pre> + <p>Since <c>filter_default</c> defaults to <c>log</c>, this + handler now receives all log events. If you want info events + only in the file, you must add a filter to stop all non-info + events. The built-in + filter <seealso marker="logger_filters#level-2"> + <c>logger_filters:level/2</c></seealso> + can do this:</p> + <pre> +6> <input>logger:add_handler_filter(myhandler, stop_non_info, + {fun logger_filters:level/2, {stop, neq, info}}).</input> +ok</pre> + <p>See section <seealso marker="#filters">Filters</seealso> for + more information about the filters and the <c>filter_default</c> + configuration parameter.</p> + + </section> + + <section> + <title>Example: Implement a handler</title> + <p>Section <seealso marker="logger#handler_callback_functions">Handler + Callback Functions</seealso> in the logger(3) manual page + describes the callback functions that can be implemented for a + Logger handler.</p> + <p>A handler callback module must export:</p> + <list> + <item><c>log(Log, Config)</c></item> + </list> + <p>It can optionally also export some, or all, of the following:</p> + <list> + <item><c>adding_handler(Config)</c></item> + <item><c>removing_handler(Config)</c></item> + <item><c>changing_config(OldConfig, NewConfig)</c></item> + </list> + <p>When a handler is added, by for example a call + to <seealso marker="logger#add_handler-3"> + <c>logger:add_handler(Id, HModule, Config)</c></seealso>, + Logger first calls <c>HModule:adding_handler(Config)</c>. If + this function returns <c>{ok,Config1}</c>, Logger + writes <c>Config1</c> to the configuration database, and + the <c>logger:add_handler/3</c> call returns. After this, the + handler is installed and must be ready to receive log events as + calls to <c>HModule:log/2</c>.</p> + <p>A handler can be removed by calling + <seealso marker="logger#remove_handler-1"> + <c>logger:remove_handler(Id)</c></seealso>. Logger calls + <c>HModule:removing_handler(Config)</c>, and removes the + handler's configuration from the configuration database.</p> + <p>When <seealso marker="logger#set_handler_config-2"> + <c>logger:set_handler_config/2,3</c></seealso> + or <seealso marker="logger#update_handler_config/2"> + <c>logger:update_handler_config/2</c></seealso> is called, + Logger + calls <c>HModule:changing_config(OldConfig, NewConfig)</c>. If + this function returns <c>{ok,NewConfig1}</c>, Logger + writes <c>NewConfig1</c> to the configuration database.</p> + + <p>A simple handler that prints to the terminal can be implemented + as follows:</p> + <code> +-module(myhandler1). +-export([log/2]). + +log(LogEvent, #{formatter := {FModule, FConfig}}) -> + io:put_chars(FModule:format(LogEvent, FConfig)). + </code> + + <p>Notice that the above handler does not have any overload + protection, and all log events are printed directly from the + client process.</p> + <p>For information and examples of overload protection, please + refer to + section <seealso marker="#overload_protection">Protecting the + Handler from Overload</seealso>, and the implementation + of <seealso marker="logger_std_h"><c>logger_std_h</c></seealso> + and <seealso marker="logger_disk_log_h"><c>logger_disk_log_h</c> + </seealso>.</p> + <p>The following is a simpler example of a handler which logs to a + file through one single process:</p> + <code> +-module(myhandler2). +-export([adding_handler/1, removing_handler/1, log/2]). +-export([init/1, handle_call/3, handle_cast/2, terminate/2]). + +adding_handler(Config) -> + MyConfig = maps:get(config,Config,#{file => "myhandler2.log"}), + {ok, Pid} = gen_server:start(?MODULE, MyConfig, []), + {ok, Config#{config => MyConfig#{pid => Pid}}}. + +removing_handler(#{config := #{pid := Pid}}) -> + gen_server:stop(Pid). + +log(LogEvent,#{config := #{pid := Pid}} = Config) -> + gen_server:cast(Pid, {log, LogEvent, Config}). + +init(#{file := File}) -> + {ok, Fd} = file:open(File, [append, {encoding, utf8}]), + {ok, #{file => File, fd => Fd}}. + +handle_call(_, _, State) -> + {reply, {error, bad_request}, State}. + +handle_cast({log, LogEvent, Config}, #{fd := Fd} = State) -> + do_log(Fd, LogEvent, Config), + {noreply, State}. + +terminate(_Reason, #{fd := Fd}) -> + _ = file:close(Fd), + ok. + +do_log(Fd, LogEvent, #{formatter := {FModule, FConfig}}) -> + String = FModule:format(LogEvent, FConfig), + io:put_chars(Fd, String). + </code> + </section> + + <section> + <marker id="overload_protection"/> + <title>Protecting the Handler from Overload</title> + <p>The default handlers, <seealso marker="logger_std_h"> + <c>logger_std_h</c></seealso> and <seealso marker="logger_disk_log_h"> + <c>logger_disk_log_h</c></seealso>, feature an overload protection + mechanism, which makes it possible for the handlers to survive, + and stay responsive, during periods of high load (when huge + numbers of incoming log requests must be handled). + The mechanism works as follows:</p> + + <section> + <title>Message Queue Length</title> + <p>The handler process keeps track of the length of its message + queue and takes some form of action when the current length exceeds a + configurable threshold. The purpose is to keep the handler in, or to + as quickly as possible get the handler into, a state where it can + keep up with the pace of incoming log events. The memory use of the + handler must never grow larger and larger, since that will eventually + cause the handler to crash. These three thresholds, with associated + actions, exist:</p> + + <taglist> + <tag><c>sync_mode_qlen</c></tag> + <item> + <p>As long as the length of the message queue is lower than this + value, all log events are handled asynchronously. This means that + the client process sending the log event, by calling a log function + in the <seealso marker="logger_chapter#logger_api">Logger API</seealso>, + does not wait for a response from the handler but continues + executing immediately after the event is sent. It is not affected + by the time it takes the handler to print the event to the log + device. If the message queue grows larger than this value, + the handler starts handling log events synchronously instead, + meaning that the client process sending the event must wait for a + response. When the handler reduces the message queue to a + level below the <c>sync_mode_qlen</c> threshold, asynchronous + operation is resumed. The switch from asynchronous to synchronous + mode can slow down the logging tempo of one, or a few, busy senders, + but cannot protect the handler sufficiently in a situation of many + busy concurrent senders.</p> + <p>Defaults to <c>10</c> messages.</p> + </item> + <tag><c>drop_mode_qlen</c></tag> + <item> + <p>When the message queue grows larger than this threshold, the + handler switches to a mode in which it drops all new events that + senders want to log. Dropping an event in this mode means that the + call to the log function never results in a message being sent to + the handler, but the function returns without taking any action. + The handler keeps logging the events that are already in its message + queue, and when the length of the message queue is reduced to a level + below the threshold, synchronous or asynchronous mode is resumed. + Notice that when the handler activates or deactivates drop mode, + information about it is printed in the log.</p> + <p>Defaults to <c>200</c> messages.</p> + </item> + <tag><c>flush_qlen</c></tag> + <item> + <p>If the length of the message queue grows larger than this threshold, + a flush (delete) operation takes place. To flush events, the handler + discards the messages in the message queue by receiving them in a + loop without logging. Client processes waiting for a response from a + synchronous log request receive a reply from the handler indicating + that the request is dropped. The handler process increases its + priority during the flush loop to make sure that no new events + are received during the operation. Notice that after the flush operation + is performed, the handler prints information in the log about how many + events have been deleted.</p> + <p>Defaults to <c>1000</c> messages.</p> + </item> + </taglist> + + <p>For the overload protection algorithm to work properly, it is + required that:</p> + + <p><c>sync_mode_qlen =< drop_mode_qlen =< flush_qlen</c></p> + + <p>and that:</p> + + <p><c>drop_mode_qlen > 1</c></p> + + <p>To disable certain modes, do the following:</p> + <list> + <item>If <c>sync_mode_qlen</c> is set to <c>0</c>, all log events are handled + synchronously. That is, asynchronous logging is disabled.</item> + <item>If <c>sync_mode_qlen</c> is set to the same value as + <c>drop_mode_qlen</c>, synchronous mode is disabled. That is, the handler + always runs in asynchronous mode, unless dropping or flushing is invoked.</item> + <item>If <c>drop_mode_qlen</c> is set to the same value as <c>flush_qlen</c>, + drop mode is disabled and can never occur.</item> + </list> + + <p>During high load scenarios, the length of the handler message queue + rarely grows in a linear and predictable way. Instead, whenever the + handler process is scheduled in, it can have an almost arbitrary number + of messages waiting in the message queue. It is for this reason that the overload + protection mechanism is focused on acting quickly, and quite drastically, + such as immediately dropping or flushing messages, when a large queue length + is detected.</p> + + <p>The values of the previously listed thresholds can be specified by the user. + This way, a handler can be configured to, for example, not drop or flush + messages unless the message queue length of the handler process grows extremely + large. Notice that large amounts of memory can be required for the node under such + circumstances. Another example of user configuration is when, for performance + reasons, the client processes must never be blocked by synchronous log requests. + It is possible, perhaps, that dropping or flushing events is still acceptable, since + it does not affect the performance of the client processes sending the log events.</p> + + <p>A configuration example:</p> + <code type="none"> +logger:add_handler(my_standard_h, logger_std_h, + #{config => #{type => {file,"./system_info.log"}, + sync_mode_qlen => 100, + drop_mode_qlen => 1000, + flush_qlen => 2000}}). + </code> + </section> + + <section> + <title>Controlling Bursts of Log Requests</title> + <p>Large bursts of log events - many events received by the handler + under a short period of time - can potentially cause problems, such as:</p> + <list> + <item>Log files grow very large, very quickly.</item> + <item>Circular logs wrap too quickly so that important data is overwritten.</item> + <item>Write buffers grow large, which slows down file sync operations.</item> + </list> + + <p>For this reason, both built-in handlers offer the possibility to specify the + maximum number of events to be handled within a certain time frame. + With this burst control feature enabled, the handler can avoid choking the log with + massive amounts of printouts. The configuration parameters are:</p> + <taglist> + <tag><c>burst_limit_enable</c></tag> + <item> + <p>Value <c>true</c> enables burst control and <c>false</c> disables it.</p> + <p>Defaults to <c>true</c>.</p> + </item> + <tag><c>burst_limit_max_count</c></tag> + <item> + <p>This is the maximum number of events to handle within a + <c>burst_limit_window_time</c> time frame. After the limit is + reached, successive events are dropped until the end of the time frame.</p> + <p>Defaults to <c>500</c> events.</p> + </item> + <tag><c>burst_limit_window_time</c></tag> + <item> + <p>See the previous description of <c>burst_limit_max_count</c>.</p> + <p>Defaults to <c>1000</c> milliseconds.</p> + </item> + </taglist> + + <p>A configuration example:</p> + <code type="none"> +logger:add_handler(my_disk_log_h, logger_disk_log_h, + #{config => #{file => "./my_disk_log", + burst_limit_enable => true, + burst_limit_max_count => 20, + burst_limit_window_time => 500}}). + </code> + </section> + + <section> + <title>Terminating an Overloaded Handler</title> + <p>It is possible that a handler, even if it can successfully manage peaks + of high load without crashing, can build up a large message queue, or use a + large amount of memory. The overload protection mechanism includes an + automatic termination and restart feature for the purpose of guaranteeing + that a handler does not grow out of bounds. The feature is configured + with the following parameters:</p> + <taglist> + <tag><c>overload_kill_enable</c></tag> + <item> + <p>Value <c>true</c> enables the feature and <c>false</c> disables it.</p> + <p>Defaults to <c>false</c>.</p> + </item> + <tag><c>overload_kill_qlen</c></tag> + <item> + <p>This is the maximum allowed queue length. If the message queue grows + larger than this, the handler process is terminated.</p> + <p>Defaults to <c>20000</c> messages.</p> + </item> + <tag><c>overload_kill_mem_size</c></tag> + <item> + <p>This is the maximum memory size that the handler process is allowed to use. + If the handler grows larger than this, the process is terminated.</p> + <p>Defaults to <c>3000000</c> bytes.</p> + </item> + <tag><c>overload_kill_restart_after</c></tag> + <item> + <p>If the handler is terminated, it restarts automatically after a + delay specified in milliseconds. The value <c>infinity</c> prevents + restarts.</p> + <p>Defaults to <c>5000</c> milliseconds.</p> + </item> + </taglist> + <p>If the handler process is terminated because of overload, it prints + information about it in the log. It also prints information about when a + restart has taken place, and the handler is back in action.</p> + <note> + <p>The sizes of the log events affect the memory needs of the handler. + For information about how to limit the size of log events, see the + <seealso marker="logger_formatter"><c>logger_formatter(3)</c></seealso> + manual page.</p> + </note> + </section> + </section> + + <section> + <title>See Also</title> + <p> + <seealso marker="disk_log"><c>disk_log(3)</c></seealso>, + <seealso marker="error_logger"><c>error_logger(3)</c></seealso>, + <seealso marker="logger"><c>logger(3)</c></seealso>, + <seealso marker="logger_disk_log_h"><c>logger_disk_log_h(3)</c></seealso>, + <seealso marker="logger_filters"><c>logger_filters(3)</c></seealso>, + <seealso marker="logger_formatter"><c>logger_formatter(3)</c></seealso>, + <seealso marker="logger_std_h"><c>logger_std_h(3)</c></seealso>, + <seealso marker="sasl:sasl_app"><c>sasl(6)</c></seealso></p> + </section> +</chapter> |